From 2c6482091f01ba104cf8ee549aa5c717e80d43ea Mon Sep 17 00:00:00 2001 From: Przemyslaw Patynowski Date: Wed, 27 Jul 2022 11:19:40 +0200 Subject: i40e: Fix tunnel checksum offload with fragmented traffic Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski Signed-off-by: Mateusz Palczewski Tested-by: Marek Szlosek Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index f6ba97a0166e..d4226161a3ef 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3203,11 +3203,13 @@ static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, protocol = vlan_get_protocol(skb); - if (eth_p_mpls(protocol)) + if (eth_p_mpls(protocol)) { ip.hdr = skb_inner_network_header(skb); - else + l4.hdr = skb_checksum_start(skb); + } else { ip.hdr = skb_network_header(skb); - l4.hdr = skb_checksum_start(skb); + l4.hdr = skb_transport_header(skb); + } /* set the tx_flags to indicate the IP protocol type. this is * required so that checksum header computation below is accurate. -- cgit v1.2.3 From 57c942bc3bef0970f0b21f8e0998e76a900ea80d Mon Sep 17 00:00:00 2001 From: Alan Brady Date: Tue, 2 Aug 2022 10:19:17 +0200 Subject: i40e: Fix to stop tx_timeout recovery if GLOBR fails When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady Signed-off-by: Mateusz Palczewski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index b36bf9c3e1e4..9f1d5de7bf16 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -384,7 +384,9 @@ static void i40e_tx_timeout(struct net_device *netdev, unsigned int txqueue) set_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state); break; default: - netdev_err(netdev, "tx_timeout recovery unsuccessful\n"); + netdev_err(netdev, "tx_timeout recovery unsuccessful, device is in non-recoverable state.\n"); + set_bit(__I40E_DOWN_REQUESTED, pf->state); + set_bit(__I40E_VSI_DOWN_REQUESTED, vsi->state); break; } -- cgit v1.2.3