From 9f801abc3d4fe1e770268ae4e610556e79be6fca Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 20 Sep 2014 19:53:08 -0400 Subject: fm10k: Add support for IEEE DCBx This patch adds support for management of the limited QOS features of the FM10000 interface. Specifically we can support up to 8 traffic classes, however the part only provides 1 Rx and 1 Tx FIFO in the host interface and as a result this can lead to head-of-line blocking on Rx. This can be avoided by setting PFC only for priorities that cannot afford to drop frames. Signed-off-by: Alexander Duyck Acked-by: John Fastabend Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/fm10k/Makefile | 3 +- drivers/net/ethernet/intel/fm10k/fm10k.h | 5 +- drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c | 174 +++++++++++++++++++++++++ drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 7 +- 4 files changed, 185 insertions(+), 4 deletions(-) create mode 100644 drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c diff --git a/drivers/net/ethernet/intel/fm10k/Makefile b/drivers/net/ethernet/intel/fm10k/Makefile index 70565abfc62a..502362584165 100644 --- a/drivers/net/ethernet/intel/fm10k/Makefile +++ b/drivers/net/ethernet/intel/fm10k/Makefile @@ -29,4 +29,5 @@ obj-$(CONFIG_FM10K) += fm10k.o fm10k-objs := fm10k_main.o fm10k_common.o fm10k_pci.o \ fm10k_netdev.o fm10k_ethtool.o fm10k_pf.o fm10k_vf.o \ - fm10k_mbx.o fm10k_iov.o fm10k_tlv.o + fm10k_mbx.o fm10k_iov.o fm10k_tlv.o \ + fm10k_dcbnl.o diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index fb718719c196..33a59493094c 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -307,7 +307,7 @@ struct fm10k_intfc { /* VXLAN port tracking information */ struct list_head vxlan_port; -#if defined(HAVE_DCBNL_IEEE) && defined(CONFIG_DCB) +#ifdef CONFIG_DCB u8 pfc_en; #endif u8 rx_pause; @@ -467,4 +467,7 @@ int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int rate, int unused); int fm10k_ndo_get_vf_config(struct net_device *netdev, int vf_idx, struct ifla_vf_info *ivi); + +/* DCB */ +void fm10k_dcbnl_set_ops(struct net_device *dev); #endif /* _FM10K_H_ */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c b/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c new file mode 100644 index 000000000000..212a92dad222 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c @@ -0,0 +1,174 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k.h" + +#ifdef CONFIG_DCB +/** + * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device + * @dev: netdev interface for the device + * @ets: ETS structure to push configuration to + **/ +static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets) +{ + int i; + + /* we support 8 TCs in all modes */ + ets->ets_cap = IEEE_8021QAZ_MAX_TCS; + ets->cbs = 0; + + /* we only support strict priority and cannot do traffic shaping */ + memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw)); + memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw)); + memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa)); + + /* populate the prio map based on the netdev */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device + * @dev: netdev interface for the device + * @ets: ETS structure to pull configuration from + **/ +static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets) +{ + u8 num_tc = 0; + int i, err; + + /* verify type and determine num_tcs needed */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i]) + return -EINVAL; + if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT) + return -EINVAL; + if (ets->prio_tc[i] > num_tc) + num_tc = ets->prio_tc[i]; + } + + /* if requested TC is greater than 0 then num_tcs is max + 1 */ + if (num_tc) + num_tc++; + + if (num_tc > IEEE_8021QAZ_MAX_TCS) + return -EINVAL; + + /* update TC hardware mapping if necessary */ + if (num_tc != netdev_get_num_tc(dev)) { + err = fm10k_setup_tc(dev, num_tc); + if (err) + return err; + } + + /* update priority mapping */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device + * @dev: netdev interface for the device + * @pfc: PFC structure to push configuration to + **/ +static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* record flow control max count and state of TCs */ + pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; + pfc->pfc_en = interface->pfc_en; + + return 0; +} + +/** + * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device + * @dev: netdev interface for the device + * @pfc: PFC structure to pull configuration from + **/ +static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* record PFC configuration to interface */ + interface->pfc_en = pfc->pfc_en; + + /* if we are running update the drop_en state for all queues */ + if (netif_running(dev)) + fm10k_update_rx_drop_en(interface); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device + * @dev: netdev interface for the device + * + * Returns that we support only IEEE DCB for this interface + **/ +static u8 fm10k_dcbnl_getdcbx(struct net_device *dev) +{ + return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; +} + +/** + * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device + * @dev: netdev interface for the device + * @mode: new mode for this device + * + * Returns error on attempt to enable anything but IEEE DCB for this interface + **/ +static u8 fm10k_dcbnl_setdcbx(struct net_device *dev, u8 mode) +{ + return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0; +} + +static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = { + .ieee_getets = fm10k_dcbnl_ieee_getets, + .ieee_setets = fm10k_dcbnl_ieee_setets, + .ieee_getpfc = fm10k_dcbnl_ieee_getpfc, + .ieee_setpfc = fm10k_dcbnl_ieee_setpfc, + + .getdcbx = fm10k_dcbnl_getdcbx, + .setdcbx = fm10k_dcbnl_setdcbx, +}; + +#endif /* CONFIG_DCB */ +/** + * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev + * @dev: netdev interface for the device + * + * Enables PF for DCB by assigning DCBNL ops pointer. + **/ +void fm10k_dcbnl_set_ops(struct net_device *dev) +{ +#ifdef CONFIG_DCB + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + + if (hw->mac.type == fm10k_mac_pf) + dev->dcbnl_ops = &fm10k_dcbnl_ops; +#endif /* CONFIG_DCB */ +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 7935c1aad6d5..04ca7f2ab385 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -649,7 +649,7 @@ static void fm10k_configure_rx_ring(struct fm10k_intfc *interface, fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl); /* Enable drop on empty */ -#if defined(HAVE_DCBNL_IEEE) && defined(CONFIG_DCB) +#ifdef CONFIG_DCB if (interface->pfc_en) rx_pause = interface->pfc_en; #endif @@ -688,7 +688,7 @@ void fm10k_update_rx_drop_en(struct fm10k_intfc *interface) u8 rx_pause = interface->rx_pause; int i; -#if defined(HAVE_DCBNL_IEEE) && defined(CONFIG_DCB) +#ifdef CONFIG_DCB if (interface->pfc_en) rx_pause = interface->pfc_en; @@ -1556,6 +1556,9 @@ static int fm10k_sw_init(struct fm10k_intfc *interface, netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL; } + /* initialize DCBNL interface */ + fm10k_dcbnl_set_ops(netdev); + /* Initialize service timer and service task */ set_bit(__FM10K_SERVICE_DISABLE, &interface->state); setup_timer(&interface->service_timer, &fm10k_service_timer, -- cgit v1.2.3