From b8222335938a9c6425b9f14e61c3ca67c8189dfc Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 12 Dec 2018 15:46:16 -0800 Subject: ARM: dts: Fix wrong address for omap5 sata phy Looks like I missed converting the omap5 sata phy addresses to use offset from the module base instead of full physical address. While at it, we can also more it to be a direct child of the interconnect target module, it is not really a child of the ocp2scp control device. Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4.dtsi | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 5e00147522b6..2e926dd38b08 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -515,19 +515,19 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x20>; - ranges = <0 0 0x4000>; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x6000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin>, - <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - #phy-cells = <0>; - }; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin>, + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + #phy-cells = <0>; }; }; -- cgit v1.2.3