From e879f855e590b40fe3c79f2fbd8f65ca3c724120 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sun, 15 Aug 2021 12:18:52 -0700 Subject: bus: ti-sysc: Add break in switch statement in sysc_init_soc() After commit a6d90e9f2232 ("bus: ti-sysc: AM3: RNG is GP only"), clang with -Wimplicit-fallthrough enabled warns: drivers/bus/ti-sysc.c:2958:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/bus/ti-sysc.c:2958:3: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's version of this warning is a little bit more pedantic than GCC's. Add the missing break to satisfy it to match what has been done all over the kernel tree. Fixes: a6d90e9f2232 ("bus: ti-sysc: AM3: RNG is GP only") Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 148a4dd8cb9a..10fcb75df68a 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2955,6 +2955,7 @@ static int sysc_init_soc(struct sysc *ddata) break; case SOC_AM3: sysc_add_disabled(0x48310000); /* rng */ + break; default: break; } -- cgit v1.2.3 From 863580418bc82062083be854355f2213d3d804f5 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 1 Sep 2021 14:43:50 +0300 Subject: regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name Fix a typo in the pm8009 LDO7 declaration, it uses resource name ldo%s6 instead of ldo%s7. Fixes: 951384cabc5d ("regulator: qcom-rpmh-regulator: add pm8009-1 chip revision") Signed-off-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210901114350.1106073-1-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown --- drivers/regulator/qcom-rpmh-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 6cca910a76de..7f458d510483 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -991,7 +991,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = { RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"), RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"), RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"), - RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l7"), {} }; -- cgit v1.2.3 From 1fd95c05d8f742abfe906620780aee4dbe1a2db0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 2 Sep 2021 11:36:01 -0400 Subject: ext4: add error checking to ext4_ext_replay_set_iblocks() If the call to ext4_map_blocks() fails due to an corrupted file system, ext4_ext_replay_set_iblocks() can get stuck in an infinite loop. This could be reproduced by running generic/526 with a file system that has inline_data and fast_commit enabled. The system will repeatedly log to the console: EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076 and the stack that it gets stuck in is: ext4_block_to_path+0xe3/0x130 ext4_ind_map_blocks+0x93/0x690 ext4_map_blocks+0x100/0x660 skip_hole+0x47/0x70 ext4_ext_replay_set_iblocks+0x223/0x440 ext4_fc_replay_inode+0x29e/0x3b0 ext4_fc_replay+0x278/0x550 do_one_pass+0x646/0xc10 jbd2_journal_recover+0x14a/0x270 jbd2_journal_load+0xc4/0x150 ext4_load_journal+0x1f3/0x490 ext4_fill_super+0x22d4/0x2c00 With this patch, generic/526 still fails, but system is no longer locking up in a tight loop. It's likely the root casue is that fast_commit replay is corrupting file systems with inline_data, and we probably need to add better error handling in the fast commit replay code path beyond what is done here, which essentially just breaks the infinite loop without reporting the to the higher levels of the code. Fixes: 8016E29F4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Cc: Harshad Shirwadkar Signed-off-by: Theodore Ts'o --- fs/ext4/extents.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index eb1dd4f024f2..e57019cc3601 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -5913,7 +5913,7 @@ void ext4_ext_replay_shrink_inode(struct inode *inode, ext4_lblk_t end) } /* Check if *cur is a hole and if it is, skip it */ -static void skip_hole(struct inode *inode, ext4_lblk_t *cur) +static int skip_hole(struct inode *inode, ext4_lblk_t *cur) { int ret; struct ext4_map_blocks map; @@ -5922,9 +5922,12 @@ static void skip_hole(struct inode *inode, ext4_lblk_t *cur) map.m_len = ((inode->i_size) >> inode->i_sb->s_blocksize_bits) - *cur; ret = ext4_map_blocks(NULL, inode, &map, 0); + if (ret < 0) + return ret; if (ret != 0) - return; + return 0; *cur = *cur + map.m_len; + return 0; } /* Count number of blocks used by this inode and update i_blocks */ @@ -5973,7 +5976,9 @@ int ext4_ext_replay_set_iblocks(struct inode *inode) * iblocks by total number of differences found. */ cur = 0; - skip_hole(inode, &cur); + ret = skip_hole(inode, &cur); + if (ret < 0) + goto out; path = ext4_find_extent(inode, cur, NULL, 0); if (IS_ERR(path)) goto out; @@ -5992,8 +5997,12 @@ int ext4_ext_replay_set_iblocks(struct inode *inode) } cur = max(cur + 1, le32_to_cpu(ex->ee_block) + ext4_ext_get_actual_len(ex)); - skip_hole(inode, &cur); - + ret = skip_hole(inode, &cur); + if (ret < 0) { + ext4_ext_drop_refs(path); + kfree(path); + break; + } path2 = ext4_find_extent(inode, cur, NULL, 0); if (IS_ERR(path2)) { ext4_ext_drop_refs(path); -- cgit v1.2.3 From 0ddc5e55e6f1da1286fb2646f4248bf7da31a601 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 3 Sep 2021 09:29:07 +0100 Subject: Documentation: Fix irq-domain.rst build warning Correctly escape the * not to be used as emphasis. Also take this opportunity to clarify the fate of the rest of the legacy APIs. Reported-by: Stephen Rothwell Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210903085343.923036-1-maz@kernel.org --- Documentation/core-api/irq/irq-domain.rst | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst index 6979b4af2c1f..9c0e8758037a 100644 --- a/Documentation/core-api/irq/irq-domain.rst +++ b/Documentation/core-api/irq/irq-domain.rst @@ -175,9 +175,10 @@ for IRQ numbers that are passed to struct device registrations. In that case the Linux IRQ numbers cannot be dynamically assigned and the legacy mapping should be used. -As the name implies, the *_legacy() functions are deprecated and only +As the name implies, the \*_legacy() functions are deprecated and only exist to ease the support of ancient platforms. No new users should be -added. +added. Same goes for the \*_simple() functions when their use results +in the legacy behaviour. The legacy map assumes a contiguous range of IRQ numbers has already been allocated for the controller and that the IRQ number can be -- cgit v1.2.3 From 5457773ef99f25fcc4b238ac76b68e28273250f4 Mon Sep 17 00:00:00 2001 From: Tobias Schramm Date: Fri, 27 Aug 2021 07:03:57 +0200 Subject: spi: rockchip: handle zero length transfers without timing out Previously zero length transfers submitted to the Rokchip SPI driver would time out in the SPI layer. This happens because the SPI peripheral does not trigger a transfer completion interrupt for zero length transfers. Fix that by completing zero length transfers immediately at start of transfer. Signed-off-by: Tobias Schramm Link: https://lore.kernel.org/r/20210827050357.165409-1-t.schramm@manjaro.org Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 540861ca2ba3..553b6b9d0222 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -600,6 +600,12 @@ static int rockchip_spi_transfer_one( int ret; bool use_dma; + /* Zero length transfers won't trigger an interrupt on completion */ + if (!xfer->len) { + spi_finalize_current_transfer(ctlr); + return 1; + } + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); -- cgit v1.2.3 From 4df031ff5876d94b48dd9ee486ba5522382a06b2 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:21 +0800 Subject: ext4: check and update i_disksize properly After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize"), i_disksize could always be updated to i_size in ext4_setattr(), and we could sure that i_disksize <= i_size since holding inode lock and if i_disksize < i_size there are delalloc writes pending in the range upto i_size. If the end of the current write is <= i_size, there's no need to touch i_disksize since writeback will push i_disksize upto i_size eventually. So we can switch to check i_size instead of i_disksize in ext4_da_write_end() when write to the end of the file. we also could remove ext4_mark_inode_dirty() together because we defer inode dirtying to generic_write_end() or ext4_da_write_inline_data_end(). Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com --- fs/ext4/inode.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2c33c795c4a7..76d9e25fe62c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3084,35 +3084,37 @@ static int ext4_da_write_end(struct file *file, end = start + copied - 1; /* - * generic_write_end() will run mark_inode_dirty() if i_size - * changes. So let's piggyback the i_disksize mark_inode_dirty - * into that. + * Since we are holding inode lock, we are sure i_disksize <= + * i_size. We also know that if i_disksize < i_size, there are + * delalloc writes pending in the range upto i_size. If the end of + * the current write is <= i_size, there's no need to touch + * i_disksize since writeback will push i_disksize upto i_size + * eventually. If the end of the current write is > i_size and + * inside an allocated block (ext4_da_should_update_i_disksize() + * check), we need to update i_disksize here as neither + * ext4_writepage() nor certain ext4_writepages() paths not + * allocating blocks update i_disksize. + * + * Note that we defer inode dirtying to generic_write_end() / + * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > EXT4_I(inode)->i_disksize) { + if (copied && new_i_size > inode->i_size) { if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) { + ext4_da_should_update_i_disksize(page, end)) ext4_update_i_disksize(inode, new_i_size); - /* We need to mark inode dirty even if - * new_i_size is less that inode->i_size - * bu greater than i_disksize.(hint delalloc) - */ - ret = ext4_mark_inode_dirty(handle, inode); - } } if (write_mode != CONVERT_INLINE_DATA && ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && ext4_has_inline_data(inode)) - ret2 = ext4_da_write_inline_data_end(inode, pos, len, copied, + ret = ext4_da_write_inline_data_end(inode, pos, len, copied, page); else - ret2 = generic_write_end(file, mapping, pos, len, copied, + ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - copied = ret2; - if (ret2 < 0) - ret = ret2; + copied = ret; ret2 = ext4_journal_stop(handle); if (unlikely(ret2 && !ret)) ret = ret2; -- cgit v1.2.3 From 55ce2f649b9e88111270333a8127e23f4f8f42d7 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:22 +0800 Subject: ext4: correct the error path of ext4_write_inline_data_end() Current error path of ext4_write_inline_data_end() is not correct. Firstly, it should pass out the error value if ext4_get_inode_loc() return fail, or else it could trigger infinite loop if we inject error here. And then it's better to add inode to orphan list if it return fail in ext4_journal_stop(), otherwise we could not restore inline xattr entry after power failure. Finally, we need to reset the 'ret' value if ext4_write_inline_data_end() return success in ext4_write_end() and ext4_journalled_write_end(), otherwise we could not get the error return value of ext4_journal_stop(). Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com --- fs/ext4/inline.c | 15 +++++---------- fs/ext4/inode.c | 7 +++++-- 2 files changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 70cb64db33f7..28b666f25ac2 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -733,25 +733,20 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, void *kaddr; struct ext4_iloc iloc; - if (unlikely(copied < len)) { - if (!PageUptodate(page)) { - copied = 0; - goto out; - } - } + if (unlikely(copied < len) && !PageUptodate(page)) + return 0; ret = ext4_get_inode_loc(inode, &iloc); if (ret) { ext4_std_error(inode->i_sb, ret); - copied = 0; - goto out; + return ret; } ext4_write_lock_xattr(inode, &no_expand); BUG_ON(!ext4_has_inline_data(inode)); kaddr = kmap_atomic(page); - ext4_write_inline_data(inode, &iloc, kaddr, pos, len); + ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); kunmap_atomic(kaddr); SetPageUptodate(page); /* clear page dirty so that writepages wouldn't work for us. */ @@ -760,7 +755,7 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, ext4_write_unlock_xattr(inode, &no_expand); brelse(iloc.bh); mark_inode_dirty(inode); -out: + return copied; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 76d9e25fe62c..2baa17285096 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1295,6 +1295,7 @@ static int ext4_write_end(struct file *file, goto errout; } copied = ret; + ret = 0; } else copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); @@ -1321,13 +1322,14 @@ static int ext4_write_end(struct file *file, if (i_size_changed || inline_data) ret = ext4_mark_inode_dirty(handle, inode); +errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside * inode->i_size. So truncate them */ ext4_orphan_add(handle, inode); -errout: + ret2 = ext4_journal_stop(handle); if (!ret) ret = ret2; @@ -1410,6 +1412,7 @@ static int ext4_journalled_write_end(struct file *file, goto errout; } copied = ret; + ret = 0; } else if (unlikely(copied < len) && !PageUptodate(page)) { copied = 0; ext4_journalled_zero_new_buffers(handle, page, from, to); @@ -1439,6 +1442,7 @@ static int ext4_journalled_write_end(struct file *file, ret = ret2; } +errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -1446,7 +1450,6 @@ static int ext4_journalled_write_end(struct file *file, */ ext4_orphan_add(handle, inode); -errout: ret2 = ext4_journal_stop(handle); if (!ret) ret = ret2; -- cgit v1.2.3 From 6984aef59814fb5c47b0e30c56e101186b5ebf8c Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:23 +0800 Subject: ext4: factor out write end code of inline file Now that the inline_data file write end procedure are falled into the common write end functions, it is not clear. Factor them out and do some cleanup. This patch also drop ext4_da_write_inline_data_end() and switch to use ext4_write_inline_data_end() instead because we also need to do the same error processing if we failed to write data into inline entry. Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com --- fs/ext4/ext4.h | 3 -- fs/ext4/inline.c | 117 +++++++++++++++++++++++++++++-------------------------- fs/ext4/inode.c | 73 +++++++++++----------------------- 3 files changed, 84 insertions(+), 109 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index d71dcac3b97f..ea6c0aae8f1b 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -3533,9 +3533,6 @@ extern int ext4_da_write_inline_data_begin(struct address_space *mapping, unsigned flags, struct page **pagep, void **fsdata); -extern int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page); extern int ext4_try_add_inline_entry(handle_t *handle, struct ext4_filename *fname, struct inode *dir, struct inode *inode); diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 28b666f25ac2..d30709d42a27 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -729,34 +729,76 @@ convert: int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, unsigned copied, struct page *page) { - int ret, no_expand; + handle_t *handle = ext4_journal_current_handle(); + int no_expand; void *kaddr; struct ext4_iloc iloc; + int ret = 0, ret2; if (unlikely(copied < len) && !PageUptodate(page)) - return 0; + copied = 0; - ret = ext4_get_inode_loc(inode, &iloc); - if (ret) { - ext4_std_error(inode->i_sb, ret); - return ret; - } + if (likely(copied)) { + ret = ext4_get_inode_loc(inode, &iloc); + if (ret) { + unlock_page(page); + put_page(page); + ext4_std_error(inode->i_sb, ret); + goto out; + } + ext4_write_lock_xattr(inode, &no_expand); + BUG_ON(!ext4_has_inline_data(inode)); - ext4_write_lock_xattr(inode, &no_expand); - BUG_ON(!ext4_has_inline_data(inode)); + kaddr = kmap_atomic(page); + ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); + kunmap_atomic(kaddr); + SetPageUptodate(page); + /* clear page dirty so that writepages wouldn't work for us. */ + ClearPageDirty(page); - kaddr = kmap_atomic(page); - ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); - kunmap_atomic(kaddr); - SetPageUptodate(page); - /* clear page dirty so that writepages wouldn't work for us. */ - ClearPageDirty(page); + ext4_write_unlock_xattr(inode, &no_expand); + brelse(iloc.bh); - ext4_write_unlock_xattr(inode, &no_expand); - brelse(iloc.bh); - mark_inode_dirty(inode); + /* + * It's important to update i_size while still holding page + * lock: page writeout could otherwise come in and zero + * beyond i_size. + */ + ext4_update_inode_size(inode, pos + copied); + } + unlock_page(page); + put_page(page); + + /* + * Don't mark the inode dirty under page lock. First, it unnecessarily + * makes the holding time of page lock longer. Second, it forces lock + * ordering of page lock and transaction start for journaling + * filesystems. + */ + if (likely(copied)) + mark_inode_dirty(inode); +out: + /* + * If we didn't copy as much data as expected, we need to trim back + * size of xattr containing inline data. + */ + if (pos + len > inode->i_size && ext4_can_truncate(inode)) + ext4_orphan_add(handle, inode); - return copied; + ret2 = ext4_journal_stop(handle); + if (!ret) + ret = ret2; + if (pos + len > inode->i_size) { + ext4_truncate_failed_write(inode); + /* + * If truncate failed early the inode might still be + * on the orphan list; we need to make sure the inode + * is removed from the orphan list in that case. + */ + if (inode->i_nlink) + ext4_orphan_del(NULL, inode); + } + return ret ? ret : copied; } struct buffer_head * @@ -937,43 +979,6 @@ out: return ret; } -int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page) -{ - int ret; - - ret = ext4_write_inline_data_end(inode, pos, len, copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - return ret; - } - copied = ret; - - /* - * No need to use i_size_read() here, the i_size - * cannot change under us because we hold i_mutex. - * - * But it's important to update i_size while still holding page lock: - * page writeout could otherwise come in and zero beyond i_size. - */ - if (pos+copied > inode->i_size) - i_size_write(inode, pos+copied); - unlock_page(page); - put_page(page); - - /* - * Don't mark the inode dirty under page lock. First, it unnecessarily - * makes the holding time of page lock longer. Second, it forces lock - * ordering of page lock and transaction start for journaling - * filesystems. - */ - mark_inode_dirty(inode); - - return copied; -} - #ifdef INLINE_DIR_DEBUG void ext4_show_inline_dir(struct inode *dir, struct buffer_head *bh, void *inline_start, int inline_size) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2baa17285096..b80f15bba727 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1282,23 +1282,14 @@ static int ext4_write_end(struct file *file, loff_t old_size = inode->i_size; int ret = 0, ret2; int i_size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_write_end(inode, pos, len, copied); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else - copied = block_write_end(file, mapping, pos, - len, copied, page, fsdata); + + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); /* * it's important to update i_size while still holding page lock: * page writeout could otherwise come in and zero beyond i_size. @@ -1319,10 +1310,9 @@ static int ext4_write_end(struct file *file, * ordering of page lock and transaction start for journaling * filesystems. */ - if (i_size_changed || inline_data) + if (i_size_changed) ret = ext4_mark_inode_dirty(handle, inode); -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -1394,7 +1384,6 @@ static int ext4_journalled_write_end(struct file *file, int partial = 0; unsigned from, to; int size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_journalled_write_end(inode, pos, len, copied); @@ -1403,17 +1392,10 @@ static int ext4_journalled_write_end(struct file *file, BUG_ON(!ext4_handle_valid(handle)); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else if (unlikely(copied < len) && !PageUptodate(page)) { + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + if (unlikely(copied < len) && !PageUptodate(page)) { copied = 0; ext4_journalled_zero_new_buffers(handle, page, from, to); } else { @@ -1436,13 +1418,12 @@ static int ext4_journalled_write_end(struct file *file, if (old_size < pos && !verity) pagecache_isize_extended(inode, old_size, pos); - if (size_changed || inline_data) { + if (size_changed) { ret2 = ext4_mark_inode_dirty(handle, inode); if (!ret) ret = ret2; } -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -3072,7 +3053,7 @@ static int ext4_da_write_end(struct file *file, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - int ret = 0, ret2; + int ret; handle_t *handle = ext4_journal_current_handle(); loff_t new_i_size; unsigned long start, end; @@ -3083,6 +3064,12 @@ static int ext4_da_write_end(struct file *file, len, copied, page, fsdata); trace_ext4_da_write_end(inode, pos, len, copied); + + if (write_mode != CONVERT_INLINE_DATA && + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && + ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + start = pos & (PAGE_SIZE - 1); end = start + copied - 1; @@ -3102,26 +3089,12 @@ static int ext4_da_write_end(struct file *file, * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > inode->i_size) { - if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) - ext4_update_i_disksize(inode, new_i_size); - } - - if (write_mode != CONVERT_INLINE_DATA && - ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && - ext4_has_inline_data(inode)) - ret = ext4_da_write_inline_data_end(inode, pos, len, copied, - page); - else - ret = generic_write_end(file, mapping, pos, len, copied, - page, fsdata); - - copied = ret; - ret2 = ext4_journal_stop(handle); - if (unlikely(ret2 && !ret)) - ret = ret2; + if (copied && new_i_size > inode->i_size && + ext4_da_should_update_i_disksize(page, end)) + ext4_update_i_disksize(inode, new_i_size); + copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata); + ret = ext4_journal_stop(handle); return ret ? ret : copied; } -- cgit v1.2.3 From cc883236b79297f6266ca6f4e7f24f3fd3c736c1 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:24 +0800 Subject: ext4: drop unnecessary journal handle in delalloc write After we factor out the inline data write procedure from ext4_da_write_end(), we don't need to start journal handle for the cases of both buffer overwrite and append-write. If we need to update i_disksize, mark_inode_dirty() do start handle and update inode buffer. So we could just remove all the journal handle codes in the delalloc write procedure. After this patch, we could get a lot of performance improvement. Below is the Unixbench comparison data test on my machine with 'Intel Xeon Gold 5120' CPU and nvme SSD backend. Test cmd: ./Run -c 56 -i 3 fstime fsbuffer fsdisk Before this patch: System Benchmarks Partial Index BASELINE RESULT INDEX File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1 File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9 File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0 ====== System Benchmarks Index Score (Partial Only) 1186.6 After this patch: System Benchmarks Partial Index BASELINE RESULT INDEX File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3 File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7 ====== System Benchmarks Index Score (Partial Only) 2053.0 Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-5-yi.zhang@huawei.com --- fs/ext4/inode.c | 60 +++++---------------------------------------------------- 1 file changed, 5 insertions(+), 55 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b80f15bba727..502f60621bad 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2910,19 +2910,6 @@ static int ext4_nonda_switch(struct super_block *sb) return 0; } -/* We always reserve for an inode update; the superblock could be there too */ -static int ext4_da_write_credits(struct inode *inode, loff_t pos, unsigned len) -{ - if (likely(ext4_has_feature_large_file(inode->i_sb))) - return 1; - - if (pos + len <= 0x7fffffffULL) - return 1; - - /* We might need to update the superblock to set LARGE_FILE */ - return 2; -} - static int ext4_da_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata) @@ -2931,7 +2918,6 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, struct page *page; pgoff_t index; struct inode *inode = mapping->host; - handle_t *handle; if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) return -EIO; @@ -2957,41 +2943,11 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, return 0; } - /* - * grab_cache_page_write_begin() can take a long time if the - * system is thrashing due to memory pressure, or if the page - * is being written back. So grab it first before we start - * the transaction handle. This also allows us to allocate - * the page (if needed) without using GFP_NOFS. - */ -retry_grab: +retry: page = grab_cache_page_write_begin(mapping, index, flags); if (!page) return -ENOMEM; - unlock_page(page); - - /* - * With delayed allocation, we don't log the i_disksize update - * if there is delayed block allocation. But we still need - * to journalling the i_disksize update if writes to the end - * of file which has an already mapped buffer. - */ -retry_journal: - handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, - ext4_da_write_credits(inode, pos, len)); - if (IS_ERR(handle)) { - put_page(page); - return PTR_ERR(handle); - } - lock_page(page); - if (page->mapping != mapping) { - /* The page got truncated from under us */ - unlock_page(page); - put_page(page); - ext4_journal_stop(handle); - goto retry_grab; - } /* In case writeback began while the page was unlocked */ wait_for_stable_page(page); @@ -3003,20 +2959,18 @@ retry_journal: #endif if (ret < 0) { unlock_page(page); - ext4_journal_stop(handle); + put_page(page); /* * block_write_begin may have instantiated a few blocks * outside i_size. Trim these off again. Don't need - * i_size_read because we hold i_mutex. + * i_size_read because we hold inode lock. */ if (pos + len > inode->i_size) ext4_truncate_failed_write(inode); if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) - goto retry_journal; - - put_page(page); + goto retry; return ret; } @@ -3053,8 +3007,6 @@ static int ext4_da_write_end(struct file *file, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - int ret; - handle_t *handle = ext4_journal_current_handle(); loff_t new_i_size; unsigned long start, end; int write_mode = (int)(unsigned long)fsdata; @@ -3093,9 +3045,7 @@ static int ext4_da_write_end(struct file *file, ext4_da_should_update_i_disksize(page, end)) ext4_update_i_disksize(inode, new_i_size); - copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - ret = ext4_journal_stop(handle); - return ret ? ret : copied; + return generic_write_end(file, mapping, pos, len, copied, page, fsdata); } /* -- cgit v1.2.3 From 31692ab9a9ef0119959f66838de74eeb37490c8d Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Thu, 5 Aug 2021 21:04:16 +0200 Subject: media: hantro: Fix check for single irq Some cores use only one interrupt and in such case interrupt name in DT is not needed. Driver supposedly accounted that, but due to the wrong field check it never worked. Fix that. Fixes: 18d6c8b7b4c9 ("media: hantro: add fallback handling for single irq/clk") Signed-off-by: Jernej Skrabec Reviewed-by: Ezequiel Garcia Reviewed-by: Emil Velikov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/hantro/hantro_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c index 8a2edd67f2c6..20e508158871 100644 --- a/drivers/staging/media/hantro/hantro_drv.c +++ b/drivers/staging/media/hantro/hantro_drv.c @@ -919,7 +919,7 @@ static int hantro_probe(struct platform_device *pdev) if (!vpu->variant->irqs[i].handler) continue; - if (vpu->variant->num_clocks > 1) { + if (vpu->variant->num_irqs > 1) { irq_name = vpu->variant->irqs[i].name; irq = platform_get_irq_byname(vpu->pdev, irq_name); } else { -- cgit v1.2.3 From 132c88614f2b3548cd3c8979a434609019db4151 Mon Sep 17 00:00:00 2001 From: Nicolas Dufresne Date: Thu, 19 Aug 2021 16:00:09 +0200 Subject: media: cedrus: Fix SUNXI tile size calculation Tiled formats requires full rows being allocated (even for Chroma planes). When the number of Luma tiles is odd, we need to round up to twice the tile width in order to roundup the number of Chroma tiles. This was notice with a crash running BA1_FT_C compliance test using sunxi tiles using GStreamer. Cedrus driver would allocate 9 rows for Luma, but only 4.5 rows for Chroma, causing userspace to crash. Signed-off-by: Nicolas Dufresne Fixes: 50e761516f2b8 ("media: platform: Add Cedrus VPU decoder driver") Reviewed-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/sunxi/cedrus/cedrus_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c index c589fe9dae70..825af5fd35e0 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c @@ -135,7 +135,7 @@ void cedrus_prepare_format(struct v4l2_pix_format *pix_fmt) sizeimage = bytesperline * height; /* Chroma plane size. */ - sizeimage += bytesperline * height / 2; + sizeimage += bytesperline * ALIGN(height, 64) / 2; break; -- cgit v1.2.3 From 26391e49d5b0f0c33eb4b28a312d2ecc094d7489 Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch Date: Wed, 25 Aug 2021 13:42:13 +0200 Subject: mmc: dw_mmc: Only inject fault before done/error The fault injection function can set EVENT_DATA_ERROR but skip the setting of ->data_status to an error status if it hits just after a data over interrupt. This confuses the tasklet which can later end up triggering the WARN_ON(host->cmd || ..) in dw_mci_request_end() since dw_mci_data_complete() would return success. Prevent the fault injection function from doing this since this is not a real case, and ensure that the fault injection doesn't race with a real error either. Signed-off-by: Vincent Whitchurch Reviewed-by: Jaehoon Chung Fixes: 2b8ac062f337 ("mmc: dw_mmc: Add data CRC error injection") Link: https://lore.kernel.org/r/20210825114213.7429-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 6578cc64ae9e..380f9aa56eb2 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1802,10 +1802,15 @@ static enum hrtimer_restart dw_mci_fault_timer(struct hrtimer *t) spin_lock_irqsave(&host->irq_lock, flags); - if (!host->data_status) + /* + * Only inject an error if we haven't already got an error or data over + * interrupt. + */ + if (!host->data_status) { host->data_status = SDMMC_INT_DCRC; - set_bit(EVENT_DATA_ERROR, &host->pending_events); - tasklet_schedule(&host->tasklet); + set_bit(EVENT_DATA_ERROR, &host->pending_events); + tasklet_schedule(&host->tasklet); + } spin_unlock_irqrestore(&host->irq_lock, flags); @@ -2721,12 +2726,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & DW_MCI_DATA_ERROR_FLAGS) { + spin_lock(&host->irq_lock); + /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); host->data_status = pending; smp_wmb(); /* drain writebuffer */ set_bit(EVENT_DATA_ERROR, &host->pending_events); tasklet_schedule(&host->tasklet); + + spin_unlock(&host->irq_lock); } if (pending & SDMMC_INT_DATA_OVER) { -- cgit v1.2.3 From b81bede4d138ce62f7342e27bf55ac93c8071818 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 26 Aug 2021 10:21:07 +0200 Subject: mmc: renesas_sdhi: fix regression with hard reset on old SDHIs Old SDHI instances have a default value for the reset register which keeps it in reset state by default. So, when applying a hard reset we need to manually leave the soft reset state as well. Later SDHI instances have a different default value, the one we write manually now. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Signed-off-by: Wolfram Sang Tested-by: Geert Uytterhoeven Reported-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826082107.47299-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 6fc4cf3c9dce..a4407f391f66 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -561,6 +561,8 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host) /* Unknown why but without polling reset status, it will hang */ read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, false, priv->rstc); + /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); priv->needs_adjust_hs400 = false; renesas_sdhi_set_clock(host, host->clk_cache); } else if (priv->scc_ctl) { -- cgit v1.2.3 From 3ad02c27d89d72b3b49ac51899144b7d0942f05f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 7 Sep 2021 06:40:22 +0200 Subject: media: s5p-jpeg: rename JPEG marker constants to prevent build warnings The use of a macro named 'RST' conflicts with one of the same name in arch/mips/include/asm/mach-rc32434/rb.h. This causes build warnings on some MIPS builds. Change the names of the JPEG marker constants to be in their own namespace to fix these build warnings and to prevent other similar problems in the future. Fixes these build warnings: In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:14: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 | ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:13: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c:12: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-core.c:31: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) Also update the kernel-doc so that the word "marker" is not repeated. Link: https://lore.kernel.org/linux-media/20210907044022.30602-1-rdunlap@infradead.org Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Andrzej Pietrasiewicz Cc: Jacek Anaszewski Cc: Sylwester Nawrocki Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-jpeg/jpeg-core.c | 18 +++++++++--------- drivers/media/platform/s5p-jpeg/jpeg-core.h | 28 ++++++++++++++-------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index d402e456f27d..7d0ab19c38bb 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -1140,8 +1140,8 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, continue; length = 0; switch (c) { - /* SOF0: baseline JPEG */ - case SOF0: + /* JPEG_MARKER_SOF0: baseline JPEG */ + case JPEG_MARKER_SOF0: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1172,7 +1172,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, notfound = 0; break; - case DQT: + case JPEG_MARKER_DQT: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1185,7 +1185,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, skip(&jpeg_buffer, length); break; - case DHT: + case JPEG_MARKER_DHT: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1198,15 +1198,15 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, skip(&jpeg_buffer, length); break; - case SOS: + case JPEG_MARKER_SOS: sos = jpeg_buffer.curr - 2; /* 0xffda */ break; /* skip payload-less markers */ - case RST ... RST + 7: - case SOI: - case EOI: - case TEM: + case JPEG_MARKER_RST ... JPEG_MARKER_RST + 7: + case JPEG_MARKER_SOI: + case JPEG_MARKER_EOI: + case JPEG_MARKER_TEM: break; /* skip uninteresting payload markers */ diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h index a77d93c098ce..8473a019bb5f 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h @@ -37,15 +37,15 @@ #define EXYNOS3250_IRQ_TIMEOUT 0x10000000 /* a selection of JPEG markers */ -#define TEM 0x01 -#define SOF0 0xc0 -#define DHT 0xc4 -#define RST 0xd0 -#define SOI 0xd8 -#define EOI 0xd9 -#define SOS 0xda -#define DQT 0xdb -#define DHP 0xde +#define JPEG_MARKER_TEM 0x01 +#define JPEG_MARKER_SOF0 0xc0 +#define JPEG_MARKER_DHT 0xc4 +#define JPEG_MARKER_RST 0xd0 +#define JPEG_MARKER_SOI 0xd8 +#define JPEG_MARKER_EOI 0xd9 +#define JPEG_MARKER_SOS 0xda +#define JPEG_MARKER_DQT 0xdb +#define JPEG_MARKER_DHP 0xde /* Flags that indicate a format can be used for capture/output */ #define SJPEG_FMT_FLAG_ENC_CAPTURE (1 << 0) @@ -187,11 +187,11 @@ struct s5p_jpeg_marker { * @fmt: driver-specific format of this queue * @w: image width * @h: image height - * @sos: SOS marker's position relative to the buffer beginning - * @dht: DHT markers' positions relative to the buffer beginning - * @dqt: DQT markers' positions relative to the buffer beginning - * @sof: SOF0 marker's position relative to the buffer beginning - * @sof_len: SOF0 marker's payload length (without length field itself) + * @sos: JPEG_MARKER_SOS's position relative to the buffer beginning + * @dht: JPEG_MARKER_DHT' positions relative to the buffer beginning + * @dqt: JPEG_MARKER_DQT' positions relative to the buffer beginning + * @sof: JPEG_MARKER_SOF0's position relative to the buffer beginning + * @sof_len: JPEG_MARKER_SOF0's payload length (without length field itself) * @size: image buffer size in bytes */ struct s5p_jpeg_q_data { -- cgit v1.2.3 From 3c10ffddc61f8a1a59e29a110ba70b47e679206a Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Thu, 2 Sep 2021 22:04:00 +0300 Subject: net: xfrm: fix shift-out-of-bounds in xfrm_get_default Syzbot hit shift-out-of-bounds in xfrm_get_default. The problem was in missing validation check for user data. up->dirmask comes from user-space, so we need to check if this value is less than XFRM_USERPOLICY_DIRMASK_MAX to avoid shift-out-of-bounds bugs. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") Reported-and-tested-by: syzbot+b2be9dd8ca6f6c73ee2d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 03b66d154b2b..4719a6d54aa6 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -2005,6 +2005,11 @@ static int xfrm_get_default(struct sk_buff *skb, struct nlmsghdr *nlh, return -EMSGSIZE; } + if (up->dirmask >= XFRM_USERPOLICY_DIRMASK_MAX) { + kfree_skb(r_skb); + return -EINVAL; + } + r_up = nlmsg_data(r_nlh); r_up->action = ((net->xfrm.policy_default & (1 << up->dirmask)) >> up->dirmask); -- cgit v1.2.3 From 58eafe1ff52ee1ce255759fc15729519af180cbb Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Sep 2021 13:44:36 -0500 Subject: ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic The SoundWire BEs make use of 'stream' functions for .prepare and .trigger. These functions will in turn force a Bank Switch, which implies a wait operation. Mark SoundWire BEs as nonatomic for consistency, but keep all other types of BEs as is. The initialization of .nonatomic is done outside of the create_sdw_dailink helper to avoid adding more parameters to deal with a single exception to the rule that BEs are atomic. Suggested-by: Takashi Iwai Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/sof_sdw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 6602eda89e8e..6b06248a9327 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -929,6 +929,11 @@ static int create_sdw_dailink(struct snd_soc_card *card, cpus + *cpu_id, cpu_dai_num, codecs, codec_num, NULL, &sdw_ops); + /* + * SoundWire DAILINKs use 'stream' functions and Bank Switch operations + * based on wait_for_completion(), tag them as 'nonatomic'. + */ + dai_links[*be_index].nonatomic = true; ret = set_codec_init_func(card, link, dai_links + (*be_index)++, playback, group_id); -- cgit v1.2.3 From 5a80dea93191d55840f42252ed3e4565a125a514 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Thu, 9 Sep 2021 14:55:33 +0800 Subject: ASoC: mediatek: add required config dependency Because SND_SOC_MT8195 depends on COMPILE_TEST, it's possible to build MT8195 driver in many different config combinations. Add all dependent config for SND_SOC_MT8195 in case some errors happen when COMPILE_TEST is enabled. Signed-off-by: Trevor Wu Reported-by: Randy Dunlap Link: https://lore.kernel.org/r/20210909065533.2114-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index 5a2f4667d50b..81ad2dcee9eb 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config SND_SOC_MEDIATEK tristate + select REGMAP_MMIO config SND_SOC_MT2701 tristate "ASoC support for Mediatek MT2701 chip" @@ -188,7 +189,9 @@ config SND_SOC_MT8192_MT6359_RT1015_RT5682 config SND_SOC_MT8195 tristate "ASoC support for Mediatek MT8195 chip" depends on ARCH_MEDIATEK || COMPILE_TEST + depends on COMMON_CLK select SND_SOC_MEDIATEK + select MFD_SYSCON if SND_SOC_MT6359 help This adds ASoC platform driver support for Mediatek MT8195 chip that can be used with other codecs. -- cgit v1.2.3 From 2bab94090b01bc593d8bc25f68df41f198721173 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 6 Sep 2021 21:53:58 -0700 Subject: spi: tegra20-slink: Declare runtime suspend and resume functions conditionally The following build error is seen with CONFIG_PM=n. drivers/spi/spi-tegra20-slink.c:1188:12: error: 'tegra_slink_runtime_suspend' defined but not used drivers/spi/spi-tegra20-slink.c:1200:12: error: 'tegra_slink_runtime_resume' defined but not used Declare the functions only if PM is enabled. While at it, remove the unnecessary forward declarations. Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20210907045358.2138282-1-linux@roeck-us.net Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-slink.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index ebd27f883033..8ce840c7ecc8 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -204,9 +204,6 @@ struct tegra_slink_data { struct dma_async_tx_descriptor *tx_dma_desc; }; -static int tegra_slink_runtime_suspend(struct device *dev); -static int tegra_slink_runtime_resume(struct device *dev); - static inline u32 tegra_slink_readl(struct tegra_slink_data *tspi, unsigned long reg) { @@ -1185,6 +1182,7 @@ static int tegra_slink_resume(struct device *dev) } #endif +#ifdef CONFIG_PM static int tegra_slink_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -1210,6 +1208,7 @@ static int tegra_slink_runtime_resume(struct device *dev) } return 0; } +#endif /* CONFIG_PM */ static const struct dev_pm_ops slink_pm_ops = { SET_RUNTIME_PM_OPS(tegra_slink_runtime_suspend, -- cgit v1.2.3 From 0add491df4e5e2c8cc6eeeaa6dbcca50f932090c Mon Sep 17 00:00:00 2001 From: Eric Whitney Date: Thu, 19 Aug 2021 10:49:26 -0400 Subject: ext4: remove extent cache entries when truncating inline data Conditionally remove all cached extents belonging to an inode when truncating its inline data. It's only necessary to attempt to remove cached extents when a conversion from inline to extent storage has been initiated (!EXT4_STATE_MAY_INLINE_DATA). This avoids unnecessary es lock overhead in the more common inline case. Signed-off-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210819144927.25163-2-enwlinux@gmail.com Signed-off-by: Theodore Ts'o --- fs/ext4/inline.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 50a3031bf466..39a1ab129fdc 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -7,6 +7,7 @@ #include #include #include +#include #include "ext4_jbd2.h" #include "ext4.h" @@ -1918,6 +1919,24 @@ int ext4_inline_data_truncate(struct inode *inode, int *has_inline) EXT4_I(inode)->i_disksize = i_size; if (i_size < inline_size) { + /* + * if there's inline data to truncate and this file was + * converted to extents after that inline data was written, + * the extent status cache must be cleared to avoid leaving + * behind stale delayed allocated extent entries + */ + if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { +retry: + err = ext4_es_remove_extent(inode, 0, EXT_MAX_BLOCKS); + if (err == -ENOMEM) { + cond_resched(); + congestion_wait(BLK_RW_ASYNC, HZ/50); + goto retry; + } + if (err) + goto out_error; + } + /* Clear the content in the xattr space. */ if (inline_size > EXT4_MIN_INLINE_DATA_SIZE) { if ((err = ext4_xattr_ibody_find(inode, &i, &is)) != 0) -- cgit v1.2.3 From 948ca5f30e1df0c11eb5b0f410b9ceb97fa77ad9 Mon Sep 17 00:00:00 2001 From: Eric Whitney Date: Thu, 19 Aug 2021 10:49:27 -0400 Subject: ext4: enforce buffer head state assertion in ext4_da_map_blocks Remove the code that re-initializes a buffer head with an invalid block number and BH_New and BH_Delay bits when a matching delayed and unwritten block has been found in the extent status cache. Replace it with assertions that verify the buffer head already has this state correctly set. The current code masked an inline data truncation bug that left stale entries in the extent status cache. With this change, generic/130 can be used to reproduce and detect that bug. Signed-off-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210819144927.25163-3-enwlinux@gmail.com Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 8204176256c8..2a076d236ba1 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1706,13 +1706,16 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock, } /* - * Delayed extent could be allocated by fallocate. - * So we need to check it. + * the buffer head associated with a delayed and not unwritten + * block found in the extent status cache must contain an + * invalid block number and have its BH_New and BH_Delay bits + * set, reflecting the state assigned when the block was + * initially delayed allocated */ - if (ext4_es_is_delayed(&es) && !ext4_es_is_unwritten(&es)) { - map_bh(bh, inode->i_sb, invalid_block); - set_buffer_new(bh); - set_buffer_delay(bh); + if (ext4_es_is_delonly(&es)) { + BUG_ON(bh->b_blocknr != invalid_block); + BUG_ON(!buffer_new(bh)); + BUG_ON(!buffer_delay(bh)); return 0; } -- cgit v1.2.3 From 26be23af1866eead5a29f8501f9d774ac277d0bd Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Thu, 9 Sep 2021 16:54:49 +0200 Subject: MAINTAINERS: fix update references to stm32 audio bindings The 00d38fd8d2524 ("MAINTAINERS: update references to stm32 audio bindings") commit update the bindings reference, by removing bindings/sound/st,stm32-adfsdm.txt, to set the new reference to bindings/iio/adc/st,stm32-*.yaml. This leads to "get_maintainer finds" the match for the Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml, but also to the IIO bindings Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml And The commit fixes only a part of the problem: Documentation/devicetree/bindings/sound/st,stm32-*.txt file have been also moved to yaml. Update references to include all stm32 audio bindings file and exclude the st,stm32-adc.yaml bindings file. cc: Mauro Carvalho Chehab Fixes: 0d38fd8d2524 ("MAINTAINERS: update references to stm32 audio bindings") Signed-off-by: Arnaud Pouliquen Link: https://lore.kernel.org/r/20210909145449.24388-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mark Brown --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c6b8a720c0bc..33d99e9cf3e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17718,7 +17718,8 @@ M: Olivier Moysan M: Arnaud Pouliquen L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/iio/adc/st,stm32-*.yaml +F: Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +F: Documentation/devicetree/bindings/sound/st,stm32-*.yaml F: sound/soc/stm/ STM32 TIMER/LPTIMER DRIVERS -- cgit v1.2.3 From b8a30b4171b9a3c22ef0605ed74a21544d00c680 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:49 +0300 Subject: fs/ntfs3: Remove unnecesarry mount option noatime MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove unnecesarry mount option noatime because this will be handled by VFS. Our option parser will never get opt like this. Acked-by: Christian Brauner Reviewed-by: Christoph Hellwig Reviewed-by: Pali Rohár Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- Documentation/filesystems/ntfs3.rst | 4 ---- fs/ntfs3/super.c | 7 ------- 2 files changed, 11 deletions(-) diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst index ffe9ea0c1499..af7158de6fde 100644 --- a/Documentation/filesystems/ntfs3.rst +++ b/Documentation/filesystems/ntfs3.rst @@ -85,10 +85,6 @@ acl Support POSIX ACLs (Access Control Lists). Effective if supported by Kernel. Not to be confused with NTFS ACLs. The option specified as acl enables support for POSIX ACLs. -noatime All files and directories will not update their last access - time attribute if a partition is mounted with this parameter. - This option can speed up file system operation. - =============================================================================== ToDo list diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 55bbc9200a10..a18b99a3e3b5 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -223,7 +223,6 @@ enum Opt { Opt_nohidden, Opt_showmeta, Opt_acl, - Opt_noatime, Opt_nls, Opt_prealloc, Opt_no_acs_rules, @@ -242,7 +241,6 @@ static const match_table_t ntfs_tokens = { { Opt_sparse, "sparse" }, { Opt_nohidden, "nohidden" }, { Opt_acl, "acl" }, - { Opt_noatime, "noatime" }, { Opt_showmeta, "showmeta" }, { Opt_nls, "nls=%s" }, { Opt_prealloc, "prealloc" }, @@ -333,9 +331,6 @@ static noinline int ntfs_parse_options(struct super_block *sb, char *options, ntfs_err(sb, "support for ACL not compiled in!"); return -EINVAL; #endif - case Opt_noatime: - sb->s_flags |= SB_NOATIME; - break; case Opt_showmeta: opts->showmeta = 1; break; @@ -587,8 +582,6 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) seq_puts(m, ",prealloc"); if (sb->s_flags & SB_POSIXACL) seq_puts(m, ",acl"); - if (sb->s_flags & SB_NOATIME) - seq_puts(m, ",noatime"); return 0; } -- cgit v1.2.3 From c2c389fd6c6b0393549578997744b03822dd2b24 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:50 +0300 Subject: fs/ntfs3: Remove unnecesarry remount flag handling Remove unnecesarry remount flag handling. This does not do anything for this driver. We have already set SB_NODIRATIME when we fill super. Also noatime should be set from mount option. Now for some reson we try to set it when remounting. Lazytime part looks like it is copied from f2fs and there is own mount parameter for it. That is why they use it. We do not set lazytime anywhere in our code. So basically this just blocks lazytime when remounting. Acked-by: Christian Brauner Reviewed-by: Christoph Hellwig Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index a18b99a3e3b5..6cb689605089 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -417,8 +417,6 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *data) clear_mount_options(&old_opts); - *flags = (*flags & ~SB_LAZYTIME) | (sb->s_flags & SB_LAZYTIME) | - SB_NODIRATIME | SB_NOATIME; ntfs_info(sb, "re-mounted. Opts: %s", orig_data); err = 0; goto out; -- cgit v1.2.3 From 564c97bdfa39c7d1f331841fb24da6e714693037 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:51 +0300 Subject: fs/ntfs3: Convert mount options to pointer in sbi Use pointer to mount options. We want to do this because we will use new mount api which will benefit that we have spi and mount options in different allocations. When we remount we do not have to make whole new spi it is enough that we will allocate just mount options. Please note that we can do example remount lot cleaner but things will change in next patch so this should be just functional. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/attrib.c | 2 +- fs/ntfs3/dir.c | 8 ++++---- fs/ntfs3/file.c | 4 ++-- fs/ntfs3/inode.c | 12 ++++++------ fs/ntfs3/ntfs_fs.h | 2 +- fs/ntfs3/super.c | 31 +++++++++++++++++++------------ fs/ntfs3/xattr.c | 2 +- 7 files changed, 34 insertions(+), 27 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 34c4cbf7e29b..b1055b284c60 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -529,7 +529,7 @@ add_alloc_in_same_attr_seg: } else if (pre_alloc == -1) { pre_alloc = 0; if (type == ATTR_DATA && !name_len && - sbi->options.prealloc) { + sbi->options->prealloc) { CLST new_alen2 = bytes_to_cluster( sbi, get_pre_allocated(new_size)); pre_alloc = new_alen2 - new_alen; diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 93f6d485564e..40440df021ef 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -24,7 +24,7 @@ int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const struct le_str *uni, int ret, uni_len, warn; const __le16 *ip; u8 *op; - struct nls_table *nls = sbi->options.nls; + struct nls_table *nls = sbi->options->nls; static_assert(sizeof(wchar_t) == sizeof(__le16)); @@ -186,7 +186,7 @@ int ntfs_nls_to_utf16(struct ntfs_sb_info *sbi, const u8 *name, u32 name_len, { int ret, slen; const u8 *end; - struct nls_table *nls = sbi->options.nls; + struct nls_table *nls = sbi->options->nls; u16 *uname = uni->name; static_assert(sizeof(wchar_t) == sizeof(u16)); @@ -301,10 +301,10 @@ static inline int ntfs_filldir(struct ntfs_sb_info *sbi, struct ntfs_inode *ni, return 0; /* Skip meta files. Unless option to show metafiles is set. */ - if (!sbi->options.showmeta && ntfs_is_meta_file(sbi, ino)) + if (!sbi->options->showmeta && ntfs_is_meta_file(sbi, ino)) return 0; - if (sbi->options.nohidden && (fname->dup.fa & FILE_ATTRIBUTE_HIDDEN)) + if (sbi->options->nohidden && (fname->dup.fa & FILE_ATTRIBUTE_HIDDEN)) return 0; name_len = ntfs_utf16_to_nls(sbi, (struct le_str *)&fname->name_len, diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 424450e77ad5..fef57141b161 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -737,7 +737,7 @@ int ntfs3_setattr(struct user_namespace *mnt_userns, struct dentry *dentry, umode_t mode = inode->i_mode; int err; - if (sbi->options.no_acs_rules) { + if (sbi->options->no_acs_rules) { /* "No access rules" - Force any changes of time etc. */ attr->ia_valid |= ATTR_FORCE; /* and disable for editing some attributes. */ @@ -1185,7 +1185,7 @@ static int ntfs_file_release(struct inode *inode, struct file *file) int err = 0; /* If we are last writer on the inode, drop the block reservation. */ - if (sbi->options.prealloc && ((file->f_mode & FMODE_WRITE) && + if (sbi->options->prealloc && ((file->f_mode & FMODE_WRITE) && atomic_read(&inode->i_writecount) == 1)) { ni_lock(ni); down_write(&ni->file.run_lock); diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index db2a5a4c38e4..9f740fd301b2 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -49,8 +49,8 @@ static struct inode *ntfs_read_mft(struct inode *inode, inode->i_op = NULL; /* Setup 'uid' and 'gid' */ - inode->i_uid = sbi->options.fs_uid; - inode->i_gid = sbi->options.fs_gid; + inode->i_uid = sbi->options->fs_uid; + inode->i_gid = sbi->options->fs_gid; err = mi_init(&ni->mi, sbi, ino); if (err) @@ -229,7 +229,7 @@ next_attr: t32 = le16_to_cpu(attr->nres.run_off); } - mode = S_IFREG | (0777 & sbi->options.fs_fmask_inv); + mode = S_IFREG | (0777 & sbi->options->fs_fmask_inv); if (!attr->non_res) { ni->ni_flags |= NI_FLAG_RESIDENT; @@ -272,7 +272,7 @@ next_attr: goto out; mode = sb->s_root - ? (S_IFDIR | (0777 & sbi->options.fs_dmask_inv)) + ? (S_IFDIR | (0777 & sbi->options->fs_dmask_inv)) : (S_IFDIR | 0777); goto next_attr; @@ -443,7 +443,7 @@ end_enum: goto out; } - if ((sbi->options.sys_immutable && + if ((sbi->options->sys_immutable && (std5->fa & FILE_ATTRIBUTE_SYSTEM)) && !S_ISFIFO(mode) && !S_ISSOCK(mode) && !S_ISLNK(mode)) { inode->i_flags |= S_IMMUTABLE; @@ -1244,7 +1244,7 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, * } */ } else if (S_ISREG(mode)) { - if (sbi->options.sparse) { + if (sbi->options->sparse) { /* Sparsed regular file, cause option 'sparse'. */ fa = FILE_ATTRIBUTE_SPARSE_FILE | FILE_ATTRIBUTE_ARCHIVE; diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 97e682ebcfb9..98c90c399ee2 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -279,7 +279,7 @@ struct ntfs_sb_info { #endif } compress; - struct ntfs_mount_options options; + struct ntfs_mount_options *options; struct ratelimit_state msg_ratelimit; }; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 6cb689605089..0f3820342051 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -389,11 +389,11 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *data) return -ENOMEM; /* Store original options. */ - memcpy(&old_opts, &sbi->options, sizeof(old_opts)); - clear_mount_options(&sbi->options); - memset(&sbi->options, 0, sizeof(sbi->options)); + memcpy(&old_opts, sbi->options, sizeof(old_opts)); + clear_mount_options(sbi->options); + memset(sbi->options, 0, sizeof(old_opts)); - err = ntfs_parse_options(sb, data, 0, &sbi->options); + err = ntfs_parse_options(sb, data, 0, sbi->options); if (err) goto restore_opts; @@ -409,7 +409,7 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *data) sync_filesystem(sb); if (ro_rw && (sbi->volume.flags & VOLUME_FLAG_DIRTY) && - !sbi->options.force) { + !sbi->options->force) { ntfs_warn(sb, "volume is dirty and \"force\" flag is not set!"); err = -EINVAL; goto restore_opts; @@ -422,8 +422,8 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *data) goto out; restore_opts: - clear_mount_options(&sbi->options); - memcpy(&sbi->options, &old_opts, sizeof(old_opts)); + clear_mount_options(sbi->options); + memcpy(sbi->options, &old_opts, sizeof(old_opts)); out: kfree(orig_data); @@ -506,7 +506,8 @@ static noinline void put_ntfs(struct ntfs_sb_info *sbi) xpress_free_decompressor(sbi->compress.xpress); lzx_free_decompressor(sbi->compress.lzx); #endif - clear_mount_options(&sbi->options); + clear_mount_options(sbi->options); + kfree(sbi->options); kfree(sbi); } @@ -545,7 +546,7 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) { struct super_block *sb = root->d_sb; struct ntfs_sb_info *sbi = sb->s_fs_info; - struct ntfs_mount_options *opts = &sbi->options; + struct ntfs_mount_options *opts = sbi->options; struct user_namespace *user_ns = seq_user_ns(m); if (opts->uid) @@ -930,6 +931,12 @@ static int ntfs_fill_super(struct super_block *sb, void *data, int silent) if (!sbi) return -ENOMEM; + sbi->options = kzalloc(sizeof(struct ntfs_mount_options), GFP_NOFS); + if (!sbi->options) { + kfree(sbi); + return -ENOMEM; + } + sb->s_fs_info = sbi; sbi->sb = sb; sb->s_flags |= SB_NODIRATIME; @@ -942,7 +949,7 @@ static int ntfs_fill_super(struct super_block *sb, void *data, int silent) ratelimit_state_init(&sbi->msg_ratelimit, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST); - err = ntfs_parse_options(sb, data, silent, &sbi->options); + err = ntfs_parse_options(sb, data, silent, sbi->options); if (err) goto out; @@ -1074,7 +1081,7 @@ static int ntfs_fill_super(struct super_block *sb, void *data, int silent) goto out; } } else if (sbi->volume.flags & VOLUME_FLAG_DIRTY) { - if (!is_ro && !sbi->options.force) { + if (!is_ro && !sbi->options->force) { ntfs_warn( sb, "volume is dirty and \"force\" flag is not set!"); @@ -1394,7 +1401,7 @@ int ntfs_discard(struct ntfs_sb_info *sbi, CLST lcn, CLST len) if (sbi->flags & NTFS_FLAGS_NODISCARD) return -EOPNOTSUPP; - if (!sbi->options.discard) + if (!sbi->options->discard) return -EOPNOTSUPP; lbo = (u64)lcn << sbi->cluster_bits; diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index b15d532e4a17..ac4b37bf8832 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -769,7 +769,7 @@ int ntfs_acl_chmod(struct user_namespace *mnt_userns, struct inode *inode) int ntfs_permission(struct user_namespace *mnt_userns, struct inode *inode, int mask) { - if (ntfs_sb(inode->i_sb)->options.no_acs_rules) { + if (ntfs_sb(inode->i_sb)->options->no_acs_rules) { /* "No access rules" mode - Allow all changes. */ return 0; } -- cgit v1.2.3 From 610f8f5a7baf998e70a61c63e53869b676d9b04c Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:52 +0300 Subject: fs/ntfs3: Use new api for mounting We have now new mount api as described in Documentation/filesystems. We should use it as it gives us some benefits which are desribed here lore.kernel.org/linux-fsdevel/159646178122.1784947.11705396571718464082.stgit@warthog.procyon.org.uk/ Nls loading is changed a to load with string. This did make code also little cleaner. Also try to use fsparam_flag_no as much as possible. This is just nice little touch and is not mandatory but it should not make any harm. It is just convenient that we can use example acl/noacl mount options. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs_fs.h | 1 + fs/ntfs3/super.c | 433 ++++++++++++++++++++++++++++------------------------- 2 files changed, 229 insertions(+), 205 deletions(-) diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 98c90c399ee2..aa18f12b7096 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -52,6 +52,7 @@ // clang-format on struct ntfs_mount_options { + char *nls_name; struct nls_table *nls; kuid_t fs_uid; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 0f3820342051..befa78d3cb26 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -28,11 +28,12 @@ #include #include #include +#include +#include #include #include #include #include -#include #include #include @@ -205,9 +206,11 @@ void *ntfs_put_shared(void *ptr) return ret; } -static inline void clear_mount_options(struct ntfs_mount_options *options) +static inline void put_mount_options(struct ntfs_mount_options *options) { + kfree(options->nls_name); unload_nls(options->nls); + kfree(options); } enum Opt { @@ -229,205 +232,171 @@ enum Opt { Opt_err, }; -static const match_table_t ntfs_tokens = { - { Opt_uid, "uid=%u" }, - { Opt_gid, "gid=%u" }, - { Opt_umask, "umask=%o" }, - { Opt_dmask, "dmask=%o" }, - { Opt_fmask, "fmask=%o" }, - { Opt_immutable, "sys_immutable" }, - { Opt_discard, "discard" }, - { Opt_force, "force" }, - { Opt_sparse, "sparse" }, - { Opt_nohidden, "nohidden" }, - { Opt_acl, "acl" }, - { Opt_showmeta, "showmeta" }, - { Opt_nls, "nls=%s" }, - { Opt_prealloc, "prealloc" }, - { Opt_no_acs_rules, "no_acs_rules" }, - { Opt_err, NULL }, +static const struct fs_parameter_spec ntfs_fs_parameters[] = { + fsparam_u32("uid", Opt_uid), + fsparam_u32("gid", Opt_gid), + fsparam_u32oct("umask", Opt_umask), + fsparam_u32oct("dmask", Opt_dmask), + fsparam_u32oct("fmask", Opt_fmask), + fsparam_flag_no("sys_immutable", Opt_immutable), + fsparam_flag_no("discard", Opt_discard), + fsparam_flag_no("force", Opt_force), + fsparam_flag_no("sparse", Opt_sparse), + fsparam_flag("nohidden", Opt_nohidden), + fsparam_flag_no("acl", Opt_acl), + fsparam_flag_no("showmeta", Opt_showmeta), + fsparam_string("nls", Opt_nls), + fsparam_flag_no("prealloc", Opt_prealloc), + fsparam_flag("no_acs_rules", Opt_no_acs_rules), + {} }; -static noinline int ntfs_parse_options(struct super_block *sb, char *options, - int silent, - struct ntfs_mount_options *opts) +/* + * Load nls table or if @nls is utf8 then return NULL. + */ +static struct nls_table *ntfs_load_nls(char *nls) { - char *p; - substring_t args[MAX_OPT_ARGS]; - int option; - char nls_name[30]; - struct nls_table *nls; + struct nls_table *ret; - opts->fs_uid = current_uid(); - opts->fs_gid = current_gid(); - opts->fs_fmask_inv = opts->fs_dmask_inv = ~current_umask(); - nls_name[0] = 0; + if (!nls) + nls = CONFIG_NLS_DEFAULT; - if (!options) - goto out; + if (strcmp(nls, "utf8") == 0) + return NULL; - while ((p = strsep(&options, ","))) { - int token; + if (strcmp(nls, CONFIG_NLS_DEFAULT) == 0) + return load_nls_default(); - if (!*p) - continue; + ret = load_nls(nls); + if (ret) + return ret; - token = match_token(p, ntfs_tokens, args); - switch (token) { - case Opt_immutable: - opts->sys_immutable = 1; - break; - case Opt_uid: - if (match_int(&args[0], &option)) - return -EINVAL; - opts->fs_uid = make_kuid(current_user_ns(), option); - if (!uid_valid(opts->fs_uid)) - return -EINVAL; - opts->uid = 1; - break; - case Opt_gid: - if (match_int(&args[0], &option)) - return -EINVAL; - opts->fs_gid = make_kgid(current_user_ns(), option); - if (!gid_valid(opts->fs_gid)) - return -EINVAL; - opts->gid = 1; - break; - case Opt_umask: - if (match_octal(&args[0], &option)) - return -EINVAL; - opts->fs_fmask_inv = opts->fs_dmask_inv = ~option; - opts->fmask = opts->dmask = 1; - break; - case Opt_dmask: - if (match_octal(&args[0], &option)) - return -EINVAL; - opts->fs_dmask_inv = ~option; - opts->dmask = 1; - break; - case Opt_fmask: - if (match_octal(&args[0], &option)) - return -EINVAL; - opts->fs_fmask_inv = ~option; - opts->fmask = 1; - break; - case Opt_discard: - opts->discard = 1; - break; - case Opt_force: - opts->force = 1; - break; - case Opt_sparse: - opts->sparse = 1; - break; - case Opt_nohidden: - opts->nohidden = 1; - break; - case Opt_acl: + return ERR_PTR(-EINVAL); +} + +static int ntfs_fs_parse_param(struct fs_context *fc, + struct fs_parameter *param) +{ + struct ntfs_mount_options *opts = fc->fs_private; + struct fs_parse_result result; + int opt; + + opt = fs_parse(fc, ntfs_fs_parameters, param, &result); + if (opt < 0) + return opt; + + switch (opt) { + case Opt_uid: + opts->fs_uid = make_kuid(current_user_ns(), result.uint_32); + if (!uid_valid(opts->fs_uid)) + return invalf(fc, "ntfs3: Invalid value for uid."); + opts->uid = 1; + break; + case Opt_gid: + opts->fs_gid = make_kgid(current_user_ns(), result.uint_32); + if (!gid_valid(opts->fs_gid)) + return invalf(fc, "ntfs3: Invalid value for gid."); + opts->gid = 1; + break; + case Opt_umask: + if (result.uint_32 & ~07777) + return invalf(fc, "ntfs3: Invalid value for umask."); + opts->fs_fmask_inv = ~result.uint_32; + opts->fs_dmask_inv = ~result.uint_32; + opts->fmask = 1; + opts->dmask = 1; + break; + case Opt_dmask: + if (result.uint_32 & ~07777) + return invalf(fc, "ntfs3: Invalid value for dmask."); + opts->fs_dmask_inv = ~result.uint_32; + opts->dmask = 1; + break; + case Opt_fmask: + if (result.uint_32 & ~07777) + return invalf(fc, "ntfs3: Invalid value for fmask."); + opts->fs_fmask_inv = ~result.uint_32; + opts->fmask = 1; + break; + case Opt_immutable: + opts->sys_immutable = result.negated ? 0 : 1; + break; + case Opt_discard: + opts->discard = result.negated ? 0 : 1; + break; + case Opt_force: + opts->force = result.negated ? 0 : 1; + break; + case Opt_sparse: + opts->sparse = result.negated ? 0 : 1; + break; + case Opt_nohidden: + opts->nohidden = 1; + break; + case Opt_acl: + if (!result.negated) #ifdef CONFIG_NTFS3_FS_POSIX_ACL - sb->s_flags |= SB_POSIXACL; - break; + fc->sb_flags |= SB_POSIXACL; #else - ntfs_err(sb, "support for ACL not compiled in!"); - return -EINVAL; + return invalf(fc, "ntfs3: Support for ACL not compiled in!"); #endif - case Opt_showmeta: - opts->showmeta = 1; - break; - case Opt_nls: - match_strlcpy(nls_name, &args[0], sizeof(nls_name)); - break; - case Opt_prealloc: - opts->prealloc = 1; - break; - case Opt_no_acs_rules: - opts->no_acs_rules = 1; - break; - default: - if (!silent) - ntfs_err( - sb, - "Unrecognized mount option \"%s\" or missing value", - p); - //return -EINVAL; - } - } - -out: - if (!strcmp(nls_name[0] ? nls_name : CONFIG_NLS_DEFAULT, "utf8")) { - /* - * For UTF-8 use utf16s_to_utf8s()/utf8s_to_utf16s() - * instead of NLS. - */ - nls = NULL; - } else if (nls_name[0]) { - nls = load_nls(nls_name); - if (!nls) { - ntfs_err(sb, "failed to load \"%s\"", nls_name); - return -EINVAL; - } - } else { - nls = load_nls_default(); - if (!nls) { - ntfs_err(sb, "failed to load default nls"); - return -EINVAL; - } + else + fc->sb_flags &= ~SB_POSIXACL; + break; + case Opt_showmeta: + opts->showmeta = result.negated ? 0 : 1; + break; + case Opt_nls: + kfree(opts->nls_name); + opts->nls_name = param->string; + param->string = NULL; + break; + case Opt_prealloc: + opts->prealloc = result.negated ? 0 : 1; + break; + case Opt_no_acs_rules: + opts->no_acs_rules = 1; + break; + default: + /* Should not be here unless we forget add case. */ + return -EINVAL; } - opts->nls = nls; - return 0; } -static int ntfs_remount(struct super_block *sb, int *flags, char *data) +static int ntfs_fs_reconfigure(struct fs_context *fc) { - int err, ro_rw; + struct super_block *sb = fc->root->d_sb; struct ntfs_sb_info *sbi = sb->s_fs_info; - struct ntfs_mount_options old_opts; - char *orig_data = kstrdup(data, GFP_KERNEL); - - if (data && !orig_data) - return -ENOMEM; - - /* Store original options. */ - memcpy(&old_opts, sbi->options, sizeof(old_opts)); - clear_mount_options(sbi->options); - memset(sbi->options, 0, sizeof(old_opts)); - - err = ntfs_parse_options(sb, data, 0, sbi->options); - if (err) - goto restore_opts; + struct ntfs_mount_options *new_opts = fc->fs_private; + int ro_rw; - ro_rw = sb_rdonly(sb) && !(*flags & SB_RDONLY); + ro_rw = sb_rdonly(sb) && !(fc->sb_flags & SB_RDONLY); if (ro_rw && (sbi->flags & NTFS_FLAGS_NEED_REPLAY)) { - ntfs_warn( - sb, - "Couldn't remount rw because journal is not replayed. Please umount/remount instead\n"); - err = -EINVAL; - goto restore_opts; + errorf(fc, "ntfs3: Couldn't remount rw because journal is not replayed. Please umount/remount instead\n"); + return -EINVAL; + } + + new_opts->nls = ntfs_load_nls(new_opts->nls_name); + if (IS_ERR(new_opts->nls)) { + new_opts->nls = NULL; + errorf(fc, "ntfs3: Cannot load nls %s", new_opts->nls_name); + return -EINVAL; } + if (new_opts->nls != sbi->options->nls) + return invalf(fc, "ntfs3: Cannot use different nls when remounting!"); sync_filesystem(sb); if (ro_rw && (sbi->volume.flags & VOLUME_FLAG_DIRTY) && - !sbi->options->force) { - ntfs_warn(sb, "volume is dirty and \"force\" flag is not set!"); - err = -EINVAL; - goto restore_opts; + !new_opts->force) { + errorf(fc, "ntfs3: Volume is dirty and \"force\" flag is not set!"); + return -EINVAL; } - clear_mount_options(&old_opts); - - ntfs_info(sb, "re-mounted. Opts: %s", orig_data); - err = 0; - goto out; - -restore_opts: - clear_mount_options(sbi->options); - memcpy(sbi->options, &old_opts, sizeof(old_opts)); + memcpy(sbi->options, new_opts, sizeof(*new_opts)); -out: - kfree(orig_data); - return err; + return 0; } static struct kmem_cache *ntfs_inode_cachep; @@ -506,9 +475,6 @@ static noinline void put_ntfs(struct ntfs_sb_info *sbi) xpress_free_decompressor(sbi->compress.xpress); lzx_free_decompressor(sbi->compress.lzx); #endif - clear_mount_options(sbi->options); - kfree(sbi->options); - kfree(sbi); } @@ -519,7 +485,9 @@ static void ntfs_put_super(struct super_block *sb) /* Mark rw ntfs as clear, if possible. */ ntfs_set_state(sbi, NTFS_DIRTY_CLEAR); + put_mount_options(sbi->options); put_ntfs(sbi); + sb->s_fs_info = NULL; sync_blockdev(sb->s_bdev); } @@ -635,7 +603,6 @@ static const struct super_operations ntfs_sops = { .statfs = ntfs_statfs, .show_options = ntfs_show_options, .sync_fs = ntfs_sync_fs, - .remount_fs = ntfs_remount, .write_inode = ntfs3_write_inode, }; @@ -905,10 +872,10 @@ out: /* * ntfs_fill_super - Try to mount. */ -static int ntfs_fill_super(struct super_block *sb, void *data, int silent) +static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) { int err; - struct ntfs_sb_info *sbi; + struct ntfs_sb_info *sbi = sb->s_fs_info; struct block_device *bdev = sb->s_bdev; struct inode *bd_inode = bdev->bd_inode; struct request_queue *rq = bdev_get_queue(bdev); @@ -927,17 +894,6 @@ static int ntfs_fill_super(struct super_block *sb, void *data, int silent) ref.high = 0; - sbi = kzalloc(sizeof(struct ntfs_sb_info), GFP_NOFS); - if (!sbi) - return -ENOMEM; - - sbi->options = kzalloc(sizeof(struct ntfs_mount_options), GFP_NOFS); - if (!sbi->options) { - kfree(sbi); - return -ENOMEM; - } - - sb->s_fs_info = sbi; sbi->sb = sb; sb->s_flags |= SB_NODIRATIME; sb->s_magic = 0x7366746e; // "ntfs" @@ -949,9 +905,12 @@ static int ntfs_fill_super(struct super_block *sb, void *data, int silent) ratelimit_state_init(&sbi->msg_ratelimit, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST); - err = ntfs_parse_options(sb, data, silent, sbi->options); - if (err) - goto out; + sbi->options->nls = ntfs_load_nls(sbi->options->nls_name); + if (IS_ERR(sbi->options->nls)) { + sbi->options->nls = NULL; + errorf(fc, "Cannot load nls %s", sbi->options->nls_name); + return -EINVAL; + } if (!rq || !blk_queue_discard(rq) || !rq->limits.discard_granularity) { ; @@ -1344,6 +1303,9 @@ load_root: goto out; } + fc->fs_private = NULL; + fc->s_fs_info = NULL; + return 0; out: @@ -1354,9 +1316,6 @@ out: sb->s_root = NULL; } - put_ntfs(sbi); - - sb->s_fs_info = NULL; return err; } @@ -1426,19 +1385,83 @@ int ntfs_discard(struct ntfs_sb_info *sbi, CLST lcn, CLST len) return err; } -static struct dentry *ntfs_mount(struct file_system_type *fs_type, int flags, - const char *dev_name, void *data) +static int ntfs_fs_get_tree(struct fs_context *fc) +{ + return get_tree_bdev(fc, ntfs_fill_super); +} + +/* + * ntfs_fs_free - Free fs_context. + * + * Note that this will be called after fill_super and reconfigure + * even when they pass. So they have to take pointers if they pass. + */ +static void ntfs_fs_free(struct fs_context *fc) +{ + struct ntfs_mount_options *opts = fc->fs_private; + struct ntfs_sb_info *sbi = fc->s_fs_info; + + if (sbi) + put_ntfs(sbi); + + if (opts) + put_mount_options(opts); +} + +static const struct fs_context_operations ntfs_context_ops = { + .parse_param = ntfs_fs_parse_param, + .get_tree = ntfs_fs_get_tree, + .reconfigure = ntfs_fs_reconfigure, + .free = ntfs_fs_free, +}; + +/* + * ntfs_init_fs_context - Initialize spi and opts + * + * This will called when mount/remount. We will first initiliaze + * options so that if remount we can use just that. + */ +static int ntfs_init_fs_context(struct fs_context *fc) { - return mount_bdev(fs_type, flags, dev_name, data, ntfs_fill_super); + struct ntfs_mount_options *opts; + struct ntfs_sb_info *sbi; + + opts = kzalloc(sizeof(struct ntfs_mount_options), GFP_NOFS); + if (!opts) + return -ENOMEM; + + /* Default options. */ + opts->fs_uid = current_uid(); + opts->fs_gid = current_gid(); + opts->fs_fmask_inv = ~current_umask(); + opts->fs_dmask_inv = ~current_umask(); + + if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) + goto ok; + + sbi = kzalloc(sizeof(struct ntfs_sb_info), GFP_NOFS); + if (!sbi) { + kfree(opts); + return -ENOMEM; + } + + sbi->options = opts; + fc->s_fs_info = sbi; +ok: + fc->fs_private = opts; + fc->ops = &ntfs_context_ops; + + return 0; } // clang-format off static struct file_system_type ntfs_fs_type = { - .owner = THIS_MODULE, - .name = "ntfs3", - .mount = ntfs_mount, - .kill_sb = kill_block_super, - .fs_flags = FS_REQUIRES_DEV | FS_ALLOW_IDMAP, + .owner = THIS_MODULE, + .name = "ntfs3", + .init_fs_context = ntfs_init_fs_context, + .parameters = ntfs_fs_parameters, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV | FS_ALLOW_IDMAP, }; // clang-format on -- cgit v1.2.3 From 27fac77707a1d99deef33fd5f3f5f2ed96bfbf6a Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:53 +0300 Subject: fs/ntfs3: Init spi more in init_fs_context than fill_super init_fs_context() is meant to initialize s_fs_info (spi). Move spi initializing code there which we can initialize before fill_super(). Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index befa78d3cb26..420cd1409170 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -887,7 +887,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) const struct VOLUME_INFO *info; u32 idx, done, bytes; struct ATTR_DEF_ENTRY *t; - u16 *upcase = NULL; + u16 *upcase; u16 *shared; bool is_ro; struct MFT_REF ref; @@ -902,9 +902,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) sb->s_time_gran = NTFS_TIME_GRAN; // 100 nsec sb->s_xattr = ntfs_xattr_handlers; - ratelimit_state_init(&sbi->msg_ratelimit, DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - sbi->options->nls = ntfs_load_nls(sbi->options->nls_name); if (IS_ERR(sbi->options->nls)) { sbi->options->nls = NULL; @@ -934,12 +931,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) sb->s_maxbytes = 0xFFFFFFFFull << sbi->cluster_bits; #endif - mutex_init(&sbi->compress.mtx_lznt); -#ifdef CONFIG_NTFS3_LZX_XPRESS - mutex_init(&sbi->compress.mtx_xpress); - mutex_init(&sbi->compress.mtx_lzx); -#endif - /* * Load $Volume. This should be done before $LogFile * 'cause 'sbi->volume.ni' is used 'ntfs_set_state'. @@ -1224,11 +1215,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) goto out; } - sbi->upcase = upcase = kvmalloc(0x10000 * sizeof(short), GFP_KERNEL); - if (!upcase) { - err = -ENOMEM; - goto out; - } + upcase = sbi->upcase; for (idx = 0; idx < (0x10000 * sizeof(short) >> PAGE_SHIFT); idx++) { const __le16 *src; @@ -1440,10 +1427,21 @@ static int ntfs_init_fs_context(struct fs_context *fc) goto ok; sbi = kzalloc(sizeof(struct ntfs_sb_info), GFP_NOFS); - if (!sbi) { - kfree(opts); - return -ENOMEM; - } + if (!sbi) + goto free_opts; + + sbi->upcase = kvmalloc(0x10000 * sizeof(short), GFP_KERNEL); + if (!sbi->upcase) + goto free_sbi; + + ratelimit_state_init(&sbi->msg_ratelimit, DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); + + mutex_init(&sbi->compress.mtx_lznt); +#ifdef CONFIG_NTFS3_LZX_XPRESS + mutex_init(&sbi->compress.mtx_xpress); + mutex_init(&sbi->compress.mtx_lzx); +#endif sbi->options = opts; fc->s_fs_info = sbi; @@ -1452,6 +1450,11 @@ ok: fc->ops = &ntfs_context_ops; return 0; +free_opts: + kfree(opts); +free_sbi: + kfree(sbi); + return -ENOMEM; } // clang-format off -- cgit v1.2.3 From 9d1939f4575f3fda70dd94542dbd4d775e104132 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:54 +0300 Subject: fs/ntfs3: Make mount option nohidden more universal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we call Opt_nohidden with just keyword hidden, then we can use hidden/nohidden when mounting. We already use this method for almoust all other parameters so it is just logical that this will use same method. Acked-by: Christian Brauner Reviewed-by: Christoph Hellwig Reviewed-by: Pali Rohár Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 420cd1409170..729ead6f2fac 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -242,7 +242,7 @@ static const struct fs_parameter_spec ntfs_fs_parameters[] = { fsparam_flag_no("discard", Opt_discard), fsparam_flag_no("force", Opt_force), fsparam_flag_no("sparse", Opt_sparse), - fsparam_flag("nohidden", Opt_nohidden), + fsparam_flag_no("hidden", Opt_nohidden), fsparam_flag_no("acl", Opt_acl), fsparam_flag_no("showmeta", Opt_showmeta), fsparam_string("nls", Opt_nls), @@ -331,7 +331,7 @@ static int ntfs_fs_parse_param(struct fs_context *fc, opts->sparse = result.negated ? 0 : 1; break; case Opt_nohidden: - opts->nohidden = 1; + opts->nohidden = result.negated ? 1 : 0; break; case Opt_acl: if (!result.negated) -- cgit v1.2.3 From e274cde8c7550cac46eb7aba3a77aff44ae0b301 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:55 +0300 Subject: fs/ntfs3: Add iocharset= mount option as alias for nls= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Other fs drivers are using iocharset= mount option for specifying charset. So add it also for ntfs3 and mark old nls= mount option as deprecated. Reviewed-by: Pali Rohár Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- Documentation/filesystems/ntfs3.rst | 4 ++-- fs/ntfs3/super.c | 18 +++++++++++------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst index af7158de6fde..ded706474825 100644 --- a/Documentation/filesystems/ntfs3.rst +++ b/Documentation/filesystems/ntfs3.rst @@ -32,12 +32,12 @@ generic ones. =============================================================================== -nls=name This option informs the driver how to interpret path +iocharset=name This option informs the driver how to interpret path strings and translate them to Unicode and back. If this option is not set, the default codepage will be used (CONFIG_NLS_DEFAULT). Examples: - 'nls=utf8' + 'iocharset=utf8' uid= gid= diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 729ead6f2fac..503e2e23f711 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -226,7 +226,7 @@ enum Opt { Opt_nohidden, Opt_showmeta, Opt_acl, - Opt_nls, + Opt_iocharset, Opt_prealloc, Opt_no_acs_rules, Opt_err, @@ -245,9 +245,13 @@ static const struct fs_parameter_spec ntfs_fs_parameters[] = { fsparam_flag_no("hidden", Opt_nohidden), fsparam_flag_no("acl", Opt_acl), fsparam_flag_no("showmeta", Opt_showmeta), - fsparam_string("nls", Opt_nls), fsparam_flag_no("prealloc", Opt_prealloc), fsparam_flag("no_acs_rules", Opt_no_acs_rules), + fsparam_string("iocharset", Opt_iocharset), + + __fsparam(fs_param_is_string, + "nls", Opt_iocharset, + fs_param_deprecated, NULL), {} }; @@ -346,7 +350,7 @@ static int ntfs_fs_parse_param(struct fs_context *fc, case Opt_showmeta: opts->showmeta = result.negated ? 0 : 1; break; - case Opt_nls: + case Opt_iocharset: kfree(opts->nls_name); opts->nls_name = param->string; param->string = NULL; @@ -380,11 +384,11 @@ static int ntfs_fs_reconfigure(struct fs_context *fc) new_opts->nls = ntfs_load_nls(new_opts->nls_name); if (IS_ERR(new_opts->nls)) { new_opts->nls = NULL; - errorf(fc, "ntfs3: Cannot load nls %s", new_opts->nls_name); + errorf(fc, "ntfs3: Cannot load iocharset %s", new_opts->nls_name); return -EINVAL; } if (new_opts->nls != sbi->options->nls) - return invalf(fc, "ntfs3: Cannot use different nls when remounting!"); + return invalf(fc, "ntfs3: Cannot use different iocharset when remounting!"); sync_filesystem(sb); @@ -528,9 +532,9 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) if (opts->dmask) seq_printf(m, ",dmask=%04o", ~opts->fs_dmask_inv); if (opts->nls) - seq_printf(m, ",nls=%s", opts->nls->charset); + seq_printf(m, ",iocharset=%s", opts->nls->charset); else - seq_puts(m, ",nls=utf8"); + seq_puts(m, ",iocharset=utf8"); if (opts->sys_immutable) seq_puts(m, ",sys_immutable"); if (opts->discard) -- cgit v1.2.3 From 28a941ffc1404b66d67228cbe8392bbadb94af0d Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:56 +0300 Subject: fs/ntfs3: Rename mount option no_acs_rules > (no)acsrules Rename mount option no_acs_rules to (no)acsrules. This allow us to use possibility to mount with options noaclrules or aclrules. Acked-by: Christian Brauner Reviewed-by: Christoph Hellwig Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- Documentation/filesystems/ntfs3.rst | 2 +- fs/ntfs3/file.c | 2 +- fs/ntfs3/ntfs_fs.h | 2 +- fs/ntfs3/super.c | 12 ++++++------ fs/ntfs3/xattr.c | 2 +- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst index ded706474825..7b6afe452197 100644 --- a/Documentation/filesystems/ntfs3.rst +++ b/Documentation/filesystems/ntfs3.rst @@ -73,7 +73,7 @@ prealloc Preallocate space for files excessively when file size is increasing on writes. Decreases fragmentation in case of parallel write operations to different files. -no_acs_rules "No access rules" mount option sets access rights for +noacsrules "No access rules" mount option sets access rights for files/folders to 777 and owner/group to root. This mount option absorbs all other permissions: - permissions change for files/folders will be reported diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index fef57141b161..0743d806c567 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -737,7 +737,7 @@ int ntfs3_setattr(struct user_namespace *mnt_userns, struct dentry *dentry, umode_t mode = inode->i_mode; int err; - if (sbi->options->no_acs_rules) { + if (sbi->options->noacsrules) { /* "No access rules" - Force any changes of time etc. */ attr->ia_valid |= ATTR_FORCE; /* and disable for editing some attributes. */ diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index aa18f12b7096..15bab48bc1ad 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -70,7 +70,7 @@ struct ntfs_mount_options { showmeta : 1, /* Show meta files. */ nohidden : 1, /* Do not show hidden files. */ force : 1, /* Rw mount dirty volume. */ - no_acs_rules : 1, /*Exclude acs rules. */ + noacsrules : 1, /*Exclude acs rules. */ prealloc : 1 /* Preallocate space when file is growing. */ ; }; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 503e2e23f711..0690e7e4f00d 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -228,7 +228,7 @@ enum Opt { Opt_acl, Opt_iocharset, Opt_prealloc, - Opt_no_acs_rules, + Opt_noacsrules, Opt_err, }; @@ -246,7 +246,7 @@ static const struct fs_parameter_spec ntfs_fs_parameters[] = { fsparam_flag_no("acl", Opt_acl), fsparam_flag_no("showmeta", Opt_showmeta), fsparam_flag_no("prealloc", Opt_prealloc), - fsparam_flag("no_acs_rules", Opt_no_acs_rules), + fsparam_flag_no("acsrules", Opt_noacsrules), fsparam_string("iocharset", Opt_iocharset), __fsparam(fs_param_is_string, @@ -358,8 +358,8 @@ static int ntfs_fs_parse_param(struct fs_context *fc, case Opt_prealloc: opts->prealloc = result.negated ? 0 : 1; break; - case Opt_no_acs_rules: - opts->no_acs_rules = 1; + case Opt_noacsrules: + opts->noacsrules = result.negated ? 1 : 0; break; default: /* Should not be here unless we forget add case. */ @@ -547,8 +547,8 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) seq_puts(m, ",nohidden"); if (opts->force) seq_puts(m, ",force"); - if (opts->no_acs_rules) - seq_puts(m, ",no_acs_rules"); + if (opts->noacsrules) + seq_puts(m, ",noacsrules"); if (opts->prealloc) seq_puts(m, ",prealloc"); if (sb->s_flags & SB_POSIXACL) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index ac4b37bf8832..6f88cb77a17f 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -769,7 +769,7 @@ int ntfs_acl_chmod(struct user_namespace *mnt_userns, struct inode *inode) int ntfs_permission(struct user_namespace *mnt_userns, struct inode *inode, int mask) { - if (ntfs_sb(inode->i_sb)->options->no_acs_rules) { + if (ntfs_sb(inode->i_sb)->options->noacsrules) { /* "No access rules" mode - Allow all changes. */ return 0; } -- cgit v1.2.3 From 15b2ae776044ac52cddda8a3e6c9fecd15226b8c Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 18:35:57 +0300 Subject: fs/ntfs3: Show uid/gid always in show_options() Show options should show option according documentation when some value is not default or when ever coder wants. Uid/gid are problematic because it is hard to know which are defaults. In file system there is many different implementation for this problem. Some file systems show uid/gid when they are different than root, some when user has set them and some show them always. There is also problem that what if root uid/gid change. This code just choose to show them always. This way we do not need to think this any more. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs_fs.h | 23 ++++++++++------------- fs/ntfs3/super.c | 12 ++++-------- 2 files changed, 14 insertions(+), 21 deletions(-) diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 15bab48bc1ad..372cda697dd4 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -60,19 +60,16 @@ struct ntfs_mount_options { u16 fs_fmask_inv; u16 fs_dmask_inv; - unsigned uid : 1, /* uid was set. */ - gid : 1, /* gid was set. */ - fmask : 1, /* fmask was set. */ - dmask : 1, /* dmask was set. */ - sys_immutable : 1, /* Immutable system files. */ - discard : 1, /* Issue discard requests on deletions. */ - sparse : 1, /* Create sparse files. */ - showmeta : 1, /* Show meta files. */ - nohidden : 1, /* Do not show hidden files. */ - force : 1, /* Rw mount dirty volume. */ - noacsrules : 1, /*Exclude acs rules. */ - prealloc : 1 /* Preallocate space when file is growing. */ - ; + unsigned fmask : 1; /* fmask was set. */ + unsigned dmask : 1; /*dmask was set. */ + unsigned sys_immutable : 1; /* Immutable system files. */ + unsigned discard : 1; /* Issue discard requests on deletions. */ + unsigned sparse : 1; /* Create sparse files. */ + unsigned showmeta : 1; /* Show meta files. */ + unsigned nohidden : 1; /* Do not show hidden files. */ + unsigned force : 1; /* RW mount dirty volume. */ + unsigned noacsrules : 1; /* Exclude acs rules. */ + unsigned prealloc : 1; /* Preallocate space when file is growing. */ }; /* Special value to unpack and deallocate. */ diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 0690e7e4f00d..3cba0b5e7ac7 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -294,13 +294,11 @@ static int ntfs_fs_parse_param(struct fs_context *fc, opts->fs_uid = make_kuid(current_user_ns(), result.uint_32); if (!uid_valid(opts->fs_uid)) return invalf(fc, "ntfs3: Invalid value for uid."); - opts->uid = 1; break; case Opt_gid: opts->fs_gid = make_kgid(current_user_ns(), result.uint_32); if (!gid_valid(opts->fs_gid)) return invalf(fc, "ntfs3: Invalid value for gid."); - opts->gid = 1; break; case Opt_umask: if (result.uint_32 & ~07777) @@ -521,12 +519,10 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) struct ntfs_mount_options *opts = sbi->options; struct user_namespace *user_ns = seq_user_ns(m); - if (opts->uid) - seq_printf(m, ",uid=%u", - from_kuid_munged(user_ns, opts->fs_uid)); - if (opts->gid) - seq_printf(m, ",gid=%u", - from_kgid_munged(user_ns, opts->fs_gid)); + seq_printf(m, ",uid=%u", + from_kuid_munged(user_ns, opts->fs_uid)); + seq_printf(m, ",gid=%u", + from_kgid_munged(user_ns, opts->fs_gid)); if (opts->fmask) seq_printf(m, ",fmask=%04o", ~opts->fs_fmask_inv); if (opts->dmask) -- cgit v1.2.3 From 9c3ad33b5a412d8bc0a377e7cd9baa53ed52f22d Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:02 +0800 Subject: ASoC: fsl_sai: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 435508214942 ("ASoC: Add SAI SoC Digital Audio Interface driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_sai.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 223fcd15bfcc..38f6362099d5 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -1152,11 +1152,10 @@ static int fsl_sai_probe(struct platform_device *pdev) if (ret < 0) goto err_pm_get_sync; - ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, - &sai->cpu_dai_drv, 1); - if (ret) - goto err_pm_get_sync; - + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ if (sai->soc_data->use_imx_pcm) { ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE); if (ret) @@ -1167,6 +1166,11 @@ static int fsl_sai_probe(struct platform_device *pdev) goto err_pm_get_sync; } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, + &sai->cpu_dai_drv, 1); + if (ret) + goto err_pm_get_sync; + return ret; err_pm_get_sync: -- cgit v1.2.3 From f12ce92e98b21c1fc669cd74e12c54a0fe3bc2eb Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:03 +0800 Subject: ASoC: fsl_esai: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_esai.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index a961f837cd09..bda66b30e063 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -1073,6 +1073,16 @@ static int fsl_esai_probe(struct platform_device *pdev) if (ret < 0) goto err_pm_get_sync; + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE); + if (ret) { + dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); + goto err_pm_get_sync; + } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component, &fsl_esai_dai, 1); if (ret) { @@ -1082,12 +1092,6 @@ static int fsl_esai_probe(struct platform_device *pdev) INIT_WORK(&esai_priv->work, fsl_esai_hw_reset); - ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE); - if (ret) { - dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); - goto err_pm_get_sync; - } - return ret; err_pm_get_sync: -- cgit v1.2.3 From 0adf292069dcca8bab76a603251fcaabf77468ca Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:04 +0800 Subject: ASoC: fsl_micfil: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_micfil.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 8c0c75ce9490..9f90989ac59a 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -737,18 +737,23 @@ static int fsl_micfil_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); regcache_cache_only(micfil->regmap, true); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + if (ret) { + dev_err(&pdev->dev, "failed to pcm register\n"); + return ret; + } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component, &fsl_micfil_dai, 1); if (ret) { dev_err(&pdev->dev, "failed to register component %s\n", fsl_micfil_component.name); - return ret; } - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret) - dev_err(&pdev->dev, "failed to pcm register\n"); - return ret; } -- cgit v1.2.3 From ee8ccc2eb5840e34fce088bdb174fd5329153ef0 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:05 +0800 Subject: ASoC: fsl_spdif: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-5-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_spdif.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 8ffb1a6048d6..1c53719bb61e 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1434,16 +1434,20 @@ static int fsl_spdif_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); regcache_cache_only(spdif_priv->regmap, true); - ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component, - &spdif_priv->cpu_dai_drv, 1); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = imx_pcm_dma_init(pdev, IMX_SPDIF_DMABUF_SIZE); if (ret) { - dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + dev_err_probe(&pdev->dev, ret, "imx_pcm_dma_init failed\n"); goto err_pm_disable; } - ret = imx_pcm_dma_init(pdev, IMX_SPDIF_DMABUF_SIZE); + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component, + &spdif_priv->cpu_dai_drv, 1); if (ret) { - dev_err_probe(&pdev->dev, ret, "imx_pcm_dma_init failed\n"); + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); goto err_pm_disable; } -- cgit v1.2.3 From c590fa80b39287a91abeb487829f3190e7ae775f Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:06 +0800 Subject: ASoC: fsl_xcvr: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-6-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 31c5ee641fe7..7ba2fd15132d 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -1215,18 +1215,23 @@ static int fsl_xcvr_probe(struct platform_device *pdev) pm_runtime_enable(dev); regcache_cache_only(xcvr->regmap, true); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); + if (ret) { + dev_err(dev, "failed to pcm register\n"); + return ret; + } + ret = devm_snd_soc_register_component(dev, &fsl_xcvr_comp, &fsl_xcvr_dai, 1); if (ret) { dev_err(dev, "failed to register component %s\n", fsl_xcvr_comp.name); - return ret; } - ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); - if (ret) - dev_err(dev, "failed to pcm register\n"); - return ret; } -- cgit v1.2.3 From 1dd038522615b70f5f8945c5631e9e2fa5bd58b1 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Fri, 10 Sep 2021 17:26:13 +0800 Subject: ASoC: mediatek: common: handle NULL case in suspend/resume function When memory allocation for afe->reg_back_up fails, reg_back_up can't be used. Keep the suspend/resume flow but skip register backup when afe->reg_back_up is NULL, in case illegal memory access happens. Fixes: 283b612429a2 ("ASoC: mediatek: implement mediatek common structure") Signed-off-by: Trevor Wu Reported-by: Dan Carpenter Link: https://lore.kernel.org/r/20210910092613.30188-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/common/mtk-afe-fe-dai.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/sound/soc/mediatek/common/mtk-afe-fe-dai.c b/sound/soc/mediatek/common/mtk-afe-fe-dai.c index baaa5881b1d4..e95c7c018e7d 100644 --- a/sound/soc/mediatek/common/mtk-afe-fe-dai.c +++ b/sound/soc/mediatek/common/mtk-afe-fe-dai.c @@ -334,9 +334,11 @@ int mtk_afe_suspend(struct snd_soc_component *component) devm_kcalloc(dev, afe->reg_back_up_list_num, sizeof(unsigned int), GFP_KERNEL); - for (i = 0; i < afe->reg_back_up_list_num; i++) - regmap_read(regmap, afe->reg_back_up_list[i], - &afe->reg_back_up[i]); + if (afe->reg_back_up) { + for (i = 0; i < afe->reg_back_up_list_num; i++) + regmap_read(regmap, afe->reg_back_up_list[i], + &afe->reg_back_up[i]); + } afe->suspended = true; afe->runtime_suspend(dev); @@ -356,12 +358,13 @@ int mtk_afe_resume(struct snd_soc_component *component) afe->runtime_resume(dev); - if (!afe->reg_back_up) + if (!afe->reg_back_up) { dev_dbg(dev, "%s no reg_backup\n", __func__); - - for (i = 0; i < afe->reg_back_up_list_num; i++) - mtk_regmap_write(regmap, afe->reg_back_up_list[i], - afe->reg_back_up[i]); + } else { + for (i = 0; i < afe->reg_back_up_list_num; i++) + mtk_regmap_write(regmap, afe->reg_back_up_list[i], + afe->reg_back_up[i]); + } afe->suspended = false; return 0; -- cgit v1.2.3 From 345e1ae0c6ba54f6a4d32154e80cadc2ee2ef1af Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Aug 2021 23:22:02 +0100 Subject: afs: Fix missing put on afs_read objects and missing get on the key therein The afs_read objects created by afs_req_issue_op() get leaked because afs_alloc_read() returns a ref and then afs_fetch_data() gets its own ref which is released when the operation completes, but the initial ref is never released. Fix this by discarding the initial ref at the end of afs_req_issue_op(). This leak also covered another bug whereby a ref isn't got on the key attached to the read record by afs_req_issue_op(). This isn't a problem as long as the afs_read req never goes away... Fix this by calling key_get() in afs_req_issue_op(). This was found by the generic/074 test. It leaks a bunch of kmalloc-192 objects each time it is run, which can be observed by watching /proc/slabinfo. Fixes: f7605fa869cf ("afs: Fix leak of afs_read objects") Reported-by: Marc Dionne Signed-off-by: David Howells Reviewed-and-tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163010394740.3035676.8516846193899793357.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163111665914.283156.3038561975681836591.stgit@warthog.procyon.org.uk/ --- fs/afs/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/afs/file.c b/fs/afs/file.c index db035ae2a134..6688fff14b0b 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -295,7 +295,7 @@ static void afs_req_issue_op(struct netfs_read_subrequest *subreq) fsreq->subreq = subreq; fsreq->pos = subreq->start + subreq->transferred; fsreq->len = subreq->len - subreq->transferred; - fsreq->key = subreq->rreq->netfs_priv; + fsreq->key = key_get(subreq->rreq->netfs_priv); fsreq->vnode = vnode; fsreq->iter = &fsreq->def_iter; @@ -304,6 +304,7 @@ static void afs_req_issue_op(struct netfs_read_subrequest *subreq) fsreq->pos, fsreq->len); afs_fetch_data(fsreq->vnode, fsreq); + afs_put_read(fsreq); } static int afs_symlink_readpage(struct page *page) -- cgit v1.2.3 From 581b2027af0018944ba301d68e7af45c6d1128b5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 09:15:21 +0100 Subject: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top". Fixes: e87b03f5830e ("afs: Prepare for use of THPs") Reported-by: Marc Dionne Signed-off-by: David Howells Reviewed-and-tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111666635.283156.177701903478910460.stgit@warthog.procyon.org.uk/ --- fs/afs/write.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/afs/write.c b/fs/afs/write.c index c0534697268e..66b235266893 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -471,13 +471,18 @@ static void afs_extend_writeback(struct address_space *mapping, } /* Has the page moved or been split? */ - if (unlikely(page != xas_reload(&xas))) + if (unlikely(page != xas_reload(&xas))) { + put_page(page); break; + } - if (!trylock_page(page)) + if (!trylock_page(page)) { + put_page(page); break; + } if (!PageDirty(page) || PageWriteback(page)) { unlock_page(page); + put_page(page); break; } @@ -487,6 +492,7 @@ static void afs_extend_writeback(struct address_space *mapping, t = afs_page_dirty_to(page, priv); if (f != 0 && !new_content) { unlock_page(page); + put_page(page); break; } -- cgit v1.2.3 From 23c69b90365c8280b627aa969393d828ff47ac14 Mon Sep 17 00:00:00 2001 From: suma hegde Date: Thu, 2 Sep 2021 23:11:54 +0530 Subject: hwmon: (k10temp) Remove residues of current and voltage Commit id "b00647c46c9d7f6ee1ff6aaf335906101755e614", adds reporting current and voltage to k10temp.c The commit id "0a4e668b5d52eed8026f5d717196b02b55fb2dc6", removed reporting current and voltage from k10temp.c The curr and in(voltage) entries are not removed from "k10temp_info" structure. Removing those residue entries. while at it, update k10temp driver documentation Signed-off-by: suma hegde Cc: Guenter Roeck Link: https://lore.kernel.org/r/20210902174155.7365-2-nchatrad@amd.com Signed-off-by: Guenter Roeck --- Documentation/hwmon/k10temp.rst | 17 ----------------- drivers/hwmon/k10temp.c | 6 ------ 2 files changed, 23 deletions(-) diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst index 8557e26281c3..91b99adc6c48 100644 --- a/Documentation/hwmon/k10temp.rst +++ b/Documentation/hwmon/k10temp.rst @@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU variant. - -Various Family 17h and 18h CPUs report voltage and current telemetry -information. The following attributes may be reported. - -Attribute Label Description -=============== ======= ================ -in0_input Vcore Core voltage -in1_input Vsoc SoC voltage -curr1_input Icore Core current -curr2_input Isoc SoC current -=============== ======= ================ - -Current values are raw (unscaled) as reported by the CPU. Core current is -reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A -/ LSB. The real current is board specific. Reported currents should be seen -as rough guidance, and should be scaled using sensors3.conf as appropriate -for a given board. diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 38bc35ac8135..3618a924e78e 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -362,12 +362,6 @@ static const struct hwmon_channel_info *k10temp_info[] = { HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL), - HWMON_CHANNEL_INFO(in, - HWMON_I_INPUT | HWMON_I_LABEL, - HWMON_I_INPUT | HWMON_I_LABEL), - HWMON_CHANNEL_INFO(curr, - HWMON_C_INPUT | HWMON_C_LABEL, - HWMON_C_INPUT | HWMON_C_LABEL), NULL }; -- cgit v1.2.3 From 64794d6db49730d22f440aef0cf4da98a56a4ea3 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 13 Sep 2021 11:10:42 +0900 Subject: ALSA: oxfw: fix transmission method for Loud models based on OXFW971 Loud Technologies Mackie Onyx 1640i (former model) is identified as the model which uses OXFW971. The analysis of packet dump shows that it transfers events in blocking method of IEC 61883-6, however the default behaviour of ALSA oxfw driver is for non-blocking method. This commit adds code to detect it assuming that all of loud models based on OXFW971 have such quirk. It brings no functional change except for alignment rule of PCM buffer. Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210913021042.10085-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/oxfw/oxfw.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index cb5b5e3a481b..daf731364695 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -184,13 +184,16 @@ static int detect_quirks(struct snd_oxfw *oxfw, const struct ieee1394_device_id model = val; } - /* - * Mackie Onyx Satellite with base station has a quirk to report a wrong - * value in 'dbs' field of CIP header against its format information. - */ - if (vendor == VENDOR_LOUD && model == MODEL_SATELLITE) + if (vendor == VENDOR_LOUD) { + // Mackie Onyx Satellite with base station has a quirk to report a wrong + // value in 'dbs' field of CIP header against its format information. oxfw->quirks |= SND_OXFW_QUIRK_WRONG_DBS; + // OXFW971-based models may transfer events by blocking method. + if (!(oxfw->quirks & SND_OXFW_QUIRK_JUMBO_PAYLOAD)) + oxfw->quirks |= SND_OXFW_QUIRK_BLOCKING_TRANSMISSION; + } + return 0; } -- cgit v1.2.3 From 3978d816523991dd86cf9aae88c295230a5ea3b2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 19:22:50 +0100 Subject: afs: Add missing vnode validation checks afs_d_revalidate() should only be validating the directory entry it is given and the directory to which that belongs; it shouldn't be validating the inode/vnode to which that dentry points. Besides, validation need to be done even if we don't call afs_d_revalidate() - which might be the case if we're starting from a file descriptor. In order for afs_d_revalidate() to be fixed, validation points must be added in some other places. Certain directory operations, such as afs_unlink(), already check this, but not all and not all file operations either. Note that the validation of a vnode not only checks to see if the attributes we have are correct, but also gets a promise from the server to notify us if that file gets changed by a third party. Add the following checks: - Check the vnode we're going to make a hard link to. - Check the vnode we're going to move/rename. - Check the vnode we're going to read from. - Check the vnode we're going to write to. - Check the vnode we're going to sync. - Check the vnode we're going to make a mapped page writable for. Some of these aren't strictly necessary as we're going to perform a server operation that might get the attributes anyway from which we can determine if something changed - though it might not get us a callback promise. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@warthog.procyon.org.uk/ --- fs/afs/dir.c | 11 +++++++++++ fs/afs/file.c | 16 +++++++++++++++- fs/afs/write.c | 17 +++++++++++++++-- 3 files changed, 41 insertions(+), 3 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index ac829e63c570..a8e3ae55f1f9 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1792,6 +1792,10 @@ static int afs_link(struct dentry *from, struct inode *dir, goto error; } + ret = afs_validate(vnode, op->key); + if (ret < 0) + goto error_op; + afs_op_set_vnode(op, 0, dvnode); afs_op_set_vnode(op, 1, vnode); op->file[0].dv_delta = 1; @@ -1805,6 +1809,8 @@ static int afs_link(struct dentry *from, struct inode *dir, op->create.reason = afs_edit_dir_for_link; return afs_do_sync_operation(op); +error_op: + afs_put_operation(op); error: d_drop(dentry); _leave(" = %d", ret); @@ -1989,6 +1995,11 @@ static int afs_rename(struct user_namespace *mnt_userns, struct inode *old_dir, if (IS_ERR(op)) return PTR_ERR(op); + ret = afs_validate(vnode, op->key); + op->error = ret; + if (ret < 0) + goto error; + afs_op_set_vnode(op, 0, orig_dvnode); afs_op_set_vnode(op, 1, new_dvnode); /* May be same as orig_dvnode */ op->file[0].dv_delta = 1; diff --git a/fs/afs/file.c b/fs/afs/file.c index 6688fff14b0b..4c8d786b53e0 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -24,12 +24,13 @@ static void afs_invalidatepage(struct page *page, unsigned int offset, static int afs_releasepage(struct page *page, gfp_t gfp_flags); static void afs_readahead(struct readahead_control *ractl); +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter); const struct file_operations afs_file_operations = { .open = afs_open, .release = afs_release, .llseek = generic_file_llseek, - .read_iter = generic_file_read_iter, + .read_iter = afs_file_read_iter, .write_iter = afs_file_write, .mmap = afs_file_mmap, .splice_read = generic_file_splice_read, @@ -503,3 +504,16 @@ static int afs_file_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_ops = &afs_vm_ops; return ret; } + +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) +{ + struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; + int ret; + + ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + + return generic_file_read_iter(iocb, iter); +} diff --git a/fs/afs/write.c b/fs/afs/write.c index 66b235266893..32a764c24284 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -807,6 +807,7 @@ int afs_writepages(struct address_space *mapping, ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) { struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; ssize_t result; size_t count = iov_iter_count(from); @@ -822,6 +823,10 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) if (!count) return 0; + result = afs_validate(vnode, af->key); + if (result < 0) + return result; + result = generic_file_write_iter(iocb, from); _leave(" = %zd", result); @@ -835,13 +840,18 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) */ int afs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - struct inode *inode = file_inode(file); - struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); + struct afs_file *af = file->private_data; + int ret; _enter("{%llx:%llu},{n=%pD},%d", vnode->fid.vid, vnode->fid.vnode, file, datasync); + ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + return file_write_and_wait_range(file, start, end); } @@ -855,11 +865,14 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf) struct file *file = vmf->vma->vm_file; struct inode *inode = file_inode(file); struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_file *af = file->private_data; unsigned long priv; vm_fault_t ret = VM_FAULT_RETRY; _enter("{{%llx:%llu}},{%lx}", vnode->fid.vid, vnode->fid.vnode, page->index); + afs_validate(vnode, af->key); + sb_start_pagefault(inode->i_sb); /* Wait for the page to be written to the cache before we allow it to -- cgit v1.2.3 From 63d49d843ef5fffeea069e0ffdfbd2bf40ba01c6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 18:11:33 +0100 Subject: afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation The AFS filesystem is currently triggering the silly-rename cleanup from afs_d_revalidate() when it sees that a dentry has been changed by a third party[1]. It should not be doing this as the cleanup includes deleting the silly-rename target file on iput. Fix this by removing the places in the d_revalidate handling that validate anything other than the directory and the dirent. It probably should not be looking to validate the target inode of the dentry also. This includes removing the point in afs_d_revalidate() where the inode that a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED). We don't know it got deleted. It could have been renamed or it could have hard links remaining. This was reproduced by cloning a git repo onto an afs volume on one machine, switching to another machine and doing "git status", then switching back to the first and doing "git status". The second status would show weird output due to ".git/index" getting deleted by the above mentioned mechanism. A simpler way to do it is to do: machine 1: touch a machine 2: touch b; mv -f b a machine 1: stat a on an afs volume. The bug shows up as the stat failing with ENOENT and the file server log showing that machine 1 deleted "a". Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename") Reported-by: Markus Suvanto Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1] Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/ --- fs/afs/dir.c | 46 +++++++--------------------------------------- 1 file changed, 7 insertions(+), 39 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index a8e3ae55f1f9..4579bbda4634 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1077,9 +1077,9 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry, */ static int afs_d_revalidate_rcu(struct dentry *dentry) { - struct afs_vnode *dvnode, *vnode; + struct afs_vnode *dvnode; struct dentry *parent; - struct inode *dir, *inode; + struct inode *dir; long dir_version, de_version; _enter("%p", dentry); @@ -1109,18 +1109,6 @@ static int afs_d_revalidate_rcu(struct dentry *dentry) return -ECHILD; } - /* Check to see if the vnode referred to by the dentry still - * has a callback. - */ - if (d_really_is_positive(dentry)) { - inode = d_inode_rcu(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - if (!afs_check_validity(vnode)) - return -ECHILD; - } - } - return 1; /* Still valid */ } @@ -1156,17 +1144,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (IS_ERR(key)) key = NULL; - if (d_really_is_positive(dentry)) { - inode = d_inode(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - afs_validate(vnode, key); - if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) - goto out_bad; - } - } - - /* lock down the parent dentry so we can peer at it */ + /* Hold the parent dentry so we can peer at it */ parent = dget_parent(dentry); dir = AFS_FS_I(d_inode(parent)); @@ -1175,7 +1153,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (test_bit(AFS_VNODE_DELETED, &dir->flags)) { _debug("%pd: parent dir deleted", dentry); - goto out_bad_parent; + goto not_found; } /* We only need to invalidate a dentry if the server's copy changed @@ -1201,12 +1179,12 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) case 0: /* the filename maps to something */ if (d_really_is_negative(dentry)) - goto out_bad_parent; + goto not_found; inode = d_inode(dentry); if (is_bad_inode(inode)) { printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n", dentry); - goto out_bad_parent; + goto not_found; } vnode = AFS_FS_I(inode); @@ -1228,9 +1206,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) dentry, fid.unique, vnode->fid.unique, vnode->vfs_inode.i_generation); - write_seqlock(&vnode->cb_lock); - set_bit(AFS_VNODE_DELETED, &vnode->flags); - write_sequnlock(&vnode->cb_lock); goto not_found; } goto out_valid; @@ -1245,7 +1220,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) default: _debug("failed to iterate dir %pd: %d", parent, ret); - goto out_bad_parent; + goto not_found; } out_valid: @@ -1256,16 +1231,9 @@ out_valid_noupdate: _leave(" = 1 [valid]"); return 1; - /* the dirent, if it exists, now points to a different vnode */ not_found: - spin_lock(&dentry->d_lock); - dentry->d_flags |= DCACHE_NFSFS_RENAMED; - spin_unlock(&dentry->d_lock); - -out_bad_parent: _debug("dropping dentry %pd2", dentry); dput(parent); -out_bad: key_put(key); _leave(" = 0 [bad]"); -- cgit v1.2.3 From 6e0e99d58a6530cf65f10e4bb16630c5be6c254d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Sep 2021 16:43:10 +0100 Subject: afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include #include #include #include #include #include int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ --- fs/afs/callback.c | 42 ++++++++++++++++++++++++++++++++-- fs/afs/cell.c | 2 ++ fs/afs/file.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- fs/afs/internal.h | 8 +++++++ fs/afs/server.c | 2 ++ fs/afs/super.c | 1 + mm/memory.c | 1 + 7 files changed, 120 insertions(+), 3 deletions(-) diff --git a/fs/afs/callback.c b/fs/afs/callback.c index 7d9b23d981bf..1dd7543dbf9f 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -20,6 +20,37 @@ #include #include "internal.h" +/* + * Handle invalidation of an mmap'd file. We invalidate all the PTEs referring + * to the pages in this file's pagecache, forcing the kernel to go through + * ->fault() or ->page_mkwrite() - at which point we can handle invalidation + * more fully. + */ +void afs_invalidate_mmap_work(struct work_struct *work) +{ + struct afs_vnode *vnode = container_of(work, struct afs_vnode, cb_work); + + unmap_mapping_pages(vnode->vfs_inode.i_mapping, 0, 0, false); +} + +void afs_server_init_callback_work(struct work_struct *work) +{ + struct afs_server *server = container_of(work, struct afs_server, initcb_work); + struct afs_vnode *vnode; + struct afs_cell *cell = server->cell; + + down_read(&cell->fs_open_mmaps_lock); + + list_for_each_entry(vnode, &cell->fs_open_mmaps, cb_mmap_link) { + if (vnode->cb_server == server) { + clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags); + queue_work(system_unbound_wq, &vnode->cb_work); + } + } + + up_read(&cell->fs_open_mmaps_lock); +} + /* * Allow the fileserver to request callback state (re-)initialisation. * Unfortunately, UUIDs are not guaranteed unique. @@ -29,8 +60,10 @@ void afs_init_callback_state(struct afs_server *server) rcu_read_lock(); do { server->cb_s_break++; - server = rcu_dereference(server->uuid_next); - } while (0); + if (!list_empty(&server->cell->fs_open_mmaps)) + queue_work(system_unbound_wq, &server->initcb_work); + + } while ((server = rcu_dereference(server->uuid_next))); rcu_read_unlock(); } @@ -49,6 +82,11 @@ void __afs_break_callback(struct afs_vnode *vnode, enum afs_cb_break_reason reas if (vnode->lock_state == AFS_VNODE_LOCK_WAITING_FOR_CB) afs_lock_may_be_available(vnode); + if (reason != afs_cb_break_for_deleted && + vnode->status.type == AFS_FTYPE_FILE && + atomic_read(&vnode->cb_nr_mmap)) + queue_work(system_unbound_wq, &vnode->cb_work); + trace_afs_cb_break(&vnode->fid, vnode->cb_break, reason, true); } else { trace_afs_cb_break(&vnode->fid, vnode->cb_break, reason, false); diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 887b673f6223..d88407fb9bc0 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -166,6 +166,8 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net, seqlock_init(&cell->volume_lock); cell->fs_servers = RB_ROOT; seqlock_init(&cell->fs_lock); + INIT_LIST_HEAD(&cell->fs_open_mmaps); + init_rwsem(&cell->fs_open_mmaps_lock); rwlock_init(&cell->vl_servers_lock); cell->flags = (1 << AFS_CELL_FL_CHECK_ALIAS); diff --git a/fs/afs/file.c b/fs/afs/file.c index 4c8d786b53e0..e6c447ae91f3 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -25,6 +25,9 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags); static void afs_readahead(struct readahead_control *ractl); static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter); +static void afs_vm_open(struct vm_area_struct *area); +static void afs_vm_close(struct vm_area_struct *area); +static vm_fault_t afs_vm_map_pages(struct vm_fault *vmf, pgoff_t start_pgoff, pgoff_t end_pgoff); const struct file_operations afs_file_operations = { .open = afs_open, @@ -60,8 +63,10 @@ const struct address_space_operations afs_fs_aops = { }; static const struct vm_operations_struct afs_vm_ops = { + .open = afs_vm_open, + .close = afs_vm_close, .fault = filemap_fault, - .map_pages = filemap_map_pages, + .map_pages = afs_vm_map_pages, .page_mkwrite = afs_page_mkwrite, }; @@ -492,19 +497,79 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags) return 1; } +static void afs_add_open_mmap(struct afs_vnode *vnode) +{ + if (atomic_inc_return(&vnode->cb_nr_mmap) == 1) { + down_write(&vnode->volume->cell->fs_open_mmaps_lock); + + list_add_tail(&vnode->cb_mmap_link, + &vnode->volume->cell->fs_open_mmaps); + + up_write(&vnode->volume->cell->fs_open_mmaps_lock); + } +} + +static void afs_drop_open_mmap(struct afs_vnode *vnode) +{ + if (!atomic_dec_and_test(&vnode->cb_nr_mmap)) + return; + + down_write(&vnode->volume->cell->fs_open_mmaps_lock); + + if (atomic_read(&vnode->cb_nr_mmap) == 0) + list_del_init(&vnode->cb_mmap_link); + + up_write(&vnode->volume->cell->fs_open_mmaps_lock); + flush_work(&vnode->cb_work); +} + /* * Handle setting up a memory mapping on an AFS file. */ static int afs_file_mmap(struct file *file, struct vm_area_struct *vma) { + struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); int ret; + afs_add_open_mmap(vnode); + ret = generic_file_mmap(file, vma); if (ret == 0) vma->vm_ops = &afs_vm_ops; + else + afs_drop_open_mmap(vnode); return ret; } +static void afs_vm_open(struct vm_area_struct *vma) +{ + afs_add_open_mmap(AFS_FS_I(file_inode(vma->vm_file))); +} + +static void afs_vm_close(struct vm_area_struct *vma) +{ + afs_drop_open_mmap(AFS_FS_I(file_inode(vma->vm_file))); +} + +static vm_fault_t afs_vm_map_pages(struct vm_fault *vmf, pgoff_t start_pgoff, pgoff_t end_pgoff) +{ + struct afs_vnode *vnode = AFS_FS_I(file_inode(vmf->vma->vm_file)); + struct afs_file *af = vmf->vma->vm_file->private_data; + + switch (afs_validate(vnode, af->key)) { + case 0: + return filemap_map_pages(vmf, start_pgoff, end_pgoff); + case -ENOMEM: + return VM_FAULT_OOM; + case -EINTR: + case -ERESTARTSYS: + return VM_FAULT_RETRY; + case -ESTALE: + default: + return VM_FAULT_SIGBUS; + } +} + static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) { struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 5ed416f4ff33..0deeb76c67d0 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -390,6 +390,8 @@ struct afs_cell { /* Active fileserver interaction state. */ struct rb_root fs_servers; /* afs_server (by server UUID) */ seqlock_t fs_lock; /* For fs_servers */ + struct rw_semaphore fs_open_mmaps_lock; + struct list_head fs_open_mmaps; /* List of vnodes that are mmapped */ /* VL server list. */ rwlock_t vl_servers_lock; /* Lock on vl_servers */ @@ -503,6 +505,7 @@ struct afs_server { struct hlist_node addr4_link; /* Link in net->fs_addresses4 */ struct hlist_node addr6_link; /* Link in net->fs_addresses6 */ struct hlist_node proc_link; /* Link in net->fs_proc */ + struct work_struct initcb_work; /* Work for CB.InitCallBackState* */ struct afs_server *gc_next; /* Next server in manager's list */ time64_t unuse_time; /* Time at which last unused */ unsigned long flags; @@ -657,7 +660,10 @@ struct afs_vnode { afs_lock_type_t lock_type : 8; /* outstanding callback notification on this file */ + struct work_struct cb_work; /* Work for mmap'd files */ + struct list_head cb_mmap_link; /* Link in cell->fs_open_mmaps */ void *cb_server; /* Server with callback/filelock */ + atomic_t cb_nr_mmap; /* Number of mmaps */ unsigned int cb_s_break; /* Mass break counter on ->server */ unsigned int cb_v_break; /* Mass break counter on ->volume */ unsigned int cb_break; /* Break counter on vnode */ @@ -965,6 +971,8 @@ extern struct fscache_cookie_def afs_vnode_cache_index_def; /* * callback.c */ +extern void afs_invalidate_mmap_work(struct work_struct *); +extern void afs_server_init_callback_work(struct work_struct *work); extern void afs_init_callback_state(struct afs_server *); extern void __afs_break_callback(struct afs_vnode *, enum afs_cb_break_reason); extern void afs_break_callback(struct afs_vnode *, enum afs_cb_break_reason); diff --git a/fs/afs/server.c b/fs/afs/server.c index 684a2b02b9ff..6e5b9a19b234 100644 --- a/fs/afs/server.c +++ b/fs/afs/server.c @@ -235,6 +235,7 @@ static struct afs_server *afs_alloc_server(struct afs_cell *cell, server->addr_version = alist->version; server->uuid = *uuid; rwlock_init(&server->fs_lock); + INIT_WORK(&server->initcb_work, afs_server_init_callback_work); init_waitqueue_head(&server->probe_wq); INIT_LIST_HEAD(&server->probe_link); spin_lock_init(&server->probe_lock); @@ -467,6 +468,7 @@ static void afs_destroy_server(struct afs_net *net, struct afs_server *server) if (test_bit(AFS_SERVER_FL_MAY_HAVE_CB, &server->flags)) afs_give_up_callbacks(net, server); + flush_work(&server->initcb_work); afs_put_server(net, server, afs_server_trace_destroy); } diff --git a/fs/afs/super.c b/fs/afs/super.c index e38bb1e7a4d2..d110def8aa8e 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -698,6 +698,7 @@ static struct inode *afs_alloc_inode(struct super_block *sb) vnode->lock_state = AFS_VNODE_LOCK_NONE; init_rwsem(&vnode->rmdir_lock); + INIT_WORK(&vnode->cb_work, afs_invalidate_mmap_work); _leave(" = %p", &vnode->vfs_inode); return &vnode->vfs_inode; diff --git a/mm/memory.c b/mm/memory.c index 25fc46e87214..adf9b9ef8277 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3403,6 +3403,7 @@ void unmap_mapping_pages(struct address_space *mapping, pgoff_t start, unmap_mapping_range_tree(&mapping->i_mmap, &details); i_mmap_unlock_write(mapping); } +EXPORT_SYMBOL_GPL(unmap_mapping_pages); /** * unmap_mapping_range - unmap the portion of all mmaps in the specified -- cgit v1.2.3 From 4fe6a946823a9bc8619fd16b7ea7d15914a30f22 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Sep 2021 21:51:01 +0100 Subject: afs: Try to avoid taking RCU read lock when checking vnode validity Try to avoid taking the RCU read lock when checking the validity of a vnode's callback state. The only thing it's needed for is to pin the parent volume's server list whilst we search it to find the record of the server we're currently using to see if it has been reinitialised (ie. it sent us a CB.InitCallBackState* RPC). Do this by the following means: (1) Keep an additional per-cell counter (fs_s_break) that's incremented each time any of the fileservers in the cell reinitialises. Since the new counter can be accessed without RCU from the vnode, we can check that first - and only if it differs, get the RCU read lock and check the volume's server list. (2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now indicates whether the callback promise is still expected to be present on the server. This does the checks as described in (1). (3) Restructure afs_check_validity() to take account of the change in (2). We can also get rid of the valid variable and just use the need_clear variable with the addition of the afs_cb_break_no_promise reason. (4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break and vnode->cb_s_break when it doesn't have cb_lock exclusively locked. Move the change to vnode->cb_v_break to __afs_break_callback(). Delegate the change to vnode->cb_s_break to afs_select_fileserver() and set vnode->cb_fs_s_break there also. (5) afs_validate() no longer needs to get the RCU read lock around its call to afs_check_validity() - and can skip the call entirely if we don't have a promise. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/ --- fs/afs/callback.c | 2 ++ fs/afs/inode.c | 88 ++++++++++++++++++++++------------------------ fs/afs/internal.h | 2 ++ fs/afs/rotate.c | 1 + include/trace/events/afs.h | 8 +++-- 5 files changed, 54 insertions(+), 47 deletions(-) diff --git a/fs/afs/callback.c b/fs/afs/callback.c index 1dd7543dbf9f..1b4d5809808d 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -60,6 +60,7 @@ void afs_init_callback_state(struct afs_server *server) rcu_read_lock(); do { server->cb_s_break++; + atomic_inc(&server->cell->fs_s_break); if (!list_empty(&server->cell->fs_open_mmaps)) queue_work(system_unbound_wq, &server->initcb_work); @@ -77,6 +78,7 @@ void __afs_break_callback(struct afs_vnode *vnode, enum afs_cb_break_reason reas clear_bit(AFS_VNODE_NEW_CONTENT, &vnode->flags); if (test_and_clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) { vnode->cb_break++; + vnode->cb_v_break = vnode->volume->cb_v_break; afs_clear_permits(vnode); if (vnode->lock_state == AFS_VNODE_LOCK_WAITING_FOR_CB) diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 80b6c8d967d5..126daf9969db 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -587,22 +587,32 @@ static void afs_zap_data(struct afs_vnode *vnode) } /* - * Get the server reinit counter for a vnode's current server. + * Check to see if we have a server currently serving this volume and that it + * hasn't been reinitialised or dropped from the list. */ -static bool afs_get_s_break_rcu(struct afs_vnode *vnode, unsigned int *_s_break) +static bool afs_check_server_good(struct afs_vnode *vnode) { - struct afs_server_list *slist = rcu_dereference(vnode->volume->servers); + struct afs_server_list *slist; struct afs_server *server; + bool good; int i; + if (vnode->cb_fs_s_break == atomic_read(&vnode->volume->cell->fs_s_break)) + return true; + + rcu_read_lock(); + + slist = rcu_dereference(vnode->volume->servers); for (i = 0; i < slist->nr_servers; i++) { server = slist->servers[i].server; if (server == vnode->cb_server) { - *_s_break = READ_ONCE(server->cb_s_break); - return true; + good = (vnode->cb_s_break == server->cb_s_break); + rcu_read_unlock(); + return good; } } + rcu_read_unlock(); return false; } @@ -611,57 +621,46 @@ static bool afs_get_s_break_rcu(struct afs_vnode *vnode, unsigned int *_s_break) */ bool afs_check_validity(struct afs_vnode *vnode) { - struct afs_volume *volume = vnode->volume; enum afs_cb_break_reason need_clear = afs_cb_break_no_break; time64_t now = ktime_get_real_seconds(); - bool valid; - unsigned int cb_break, cb_s_break, cb_v_break; + unsigned int cb_break; int seq = 0; do { read_seqbegin_or_lock(&vnode->cb_lock, &seq); - cb_v_break = READ_ONCE(volume->cb_v_break); cb_break = vnode->cb_break; - if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags) && - afs_get_s_break_rcu(vnode, &cb_s_break)) { - if (vnode->cb_s_break != cb_s_break || - vnode->cb_v_break != cb_v_break) { - vnode->cb_s_break = cb_s_break; - vnode->cb_v_break = cb_v_break; - need_clear = afs_cb_break_for_vsbreak; - valid = false; - } else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) { + if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) { + if (vnode->cb_v_break != vnode->volume->cb_v_break) + need_clear = afs_cb_break_for_v_break; + else if (!afs_check_server_good(vnode)) + need_clear = afs_cb_break_for_s_reinit; + else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) need_clear = afs_cb_break_for_zap; - valid = false; - } else if (vnode->cb_expires_at - 10 <= now) { + else if (vnode->cb_expires_at - 10 <= now) need_clear = afs_cb_break_for_lapsed; - valid = false; - } else { - valid = true; - } } else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) { - valid = true; + ; } else { - vnode->cb_v_break = cb_v_break; - valid = false; + need_clear = afs_cb_break_no_promise; } } while (need_seqretry(&vnode->cb_lock, seq)); done_seqretry(&vnode->cb_lock, seq); - if (need_clear != afs_cb_break_no_break) { - write_seqlock(&vnode->cb_lock); - if (cb_break == vnode->cb_break) - __afs_break_callback(vnode, need_clear); - else - trace_afs_cb_miss(&vnode->fid, need_clear); - write_sequnlock(&vnode->cb_lock); - valid = false; - } + if (need_clear == afs_cb_break_no_break) + return true; - return valid; + write_seqlock(&vnode->cb_lock); + if (need_clear == afs_cb_break_no_promise) + vnode->cb_v_break = vnode->volume->cb_v_break; + else if (cb_break == vnode->cb_break) + __afs_break_callback(vnode, need_clear); + else + trace_afs_cb_miss(&vnode->fid, need_clear); + write_sequnlock(&vnode->cb_lock); + return false; } /* @@ -675,21 +674,20 @@ bool afs_check_validity(struct afs_vnode *vnode) */ int afs_validate(struct afs_vnode *vnode, struct key *key) { - bool valid; int ret; _enter("{v={%llx:%llu} fl=%lx},%x", vnode->fid.vid, vnode->fid.vnode, vnode->flags, key_serial(key)); - rcu_read_lock(); - valid = afs_check_validity(vnode); - rcu_read_unlock(); - - if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) - clear_nlink(&vnode->vfs_inode); + if (unlikely(test_bit(AFS_VNODE_DELETED, &vnode->flags))) { + if (vnode->vfs_inode.i_nlink) + clear_nlink(&vnode->vfs_inode); + goto valid; + } - if (valid) + if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags) && + afs_check_validity(vnode)) goto valid; down_write(&vnode->validate_lock); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 0deeb76c67d0..c97618855b46 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -392,6 +392,7 @@ struct afs_cell { seqlock_t fs_lock; /* For fs_servers */ struct rw_semaphore fs_open_mmaps_lock; struct list_head fs_open_mmaps; /* List of vnodes that are mmapped */ + atomic_t fs_s_break; /* Counter of CB.InitCallBackState messages */ /* VL server list. */ rwlock_t vl_servers_lock; /* Lock on vl_servers */ @@ -664,6 +665,7 @@ struct afs_vnode { struct list_head cb_mmap_link; /* Link in cell->fs_open_mmaps */ void *cb_server; /* Server with callback/filelock */ atomic_t cb_nr_mmap; /* Number of mmaps */ + unsigned int cb_fs_s_break; /* Mass server break counter (cell->fs_s_break) */ unsigned int cb_s_break; /* Mass break counter on ->server */ unsigned int cb_v_break; /* Mass break counter on ->volume */ unsigned int cb_break; /* Break counter on vnode */ diff --git a/fs/afs/rotate.c b/fs/afs/rotate.c index d83f13c44b92..79e1a5f6701b 100644 --- a/fs/afs/rotate.c +++ b/fs/afs/rotate.c @@ -374,6 +374,7 @@ selected_server: if (vnode->cb_server != server) { vnode->cb_server = server; vnode->cb_s_break = server->cb_s_break; + vnode->cb_fs_s_break = atomic_read(&server->cell->fs_s_break); vnode->cb_v_break = vnode->volume->cb_v_break; clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags); } diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h index 9f73ed2cf061..bca73e8c8cde 100644 --- a/include/trace/events/afs.h +++ b/include/trace/events/afs.h @@ -306,11 +306,13 @@ enum afs_flock_operation { enum afs_cb_break_reason { afs_cb_break_no_break, + afs_cb_break_no_promise, afs_cb_break_for_callback, afs_cb_break_for_deleted, afs_cb_break_for_lapsed, + afs_cb_break_for_s_reinit, afs_cb_break_for_unlink, - afs_cb_break_for_vsbreak, + afs_cb_break_for_v_break, afs_cb_break_for_volume_callback, afs_cb_break_for_zap, }; @@ -602,11 +604,13 @@ enum afs_cb_break_reason { #define afs_cb_break_reasons \ EM(afs_cb_break_no_break, "no-break") \ + EM(afs_cb_break_no_promise, "no-promise") \ EM(afs_cb_break_for_callback, "break-cb") \ EM(afs_cb_break_for_deleted, "break-del") \ EM(afs_cb_break_for_lapsed, "break-lapsed") \ + EM(afs_cb_break_for_s_reinit, "s-reinit") \ EM(afs_cb_break_for_unlink, "break-unlink") \ - EM(afs_cb_break_for_vsbreak, "break-vs") \ + EM(afs_cb_break_for_v_break, "break-v") \ EM(afs_cb_break_for_volume_callback, "break-v-cb") \ E_(afs_cb_break_for_zap, "break-zap") -- cgit v1.2.3 From b537a3c21775075395af475dcc6ef212fcf29db8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Sep 2021 00:01:52 +0100 Subject: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended. Fixes: b9b1f8d5930a ("AFS: write support fixes") Reported-by: Markus Suvanto Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org cc: openafs-devel@openafs.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c9 [1] Link: https://lore.kernel.org/r/951332.1631308745@warthog.procyon.org.uk/ --- fs/afs/fs_probe.c | 8 +++++++- fs/afs/fsclient.c | 31 ++++++++++++++++++++----------- fs/afs/internal.h | 1 + fs/afs/protocol_afs.h | 15 +++++++++++++++ fs/afs/protocol_yfs.h | 6 ++++++ 5 files changed, 49 insertions(+), 12 deletions(-) create mode 100644 fs/afs/protocol_afs.h diff --git a/fs/afs/fs_probe.c b/fs/afs/fs_probe.c index e7e98ad63a91..c0031a3ab42f 100644 --- a/fs/afs/fs_probe.c +++ b/fs/afs/fs_probe.c @@ -9,6 +9,7 @@ #include #include "afs_fs.h" #include "internal.h" +#include "protocol_afs.h" #include "protocol_yfs.h" static unsigned int afs_fs_probe_fast_poll_interval = 30 * HZ; @@ -102,7 +103,7 @@ void afs_fileserver_probe_result(struct afs_call *call) struct afs_addr_list *alist = call->alist; struct afs_server *server = call->server; unsigned int index = call->addr_ix; - unsigned int rtt_us = 0; + unsigned int rtt_us = 0, cap0; int ret = call->error; _enter("%pU,%u", &server->uuid, index); @@ -159,6 +160,11 @@ responded: clear_bit(AFS_SERVER_FL_IS_YFS, &server->flags); alist->addrs[index].srx_service = call->service_id; } + cap0 = ntohl(call->tmp); + if (cap0 & AFS3_VICED_CAPABILITY_64BITFILES) + set_bit(AFS_SERVER_FL_HAS_FS64, &server->flags); + else + clear_bit(AFS_SERVER_FL_HAS_FS64, &server->flags); } if (rxrpc_kernel_get_srtt(call->net->socket, call->rxcall, &rtt_us) && diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index dd3f45d906d2..4943413d9c5f 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -456,9 +456,7 @@ void afs_fs_fetch_data(struct afs_operation *op) struct afs_read *req = op->fetch.req; __be32 *bp; - if (upper_32_bits(req->pos) || - upper_32_bits(req->len) || - upper_32_bits(req->pos + req->len)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_fetch_data64(op); _enter(""); @@ -1113,9 +1111,7 @@ void afs_fs_store_data(struct afs_operation *op) (unsigned long long)op->store.pos, (unsigned long long)op->store.i_size); - if (upper_32_bits(op->store.pos) || - upper_32_bits(op->store.size) || - upper_32_bits(op->store.i_size)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_store_data64(op); call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData, @@ -1229,7 +1225,7 @@ static void afs_fs_setattr_size(struct afs_operation *op) key_serial(op->key), vp->fid.vid, vp->fid.vnode); ASSERT(attr->ia_valid & ATTR_SIZE); - if (upper_32_bits(attr->ia_size)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_setattr_size64(op); call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData_as_Status, @@ -1657,20 +1653,33 @@ static int afs_deliver_fs_get_capabilities(struct afs_call *call) return ret; count = ntohl(call->tmp); - call->count = count; call->count2 = count; - afs_extract_discard(call, count * sizeof(__be32)); + if (count == 0) { + call->unmarshall = 4; + call->tmp = 0; + break; + } + + /* Extract the first word of the capabilities to call->tmp */ + afs_extract_to_tmp(call); call->unmarshall++; fallthrough; - /* Extract capabilities words */ case 2: ret = afs_extract_data(call, false); if (ret < 0) return ret; - /* TODO: Examine capabilities */ + afs_extract_discard(call, (count - 1) * sizeof(__be32)); + call->unmarshall++; + fallthrough; + + /* Extract remaining capabilities words */ + case 3: + ret = afs_extract_data(call, false); + if (ret < 0) + return ret; call->unmarshall++; break; diff --git a/fs/afs/internal.h b/fs/afs/internal.h index c97618855b46..b0fe27ae60db 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -520,6 +520,7 @@ struct afs_server { #define AFS_SERVER_FL_IS_YFS 16 /* Server is YFS not AFS */ #define AFS_SERVER_FL_NO_IBULK 17 /* Fileserver doesn't support FS.InlineBulkStatus */ #define AFS_SERVER_FL_NO_RM2 18 /* Fileserver doesn't support YFS.RemoveFile2 */ +#define AFS_SERVER_FL_HAS_FS64 19 /* Fileserver supports FS.{Fetch,Store}Data64 */ atomic_t ref; /* Object refcount */ atomic_t active; /* Active user count */ u32 addr_version; /* Address list version */ diff --git a/fs/afs/protocol_afs.h b/fs/afs/protocol_afs.h new file mode 100644 index 000000000000..0c39358c8b70 --- /dev/null +++ b/fs/afs/protocol_afs.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* AFS protocol bits + * + * Copyright (C) 2021 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ + + +#define AFSCAPABILITIESMAX 196 /* Maximum number of words in a capability set */ + +/* AFS3 Fileserver capabilities word 0 */ +#define AFS3_VICED_CAPABILITY_ERRORTRANS 0x0001 /* Uses UAE errors */ +#define AFS3_VICED_CAPABILITY_64BITFILES 0x0002 /* FetchData64 & StoreData64 supported */ +#define AFS3_VICED_CAPABILITY_WRITELOCKACL 0x0004 /* Can lock a file even without lock perm */ +#define AFS3_VICED_CAPABILITY_SANEACLS 0x0008 /* ACLs reviewed for sanity - don't use */ diff --git a/fs/afs/protocol_yfs.h b/fs/afs/protocol_yfs.h index b5bd03b1d3c7..e4cd89c44c46 100644 --- a/fs/afs/protocol_yfs.h +++ b/fs/afs/protocol_yfs.h @@ -168,3 +168,9 @@ enum yfs_lock_type { yfs_LockMandatoryWrite = 0x101, yfs_LockMandatoryExtend = 0x102, }; + +/* RXYFS Viced Capability Flags */ +#define YFS_VICED_CAPABILITY_ERRORTRANS 0x0001 /* Deprecated v0.195 */ +#define YFS_VICED_CAPABILITY_64BITFILES 0x0002 /* Deprecated v0.195 */ +#define YFS_VICED_CAPABILITY_WRITELOCKACL 0x0004 /* Can lock a file even without lock perm */ +#define YFS_VICED_CAPABILITY_SANEACLS 0x0008 /* Deprecated v0.195 */ -- cgit v1.2.3 From 9d37e1cab2a9d2cee2737973fa455e6f89eee46a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 8 Sep 2021 21:55:19 +0100 Subject: afs: Fix updating of i_blocks on file/dir extension When an afs file or directory is modified locally such that the total file size is extended, i_blocks needs to be recalculated too. Fix this by making afs_write_end() and afs_edit_dir_add() call afs_set_i_size() rather than setting inode->i_size directly as that also recalculates inode->i_blocks. This can be tested by creating and writing into directories and files and then examining them with du. Without this change, directories show a 4 blocks (they start out at 2048 bytes) and files show 0 blocks; with this change, they should show a number of blocks proportional to the file size rounded up to 1024. Fixes: 31143d5d515e ("AFS: implement basic file write support") Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Reported-by: Markus Suvanto Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/ --- fs/afs/dir_edit.c | 4 ++-- fs/afs/inode.c | 10 ---------- fs/afs/internal.h | 10 ++++++++++ fs/afs/write.c | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/afs/dir_edit.c b/fs/afs/dir_edit.c index f4600c1353ad..540b9fc96824 100644 --- a/fs/afs/dir_edit.c +++ b/fs/afs/dir_edit.c @@ -263,7 +263,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode, if (b == nr_blocks) { _debug("init %u", b); afs_edit_init_block(meta, block, b); - i_size_write(&vnode->vfs_inode, (b + 1) * AFS_DIR_BLOCK_SIZE); + afs_set_i_size(vnode, (b + 1) * AFS_DIR_BLOCK_SIZE); } /* Only lower dir pages have a counter in the header. */ @@ -296,7 +296,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode, new_directory: afs_edit_init_block(meta, meta, 0); i_size = AFS_DIR_BLOCK_SIZE; - i_size_write(&vnode->vfs_inode, i_size); + afs_set_i_size(vnode, i_size); slot = AFS_DIR_RESV_BLOCKS0; page = page0; block = meta; diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 126daf9969db..8fcffea2daf5 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -53,16 +53,6 @@ static noinline void dump_vnode(struct afs_vnode *vnode, struct afs_vnode *paren dump_stack(); } -/* - * Set the file size and block count. Estimate the number of 512 bytes blocks - * used, rounded up to nearest 1K for consistency with other AFS clients. - */ -static void afs_set_i_size(struct afs_vnode *vnode, u64 size) -{ - i_size_write(&vnode->vfs_inode, size); - vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1; -} - /* * Initialise an inode from the vnode status. */ diff --git a/fs/afs/internal.h b/fs/afs/internal.h index b0fe27ae60db..0ad97a8fc0d4 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -1596,6 +1596,16 @@ static inline void afs_update_dentry_version(struct afs_operation *op, (void *)(unsigned long)dir_vp->scb.status.data_version; } +/* + * Set the file size and block count. Estimate the number of 512 bytes blocks + * used, rounded up to nearest 1K for consistency with other AFS clients. + */ +static inline void afs_set_i_size(struct afs_vnode *vnode, u64 size) +{ + i_size_write(&vnode->vfs_inode, size); + vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1; +} + /* * Check for a conflicting operation on a directory that we just unlinked from. * If someone managed to sneak a link or an unlink in on the file we just diff --git a/fs/afs/write.c b/fs/afs/write.c index 32a764c24284..2dfe3b3a53d6 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -137,7 +137,7 @@ int afs_write_end(struct file *file, struct address_space *mapping, write_seqlock(&vnode->cb_lock); i_size = i_size_read(&vnode->vfs_inode); if (maybe_i_size > i_size) - i_size_write(&vnode->vfs_inode, maybe_i_size); + afs_set_i_size(vnode, maybe_i_size); write_sequnlock(&vnode->cb_lock); } -- cgit v1.2.3 From 7bb057134d609b9c038a00b6876cf0d37d0118ce Mon Sep 17 00:00:00 2001 From: Carlo Lobrano Date: Fri, 3 Sep 2021 14:39:13 +0200 Subject: USB: serial: option: add Telit LN920 compositions This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 29c765cc8495..a79f51e35115 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1205,6 +1205,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff), /* Telit LN920 (RNDIS) */ + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), -- cgit v1.2.3 From 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 27 Aug 2021 17:53:10 +0300 Subject: platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR() ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR() and unused acpi.h. Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") Reported-by: kernel test robot Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/punit_ipc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel/punit_ipc.c b/drivers/platform/x86/intel/punit_ipc.c index f58b8543f6ac..66bb39fd0ef9 100644 --- a/drivers/platform/x86/intel/punit_ipc.c +++ b/drivers/platform/x86/intel/punit_ipc.c @@ -8,7 +8,6 @@ * which provide mailbox interface for power management usage. */ -#include #include #include #include @@ -319,7 +318,7 @@ static struct platform_driver intel_punit_ipc_driver = { .remove = intel_punit_ipc_remove, .driver = { .name = "intel_punit_ipc", - .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids), + .acpi_match_table = punit_ipc_acpi_ids, }, }; -- cgit v1.2.3 From 4c4a3d7cffb42da21ea8891fc7e6808ae05dbcb5 Mon Sep 17 00:00:00 2001 From: Matan Ziv-Av Date: Sun, 29 Aug 2021 15:07:08 +0300 Subject: lg-laptop: Correctly handle dmi_get_system_info() returning NULL The laptop model is identified by parsing the product name. If no product name is available, do not try to parse it. Default model is 2017. Signed-off-by: Matan Ziv-Av Link: https://lore.kernel.org/r/93ff3bb-503b-f73-bf18-87bae1699ed@svgalib.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/lg-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index 3e520d5bca07..88b551caeaaf 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -655,7 +655,7 @@ static int acpi_add(struct acpi_device *device) goto out_platform_registered; } product = dmi_get_system_info(DMI_PRODUCT_NAME); - if (strlen(product) > 4) + if (product && strlen(product) > 4) switch (product[4]) { case '5': case '6': -- cgit v1.2.3 From 3bf1669b0e033c885ebcb1ddc2334088dd125f2d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Sep 2021 15:02:09 +0200 Subject: platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com --- drivers/platform/x86/touchscreen_dmi.c | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 0e1451b1d9c6..1f9cb756b103 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -141,6 +141,33 @@ static const struct ts_dmi_data chuwi_hi10_pro_data = { .properties = chuwi_hi10_pro_props, }; +static const struct property_entry chuwi_hibook_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 30), + PROPERTY_ENTRY_U32("touchscreen-min-y", 4), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1892), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1276), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data chuwi_hibook_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hibook.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 40392, + .sha256 = { 0xf7, 0xc0, 0xe8, 0x5a, 0x6c, 0xf2, 0xeb, 0x8d, + 0x12, 0xc4, 0x45, 0xbf, 0x55, 0x13, 0x4c, 0x1a, + 0x13, 0x04, 0x31, 0x08, 0x65, 0x73, 0xf7, 0xa8, + 0x1b, 0x7d, 0x59, 0xc9, 0xe6, 0x97, 0xf7, 0x38 }, + }, + .acpi_name = "MSSL0017:00", + .properties = chuwi_hibook_props, +}; + static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 4), PROPERTY_ENTRY_U32("touchscreen-min-y", 6), @@ -979,6 +1006,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), }, }, + { + /* Chuwi HiBook (CWI514) */ + .driver_data = (void *)&chuwi_hibook_data, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + /* Above matches are too generic, add bios-date match */ + DMI_MATCH(DMI_BIOS_DATE, "05/07/2016"), + }, + }, { /* Chuwi Vi8 (CWI506) */ .driver_data = (void *)&chuwi_vi8_data, -- cgit v1.2.3 From 196159d278ae3b49e7bbb7c76822e6008fd89b97 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Sep 2021 15:02:10 +0200 Subject: platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet Add info for getting the firmware directly from the UEFI for the Chuwi Hi10 Plus (CWI527), so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Also tweak the min and width/height values a bit for more accurate position reporting. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com --- drivers/platform/x86/touchscreen_dmi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 1f9cb756b103..033f797861d8 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -100,10 +100,10 @@ static const struct ts_dmi_data chuwi_hi10_air_data = { }; static const struct property_entry chuwi_hi10_plus_props[] = { - PROPERTY_ENTRY_U32("touchscreen-min-x", 0), - PROPERTY_ENTRY_U32("touchscreen-min-y", 5), - PROPERTY_ENTRY_U32("touchscreen-size-x", 1914), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1283), + PROPERTY_ENTRY_U32("touchscreen-min-x", 12), + PROPERTY_ENTRY_U32("touchscreen-min-y", 10), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), @@ -111,6 +111,15 @@ static const struct property_entry chuwi_hi10_plus_props[] = { }; static const struct ts_dmi_data chuwi_hi10_plus_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hi10plus.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 34056, + .sha256 = { 0xfd, 0x0a, 0x08, 0x08, 0x3c, 0xa6, 0x34, 0x4e, + 0x2c, 0x49, 0x9c, 0xcd, 0x7d, 0x44, 0x9d, 0x38, + 0x10, 0x68, 0xb5, 0xbd, 0xb7, 0x2a, 0x63, 0xb5, + 0x67, 0x0b, 0x96, 0xbd, 0x89, 0x67, 0x85, 0x09 }, + }, .acpi_name = "MSSL0017:00", .properties = chuwi_hi10_plus_props, }; -- cgit v1.2.3 From 928faf5e3e8d3ec0388c9363b15355673c567966 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 14 Jul 2021 18:22:38 +0100 Subject: arm64: dts: fvp: Remove panel timings The simple-panel driver already has hard-coded timings for "arm,rtsm-display", and as such screams at us for trying to override a fixed mode from DT. Since the exact values probably don't matter all that much anyway, just remove the DT node to keep boot quiet. Link: https://lore.kernel.org/r/2701c187cf8e0762df38f68cc069ec2c29a3b5a9.1626283322.git.robin.murphy@arm.com Reviewed-by: Linus Walleij Signed-off-by: Robin Murphy Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/fvp-base-revc.dts | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index b8a21092db4d..2732d8e5bb5d 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -192,18 +192,6 @@ remote-endpoint = <&clcd_pads>; }; }; - - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; - }; }; bus@8000000 { -- cgit v1.2.3 From a06c2e5c048e5e07fac9daf3073bd0b6582913c7 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg The id of slv_cnoc_mnoc_cfg node is mistakenly coded as id of slv_blsp_1. It causes the following warning on slv_blsp_1 node adding. Correct the id of slv_cnoc_mnoc_cfg node. [ 1.948180] ------------[ cut here ]------------ [ 1.954122] WARNING: CPU: 2 PID: 7 at drivers/interconnect/core.c:962 icc_node_add+0xe4/0xf8 [ 1.958994] Modules linked in: [ 1.967399] CPU: 2 PID: 7 Comm: kworker/u16:0 Not tainted 5.14.0-rc6-next-20210818 #21 [ 1.970275] Hardware name: Xiaomi Redmi Note 7 (DT) [ 1.978169] Workqueue: events_unbound deferred_probe_work_func [ 1.982945] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.988849] pc : icc_node_add+0xe4/0xf8 [ 1.995699] lr : qnoc_probe+0x350/0x438 [ 1.999519] sp : ffff80001008bb10 [ 2.003337] x29: ffff80001008bb10 x28: 000000000000001a x27: ffffb83ddc61ee28 [ 2.006818] x26: ffff2fe341d44080 x25: ffff2fe340f3aa80 x24: ffffb83ddc98f0e8 [ 2.013938] x23: 0000000000000024 x22: ffff2fe3408b7400 x21: 0000000000000000 [ 2.021054] x20: ffff2fe3408b7410 x19: ffff2fe341d44080 x18: 0000000000000010 [ 2.028173] x17: ffff2fe3bdd0aac0 x16: 0000000000000281 x15: ffff2fe3400f5528 [ 2.035290] x14: 000000000000013f x13: ffff2fe3400f5528 x12: 00000000ffffffea [ 2.042410] x11: ffffb83ddc9109d0 x10: ffffb83ddc8f8990 x9 : ffffb83ddc8f89e8 [ 2.049527] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 2.056645] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : ffffb83ddc9903b0 [ 2.063764] x2 : 1a1f6fde34d45500 x1 : ffff2fe340f3a880 x0 : ffff2fe340f3a880 [ 2.070882] Call trace: [ 2.077989] icc_node_add+0xe4/0xf8 [ 2.080247] qnoc_probe+0x350/0x438 [ 2.083718] platform_probe+0x68/0xd8 [ 2.087191] really_probe+0xb8/0x300 [ 2.091011] __driver_probe_device+0x78/0xe0 [ 2.094659] driver_probe_device+0x80/0x110 [ 2.098911] __device_attach_driver+0x90/0xe0 [ 2.102818] bus_for_each_drv+0x78/0xc8 [ 2.107331] __device_attach+0xf0/0x150 [ 2.110977] device_initial_probe+0x14/0x20 [ 2.114796] bus_probe_device+0x9c/0xa8 [ 2.118963] deferred_probe_work_func+0x88/0xc0 [ 2.122784] process_one_work+0x1a4/0x338 [ 2.127296] worker_thread+0x1f8/0x420 [ 2.131464] kthread+0x150/0x160 [ 2.135107] ret_from_fork+0x10/0x20 [ 2.138495] ---[ end trace 5eea8768cb620e87 ]--- Signed-off-by: Shawn Guo Reviewed-by: Bjorn Andersson Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Link: https://lore.kernel.org/r/20210823014003.31391-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index 632dbdd21915..ac13046537e8 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -307,7 +307,7 @@ DEFINE_QNODE(slv_bimc_cfg, SDM660_SLAVE_BIMC_CFG, 4, -1, 56, true, -1, 0, -1, 0) DEFINE_QNODE(slv_prng, SDM660_SLAVE_PRNG, 4, -1, 44, true, -1, 0, -1, 0); DEFINE_QNODE(slv_spdm, SDM660_SLAVE_SPDM, 4, -1, 60, true, -1, 0, -1, 0); DEFINE_QNODE(slv_qdss_cfg, SDM660_SLAVE_QDSS_CFG, 4, -1, 63, true, -1, 0, -1, 0); -DEFINE_QNODE(slv_cnoc_mnoc_cfg, SDM660_SLAVE_BLSP_1, 4, -1, 66, true, -1, 0, -1, SDM660_MASTER_CNOC_MNOC_CFG); +DEFINE_QNODE(slv_cnoc_mnoc_cfg, SDM660_SLAVE_CNOC_MNOC_CFG, 4, -1, 66, true, -1, 0, -1, SDM660_MASTER_CNOC_MNOC_CFG); DEFINE_QNODE(slv_snoc_cfg, SDM660_SLAVE_SNOC_CFG, 4, -1, 70, true, -1, 0, -1, 0); DEFINE_QNODE(slv_qm_cfg, SDM660_SLAVE_QM_CFG, 4, -1, 212, true, -1, 0, -1, 0); DEFINE_QNODE(slv_clk_ctl, SDM660_SLAVE_CLK_CTL, 4, -1, 47, true, -1, 0, -1, 0); -- cgit v1.2.3 From 5833c9b8766298e73c11766f9585d4ea4fa785ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask The NOC_QOS_PRIORITY shift and mask do not match what vendor kernel defines [1]. Correct them per vendor kernel. As the result of NOC_QOS_PRIORITY_P0_SHIFT being 0, the definition can be dropped and regmap_update_bits() call on P0 can be simplified a bit. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/soc/qcom/msm_bus/msm_bus_noc_adhoc.c?h=LA.UM.8.2.r1-04800-sdm660.0#n37 Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Signed-off-by: Shawn Guo Reviewed-by: Dmitry Baryshkov Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210902054915.28689-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index ac13046537e8..99eef7e2d326 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -44,9 +44,9 @@ #define NOC_PERM_MODE_BYPASS (1 << NOC_QOS_MODE_BYPASS) #define NOC_QOS_PRIORITYn_ADDR(n) (0x8 + (n * 0x1000)) -#define NOC_QOS_PRIORITY_MASK 0xf +#define NOC_QOS_PRIORITY_P1_MASK 0xc +#define NOC_QOS_PRIORITY_P0_MASK 0x3 #define NOC_QOS_PRIORITY_P1_SHIFT 0x2 -#define NOC_QOS_PRIORITY_P0_SHIFT 0x3 #define NOC_QOS_MODEn_ADDR(n) (0xc + (n * 0x1000)) #define NOC_QOS_MODEn_MASK 0x3 @@ -624,13 +624,12 @@ static int qcom_icc_noc_set_qos_priority(struct regmap *rmap, /* Must be updated one at a time, P1 first, P0 last */ val = qos->areq_prio << NOC_QOS_PRIORITY_P1_SHIFT; rc = regmap_update_bits(rmap, NOC_QOS_PRIORITYn_ADDR(qos->qos_port), - NOC_QOS_PRIORITY_MASK, val); + NOC_QOS_PRIORITY_P1_MASK, val); if (rc) return rc; - val = qos->prio_level << NOC_QOS_PRIORITY_P0_SHIFT; return regmap_update_bits(rmap, NOC_QOS_PRIORITYn_ADDR(qos->qos_port), - NOC_QOS_PRIORITY_MASK, val); + NOC_QOS_PRIORITY_P0_MASK, qos->prio_level); } static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw) -- cgit v1.2.3 From cf49e366020396ad83845c1c3bdbaa3c1406f5ce Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Signed-off-by: Shawn Guo Reviewed-by: Rob Herring Acked-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210824043435.23190-2-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- .../bindings/interconnect/qcom,sdm660.yaml | 46 ++++++++++++++++++++-- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml index 29de7807df54..bcd41e491f1d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -31,11 +31,11 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 7 clock-names: minItems: 1 - maxItems: 3 + maxItems: 7 required: - compatible @@ -72,6 +72,32 @@ allOf: contains: enum: - qcom,sdm660-a2noc + then: + properties: + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + clock-names: + items: + - const: bus + - const: bus_a + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm660-bimc - qcom,sdm660-cnoc - qcom,sdm660-gnoc @@ -91,6 +117,7 @@ examples: - | #include #include + #include bimc: interconnect@1008000 { compatible = "qcom,sdm660-bimc"; @@ -123,9 +150,20 @@ examples: compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; }; mnoc: interconnect@1745000 { -- cgit v1.2.3 From 13404ac8882f5225af07545215f4975a564c3740 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Add missing a2noc qos clocks It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. Otherwise, qcom_icc_noc_set_qos_priority() call on mas_ufs or mas_usb_hs node will simply result in a hardware hang on SDM660 SoC. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Signed-off-by: Shawn Guo Tested-by: Bjorn Andersson Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210824043435.23190-3-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index 99eef7e2d326..fb23a5b780a4 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -173,6 +173,16 @@ static const struct clk_bulk_data bus_mm_clocks[] = { { .id = "iface" }, }; +static const struct clk_bulk_data bus_a2noc_clocks[] = { + { .id = "bus" }, + { .id = "bus_a" }, + { .id = "ipa" }, + { .id = "ufs_axi" }, + { .id = "aggre2_ufs_axi" }, + { .id = "aggre2_usb3_axi" }, + { .id = "cfg_noc_usb2_axi" }, +}; + /** * struct qcom_icc_provider - Qualcomm specific interconnect provider * @provider: generic interconnect provider @@ -809,6 +819,10 @@ static int qnoc_probe(struct platform_device *pdev) qp->bus_clks = devm_kmemdup(dev, bus_mm_clocks, sizeof(bus_mm_clocks), GFP_KERNEL); qp->num_clks = ARRAY_SIZE(bus_mm_clocks); + } else if (of_device_is_compatible(dev->of_node, "qcom,sdm660-a2noc")) { + qp->bus_clks = devm_kmemdup(dev, bus_a2noc_clocks, + sizeof(bus_a2noc_clocks), GFP_KERNEL); + qp->num_clks = ARRAY_SIZE(bus_a2noc_clocks); } else { if (of_device_is_compatible(dev->of_node, "qcom,sdm660-bimc")) qp->is_bimc_node = true; -- cgit v1.2.3 From 6f44578430d7888ade1e3bd919c1c2c0724409e5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 13 Sep 2021 14:43:30 +0200 Subject: Revert "ALSA: hda: Drop workaround for a hang at shutdown again" This reverts commit 8fc8e903156f42c66245838441d03607e9067381. It was expected that the fixes in HD-audio codec side would make the workaround redundant, but unfortunately it doesn't seem sufficing. Resurrect the workaround for now. Fixes: 8fc8e903156f ("ALSA: hda: Drop workaround for a hang at shutdown again") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210913124330.24530-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3aa432d814a2..47777439961c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -883,10 +883,11 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev) return azx_get_pos_posbuf(chip, azx_dev); } -static void azx_shutdown_chip(struct azx *chip) +static void __azx_shutdown_chip(struct azx *chip, bool skip_link_reset) { azx_stop_chip(chip); - azx_enter_link_reset(chip); + if (!skip_link_reset) + azx_enter_link_reset(chip); azx_clear_irq_pending(chip); display_power(chip, false); } @@ -895,6 +896,11 @@ static void azx_shutdown_chip(struct azx *chip) static DEFINE_MUTEX(card_list_lock); static LIST_HEAD(card_list); +static void azx_shutdown_chip(struct azx *chip) +{ + __azx_shutdown_chip(chip, false); +} + static void azx_add_card_list(struct azx *chip) { struct hda_intel *hda = container_of(chip, struct hda_intel, chip); @@ -2357,7 +2363,7 @@ static void azx_shutdown(struct pci_dev *pci) return; chip = card->private_data; if (chip && chip->running) - azx_shutdown_chip(chip); + __azx_shutdown_chip(chip, true); } /* PCI IDs */ -- cgit v1.2.3 From 7b9cf9036609428e845dc300aec13822ba2c4ab3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 Sep 2021 12:51:55 +0200 Subject: ALSA: usb-audio: Unify mixer resume and reset_resume procedure USB-audio driver assumes that the normal resume would preserve the device configuration while reset_resume wouldn't, and tries to restore the mixer elements only at reset_resume callback. However, this seems too naive, and some devices do behave differently, resetting the volume at the normal resume; this resulted in the inconsistent volume that surprised users. This patch changes the mixer resume code to handle both the normal and reset resume in the same way, always restoring the original mixer element values. This allows us to unify the both callbacks as well as dropping the no longer used reset_resume field, which ends up with a good code reduction. A slight behavior change by this patch is that now we assign restore_mixer_value() as the default resume callback, and the function is no longer called at reset-resume when the resume callback is overridden by the quirk function. That is, if needed, the quirk resume function would have to handle similarly as restore_mixer_value() by itself. Reported-by: En-Shuo Hsu Cc: Yu-Hsuan Hsu Link: https://lore.kernel.org/r/CADDZ45UPsbpAAqP6=ZkTT8BE-yLii4Y7xSDnjK550G2DhQsMew@mail.gmail.com Link: https://lore.kernel.org/r/20210910105155.12862-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/card.c | 18 ++++-------------- sound/usb/mixer.c | 26 ++++---------------------- sound/usb/mixer.h | 3 +-- sound/usb/mixer_quirks.c | 2 +- 4 files changed, 10 insertions(+), 39 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index fd570a42f043..1764b9302d46 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -1054,7 +1054,7 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) +static int usb_audio_resume(struct usb_interface *intf) { struct snd_usb_audio *chip = usb_get_intfdata(intf); struct snd_usb_stream *as; @@ -1080,7 +1080,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) * we just notify and restart the mixers */ list_for_each_entry(mixer, &chip->mixer_list, list) { - err = snd_usb_mixer_resume(mixer, reset_resume); + err = snd_usb_mixer_resume(mixer); if (err < 0) goto err_out; } @@ -1100,20 +1100,10 @@ err_out: atomic_dec(&chip->active); /* allow autopm after this point */ return err; } - -static int usb_audio_resume(struct usb_interface *intf) -{ - return __usb_audio_resume(intf, false); -} - -static int usb_audio_reset_resume(struct usb_interface *intf) -{ - return __usb_audio_resume(intf, true); -} #else #define usb_audio_suspend NULL #define usb_audio_resume NULL -#define usb_audio_reset_resume NULL +#define usb_audio_resume NULL #endif /* CONFIG_PM */ static const struct usb_device_id usb_audio_ids [] = { @@ -1135,7 +1125,7 @@ static struct usb_driver usb_audio_driver = { .disconnect = usb_audio_disconnect, .suspend = usb_audio_suspend, .resume = usb_audio_resume, - .reset_resume = usb_audio_reset_resume, + .reset_resume = usb_audio_resume, .id_table = usb_audio_ids, .supports_autosuspend = 1, }; diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 43bc59575a6e..a2ce535df14b 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -3653,33 +3653,16 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list) return 0; } -static int default_mixer_reset_resume(struct usb_mixer_elem_list *list) -{ - int err; - - if (list->resume) { - err = list->resume(list); - if (err < 0) - return err; - } - return restore_mixer_value(list); -} - -int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume) +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer) { struct usb_mixer_elem_list *list; - usb_mixer_elem_resume_func_t f; int id, err; /* restore cached mixer values */ for (id = 0; id < MAX_ID_ELEMS; id++) { for_each_mixer_elem(list, mixer, id) { - if (reset_resume) - f = list->reset_resume; - else - f = list->resume; - if (f) { - err = f(list); + if (list->resume) { + err = list->resume(list); if (err < 0) return err; } @@ -3700,7 +3683,6 @@ void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list, list->id = unitid; list->dump = snd_usb_mixer_dump_cval; #ifdef CONFIG_PM - list->resume = NULL; - list->reset_resume = default_mixer_reset_resume; + list->resume = restore_mixer_value; #endif } diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 876bbc9a71ad..98ea24d91d80 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -70,7 +70,6 @@ struct usb_mixer_elem_list { bool is_std_info; usb_mixer_elem_dump_func_t dump; usb_mixer_elem_resume_func_t resume; - usb_mixer_elem_resume_func_t reset_resume; }; /* iterate over mixer element list of the given unit id */ @@ -121,7 +120,7 @@ int snd_usb_mixer_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag, #ifdef CONFIG_PM int snd_usb_mixer_suspend(struct usb_mixer_interface *mixer); -int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume); +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer); #endif int snd_usb_set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel, diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index a66ce0375fd9..46082dc57be0 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -151,7 +151,7 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer, *listp = list; list->mixer = mixer; list->id = id; - list->reset_resume = resume; + list->resume = resume; kctl = snd_ctl_new1(knew, list); if (!kctl) { kfree(list); -- cgit v1.2.3 From d168cd797982db9db617113644c87b8f5f3cf27e Mon Sep 17 00:00:00 2001 From: Zhi A Wang Date: Thu, 26 Aug 2021 14:38:34 +0000 Subject: drm/i915/gvt: fix the usage of ww lock in gvt scheduler. As the APIs related to ww lock in i915 was changed recently, the usage of ww lock in GVT-g scheduler needs to be changed accrodingly. We noticed a deadlock when GVT-g scheduler submits the workload to i915. After some investigation, it seems the way of how to use ww lock APIs has been changed. Releasing a ww now requires a explicit i915_gem_ww_ctx_fini(). Fixes: 67f1120381df ("drm/i915/gvt: Introduce per object locking in GVT scheduler.") Cc: Zhenyu Wang Signed-off-by: Zhi A Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20210826143834.25410-1-zhi.a.wang@intel.com Acked-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 734c37c5e347..527b59b86312 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -576,7 +576,7 @@ retry: /* No one is going to touch shadow bb from now on. */ i915_gem_object_flush_map(bb->obj); - i915_gem_object_unlock(bb->obj); + i915_gem_ww_ctx_fini(&ww); } } return 0; @@ -630,7 +630,7 @@ retry: return ret; } - i915_gem_object_unlock(wa_ctx->indirect_ctx.obj); + i915_gem_ww_ctx_fini(&ww); /* FIXME: we are not tracking our pinned VMA leaving it * up to the core to fix up the stray pin_count upon -- cgit v1.2.3 From 9c5a4ec69bbf5951f84ada9e0db9c6c50de61808 Mon Sep 17 00:00:00 2001 From: Antonio Martorana Date: Mon, 16 Aug 2021 17:24:39 -0700 Subject: soc: qcom: socinfo: Fixed argument passed to platform_set_data() Set qcom_socinfo pointer as data being stored instead of pointer to soc_device structure. Aligns with future calls to platform_get_data() which expects qcom_socinfo pointer. Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver") Signed-off-by: Antonio Martorana Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org Signed-off-by: Bjorn Andersson --- drivers/soc/qcom/socinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c index 9faf48302f4b..52e581167115 100644 --- a/drivers/soc/qcom/socinfo.c +++ b/drivers/soc/qcom/socinfo.c @@ -628,7 +628,7 @@ static int qcom_socinfo_probe(struct platform_device *pdev) /* Feed the soc specific unique data into entropy pool */ add_device_randomness(info, item_size); - platform_set_drvdata(pdev, qs->soc_dev); + platform_set_drvdata(pdev, qs); return 0; } -- cgit v1.2.3 From f5c03f131dae3f06d08464e6157dd461200f78d9 Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Wed, 18 Aug 2021 08:53:17 +0200 Subject: ARM: dts: qcom: apq8064: use compatible which contains chipid Also resolves these kernel warnings for APQ8064: adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding! adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead. Tested on Nexus 7 2013, no functional changes. Cc: Signed-off-by: David Heidelberg Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 0b2bed6e7adf..7943a062d9b8 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1148,7 +1148,7 @@ }; gpu: adreno-3xx@4300000 { - compatible = "qcom,adreno-3xx"; + compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = ; @@ -1163,7 +1163,6 @@ <&mmcc GFX3D_AHB_CLK>, <&mmcc GFX3D_AXI_CLK>, <&mmcc MMSS_IMEM_AHB_CLK>; - qcom,chipid = <0x03020002>; iommus = <&gfx3d 0 &gfx3d 1 -- cgit v1.2.3 From f1db21c315f4b4f8c3fbea56aac500673132d317 Mon Sep 17 00:00:00 2001 From: Marijn Suijten Date: Sun, 29 Aug 2021 22:30:25 +0200 Subject: ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference The 28NM DSI PLL driver for msm8960 calculates with a 27MHz reference clock and should hence use PXO, not CXO which runs at 19.2MHz. Note that none of the DSI PHY/PLL drivers currently use this "ref" clock; they all rely on (sometimes inexistant) global clock names and usually function normally without a parent clock. This discrepancy will be corrected in a future patch, for which this change needs to be in place first. Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Reviewed-by: Dmitry Baryshkov Signed-off-by: Marijn Suijten Link: https://lore.kernel.org/r/20210829203027.276143-2-marijn.suijten@somainline.org Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 7943a062d9b8..ea02134e6f6d 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -198,7 +198,7 @@ clock-frequency = <19200000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -1305,7 +1305,7 @@ reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; clock-names = "iface_clk", "ref"; clocks = <&mmcc DSI_M_AHB_CLK>, - <&cxo_board>; + <&pxo_board>; }; -- cgit v1.2.3 From 0327c6d01a97a3242cf10717819994aa6e095a1d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 3 Sep 2021 14:24:58 +0100 Subject: fs/ntfs3: Remove redundant initialization of variable err The variable err is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/index.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index 0daca9adc54c..b1175542d854 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -1401,7 +1401,7 @@ ok: static int indx_create_allocate(struct ntfs_index *indx, struct ntfs_inode *ni, CLST *vbn) { - int err = -ENOMEM; + int err; struct ntfs_sb_info *sbi = ni->mi.sbi; struct ATTRIB *bitmap; struct ATTRIB *alloc; -- cgit v1.2.3 From cde81f13ef63d47c3f0742fbe6f17a5123cf6ca4 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:21 +0300 Subject: fs/ntfs3. Add forward declarations for structs to debug.h Add forward declarations for structs so that we can include this file without warnings even without linux/fs.h Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/debug.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ntfs3/debug.h b/fs/ntfs3/debug.h index 31120569a87b..53ef7489c75f 100644 --- a/fs/ntfs3/debug.h +++ b/fs/ntfs3/debug.h @@ -11,6 +11,9 @@ #ifndef _LINUX_NTFS3_DEBUG_H #define _LINUX_NTFS3_DEBUG_H +struct super_block; +struct inode; + #ifndef Add2Ptr #define Add2Ptr(P, I) ((void *)((u8 *)(P) + (I))) #define PtrOffset(B, O) ((size_t)((size_t)(O) - (size_t)(B))) -- cgit v1.2.3 From 4dfe83320e1e9665b986840b426742ea764e08d7 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:22 +0300 Subject: fs/ntfs3: Add missing header files to ntfs.h We do not have header files at all in this file. Add following headers and there is also explanation which for it was added. Note that explanation might not be complete, but it just proofs it is needed. // SECTOR_SHIFT // static_assert() // cpu_to_le64, cpu_to_le32, ALIGN // offsetof() // memcmp() //__le32, __le16 "debug.h" // PtrOffset(), Add2Ptr() Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index 6bb3e595263b..695b684bce20 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -10,6 +10,15 @@ #ifndef _LINUX_NTFS3_NTFS_H #define _LINUX_NTFS3_NTFS_H +#include +#include +#include +#include +#include +#include + +#include "debug.h" + /* TODO: Check 4K MFT record and 512 bytes cluster. */ /* Activate this define to use binary search in indexes. */ -- cgit v1.2.3 From f239b3a95dd4f7daba26ea17f339a5b19a7d40a1 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:23 +0300 Subject: fs/ntfs3: Add missing headers and forward declarations to ntfs_fs.h We do not have headers at all in this file. We should have them so that not every .c file needs to include all of the stuff which this file need for building. This way we can remove some headers from other files and get better picture what is needed. This can save some compilation time. And this can help if we sometimes want to separate this one big header. Also use forward declarations for structs and enums when it not included straight with include and it is used in function declarations input. This will prevent possible compiler warning: xxx declared inside parameter list will not be visible outside of this definition or declaration Here is list which I made when parsing this. There is not necessarily all example from this header file, but this just proofs we need it. SECTOR_SHIFT sb_bread(), put_bh put_page() struct inode (Just struct ntfs_inode need it) kunmap(), kmap() cpu_to_leXX() ALIGN kvfree() struct mutex, mutex_(un/try)lock() PageError() read_mapping_page() struct rb_root struct rw_semaphore krfree(), kzalloc() memset() struct timespec64 uXX, __leXX kuid_t, kgid_t do_div() PAGE_SIZE "debug.h" ntfs_err() (Just one entry. Maybe we can drop this) "ntfs.h" Do you even ask? Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs_fs.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 372cda697dd4..dae6dd4ac619 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -9,6 +9,37 @@ #ifndef _LINUX_NTFS3_NTFS_FS_H #define _LINUX_NTFS3_NTFS_FS_H +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "debug.h" +#include "ntfs.h" + +struct dentry; +struct fiemap_extent_info; +struct user_namespace; +struct page; +struct writeback_control; +enum utf16_endian; + + #define MINUS_ONE_T ((size_t)(-1)) /* Biggest MFT / smallest cluster */ #define MAXIMUM_BYTES_PER_MFT 4096 -- cgit v1.2.3 From b6ba81034b1b74cf426abcece4becda2611504a4 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:24 +0300 Subject: fs/ntfs3: Add missing header and guards to lib/ headers size_t needs header. Add missing header guards so that compiler will only include these ones. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/lib/decompress_common.h | 5 +++++ fs/ntfs3/lib/lib.h | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/fs/ntfs3/lib/decompress_common.h b/fs/ntfs3/lib/decompress_common.h index 2d70ae42f1b5..dd7ced000d0e 100644 --- a/fs/ntfs3/lib/decompress_common.h +++ b/fs/ntfs3/lib/decompress_common.h @@ -5,6 +5,9 @@ * Copyright (C) 2015 Eric Biggers */ +#ifndef _LINUX_NTFS3_LIB_DECOMPRESS_COMMON_H +#define _LINUX_NTFS3_LIB_DECOMPRESS_COMMON_H + #include #include #include @@ -336,3 +339,5 @@ static forceinline u8 *lz_copy(u8 *dst, u32 length, u32 offset, const u8 *bufend return dst; } + +#endif /* _LINUX_NTFS3_LIB_DECOMPRESS_COMMON_H */ diff --git a/fs/ntfs3/lib/lib.h b/fs/ntfs3/lib/lib.h index f508fbad2e71..90309a5ae59c 100644 --- a/fs/ntfs3/lib/lib.h +++ b/fs/ntfs3/lib/lib.h @@ -7,6 +7,10 @@ * - linux kernel code style */ +#ifndef _LINUX_NTFS3_LIB_LIB_H +#define _LINUX_NTFS3_LIB_LIB_H + +#include /* globals from xpress_decompress.c */ struct xpress_decompressor *xpress_allocate_decompressor(void); @@ -24,3 +28,5 @@ int lzx_decompress(struct lzx_decompressor *__restrict d, const void *__restrict compressed_data, size_t compressed_size, void *__restrict uncompressed_data, size_t uncompressed_size); + +#endif /* _LINUX_NTFS3_LIB_LIB_H */ -- cgit v1.2.3 From c632f639d1d9bb3e379741a30c6882342d859daf Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:25 +0300 Subject: fs/ntfs3: Change right headers to bitfunc.c We only need linux/types.h for types like u8 etc. So we can remove rest and help compiler a little bit. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/bitfunc.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/ntfs3/bitfunc.c b/fs/ntfs3/bitfunc.c index ce304d40b5e1..bf10e2da5c6e 100644 --- a/fs/ntfs3/bitfunc.c +++ b/fs/ntfs3/bitfunc.c @@ -5,13 +5,8 @@ * */ -#include -#include -#include -#include +#include -#include "debug.h" -#include "ntfs.h" #include "ntfs_fs.h" #define BITS_IN_SIZE_T (sizeof(size_t) * 8) -- cgit v1.2.3 From f97676611937f4550a60970acadeccbd5e6f124c Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:26 +0300 Subject: fs/ntfs3: Change right headers to upcase.c There is no headers. They will be included through ntfs_fs.c, but that is not right thing to do. Let's include headers what this file need straight away. types.h is needed for __le16, u8 etc. kernel.h is needed for le16_to_cpu() Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/upcase.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/ntfs3/upcase.c b/fs/ntfs3/upcase.c index bbeba778237e..b5e8256fd710 100644 --- a/fs/ntfs3/upcase.c +++ b/fs/ntfs3/upcase.c @@ -5,13 +5,9 @@ * */ -#include -#include -#include -#include +#include +#include -#include "debug.h" -#include "ntfs.h" #include "ntfs_fs.h" static inline u16 upcase_unicode_char(const u16 *upcase, u16 chr) -- cgit v1.2.3 From 977d0558e310113767feed91fdcc618691dd2835 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:27 +0300 Subject: fs/ntfs3: Change right headers to lznt.c There is lot of headers which we do not need in this file. Delete them and add what we really need. Here is list which identify why we need this header. // min() // kzalloc() // offsetof() // memcpy(), memset() // u8, size_t, etc. "debug.h" // PtrOffset() Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/lznt.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/ntfs3/lznt.c b/fs/ntfs3/lznt.c index f1f691a67cc4..12ba42518efe 100644 --- a/fs/ntfs3/lznt.c +++ b/fs/ntfs3/lznt.c @@ -5,13 +5,13 @@ * */ -#include -#include -#include -#include +#include +#include +#include +#include +#include #include "debug.h" -#include "ntfs.h" #include "ntfs_fs.h" // clang-format off -- cgit v1.2.3 From 9c2aadd0fdf88a7ebeebd1e97a9c66b07ad3e14a Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 19:15:28 +0300 Subject: fs/ntfs3: Remove unneeded header files from c files We have lot of unnecessary headers in these files. Remove them so that we help compiler a little bit. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/attrib.c | 5 ----- fs/ntfs3/attrlist.c | 3 --- fs/ntfs3/bitmap.c | 3 --- fs/ntfs3/dir.c | 3 --- fs/ntfs3/file.c | 1 - fs/ntfs3/frecord.c | 3 --- fs/ntfs3/fslog.c | 4 ---- fs/ntfs3/fsntfs.c | 1 - fs/ntfs3/index.c | 1 - fs/ntfs3/inode.c | 2 -- fs/ntfs3/namei.c | 4 ---- fs/ntfs3/record.c | 3 --- fs/ntfs3/run.c | 2 -- fs/ntfs3/super.c | 2 -- fs/ntfs3/xattr.c | 3 --- 15 files changed, 40 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index b1055b284c60..12cff28f3e71 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -6,12 +6,7 @@ * TODO: Merge attr_set_size/attr_data_get_block/attr_allocate_frame? */ -#include -#include #include -#include -#include -#include #include #include "debug.h" diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index fa32399eb517..b9da527b96aa 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -5,10 +5,7 @@ * */ -#include -#include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c index 831501555009..a03584674fea 100644 --- a/fs/ntfs3/bitmap.c +++ b/fs/ntfs3/bitmap.c @@ -10,12 +10,9 @@ * */ -#include #include #include -#include -#include "debug.h" #include "ntfs.h" #include "ntfs_fs.h" diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 40440df021ef..785e72d4392e 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -7,10 +7,7 @@ * */ -#include -#include #include -#include #include #include "debug.h" diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 0743d806c567..5fb3508e5422 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -12,7 +12,6 @@ #include #include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 938b12d56ca6..080264ced909 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -5,11 +5,8 @@ * */ -#include -#include #include #include -#include #include #include "debug.h" diff --git a/fs/ntfs3/fslog.c b/fs/ntfs3/fslog.c index b5853aed0e25..6e7f9b72792b 100644 --- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -6,12 +6,8 @@ */ #include -#include #include -#include -#include #include -#include #include #include "debug.h" diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 91e3743e1442..9232a7f410c6 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -8,7 +8,6 @@ #include #include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index b1175542d854..35b77c92e96d 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -8,7 +8,6 @@ #include #include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index 9f740fd301b2..33f278a0947c 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -5,10 +5,8 @@ * */ -#include #include #include -#include #include #include #include diff --git a/fs/ntfs3/namei.c b/fs/ntfs3/namei.c index e58415d07132..1c475da4e19d 100644 --- a/fs/ntfs3/namei.c +++ b/fs/ntfs3/namei.c @@ -5,11 +5,7 @@ * */ -#include -#include #include -#include -#include #include #include "debug.h" diff --git a/fs/ntfs3/record.c b/fs/ntfs3/record.c index 103705c86772..861e35791506 100644 --- a/fs/ntfs3/record.c +++ b/fs/ntfs3/record.c @@ -5,10 +5,7 @@ * */ -#include -#include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/run.c b/fs/ntfs3/run.c index 26ed2b64345e..a8fec651f973 100644 --- a/fs/ntfs3/run.c +++ b/fs/ntfs3/run.c @@ -7,10 +7,8 @@ */ #include -#include #include #include -#include #include "debug.h" #include "ntfs.h" diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 3cba0b5e7ac7..acfa00acf4dd 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -23,14 +23,12 @@ * */ -#include #include #include #include #include #include #include -#include #include #include #include diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 6f88cb77a17f..a8c5a899f0dd 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -5,10 +5,7 @@ * */ -#include -#include #include -#include #include #include #include -- cgit v1.2.3 From 162333efa8dc4984d2ca0a2eb85528e13366f271 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 18:40:48 +0300 Subject: fs/ntfs3: Limit binary search table size Current binary search allocates memory for table and fill whole table before we start actual binary search. This is quite inefficient because table fill will always be O(n). Also if table is huge we need to reallocate memory which is costly. This implementation use just stack memory and always when table is full we will check if last element is <= and if not start table fill again. The idea was that it would be same cost as table reallocation. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/index.c | 110 +++++++++++++++++++++---------------------------------- 1 file changed, 41 insertions(+), 69 deletions(-) diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index 35b77c92e96d..a16256ab3e9f 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -677,98 +677,70 @@ static struct NTFS_DE *hdr_find_e(const struct ntfs_index *indx, u32 off = le32_to_cpu(hdr->de_off); #ifdef NTFS3_INDEX_BINARY_SEARCH - int max_idx = 0, fnd, min_idx; - int nslots = 64; - u16 *offs; + struct NTFS_DE *found = NULL; + int min_idx = 0, mid_idx, max_idx = 0; + int diff2; + u16 offs[64]; if (end > 0x10000) goto next; - offs = kmalloc(sizeof(u16) * nslots, GFP_NOFS); - if (!offs) - goto next; +fill_table: + if (off + sizeof(struct NTFS_DE) > end) + return NULL; - /* Use binary search algorithm. */ -next1: - if (off + sizeof(struct NTFS_DE) > end) { - e = NULL; - goto out1; - } e = Add2Ptr(hdr, off); e_size = le16_to_cpu(e->size); - if (e_size < sizeof(struct NTFS_DE) || off + e_size > end) { - e = NULL; - goto out1; - } - - if (max_idx >= nslots) { - u16 *ptr; - int new_slots = ALIGN(2 * nslots, 8); - - ptr = kmalloc(sizeof(u16) * new_slots, GFP_NOFS); - if (ptr) - memcpy(ptr, offs, sizeof(u16) * max_idx); - kfree(offs); - offs = ptr; - nslots = new_slots; - if (!ptr) - goto next; - } - - /* Store entry table. */ - offs[max_idx] = off; + if (e_size < sizeof(struct NTFS_DE) || off + e_size > end) + return NULL; if (!de_is_last(e)) { + offs[max_idx] = off; off += e_size; - max_idx += 1; - goto next1; - } - /* - * Table of pointers is created. - * Use binary search to find entry that is <= to the search value. - */ - fnd = -1; - min_idx = 0; + max_idx++; + if (max_idx < ARRAY_SIZE(offs)) + goto fill_table; - while (min_idx <= max_idx) { - int mid_idx = min_idx + ((max_idx - min_idx) >> 1); - int diff2; - - e = Add2Ptr(hdr, offs[mid_idx]); + max_idx--; + } - e_key_len = le16_to_cpu(e->key_size); +binary_search: + e_key_len = le16_to_cpu(e->key_size); - diff2 = (*cmp)(key, key_len, e + 1, e_key_len, ctx); + diff2 = (*cmp)(key, key_len, e + 1, e_key_len, ctx); + if (diff2 > 0) { + if (found) { + min_idx = mid_idx + 1; + } else { + if (de_is_last(e)) + return NULL; - if (!diff2) { - *diff = 0; - goto out1; + max_idx = 0; + goto fill_table; } - - if (diff2 < 0) { + } else if (diff2 < 0) { + if (found) max_idx = mid_idx - 1; - fnd = mid_idx; - if (!fnd) - break; - } else { - min_idx = mid_idx + 1; - } - } + else + max_idx--; - if (fnd == -1) { - e = NULL; - goto out1; + found = e; + } else { + *diff = 0; + return e; } - *diff = -1; - e = Add2Ptr(hdr, offs[fnd]); + if (min_idx > max_idx) { + *diff = -1; + return found; + } -out1: - kfree(offs); + mid_idx = (min_idx + max_idx) >> 1; + e = Add2Ptr(hdr, offs[mid_idx]); - return e; + goto binary_search; #endif next: -- cgit v1.2.3 From ef9297007e9904588682699e618c56401f61d1c2 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 18:40:49 +0300 Subject: fs/ntfs3: Make binary search to search smaller chunks in beginning We could try to optimize algorithm to first fill just small table and after that use bigger table all the way up to ARRAY_SIZE(offs). This way we can use bigger search array, but not lose benefits with entry count smaller < ARRAY_SIZE(offs). Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/index.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index a16256ab3e9f..3ad1ee608e53 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "debug.h" #include "ntfs.h" @@ -679,8 +680,9 @@ static struct NTFS_DE *hdr_find_e(const struct ntfs_index *indx, #ifdef NTFS3_INDEX_BINARY_SEARCH struct NTFS_DE *found = NULL; int min_idx = 0, mid_idx, max_idx = 0; + int table_size = 8; int diff2; - u16 offs[64]; + u16 offs[128]; if (end > 0x10000) goto next; @@ -700,7 +702,7 @@ fill_table: off += e_size; max_idx++; - if (max_idx < ARRAY_SIZE(offs)) + if (max_idx < table_size) goto fill_table; max_idx--; @@ -718,6 +720,7 @@ binary_search: return NULL; max_idx = 0; + table_size = min(table_size * 2, 128); goto fill_table; } } else if (diff2 < 0) { -- cgit v1.2.3 From 8e69212253d320d4768071086b1111e6ab91d9bd Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 2 Sep 2021 18:40:50 +0300 Subject: fs/ntfs3: Always use binary search with entry search We do not have any reason to keep old linear search in. Before this was used for error path or if table was so big that it cannot be allocated. Current binary search implementation won't need error path. Remove old references to linear entry search. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/index.c | 50 ++++++-------------------------------------------- fs/ntfs3/ntfs.h | 3 --- 2 files changed, 6 insertions(+), 47 deletions(-) diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index 3ad1ee608e53..4f71a91f07d9 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -671,22 +671,16 @@ static struct NTFS_DE *hdr_find_e(const struct ntfs_index *indx, const struct INDEX_HDR *hdr, const void *key, size_t key_len, const void *ctx, int *diff) { - struct NTFS_DE *e; + struct NTFS_DE *e, *found = NULL; NTFS_CMP_FUNC cmp = indx->cmp; + int min_idx = 0, mid_idx, max_idx = 0; + int diff2; + int table_size = 8; u32 e_size, e_key_len; u32 end = le32_to_cpu(hdr->used); u32 off = le32_to_cpu(hdr->de_off); - -#ifdef NTFS3_INDEX_BINARY_SEARCH - struct NTFS_DE *found = NULL; - int min_idx = 0, mid_idx, max_idx = 0; - int table_size = 8; - int diff2; u16 offs[128]; - if (end > 0x10000) - goto next; - fill_table: if (off + sizeof(struct NTFS_DE) > end) return NULL; @@ -720,7 +714,8 @@ binary_search: return NULL; max_idx = 0; - table_size = min(table_size * 2, 128); + table_size = min(table_size * 2, + (int)ARRAY_SIZE(offs)); goto fill_table; } } else if (diff2 < 0) { @@ -744,39 +739,6 @@ binary_search: e = Add2Ptr(hdr, offs[mid_idx]); goto binary_search; -#endif - -next: - /* - * Entries index are sorted. - * Enumerate all entries until we find entry - * that is <= to the search value. - */ - if (off + sizeof(struct NTFS_DE) > end) - return NULL; - - e = Add2Ptr(hdr, off); - e_size = le16_to_cpu(e->size); - - if (e_size < sizeof(struct NTFS_DE) || off + e_size > end) - return NULL; - - off += e_size; - - e_key_len = le16_to_cpu(e->key_size); - - *diff = (*cmp)(key, key_len, e + 1, e_key_len, ctx); - if (!*diff) - return e; - - if (*diff <= 0) - return e; - - if (de_is_last(e)) { - *diff = 1; - return e; - } - goto next; } /* diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index 695b684bce20..303a162c3158 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -21,9 +21,6 @@ /* TODO: Check 4K MFT record and 512 bytes cluster. */ -/* Activate this define to use binary search in indexes. */ -#define NTFS3_INDEX_BINARY_SEARCH - /* Check each run for marked clusters. */ #define NTFS3_CHECK_FREE_CLST -- cgit v1.2.3 From a48c730a4e0bf480bcde12d795a9cd6f9ef14d1e Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 7 Sep 2021 12:12:25 -0700 Subject: Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node" This reverts commit 11e03d692101e484df9322f892a8b6e111a82bfd. As per discussion [1] the patch shouldn't have landed. Let's revert. [1] https://lore.kernel.org/r/fde7bac239f796b039b9be58b391fb77@codeaurora.org/ Fixes: 11e03d692101 ("arm64: dts: qcom: sc7280: Fixup the cpufreq node") Reported-by: Matthias Kaehlcke Cc: Sibi Sankar Cc: Matthias Kaehlcke Cc: Stephen Boyd Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210907121220.1.I08460f490473b70de0d768db45f030a4d5c17828@changeid --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 53a21d086178..fd78f16181dd 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1850,9 +1850,9 @@ cpufreq_hw: cpufreq@18591000 { compatible = "qcom,cpufreq-epss"; - reg = <0 0x18591100 0 0x900>, - <0 0x18592100 0 0x900>, - <0 0x18593100 0 0x900>; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; -- cgit v1.2.3 From 80f0a1f99983296be587325004acf72dd11eccd8 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Mon, 13 Sep 2021 12:02:56 +0200 Subject: workqueue: annotate alloc_workqueue() as printf This also enables checking of allows alloc_ordered_workqueue(). Signed-off-by: Rolf Eike Beer Signed-off-by: Tejun Heo --- include/linux/workqueue.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 2ebef6b1a3d6..74d3c1efd9bb 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -399,9 +399,8 @@ extern struct workqueue_struct *system_freezable_power_efficient_wq; * RETURNS: * Pointer to the allocated workqueue on success, %NULL on failure. */ -struct workqueue_struct *alloc_workqueue(const char *fmt, - unsigned int flags, - int max_active, ...); +__printf(1, 4) struct workqueue_struct * +alloc_workqueue(const char *fmt, unsigned int flags, int max_active, ...); /** * alloc_ordered_workqueue - allocate an ordered workqueue -- cgit v1.2.3 From 22b1255792c033781dbe42b63e28501d38032b7e Mon Sep 17 00:00:00 2001 From: Chunguang Xu Date: Mon, 13 Sep 2021 13:09:14 +0800 Subject: docs/cgroup: remove some duplicate words When I tried to add some new entries to cgroup-v2.rst, I found that the description of memory.events had some repetitive words, so I tried to delete them. Signed-off-by: Chunguang Xu Signed-off-by: Tejun Heo --- Documentation/admin-guide/cgroup-v2.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index babbe04c8d37..fc53ae0e96b9 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1226,7 +1226,7 @@ PAGE_SIZE multiple when read back. Note that all fields in this file are hierarchical and the file modified event can be generated due to an event down the - hierarchy. For for the local events at the cgroup level see + hierarchy. For the local events at the cgroup level see memory.events.local. low -- cgit v1.2.3 From b94f9ac79a7395c2d6171cc753cc27942df0be73 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Thu, 9 Sep 2021 22:42:56 -0400 Subject: cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem Since commit 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem"), cpuset_mutex has been replaced by cpuset_rwsem which is a percpu rwsem. However, the comments in kernel/cgroup/cpuset.c still reference cpuset_mutex which are now incorrect. Change all the references of cpuset_mutex to cpuset_rwsem. Fixes: 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem") Signed-off-by: Waiman Long Signed-off-by: Tejun Heo --- kernel/cgroup/cpuset.c | 56 ++++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 27 deletions(-) diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index df1ccf4558f8..2a9695ccb65f 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -311,17 +311,19 @@ static struct cpuset top_cpuset = { if (is_cpuset_online(((des_cs) = css_cs((pos_css))))) /* - * There are two global locks guarding cpuset structures - cpuset_mutex and + * There are two global locks guarding cpuset structures - cpuset_rwsem and * callback_lock. We also require taking task_lock() when dereferencing a * task's cpuset pointer. See "The task_lock() exception", at the end of this - * comment. + * comment. The cpuset code uses only cpuset_rwsem write lock. Other + * kernel subsystems can use cpuset_read_lock()/cpuset_read_unlock() to + * prevent change to cpuset structures. * * A task must hold both locks to modify cpusets. If a task holds - * cpuset_mutex, then it blocks others wanting that mutex, ensuring that it + * cpuset_rwsem, it blocks others wanting that rwsem, ensuring that it * is the only task able to also acquire callback_lock and be able to * modify cpusets. It can perform various checks on the cpuset structure * first, knowing nothing will change. It can also allocate memory while - * just holding cpuset_mutex. While it is performing these checks, various + * just holding cpuset_rwsem. While it is performing these checks, various * callback routines can briefly acquire callback_lock to query cpusets. * Once it is ready to make the changes, it takes callback_lock, blocking * everyone else. @@ -393,7 +395,7 @@ static inline bool is_in_v2_mode(void) * One way or another, we guarantee to return some non-empty subset * of cpu_online_mask. * - * Call with callback_lock or cpuset_mutex held. + * Call with callback_lock or cpuset_rwsem held. */ static void guarantee_online_cpus(struct task_struct *tsk, struct cpumask *pmask) @@ -435,7 +437,7 @@ out_unlock: * One way or another, we guarantee to return some non-empty subset * of node_states[N_MEMORY]. * - * Call with callback_lock or cpuset_mutex held. + * Call with callback_lock or cpuset_rwsem held. */ static void guarantee_online_mems(struct cpuset *cs, nodemask_t *pmask) { @@ -447,7 +449,7 @@ static void guarantee_online_mems(struct cpuset *cs, nodemask_t *pmask) /* * update task's spread flag if cpuset's page/slab spread flag is set * - * Call with callback_lock or cpuset_mutex held. + * Call with callback_lock or cpuset_rwsem held. */ static void cpuset_update_task_spread_flag(struct cpuset *cs, struct task_struct *tsk) @@ -468,7 +470,7 @@ static void cpuset_update_task_spread_flag(struct cpuset *cs, * * One cpuset is a subset of another if all its allowed CPUs and * Memory Nodes are a subset of the other, and its exclusive flags - * are only set if the other's are set. Call holding cpuset_mutex. + * are only set if the other's are set. Call holding cpuset_rwsem. */ static int is_cpuset_subset(const struct cpuset *p, const struct cpuset *q) @@ -577,7 +579,7 @@ static inline void free_cpuset(struct cpuset *cs) * If we replaced the flag and mask values of the current cpuset * (cur) with those values in the trial cpuset (trial), would * our various subset and exclusive rules still be valid? Presumes - * cpuset_mutex held. + * cpuset_rwsem held. * * 'cur' is the address of an actual, in-use cpuset. Operations * such as list traversal that depend on the actual address of the @@ -700,7 +702,7 @@ static void update_domain_attr_tree(struct sched_domain_attr *dattr, rcu_read_unlock(); } -/* Must be called with cpuset_mutex held. */ +/* Must be called with cpuset_rwsem held. */ static inline int nr_cpusets(void) { /* jump label reference count + the top-level cpuset */ @@ -726,7 +728,7 @@ static inline int nr_cpusets(void) * domains when operating in the severe memory shortage situations * that could cause allocation failures below. * - * Must be called with cpuset_mutex held. + * Must be called with cpuset_rwsem held. * * The three key local variables below are: * cp - cpuset pointer, used (together with pos_css) to perform a @@ -1005,7 +1007,7 @@ partition_and_rebuild_sched_domains(int ndoms_new, cpumask_var_t doms_new[], * 'cpus' is removed, then call this routine to rebuild the * scheduler's dynamic sched domains. * - * Call with cpuset_mutex held. Takes cpus_read_lock(). + * Call with cpuset_rwsem held. Takes cpus_read_lock(). */ static void rebuild_sched_domains_locked(void) { @@ -1078,7 +1080,7 @@ void rebuild_sched_domains(void) * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed * * Iterate through each task of @cs updating its cpus_allowed to the - * effective cpuset's. As this function is called with cpuset_mutex held, + * effective cpuset's. As this function is called with cpuset_rwsem held, * cpuset membership stays stable. */ static void update_tasks_cpumask(struct cpuset *cs) @@ -1347,7 +1349,7 @@ static int update_parent_subparts_cpumask(struct cpuset *cpuset, int cmd, * * On legacy hierarchy, effective_cpus will be the same with cpu_allowed. * - * Called with cpuset_mutex held + * Called with cpuset_rwsem held */ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp) { @@ -1704,12 +1706,12 @@ static void *cpuset_being_rebound; * @cs: the cpuset in which each task's mems_allowed mask needs to be changed * * Iterate through each task of @cs updating its mems_allowed to the - * effective cpuset's. As this function is called with cpuset_mutex held, + * effective cpuset's. As this function is called with cpuset_rwsem held, * cpuset membership stays stable. */ static void update_tasks_nodemask(struct cpuset *cs) { - static nodemask_t newmems; /* protected by cpuset_mutex */ + static nodemask_t newmems; /* protected by cpuset_rwsem */ struct css_task_iter it; struct task_struct *task; @@ -1722,7 +1724,7 @@ static void update_tasks_nodemask(struct cpuset *cs) * take while holding tasklist_lock. Forks can happen - the * mpol_dup() cpuset_being_rebound check will catch such forks, * and rebind their vma mempolicies too. Because we still hold - * the global cpuset_mutex, we know that no other rebind effort + * the global cpuset_rwsem, we know that no other rebind effort * will be contending for the global variable cpuset_being_rebound. * It's ok if we rebind the same mm twice; mpol_rebind_mm() * is idempotent. Also migrate pages in each mm to new nodes. @@ -1768,7 +1770,7 @@ static void update_tasks_nodemask(struct cpuset *cs) * * On legacy hierarchy, effective_mems will be the same with mems_allowed. * - * Called with cpuset_mutex held + * Called with cpuset_rwsem held */ static void update_nodemasks_hier(struct cpuset *cs, nodemask_t *new_mems) { @@ -1821,7 +1823,7 @@ static void update_nodemasks_hier(struct cpuset *cs, nodemask_t *new_mems) * mempolicies and if the cpuset is marked 'memory_migrate', * migrate the tasks pages to the new memory. * - * Call with cpuset_mutex held. May take callback_lock during call. + * Call with cpuset_rwsem held. May take callback_lock during call. * Will take tasklist_lock, scan tasklist for tasks in cpuset cs, * lock each such tasks mm->mmap_lock, scan its vma's and rebind * their mempolicies to the cpusets new mems_allowed. @@ -1911,7 +1913,7 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val) * @cs: the cpuset in which each task's spread flags needs to be changed * * Iterate through each task of @cs updating its spread flags. As this - * function is called with cpuset_mutex held, cpuset membership stays + * function is called with cpuset_rwsem held, cpuset membership stays * stable. */ static void update_tasks_flags(struct cpuset *cs) @@ -1931,7 +1933,7 @@ static void update_tasks_flags(struct cpuset *cs) * cs: the cpuset to update * turning_on: whether the flag is being set or cleared * - * Call with cpuset_mutex held. + * Call with cpuset_rwsem held. */ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, @@ -1980,7 +1982,7 @@ out: * cs: the cpuset to update * new_prs: new partition root state * - * Call with cpuset_mutex held. + * Call with cpuset_rwsem held. */ static int update_prstate(struct cpuset *cs, int new_prs) { @@ -2167,7 +2169,7 @@ static int fmeter_getrate(struct fmeter *fmp) static struct cpuset *cpuset_attach_old_cs; -/* Called by cgroups to determine if a cpuset is usable; cpuset_mutex held */ +/* Called by cgroups to determine if a cpuset is usable; cpuset_rwsem held */ static int cpuset_can_attach(struct cgroup_taskset *tset) { struct cgroup_subsys_state *css; @@ -2219,7 +2221,7 @@ static void cpuset_cancel_attach(struct cgroup_taskset *tset) } /* - * Protected by cpuset_mutex. cpus_attach is used only by cpuset_attach() + * Protected by cpuset_rwsem. cpus_attach is used only by cpuset_attach() * but we can't allocate it dynamically there. Define it global and * allocate from cpuset_init(). */ @@ -2227,7 +2229,7 @@ static cpumask_var_t cpus_attach; static void cpuset_attach(struct cgroup_taskset *tset) { - /* static buf protected by cpuset_mutex */ + /* static buf protected by cpuset_rwsem */ static nodemask_t cpuset_attach_nodemask_to; struct task_struct *task; struct task_struct *leader; @@ -2417,7 +2419,7 @@ static ssize_t cpuset_write_resmask(struct kernfs_open_file *of, * operation like this one can lead to a deadlock through kernfs * active_ref protection. Let's break the protection. Losing the * protection is okay as we check whether @cs is online after - * grabbing cpuset_mutex anyway. This only happens on the legacy + * grabbing cpuset_rwsem anyway. This only happens on the legacy * hierarchies. */ css_get(&cs->css); @@ -3672,7 +3674,7 @@ void __cpuset_memory_pressure_bump(void) * - Used for /proc//cpuset. * - No need to task_lock(tsk) on this tsk->cpuset reference, as it * doesn't really matter if tsk->cpuset changes after we read it, - * and we take cpuset_mutex, keeping cpuset_attach() from changing it + * and we take cpuset_rwsem, keeping cpuset_attach() from changing it * anyway. */ int proc_cpuset_show(struct seq_file *m, struct pid_namespace *ns, -- cgit v1.2.3 From c0002d11d79900f8aa5c8375336434940d6afedf Mon Sep 17 00:00:00 2001 From: ArthurChiao Date: Wed, 8 Sep 2021 16:08:15 +0800 Subject: cgroupv2, docs: fix misinformation in "device controller" section Hotmail was rejected by the mailing list, switched to gmail to resend. 1. Clarify cgroup BPF program type and attach type; 2. Fix file path broken. Signed-off-by: ArthurChiao Signed-off-by: Tejun Heo --- Documentation/admin-guide/cgroup-v2.rst | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index fc53ae0e96b9..4d8c27eca96b 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -2170,19 +2170,19 @@ existing device files. Cgroup v2 device controller has no interface files and is implemented on top of cgroup BPF. To control access to device files, a user may -create bpf programs of the BPF_CGROUP_DEVICE type and attach them -to cgroups. On an attempt to access a device file, corresponding -BPF programs will be executed, and depending on the return value -the attempt will succeed or fail with -EPERM. - -A BPF_CGROUP_DEVICE program takes a pointer to the bpf_cgroup_dev_ctx -structure, which describes the device access attempt: access type -(mknod/read/write) and device (type, major and minor numbers). -If the program returns 0, the attempt fails with -EPERM, otherwise -it succeeds. - -An example of BPF_CGROUP_DEVICE program may be found in the kernel -source tree in the tools/testing/selftests/bpf/progs/dev_cgroup.c file. +create bpf programs of type BPF_PROG_TYPE_CGROUP_DEVICE and attach +them to cgroups with BPF_CGROUP_DEVICE flag. On an attempt to access a +device file, corresponding BPF programs will be executed, and depending +on the return value the attempt will succeed or fail with -EPERM. + +A BPF_PROG_TYPE_CGROUP_DEVICE program takes a pointer to the +bpf_cgroup_dev_ctx structure, which describes the device access attempt: +access type (mknod/read/write) and device (type, major and minor numbers). +If the program returns 0, the attempt fails with -EPERM, otherwise it +succeeds. + +An example of BPF_PROG_TYPE_CGROUP_DEVICE program may be found in +tools/testing/selftests/bpf/progs/dev_cgroup.c in the kernel source tree. RDMA -- cgit v1.2.3 From 3110b942d36b961858664486d72f815d78c956c3 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 13 Sep 2021 16:25:56 -0300 Subject: IB/qib: Fix clang confusion of NULL pointer comparison clang becomes confused due to the comparison to NULL in a integer constant expression context: >> drivers/infiniband/hw/qib/qib_sysfs.c:413:1: error: static_assert expression is not an integral constant expression QIB_DIAGC_ATTR(rc_resends); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/qib/qib_sysfs.c:406:16: note: expanded from macro 'QIB_DIAGC_ATTR' static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \ Nathan found __same_type that solves this problem nicely, so use it instead. Reported-by: kernel test robot Suggested-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qib/qib_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c index 452e2355d24e..0a3b28142c05 100644 --- a/drivers/infiniband/hw/qib/qib_sysfs.c +++ b/drivers/infiniband/hw/qib/qib_sysfs.c @@ -403,7 +403,7 @@ static ssize_t diagc_attr_store(struct ib_device *ibdev, u32 port_num, } #define QIB_DIAGC_ATTR(N) \ - static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \ + static_assert(__same_type(((struct qib_ibport *)0)->rvp.n_##N, u64)); \ static struct qib_diagc_attr qib_diagc_attr_##N = { \ .attr = __ATTR(N, 0664, diagc_attr_show, diagc_attr_store), \ .counter = \ -- cgit v1.2.3 From 099dd788e31b4f426ef49c2785069804925a84e1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 13 Sep 2021 14:51:10 -0500 Subject: cifs: remove pathname for file from SPDX header checkpatch complains about source files with filenames (e.g. in these cases just below the SPDX header in comments at the top of various files in fs/cifs). It also is helpful to change this now so will be less confusing when the parent directory is renamed e.g. from fs/cifs to fs/smb_client (or fs/smbfs) Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/cache.c | 2 +- fs/cifs/cifs_debug.c | 1 - fs/cifs/cifs_fs_sb.h | 1 - fs/cifs/cifs_ioctl.h | 1 - fs/cifs/cifs_spnego.c | 2 +- fs/cifs/cifs_spnego.h | 2 +- fs/cifs/cifs_unicode.c | 1 - fs/cifs/cifsacl.c | 1 - fs/cifs/cifsacl.h | 1 - fs/cifs/cifsencrypt.c | 1 - fs/cifs/cifsfs.c | 1 - fs/cifs/cifsfs.h | 1 - fs/cifs/cifsglob.h | 1 - fs/cifs/cifspdu.h | 1 - fs/cifs/cifsproto.h | 1 - fs/cifs/cifssmb.c | 1 - fs/cifs/connect.c | 1 - fs/cifs/dir.c | 1 - fs/cifs/dns_resolve.c | 1 - fs/cifs/dns_resolve.h | 4 ++-- fs/cifs/export.c | 1 - fs/cifs/file.c | 1 - fs/cifs/fscache.c | 2 +- fs/cifs/fscache.h | 2 +- fs/cifs/inode.c | 1 - fs/cifs/ioctl.c | 1 - fs/cifs/link.c | 1 - fs/cifs/misc.c | 1 - fs/cifs/netmisc.c | 1 - fs/cifs/ntlmssp.h | 1 - fs/cifs/readdir.c | 1 - fs/cifs/rfc1002pdu.h | 1 - fs/cifs/sess.c | 1 - fs/cifs/smb2file.c | 1 - fs/cifs/smb2glob.h | 1 - fs/cifs/smb2inode.c | 1 - fs/cifs/smb2misc.c | 1 - fs/cifs/smb2pdu.c | 1 - fs/cifs/smb2pdu.h | 1 - fs/cifs/smb2proto.h | 1 - fs/cifs/smb2status.h | 1 - fs/cifs/smb2transport.c | 1 - fs/cifs/smberr.h | 1 - fs/cifs/transport.c | 1 - fs/cifs/winucase.c | 1 - fs/cifs/xattr.c | 1 - fs/smbfs_common/smbfsctl.h | 2 +- include/uapi/linux/cifs/cifs_mount.h | 1 - 48 files changed, 8 insertions(+), 49 deletions(-) diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c index 8a3b30ec860c..8be57aaedab6 100644 --- a/fs/cifs/cache.c +++ b/fs/cifs/cache.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cache.c - CIFS filesystem cache index structure definitions + * CIFS filesystem cache index structure definitions * * Copyright (c) 2010 Novell, Inc. * Authors(s): Suresh Jayaraman (sjayaraman@suse.de> diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 51a824fc926a..de2c12bcfa4b 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs_debug.c * * Copyright (C) International Business Machines Corp., 2000,2005 * diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index 4fd788586399..f97407520ea1 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_fs_sb.h * * Copyright (c) International Business Machines Corp., 2002,2004 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifs_ioctl.h b/fs/cifs/cifs_ioctl.h index ef723be358af..b87cbbe6d2d4 100644 --- a/fs/cifs/cifs_ioctl.h +++ b/fs/cifs/cifs_ioctl.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_ioctl.h * * Structure definitions for io control for cifs/smb3 * diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 8fa26a8530f8..353bd0dd7026 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifs_spnego.c -- SPNEGO upcall management for CIFS + * SPNEGO upcall management for CIFS * * Copyright (c) 2007 Red Hat, Inc. * Author(s): Jeff Layton (jlayton@redhat.com) diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h index 31387d0ea32e..e6a0451877d4 100644 --- a/fs/cifs/cifs_spnego.h +++ b/fs/cifs/cifs_spnego.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_spnego.h -- SPNEGO upcall management for CIFS + * SPNEGO upcall management for CIFS * * Copyright (c) 2007 Red Hat, Inc. * Author(s): Jeff Layton (jlayton@redhat.com) diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 171ad8b42107..e7582dd79179 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/cifs_unicode.c * * Copyright (c) International Business Machines Corp., 2000,2009 * Modified by Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 388eb536cff1..ee3aab3dd4ac 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsacl.c * * Copyright (C) International Business Machines Corp., 2007,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h index f8292bcf8594..ccbfc754bd3c 100644 --- a/fs/cifs/cifsacl.h +++ b/fs/cifs/cifsacl.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsacl.h * * Copyright (c) International Business Machines Corp., 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 2e6f40344037..d118282071b3 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsencrypt.c * * Encryption and hashing operations relating to NTLM, NTLMv2. See MS-NLMP * for more detailed information diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 8c20bfa187ac..9fa930dfd78d 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsfs.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index d25a4099b32e..b50da1901ebd 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsfs.h * * Copyright (c) International Business Machines Corp., 2002, 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index c068f7d8d879..7dd9878e26bf 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsglob.h * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 98e8e5aa0613..d2ff438fd31f 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifspdu.h * * Copyright (c) International Business Machines Corp., 2002,2009 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f9740c21ca3d..54966c1a8eb6 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsproto.h * * Copyright (c) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index a8e41c1e80ca..243d17696f06 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifssmb.c * * Copyright (C) International Business Machines Corp., 2002,2010 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0db344807ef1..399a0f084573 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/connect.c * * Copyright (C) International Business Machines Corp., 2002,2011 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 5f8a302ffcb2..6e8e7cc26ae2 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/dir.c * * vfs operations that deal with dentries * diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index 8c616aaeb7c4..0458d28d71aa 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/dns_resolve.c * * Copyright (c) 2007 Igor Mammedov * Author(s): Igor Mammedov (niallain@gmail.com) diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h index 9fa2807ef79e..afc0df381246 100644 --- a/fs/cifs/dns_resolve.h +++ b/fs/cifs/dns_resolve.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/dns_resolve.h -- DNS Resolver upcall management for CIFS DFS - * Handles host name to IP address resolution + * DNS Resolver upcall management for CIFS DFS + * Handles host name to IP address resolution * * Copyright (c) International Business Machines Corp., 2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/export.c b/fs/cifs/export.c index 747a540db954..37c28415df1e 100644 --- a/fs/cifs/export.c +++ b/fs/cifs/export.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/export.c * * Copyright (C) International Business Machines Corp., 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index d0216472f1c6..4d10c9343890 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/file.c * * vfs operations that deal with files * diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index fab47fa7df74..8eedd20c44ab 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/fscache.c - CIFS filesystem cache interface + * CIFS filesystem cache interface * * Copyright (c) 2010 Novell, Inc. * Author(s): Suresh Jayaraman diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h index 82e856b9cf89..9baa1d0f22bd 100644 --- a/fs/cifs/fscache.h +++ b/fs/cifs/fscache.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/fscache.h - CIFS filesystem cache interface definitions + * CIFS filesystem cache interface definitions * * Copyright (c) 2010 Novell, Inc. * Authors(s): Suresh Jayaraman (sjayaraman@suse.de> diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 50c01cff4c84..19af2d0ec8d5 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/inode.c * * Copyright (C) International Business Machines Corp., 2002,2010 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 42c6a0bac6c8..44ae99454fb3 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/ioctl.c * * vfs operations that deal with io control * diff --git a/fs/cifs/link.c b/fs/cifs/link.c index f0a6d63bc08c..852e54ee82c2 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/link.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 9469f1cf0b46..f4313935e734 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/misc.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c index 0e728aac67e9..fa9fbd6a819c 100644 --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/netmisc.c * * Copyright (c) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h index 378133ce8869..25a2b8ef88b9 100644 --- a/fs/cifs/ntlmssp.h +++ b/fs/cifs/ntlmssp.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/ntlmssp.h * * Copyright (c) International Business Machines Corp., 2002,2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 54d77c99e21c..1929e80c09ee 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/readdir.c * * Directory search handling * diff --git a/fs/cifs/rfc1002pdu.h b/fs/cifs/rfc1002pdu.h index 137f7c95afd6..ae1d025da294 100644 --- a/fs/cifs/rfc1002pdu.h +++ b/fs/cifs/rfc1002pdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/rfc1002pdu.h * * Protocol Data Unit definitions for RFC 1001/1002 support * diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 118403fbeda2..23e02db7923f 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/sess.c * * SMB/CIFS session setup handling routines * diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index c9d8a50062b8..f5dcc4940b6d 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2file.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Author(s): Steve French (sfrench@us.ibm.com), diff --git a/fs/cifs/smb2glob.h b/fs/cifs/smb2glob.h index d0e9f3782bd9..ca692b2283cd 100644 --- a/fs/cifs/smb2glob.h +++ b/fs/cifs/smb2glob.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2glob.h * * Definitions for various global variables and structures * diff --git a/fs/cifs/smb2inode.c b/fs/cifs/smb2inode.c index 957b2594f02e..8297703492ee 100644 --- a/fs/cifs/smb2inode.c +++ b/fs/cifs/smb2inode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2inode.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index 668f77108831..29b5554f6263 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2misc.c * * Copyright (C) International Business Machines Corp., 2002,2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index b6d2e3591927..672ae78e866a 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2pdu.c * * Copyright (C) International Business Machines Corp., 2009, 2013 * Etersoft, 2012 diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index e9cac7970b66..f32c99c9ba13 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2pdu.h * * Copyright (c) International Business Machines Corp., 2009, 2013 * Etersoft, 2012 diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index 263767f644f8..547945443fa7 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2proto.h * * Copyright (c) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2status.h b/fs/cifs/smb2status.h index 0215ef36e240..a9e958166fc5 100644 --- a/fs/cifs/smb2status.h +++ b/fs/cifs/smb2status.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2status.h * * SMB2 Status code (network error) definitions * Definitions are from MS-ERREF diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 6f7952ea4941..f59b956f9d25 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2transport.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h index 60189efb3236..aeffdad829e2 100644 --- a/fs/cifs/smberr.h +++ b/fs/cifs/smberr.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smberr.h * * Copyright (c) International Business Machines Corp., 2002,2004 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 75a95de320cf..b7379329b741 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/transport.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/winucase.c b/fs/cifs/winucase.c index 59b6c577aa0a..2f075b5b50df 100644 --- a/fs/cifs/winucase.c +++ b/fs/cifs/winucase.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/winucase.c * * Copyright (c) Jeffrey Layton , 2013 * diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 9ed481e79ce0..7d8b72d67c80 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/xattr.c * * Copyright (c) International Business Machines Corp., 2003, 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/smbfs_common/smbfsctl.h b/fs/smbfs_common/smbfsctl.h index d01e8c9d7a31..926f87cd6af0 100644 --- a/fs/smbfs_common/smbfsctl.h +++ b/fs/smbfs_common/smbfsctl.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1+ */ /* - * fs/cifs/smbfsctl.h: SMB, CIFS, SMB2 FSCTL definitions + * SMB, CIFS, SMB2 FSCTL definitions * * Copyright (c) International Business Machines Corp., 2002,2013 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/include/uapi/linux/cifs/cifs_mount.h b/include/uapi/linux/cifs/cifs_mount.h index 69829205fdb5..8e87d27b0951 100644 --- a/include/uapi/linux/cifs/cifs_mount.h +++ b/include/uapi/linux/cifs/cifs_mount.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * include/uapi/linux/cifs/cifs_mount.h * * Author(s): Scott Lovenberg (scott.lovenberg@gmail.com) * -- cgit v1.2.3 From 7bbc3d385bd813077acaf0e6fdb2a86a901f5382 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 6 Sep 2021 18:26:34 +0200 Subject: netfilter: ipset: Fix oversized kvmalloc() calls The commit commit 7661809d493b426e979f39ab512e3adf41fbcc69 Author: Linus Torvalds Date: Wed Jul 14 09:45:49 2021 -0700 mm: don't allow oversized kvmalloc() calls limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the same limit in ipset. Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_gen.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index 6186358eac7c..6e391308431d 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -130,11 +130,11 @@ htable_size(u8 hbits) { size_t hsize; - /* We must fit both into u32 in jhash and size_t */ + /* We must fit both into u32 in jhash and INT_MAX in kvmalloc_node() */ if (hbits > 31) return 0; hsize = jhash_size(hbits); - if ((((size_t)-1) - sizeof(struct htable)) / sizeof(struct hbucket *) + if ((INT_MAX - sizeof(struct htable)) / sizeof(struct hbucket *) < hsize) return 0; -- cgit v1.2.3 From 69e73dbfda14fbfe748d3812da1244cce2928dcb Mon Sep 17 00:00:00 2001 From: Andrea Claudi Date: Fri, 10 Sep 2021 18:08:39 +0200 Subject: ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 ip_vs_conn_tab_bits may be provided by the user through the conn_tab_bits module parameter. If this value is greater than 31, or less than 0, the shift operator used to derive tab_size causes undefined behaviour. Fix this checking ip_vs_conn_tab_bits value to be in the range specified in ipvs Kconfig. If not, simply use default value. Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size") Reported-by: Yi Chen Signed-off-by: Andrea Claudi Acked-by: Julian Anastasov Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_conn.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index c100c6b112c8..2c467c422dc6 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -1468,6 +1468,10 @@ int __init ip_vs_conn_init(void) int idx; /* Compute size and mask */ + if (ip_vs_conn_tab_bits < 8 || ip_vs_conn_tab_bits > 20) { + pr_info("conn_tab_bits not in [8, 20]. Using default value\n"); + ip_vs_conn_tab_bits = CONFIG_IP_VS_TAB_BITS; + } ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits; ip_vs_conn_tab_mask = ip_vs_conn_tab_size - 1; -- cgit v1.2.3 From 4c51de1e8f928a5b05248714d832d7d991ac319a Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 13 Sep 2021 18:29:46 -0500 Subject: cifs: fix incorrect kernel doc comments Correct kernel-doc comments pointed out by the automated kernel test robot. Reported-by: kernel test robot Signed-off-by: Steve French --- fs/cifs/connect.c | 12 ++++++++++-- fs/cifs/ioctl.c | 2 +- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 399a0f084573..7881115cfbee 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1089,7 +1089,7 @@ next_pdu: module_put_and_exit(0); } -/** +/* * Returns true if srcaddr isn't specified and rhs isn't specified, or * if srcaddr is specified and matches the IP address of the rhs argument */ @@ -1549,6 +1549,9 @@ static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx) /** * cifs_setup_ipc - helper to setup the IPC tcon for the session + * @ses: smb session to issue the request on + * @ctx: the superblock configuration context to use for building the + * new tree connection for the IPC (interprocess communication RPC) * * A new IPC connection is made and stored in the session * tcon_ipc. The IPC tcon has the same lifetime as the session. @@ -1604,6 +1607,7 @@ out: /** * cifs_free_ipc - helper to release the session IPC tcon + * @ses: smb session to unmount the IPC from * * Needs to be called everytime a session is destroyed. * @@ -1854,6 +1858,8 @@ cifs_set_cifscreds(struct smb3_fs_context *ctx __attribute__((unused)), /** * cifs_get_smb_ses - get a session matching @ctx data from @server + * @server: server to setup the session to + * @ctx: superblock configuration context to use to setup the session * * This function assumes it is being called from cifs_mount() where we * already got a server reference (server refcount +1). See @@ -2064,6 +2070,8 @@ cifs_put_tcon(struct cifs_tcon *tcon) /** * cifs_get_tcon - get a tcon matching @ctx data from @ses + * @ses: smb session to issue the request on + * @ctx: the superblock configuration context to use for building the * * - tcon refcount is the number of mount points using the tcon. * - ses refcount is the number of tcon using the session. @@ -3029,7 +3037,7 @@ build_unc_path_to_root(const struct smb3_fs_context *ctx, return full_path; } -/** +/* * expand_dfs_referral - Perform a dfs referral query and update the cifs_sb * * If a referral is found, cifs_sb->ctx->mount_options will be (re-)allocated diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 44ae99454fb3..0359b604bdbc 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -358,7 +358,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) if (pSMBFile == NULL) break; tcon = tlink_tcon(pSMBFile->tlink); - caps = le64_to_cpu(tcon->fsUnixInfo.Capability); + /* caps = le64_to_cpu(tcon->fsUnixInfo.Capability); */ if (get_user(ExtAttrBits, (int __user *)arg)) { rc = -EFAULT; -- cgit v1.2.3 From 6a2ea0d34af1ca807d5ba6a8350a037ff3cd35cc Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 17 Aug 2021 16:55:31 -0700 Subject: scsi: st: Add missing break in switch statement in st_ioctl() Clang + -Wimplicit-fallthrough warns: drivers/scsi/st.c:3831:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/scsi/st.c:3831:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's -Wimplicit-fallthrough is a little bit more pedantic than GCC's, requiring every case block to end in break, return, or fallthrough, rather than allowing implicit fallthroughs to cases that just contain break or return. Add a break so that there is no more warning, as has been done all over the tree already. Link: https://lore.kernel.org/r/20210817235531.172995-1-nathan@kernel.org Fixes: 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()") Reviewed-by: Gustavo A. R. Silva Signed-off-by: Nathan Chancellor Signed-off-by: Martin K. Petersen --- drivers/scsi/st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9d04929f03a1..ae8636d3780b 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3823,6 +3823,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg) case CDROM_SEND_PACKET: if (!capable(CAP_SYS_RAWIO)) return -EPERM; + break; default: break; } -- cgit v1.2.3 From 96fafe7c6523886308605d30ec92c7936abe7c2c Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 30 Aug 2021 16:10:50 -0700 Subject: scsi: elx: efct: Fix void-pointer-to-enum-cast warning for efc_nport_topology The kernel test robot flagged an warning for ".../efc_device.c:932:6: warning: cast to smaller integer type 'enum efc_nport_topology' from 'void *'" For the topology events, the "arg" field is generically defined as a void * and is used to pass different arguments. Most of the arguments are pointers to data structures. But for the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event, the argument is an enum value, and the code is typecasting the void * to an enum generating the warning. Fix by converting the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event to pass a pointer to the enum, thus it's a straight-forward pointer dereference in the event handler. Link: https://lore.kernel.org/r/20210830231050.5951-1-jsmart2021@gmail.com Fixes: 202bfdffae27 ("scsi: elx: libefc: FC node ELS and state handling") Reported-by: kernel test robot Co-developed-by: Ram Vegesna Signed-off-by: Ram Vegesna Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/elx/libefc/efc_device.c | 7 +++---- drivers/scsi/elx/libefc/efc_fabric.c | 3 +-- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/elx/libefc/efc_device.c b/drivers/scsi/elx/libefc/efc_device.c index 725ca2a23fb2..52be01333c6e 100644 --- a/drivers/scsi/elx/libefc/efc_device.c +++ b/drivers/scsi/elx/libefc/efc_device.c @@ -928,22 +928,21 @@ __efc_d_wait_topology_notify(struct efc_sm_ctx *ctx, break; case EFC_EVT_NPORT_TOPOLOGY_NOTIFY: { - enum efc_nport_topology topology = - (enum efc_nport_topology)arg; + enum efc_nport_topology *topology = arg; WARN_ON(node->nport->domain->attached); WARN_ON(node->send_ls_acc != EFC_NODE_SEND_LS_ACC_PLOGI); node_printf(node, "topology notification, topology=%d\n", - topology); + *topology); /* At the time the PLOGI was received, the topology was unknown, * so we didn't know which node would perform the domain attach: * 1. The node from which the PLOGI was sent (p2p) or * 2. The node to which the FLOGI was sent (fabric). */ - if (topology == EFC_NPORT_TOPO_P2P) { + if (*topology == EFC_NPORT_TOPO_P2P) { /* if this is p2p, need to attach to the domain using * the d_id from the PLOGI received */ diff --git a/drivers/scsi/elx/libefc/efc_fabric.c b/drivers/scsi/elx/libefc/efc_fabric.c index d397220d9e54..3270ce40196c 100644 --- a/drivers/scsi/elx/libefc/efc_fabric.c +++ b/drivers/scsi/elx/libefc/efc_fabric.c @@ -107,7 +107,6 @@ void efc_fabric_notify_topology(struct efc_node *node) { struct efc_node *tmp_node; - enum efc_nport_topology topology = node->nport->topology; unsigned long index; /* @@ -118,7 +117,7 @@ efc_fabric_notify_topology(struct efc_node *node) if (tmp_node != node) { efc_node_post_event(tmp_node, EFC_EVT_NPORT_TOPOLOGY_NOTIFY, - (void *)topology); + &node->nport->topology); } } } -- cgit v1.2.3 From 59936430e6a6acb0ef943e9306506b2e9c2e45a8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 30 Aug 2021 16:12:43 -0700 Subject: scsi: lpfc: Fix CPU to/from endian warnings introduced by ELS processing The kernel test robot reported the following sparse warning: ".../lpfc_els.c:3984:25: sparse: sparse: cast from restricted __be16" For the error being flagged, using be32_to_cpu() on a be16 data type, it was simple enough. But a review of other elements and warnings were also evaluated. This patch corrected several items in the original patch: - Using be32_to_cpu() on a be16 data type - cpu_to_le32() used on a std uint32_t (CPU) data type. Note: This is a byte array, but stored in LE layout by hardware at 32-bit boundaries. So it possibly needed conversion. - Using cpu_to_le32() on a std uint16_t and assigned to a char typeA - Using le32_to_cpu() on a le16 type - Missing cpu_to_le16() on an assignment Link: https://lore.kernel.org/r/20210830231243.6227-1-jsmart2021@gmail.com Fixes: 9064aeb2df8e ("scsi: lpfc: Add EDC ELS support") Reported-by: kernel test robot Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 8 ++++---- drivers/scsi/lpfc/lpfc_hw4.h | 2 +- drivers/scsi/lpfc/lpfc_init.c | 16 ++++++++-------- drivers/scsi/lpfc/lpfc_sli.c | 5 +++-- 4 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 1254a575fd47..f3fc79b99165 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4015,11 +4015,11 @@ lpfc_cmpl_els_edc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, be32_to_cpu(pcgd->desc_tag), be32_to_cpu(pcgd->desc_len), be32_to_cpu(pcgd->xmt_signal_capability), - be32_to_cpu(pcgd->xmt_signal_frequency.count), - be32_to_cpu(pcgd->xmt_signal_frequency.units), + be16_to_cpu(pcgd->xmt_signal_frequency.count), + be16_to_cpu(pcgd->xmt_signal_frequency.units), be32_to_cpu(pcgd->rcv_signal_capability), - be32_to_cpu(pcgd->rcv_signal_frequency.count), - be32_to_cpu(pcgd->rcv_signal_frequency.units)); + be16_to_cpu(pcgd->rcv_signal_frequency.count), + be16_to_cpu(pcgd->rcv_signal_frequency.units)); /* Compare driver and Fport capabilities and choose * least common. diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 79a4872c2edb..7359505e6041 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1167,7 +1167,7 @@ struct lpfc_mbx_read_object { /* Version 0 */ #define lpfc_mbx_rd_object_rlen_MASK 0x00FFFFFF #define lpfc_mbx_rd_object_rlen_WORD word0 uint32_t rd_object_offset; - uint32_t rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW]; + __le32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW]; #define LPFC_OBJ_NAME_SZ 104 /* 26 x sizeof(uint32_t) is 104. */ uint32_t rd_object_cnt; struct lpfc_mbx_host_buf rd_object_hbuf[4]; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 0ec322f0e3cb..597e5a1ef060 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5518,7 +5518,7 @@ lpfc_cgn_update_stat(struct lpfc_hba *phba, uint32_t dtag) if (phba->cgn_fpin_frequency && phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; - cp->cgn_stat_npm = cpu_to_le32(value); + cp->cgn_stat_npm = value; } value = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); @@ -5547,9 +5547,9 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) uint32_t mbps; uint32_t dvalue, wvalue, lvalue, avalue; uint64_t latsum; - uint16_t *ptr; - uint32_t *lptr; - uint16_t *mptr; + __le16 *ptr; + __le32 *lptr; + __le16 *mptr; /* Make sure we have a congestion info buffer */ if (!phba->cgn_i) @@ -5570,7 +5570,7 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) if (phba->cgn_fpin_frequency && phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; - cp->cgn_stat_npm = cpu_to_le32(value); + cp->cgn_stat_npm = value; } /* Read and clear the latency counters for this minute */ @@ -5753,7 +5753,7 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) dvalue += le32_to_cpu(cp->cgn_drvr_hr[i]); wvalue += le32_to_cpu(cp->cgn_warn_hr[i]); lvalue += le32_to_cpu(cp->cgn_latency_hr[i]); - mbps += le32_to_cpu(cp->cgn_bw_hr[i]); + mbps += le16_to_cpu(cp->cgn_bw_hr[i]); avalue += le32_to_cpu(cp->cgn_alarm_hr[i]); } if (lvalue) /* Avg of latency averages */ @@ -13411,8 +13411,8 @@ lpfc_init_congestion_buf(struct lpfc_hba *phba) /* last used Index initialized to 0xff already */ - cp->cgn_warn_freq = LPFC_FPIN_INIT_FREQ; - cp->cgn_alarm_freq = LPFC_FPIN_INIT_FREQ; + cp->cgn_warn_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); + cp->cgn_alarm_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); cp->cgn_info_crc = cpu_to_le32(crc); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index ffd8a140638c..78ce38d7251c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -22090,6 +22090,7 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; struct lpfc_dmabuf *pcmd; + u32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW] = {0}; /* sanity check on queue memory */ if (!datap) @@ -22113,10 +22114,10 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, memset((void *)read_object->u.request.rd_object_name, 0, LPFC_OBJ_NAME_SZ); - sprintf((uint8_t *)read_object->u.request.rd_object_name, rdobject); + scnprintf((char *)rd_object_name, sizeof(rd_object_name), rdobject); for (j = 0; j < strlen(rdobject); j++) read_object->u.request.rd_object_name[j] = - cpu_to_le32(read_object->u.request.rd_object_name[j]); + cpu_to_le32(rd_object_name[j]); pcmd = kmalloc(sizeof(*pcmd), GFP_KERNEL); if (pcmd) -- cgit v1.2.3 From 37e384095f20cca728500fe5344cd308aa6fd7ff Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 7 Sep 2021 22:09:27 -0700 Subject: scsi: lpfc: Fix compilation errors on kernels with no CONFIG_DEBUG_FS The Kernel test robot flagged the following warning: ".../lpfc_init.c:7788:35: error: 'struct lpfc_sli4_hba' has no member named 'c_stat'" Reviewing this issue highlighted that one of the recent patches caused the driver to no longer compile cleanly if CONFIG_DEBUG_FS is not set. Correct the different areas that are failing to compile. Link: https://lore.kernel.org/r/20210908050927.37275-1-jsmart2021@gmail.com Fixes: 02243836ad6f ("scsi: lpfc: Add support for the CM framework") Reviewed-by: Nathan Chancellor Build-tested-by: Nathan Chancellor Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 4 ++-- drivers/scsi/lpfc/lpfc_nvme.c | 2 -- drivers/scsi/lpfc/lpfc_scsi.c | 6 +----- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 597e5a1ef060..195169badb37 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8277,11 +8277,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) return 0; out_free_hba_hdwq_info: - free_percpu(phba->sli4_hba.c_stat); #ifdef CONFIG_SCSI_LPFC_DEBUG_FS + free_percpu(phba->sli4_hba.c_stat); out_free_hba_idle_stat: - kfree(phba->sli4_hba.idle_stat); #endif + kfree(phba->sli4_hba.idle_stat); out_free_hba_eq_info: free_percpu(phba->sli4_hba.eq_info); out_free_hba_cpu_map: diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index 73a3568ff17e..479b3eed6208 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -1489,9 +1489,7 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport, struct lpfc_nvme_qhandle *lpfc_queue_info; struct lpfc_nvme_fcpreq_priv *freqpriv; struct nvme_common_command *sqe; -#ifdef CONFIG_SCSI_LPFC_DEBUG_FS uint64_t start = 0; -#endif /* Validate pointers. LLDD fault handling with transport does * have timing races. diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0fde1e874c7a..63d8ac9f68a7 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -5578,12 +5578,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); int err, idx; u8 *uuid = NULL; -#ifdef CONFIG_SCSI_LPFC_DEBUG_FS - uint64_t start = 0L; + uint64_t start; - if (phba->ktime_on) - start = ktime_get_ns(); -#endif start = ktime_get_ns(); rdata = lpfc_rport_data_from_scsi_device(cmnd->device); -- cgit v1.2.3 From 5d1e15108b8d058d537f19cdef4170d2ae4eed08 Mon Sep 17 00:00:00 2001 From: Chi Minghao Date: Tue, 31 Aug 2021 04:40:58 -0700 Subject: scsi: lpfc: Remove unneeded variable Fix the following coccicheck REVIEW: ./drivers/scsi/lpfc/lpfc_scsi.c:1498:9-12 REVIEW Unneeded variable Link: https://lore.kernel.org/r/20210831114058.17817-1-lv.ruyi@zte.com.cn Reported-by: Zeal Robot Reviewed-by: James Smart Signed-off-by: Chi Minghao Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_scsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 63d8ac9f68a7..befdf864c43b 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1495,7 +1495,6 @@ static int lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, uint8_t *txop, uint8_t *rxop) { - uint8_t ret = 0; if (sc->prot_flags & SCSI_PROT_IP_CHECKSUM) { switch (scsi_get_prot_op(sc)) { @@ -1548,7 +1547,7 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, } } - return ret; + return 0; } #endif -- cgit v1.2.3 From 65ef27f7798b57138351d28fd2f61f2afa164400 Mon Sep 17 00:00:00 2001 From: ChanWoo Lee Date: Wed, 1 Sep 2021 11:56:17 +0900 Subject: scsi: ufs: ufshpb: Remove unused parameters The following parameters are not used in the function. Remove them. *func(): ufshpb_set_hpb_read_to_upiu -> struct ufshpb_lu *hpb -> u32 lpn Link: https://lore.kernel.org/r/20210901025617.31174-1-cw9316.lee@samsung.com Reviewed-by: Daejun Park Reviewed-by: Bart Van Assche Signed-off-by: ChanWoo Lee Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshpb.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c index 02fb51ae8b25..589af5f6b940 100644 --- a/drivers/scsi/ufs/ufshpb.c +++ b/drivers/scsi/ufs/ufshpb.c @@ -333,9 +333,8 @@ ufshpb_get_pos_from_lpn(struct ufshpb_lu *hpb, unsigned long lpn, int *rgn_idx, } static void -ufshpb_set_hpb_read_to_upiu(struct ufs_hba *hba, struct ufshpb_lu *hpb, - struct ufshcd_lrb *lrbp, u32 lpn, __be64 ppn, - u8 transfer_len, int read_id) +ufshpb_set_hpb_read_to_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, + __be64 ppn, u8 transfer_len, int read_id) { unsigned char *cdb = lrbp->cmd->cmnd; __be64 ppn_tmp = ppn; @@ -703,8 +702,7 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) } } - ufshpb_set_hpb_read_to_upiu(hba, hpb, lrbp, lpn, ppn, transfer_len, - read_id); + ufshpb_set_hpb_read_to_upiu(hba, lrbp, ppn, transfer_len, read_id); hpb->stats.hit_cnt++; return 0; -- cgit v1.2.3 From 4e28550829258f7dab97383acaa477bd724c0ff4 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Wed, 1 Sep 2021 16:53:36 +0800 Subject: scsi: iscsi: Adjust iface sysfs attr detection ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan Signed-off-by: Baokun Li Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index d8b05d8b5470..922e4c7bd88e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -441,9 +441,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, struct iscsi_transport *t = iface->transport; int param = -1; - if (attr == &dev_attr_iface_enabled.attr) - param = ISCSI_NET_PARAM_IFACE_ENABLE; - else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) + if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO; else if (attr == &dev_attr_iface_header_digest.attr) param = ISCSI_IFACE_PARAM_HDRDGST_EN; @@ -483,7 +481,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, if (param != -1) return t->attr_is_visible(ISCSI_IFACE_PARAM, param); - if (attr == &dev_attr_iface_vlan_id.attr) + if (attr == &dev_attr_iface_enabled.attr) + param = ISCSI_NET_PARAM_IFACE_ENABLE; + else if (attr == &dev_attr_iface_vlan_id.attr) param = ISCSI_NET_PARAM_VLAN_ID; else if (attr == &dev_attr_iface_vlan_priority.attr) param = ISCSI_NET_PARAM_VLAN_PRIORITY; -- cgit v1.2.3 From e4953a93104c1fb1ef7989541f9867cc276467f9 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Wed, 1 Sep 2021 20:55:42 +0530 Subject: scsi: mpt3sas: Call cpu_relax() before calling udelay() Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.com Reviewed-by: Bart Van Assche Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 6c82435bc9cc..27eb652b564f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1582,8 +1582,10 @@ mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) * wait for current poll to complete. */ for (qid = 0; qid < iopoll_q_count; qid++) { - while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) { + cpu_relax(); udelay(500); + } } } -- cgit v1.2.3 From 265dfe8ebbabae7959060bd1c3f75c2473b697ed Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 6 Sep 2021 17:01:12 +0800 Subject: scsi: sd: Free scsi_disk device via put_device() After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index cbd9999f93a6..a8039beb5a02 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3401,15 +3401,16 @@ static int sd_probe(struct device *dev) } device_initialize(&sdkp->dev); - sdkp->dev.parent = dev; + sdkp->dev.parent = get_device(dev); sdkp->dev.class = &sd_disk_class; dev_set_name(&sdkp->dev, "%s", dev_name(dev)); error = device_add(&sdkp->dev); - if (error) - goto out_free_index; + if (error) { + put_device(&sdkp->dev); + goto out; + } - get_device(dev); dev_set_drvdata(dev, sdkp); gd->major = sd_major((index & 0xf0) >> 4); -- cgit v1.2.3 From 7215e909814fed7cda33c954943a4050d8348204 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Mon, 6 Sep 2021 23:06:42 +0900 Subject: scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE Reporting zones on a SCSI device sometimes fail with the following error: [76248.516390] ata16.00: invalid transfer count 131328 [76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates that buffer size is not aligned to SECTOR_SIZE. This happens when the __vmalloc() failed. Consider we are reporting 4096 zones, then we will have "bufsize = roundup((4096 + 1) * 64, SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves the bufsize to 131328, which is no longer aligned to SECTOR_SIZE. Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix the comment as well. Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com Fixes: 23a50861adda ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()") Cc: stable@vger.kernel.org # 5.5+ Reviewed-by: Johannes Thumshirn Reviewed-by: Damien Le Moal Reviewed-by: Himanshu Madhani Signed-off-by: Naohiro Aota Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index b9757f24b0d6..8197d31a81f9 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -154,8 +154,8 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, /* * Report zone buffer size should be at most 64B times the number of - * zones requested plus the 64B reply header, but should be at least - * SECTOR_SIZE for ATA devices. + * zones requested plus the 64B reply header, but should be aligned + * to SECTOR_SIZE for ATA devices. * Make sure that this size does not exceed the hardware capabilities. * Furthermore, since the report zone command cannot be split, make * sure that the allocated buffer can always be mapped by limiting the @@ -174,7 +174,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, *buflen = bufsize; return buf; } - bufsize >>= 1; + bufsize = rounddown(bufsize >> 1, SECTOR_SIZE); } return NULL; -- cgit v1.2.3 From ef7ae7f746e95c6fa4ec2bcfacb949c36263da78 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Mon, 6 Sep 2021 17:18:09 +0200 Subject: scsi: target: Fix the pgr/alua_support_store functions Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com Reviewed-by: Bodo Stroesser Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen --- drivers/target/target_core_configfs.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 102ec644bc8a..023bd4516a68 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -1110,20 +1110,24 @@ static ssize_t alua_support_store(struct config_item *item, { struct se_dev_attrib *da = to_attrib(item); struct se_device *dev = da->da_dev; - bool flag; + bool flag, oldflag; int ret; + ret = strtobool(page, &flag); + if (ret < 0) + return ret; + + oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_ALUA); + if (flag == oldflag) + return count; + if (!(dev->transport->transport_flags_changeable & TRANSPORT_FLAG_PASSTHROUGH_ALUA)) { pr_err("dev[%p]: Unable to change SE Device alua_support:" " alua_support has fixed value\n", dev); - return -EINVAL; + return -ENOSYS; } - ret = strtobool(page, &flag); - if (ret < 0) - return ret; - if (flag) dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_ALUA; else @@ -1145,20 +1149,24 @@ static ssize_t pgr_support_store(struct config_item *item, { struct se_dev_attrib *da = to_attrib(item); struct se_device *dev = da->da_dev; - bool flag; + bool flag, oldflag; int ret; + ret = strtobool(page, &flag); + if (ret < 0) + return ret; + + oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR); + if (flag == oldflag) + return count; + if (!(dev->transport->transport_flags_changeable & TRANSPORT_FLAG_PASSTHROUGH_PGR)) { pr_err("dev[%p]: Unable to change SE Device pgr_support:" " pgr_support has fixed value\n", dev); - return -EINVAL; + return -ENOSYS; } - ret = strtobool(page, &flag); - if (ret < 0) - return ret; - if (flag) dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_PGR; else -- cgit v1.2.3 From 450907424d9ebcc28fab42a065c3cddce49ee97d Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 7 Sep 2021 09:52:25 -0700 Subject: scsi: elx: efct: Do not hold lock while calling fc_vport_terminate() Smatch checker reported the following error: drivers/base/power/sysfs.c:833 dpm_sysfs_remove() warn: sleeping in atomic context With a calling sequence of: efct_lio_npiv_drop_nport() <- disables preempt -> fc_vport_terminate() -> device_del() -> dpm_sysfs_remove() Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call while holding a lock w/ ipl raised. It is unnecessary to hold the lock over this call, shift where the lock is taken. Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.com Reported-by: Dan Carpenter Co-developed-by: Ram Vegesna Signed-off-by: Ram Vegesna Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/elx/efct/efct_lio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/elx/efct/efct_lio.c b/drivers/scsi/elx/efct/efct_lio.c index bb3b460dc0bc..4d73e92909ab 100644 --- a/drivers/scsi/elx/efct/efct_lio.c +++ b/drivers/scsi/elx/efct/efct_lio.c @@ -880,11 +880,11 @@ efct_lio_npiv_drop_nport(struct se_wwn *wwn) struct efct *efct = lio_vport->efct; unsigned long flags = 0; - spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); - if (lio_vport->fc_vport) fc_vport_terminate(lio_vport->fc_vport); + spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); + list_for_each_entry_safe(vport, next_vport, &efct->tgt_efct.vport_list, list_entry) { if (vport->lio_vport == lio_vport) { -- cgit v1.2.3 From 1f97c29beee774e407839768439b7f51831c3ea1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 7 Sep 2021 23:00:44 +0200 Subject: scsi: ncr53c8xx: Remove unused retrieve_from_waiting_list() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drop retrieve_from_waiting_list() to avoid this warning: drivers/scsi/ncr53c8xx.c:8000:26: warning: ‘retrieve_from_waiting_list’ defined but not used [-Wunused-function] Link: https://lore.kernel.org/r/YTfS/LH5vCN6afDW@ls3530 Fixes: 1c22e327545c ("scsi: ncr53c8xx: Remove unused code") Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Helge Deller Signed-off-by: Martin K. Petersen --- drivers/scsi/ncr53c8xx.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 7a4f5d4dd670..2b8c6fa5e775 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -1939,11 +1939,8 @@ static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn); static void ncr_put_start_queue(struct ncb *np, struct ccb *cp); static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd); -static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd); static void process_waiting_list(struct ncb *np, int sts); -#define remove_from_waiting_list(np, cmd) \ - retrieve_from_waiting_list(1, (np), (cmd)) #define requeue_waiting_list(np) process_waiting_list((np), DID_OK) #define reset_waiting_list(np) process_waiting_list((np), DID_RESET) @@ -7997,26 +7994,6 @@ static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd) } } -static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd) -{ - struct scsi_cmnd **pcmd = &np->waiting_list; - - while (*pcmd) { - if (cmd == *pcmd) { - if (to_remove) { - *pcmd = (struct scsi_cmnd *) cmd->next_wcmd; - cmd->next_wcmd = NULL; - } -#ifdef DEBUG_WAITING_LIST - printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd); -#endif - return cmd; - } - pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd; - } - return NULL; -} - static void process_waiting_list(struct ncb *np, int sts) { struct scsi_cmnd *waiting_list, *wcmd; -- cgit v1.2.3 From 17dfd54d391ea9f8d136fb137962987cb2c6444c Mon Sep 17 00:00:00 2001 From: jing yangyang Date: Thu, 19 Aug 2021 20:08:05 -0700 Subject: scsi: megaraid: Fix Coccinelle warning WARNING !A || A && B is equivalent to !A || B This issue was detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20210820030805.12383-1-jing.yangyang@zte.com.cn Reported-by: Zeal Robot Acked-by: Sumit Saxena Signed-off-by: jing yangyang Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index e4298bf4a482..17c87ac8bb51 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -8773,8 +8773,7 @@ int megasas_update_device_list(struct megasas_instance *instance, if (event_type & SCAN_VD_CHANNEL) { if (!instance->requestorId || - (instance->requestorId && - megasas_get_ld_vf_affiliation(instance, 0))) { + megasas_get_ld_vf_affiliation(instance, 0)) { dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST); if (dcmd_ret != DCMD_SUCCESS) -- cgit v1.2.3 From fc13fc07490982c89f5d9d8d671ec29a39cddc85 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 3 Sep 2021 08:11:39 -0600 Subject: scsi: Remove SCSI CDROM MAINTAINERS entry There's little point in keeping this one separately maintained these days, so just remove the entry and it'll fall under the SCSI subsystem where it belongs. Link: https://lore.kernel.org/r/c5e12bd1-10de-634c-d6b3-dac79ed01af5@kernel.dk Signed-off-by: Jens Axboe Signed-off-by: Martin K. Petersen --- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..fd12a39f92ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16650,13 +16650,6 @@ M: Lubomir Rintel S: Supported F: drivers/char/pcmcia/scr24x_cs.c -SCSI CDROM DRIVER -M: Jens Axboe -L: linux-scsi@vger.kernel.org -S: Maintained -W: http://www.kernel.dk -F: drivers/scsi/sr* - SCSI RDMA PROTOCOL (SRP) INITIATOR M: Bart Van Assche L: linux-rdma@vger.kernel.org -- cgit v1.2.3 From e699a4e1d37314eb842ba9de19a7ccee7f75da10 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 26 Aug 2021 12:57:14 +0100 Subject: scsi: sr: Fix spelling mistake "does'nt" -> "doesn't" There is a spelling mistake in a literal string. Fix it. Link: https://lore.kernel.org/r/20210826115714.11844-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/sr_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 79d9aa2df528..ddd00efc4882 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -523,7 +523,7 @@ static int sr_read_sector(Scsi_CD *cd, int lba, int blksize, unsigned char *dest return rc; cd->readcd_known = 0; sr_printk(KERN_INFO, cd, - "CDROM does'nt support READ CD (0xbe) command\n"); + "CDROM doesn't support READ CD (0xbe) command\n"); /* fall & retry the other way */ } /* ... if this fails, we switch the blocksize using MODE SELECT */ -- cgit v1.2.3 From 655a68b2203e44912afe462dff9d83d68ac88333 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 23:36:43 +0100 Subject: scsi: megaraid: Clean up some inconsistent indenting There are a few statements where the indentation is not correct, clean these up. Link: https://lore.kernel.org/r/20210902223643.56979-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 17c87ac8bb51..39d8754e63ac 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1916,7 +1916,7 @@ void megasas_set_dynamic_target_properties(struct scsi_device *sdev, raid = MR_LdRaidGet(ld, local_map_ptr); if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) - blk_queue_update_dma_alignment(sdev->request_queue, 0x7); + blk_queue_update_dma_alignment(sdev->request_queue, 0x7); mr_device_priv_data->is_tm_capable = raid->capability.tmCapable; @@ -8033,7 +8033,7 @@ skip_firing_dcmds: if (instance->adapter_type != MFI_SERIES) { megasas_release_fusion(instance); - pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + + pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)); for (i = 0; i < 2 ; i++) { -- cgit v1.2.3 From 04c260bdaeede8c703bddc21099e4da96f2909e2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 23:42:15 +0100 Subject: scsi: mpt3sas: Clean up some inconsistent indenting There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 770b241d7bb2..1b79f01f03a4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -2178,7 +2178,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, mpt3sas_check_cmd_timeout(ioc, ioc->ctl_cmds.status, mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed); - *issue_reset = reset_needed; + *issue_reset = reset_needed; rc = -EFAULT; goto out; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 2f82b1e629af..d383d4a03436 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -10749,8 +10749,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: _scsih_pcie_topology_change_event(ioc, fw_event); ioc->current_event = NULL; - return; - break; + return; } out: fw_event_work_put(fw_event); -- cgit v1.2.3 From 1cbc9ad3eecd492be33b727b4606ae75bc880676 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 31 Aug 2021 17:53:17 +0300 Subject: scsi: ufs: ufs-pci: Fix Intel LKF link stability Intel LKF can experience link errors. Make fixes to increase link stability, especially when switching to high speed modes. Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com Fixes: b2c57925df1f ("scsi: ufs: ufs-pci: Add support for Intel LKF") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd-pci.c | 78 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd.c | 3 +- drivers/scsi/ufs/ufshcd.h | 1 + 3 files changed, 81 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index b3bcc5c882da..149c1aa09103 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -128,6 +128,81 @@ static int ufs_intel_link_startup_notify(struct ufs_hba *hba, return err; } +static int ufs_intel_set_lanes(struct ufs_hba *hba, u32 lanes) +{ + struct ufs_pa_layer_attr pwr_info = hba->pwr_info; + int ret; + + pwr_info.lane_rx = lanes; + pwr_info.lane_tx = lanes; + ret = ufshcd_config_pwr_mode(hba, &pwr_info); + if (ret) + dev_err(hba->dev, "%s: Setting %u lanes, err = %d\n", + __func__, lanes, ret); + return ret; +} + +static int ufs_intel_lkf_pwr_change_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status, + struct ufs_pa_layer_attr *dev_max_params, + struct ufs_pa_layer_attr *dev_req_params) +{ + int err = 0; + + switch (status) { + case PRE_CHANGE: + if (ufshcd_is_hs_mode(dev_max_params) && + (hba->pwr_info.lane_rx != 2 || hba->pwr_info.lane_tx != 2)) + ufs_intel_set_lanes(hba, 2); + memcpy(dev_req_params, dev_max_params, sizeof(*dev_req_params)); + break; + case POST_CHANGE: + if (ufshcd_is_hs_mode(dev_req_params)) { + u32 peer_granularity; + + usleep_range(1000, 1250); + err = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), + &peer_granularity); + } + break; + default: + break; + } + + return err; +} + +static int ufs_intel_lkf_apply_dev_quirks(struct ufs_hba *hba) +{ + u32 granularity, peer_granularity; + u32 pa_tactivate, peer_pa_tactivate; + int ret; + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &granularity); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &peer_granularity); + if (ret) + goto out; + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &peer_pa_tactivate); + if (ret) + goto out; + + if (granularity == peer_granularity) { + u32 new_peer_pa_tactivate = pa_tactivate + 2; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE), new_peer_pa_tactivate); + } +out: + return ret; +} + #define INTEL_ACTIVELTR 0x804 #define INTEL_IDLELTR 0x808 @@ -351,6 +426,7 @@ static int ufs_intel_lkf_init(struct ufs_hba *hba) struct ufs_host *ufs_host; int err; + hba->nop_out_timeout = 200; hba->quirks |= UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8; hba->caps |= UFSHCD_CAP_CRYPTO; err = ufs_intel_common_init(hba); @@ -381,6 +457,8 @@ static struct ufs_hba_variant_ops ufs_intel_lkf_hba_vops = { .exit = ufs_intel_common_exit, .hce_enable_notify = ufs_intel_hce_enable_notify, .link_startup_notify = ufs_intel_link_startup_notify, + .pwr_change_notify = ufs_intel_lkf_pwr_change_notify, + .apply_dev_quirks = ufs_intel_lkf_apply_dev_quirks, .resume = ufs_intel_resume, .device_reset = ufs_intel_device_reset, }; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 3841ab49f556..67889d74761c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4776,7 +4776,7 @@ static int ufshcd_verify_dev_init(struct ufs_hba *hba) mutex_lock(&hba->dev_cmd.lock); for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, - NOP_OUT_TIMEOUT); + hba->nop_out_timeout); if (!err || err == -ETIMEDOUT) break; @@ -9483,6 +9483,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) hba->host = host; hba->dev = dev; hba->dev_ref_clk_freq = REF_CLK_FREQ_INVAL; + hba->nop_out_timeout = NOP_OUT_TIMEOUT; INIT_LIST_HEAD(&hba->clk_list_head); spin_lock_init(&hba->outstanding_lock); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 52ea6f350b18..4723f27a55d1 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -858,6 +858,7 @@ struct ufs_hba { /* Device management request data */ struct ufs_dev_cmd dev_cmd; ktime_t last_dme_cmd_tstamp; + int nop_out_timeout; /* Keeps information of the UFS device connected to this host */ struct ufs_dev_info dev_info; -- cgit v1.2.3 From 4521428c48118b0f5f7a637ce7dedd76c29bcdaa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 11 Sep 2021 14:11:59 +0200 Subject: scsi: sd: Make sd_spinup_disk() less noisy sd_spinup_disk() is a little bit noisy after commit 848ade90ba9c ("scsi: sd: Do not exit sd_spinup_disk() quietly"): scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: [sda] Media removed, stopped polling There's not really a benefit in printing the same message multiple times. Therefore print it only if media_present was previously set. Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.com Reviewed-by: Bart Van Assche Signed-off-by: Heiner Kallweit Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a8039beb5a02..523bf2fdc253 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2124,6 +2124,8 @@ sd_spinup_disk(struct scsi_disk *sdkp) retries = 0; do { + bool media_was_present = sdkp->media_present; + cmd[0] = TEST_UNIT_READY; memset((void *) &cmd[1], 0, 9); @@ -2138,7 +2140,8 @@ sd_spinup_disk(struct scsi_disk *sdkp) * with any more polling. */ if (media_not_present(sdkp, &sshdr)) { - sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n"); + if (media_was_present) + sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n"); return; } -- cgit v1.2.3 From 1a0db7744e453844aa2db3f2959aea4a378025ea Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Sat, 11 Sep 2021 18:53:06 +0800 Subject: scsi: bsg: Fix device unregistration device_initialize() is used to take a refcount on the device. However, put_device() is not called during device teardown. This leads to a leak of private data of the driver core, dev_name(), etc. This is reported by kmemleak at boot time if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. Fix memory leaks during unregistration and implement a release function. Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com Fixes: ead09dd3aed5 ("scsi: bsg: Simplify device registration") Reviewed-by: Johan Hovold Signed-off-by: Zenghui Yu Signed-off-by: Martin K. Petersen --- block/bsg.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/block/bsg.c b/block/bsg.c index 351095193788..882f56bff14f 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -165,13 +165,20 @@ static const struct file_operations bsg_fops = { .llseek = default_llseek, }; +static void bsg_device_release(struct device *dev) +{ + struct bsg_device *bd = container_of(dev, struct bsg_device, device); + + ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); + kfree(bd); +} + void bsg_unregister_queue(struct bsg_device *bd) { if (bd->queue->kobj.sd) sysfs_remove_link(&bd->queue->kobj, "bsg"); cdev_device_del(&bd->cdev, &bd->device); - ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); - kfree(bd); + put_device(&bd->device); } EXPORT_SYMBOL_GPL(bsg_unregister_queue); @@ -193,11 +200,13 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, if (ret < 0) { if (ret == -ENOSPC) dev_err(parent, "bsg: too many bsg devices\n"); - goto out_kfree; + kfree(bd); + return ERR_PTR(ret); } bd->device.devt = MKDEV(bsg_major, ret); bd->device.class = bsg_class; bd->device.parent = parent; + bd->device.release = bsg_device_release; dev_set_name(&bd->device, "%s", name); device_initialize(&bd->device); @@ -205,7 +214,7 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, bd->cdev.owner = THIS_MODULE; ret = cdev_device_add(&bd->cdev, &bd->device); if (ret) - goto out_ida_remove; + goto out_put_device; if (q->kobj.sd) { ret = sysfs_create_link(&q->kobj, &bd->device.kobj, "bsg"); @@ -217,10 +226,8 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, out_device_del: cdev_device_del(&bd->cdev, &bd->device); -out_ida_remove: - ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); -out_kfree: - kfree(bd); +out_put_device: + put_device(&bd->device); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(bsg_register_queue); -- cgit v1.2.3 From 88a3856c0a8c03188db7913f4d49379432fe1f93 Mon Sep 17 00:00:00 2001 From: jing yangyang Date: Thu, 19 Aug 2021 20:21:27 -0700 Subject: tee/optee/shm_pool: fix application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer. ./drivers/tee/optee/shm_pool.c:38:28-34: ERROR application of sizeof to pointer This issue was detected with the help of Coccinelle. Reviewed-by: Daniel Thompson Reported-by: Zeal Robot Signed-off-by: jing yangyang Signed-off-by: Jens Wiklander --- drivers/tee/optee/shm_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c index c41a9a501a6e..d167039af519 100644 --- a/drivers/tee/optee/shm_pool.c +++ b/drivers/tee/optee/shm_pool.c @@ -35,7 +35,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, unsigned int nr_pages = 1 << order, i; struct page **pages; - pages = kcalloc(nr_pages, sizeof(pages), GFP_KERNEL); + pages = kcalloc(nr_pages, sizeof(*pages), GFP_KERNEL); if (!pages) { rc = -ENOMEM; goto err; -- cgit v1.2.3 From b564171ade70570b7f335fa8ed17adb28409e3ac Mon Sep 17 00:00:00 2001 From: Li Li Date: Fri, 10 Sep 2021 09:42:10 -0700 Subject: binder: fix freeze race Currently cgroup freezer is used to freeze the application threads, and BINDER_FREEZE is used to freeze the corresponding binder interface. There's already a mechanism in ioctl(BINDER_FREEZE) to wait for any existing transactions to drain out before actually freezing the binder interface. But freezing an app requires 2 steps, freezing the binder interface with ioctl(BINDER_FREEZE) and then freezing the application main threads with cgroupfs. This is not an atomic operation. The following race issue might happen. 1) Binder interface is frozen by ioctl(BINDER_FREEZE); 2) Main thread A initiates a new sync binder transaction to process B; 3) Main thread A is frozen by "echo 1 > cgroup.freeze"; 4) The response from process B reaches the frozen thread, which will unexpectedly fail. This patch provides a mechanism to check if there's any new pending transaction happening between ioctl(BINDER_FREEZE) and freezing the main thread. If there's any, the main thread freezing operation can be rolled back to finish the pending transaction. Furthermore, the response might reach the binder driver before the rollback actually happens. That will still cause failed transaction. As the other process doesn't wait for another response of the response, the response transaction failure can be fixed by treating the response transaction like an oneway/async one, allowing it to reach the frozen thread. And it will be consumed when the thread gets unfrozen later. NOTE: This patch reuses the existing definition of struct binder_frozen_status_info but expands the bit assignments of __u32 member sync_recv. To ensure backward compatibility, bit 0 of sync_recv still indicates there's an outstanding sync binder transaction. This patch adds new information to bit 1 of sync_recv, indicating the binder transaction happens exactly when there's a race. If an existing userspace app runs on a new kernel, a sync binder call will set bit 0 of sync_recv so ioctl(BINDER_GET_FROZEN_INFO) still return the expected value (true). The app just doesn't check bit 1 intentionally so it doesn't have the ability to tell if there's a race. This behavior is aligned with what happens on an old kernel which doesn't set bit 1 at all. A new userspace app can 1) check bit 0 to know if there's a sync binder transaction happened when being frozen - same as before; and 2) check bit 1 to know if that sync binder transaction happened exactly when there's a race - a new information for rollback decision. the same time, confirmed the pending transactions succeeded. Fixes: 432ff1e91694 ("binder: BINDER_FREEZE ioctl") Acked-by: Todd Kjos Cc: stable Signed-off-by: Li Li Test: stress test with apps being frozen and initiating binder calls at Link: https://lore.kernel.org/r/20210910164210.2282716-2-dualli@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 35 +++++++++++++++++++++++++++++------ drivers/android/binder_internal.h | 2 ++ include/uapi/linux/android/binder.h | 7 +++++++ 3 files changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index d9030cb6b1e4..1a68c2f590cf 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -3038,9 +3038,8 @@ static void binder_transaction(struct binder_proc *proc, if (reply) { binder_enqueue_thread_work(thread, tcomplete); binder_inner_proc_lock(target_proc); - if (target_thread->is_dead || target_proc->is_frozen) { - return_error = target_thread->is_dead ? - BR_DEAD_REPLY : BR_FROZEN_REPLY; + if (target_thread->is_dead) { + return_error = BR_DEAD_REPLY; binder_inner_proc_unlock(target_proc); goto err_dead_proc_or_thread; } @@ -4648,6 +4647,22 @@ static int binder_ioctl_get_node_debug_info(struct binder_proc *proc, return 0; } +static bool binder_txns_pending_ilocked(struct binder_proc *proc) +{ + struct rb_node *n; + struct binder_thread *thread; + + if (proc->outstanding_txns > 0) + return true; + + for (n = rb_first(&proc->threads); n; n = rb_next(n)) { + thread = rb_entry(n, struct binder_thread, rb_node); + if (thread->transaction_stack) + return true; + } + return false; +} + static int binder_ioctl_freeze(struct binder_freeze_info *info, struct binder_proc *target_proc) { @@ -4679,8 +4694,13 @@ static int binder_ioctl_freeze(struct binder_freeze_info *info, (!target_proc->outstanding_txns), msecs_to_jiffies(info->timeout_ms)); - if (!ret && target_proc->outstanding_txns) - ret = -EAGAIN; + /* Check pending transactions that wait for reply */ + if (ret >= 0) { + binder_inner_proc_lock(target_proc); + if (binder_txns_pending_ilocked(target_proc)) + ret = -EAGAIN; + binder_inner_proc_unlock(target_proc); + } if (ret < 0) { binder_inner_proc_lock(target_proc); @@ -4696,6 +4716,7 @@ static int binder_ioctl_get_freezer_info( { struct binder_proc *target_proc; bool found = false; + __u32 txns_pending; info->sync_recv = 0; info->async_recv = 0; @@ -4705,7 +4726,9 @@ static int binder_ioctl_get_freezer_info( if (target_proc->pid == info->pid) { found = true; binder_inner_proc_lock(target_proc); - info->sync_recv |= target_proc->sync_recv; + txns_pending = binder_txns_pending_ilocked(target_proc); + info->sync_recv |= target_proc->sync_recv | + (txns_pending << 1); info->async_recv |= target_proc->async_recv; binder_inner_proc_unlock(target_proc); } diff --git a/drivers/android/binder_internal.h b/drivers/android/binder_internal.h index 810c0b84d3f8..402c4d4362a8 100644 --- a/drivers/android/binder_internal.h +++ b/drivers/android/binder_internal.h @@ -378,6 +378,8 @@ struct binder_ref { * binder transactions * (protected by @inner_lock) * @sync_recv: process received sync transactions since last frozen + * bit 0: received sync transaction after being frozen + * bit 1: new pending sync transaction during freezing * (protected by @inner_lock) * @async_recv: process received async transactions since last frozen * (protected by @inner_lock) diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 20e435fe657a..3246f2c74696 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -225,7 +225,14 @@ struct binder_freeze_info { struct binder_frozen_status_info { __u32 pid; + + /* process received sync transactions since last frozen + * bit 0: received sync transaction after being frozen + * bit 1: new pending sync transaction during freezing + */ __u32 sync_recv; + + /* process received async transactions since last frozen */ __u32 async_recv; }; -- cgit v1.2.3 From 5fdb55c1ac9585eb23bb2541d5819224429e103d Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 30 Aug 2021 12:51:46 -0700 Subject: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. Fixes: 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()") Cc: stable Reviewed-by: Martijn Coenen Acked-by: Christian Brauner Signed-off-by: Todd Kjos Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 1a68c2f590cf..9edacc8b9768 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1852,6 +1852,7 @@ static void binder_deferred_fd_close(int fd) } static void binder_transaction_buffer_release(struct binder_proc *proc, + struct binder_thread *thread, struct binder_buffer *buffer, binder_size_t failed_at, bool is_failure) @@ -2011,8 +2012,16 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, &proc->alloc, &fd, buffer, offset, sizeof(fd)); WARN_ON(err); - if (!err) + if (!err) { binder_deferred_fd_close(fd); + /* + * Need to make sure the thread goes + * back to userspace to complete the + * deferred close + */ + if (thread) + thread->looper_need_return = true; + } } } break; default: @@ -3104,7 +3113,7 @@ err_bad_parent: err_copy_data_failed: binder_free_txn_fixups(t); trace_binder_transaction_failed_buffer_release(t->buffer); - binder_transaction_buffer_release(target_proc, t->buffer, + binder_transaction_buffer_release(target_proc, NULL, t->buffer, buffer_offset, true); if (target_node) binder_dec_node_tmpref(target_node); @@ -3183,7 +3192,9 @@ err_invalid_target_handle: * Cleanup buffer and free it. */ static void -binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) +binder_free_buf(struct binder_proc *proc, + struct binder_thread *thread, + struct binder_buffer *buffer) { binder_inner_proc_lock(proc); if (buffer->transaction) { @@ -3211,7 +3222,7 @@ binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) binder_node_inner_unlock(buf_node); } trace_binder_transaction_buffer_release(buffer); - binder_transaction_buffer_release(proc, buffer, 0, false); + binder_transaction_buffer_release(proc, thread, buffer, 0, false); binder_alloc_free_buf(&proc->alloc, buffer); } @@ -3413,7 +3424,7 @@ static int binder_thread_write(struct binder_proc *proc, proc->pid, thread->pid, (u64)data_ptr, buffer->debug_id, buffer->transaction ? "active" : "finished"); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); break; } @@ -4106,7 +4117,7 @@ retry: buffer->transaction = NULL; binder_cleanup_transaction(t, "fd fixups failed", BR_FAILED_REPLY); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); binder_debug(BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n", proc->pid, thread->pid, -- cgit v1.2.3 From 7a8aa39d44564703620d937bb54cdea2d003657f Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 13 Sep 2021 17:05:51 +0100 Subject: nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM When I added nvmem_cell_read_variable_le_u32() and nvmem_cell_read_variable_le_u64() I forgot to add the "static inline" stub functions for when CONFIG_NVMEM wasn't defined. Add them now. This was causing problems with randconfig builds that compiled `drivers/soc/qcom/cpr.c`. Fixes: 6feba6a62c57 ("PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()") Fixes: a28e824fb827 ("nvmem: core: Add functions to make number reading easy") Reported-by: kernel test robot Reviewed-by: Bjorn Andersson Signed-off-by: Douglas Anderson Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210913160551.12907-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- include/linux/nvmem-consumer.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 923dada24eb4..c0c0cefc3b92 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -150,6 +150,20 @@ static inline int nvmem_cell_read_u64(struct device *dev, return -EOPNOTSUPP; } +static inline int nvmem_cell_read_variable_le_u32(struct device *dev, + const char *cell_id, + u32 *val) +{ + return -EOPNOTSUPP; +} + +static inline int nvmem_cell_read_variable_le_u64(struct device *dev, + const char *cell_id, + u64 *val) +{ + return -EOPNOTSUPP; +} + static inline struct nvmem_device *nvmem_device_get(struct device *dev, const char *name) { -- cgit v1.2.3 From 212b5d2d3ed9d7db2702e4805f36a346c3985e1d Mon Sep 17 00:00:00 2001 From: Jian Cai Date: Mon, 13 Sep 2021 10:46:13 -0600 Subject: coresight: syscfg: Fix compiler warning This fixes warnings with -Wimplicit-function-declaration, e.g. drivers/hwtracing/coresight/coresight-syscfg.c:455:15: error: implicit declaration of function 'kzalloc' [-Werror, -Wimplicit-function-declaration] csdev_item = kzalloc(sizeof(struct cscfg_registered_csdev), GFP_KERNEL); Link: https://lore.kernel.org/r/20210830172820.2840433-1-jiancai@google.com Fixes: 85e2414c518a ("coresight: syscfg: Initial coresight system configuration") Reviewed-by: Guenter Roeck Signed-off-by: Jian Cai Signed-off-by: Mathieu Poirier Link: https://lore.kernel.org/r/20210913164613.1675791-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-syscfg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index fc0760f55c53..43054568430f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -5,6 +5,7 @@ */ #include +#include #include "coresight-config.h" #include "coresight-etm-perf.h" -- cgit v1.2.3 From 92dc0b1f46e12cfabd28d709bb34f7a39431b44f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Sep 2021 14:45:38 +0200 Subject: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. Fixes: a18e15175708 ("greybus: more uart work") Cc: stable@vger.kernel.org # 4.9 Reviewed-by: Alex Elder Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/uart.c | 62 ++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 30 deletions(-) diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index e6d860a9678e..dc4ed0ff1ae2 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -761,6 +761,17 @@ out: gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev); } +static void gb_tty_port_destruct(struct tty_port *port) +{ + struct gb_tty *gb_tty = container_of(port, struct gb_tty, port); + + if (gb_tty->minor != GB_NUM_MINORS) + release_minor(gb_tty); + kfifo_free(&gb_tty->write_fifo); + kfree(gb_tty->buffer); + kfree(gb_tty); +} + static const struct tty_operations gb_ops = { .install = gb_tty_install, .open = gb_tty_open, @@ -786,6 +797,7 @@ static const struct tty_port_operations gb_port_ops = { .dtr_rts = gb_tty_dtr_rts, .activate = gb_tty_port_activate, .shutdown = gb_tty_port_shutdown, + .destruct = gb_tty_port_destruct, }; static int gb_uart_probe(struct gbphy_device *gbphy_dev, @@ -798,17 +810,11 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, int retval; int minor; - gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); - if (!gb_tty) - return -ENOMEM; - connection = gb_connection_create(gbphy_dev->bundle, le16_to_cpu(gbphy_dev->cport_desc->id), gb_uart_request_handler); - if (IS_ERR(connection)) { - retval = PTR_ERR(connection); - goto exit_tty_free; - } + if (IS_ERR(connection)) + return PTR_ERR(connection); max_payload = gb_operation_get_payload_size_max(connection); if (max_payload < sizeof(struct gb_uart_send_data_request)) { @@ -816,13 +822,23 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, goto exit_connection_destroy; } + gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); + if (!gb_tty) { + retval = -ENOMEM; + goto exit_connection_destroy; + } + + tty_port_init(&gb_tty->port); + gb_tty->port.ops = &gb_port_ops; + gb_tty->minor = GB_NUM_MINORS; + gb_tty->buffer_payload_max = max_payload - sizeof(struct gb_uart_send_data_request); gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL); if (!gb_tty->buffer) { retval = -ENOMEM; - goto exit_connection_destroy; + goto exit_put_port; } INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work); @@ -830,7 +846,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE, GFP_KERNEL); if (retval) - goto exit_buf_free; + goto exit_put_port; gb_tty->credits = GB_UART_FIRMWARE_CREDITS; init_completion(&gb_tty->credits_complete); @@ -844,7 +860,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, } else { retval = minor; } - goto exit_kfifo_free; + goto exit_put_port; } gb_tty->minor = minor; @@ -853,9 +869,6 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, init_waitqueue_head(&gb_tty->wioctl); mutex_init(&gb_tty->mutex); - tty_port_init(&gb_tty->port); - gb_tty->port.ops = &gb_port_ops; - gb_tty->connection = connection; gb_tty->gbphy_dev = gbphy_dev; gb_connection_set_data(connection, gb_tty); @@ -863,7 +876,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = gb_connection_enable_tx(connection); if (retval) - goto exit_release_minor; + goto exit_put_port; send_control(gb_tty, gb_tty->ctrlout); @@ -890,16 +903,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, exit_connection_disable: gb_connection_disable(connection); -exit_release_minor: - release_minor(gb_tty); -exit_kfifo_free: - kfifo_free(&gb_tty->write_fifo); -exit_buf_free: - kfree(gb_tty->buffer); +exit_put_port: + tty_port_put(&gb_tty->port); exit_connection_destroy: gb_connection_destroy(connection); -exit_tty_free: - kfree(gb_tty); return retval; } @@ -930,15 +937,10 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) gb_connection_disable_rx(connection); tty_unregister_device(gb_tty_driver, gb_tty->minor); - /* FIXME - free transmit / receive buffers */ - gb_connection_disable(connection); - tty_port_destroy(&gb_tty->port); gb_connection_destroy(connection); - release_minor(gb_tty); - kfifo_free(&gb_tty->write_fifo); - kfree(gb_tty->buffer); - kfree(gb_tty); + + tty_port_put(&gb_tty->port); } static int gb_tty_init(void) -- cgit v1.2.3 From 79e9e30a9292a62d25ab75488d3886108db1eaad Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 3 Sep 2021 00:05:50 -0500 Subject: serial: 8250: 8250_omap: Fix RX_LVL register offset Commit b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") introduced fixup including a register read to RX_LVL, however, we should be using word offset than byte offset since our registers are on 4 byte boundary (port.regshift = 2) for 8250_omap. Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable Cc: Jan Kiszka Cc: Vignesh Raghavendra Signed-off-by: Nishanth Menon Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 891fd8345e25..73e5f1dbd075 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -106,7 +106,7 @@ #define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) /* RX FIFO occupancy indicator */ -#define UART_OMAP_RX_LVL 0x64 +#define UART_OMAP_RX_LVL 0x19 struct omap8250_priv { int line; -- cgit v1.2.3 From 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 11 Sep 2021 15:20:17 +0200 Subject: serial: mvebu-uart: fix driver's tx_empty callback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mvebu-uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 231de29a6452..ab226da75f7b 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -163,7 +163,7 @@ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) st = readl(port->membase + UART_STAT); spin_unlock_irqrestore(&port->lock, flags); - return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; + return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0; } static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) -- cgit v1.2.3 From 844f7eaaed9267ae17d33778efe65548cc940205 Mon Sep 17 00:00:00 2001 From: Eugene Syromiatnikov Date: Sun, 12 Sep 2021 14:22:34 +0200 Subject: include/uapi/linux/xfrm.h: Fix XFRM_MSG_MAPPING ABI breakage Commit 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") broke ABI by changing the value of the XFRM_MSG_MAPPING enum item, thus also evading the build-time check in security/selinux/nlmsgtab.c:selinux_nlmsg_lookup for presence of proper security permission checks in nlmsg_xfrm_perms. Fix it by placing XFRM_MSG_SETDEFAULT/XFRM_MSG_GETDEFAULT to the end of the enum, right before __XFRM_MSG_MAX, and updating the nlmsg_xfrm_perms accordingly. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") References: https://lore.kernel.org/netdev/20210901151402.GA2557@altlinux.org/ Signed-off-by: Eugene Syromiatnikov Acked-by: Antony Antony Acked-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 6 +++--- security/selinux/nlmsgtab.c | 4 +++- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index b96c1ea7166d..26f456b1f33e 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -213,13 +213,13 @@ enum { XFRM_MSG_GETSPDINFO, #define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO + XFRM_MSG_MAPPING, +#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING + XFRM_MSG_SETDEFAULT, #define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT XFRM_MSG_GETDEFAULT, #define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT - - XFRM_MSG_MAPPING, -#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c index d59276f48d4f..94ea2a8b2bb7 100644 --- a/security/selinux/nlmsgtab.c +++ b/security/selinux/nlmsgtab.c @@ -126,6 +126,8 @@ static const struct nlmsg_perm nlmsg_xfrm_perms[] = { XFRM_MSG_NEWSPDINFO, NETLINK_XFRM_SOCKET__NLMSG_WRITE }, { XFRM_MSG_GETSPDINFO, NETLINK_XFRM_SOCKET__NLMSG_READ }, { XFRM_MSG_MAPPING, NETLINK_XFRM_SOCKET__NLMSG_READ }, + { XFRM_MSG_SETDEFAULT, NETLINK_XFRM_SOCKET__NLMSG_WRITE }, + { XFRM_MSG_GETDEFAULT, NETLINK_XFRM_SOCKET__NLMSG_READ }, }; static const struct nlmsg_perm nlmsg_audit_perms[] = @@ -189,7 +191,7 @@ int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm) * structures at the top of this file with the new mappings * before updating the BUILD_BUG_ON() macro! */ - BUILD_BUG_ON(XFRM_MSG_MAX != XFRM_MSG_MAPPING); + BUILD_BUG_ON(XFRM_MSG_MAX != XFRM_MSG_GETDEFAULT); err = nlmsg_perm(nlmsg_type, perm, nlmsg_xfrm_perms, sizeof(nlmsg_xfrm_perms)); break; -- cgit v1.2.3 From f81c08f897adafd2ed43f86f00207ff929f0b2eb Mon Sep 17 00:00:00 2001 From: Faizel K B Date: Thu, 2 Sep 2021 17:14:44 +0530 Subject: usb: testusb: Fix for showing the connection speed testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed. sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs Signed-off-by: Faizel K B Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman --- tools/usb/testusb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index ee8208b2f946..69c3ead25313 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -265,12 +265,6 @@ nomem: } entry->ifnum = ifnum; - - /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ - - fprintf(stderr, "%s speed\t%s\t%u\n", - speed(entry->speed), entry->name, entry->ifnum); - entry->next = testdevs; testdevs = entry; return 0; @@ -299,6 +293,14 @@ static void *handle_testdev (void *arg) return 0; } + status = ioctl(fd, USBDEVFS_GET_SPEED, NULL); + if (status < 0) + fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status); + else + dev->speed = status; + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(dev->speed), dev->name, dev->ifnum); + restart: for (i = 0; i < TEST_CASES; i++) { if (dev->test != -1 && dev->test != i) -- cgit v1.2.3 From f5dfd98a80ff8d50cf4ae2820857d7f5a46cbab9 Mon Sep 17 00:00:00 2001 From: Pavel Hofman Date: Mon, 6 Sep 2021 15:08:22 +0200 Subject: usb: gadget: u_audio: EP-OUT bInterval in fback frequency The patch increases the bitshift in feedback frequency calculation with EP-OUT bInterval value. Tests have revealed that Win10 and OSX UAC2 drivers require the feedback frequency to be based on the actual packet interval instead of on the USB2 microframe. Otherwise they ignore the feedback value. Linux snd-usb-audio driver detects the applied bitshift automatically. Tested-by: Henrik Enquist Signed-off-by: Pavel Hofman Cc: stable Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_audio.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 32ef22857083..ad16163b5ff8 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -96,11 +96,13 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { }; static void u_audio_set_fback_frequency(enum usb_device_speed speed, + struct usb_ep *out_ep, unsigned long long freq, unsigned int pitch, void *buf) { u32 ff = 0; + const struct usb_endpoint_descriptor *ep_desc; /* * Because the pitch base is 1000000, the final divider here @@ -128,8 +130,13 @@ static void u_audio_set_fback_frequency(enum usb_device_speed speed, * byte fromat (that is Q16.16) * * ff = (freq << 16) / 8000 + * + * Win10 and OSX UAC2 drivers require number of samples per packet + * in order to honor the feedback value. + * Linux snd-usb-audio detects the applied bit-shift automatically. */ - freq <<= 4; + ep_desc = out_ep->desc; + freq <<= 4 + (ep_desc->bInterval - 1); } ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125); @@ -267,7 +274,7 @@ static void u_audio_iso_fback_complete(struct usb_ep *ep, pr_debug("%s: iso_complete status(%d) %d/%d\n", __func__, status, req->actual, req->length); - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep, params->c_srate, prm->pitch, req->buf); @@ -526,7 +533,7 @@ int u_audio_start_capture(struct g_audio *audio_dev) * be meauserd at start of playback */ prm->pitch = 1000000; - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, ep, params->c_srate, prm->pitch, req_fback->buf); -- cgit v1.2.3 From 17956b53ebff6a490baf580a836cbd3eae94892b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 12:42:21 +0300 Subject: usb: gadget: r8a66597: fix a loop in set_feature() This loop is supposed to loop until if reads something other than CS_IDST or until it times out after 30,000 attempts. But because of the || vs && bug, it will never time out and instead it will loop a minimum of 30,000 times. This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE so it probably doesn't affect regular usage. Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE") Cc: stable Reviewed-by: Yoshihiro Shimoda Acked-by: Felipe Balbi Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210906094221.GA10957@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/r8a66597-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 65cae4883454..38e4d6b505a0 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1250,7 +1250,7 @@ static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) do { tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ; udelay(1); - } while (tmp != CS_IDST || timeout-- > 0); + } while (tmp != CS_IDST && timeout-- > 0); if (tmp == CS_IDST) r8a66597_bset(r8a66597, -- cgit v1.2.3 From b69ec50b3e55c4b2a85c8bc46763eaf330605847 Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Tue, 7 Sep 2021 08:26:19 +0200 Subject: usb: cdns3: fix race condition before setting doorbell For DEV_VER_V3 version there exist race condition between clearing ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit. Setting EP_CMD_DRDY will be ignored by controller when EP_STS_TRBERR is set. So, between these two instructions we have a small time gap in which the EP_STSS_TRBERR can be set. In such case the transfer will not start after setting doorbell. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: # 5.12.x Tested-by: Aswath Govindraju Reviewed-by: Aswath Govindraju Signed-off-by: Pawel Laszczak Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdns3-gadget.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 5d8c982019af..1f3b4a142212 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -1100,6 +1100,19 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, return 0; } +static void cdns3_rearm_drdy_if_needed(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_dev->dev_ver < DEV_VER_V3) + return; + + if (readl(&priv_dev->regs->ep_sts) & EP_STS_TRBERR) { + writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + } +} + /** * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware * @priv_ep: endpoint object @@ -1351,6 +1364,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + cdns3_rearm_drdy_if_needed(priv_ep); trace_cdns3_doorbell_epx(priv_ep->name, readl(&priv_dev->regs->ep_traddr)); } -- cgit v1.2.3 From 856e6e8e0f9300befa87dde09edb578555c99a82 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 31 Aug 2021 16:42:36 +0800 Subject: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2a7828971d05..a215ec9e172e 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5191,6 +5191,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) hcd->has_tt = 1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -EINVAL; + goto error1; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); -- cgit v1.2.3 From 91fac0741d4817945c6ee0a17591421e7f5ecb86 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 7 Sep 2021 10:23:18 +0200 Subject: USB: cdc-acm: fix minor-number release If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++-- drivers/usb/class/cdc-acm.h | 2 ++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8bbd8e29e60d..4e2f1552f4b7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -726,7 +726,8 @@ static void acm_port_destruct(struct tty_port *port) { struct acm *acm = container_of(port, struct acm, port); - acm_release_minor(acm); + if (acm->minor != ACM_MINOR_INVALID) + acm_release_minor(acm); usb_put_intf(acm->control); kfree(acm->country_codes); kfree(acm); @@ -1323,8 +1324,10 @@ made_compressed_probe: usb_get_intf(acm->control); /* undone in destruct() */ minor = acm_alloc_minor(acm); - if (minor < 0) + if (minor < 0) { + acm->minor = ACM_MINOR_INVALID; goto err_put_port; + } acm->minor = minor; acm->dev = usb_dev; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 8aef5eb769a0..3aa7f0a3ad71 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -22,6 +22,8 @@ #define ACM_TTY_MAJOR 166 #define ACM_TTY_MINORS 256 +#define ACM_MINOR_INVALID ACM_TTY_MINORS + /* * Requests. */ -- cgit v1.2.3 From aad06846a2304e48e7a223fad8971eed16179606 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 7 Sep 2021 05:30:02 -0700 Subject: usb: ehci: Simplify platform driver registration Use platform_register_drivers() and platform_unregister_drivers() to register and unregister ehci platform drivers. This simplifies the code and prevents the following build errors seen with sparc:allmodconfig. drivers/usb/host/ehci-hcd.c:1301: error: "PLATFORM_DRIVER" redefined drivers/usb/host/ehci-sh.c:173:31: error: 'ehci_hcd_sh_driver' defined but not used Acked-by: Alan Stern Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210907123002.3951446-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 75 ++++++++++++++++----------------------------- 1 file changed, 27 insertions(+), 48 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6bdc6d6bf74d..1776c05d0a48 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -1278,29 +1279,39 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" -#define PLATFORM_DRIVER ehci_hcd_sh_driver #endif #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" -#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver #endif #ifdef CONFIG_USB_EHCI_HCD_PPC_OF #include "ehci-ppc-of.c" -#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver #endif #ifdef CONFIG_XPS_USB_HCD_XILINX #include "ehci-xilinx-of.c" -#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif #ifdef CONFIG_SPARC_LEON #include "ehci-grlib.c" -#define PLATFORM_DRIVER ehci_grlib_driver #endif +static struct platform_driver * const platform_drivers[] = { +#ifdef CONFIG_USB_EHCI_SH + &ehci_hcd_sh_driver, +#endif +#ifdef CONFIG_USB_EHCI_HCD_PPC_OF + &ehci_hcd_ppc_of_driver, +#endif +#ifdef CONFIG_XPS_USB_HCD_XILINX + &ehci_hcd_xilinx_of_driver, +#endif +#ifdef CONFIG_SPARC_LEON + &ehci_grlib_driver, +#endif +}; + static int __init ehci_hcd_init(void) { int retval = 0; @@ -1324,47 +1335,23 @@ static int __init ehci_hcd_init(void) ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root); #endif -#ifdef PLATFORM_DRIVER - retval = platform_driver_register(&PLATFORM_DRIVER); + retval = platform_register_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); if (retval < 0) goto clean0; -#endif - -#ifdef PS3_SYSTEM_BUS_DRIVER - retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER); - if (retval < 0) - goto clean2; -#endif -#ifdef OF_PLATFORM_DRIVER - retval = platform_driver_register(&OF_PLATFORM_DRIVER); +#ifdef CONFIG_PPC_PS3 + retval = ps3_ehci_driver_register(&ps3_ehci_driver); if (retval < 0) - goto clean3; + goto clean1; #endif -#ifdef XILINX_OF_PLATFORM_DRIVER - retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER); - if (retval < 0) - goto clean4; -#endif - return retval; + return 0; -#ifdef XILINX_OF_PLATFORM_DRIVER - /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */ -clean4: -#endif -#ifdef OF_PLATFORM_DRIVER - platform_driver_unregister(&OF_PLATFORM_DRIVER); -clean3: -#endif -#ifdef PS3_SYSTEM_BUS_DRIVER - ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); -clean2: +#ifdef CONFIG_PPC_PS3 +clean1: #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); + platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); clean0: -#endif #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; @@ -1376,18 +1363,10 @@ module_init(ehci_hcd_init); static void __exit ehci_hcd_cleanup(void) { -#ifdef XILINX_OF_PLATFORM_DRIVER - platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); -#endif -#ifdef OF_PLATFORM_DRIVER - platform_driver_unregister(&OF_PLATFORM_DRIVER); -#endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); -#endif -#ifdef PS3_SYSTEM_BUS_DRIVER - ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); +#ifdef CONFIG_PPC_PS3 + ps3_ehci_driver_unregister(&ps3_ehci_driver); #endif + platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); #endif -- cgit v1.2.3 From d91adc5322ab53df4b6d1989242bfb6c63163eb2 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Tue, 31 Aug 2021 08:54:19 +0200 Subject: Revert "USB: bcma: Add a check for devm_gpiod_get" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit f3de5d857bb2362b00e2a8d4bc886cd49dcb66db. That commit broke USB on all routers that have USB always powered on and don't require toggling any GPIO. It's a majority of devices actually. The original code worked and seemed safe: vcc GPIO is optional and bcma_hci_platform_power_gpio() takes care of checking the pointer before using it. This revert fixes: [ 10.801127] bcma_hcd: probe of bcma0:11 failed with error -2 Fixes: f3de5d857bb2 ("USB: bcma: Add a check for devm_gpiod_get") Cc: stable Cc: Chuhong Yuan Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/bcma-hcd.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index 337b425dd4b0..2df52f75f6b3 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -406,12 +406,9 @@ static int bcma_hcd_probe(struct bcma_device *core) return -ENOMEM; usb_dev->core = core; - if (core->dev.of_node) { + if (core->dev.of_node) usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc", GPIOD_OUT_HIGH); - if (IS_ERR(usb_dev->gpio_desc)) - return PTR_ERR(usb_dev->gpio_desc); - } switch (core->id.id) { case BCMA_CORE_USB20_HOST: -- cgit v1.2.3 From 8cfac9a6744fcb143cb3e94ce002f09fd17fadbb Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 8 Sep 2021 10:28:19 +0800 Subject: usb: dwc3: core: balance phy init and exit After we start to do core soft reset while usb role switch, the phy init is invoked at every switch to device mode, but its counter part de-init is missing, this causes the actual phy init can not be done when we really want to re-init phy like system resume, because the counter maintained by phy core is not 0. considering phy init is actually redundant for role switch, so move out the phy init from core soft reset to dwc3 core init where is the only place required. Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") Cc: Tested-by: faqiang.zhu Tested-by: John Stultz #HiKey960 Acked-by: Felipe Balbi Signed-off-by: Li Jun Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 01866dcb953b..0104a80b185e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - return -ETIMEDOUT; done: @@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->phys_ready = true; } + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err0a; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + goto err0a; + } + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err1; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { -- cgit v1.2.3 From 91bb163e1e4f88092f50dfaa5a816b658753e4b2 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 9 Sep 2021 14:45:15 +0400 Subject: usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan Cc: stable Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 189 ++++++++++++++++++++++++++-------------------- 1 file changed, 106 insertions(+), 83 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 837237e4bc96..f09cbdfac9df 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) */ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + hs_ep->target_frame += hs_ep->interval; - if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + if (hs_ep->target_frame > limit) { hs_ep->frame_overrun = true; - hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + hs_ep->target_frame &= limit; } else { hs_ep->frame_overrun = false; } @@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) */ static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + if (hs_ep->target_frame) hs_ep->target_frame -= 1; else - hs_ep->target_frame = DSTS_SOFFN_LIMIT; + hs_ep->target_frame = limit; } /** @@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, depctl); } +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } } - if (hs_ep->isochronous && hs_ep->interval == 1) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); - dwc2_gadget_incr_frame_num(hs_ep); - - if (hs_ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } } ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ @@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) u32 target_frame = hs_ep->target_frame; u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; if (!frame_overrun && current_frame >= target_frame) return true; if (frame_overrun && current_frame >= target_frame && - ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + ((current_frame - target_frame) < limit / 2)) return true; return false; @@ -1713,11 +1740,9 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) */ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) { - u32 mask; struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; struct dwc2_hsotg_req *hs_req; - u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; if (!list_empty(&hs_ep->queue)) { hs_req = get_ep_head(hs_ep); @@ -1733,9 +1758,6 @@ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) } else { dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", __func__); - mask = dwc2_readl(hsotg, epmsk_reg); - mask |= DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, mask, epmsk_reg); } } @@ -2306,19 +2328,6 @@ static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); } -static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, - u32 epctl_reg) -{ - u32 ctrl; - - ctrl = dwc2_readl(hsotg, epctl_reg); - if (ctrl & DXEPCTL_EOFRNUM) - ctrl |= DXEPCTL_SETEVENFR; - else - ctrl |= DXEPCTL_SETODDFR; - dwc2_writel(hsotg, ctrl, epctl_reg); -} - /* * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc * @hs_ep - The endpoint on which transfer went @@ -2439,20 +2448,11 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) dwc2_hsotg_ep0_zlp(hsotg, true); } - /* - * Slave mode OUT transfers do not go through XferComplete so - * adjust the ISOC parity here. - */ - if (!using_dma(hsotg)) { - if (hs_ep->isochronous && hs_ep->interval == 1) - dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum)); - else if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - } - /* Set actual frame number for completed transfers */ - if (!using_desc_dma(hsotg) && hs_ep->isochronous) - req->frame_number = hsotg->frame_number; + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } @@ -2766,6 +2766,12 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } @@ -2826,23 +2832,18 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); - if (hs_ep->isochronous) { - dwc2_hsotg_complete_in(hsotg, hs_ep); - return; - } - if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = dwc2_readl(hsotg, DCTL); dctl |= DCTL_CGNPINNAK; dwc2_writel(hsotg, dctl, DCTL); } - return; - } + } else { - if (dctl & DCTL_GOUTNAKSTS) { - dctl |= DCTL_CGOUTNAK; - dwc2_writel(hsotg, dctl, DCTL); + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } } if (!hs_ep->isochronous) @@ -2863,8 +2864,6 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); - - dwc2_gadget_start_next_request(hs_ep); } /** @@ -2881,8 +2880,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) { struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = ep->dir_in; - u32 doepmsk; if (dir_in || !ep->isochronous) return; @@ -2896,28 +2895,39 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) return; } - if (ep->interval > 1 && - ep->target_frame == TARGET_FRAME_INITIAL) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { u32 ctrl; ep->target_frame = hsotg->frame_number; - dwc2_gadget_incr_frame_num(ep); + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; - ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); - if (ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } + } + + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); - dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } - dwc2_gadget_start_next_request(ep); - doepmsk = dwc2_readl(hsotg, DOEPMSK); - doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, doepmsk, DOEPMSK); + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + /** * dwc2_gadget_handle_nak - handle NAK interrupt * @hs_ep: The endpoint on which interrupt is asserted. @@ -2935,7 +2945,9 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = hs_ep->dir_in; + u32 ctrl; if (!dir_in || !hs_ep->isochronous) return; @@ -2977,13 +2989,29 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); } - - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); } - if (!using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); } /** @@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * need to look at completing IN requests here * if operating slave mode */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_complete_in(hsotg, hs_ep); - if (ints & DXEPINT_NAKINTRPT) - ints &= ~DXEPINT_NAKINTRPT; + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) dwc2_hsotg_enqueue_setup(hsotg); @@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * We're using DMA, we need to fire an OutDone here * as we ignore the RXFIFO. */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_handle_outdone(hsotg, idx); + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); } } @@ -4085,6 +4107,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, mask |= DIEPMSK_NAKMSK; dwc2_writel(hsotg, mask, DIEPMSK); } else { + epctrl |= DXEPCTL_SNAK; mask = dwc2_readl(hsotg, DOEPMSK); mask |= DOEPMSK_OUTTKNEPDISMSK; dwc2_writel(hsotg, mask, DOEPMSK); -- cgit v1.2.3 From 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:58 +0530 Subject: usb: core: hcd: Add support for deferring roothub registration It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 29 +++++++++++++++++++++++------ include/linux/usb/hcd.h | 2 ++ 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0f8b7c93310e..99ff2d23be05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2775,6 +2775,7 @@ int usb_add_hcd(struct usb_hcd *hcd, { int retval; struct usb_device *rhdev; + struct usb_hcd *shared_hcd; if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); @@ -2935,13 +2936,26 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_start; } + /* starting here, usbcore will pay attention to the shared HCD roothub */ + shared_hcd = hcd->shared_hcd; + if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { + retval = register_root_hub(shared_hcd); + if (retval != 0) + goto err_register_root_hub; + + if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) + usb_hcd_poll_rh_status(shared_hcd); + } + /* starting here, usbcore will pay attention to this root hub */ - retval = register_root_hub(hcd); - if (retval != 0) - goto err_register_root_hub; + if (!HCD_DEFER_RH_REGISTER(hcd)) { + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); + } return retval; @@ -2985,6 +2999,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); void usb_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; + bool rh_registered; dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); @@ -2995,6 +3010,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); spin_lock_irq (&hcd_root_hub_lock); + rh_registered = hcd->rh_registered; hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); @@ -3004,7 +3020,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->died_work); mutex_lock(&usb_bus_idr_lock); - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + if (rh_registered) + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_idr_lock); /* diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 548a028f2dab..2c1fc9212cf2 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -124,6 +124,7 @@ struct usb_hcd { #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ +#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -134,6 +135,7 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) +#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) /* * Specifies if interfaces are authorized by default -- cgit v1.2.3 From b7a0a792f864583207c593b50fd1b752ed89f4c1 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:59 +0530 Subject: xhci: Set HCD flag to defer primary roothub registration Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f3dabd02382c..93c38b557afd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -692,6 +692,7 @@ int xhci_run(struct usb_hcd *hcd) if (ret) xhci_free_command(xhci, command); } + set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); -- cgit v1.2.3 From 5cf86349e98b14f505f83aae45a6df2bacc15a7a Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:12:00 +0530 Subject: usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd() No functional change. Since configuration to stop HCD is invoked from multiple places, group all of them in usb_stop_hcd(). Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 99ff2d23be05..7ee6e4cc0d89 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2760,6 +2760,26 @@ static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) usb_put_dev(rhdev); } +/** + * usb_stop_hcd - Halt the HCD + * @hcd: the usb_hcd that has to be halted + * + * Stop the root-hub polling timer and invoke the HCD's ->stop callback. + */ +static void usb_stop_hcd(struct usb_hcd *hcd) +{ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); +} + /** * usb_add_hcd - finish generic HCD structure initialization and register * @hcd: the usb_hcd structure to initialize @@ -2960,13 +2980,7 @@ int usb_add_hcd(struct usb_hcd *hcd, return retval; err_register_root_hub: - hcd->rh_pollable = 0; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); - hcd->driver->stop(hcd); - hcd->state = HC_STATE_HALT; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + usb_stop_hcd(hcd); err_hcd_driver_start: if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) free_irq(irqnum, hcd); @@ -3039,16 +3053,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke * the hub_status_data() callback. */ - hcd->rh_pollable = 0; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); - - hcd->driver->stop(hcd); - hcd->state = HC_STATE_HALT; - - /* In case the HCD restarted the timer, stop it again. */ - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + usb_stop_hcd(hcd); if (usb_hcd_is_primary_hcd(hcd)) { if (hcd->irq > 0) -- cgit v1.2.3 From dbe2518b2d8eabffa74dbf7d9fdd7dacddab7fc0 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Sat, 11 Sep 2021 22:58:30 +0400 Subject: usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA When last descriptor in a descriptor list completed with XferComplete interrupt, core switching to handle next descriptor and assert BNA interrupt. Both these interrupts are set while dwc2_hsotg_epint() handler called. Each interrupt should be handled separately: first XferComplete interrupt then BNA interrupt, otherwise last completed transfer will not be giveback to function driver as completed request. Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow") Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index f09cbdfac9df..11d85a6e0b0d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3067,9 +3067,7 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, /* In DDMA handle isochronous requests separately */ if (using_desc_dma(hsotg) && hs_ep->isochronous) { - /* XferCompl set along with BNA */ - if (!(ints & DXEPINT_BNAINTR)) - dwc2_gadget_complete_isoc_request_ddma(hs_ep); + dwc2_gadget_complete_isoc_request_ddma(hs_ep); } else if (dir_in) { /* * We get OutDone from the FIFO, so we only -- cgit v1.2.3 From 595091a1426a3b2625dad322f69fe569dc9d8943 Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Thu, 9 Sep 2021 10:48:10 -0700 Subject: usb: gadget: f_uac2: Add missing companion descriptor for feedback EP The f_uac2 function fails to enumerate when connected in SuperSpeed due to the feedback endpoint missing the companion descriptor. Add a new ss_epin_fback_desc_comp descriptor and append it behind the ss_epin_fback_desc both in the static definition of the ss_audio_desc structure as well as its dynamic construction in setup_headers(). Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Cc: stable Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_uac2.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 3c34995276e7..d89c1ebb07f4 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -406,6 +406,14 @@ static struct usb_endpoint_descriptor ss_epin_fback_desc = { .bInterval = 4, }; +static struct usb_ss_ep_comp_descriptor ss_epin_fback_desc_comp = { + .bLength = sizeof(ss_epin_fback_desc_comp), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(4), +}; + /* Audio Streaming IN Interface - Alt0 */ static struct usb_interface_descriptor std_as_in_if0_desc = { @@ -597,6 +605,7 @@ static struct usb_descriptor_header *ss_audio_desc[] = { (struct usb_descriptor_header *)&ss_epout_desc_comp, (struct usb_descriptor_header *)&as_iso_out_desc, (struct usb_descriptor_header *)&ss_epin_fback_desc, + (struct usb_descriptor_header *)&ss_epin_fback_desc_comp, (struct usb_descriptor_header *)&std_as_in_if0_desc, (struct usb_descriptor_header *)&std_as_in_if1_desc, @@ -705,6 +714,7 @@ static void setup_headers(struct f_uac2_opts *opts, { struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL; struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL; + struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL; struct usb_endpoint_descriptor *epout_desc; struct usb_endpoint_descriptor *epin_desc; struct usb_endpoint_descriptor *epin_fback_desc; @@ -730,6 +740,7 @@ static void setup_headers(struct f_uac2_opts *opts, epout_desc_comp = &ss_epout_desc_comp; epin_desc_comp = &ss_epin_desc_comp; epin_fback_desc = &ss_epin_fback_desc; + epin_fback_desc_comp = &ss_epin_fback_desc_comp; ep_int_desc = &ss_ep_int_desc; } @@ -773,8 +784,11 @@ static void setup_headers(struct f_uac2_opts *opts, headers[i++] = USBDHDR(&as_iso_out_desc); - if (EPOUT_FBACK_IN_EN(opts)) + if (EPOUT_FBACK_IN_EN(opts)) { headers[i++] = USBDHDR(epin_fback_desc); + if (epin_fback_desc_comp) + headers[i++] = USBDHDR(epin_fback_desc_comp); + } } if (EPIN_EN(opts)) { -- cgit v1.2.3 From f0e8a206a2a53a919e1709c654cb65d519f7befb Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Thu, 9 Sep 2021 10:48:11 -0700 Subject: usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval For Isochronous endpoints, the SS companion descriptor's wBytesPerInterval field is required to reserve bus time in order to transmit the required payload during the service interval. If left at 0, the UAC2 function is unable to transact data on its playback or capture endpoints in SuperSpeed mode. Since f_uac2 currently does not support any bursting this value can be exactly equal to the calculated wMaxPacketSize. Tested with Windows 10 as a host. Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP") Cc: stable Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_uac2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d89c1ebb07f4..be864560bfea 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1178,6 +1178,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize, le16_to_cpu(ss_epout_desc.wMaxPacketSize)); + ss_epin_desc_comp.wBytesPerInterval = ss_epin_desc.wMaxPacketSize; + ss_epout_desc_comp.wBytesPerInterval = ss_epout_desc.wMaxPacketSize; + // HS and SS endpoint addresses are copied from autoconfigured FS descriptors hs_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress; hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress; -- cgit v1.2.3 From 8d753db5c227d1f403c4bc9cae4ae02c862413cd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 8 Sep 2021 21:55:56 +0200 Subject: misc: genwqe: Fixes DMA mask setting Commit 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code") changed the logic in the code. Instead of a ||, a && should have been used to keep the code the same. Fixes: 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code") Cc: stable Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/be49835baa8ba6daba5813b399edf6300f7fdbda.1631130862.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/misc/genwqe/card_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 2e1befbd1ad9..693981891870 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -1090,7 +1090,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) /* check for 64-bit DMA address supported (DAC) */ /* check for 32-bit DMA address supported (SAC) */ - if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) || + if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) && dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) { dev_err(&pci_dev->dev, "err: neither DMA32 nor DMA64 supported\n"); -- cgit v1.2.3 From 06e49073dfba24df4b1073a068631b13a0039c34 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Sep 2021 17:38:06 -0700 Subject: tty: synclink_gt: rename a conflicting function name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Paul Fulghum Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/synclink_gt.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index a9acd93e85b7..25c558e65ece 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -438,8 +438,8 @@ static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); -static void get_signals(struct slgt_info *info); -static void set_signals(struct slgt_info *info); +static void get_gtsignals(struct slgt_info *info); +static void set_gtsignals(struct slgt_info *info); static void set_rate(struct slgt_info *info, u32 data_rate); static void bh_transmit(struct slgt_info *info); @@ -720,7 +720,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -730,7 +730,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if (!C_CRTSCTS(tty) || !tty_throttled(tty)) info->signals |= SerialSignal_RTS; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -1181,7 +1181,7 @@ static inline void line_info(struct seq_file *m, struct slgt_info *info) /* output current serial signal states */ spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); stat_buf[0] = 0; @@ -1281,7 +1281,7 @@ static void throttle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1306,7 +1306,7 @@ static void unthrottle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1477,7 +1477,7 @@ static int hdlcdev_open(struct net_device *dev) /* inform generic HDLC layer of current DCD status */ spin_lock_irqsave(&info->lock, flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock, flags); if (info->signals & SerialSignal_DCD) netif_carrier_on(dev); @@ -2229,7 +2229,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status) if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { info->signals &= ~SerialSignal_RTS; info->drop_rts_on_tx_done = false; - set_signals(info); + set_gtsignals(info); } #if SYNCLINK_GENERIC_HDLC @@ -2394,7 +2394,7 @@ static void shutdown(struct slgt_info *info) if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); } flush_cond_wait(&info->gpio_wait_q); @@ -2422,7 +2422,7 @@ static void program_hw(struct slgt_info *info) else async_mode(info); - set_signals(info); + set_gtsignals(info); info->dcd_chkcount = 0; info->cts_chkcount = 0; @@ -2430,7 +2430,7 @@ static void program_hw(struct slgt_info *info) info->dsr_chkcount = 0; slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); - get_signals(info); + get_gtsignals(info); if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) @@ -2667,7 +2667,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) spin_lock_irqsave(&info->lock,flags); /* return immediately if state matches requested events */ - get_signals(info); + get_gtsignals(info); s = info->signals; events = mask & @@ -3085,7 +3085,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + @@ -3124,7 +3124,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3135,7 +3135,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3150,7 +3150,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3948,10 +3948,10 @@ static void tx_start(struct slgt_info *info) if (info->params.mode != MGSL_MODE_ASYNC) { if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); + get_gtsignals(info); if (!(info->signals & SerialSignal_RTS)) { info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); info->drop_rts_on_tx_done = true; } } @@ -4005,7 +4005,7 @@ static void reset_port(struct slgt_info *info) rx_stop(info); info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); } @@ -4427,7 +4427,7 @@ static void tx_set_idle(struct slgt_info *info) /* * get state of V24 status (input) signals */ -static void get_signals(struct slgt_info *info) +static void get_gtsignals(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -4489,7 +4489,7 @@ static void msc_set_vcr(struct slgt_info *info) /* * set state of V24 control (output) signals */ -static void set_signals(struct slgt_info *info) +static void set_gtsignals(struct slgt_info *info) { unsigned char val = rd_reg8(info, VCR); if (info->signals & SerialSignal_DTR) -- cgit v1.2.3 From ad7cc2d41b7a8d0c5c5ecff37c3de7a4e137b3a6 Mon Sep 17 00:00:00 2001 From: Cameron Berkenpas Date: Mon, 13 Sep 2021 14:26:29 -0700 Subject: ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. This patch initializes and enables speaker output on the Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 series of laptops using the HDA verb sequence specific to each model. Speaker automute is suppressed for the Lenovo Legion 7i 15IMHG05 to avoid breaking speaker output on resume and when devices are unplugged from its headphone jack. Thanks to: Andreas Holzer, Vincent Morel, sycxyc, Max Christian Pohle and all others that helped. [ minor coding style fixes by tiwai ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Signed-off-by: Cameron Berkenpas Cc: Link: https://lore.kernel.org/r/20210913212627.339362-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 129 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8b7a389b6aed..4407f7da57c4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6429,6 +6429,20 @@ static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, hda_fixup_thinkpad_acpi(codec, fix, action); } +/* Fixup for Lenovo Legion 15IMHg05 speaker output on headset removal. */ +static void alc287_fixup_legion_15imhg05_speakers(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + struct alc_spec *spec = codec->spec; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + spec->gen.suppress_auto_mute = 1; + break; + } +} + /* for alc295_fixup_hp_top_speakers */ #include "hp_x360_helper.c" @@ -6646,6 +6660,10 @@ enum { ALC623_FIXUP_LENOVO_THINKSTATION_P340, ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST, + ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS, + ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE, + ALC287_FIXUP_YOGA7_14ITL_SPEAKERS, + ALC287_FIXUP_13S_GEN2_SPEAKERS }; static const struct hda_fixup alc269_fixups[] = { @@ -8236,6 +8254,113 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, }, + [ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + //.v.verbs = legion_15imhg05_coefs, + .v.verbs = (const struct hda_verb[]) { + // set left speaker Legion 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x1a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + // set right speaker Legion 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x42 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE, + }, + [ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc287_fixup_legion_15imhg05_speakers, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, + [ALC287_FIXUP_YOGA7_14ITL_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + // set left speaker Yoga 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x1a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + // set right speaker Yoga 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x46 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, + [ALC287_FIXUP_13S_GEN2_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x42 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8630,6 +8755,10 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME), SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3843, "Yoga 9i", ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP), + SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3852, "Lenovo Yoga 7 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), -- cgit v1.2.3 From da546d6b748e570aa6e44acaa515cfc43baeaa0d Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 3 Sep 2021 00:03:25 +0200 Subject: arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property tx-fifo-resize is now added by default by the dwc3-qcom driver to the SNPS DWC3 child node. So, lets drop the tx-fifo-resize property from dwc3-qcom nodes as having it there will cause the dwc3-qcom driver to error and abort probe with: [ 1.362938] dwc3-qcom 8af8800.usb: unable to add property [ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17 Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default") Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a620ac0d0b19..db333001df4d 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -487,7 +487,6 @@ interrupts = ; phys = <&qusb_phy_0>, <&usb0_ssphy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -528,7 +527,6 @@ interrupts = ; phys = <&qusb_phy_1>, <&usb1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; -- cgit v1.2.3 From 7049d853cfb928f50b6041cb4a5c6d6c1d8dd201 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 14 Sep 2021 11:11:19 +0200 Subject: tty: unexport tty_ldisc_release Initially, tty_ldisc_release() was exported for speakup (spk_tty) while in staging. Later, the call to this function was removed as it was bogus anyway. Remove the export now. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210914091134.17426-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 756a4bfa6a69..3e4e0b20b4bb 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -812,7 +812,6 @@ void tty_ldisc_release(struct tty_struct *tty) tty_ldisc_debug(tty, "released\n"); } -EXPORT_SYMBOL_GPL(tty_ldisc_release); /** * tty_ldisc_init - ldisc setup for new tty -- cgit v1.2.3 From 25a1433216489de4abc889910f744e952cb6dbae Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 21:35:48 +0900 Subject: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback") Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index edf4ee6eff25..cf128b3471d7 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -275,8 +275,8 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL); if (bus_nr < 0) { - rc = bus_nr; - goto err_free; + kfree(bus); + return ERR_PTR(bus_nr); } bus->bus_nr = bus_nr; @@ -291,12 +291,12 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) dev_set_name(&bus->dev, "mcb:%d", bus_nr); rc = device_add(&bus->dev); if (rc) - goto err_free; + goto err_put; return bus; -err_free: - put_device(carrier); - kfree(bus); + +err_put: + put_device(&bus->dev); return ERR_PTR(rc); } EXPORT_SYMBOL_NS_GPL(mcb_alloc_bus, MCB); -- cgit v1.2.3 From 3c3c8e88c8712bfe06cd10d7ca77a94a33610cd6 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 13 Sep 2021 21:01:14 -0500 Subject: platform/x86: amd-pmc: Increase the response register timeout There have been reports of approximately a 0.9%-1.7% failure rate in SMU communication timeouts with s0i3 entry on some OEM designs. Currently the design in amd-pmc is to try every 100us for up to 20ms. However the GPU driver which also communicates with the SMU using a mailbox register which the driver polls every 1us for up to 2000ms. In the GPU driver this was increased by commit 055162645a40 ("drm/amd/pm: increase time out value when sending msg to SMU") Increase the maximum timeout used by amd-pmc to 2000ms to match this behavior. This has been shown to improve the stability for machines that randomly have failures. Cc: stable@kernel.org Reported-by: Julian Sikorski BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629 Signed-off-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210914020115.655-1-mario.limonciello@amd.com Signed-off-by: Hans de Goede --- drivers/platform/x86/amd-pmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 3481479a2942..d6a7c896ac86 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -71,7 +71,7 @@ #define AMD_CPU_ID_YC 0x14B5 #define PMC_MSG_DELAY_MIN_US 100 -#define RESPONSE_REGISTER_LOOP_MAX 200 +#define RESPONSE_REGISTER_LOOP_MAX 20000 #define SOC_SUBSYSTEM_IP_MAX 12 #define DELAY_MIN_US 2000 -- cgit v1.2.3 From b43446b4f5ffb70cd7459728ec805a9d3438b8e2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 20 Aug 2021 10:17:31 +0200 Subject: arm64: dts: arm: align watchdog and mmc node names with dtschema Align the watchdog and mmc device node names with the schema to fix warnings like: mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$' wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$' Link: https://lore.kernel.org/r/20210820081733.83976-1-krzysztof.kozlowski@canonical.com Acked-by: Liviu Dudau Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 4 ++-- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 40d95c58b55e..f45c912b2806 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -218,7 +218,7 @@ }; }; - mmci@50000 { + mmc@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <5>; @@ -246,7 +246,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - wdt@f0000 { + watchdog@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x10000>; interrupts = <7>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 4c4a381d2c75..7260bcf4b2ab 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -130,7 +130,7 @@ clock-names = "apb_pclk"; }; - mmci@50000 { + mmc@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9>, <10>; @@ -190,7 +190,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@f0000 { + watchdog@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; -- cgit v1.2.3 From 5f741ef384d3cfb9967029d335a3f7c45f4ffc55 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 20 Aug 2021 10:17:32 +0200 Subject: ARM: dts: arm: align watchdog and mmc node names with dtschema Align the watchdog and mmc device node names with the schema to fix warnings like: mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$' wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$' Link: https://lore.kernel.org/r/20210820081733.83976-2-krzysztof.kozlowski@canonical.com Acked-by: Liviu Dudau Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 2ad9fd7c94ec..bcb3f581977a 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -215,7 +215,7 @@ clock-names = "apb_pclk"; }; - mmci@50000 { + mmc@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9>, <10>; @@ -275,7 +275,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@f0000 { + watchdog@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; -- cgit v1.2.3 From 217cb530a30a157153878c89cfee0764a66378ec Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 20 Aug 2021 10:17:33 +0200 Subject: arm64: dts: arm: drop unused interrupt-names in MHU The arm,mhu bindings and driver do not define interrupt-names, so drop the property to fix warnings: arch/arm64/boot/dts/arm/juno-r2.dt.yaml: mhu@2b1f0000: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20210820081733.83976-3-krzysztof.kozlowski@canonical.com Acked-by: Liviu Dudau Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8e7a66943b01..e4fea639731e 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -27,8 +27,6 @@ reg = <0x0 0x2b1f0000 0x0 0x1000>; interrupts = , ; - interrupt-names = "mhu_lpri_rx", - "mhu_hpri_rx"; #mbox-cells = <1>; clocks = <&soc_refclk100mhz>; clock-names = "apb_pclk"; -- cgit v1.2.3 From 55c71dc69ecb328e6212ac5154099c4230d0b83f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 19 Aug 2021 13:42:37 -0500 Subject: arm: dts: vexpress: Drop unused properties from motherboard node Drop the '#interrupt-cells' property in the motherboard node which has no effect as the node is neither an interrupt-controller or interrupt-map (that's in the parent node). Drop 'model' as it is not used by software nor documented. Drop 'arm,v2m-memory-map' as it is not used by software. The purpose was to describe which memory map, but that's all described by the DT already. Link: https://lore.kernel.org/r/20210819184239.1192395-4-robh@kernel.org Cc: Andre Przywara Cc: Sudeep Holla Cc: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Rob Herring Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 3 --- arch/arm/boot/dts/vexpress-v2m.dtsi | 2 -- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 1 - arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 3 --- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 2 -- 5 files changed, 11 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index bcb3f581977a..f58e8e17120d 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -102,14 +102,11 @@ bus@8000000 { motherboard-bus { - model = "V2M-P1"; arm,hbi = <0x190>; arm,vexpress,site = <0>; - arm,v2m-memory-map = "rs1"; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - #interrupt-cells = <1>; ranges; nor_flash: flash@0 { diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index ec13ceb9ed36..fb8ca984ce1f 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -21,13 +21,11 @@ / { bus@4000000 { motherboard { - model = "V2M-P1"; arm,hbi = <0x190>; arm,vexpress,site = <0>; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - #interrupt-cells = <1>; ranges; flash@0,00000000 { diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 05ae893d1b2e..fbf13f7c2baf 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -115,7 +115,6 @@ bus@8000000 { compatible = "arm,vexpress,v2m-p1", "simple-bus"; - arm,v2m-memory-map = "rs1"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index f45c912b2806..4e124d955c8e 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -96,12 +96,9 @@ compatible = "arm,vexpress,v2p-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - #interrupt-cells = <1>; ranges; - model = "V2M-Juno"; arm,hbi = <0x252>; arm,vexpress,site = <0>; - arm,v2m-memory-map = "rs1"; flash@0 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 7260bcf4b2ab..d4c552830743 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -78,11 +78,9 @@ bus@8000000 { motherboard-bus { - arm,v2m-memory-map = "rs1"; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - #interrupt-cells = <1>; ranges; flash@0 { -- cgit v1.2.3 From 2e9edc07df2ec6f835222151fa4e536e9e54856a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 19 Aug 2021 13:42:38 -0500 Subject: arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'. Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org Cc: Andre Przywara Cc: Sudeep Holla Cc: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Rob Herring Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m.dtsi | 2 +- arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index fb8ca984ce1f..0819d112de12 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -19,7 +19,7 @@ */ / { - bus@4000000 { + bus@40000000 { motherboard { arm,hbi = <0x190>; arm,vexpress,site = <0>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 4c5847955856..1317f0f58d53 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -295,7 +295,7 @@ }; }; - smb: bus@4000000 { + smb: bus@40000000 { compatible = "simple-bus"; #address-cells = <2>; -- cgit v1.2.3 From f7a28df7db84eb3410e9eca37832efa5aed93338 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Aug 2021 21:39:54 +0300 Subject: iio: dac: ti-dac5571: fix an error code in probe() If we have an unexpected number of channels then return -EINVAL instead of returning success. Fixes: df38a4a72a3b ("iio: dac: add TI DAC5571 family support") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210816183954.GB2068@kili Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ti-dac5571.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c index 2a5ba1b08a1d..546a4cf6c5ef 100644 --- a/drivers/iio/dac/ti-dac5571.c +++ b/drivers/iio/dac/ti-dac5571.c @@ -350,6 +350,7 @@ static int dac5571_probe(struct i2c_client *client, data->dac5571_pwrdwn = dac5571_pwrdwn_quad; break; default: + ret = -EINVAL; goto err; } -- cgit v1.2.3 From 9033c7a357481fb5bcc1737bafa4aec572dca5c6 Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Tue, 17 Aug 2021 14:43:36 +0200 Subject: iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed fxls8962af_fifo_flush() will return the samples flushed. So return IRQ_NONE only if an error is returned. Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling") Signed-off-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20210817124336.1672169-1-sean@geanix.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/fxls8962af-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c index 0019f1ea7df2..f41db9e0249a 100644 --- a/drivers/iio/accel/fxls8962af-core.c +++ b/drivers/iio/accel/fxls8962af-core.c @@ -738,7 +738,7 @@ static irqreturn_t fxls8962af_interrupt(int irq, void *p) if (reg & FXLS8962AF_INT_STATUS_SRC_BUF) { ret = fxls8962af_fifo_flush(indio_dev); - if (ret) + if (ret < 0) return IRQ_NONE; return IRQ_HANDLED; -- cgit v1.2.3 From 9909a395e9807aa79145c9289d0c13d0133359a2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 17 Aug 2021 18:21:11 +0100 Subject: iio: adc: rzg2l_adc: Fix -EBUSY timeout error return Currently when a timeout occurs in rzg2l_adc_hw_init the error -EBUSY is assigned to ret but the error code is used as the function is hard-coded to return 0. The variable ret is 0 before entering the while-loop hence the fix is just to return ret at the end of the function to return the success 0 or -EBUSY return code. Addresses-Coverity: ("Unused value") Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter") Signed-off-by: Colin Ian King Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210817172111.495897-1-colin.king@canonical.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rzg2l_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c index 9996d5eef289..868b183e75ea 100644 --- a/drivers/iio/adc/rzg2l_adc.c +++ b/drivers/iio/adc/rzg2l_adc.c @@ -401,7 +401,7 @@ static int rzg2l_adc_hw_init(struct rzg2l_adc *adc) exit_hw_init: clk_disable_unprepare(adc->pclk); - return 0; + return ret; } static void rzg2l_adc_pm_runtime_disable(void *data) -- cgit v1.2.3 From bbcf40816b547b3c37af49168950491d20d81ce1 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 21 Aug 2021 12:37:24 +0200 Subject: iio: adc128s052: Fix the error handling path of 'adc128_probe()' A successful 'regulator_enable()' call should be balanced by a corresponding 'regulator_disable()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 913b86468674 ("iio: adc: Add TI ADC128S052") Signed-off-by: Christophe JAILLET Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/85189f1cfcf6f5f7b42d8730966f2a074b07b5f5.1629542160.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-adc128s052.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c index 3143f35a6509..83c1ae07b3e9 100644 --- a/drivers/iio/adc/ti-adc128s052.c +++ b/drivers/iio/adc/ti-adc128s052.c @@ -171,7 +171,13 @@ static int adc128_probe(struct spi_device *spi) mutex_init(&adc->lock); ret = iio_device_register(indio_dev); + if (ret) + goto err_disable_regulator; + return 0; + +err_disable_regulator: + regulator_disable(adc->reg); return ret; } -- cgit v1.2.3 From 732ae19ee8f58ecaf30cbc1bbbda5cbee6a45043 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 18 Aug 2021 13:11:24 +0200 Subject: iio: adc: max1027: Fix wrong shift with 12-bit devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 10-bit devices must shift the value twice. This is not needed anymore on 12-bit devices. Fixes: ae47d009b508 ("iio: adc: max1027: Introduce 12-bit devices support") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20210818111139.330636-2-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max1027.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c index 655ab02d03d8..4a42d140a4b0 100644 --- a/drivers/iio/adc/max1027.c +++ b/drivers/iio/adc/max1027.c @@ -103,7 +103,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); .sign = 'u', \ .realbits = depth, \ .storagebits = 16, \ - .shift = 2, \ + .shift = (depth == 10) ? 2 : 0, \ .endianness = IIO_BE, \ }, \ } -- cgit v1.2.3 From f0cb5fed37ab37f6a6c5463c5fd39b58a45670c8 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 18 Aug 2021 13:11:25 +0200 Subject: iio: adc: max1027: Fix the number of max1X31 channels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The macro MAX1X29_CHANNELS() already calls MAX1X27_CHANNELS(). Calling MAX1X27_CHANNELS() before MAX1X29_CHANNELS() in the definition of MAX1X31_CHANNELS() declares the first 8 channels twice. So drop this extra call from the MAX1X31 channels list definition. Fixes: 7af5257d8427 ("iio: adc: max1027: Prepare the introduction of different resolutions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20210818111139.330636-3-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max1027.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c index 4a42d140a4b0..b753658bb41e 100644 --- a/drivers/iio/adc/max1027.c +++ b/drivers/iio/adc/max1027.c @@ -142,7 +142,6 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); MAX1027_V_CHAN(11, depth) #define MAX1X31_CHANNELS(depth) \ - MAX1X27_CHANNELS(depth), \ MAX1X29_CHANNELS(depth), \ MAX1027_V_CHAN(12, depth), \ MAX1027_V_CHAN(13, depth), \ -- cgit v1.2.3 From fa002b364981b49d04e818abbc06fd47a5ec7b51 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 19 Aug 2021 21:24:16 +0800 Subject: iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume() Add clk_disable_unprepare() on error path in rzg2l_adc_pm_runtime_resume(). Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210819132416.175644-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rzg2l_adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c index 868b183e75ea..32fbf57c362f 100644 --- a/drivers/iio/adc/rzg2l_adc.c +++ b/drivers/iio/adc/rzg2l_adc.c @@ -570,8 +570,10 @@ static int __maybe_unused rzg2l_adc_pm_runtime_resume(struct device *dev) return ret; ret = clk_prepare_enable(adc->adclk); - if (ret) + if (ret) { + clk_disable_unprepare(adc->pclk); return ret; + } rzg2l_adc_pwr(adc, true); -- cgit v1.2.3 From eb795cd97365a3d3d9da3926d234a7bc32a3bb15 Mon Sep 17 00:00:00 2001 From: Billy Tsai Date: Tue, 31 Aug 2021 15:14:44 +0800 Subject: iio: adc: aspeed: set driver data when adc probe. Fix the issue when adc remove will get the null driver data. Fixed: commit 573803234e72 ("iio: Aspeed ADC") Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20210831071458.2334-2-billy_tsai@aspeedtech.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/aspeed_adc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c index 19efaa41bc34..34ec0c28b2df 100644 --- a/drivers/iio/adc/aspeed_adc.c +++ b/drivers/iio/adc/aspeed_adc.c @@ -183,6 +183,7 @@ static int aspeed_adc_probe(struct platform_device *pdev) data = iio_priv(indio_dev); data->dev = &pdev->dev; + platform_set_drvdata(pdev, indio_dev); data->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(data->base)) -- cgit v1.2.3 From 89a86da5cb8e0ee153111fb68a719d31582c206b Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Mon, 6 Sep 2021 09:56:28 +0300 Subject: iio: adc: ad7192: Add IRQ flag IRQ type in ad_sigma_delta_info struct was missing. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7192 datasheet: "The DOUT/RDY falling edge can be used as an interrupt to a processor," Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici Cc: Link: https://lore.kernel.org/r/20210906065630.16325-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7192.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index ee8ed9481025..2121a812b0c3 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -293,6 +293,7 @@ static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), + .irq_flags = IRQF_TRIGGER_FALLING, }; static const struct ad_sd_calib_data ad7192_calib_arr[8] = { -- cgit v1.2.3 From e081102f3077aa716974ccebec97003c890d5641 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Mon, 6 Sep 2021 09:56:29 +0300 Subject: iio: adc: ad7780: Fix IRQ flag Correct IRQ flag here is falling. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7780 datasheet: " The DOUT/Figure 22 RDY falling edge can be used as an interrupt to a processor" Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici Cc: Link: https://lore.kernel.org/r/20210906065630.16325-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c index 42bb952f4738..b6e8c8abf6f4 100644 --- a/drivers/iio/adc/ad7780.c +++ b/drivers/iio/adc/ad7780.c @@ -203,7 +203,7 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = { .set_mode = ad7780_set_mode, .postprocess_sample = ad7780_postprocess_sample, .has_registers = false, - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, }; #define _AD7780_CHANNEL(_bits, _wordsize, _mask_all) \ -- cgit v1.2.3 From 1a913270e57a8e7f1e3789802f1f64e6d0654626 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Mon, 6 Sep 2021 09:56:30 +0300 Subject: iio: adc: ad7793: Fix IRQ flag In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7793 datasheet: " The DOUT/RDY falling edge can be used as an interrupt to a processor" Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici Cc: Link: https://lore.kernel.org/r/20210906065630.16325-4-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index ef3e2d3ecb0c..0e7ab3fb072a 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -206,7 +206,7 @@ static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, }; static const struct ad_sd_calib_data ad7793_calib_arr[6] = { -- cgit v1.2.3 From d53c66594dc7606b191bb2976901a691d291a316 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Mon, 30 Aug 2021 15:02:09 +0300 Subject: habanalabs: fix potential race in interrupt wait ioctl We have a potential race where a user interrupt can be received in between user thread value comparison and before request was added to wait list. This means that if no consecutive interrupt will be received, user thread will timeout and fail. The solution is to add the request to wait list before we perform the comparison. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- .../misc/habanalabs/common/command_submission.c | 35 +++++++++++++--------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 7b0516cf808b..9a8b9191c28c 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -2740,10 +2740,20 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx, else interrupt = &hdev->user_interrupt[interrupt_offset]; + /* Add pending user interrupt to relevant list for the interrupt + * handler to monitor + */ + spin_lock_irqsave(&interrupt->wait_list_lock, flags); + list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head); + spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + + /* We check for completion value as interrupt could have been received + * before we added the node to the wait list + */ if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) { dev_err(hdev->dev, "Failed to copy completion value from user\n"); rc = -EFAULT; - goto free_fence; + goto remove_pending_user_interrupt; } if (completion_value >= target_value) @@ -2752,14 +2762,7 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx, *status = CS_WAIT_STATUS_BUSY; if (!timeout_us || (*status == CS_WAIT_STATUS_COMPLETED)) - goto free_fence; - - /* Add pending user interrupt to relevant list for the interrupt - * handler to monitor - */ - spin_lock_irqsave(&interrupt->wait_list_lock, flags); - list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head); - spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + goto remove_pending_user_interrupt; wait_again: /* Wait for interrupt handler to signal completion */ @@ -2770,6 +2773,15 @@ wait_again: * If comparison fails, keep waiting until timeout expires */ if (completion_rc > 0) { + spin_lock_irqsave(&interrupt->wait_list_lock, flags); + /* reinit_completion must be called before we check for user + * completion value, otherwise, if interrupt is received after + * the comparison and before the next wait_for_completion, + * we will reach timeout and fail + */ + reinit_completion(&pend->fence.completion); + spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) { dev_err(hdev->dev, "Failed to copy completion value from user\n"); rc = -EFAULT; @@ -2780,11 +2792,7 @@ wait_again: if (completion_value >= target_value) { *status = CS_WAIT_STATUS_COMPLETED; } else { - spin_lock_irqsave(&interrupt->wait_list_lock, flags); - reinit_completion(&pend->fence.completion); timeout = completion_rc; - - spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); goto wait_again; } } else if (completion_rc == -ERESTARTSYS) { @@ -2802,7 +2810,6 @@ remove_pending_user_interrupt: list_del(&pend->wait_list_node); spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); -free_fence: kfree(pend); hl_ctx_put(ctx); -- cgit v1.2.3 From beb71ee36e4de93c2b21d916fb94558333d99974 Mon Sep 17 00:00:00 2001 From: farah kassabri Date: Wed, 1 Sep 2021 15:48:04 +0300 Subject: habanalabs: fix kernel OOPs related to staged cs In case of single staged cs with both first/last indications set, we reach a scenario where in cs_release function flow we don't cancel the TDR work before freeing the cs memory, this lead to kernel OOPs since when the timer expires the work pointer will be freed already. In addition treat wait encaps cs "not found" handle as "OK" for the user in order to keep the user interface for both legacy and encpas signal/wait features the same. Signed-off-by: farah kassabri Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 9a8b9191c28c..deb080830ecb 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -405,7 +405,7 @@ static void staged_cs_put(struct hl_device *hdev, struct hl_cs *cs) static void cs_handle_tdr(struct hl_device *hdev, struct hl_cs *cs) { bool next_entry_found = false; - struct hl_cs *next; + struct hl_cs *next, *first_cs; if (!cs_needs_timeout(cs)) return; @@ -415,9 +415,16 @@ static void cs_handle_tdr(struct hl_device *hdev, struct hl_cs *cs) /* We need to handle tdr only once for the complete staged submission. * Hence, we choose the CS that reaches this function first which is * the CS marked as 'staged_last'. + * In case single staged cs was submitted which has both first and last + * indications, then "cs_find_first" below will return NULL, since we + * removed the cs node from the list before getting here, + * in such cases just continue with the cs to cancel it's TDR work. */ - if (cs->staged_cs && cs->staged_last) - cs = hl_staged_cs_find_first(hdev, cs->staged_sequence); + if (cs->staged_cs && cs->staged_last) { + first_cs = hl_staged_cs_find_first(hdev, cs->staged_sequence); + if (first_cs) + cs = first_cs; + } spin_unlock(&hdev->cs_mirror_lock); @@ -2026,9 +2033,10 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type, spin_unlock(&ctx->sig_mgr.lock); if (!handle_found) { - dev_err(hdev->dev, "Cannot find encapsulated signals handle for seq 0x%llx\n", + /* treat as signal CS already finished */ + dev_dbg(hdev->dev, "Cannot find encapsulated signals handle for seq 0x%llx\n", signal_seq); - rc = -EINVAL; + rc = 0; goto free_cs_chunk_array; } -- cgit v1.2.3 From 3e08f157c2587fc7ada93abed41aae19bcbf8a6b Mon Sep 17 00:00:00 2001 From: Omer Shpigelman Date: Wed, 30 Dec 2020 08:05:18 +0200 Subject: habanalabs/gaudi: use direct MSI in single mode Due to FLR scenario when running inside a VM, we must not use indirect MSI because it might cause some issues on VM destroy. In a VM we use single MSI mode in contrary to multi MSI mode which is used in bare-metal. Hence direct MSI should be used in single MSI mode only. Signed-off-by: Omer Shpigelman Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 9 ++++++--- drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 383865be3c2c..5249f8fd4d59 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -5802,6 +5802,7 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, { struct gaudi_device *gaudi = hdev->asic_specific; struct packet_msg_prot *cq_pkt; + u64 msi_addr; u32 tmp; cq_pkt = kernel_address + len - (sizeof(struct packet_msg_prot) * 2); @@ -5823,10 +5824,12 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, cq_pkt->ctl = cpu_to_le32(tmp); cq_pkt->value = cpu_to_le32(1); - if (!gaudi->multi_msi_mode) - msi_vec = 0; + if (gaudi->multi_msi_mode) + msi_addr = mmPCIE_MSI_INTR_0 + msi_vec * 4; + else + msi_addr = mmPCIE_CORE_MSI_REQ; - cq_pkt->addr = cpu_to_le64(CFG_BASE + mmPCIE_MSI_INTR_0 + msi_vec * 4); + cq_pkt->addr = cpu_to_le64(CFG_BASE + msi_addr); } static void gaudi_update_eq_ci(struct hl_device *hdev, u32 val) diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h index ffdfbd9b3220..1a6576666794 100644 --- a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h +++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h @@ -308,6 +308,8 @@ #define mmPCIE_AUX_FLR_CTRL 0xC07394 #define mmPCIE_AUX_DBI 0xC07490 +#define mmPCIE_CORE_MSI_REQ 0xC04100 + #define mmPSOC_PCI_PLL_NR 0xC72100 #define mmSRAM_W_PLL_NR 0x4C8100 #define mmPSOC_HBM_PLL_NR 0xC74100 -- cgit v1.2.3 From d09ff62c820b5950ab9958e77620a8498efe9386 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Thu, 2 Sep 2021 09:47:53 +0300 Subject: habanalabs: fail collective wait when not supported As collective wait operation is required only when NIC ports are available, we disable the option to submit a CS in case all the ports are disabled, which is the current situation in the upstream driver. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index deb080830ecb..5b7de857fbc1 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -1995,6 +1995,15 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type, goto free_cs_chunk_array; } + if (!hdev->nic_ports_mask) { + atomic64_inc(&ctx->cs_counters.validation_drop_cnt); + atomic64_inc(&cntr->validation_drop_cnt); + dev_err(hdev->dev, + "Collective operations not supported when NIC ports are disabled"); + rc = -EINVAL; + goto free_cs_chunk_array; + } + collective_engine_id = chunk->collective_engine_id; } -- cgit v1.2.3 From fcffb759f7d53b8e6c6e91804eec994205099dd3 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 3 Sep 2021 09:02:03 +0100 Subject: habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK" There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 5249f8fd4d59..14da87b38e83 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -395,7 +395,7 @@ static struct hl_hw_obj_name_entry gaudi_so_id_to_str[] = { static struct hl_hw_obj_name_entry gaudi_monitor_id_to_str[] = { { .id = 200, .name = "MON_OBJ_DMA_DOWN_FEEDBACK_RESET" }, - { .id = 201, .name = "MON_OBJ_DMA_UP_FEADBACK_RESET" }, + { .id = 201, .name = "MON_OBJ_DMA_UP_FEEDBACK_RESET" }, { .id = 203, .name = "MON_OBJ_DRAM_TO_SRAM_QUEUE_FENCE" }, { .id = 204, .name = "MON_OBJ_TPC_0_CLK_GATE" }, { .id = 205, .name = "MON_OBJ_TPC_1_CLK_GATE" }, -- cgit v1.2.3 From 0a5ff77bf0a94468d541735f919a633f167787e9 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 12 Sep 2021 10:25:49 +0300 Subject: habanalabs/gaudi: fix LBW RR configuration Couple of fixes to the LBW RR configuration: 1. Add missing configuration of the SM RR registers in the DMA_IF. 2. Remove HBW range that doesn't belong. 3. Add entire gap + DBG area, from end of TPC7 to end of entire DBG space. Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi_security.c | 115 ++++++++++++++----------- 1 file changed, 67 insertions(+), 48 deletions(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c index cb265c00cf73..25ac87cebd45 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi_security.c +++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c @@ -8,16 +8,21 @@ #include "gaudiP.h" #include "../include/gaudi/asic_reg/gaudi_regs.h" -#define GAUDI_NUMBER_OF_RR_REGS 24 -#define GAUDI_NUMBER_OF_LBW_RANGES 12 +#define GAUDI_NUMBER_OF_LBW_RR_REGS 28 +#define GAUDI_NUMBER_OF_HBW_RR_REGS 24 +#define GAUDI_NUMBER_OF_LBW_RANGES 10 -static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_WPROT, mmDMA_IF_W_S_DMA0_HIT_WPROT, mmDMA_IF_W_S_DMA1_HIT_WPROT, + mmDMA_IF_E_S_SOB_HIT_WPROT, mmDMA_IF_E_S_DMA0_HIT_WPROT, mmDMA_IF_E_S_DMA1_HIT_WPROT, + mmDMA_IF_W_N_SOB_HIT_WPROT, mmDMA_IF_W_N_DMA0_HIT_WPROT, mmDMA_IF_W_N_DMA1_HIT_WPROT, + mmDMA_IF_E_N_SOB_HIT_WPROT, mmDMA_IF_E_N_DMA0_HIT_WPROT, mmDMA_IF_E_N_DMA1_HIT_WPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AW, @@ -38,13 +43,17 @@ static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AW, }; -static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_RPROT, mmDMA_IF_W_S_DMA0_HIT_RPROT, mmDMA_IF_W_S_DMA1_HIT_RPROT, + mmDMA_IF_E_S_SOB_HIT_RPROT, mmDMA_IF_E_S_DMA0_HIT_RPROT, mmDMA_IF_E_S_DMA1_HIT_RPROT, + mmDMA_IF_W_N_SOB_HIT_RPROT, mmDMA_IF_W_N_DMA0_HIT_RPROT, mmDMA_IF_W_N_DMA1_HIT_RPROT, + mmDMA_IF_E_N_SOB_HIT_RPROT, mmDMA_IF_E_N_DMA0_HIT_RPROT, mmDMA_IF_E_N_DMA1_HIT_RPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AR, @@ -65,13 +74,17 @@ static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AR, }; -static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_WPROT_0, mmDMA_IF_W_S_DMA0_MIN_WPROT_0, mmDMA_IF_W_S_DMA1_MIN_WPROT_0, + mmDMA_IF_E_S_SOB_MIN_WPROT_0, mmDMA_IF_E_S_DMA0_MIN_WPROT_0, mmDMA_IF_E_S_DMA1_MIN_WPROT_0, + mmDMA_IF_W_N_SOB_MIN_WPROT_0, mmDMA_IF_W_N_DMA0_MIN_WPROT_0, mmDMA_IF_W_N_DMA1_MIN_WPROT_0, + mmDMA_IF_E_N_SOB_MIN_WPROT_0, mmDMA_IF_E_N_DMA0_MIN_WPROT_0, mmDMA_IF_E_N_DMA1_MIN_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AW_0, @@ -92,13 +105,17 @@ static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AW_0, }; -static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_WPROT_0, mmDMA_IF_W_S_DMA0_MAX_WPROT_0, mmDMA_IF_W_S_DMA1_MAX_WPROT_0, + mmDMA_IF_E_S_SOB_MAX_WPROT_0, mmDMA_IF_E_S_DMA0_MAX_WPROT_0, mmDMA_IF_E_S_DMA1_MAX_WPROT_0, + mmDMA_IF_W_N_SOB_MAX_WPROT_0, mmDMA_IF_W_N_DMA0_MAX_WPROT_0, mmDMA_IF_W_N_DMA1_MAX_WPROT_0, + mmDMA_IF_E_N_SOB_MAX_WPROT_0, mmDMA_IF_E_N_DMA0_MAX_WPROT_0, mmDMA_IF_E_N_DMA1_MAX_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AW_0, @@ -119,13 +136,17 @@ static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AW_0, }; -static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_RPROT_0, mmDMA_IF_W_S_DMA0_MIN_RPROT_0, mmDMA_IF_W_S_DMA1_MIN_RPROT_0, + mmDMA_IF_E_S_SOB_MIN_RPROT_0, mmDMA_IF_E_S_DMA0_MIN_RPROT_0, mmDMA_IF_E_S_DMA1_MIN_RPROT_0, + mmDMA_IF_W_N_SOB_MIN_RPROT_0, mmDMA_IF_W_N_DMA0_MIN_RPROT_0, mmDMA_IF_W_N_DMA1_MIN_RPROT_0, + mmDMA_IF_E_N_SOB_MIN_RPROT_0, mmDMA_IF_E_N_DMA0_MIN_RPROT_0, mmDMA_IF_E_N_DMA1_MIN_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AR_0, @@ -146,13 +167,17 @@ static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AR_0, }; -static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_RPROT_0, mmDMA_IF_W_S_DMA0_MAX_RPROT_0, mmDMA_IF_W_S_DMA1_MAX_RPROT_0, + mmDMA_IF_E_S_SOB_MAX_RPROT_0, mmDMA_IF_E_S_DMA0_MAX_RPROT_0, mmDMA_IF_E_S_DMA1_MAX_RPROT_0, + mmDMA_IF_W_N_SOB_MAX_RPROT_0, mmDMA_IF_W_N_DMA0_MAX_RPROT_0, mmDMA_IF_W_N_DMA1_MAX_RPROT_0, + mmDMA_IF_E_N_SOB_MAX_RPROT_0, mmDMA_IF_E_N_DMA0_MAX_RPROT_0, mmDMA_IF_E_N_DMA1_MAX_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AR_0, @@ -173,7 +198,7 @@ static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AR_0, }; -static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AW, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AW, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AW, @@ -200,7 +225,7 @@ static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AW }; -static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AR, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AR, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AR, @@ -227,7 +252,7 @@ static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AR }; -static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, @@ -254,7 +279,7 @@ static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AW_0 }; -static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, @@ -281,7 +306,7 @@ static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AW_0 }; -static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, @@ -308,7 +333,7 @@ static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AW_0 }; -static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, @@ -335,7 +360,7 @@ static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_HIGH_AW_0 }; -static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, @@ -362,7 +387,7 @@ static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AR_0 }; -static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, @@ -389,7 +414,7 @@ static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AR_0 }; -static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, @@ -416,7 +441,7 @@ static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AR_0 }; -static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, @@ -12849,50 +12874,44 @@ static void gaudi_init_range_registers_lbw(struct hl_device *hdev) u32 lbw_rng_end[GAUDI_NUMBER_OF_LBW_RANGES]; int i, j; - lbw_rng_start[0] = (0xFBFE0000 & 0x3FFFFFF) - 1; - lbw_rng_end[0] = (0xFBFFF000 & 0x3FFFFFF) + 1; + lbw_rng_start[0] = (0xFC0E8000 & 0x3FFFFFF) - 1; /* 0x000E7FFF */ + lbw_rng_end[0] = (0xFC11FFFF & 0x3FFFFFF) + 1; /* 0x00120000 */ - lbw_rng_start[1] = (0xFC0E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[1] = (0xFC120000 & 0x3FFFFFF) + 1; + lbw_rng_start[1] = (0xFC1E8000 & 0x3FFFFFF) - 1; /* 0x001E7FFF */ + lbw_rng_end[1] = (0xFC48FFFF & 0x3FFFFFF) + 1; /* 0x00490000 */ - lbw_rng_start[2] = (0xFC1E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[2] = (0xFC48FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[2] = (0xFC600000 & 0x3FFFFFF) - 1; /* 0x005FFFFF */ + lbw_rng_end[2] = (0xFCC48FFF & 0x3FFFFFF) + 1; /* 0x00C49000 */ - lbw_rng_start[3] = (0xFC600000 & 0x3FFFFFF) - 1; - lbw_rng_end[3] = (0xFCC48FFF & 0x3FFFFFF) + 1; + lbw_rng_start[3] = (0xFCC4A000 & 0x3FFFFFF) - 1; /* 0x00C49FFF */ + lbw_rng_end[3] = (0xFCCDFFFF & 0x3FFFFFF) + 1; /* 0x00CE0000 */ - lbw_rng_start[4] = (0xFCC4A000 & 0x3FFFFFF) - 1; - lbw_rng_end[4] = (0xFCCDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[4] = (0xFCCE4000 & 0x3FFFFFF) - 1; /* 0x00CE3FFF */ + lbw_rng_end[4] = (0xFCD1FFFF & 0x3FFFFFF) + 1; /* 0x00D20000 */ - lbw_rng_start[5] = (0xFCCE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[5] = (0xFCD1FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[5] = (0xFCD24000 & 0x3FFFFFF) - 1; /* 0x00D23FFF */ + lbw_rng_end[5] = (0xFCD5FFFF & 0x3FFFFFF) + 1; /* 0x00D60000 */ - lbw_rng_start[6] = (0xFCD24000 & 0x3FFFFFF) - 1; - lbw_rng_end[6] = (0xFCD5FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[6] = (0xFCD64000 & 0x3FFFFFF) - 1; /* 0x00D63FFF */ + lbw_rng_end[6] = (0xFCD9FFFF & 0x3FFFFFF) + 1; /* 0x00DA0000 */ - lbw_rng_start[7] = (0xFCD64000 & 0x3FFFFFF) - 1; - lbw_rng_end[7] = (0xFCD9FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[7] = (0xFCDA4000 & 0x3FFFFFF) - 1; /* 0x00DA3FFF */ + lbw_rng_end[7] = (0xFCDDFFFF & 0x3FFFFFF) + 1; /* 0x00DE0000 */ - lbw_rng_start[8] = (0xFCDA4000 & 0x3FFFFFF) - 1; - lbw_rng_end[8] = (0xFCDDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[8] = (0xFCDE4000 & 0x3FFFFFF) - 1; /* 0x00DE3FFF */ + lbw_rng_end[8] = (0xFCE05FFF & 0x3FFFFFF) + 1; /* 0x00E06000 */ - lbw_rng_start[9] = (0xFCDE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[9] = (0xFCE05FFF & 0x3FFFFFF) + 1; + lbw_rng_start[9] = (0xFCFC9000 & 0x3FFFFFF) - 1; /* 0x00FC8FFF */ + lbw_rng_end[9] = (0xFFFFFFFE & 0x3FFFFFF) + 1; /* 0x03FFFFFF */ - lbw_rng_start[10] = (0xFEC43000 & 0x3FFFFFF) - 1; - lbw_rng_end[10] = (0xFEC43FFF & 0x3FFFFFF) + 1; - - lbw_rng_start[11] = (0xFE484000 & 0x3FFFFFF) - 1; - lbw_rng_end[11] = (0xFE484FFF & 0x3FFFFFF) + 1; - - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) { WREG32(gaudi_rr_lbw_hit_aw_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); WREG32(gaudi_rr_lbw_hit_ar_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); } - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) for (j = 0 ; j < GAUDI_NUMBER_OF_LBW_RANGES ; j++) { WREG32(gaudi_rr_lbw_min_aw_regs[i] + (j << 2), lbw_rng_start[j]); @@ -12939,12 +12958,12 @@ static void gaudi_init_range_registers_hbw(struct hl_device *hdev) * 6th range is the host */ - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_hit_aw_regs[i], 0x1F); WREG32(gaudi_rr_hbw_hit_ar_regs[i], 0x1D); } - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_base_low_aw_regs[i], dram_addr_lo); WREG32(gaudi_rr_hbw_base_low_ar_regs[i], dram_addr_lo); -- cgit v1.2.3 From 3d3200ae167ba048a29e0c815987a3fdc90fc8d2 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Thu, 9 Sep 2021 09:56:37 +0300 Subject: habanalabs: rate limit multi CS completion errors As user can send wrong arguments to multi CS API, we rate limit the amount of errors dumped to dmesg, in addition we change the severity to warning. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 5b7de857fbc1..a4ed91ed991d 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -2630,7 +2630,8 @@ static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data) * completed after the poll function. */ if (!mcs_data.completion_bitmap) { - dev_err(hdev->dev, "Multi-CS got completion on wait but no CS completed\n"); + dev_warn_ratelimited(hdev->dev, + "Multi-CS got completion on wait but no CS completed\n"); rc = -EFAULT; } } -- cgit v1.2.3 From 42254c2a4991b98ca3f86040a1a7b7b32a0c8c4a Mon Sep 17 00:00:00 2001 From: farah kassabri Date: Sun, 12 Sep 2021 14:30:35 +0300 Subject: habanalabs: fix wait offset handling Add handling for case where the user doesn't set wait offset, and keeps it as 0. In such a case the driver will decrement one from this zero value which will cause the code to wait for wrong number of signals. The solution is to treat this case as in legacy wait cs, and wait for the next signal. Signed-off-by: farah kassabri Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/hw_queue.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c index 76b7de8f1406..0743319b10c7 100644 --- a/drivers/misc/habanalabs/common/hw_queue.c +++ b/drivers/misc/habanalabs/common/hw_queue.c @@ -437,6 +437,7 @@ void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev, struct hl_cs_compl *cs_cmpl) { struct hl_cs_encaps_sig_handle *handle = cs->encaps_sig_hdl; + u32 offset = 0; cs_cmpl->hw_sob = handle->hw_sob; @@ -446,9 +447,13 @@ void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev, * set offset 1 for example he mean to wait only for the first * signal only, which will be pre_sob_val, and if he set offset 2 * then the value required is (pre_sob_val + 1) and so on... + * if user set wait offset to 0, then treat it as legacy wait cs, + * wait for the next signal. */ - cs_cmpl->sob_val = handle->pre_sob_val + - (job->encaps_sig_wait_offset - 1); + if (job->encaps_sig_wait_offset) + offset = job->encaps_sig_wait_offset - 1; + + cs_cmpl->sob_val = handle->pre_sob_val + offset; } static int init_wait_cs(struct hl_device *hdev, struct hl_cs *cs, -- cgit v1.2.3 From c8fee41957f036cbc8e840bd91e2087731df7f7e Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Sun, 12 Sep 2021 15:49:00 +0300 Subject: habanalabs: expose a single cs seq in staged submissions Staged submission consists of multiple command submissions. In order to be explicit, driver should return a single cs sequence for every cs in the submission, or else user may try to wait on an internal CS rather than waiting for the whole submission. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index a4ed91ed991d..91b57544f7c6 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -1295,6 +1295,12 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks, if (rc) goto free_cs_object; + /* If this is a staged submission we must return the staged sequence + * rather than the internal CS sequence + */ + if (cs->staged_cs) + *cs_seq = cs->staged_sequence; + /* Validate ALL the CS chunks before submitting the CS */ for (i = 0 ; i < num_chunks ; i++) { struct hl_cs_chunk *chunk = &cs_chunk_array[i]; -- cgit v1.2.3 From cf8dd57bd0d62133e4ed9e1ad83af994fac34da5 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 15 Jun 2021 10:44:33 +0930 Subject: ARM: config: multi v7: Enable dependancies Some drivers have not been built as they gained dependencies in kconfig but those dependencies were not added to the defconfig. The MSM pinctrl drivers fell out of the defconfig as of commit be117ca32261 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a selected config"). Add PINCTRL_MSM so these stay enabled. EDAC depends on RAS, so enable it to ensure the EDAC drivers stay enabled. Signed-off-by: Joel Stanley Reviewed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ba67c4717dcc..09ddaec97bcb 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -456,6 +456,7 @@ CONFIG_PINCTRL_STMFX=y CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_OWL=y CONFIG_PINCTRL_S500=y +CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -1122,6 +1123,7 @@ CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m +CONFIG_RAS=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_SUNXI_SID=y -- cgit v1.2.3 From 8c1768967e2733d55abf449d8abd6f1915ba3539 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 15 Jun 2021 10:44:34 +0930 Subject: ARM: config: mutli v7: Reenable FB dependency DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM was enabled. In commit f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") the select was replaced with a depends on FB, disabling the drivers that depended on it. Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and VIDEO_VIVID. It must be set to y and not a module as the test driver VIDEO_VIVID requires it to be built in. Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com Signed-off-by: Joel Stanley Reviewed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 09ddaec97bcb..b4f74454f20f 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -726,6 +726,7 @@ CONFIG_DRM_PL111=m CONFIG_DRM_LIMA=m CONFIG_DRM_PANFROST=m CONFIG_DRM_ASPEED_GFX=m +CONFIG_FB=y CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y -- cgit v1.2.3 From 1605de1b3ca66e3eddbca4b3c353c13c26476fe2 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 Aug 2021 16:19:12 +0300 Subject: ARM: at91: pm: do not panic if ram controllers are not enabled In case PM is enabled but there is no RAM controller information in DT the code will panic. Avoid such scenarios by not initializing platform specific PM code in case RAM controller is not provided via DT. Reported-by: Eugen Hristev Fixes: 827de1f123ba0 ("ARM: at91: remove at91_dt_initialize and machine init_early()") Fixes: 892e1f4a3ae58 ("ARM: at91: pm: add sama7g5 ddr phy controller") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com --- arch/arm/mach-at91/pm.c | 78 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 62 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index d6cfe7c4bb00..d92afca64b49 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -589,18 +589,22 @@ static const struct of_device_id ramc_phy_ids[] __initconst = { { /* Sentinel. */ }, }; -static __init void at91_dt_ramc(bool phy_mandatory) +static __init int at91_dt_ramc(bool phy_mandatory) { struct device_node *np; const struct of_device_id *of_id; int idx = 0; void *standby = NULL; const struct ramc_info *ramc; + int ret; for_each_matching_node_and_match(np, ramc_ids, &of_id) { soc_pm.data.ramc[idx] = of_iomap(np, 0); - if (!soc_pm.data.ramc[idx]) - panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); + if (!soc_pm.data.ramc[idx]) { + pr_err("unable to map ramc[%d] cpu registers\n", idx); + ret = -ENOMEM; + goto unmap_ramc; + } ramc = of_id->data; if (ramc) { @@ -612,25 +616,42 @@ static __init void at91_dt_ramc(bool phy_mandatory) idx++; } - if (!idx) - panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); + if (!idx) { + pr_err("unable to find compatible ram controller node in dtb\n"); + ret = -ENODEV; + goto unmap_ramc; + } /* Lookup for DDR PHY node, if any. */ for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) { soc_pm.data.ramc_phy = of_iomap(np, 0); - if (!soc_pm.data.ramc_phy) - panic(pr_fmt("unable to map ramc phy cpu registers\n")); + if (!soc_pm.data.ramc_phy) { + pr_err("unable to map ramc phy cpu registers\n"); + ret = -ENOMEM; + goto unmap_ramc; + } } - if (phy_mandatory && !soc_pm.data.ramc_phy) - panic(pr_fmt("DDR PHY is mandatory!\n")); + if (phy_mandatory && !soc_pm.data.ramc_phy) { + pr_err("DDR PHY is mandatory!\n"); + ret = -ENODEV; + goto unmap_ramc; + } if (!standby) { pr_warn("ramc no standby function available\n"); - return; + return 0; } at91_cpuidle_device.dev.platform_data = standby; + + return 0; + +unmap_ramc: + while (idx) + iounmap(soc_pm.data.ramc[--idx]); + + return ret; } static void at91rm9200_idle(void) @@ -1017,6 +1038,8 @@ static void __init at91_pm_init(void (*pm_idle)(void)) void __init at91rm9200_pm_init(void) { + int ret; + if (!IS_ENABLED(CONFIG_SOC_AT91RM9200)) return; @@ -1028,7 +1051,9 @@ void __init at91rm9200_pm_init(void) soc_pm.data.standby_mode = AT91_PM_STANDBY; soc_pm.data.suspend_mode = AT91_PM_ULP0; - at91_dt_ramc(false); + ret = at91_dt_ramc(false); + if (ret) + return; /* * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. @@ -1046,13 +1071,17 @@ void __init sam9x60_pm_init(void) static const int iomaps[] __initconst = { [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC), }; + int ret; if (!IS_ENABLED(CONFIG_SOC_SAM9X60)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); - at91_dt_ramc(false); + ret = at91_dt_ramc(false); + if (ret) + return; + at91_pm_init(NULL); soc_pm.ws_ids = sam9x60_ws_ids; @@ -1061,6 +1090,8 @@ void __init sam9x60_pm_init(void) void __init at91sam9_pm_init(void) { + int ret; + if (!IS_ENABLED(CONFIG_SOC_AT91SAM9)) return; @@ -1072,7 +1103,10 @@ void __init at91sam9_pm_init(void) soc_pm.data.standby_mode = AT91_PM_STANDBY; soc_pm.data.suspend_mode = AT91_PM_ULP0; - at91_dt_ramc(false); + ret = at91_dt_ramc(false); + if (ret) + return; + at91_pm_init(at91sam9_idle); } @@ -1081,12 +1115,16 @@ void __init sama5_pm_init(void) static const int modes[] __initconst = { AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, }; + int ret; if (!IS_ENABLED(CONFIG_SOC_SAMA5)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); - at91_dt_ramc(false); + ret = at91_dt_ramc(false); + if (ret) + return; + at91_pm_init(NULL); } @@ -1101,13 +1139,17 @@ void __init sama5d2_pm_init(void) [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) | AT91_PM_IOMAP(SFRBU), }; + int ret; if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); - at91_dt_ramc(false); + ret = at91_dt_ramc(false); + if (ret) + return; + at91_pm_init(NULL); soc_pm.ws_ids = sama5d2_ws_ids; @@ -1127,13 +1169,17 @@ void __init sama7_pm_init(void) [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) | AT91_PM_IOMAP(SHDWC), }; + int ret; if (!IS_ENABLED(CONFIG_SOC_SAMA7)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); - at91_dt_ramc(true); + ret = at91_dt_ramc(true); + if (ret) + return; + at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); at91_pm_init(NULL); -- cgit v1.2.3 From 63a84d560e818f8a382a4a61bf1e59df43cdc06d Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 Aug 2021 16:19:13 +0300 Subject: ARM: dts: at91: sama7g5: add ram controllers Add RAM and RAMC PHY controllers. These are necessary for platform specific power management code. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210823131915.23857-3-claudiu.beznea@microchip.com --- arch/arm/boot/dts/sama7g5.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index cc6be6db7b80..ecabab4343b6 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -515,6 +515,18 @@ }; }; + uddrc: uddrc@e3800000 { + compatible = "microchip,sama7g5-uddrc"; + reg = <0xe3800000 0x4000>; + status = "okay"; + }; + + ddr3phy: ddr3phy@e3804000 { + compatible = "microchip,sama7g5-ddr3phy"; + reg = <0xe3804000 0x1000>; + status = "okay"; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; -- cgit v1.2.3 From 2305d7ab661029f00ff49141b9ca90f736c1f9af Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 Aug 2021 16:19:14 +0300 Subject: ARM: dts: at91: sama7g5: add securam node Add securam node. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210823131915.23857-4-claudiu.beznea@microchip.com --- arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index ecabab4343b6..3a4315ac0eb0 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -75,6 +75,17 @@ #size-cells = <1>; ranges; + securam: securam@e0000000 { + compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xe0000000 0x4000>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe0000000 0x4000>; + no-memory-wc; + status = "okay"; + }; + secumod: secumod@e0004000 { compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; reg = <0xe0004000 0x4000>; -- cgit v1.2.3 From 16b161bcf5d491c7856effc16c8901984df4466a Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 Aug 2021 16:19:15 +0300 Subject: ARM: dts: at91: sama7g5: add shdwc node Add shutdown controller node and enable it. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210823131915.23857-5-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 9 +++++++++ arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 4cbed98cc2f4..8b13b031a167 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -634,6 +634,15 @@ pinctrl-0 = <&pinctrl_sdmmc2_default>; }; +&shdwc { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + &spdifrx { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdifrx_default>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 3a4315ac0eb0..e50806cf7660 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -122,6 +122,17 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; + shdwc: shdwc@e001d010 { + compatible = "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d010 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + rtt: rtt@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; -- cgit v1.2.3 From 6f34662284511a04643b25ad3032adc6fe4689ab Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 8 Sep 2021 12:43:29 +0300 Subject: ARM: dts: at91: sama7g5: add chipid Add chipid node for sama7g5. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210908094329.182477-1-claudiu.beznea@microchip.com --- arch/arm/boot/dts/sama7g5.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index e50806cf7660..6c58c151c6d9 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -159,6 +159,11 @@ clocks = <&clk32k 0>; }; + chipid@e0020000 { + compatible = "microchip,sama7g5-chipid"; + reg = <0xe0020000 0x8>; + }; + sdmmc0: mmc@e1204000 { compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; reg = <0xe1204000 0x4000>; -- cgit v1.2.3 From ac809e7879b15643105795a5f9becb5ef44abd93 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 30 Aug 2021 13:09:27 +0300 Subject: ARM: at91: pm: switch backup area to vbat in backup mode Backup area is now switched to VDDIN33 at boot (with the help of bootloader). When switching to backup mode we need to switch backup area to VBAT as all the other power sources are cut off. The resuming from backup mode is done with the help of bootloader, so there is no need to do something particular in Linux to restore backup area power source. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com --- arch/arm/mach-at91/pm.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index d92afca64b49..8711d6824c1f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -47,12 +47,26 @@ struct at91_pm_bu { unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION]; }; +/* + * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU + * @pswbu: power switch BU control registers + */ +struct at91_pm_sfrbu_regs { + struct { + u32 key; + u32 ctrl; + u32 state; + u32 softsw; + } pswbu; +}; + /** * struct at91_soc_pm - AT91 SoC power management data structure * @config_shdwc_ws: wakeup sources configuration function for SHDWC * @config_pmc_ws: wakeup srouces configuration function for PMC * @ws_ids: wakup sources of_device_id array * @data: PM data to be used on last phase of suspend + * @sfrbu_regs: SFRBU registers mapping * @bu: backup unit mapped data (for backup mode) * @memcs: memory chip select */ @@ -62,6 +76,7 @@ struct at91_soc_pm { const struct of_device_id *ws_ids; struct at91_pm_bu *bu; struct at91_pm_data data; + struct at91_pm_sfrbu_regs sfrbu_regs; void *memcs; }; @@ -356,9 +371,36 @@ static int at91_suspend_finish(unsigned long val) return 0; } +static void at91_pm_switch_ba_to_vbat(void) +{ + unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu); + unsigned int val; + + /* Just for safety. */ + if (!soc_pm.data.sfrbu) + return; + + val = readl(soc_pm.data.sfrbu + offset); + + /* Already on VBAT. */ + if (!(val & soc_pm.sfrbu_regs.pswbu.state)) + return; + + val &= ~soc_pm.sfrbu_regs.pswbu.softsw; + val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl; + writel(val, soc_pm.data.sfrbu + offset); + + /* Wait for update. */ + val = readl(soc_pm.data.sfrbu + offset); + while (val & soc_pm.sfrbu_regs.pswbu.state) + val = readl(soc_pm.data.sfrbu + offset); +} + static void at91_pm_suspend(suspend_state_t state) { if (soc_pm.data.mode == AT91_PM_BACKUP) { + at91_pm_switch_ba_to_vbat(); + cpu_suspend(0, at91_suspend_finish); /* The SRAM is lost between suspend cycles */ @@ -1155,6 +1197,11 @@ void __init sama5d2_pm_init(void) soc_pm.ws_ids = sama5d2_ws_ids; soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws; soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws; + + soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8); + soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); + soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); + soc_pm.sfrbu_regs.pswbu.state = BIT(3); } void __init sama7_pm_init(void) @@ -1185,6 +1232,11 @@ void __init sama7_pm_init(void) soc_pm.ws_ids = sama7g5_ws_ids; soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; + + soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8); + soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); + soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); + soc_pm.sfrbu_regs.pswbu.state = BIT(2); } static int __init at91_pm_modes_select(char *str) -- cgit v1.2.3 From 4348cc10da6377a86940beb20ad357933b8f91bb Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Thu, 2 Sep 2021 15:13:58 +0300 Subject: ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default Without a sensor node, the ISC will simply fail to probe, as the corresponding port node is missing. It is then logical to disable the node in the devicetree. If we add a port with a connection to a sensor endpoint, ISC can be enabled. Signed-off-by: Eugen Hristev Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com --- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 614999dcb990..cd4672501add 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -71,7 +71,6 @@ isc: isc@f0008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; - status = "okay"; }; qspi1: spi@f0024000 { -- cgit v1.2.3 From 3f1c260ffddb7ea51d54c37343c6d500a10317eb Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Fri, 10 Sep 2021 21:03:22 +0200 Subject: MAINTAINERS: Add myself as MStar/Sigmastar Armv7 SoC maintainers As proposed by Daniel, I am going to help him to maintain the platform, so add myself as co-maintainer. Signed-off-by: Romain Perier Acked-by: Daniel Palmer Link: https://lore.kernel.org/r/20210910190322.27058-5-romain.perier@gmail.com' Signed-off-by: Arnd Bergmann --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..c6c1180d3473 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2236,6 +2236,7 @@ F: arch/arm/mach-pxa/mioa701.c ARM/MStar/Sigmastar Armv7 SoC support M: Daniel Palmer +M: Romain Perier L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained W: http://linux-chenxing.org/ -- cgit v1.2.3 From f60f5741002b9fde748cff65fd09bd6222c5db0c Mon Sep 17 00:00:00 2001 From: Md Sadre Alam Date: Tue, 7 Sep 2021 12:35:57 +0530 Subject: mtd: rawnand: qcom: Update code word value for raw read From QPIC V2 onwards there is a separate register to read last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n". qcom_nandc_read_cw_raw() is used to read only one code word at a time. If we will configure number of code words to 1 in in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks its reading the last code word, since from QPIC V2 onwards we are having separate register to read the last code word, we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register to fetch data from controller buffer to system memory. Fixes: 503ee5aad430 ("mtd: rawnand: qcom: update last code word register") Cc: stable@kernel.org Signed-off-by: Md Sadre Alam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/1630998357-1359-1-git-send-email-mdalam@codeaurora.org --- drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index ef0badea4f41..04e6f7b26706 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, struct nand_ecc_ctrl *ecc = &chip->ecc; int data_size1, data_size2, oob_size1, oob_size2; int ret, reg_off = FLASH_BUF_ACC, read_loc = 0; + int raw_cw = cw; nand_read_page_op(chip, page, 0, NULL, 0); host->use_ecc = false; + if (nandc->props->qpic_v2) + raw_cw = ecc->steps - 1; + clear_bam_transaction(nandc); set_address(host, host->cw_size * cw, page); - update_rw_regs(host, 1, true, cw); + update_rw_regs(host, 1, true, raw_cw); config_nand_page_read(chip); data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); @@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1); } - config_nand_cw_read(chip, false, cw); + config_nand_cw_read(chip, false, raw_cw); read_data_dma(nandc, reg_off, data_buf, data_size1, 0); reg_off += data_size1; -- cgit v1.2.3 From 8b4bd256674720709a9d858a219fcac6f2f253b5 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 9 Sep 2021 10:56:12 +0200 Subject: thermal/drivers/int340x: Do not set a wrong tcc offset on resume After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada Signed-off-by: Antoine Tenart Signed-off-by: Daniel Lezcano Reviewed-by: Srinivas Pandruvada Tested-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org --- drivers/thermal/intel/int340x_thermal/processor_thermal_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c index 0f0038af2ad4..fb64acfd5e07 100644 --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c @@ -107,7 +107,7 @@ static int tcc_offset_update(unsigned int tcc) return 0; } -static unsigned int tcc_offset_save; +static int tcc_offset_save = -1; static ssize_t tcc_offset_degree_celsius_store(struct device *dev, struct device_attribute *attr, const char *buf, @@ -352,7 +352,8 @@ int proc_thermal_resume(struct device *dev) proc_dev = dev_get_drvdata(dev); proc_thermal_read_ppcc(proc_dev); - tcc_offset_update(tcc_offset_save); + if (tcc_offset_save >= 0) + tcc_offset_update(tcc_offset_save); return 0; } -- cgit v1.2.3 From 356ed64991c6847a0c4f2e8fa3b1133f7a14f1fc Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 14 Sep 2021 10:33:51 +0800 Subject: bpf: Handle return value of BPF_PROG_TYPE_STRUCT_OPS prog Currently if a function ptr in struct_ops has a return value, its caller will get a random return value from it, because the return value of related BPF_PROG_TYPE_STRUCT_OPS prog is just dropped. So adding a new flag BPF_TRAMP_F_RET_FENTRY_RET to tell bpf trampoline to save and return the return value of struct_ops prog if ret_size of the function ptr is greater than 0. Also restricting the flag to be used alone. Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS") Signed-off-by: Hou Tao Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20210914023351.3664499-1-houtao1@huawei.com --- arch/x86/net/bpf_jit_comp.c | 53 ++++++++++++++++++++++++++++++++++----------- include/linux/bpf.h | 3 ++- kernel/bpf/bpf_struct_ops.c | 7 ++++-- 3 files changed, 47 insertions(+), 16 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 0fe6aacef3db..d24a512fd6f3 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1744,7 +1744,7 @@ static void restore_regs(const struct btf_func_model *m, u8 **prog, int nr_args, } static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, - struct bpf_prog *p, int stack_size, bool mod_ret) + struct bpf_prog *p, int stack_size, bool save_ret) { u8 *prog = *pprog; u8 *jmp_insn; @@ -1777,11 +1777,15 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, if (emit_call(&prog, p->bpf_func, prog)) return -EINVAL; - /* BPF_TRAMP_MODIFY_RETURN trampolines can modify the return + /* + * BPF_TRAMP_MODIFY_RETURN trampolines can modify the return * of the previous call which is then passed on the stack to * the next BPF program. + * + * BPF_TRAMP_FENTRY trampoline may need to return the return + * value of BPF_PROG_TYPE_STRUCT_OPS prog. */ - if (mod_ret) + if (save_ret) emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8); /* replace 2 nops with JE insn, since jmp target is known */ @@ -1828,13 +1832,15 @@ static int emit_cond_near_jump(u8 **pprog, void *func, void *ip, u8 jmp_cond) } static int invoke_bpf(const struct btf_func_model *m, u8 **pprog, - struct bpf_tramp_progs *tp, int stack_size) + struct bpf_tramp_progs *tp, int stack_size, + bool save_ret) { int i; u8 *prog = *pprog; for (i = 0; i < tp->nr_progs; i++) { - if (invoke_bpf_prog(m, &prog, tp->progs[i], stack_size, false)) + if (invoke_bpf_prog(m, &prog, tp->progs[i], stack_size, + save_ret)) return -EINVAL; } *pprog = prog; @@ -1877,6 +1883,23 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog, return 0; } +static bool is_valid_bpf_tramp_flags(unsigned int flags) +{ + if ((flags & BPF_TRAMP_F_RESTORE_REGS) && + (flags & BPF_TRAMP_F_SKIP_FRAME)) + return false; + + /* + * BPF_TRAMP_F_RET_FENTRY_RET is only used by bpf_struct_ops, + * and it must be used alone. + */ + if ((flags & BPF_TRAMP_F_RET_FENTRY_RET) && + (flags & ~BPF_TRAMP_F_RET_FENTRY_RET)) + return false; + + return true; +} + /* Example: * __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev); * its 'struct btf_func_model' will be nr_args=2 @@ -1949,17 +1972,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i struct bpf_tramp_progs *fmod_ret = &tprogs[BPF_TRAMP_MODIFY_RETURN]; u8 **branches = NULL; u8 *prog; + bool save_ret; /* x86-64 supports up to 6 arguments. 7+ can be added in the future */ if (nr_args > 6) return -ENOTSUPP; - if ((flags & BPF_TRAMP_F_RESTORE_REGS) && - (flags & BPF_TRAMP_F_SKIP_FRAME)) + if (!is_valid_bpf_tramp_flags(flags)) return -EINVAL; - if (flags & BPF_TRAMP_F_CALL_ORIG) - stack_size += 8; /* room for return value of orig_call */ + /* room for return value of orig_call or fentry prog */ + save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET); + if (save_ret) + stack_size += 8; if (flags & BPF_TRAMP_F_IP_ARG) stack_size += 8; /* room for IP address argument */ @@ -2005,7 +2030,8 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i } if (fentry->nr_progs) - if (invoke_bpf(m, &prog, fentry, stack_size)) + if (invoke_bpf(m, &prog, fentry, stack_size, + flags & BPF_TRAMP_F_RET_FENTRY_RET)) return -EINVAL; if (fmod_ret->nr_progs) { @@ -2052,7 +2078,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i } if (fexit->nr_progs) - if (invoke_bpf(m, &prog, fexit, stack_size)) { + if (invoke_bpf(m, &prog, fexit, stack_size, false)) { ret = -EINVAL; goto cleanup; } @@ -2072,9 +2098,10 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i ret = -EINVAL; goto cleanup; } - /* restore original return value back into RAX */ - emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, -8); } + /* restore return value of orig_call or fentry prog back into RAX */ + if (save_ret) + emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, -8); EMIT1(0x5B); /* pop rbx */ EMIT1(0xC9); /* leave */ diff --git a/include/linux/bpf.h b/include/linux/bpf.h index f4c16f19f83e..020a7d5bf470 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -578,11 +578,12 @@ struct btf_func_model { * programs only. Should not be used with normal calls and indirect calls. */ #define BPF_TRAMP_F_SKIP_FRAME BIT(2) - /* Store IP address of the caller on the trampoline stack, * so it's available for trampoline's programs. */ #define BPF_TRAMP_F_IP_ARG BIT(3) +/* Return the return value of fentry prog. Only used by bpf_struct_ops. */ +#define BPF_TRAMP_F_RET_FENTRY_RET BIT(4) /* Each call __bpf_prog_enter + call bpf_func + call __bpf_prog_exit is ~50 * bytes on x86. Pick a number to fit into BPF_IMAGE_SIZE / 2 diff --git a/kernel/bpf/bpf_struct_ops.c b/kernel/bpf/bpf_struct_ops.c index d6731c32864e..9abcc33f02cf 100644 --- a/kernel/bpf/bpf_struct_ops.c +++ b/kernel/bpf/bpf_struct_ops.c @@ -368,6 +368,7 @@ static int bpf_struct_ops_map_update_elem(struct bpf_map *map, void *key, const struct btf_type *mtype, *ptype; struct bpf_prog *prog; u32 moff; + u32 flags; moff = btf_member_bit_offset(t, member) / 8; ptype = btf_type_resolve_ptr(btf_vmlinux, member->type, NULL); @@ -431,10 +432,12 @@ static int bpf_struct_ops_map_update_elem(struct bpf_map *map, void *key, tprogs[BPF_TRAMP_FENTRY].progs[0] = prog; tprogs[BPF_TRAMP_FENTRY].nr_progs = 1; + flags = st_ops->func_models[i].ret_size > 0 ? + BPF_TRAMP_F_RET_FENTRY_RET : 0; err = arch_prepare_bpf_trampoline(NULL, image, st_map->image + PAGE_SIZE, - &st_ops->func_models[i], 0, - tprogs, NULL); + &st_ops->func_models[i], + flags, tprogs, NULL); if (err < 0) goto reset_unlock; -- cgit v1.2.3 From 2cc74e1ee31d00393b6698ec80b322fd26523da4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 8 Sep 2021 13:43:28 +0200 Subject: IB/cma: Do not send IGMP leaves for sendonly Multicast groups ROCE uses IGMP for Multicast instead of the native Infiniband system where joins are required in order to post messages on the Multicast group. On Ethernet one can send Multicast messages to arbitrary addresses without the need to subscribe to a group. So ROCE correctly does not send IGMP joins during rdma_join_multicast(). F.e. in cma_iboe_join_multicast() we see: if (addr->sa_family == AF_INET) { if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) { ib.rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; if (!send_only) { err = cma_igmp_send(ndev, &ib.rec.mgid, true); } } } else { So the IGMP join is suppressed as it is unnecessary. However no such check is done in destroy_mc(). And therefore leaving a sendonly multicast group will send an IGMP leave. This means that the following scenario can lead to a multicast receiver unexpectedly being unsubscribed from a MC group: 1. Sender thread does a sendonly join on MC group X. No IGMP join is sent. 2. Receiver thread does a regular join on the same MC Group x. IGMP join is sent and the receiver begins to get messages. 3. Sender thread terminates and destroys MC group X. IGMP leave is sent and the receiver no longer receives data. This patch adds the same logic for sendonly joins to destroy_mc() that is also used in cma_iboe_join_multicast(). Fixes: ab15c95a17b3 ("IB/core: Support for CMA multicast join flags") Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2109081340540.668072@gentwo.de Signed-off-by: Christoph Lameter Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index c40791baced5..86ee3b01b3ee 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1810,6 +1810,8 @@ static void cma_release_port(struct rdma_id_private *id_priv) static void destroy_mc(struct rdma_id_private *id_priv, struct cma_multicast *mc) { + bool send_only = mc->join_state == BIT(SENDONLY_FULLMEMBER_JOIN); + if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num)) ib_sa_free_multicast(mc->sa_mc); @@ -1826,7 +1828,10 @@ static void destroy_mc(struct rdma_id_private *id_priv, cma_set_mgid(id_priv, (struct sockaddr *)&mc->addr, &mgid); - cma_igmp_send(ndev, &mgid, false); + + if (!send_only) + cma_igmp_send(ndev, &mgid, false); + dev_put(ndev); } -- cgit v1.2.3 From 0d818706130e2f4e828c3fc028917677fac76a09 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 13 Sep 2021 06:38:36 -0400 Subject: virtio: don't fail on !of_device_is_compatible A recent change checking of_device_is_compatible on probe broke some powerpc/pseries setups. Apparently there virtio devices do not have a "compatible" property - they are matched by PCI vendor/device ids. Let's just skip of_node setup but proceed with initialization like we did previously. Fixes: 694a1116b405 ("virtio: Bind virtio device to device-tree node") Reported-by: Alexey Kardashevskiy Cc: Arnd Bergmann Cc: Viresh Kumar Tested-by: Guenter Roeck Acked-by: Jason Wang Reviewed-by: Viresh Kumar Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 588e02fb91d3..0a5b54034d4b 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -345,8 +345,13 @@ static int virtio_device_of_init(struct virtio_device *dev) ret = snprintf(compat, sizeof(compat), "virtio,device%x", dev->id.device); BUG_ON(ret >= sizeof(compat)); + /* + * On powerpc/pseries virtio devices are PCI devices so PCI + * vendor/device ids play the role of the "compatible" property. + * Simply don't init of_node in this case. + */ if (!of_device_is_compatible(np, compat)) { - ret = -EINVAL; + ret = 0; goto out; } -- cgit v1.2.3 From 6243e3c78ace66d337a1e43b60a1aa8f5b61bd72 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Sep 2021 10:32:24 +0300 Subject: vduse: missing error code in vduse_init() This should return -ENOMEM if alloc_workqueue() fails. Currently it returns success. Fixes: b66219796563 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210907073223.GA18254@kili Signed-off-by: Michael S. Tsirkin Reviewed-by: Xie Yongji Acked-by: Jason Wang --- drivers/vdpa/vdpa_user/vduse_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c index 29a38ecba19e..e36287feac0e 100644 --- a/drivers/vdpa/vdpa_user/vduse_dev.c +++ b/drivers/vdpa/vdpa_user/vduse_dev.c @@ -1593,8 +1593,10 @@ static int vduse_init(void) vduse_irq_wq = alloc_workqueue("vduse-irq", WQ_HIGHPRI | WQ_SYSFS | WQ_UNBOUND, 0); - if (!vduse_irq_wq) + if (!vduse_irq_wq) { + ret = -ENOMEM; goto err_wq; + } ret = vduse_domain_init(); if (ret) -- cgit v1.2.3 From 7bb5fb207334758ce6ee84345d6f08e4fb284fe6 Mon Sep 17 00:00:00 2001 From: Xie Yongji Date: Mon, 6 Sep 2021 22:21:58 +0800 Subject: vduse: Cleanup the old kernel states after reset failure We should cleanup the old kernel states e.g. interrupt callback no matter whether the userspace handle the reset correctly or not since virtio-vdpa can't handle the reset failure now. Otherwise, the old state might be used after reset which might break something, e.g. the old interrupt callback might be triggered by userspace after reset, which can break the virtio device driver. Signed-off-by: Xie Yongji Link: https://lore.kernel.org/r/20210906142158.181-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/vdpa_user/vduse_dev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c index e36287feac0e..26e3d90d1e7c 100644 --- a/drivers/vdpa/vdpa_user/vduse_dev.c +++ b/drivers/vdpa/vdpa_user/vduse_dev.c @@ -665,13 +665,11 @@ static void vduse_vdpa_set_config(struct vdpa_device *vdpa, unsigned int offset, static int vduse_vdpa_reset(struct vdpa_device *vdpa) { struct vduse_dev *dev = vdpa_to_vduse(vdpa); - - if (vduse_dev_set_status(dev, 0)) - return -EIO; + int ret = vduse_dev_set_status(dev, 0); vduse_dev_reset(dev); - return 0; + return ret; } static u32 vduse_vdpa_get_generation(struct vdpa_device *vdpa) -- cgit v1.2.3 From ef12e4bf4276a07fd350179fa63d0d337ea0a867 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 9 Sep 2021 09:36:52 +0300 Subject: vdpa/mlx5: Clear ready indication for control VQ When clearing VQs ready indication for the data VQs, do the same for the control VQ. Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210909063652.46880-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 294ba05e6fc9..64dfd0f500d2 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -2145,6 +2145,8 @@ static void clear_vqs_ready(struct mlx5_vdpa_net *ndev) for (i = 0; i < ndev->mvdev.max_vqs; i++) ndev->vqs[i].ready = false; + + ndev->mvdev.cvq.ready = false; } static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status) -- cgit v1.2.3 From 759be8993b1b40e05b8908583336b8e230e67b08 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 9 Sep 2021 09:37:38 +0300 Subject: vdpa/mlx5: Avoid executing set_vq_ready() if device is reset Avoid executing set_vq_ready() if the device has been reset. In such case, the features are cleared and cannot be used in conditional statements. Such reference happens is the function ctrl_vq_idx(). Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210909063738.46970-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 64dfd0f500d2..bd56de7484dc 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1714,6 +1714,9 @@ static void mlx5_vdpa_set_vq_ready(struct vdpa_device *vdev, u16 idx, bool ready struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev); struct mlx5_vdpa_virtqueue *mvq; + if (!mvdev->actual_features) + return; + if (!is_index_valid(mvdev, idx)) return; -- cgit v1.2.3 From be9c6bad9b46451ba5bb8d366c51e2475f374981 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Sep 2021 10:32:53 +0300 Subject: vdpa: potential uninitialized return in vhost_vdpa_va_map() The concern here is that "ret" can be uninitialized if we hit the "goto next" condition on every iteration through the loop. Fixes: 41ba1b5f9d4b ("vdpa: Support transferring virtual addressing during DMA mapping") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210907073253.GB18254@kili Signed-off-by: Michael S. Tsirkin Reviewed-by: Xie Yongji Acked-by: Jason Wang Reviewed-by: Stefano Garzarella --- drivers/vhost/vdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index f41d081777f5..35927ceb26ff 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -640,7 +640,7 @@ static int vhost_vdpa_va_map(struct vhost_vdpa *v, u64 offset, map_size, map_iova = iova; struct vdpa_map_file *map_file; struct vm_area_struct *vma; - int ret; + int ret = 0; mmap_read_lock(dev->mm); -- cgit v1.2.3 From f8d858e607b2a36808ac6d4218f5f5203d7a7d63 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 14 Sep 2021 16:46:33 +0200 Subject: xfrm: make user policy API complete >From a userland POV, this API was based on some magic values: - dirmask and action were bitfields but meaning of bits (XFRM_POL_DEFAULT_*) are not exported; - action is confusing, if a bit is set, does it mean drop or accept? Let's try to simplify this uapi by using explicit field and macros. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 9 ++++++--- net/xfrm/xfrm_user.c | 36 +++++++++++++++++++----------------- 2 files changed, 25 insertions(+), 20 deletions(-) diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 26f456b1f33e..eda0426ec4c2 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -514,9 +514,12 @@ struct xfrm_user_offload { #define XFRM_OFFLOAD_INBOUND 2 struct xfrm_userpolicy_default { -#define XFRM_USERPOLICY_DIRMASK_MAX (sizeof(__u8) * 8) - __u8 dirmask; - __u8 action; +#define XFRM_USERPOLICY_UNSPEC 0 +#define XFRM_USERPOLICY_BLOCK 1 +#define XFRM_USERPOLICY_ACCEPT 2 + __u8 in; + __u8 fwd; + __u8 out; }; #ifndef __KERNEL__ diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 4719a6d54aa6..90c88390f1fe 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1966,16 +1966,21 @@ static int xfrm_set_default(struct sk_buff *skb, struct nlmsghdr *nlh, { struct net *net = sock_net(skb->sk); struct xfrm_userpolicy_default *up = nlmsg_data(nlh); - u8 dirmask; - u8 old_default = net->xfrm.policy_default; - if (up->dirmask >= XFRM_USERPOLICY_DIRMASK_MAX) - return -EINVAL; + if (up->in == XFRM_USERPOLICY_BLOCK) + net->xfrm.policy_default |= XFRM_POL_DEFAULT_IN; + else if (up->in == XFRM_USERPOLICY_ACCEPT) + net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_IN; - dirmask = (1 << up->dirmask) & XFRM_POL_DEFAULT_MASK; + if (up->fwd == XFRM_USERPOLICY_BLOCK) + net->xfrm.policy_default |= XFRM_POL_DEFAULT_FWD; + else if (up->fwd == XFRM_USERPOLICY_ACCEPT) + net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_FWD; - net->xfrm.policy_default = (old_default & (0xff ^ dirmask)) - | (up->action << up->dirmask); + if (up->out == XFRM_USERPOLICY_BLOCK) + net->xfrm.policy_default |= XFRM_POL_DEFAULT_OUT; + else if (up->out == XFRM_USERPOLICY_ACCEPT) + net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_OUT; rt_genid_bump_all(net); @@ -1988,13 +1993,11 @@ static int xfrm_get_default(struct sk_buff *skb, struct nlmsghdr *nlh, struct sk_buff *r_skb; struct nlmsghdr *r_nlh; struct net *net = sock_net(skb->sk); - struct xfrm_userpolicy_default *r_up, *up; + struct xfrm_userpolicy_default *r_up; int len = NLMSG_ALIGN(sizeof(struct xfrm_userpolicy_default)); u32 portid = NETLINK_CB(skb).portid; u32 seq = nlh->nlmsg_seq; - up = nlmsg_data(nlh); - r_skb = nlmsg_new(len, GFP_ATOMIC); if (!r_skb) return -ENOMEM; @@ -2005,15 +2008,14 @@ static int xfrm_get_default(struct sk_buff *skb, struct nlmsghdr *nlh, return -EMSGSIZE; } - if (up->dirmask >= XFRM_USERPOLICY_DIRMASK_MAX) { - kfree_skb(r_skb); - return -EINVAL; - } - r_up = nlmsg_data(r_nlh); - r_up->action = ((net->xfrm.policy_default & (1 << up->dirmask)) >> up->dirmask); - r_up->dirmask = up->dirmask; + r_up->in = net->xfrm.policy_default & XFRM_POL_DEFAULT_IN ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; + r_up->fwd = net->xfrm.policy_default & XFRM_POL_DEFAULT_FWD ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; + r_up->out = net->xfrm.policy_default & XFRM_POL_DEFAULT_OUT ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; nlmsg_end(r_skb, r_nlh); return nlmsg_unicast(net->xfrm.nlsk, r_skb, portid); -- cgit v1.2.3 From 88d0adb5f13b1c52fbb7d755f6f79db18c2f0c2c Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 14 Sep 2021 16:46:34 +0200 Subject: xfrm: notify default policy on update This configuration knob is very sensible, it should be notified when changing. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 90c88390f1fe..0eba0c27c665 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1961,6 +1961,36 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb, return skb; } +static int xfrm_notify_userpolicy(struct net *net) +{ + struct xfrm_userpolicy_default *up; + int len = NLMSG_ALIGN(sizeof(*up)); + struct nlmsghdr *nlh; + struct sk_buff *skb; + + skb = nlmsg_new(len, GFP_ATOMIC); + if (skb == NULL) + return -ENOMEM; + + nlh = nlmsg_put(skb, 0, 0, XFRM_MSG_GETDEFAULT, sizeof(*up), 0); + if (nlh == NULL) { + kfree_skb(skb); + return -EMSGSIZE; + } + + up = nlmsg_data(nlh); + up->in = net->xfrm.policy_default & XFRM_POL_DEFAULT_IN ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; + up->fwd = net->xfrm.policy_default & XFRM_POL_DEFAULT_FWD ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; + up->out = net->xfrm.policy_default & XFRM_POL_DEFAULT_OUT ? + XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT; + + nlmsg_end(skb, nlh); + + return xfrm_nlmsg_multicast(net, skb, 0, XFRMNLGRP_POLICY); +} + static int xfrm_set_default(struct sk_buff *skb, struct nlmsghdr *nlh, struct nlattr **attrs) { @@ -1984,6 +2014,7 @@ static int xfrm_set_default(struct sk_buff *skb, struct nlmsghdr *nlh, rt_genid_bump_all(net); + xfrm_notify_userpolicy(net); return 0; } -- cgit v1.2.3 From ac4dfccb96571ca03af7cac64b7a0b2952c97f3a Mon Sep 17 00:00:00 2001 From: Yong Zhi Date: Wed, 15 Sep 2021 09:32:30 +0300 Subject: ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. Fixes: e657c18a01c8 ('ASoC: SOF: Add xtensa support') Signed-off-by: Yong Zhi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Daniel Baluta Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210915063230.29711-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/xtensa/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/xtensa/core.c b/sound/soc/sof/xtensa/core.c index bbb9a2282ed9..f6e3411b33cf 100644 --- a/sound/soc/sof/xtensa/core.c +++ b/sound/soc/sof/xtensa/core.c @@ -122,9 +122,9 @@ static void xtensa_stack(struct snd_sof_dev *sdev, void *oops, u32 *stack, * 0x0049fbb0: 8000f2d0 0049fc00 6f6c6c61 00632e63 */ for (i = 0; i < stack_words; i += 4) { - hex_dump_to_buffer(stack + i * 4, 16, 16, 4, + hex_dump_to_buffer(stack + i, 16, 16, 4, buf, sizeof(buf), false); - dev_err(sdev->dev, "0x%08x: %s\n", stack_ptr + i, buf); + dev_err(sdev->dev, "0x%08x: %s\n", stack_ptr + i * 4, buf); } } -- cgit v1.2.3 From 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 Mon Sep 17 00:00:00 2001 From: "F.A.Sulaiman" Date: Tue, 24 Aug 2021 20:37:30 +0530 Subject: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com Signed-off-by: F.A. SULAIMAN Reviewed-by: Pavel Skripkin Signed-off-by: Jiri Kosina --- drivers/hid/hid-betopff.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-betopff.c b/drivers/hid/hid-betopff.c index 0790fbd3fc9a..467d789f9bc2 100644 --- a/drivers/hid/hid-betopff.c +++ b/drivers/hid/hid-betopff.c @@ -56,15 +56,22 @@ static int betopff_init(struct hid_device *hid) { struct betopff_device *betopff; struct hid_report *report; - struct hid_input *hidinput = - list_first_entry(&hid->inputs, struct hid_input, list); + struct hid_input *hidinput; struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; - struct input_dev *dev = hidinput->input; + struct input_dev *dev; int field_count = 0; int error; int i, j; + if (list_empty(&hid->inputs)) { + hid_err(hid, "no inputs found\n"); + return -ENODEV; + } + + hidinput = list_first_entry(&hid->inputs, struct hid_input, list); + dev = hidinput->input; + if (list_empty(report_list)) { hid_err(hid, "no output reports found\n"); return -ENODEV; -- cgit v1.2.3 From ca465e1f1f9b38fe916a36f7d80c5d25f2337c81 Mon Sep 17 00:00:00 2001 From: Tao Liu Date: Mon, 13 Sep 2021 17:33:44 +0800 Subject: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error. Fixes: c80a0c52d85c ("RDMA/cma: Add missing error handling of listen_id") Link: https://lore.kernel.org/r/20210913093344.17230-1-thomas.liu@ucloud.cn Signed-off-by: Tao Liu Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 86ee3b01b3ee..5aa58897965d 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1746,15 +1746,16 @@ static void cma_cancel_route(struct rdma_id_private *id_priv) } } -static void cma_cancel_listens(struct rdma_id_private *id_priv) +static void _cma_cancel_listens(struct rdma_id_private *id_priv) { struct rdma_id_private *dev_id_priv; + lockdep_assert_held(&lock); + /* * Remove from listen_any_list to prevent added devices from spawning * additional listen requests. */ - mutex_lock(&lock); list_del(&id_priv->list); while (!list_empty(&id_priv->listen_list)) { @@ -1768,6 +1769,12 @@ static void cma_cancel_listens(struct rdma_id_private *id_priv) rdma_destroy_id(&dev_id_priv->id); mutex_lock(&lock); } +} + +static void cma_cancel_listens(struct rdma_id_private *id_priv) +{ + mutex_lock(&lock); + _cma_cancel_listens(id_priv); mutex_unlock(&lock); } @@ -2579,7 +2586,7 @@ static int cma_listen_on_all(struct rdma_id_private *id_priv) return 0; err_listen: - list_del(&id_priv->list); + _cma_cancel_listens(id_priv); mutex_unlock(&lock); if (to_destroy) rdma_destroy_id(&to_destroy->id); -- cgit v1.2.3 From 67fd71ba16a37c663d139f5ba5296f344d80d072 Mon Sep 17 00:00:00 2001 From: Mizuho Mori Date: Thu, 29 Jul 2021 20:03:25 +0900 Subject: HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid//rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 833fcf07ff35..6ccfa0cb997a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -336,12 +336,19 @@ static int apple_event(struct hid_device *hdev, struct hid_field *field, /* * MacBook JIS keyboard has wrong logical maximum + * Magic Keyboard JIS has wrong logical maximum */ static __u8 *apple_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { struct apple_sc *asc = hid_get_drvdata(hdev); + if(*rsize >=71 && rdesc[70] == 0x65 && rdesc[64] == 0x65) { + hid_info(hdev, + "fixing up Magic Keyboard JIS report descriptor\n"); + rdesc[64] = rdesc[70] = 0xe7; + } + if ((asc->quirks & APPLE_RDESC_JIS) && *rsize >= 60 && rdesc[53] == 0x65 && rdesc[59] == 0x65) { hid_info(hdev, -- cgit v1.2.3 From 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 Mon Sep 17 00:00:00 2001 From: Jeremy Sowden Date: Sun, 12 Sep 2021 22:24:33 +0100 Subject: netfilter: ip6_tables: zero-initialize fragment offset ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is specified (`-p tcp`, for example). However, if the flag is not set, `ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which case the fragment offset is left uninitialized and a garbage value is passed to each matcher. Signed-off-by: Jeremy Sowden Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6_tables.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index de2cf3943b91..a579ea14a69b 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -273,6 +273,7 @@ ip6t_do_table(struct sk_buff *skb, * things we don't know, ie. tcp syn flag or ports). If the * rule is also a fragment-specific rule, non-fragments won't * match it. */ + acpar.fragoff = 0; acpar.hotdrop = false; acpar.state = state; -- cgit v1.2.3 From 0c8fbaa553077630e8eae45bd9676cfc01836aeb Mon Sep 17 00:00:00 2001 From: Joshua-Dickens Date: Tue, 14 Sep 2021 13:28:25 -0400 Subject: HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs Add the new PIDs to wacom_wac.c to support the new models in the Intuos series. [jkosina@suse.cz: fix changelog] Signed-off-by: Joshua Dickens Reviewed-by: Ping Cheng Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index fd51769d0994..33a6908995b1 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -4746,6 +4746,12 @@ static const struct wacom_features wacom_features_0x393 = { "Wacom Intuos Pro S", 31920, 19950, 8191, 63, INTUOSP2S_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 10 }; +static const struct wacom_features wacom_features_0x3c6 = + { "Wacom Intuos BT S", 15200, 9500, 4095, 63, + INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 }; +static const struct wacom_features wacom_features_0x3c8 = + { "Wacom Intuos BT M", 21600, 13500, 4095, 63, + INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 }; static const struct wacom_features wacom_features_HID_ANY_ID = { "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID }; @@ -4919,6 +4925,8 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x37A) }, { USB_DEVICE_WACOM(0x37B) }, { BT_DEVICE_WACOM(0x393) }, + { BT_DEVICE_WACOM(0x3c6) }, + { BT_DEVICE_WACOM(0x3c8) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, -- cgit v1.2.3 From 10d93a98190aec2c3ff98d9472ab1bf0543aa02c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 15 Sep 2021 15:21:08 +0300 Subject: ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: 202acc565a1f0 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Peter Ujfalusi Reviewed-by: Daniel Baluta Reviewed-by: Ranjani Sridharan Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210915122116.18317-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/imx/imx8.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c index 12fedf0984bd..7e9723a10d02 100644 --- a/sound/soc/sof/imx/imx8.c +++ b/sound/soc/sof/imx/imx8.c @@ -365,7 +365,14 @@ static int imx8_remove(struct snd_sof_dev *sdev) /* on i.MX8 there is 1 to 1 match between type and BAR idx */ static int imx8_get_bar_index(struct snd_sof_dev *sdev, u32 type) { - return type; + /* Only IRAM and SRAM bars are valid */ + switch (type) { + case SOF_FW_BLK_TYPE_IRAM: + case SOF_FW_BLK_TYPE_SRAM: + return type; + default: + return -EINVAL; + } } static void imx8_ipc_msg_data(struct snd_sof_dev *sdev, -- cgit v1.2.3 From d9be4a88c3627c270bbe032b623dc43f3b764565 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 15 Sep 2021 15:21:09 +0300 Subject: ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: afb93d716533d ("ASoC: SOF: imx: Add i.MX8M HW support") Signed-off-by: Peter Ujfalusi Reviewed-by: Daniel Baluta Reviewed-by: Ranjani Sridharan Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/imx/imx8m.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c index cb822d953767..892e1482f97f 100644 --- a/sound/soc/sof/imx/imx8m.c +++ b/sound/soc/sof/imx/imx8m.c @@ -228,7 +228,14 @@ static int imx8m_remove(struct snd_sof_dev *sdev) /* on i.MX8 there is 1 to 1 match between type and BAR idx */ static int imx8m_get_bar_index(struct snd_sof_dev *sdev, u32 type) { - return type; + /* Only IRAM and SRAM bars are valid */ + switch (type) { + case SOF_FW_BLK_TYPE_IRAM: + case SOF_FW_BLK_TYPE_SRAM: + return type; + default: + return -EINVAL; + } } static void imx8m_ipc_msg_data(struct snd_sof_dev *sdev, -- cgit v1.2.3 From 8914a7a247e065438a0ec86a58c1c359223d2c9e Mon Sep 17 00:00:00 2001 From: Li Zhijian Date: Wed, 15 Sep 2021 21:45:54 +0800 Subject: selftests: be sure to make khdr before other targets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li Reported-by: kernel test robot Signed-off-by: Li Zhijian Signed-off-by: Shuah Khan --- tools/testing/selftests/lib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index fa2ac0e56b43..fe7ee2b0f29c 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -48,6 +48,7 @@ ARCH ?= $(SUBARCH) # When local build is done, headers are installed in the default # INSTALL_HDR_PATH usr/include. .PHONY: khdr +.NOTPARALLEL: khdr: ifndef KSFT_KHDR_INSTALL_DONE ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) -- cgit v1.2.3 From 37cb28ec7d3a36a5bace7063a3dba633ab110f8b Mon Sep 17 00:00:00 2001 From: Piotr Krysiuk Date: Wed, 15 Sep 2021 17:04:37 +0100 Subject: bpf, mips: Validate conditional branch offsets The conditional branch instructions on MIPS use 18-bit signed offsets allowing for a branch range of 128 KBytes (backward and forward). However, this limit is not observed by the cBPF JIT compiler, and so the JIT compiler emits out-of-range branches when translating certain cBPF programs. A specific example of such a cBPF program is included in the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes anomalous machine code containing incorrect branch offsets under JIT. Furthermore, this issue can be abused to craft undesirable machine code, where the control flow is hijacked to execute arbitrary Kernel code. The following steps can be used to reproduce the issue: # echo 1 > /proc/sys/net/core/bpf_jit_enable # modprobe test_bpf test_name="BPF_MAXINSNS: exec all MSH" This should produce multiple warnings from build_bimm() similar to: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 209 at arch/mips/mm/uasm-mips.c:210 build_insn+0x558/0x590 Micro-assembler field overflow Modules linked in: test_bpf(+) CPU: 0 PID: 209 Comm: modprobe Not tainted 5.14.3 #1 Stack : 00000000 807bb824 82b33c9c 801843c0 00000000 00000004 00000000 63c9b5ee 82b33af4 80999898 80910000 80900000 82fd6030 00000001 82b33a98 82087180 00000000 00000000 80873b28 00000000 000000fc 82b3394c 00000000 2e34312e 6d6d6f43 809a180f 809a1836 6f6d203a 80900000 00000001 82b33bac 80900000 00027f80 00000000 00000000 807bb824 00000000 804ed790 001cc317 00000001 [...] Call Trace: [<80108f44>] show_stack+0x38/0x118 [<807a7aac>] dump_stack_lvl+0x5c/0x7c [<807a4b3c>] __warn+0xcc/0x140 [<807a4c3c>] warn_slowpath_fmt+0x8c/0xb8 [<8011e198>] build_insn+0x558/0x590 [<8011e358>] uasm_i_bne+0x20/0x2c [<80127b48>] build_body+0xa58/0x2a94 [<80129c98>] bpf_jit_compile+0x114/0x1e4 [<80613fc4>] bpf_prepare_filter+0x2ec/0x4e4 [<8061423c>] bpf_prog_create+0x80/0xc4 [] test_bpf_init+0x300/0xba8 [test_bpf] [<8010051c>] do_one_initcall+0x50/0x1d4 [<801c5e54>] do_init_module+0x60/0x220 [<801c8b20>] sys_finit_module+0xc4/0xfc [<801144d0>] syscall_common+0x34/0x58 [...] ---[ end trace a287d9742503c645 ]--- Then the anomalous machine code executes: => 0xc0a18000: addiu sp,sp,-16 0xc0a18004: sw s3,0(sp) 0xc0a18008: sw s4,4(sp) 0xc0a1800c: sw s5,8(sp) 0xc0a18010: sw ra,12(sp) 0xc0a18014: move s5,a0 0xc0a18018: move s4,zero 0xc0a1801c: move s3,zero # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a18020: lui t6,0x8012 0xc0a18024: ori t4,t6,0x9e14 0xc0a18028: li a1,0 0xc0a1802c: jalr t4 0xc0a18030: move a0,s5 0xc0a18034: bnez v0,0xc0a1ffb8 # incorrect branch offset 0xc0a18038: move v0,zero 0xc0a1803c: andi s4,s3,0xf 0xc0a18040: b 0xc0a18048 0xc0a18044: sll s4,s4,0x2 [...] # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a1ffa0: lui t6,0x8012 0xc0a1ffa4: ori t4,t6,0x9e14 0xc0a1ffa8: li a1,0 0xc0a1ffac: jalr t4 0xc0a1ffb0: move a0,s5 0xc0a1ffb4: bnez v0,0xc0a1ffb8 # incorrect branch offset 0xc0a1ffb8: move v0,zero 0xc0a1ffbc: andi s4,s3,0xf 0xc0a1ffc0: b 0xc0a1ffc8 0xc0a1ffc4: sll s4,s4,0x2 # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a1ffc8: lui t6,0x8012 0xc0a1ffcc: ori t4,t6,0x9e14 0xc0a1ffd0: li a1,0 0xc0a1ffd4: jalr t4 0xc0a1ffd8: move a0,s5 0xc0a1ffdc: bnez v0,0xc0a3ffb8 # correct branch offset 0xc0a1ffe0: move v0,zero 0xc0a1ffe4: andi s4,s3,0xf 0xc0a1ffe8: b 0xc0a1fff0 0xc0a1ffec: sll s4,s4,0x2 [...] # epilogue 0xc0a3ffb8: lw s3,0(sp) 0xc0a3ffbc: lw s4,4(sp) 0xc0a3ffc0: lw s5,8(sp) 0xc0a3ffc4: lw ra,12(sp) 0xc0a3ffc8: addiu sp,sp,16 0xc0a3ffcc: jr ra 0xc0a3ffd0: nop To mitigate this issue, we assert the branch ranges for each emit call that could generate an out-of-range branch. Fixes: 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT") Fixes: c6610de353da ("MIPS: net: Add BPF JIT") Signed-off-by: Piotr Krysiuk Signed-off-by: Daniel Borkmann Tested-by: Johan Almbladh Acked-by: Johan Almbladh Cc: Paul Burton Cc: Thomas Bogendoerfer Link: https://lore.kernel.org/bpf/20210915160437.4080-1-piotras@gmail.com --- arch/mips/net/bpf_jit.c | 57 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 14 deletions(-) diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 0af88622c619..cb6d22439f71 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -662,6 +662,11 @@ static void build_epilogue(struct jit_ctx *ctx) ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \ func##_positive) +static bool is_bad_offset(int b_off) +{ + return b_off > 0x1ffff || b_off < -0x20000; +} + static int build_body(struct jit_ctx *ctx) { const struct bpf_prog *prog = ctx->skf; @@ -728,7 +733,10 @@ load_common: /* Load return register on DS for failures */ emit_reg_move(r_ret, r_zero, ctx); /* Return with error */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); break; case BPF_LD | BPF_W | BPF_IND: @@ -775,8 +783,10 @@ load_ind: emit_jalr(MIPS_R_RA, r_s0, ctx); emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */ /* Check the error value */ - emit_bcond(MIPS_COND_NE, r_ret, 0, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_NE, r_ret, 0, b_off, ctx); emit_reg_move(r_ret, r_zero, ctx); /* We are good */ /* X <- P[1:K] & 0xf */ @@ -855,8 +865,10 @@ load_ind: /* A /= X */ ctx->flags |= SEEN_X | SEEN_A; /* Check if r_X is zero */ - emit_bcond(MIPS_COND_EQ, r_X, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx); emit_load_imm(r_ret, 0, ctx); /* delay slot */ emit_div(r_A, r_X, ctx); break; @@ -864,8 +876,10 @@ load_ind: /* A %= X */ ctx->flags |= SEEN_X | SEEN_A; /* Check if r_X is zero */ - emit_bcond(MIPS_COND_EQ, r_X, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx); emit_load_imm(r_ret, 0, ctx); /* delay slot */ emit_mod(r_A, r_X, ctx); break; @@ -926,7 +940,10 @@ load_ind: break; case BPF_JMP | BPF_JA: /* pc += K */ - emit_b(b_imm(i + k + 1, ctx), ctx); + b_off = b_imm(i + k + 1, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); break; case BPF_JMP | BPF_JEQ | BPF_K: @@ -1056,12 +1073,16 @@ jmp_cmp: break; case BPF_RET | BPF_A: ctx->flags |= SEEN_A; - if (i != prog->len - 1) + if (i != prog->len - 1) { /* * If this is not the last instruction * then jump to the epilogue */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); + } emit_reg_move(r_ret, r_A, ctx); /* delay slot */ break; case BPF_RET | BPF_K: @@ -1075,7 +1096,10 @@ jmp_cmp: * If this is not the last instruction * then jump to the epilogue */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); } break; @@ -1133,8 +1157,10 @@ jmp_cmp: /* Load *dev pointer */ emit_load_ptr(r_s0, r_skb, off, ctx); /* error (0) in the delay slot */ - emit_bcond(MIPS_COND_EQ, r_s0, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_s0, r_zero, b_off, ctx); emit_reg_move(r_ret, r_zero, ctx); if (code == (BPF_ANC | SKF_AD_IFINDEX)) { BUILD_BUG_ON(sizeof_field(struct net_device, ifindex) != 4); @@ -1244,7 +1270,10 @@ void bpf_jit_compile(struct bpf_prog *fp) /* Generate the actual JIT code */ build_prologue(&ctx); - build_body(&ctx); + if (build_body(&ctx)) { + module_memfree(ctx.target); + goto out; + } build_epilogue(&ctx); /* Update the icache */ -- cgit v1.2.3 From 34331739e19fd6a293d488add28832ad49c9fc54 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Tue, 10 Aug 2021 09:40:36 -0700 Subject: fpga: machxo2-spi: Return an error on failure Earlier successes leave 'ret' in a non error state, so these errors are not reported. Set ret to -EINVAL before going to the error handler. This addresses two issues reported by smatch: drivers/fpga/machxo2-spi.c:229 machxo2_write_init() warn: missing error code 'ret' drivers/fpga/machxo2-spi.c:316 machxo2_write_complete() warn: missing error code 'ret' [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Dan Carpenter Signed-off-by: Tom Rix Signed-off-by: Moritz Fischer --- drivers/fpga/machxo2-spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index 1afb41aa20d7..b4a530a31302 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -225,8 +225,10 @@ static int machxo2_write_init(struct fpga_manager *mgr, goto fail; get_status(spi, &status); - if (test_bit(FAIL, &status)) + if (test_bit(FAIL, &status)) { + ret = -EINVAL; goto fail; + } dump_status_reg(&status); spi_message_init(&msg); @@ -313,6 +315,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, dump_status_reg(&status); if (!test_bit(DONE, &status)) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } -- cgit v1.2.3 From a1e4470823d99e75b596748086e120dea169ed3c Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Fri, 13 Aug 2021 14:40:42 +0800 Subject: fpga: machxo2-spi: Fix missing error code in machxo2_write_complete() The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'ret'. Eliminate the follow smatch warning: drivers/fpga/machxo2-spi.c:341 machxo2_write_complete() warn: missing error code 'ret'. [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Moritz Fischer --- drivers/fpga/machxo2-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index b4a530a31302..ea2ec3c6815c 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -338,6 +338,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, break; if (++refreshloop == MACHXO2_MAX_REFRESH_LOOP) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } } while (1); -- cgit v1.2.3 From 17ac76e050c51497e75871a43aa3328ba54cdafd Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Tue, 31 Aug 2021 15:49:58 +0800 Subject: drm/exynos: Make use of the helper function devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +----- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 4 +--- drivers/gpu/drm/exynos/exynos_hdmi.c | 4 +--- 9 files changed, 9 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 9870c4e6af36..b5001db7a95c 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -793,7 +793,6 @@ static int exynos5433_decon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct decon_context *ctx; - struct resource *res; int ret; int i; @@ -818,8 +817,7 @@ static int exynos5433_decon_probe(struct platform_device *pdev) ctx->clks[i] = clk; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->addr = devm_ioremap_resource(dev, res); + ctx->addr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->addr)) return PTR_ERR(ctx->addr); diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index e39fac889edc..8d137857818c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1738,7 +1738,6 @@ static const struct component_ops exynos_dsi_component_ops = { static int exynos_dsi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct exynos_dsi *dsi; int ret, i; @@ -1789,8 +1788,7 @@ static int exynos_dsi_probe(struct platform_device *pdev) } } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dsi->reg_base = devm_ioremap_resource(dev, res); + dsi->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(dsi->reg_base)) return PTR_ERR(dsi->reg_base); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index a3c718148c45..ecfd82d0afb7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -85,7 +85,6 @@ struct fimc_scaler { /* * A structure of fimc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @lock: locking of operations. * @clocks: fimc clocks. @@ -103,7 +102,6 @@ struct fimc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; spinlock_t lock; struct clk *clocks[FIMC_CLKS_MAX]; @@ -1327,8 +1325,7 @@ static int fimc_probe(struct platform_device *pdev) ctx->num_formats = num_formats; /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 700ca4fa6665..c735e53939d8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -1202,9 +1202,7 @@ static int fimd_probe(struct platform_device *pdev) return PTR_ERR(ctx->lcd_clk); } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - ctx->regs = devm_ioremap_resource(dev, res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index b00230626c6a..471fd6c8135f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1449,7 +1449,6 @@ static const struct component_ops g2d_component_ops = { static int g2d_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct g2d_data *g2d; int ret; @@ -1491,9 +1490,7 @@ static int g2d_probe(struct platform_device *pdev) clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - g2d->regs = devm_ioremap_resource(dev, res); + g2d->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 90d7bf906885..166a80262896 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -86,7 +86,6 @@ struct gsc_scaler { /* * A structure of gsc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @gsc_clk: gsc gate clock. * @sc: scaler infomations. @@ -103,7 +102,6 @@ struct gsc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; const char **clk_names; struct clk *clocks[GSC_MAX_CLOCKS]; @@ -1272,9 +1270,7 @@ static int gsc_probe(struct platform_device *pdev) } } - /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index ee61be4cf152..dec7df35baa9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -278,7 +278,6 @@ static const struct component_ops rotator_component_ops = { static int rotator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct rot_context *rot; const struct rot_variant *variant; int irq; @@ -292,8 +291,7 @@ static int rotator_probe(struct platform_device *pdev) rot->formats = variant->formats; rot->num_formats = variant->num_formats; rot->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - rot->regs = devm_ioremap_resource(dev, regs_res); + rot->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(rot->regs)) return PTR_ERR(rot->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index f9ae5b038d59..3a7851b7dc66 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -485,7 +485,6 @@ static const struct component_ops scaler_component_ops = { static int scaler_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct scaler_context *scaler; int irq; int ret, i; @@ -498,8 +497,7 @@ static int scaler_probe(struct platform_device *pdev) (struct scaler_data *)of_device_get_match_data(dev); scaler->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - scaler->regs = devm_ioremap_resource(dev, regs_res); + scaler->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(scaler->regs)) return PTR_ERR(scaler->regs); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index c769dec576de..7655142a4651 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1957,7 +1957,6 @@ static int hdmi_probe(struct platform_device *pdev) struct hdmi_audio_infoframe *audio_infoframe; struct device *dev = &pdev->dev; struct hdmi_context *hdata; - struct resource *res; int ret; hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); @@ -1979,8 +1978,7 @@ static int hdmi_probe(struct platform_device *pdev) return ret; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hdata->regs = devm_ioremap_resource(dev, res); + hdata->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hdata->regs)) { ret = PTR_ERR(hdata->regs); return ret; -- cgit v1.2.3 From d46ef750ed58cbeeba2d9a55c99231c30a172764 Mon Sep 17 00:00:00 2001 From: Evgeny Novikov Date: Tue, 1 Jun 2021 19:38:01 +0300 Subject: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase] Signed-off-by: Evgeny Novikov Acked-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 79b138fd4261..9a1824757aae 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -251,6 +251,10 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i return rc; } + rc = amd_sfh_hid_client_init(privdata); + if (rc) + return rc; + privdata->cl_data = devm_kzalloc(&pdev->dev, sizeof(struct amdtp_cl_data), GFP_KERNEL); if (!privdata->cl_data) return -ENOMEM; @@ -261,7 +265,7 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i mp2_select_ops(privdata); - return amd_sfh_hid_client_init(privdata); + return 0; } static int __maybe_unused amd_mp2_pci_resume(struct device *dev) -- cgit v1.2.3 From 5297cfa6bdf93e3889f78f9b482e2a595a376083 Mon Sep 17 00:00:00 2001 From: Sai Krishna Potthuri Date: Wed, 18 Aug 2021 12:53:14 +0530 Subject: EDAC/synopsys: Fix wrong value type assignment for edac_mode dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com --- drivers/edac/synopsys_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 7e7146b22c16..7d08627e738b 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -782,7 +782,7 @@ static void init_csrows(struct mem_ctl_info *mci) for (j = 0; j < csi->nr_channels; j++) { dimm = csi->channels[j]->dimm; - dimm->edac_mode = EDAC_FLAG_SECDED; + dimm->edac_mode = EDAC_SECDED; dimm->mtype = p_data->get_mtype(priv->baseaddr); dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; dimm->grain = SYNPS_EDAC_ERR_GRAIN; -- cgit v1.2.3 From 1511df6f5e9ef32826f20db2ee81f8527154dc14 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Tue, 7 Sep 2021 11:58:59 +0200 Subject: s390/bpf: Fix branch shortening during codegen pass EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by: Johan Almbladh Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 88419263a89a..c3bd630e9b43 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -248,8 +248,7 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1) #define EMIT6_PCREL(op1, op2, b1, b2, i, off, mask) \ ({ \ - /* Branch instruction needs 6 bytes */ \ - int rel = (addrs[(i) + (off) + 1] - (addrs[(i) + 1] - 6)) / 2;\ + int rel = (addrs[(i) + (off) + 1] - jit->prg) / 2; \ _EMIT6((op1) | reg(b1, b2) << 16 | (rel & 0xffff), (op2) | (mask));\ REG_SET_SEEN(b1); \ REG_SET_SEEN(b2); \ -- cgit v1.2.3 From 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Tue, 7 Sep 2021 13:41:16 +0200 Subject: s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index c3bd630e9b43..245f98d5f690 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -794,8 +794,13 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ if (!imm) break; - /* agfi %dst,-imm */ - EMIT6_IMM(0xc2080000, dst_reg, -imm); + if (imm == -0x80000000) { + /* algfi %dst,0x80000000 */ + EMIT6_IMM(0xc20a0000, dst_reg, 0x80000000); + } else { + /* agfi %dst,-imm */ + EMIT6_IMM(0xc2080000, dst_reg, -imm); + } break; /* * BPF_MUL -- cgit v1.2.3 From db7bee653859ef7179be933e7d1384644f795f26 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Mon, 6 Sep 2021 15:04:14 +0200 Subject: s390/bpf: Fix optimizing out zero-extensions Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by: Johan Almbladh Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 58 +++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 245f98d5f690..840d8594437d 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -760,10 +760,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9080000, dst_reg, src_reg); break; case BPF_ALU | BPF_ADD | BPF_K: /* dst = (u32) dst + (u32) imm */ - if (!imm) - break; - /* alfi %dst,imm */ - EMIT6_IMM(0xc20b0000, dst_reg, imm); + if (imm != 0) { + /* alfi %dst,imm */ + EMIT6_IMM(0xc20b0000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_ADD | BPF_K: /* dst = dst + imm */ @@ -785,10 +785,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9090000, dst_reg, src_reg); break; case BPF_ALU | BPF_SUB | BPF_K: /* dst = (u32) dst - (u32) imm */ - if (!imm) - break; - /* alfi %dst,-imm */ - EMIT6_IMM(0xc20b0000, dst_reg, -imm); + if (imm != 0) { + /* alfi %dst,-imm */ + EMIT6_IMM(0xc20b0000, dst_reg, -imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ @@ -815,10 +815,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb90c0000, dst_reg, src_reg); break; case BPF_ALU | BPF_MUL | BPF_K: /* dst = (u32) dst * (u32) imm */ - if (imm == 1) - break; - /* msfi %r5,imm */ - EMIT6_IMM(0xc2010000, dst_reg, imm); + if (imm != 1) { + /* msfi %r5,imm */ + EMIT6_IMM(0xc2010000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_MUL | BPF_K: /* dst = dst * imm */ @@ -871,6 +871,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, if (BPF_OP(insn->code) == BPF_MOD) /* lhgi %dst,0 */ EMIT4_IMM(0xa7090000, dst_reg, 0); + else + EMIT_ZERO(dst_reg); break; } /* lhi %w0,0 */ @@ -1003,10 +1005,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9820000, dst_reg, src_reg); break; case BPF_ALU | BPF_XOR | BPF_K: /* dst = (u32) dst ^ (u32) imm */ - if (!imm) - break; - /* xilf %dst,imm */ - EMIT6_IMM(0xc0070000, dst_reg, imm); + if (imm != 0) { + /* xilf %dst,imm */ + EMIT6_IMM(0xc0070000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_XOR | BPF_K: /* dst = dst ^ imm */ @@ -1037,10 +1039,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_LSH | BPF_K: /* dst = (u32) dst << (u32) imm */ - if (imm == 0) - break; - /* sll %dst,imm(%r0) */ - EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* sll %dst,imm(%r0) */ + EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_LSH | BPF_K: /* dst = dst << imm */ @@ -1062,10 +1064,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_RSH | BPF_K: /* dst = (u32) dst >> (u32) imm */ - if (imm == 0) - break; - /* srl %dst,imm(%r0) */ - EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* srl %dst,imm(%r0) */ + EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_RSH | BPF_K: /* dst = dst >> imm */ @@ -1087,10 +1089,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_ARSH | BPF_K: /* ((s32) dst >> imm */ - if (imm == 0) - break; - /* sra %dst,imm(%r0) */ - EMIT4_DISP(0x8a000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* sra %dst,imm(%r0) */ + EMIT4_DISP(0x8a000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_ARSH | BPF_K: /* ((s64) dst) >>= imm */ -- cgit v1.2.3 From 54607282fae6148641a08d81a6e0953b541249c7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 16 Sep 2021 10:44:06 +0200 Subject: EDAC/dmc520: Assign the proper type to dimm->edac_mode dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520") Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210916085258.7544-1-bp@alien8.de --- drivers/edac/dmc520_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c index fc1153ab1ebb..b8a7d9594afd 100644 --- a/drivers/edac/dmc520_edac.c +++ b/drivers/edac/dmc520_edac.c @@ -464,7 +464,7 @@ static void dmc520_init_csrow(struct mem_ctl_info *mci) dimm->grain = pvt->mem_width_in_bytes; dimm->dtype = dt; dimm->mtype = mt; - dimm->edac_mode = EDAC_FLAG_SECDED; + dimm->edac_mode = EDAC_SECDED; dimm->nr_pages = pages_per_rank / csi->nr_channels; } } -- cgit v1.2.3 From be830389bd49d3f1f8737bd45513361628641c08 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 14 Sep 2021 14:08:47 +0300 Subject: ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition The following preprocessor directive is non-compliant: #undef PCXHR_REG_TO_PORT(x) gcc warns about extra tokens but nobody sees them as they are under if branch which is never parsed. Make it an #error, it is not clear to me what the author meant. Signed-off-by: Alexey Dobriyan Link: https://lore.kernel.org/r/YUCCv47sm4zf9OVO@localhost.localdomain Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c index 87d24224c042..23f253effb4f 100644 --- a/sound/pci/pcxhr/pcxhr_core.c +++ b/sound/pci/pcxhr/pcxhr_core.c @@ -52,7 +52,7 @@ #define PCXHR_DSP 2 #if (PCXHR_DSP_OFFSET_MAX > PCXHR_PLX_OFFSET_MIN) -#undef PCXHR_REG_TO_PORT(x) +#error PCXHR_REG_TO_PORT(x) #else #define PCXHR_REG_TO_PORT(x) ((x)>PCXHR_DSP_OFFSET_MAX ? PCXHR_PLX : PCXHR_DSP) #endif -- cgit v1.2.3 From 94d508fa3186d0cbc63765aa94d5cf3bd847694c Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Thu, 16 Sep 2021 10:56:46 +0100 Subject: ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack Dell's requirement to have headset mic as phantom jack on this specific dolphin hardware platform. Signed-off-by: Stefan Binding Signed-off-by: Vitaly Rodionov Link: https://lore.kernel.org/r/20210916095646.7631-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_cs8409.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c index 3c7ef55d016e..31ff11ab868e 100644 --- a/sound/pci/hda/patch_cs8409.c +++ b/sound/pci/hda/patch_cs8409.c @@ -1207,6 +1207,9 @@ void dolphin_fixups(struct hda_codec *codec, const struct hda_fixup *fix, int ac snd_hda_jack_add_kctl(codec, DOLPHIN_LO_PIN_NID, "Line Out", true, SND_JACK_HEADPHONE, NULL); + snd_hda_jack_add_kctl(codec, DOLPHIN_AMIC_PIN_NID, "Microphone", true, + SND_JACK_MICROPHONE, NULL); + cs8409_fix_caps(codec, DOLPHIN_HP_PIN_NID); cs8409_fix_caps(codec, DOLPHIN_LO_PIN_NID); cs8409_fix_caps(codec, DOLPHIN_AMIC_PIN_NID); -- cgit v1.2.3 From 5aeb05b27f81269a2bf2e15eab9fc0f9a400d3a8 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 15 Sep 2021 11:09:39 +0300 Subject: software node: balance refcount for managed software nodes software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed software nodes, thus leading to underflow errors. Balance the refcount by bumping it in the device_create_managed_software_node() function. The error [1] was encountered after adding a .shutdown() op to our fsl-mc-bus driver. [1] pc : refcount_warn_saturate+0xf8/0x150 lr : refcount_warn_saturate+0xf8/0x150 sp : ffff80001009b920 x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000 x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030 x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000 x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607 x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17 x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670 x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000 Call trace: refcount_warn_saturate+0xf8/0x150 kobject_put+0x10c/0x120 software_node_notify+0xd8/0x140 device_platform_notify+0x4c/0xb4 device_del+0x188/0x424 fsl_mc_device_remove+0x2c/0x4c rebofind sp.c__fsl_mc_device_remove+0x14/0x2c device_for_each_child+0x5c/0xac dprc_remove+0x9c/0xc0 fsl_mc_driver_remove+0x28/0x64 __device_release_driver+0x188/0x22c device_release_driver+0x30/0x50 bus_remove_device+0x128/0x134 device_del+0x16c/0x424 fsl_mc_bus_remove+0x8c/0x114 fsl_mc_bus_shutdown+0x14/0x20 platform_shutdown+0x28/0x40 device_shutdown+0x15c/0x330 __do_sys_reboot+0x218/0x2a0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common+0x40/0xdc do_el0_svc+0x2c/0x94 el0_svc+0x2c/0x54 el0t_64_sync_handler+0xa8/0x12c el0t_64_sync+0x198/0x19c ---[ end trace 32eb1c71c7d86821 ]--- Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()") Reported-by: Jon Nettleton Suggested-by: Heikki Krogerus Reviewed-by: Heikki Krogerus Signed-off-by: Laurentiu Tudor Cc: 5.12+ # 5.12+ [ rjw: Fix up the software_node_notify() invocation ] Signed-off-by: Rafael J. Wysocki --- drivers/base/swnode.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c index 7bd0f3cfb7eb..c46f6a8e14d2 100644 --- a/drivers/base/swnode.c +++ b/drivers/base/swnode.c @@ -1116,6 +1116,9 @@ int device_create_managed_software_node(struct device *dev, to_swnode(fwnode)->managed = true; set_secondary_fwnode(dev, fwnode); + if (device_is_registered(dev)) + software_node_notify(dev); + return 0; } EXPORT_SYMBOL_GPL(device_create_managed_software_node); -- cgit v1.2.3 From 8a8e1813ffc35111fc0b6db49968ceb0e1615ced Mon Sep 17 00:00:00 2001 From: Marc Herbert Date: Thu, 16 Sep 2021 11:50:08 +0300 Subject: ASoC: SOF: loader: release_firmware() on load failure to avoid batching Invoke release_firmware() when the firmware fails to boot in sof_probe_continue(). The request_firmware() framework must be informed of failures in sof_probe_continue() otherwise its internal "batching" feature (different from caching) cached the firmware image forever. Attempts to correct the file in /lib/firmware/ were then silently and confusingly ignored until the next reboot. Unloading the drivers did not help because from their disconnected perspective the firmware had failed so there was nothing to release. Also leverage the new snd_sof_fw_unload() function to simplify the snd_sof_device_remove() function. Signed-off-by: Marc Herbert Reviewed-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/core.c | 4 +--- sound/soc/sof/loader.c | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 3e4dd4a86363..59d0d7b2b55c 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -371,7 +371,6 @@ int snd_sof_device_remove(struct device *dev) dev_warn(dev, "error: %d failed to prepare DSP for device removal", ret); - snd_sof_fw_unload(sdev); snd_sof_ipc_free(sdev); snd_sof_free_debug(sdev); snd_sof_free_trace(sdev); @@ -394,8 +393,7 @@ int snd_sof_device_remove(struct device *dev) snd_sof_remove(sdev); /* release firmware */ - release_firmware(pdata->fw); - pdata->fw = NULL; + snd_sof_fw_unload(sdev); return 0; } diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index 2b38a77cd594..9c3f251a0dd0 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -880,5 +880,7 @@ EXPORT_SYMBOL(snd_sof_run_firmware); void snd_sof_fw_unload(struct snd_sof_dev *sdev) { /* TODO: support module unloading at runtime */ + release_firmware(sdev->pdata->fw); + sdev->pdata->fw = NULL; } EXPORT_SYMBOL(snd_sof_fw_unload); -- cgit v1.2.3 From 25766ee44ff8db4cdf8471b587dffb28b7b9d17f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 16 Sep 2021 11:53:42 +0300 Subject: ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication In case the firmware is missing we will have the following in the kernel log: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: request firmware intel/sof/sof-tgl-h.ri failed err: -2 3 | you may need to download the firmware from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 The first line is the standard, request_firmware() warning. The second and third line is printed in snd_sof_load_firmware_raw() Note that the first and second line is mostly identical. With this patch the log will be changed to: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: sof firmware file is missing, you might need to 3 | download it from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210916085342.29993-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/loader.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index 9c3f251a0dd0..bb79c77775b3 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -729,10 +729,10 @@ int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev) ret = request_firmware(&plat_data->fw, fw_filename, sdev->dev); if (ret < 0) { - dev_err(sdev->dev, "error: request firmware %s failed err: %d\n", - fw_filename, ret); dev_err(sdev->dev, - "you may need to download the firmware from https://github.com/thesofproject/sof-bin/\n"); + "error: sof firmware file is missing, you might need to\n"); + dev_err(sdev->dev, + " download it from https://github.com/thesofproject/sof-bin/\n"); goto err; } else { dev_dbg(sdev->dev, "request_firmware %s successful\n", -- cgit v1.2.3 From 7d95995ab4de07ee642c925aa6dbf6d07069a751 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 11:34:38 +0300 Subject: fs/ntfs3: Remove '+' before constant in ni_insert_resident() No need for plus sign here. So remove it. Checkpatch will also be happy. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 080264ced909..df41eae8f7e1 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -1448,7 +1448,7 @@ int ni_insert_resident(struct ntfs_inode *ni, u32 data_size, attr->res.flags = RESIDENT_FLAG_INDEXED; /* is_attr_indexed(attr)) == true */ - le16_add_cpu(&ni->mi.mrec->hard_links, +1); + le16_add_cpu(&ni->mi.mrec->hard_links, 1); ni->mi.dirty = true; } attr->res.res = 0; -- cgit v1.2.3 From 4ca7fe57f21a25afc4a651db5145bfe090c6248f Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 11:34:39 +0300 Subject: fs/ntfs3: Place Comparisons constant right side of the test For better code readability place constant always right side of the test. This will also address checkpatch warning. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index df41eae8f7e1..2f8af53da219 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -1603,7 +1603,7 @@ struct ATTR_FILE_NAME *ni_fname_type(struct ntfs_inode *ni, u8 name_type, *le = NULL; - if (FILE_NAME_POSIX == name_type) + if (name_type == FILE_NAME_POSIX) return NULL; /* Enumerate all names. */ -- cgit v1.2.3 From 2829e39e0e8add377508b3c6ef4cf48e6db324fb Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 11:34:40 +0300 Subject: fs/ntfs3: Remove braces from single statment block Remove braces from single statment block as they are not needed. Also Linux kernel coding style guide recommend this and checkpatch warn about this. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 2f8af53da219..1e1a09034f65 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -2903,9 +2903,8 @@ bool ni_remove_name_undo(struct ntfs_inode *dir_ni, struct ntfs_inode *ni, memcpy(Add2Ptr(attr, SIZEOF_RESIDENT), de + 1, de_key_size); mi_get_ref(&ni->mi, &de->ref); - if (indx_insert_entry(&dir_ni->dir, dir_ni, de, sbi, NULL, 1)) { + if (indx_insert_entry(&dir_ni->dir, dir_ni, de, sbi, NULL, 1)) return false; - } } return true; -- cgit v1.2.3 From cffb5152eea82de890dd418a90612aede96068d6 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 11:34:41 +0300 Subject: fs/ntfs3: Remove tabs before spaces from comment Remove tabs before spaces from comment as recommended by kernel coding style. Checkpatch also warn about these. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/lznt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/lznt.c b/fs/ntfs3/lznt.c index 12ba42518efe..28f654561f27 100644 --- a/fs/ntfs3/lznt.c +++ b/fs/ntfs3/lznt.c @@ -292,7 +292,7 @@ next: /* * get_lznt_ctx * @level: 0 - Standard compression. - * !0 - Best compression, requires a lot of cpu. + * !0 - Best compression, requires a lot of cpu. */ struct lznt *get_lznt_ctx(int level) { -- cgit v1.2.3 From edb853ff3dc01c22577ea5d0383d067b68a6d663 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 17:28:39 +0300 Subject: fs/ntfs3: Fix ntfs_look_for_free_space() does only report -ENOSPC If ntfs_refresh_zone() returns error it will be changed to -ENOSPC. It is not right. Also caller of this functions also check other errors. Fixes: 78ab59fee07f ("fs/ntfs3: Rework file operations") Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/fsntfs.c | 51 +++++++++++++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 24 deletions(-) diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 9232a7f410c6..e77fad89eaed 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -357,7 +357,7 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, enum ALLOCATE_OPT opt) { int err; - CLST alen = 0; + CLST alen; struct super_block *sb = sbi->sb; size_t alcn, zlen, zeroes, zlcn, zlen2, ztrim, new_zlen; struct wnd_bitmap *wnd = &sbi->used.bitmap; @@ -369,13 +369,15 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, if (!zlen) { err = ntfs_refresh_zone(sbi); if (err) - goto out; + goto up_write; + zlen = wnd_zone_len(wnd); } if (!zlen) { ntfs_err(sbi->sb, "no free space to extend mft"); - goto out; + err = -ENOSPC; + goto up_write; } lcn = wnd_zone_bit(wnd); @@ -384,12 +386,11 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, wnd_zone_set(wnd, lcn + alen, zlen - alen); err = wnd_set_used(wnd, lcn, alen); - if (err) { - up_write(&wnd->rw_lock); - return err; - } + if (err) + goto up_write; + alcn = lcn; - goto out; + goto space_found; } /* * 'Cause cluster 0 is always used this value means that we should use @@ -403,15 +404,17 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, alen = wnd_find(wnd, len, lcn, BITMAP_FIND_MARK_AS_USED, &alcn); if (alen) - goto out; + goto space_found; /* Try to use clusters from MftZone. */ zlen = wnd_zone_len(wnd); zeroes = wnd_zeroes(wnd); /* Check too big request */ - if (len > zeroes + zlen || zlen <= NTFS_MIN_MFT_ZONE) - goto out; + if (len > zeroes + zlen || zlen <= NTFS_MIN_MFT_ZONE) { + err = -ENOSPC; + goto up_write; + } /* How many clusters to cat from zone. */ zlcn = wnd_zone_bit(wnd); @@ -430,22 +433,22 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, /* Allocate continues clusters. */ alen = wnd_find(wnd, len, 0, BITMAP_FIND_MARK_AS_USED | BITMAP_FIND_FULL, &alcn); - -out: - if (alen) { - err = 0; - *new_len = alen; - *new_lcn = alcn; - - ntfs_unmap_meta(sb, alcn, alen); - - /* Set hint for next requests. */ - if (!(opt & ALLOCATE_MFT)) - sbi->used.next_free_lcn = alcn + alen; - } else { + if (!alen) { err = -ENOSPC; + goto up_write; } +space_found: + err = 0; + *new_len = alen; + *new_lcn = alcn; + + ntfs_unmap_meta(sb, alcn, alen); + + /* Set hint for next requests. */ + if (!(opt & ALLOCATE_MFT)) + sbi->used.next_free_lcn = alcn + alen; +up_write: up_write(&wnd->rw_lock); return err; } -- cgit v1.2.3 From f162f7b8dbc29742896f8a7e678bb31192716ae0 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 17:28:40 +0300 Subject: fs/ntfs3: Remove always false condition check We do not need this check as this is same thing as NTFS_MIN_MFT_ZONE > zlen. We already check NTFS_MIN_MFT_ZONE <= zlen and exit because is too big request. Remove it so code is cleaner. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/fsntfs.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index e77fad89eaed..4cd24e4e58ff 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -422,11 +422,8 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, ztrim = len > zlen ? zlen : (len > zlen2 ? len : zlen2); new_zlen = zlen - ztrim; - if (new_zlen < NTFS_MIN_MFT_ZONE) { + if (new_zlen < NTFS_MIN_MFT_ZONE) new_zlen = NTFS_MIN_MFT_ZONE; - if (new_zlen > zlen) - new_zlen = zlen; - } wnd_zone_set(wnd, zlcn, new_zlen); -- cgit v1.2.3 From b5322eb1ae94572f5a52e804857e641b846059f4 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 17:28:41 +0300 Subject: fs/ntfs3: Use clamp/max macros instead of comparisons We can make code little more readable by using kernel macros clamp/max. This were found with kernel included Coccinelle minmax script. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/fsntfs.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 4cd24e4e58ff..c964d3996aab 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "debug.h" #include "ntfs.h" @@ -419,11 +420,8 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, /* How many clusters to cat from zone. */ zlcn = wnd_zone_bit(wnd); zlen2 = zlen >> 1; - ztrim = len > zlen ? zlen : (len > zlen2 ? len : zlen2); - new_zlen = zlen - ztrim; - - if (new_zlen < NTFS_MIN_MFT_ZONE) - new_zlen = NTFS_MIN_MFT_ZONE; + ztrim = clamp_val(len, zlen2, zlen); + new_zlen = max_t(size_t, zlen - ztrim, NTFS_MIN_MFT_ZONE); wnd_zone_set(wnd, zlcn, new_zlen); -- cgit v1.2.3 From 6e3331ee34461be37f50912295a2e924a673dbc6 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 7 Sep 2021 17:28:42 +0300 Subject: fs/ntfs3: Use min/max macros instated of ternary operators We can make code little bit more readable by using min/max macros. These were found with Coccinelle. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/attrib.c | 3 ++- fs/ntfs3/bitmap.c | 11 ++++++----- fs/ntfs3/fsntfs.c | 6 +++--- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 12cff28f3e71..c15cc17e3cd9 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -8,6 +8,7 @@ #include #include +#include #include "debug.h" #include "ntfs.h" @@ -1961,7 +1962,7 @@ int attr_punch_hole(struct ntfs_inode *ni, u64 vbo, u64 bytes, u32 *frame_size) return 0; from = vbo; - to = (vbo + bytes) < data_size ? (vbo + bytes) : data_size; + to = min_t(u64, vbo + bytes, data_size); memset(Add2Ptr(resident_data(attr_b), from), 0, to - from); return 0; } diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c index a03584674fea..aa184407520f 100644 --- a/fs/ntfs3/bitmap.c +++ b/fs/ntfs3/bitmap.c @@ -12,6 +12,7 @@ #include #include +#include #include "ntfs.h" #include "ntfs_fs.h" @@ -432,7 +433,7 @@ static void wnd_remove_free_ext(struct wnd_bitmap *wnd, size_t bit, size_t len) ; } else { n3 = rb_next(&e->count.node); - max_new_len = len > new_len ? len : new_len; + max_new_len = max(len, new_len); if (!n3) { wnd->extent_max = max_new_len; } else { @@ -728,7 +729,7 @@ int wnd_set_free(struct wnd_bitmap *wnd, size_t bit, size_t bits) wbits = wnd->bits_last; tail = wbits - wbit; - op = tail < bits ? tail : bits; + op = min_t(u32, tail, bits); bh = wnd_map(wnd, iw); if (IS_ERR(bh)) { @@ -781,7 +782,7 @@ int wnd_set_used(struct wnd_bitmap *wnd, size_t bit, size_t bits) wbits = wnd->bits_last; tail = wbits - wbit; - op = tail < bits ? tail : bits; + op = min_t(u32, tail, bits); bh = wnd_map(wnd, iw); if (IS_ERR(bh)) { @@ -831,7 +832,7 @@ static bool wnd_is_free_hlp(struct wnd_bitmap *wnd, size_t bit, size_t bits) wbits = wnd->bits_last; tail = wbits - wbit; - op = tail < bits ? tail : bits; + op = min_t(u32, tail, bits); if (wbits != wnd->free_bits[iw]) { bool ret; @@ -923,7 +924,7 @@ use_wnd: wbits = wnd->bits_last; tail = wbits - wbit; - op = tail < bits ? tail : bits; + op = min_t(u32, tail, bits); if (wnd->free_bits[iw]) { bool ret; diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index c964d3996aab..77d2e56d5b4f 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -382,7 +382,7 @@ int ntfs_look_for_free_space(struct ntfs_sb_info *sbi, CLST lcn, CLST len, } lcn = wnd_zone_bit(wnd); - alen = zlen > len ? len : zlen; + alen = min_t(CLST, len, zlen); wnd_zone_set(wnd, lcn + alen, zlen - alen); @@ -1096,7 +1096,7 @@ int ntfs_sb_write_run(struct ntfs_sb_info *sbi, const struct runs_tree *run, len = ((u64)clen << cluster_bits) - off; for (;;) { - u32 op = len < bytes ? len : bytes; + u32 op = min_t(u64, len, bytes); int err = ntfs_sb_write(sb, lbo, op, buf, 0); if (err) @@ -1297,7 +1297,7 @@ int ntfs_get_bh(struct ntfs_sb_info *sbi, const struct runs_tree *run, u64 vbo, nb->off = off = lbo & (blocksize - 1); for (;;) { - u32 len32 = len < bytes ? len : bytes; + u32 len32 = min_t(u64, len, bytes); sector_t block = lbo >> sb->s_blocksize_bits; do { -- cgit v1.2.3 From 71eabafac1eb67d590d4500eaf38177537ea6d4a Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:51 +0300 Subject: drm/tegra: dc: Remove unused variables Remove unused variables from tegra_crtc_update_memory_bandwidth(). Fixes: 04d5d5df9df7 ("drm/tegra: dc: Support memory bandwidth management") Reported-by: kernel test robot Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 3 --- drivers/gpu/drm/tegra/dc.h | 6 ------ 2 files changed, 9 deletions(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 16c7aabb94d3..a29d64f87563 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -1845,7 +1845,6 @@ tegra_crtc_update_memory_bandwidth(struct drm_crtc *crtc, bool prepare_bandwidth_transition) { const struct tegra_plane_state *old_tegra_state, *new_tegra_state; - const struct tegra_dc_state *old_dc_state, *new_dc_state; u32 i, new_avg_bw, old_avg_bw, new_peak_bw, old_peak_bw; const struct drm_plane_state *old_plane_state; const struct drm_crtc_state *old_crtc_state; @@ -1858,8 +1857,6 @@ tegra_crtc_update_memory_bandwidth(struct drm_crtc *crtc, return; old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc); - old_dc_state = to_const_dc_state(old_crtc_state); - new_dc_state = to_const_dc_state(crtc->state); if (!crtc->state->active) { if (!old_crtc_state->active) diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h index f0cb691852a1..40378308d527 100644 --- a/drivers/gpu/drm/tegra/dc.h +++ b/drivers/gpu/drm/tegra/dc.h @@ -35,12 +35,6 @@ static inline struct tegra_dc_state *to_dc_state(struct drm_crtc_state *state) return NULL; } -static inline const struct tegra_dc_state * -to_const_dc_state(const struct drm_crtc_state *state) -{ - return to_dc_state((struct drm_crtc_state *)state); -} - struct tegra_dc_stats { unsigned long frames; unsigned long vblank; -- cgit v1.2.3 From 8a44924e1400d75db5c6fdaf199038580df4f79f Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:52 +0300 Subject: drm/tegra: uapi: Fix wrong mapping end address in case of disabled IOMMU All jobs are failing on Tegra20 because it doesn't use IOMMU and mapping function uses size of mapping that is zero instead of BO size, fix it. Fixes: d7c591bc1a3f ("drm/tegra: Implement new UAPI") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/uapi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/uapi.c b/drivers/gpu/drm/tegra/uapi.c index dc16a24f4dbe..690a339c52ec 100644 --- a/drivers/gpu/drm/tegra/uapi.c +++ b/drivers/gpu/drm/tegra/uapi.c @@ -222,7 +222,7 @@ int tegra_drm_ioctl_channel_map(struct drm_device *drm, void *data, struct drm_f mapping->iova = sg_dma_address(mapping->sgt->sgl); } - mapping->iova_end = mapping->iova + host1x_to_tegra_bo(mapping->bo)->size; + mapping->iova_end = mapping->iova + host1x_to_tegra_bo(mapping->bo)->gem.size; err = xa_alloc(&context->mappings, &args->mapping, mapping, XA_LIMIT(1, U32_MAX), GFP_KERNEL); -- cgit v1.2.3 From a81cf839a064af27349b857fe347e97dd98c12a0 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:53 +0300 Subject: gpu/host1x: fence: Make spinlock static The DEFINE_SPINLOCK macro creates a global spinlock symbol that is visible to the whole kernel. This is unintended in the code, fix it. Fixes: 687db2207b1b ("gpu: host1x: Add DMA fence implementation") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/host1x/fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/fence.c b/drivers/gpu/host1x/fence.c index 6941add95d0f..e49083b0b09e 100644 --- a/drivers/gpu/host1x/fence.c +++ b/drivers/gpu/host1x/fence.c @@ -15,7 +15,7 @@ #include "intr.h" #include "syncpt.h" -DEFINE_SPINLOCK(lock); +static DEFINE_SPINLOCK(lock); struct host1x_syncpt_fence { struct dma_fence base; -- cgit v1.2.3 From c3dbfb9c49eef7d07904e5fd5e158dd6688bbab3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 2 Sep 2021 22:33:09 +0200 Subject: gpu: host1x: Plug potential memory leak The memory allocated for a DMA fence could be leaked if the code failed to allocate the waiter object. Make sure to release the fence allocation on failure. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Thierry Reding --- drivers/gpu/host1x/fence.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/fence.c b/drivers/gpu/host1x/fence.c index e49083b0b09e..ecab72882192 100644 --- a/drivers/gpu/host1x/fence.c +++ b/drivers/gpu/host1x/fence.c @@ -152,8 +152,10 @@ struct dma_fence *host1x_fence_create(struct host1x_syncpt *sp, u32 threshold) return ERR_PTR(-ENOMEM); fence->waiter = kzalloc(sizeof(*fence->waiter), GFP_KERNEL); - if (!fence->waiter) + if (!fence->waiter) { + kfree(fence); return ERR_PTR(-ENOMEM); + } fence->sp = sp; fence->threshold = threshold; -- cgit v1.2.3 From 24d5f16e407b75bc59d5419b957a9cab423b2681 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Tue, 7 Sep 2021 14:32:14 +0300 Subject: iwlwifi: mvm: Fix possible NULL dereference In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it. Fixes: 7b3954a1d69a ("iwlwifi: mvm: Explicitly stop session protection before unbinding") Reported-by: Dan Carpenter Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210907143156.e80e52167d93.Ie2247f43f8acb2cee6dff5b07a3947c79a772835@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c index 25af88a3edce..e91f8e889df7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c @@ -662,12 +662,13 @@ static bool __iwl_mvm_remove_time_event(struct iwl_mvm *mvm, u32 *uid) { u32 id; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); + struct iwl_mvm_vif *mvmvif; enum nl80211_iftype iftype; if (!te_data->vif) return false; + mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); iftype = te_data->vif->type; /* -- cgit v1.2.3 From 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:06 -0600 Subject: selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_warnings_count() to check fscanf() return value to get rid of the following warning: x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/x86_64/mmio_warning_test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c index e6480fd5c4bd..8039e1eff938 100644 --- a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c +++ b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c @@ -82,7 +82,8 @@ int get_warnings_count(void) FILE *f; f = popen("dmesg | grep \"WARNING:\" | wc -l", "r"); - fscanf(f, "%d", &warnings); + if (fscanf(f, "%d", &warnings) < 1) + warnings = 0; fclose(f); return warnings; -- cgit v1.2.3 From 3a4f0cc693cd3d80e66a255f0bff0e2c0461eef1 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:07 -0600 Subject: selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning: lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/lib/test_util.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index af1031fed97f..938cd423643e 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -129,13 +129,16 @@ size_t get_trans_hugepagesz(void) { size_t size; FILE *f; + int ret; TEST_ASSERT(thp_configured(), "THP is not configured in host kernel"); f = fopen("/sys/kernel/mm/transparent_hugepage/hpage_pmd_size", "r"); TEST_ASSERT(f != NULL, "Error in opening transparent_hugepage/hpage_pmd_size"); - fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + TEST_ASSERT(ret < 1, "Error reading transparent_hugepage/hpage_pmd_size"); fclose(f); return size; -- cgit v1.2.3 From 20175d5eac5bb94a7a3719ef275337fc9abf26ac Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:08 -0600 Subject: selftests: kvm: move get_run_delay() into lib/test_util get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication. Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/include/test_util.h | 1 + tools/testing/selftests/kvm/lib/test_util.c | 15 +++++++++++++++ tools/testing/selftests/kvm/steal_time.c | 15 --------------- tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c | 15 --------------- 4 files changed, 16 insertions(+), 30 deletions(-) diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index d79be15dd3d2..c7409b9b4e5b 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -102,6 +102,7 @@ const struct vm_mem_backing_src_alias *vm_mem_backing_src_alias(uint32_t i); size_t get_backing_src_pagesz(uint32_t i); void backing_src_help(void); enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name); +long get_run_delay(void); /* * Whether or not the given source type is shared memory (as opposed to diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index 938cd423643e..f80dd38a38b2 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include "linux/kernel.h" @@ -303,3 +304,17 @@ enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name) TEST_FAIL("Unknown backing src type: %s", type_name); return -1; } + +long get_run_delay(void) +{ + char path[64]; + long val[2]; + FILE *fp; + + sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); + fp = fopen(path, "r"); + fscanf(fp, "%ld %ld ", &val[0], &val[1]); + fclose(fp); + + return val[1]; +} diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index ecec30865a74..51fe95a5c36a 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -217,20 +216,6 @@ static void steal_time_dump(struct kvm_vm *vm, uint32_t vcpuid) #endif -static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static void *do_steal_time(void *arg) { struct timespec ts, stop; diff --git a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c index 117bf49a3d79..eda0d2a51224 100644 --- a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c +++ b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c @@ -14,7 +14,6 @@ #include #include #include -#include #define VCPU_ID 5 @@ -98,20 +97,6 @@ static void guest_code(void) GUEST_DONE(); } -static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static int cmp_timespec(struct timespec *a, struct timespec *b) { if (a->tv_sec > b->tv_sec) -- cgit v1.2.3 From f5013d412a43662b63f3d5f3a804d63213acd471 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:09 -0600 Subject: selftests: kvm: fix get_run_delay() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it. lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/include/test_util.h | 2 ++ tools/testing/selftests/kvm/lib/test_util.c | 4 +++- tools/testing/selftests/kvm/steal_time.c | 1 - 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index c7409b9b4e5b..451fed5ce8e7 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -95,6 +95,8 @@ struct vm_mem_backing_src_alias { uint32_t flag; }; +#define MIN_RUN_DELAY_NS 200000UL + bool thp_configured(void); size_t get_trans_hugepagesz(void); size_t get_def_hugetlb_pagesz(void); diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index f80dd38a38b2..a9107bfae402 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -313,7 +313,9 @@ long get_run_delay(void) sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); + /* Return MIN_RUN_DELAY_NS upon failure just to be safe */ + if (fscanf(fp, "%ld %ld ", &val[0], &val[1]) < 2) + val[1] = MIN_RUN_DELAY_NS; fclose(fp); return val[1]; diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index 51fe95a5c36a..2172d65b85e4 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -19,7 +19,6 @@ #define NR_VCPUS 4 #define ST_GPA_BASE (1 << 30) -#define MIN_RUN_DELAY_NS 200000UL static void *st_gva[NR_VCPUS]; static uint64_t guest_stolen_time[NR_VCPUS]; -- cgit v1.2.3 From e6fab7af6ba1bc77c78713a83876f60ca7a4a064 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Thu, 16 Sep 2021 21:31:51 +0300 Subject: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck --- drivers/hwmon/mlxreg-fan.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index 116681fde33d..89fe7b9fe26b 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -315,8 +315,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, { struct mlxreg_fan *fan = cdev->devdata; unsigned long cur_state; + int i, config = 0; u32 regval; - int i; int err; /* @@ -329,6 +329,12 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, * overwritten. */ if (state >= MLXREG_FAN_SPEED_MIN && state <= MLXREG_FAN_SPEED_MAX) { + /* + * This is configuration change, which is only supported through sysfs. + * For configuration non-zero value is to be returned to avoid thermal + * statistics update. + */ + config = 1; state -= MLXREG_FAN_MAX_STATE; for (i = 0; i < state; i++) fan->cooling_levels[i] = state; @@ -343,7 +349,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, cur_state = MLXREG_FAN_PWM_DUTY2STATE(regval); if (state < cur_state) - return 0; + return config; state = cur_state; } @@ -359,7 +365,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, dev_err(fan->dev, "Failed to write PWM duty\n"); return err; } - return 0; + return config; } static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = { -- cgit v1.2.3 From 129803e642ac3d828b3c73ff10f570c42d962ef8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 25 Aug 2021 09:41:22 +0200 Subject: pinctrl: core: Remove duplicated word from devm_pinctrl_unregister() Remove duplicated "which" from devm_pinctrl_unregister() kernel doc description. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/8b75e5dfd9363f35ebdd7812e119757379678f97.1629877281.git.michal.simek@xilinx.com Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index a4ac87c8b4f8..5082102d7d0d 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -2306,7 +2306,7 @@ EXPORT_SYMBOL_GPL(devm_pinctrl_register_and_init); /** * devm_pinctrl_unregister() - Resource managed version of pinctrl_unregister(). - * @dev: device for which which resource was allocated + * @dev: device for which resource was allocated * @pctldev: the pinctrl device to unregister. */ void devm_pinctrl_unregister(struct device *dev, struct pinctrl_dev *pctldev) -- cgit v1.2.3 From e9a9970bf520c99e530d8f1fa5b5c22671fad4ef Mon Sep 17 00:00:00 2001 From: Russ Weight Date: Thu, 16 Sep 2021 14:07:33 -0700 Subject: fpga: dfl: Avoid reads to AFU CSRs during enumeration CSR address space for Accelerator Functional Units (AFU) is not available during the early Device Feature List (DFL) enumeration. Early access to this space results in invalid data and port errors. This change adds a condition to prevent an early read from the AFU CSR space. Fixes: 1604986c3e6b ("fpga: dfl: expose feature revision from struct dfl_device") Cc: stable@vger.kernel.org Signed-off-by: Russ Weight Signed-off-by: Moritz Fischer --- drivers/fpga/dfl.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c index c99b78ee008a..f86666cf2c6a 100644 --- a/drivers/fpga/dfl.c +++ b/drivers/fpga/dfl.c @@ -1019,16 +1019,18 @@ create_feature_instance(struct build_feature_devs_info *binfo, { unsigned int irq_base, nr_irqs; struct dfl_feature_info *finfo; + u8 revision = 0; int ret; - u8 revision; u64 v; - v = readq(binfo->ioaddr + ofst); - revision = FIELD_GET(DFH_REVISION, v); + if (fid != FEATURE_ID_AFU) { + v = readq(binfo->ioaddr + ofst); + revision = FIELD_GET(DFH_REVISION, v); - /* read feature size and id if inputs are invalid */ - size = size ? size : feature_size(v); - fid = fid ? fid : feature_id(v); + /* read feature size and id if inputs are invalid */ + size = size ? size : feature_size(v); + fid = fid ? fid : feature_id(v); + } if (binfo->len - ofst < size) return -EINVAL; -- cgit v1.2.3 From 7e6f8d6f4a42ef9b693ff1b49267c546931d4619 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 31 Aug 2021 17:36:12 +0530 Subject: pinctrl: amd: Add irq field data pinctrl_amd use gpiochip_get_data() to get their local state containers back from the gpiochip passed as amd_gpio chip data. Hence added irq field data to get directly using amd_gpio chip data. Signed-off-by: Basavaraj Natikar Tested-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210831120613.1514899-2-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 9 ++++----- drivers/pinctrl/pinctrl-amd.h | 1 + 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index c001f2ed20f8..8292bd5c13f3 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -902,7 +902,6 @@ static struct pinctrl_desc amd_pinctrl_desc = { static int amd_gpio_probe(struct platform_device *pdev) { int ret = 0; - int irq_base; struct resource *res; struct amd_gpio *gpio_dev; struct gpio_irq_chip *girq; @@ -925,9 +924,9 @@ static int amd_gpio_probe(struct platform_device *pdev) if (!gpio_dev->base) return -ENOMEM; - irq_base = platform_get_irq(pdev, 0); - if (irq_base < 0) - return irq_base; + gpio_dev->irq = platform_get_irq(pdev, 0); + if (gpio_dev->irq < 0) + return gpio_dev->irq; #ifdef CONFIG_PM_SLEEP gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins, @@ -987,7 +986,7 @@ static int amd_gpio_probe(struct platform_device *pdev) goto out2; } - ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, + ret = devm_request_irq(&pdev->dev, gpio_dev->irq, amd_gpio_irq_handler, IRQF_SHARED, KBUILD_MODNAME, gpio_dev); if (ret) goto out2; diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h index 95e763424042..1d4317073654 100644 --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -98,6 +98,7 @@ struct amd_gpio { struct resource *res; struct platform_device *pdev; u32 *saved_regs; + int irq; }; /* KERNCZ configuration*/ -- cgit v1.2.3 From acd47b9f28e55b505aedb842131b40904e151d7c Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 31 Aug 2021 17:36:13 +0530 Subject: pinctrl: amd: Handle wake-up interrupt Enable/disable power management wakeup mode, which is disabled by default. enable_irq_wake enables wakes the system from sleep. Hence added enable/disable irq_wake to handle wake-up interrupt. Signed-off-by: Basavaraj Natikar Tested-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210831120613.1514899-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 8292bd5c13f3..8d0f88e9ca88 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -445,6 +445,7 @@ static int amd_gpio_irq_set_wake(struct irq_data *d, unsigned int on) struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct amd_gpio *gpio_dev = gpiochip_get_data(gc); u32 wake_mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3); + int err; raw_spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); @@ -457,6 +458,15 @@ static int amd_gpio_irq_set_wake(struct irq_data *d, unsigned int on) writel(pin_reg, gpio_dev->base + (d->hwirq)*4); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); + if (on) + err = enable_irq_wake(gpio_dev->irq); + else + err = disable_irq_wake(gpio_dev->irq); + + if (err) + dev_err(&gpio_dev->pdev->dev, "failed to %s wake-up interrupt\n", + on ? "enable" : "disable"); + return 0; } -- cgit v1.2.3 From d36a97736b2cc9b13db0dfdf6f32b115ec193614 Mon Sep 17 00:00:00 2001 From: David Collins Date: Thu, 16 Sep 2021 18:51:37 +0530 Subject: pinctrl: qcom: spmi-gpio: correct parent irqspec translation pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins Signed-off-by: satya priya Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 98bf0e2a2a8d..b2562e893139 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved. */ #include @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -171,6 +172,8 @@ struct pmic_gpio_state { struct pinctrl_dev *ctrl; struct gpio_chip chip; struct irq_chip irq; + u8 usid; + u8 pid_base; }; static const struct pinconf_generic_params pmic_gpio_bindings[] = { @@ -949,12 +952,36 @@ static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip, unsigned int *parent_hwirq, unsigned int *parent_type) { - *parent_hwirq = child_hwirq + 0xc0; + struct pmic_gpio_state *state = gpiochip_get_data(chip); + + *parent_hwirq = child_hwirq + state->pid_base; *parent_type = child_type; return 0; } +static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip, + unsigned int parent_hwirq, + unsigned int parent_type) +{ + struct pmic_gpio_state *state = gpiochip_get_data(chip); + struct irq_fwspec *fwspec; + + fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL); + if (!fwspec) + return NULL; + + fwspec->fwnode = chip->irq.parent_domain->fwnode; + + fwspec->param_count = 4; + fwspec->param[0] = state->usid; + fwspec->param[1] = parent_hwirq; + /* param[2] must be left as 0 */ + fwspec->param[3] = parent_type; + + return fwspec; +} + static int pmic_gpio_probe(struct platform_device *pdev) { struct irq_domain *parent_domain; @@ -965,6 +992,7 @@ static int pmic_gpio_probe(struct platform_device *pdev) struct pmic_gpio_pad *pad, *pads; struct pmic_gpio_state *state; struct gpio_irq_chip *girq; + const struct spmi_device *parent_spmi_dev; int ret, npins, i; u32 reg; @@ -984,6 +1012,9 @@ static int pmic_gpio_probe(struct platform_device *pdev) state->dev = &pdev->dev; state->map = dev_get_regmap(dev->parent, NULL); + parent_spmi_dev = to_spmi_device(dev->parent); + state->usid = parent_spmi_dev->usid; + state->pid_base = reg >> 8; pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL); if (!pindesc) @@ -1059,7 +1090,7 @@ static int pmic_gpio_probe(struct platform_device *pdev) girq->fwnode = of_node_to_fwnode(state->dev->of_node); girq->parent_domain = parent_domain; girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq; - girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell; + girq->populate_parent_alloc_arg = pmic_gpio_populate_parent_fwspec; girq->child_offset_to_irq = pmic_gpio_child_offset_to_irq; girq->child_irq_domain_ops.translate = pmic_gpio_domain_translate; -- cgit v1.2.3 From 078fb7aa6a8305bce09cdfbe77b4c987934442ba Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 19 Aug 2021 13:42:39 -0500 Subject: arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes The 'motherboard-bus' node in Arm Ltd boards fails schema checks as 'simple-bus' child nodes must have a unit-address. The 'ranges' handling is also wrong (or at least strange) as the mapping of SMC chip selects should be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus' node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges' should be moved down a level. The latter change is more simple, so let's do that. As the 'ranges' value doesn't vary for a given motherboard instance, we can move 'ranges' into the motherboard dtsi files. Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org Cc: Andre Przywara Cc: Sudeep Holla Cc: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Rob Herring Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 13 +++++++++++-- arch/arm/boot/dts/vexpress-v2m.dtsi | 14 ++++++++++++-- arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 11 +---------- arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 11 +---------- arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 11 +---------- arch/arm/boot/dts/vexpress-v2p-ca9.dts | 10 ---------- arch/arm64/boot/dts/arm/fvp-base-revc.dts | 11 ----------- arch/arm64/boot/dts/arm/juno-base.dtsi | 10 ---------- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 14 ++++++++++++-- arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 11 ----------- arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 14 ++++++++++++-- arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 12 +----------- 13 files changed, 52 insertions(+), 92 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index f58e8e17120d..75927a052f8f 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -101,13 +101,22 @@ }; bus@8000000 { - motherboard-bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + motherboard-bus@8000000 { arm,hbi = <0x190>; arm,vexpress,site = <0>; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; nor_flash: flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 0819d112de12..0547f633764f 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -20,13 +20,23 @@ / { bus@40000000 { - motherboard { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x10000000>, + <0x10000000 0x10000000 0x00020000>; + + motherboard-bus@40000000 { arm,hbi = <0x190>; arm,vexpress,site = <0>; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges; + ranges = <0 0 0x40000000 0x04000000>, + <1 0 0x44000000 0x04000000>, + <2 0 0x48000000 0x04000000>, + <3 0 0x4c000000 0x04000000>, + <7 0 0x10000000 0x00020000>; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index e63c5c0bfb43..7fb387a7f81b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -237,16 +237,7 @@ }; bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; + ranges = <0x8000000 0 0x8000000 0x18000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 012d40a7228c..f81d14753273 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -609,16 +609,7 @@ }; smb: bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; + ranges = <0x8000000 0 0x8000000 0x18000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 7aa64ae25779..42dbf606b1e2 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -207,16 +207,7 @@ }; smb: bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; + ranges = <0 0x8000000 0x18000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 1317f0f58d53..99b2f339cc04 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -296,16 +296,6 @@ }; smb: bus@40000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x40000000 0x04000000>, - <1 0 0x44000000 0x04000000>, - <2 0 0x48000000 0x04000000>, - <3 0 0x4c000000 0x04000000>, - <7 0 0x10000000 0x00020000>; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 2732d8e5bb5d..269b649934b5 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -195,17 +195,6 @@ }; bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index e4fea639731e..6288e104a089 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -802,16 +802,6 @@ }; bus@8000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 15>; interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 4e124d955c8e..fefd2b5f0176 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -92,11 +92,21 @@ }; bus@8000000 { - motherboard-bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x8000000 0 0x8000000 0x18000000>; + + motherboard-bus@8000000 { compatible = "arm,vexpress,v2p-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; arm,hbi = <0x252>; arm,vexpress,site = <0>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index 3050f45bade4..258991ad7cc0 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -133,17 +133,6 @@ }; bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi index b917d9d3f1c4..33182d9e5826 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi @@ -6,7 +6,7 @@ */ / { bus@8000000 { - motherboard-bus { + motherboard-bus@8000000 { arm,v2m-memory-map = "rs2"; iofpga-bus@300000000 { diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index d4c552830743..5f6cab668aa0 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -77,11 +77,21 @@ }; bus@8000000 { - motherboard-bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x8000000 0 0x8000000 0x18000000>; + + motherboard-bus@8000000 { compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index d859914500a7..5f6a5951adef 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -145,17 +145,7 @@ }; smb: bus@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - + ranges = <0x8000000 0 0x8000000 0x18000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, -- cgit v1.2.3 From e8f69b16ee776da88589b5271e3f46020efc8f6c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 12:12:04 +0200 Subject: net: hso: fix muxed tty registration If resource allocation and registration fail for a muxed tty device (e.g. if there are no more minor numbers) the driver should not try to deregister the never-registered (or already-deregistered) tty. Fix up the error handling to avoid dereferencing a NULL pointer when attempting to remove the character device. Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index a57251ba5991..f97813a4e8d1 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2719,14 +2719,14 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) - goto exit; + goto err_free_dev; hso_dev->port_data.dev_serial = serial; serial->parent = hso_dev; if (hso_serial_common_create (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) - goto exit; + goto err_free_serial; serial->tx_data_length--; serial->write_data = hso_mux_serial_write_data; @@ -2742,11 +2742,9 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, /* done, return it */ return hso_dev; -exit: - if (serial) { - tty_unregister_device(tty_drv, serial->minor); - kfree(serial); - } +err_free_serial: + kfree(serial); +err_free_dev: kfree(hso_dev); return NULL; -- cgit v1.2.3 From 23ca067b3295d935835b71f743235f9e5ab31cc5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 1 Sep 2021 10:44:03 +0200 Subject: mm: Fully initialize invalidate_lock, amend lock class later The function __init_rwsem() is not part of the official API, it just a helper function used by init_rwsem(). Changing the lock's class and name should be done by using lockdep_set_class_and_name() after the has been fully initialized. The overhead of the additional class struct and setting it twice is negligible and it works across all locks. Fully initialize the lock with init_rwsem() and then set the custom class and name for the lock. Fixes: 730633f0b7f95 ("mm: Protect operations adding pages to page cache with invalidate_lock") Link: https://lore.kernel.org/r/20210901084403.g4fezi23cixemlhh@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Jan Kara --- fs/inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 37710ca863b5..ed0cab8a32db 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -190,8 +190,10 @@ int inode_init_always(struct super_block *sb, struct inode *inode) mapping_set_gfp_mask(mapping, GFP_HIGHUSER_MOVABLE); mapping->private_data = NULL; mapping->writeback_index = 0; - __init_rwsem(&mapping->invalidate_lock, "mapping.invalidate_lock", - &sb->s_type->invalidate_lock_key); + init_rwsem(&mapping->invalidate_lock); + lockdep_set_class_and_name(&mapping->invalidate_lock, + &sb->s_type->invalidate_lock_key, + "mapping.invalidate_lock"); inode->i_private = NULL; inode->i_mapping = mapping; INIT_HLIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */ -- cgit v1.2.3 From 3abe2eec87059260bf31033a8863c67c5d45b9d0 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Fri, 17 Sep 2021 16:28:05 +0800 Subject: ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX S24_LE params fixup is only required for DPTX. Remove fixup ops assignment for HDMITX. Fixes: 40d605df0a7b ("ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682") Signed-off-by: Trevor Wu Link: https://lore.kernel.org/r/20210917082805.30898-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c index c97ace7387b4..de09f67c0450 100644 --- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c +++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c @@ -424,8 +424,8 @@ static int mt8195_hdmi_codec_init(struct snd_soc_pcm_runtime *rtd) return snd_soc_component_set_jack(cmpnt_codec, &priv->hdmi_jack, NULL); } -static int mt8195_hdmitx_dptx_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, - struct snd_pcm_hw_params *params) +static int mt8195_dptx_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) { /* fix BE i2s format to 32bit, clean param mask first */ @@ -902,7 +902,7 @@ static struct snd_soc_dai_link mt8195_mt6359_rt1019_rt5682_dai_links[] = { .no_pcm = 1, .dpcm_playback = 1, .ops = &mt8195_dptx_ops, - .be_hw_params_fixup = mt8195_hdmitx_dptx_hw_params_fixup, + .be_hw_params_fixup = mt8195_dptx_hw_params_fixup, SND_SOC_DAILINK_REG(DPTX_BE), }, [DAI_LINK_ETDM1_IN_BE] = { @@ -953,7 +953,6 @@ static struct snd_soc_dai_link mt8195_mt6359_rt1019_rt5682_dai_links[] = { SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .dpcm_playback = 1, - .be_hw_params_fixup = mt8195_hdmitx_dptx_hw_params_fixup, SND_SOC_DAILINK_REG(ETDM3_OUT_BE), }, [DAI_LINK_PCM1_BE] = { -- cgit v1.2.3 From cfacfefd382af3b42905108b54f02820dca225c4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 17 Sep 2021 11:51:08 +0300 Subject: ASoC: SOF: trace: Omit error print when waking up trace sleepers Do not print error message from snd_sof_trace_notify_for_error() when possible sleeping trace work is woken up to flush the remaining debug information. This action by itself is not an error, it is just an action we take when an error occurs to make sure that all information have been fed to the userspace (if we have trace in use). Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210917085108.25532-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/trace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/sof/trace.c b/sound/soc/sof/trace.c index f72a6e83e6af..58f6ca5cf491 100644 --- a/sound/soc/sof/trace.c +++ b/sound/soc/sof/trace.c @@ -530,7 +530,6 @@ void snd_sof_trace_notify_for_error(struct snd_sof_dev *sdev) return; if (sdev->dtrace_is_enabled) { - dev_err(sdev->dev, "error: waking up any trace sleepers\n"); sdev->dtrace_error = true; wake_up(&sdev->trace_sleep); } -- cgit v1.2.3 From dc9660590d106bb58d145233fffca4efadad3655 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 16 Sep 2021 16:41:02 +0200 Subject: regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings" This reverts commit 0da6736ecd10b45e535b100acd58df2db4c099d8. The MODULE_DEVICE_TABLE already creates proper alias. Having another MODULE_ALIAS causes the alias to be duplicated: $ modinfo max14577-regulator.ko alias: platform:max77836-regulator alias: platform:max14577-regulator description: Maxim 14577/77836 regulator driver alias: platform:max77836-regulator alias: platform:max14577-regulator Cc: Marek Szyprowski Fixes: 0da6736ecd10 ("regulator: max14577: Add proper module aliases strings") Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20210916144102.120980-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown --- drivers/regulator/max14577-regulator.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c index 1d78b455cc48..e34face736f4 100644 --- a/drivers/regulator/max14577-regulator.c +++ b/drivers/regulator/max14577-regulator.c @@ -269,5 +269,3 @@ module_exit(max14577_regulator_exit); MODULE_AUTHOR("Krzysztof Kozlowski "); MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:max14577-regulator"); -MODULE_ALIAS("platform:max77836-regulator"); -- cgit v1.2.3 From 3c9cfb5269f76d447dbadb67835368f3111a91d7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 14:17:35 +0300 Subject: net: update NXP copyright text NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 2 +- drivers/net/dsa/ocelot/felix.h | 2 +- drivers/net/dsa/ocelot/felix_vsc9959.c | 2 +- drivers/net/dsa/sja1105/sja1105_clocking.c | 2 +- drivers/net/dsa/sja1105/sja1105_devlink.c | 2 +- drivers/net/dsa/sja1105/sja1105_flower.c | 2 +- drivers/net/dsa/sja1105/sja1105_mdio.c | 2 +- drivers/net/dsa/sja1105/sja1105_spi.c | 2 +- drivers/net/dsa/sja1105/sja1105_static_config.c | 2 +- drivers/net/dsa/sja1105/sja1105_static_config.h | 2 +- drivers/net/dsa/sja1105/sja1105_vl.c | 2 +- drivers/net/dsa/sja1105/sja1105_vl.h | 2 +- drivers/net/ethernet/freescale/enetc/enetc_ierb.c | 2 +- drivers/net/ethernet/freescale/enetc/enetc_ierb.h | 2 +- drivers/net/ethernet/mscc/ocelot_devlink.c | 2 +- drivers/net/ethernet/mscc/ocelot_mrp.c | 2 +- drivers/net/ethernet/mscc/ocelot_net.c | 2 +- drivers/net/pcs/pcs-xpcs-nxp.c | 2 +- include/linux/dsa/ocelot.h | 2 +- include/linux/packing.h | 2 +- lib/packing.c | 2 +- net/dsa/tag_ocelot.c | 2 +- net/dsa/tag_ocelot_8021q.c | 2 +- tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh | 2 +- 24 files changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 3656e67af789..a3a9636430d6 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2019-2021 NXP Semiconductors +/* Copyright 2019-2021 NXP * * This is an umbrella module for all network switches that are * register-compatible with Ocelot and that perform I/O to their host CPU diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h index 5854bab43327..54024b6f9498 100644 --- a/drivers/net/dsa/ocelot/felix.h +++ b/drivers/net/dsa/ocelot/felix.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright 2019 NXP Semiconductors +/* Copyright 2019 NXP */ #ifndef _MSCC_FELIX_H #define _MSCC_FELIX_H diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index f966a253d1c7..9e2ac8e46619 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) /* Copyright 2017 Microsemi Corporation - * Copyright 2018-2019 NXP Semiconductors + * Copyright 2018-2019 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index 387a1f2f161c..5bbf1707f2af 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c index 05c7f4ca3b1a..0569ff066634 100644 --- a/drivers/net/dsa/sja1105/sja1105_devlink.c +++ b/drivers/net/dsa/sja1105/sja1105_devlink.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018-2019, Vladimir Oltean - * Copyright 2020 NXP Semiconductors + * Copyright 2020 NXP */ #include "sja1105.h" diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c index 6c10ffa968ce..72b9b39b0989 100644 --- a/drivers/net/dsa/sja1105/sja1105_flower.c +++ b/drivers/net/dsa/sja1105/sja1105_flower.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include "sja1105.h" #include "sja1105_vl.h" diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c index 705d3900e43a..215dd17ca790 100644 --- a/drivers/net/dsa/sja1105/sja1105_mdio.c +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2021, NXP Semiconductors +/* Copyright 2021 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index d60a530d0272..d3c9ad6d39d4 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH * Copyright (c) 2018-2019, Vladimir Oltean */ diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index 7a422ef4deb6..baba204ad62f 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include "sja1105_static_config.h" diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index bce0f5c03d0b..6a372d5f22ae 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause */ -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _SJA1105_STATIC_CONFIG_H diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index ec7b65daec20..6802f4057cc0 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_vl.h b/drivers/net/dsa/sja1105/sja1105_vl.h index 173d78963fed..51fba0dce91a 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.h +++ b/drivers/net/dsa/sja1105/sja1105_vl.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #ifndef _SJA1105_VL_H #define _SJA1105_VL_H diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ierb.c b/drivers/net/ethernet/freescale/enetc/enetc_ierb.c index ee1468e3eaa3..91f02c505028 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ierb.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_ierb.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* Copyright 2021 NXP Semiconductors +/* Copyright 2021 NXP * * The Integrated Endpoint Register Block (IERB) is configured by pre-boot * software and is supposed to be to ENETC what a NVRAM is to a 'real' PCIe diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ierb.h b/drivers/net/ethernet/freescale/enetc/enetc_ierb.h index b3b774e0998a..c2ce47c4be9f 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ierb.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_ierb.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ -/* Copyright 2021 NXP Semiconductors */ +/* Copyright 2021 NXP */ #include #include diff --git a/drivers/net/ethernet/mscc/ocelot_devlink.c b/drivers/net/ethernet/mscc/ocelot_devlink.c index edafbd37d12c..b8737efd2a85 100644 --- a/drivers/net/ethernet/mscc/ocelot_devlink.c +++ b/drivers/net/ethernet/mscc/ocelot_devlink.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright 2020-2021 NXP Semiconductors +/* Copyright 2020-2021 NXP */ #include #include "ocelot.h" diff --git a/drivers/net/ethernet/mscc/ocelot_mrp.c b/drivers/net/ethernet/mscc/ocelot_mrp.c index 08b481a93460..4b0941f09f71 100644 --- a/drivers/net/ethernet/mscc/ocelot_mrp.c +++ b/drivers/net/ethernet/mscc/ocelot_mrp.c @@ -2,7 +2,7 @@ /* Microsemi Ocelot Switch driver * * Copyright (c) 2017, 2019 Microsemi Corporation - * Copyright 2020-2021 NXP Semiconductors + * Copyright 2020-2021 NXP */ #include diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c index c0c465a4a981..e54b9fb2a97a 100644 --- a/drivers/net/ethernet/mscc/ocelot_net.c +++ b/drivers/net/ethernet/mscc/ocelot_net.c @@ -5,7 +5,7 @@ * mscc_ocelot_switch_lib. * * Copyright (c) 2017, 2019 Microsemi Corporation - * Copyright 2020-2021 NXP Semiconductors + * Copyright 2020-2021 NXP */ #include diff --git a/drivers/net/pcs/pcs-xpcs-nxp.c b/drivers/net/pcs/pcs-xpcs-nxp.c index 984c9f7f16a8..d16fc58cd48d 100644 --- a/drivers/net/pcs/pcs-xpcs-nxp.c +++ b/drivers/net/pcs/pcs-xpcs-nxp.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2021 NXP Semiconductors +/* Copyright 2021 NXP */ #include #include "pcs-xpcs.h" diff --git a/include/linux/dsa/ocelot.h b/include/linux/dsa/ocelot.h index c6bc45ae5e03..435777a0073c 100644 --- a/include/linux/dsa/ocelot.h +++ b/include/linux/dsa/ocelot.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ #ifndef _NET_DSA_TAG_OCELOT_H diff --git a/include/linux/packing.h b/include/linux/packing.h index 54667735cc67..8d6571feb95d 100644 --- a/include/linux/packing.h +++ b/include/linux/packing.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause - * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _LINUX_PACKING_H diff --git a/lib/packing.c b/lib/packing.c index 6ed72dccfdb5..9a72f4bbf0e2 100644 --- a/lib/packing.c +++ b/lib/packing.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c index d37ab98e7fe1..8025ed778d33 100644 --- a/net/dsa/tag_ocelot.c +++ b/net/dsa/tag_ocelot.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2019 NXP Semiconductors +/* Copyright 2019 NXP */ #include #include diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index 3038a257ba05..59072930cb02 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020-2021 NXP Semiconductors +/* Copyright 2020-2021 NXP * * An implementation of the software-defined tag_8021q.c tagger format, which * also preserves full functionality under a vlan_filtering bridge. It does diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh index beee0d5646a6..f7d84549cc3e 100755 --- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Copyright 2020 NXP Semiconductors +# Copyright 2020 NXP WAIT_TIME=1 NUM_NETIFS=4 -- cgit v1.2.3 From 02319bf15acf54004216e40ac9c171437f24be24 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 16 Sep 2021 14:33:35 -0700 Subject: net: dsa: bcm_sf2: Fix array overrun in bcm_sf2_num_active_ports() After d12e1c464988 ("net: dsa: b53: Set correct number of ports in the DSA struct") we stopped setting dsa_switch::num_ports to DSA_MAX_PORTS, which created an off by one error between the statically allocated bcm_sf2_priv::port_sts array (of size DSA_MAX_PORTS). When dsa_is_cpu_port() is used, we end-up accessing an out of bounds member and causing a NPD. Fix this by iterating with the appropriate port count using ds->num_ports. Fixes: d12e1c464988 ("net: dsa: b53: Set correct number of ports in the DSA struct") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 6ce9ec1283e0..b6c4b3adb171 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -68,7 +68,7 @@ static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds) struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); unsigned int port, count = 0; - for (port = 0; port < ARRAY_SIZE(priv->port_sts); port++) { + for (port = 0; port < ds->num_ports; port++) { if (dsa_is_cpu_port(ds, port)) continue; if (priv->port_sts[port].enabled) -- cgit v1.2.3 From a9b3043de47b7f8cbe38c36aee572526665b6315 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Sun, 12 Sep 2021 11:56:26 +0900 Subject: ksmbd: transport_rdma: Don't include rwlock.h directly rwlock.h specifically asks to not be included directly. In fact, the proper spinlock.h include isn't needed either, it comes with the huge pile that kthread.h ends up pulling in, so just drop it entirely. Signed-off-by: Mike Galbraith Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/transport_rdma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ksmbd/transport_rdma.c b/fs/ksmbd/transport_rdma.c index 52b2556e76b1..3a7fa23ba850 100644 --- a/fs/ksmbd/transport_rdma.c +++ b/fs/ksmbd/transport_rdma.c @@ -20,7 +20,6 @@ #define SUBMOD_NAME "smb_direct" #include -#include #include #include #include -- cgit v1.2.3 From 89c485c7a3ecbc2ebd568f9c9c2edf3a8cf7485b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 16 Sep 2021 17:24:54 -0400 Subject: NLM: Fix svcxdr_encode_owner() Dai Ngo reports that, since the XDR overhaul, the NLM server crashes when the TEST procedure wants to return NLM_DENIED. There is a bug in svcxdr_encode_owner() that none of our standard test cases found. Replace the open-coded function with a call to an appropriate pre-fabricated XDR helper. Reported-by: Dai Ngo Fixes: a6a63ca5652e ("lockd: Common NLM XDR helpers") Signed-off-by: Chuck Lever --- fs/lockd/svcxdr.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/fs/lockd/svcxdr.h b/fs/lockd/svcxdr.h index c69a0bb76c94..4f1a451da5ba 100644 --- a/fs/lockd/svcxdr.h +++ b/fs/lockd/svcxdr.h @@ -134,18 +134,9 @@ svcxdr_decode_owner(struct xdr_stream *xdr, struct xdr_netobj *obj) static inline bool svcxdr_encode_owner(struct xdr_stream *xdr, const struct xdr_netobj *obj) { - unsigned int quadlen = XDR_QUADLEN(obj->len); - __be32 *p; - - if (xdr_stream_encode_u32(xdr, obj->len) < 0) - return false; - p = xdr_reserve_space(xdr, obj->len); - if (!p) + if (obj->len > XDR_MAX_NETOBJ) return false; - p[quadlen - 1] = 0; /* XDR pad */ - memcpy(p, obj->data, obj->len); - - return true; + return xdr_stream_encode_opaque(xdr, obj->data, obj->len) > 0; } #endif /* _LOCKD_SVCXDR_H_ */ -- cgit v1.2.3 From 02579b2ff8b0becfb51d85a975908ac4ab15fba8 Mon Sep 17 00:00:00 2001 From: Dai Ngo Date: Thu, 16 Sep 2021 14:22:12 -0400 Subject: nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client recovers by sending BIND_CONN_TO_SESSION but the server fails to recover the back channel and leaves it as NFSD4_CB_DOWN. Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel by calling nfsd4_probe_callback. Signed-off-by: Dai Ngo Signed-off-by: Chuck Lever --- fs/nfsd/nfs4state.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 4b6d60b46b0a..ba8bab17175e 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3570,7 +3570,7 @@ static struct nfsd4_conn *__nfsd4_find_conn(struct svc_xprt *xpt, struct nfsd4_s } static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, - struct nfsd4_session *session, u32 req) + struct nfsd4_session *session, u32 req, struct nfsd4_conn **conn) { struct nfs4_client *clp = session->se_client; struct svc_xprt *xpt = rqst->rq_xprt; @@ -3593,6 +3593,8 @@ static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, else status = nfserr_inval; spin_unlock(&clp->cl_lock); + if (status == nfs_ok && conn) + *conn = c; return status; } @@ -3617,8 +3619,16 @@ __be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp, status = nfserr_wrong_cred; if (!nfsd4_mach_creds_match(session->se_client, rqstp)) goto out; - status = nfsd4_match_existing_connection(rqstp, session, bcts->dir); - if (status == nfs_ok || status == nfserr_inval) + status = nfsd4_match_existing_connection(rqstp, session, + bcts->dir, &conn); + if (status == nfs_ok) { + if (bcts->dir == NFS4_CDFC4_FORE_OR_BOTH || + bcts->dir == NFS4_CDFC4_BACK) + conn->cn_flags |= NFS4_CDFC4_BACK; + nfsd4_probe_callback(session->se_client); + goto out; + } + if (status == nfserr_inval) goto out; status = nfsd4_map_bcts_dir(&bcts->dir); if (status) -- cgit v1.2.3 From bbc9a6eb5eec03dcafee266b19f56295e3b2aa8f Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 17 Aug 2021 07:55:40 +0800 Subject: btrfs: replace BUG_ON() in btrfs_csum_one_bio() with proper error handling There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error. It has indeed caught several bugs during subpage development. But the BUG_ON() itself will bring down the whole system which is an overkill. Replace it with a WARN() and exit gracefully, so that it won't crash the whole system while we can still catch the code logic error. Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file-item.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index 2673c6ba7a4e..0b9401a5afd3 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -665,7 +665,18 @@ blk_status_t btrfs_csum_one_bio(struct btrfs_inode *inode, struct bio *bio, if (!ordered) { ordered = btrfs_lookup_ordered_extent(inode, offset); - BUG_ON(!ordered); /* Logic error */ + /* + * The bio range is not covered by any ordered extent, + * must be a code logic error. + */ + if (unlikely(!ordered)) { + WARN(1, KERN_WARNING + "no ordered extent for root %llu ino %llu offset %llu\n", + inode->root->root_key.objectid, + btrfs_ino(inode), offset); + kvfree(sums); + return BLK_STS_IOERR; + } } nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info, -- cgit v1.2.3 From acbee9aff8aea4b9b66ab3d5cee6b8dbc153dc38 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 8 Sep 2021 16:29:26 +0100 Subject: btrfs: fix transaction handle leak after verity rollback failure During a verity rollback, if we fail to update the inode or delete the orphan, we abort the transaction and return without releasing our transaction handle. Fix that by releasing the handle. Fixes: 146054090b0859 ("btrfs: initial fsverity support") Fixes: 705242538ff348 ("btrfs: verity metadata orphan items") Reviewed-by: Boris Burkov Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/verity.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/verity.c b/fs/btrfs/verity.c index 28d443d3ef93..4968535dfff0 100644 --- a/fs/btrfs/verity.c +++ b/fs/btrfs/verity.c @@ -451,7 +451,7 @@ static int del_orphan(struct btrfs_trans_handle *trans, struct btrfs_inode *inod */ static int rollback_verity(struct btrfs_inode *inode) { - struct btrfs_trans_handle *trans; + struct btrfs_trans_handle *trans = NULL; struct btrfs_root *root = inode->root; int ret; @@ -473,6 +473,7 @@ static int rollback_verity(struct btrfs_inode *inode) trans = btrfs_start_transaction(root, 2); if (IS_ERR(trans)) { ret = PTR_ERR(trans); + trans = NULL; btrfs_handle_fs_error(root->fs_info, ret, "failed to start transaction in verity rollback %llu", (u64)inode->vfs_inode.i_ino); @@ -490,8 +491,9 @@ static int rollback_verity(struct btrfs_inode *inode) btrfs_abort_transaction(trans, ret); goto out; } - btrfs_end_transaction(trans); out: + if (trans) + btrfs_end_transaction(trans); return ret; } -- cgit v1.2.3 From 6b225baababf1e3d41a4250e802cbd193e1343fb Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 8 Sep 2021 19:05:44 +0100 Subject: btrfs: fix mount failure due to past and transient device flush error When we get an error flushing one device, during a super block commit, we record the error in the device structure, in the field 'last_flush_error'. This is used to later check if we should error out the super block commit, depending on whether the number of flush errors is greater than or equals to the maximum tolerated device failures for a raid profile. However if we get a transient device flush error, unmount the filesystem and later try to mount it, we can fail the mount because we treat that past error as critical and consider the device is missing. Even if it's very likely that the error will happen again, as it's probably due to a hardware related problem, there may be cases where the error might not happen again. One example is during testing, and a test case like the new generic/648 from fstests always triggers this. The test cases generic/019 and generic/475 also trigger this scenario, but very sporadically. When this happens we get an error like this: $ mount /dev/sdc /mnt mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error. $ dmesg (...) [12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount [12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices [12918.890853] BTRFS error (device sdc): open_ctree failed The failure happens because when btrfs_check_rw_degradable() is called at mount time, or at remount from RO to RW time, is sees a non zero value in a device's ->last_flush_error attribute, and therefore considers that the device is 'missing'. Fix this by setting a device's ->last_flush_error to zero when we close a device, making sure the error is not seen on the next mount attempt. We only need to track flush errors during the current mount, so that we never commit a super block if such errors happened. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 464485aa7318..2ec3b8ac8fa3 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1137,6 +1137,19 @@ static void btrfs_close_one_device(struct btrfs_device *device) atomic_set(&device->dev_stats_ccnt, 0); extent_io_tree_release(&device->alloc_state); + /* + * Reset the flush error record. We might have a transient flush error + * in this mount, and if so we aborted the current transaction and set + * the fs to an error state, guaranteeing no super blocks can be further + * committed. However that error might be transient and if we unmount the + * filesystem and mount it again, we should allow the mount to succeed + * (btrfs_check_rw_degradable() should not fail) - if after mounting the + * filesystem again we still get flush errors, then we will again abort + * any transaction and set the error state, guaranteeing no commits of + * unsafe super blocks. + */ + device->last_flush_error = 0; + /* Verify the device is back in a pristine state */ ASSERT(!test_bit(BTRFS_DEV_STATE_FLUSH_SENT, &device->dev_state)); ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state)); -- cgit v1.2.3 From 0619b7901473c380abc05d45cf9c70bee0707db3 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 16 Sep 2021 20:43:29 +0800 Subject: btrfs: prevent __btrfs_dump_space_info() to underflow its free space It's not uncommon where __btrfs_dump_space_info() gets called under over-commit situations. In that case free space would underflow as total allocated space is not enough to handle all the over-committed space. Such underflow values can sometimes cause confusion for users enabled enospc_debug mount option, and takes some seconds for developers to convert the underflow value to signed result. Just output the free space as s64 to avoid such problem. Reported-by: Eli V Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/space-info.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c index 5ada02e0e629..aa5be0b24987 100644 --- a/fs/btrfs/space-info.c +++ b/fs/btrfs/space-info.c @@ -414,9 +414,10 @@ static void __btrfs_dump_space_info(struct btrfs_fs_info *fs_info, { lockdep_assert_held(&info->lock); - btrfs_info(fs_info, "space_info %llu has %llu free, is %sfull", + /* The free space could be negative in case of overcommit */ + btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull", info->flags, - info->total_bytes - btrfs_space_info_used(info, true), + (s64)(info->total_bytes - btrfs_space_info_used(info, true)), info->full ? "" : "not "); btrfs_info(fs_info, "space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu zone_unusable=%llu", -- cgit v1.2.3 From e3fc065682ebbbd15b0ce0036800f4acbf765d46 Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 18:14:26 +0000 Subject: cifs: Deferred close performance improvements During unlink/rename instead of closing all the deferred handles under tcon, close only handles under the requested dentry. Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 3 +++ fs/cifs/inode.c | 6 +++--- fs/cifs/misc.c | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 43 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 54966c1a8eb6..d0f85b666662 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -267,6 +267,9 @@ extern void cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode); extern void cifs_close_all_deferred_files(struct cifs_tcon *cifs_tcon); +extern void cifs_close_deferred_file_under_dentry(struct cifs_tcon *cifs_tcon, + const char *path); + extern struct TCP_Server_Info *cifs_get_tcp_session(struct smb3_fs_context *ctx); extern void cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect); diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 19af2d0ec8d5..82848412ad85 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1624,7 +1624,7 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry) goto unlink_out; } - cifs_close_deferred_file(CIFS_I(inode)); + cifs_close_deferred_file_under_dentry(tcon, full_path); if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability))) { rc = CIFSPOSIXDelFile(xid, tcon, full_path, @@ -2113,9 +2113,9 @@ cifs_rename2(struct user_namespace *mnt_userns, struct inode *source_dir, goto cifs_rename_exit; } - cifs_close_deferred_file(CIFS_I(d_inode(source_dentry))); + cifs_close_deferred_file_under_dentry(tcon, from_name); if (d_inode(target_dentry) != NULL) - cifs_close_deferred_file(CIFS_I(d_inode(target_dentry))); + cifs_close_deferred_file_under_dentry(tcon, to_name); rc = cifs_do_rename(xid, source_dentry, from_name, target_dentry, to_name); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index f4313935e734..05138f92d905 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -780,6 +780,43 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon) kfree(tmp_list); } } +void +cifs_close_deferred_file_under_dentry(struct cifs_tcon *tcon, const char *path) +{ + struct cifsFileInfo *cfile; + struct list_head *tmp; + struct file_list *tmp_list, *tmp_next_list; + struct list_head file_head; + void *page; + const char *full_path; + + INIT_LIST_HEAD(&file_head); + page = alloc_dentry_path(); + spin_lock(&tcon->open_file_lock); + list_for_each(tmp, &tcon->openFileList) { + cfile = list_entry(tmp, struct cifsFileInfo, tlist); + full_path = build_path_from_dentry(cfile->dentry, page); + if (strstr(full_path, path)) { + if (delayed_work_pending(&cfile->deferred)) { + if (cancel_delayed_work(&cfile->deferred)) { + tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); + if (tmp_list == NULL) + break; + tmp_list->cfile = cfile; + list_add_tail(&tmp_list->list, &file_head); + } + } + } + } + spin_unlock(&tcon->open_file_lock); + + list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) { + _cifsFileInfo_put(tmp_list->cfile, true, false); + list_del(&tmp_list->list); + kfree(tmp_list); + } + free_dentry_path(page); +} /* parses DFS refferal V3 structure * caller is responsible for freeing target_nodes -- cgit v1.2.3 From 71826b068884050d5fdd37fda857ba1539c513d3 Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 17:29:42 +0000 Subject: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s! Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/misc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 05138f92d905..03da00eb7c04 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -735,7 +735,7 @@ cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode) if (cancel_delayed_work(&cfile->deferred)) { tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); if (tmp_list == NULL) - continue; + break; tmp_list->cfile = cfile; list_add_tail(&tmp_list->list, &file_head); } @@ -766,7 +766,7 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon) if (cancel_delayed_work(&cfile->deferred)) { tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); if (tmp_list == NULL) - continue; + break; tmp_list->cfile = cfile; list_add_tail(&tmp_list->list, &file_head); } -- cgit v1.2.3 From 35866f3f779aef5e7ba84e4d1023fe2e2a0e219e Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 16:50:40 -0500 Subject: cifs: Not to defer close on file when lock is set Close file immediately when lock is set. Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/file.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 7dd9878e26bf..e916470468ea 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1399,6 +1399,7 @@ struct cifsInodeInfo { #define CIFS_INO_INVALID_MAPPING (4) /* pagecache is invalid */ #define CIFS_INO_LOCK (5) /* lock bit for synchronization */ #define CIFS_INO_MODIFIED_ATTR (6) /* Indicate change in mtime/ctime */ +#define CIFS_INO_CLOSE_ON_LOCK (7) /* Not to defer the close when lock is set */ unsigned long flags; spinlock_t writers_lock; unsigned int writers; /* Number of writers on this inode */ diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 4d10c9343890..6796fc73b304 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -882,6 +882,7 @@ int cifs_close(struct inode *inode, struct file *file) dclose = kmalloc(sizeof(struct cifs_deferred_close), GFP_KERNEL); if ((cinode->oplock == CIFS_CACHE_RHW_FLG) && cinode->lease_granted && + !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) && dclose) { if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { inode->i_ctime = inode->i_mtime = current_time(inode); @@ -1864,6 +1865,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *flock) cifs_read_flock(flock, &type, &lock, &unlock, &wait_flag, tcon->ses->server); cifs_sb = CIFS_FILE_SB(file); + set_bit(CIFS_INO_CLOSE_ON_LOCK, &CIFS_I(d_inode(cfile->dentry))->flags); if (cap_unix(tcon->ses) && (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) && -- cgit v1.2.3 From f58eae6c5fa882d6d0a6b7587a099602a59d57b5 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Fri, 17 Sep 2021 22:14:08 +0900 Subject: ksmbd: prevent out of share access Because of .., files outside the share directory could be accessed. To prevent this, normalize the given path and remove all . and .. components. In addition to the usual large set of regression tests (smbtorture and xfstests), ran various tests on this to specifically check path name validation including libsmb2 tests to verify path normalization: ./examples/smb2-ls-async smb://172.30.1.15/homes2/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/..bar/ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar.. ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../../../../ Signed-off-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/misc.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++------- fs/ksmbd/misc.h | 3 +-- fs/ksmbd/smb2pdu.c | 14 ++++++---- 3 files changed, 77 insertions(+), 16 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 0b307ca28a19..3eac3c01749f 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -191,19 +191,77 @@ int get_nlink(struct kstat *st) return nlink; } -void ksmbd_conv_path_to_unix(char *path) +char *ksmbd_conv_path_to_unix(char *path) { + size_t path_len, remain_path_len, out_path_len; + char *out_path, *out_next; + int i, pre_dotdot_cnt = 0, slash_cnt = 0; + bool is_last; + strreplace(path, '\\', '/'); -} + path_len = strlen(path); + remain_path_len = path_len; + if (path_len == 0) + return ERR_PTR(-EINVAL); -void ksmbd_strip_last_slash(char *path) -{ - int len = strlen(path); + out_path = kzalloc(path_len + 2, GFP_KERNEL); + if (!out_path) + return ERR_PTR(-ENOMEM); + out_path_len = 0; + out_next = out_path; + + do { + char *name = path + path_len - remain_path_len; + char *next = strchrnul(name, '/'); + size_t name_len = next - name; + + is_last = !next[0]; + if (name_len == 2 && name[0] == '.' && name[1] == '.') { + pre_dotdot_cnt++; + /* handle the case that path ends with "/.." */ + if (is_last) + goto follow_dotdot; + } else { + if (pre_dotdot_cnt) { +follow_dotdot: + slash_cnt = 0; + for (i = out_path_len - 1; i >= 0; i--) { + if (out_path[i] == '/' && + ++slash_cnt == pre_dotdot_cnt + 1) + break; + } + + if (i < 0 && + slash_cnt != pre_dotdot_cnt) { + kfree(out_path); + return ERR_PTR(-EINVAL); + } + + out_next = &out_path[i+1]; + *out_next = '\0'; + out_path_len = i + 1; - while (len && path[len - 1] == '/') { - path[len - 1] = '\0'; - len--; - } + } + + if (name_len != 0 && + !(name_len == 1 && name[0] == '.') && + !(name_len == 2 && name[0] == '.' && name[1] == '.')) { + next[0] = '\0'; + sprintf(out_next, "%s/", name); + out_next += name_len + 1; + out_path_len += name_len + 1; + next[0] = '/'; + } + pre_dotdot_cnt = 0; + } + + remain_path_len -= name_len + 1; + } while (!is_last); + + if (out_path_len > 0) + out_path[out_path_len-1] = '\0'; + path[path_len] = '\0'; + return out_path; } void ksmbd_conv_path_to_windows(char *path) diff --git a/fs/ksmbd/misc.h b/fs/ksmbd/misc.h index af8717d4d85b..b7b10139ada2 100644 --- a/fs/ksmbd/misc.h +++ b/fs/ksmbd/misc.h @@ -16,8 +16,7 @@ int ksmbd_validate_filename(char *filename); int parse_stream_name(char *filename, char **stream_name, int *s_type); char *convert_to_nt_pathname(char *filename, char *sharepath); int get_nlink(struct kstat *st); -void ksmbd_conv_path_to_unix(char *path); -void ksmbd_strip_last_slash(char *path); +char *ksmbd_conv_path_to_unix(char *path); void ksmbd_conv_path_to_windows(char *path); char *ksmbd_extract_sharename(char *treename); char *convert_to_unix_name(struct ksmbd_share_config *share, char *name); diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index c86164dc70bb..46e0275a77a8 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -634,7 +634,7 @@ static char * smb2_get_name(struct ksmbd_share_config *share, const char *src, const int maxlen, struct nls_table *local_nls) { - char *name, *unixname; + char *name, *norm_name, *unixname; name = smb_strndup_from_utf16(src, maxlen, 1, local_nls); if (IS_ERR(name)) { @@ -643,11 +643,15 @@ smb2_get_name(struct ksmbd_share_config *share, const char *src, } /* change it to absolute unix name */ - ksmbd_conv_path_to_unix(name); - ksmbd_strip_last_slash(name); - - unixname = convert_to_unix_name(share, name); + norm_name = ksmbd_conv_path_to_unix(name); + if (IS_ERR(norm_name)) { + kfree(name); + return norm_name; + } kfree(name); + + unixname = convert_to_unix_name(share, norm_name); + kfree(norm_name); if (!unixname) { pr_err("can not convert absolute name\n"); return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From e7165b1dff06b6e4373ab7758b21f3d9ed8a64ca Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:25 +0200 Subject: pinctrl/rockchip: add a queue for deferred pin output settings on probe The separation of pinctrl and gpio drivers created a tiny window where a pinconfig setting might produce a null-pointer dereference. The affected device were rk3288-veyron devices in this case. Pinctrl-hogs are claimed when the pinctrl driver is registered, at which point their pinconfig settings will be applied. At this time the now separate gpio devices will not have been created yet and the matching driver won't have probed yet, making the gpio->foo() call run into a null-ptr. As probing is not really guaranteed to have been completed at a specific time, introduce a queue that can hold the output settings until the gpio driver has probed and will (in a separate patch) fetch the elements of the list. We expect the gpio driver to empty the list, but will nevertheless empty it ourself on remove if that didn't happen. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210913224926.1260726-4-heiko@sntech.de Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 67 ++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-rockchip.h | 10 ++++++ 2 files changed, 77 insertions(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index ae33e376695f..5ce260f152ce 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2092,6 +2092,23 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, return false; } +static int rockchip_pinconf_defer_output(struct rockchip_pin_bank *bank, + unsigned int pin, u32 arg) +{ + struct rockchip_pin_output_deferred *cfg; + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->pin = pin; + cfg->arg = arg; + + list_add_tail(&cfg->head, &bank->deferred_output); + + return 0; +} + /* set the pin config settings for a specified pin */ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *configs, unsigned num_configs) @@ -2136,6 +2153,22 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, if (rc != RK_FUNC_GPIO) return -EINVAL; + /* + * Check for gpio driver not being probed yet. + * The lock makes sure that either gpio-probe has completed + * or the gpio driver hasn't probed yet. + */ + mutex_lock(&bank->deferred_lock); + if (!gpio || !gpio->direction_output) { + rc = rockchip_pinconf_defer_output(bank, pin - bank->pin_base, arg); + mutex_unlock(&bank->deferred_lock); + if (rc) + return rc; + + break; + } + mutex_unlock(&bank->deferred_lock); + rc = gpio->direction_output(gpio, pin - bank->pin_base, arg); if (rc) @@ -2204,6 +2237,11 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, if (rc != RK_FUNC_GPIO) return -EINVAL; + if (!gpio || !gpio->get) { + arg = 0; + break; + } + rc = gpio->get(gpio, pin - bank->pin_base); if (rc < 0) return rc; @@ -2450,6 +2488,9 @@ static int rockchip_pinctrl_register(struct platform_device *pdev, pin_bank->name, pin); pdesc++; } + + INIT_LIST_HEAD(&pin_bank->deferred_output); + mutex_init(&pin_bank->deferred_lock); } ret = rockchip_pinctrl_parse_dt(pdev, info); @@ -2716,6 +2757,31 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev) return 0; } +static int rockchip_pinctrl_remove(struct platform_device *pdev) +{ + struct rockchip_pinctrl *info = platform_get_drvdata(pdev); + struct rockchip_pin_bank *bank; + struct rockchip_pin_output_deferred *cfg; + int i; + + of_platform_depopulate(&pdev->dev); + + for (i = 0; i < info->ctrl->nr_banks; i++) { + bank = &info->ctrl->pin_banks[i]; + + mutex_lock(&bank->deferred_lock); + while (!list_empty(&bank->deferred_output)) { + cfg = list_first_entry(&bank->deferred_output, + struct rockchip_pin_output_deferred, head); + list_del(&cfg->head); + kfree(cfg); + } + mutex_unlock(&bank->deferred_lock); + } + + return 0; +} + static struct rockchip_pin_bank px30_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, @@ -3175,6 +3241,7 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = { static struct platform_driver rockchip_pinctrl_driver = { .probe = rockchip_pinctrl_probe, + .remove = rockchip_pinctrl_remove, .driver = { .name = "rockchip-pinctrl", .pm = &rockchip_pinctrl_dev_pm_ops, diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h index 589d4d2a98c9..91f10279d084 100644 --- a/drivers/pinctrl/pinctrl-rockchip.h +++ b/drivers/pinctrl/pinctrl-rockchip.h @@ -141,6 +141,8 @@ struct rockchip_drv { * @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode * @recalced_mask: bit mask to indicate a need to recalulate the mask * @route_mask: bits describing the routing pins of per bank + * @deferred_output: gpio output settings to be done after gpio bank probed + * @deferred_lock: mutex for the deferred_output shared btw gpio and pinctrl */ struct rockchip_pin_bank { struct device *dev; @@ -169,6 +171,8 @@ struct rockchip_pin_bank { u32 toggle_edge_mode; u32 recalced_mask; u32 route_mask; + struct list_head deferred_output; + struct mutex deferred_lock; }; /** @@ -243,6 +247,12 @@ struct rockchip_pin_config { unsigned int nconfigs; }; +struct rockchip_pin_output_deferred { + struct list_head head; + unsigned int pin; + u32 arg; +}; + /** * struct rockchip_pin_group: represent group of pins of a pinmux function. * @name: name of the pin group, used to lookup the group. -- cgit v1.2.3 From 59dd178e1d7cb6cac03b32aba7ed9bbce6761b6f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:26 +0200 Subject: gpio/rockchip: fetch deferred output settings on probe Fetch the output settings the pinctrl driver may have created for pinctrl hogs and set the relevant pins as requested. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210913224926.1260726-5-heiko@sntech.de Signed-off-by: Linus Walleij --- drivers/gpio/gpio-rockchip.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 036b2d959503..d67c64a39e47 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -689,6 +689,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev) struct device_node *pctlnp = of_get_parent(np); struct pinctrl_dev *pctldev = NULL; struct rockchip_pin_bank *bank = NULL; + struct rockchip_pin_output_deferred *cfg; static int gpio; int id, ret; @@ -716,12 +717,33 @@ static int rockchip_gpio_probe(struct platform_device *pdev) if (ret) return ret; + /* + * Prevent clashes with a deferred output setting + * being added right at this moment. + */ + mutex_lock(&bank->deferred_lock); + ret = rockchip_gpiolib_register(bank); if (ret) { clk_disable_unprepare(bank->clk); + mutex_unlock(&bank->deferred_lock); return ret; } + while (!list_empty(&bank->deferred_output)) { + cfg = list_first_entry(&bank->deferred_output, + struct rockchip_pin_output_deferred, head); + list_del(&cfg->head); + + ret = rockchip_gpio_direction_output(&bank->gpio_chip, cfg->pin, cfg->arg); + if (ret) + dev_warn(dev, "setting output pin %u to %u failed\n", cfg->pin, cfg->arg); + + kfree(cfg); + } + + mutex_unlock(&bank->deferred_lock); + platform_set_drvdata(pdev, bank); dev_info(dev, "probed %pOF\n", np); -- cgit v1.2.3 From 6d56262c3d224699b29b9bb6b4ace8bab7d692c2 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 18 Sep 2021 18:45:12 +0900 Subject: ksmbd: add validation for FILE_FULL_EA_INFORMATION of smb2_get_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add validation to check whether req->InputBufferLength is smaller than smb2_ea_info_req structure size. Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 46e0275a77a8..6304c9bda479 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4045,6 +4045,10 @@ static int smb2_get_ea(struct ksmbd_work *work, struct ksmbd_file *fp, path = &fp->filp->f_path; /* single EA entry is requested with given user.* name */ if (req->InputBufferLength) { + if (le32_to_cpu(req->InputBufferLength) < + sizeof(struct smb2_ea_info_req)) + return -EINVAL; + ea_req = (struct smb2_ea_info_req *)req->Buffer; } else { /* need to send all EAs, if no specific EA is requested*/ -- cgit v1.2.3 From 4170d3dd1467e9d78cb9af374b19357dc324b328 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 Sep 2021 13:53:33 +0300 Subject: iio: ssp_sensors: fix error code in ssp_print_mcu_debug() The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero. Reported-by: Jonathan Cameron Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210914105333.GA11657@kili Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/common/ssp_sensors/ssp_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c index 4864c38b8d1c..77449b4f3df5 100644 --- a/drivers/iio/common/ssp_sensors/ssp_spi.c +++ b/drivers/iio/common/ssp_sensors/ssp_spi.c @@ -137,7 +137,7 @@ static int ssp_print_mcu_debug(char *data_frame, int *data_index, if (length > received_len - *data_index || length <= 0) { ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n", length, received_len); - return length ? length : -EPROTO; + return -EPROTO; } ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]); -- cgit v1.2.3 From 8167c9a375ccceed19048ad9d68cb2d02ed276e0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Sep 2021 12:13:36 +0300 Subject: iio: ssp_sensors: add more range checking in ssp_parse_dataframe() The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/common/ssp_sensors/ssp_spi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c index 77449b4f3df5..769bd9280524 100644 --- a/drivers/iio/common/ssp_sensors/ssp_spi.c +++ b/drivers/iio/common/ssp_sensors/ssp_spi.c @@ -273,6 +273,8 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len) for (idx = 0; idx < len;) { switch (dataframe[idx++]) { case SSP_MSG2AP_INST_BYPASS_DATA: + if (idx >= len) + return -EPROTO; sd = dataframe[idx++]; if (sd < 0 || sd >= SSP_SENSOR_MAX) { dev_err(SSP_DEV, @@ -282,10 +284,13 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len) if (indio_devs[sd]) { spd = iio_priv(indio_devs[sd]); - if (spd->process_data) + if (spd->process_data) { + if (idx >= len) + return -EPROTO; spd->process_data(indio_devs[sd], &dataframe[idx], data->timestamp); + } } else { dev_err(SSP_DEV, "no client for frame\n"); } @@ -293,6 +298,8 @@ static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len) idx += ssp_offset_map[sd]; break; case SSP_MSG2AP_INST_DEBUG_DATA: + if (idx >= len) + return -EPROTO; sd = ssp_print_mcu_debug(dataframe, &idx, len); if (sd) { dev_err(SSP_DEV, -- cgit v1.2.3 From f0c15b360fb65ee39849afe987c16eb3d0175d0d Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 14 Sep 2021 16:57:46 +0200 Subject: media: ir_toy: prevent device from hanging during transmit If the IR Toy is receiving IR while a transmit is done, it may end up hanging. We can prevent this from happening by re-entering sample mode just before issuing the transmit command. Link: https://github.com/bengtmartensson/HarcHardware/discussions/25 Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir_toy.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c index 3e729a17b35f..48d52baec1a1 100644 --- a/drivers/media/rc/ir_toy.c +++ b/drivers/media/rc/ir_toy.c @@ -24,6 +24,7 @@ static const u8 COMMAND_VERSION[] = { 'v' }; // End transmit and repeat reset command so we exit sump mode static const u8 COMMAND_RESET[] = { 0xff, 0xff, 0, 0, 0, 0, 0 }; static const u8 COMMAND_SMODE_ENTER[] = { 's' }; +static const u8 COMMAND_SMODE_EXIT[] = { 0 }; static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 }; #define REPLY_XMITCOUNT 't' @@ -309,12 +310,30 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count) buf[i] = cpu_to_be16(v); } - buf[count] = cpu_to_be16(0xffff); + buf[count] = 0xffff; irtoy->tx_buf = buf; irtoy->tx_len = size; irtoy->emitted = 0; + // There is an issue where if the unit is receiving IR while the + // first TXSTART command is sent, the device might end up hanging + // with its led on. It does not respond to any command when this + // happens. To work around this, re-enter sample mode. + err = irtoy_command(irtoy, COMMAND_SMODE_EXIT, + sizeof(COMMAND_SMODE_EXIT), STATE_RESET); + if (err) { + dev_err(irtoy->dev, "exit sample mode: %d\n", err); + return err; + } + + err = irtoy_command(irtoy, COMMAND_SMODE_ENTER, + sizeof(COMMAND_SMODE_ENTER), STATE_COMMAND); + if (err) { + dev_err(irtoy->dev, "enter sample mode: %d\n", err); + return err; + } + err = irtoy_command(irtoy, COMMAND_TXSTART, sizeof(COMMAND_TXSTART), STATE_TX); kfree(buf); -- cgit v1.2.3 From cf9579976f724ad517cc15b7caadea728c7e245c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:32 +0300 Subject: net: mdio: introduce a shutdown method to mdio device drivers MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio_device.c | 11 +++++++++++ include/linux/mdio.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index c94cb5382dc9..250742ffdfd9 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -179,6 +179,16 @@ static int mdio_remove(struct device *dev) return 0; } +static void mdio_shutdown(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->shutdown) + mdiodrv->shutdown(mdiodev); +} + /** * mdio_driver_register - register an mdio_driver with the MDIO layer * @drv: new mdio_driver to register @@ -193,6 +203,7 @@ int mdio_driver_register(struct mdio_driver *drv) mdiodrv->driver.bus = &mdio_bus_type; mdiodrv->driver.probe = mdio_probe; mdiodrv->driver.remove = mdio_remove; + mdiodrv->driver.shutdown = mdio_shutdown; retval = driver_register(&mdiodrv->driver); if (retval) { diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ffb787d5ebde..5e6dc38f418e 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -80,6 +80,9 @@ struct mdio_driver { /* Clears up any memory if needed */ void (*remove)(struct mdio_device *mdiodev); + + /* Quiesces the device on system shutdown, turns off interrupts etc */ + void (*shutdown)(struct mdio_device *mdiodev); }; static inline struct mdio_driver * -- cgit v1.2.3 From 0650bf52b31ff35dc6430fc2e37969c36baba724 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:33 +0300 Subject: net: dsa: be compatible with masters which unregister on shutdown Lino reports that on his system with bcmgenet as DSA master and KSZ9897 as a switch, rebooting or shutting down never works properly. What does the bcmgenet driver have special to trigger this, that other DSA masters do not? It has an implementation of ->shutdown which simply calls its ->remove implementation. Otherwise said, it unregisters its network interface on shutdown. This message can be seen in a loop, and it hangs the reboot process there: unregister_netdevice: waiting for eth0 to become free. Usage count = 3 So why 3? A usage count of 1 is normal for a registered network interface, and any virtual interface which links itself as an upper of that will increment it via dev_hold. In the case of DSA, this is the call path: dsa_slave_create -> netdev_upper_dev_link -> __netdev_upper_dev_link -> __netdev_adjacent_dev_insert -> dev_hold So a DSA switch with 3 interfaces will result in a usage count elevated by two, and netdev_wait_allrefs will wait until they have gone away. Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and delete themselves, but DSA cannot just vanish and go poof, at most it can unbind itself from the switch devices, but that must happen strictly earlier compared to when the DSA master unregisters its net_device, so reacting on the NETDEV_UNREGISTER event is way too late. It seems that it is a pretty established pattern to have a driver's ->shutdown hook redirect to its ->remove hook, so the same code is executed regardless of whether the driver is unbound from the device, or the system is just shutting down. As Florian puts it, it is quite a big hammer for bcmgenet to unregister its net_device during shutdown, but having a common code path with the driver unbind helps ensure it is well tested. So DSA, for better or for worse, has to live with that and engage in an arms race of implementing the ->shutdown hook too, from all individual drivers, and do something sane when paired with masters that unregister their net_device there. The only sane thing to do, of course, is to unlink from the master. However, complications arise really quickly. The pattern of redirecting ->shutdown to ->remove is not unique to bcmgenet or even to net_device drivers. In fact, SPI controllers do it too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers and MDIO controllers do it too (this is something I have not researched too deeply, but even if this is not the case today, it is certainly plausible to happen in the future, and must be taken into consideration). Since DSA switches might be SPI devices, I2C devices, MDIO devices, the insane implication is that for the exact same DSA switch device, we might have both ->shutdown and ->remove getting called. So we need to do something with that insane environment. The pattern I've come up with is "if this, then not that", so if either ->shutdown or ->remove gets called, we set the device's drvdata to NULL, and in the other hook, we check whether the drvdata is NULL and just do nothing. This is probably not necessary for platform devices, just for devices on buses, but I would really insist for consistency among drivers, because when code is copy-pasted, it is not always copy-pasted from the best sources. So depending on whether the DSA switch's ->remove or ->shutdown will get called first, we cannot really guarantee even for the same driver if rebooting will result in the same code path on all platforms. But nonetheless, we need to do something minimally reasonable on ->shutdown too to fix the bug. Of course, the ->remove will do more (a full teardown of the tree, with all data structures freed, and this is why the bug was not caught for so long). The new ->shutdown method is kept separate from dsa_unregister_switch not because we couldn't have unregistered the switch, but simply in the interest of doing something quick and to the point. The big question is: does the DSA switch's ->shutdown get called earlier than the DSA master's ->shutdown? If not, there is still a risk that we might still trigger the WARN_ON in unregister_netdevice that says we are attempting to unregister a net_device which has uppers. That's no good. Although the reference to the master net_device won't physically go away even if DSA's ->shutdown comes afterwards, remember we have a dev_hold on it. The answer to that question lies in this comment above device_link_add: * A side effect of the link creation is re-ordering of dpm_list and the * devices_kset list by moving the consumer device and all devices depending * on it to the ends of these lists (that does not happen to devices that have * not been registered when this function is called). so the fact that DSA uses device_link_add towards its master is not exactly for nothing. device_shutdown() walks devices_kset from the back, so this is our guarantee that DSA's shutdown happens before the master's shutdown. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_mdio.c | 21 +++++++++++-- drivers/net/dsa/b53/b53_mmap.c | 13 ++++++++ drivers/net/dsa/b53/b53_priv.h | 5 +++ drivers/net/dsa/b53/b53_spi.c | 13 ++++++++ drivers/net/dsa/b53/b53_srab.c | 21 +++++++++++-- drivers/net/dsa/bcm_sf2.c | 12 +++++++ drivers/net/dsa/dsa_loop.c | 22 ++++++++++++- drivers/net/dsa/lan9303-core.c | 6 ++++ drivers/net/dsa/lan9303.h | 1 + drivers/net/dsa/lan9303_i2c.c | 24 +++++++++++--- drivers/net/dsa/lan9303_mdio.c | 15 +++++++++ drivers/net/dsa/lantiq_gswip.c | 18 +++++++++++ drivers/net/dsa/microchip/ksz8795_spi.c | 11 ++++++- drivers/net/dsa/microchip/ksz9477_i2c.c | 14 +++++++-- drivers/net/dsa/microchip/ksz9477_spi.c | 8 +++-- drivers/net/dsa/mt7530.c | 18 +++++++++++ drivers/net/dsa/mv88e6060.c | 18 +++++++++++ drivers/net/dsa/mv88e6xxx/chip.c | 22 ++++++++++++- drivers/net/dsa/ocelot/felix_vsc9959.c | 20 ++++++++++-- drivers/net/dsa/ocelot/seville_vsc9953.c | 20 ++++++++++-- drivers/net/dsa/qca/ar9331.c | 18 +++++++++++ drivers/net/dsa/qca8k.c | 18 +++++++++++ drivers/net/dsa/realtek-smi-core.c | 20 +++++++++++- drivers/net/dsa/sja1105/sja1105_main.c | 21 +++++++++++-- drivers/net/dsa/vitesse-vsc73xx-core.c | 6 ++++ drivers/net/dsa/vitesse-vsc73xx-platform.c | 22 ++++++++++++- drivers/net/dsa/vitesse-vsc73xx-spi.c | 22 ++++++++++++- drivers/net/dsa/vitesse-vsc73xx.h | 1 + include/net/dsa.h | 1 + net/dsa/dsa2.c | 50 ++++++++++++++++++++++++++++++ 30 files changed, 457 insertions(+), 24 deletions(-) diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c index a533a90e3904..a7aeb3c132c9 100644 --- a/drivers/net/dsa/b53/b53_mdio.c +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -351,9 +351,25 @@ static int b53_mdio_probe(struct mdio_device *mdiodev) static void b53_mdio_remove(struct mdio_device *mdiodev) { struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); - struct dsa_switch *ds = dev->ds; - dsa_unregister_switch(ds); + if (!dev) + return; + + b53_switch_remove(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void b53_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id b53_of_match[] = { @@ -373,6 +389,7 @@ MODULE_DEVICE_TABLE(of, b53_of_match); static struct mdio_driver b53_mdio_driver = { .probe = b53_mdio_probe, .remove = b53_mdio_remove, + .shutdown = b53_mdio_shutdown, .mdiodrv.driver = { .name = "bcm53xx", .of_match_table = b53_of_match, diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c index 82680e083cc2..ae4c79d39bc0 100644 --- a/drivers/net/dsa/b53/b53_mmap.c +++ b/drivers/net/dsa/b53/b53_mmap.c @@ -316,9 +316,21 @@ static int b53_mmap_remove(struct platform_device *pdev) if (dev) b53_switch_remove(dev); + platform_set_drvdata(pdev, NULL); + return 0; } +static void b53_mmap_shutdown(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (dev) + b53_switch_shutdown(dev); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id b53_mmap_of_table[] = { { .compatible = "brcm,bcm3384-switch" }, { .compatible = "brcm,bcm6328-switch" }, @@ -331,6 +343,7 @@ MODULE_DEVICE_TABLE(of, b53_mmap_of_table); static struct platform_driver b53_mmap_driver = { .probe = b53_mmap_probe, .remove = b53_mmap_remove, + .shutdown = b53_mmap_shutdown, .driver = { .name = "b53-switch", .of_match_table = b53_mmap_of_table, diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h index 5d068acf7cf8..959a52d41f0a 100644 --- a/drivers/net/dsa/b53/b53_priv.h +++ b/drivers/net/dsa/b53/b53_priv.h @@ -228,6 +228,11 @@ static inline void b53_switch_remove(struct b53_device *dev) dsa_unregister_switch(dev->ds); } +static inline void b53_switch_shutdown(struct b53_device *dev) +{ + dsa_switch_shutdown(dev->ds); +} + #define b53_build_op(type_op_size, val_type) \ static inline int b53_##type_op_size(struct b53_device *dev, u8 page, \ u8 reg, val_type val) \ diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c index ecb9f7f6b335..01e37b75471e 100644 --- a/drivers/net/dsa/b53/b53_spi.c +++ b/drivers/net/dsa/b53/b53_spi.c @@ -321,9 +321,21 @@ static int b53_spi_remove(struct spi_device *spi) if (dev) b53_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } +static void b53_spi_shutdown(struct spi_device *spi) +{ + struct b53_device *dev = spi_get_drvdata(spi); + + if (dev) + b53_switch_shutdown(dev); + + spi_set_drvdata(spi, NULL); +} + static const struct of_device_id b53_spi_of_match[] = { { .compatible = "brcm,bcm5325" }, { .compatible = "brcm,bcm5365" }, @@ -344,6 +356,7 @@ static struct spi_driver b53_spi_driver = { }, .probe = b53_spi_probe, .remove = b53_spi_remove, + .shutdown = b53_spi_shutdown, }; module_spi_driver(b53_spi_driver); diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c index 3f4249de70c5..4591bb1c05d2 100644 --- a/drivers/net/dsa/b53/b53_srab.c +++ b/drivers/net/dsa/b53/b53_srab.c @@ -629,17 +629,34 @@ static int b53_srab_probe(struct platform_device *pdev) static int b53_srab_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); - struct b53_srab_priv *priv = dev->priv; - b53_srab_intr_set(priv, false); + if (!dev) + return 0; + + b53_srab_intr_set(dev->priv, false); b53_switch_remove(dev); + platform_set_drvdata(pdev, NULL); + return 0; } +static void b53_srab_shutdown(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + platform_set_drvdata(pdev, NULL); +} + static struct platform_driver b53_srab_driver = { .probe = b53_srab_probe, .remove = b53_srab_remove, + .shutdown = b53_srab_shutdown, .driver = { .name = "b53-srab-switch", .of_match_table = b53_srab_of_match, diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index b6c4b3adb171..7578a5c38df5 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1512,6 +1512,9 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); + if (!priv) + return 0; + priv->wol_ports_mask = 0; /* Disable interrupts */ bcm_sf2_intr_disable(priv); @@ -1523,6 +1526,8 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) if (priv->type == BCM7278_DEVICE_ID) reset_control_assert(priv->rcdev); + platform_set_drvdata(pdev, NULL); + return 0; } @@ -1530,6 +1535,9 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); + if (!priv) + return; + /* For a kernel about to be kexec'd we want to keep the GPHY on for a * successful MDIO bus scan to occur. If we did turn off the GPHY * before (e.g: port_disable), this will also power it back on. @@ -1538,6 +1546,10 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) */ if (priv->hw_params.num_gphy == 1) bcm_sf2_gphy_enable_set(priv->dev->ds, true); + + dsa_switch_shutdown(priv->dev->ds); + + platform_set_drvdata(pdev, NULL); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c index bfdf3324aac3..e638e3eea911 100644 --- a/drivers/net/dsa/dsa_loop.c +++ b/drivers/net/dsa/dsa_loop.c @@ -340,10 +340,29 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev) static void dsa_loop_drv_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); - struct dsa_loop_priv *ps = ds->priv; + struct dsa_loop_priv *ps; + + if (!ds) + return; + + ps = ds->priv; dsa_unregister_switch(ds); dev_put(ps->netdev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void dsa_loop_drv_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static struct mdio_driver dsa_loop_drv = { @@ -352,6 +371,7 @@ static struct mdio_driver dsa_loop_drv = { }, .probe = dsa_loop_drv_probe, .remove = dsa_loop_drv_remove, + .shutdown = dsa_loop_drv_shutdown, }; #define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index d7ce281570b5..89f920289ae2 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1379,6 +1379,12 @@ int lan9303_remove(struct lan9303 *chip) } EXPORT_SYMBOL(lan9303_remove); +void lan9303_shutdown(struct lan9303 *chip) +{ + dsa_switch_shutdown(chip->ds); +} +EXPORT_SYMBOL(lan9303_shutdown); + MODULE_AUTHOR("Juergen Borleis "); MODULE_DESCRIPTION("Core driver for SMSC/Microchip LAN9303 three port ethernet switch"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lan9303.h b/drivers/net/dsa/lan9303.h index 11f590b64701..c7f73efa50f0 100644 --- a/drivers/net/dsa/lan9303.h +++ b/drivers/net/dsa/lan9303.h @@ -10,3 +10,4 @@ extern const struct lan9303_phy_ops lan9303_indirect_phy_ops; int lan9303_probe(struct lan9303 *chip, struct device_node *np); int lan9303_remove(struct lan9303 *chip); +void lan9303_shutdown(struct lan9303 *chip); diff --git a/drivers/net/dsa/lan9303_i2c.c b/drivers/net/dsa/lan9303_i2c.c index 9bffaef65a04..8ca4713310fa 100644 --- a/drivers/net/dsa/lan9303_i2c.c +++ b/drivers/net/dsa/lan9303_i2c.c @@ -67,13 +67,28 @@ static int lan9303_i2c_probe(struct i2c_client *client, static int lan9303_i2c_remove(struct i2c_client *client) { - struct lan9303_i2c *sw_dev; + struct lan9303_i2c *sw_dev = i2c_get_clientdata(client); - sw_dev = i2c_get_clientdata(client); if (!sw_dev) - return -ENODEV; + return 0; + + lan9303_remove(&sw_dev->chip); + + i2c_set_clientdata(client, NULL); + + return 0; +} + +static void lan9303_i2c_shutdown(struct i2c_client *client) +{ + struct lan9303_i2c *sw_dev = i2c_get_clientdata(client); + + if (!sw_dev) + return; + + lan9303_shutdown(&sw_dev->chip); - return lan9303_remove(&sw_dev->chip); + i2c_set_clientdata(client, NULL); } /*-------------------------------------------------------------------------*/ @@ -97,6 +112,7 @@ static struct i2c_driver lan9303_i2c_driver = { }, .probe = lan9303_i2c_probe, .remove = lan9303_i2c_remove, + .shutdown = lan9303_i2c_shutdown, .id_table = lan9303_i2c_id, }; module_i2c_driver(lan9303_i2c_driver); diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c index 9cbe80460b53..bbb7032409ba 100644 --- a/drivers/net/dsa/lan9303_mdio.c +++ b/drivers/net/dsa/lan9303_mdio.c @@ -138,6 +138,20 @@ static void lan9303_mdio_remove(struct mdio_device *mdiodev) return; lan9303_remove(&sw_dev->chip); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void lan9303_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct lan9303_mdio *sw_dev = dev_get_drvdata(&mdiodev->dev); + + if (!sw_dev) + return; + + lan9303_shutdown(&sw_dev->chip); + + dev_set_drvdata(&mdiodev->dev, NULL); } /*-------------------------------------------------------------------------*/ @@ -155,6 +169,7 @@ static struct mdio_driver lan9303_mdio_driver = { }, .probe = lan9303_mdio_probe, .remove = lan9303_mdio_remove, + .shutdown = lan9303_mdio_shutdown, }; mdio_module_driver(lan9303_mdio_driver); diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 267324889dd6..3ff4b7e177f3 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -2184,6 +2184,9 @@ static int gswip_remove(struct platform_device *pdev) struct gswip_priv *priv = platform_get_drvdata(pdev); int i; + if (!priv) + return 0; + /* disable the switch */ gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); @@ -2197,9 +2200,23 @@ static int gswip_remove(struct platform_device *pdev) for (i = 0; i < priv->num_gphy_fw; i++) gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + platform_set_drvdata(pdev, NULL); + return 0; } +static void gswip_shutdown(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct gswip_hw_info gswip_xrx200 = { .max_ports = 7, .cpu_port = 6, @@ -2223,6 +2240,7 @@ MODULE_DEVICE_TABLE(of, gswip_of_match); static struct platform_driver gswip_driver = { .probe = gswip_probe, .remove = gswip_remove, + .shutdown = gswip_shutdown, .driver = { .name = "gswip", .of_match_table = gswip_of_match, diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c index ea7550d1b634..866767b70d65 100644 --- a/drivers/net/dsa/microchip/ksz8795_spi.c +++ b/drivers/net/dsa/microchip/ksz8795_spi.c @@ -94,6 +94,8 @@ static int ksz8795_spi_remove(struct spi_device *spi) if (dev) ksz_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } @@ -101,8 +103,15 @@ static void ksz8795_spi_shutdown(struct spi_device *spi) { struct ksz_device *dev = spi_get_drvdata(spi); - if (dev && dev->dev_ops->shutdown) + if (!dev) + return; + + if (dev->dev_ops->shutdown) dev->dev_ops->shutdown(dev); + + dsa_switch_shutdown(dev->ds); + + spi_set_drvdata(spi, NULL); } static const struct of_device_id ksz8795_dt_ids[] = { diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 4e053a25d077..f3afb8b8c4cc 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -56,7 +56,10 @@ static int ksz9477_i2c_remove(struct i2c_client *i2c) { struct ksz_device *dev = i2c_get_clientdata(i2c); - ksz_switch_remove(dev); + if (dev) + ksz_switch_remove(dev); + + i2c_set_clientdata(i2c, NULL); return 0; } @@ -65,8 +68,15 @@ static void ksz9477_i2c_shutdown(struct i2c_client *i2c) { struct ksz_device *dev = i2c_get_clientdata(i2c); - if (dev && dev->dev_ops->shutdown) + if (!dev) + return; + + if (dev->dev_ops->shutdown) dev->dev_ops->shutdown(dev); + + dsa_switch_shutdown(dev->ds); + + i2c_set_clientdata(i2c, NULL); } static const struct i2c_device_id ksz9477_i2c_id[] = { diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c index 15bc11b3cda4..e3cb0e6c9f6f 100644 --- a/drivers/net/dsa/microchip/ksz9477_spi.c +++ b/drivers/net/dsa/microchip/ksz9477_spi.c @@ -72,6 +72,8 @@ static int ksz9477_spi_remove(struct spi_device *spi) if (dev) ksz_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } @@ -79,8 +81,10 @@ static void ksz9477_spi_shutdown(struct spi_device *spi) { struct ksz_device *dev = spi_get_drvdata(spi); - if (dev && dev->dev_ops->shutdown) - dev->dev_ops->shutdown(dev); + if (dev) + dsa_switch_shutdown(dev->ds); + + spi_set_drvdata(spi, NULL); } static const struct of_device_id ksz9477_dt_ids[] = { diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index d0cba2d1cd68..094737e5084a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -3286,6 +3286,9 @@ mt7530_remove(struct mdio_device *mdiodev) struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); int ret = 0; + if (!priv) + return; + ret = regulator_disable(priv->core_pwr); if (ret < 0) dev_err(priv->dev, @@ -3301,11 +3304,26 @@ mt7530_remove(struct mdio_device *mdiodev) dsa_unregister_switch(priv->ds); mutex_destroy(&priv->reg_mutex); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mt7530_shutdown(struct mdio_device *mdiodev) +{ + struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, .remove = mt7530_remove, + .shutdown = mt7530_shutdown, .mdiodrv.driver = { .name = "mt7530", .of_match_table = mt7530_of_match, diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 24b8219fd607..a4c6eb9a52d0 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -290,7 +290,24 @@ static void mv88e6060_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + if (!ds) + return; + dsa_unregister_switch(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mv88e6060_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id mv88e6060_of_match[] = { @@ -303,6 +320,7 @@ static const struct of_device_id mv88e6060_of_match[] = { static struct mdio_driver mv88e6060_driver = { .probe = mv88e6060_probe, .remove = mv88e6060_remove, + .shutdown = mv88e6060_shutdown, .mdiodrv.driver = { .name = "mv88e6060", .of_match_table = mv88e6060_of_match, diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index c45ca2473743..fb10422d2c33 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -6389,7 +6389,12 @@ out: static void mv88e6xxx_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); - struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_chip *chip; + + if (!ds) + return; + + chip = ds->priv; if (chip->info->ptp_support) { mv88e6xxx_hwtstamp_free(chip); @@ -6410,6 +6415,20 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mv88e6xxx_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id mv88e6xxx_of_match[] = { @@ -6433,6 +6452,7 @@ MODULE_DEVICE_TABLE(of, mv88e6xxx_of_match); static struct mdio_driver mv88e6xxx_driver = { .probe = mv88e6xxx_probe, .remove = mv88e6xxx_remove, + .shutdown = mv88e6xxx_shutdown, .mdiodrv.driver = { .name = "mv88e6085", .of_match_table = mv88e6xxx_of_match, diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 9e2ac8e46619..11b42fd812e4 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1472,9 +1472,10 @@ err_pci_enable: static void felix_pci_remove(struct pci_dev *pdev) { - struct felix *felix; + struct felix *felix = pci_get_drvdata(pdev); - felix = pci_get_drvdata(pdev); + if (!felix) + return; dsa_unregister_switch(felix->ds); @@ -1482,6 +1483,20 @@ static void felix_pci_remove(struct pci_dev *pdev) kfree(felix); pci_disable_device(pdev); + + pci_set_drvdata(pdev, NULL); +} + +static void felix_pci_shutdown(struct pci_dev *pdev) +{ + struct felix *felix = pci_get_drvdata(pdev); + + if (!felix) + return; + + dsa_switch_shutdown(felix->ds); + + pci_set_drvdata(pdev, NULL); } static struct pci_device_id felix_ids[] = { @@ -1498,6 +1513,7 @@ static struct pci_driver felix_vsc9959_pci_driver = { .id_table = felix_ids, .probe = felix_pci_probe, .remove = felix_pci_remove, + .shutdown = felix_pci_shutdown, }; module_pci_driver(felix_vsc9959_pci_driver); diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c index deae923c8b7a..de1d34a1f1e4 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -1245,18 +1245,33 @@ err_alloc_felix: static int seville_remove(struct platform_device *pdev) { - struct felix *felix; + struct felix *felix = platform_get_drvdata(pdev); - felix = platform_get_drvdata(pdev); + if (!felix) + return 0; dsa_unregister_switch(felix->ds); kfree(felix->ds); kfree(felix); + platform_set_drvdata(pdev, NULL); + return 0; } +static void seville_shutdown(struct platform_device *pdev) +{ + struct felix *felix = platform_get_drvdata(pdev); + + if (!felix) + return; + + dsa_switch_shutdown(felix->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id seville_of_match[] = { { .compatible = "mscc,vsc9953-switch" }, { }, @@ -1266,6 +1281,7 @@ MODULE_DEVICE_TABLE(of, seville_of_match); static struct platform_driver seville_vsc9953_driver = { .probe = seville_probe, .remove = seville_remove, + .shutdown = seville_shutdown, .driver = { .name = "mscc_seville", .of_match_table = of_match_ptr(seville_of_match), diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index 563d8a279030..a6bfb6abc51a 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -1083,6 +1083,9 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev) struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); unsigned int i; + if (!priv) + return; + for (i = 0; i < ARRAY_SIZE(priv->port); i++) { struct ar9331_sw_port *port = &priv->port[i]; @@ -1094,6 +1097,20 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev) dsa_unregister_switch(&priv->ds); reset_control_assert(priv->sw_reset); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void ar9331_sw_shutdown(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(&priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id ar9331_sw_of_match[] = { @@ -1104,6 +1121,7 @@ static const struct of_device_id ar9331_sw_of_match[] = { static struct mdio_driver ar9331_sw_mdio_driver = { .probe = ar9331_sw_probe, .remove = ar9331_sw_remove, + .shutdown = ar9331_sw_shutdown, .mdiodrv.driver = { .name = AR9331_SW_NAME, .of_match_table = ar9331_sw_of_match, diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index bda5a9bf4f52..a984f06f6f04 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1880,10 +1880,27 @@ qca8k_sw_remove(struct mdio_device *mdiodev) struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); int i; + if (!priv) + return; + for (i = 0; i < QCA8K_NUM_PORTS; i++) qca8k_port_set_status(priv, i, 0); dsa_unregister_switch(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void qca8k_sw_shutdown(struct mdio_device *mdiodev) +{ + struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } #ifdef CONFIG_PM_SLEEP @@ -1940,6 +1957,7 @@ static const struct of_device_id qca8k_of_match[] = { static struct mdio_driver qca8kmdio_driver = { .probe = qca8k_sw_probe, .remove = qca8k_sw_remove, + .shutdown = qca8k_sw_shutdown, .mdiodrv.driver = { .name = "qca8k", .of_match_table = qca8k_of_match, diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index 8e49d4f85d48..dd2f0d6208b3 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -464,16 +464,33 @@ static int realtek_smi_probe(struct platform_device *pdev) static int realtek_smi_remove(struct platform_device *pdev) { - struct realtek_smi *smi = dev_get_drvdata(&pdev->dev); + struct realtek_smi *smi = platform_get_drvdata(pdev); + + if (!smi) + return 0; dsa_unregister_switch(smi->ds); if (smi->slave_mii_bus) of_node_put(smi->slave_mii_bus->dev.of_node); gpiod_set_value(smi->reset, 1); + platform_set_drvdata(pdev, NULL); + return 0; } +static void realtek_smi_shutdown(struct platform_device *pdev) +{ + struct realtek_smi *smi = platform_get_drvdata(pdev); + + if (!smi) + return; + + dsa_switch_shutdown(smi->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id realtek_smi_of_match[] = { { .compatible = "realtek,rtl8366rb", @@ -495,6 +512,7 @@ static struct platform_driver realtek_smi_driver = { }, .probe = realtek_smi_probe, .remove = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, }; module_platform_driver(realtek_smi_driver); diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 2f8cc6686c38..7c0db80eff00 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -3335,13 +3335,29 @@ static int sja1105_probe(struct spi_device *spi) static int sja1105_remove(struct spi_device *spi) { struct sja1105_private *priv = spi_get_drvdata(spi); - struct dsa_switch *ds = priv->ds; - dsa_unregister_switch(ds); + if (!priv) + return 0; + + dsa_unregister_switch(priv->ds); + + spi_set_drvdata(spi, NULL); return 0; } +static void sja1105_shutdown(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + spi_set_drvdata(spi, NULL); +} + static const struct of_device_id sja1105_dt_ids[] = { { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, @@ -3365,6 +3381,7 @@ static struct spi_driver sja1105_driver = { }, .probe = sja1105_probe, .remove = sja1105_remove, + .shutdown = sja1105_shutdown, }; module_spi_driver(sja1105_driver); diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 19ce4aa0973b..a4b1447ff055 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -1225,6 +1225,12 @@ int vsc73xx_remove(struct vsc73xx *vsc) } EXPORT_SYMBOL(vsc73xx_remove); +void vsc73xx_shutdown(struct vsc73xx *vsc) +{ + dsa_switch_shutdown(vsc->ds); +} +EXPORT_SYMBOL(vsc73xx_shutdown); + MODULE_AUTHOR("Linus Walleij "); MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/vitesse-vsc73xx-platform.c b/drivers/net/dsa/vitesse-vsc73xx-platform.c index 2a57f337b2a2..fe4b154a0a57 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-platform.c +++ b/drivers/net/dsa/vitesse-vsc73xx-platform.c @@ -116,7 +116,26 @@ static int vsc73xx_platform_remove(struct platform_device *pdev) { struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev); - return vsc73xx_remove(&vsc_platform->vsc); + if (!vsc_platform) + return 0; + + vsc73xx_remove(&vsc_platform->vsc); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void vsc73xx_platform_shutdown(struct platform_device *pdev) +{ + struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev); + + if (!vsc_platform) + return; + + vsc73xx_shutdown(&vsc_platform->vsc); + + platform_set_drvdata(pdev, NULL); } static const struct vsc73xx_ops vsc73xx_platform_ops = { @@ -144,6 +163,7 @@ MODULE_DEVICE_TABLE(of, vsc73xx_of_match); static struct platform_driver vsc73xx_platform_driver = { .probe = vsc73xx_platform_probe, .remove = vsc73xx_platform_remove, + .shutdown = vsc73xx_platform_shutdown, .driver = { .name = "vsc73xx-platform", .of_match_table = vsc73xx_of_match, diff --git a/drivers/net/dsa/vitesse-vsc73xx-spi.c b/drivers/net/dsa/vitesse-vsc73xx-spi.c index 81eca4a5781d..645398901e05 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-spi.c +++ b/drivers/net/dsa/vitesse-vsc73xx-spi.c @@ -163,7 +163,26 @@ static int vsc73xx_spi_remove(struct spi_device *spi) { struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi); - return vsc73xx_remove(&vsc_spi->vsc); + if (!vsc_spi) + return 0; + + vsc73xx_remove(&vsc_spi->vsc); + + spi_set_drvdata(spi, NULL); + + return 0; +} + +static void vsc73xx_spi_shutdown(struct spi_device *spi) +{ + struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi); + + if (!vsc_spi) + return; + + vsc73xx_shutdown(&vsc_spi->vsc); + + spi_set_drvdata(spi, NULL); } static const struct vsc73xx_ops vsc73xx_spi_ops = { @@ -191,6 +210,7 @@ MODULE_DEVICE_TABLE(of, vsc73xx_of_match); static struct spi_driver vsc73xx_spi_driver = { .probe = vsc73xx_spi_probe, .remove = vsc73xx_spi_remove, + .shutdown = vsc73xx_spi_shutdown, .driver = { .name = "vsc73xx-spi", .of_match_table = vsc73xx_of_match, diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h index 7478f8d4e0a9..30b951504e65 100644 --- a/drivers/net/dsa/vitesse-vsc73xx.h +++ b/drivers/net/dsa/vitesse-vsc73xx.h @@ -27,3 +27,4 @@ struct vsc73xx_ops { int vsc73xx_is_addr_valid(u8 block, u8 subblock); int vsc73xx_probe(struct vsc73xx *vsc); int vsc73xx_remove(struct vsc73xx *vsc); +void vsc73xx_shutdown(struct vsc73xx *vsc); diff --git a/include/net/dsa.h b/include/net/dsa.h index 258867eff230..6e29c0e080f6 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -1046,6 +1046,7 @@ static inline int dsa_ndo_eth_ioctl(struct net_device *dev, struct ifreq *ifr, void dsa_unregister_switch(struct dsa_switch *ds); int dsa_register_switch(struct dsa_switch *ds); +void dsa_switch_shutdown(struct dsa_switch *ds); struct dsa_switch *dsa_switch_find(int tree_index, int sw_index); #ifdef CONFIG_PM_SLEEP int dsa_switch_suspend(struct dsa_switch *ds); diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index eef13cd20f19..fa88e58705f0 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -1562,3 +1562,53 @@ void dsa_unregister_switch(struct dsa_switch *ds) mutex_unlock(&dsa2_mutex); } EXPORT_SYMBOL_GPL(dsa_unregister_switch); + +/* If the DSA master chooses to unregister its net_device on .shutdown, DSA is + * blocking that operation from completion, due to the dev_hold taken inside + * netdev_upper_dev_link. Unlink the DSA slave interfaces from being uppers of + * the DSA master, so that the system can reboot successfully. + */ +void dsa_switch_shutdown(struct dsa_switch *ds) +{ + struct net_device *master, *slave_dev; + LIST_HEAD(unregister_list); + struct dsa_port *dp; + + mutex_lock(&dsa2_mutex); + rtnl_lock(); + + list_for_each_entry(dp, &ds->dst->ports, list) { + if (dp->ds != ds) + continue; + + if (!dsa_port_is_user(dp)) + continue; + + master = dp->cpu_dp->master; + slave_dev = dp->slave; + + netdev_upper_dev_unlink(master, slave_dev); + /* Just unlinking ourselves as uppers of the master is not + * sufficient. When the master net device unregisters, that will + * also call dev_close, which we will catch as NETDEV_GOING_DOWN + * and trigger a dev_close on our own devices (dsa_slave_close). + * In turn, that will call dev_mc_unsync on the master's net + * device. If the master is also a DSA switch port, this will + * trigger dsa_slave_set_rx_mode which will call dev_mc_sync on + * its own master. Lockdep will complain about the fact that + * all cascaded masters have the same dsa_master_addr_list_lock_key, + * which it normally would not do if the cascaded masters would + * be in a proper upper/lower relationship, which we've just + * destroyed. + * To suppress the lockdep warnings, let's actually unregister + * the DSA slave interfaces too, to avoid the nonsensical + * multicast address list synchronization on shutdown. + */ + unregister_netdevice_queue(slave_dev, &unregister_list); + } + unregister_netdevice_many(&unregister_list); + + rtnl_unlock(); + mutex_unlock(&dsa2_mutex); +} +EXPORT_SYMBOL_GPL(dsa_switch_shutdown); -- cgit v1.2.3 From 46baae56e1001a771a5d132aa883cb5605013ae2 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:34 +0300 Subject: net: dsa: hellcreek: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the hellcreek driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. Hellcreek is a platform device driver, so we probably cannot have the oddities of ->shutdown and ->remove getting both called for the exact same struct device. But to be in line with the pattern from the other device drivers which are on slow buses, implement the same "if this then not that" pattern of either running the ->shutdown or the ->remove hook. The driver's current ->remove implementation makes that very easy because it already zeroes out its device_drvdata on ->remove. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Kurt Kanzenbach Signed-off-by: David S. Miller --- drivers/net/dsa/hirschmann/hellcreek.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c index 542cfc4ccb08..354655f9ed00 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.c +++ b/drivers/net/dsa/hirschmann/hellcreek.c @@ -1916,6 +1916,9 @@ static int hellcreek_remove(struct platform_device *pdev) { struct hellcreek *hellcreek = platform_get_drvdata(pdev); + if (!hellcreek) + return 0; + hellcreek_hwtstamp_free(hellcreek); hellcreek_ptp_free(hellcreek); dsa_unregister_switch(hellcreek->ds); @@ -1924,6 +1927,18 @@ static int hellcreek_remove(struct platform_device *pdev) return 0; } +static void hellcreek_shutdown(struct platform_device *pdev) +{ + struct hellcreek *hellcreek = platform_get_drvdata(pdev); + + if (!hellcreek) + return; + + dsa_switch_shutdown(hellcreek->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct hellcreek_platform_data de1soc_r1_pdata = { .name = "r4c30", .num_ports = 4, @@ -1946,6 +1961,7 @@ MODULE_DEVICE_TABLE(of, hellcreek_of_match); static struct platform_driver hellcreek_driver = { .probe = hellcreek_probe, .remove = hellcreek_remove, + .shutdown = hellcreek_shutdown, .driver = { .name = "hellcreek", .of_match_table = hellcreek_of_match, -- cgit v1.2.3 From fe4053078cd0f02a3fa140c43660f327702a9f10 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:35 +0300 Subject: net: dsa: microchip: ksz8863: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Microchip sub-driver for KSZ8863 was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. Since this driver expects the MDIO bus to be backed by mdio_bitbang, I don't think there is currently any MDIO bus driver which implements its ->shutdown by redirecting it to ->remove, but in any case, to be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8863_smi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c index 11293485138c..5883fa7edda2 100644 --- a/drivers/net/dsa/microchip/ksz8863_smi.c +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -191,6 +191,18 @@ static void ksz8863_smi_remove(struct mdio_device *mdiodev) if (dev) ksz_switch_remove(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void ksz8863_smi_shutdown(struct mdio_device *mdiodev) +{ + struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (dev) + dsa_switch_shutdown(dev->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id ksz8863_dt_ids[] = { @@ -203,6 +215,7 @@ MODULE_DEVICE_TABLE(of, ksz8863_dt_ids); static struct mdio_driver ksz8863_driver = { .probe = ksz8863_smi_probe, .remove = ksz8863_smi_remove, + .shutdown = ksz8863_smi_shutdown, .mdiodrv.driver = { .name = "ksz8863-switch", .of_match_table = ksz8863_dt_ids, -- cgit v1.2.3 From a68e9da48568a0adf5dc817ef81971c0d1aa0672 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:36 +0300 Subject: net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: George McCollister Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/xrs700x/xrs700x.c | 6 ++++++ drivers/net/dsa/xrs700x/xrs700x.h | 1 + drivers/net/dsa/xrs700x/xrs700x_i2c.c | 18 ++++++++++++++++++ drivers/net/dsa/xrs700x/xrs700x_mdio.c | 18 ++++++++++++++++++ 4 files changed, 43 insertions(+) diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c index 130abb0f1438..469420941054 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.c +++ b/drivers/net/dsa/xrs700x/xrs700x.c @@ -822,6 +822,12 @@ void xrs700x_switch_remove(struct xrs700x *priv) } EXPORT_SYMBOL(xrs700x_switch_remove); +void xrs700x_switch_shutdown(struct xrs700x *priv) +{ + dsa_switch_shutdown(priv->ds); +} +EXPORT_SYMBOL(xrs700x_switch_shutdown); + MODULE_AUTHOR("George McCollister "); MODULE_DESCRIPTION("Arrow SpeedChips XRS700x DSA driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/xrs700x/xrs700x.h b/drivers/net/dsa/xrs700x/xrs700x.h index ff62cf61b091..4d58257471d2 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.h +++ b/drivers/net/dsa/xrs700x/xrs700x.h @@ -40,3 +40,4 @@ struct xrs700x { struct xrs700x *xrs700x_switch_alloc(struct device *base, void *devpriv); int xrs700x_switch_register(struct xrs700x *priv); void xrs700x_switch_remove(struct xrs700x *priv); +void xrs700x_switch_shutdown(struct xrs700x *priv); diff --git a/drivers/net/dsa/xrs700x/xrs700x_i2c.c b/drivers/net/dsa/xrs700x/xrs700x_i2c.c index 489d9385b4f0..6deae388a0d6 100644 --- a/drivers/net/dsa/xrs700x/xrs700x_i2c.c +++ b/drivers/net/dsa/xrs700x/xrs700x_i2c.c @@ -109,11 +109,28 @@ static int xrs700x_i2c_remove(struct i2c_client *i2c) { struct xrs700x *priv = i2c_get_clientdata(i2c); + if (!priv) + return 0; + xrs700x_switch_remove(priv); + i2c_set_clientdata(i2c, NULL); + return 0; } +static void xrs700x_i2c_shutdown(struct i2c_client *i2c) +{ + struct xrs700x *priv = i2c_get_clientdata(i2c); + + if (!priv) + return; + + xrs700x_switch_shutdown(priv); + + i2c_set_clientdata(i2c, NULL); +} + static const struct i2c_device_id xrs700x_i2c_id[] = { { "xrs700x-switch", 0 }, {}, @@ -137,6 +154,7 @@ static struct i2c_driver xrs700x_i2c_driver = { }, .probe = xrs700x_i2c_probe, .remove = xrs700x_i2c_remove, + .shutdown = xrs700x_i2c_shutdown, .id_table = xrs700x_i2c_id, }; diff --git a/drivers/net/dsa/xrs700x/xrs700x_mdio.c b/drivers/net/dsa/xrs700x/xrs700x_mdio.c index 44f58bee04a4..d01cf1073d49 100644 --- a/drivers/net/dsa/xrs700x/xrs700x_mdio.c +++ b/drivers/net/dsa/xrs700x/xrs700x_mdio.c @@ -136,7 +136,24 @@ static void xrs700x_mdio_remove(struct mdio_device *mdiodev) { struct xrs700x *priv = dev_get_drvdata(&mdiodev->dev); + if (!priv) + return; + xrs700x_switch_remove(priv); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void xrs700x_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct xrs700x *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + xrs700x_switch_shutdown(priv); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id __maybe_unused xrs700x_mdio_dt_ids[] = { @@ -155,6 +172,7 @@ static struct mdio_driver xrs700x_mdio_driver = { }, .probe = xrs700x_mdio_probe, .remove = xrs700x_mdio_remove, + .shutdown = xrs700x_mdio_shutdown, }; mdio_module_driver(xrs700x_mdio_driver); -- cgit v1.2.3 From 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 08:27:10 +0200 Subject: xen-netback: correct success/error reporting for the SKB-with-fraglist case When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway. Signed-off-by: Jan Beulich Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 39a01c2a3058..32d5bc4919d8 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -499,7 +499,7 @@ check_frags: * the header's copy failed, and they are * sharing a slot, send an error */ - if (i == 0 && sharedslot) + if (i == 0 && !first_shinfo && sharedslot) xenvif_idx_release(queue, pending_idx, XEN_NETIF_RSP_ERROR); else -- cgit v1.2.3 From afd92d82c9d715fb97565408755acad81573591a Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 17 Sep 2021 16:34:06 +0800 Subject: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. Cc: Xuan Zhuo Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Jason Wang Reviewed-by: Xuan Zhuo Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 271d38c1d9f8..79bd2585ec6b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -423,6 +423,10 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi, skb_reserve(skb, p - buf); skb_put(skb, len); + + page = (struct page *)page->private; + if (page) + give_pages(rq, page); goto ok; } -- cgit v1.2.3 From 7237a494decfa17d0b9d0076e6cee3235719de90 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 17 Sep 2021 13:22:05 +0300 Subject: enetc: Fix illegal access when reading affinity_hint irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 3ca93adb9662..7f90c27c0e79 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1879,7 +1879,6 @@ static void enetc_clear_bdrs(struct enetc_ndev_priv *priv) static int enetc_setup_irqs(struct enetc_ndev_priv *priv) { struct pci_dev *pdev = priv->si->pdev; - cpumask_t cpu_mask; int i, j, err; for (i = 0; i < priv->bdr_int_num; i++) { @@ -1908,9 +1907,7 @@ static int enetc_setup_irqs(struct enetc_ndev_priv *priv) enetc_wr(hw, ENETC_SIMSITRV(idx), entry); } - cpumask_clear(&cpu_mask); - cpumask_set_cpu(i % num_online_cpus(), &cpu_mask); - irq_set_affinity_hint(irq, &cpu_mask); + irq_set_affinity_hint(irq, get_cpu_mask(i % num_online_cpus())); } return 0; -- cgit v1.2.3 From 9f7afa05c9522b086327929ae622facab0f0f72b Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 17 Sep 2021 13:22:06 +0300 Subject: enetc: Fix uninitialized struct dim_sample field usage The only struct dim_sample member that does not get initialized by dim_update_sample() is comp_ctr. (There is special API to initialize comp_ctr: dim_update_sample_with_comps(), and it is currently used only for RDMA.) comp_ctr is used to compute curr_stats->cmps and curr_stats->cpe_ratio (see dim_calc_stats()) which in turn are consumed by the rdma_dim_*() API. Therefore, functionally, the net_dim*() API consumers are not affected. Nevertheless, fix the computation of statistics based on an uninitialized variable, even if the mentioned statistics are not used at the moment. Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 7f90c27c0e79..042327b9981f 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -419,7 +419,7 @@ static void enetc_rx_dim_work(struct work_struct *w) static void enetc_rx_net_dim(struct enetc_int_vector *v) { - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; v->comp_cnt++; -- cgit v1.2.3 From 87758511075ec961486fe78d7548dd709b524433 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Sep 2021 14:05:47 -0700 Subject: igc: fix build errors for PTP When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is not available to the igc driver. Make this driver depend on PTP_1588_CLOCK_OPTIONAL so that it will build without errors. Various igc commits have used ptp_*() functions without checking that PTP_1588_CLOCK is enabled. Fix all of these here. Fixes these build errors: ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other': igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event' ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info': igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225': igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin' ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init': igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop': igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister' ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS") Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command") Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225") Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP") Signed-off-by: Randy Dunlap Cc: Ederson de Souza Cc: Tony Nguyen Cc: Vinicius Costa Gomes Cc: Jeff Kirsher Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Jesse Brandeburg Cc: intel-wired-lan@lists.osuosl.org Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index b0b6f90deb7d..ed8ea63bb172 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -335,6 +335,7 @@ config IGC tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" default n depends on PCI + depends on PTP_1588_CLOCK_OPTIONAL help This driver supports Intel(R) Ethernet Controller I225-LM/I225-V family of adapters. -- cgit v1.2.3 From 48e6d083b3aa006052db687fb26eeceef1d325b6 Mon Sep 17 00:00:00 2001 From: Alejandro Concepcion-Rodriguez Date: Fri, 17 Sep 2021 18:49:59 +0000 Subject: docs: net: dsa: sja1105: fix reference to sja1105.txt The file sja1105.txt was converted to nxp,sja1105.yaml. Signed-off-by: Alejandro Concepcion-Rodriguez Signed-off-by: David S. Miller --- Documentation/networking/dsa/sja1105.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst index 564caeebe2b2..29b1bae0cf00 100644 --- a/Documentation/networking/dsa/sja1105.rst +++ b/Documentation/networking/dsa/sja1105.rst @@ -296,7 +296,7 @@ not available. Device Tree bindings and board design ===================================== -This section references ``Documentation/devicetree/bindings/net/dsa/sja1105.txt`` +This section references ``Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml`` and aims to showcase some potential switch caveats. RMII PHY role and out-of-band signaling -- cgit v1.2.3 From 2dcb96bacce36021c2f3eaae0cef607b5bb71ede Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 18 Sep 2021 14:42:35 +0200 Subject: net: core: Correct the sock::sk_lock.owned lockdep annotations lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It is just lockdep wise equivalent. In fact it's an open coded trivial mutex implementation with some interesting features. sock::sk_lock.slock is a regular spinlock protecting the 'mutex' representation sock::sk_lock.owned which is a plain boolean. If 'owned' is true, then some other task holds the 'mutex', otherwise it is uncontended. As this locking construct is obviously endangered by lock ordering issues as any other locking primitive it got lockdep annotated via a dedicated dependency map sock::sk_lock.dep_map which has to be updated at the lock and unlock sites. lock_sock_nested() is a straight forward 'mutex' lock operation: might_sleep(); spin_lock_bh(sock::sk_lock.slock) while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } The lockdep annotation for sock::sk_lock.owned is for unknown reasons _after_ the lock has been acquired, i.e. after the code block above and after releasing sock::sk_lock.slock, but inside the bottom halves disabled region: spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); The placement after the unlock is obvious because otherwise the mutex_acquire() would nest into the spin lock held region. But that's from the lockdep perspective still the wrong place: 1) The mutex_acquire() is issued _after_ the successful acquisition which is pointless because in a dead lock scenario this point is never reached which means that if the deadlock is the first instance of exposing the wrong lock order lockdep does not have a chance to detect it. 2) It only works because lockdep is rather lax on the context from which the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves and therefore non-preemptible region is obviously invalid, except for a trylock which is clearly not the case here. This 'works' stops working on RT enabled kernels where the bottom halves serialization is done via a local lock, which exposes this misplacement because the 'mutex' and the local lock nest the wrong way around and lockdep complains rightfully about a lock inversion. The placement is wrong since the initial commit a5b5bb9a053a ("[PATCH] lockdep: annotate sk_locks") which introduced this. Fix it by moving the mutex_acquire() in front of the actual lock acquisition, which is what the regular mutex_lock() operation does as well. lock_sock_fast() is not that straight forward. It looks at the first glance like a convoluted trylock operation: spin_lock_bh(sock::sk_lock.slock) if (!sock::sk_lock.owned) return false; while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); return true; But that's not the case: lock_sock_fast() is an interesting optimization for short critical sections which can run with bottom halves disabled and sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in the non contended case by preventing other lockers to acquire sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which in turn avoids the overhead of doing the heavy processing in release_sock() including waking up wait queue waiters. In the contended case, i.e. when sock::sk_lock.owned == true the behavior is the same as lock_sock_nested(). Semantically this shortcut means, that the task acquired the 'mutex' even if it does not touch the sock::sk_lock.owned field in the non-contended case. Not telling lockdep about this shortcut acquisition is hiding potential lock ordering violations in the fast path. As a consequence the same reasoning as for the above lock_sock_nested() case vs. the placement of the lockdep annotation applies. The current placement of the lockdep annotation was just copied from the original lock_sock(), now renamed to lock_sock_nested(), implementation. Fix this by moving the mutex_acquire() in front of the actual lock acquisition and adding the corresponding mutex_release() into unlock_sock_fast(). Also document the fast path return case with a comment. Reported-by: Sebastian Siewior Signed-off-by: Thomas Gleixner Cc: netdev@vger.kernel.org Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 1 + net/core/sock.c | 37 +++++++++++++++++++++++-------------- 2 files changed, 24 insertions(+), 14 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 66a9a90f9558..c005c3c750e8 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1640,6 +1640,7 @@ static inline void unlock_sock_fast(struct sock *sk, bool slow) release_sock(sk); __release(&sk->sk_lock.slock); } else { + mutex_release(&sk->sk_lock.dep_map, _RET_IP_); spin_unlock_bh(&sk->sk_lock.slock); } } diff --git a/net/core/sock.c b/net/core/sock.c index 62627e868e03..512e629f9780 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3179,17 +3179,15 @@ EXPORT_SYMBOL(sock_init_data); void lock_sock_nested(struct sock *sk, int subclass) { + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); + might_sleep(); spin_lock_bh(&sk->sk_lock.slock); if (sk->sk_lock.owned) __lock_sock(sk); sk->sk_lock.owned = 1; - spin_unlock(&sk->sk_lock.slock); - /* - * The sk_lock has mutex_lock() semantics here: - */ - mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); - local_bh_enable(); + spin_unlock_bh(&sk->sk_lock.slock); } EXPORT_SYMBOL(lock_sock_nested); @@ -3227,24 +3225,35 @@ EXPORT_SYMBOL(release_sock); */ bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) { + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); + might_sleep(); spin_lock_bh(&sk->sk_lock.slock); - if (!sk->sk_lock.owned) + if (!sk->sk_lock.owned) { /* - * Note : We must disable BH + * Fast path return with bottom halves disabled and + * sock::sk_lock.slock held. + * + * The 'mutex' is not contended and holding + * sock::sk_lock.slock prevents all other lockers to + * proceed so the corresponding unlock_sock_fast() can + * avoid the slow path of release_sock() completely and + * just release slock. + * + * From a semantical POV this is equivalent to 'acquiring' + * the 'mutex', hence the corresponding lockdep + * mutex_release() has to happen in the fast path of + * unlock_sock_fast(). */ return false; + } __lock_sock(sk); sk->sk_lock.owned = 1; - spin_unlock(&sk->sk_lock.slock); - /* - * The sk_lock has mutex_lock() semantics here: - */ - mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); __acquire(&sk->sk_lock.slock); - local_bh_enable(); + spin_unlock_bh(&sk->sk_lock.slock); return true; } EXPORT_SYMBOL(lock_sock_fast); -- cgit v1.2.3 From 163957c43d96c2409d9d9d2e94823f7300f6e52c Mon Sep 17 00:00:00 2001 From: Colin Foster Date: Fri, 17 Sep 2021 08:39:04 -0700 Subject: net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to phylink. Since priority flow control is disabled, writing the speed has no effect. Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros, which are incorrectly offset for GENMASK. Lastly, for priority flow control to properly function, some scenarios would rely on the rate adaptation from the PCS while the MAC speed would be fixed. So it isn't used, and even if it was, neither "speed" nor "mac_speed" are necessarily the correct values to be used. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index c581b955efb3..08be0440af28 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -569,10 +569,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port, ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed), DEV_CLOCK_CFG); - /* No PFC */ - ocelot_write_gix(ocelot, ANA_PFC_PFC_CFG_FC_LINK_SPEED(speed), - ANA_PFC_PFC_CFG, port); - /* Core: Enable port for frame transfer */ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); -- cgit v1.2.3 From ba68e9941984792f7e8a7be90b8245eb0d2b4d7b Mon Sep 17 00:00:00 2001 From: Colin Foster Date: Fri, 17 Sep 2021 08:39:05 -0700 Subject: net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was mistakenly left in. It used the variable "speed" which, previously, would would have been assigned a value of OCELOT_SPEED_1000. In phylink the variable is be SPEED_1000, which is invalid for the DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 08be0440af28..729ba826ba17 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -563,12 +563,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port, ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA | DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG); - /* Take MAC, Port, Phy (intern) and PCS (SGMII/Serdes) clock out of - * reset - */ - ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed), - DEV_CLOCK_CFG); - /* Core: Enable port for frame transfer */ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); -- cgit v1.2.3 From fdb475838539cb516caeeeaed06b4b5bc62c9179 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:20:58 +0200 Subject: net: freescale: drop unneeded MODULE_ALIAS The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 80bd5c629fa0..ec87b370bba1 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -4176,5 +4176,4 @@ static struct platform_driver fec_driver = { module_platform_driver(fec_driver); -MODULE_ALIAS("platform:"DRIVER_NAME); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From fd292c189a979838622d5e03e15fa688c81dd50b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 17:29:16 +0300 Subject: net: dsa: tear down devlink port regions when tearing down the devlink port on error Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal") decided it was fine to ignore errors on certain ports that fail to probe, and go on with the ports that do probe fine. Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port") noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get called, and devlink notices after a timeout of 3600 seconds and prints a WARN_ON. So it went ahead to unregister the devlink port. And because there exists an UNUSED port flavour, we actually re-register the devlink port as UNUSED. Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") added devlink port regions, which are set up by the driver and not by DSA. When we trigger the devlink port deregistration and reregistration as unused, devlink now prints another WARN_ON, from here: devlink_port_unregister: WARN_ON(!list_empty(&devlink_port->region_list)); So the port still has regions, which makes sense, because they were set up by the driver, and the driver doesn't know we're unregistering the devlink port. Somebody needs to tear them down, and optionally (actually it would be nice, to be consistent) set them up again for the new devlink port. But DSA's layering stays in our way quite badly here. The options I've considered are: 1. Introduce a function in devlink to just change a port's type and flavour. No dice, devlink keeps a lot of state, it really wants the port to not be registered when you set its parameters, so changing anything can only be done by destroying what we currently have and recreating it. 2. Make DSA cache the parameters passed to dsa_devlink_port_region_create, and the region returned, keep those in a list, then when the devlink port unregister needs to take place, the existing devlink regions are destroyed by DSA, and we replay the creation of new regions using the cached parameters. Problem: mv88e6xxx keeps the region pointers in chip->ports[port].region, and these will remain stale after DSA frees them. There are many things DSA can do, but updating mv88e6xxx's private pointers is not one of them. 3. Just let the driver do it (i.e. introduce a very specific method called ds->ops->port_reinit_as_unused, which unregisters its devlink port devlink regions, then the old devlink port, then registers the new one, then the devlink port regions for it). While it does work, as opposed to the others, it's pretty horrible from an API perspective and we can do better. 4. Introduce a new pair of methods, ->port_setup and ->port_teardown, which in the case of mv88e6xxx must register and unregister the devlink port regions. Call these 2 methods when the port must be reinitialized as unused. Naturally, I went for the 4th approach. Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 16 +++++++- drivers/net/dsa/mv88e6xxx/devlink.c | 73 +++++-------------------------------- drivers/net/dsa/mv88e6xxx/devlink.h | 6 ++- include/net/dsa.h | 8 ++++ net/dsa/dsa2.c | 51 +++++++++++++++++++++++--- 5 files changed, 81 insertions(+), 73 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index fb10422d2c33..8ab0be793811 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3071,7 +3071,7 @@ static void mv88e6xxx_teardown(struct dsa_switch *ds) { mv88e6xxx_teardown_devlink_params(ds); dsa_devlink_resources_unregister(ds); - mv88e6xxx_teardown_devlink_regions(ds); + mv88e6xxx_teardown_devlink_regions_global(ds); } static int mv88e6xxx_setup(struct dsa_switch *ds) @@ -3215,7 +3215,7 @@ unlock: if (err) goto out_resources; - err = mv88e6xxx_setup_devlink_regions(ds); + err = mv88e6xxx_setup_devlink_regions_global(ds); if (err) goto out_params; @@ -3229,6 +3229,16 @@ out_resources: return err; } +static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) +{ + return mv88e6xxx_setup_devlink_regions_port(ds, port); +} + +static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) +{ + mv88e6xxx_teardown_devlink_regions_port(ds, port); +} + /* prod_id for switch families which do not have a PHY model number */ static const u16 family_prod_id_table[] = { [MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341, @@ -6116,6 +6126,8 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .change_tag_protocol = mv88e6xxx_change_tag_protocol, .setup = mv88e6xxx_setup, .teardown = mv88e6xxx_teardown, + .port_setup = mv88e6xxx_port_setup, + .port_teardown = mv88e6xxx_port_teardown, .phylink_validate = mv88e6xxx_validate, .phylink_mac_link_state = mv88e6xxx_serdes_pcs_get_state, .phylink_mac_config = mv88e6xxx_mac_config, diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c index 0c0f5ea6680c..381068395c63 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.c +++ b/drivers/net/dsa/mv88e6xxx/devlink.c @@ -647,26 +647,25 @@ static struct mv88e6xxx_region mv88e6xxx_regions[] = { }, }; -static void -mv88e6xxx_teardown_devlink_regions_global(struct mv88e6xxx_chip *chip) +void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds) { + struct mv88e6xxx_chip *chip = ds->priv; int i; for (i = 0; i < ARRAY_SIZE(mv88e6xxx_regions); i++) dsa_devlink_region_destroy(chip->regions[i]); } -static void -mv88e6xxx_teardown_devlink_regions_port(struct mv88e6xxx_chip *chip, - int port) +void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port) { + struct mv88e6xxx_chip *chip = ds->priv; + dsa_devlink_region_destroy(chip->ports[port].region); } -static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip, - int port) +int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port) { + struct mv88e6xxx_chip *chip = ds->priv; struct devlink_region *region; region = dsa_devlink_port_region_create(ds, @@ -681,40 +680,10 @@ static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, return 0; } -static void -mv88e6xxx_teardown_devlink_regions_ports(struct mv88e6xxx_chip *chip) -{ - int port; - - for (port = 0; port < mv88e6xxx_num_ports(chip); port++) - mv88e6xxx_teardown_devlink_regions_port(chip, port); -} - -static int mv88e6xxx_setup_devlink_regions_ports(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip) -{ - int port; - int err; - - for (port = 0; port < mv88e6xxx_num_ports(chip); port++) { - err = mv88e6xxx_setup_devlink_regions_port(ds, chip, port); - if (err) - goto out; - } - - return 0; - -out: - while (port-- > 0) - mv88e6xxx_teardown_devlink_regions_port(chip, port); - - return err; -} - -static int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip) +int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds) { bool (*cond)(struct mv88e6xxx_chip *chip); + struct mv88e6xxx_chip *chip = ds->priv; struct devlink_region_ops *ops; struct devlink_region *region; u64 size; @@ -753,30 +722,6 @@ out: return PTR_ERR(region); } -int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds) -{ - struct mv88e6xxx_chip *chip = ds->priv; - int err; - - err = mv88e6xxx_setup_devlink_regions_global(ds, chip); - if (err) - return err; - - err = mv88e6xxx_setup_devlink_regions_ports(ds, chip); - if (err) - mv88e6xxx_teardown_devlink_regions_global(chip); - - return err; -} - -void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds) -{ - struct mv88e6xxx_chip *chip = ds->priv; - - mv88e6xxx_teardown_devlink_regions_ports(chip); - mv88e6xxx_teardown_devlink_regions_global(chip); -} - int mv88e6xxx_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, struct netlink_ext_ack *extack) diff --git a/drivers/net/dsa/mv88e6xxx/devlink.h b/drivers/net/dsa/mv88e6xxx/devlink.h index 3d72db3dcf95..65ce6a6858b9 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.h +++ b/drivers/net/dsa/mv88e6xxx/devlink.h @@ -12,8 +12,10 @@ int mv88e6xxx_devlink_param_get(struct dsa_switch *ds, u32 id, struct devlink_param_gset_ctx *ctx); int mv88e6xxx_devlink_param_set(struct dsa_switch *ds, u32 id, struct devlink_param_gset_ctx *ctx); -int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds); -void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds); +int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds); +void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds); +int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port); +void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port); int mv88e6xxx_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, diff --git a/include/net/dsa.h b/include/net/dsa.h index 6e29c0e080f6..d784e76113b8 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -585,8 +585,16 @@ struct dsa_switch_ops { int (*change_tag_protocol)(struct dsa_switch *ds, int port, enum dsa_tag_protocol proto); + /* Optional switch-wide initialization and destruction methods */ int (*setup)(struct dsa_switch *ds); void (*teardown)(struct dsa_switch *ds); + + /* Per-port initialization and destruction methods. Mandatory if the + * driver registers devlink port regions, optional otherwise. + */ + int (*port_setup)(struct dsa_switch *ds, int port); + void (*port_teardown)(struct dsa_switch *ds, int port); + u32 (*get_phy_flags)(struct dsa_switch *ds, int port); /* diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index fa88e58705f0..f14897d9b31d 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -429,6 +429,7 @@ static int dsa_port_setup(struct dsa_port *dp) { struct devlink_port *dlp = &dp->devlink_port; bool dsa_port_link_registered = false; + struct dsa_switch *ds = dp->ds; bool dsa_port_enabled = false; int err = 0; @@ -438,6 +439,12 @@ static int dsa_port_setup(struct dsa_port *dp) INIT_LIST_HEAD(&dp->fdbs); INIT_LIST_HEAD(&dp->mdbs); + if (ds->ops->port_setup) { + err = ds->ops->port_setup(ds, dp->index); + if (err) + return err; + } + switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); @@ -480,8 +487,11 @@ static int dsa_port_setup(struct dsa_port *dp) dsa_port_disable(dp); if (err && dsa_port_link_registered) dsa_port_link_unregister_of(dp); - if (err) + if (err) { + if (ds->ops->port_teardown) + ds->ops->port_teardown(ds, dp->index); return err; + } dp->setup = true; @@ -533,11 +543,15 @@ static int dsa_port_devlink_setup(struct dsa_port *dp) static void dsa_port_teardown(struct dsa_port *dp) { struct devlink_port *dlp = &dp->devlink_port; + struct dsa_switch *ds = dp->ds; struct dsa_mac_addr *a, *tmp; if (!dp->setup) return; + if (ds->ops->port_teardown) + ds->ops->port_teardown(ds, dp->index); + devlink_port_type_clear(dlp); switch (dp->type) { @@ -581,6 +595,36 @@ static void dsa_port_devlink_teardown(struct dsa_port *dp) dp->devlink_port_setup = false; } +/* Destroy the current devlink port, and create a new one which has the UNUSED + * flavour. At this point, any call to ds->ops->port_setup has been already + * balanced out by a call to ds->ops->port_teardown, so we know that any + * devlink port regions the driver had are now unregistered. We then call its + * ds->ops->port_setup again, in order for the driver to re-create them on the + * new devlink port. + */ +static int dsa_port_reinit_as_unused(struct dsa_port *dp) +{ + struct dsa_switch *ds = dp->ds; + int err; + + dsa_port_devlink_teardown(dp); + dp->type = DSA_PORT_TYPE_UNUSED; + err = dsa_port_devlink_setup(dp); + if (err) + return err; + + if (ds->ops->port_setup) { + /* On error, leave the devlink port registered, + * dsa_switch_teardown will clean it up later. + */ + err = ds->ops->port_setup(ds, dp->index); + if (err) + return err; + } + + return 0; +} + static int dsa_devlink_info_get(struct devlink *dl, struct devlink_info_req *req, struct netlink_ext_ack *extack) @@ -938,12 +982,9 @@ static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) list_for_each_entry(dp, &dst->ports, list) { err = dsa_port_setup(dp); if (err) { - dsa_port_devlink_teardown(dp); - dp->type = DSA_PORT_TYPE_UNUSED; - err = dsa_port_devlink_setup(dp); + err = dsa_port_reinit_as_unused(dp); if (err) goto teardown; - continue; } } -- cgit v1.2.3 From 029497e66bdc762e001880e4c85a91f35a54b1e2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 19 Sep 2021 13:57:25 +0200 Subject: net: bgmac-bcma: handle deferred probe error due to mac-address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar Cc: Michael Walle Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c index 85fa0ab7201c..9513cfb5ba58 100644 --- a/drivers/net/ethernet/broadcom/bgmac-bcma.c +++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c @@ -129,6 +129,8 @@ static int bgmac_probe(struct bcma_device *core) bcma_set_drvdata(core, bgmac); err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr); + if (err == -EPROBE_DEFER) + return err; /* If no MAC address assigned via device tree, check SPROM */ if (err) { -- cgit v1.2.3 From 48514a22333099b93c33ea1c7c97dad3f7a611ce Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 17 Sep 2021 13:26:14 -0600 Subject: selftests: net: af_unix: Fix incorrect args in test result msg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the args to fprintf(). Splitting the message ends up passing incorrect arg for "sigurg %d" and an extra arg overall. The test result message ends up incorrect. test_unix_oob.c: In function ‘main’: test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", | ~^ | | | int | %s 275 | "atmark %d\n", signal_recvd, len, oob, atmark); | ~~~~~~~~~~~~~ | | | char * test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", Signed-off-by: Shuah Khan Signed-off-by: David S. Miller --- tools/testing/selftests/net/af_unix/test_unix_oob.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c index 0f3e3763f4f8..3dece8b29253 100644 --- a/tools/testing/selftests/net/af_unix/test_unix_oob.c +++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c @@ -271,8 +271,9 @@ main(int argc, char **argv) read_oob(pfd, &oob); if (!signal_recvd || len != 127 || oob != '%' || atmark != 1) { - fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", - "atmark %d\n", signal_recvd, len, oob, atmark); + fprintf(stderr, + "Test 3 failed, sigurg %d len %d OOB %c atmark %d\n", + signal_recvd, len, oob, atmark); die(1); } -- cgit v1.2.3 From 72a3c58d18fd780eecd80178bb2132ce741a0a74 Mon Sep 17 00:00:00 2001 From: Lama Kayal Date: Sun, 19 Sep 2021 14:55:45 +0300 Subject: net/mlx4_en: Resolve bad operstate value Any link state change that's done prior to net device registration isn't reflected on the state, thus the operational state is left obsolete, with 'UNKNOWN' status. To resolve the issue, query link state from FW upon open operations to ensure operational state is updated. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Lama Kayal Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 47 ++++++++++++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 29 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a2f61a87cef8..35154635ec3a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1269,7 +1269,6 @@ static void mlx4_en_do_set_rx_mode(struct work_struct *work) if (!netif_carrier_ok(dev)) { if (!mlx4_en_QUERY_PORT(mdev, priv->port)) { if (priv->port_state.link_state) { - priv->last_link_state = MLX4_DEV_EVENT_PORT_UP; netif_carrier_on(dev); en_dbg(LINK, priv, "Link Up\n"); } @@ -1557,26 +1556,36 @@ static void mlx4_en_service_task(struct work_struct *work) mutex_unlock(&mdev->state_lock); } -static void mlx4_en_linkstate(struct work_struct *work) +static void mlx4_en_linkstate(struct mlx4_en_priv *priv) +{ + struct mlx4_en_port_state *port_state = &priv->port_state; + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + bool up; + + if (mlx4_en_QUERY_PORT(mdev, priv->port)) + port_state->link_state = MLX4_PORT_STATE_DEV_EVENT_PORT_DOWN; + + up = port_state->link_state == MLX4_PORT_STATE_DEV_EVENT_PORT_UP; + if (up == netif_carrier_ok(dev)) + netif_carrier_event(dev); + if (!up) { + en_info(priv, "Link Down\n"); + netif_carrier_off(dev); + } else { + en_info(priv, "Link Up\n"); + netif_carrier_on(dev); + } +} + +static void mlx4_en_linkstate_work(struct work_struct *work) { struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, linkstate_task); struct mlx4_en_dev *mdev = priv->mdev; - int linkstate = priv->link_state; mutex_lock(&mdev->state_lock); - /* If observable port state changed set carrier state and - * report to system log */ - if (priv->last_link_state != linkstate) { - if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) { - en_info(priv, "Link Down\n"); - netif_carrier_off(priv->dev); - } else { - en_info(priv, "Link Up\n"); - netif_carrier_on(priv->dev); - } - } - priv->last_link_state = linkstate; + mlx4_en_linkstate(priv); mutex_unlock(&mdev->state_lock); } @@ -2079,9 +2088,11 @@ static int mlx4_en_open(struct net_device *dev) mlx4_en_clear_stats(dev); err = mlx4_en_start_port(dev); - if (err) + if (err) { en_err(priv, "Failed starting port:%d\n", priv->port); - + goto out; + } + mlx4_en_linkstate(priv); out: mutex_unlock(&mdev->state_lock); return err; @@ -3168,7 +3179,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, spin_lock_init(&priv->stats_lock); INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode); INIT_WORK(&priv->restart_task, mlx4_en_restart); - INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); + INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate_work); INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task); #ifdef CONFIG_RFS_ACCEL diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index f3d1a20201ef..6bf558c5ec10 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -552,7 +552,6 @@ struct mlx4_en_priv { struct mlx4_hwq_resources res; int link_state; - int last_link_state; bool port_up; int port; int registered; -- cgit v1.2.3 From e30cd812dffadc58241ae378e48728e6a161becd Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 17 Sep 2021 15:53:56 -0600 Subject: selftests: net: af_unix: Fix makefile to use TEST_GEN_PROGS Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define executables. TEST_PROGS is for shell scripts that need to be installed and run by the common lib.mk framework. The common framework doesn't touch TEST_PROGS when it does build and clean. As a result "make kselftest-clean" and "make clean" fail to remove executables. Run and install work because the common framework runs and installs TEST_PROGS. Build works because the Makefile defines "all" rule which is unnecessary if TEST_GEN_PROGS is used. Use TEST_GEN_PROGS so the common framework can handle build/run/ install/clean properly. Signed-off-by: Shuah Khan Signed-off-by: David S. Miller --- tools/testing/selftests/net/af_unix/Makefile | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/tools/testing/selftests/net/af_unix/Makefile b/tools/testing/selftests/net/af_unix/Makefile index cfc7f4f97fd1..df341648f818 100644 --- a/tools/testing/selftests/net/af_unix/Makefile +++ b/tools/testing/selftests/net/af_unix/Makefile @@ -1,5 +1,2 @@ -##TEST_GEN_FILES := test_unix_oob -TEST_PROGS := test_unix_oob +TEST_GEN_PROGS := test_unix_oob include ../../lib.mk - -all: $(TEST_PROGS) -- cgit v1.2.3 From 27a221f433b7ac6604845b09696e60e803972d3c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 31 Aug 2021 11:18:02 +0300 Subject: iwlwifi: mvm: d3: Fix off by ones in iwl_mvm_wowlan_get_rsc_v5_data() These should be >= ARRAY_SIZE() instead of > ARRAY_SIZE() to prevent an out of bounds write on the next line. Fixes: 79e561f0f05a ("iwlwifi: mvm: d3: implement RSC command version 5") Signed-off-by: Dan Carpenter Acked-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210831081802.GA9846@kili --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 0e97d5e6c644..6e3a63a5a75c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -360,11 +360,11 @@ static void iwl_mvm_wowlan_get_rsc_v5_data(struct ieee80211_hw *hw, if (sta) { rsc = data->rsc->ucast_rsc; } else { - if (WARN_ON(data->gtks > ARRAY_SIZE(data->gtk_ids))) + if (WARN_ON(data->gtks >= ARRAY_SIZE(data->gtk_ids))) return; data->gtk_ids[data->gtks] = key->keyidx; rsc = data->rsc->mcast_rsc[data->gtks % 2]; - if (WARN_ON(key->keyidx > + if (WARN_ON(key->keyidx >= ARRAY_SIZE(data->rsc->mcast_key_id_map))) return; data->rsc->mcast_key_id_map[key->keyidx] = data->gtks % 2; -- cgit v1.2.3 From b6a46b4f6e4b35868e33930acaa7c50bf6cab821 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 31 Aug 2021 11:18:49 +0300 Subject: iwlwifi: mvm: d3: missing unlock in iwl_mvm_wowlan_program_keys() This code was refactored and the mutex_unlock(&mvm->mutex); was accidentally deleted. Fixes: af3aab9ce298 ("iwlwifi: mvm: d3: make key reprogramming iteration optional") Signed-off-by: Dan Carpenter Acked-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210831081849.GB9846@kili --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 6e3a63a5a75c..9f706fffb592 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -160,6 +160,7 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, mvm->ptk_icvlen = key->icv_len; mvm->gtk_ivlen = key->iv_len; mvm->gtk_icvlen = key->icv_len; + mutex_unlock(&mvm->mutex); /* don't upload key again */ return; -- cgit v1.2.3 From 4420a0dec79428eabe631269ba0408f79658e0d3 Mon Sep 17 00:00:00 2001 From: Amit Pundir Date: Fri, 17 Sep 2021 01:35:54 +0530 Subject: arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings Upstream commit 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") shuffled reserved memory regions in sdm845.dtsi to make firmware loading succeed and enable the ipa device on sdm845-yoga but it broke the other common users of those memory regions like Xiaomi Pocophone F1. So this patch effectively revert those upstream commit changes and move all the relevant changes to sdm850-lenovo-yoga-c630.dts instead. Fixes: 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") Signed-off-by: Amit Pundir Tested-by: Steev Klimaszewski Tested-by: Bjorn Andersson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 21 ++++++++----- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 34 ++++++++++++++++++++++ 2 files changed, 47 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 6d7172e6f4c3..b3b911926184 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -128,23 +128,28 @@ no-map; }; - wlan_msa_mem: memory@8c400000 { - reg = <0 0x8c400000 0 0x100000>; + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; no-map; }; - gpu_mem: memory@8c515000 { - reg = <0 0x8c515000 0 0x2000>; + ipa_gsi_mem: memory@8c410000 { + reg = <0 0x8c410000 0 0x5000>; no-map; }; - ipa_fw_mem: memory@8c517000 { - reg = <0 0x8c517000 0 0x5a000>; + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; no-map; }; - adsp_mem: memory@8c600000 { - reg = <0 0x8c600000 0 0x1a00000>; + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: memory@8df00000 { + reg = <0 0x8df00000 0 0x100000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 385e5029437d..2ba23aa582a1 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -16,6 +16,17 @@ #include "sdm850.dtsi" #include "pm8998.dtsi" +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; + / { model = "Lenovo Yoga C630"; compatible = "lenovo,yoga-c630", "qcom,sdm845"; @@ -58,6 +69,29 @@ }; }; + /* Reserved memory changes for IPA */ + reserved-memory { + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + gpu_mem: memory@8c515000 { + reg = <0 0x8c515000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c517000 { + reg = <0 0x8c517000 0 0x5a000>; + no-map; + }; + + adsp_mem: memory@8c600000 { + reg = <0 0x8c600000 0 0x1a00000>; + no-map; + }; + }; + sn65dsi86_refclk: sn65dsi86-refclk { compatible = "fixed-clock"; #clock-cells = <0>; -- cgit v1.2.3 From 833d51d7c66d6708abbc02398892b96b950167b9 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 28 Aug 2021 15:02:02 +0800 Subject: soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment PT_LOAD type denotes that the segment should be loaded into the final firmware memory region. Hash segment is not one such, because it's only needed for PAS init and shouldn't be in the final firmware memory region. That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and hash segment. This actually makes the hash segment type check in qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment, it won't be loaded into firmware memory region anyway, due to the QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD type for some reason (misusing or abusing?). Some firmware files on Sony phones are such examples, e.g WCNSS firmware of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD. Drop the unnecessary hash segment type check in qcom_mdt_read_metadata() to fix firmware loading failure on these phones, while hash segment is still kept away from the final firmware memory region. Fixes: 498b98e93900 ("soc: qcom: mdt_loader: Support loading non-split images") Signed-off-by: Shawn Guo Reviewed-by: Marijn Suijten Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org --- drivers/soc/qcom/mdt_loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c index bda170d7b4a2..72fc2b539213 100644 --- a/drivers/soc/qcom/mdt_loader.c +++ b/drivers/soc/qcom/mdt_loader.c @@ -98,7 +98,7 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len) if (ehdr->e_phnum < 2) return ERR_PTR(-EINVAL); - if (phdrs[0].p_type == PT_LOAD || phdrs[1].p_type == PT_LOAD) + if (phdrs[0].p_type == PT_LOAD) return ERR_PTR(-EINVAL); if ((phdrs[1].p_flags & QCOM_MDT_TYPE_MASK) != QCOM_MDT_TYPE_HASH) -- cgit v1.2.3 From 4382c73a12b4cab537176011a36a3c019cb2a04e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 24 Aug 2021 14:27:41 +0200 Subject: firmware: qcom_scm: QCOM_SCM should depend on ARCH_QCOM The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM. Until recently, QCOM_SCM was an invisible symbol, but this was changed by adding loadable module support, exposing it to all ARM and ARM64 users. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. While at it, drop the dependency on ARM || ARM64, as that is implied by HAVE_ARM_SMCCC. Fixes: b42000e4b8741bf6 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module") Fixes: 2954a6f12f250890 ("firmware: qcom-scm: Fix QCOM_SCM configuration") Signed-off-by: Geert Uytterhoeven Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be --- drivers/firmware/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 220a58cf0a44..0bebd5a62a9f 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -204,7 +204,7 @@ config INTEL_STRATIX10_RSU config QCOM_SCM tristate "Qcom SCM driver" - depends on ARM || ARM64 + depends on ARCH_QCOM || COMPILE_TEST depends on HAVE_ARM_SMCCC select RESET_CONTROLLER -- cgit v1.2.3 From b51593c4cd739dff7fc40bbed368572d98b19ae8 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 17 Sep 2021 09:13:23 -0400 Subject: init/do_mounts.c: Harden split_fs_names() against buffer overflow split_fs_names() currently takes comma separate list of filesystems and converts it into individual filesystem strings. Pleaces these strings in the input buffer passed by caller and returns number of strings. If caller manages to pass input string bigger than buffer, then we can write beyond the buffer. Or if string just fits buffer, we will still write beyond the buffer as we append a '\0' byte at the end. Pass size of input buffer to split_fs_names() and put enough checks in place so such buffer overrun possibilities do not occur. This patch does few things. - Add a parameter "size" to split_fs_names(). This specifies size of input buffer. - Use strlcpy() (instead of strcpy()) so that we can't go beyond buffer size. If input string "names" is larger than passed in buffer, input string will be truncated to fit in buffer. - Stop appending extra '\0' character at the end and avoid one possibility of going beyond the input buffer size. - Do not use extra loop to count number of strings. - Previously if one passed "rootfstype=foo,,bar", split_fs_names() will return only 1 string "foo" (and "bar" will be truncated due to extra ,). After this patch, now split_fs_names() will return 3 strings ("foo", zero-sized-string, and "bar"). Callers of split_fs_names() have been modified to check for zero sized string and skip to next one. Reported-by: xu xin Signed-off-by: Vivek Goyal Reviewed-by: Jan Kara Signed-off-by: Al Viro --- init/do_mounts.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 2ed30ff6c906..9207bde9ca3f 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -338,20 +338,19 @@ __setup("rootflags=", root_data_setup); __setup("rootfstype=", fs_names_setup); __setup("rootdelay=", root_delay_setup); -static int __init split_fs_names(char *page, char *names) +/* This can return zero length strings. Caller should check */ +static int __init split_fs_names(char *page, size_t size, char *names) { - int count = 0; + int count = 1; char *p = page; - strcpy(p, root_fs_names); + strlcpy(p, root_fs_names, size); while (*p++) { - if (p[-1] == ',') + if (p[-1] == ',') { p[-1] = '\0'; + count++; + } } - *p = '\0'; - - for (p = page; *p; p += strlen(p)+1) - count++; return count; } @@ -404,12 +403,16 @@ void __init mount_block_root(char *name, int flags) scnprintf(b, BDEVNAME_SIZE, "unknown-block(%u,%u)", MAJOR(ROOT_DEV), MINOR(ROOT_DEV)); if (root_fs_names) - num_fs = split_fs_names(fs_names, root_fs_names); + num_fs = split_fs_names(fs_names, PAGE_SIZE, root_fs_names); else num_fs = list_bdev_fs_names(fs_names, PAGE_SIZE); retry: for (i = 0, p = fs_names; i < num_fs; i++, p += strlen(p)+1) { - int err = do_mount_root(name, p, flags, root_mount_data); + int err; + + if (!*p) + continue; + err = do_mount_root(name, p, flags, root_mount_data); switch (err) { case 0: goto out; @@ -543,10 +546,12 @@ static int __init mount_nodev_root(void) fs_names = (void *)__get_free_page(GFP_KERNEL); if (!fs_names) return -EINVAL; - num_fs = split_fs_names(fs_names, root_fs_names); + num_fs = split_fs_names(fs_names, PAGE_SIZE, root_fs_names); for (i = 0, fstype = fs_names; i < num_fs; i++, fstype += strlen(fstype) + 1) { + if (!*fstype) + continue; if (!fs_is_nodev(fstype)) continue; err = do_mount_root(root_device_name, fstype, root_mountflags, -- cgit v1.2.3 From 40c8ee67cfc49d00a13ccbf542e307b6b5421ad3 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 14 Sep 2021 12:12:10 +0300 Subject: init: don't panic if mount_nodev_root failed Attempt to mount 9p file system as root gives the following kernel panic: 9pnet_virtio: no channels available for device root Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc1+ #127 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x59 panic+0x1e2/0x44b ? __warn_printk+0xf3/0xf3 ? free_unref_page+0x2d4/0x4a0 ? trace_hardirqs_on+0x32/0x120 ? free_unref_page+0x2d4/0x4a0 mount_root+0x189/0x1e0 prepare_namespace+0x136/0x165 kernel_init_freeable+0x3b8/0x3cb ? rest_init+0x2e0/0x2e0 kernel_init+0x19/0x130 ret_from_fork+0x1f/0x30 Kernel Offset: disabled ---[ end Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 ]--- QEMU command line: "qemu-system-x86_64 -append root=/dev/root rw rootfstype=9p rootflags=trans=virtio ..." This error is because root_device_name is truncated in prepare_namespace() from being "/dev/root" to be "root" prior to call to mount_nodev_root(). As a solution, don't treat errors in mount_nodev_root() as errors that require panics and allow failback to the mount flow that existed before patch citied in Fixes tag. Fixes: f9259be6a9e7 ("init: allow mounting arbitrary non-blockdevice filesystems as root") Signed-off-by: Leon Romanovsky Reviewed-by: Christoph Hellwig Signed-off-by: Al Viro --- init/do_mounts.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 9207bde9ca3f..762b534978d9 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -558,9 +558,6 @@ static int __init mount_nodev_root(void) root_mount_data); if (!err) break; - if (err != -EACCES && err != -EINVAL) - panic("VFS: Unable to mount root \"%s\" (%s), err=%d\n", - root_device_name, fstype, err); } free_page((unsigned long)fs_names); -- cgit v1.2.3 From ecf5b34cd5182180ff47ca14ecaca0a90db7fd1d Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Sun, 29 Aug 2021 15:39:17 +0200 Subject: ARM: dts: qcom: apq8064: update Adreno clock names The legacy clock names (including the _clk suffix) was dropped from the driver, so update the dts accordingly). Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg [bjorn: Updated commit message] Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz --- arch/arm/boot/dts/qcom-apq8064.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ea02134e6f6d..d1c1c6aab2b8 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1154,10 +1154,10 @@ interrupts = ; interrupt-names = "kgsl_3d0_irq"; clock-names = - "core_clk", - "iface_clk", - "mem_clk", - "mem_iface_clk"; + "core", + "iface", + "mem", + "mem_iface"; clocks = <&mmcc GFX3D_CLK>, <&mmcc GFX3D_AHB_CLK>, -- cgit v1.2.3 From 0a91cacee897eb83cf9539bd739f98899e31af85 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 11 Aug 2021 15:41:41 -0700 Subject: arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI This should be the dai for display port. Without this set properly we fail to get audio routed through external displays on trogdor. It looks like we picked up v4[1] of this patch when there was a v7[2]. The v7 patch still had the wrong sound-dai but at least we can fix all this up and audio works. Cc: Srinivasa Rao Mandadapu Cc: Srinivas Kandagatla Cc: Douglas Anderson Fixes: b22d313e1772 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI") Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1] Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2] Signed-off-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org --- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 0f2b3c00e434..70c88c37de32 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -273,7 +273,6 @@ "Headphone Jack", "HPOL", "Headphone Jack", "HPOR"; - #sound-dai-cells = <0>; #address-cells = <1>; #size-cells = <0>; @@ -301,11 +300,11 @@ }; }; - dai-link@2 { + dai-link@5 { link-name = "MultiMedia2"; - reg = <2>; + reg = ; cpu { - sound-dai = <&lpass_cpu 2>; + sound-dai = <&lpass_cpu LPASS_DP_RX>; }; codec { @@ -782,7 +781,7 @@ hp_i2c: &i2c9 { qcom,playback-sd-lines = <0>; }; - hdmi-primary@0 { + hdmi@5 { reg = ; }; }; -- cgit v1.2.3 From 3765996e4f0b8a755cab215a08df744490c76052 Mon Sep 17 00:00:00 2001 From: Xuan Zhuo Date: Sat, 18 Sep 2021 16:52:32 +0800 Subject: napi: fix race inside napi_enable The process will cause napi.state to contain NAPI_STATE_SCHED and not in the poll_list, which will cause napi_disable() to get stuck. The prefix "NAPI_STATE_" is removed in the figure below, and NAPI_STATE_HASHED is ignored in napi.state. CPU0 | CPU1 | napi.state =============================================================================== napi_disable() | | SCHED | NPSVC napi_enable() | | { | | smp_mb__before_atomic(); | | clear_bit(SCHED, &n->state); | | NPSVC | napi_schedule_prep() | SCHED | NPSVC | napi_poll() | | napi_complete_done() | | { | | if (n->state & (NPSVC | | (1) | _BUSY_POLL))) | | return false; | | ................ | | } | SCHED | NPSVC | | clear_bit(NPSVC, &n->state); | | SCHED } | | | | napi_schedule_prep() | | SCHED | MISSED (2) (1) Here return direct. Because of NAPI_STATE_NPSVC exists. (2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list Since NAPI_STATE_SCHED already exists and napi is not in the sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always exist. 1. This will cause this queue to no longer receive packets. 2. If you encounter napi_disable under the protection of rtnl_lock, it will cause the entire rtnl_lock to be locked, affecting the overall system. This patch uses cmpxchg to implement napi_enable(), which ensures that there will be no race due to the separation of clear two bits. Fixes: 2d8bff12699abc ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Xuan Zhuo Reviewed-by: Dust Li Signed-off-by: David S. Miller --- net/core/dev.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 74fd402d26dd..7ee9fecd3aff 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6923,12 +6923,16 @@ EXPORT_SYMBOL(napi_disable); */ void napi_enable(struct napi_struct *n) { - BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); - smp_mb__before_atomic(); - clear_bit(NAPI_STATE_SCHED, &n->state); - clear_bit(NAPI_STATE_NPSVC, &n->state); - if (n->dev->threaded && n->thread) - set_bit(NAPI_STATE_THREADED, &n->state); + unsigned long val, new; + + do { + val = READ_ONCE(n->state); + BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); + + new = val & ~(NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC); + if (n->dev->threaded && n->thread) + new |= NAPIF_STATE_THREADED; + } while (cmpxchg(&n->state, val, new) != val); } EXPORT_SYMBOL(napi_enable); -- cgit v1.2.3 From 563f23b002534176f49524b5ca0e1d94d8906c40 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 17 Sep 2021 16:02:18 +0300 Subject: nexthop: Fix division by zero while replacing a resilient group The resilient nexthop group torture tests in fib_nexthop.sh exposed a possible division by zero while replacing a resilient group [1]. The division by zero occurs when the data path sees a resilient nexthop group with zero buckets. The tests replace a resilient nexthop group in a loop while traffic is forwarded through it. The tests do not specify the number of buckets while performing the replacement, resulting in the kernel allocating a stub resilient table (i.e, 'struct nh_res_table') with zero buckets. This table should never be visible to the data path, but the old nexthop group (i.e., 'oldg') might still be used by the data path when the stub table is assigned to it. Fix this by only assigning the stub table to the old nexthop group after making sure the group is no longer used by the data path. Tested with fib_nexthops.sh: Tests passed: 222 Tests failed: 0 [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:nexthop_select_path+0x2d2/0x1a80 [...] Call Trace: fib_select_multipath+0x79b/0x1530 fib_select_path+0x8fb/0x1c10 ip_route_output_key_hash_rcu+0x1198/0x2da0 ip_route_output_key_hash+0x190/0x340 ip_route_output_flow+0x21/0x120 raw_sendmsg+0x91d/0x2e10 inet_sendmsg+0x9e/0xe0 __sys_sendto+0x23d/0x360 __x64_sys_sendto+0xe1/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: stable@vger.kernel.org Fixes: 283a72a5599e ("nexthop: Add implementation of resilient next-hop groups") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/nexthop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 75ca4b6e484f..0e75fd3e57b4 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -1982,6 +1982,8 @@ static int replace_nexthop_grp(struct net *net, struct nexthop *old, rcu_assign_pointer(old->nh_grp, newg); if (newg->resilient) { + /* Make sure concurrent readers are not using 'oldg' anymore. */ + synchronize_net(); rcu_assign_pointer(oldg->res_table, tmp_table); rcu_assign_pointer(oldg->spare->res_table, tmp_table); } -- cgit v1.2.3 From 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 20 Sep 2021 02:51:52 -0400 Subject: bnxt_en: Fix TX timeout when TX ring size is set to the smallest The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++---- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +++++ drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 037767b370d5..62f84cc91e4d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -391,7 +391,7 @@ static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp, * netif_tx_queue_stopped(). */ smp_mb(); - if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) { + if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) { netif_tx_wake_queue(txq); return false; } @@ -764,7 +764,7 @@ next_tx_int: smp_mb(); if (unlikely(netif_tx_queue_stopped(txq)) && - bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh && + bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh && READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING) netif_tx_wake_queue(txq); } @@ -2416,7 +2416,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) { tx_pkts++; /* return full budget so NAPI will complete. */ - if (unlikely(tx_pkts > bp->tx_wake_thresh)) { + if (unlikely(tx_pkts >= bp->tx_wake_thresh)) { rx_pkts = budget; raw_cons = NEXT_RAW_CMP(raw_cons); if (budget) @@ -3640,7 +3640,7 @@ static int bnxt_init_tx_rings(struct bnxt *bp) u16 i; bp->tx_wake_thresh = max_t(int, bp->tx_ring_size / 2, - MAX_SKB_FRAGS + 1); + BNXT_MIN_TX_DESC_CNT); for (i = 0; i < bp->tx_nr_rings; i++) { struct bnxt_tx_ring_info *txr = &bp->tx_ring[i]; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index ec046e7a2484..19fe6478e9b4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -629,6 +629,11 @@ struct nqe_cn { #define BNXT_MAX_RX_JUM_DESC_CNT (RX_DESC_CNT * MAX_RX_AGG_PAGES - 1) #define BNXT_MAX_TX_DESC_CNT (TX_DESC_CNT * MAX_TX_PAGES - 1) +/* Minimum TX BDs for a TX packet with MAX_SKB_FRAGS + 1. We need one extra + * BD because the first TX BD is always a long BD. + */ +#define BNXT_MIN_TX_DESC_CNT (MAX_SKB_FRAGS + 2) + #define RX_RING(x) (((x) & ~(RX_DESC_CNT - 1)) >> (BNXT_PAGE_SHIFT - 4)) #define RX_IDX(x) ((x) & (RX_DESC_CNT - 1)) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index b056e3c29bbd..7260910e75fb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -798,7 +798,7 @@ static int bnxt_set_ringparam(struct net_device *dev, if ((ering->rx_pending > BNXT_MAX_RX_DESC_CNT) || (ering->tx_pending > BNXT_MAX_TX_DESC_CNT) || - (ering->tx_pending <= MAX_SKB_FRAGS)) + (ering->tx_pending < BNXT_MIN_TX_DESC_CNT)) return -EINVAL; if (netif_running(dev)) -- cgit v1.2.3 From 211f323768a25b30c106fd38f15a0f62c7c2b5f4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:47 +0200 Subject: USB: serial: mos7840: remove duplicated 0xac24 device ID 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7840.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d7fe33ca73e4..925067a7978d 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -107,7 +107,6 @@ #define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02 #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03 -#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* Interrupt Routine Defines */ @@ -186,7 +185,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P) }, { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4) }, { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P) }, - { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4) }, {} /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.3 From 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:48 +0200 Subject: USB: serial: option: remove duplicate USB device ID The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a79f51e35115..02a35f26ee82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1658,7 +1658,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), -- cgit v1.2.3 From 42a99a0be307562c1bfef32bad8f89aa3c428edd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:57:49 +0200 Subject: ptp: ocp: add COMMON_CLK dependency Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/ptp/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index f02bedf41264..458218f88c5e 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -174,6 +174,7 @@ config PTP_1588_CLOCK_OCP depends on I2C && MTD depends on SERIAL_8250 depends on !S390 + depends on COMMON_CLK select NET_DEVLINK help This driver adds support for an OpenCompute time card. -- cgit v1.2.3 From aa3233ea7bdb6c4004f5032a3a07417ea51dc409 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:55:09 +0200 Subject: staging: r8188eu: fix -Wrestrict warnings Adding back the nonstandard ioctl commands caused -Wrestrict warnings when building with 'make W=1': drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_read_rf': drivers/staging/r8188eu/os_dep/ioctl_linux.c:5515:27: error: 'sprintf' argument 3 overlaps destination object 'extra' [-Werror=restrict] 5515 | sprintf(extra, "%s %d", extra, strtou); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/r8188eu/os_dep/ioctl_linux.c:5470:54: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 5470 | struct iw_point *wrqu, char *extra) | ~~~~~~^~~~~ Change these to the same construct used elsewhere in that driver, with an offset to the string to make the warning go away. The ioctl commands were previously removed, and it's unlikely that anything is actually using them, so ideally I would prefer to have them removed again. The lack of range checking of the 'extra' output buffer is also slightly worrying, but I did not check whether this could cause harm. Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210920095525.1150678-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/r8188eu/os_dep/ioctl_linux.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c index 81d4255d1785..1fd375076001 100644 --- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c +++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c @@ -5372,8 +5372,8 @@ static int rtw_mp_read_reg(struct net_device *dev, pnext++; if (*pnext != '\0') { - strtout = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtout); + strtout = simple_strtoul(pnext, &ptmp, 16); + sprintf(extra + strlen(extra), " %d", strtout); } else { break; } @@ -5405,7 +5405,7 @@ static int rtw_mp_read_reg(struct net_device *dev, pnext++; if (*pnext != '\0') { strtout = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtout); + sprintf(extra + strlen(extra), " %d", strtout); } else { break; } @@ -5512,7 +5512,7 @@ static int rtw_mp_read_rf(struct net_device *dev, pnext++; if (*pnext != '\0') { strtou = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtou); + sprintf(extra + strlen(extra), " %d", strtou); } else { break; } -- cgit v1.2.3 From c90521a0e94f00a2e40889b7d7d99f1494fa9381 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 16 Aug 2021 15:16:09 +0100 Subject: firmware: arm_scmi: Fix virtio transport Kconfig dependency ARM_SCMI_TRANSPORT_VIRTIO is a 'bool' Kconfig used to include support for the SCMI virtio transport inside the core SCMI stack; a bare transport dependency attached here to this option, though, cannot be properly propagated to the parent ARM_SCMI_PROTOCOL option and, as a result, it is currently possible to configure a Kernel where SCMI core is builtin and includes support for virtio while VirtIO core is =m. This allowed combination breaks linking: ARM_SCMI_PROTOCOL=y ARM_SCMI_TRANSPORT_VIRTIO=y VIRTIO=m Bind the dependency in ARM_SCMI_TRANSPORT_VIRTIO to the chosen kind of compilation of ARM_SCMI_PROTOCOL. Link: https://lore.kernel.org/r/20210816141609.41751-1-cristian.marussi@arm.com Fixes: 46abe13b5e3d ("firmware: arm_scmi: Add virtio transport") Reported-by: kernel test robot Suggested-by: Arnd Bergmann Acked-by: Arnd Bergmann Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig index 7f4d2435503b..3d7081e84853 100644 --- a/drivers/firmware/arm_scmi/Kconfig +++ b/drivers/firmware/arm_scmi/Kconfig @@ -68,7 +68,7 @@ config ARM_SCMI_TRANSPORT_SMC config ARM_SCMI_TRANSPORT_VIRTIO bool "SCMI transport based on VirtIO" - depends on VIRTIO + depends on VIRTIO=y || VIRTIO=ARM_SCMI_PROTOCOL select ARM_SCMI_HAVE_TRANSPORT select ARM_SCMI_HAVE_MSG help -- cgit v1.2.3 From 1cd73200dad2d53d839b3323596dbf8a2b949d86 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 12:02:52 +0200 Subject: firmware: arm_scmi: Remove __exit annotation virtio_scmi_exit() is only called from __exit function, so the annotation is correct, but when the driver is built-in, the section gets discarded and the reference from a callback pointer causes a link-time error: `virtio_scmi_exit' referenced in section `.rodata' of drivers/firmware/arm_scmi/virtio.o: defined in discarded section `.exit.text' of drivers/firmware/arm_scmi/virtio.o I could not figure out a better workaround, so let's just remove that annotation even if it wastes a couple of bytes in .text. Link: https://lore.kernel.org/r/20210920100301.1466486-2-arnd@kernel.org Fixes: 46abe13b5e3d ("firmware: arm_scmi: Add virtio transport") Signed-off-by: Arnd Bergmann Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c index 224577f86928..8941bb40f2df 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/virtio.c @@ -476,7 +476,7 @@ static int __init virtio_scmi_init(void) return register_virtio_driver(&virtio_scmi_driver); } -static void __exit virtio_scmi_exit(void) +static void virtio_scmi_exit(void) { unregister_virtio_driver(&virtio_scmi_driver); } -- cgit v1.2.3 From a49b50a3c1c3226d26e1dd11e8b763f27e477623 Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Tue, 7 Sep 2021 13:21:37 +0800 Subject: KVM: arm64: nvhe: Fix missing FORCE for hyp-reloc.S build rule Add FORCE so that if_changed can detect the command line change. We'll otherwise see a compilation warning since commit e1f86d7b4b2a ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk"). arch/arm64/kvm/hyp/nvhe/Makefile:58: FORCE prerequisite is missing Cc: David Brazdil Cc: Masahiro Yamada Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210907052137.1059-1-yuzenghui@huawei.com --- arch/arm64/kvm/hyp/nvhe/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile index 5df6193fc430..8d741f71377f 100644 --- a/arch/arm64/kvm/hyp/nvhe/Makefile +++ b/arch/arm64/kvm/hyp/nvhe/Makefile @@ -54,7 +54,7 @@ $(obj)/kvm_nvhe.tmp.o: $(obj)/hyp.lds $(addprefix $(obj)/,$(hyp-obj)) FORCE # runtime. Because the hypervisor is part of the kernel binary, relocations # produce a kernel VA. We enumerate relocations targeting hyp at build time # and convert the kernel VAs at those positions to hyp VAs. -$(obj)/hyp-reloc.S: $(obj)/kvm_nvhe.tmp.o $(obj)/gen-hyprel +$(obj)/hyp-reloc.S: $(obj)/kvm_nvhe.tmp.o $(obj)/gen-hyprel FORCE $(call if_changed,hyprel) # 5) Compile hyp-reloc.S and link it into the existing partially linked object. -- cgit v1.2.3 From e840f42a49925707fca90e6c7a4095118fdb8c4d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 19 Sep 2021 14:09:49 +0100 Subject: KVM: arm64: Fix PMU probe ordering Russell reported that since 5.13, KVM's probing of the PMU has started to fail on his HW. As it turns out, there is an implicit ordering dependency between the architectural PMU probing code and and KVM's own probing. If, due to probe ordering reasons, KVM probes before the PMU driver, it will fail to detect the PMU and prevent it from being advertised to guests as well as the VMM. Obviously, this is one probing too many, and we should be able to deal with any ordering. Add a callback from the PMU code into KVM to advertise the registration of a host CPU PMU, allowing for any probing order. Fixes: 5421db1be3b1 ("KVM: arm64: Divorce the perf code from oprofile helpers") Reported-by: "Russell King (Oracle)" Tested-by: Russell King (Oracle) Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk Cc: stable@vger.kernel.org --- arch/arm64/kvm/perf.c | 3 --- arch/arm64/kvm/pmu-emul.c | 9 ++++++++- drivers/perf/arm_pmu.c | 2 ++ include/kvm/arm_pmu.h | 3 --- include/linux/perf/arm_pmu.h | 6 ++++++ 5 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm64/kvm/perf.c b/arch/arm64/kvm/perf.c index f9bb3b14130e..c84fe24b2ea1 100644 --- a/arch/arm64/kvm/perf.c +++ b/arch/arm64/kvm/perf.c @@ -50,9 +50,6 @@ static struct perf_guest_info_callbacks kvm_guest_cbs = { int kvm_perf_init(void) { - if (kvm_pmu_probe_pmuver() != ID_AA64DFR0_PMUVER_IMP_DEF && !is_protected_kvm_enabled()) - static_branch_enable(&kvm_arm_pmu_available); - return perf_register_guest_info_callbacks(&kvm_guest_cbs); } diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index f5065f23b413..2af3c37445e0 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -740,7 +740,14 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data, kvm_pmu_create_perf_event(vcpu, select_idx); } -int kvm_pmu_probe_pmuver(void) +void kvm_host_pmu_init(struct arm_pmu *pmu) +{ + if (pmu->pmuver != 0 && pmu->pmuver != ID_AA64DFR0_PMUVER_IMP_DEF && + !kvm_arm_support_pmu_v3() && !is_protected_kvm_enabled()) + static_branch_enable(&kvm_arm_pmu_available); +} + +static int kvm_pmu_probe_pmuver(void) { struct perf_event_attr attr = { }; struct perf_event *event; diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index 3cbc3baf087f..295cc7952d0e 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -952,6 +952,8 @@ int armpmu_register(struct arm_pmu *pmu) pmu->name, pmu->num_events, has_nmi ? ", using NMIs" : ""); + kvm_host_pmu_init(pmu); + return 0; out_destroy: diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h index 864b9997efb2..90f21898aad8 100644 --- a/include/kvm/arm_pmu.h +++ b/include/kvm/arm_pmu.h @@ -61,7 +61,6 @@ int kvm_arm_pmu_v3_get_attr(struct kvm_vcpu *vcpu, int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu); -int kvm_pmu_probe_pmuver(void); #else struct kvm_pmu { }; @@ -118,8 +117,6 @@ static inline u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1) return 0; } -static inline int kvm_pmu_probe_pmuver(void) { return 0xf; } - #endif #endif diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h index 505480217cf1..2512e2f9cd4e 100644 --- a/include/linux/perf/arm_pmu.h +++ b/include/linux/perf/arm_pmu.h @@ -163,6 +163,12 @@ int arm_pmu_acpi_probe(armpmu_init_fn init_fn); static inline int arm_pmu_acpi_probe(armpmu_init_fn init_fn) { return 0; } #endif +#ifdef CONFIG_KVM +void kvm_host_pmu_init(struct arm_pmu *pmu); +#else +#define kvm_host_pmu_init(x) do { } while(0) +#endif + /* Internal functions only for core arm_pmu code */ struct arm_pmu *armpmu_alloc(void); struct arm_pmu *armpmu_alloc_atomic(void); -- cgit v1.2.3 From e184cec5e29d8eb3c3435b12a9074b75e2d69e4a Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 15 Sep 2021 21:52:06 +0800 Subject: net: hns3: fix change RSS 'hfunc' ineffective issue When user change rss 'hfunc' without set rss 'hkey' by ethtool -X command, the driver will ignore the 'hfunc' for the hkey is NULL. It's unreasonable. So fix it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 45 ++++++++++++------- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 52 ++++++++++++++-------- 2 files changed, 64 insertions(+), 33 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index f1e46ba799f9..36c8741445e8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -4741,6 +4741,24 @@ static int hclge_get_rss(struct hnae3_handle *handle, u32 *indir, return 0; } +static int hclge_parse_rss_hfunc(struct hclge_vport *vport, const u8 hfunc, + u8 *hash_algo) +{ + switch (hfunc) { + case ETH_RSS_HASH_TOP: + *hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ; + return 0; + case ETH_RSS_HASH_XOR: + *hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE; + return 0; + case ETH_RSS_HASH_NO_CHANGE: + *hash_algo = vport->rss_algo; + return 0; + default: + return -EINVAL; + } +} + static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir, const u8 *key, const u8 hfunc) { @@ -4750,30 +4768,27 @@ static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir, u8 hash_algo; int ret, i; + ret = hclge_parse_rss_hfunc(vport, hfunc, &hash_algo); + if (ret) { + dev_err(&hdev->pdev->dev, "invalid hfunc type %u\n", hfunc); + return ret; + } + /* Set the RSS Hash Key if specififed by the user */ if (key) { - switch (hfunc) { - case ETH_RSS_HASH_TOP: - hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ; - break; - case ETH_RSS_HASH_XOR: - hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE; - break; - case ETH_RSS_HASH_NO_CHANGE: - hash_algo = vport->rss_algo; - break; - default: - return -EINVAL; - } - ret = hclge_set_rss_algo_key(hdev, hash_algo, key); if (ret) return ret; /* Update the shadow RSS key with user specified qids */ memcpy(vport->rss_hash_key, key, HCLGE_RSS_KEY_SIZE); - vport->rss_algo = hash_algo; + } else { + ret = hclge_set_rss_algo_key(hdev, hash_algo, + vport->rss_hash_key); + if (ret) + return ret; } + vport->rss_algo = hash_algo; /* Update the shadow RSS table with user specified qids */ for (i = 0; i < ae_dev->dev_specs.rss_ind_tbl_size; i++) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index a69e892277b3..5fdac8685f95 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -816,40 +816,56 @@ static int hclgevf_get_rss(struct hnae3_handle *handle, u32 *indir, u8 *key, return 0; } +static int hclgevf_parse_rss_hfunc(struct hclgevf_dev *hdev, const u8 hfunc, + u8 *hash_algo) +{ + switch (hfunc) { + case ETH_RSS_HASH_TOP: + *hash_algo = HCLGEVF_RSS_HASH_ALGO_TOEPLITZ; + return 0; + case ETH_RSS_HASH_XOR: + *hash_algo = HCLGEVF_RSS_HASH_ALGO_SIMPLE; + return 0; + case ETH_RSS_HASH_NO_CHANGE: + *hash_algo = hdev->rss_cfg.hash_algo; + return 0; + default: + return -EINVAL; + } +} + static int hclgevf_set_rss(struct hnae3_handle *handle, const u32 *indir, const u8 *key, const u8 hfunc) { struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle); struct hclgevf_rss_cfg *rss_cfg = &hdev->rss_cfg; + u8 hash_algo; int ret, i; if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V2) { + ret = hclgevf_parse_rss_hfunc(hdev, hfunc, &hash_algo); + if (ret) + return ret; + /* Set the RSS Hash Key if specififed by the user */ if (key) { - switch (hfunc) { - case ETH_RSS_HASH_TOP: - rss_cfg->hash_algo = - HCLGEVF_RSS_HASH_ALGO_TOEPLITZ; - break; - case ETH_RSS_HASH_XOR: - rss_cfg->hash_algo = - HCLGEVF_RSS_HASH_ALGO_SIMPLE; - break; - case ETH_RSS_HASH_NO_CHANGE: - break; - default: - return -EINVAL; - } - - ret = hclgevf_set_rss_algo_key(hdev, rss_cfg->hash_algo, - key); - if (ret) + ret = hclgevf_set_rss_algo_key(hdev, hash_algo, key); + if (ret) { + dev_err(&hdev->pdev->dev, + "invalid hfunc type %u\n", hfunc); return ret; + } /* Update the shadow RSS key with user specified qids */ memcpy(rss_cfg->rss_hash_key, key, HCLGEVF_RSS_KEY_SIZE); + } else { + ret = hclgevf_set_rss_algo_key(hdev, hash_algo, + rss_cfg->rss_hash_key); + if (ret) + return ret; } + rss_cfg->hash_algo = hash_algo; } /* update the shadow RSS table with user specified qids */ -- cgit v1.2.3 From 91bc0d5272d3a4dc3d4fd2a74387c7e7361bbe96 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 15 Sep 2021 21:52:07 +0800 Subject: net: hns3: fix inconsistent vf id print The vf id from ethtool is added 1 before configured to driver. So it's necessary to minus 1 when printing it, in order to keep consistent with user's configuration. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 36c8741445e8..c0f25ea043b0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -6642,10 +6642,13 @@ static int hclge_fd_parse_ring_cookie(struct hclge_dev *hdev, u64 ring_cookie, u8 vf = ethtool_get_flow_spec_ring_vf(ring_cookie); u16 tqps; + /* To keep consistent with user's configuration, minus 1 when + * printing 'vf', because vf id from ethtool is added 1 for vf. + */ if (vf > hdev->num_req_vfs) { dev_err(&hdev->pdev->dev, - "Error: vf id (%u) > max vf num (%u)\n", - vf, hdev->num_req_vfs); + "Error: vf id (%u) should be less than %u\n", + vf - 1, hdev->num_req_vfs); return -EINVAL; } -- cgit v1.2.3 From 311c0aaa9b4bb8dc65f22634e15963316b17c921 Mon Sep 17 00:00:00 2001 From: Jiaran Zhang Date: Wed, 15 Sep 2021 21:52:08 +0800 Subject: net: hns3: fix misuse vf id and vport id in some logs vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs. So the actual vf id is equal to vport_id minus 1. Some VF print logs are actually vport, and logs of vf id actually use vport id, so this patch fixes them. Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error") Fixes: adcf738b804b ("net: hns3: cleanup some print format warning") Signed-off-by: Jiaran Zhang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 8 ++++---- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 10 ++++++---- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c index 718c16d686fa..bb9b026ae88e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c @@ -2445,12 +2445,12 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev, return; } - dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vf_id(%u), queue_id(%u)\n", + dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vport(%u), queue_id(%u)\n", vf_id, q_id); if (vf_id) { if (vf_id >= hdev->num_alloc_vport) { - dev_err(dev, "invalid vf id(%u)\n", vf_id); + dev_err(dev, "invalid vport(%u)\n", vf_id); return; } @@ -2463,8 +2463,8 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev, ret = hclge_inform_reset_assert_to_vf(&hdev->vport[vf_id]); if (ret) - dev_err(dev, "inform reset to vf(%u) failed %d!\n", - hdev->vport->vport_id, ret); + dev_err(dev, "inform reset to vport(%u) failed %d!\n", + vf_id, ret); } else { set_bit(HNAE3_FUNC_RESET, reset_requests); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c0f25ea043b0..afc88a41a89c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3661,7 +3661,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset) if (ret) { dev_err(&hdev->pdev->dev, "set vf(%u) rst failed %d!\n", - vport->vport_id, ret); + vport->vport_id - HCLGE_VF_VPORT_START_NUM, + ret); return ret; } @@ -3676,7 +3677,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset) if (ret) dev_warn(&hdev->pdev->dev, "inform reset to vf(%u) failed %d!\n", - vport->vport_id, ret); + vport->vport_id - HCLGE_VF_VPORT_START_NUM, + ret); } return 0; @@ -11467,11 +11469,11 @@ static void hclge_clear_resetting_state(struct hclge_dev *hdev) struct hclge_vport *vport = &hdev->vport[i]; int ret; - /* Send cmd to clear VF's FUNC_RST_ING */ + /* Send cmd to clear vport's FUNC_RST_ING */ ret = hclge_set_vf_rst(hdev, vport->vport_id, false); if (ret) dev_warn(&hdev->pdev->dev, - "clear vf(%u) rst failed %d!\n", + "clear vport(%u) rst failed %d!\n", vport->vport_id, ret); } } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index 2ce5302c5956..07aa6ada4fdb 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -566,7 +566,7 @@ static int hclge_reset_vf(struct hclge_vport *vport) struct hclge_dev *hdev = vport->back; dev_warn(&hdev->pdev->dev, "PF received VF reset request from VF %u!", - vport->vport_id); + vport->vport_id - HCLGE_VF_VPORT_START_NUM); return hclge_func_reset_cmd(hdev, vport->vport_id); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 78d5bf1ea561..44618cc4cca1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -581,7 +581,7 @@ int hclge_tm_qs_shaper_cfg(struct hclge_vport *vport, int max_tx_rate) ret = hclge_cmd_send(&hdev->hw, &desc, 1); if (ret) { dev_err(&hdev->pdev->dev, - "vf%u, qs%u failed to set tx_rate:%d, ret=%d\n", + "vport%u, qs%u failed to set tx_rate:%d, ret=%d\n", vport->vport_id, shap_cfg_cmd->qs_id, max_tx_rate, ret); return ret; -- cgit v1.2.3 From 63b1279d9905100a14da9e043de7b28e99dba3f8 Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Wed, 15 Sep 2021 21:52:09 +0800 Subject: net: hns3: check queue id range before using The input parameters may not be reliable. Before using the queue id, we should check this parameter. Otherwise, memory overwriting may occur. Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index 07aa6ada4fdb..65d78ee4d65a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -590,9 +590,17 @@ static void hclge_get_queue_id_in_pf(struct hclge_vport *vport, struct hclge_mbx_vf_to_pf_cmd *mbx_req, struct hclge_respond_to_vf_msg *resp_msg) { + struct hnae3_handle *handle = &vport->nic; + struct hclge_dev *hdev = vport->back; u16 queue_id, qid_in_pf; memcpy(&queue_id, mbx_req->msg.data, sizeof(queue_id)); + if (queue_id >= handle->kinfo.num_tqps) { + dev_err(&hdev->pdev->dev, "Invalid queue id(%u) from VF %u\n", + queue_id, mbx_req->mbx_src_vfid); + return; + } + qid_in_pf = hclge_covert_handle_qid_global(&vport->nic, queue_id); memcpy(resp_msg->data, &qid_in_pf, sizeof(qid_in_pf)); resp_msg->len = sizeof(qid_in_pf); -- cgit v1.2.3 From ef39d632608e66f428c1246836fd060cf4818d67 Mon Sep 17 00:00:00 2001 From: liaoguojia Date: Wed, 15 Sep 2021 21:52:10 +0800 Subject: net: hns3: check vlan id before using it The input parameters may not be reliable, so check the vlan id before using it, otherwise may set wrong vlan id into hardware. Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls") Signed-off-by: liaoguojia Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index afc88a41a89c..14e9daf09f8c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -9817,6 +9817,9 @@ static int hclge_set_vlan_filter_hw(struct hclge_dev *hdev, __be16 proto, if (is_kill && !vlan_id) return 0; + if (vlan_id >= VLAN_N_VID) + return -EINVAL; + ret = hclge_set_vf_vlan_common(hdev, vport_id, is_kill, vlan_id); if (ret) { dev_err(&hdev->pdev->dev, -- cgit v1.2.3 From 5126b9d3d4acdebc12b9d436282f88d8a1b5146c Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Wed, 15 Sep 2021 21:52:11 +0800 Subject: net: hns3: fix a return value error in hclge_get_reset_status() hclge_get_reset_status() should return the tqp reset status. However, if the CMDQ fails, the caller will take it as tqp reset success status by mistake. Therefore, uses a parameters to get the tqp reset status instead. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 14e9daf09f8c..47fea8985861 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10726,7 +10726,8 @@ static int hclge_reset_tqp_cmd_send(struct hclge_dev *hdev, u16 queue_id, return 0; } -static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id) +static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id, + u8 *reset_status) { struct hclge_reset_tqp_queue_cmd *req; struct hclge_desc desc; @@ -10744,7 +10745,9 @@ static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id) return ret; } - return hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B); + *reset_status = hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B); + + return 0; } u16 hclge_covert_handle_qid_global(struct hnae3_handle *handle, u16 queue_id) @@ -10763,7 +10766,7 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle) struct hclge_vport *vport = hclge_get_vport(handle); struct hclge_dev *hdev = vport->back; u16 reset_try_times = 0; - int reset_status; + u8 reset_status; u16 queue_gid; int ret; u16 i; @@ -10779,7 +10782,11 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle) } while (reset_try_times++ < HCLGE_TQP_RESET_TRY_TIMES) { - reset_status = hclge_get_reset_status(hdev, queue_gid); + ret = hclge_get_reset_status(hdev, queue_gid, + &reset_status); + if (ret) + return ret; + if (reset_status) break; -- cgit v1.2.3 From 4403f8062abecf24794e0fd3a3e424cc63ba6662 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 16 Sep 2021 17:05:29 +0200 Subject: xen/x86: drop redundant zeroing from cpu_initialize_context() Just after having obtained the pointer from kzalloc() there's no reason at all to set part of the area to all zero yet another time. Similarly there's no point explicitly clearing "ldt_ents". Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/14881835-a48e-29fa-0870-e177b10fcf65@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/smp_pv.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c index 96afadf9878e..7ed56c6075b0 100644 --- a/arch/x86/xen/smp_pv.c +++ b/arch/x86/xen/smp_pv.c @@ -290,8 +290,6 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) gdt = get_cpu_gdt_rw(cpu); - memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt)); - /* * Bring up the CPU in cpu_bringup_and_idle() with the stack * pointing just below where pt_regs would be if it were a normal @@ -308,8 +306,6 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) xen_copy_trap_info(ctxt->trap_ctxt); - ctxt->ldt_ents = 0; - BUG_ON((unsigned long)gdt & ~PAGE_MASK); gdt_mfn = arbitrary_virt_to_mfn(gdt); -- cgit v1.2.3 From f28347cc66395e96712f5c2db0a302ee75bafce6 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 08:13:08 +0200 Subject: Xen/gntdev: don't ignore kernel unmapping error While working on XSA-361 and its follow-ups, I failed to spot another place where the kernel mapping part of an operation was not treated the same as the user space part. Detect and propagate errors and add a 2nd pr_debug(). Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com Signed-off-by: Juergen Gross --- drivers/xen/gntdev.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 1e7f6b1c0c97..fec1b6537166 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -381,6 +381,14 @@ static int __unmap_grant_pages(struct gntdev_grant_map *map, int offset, map->unmap_ops[offset+i].handle, map->unmap_ops[offset+i].status); map->unmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + if (use_ptemod) { + if (map->kunmap_ops[offset+i].status) + err = -EINVAL; + pr_debug("kunmap handle=%u st=%d\n", + map->kunmap_ops[offset+i].handle, + map->kunmap_ops[offset+i].status); + map->kunmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + } } return err; } -- cgit v1.2.3 From 9074c79b62b6e0d91d7f716c6e4e9968eaf9e043 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:45:49 +0200 Subject: swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests While the hypervisor hasn't been enforcing this, we would still better avoid issuing requests with GFNs not aligned to the requested order. Instead of altering the value also in the call to panic(), drop it there for being static and hence easy to determine without being part of the panic message. Signed-off-by: Jan Beulich Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/7b3998e3-1233-4e5a-89ec-d740e77eb166@suse.com Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 9c9ba500ef23..c0c38672fee3 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -230,10 +230,11 @@ retry: /* * Get IO TLB memory from any location. */ - start = memblock_alloc(PAGE_ALIGN(bytes), PAGE_SIZE); + start = memblock_alloc(PAGE_ALIGN(bytes), + IO_TLB_SEGSIZE << IO_TLB_SHIFT); if (!start) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_ALIGN(bytes), PAGE_SIZE); + panic("%s: Failed to allocate %lu bytes\n", + __func__, PAGE_ALIGN(bytes)); /* * And replace that memory with pages under 4GB. -- cgit v1.2.3 From e243ae953b5926eba1a8fbea64cbf68094f86a44 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:48:03 +0200 Subject: PCI: only build xen-pcifront in PV-enabled environments The driver's module init function, pcifront_init(), invokes xen_pv_domain() first thing. That construct produces constant "false" when !CONFIG_XEN_PV. Hence there's no point building the driver in non-PV configurations. Drop the (now implicit and generally wrong) X86 dependency: At present, XEN_PV can only be set when X86 is also enabled. In general an architecture supporting Xen PV (and PCI) would want to have this driver built. Signed-off-by: Jan Beulich Reviewed-by: Stefano Stabellini Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com Signed-off-by: Juergen Gross --- drivers/pci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 0c473d75e625..43e615aa12ff 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -110,7 +110,7 @@ config PCI_PF_STUB config XEN_PCIDEV_FRONTEND tristate "Xen PCI Frontend" - depends on X86 && XEN + depends on XEN_PV select PCI_XEN select XEN_XENBUS_FRONTEND default y -- cgit v1.2.3 From 8e1034a526652f265ed993fab7f659eb8ae4b6f0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:49:04 +0200 Subject: xen/pci-swiotlb: reduce visibility of symbols xen_swiotlb and pci_xen_swiotlb_init() are only used within the file defining them, so make them static and remove the stubs. Otoh pci_xen_swiotlb_detect() has a use (as function pointer) from the main pci-swiotlb.c file - convert its stub to a #define to NULL. Signed-off-by: Jan Beulich Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com Signed-off-by: Juergen Gross --- arch/x86/include/asm/xen/swiotlb-xen.h | 6 +----- arch/x86/xen/pci-swiotlb-xen.c | 4 ++-- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/xen/swiotlb-xen.h b/arch/x86/include/asm/xen/swiotlb-xen.h index 6b56d0d45d15..66b4ddde7743 100644 --- a/arch/x86/include/asm/xen/swiotlb-xen.h +++ b/arch/x86/include/asm/xen/swiotlb-xen.h @@ -3,14 +3,10 @@ #define _ASM_X86_SWIOTLB_XEN_H #ifdef CONFIG_SWIOTLB_XEN -extern int xen_swiotlb; extern int __init pci_xen_swiotlb_detect(void); -extern void __init pci_xen_swiotlb_init(void); extern int pci_xen_swiotlb_init_late(void); #else -#define xen_swiotlb (0) -static inline int __init pci_xen_swiotlb_detect(void) { return 0; } -static inline void __init pci_xen_swiotlb_init(void) { } +#define pci_xen_swiotlb_detect NULL static inline int pci_xen_swiotlb_init_late(void) { return -ENXIO; } #endif diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c index 54f9aa7e8457..46df59aeaa06 100644 --- a/arch/x86/xen/pci-swiotlb-xen.c +++ b/arch/x86/xen/pci-swiotlb-xen.c @@ -18,7 +18,7 @@ #endif #include -int xen_swiotlb __read_mostly; +static int xen_swiotlb __read_mostly; /* * pci_xen_swiotlb_detect - set xen_swiotlb to 1 if necessary @@ -56,7 +56,7 @@ int __init pci_xen_swiotlb_detect(void) return xen_swiotlb; } -void __init pci_xen_swiotlb_init(void) +static void __init pci_xen_swiotlb_init(void) { if (xen_swiotlb) { xen_swiotlb_init_early(); -- cgit v1.2.3 From 794d5b8a497ff053f56856472e2fae038fa761aa Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:50:38 +0200 Subject: swiotlb-xen: this is PV-only on x86 The code is unreachable for HVM or PVH, and it also makes little sense in auto-translated environments. On Arm, with xen_{create,destroy}_contiguous_region() both being stubs, I have a hard time seeing what good the Xen specific variant does - the generic one ought to be fine for all purposes there. Still Arm code explicitly references symbols here, so the code will continue to be included there. Instead of making PCI_XEN's "select" conditional, simply drop it - SWIOTLB_XEN will be available unconditionally in the PV case anyway, and is - as explained above - dead code in non-PV environments. This in turn allows dropping the stubs for xen_{create,destroy}_contiguous_region(), the former of which was broken anyway - it failed to set the DMA handle output. Signed-off-by: Jan Beulich Reviewed-by: Christoph Hellwig Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com Signed-off-by: Juergen Gross --- arch/x86/Kconfig | 1 - drivers/xen/Kconfig | 1 + include/xen/xen-ops.h | 12 ------------ 3 files changed, 1 insertion(+), 13 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 88fb922c23a0..a71ced4c711f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2605,7 +2605,6 @@ config PCI_OLPC config PCI_XEN def_bool y depends on PCI && XEN - select SWIOTLB_XEN config MMCONF_FAM10H def_bool y diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index a37eb52fb401..22f5aff0c136 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -177,6 +177,7 @@ config XEN_GRANT_DMA_ALLOC config SWIOTLB_XEN def_bool y + depends on XEN_PV || ARM || ARM64 select DMA_OPS select SWIOTLB diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 39a5580f8feb..db28e79b77ee 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -46,19 +46,7 @@ extern unsigned long *xen_contiguous_bitmap; int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, unsigned int address_bits, dma_addr_t *dma_handle); - void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order); -#else -static inline int xen_create_contiguous_region(phys_addr_t pstart, - unsigned int order, - unsigned int address_bits, - dma_addr_t *dma_handle) -{ - return 0; -} - -static inline void xen_destroy_contiguous_region(phys_addr_t pstart, - unsigned int order) { } #endif #if defined(CONFIG_XEN_PV) -- cgit v1.2.3 From 0412016e48076f5f9dbdcc6613436e3c6db89523 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:32 +0300 Subject: fs/ntfs3: Fix wrong error message $Logfile -> $UpCase Fix wrong error message $Logfile -> $UpCase. Probably copy paste. Fixes: 203c2b3a406a ("fs/ntfs3: Add initialization of super block") Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index acfa00acf4dd..1e01184f4ee2 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -1201,7 +1201,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_UPCASE); if (IS_ERR(inode)) { err = PTR_ERR(inode); - ntfs_err(sb, "Failed to load \x24LogFile."); + ntfs_err(sb, "Failed to load $UpCase."); inode = NULL; goto out; } -- cgit v1.2.3 From 7ea04817866a5ac369f1a33d1b86d06a695aaedb Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:33 +0300 Subject: fs/ntfs3: Change EINVAL to ENOMEM when d_make_root fails Change EINVAL to ENOMEM when d_make_root fails because that is right errno. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 1e01184f4ee2..642bd63932d0 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -1284,7 +1284,7 @@ load_root: sb->s_root = d_make_root(inode); if (!sb->s_root) { - err = -EINVAL; + err = -ENOMEM; goto out; } -- cgit v1.2.3 From 5d7d6b16bc1dbe0f84997e639c49b5ed98a562f7 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:34 +0300 Subject: fs/ntfs3: Remove impossible fault condition in fill_super Remove root drop when we fault out. This can never happened because when we allocate root we eather fault when no root or success. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 642bd63932d0..ad185c723c0e 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -1295,12 +1295,6 @@ load_root: out: iput(inode); - - if (sb->s_root) { - d_drop(sb->s_root); - sb->s_root = NULL; - } - return err; } -- cgit v1.2.3 From bce1828f6d82ad0ffa3b7259d6f1769ffbcec30c Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:35 +0300 Subject: fs/ntfs3: Return straight without goto in fill_super In many places it is not needed to use goto out. We can just return right away. This will make code little bit more cleaner as we won't need to check error path. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 56 ++++++++++++++++---------------------------------------- 1 file changed, 16 insertions(+), 40 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index ad185c723c0e..31a9a0d16261 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -921,7 +921,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) err = ntfs_init_from_boot(sb, rq ? queue_logical_block_size(rq) : 512, bd_inode->i_size); if (err) - goto out; + return err; #ifdef CONFIG_NTFS3_64BIT_CLUSTER sb->s_maxbytes = MAX_LFS_FILESIZE; @@ -937,10 +937,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_VOL); inode = ntfs_iget5(sb, &ref, &NAME_VOLUME); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $Volume."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -988,10 +986,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_MIRR); inode = ntfs_iget5(sb, &ref, &NAME_MIRROR); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $MFTMirr."); - inode = NULL; - goto out; + return PTR_ERR(inode); } sbi->mft.recs_mirr = @@ -1004,10 +1000,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_LOG); inode = ntfs_iget5(sb, &ref, &NAME_LOGFILE); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load \x24LogFile."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -1025,16 +1019,14 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (!is_ro) { ntfs_warn(sb, "failed to replay log file. Can't mount rw!"); - err = -EINVAL; - goto out; + return -EINVAL; } } else if (sbi->volume.flags & VOLUME_FLAG_DIRTY) { if (!is_ro && !sbi->options->force) { ntfs_warn( sb, "volume is dirty and \"force\" flag is not set!"); - err = -EINVAL; - goto out; + return -EINVAL; } } @@ -1044,10 +1036,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_MFT); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $MFT."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -1071,10 +1061,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_BADCLUST); inode = ntfs_iget5(sb, &ref, &NAME_BADCLUS); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $BadClus."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -1096,10 +1084,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_BITMAP); inode = ntfs_iget5(sb, &ref, &NAME_BITMAP); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $Bitmap."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -1129,17 +1115,15 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Compute the MFT zone. */ err = ntfs_refresh_zone(sbi); if (err) - goto out; + return err; /* Load $AttrDef. */ ref.low = cpu_to_le32(MFT_REC_ATTR); ref.seq = cpu_to_le16(MFT_REC_ATTR); inode = ntfs_iget5(sbi->sb, &ref, &NAME_ATTRDEF); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $AttrDef -> %d", err); - inode = NULL; - goto out; + return PTR_ERR(inode); } if (inode->i_size < sizeof(struct ATTR_DEF_ENTRY)) { @@ -1200,10 +1184,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ref.seq = cpu_to_le16(MFT_REC_UPCASE); inode = ntfs_iget5(sb, &ref, &NAME_UPCASE); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load $UpCase."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); @@ -1249,7 +1231,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Load $Secure. */ err = ntfs_security_init(sbi); if (err) - goto out; + return err; /* Load $Extend. */ err = ntfs_extend_init(sbi); @@ -1273,26 +1255,20 @@ load_root: ref.seq = cpu_to_le16(MFT_REC_ROOT); inode = ntfs_iget5(sb, &ref, &NAME_ROOT); if (IS_ERR(inode)) { - err = PTR_ERR(inode); ntfs_err(sb, "Failed to load root."); - inode = NULL; - goto out; + return PTR_ERR(inode); } ni = ntfs_i(inode); sb->s_root = d_make_root(inode); - - if (!sb->s_root) { - err = -ENOMEM; - goto out; - } + if (!sb->s_root) + return -ENOMEM; fc->fs_private = NULL; fc->s_fs_info = NULL; return 0; - out: iput(inode); return err; -- cgit v1.2.3 From 10b4f12c7028399007aaebc25810b18d8f7731a7 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:36 +0300 Subject: fs/ntfs3: Remove unnecessary variable loading in fill_super Remove some unnecessary variable loading. These look like copy paste work and they are not used to anything. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 31a9a0d16261..4ff61534682c 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -877,7 +877,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) struct block_device *bdev = sb->s_bdev; struct inode *bd_inode = bdev->bd_inode; struct request_queue *rq = bdev_get_queue(bdev); - struct inode *inode = NULL; + struct inode *inode; struct ntfs_inode *ni; size_t i, tt; CLST vcn, lcn, len; @@ -977,9 +977,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) sbi->volume.major_ver = info->major_ver; sbi->volume.minor_ver = info->minor_ver; sbi->volume.flags = info->flags; - sbi->volume.ni = ni; - inode = NULL; /* Load $MFTMirr to estimate recs_mirr. */ ref.low = cpu_to_le32(MFT_REC_MIRR); @@ -1011,7 +1009,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) goto out; iput(inode); - inode = NULL; is_ro = sb_rdonly(sbi->sb); @@ -1088,8 +1085,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) return PTR_ERR(inode); } - ni = ntfs_i(inode); - #ifndef CONFIG_NTFS3_64BIT_CLUSTER if (inode->i_size >> 32) { err = -EINVAL; @@ -1188,8 +1183,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) return PTR_ERR(inode); } - ni = ntfs_i(inode); - if (inode->i_size != 0x10000 * sizeof(short)) { err = -EINVAL; goto out; @@ -1225,7 +1218,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) } iput(inode); - inode = NULL; if (is_ntfs3(sbi)) { /* Load $Secure. */ @@ -1259,8 +1251,6 @@ load_root: return PTR_ERR(inode); } - ni = ntfs_i(inode); - sb->s_root = d_make_root(inode); if (!sb->s_root) return -ENOMEM; -- cgit v1.2.3 From b4f110d65e21bf937fc5d3d894ec1cd540c85a71 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:37 +0300 Subject: fs/ntfs3: Use sb instead of sbi->sb in fill_super Use sb instead of sbi->sb in fill_super. We have sb so why not use it. Also makes code more readable. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 4ff61534682c..c18705bf857f 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -1010,7 +1010,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) iput(inode); - is_ro = sb_rdonly(sbi->sb); + is_ro = sb_rdonly(sb); if (sbi->flags & NTFS_FLAGS_NEED_REPLAY) { if (!is_ro) { @@ -1101,7 +1101,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Not necessary. */ sbi->used.bitmap.set_tail = true; - err = wnd_init(&sbi->used.bitmap, sbi->sb, tt); + err = wnd_init(&sbi->used.bitmap, sb, tt); if (err) goto out; @@ -1115,7 +1115,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Load $AttrDef. */ ref.low = cpu_to_le32(MFT_REC_ATTR); ref.seq = cpu_to_le16(MFT_REC_ATTR); - inode = ntfs_iget5(sbi->sb, &ref, &NAME_ATTRDEF); + inode = ntfs_iget5(sb, &ref, &NAME_ATTRDEF); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $AttrDef -> %d", err); return PTR_ERR(inode); -- cgit v1.2.3 From 0cde7e81cd448a5df01a3960f6608b15dc3f12a3 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:38 +0300 Subject: fs/ntfs3: Remove tmp var is_ro in ntfs_fill_super We only use this in two places so we do not really need it. Also wrapper sb_rdonly() is pretty self explanatory. This will make little bit easier to read this super long variable list in the beginning of ntfs_fill_super(). Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index c18705bf857f..93b8a1f4d748 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -887,7 +887,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) struct ATTR_DEF_ENTRY *t; u16 *upcase; u16 *shared; - bool is_ro; struct MFT_REF ref; ref.high = 0; @@ -1010,16 +1009,14 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) iput(inode); - is_ro = sb_rdonly(sb); - if (sbi->flags & NTFS_FLAGS_NEED_REPLAY) { - if (!is_ro) { + if (!sb_rdonly(sb)) { ntfs_warn(sb, "failed to replay log file. Can't mount rw!"); return -EINVAL; } } else if (sbi->volume.flags & VOLUME_FLAG_DIRTY) { - if (!is_ro && !sbi->options->force) { + if (!sb_rdonly(sb) && !sbi->options->force) { ntfs_warn( sb, "volume is dirty and \"force\" flag is not set!"); -- cgit v1.2.3 From 4ea41b3eb5fd51b47742c6fa2ac1851a51ab0c69 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:39 +0300 Subject: fs/ntfs3: Remove tmp pointer bd_inode in fill_super Drop tmp pointer bd_inode because this is only used ones in fill_super. Also we have so many initializing happening at the beginning that it is already way too much to follow. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 93b8a1f4d748..e5ec808bd052 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -875,7 +875,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) int err; struct ntfs_sb_info *sbi = sb->s_fs_info; struct block_device *bdev = sb->s_bdev; - struct inode *bd_inode = bdev->bd_inode; struct request_queue *rq = bdev_get_queue(bdev); struct inode *inode; struct ntfs_inode *ni; @@ -918,7 +917,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Parse boot. */ err = ntfs_init_from_boot(sb, rq ? queue_logical_block_size(rq) : 512, - bd_inode->i_size); + bdev->bd_inode->i_size); if (err) return err; -- cgit v1.2.3 From 0056b273757b3057a5aff73f96a7fa134641caf4 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:40 +0300 Subject: fs/ntfs3: Remove tmp pointer upcase in fill_super We can survive without this tmp point upcase. So remove it we don't have so many tmp pointer in this function. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index e5ec808bd052..8ce0d4f439a1 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -884,7 +884,6 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) const struct VOLUME_INFO *info; u32 idx, done, bytes; struct ATTR_DEF_ENTRY *t; - u16 *upcase; u16 *shared; struct MFT_REF ref; @@ -1184,11 +1183,9 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) goto out; } - upcase = sbi->upcase; - for (idx = 0; idx < (0x10000 * sizeof(short) >> PAGE_SHIFT); idx++) { const __le16 *src; - u16 *dst = Add2Ptr(upcase, idx << PAGE_SHIFT); + u16 *dst = Add2Ptr(sbi->upcase, idx << PAGE_SHIFT); struct page *page = ntfs_map_page(inode->i_mapping, idx); if (IS_ERR(page)) { @@ -1207,10 +1204,10 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ntfs_unmap_page(page); } - shared = ntfs_set_shared(upcase, 0x10000 * sizeof(short)); - if (shared && upcase != shared) { + shared = ntfs_set_shared(sbi->upcase, 0x10000 * sizeof(short)); + if (shared && sbi->upcase != shared) { + kvfree(sbi->upcase); sbi->upcase = shared; - kvfree(upcase); } iput(inode); -- cgit v1.2.3 From 0e59a87ee619915c2eb189eb232a972c276681fb Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:41 +0300 Subject: fs/ntfs3: Initialize pointer before use place in fill_super Initializing should be as close as possible when we use it so that we do not need to scroll up to see what is happening. Also bdev_get_queue() can never return NULL so we do not need to check for !rq. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 8ce0d4f439a1..3d034eac2bd1 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -875,7 +875,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) int err; struct ntfs_sb_info *sbi = sb->s_fs_info; struct block_device *bdev = sb->s_bdev; - struct request_queue *rq = bdev_get_queue(bdev); + struct request_queue *rq; struct inode *inode; struct ntfs_inode *ni; size_t i, tt; @@ -904,9 +904,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) return -EINVAL; } - if (!rq || !blk_queue_discard(rq) || !rq->limits.discard_granularity) { - ; - } else { + rq = bdev_get_queue(bdev); + if (blk_queue_discard(rq) && rq->limits.discard_granularity) { sbi->discard_granularity = rq->limits.discard_granularity; sbi->discard_granularity_mask_inv = ~(u64)(sbi->discard_granularity - 1); -- cgit v1.2.3 From 28861e3bbd9e7ac4cd9c811aad71b4d116e27930 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Thu, 9 Sep 2021 21:09:42 +0300 Subject: fs/ntfs3: Initiliaze sb blocksize only in one place + refactor Right now sb blocksize first get initiliazed in fill_super but in can be changed in helper function. It makes more sense to that this happened only in one place. Because we move this to helper function it makes more sense that s_maxbytes will also be there. I rather have every sb releted thing in fill_super, but because there is already sb releted stuff in this helper. This will have to do for now. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 3d034eac2bd1..cefb9ddaf4db 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -840,8 +840,7 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, rec->total = cpu_to_le32(sbi->record_size); ((struct ATTRIB *)Add2Ptr(rec, ao))->type = ATTR_END; - if (sbi->cluster_size < PAGE_SIZE) - sb_set_blocksize(sb, sbi->cluster_size); + sb_set_blocksize(sb, min_t(u32, sbi->cluster_size, PAGE_SIZE)); sbi->block_mask = sb->s_blocksize - 1; sbi->blocks_per_cluster = sbi->cluster_size >> sb->s_blocksize_bits; @@ -854,9 +853,11 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, if (clusters >= (1ull << (64 - sbi->cluster_bits))) sbi->maxbytes = -1; sbi->maxbytes_sparse = -1; + sb->s_maxbytes = MAX_LFS_FILESIZE; #else /* Maximum size for sparse file. */ sbi->maxbytes_sparse = (1ull << (sbi->cluster_bits + 32)) - 1; + sb->s_maxbytes = 0xFFFFFFFFull << sbi->cluster_bits; #endif err = 0; @@ -911,20 +912,12 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) ~(u64)(sbi->discard_granularity - 1); } - sb_set_blocksize(sb, PAGE_SIZE); - /* Parse boot. */ err = ntfs_init_from_boot(sb, rq ? queue_logical_block_size(rq) : 512, bdev->bd_inode->i_size); if (err) return err; -#ifdef CONFIG_NTFS3_64BIT_CLUSTER - sb->s_maxbytes = MAX_LFS_FILESIZE; -#else - sb->s_maxbytes = 0xFFFFFFFFull << sbi->cluster_bits; -#endif - /* * Load $Volume. This should be done before $LogFile * 'cause 'sbi->volume.ni' is used 'ntfs_set_state'. -- cgit v1.2.3 From a0fc05a37cae9e61aa29f7e283662ce70f7df342 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Fri, 10 Sep 2021 00:57:53 +0300 Subject: Doc/fs/ntfs3: Fix rst format and make it cleaner Current ntfs3 rst documentation is broken. I turn table to list table as this is current Linux documentation quide line. Simple table also did not quite work in our situation as we need to span rows together. It still look quite good as text so we did not loss anything. This will also make diffing quite bit more pleasure. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- Documentation/filesystems/ntfs3.rst | 139 ++++++++++++++++++++---------------- 1 file changed, 76 insertions(+), 63 deletions(-) diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst index 7b6afe452197..d67ccd22c63b 100644 --- a/Documentation/filesystems/ntfs3.rst +++ b/Documentation/filesystems/ntfs3.rst @@ -4,99 +4,112 @@ NTFS3 ===== - Summary and Features ==================== -NTFS3 is fully functional NTFS Read-Write driver. The driver works with -NTFS versions up to 3.1, normal/compressed/sparse files -and journal replaying. File system type to use on mount is 'ntfs3'. +NTFS3 is fully functional NTFS Read-Write driver. The driver works with NTFS +versions up to 3.1. File system type to use on mount is *ntfs3*. - This driver implements NTFS read/write support for normal, sparse and compressed files. -- Supports native journal replaying; -- Supports extended attributes - Predefined extended attributes: - - 'system.ntfs_security' gets/sets security - descriptor (SECURITY_DESCRIPTOR_RELATIVE) - - 'system.ntfs_attrib' gets/sets ntfs file/dir attributes. - Note: applied to empty files, this allows to switch type between - sparse(0x200), compressed(0x800) and normal; +- Supports native journal replaying. - Supports NFS export of mounted NTFS volumes. +- Supports extended attributes. Predefined extended attributes: + + - *system.ntfs_security* gets/sets security + + Descriptor: SECURITY_DESCRIPTOR_RELATIVE + + - *system.ntfs_attrib* gets/sets ntfs file/dir attributes. + + Note: Applied to empty files, this allows to switch type between + sparse(0x200), compressed(0x800) and normal. Mount Options ============= The list below describes mount options supported by NTFS3 driver in addition to -generic ones. +generic ones. You can use every mount option with **no** option. If it is in +this table marked with no it means default is without **no**. -=============================================================================== +.. flat-table:: + :widths: 1 5 + :fill-cells: -iocharset=name This option informs the driver how to interpret path - strings and translate them to Unicode and back. If - this option is not set, the default codepage will be - used (CONFIG_NLS_DEFAULT). - Examples: - 'iocharset=utf8' + * - iocharset=name + - This option informs the driver how to interpret path strings and + translate them to Unicode and back. If this option is not set, the + default codepage will be used (CONFIG_NLS_DEFAULT). -uid= -gid= -umask= Controls the default permissions for files/directories created - after the NTFS volume is mounted. + Example: iocharset=utf8 -fmask= -dmask= Instead of specifying umask which applies both to - files and directories, fmask applies only to files and - dmask only to directories. + * - uid= + - :rspan:`1` + * - gid= -nohidden Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) - attribute will not be shown under Linux. + * - umask= + - Controls the default permissions for files/directories created after + the NTFS volume is mounted. -sys_immutable Files with the Windows-specific SYSTEM - (FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system - immutable files. + * - dmask= + - :rspan:`1` Instead of specifying umask which applies both to files and + directories, fmask applies only to files and dmask only to directories. + * - fmask= -discard Enable support of the TRIM command for improved performance - on delete operations, which is recommended for use with the - solid-state drives (SSD). + * - noacsrules + - "No access rules" mount option sets access rights for files/folders to + 777 and owner/group to root. This mount option absorbs all other + permissions. -force Forces the driver to mount partitions even if 'dirty' flag - (volume dirty) is set. Not recommended for use. + - Permissions change for files/folders will be reported as successful, + but they will remain 777. -sparse Create new files as "sparse". + - Owner/group change will be reported as successful, butthey will stay + as root. -showmeta Use this parameter to show all meta-files (System Files) on - a mounted NTFS partition. - By default, all meta-files are hidden. + * - nohidden + - Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) attribute + will not be shown under Linux. -prealloc Preallocate space for files excessively when file size is - increasing on writes. Decreases fragmentation in case of - parallel write operations to different files. + * - sys_immutable + - Files with the Windows-specific SYSTEM (FILE_ATTRIBUTE_SYSTEM) attribute + will be marked as system immutable files. -noacsrules "No access rules" mount option sets access rights for - files/folders to 777 and owner/group to root. This mount - option absorbs all other permissions: - - permissions change for files/folders will be reported - as successful, but they will remain 777; - - owner/group change will be reported as successful, but - they will stay as root + * - discard + - Enable support of the TRIM command for improved performance on delete + operations, which is recommended for use with the solid-state drives + (SSD). -acl Support POSIX ACLs (Access Control Lists). Effective if - supported by Kernel. Not to be confused with NTFS ACLs. - The option specified as acl enables support for POSIX ACLs. + * - force + - Forces the driver to mount partitions even if volume is marked dirty. + Not recommended for use. -=============================================================================== + * - sparse + - Create new files as sparse. -ToDo list -========= + * - showmeta + - Use this parameter to show all meta-files (System Files) on a mounted + NTFS partition. By default, all meta-files are hidden. -- Full journaling support (currently journal replaying is supported) over JBD. + * - prealloc + - Preallocate space for files excessively when file size is increasing on + writes. Decreases fragmentation in case of parallel write operations to + different files. + * - acl + - Support POSIX ACLs (Access Control Lists). Effective if supported by + Kernel. Not to be confused with NTFS ACLs. The option specified as acl + enables support for POSIX ACLs. + +Todo list +========= +- Full journaling support over JBD. Currently journal replaying is supported + which is not necessarily as effectice as JBD would be. References ========== -https://www.paragon-software.com/home/ntfs-linux-professional/ - - Commercial version of the NTFS driver for Linux. +- Commercial version of the NTFS driver for Linux. + https://www.paragon-software.com/home/ntfs-linux-professional/ -almaz.alexandrovich@paragon-software.com - - Direct e-mail address for feedback and requests on the NTFS3 implementation. +- Direct e-mail address for feedback and requests on the NTFS3 implementation. + almaz.alexandrovich@paragon-software.com -- cgit v1.2.3 From 880301bb313295a65523e79bc5666f5cf49eb3ed Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 10 Sep 2021 11:02:02 +0100 Subject: fs/ntfs3: Fix a memory leak on object opts Currently a failed allocation on sbi->upcase will cause an exit via the label free_sbi causing a memory leak on object opts. Fix this by re-ordering the exit paths free_opts and free_sbi so that kfree's occur in the reverse allocation order. Addresses-Coverity: ("Resource leak") Fixes: 27fac77707a1 ("fs/ntfs3: Init spi more in init_fs_context than fill_super") Signed-off-by: Colin Ian King Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index cefb9ddaf4db..6a535b144ff9 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -1393,10 +1393,10 @@ ok: fc->ops = &ntfs_context_ops; return 0; -free_opts: - kfree(opts); free_sbi: kfree(sbi); +free_opts: + kfree(opts); return -ENOMEM; } -- cgit v1.2.3 From ebcc36ea1960d79406d417cb6b107946da8b5210 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Wed, 15 Sep 2021 05:32:43 -0700 Subject: MAINTAINERS: Update Broadcom RDMA maintainers Updating the bnxt_re maintainers as Naresh decided to leave Broadcom. Link: https://lore.kernel.org/r/1631709163-2287-13-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..9c495ecd2248 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3821,7 +3821,6 @@ F: drivers/scsi/mpi3mr/ BROADCOM NETXTREME-E ROCE DRIVER M: Selvin Xavier -M: Naresh Kumar PBS L: linux-rdma@vger.kernel.org S: Supported W: http://www.broadcom.com -- cgit v1.2.3 From 5b1e985f7626307c451f98883f5e2665ee208e1c Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:19 -0500 Subject: RDMA/irdma: Skip CQP ring during a reset Due to duplicate reset flags, CQP commands are processed during reset. This leads CQP failures such as below: irdma0: [Delete Local MAC Entry Cmd Error][op_code=49] status=-27 waiting=1 completion_err=0 maj=0x0 min=0x0 Remove the redundant flag and set the correct reset flag so CPQ is paused during reset Fixes: 8498a30e1b94 ("RDMA/irdma: Register auxiliary driver and implement private channel OPs") Link: https://lore.kernel.org/r/20210916191222.824-2-shiraz.saleem@intel.com Reported-by: LiLiang Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/cm.c | 4 ++-- drivers/infiniband/hw/irdma/hw.c | 6 +++--- drivers/infiniband/hw/irdma/i40iw_if.c | 2 +- drivers/infiniband/hw/irdma/main.h | 1 - drivers/infiniband/hw/irdma/utils.c | 2 +- drivers/infiniband/hw/irdma/verbs.c | 3 +-- 6 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/irdma/cm.c b/drivers/infiniband/hw/irdma/cm.c index 6b62299abfbb..6dea0a49d171 100644 --- a/drivers/infiniband/hw/irdma/cm.c +++ b/drivers/infiniband/hw/irdma/cm.c @@ -3496,7 +3496,7 @@ static void irdma_cm_disconn_true(struct irdma_qp *iwqp) original_hw_tcp_state == IRDMA_TCP_STATE_TIME_WAIT || last_ae == IRDMA_AE_RDMAP_ROE_BAD_LLP_CLOSE || last_ae == IRDMA_AE_BAD_CLOSE || - last_ae == IRDMA_AE_LLP_CONNECTION_RESET || iwdev->reset)) { + last_ae == IRDMA_AE_LLP_CONNECTION_RESET || iwdev->rf->reset)) { issue_close = 1; iwqp->cm_id = NULL; qp->term_flags = 0; @@ -4250,7 +4250,7 @@ void irdma_cm_teardown_connections(struct irdma_device *iwdev, u32 *ipaddr, teardown_entry); attr.qp_state = IB_QPS_ERR; irdma_modify_qp(&cm_node->iwqp->ibqp, &attr, IB_QP_STATE, NULL); - if (iwdev->reset) + if (iwdev->rf->reset) irdma_cm_disconn(cm_node->iwqp); irdma_rem_ref_cm_node(cm_node); } diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 00de5ee9a260..33c06a3a4f63 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -1489,7 +1489,7 @@ void irdma_reinitialize_ieq(struct irdma_sc_vsi *vsi) irdma_puda_dele_rsrc(vsi, IRDMA_PUDA_RSRC_TYPE_IEQ, false); if (irdma_initialize_ieq(iwdev)) { - iwdev->reset = true; + iwdev->rf->reset = true; rf->gen_ops.request_reset(rf); } } @@ -1632,13 +1632,13 @@ void irdma_rt_deinit_hw(struct irdma_device *iwdev) case IEQ_CREATED: if (!iwdev->roce_mode) irdma_puda_dele_rsrc(&iwdev->vsi, IRDMA_PUDA_RSRC_TYPE_IEQ, - iwdev->reset); + iwdev->rf->reset); fallthrough; case ILQ_CREATED: if (!iwdev->roce_mode) irdma_puda_dele_rsrc(&iwdev->vsi, IRDMA_PUDA_RSRC_TYPE_ILQ, - iwdev->reset); + iwdev->rf->reset); break; default: ibdev_warn(&iwdev->ibdev, "bad init_state = %d\n", iwdev->init_state); diff --git a/drivers/infiniband/hw/irdma/i40iw_if.c b/drivers/infiniband/hw/irdma/i40iw_if.c index bddf88194d09..d219f64b2c3d 100644 --- a/drivers/infiniband/hw/irdma/i40iw_if.c +++ b/drivers/infiniband/hw/irdma/i40iw_if.c @@ -55,7 +55,7 @@ static void i40iw_close(struct i40e_info *cdev_info, struct i40e_client *client, iwdev = to_iwdev(ibdev); if (reset) - iwdev->reset = true; + iwdev->rf->reset = true; iwdev->iw_status = 0; irdma_port_ibevent(iwdev); diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h index 743d9e143a99..b678fe712447 100644 --- a/drivers/infiniband/hw/irdma/main.h +++ b/drivers/infiniband/hw/irdma/main.h @@ -346,7 +346,6 @@ struct irdma_device { bool roce_mode:1; bool roce_dcqcn_en:1; bool dcb:1; - bool reset:1; bool iw_ooo:1; enum init_completion_state init_state; diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c index e94470991fe0..ac91ea5296db 100644 --- a/drivers/infiniband/hw/irdma/utils.c +++ b/drivers/infiniband/hw/irdma/utils.c @@ -2507,7 +2507,7 @@ void irdma_modify_qp_to_err(struct irdma_sc_qp *sc_qp) struct irdma_qp *qp = sc_qp->qp_uk.back_qp; struct ib_qp_attr attr; - if (qp->iwdev->reset) + if (qp->iwdev->rf->reset) return; attr.qp_state = IB_QPS_ERR; diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 4fc323402073..829ddfa7e144 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -535,8 +535,7 @@ static int irdma_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata) irdma_qp_rem_ref(&iwqp->ibqp); wait_for_completion(&iwqp->free_qp); irdma_free_lsmm_rsrc(iwqp); - if (!iwdev->reset) - irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp); + irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp); if (!iwqp->user_mode) { if (iwqp->iwscq) { -- cgit v1.2.3 From f4475f249445b3c1fb99919b0514a075b6d6b3d4 Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:20 -0500 Subject: RDMA/irdma: Validate number of CQ entries on create CQ Add lower bound check for CQ entries at creation time. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-3-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 829ddfa7e144..23c47482c749 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -2034,7 +2034,7 @@ static int irdma_create_cq(struct ib_cq *ibcq, /* Kmode allocations */ int rsize; - if (entries > rf->max_cqe) { + if (entries < 1 || entries > rf->max_cqe) { err_code = -EINVAL; goto cq_free_rsrc; } -- cgit v1.2.3 From d3bdcd59633907ee306057b6bb70f06dce47dddc Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:21 -0500 Subject: RDMA/irdma: Report correct WC error when transport retry counter is exceeded When the retry counter exceeds, as the remote QP didn't send any Ack or Nack an asynchronous event (AE) for too many retries is generated. Add code to handle the AE and set the correct IB WC error code IB_WC_RETRY_EXC_ERR. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-4-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/hw.c | 3 +++ drivers/infiniband/hw/irdma/user.h | 1 + drivers/infiniband/hw/irdma/verbs.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 33c06a3a4f63..cb9a8e24e3b7 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -176,6 +176,9 @@ static void irdma_set_flush_fields(struct irdma_sc_qp *qp, case IRDMA_AE_LLP_RECEIVED_MPA_CRC_ERROR: qp->flush_code = FLUSH_GENERAL_ERR; break; + case IRDMA_AE_LLP_TOO_MANY_RETRIES: + qp->flush_code = FLUSH_RETRY_EXC_ERR; + break; default: qp->flush_code = FLUSH_FATAL_ERR; break; diff --git a/drivers/infiniband/hw/irdma/user.h b/drivers/infiniband/hw/irdma/user.h index ff705f323233..267102d1049d 100644 --- a/drivers/infiniband/hw/irdma/user.h +++ b/drivers/infiniband/hw/irdma/user.h @@ -102,6 +102,7 @@ enum irdma_flush_opcode { FLUSH_REM_OP_ERR, FLUSH_LOC_LEN_ERR, FLUSH_FATAL_ERR, + FLUSH_RETRY_EXC_ERR, }; enum irdma_cmpl_status { diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 23c47482c749..c7e129ee74d0 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -3352,6 +3352,8 @@ static enum ib_wc_status irdma_flush_err_to_ib_wc_status(enum irdma_flush_opcode return IB_WC_LOC_LEN_ERR; case FLUSH_GENERAL_ERR: return IB_WC_WR_FLUSH_ERR; + case FLUSH_RETRY_EXC_ERR: + return IB_WC_RETRY_EXC_ERR; case FLUSH_FATAL_ERR: default: return IB_WC_FATAL_ERR; -- cgit v1.2.3 From 9f7fa37a6bd90f2749c67f8524334c387d972eb9 Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:22 -0500 Subject: RDMA/irdma: Report correct WC error when there are MW bind errors Report the correct WC error when MW bind error related asynchronous events are generated by HW. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-5-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/hw.c | 5 +++++ drivers/infiniband/hw/irdma/user.h | 1 + drivers/infiniband/hw/irdma/verbs.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index cb9a8e24e3b7..7de525a5ccf8 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -179,6 +179,11 @@ static void irdma_set_flush_fields(struct irdma_sc_qp *qp, case IRDMA_AE_LLP_TOO_MANY_RETRIES: qp->flush_code = FLUSH_RETRY_EXC_ERR; break; + case IRDMA_AE_AMP_MWBIND_INVALID_RIGHTS: + case IRDMA_AE_AMP_MWBIND_BIND_DISABLED: + case IRDMA_AE_AMP_MWBIND_INVALID_BOUNDS: + qp->flush_code = FLUSH_MW_BIND_ERR; + break; default: qp->flush_code = FLUSH_FATAL_ERR; break; diff --git a/drivers/infiniband/hw/irdma/user.h b/drivers/infiniband/hw/irdma/user.h index 267102d1049d..3dcbb1fbf2c6 100644 --- a/drivers/infiniband/hw/irdma/user.h +++ b/drivers/infiniband/hw/irdma/user.h @@ -103,6 +103,7 @@ enum irdma_flush_opcode { FLUSH_LOC_LEN_ERR, FLUSH_FATAL_ERR, FLUSH_RETRY_EXC_ERR, + FLUSH_MW_BIND_ERR, }; enum irdma_cmpl_status { diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index c7e129ee74d0..7110ebf834f9 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -3354,6 +3354,8 @@ static enum ib_wc_status irdma_flush_err_to_ib_wc_status(enum irdma_flush_opcode return IB_WC_WR_FLUSH_ERR; case FLUSH_RETRY_EXC_ERR: return IB_WC_RETRY_EXC_ERR; + case FLUSH_MW_BIND_ERR: + return IB_WC_MW_BIND_ERR; case FLUSH_FATAL_ERR: default: return IB_WC_FATAL_ERR; -- cgit v1.2.3 From d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Sep 2021 10:56:32 -0700 Subject: sparc64: fix pci_iounmap() when CONFIG_PCI is not set Guenter reported [1] that the pci_iounmap() changes remain problematic, with sparc64 allnoconfig and tinyconfig still not building due to the header file changes and confusion with the arch-specific pci_iounmap() implementation. I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of doing its own thing, since it turns out that the sparc64 version of pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this just fixes the build by avoiding the trivial re-definition of the empty case. Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1] Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2] Reported-by: Guenter Roeck Cc: David Miller Signed-off-by: Linus Torvalds --- arch/sparc/lib/iomap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c index c9da9f139694..f3a8cd491ce0 100644 --- a/arch/sparc/lib/iomap.c +++ b/arch/sparc/lib/iomap.c @@ -19,8 +19,10 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); +#ifdef CONFIG_PCI void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { /* nothing to do */ } EXPORT_SYMBOL(pci_iounmap); +#endif -- cgit v1.2.3 From e8f71f89236ef82d449991bfbc237e3cb6ea584f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 8 Sep 2021 12:08:17 -0700 Subject: drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck Cc: Ben Skeggs Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Linus Torvalds --- drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c index b0ece71aefde..ce774579c89d 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c @@ -57,7 +57,7 @@ nvkm_control_mthd_pstate_info(struct nvkm_control *ctrl, void *data, u32 size) args->v0.count = 0; args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE; args->v0.ustate_dc = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE; - args->v0.pwrsrc = -ENOSYS; + args->v0.pwrsrc = -ENODEV; args->v0.pstate = NVIF_CONTROL_PSTATE_INFO_V0_PSTATE_UNKNOWN; } -- cgit v1.2.3 From d4ffd5df9d18031b6a53f934388726775b4452d3 Mon Sep 17 00:00:00 2001 From: Jiashuo Liang Date: Fri, 30 Jul 2021 11:01:52 +0800 Subject: x86/fault: Fix wrong signal when vsyscall fails with pkey The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops() with the parameter @signal being actually @pkey, which will send a signal numbered with the argument in @pkey. This bug can be triggered when the kernel fails to access user-given memory pages that are protected by a pkey, so it can go down the do_user_addr_fault() path and pass the !user_mode() check in __bad_area_nosemaphore(). Most cases will simply run the kernel fixup code to make an -EFAULT. But when another condition current->thread.sig_on_uaccess_err is met, which is only used to emulate vsyscall, the kernel will generate the wrong signal. Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this. [ bp: Massage commit message, fix build error as reported by the 0day bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ] Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode") Reported-by: kernel test robot Signed-off-by: Jiashuo Liang Signed-off-by: Borislav Petkov Acked-by: Dave Hansen Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn --- arch/x86/include/asm/pkeys.h | 2 -- arch/x86/mm/fault.c | 26 ++++++++++++++++++-------- include/linux/pkeys.h | 2 ++ 3 files changed, 20 insertions(+), 10 deletions(-) diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h index 5c7bcaa79623..1d5f14aff5f6 100644 --- a/arch/x86/include/asm/pkeys.h +++ b/arch/x86/include/asm/pkeys.h @@ -2,8 +2,6 @@ #ifndef _ASM_X86_PKEYS_H #define _ASM_X86_PKEYS_H -#define ARCH_DEFAULT_PKEY 0 - /* * If more than 16 keys are ever supported, a thorough audit * will be necessary to ensure that the types that store key diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index b2eefdefc108..84a2c8c4af73 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -710,7 +710,8 @@ oops: static noinline void kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code, - unsigned long address, int signal, int si_code) + unsigned long address, int signal, int si_code, + u32 pkey) { WARN_ON_ONCE(user_mode(regs)); @@ -735,8 +736,12 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code, set_signal_archinfo(address, error_code); - /* XXX: hwpoison faults will set the wrong code. */ - force_sig_fault(signal, si_code, (void __user *)address); + if (si_code == SEGV_PKUERR) { + force_sig_pkuerr((void __user *)address, pkey); + } else { + /* XXX: hwpoison faults will set the wrong code. */ + force_sig_fault(signal, si_code, (void __user *)address); + } } /* @@ -798,7 +803,8 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, struct task_struct *tsk = current; if (!user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, pkey, si_code); + kernelmode_fixup_or_oops(regs, error_code, address, + SIGSEGV, si_code, pkey); return; } @@ -930,7 +936,8 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address, { /* Kernel mode? Handle exceptions or die: */ if (!user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, SIGBUS, BUS_ADRERR); + kernelmode_fixup_or_oops(regs, error_code, address, + SIGBUS, BUS_ADRERR, ARCH_DEFAULT_PKEY); return; } @@ -1396,7 +1403,8 @@ good_area: */ if (!user_mode(regs)) kernelmode_fixup_or_oops(regs, error_code, address, - SIGBUS, BUS_ADRERR); + SIGBUS, BUS_ADRERR, + ARCH_DEFAULT_PKEY); return; } @@ -1416,7 +1424,8 @@ good_area: return; if (fatal_signal_pending(current) && !user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, 0, 0); + kernelmode_fixup_or_oops(regs, error_code, address, + 0, 0, ARCH_DEFAULT_PKEY); return; } @@ -1424,7 +1433,8 @@ good_area: /* Kernel mode? Handle exceptions or die: */ if (!user_mode(regs)) { kernelmode_fixup_or_oops(regs, error_code, address, - SIGSEGV, SEGV_MAPERR); + SIGSEGV, SEGV_MAPERR, + ARCH_DEFAULT_PKEY); return; } diff --git a/include/linux/pkeys.h b/include/linux/pkeys.h index 6beb26b7151d..86be8bf27b41 100644 --- a/include/linux/pkeys.h +++ b/include/linux/pkeys.h @@ -4,6 +4,8 @@ #include +#define ARCH_DEFAULT_PKEY 0 + #ifdef CONFIG_ARCH_HAS_PKEYS #include #else /* ! CONFIG_ARCH_HAS_PKEYS */ -- cgit v1.2.3 From c9c3b6811f7429b8c292de5774cea67f3a033eb2 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:35 +0200 Subject: netfilter: conntrack: make max chain length random Similar to commit 67d6d681e15b ("ipv4: make exception cache less predictible"): Use a random drop length to make it harder to detect when entries were hashed to same bucket list. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 94e18fb9690d..91b7edaa635c 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -77,7 +77,8 @@ static __read_mostly bool nf_conntrack_locks_all; #define GC_SCAN_INTERVAL (120u * HZ) #define GC_SCAN_MAX_DURATION msecs_to_jiffies(10) -#define MAX_CHAINLEN 64u +#define MIN_CHAINLEN 8u +#define MAX_CHAINLEN (32u - MIN_CHAINLEN) static struct conntrack_gc_work conntrack_gc_work; @@ -842,6 +843,7 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) unsigned int hash, reply_hash; struct nf_conntrack_tuple_hash *h; struct hlist_nulls_node *n; + unsigned int max_chainlen; unsigned int chainlen = 0; unsigned int sequence; int err = -EEXIST; @@ -857,13 +859,15 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) &ct->tuplehash[IP_CT_DIR_REPLY].tuple); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); + max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); + /* See if there's one in the list already, including reverse */ hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode) { if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -873,7 +877,7 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -1103,8 +1107,8 @@ drop: int __nf_conntrack_confirm(struct sk_buff *skb) { + unsigned int chainlen = 0, sequence, max_chainlen; const struct nf_conntrack_zone *zone; - unsigned int chainlen = 0, sequence; unsigned int hash, reply_hash; struct nf_conntrack_tuple_hash *h; struct nf_conn *ct; @@ -1168,6 +1172,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) goto dying; } + max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); /* See if there's one in the list already, including reverse: NAT could have grabbed it without realizing, since we're not in the hash. If there is, we lost race. */ @@ -1175,7 +1180,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -1184,7 +1189,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) { + if (chainlen++ > max_chainlen) { chaintoolong: nf_ct_add_to_dying_list(ct); NF_CT_STAT_INC(net, chaintoolong); -- cgit v1.2.3 From b16ac3c4c886f323b06ae942f02ebd2a70bf8840 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:36 +0200 Subject: netfilter: conntrack: include zone id in tuple hash again commit deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones") removed the zone id from the hash value. This has implications on hash chain lengths with overlapping tuples, which can hit 64k entries on released kernels, before upper droplimit was added in d7e7747ac5c ("netfilter: refuse insertion if chain has grown too large"). With that change reverted, test script coming with this series shows linear insertion time growth: 10000 entries in 3737 ms (now 10000 total, loop 1) 10000 entries in 16994 ms (now 20000 total, loop 2) 10000 entries in 47787 ms (now 30000 total, loop 3) 10000 entries in 72731 ms (now 40000 total, loop 4) 10000 entries in 95761 ms (now 50000 total, loop 5) 10000 entries in 96809 ms (now 60000 total, loop 6) inserted 60000 entries from packet path in 333825 ms With d7e7747ac5c in place, the test fails. There are three supported zone use cases: 1. Connection is in the default zone (zone 0). This means to special config (the default). 2. Connection is in a different zone (1 to 2**16). This means rules are in place to put packets in the desired zone, e.g. derived from vlan id or interface. 3. Original direction is in zone X and Reply is in zone 0. 3) allows to use of the existing NAT port collision avoidance to provide connectivity to internet/wan even when the various zones have overlapping source networks separated via policy routing. In case the original zone is 0 all three cases are identical. There is no way to place original direction in zone x and reply in zone y (with y != 0). Zones need to be assigned manually via the iptables/nftables ruleset, before conntrack lookup occurs (raw table in iptables) using the "CT" target conntrack template support (-j CT --{zone,zone-orig,zone-reply} X). Normally zone assignment happens based on incoming interface, but could also be derived from packet mark, vlan id and so on. This means that when case 3 is used, the ruleset will typically not even assign a connection tracking template to the "reply" packets, so lookup happens in zone 0. However, it is possible that reply packets also match a ct zone assignment rule which sets up a template for zone X (X > 0) in original direction only. Therefore, after making the zone id part of the hash, we need to do a second lookup using the reply zone id if we did not find an entry on the first lookup. In practice, most deployments will either not use zones at all or the origin and reply zones are the same, no second lookup is required in either case. After this change, packet path insertion test passes with constant insertion times: 10000 entries in 1064 ms (now 10000 total, loop 1) 10000 entries in 1074 ms (now 20000 total, loop 2) 10000 entries in 1066 ms (now 30000 total, loop 3) 10000 entries in 1079 ms (now 40000 total, loop 4) 10000 entries in 1081 ms (now 50000 total, loop 5) 10000 entries in 1082 ms (now 60000 total, loop 6) inserted 60000 entries from packet path in 6452 ms Cc: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 67 ++++++++++++++++++++++++++++++--------- 1 file changed, 52 insertions(+), 15 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 91b7edaa635c..97b91d62589d 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -189,11 +189,13 @@ seqcount_spinlock_t nf_conntrack_generation __read_mostly; static siphash_key_t nf_conntrack_hash_rnd __read_mostly; static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple, + unsigned int zoneid, const struct net *net) { struct { struct nf_conntrack_man src; union nf_inet_addr dst_addr; + unsigned int zone; u32 net_mix; u16 dport; u16 proto; @@ -206,6 +208,7 @@ static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple, /* The direction must be ignored, so handle usable members manually. */ combined.src = tuple->src; combined.dst_addr = tuple->dst.u3; + combined.zone = zoneid; combined.net_mix = net_hash_mix(net); combined.dport = (__force __u16)tuple->dst.u.all; combined.proto = tuple->dst.protonum; @@ -220,15 +223,17 @@ static u32 scale_hash(u32 hash) static u32 __hash_conntrack(const struct net *net, const struct nf_conntrack_tuple *tuple, + unsigned int zoneid, unsigned int size) { - return reciprocal_scale(hash_conntrack_raw(tuple, net), size); + return reciprocal_scale(hash_conntrack_raw(tuple, zoneid, net), size); } static u32 hash_conntrack(const struct net *net, - const struct nf_conntrack_tuple *tuple) + const struct nf_conntrack_tuple *tuple, + unsigned int zoneid) { - return scale_hash(hash_conntrack_raw(tuple, net)); + return scale_hash(hash_conntrack_raw(tuple, zoneid, net)); } static bool nf_ct_get_tuple_ports(const struct sk_buff *skb, @@ -651,9 +656,11 @@ static void nf_ct_delete_from_lists(struct nf_conn *ct) do { sequence = read_seqcount_begin(&nf_conntrack_generation); hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_ORIGINAL)); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); clean_from_lists(ct); @@ -820,8 +827,20 @@ struct nf_conntrack_tuple_hash * nf_conntrack_find_get(struct net *net, const struct nf_conntrack_zone *zone, const struct nf_conntrack_tuple *tuple) { - return __nf_conntrack_find_get(net, zone, tuple, - hash_conntrack_raw(tuple, net)); + unsigned int rid, zone_id = nf_ct_zone_id(zone, IP_CT_DIR_ORIGINAL); + struct nf_conntrack_tuple_hash *thash; + + thash = __nf_conntrack_find_get(net, zone, tuple, + hash_conntrack_raw(tuple, zone_id, net)); + + if (thash) + return thash; + + rid = nf_ct_zone_id(zone, IP_CT_DIR_REPLY); + if (rid != zone_id) + return __nf_conntrack_find_get(net, zone, tuple, + hash_conntrack_raw(tuple, rid, net)); + return thash; } EXPORT_SYMBOL_GPL(nf_conntrack_find_get); @@ -854,9 +873,11 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) do { sequence = read_seqcount_begin(&nf_conntrack_generation); hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_ORIGINAL)); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); @@ -1137,8 +1158,8 @@ __nf_conntrack_confirm(struct sk_buff *skb) hash = *(unsigned long *)&ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev; hash = scale_hash(hash); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); - + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); /* We're not in hash table, and we refuse to set up related @@ -1251,7 +1272,7 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple, rcu_read_lock(); begin: nf_conntrack_get_ht(&ct_hash, &hsize); - hash = __hash_conntrack(net, tuple, hsize); + hash = __hash_conntrack(net, tuple, nf_ct_zone_id(zone, IP_CT_DIR_REPLY), hsize); hlist_nulls_for_each_entry_rcu(h, n, &ct_hash[hash], hnnode) { ct = nf_ct_tuplehash_to_ctrack(h); @@ -1692,8 +1713,8 @@ resolve_normal_ct(struct nf_conn *tmpl, struct nf_conntrack_tuple_hash *h; enum ip_conntrack_info ctinfo; struct nf_conntrack_zone tmp; + u32 hash, zone_id, rid; struct nf_conn *ct; - u32 hash; if (!nf_ct_get_tuple(skb, skb_network_offset(skb), dataoff, state->pf, protonum, state->net, @@ -1704,8 +1725,20 @@ resolve_normal_ct(struct nf_conn *tmpl, /* look for tuple match */ zone = nf_ct_zone_tmpl(tmpl, skb, &tmp); - hash = hash_conntrack_raw(&tuple, state->net); + + zone_id = nf_ct_zone_id(zone, IP_CT_DIR_ORIGINAL); + hash = hash_conntrack_raw(&tuple, zone_id, state->net); h = __nf_conntrack_find_get(state->net, zone, &tuple, hash); + + if (!h) { + rid = nf_ct_zone_id(zone, IP_CT_DIR_REPLY); + if (zone_id != rid) { + u32 tmp = hash_conntrack_raw(&tuple, rid, state->net); + + h = __nf_conntrack_find_get(state->net, zone, &tuple, tmp); + } + } + if (!h) { h = init_conntrack(state->net, tmpl, &tuple, skb, dataoff, hash); @@ -2542,12 +2575,16 @@ int nf_conntrack_hash_resize(unsigned int hashsize) for (i = 0; i < nf_conntrack_htable_size; i++) { while (!hlist_nulls_empty(&nf_conntrack_hash[i])) { + unsigned int zone_id; + h = hlist_nulls_entry(nf_conntrack_hash[i].first, struct nf_conntrack_tuple_hash, hnnode); ct = nf_ct_tuplehash_to_ctrack(h); hlist_nulls_del_rcu(&h->hnnode); + + zone_id = nf_ct_zone_id(nf_ct_zone(ct), NF_CT_DIRECTION(h)); bucket = __hash_conntrack(nf_ct_net(ct), - &h->tuple, hashsize); + &h->tuple, zone_id, hashsize); hlist_nulls_add_head_rcu(&h->hnnode, &hash[bucket]); } } -- cgit v1.2.3 From d2966dc77ba7b2678f7aee97bf9a65702ec8e2b6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:37 +0200 Subject: netfilter: nat: include zone id in nat table hash again Similar to the conntrack change, also use the zone id for the nat source lists if the zone id is valid in both directions. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c index 7008961f5cb0..273117683922 100644 --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -150,13 +150,16 @@ static void __nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl) /* We keep an extra hash for each conntrack, for fast searching. */ static unsigned int -hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) +hash_by_src(const struct net *net, + const struct nf_conntrack_zone *zone, + const struct nf_conntrack_tuple *tuple) { unsigned int hash; struct { struct nf_conntrack_man src; u32 net_mix; u32 protonum; + u32 zone; } __aligned(SIPHASH_ALIGNMENT) combined; get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd)); @@ -165,9 +168,13 @@ hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) /* Original src, to ensure we map it consistently if poss. */ combined.src = tuple->src; - combined.net_mix = net_hash_mix(n); + combined.net_mix = net_hash_mix(net); combined.protonum = tuple->dst.protonum; + /* Zone ID can be used provided its valid for both directions */ + if (zone->dir == NF_CT_DEFAULT_ZONE_DIR) + combined.zone = zone->id; + hash = siphash(&combined, sizeof(combined), &nf_nat_hash_rnd); return reciprocal_scale(hash, nf_nat_htable_size); @@ -272,7 +279,7 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range2 *range) { - unsigned int h = hash_by_src(net, tuple); + unsigned int h = hash_by_src(net, zone, tuple); const struct nf_conn *ct; hlist_for_each_entry_rcu(ct, &nf_nat_bysource[h], nat_bysource) { @@ -619,7 +626,7 @@ nf_nat_setup_info(struct nf_conn *ct, unsigned int srchash; spinlock_t *lock; - srchash = hash_by_src(net, + srchash = hash_by_src(net, nf_ct_zone(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); lock = &nf_nat_locks[srchash % CONNTRACK_LOCKS]; spin_lock_bh(lock); @@ -788,7 +795,7 @@ static void __nf_nat_cleanup_conntrack(struct nf_conn *ct) { unsigned int h; - h = hash_by_src(nf_ct_net(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + h = hash_by_src(nf_ct_net(ct), nf_ct_zone(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); spin_lock_bh(&nf_nat_locks[h % CONNTRACK_LOCKS]); hlist_del_rcu(&ct->nat_bysource); spin_unlock_bh(&nf_nat_locks[h % CONNTRACK_LOCKS]); -- cgit v1.2.3 From 0f1148abb226f3639845738cdf3d2534ceb1d059 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:38 +0200 Subject: selftests: netfilter: add selftest for directional zone support Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_nat_zones.sh | 309 +++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100755 tools/testing/selftests/netfilter/nft_nat_zones.sh diff --git a/tools/testing/selftests/netfilter/nft_nat_zones.sh b/tools/testing/selftests/netfilter/nft_nat_zones.sh new file mode 100755 index 000000000000..b9ab37380f33 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat_zones.sh @@ -0,0 +1,309 @@ +#!/bin/bash +# +# Test connection tracking zone and NAT source port reallocation support. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# Don't increase too much, 2000 clients should work +# just fine but script can then take several minutes with +# KASAN/debug builds. +maxclients=100 + +have_iperf=1 +ret=0 + +# client1---. +# veth1-. +# | +# NAT Gateway --veth0--> Server +# | | +# veth2-' | +# client2---' | +# .... | +# clientX----vethX---' + +# All clients share identical IP address. +# NAT Gateway uses policy routing and conntrack zones to isolate client +# namespaces. Each client connects to Server, each with colliding tuples: +# clientsaddr:10000 -> serveraddr:dport +# NAT Gateway is supposed to do port reallocation for each of the +# connections. + +sfx=$(mktemp -u "XXXXXXXX") +gw="ns-gw-$sfx" +cl1="ns-cl1-$sfx" +cl2="ns-cl2-$sfx" +srv="ns-srv-$sfx" + +v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null) +v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null) +v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null) +v6gc1=$(sysctl -n net.ipv6.neigh.default.gc_thresh1 2>/dev/null) +v6gc2=$(sysctl -n net.ipv6.neigh.default.gc_thresh2 2>/dev/null) +v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null) + +cleanup() +{ + ip netns del $gw + ip netns del $srv + for i in $(seq 1 $maxclients); do + ip netns del ns-cl$i-$sfx 2>/dev/null + done + + sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +conntrack -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without conntrack tool" + exit $ksft_skip +fi + +iperf3 -v >/dev/null 2>&1 +if [ $? -ne 0 ];then + have_iperf=0 +fi + +ip netns add "$gw" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $gw" + exit $ksft_skip +fi +ip -net "$gw" link set lo up + +trap cleanup EXIT + +ip netns add "$srv" +if [ $? -ne 0 ];then + echo "SKIP: Could not create server netns $srv" + exit $ksft_skip +fi + +ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv" +ip -net "$gw" link set veth0 up +ip -net "$srv" link set lo up +ip -net "$srv" link set eth0 up + +sysctl -q net.ipv6.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh3=4096 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + + ip netns add "$cl" + if [ $? -ne 0 ];then + echo "SKIP: Could not create client netns $cl" + exit $ksft_skip + fi + ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip + fi +done + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + echo netns exec "$cl" ip link set lo up + echo netns exec "$cl" ip link set eth0 up + echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2 + echo netns exec "$gw" ip link set veth$i up + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2 + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0 + + # clients have same IP addresses. + echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0 + echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 + echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0 + echo netns exec "$cl" ip route add default via dead:1::2 dev eth0 + + # NB: same addresses on client-facing interfaces. + echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i + echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i + + # gw: policy routing + echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i)) +done | ip -batch /dev/stdin + +ip -net "$gw" addr add 10.3.0.1/24 dev veth0 +ip -net "$gw" addr add dead:3::1/64 dev veth0 + +ip -net "$srv" addr add 10.3.0.99/24 dev eth0 +ip -net "$srv" addr add dead:3::99/64 dev eth0 + +ip netns exec $gw nft -f /dev/stdin< /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null + +# useful for debugging: allows to use 'ping' from clients to gateway. +ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null + +for i in $(seq 1 $maxclients); do + cl="ns-cl$i-$sfx" + ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 & + if [ $? -ne 0 ]; then + echo FAIL: Ping failure from $cl 1>&2 + ret=1 + break + fi +done + +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }" + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth$i" 1>&2 + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2 + break + fi +done + +ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" + ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2 +fi + +if [ $ret -eq 0 ]; then + echo "PASS: ping test from all $maxclients namespaces" +fi + +if [ $have_iperf -eq 0 ];then + echo "SKIP: iperf3 not installed" + if [ $ret -ne 0 ];then + exit $ret + fi + exit $ksft_skip +fi + +ip netns exec $srv iperf3 -s > /dev/null 2>&1 & +iperfpid=$! +sleep 1 + +for i in $(seq 1 $maxclients); do + if [ $ret -ne 0 ]; then + break + fi + cl="ns-cl$i-$sfx" + ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null + if [ $? -ne 0 ]; then + echo FAIL: Failure to connect for $cl 1>&2 + ip netns exec $gw conntrack -S 1>&2 + ret=1 + fi +done +if [ $ret -eq 0 ];then + echo "PASS: iperf3 connections for all $maxclients net namespaces" +fi + +kill $iperfpid +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: can't find expected tcp entry for veth$i" 1>&2 + break + fi +done +if [ $ret -eq 0 ];then + echo "PASS: Found client connection for all $maxclients net namespaces" +fi + +ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: cannot find return entry on veth0" 1>&2 +fi + +exit $ret -- cgit v1.2.3 From cb89f63ba662d2b56583f4dd3dd2b7f03b6d6587 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:39 +0200 Subject: selftests: netfilter: add zone stress test with colliding tuples Add 20k entries to the connection tracking table, once from the data plane, once via ctnetlink. In both cases, each entry lives in a different conntrack zone and addresses/ports are identical. Expectation is that insertions work and occurs in constant time: PASS: added 10000 entries in 1215 ms (now 10000 total, loop 1) PASS: added 10000 entries in 1214 ms (now 20000 total, loop 2) PASS: inserted 20000 entries from packet path in 2434 ms total PASS: added 10000 entries in 57631 ms (now 10000 total) PASS: added 10000 entries in 58572 ms (now 20000 total) PASS: inserted 20000 entries via ctnetlink in 116205 ms Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- .../testing/selftests/netfilter/nft_zones_many.sh | 156 +++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100755 tools/testing/selftests/netfilter/nft_zones_many.sh diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh new file mode 100755 index 000000000000..ac646376eb01 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_zones_many.sh @@ -0,0 +1,156 @@ +#!/bin/bash + +# Test insertion speed for packets with identical addresses/ports +# that are all placed in distinct conntrack zones. + +sfx=$(mktemp -u "XXXXXXXX") +ns="ns-$sfx" + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +zones=20000 +have_ct_tool=0 +ret=0 + +cleanup() +{ + ip netns del $ns +} + +ip netns add $ns +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $gw" + exit $ksft_skip +fi + +trap cleanup EXIT + +conntrack -V > /dev/null 2>&1 +if [ $? -eq 0 ];then + have_ct_tool=1 +fi + +ip -net "$ns" link set lo up + +test_zones() { + local max_zones=$1 + +ip netns exec $ns sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600 +ip netns exec $ns nft -f /dev/stdin</dev/null | ip netns exec "$ns" nc -w 1 -q 1 -u -p 12345 127.0.0.1 12345 > /dev/null + if [ $? -ne 0 ] ;then + ret=1 + break + fi + + stop=$(date +%s%3N) + local duration=$((stop-start)) + echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)" + done + + if [ $have_ct_tool -eq 1 ]; then + local count=$(ip netns exec "$ns" conntrack -C) + local duration=$((stop-outerstart)) + + if [ $count -eq $max_zones ]; then + echo "PASS: inserted $count entries from packet path in $duration ms total" + else + ip netns exec $ns conntrack -S 1>&2 + echo "FAIL: inserted $count entries from packet path in $duration ms total, expected $max_zones entries" + ret=1 + fi + fi + + if [ $ret -ne 0 ];then + echo "FAIL: insert $max_zones entries from packet path" 1>&2 + fi +} + +test_conntrack_tool() { + local max_zones=$1 + + ip netns exec $ns conntrack -F >/dev/null 2>/dev/null + + local outerstart=$(date +%s%3N) + local start=$(date +%s%3N) + local stop=$start + local i=0 + while [ $i -lt $max_zones ]; do + i=$((i + 1)) + ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i >/dev/null 2>&1 + if [ $? -ne 0 ];then + ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i > /dev/null + echo "FAIL: conntrack -I returned an error" + ret=1 + break + fi + + if [ $((i%10000)) -eq 0 ];then + stop=$(date +%s%3N) + + local duration=$((stop-start)) + echo "PASS: added 10000 entries in $duration ms (now $i total)" + start=$stop + fi + done + + local count=$(ip netns exec "$ns" conntrack -C) + local duration=$((stop-outerstart)) + + if [ $count -eq $max_zones ]; then + echo "PASS: inserted $count entries via ctnetlink in $duration ms" + else + ip netns exec $ns conntrack -S 1>&2 + echo "FAIL: inserted $count entries via ctnetlink in $duration ms, expected $max_zones entries ($duration ms)" + ret=1 + fi +} + +test_zones $zones + +if [ $have_ct_tool -eq 1 ];then + test_conntrack_tool $zones +else + echo "SKIP: Could not run ctnetlink insertion test without conntrack tool" + if [ $ret -eq 0 ];then + exit $ksft_skip + fi +fi + +exit $ret -- cgit v1.2.3 From a499b03bf36b0c2e3b958a381d828678ab0ffc5e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 13 Sep 2021 14:42:33 +0200 Subject: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space. Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership") Reported-and-tested-by: syzbot+f31660cf279b0557160c@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 081437dd75b7..33e771cd847c 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9599,7 +9599,6 @@ static void __nft_release_table(struct net *net, struct nft_table *table) table->use--; nf_tables_chain_destroy(&ctx); } - list_del(&table->list); nf_tables_table_destroy(&ctx); } @@ -9612,6 +9611,8 @@ static void __nft_release_tables(struct net *net) if (nft_table_has_owner(table)) continue; + list_del(&table->list); + __nft_release_table(net, table); } } @@ -9619,31 +9620,38 @@ static void __nft_release_tables(struct net *net) static int nft_rcv_nl_event(struct notifier_block *this, unsigned long event, void *ptr) { + struct nft_table *table, *to_delete[8]; struct nftables_pernet *nft_net; struct netlink_notify *n = ptr; - struct nft_table *table, *nt; struct net *net = n->net; - bool release = false; + unsigned int deleted; + bool restart = false; if (event != NETLINK_URELEASE || n->protocol != NETLINK_NETFILTER) return NOTIFY_DONE; nft_net = nft_pernet(net); + deleted = 0; mutex_lock(&nft_net->commit_mutex); +again: list_for_each_entry(table, &nft_net->tables, list) { if (nft_table_has_owner(table) && n->portid == table->nlpid) { __nft_release_hook(net, table); - release = true; + list_del_rcu(&table->list); + to_delete[deleted++] = table; + if (deleted >= ARRAY_SIZE(to_delete)) + break; } } - if (release) { + if (deleted) { + restart = deleted >= ARRAY_SIZE(to_delete); synchronize_rcu(); - list_for_each_entry_safe(table, nt, &nft_net->tables, list) { - if (nft_table_has_owner(table) && - n->portid == table->nlpid) - __nft_release_table(net, table); - } + while (deleted) + __nft_release_table(net, to_delete[--deleted]); + + if (restart) + goto again; } mutex_unlock(&nft_net->commit_mutex); -- cgit v1.2.3 From 45928afe94a094bcda9af858b96673d59bc4a0e9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 13 Sep 2021 20:38:52 +0200 Subject: netfilter: nf_tables: Fix oversized kvmalloc() calls The commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") limits the max allocatable memory via kvmalloc() to MAX_INT. Reported-by: syzbot+cd43695a64bcd21b8596@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 33e771cd847c..b9546defdc28 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4336,7 +4336,7 @@ static int nf_tables_newset(struct sk_buff *skb, const struct nfnl_info *info, if (ops->privsize != NULL) size = ops->privsize(nla, &desc); alloc_size = sizeof(*set) + size + udlen; - if (alloc_size < size) + if (alloc_size < size || alloc_size > INT_MAX) return -ENOMEM; set = kvzalloc(alloc_size, GFP_KERNEL); if (!set) -- cgit v1.2.3 From 30db406923b9285a9bac06a6af5e74bd6d0f1d06 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 15 Sep 2021 16:46:38 +0200 Subject: netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic masq_inet6_event is called asynchronously from system work queue, because the inet6 notifier is atomic and nf_iterate_cleanup can sleep. The ipv4 and device notifiers call nf_iterate_cleanup directly. This is legal, but these notifiers are called with RTNL mutex held. A large conntrack table with many devices coming and going will have severe impact on the system usability, with 'ip a' blocking for several seconds. This change places the defer code into a helper and makes it more generic so ipv4 and ifdown notifiers can be converted to defer the cleanup walk as well in a follow patch. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_masquerade.c | 122 +++++++++++++++++++++++--------------- 1 file changed, 75 insertions(+), 47 deletions(-) diff --git a/net/netfilter/nf_nat_masquerade.c b/net/netfilter/nf_nat_masquerade.c index 8e8a65d46345..415919a6ac1a 100644 --- a/net/netfilter/nf_nat_masquerade.c +++ b/net/netfilter/nf_nat_masquerade.c @@ -9,8 +9,19 @@ #include +struct masq_dev_work { + struct work_struct work; + struct net *net; + union nf_inet_addr addr; + int ifindex; + int (*iter)(struct nf_conn *i, void *data); +}; + +#define MAX_MASQ_WORKER_COUNT 16 + static DEFINE_MUTEX(masq_mutex); static unsigned int masq_refcnt __read_mostly; +static atomic_t masq_worker_count __read_mostly; unsigned int nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum, @@ -63,6 +74,63 @@ nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4); +static void iterate_cleanup_work(struct work_struct *work) +{ + struct masq_dev_work *w; + + w = container_of(work, struct masq_dev_work, work); + + nf_ct_iterate_cleanup_net(w->net, w->iter, (void *)w, 0, 0); + + put_net(w->net); + kfree(w); + atomic_dec(&masq_worker_count); + module_put(THIS_MODULE); +} + +/* Iterate conntrack table in the background and remove conntrack entries + * that use the device/address being removed. + * + * In case too many work items have been queued already or memory allocation + * fails iteration is skipped, conntrack entries will time out eventually. + */ +static void nf_nat_masq_schedule(struct net *net, union nf_inet_addr *addr, + int ifindex, + int (*iter)(struct nf_conn *i, void *data), + gfp_t gfp_flags) +{ + struct masq_dev_work *w; + + if (atomic_read(&masq_worker_count) > MAX_MASQ_WORKER_COUNT) + return; + + net = maybe_get_net(net); + if (!net) + return; + + if (!try_module_get(THIS_MODULE)) + goto err_module; + + w = kzalloc(sizeof(*w), gfp_flags); + if (w) { + /* We can overshoot MAX_MASQ_WORKER_COUNT, no big deal */ + atomic_inc(&masq_worker_count); + + INIT_WORK(&w->work, iterate_cleanup_work); + w->ifindex = ifindex; + w->net = net; + w->iter = iter; + if (addr) + w->addr = *addr; + schedule_work(&w->work); + return; + } + + module_put(THIS_MODULE); + err_module: + put_net(net); +} + static int device_cmp(struct nf_conn *i, void *ifindex) { const struct nf_conn_nat *nat = nfct_nat(i); @@ -136,8 +204,6 @@ static struct notifier_block masq_inet_notifier = { }; #if IS_ENABLED(CONFIG_IPV6) -static atomic_t v6_worker_count __read_mostly; - static int nat_ipv6_dev_get_saddr(struct net *net, const struct net_device *dev, const struct in6_addr *daddr, unsigned int srcprefs, @@ -187,13 +253,6 @@ nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6); -struct masq_dev_work { - struct work_struct work; - struct net *net; - struct in6_addr addr; - int ifindex; -}; - static int inet6_cmp(struct nf_conn *ct, void *work) { struct masq_dev_work *w = (struct masq_dev_work *)work; @@ -204,21 +263,7 @@ static int inet6_cmp(struct nf_conn *ct, void *work) tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - return ipv6_addr_equal(&w->addr, &tuple->dst.u3.in6); -} - -static void iterate_cleanup_work(struct work_struct *work) -{ - struct masq_dev_work *w; - - w = container_of(work, struct masq_dev_work, work); - - nf_ct_iterate_cleanup_net(w->net, inet6_cmp, (void *)w, 0, 0); - - put_net(w->net); - kfree(w); - atomic_dec(&v6_worker_count); - module_put(THIS_MODULE); + return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); } /* atomic notifier; can't call nf_ct_iterate_cleanup_net (it can sleep). @@ -233,36 +278,19 @@ static int masq_inet6_event(struct notifier_block *this, { struct inet6_ifaddr *ifa = ptr; const struct net_device *dev; - struct masq_dev_work *w; - struct net *net; + union nf_inet_addr addr; - if (event != NETDEV_DOWN || atomic_read(&v6_worker_count) >= 16) + if (event != NETDEV_DOWN) return NOTIFY_DONE; dev = ifa->idev->dev; - net = maybe_get_net(dev_net(dev)); - if (!net) - return NOTIFY_DONE; - if (!try_module_get(THIS_MODULE)) - goto err_module; + memset(&addr, 0, sizeof(addr)); - w = kmalloc(sizeof(*w), GFP_ATOMIC); - if (w) { - atomic_inc(&v6_worker_count); + addr.in6 = ifa->addr; - INIT_WORK(&w->work, iterate_cleanup_work); - w->ifindex = dev->ifindex; - w->net = net; - w->addr = ifa->addr; - schedule_work(&w->work); - - return NOTIFY_DONE; - } - - module_put(THIS_MODULE); - err_module: - put_net(net); + nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet6_cmp, + GFP_ATOMIC); return NOTIFY_DONE; } -- cgit v1.2.3 From 7970a19b71044bf4dc2c1becc200275bdf1884d4 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 15 Sep 2021 16:46:39 +0200 Subject: netfilter: nf_nat_masquerade: defer conntrack walk to work queue The ipv4 and device notifiers are called with RTNL mutex held. The table walk can take some time, better not block other RTNL users. 'ip a' has been reported to block for up to 20 seconds when conntrack table has many entries and device down events are frequent (e.g., PPP). Reported-and-tested-by: Martin Zaharinov Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_masquerade.c | 50 +++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 26 deletions(-) diff --git a/net/netfilter/nf_nat_masquerade.c b/net/netfilter/nf_nat_masquerade.c index 415919a6ac1a..acd73f717a08 100644 --- a/net/netfilter/nf_nat_masquerade.c +++ b/net/netfilter/nf_nat_masquerade.c @@ -131,13 +131,14 @@ static void nf_nat_masq_schedule(struct net *net, union nf_inet_addr *addr, put_net(net); } -static int device_cmp(struct nf_conn *i, void *ifindex) +static int device_cmp(struct nf_conn *i, void *arg) { const struct nf_conn_nat *nat = nfct_nat(i); + const struct masq_dev_work *w = arg; if (!nat) return 0; - return nat->masq_index == (int)(long)ifindex; + return nat->masq_index == w->ifindex; } static int masq_device_event(struct notifier_block *this, @@ -153,8 +154,8 @@ static int masq_device_event(struct notifier_block *this, * and forget them. */ - nf_ct_iterate_cleanup_net(net, device_cmp, - (void *)(long)dev->ifindex, 0, 0); + nf_nat_masq_schedule(net, NULL, dev->ifindex, + device_cmp, GFP_KERNEL); } return NOTIFY_DONE; @@ -162,35 +163,45 @@ static int masq_device_event(struct notifier_block *this, static int inet_cmp(struct nf_conn *ct, void *ptr) { - struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; - struct net_device *dev = ifa->ifa_dev->dev; struct nf_conntrack_tuple *tuple; + struct masq_dev_work *w = ptr; - if (!device_cmp(ct, (void *)(long)dev->ifindex)) + if (!device_cmp(ct, ptr)) return 0; tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - return ifa->ifa_address == tuple->dst.u3.ip; + return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); } static int masq_inet_event(struct notifier_block *this, unsigned long event, void *ptr) { - struct in_device *idev = ((struct in_ifaddr *)ptr)->ifa_dev; - struct net *net = dev_net(idev->dev); + const struct in_ifaddr *ifa = ptr; + const struct in_device *idev; + const struct net_device *dev; + union nf_inet_addr addr; + + if (event != NETDEV_DOWN) + return NOTIFY_DONE; /* The masq_dev_notifier will catch the case of the device going * down. So if the inetdev is dead and being destroyed we have * no work to do. Otherwise this is an individual address removal * and we have to perform the flush. */ + idev = ifa->ifa_dev; if (idev->dead) return NOTIFY_DONE; - if (event == NETDEV_DOWN) - nf_ct_iterate_cleanup_net(net, inet_cmp, ptr, 0, 0); + memset(&addr, 0, sizeof(addr)); + + addr.ip = ifa->ifa_address; + + dev = idev->dev; + nf_nat_masq_schedule(dev_net(idev->dev), &addr, dev->ifindex, + inet_cmp, GFP_KERNEL); return NOTIFY_DONE; } @@ -253,19 +264,6 @@ nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6); -static int inet6_cmp(struct nf_conn *ct, void *work) -{ - struct masq_dev_work *w = (struct masq_dev_work *)work; - struct nf_conntrack_tuple *tuple; - - if (!device_cmp(ct, (void *)(long)w->ifindex)) - return 0; - - tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - - return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); -} - /* atomic notifier; can't call nf_ct_iterate_cleanup_net (it can sleep). * * Defer it to the system workqueue. @@ -289,7 +287,7 @@ static int masq_inet6_event(struct notifier_block *this, addr.in6 = ifa->addr; - nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet6_cmp, + nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet_cmp, GFP_ATOMIC); return NOTIFY_DONE; } -- cgit v1.2.3 From cc8072153aafd65bff1b3679a112cb6ba71ab375 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 Sep 2021 11:56:25 +0200 Subject: netfilter: iptable_raw: drop bogus net_init annotation This is a leftover from the times when this function was wired up via pernet_operations. Now its called when userspace asks for the table. With CONFIG_NET_NS=n, iptable_raw_table_init memory has been discarded already and we get a kernel crash. Other tables are fine, __net_init annotation was removed already. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: youling 257 Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/iptable_raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c index b88e0f36cd05..8265c6765705 100644 --- a/net/ipv4/netfilter/iptable_raw.c +++ b/net/ipv4/netfilter/iptable_raw.c @@ -42,7 +42,7 @@ iptable_raw_hook(void *priv, struct sk_buff *skb, static struct nf_hook_ops *rawtable_ops __read_mostly; -static int __net_init iptable_raw_table_init(struct net *net) +static int iptable_raw_table_init(struct net *net) { struct ipt_replace *repl; const struct xt_table *table = &packet_raw; -- cgit v1.2.3 From b53deef054e58fe4f37c66211b8ece9f8fc1aa13 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 Sep 2021 18:50:17 +0200 Subject: netfilter: log: work around missing softdep backend module iptables/nftables has two types of log modules: 1. backend, e.g. nf_log_syslog, which implement the functionality 2. frontend, e.g. xt_LOG or nft_log, which call the functionality provided by backend based on nf_tables or xtables rule set. Problem is that the request_module() call to load the backed in nf_logger_find_get() might happen with nftables transaction mutex held in case the call path is via nf_tables/nft_compat. This can cause deadlocks (see 'Fixes' tags for details). The chosen solution as to let modprobe deal with this by adding 'pre: ' soft dep tag to xt_LOG (to load the syslog backend) and xt_NFLOG (to load nflog backend). Eric reports that this breaks on systems with older modprobe that doesn't support softdeps. Another, similar issue occurs when someone either insmods xt_(NF)LOG directly or unloads the backend module (possible if no log frontend is in use): because the frontend module is already loaded, modprobe is not invoked again so the softdep isn't evaluated. Add a workaround: If nf_logger_find_get() returns -ENOENT and call is not via nft_compat, load the backend explicitly and try again. Else, let nft_compat ask for deferred request_module via nf_tables infra. Softdeps are kept in-place, so with newer modprobe the dependencies are resolved from userspace. Fixes: cefa31a9d461 ("netfilter: nft_log: perform module load from nf_tables") Fixes: a38b5b56d6f4 ("netfilter: nf_log: add module softdeps") Reported-and-tested-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_compat.c | 17 ++++++++++++++++- net/netfilter/xt_LOG.c | 10 +++++++++- net/netfilter/xt_NFLOG.c | 10 +++++++++- 3 files changed, 34 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 272bcdb1392d..f69cc73c5813 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -19,6 +19,7 @@ #include #include #include +#include /* Used for matches where *info is larger than X byte */ #define NFT_MATCH_LARGE_THRESH 192 @@ -257,8 +258,22 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr, nft_compat_wait_for_destructors(); ret = xt_check_target(&par, size, proto, inv); - if (ret < 0) + if (ret < 0) { + if (ret == -ENOENT) { + const char *modname = NULL; + + if (strcmp(target->name, "LOG") == 0) + modname = "nf_log_syslog"; + else if (strcmp(target->name, "NFLOG") == 0) + modname = "nfnetlink_log"; + + if (modname && + nft_request_module(ctx->net, "%s", modname) == -EAGAIN) + return -EAGAIN; + } + return ret; + } /* The standard target cannot be used */ if (!target->target) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 2ff75f7637b0..f39244f9c0ed 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -44,6 +44,7 @@ log_tg(struct sk_buff *skb, const struct xt_action_param *par) static int log_tg_check(const struct xt_tgchk_param *par) { const struct xt_log_info *loginfo = par->targinfo; + int ret; if (par->family != NFPROTO_IPV4 && par->family != NFPROTO_IPV6) return -EINVAL; @@ -58,7 +59,14 @@ static int log_tg_check(const struct xt_tgchk_param *par) return -EINVAL; } - return nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + if (ret != 0 && !par->nft_compat) { + request_module("%s", "nf_log_syslog"); + + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + } + + return ret; } static void log_tg_destroy(const struct xt_tgdtor_param *par) diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c index fb5793208059..e660c3710a10 100644 --- a/net/netfilter/xt_NFLOG.c +++ b/net/netfilter/xt_NFLOG.c @@ -42,13 +42,21 @@ nflog_tg(struct sk_buff *skb, const struct xt_action_param *par) static int nflog_tg_check(const struct xt_tgchk_param *par) { const struct xt_nflog_info *info = par->targinfo; + int ret; if (info->flags & ~XT_NFLOG_MASK) return -EINVAL; if (info->prefix[sizeof(info->prefix) - 1] != '\0') return -EINVAL; - return nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + if (ret != 0 && !par->nft_compat) { + request_module("%s", "nfnetlink_log"); + + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + } + + return ret; } static void nflog_tg_destroy(const struct xt_tgdtor_param *par) -- cgit v1.2.3 From e9edc188fc76499b0b9bd60364084037f6d03773 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Sep 2021 15:15:56 -0700 Subject: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by syz-executor.5/10178: 1 lock held by syz-executor.4/10217: Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 70 +++++++++++++++++++++------------------ 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 97b91d62589d..770a63103c7a 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -74,6 +74,9 @@ static __read_mostly struct kmem_cache *nf_conntrack_cachep; static DEFINE_SPINLOCK(nf_conntrack_locks_all_lock); static __read_mostly bool nf_conntrack_locks_all; +/* serialize hash resizes and nf_ct_iterate_cleanup */ +static DEFINE_MUTEX(nf_conntrack_mutex); + #define GC_SCAN_INTERVAL (120u * HZ) #define GC_SCAN_MAX_DURATION msecs_to_jiffies(10) @@ -2263,28 +2266,31 @@ get_next_corpse(int (*iter)(struct nf_conn *i, void *data), spinlock_t *lockp; for (; *bucket < nf_conntrack_htable_size; (*bucket)++) { + struct hlist_nulls_head *hslot = &nf_conntrack_hash[*bucket]; + + if (hlist_nulls_empty(hslot)) + continue; + lockp = &nf_conntrack_locks[*bucket % CONNTRACK_LOCKS]; local_bh_disable(); nf_conntrack_lock(lockp); - if (*bucket < nf_conntrack_htable_size) { - hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[*bucket], hnnode) { - if (NF_CT_DIRECTION(h) != IP_CT_DIR_REPLY) - continue; - /* All nf_conn objects are added to hash table twice, one - * for original direction tuple, once for the reply tuple. - * - * Exception: In the IPS_NAT_CLASH case, only the reply - * tuple is added (the original tuple already existed for - * a different object). - * - * We only need to call the iterator once for each - * conntrack, so we just use the 'reply' direction - * tuple while iterating. - */ - ct = nf_ct_tuplehash_to_ctrack(h); - if (iter(ct, data)) - goto found; - } + hlist_nulls_for_each_entry(h, n, hslot, hnnode) { + if (NF_CT_DIRECTION(h) != IP_CT_DIR_REPLY) + continue; + /* All nf_conn objects are added to hash table twice, one + * for original direction tuple, once for the reply tuple. + * + * Exception: In the IPS_NAT_CLASH case, only the reply + * tuple is added (the original tuple already existed for + * a different object). + * + * We only need to call the iterator once for each + * conntrack, so we just use the 'reply' direction + * tuple while iterating. + */ + ct = nf_ct_tuplehash_to_ctrack(h); + if (iter(ct, data)) + goto found; } spin_unlock(lockp); local_bh_enable(); @@ -2302,26 +2308,20 @@ found: static void nf_ct_iterate_cleanup(int (*iter)(struct nf_conn *i, void *data), void *data, u32 portid, int report) { - unsigned int bucket = 0, sequence; + unsigned int bucket = 0; struct nf_conn *ct; might_sleep(); - for (;;) { - sequence = read_seqcount_begin(&nf_conntrack_generation); - - while ((ct = get_next_corpse(iter, data, &bucket)) != NULL) { - /* Time to push up daises... */ + mutex_lock(&nf_conntrack_mutex); + while ((ct = get_next_corpse(iter, data, &bucket)) != NULL) { + /* Time to push up daises... */ - nf_ct_delete(ct, portid, report); - nf_ct_put(ct); - cond_resched(); - } - - if (!read_seqcount_retry(&nf_conntrack_generation, sequence)) - break; - bucket = 0; + nf_ct_delete(ct, portid, report); + nf_ct_put(ct); + cond_resched(); } + mutex_unlock(&nf_conntrack_mutex); } struct iter_data { @@ -2557,8 +2557,10 @@ int nf_conntrack_hash_resize(unsigned int hashsize) if (!hash) return -ENOMEM; + mutex_lock(&nf_conntrack_mutex); old_size = nf_conntrack_htable_size; if (old_size == hashsize) { + mutex_unlock(&nf_conntrack_mutex); kvfree(hash); return 0; } @@ -2598,6 +2600,8 @@ int nf_conntrack_hash_resize(unsigned int hashsize) nf_conntrack_all_unlock(); local_bh_enable(); + mutex_unlock(&nf_conntrack_mutex); + synchronize_net(); kvfree(old_hash); return 0; -- cgit v1.2.3 From 91dab18f0df171984688d0da258c4c9d95836416 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 12:28:34 +0200 Subject: MAINTAINERS: Move Daniel Drake to credits Daniel Drake's @gentoo.org email bounces (is listed as retired Gentoo developer) and there was no activity from him regarding zd1211rw driver. Also his second address @laptop.org bounces. Cc: Daniel Drake Signed-off-by: Krzysztof Kozlowski Acked-by: Greg Kroah-Hartman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210917102834.25649-1-krzysztof.kozlowski@canonical.com --- CREDITS | 1 + MAINTAINERS | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/CREDITS b/CREDITS index 7ef7b136e71d..d8f63e8329e8 100644 --- a/CREDITS +++ b/CREDITS @@ -971,6 +971,7 @@ D: PowerPC N: Daniel Drake E: dsd@gentoo.org D: USBAT02 CompactFlash support in usb-storage +D: ZD1211RW wireless driver S: UK N: Oleg Drokin diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..7dc658df9e00 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17800,7 +17800,6 @@ F: drivers/staging/nvec/ STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON) M: Jens Frederich -M: Daniel Drake M: Jon Nettleton S: Maintained W: http://wiki.laptop.org/go/DCON @@ -20704,7 +20703,6 @@ S: Maintained F: mm/zbud.c ZD1211RW WIRELESS DRIVER -M: Daniel Drake M: Ulrich Kunitz L: linux-wireless@vger.kernel.org L: zd1211-devs@lists.sourceforge.net (subscribers-only) -- cgit v1.2.3 From af505cad9567f7a500d34bf183696d570d7f6810 Mon Sep 17 00:00:00 2001 From: Nirmoy Das Date: Thu, 2 Sep 2021 12:29:17 +0200 Subject: debugfs: debugfs_create_file_size(): use IS_ERR to check for error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit debugfs_create_file() returns encoded error so use IS_ERR for checking return value. Reviewed-by: Christian König Signed-off-by: Nirmoy Das Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Cc: stable References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Link: https://lore.kernel.org/r/20210902102917.2233-1-nirmoy.das@amd.com Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 8129a430d789..2f117c57160d 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -528,7 +528,7 @@ void debugfs_create_file_size(const char *name, umode_t mode, { struct dentry *de = debugfs_create_file(name, mode, parent, data, fops); - if (de) + if (!IS_ERR(de)) d_inode(de)->i_size = file_size; } EXPORT_SYMBOL_GPL(debugfs_create_file_size); -- cgit v1.2.3 From 555f66d0f8a38537456acc77043d0e4469fcbe8e Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Tue, 14 Sep 2021 11:20:06 +0200 Subject: nvme-fc: update hardware queues before using them In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first. If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress. Signed-off-by: Daniel Wagner Reviewed-by: Ming Lei Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Reviewed-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b08a61ca283f..b5d9a5507de5 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) if (ctrl->ctrl.queue_count == 1) return 0; - ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_free_io_queues; - - ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_delete_hw_queues; - if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", @@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) nvme_unfreeze(&ctrl->ctrl); } + ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_free_io_queues; + + ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_delete_hw_queues; + return 0; out_delete_hw_queues: -- cgit v1.2.3 From e5445dae29d25d7b03e0a10d3d4277a1d0c8119b Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 14 Sep 2021 11:20:07 +0200 Subject: nvme-fc: avoid race between time out and tear down To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by: James Smart Tested-by: Daniel Wagner Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Reviewed-by: Daniel Wagner Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b5d9a5507de5..6ebe68396712 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) */ if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->tag_set); @@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) * clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set); -- cgit v1.2.3 From bdaa1365667103e7a754e87c08b846a979ce322b Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 14 Sep 2021 11:20:08 +0200 Subject: nvme-fc: remove freeze/unfreeze around update_nr_hw_queues Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by: James Smart [dwagner: added explanation why no IO is pending] Signed-off-by: Daniel Wagner Reviewed-by: Ming Lei Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 6ebe68396712..aa14ad963d91 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", prior_ioq_cnt, nr_io_queues); - nvme_wait_freeze(&ctrl->ctrl); blk_mq_update_nr_hw_queues(&ctrl->tag_set, nr_io_queues); - nvme_unfreeze(&ctrl->ctrl); } ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); -- cgit v1.2.3 From e371af033c560b9dd1e861f8f0b503142bf0a06c Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 14 Sep 2021 18:38:55 +0300 Subject: nvme-tcp: fix incorrect h2cdata pdu offset accounting When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion") Reported-by: Nowak, Lukasz Tested-by: Nowak, Lukasz Signed-off-by: Sagi Grimberg Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index e4249b7dc056..3c1c29dd3020 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -620,7 +620,7 @@ static int nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req, cpu_to_le32(data->hdr.hlen + hdgst + req->pdu_len + ddgst); data->ttag = pdu->ttag; data->command_id = nvme_cid(rq); - data->data_offset = cpu_to_le32(req->data_sent); + data->data_offset = pdu->r2t_offset; data->data_length = cpu_to_le32(req->pdu_len); return 0; } @@ -953,7 +953,15 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) nvme_tcp_ddgst_update(queue->snd_hash, page, offset, ret); - /* fully successful last write*/ + /* + * update the request iterator except for the last payload send + * in the request where we don't want to modify it as we may + * compete with the RX path completing the request. + */ + if (req->data_sent + ret < req->data_len) + nvme_tcp_advance_req(req, ret); + + /* fully successful last send in current PDU */ if (last && ret == len) { if (queue->data_digest) { nvme_tcp_ddgst_final(queue->snd_hash, @@ -965,7 +973,6 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) } return 1; } - nvme_tcp_advance_req(req, ret); } return -EAGAIN; } -- cgit v1.2.3 From 298ba0e3d4af539cc37f982d4c011a0f07fca48c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 14 Sep 2021 08:38:20 +0200 Subject: nvme: keep ctrl->namespaces ordered Various places in the nvme code that rely on ctrl->namespace to be ordered. Ensure that the namespae is inserted into the list at the right position from the start instead of sorting it after the fact. Fixes: 540c801c65eb ("NVMe: Implement namespace list scanning") Reported-by: Anton Eidelman Signed-off-by: Christoph Hellwig Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Reviewed-by: Damien Le Moal --- drivers/nvme/host/core.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 6600e138945e..e486845d2c7e 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -3716,15 +3715,6 @@ out_unlock: return ret; } -static int ns_cmp(void *priv, const struct list_head *a, - const struct list_head *b) -{ - struct nvme_ns *nsa = container_of(a, struct nvme_ns, list); - struct nvme_ns *nsb = container_of(b, struct nvme_ns, list); - - return nsa->head->ns_id - nsb->head->ns_id; -} - struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid) { struct nvme_ns *ns, *ret = NULL; @@ -3745,6 +3735,22 @@ struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid) } EXPORT_SYMBOL_NS_GPL(nvme_find_get_ns, NVME_TARGET_PASSTHRU); +/* + * Add the namespace to the controller list while keeping the list ordered. + */ +static void nvme_ns_add_to_ctrl_list(struct nvme_ns *ns) +{ + struct nvme_ns *tmp; + + list_for_each_entry_reverse(tmp, &ns->ctrl->namespaces, list) { + if (tmp->head->ns_id < ns->head->ns_id) { + list_add(&ns->list, &tmp->list); + return; + } + } + list_add(&ns->list, &ns->ctrl->namespaces); +} + static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid, struct nvme_ns_ids *ids) { @@ -3795,9 +3801,8 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid, goto out_unlink_ns; down_write(&ctrl->namespaces_rwsem); - list_add_tail(&ns->list, &ctrl->namespaces); + nvme_ns_add_to_ctrl_list(ns); up_write(&ctrl->namespaces_rwsem); - nvme_get_ctrl(ctrl); if (device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups)) @@ -4080,10 +4085,6 @@ static void nvme_scan_work(struct work_struct *work) if (nvme_scan_ns_list(ctrl) != 0) nvme_scan_ns_sequential(ctrl); mutex_unlock(&ctrl->scan_lock); - - down_write(&ctrl->namespaces_rwsem); - list_sort(NULL, &ctrl->namespaces, ns_cmp); - up_write(&ctrl->namespaces_rwsem); } /* -- cgit v1.2.3 From 96f5bd03e1be606987644b71899ea56a8d05f825 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 20 Sep 2021 12:03:45 +0200 Subject: xen/balloon: fix balloon kthread freezing Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com Signed-off-by: Juergen Gross --- drivers/xen/balloon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2d2803883306..43ebfe36ac27 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -522,8 +522,8 @@ static int balloon_thread(void *unused) timeout = 3600 * HZ; credit = current_credit(); - wait_event_interruptible_timeout(balloon_thread_wq, - balloon_thread_cond(state, credit), timeout); + wait_event_freezable_timeout(balloon_thread_wq, + balloon_thread_cond(state, credit), timeout); if (kthread_should_stop()) return 0; -- cgit v1.2.3 From 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 20 Sep 2021 18:15:11 +0200 Subject: xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 349f780a1567..6e0d0754f94f 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -755,8 +755,8 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) preempt_enable(); } -static void xen_convert_trap_info(const struct desc_ptr *desc, - struct trap_info *traps) +static unsigned xen_convert_trap_info(const struct desc_ptr *desc, + struct trap_info *traps, bool full) { unsigned in, out, count; @@ -766,17 +766,18 @@ static void xen_convert_trap_info(const struct desc_ptr *desc, for (in = out = 0; in < count; in++) { gate_desc *entry = (gate_desc *)(desc->address) + in; - if (cvt_gate_to_trap(in, entry, &traps[out])) + if (cvt_gate_to_trap(in, entry, &traps[out]) || full) out++; } - traps[out].address = 0; + + return out; } void xen_copy_trap_info(struct trap_info *traps) { const struct desc_ptr *desc = this_cpu_ptr(&idt_desc); - xen_convert_trap_info(desc, traps); + xen_convert_trap_info(desc, traps, true); } /* Load a new IDT into Xen. In principle this can be per-CPU, so we @@ -786,6 +787,7 @@ static void xen_load_idt(const struct desc_ptr *desc) { static DEFINE_SPINLOCK(lock); static struct trap_info traps[257]; + unsigned out; trace_xen_cpu_load_idt(desc); @@ -793,7 +795,8 @@ static void xen_load_idt(const struct desc_ptr *desc) memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc)); - xen_convert_trap_info(desc, traps); + out = xen_convert_trap_info(desc, traps, false); + memset(&traps[out], 0, sizeof(traps[0])); xen_mc_flush(); if (HYPERVISOR_set_trap_table(traps)) -- cgit v1.2.3 From 8aa83e6395ce047a506f0b16edca45f36c1ae7f8 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 20 Sep 2021 14:04:21 +0200 Subject: x86/setup: Call early_reserve_memory() earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit in Fixes introduced early_reserve_memory() to do all needed initial memblock_reserve() calls in one function. Unfortunately, the call of early_reserve_memory() is done too late for Xen dom0, as in some cases a Xen hook called by e820__memory_setup() will need those memory reservations to have happened already. Move the call of early_reserve_memory() before the call of e820__memory_setup() in order to avoid such problems. Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Juergen Gross Signed-off-by: Borislav Petkov Tested-by: Marek Marczykowski-Górecki Tested-by: Nathan Chancellor Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com --- arch/x86/kernel/setup.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 79f164141116..40ed44ead063 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -830,6 +830,20 @@ void __init setup_arch(char **cmdline_p) x86_init.oem.arch_setup(); + /* + * Do some memory reservations *before* memory is added to memblock, so + * memblock allocations won't overwrite it. + * + * After this point, everything still needed from the boot loader or + * firmware or kernel text should be early reserved or marked not RAM in + * e820. All other memory is free game. + * + * This call needs to happen before e820__memory_setup() which calls the + * xen_memory_setup() on Xen dom0 which relies on the fact that those + * early reservations have happened already. + */ + early_reserve_memory(); + iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; e820__memory_setup(); parse_setup_data(); @@ -876,18 +890,6 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - /* - * Do some memory reservations *before* memory is added to - * memblock, so memblock allocations won't overwrite it. - * Do it after early param, so we could get (unlikely) panic from - * serial. - * - * After this point everything still needed from the boot loader or - * firmware or kernel text should be early reserved or marked not - * RAM in e820. All other memory is free game. - */ - early_reserve_memory(); - #ifdef CONFIG_MEMORY_HOTPLUG /* * Memory used by the kernel cannot be hot-removed because Linux -- cgit v1.2.3 From 6c90731980655280ea07ce4b21eb97457bf86286 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Sep 2021 21:18:14 +0200 Subject: net/smc: add missing error check in smc_clc_prfx_set() Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index e286dafd6e88..6ec1ebe878ae 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -230,7 +230,8 @@ static int smc_clc_prfx_set(struct socket *clcsock, goto out_rel; } /* get address to which the internal TCP socket is bound */ - kernel_getsockname(clcsock, (struct sockaddr *)&addrs); + if (kernel_getsockname(clcsock, (struct sockaddr *)&addrs) < 0) + goto out_rel; /* analyze IP specific data of net_device belonging to TCP socket */ addr6 = (struct sockaddr_in6 *)&addrs; rcu_read_lock(); -- cgit v1.2.3 From a18cee4791b1123d0a6579a7c89f4b87e48abe03 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Sep 2021 21:18:15 +0200 Subject: net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work The abort_work is scheduled when a connection was detected to be out-of-sync after a link failure. The work calls smc_conn_kill(), which calls smc_close_active_abort() and that might end up calling smc_close_cancel_work(). smc_close_cancel_work() cancels any pending close_work and tx_work but needs to release the sock_lock before and acquires the sock_lock again afterwards. So when the sock_lock was NOT acquired before then it may be held after the abort_work completes. Thats why the sock_lock is acquired before the call to smc_conn_kill() in __smc_lgr_terminate(), but this is missing in smc_conn_abort_work(). Fix that by acquiring the sock_lock first and release it after the call to smc_conn_kill(). Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index af227b65669e..8280c938be80 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1474,7 +1474,9 @@ static void smc_conn_abort_work(struct work_struct *work) abort_work); struct smc_sock *smc = container_of(conn, struct smc_sock, conn); + lock_sock(&smc->sk); smc_conn_kill(conn, true); + release_sock(&smc->sk); sock_put(&smc->sk); /* sock_hold done by schedulers of abort_work */ } -- cgit v1.2.3 From e5845aa0eadda3d8a950eb8845c1396827131f30 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 01:49:18 +0300 Subject: net: dsa: fix dsa_tree_setup error path Since the blamed commit, dsa_tree_teardown_switches() was split into two smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports. However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports. Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index f14897d9b31d..f54639a3a822 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -1089,6 +1089,7 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) teardown_master: dsa_tree_teardown_master(dst); teardown_switches: + dsa_tree_teardown_ports(dst); dsa_tree_teardown_switches(dst); teardown_cpu_ports: dsa_tree_teardown_cpu_ports(dst); -- cgit v1.2.3 From 3e95cfa24e24fbd7fb7675ab972a5aa507c7a89c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 21 Sep 2021 15:41:23 +0900 Subject: Doc: networking: Fox a typo in ice.rst This patch fixes a spelling typo in ice.rst Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- Documentation/networking/device_drivers/ethernet/intel/ice.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index e7d9cbff771b..67b7a701ce9e 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -851,7 +851,7 @@ NOTES: - 0x88A8 traffic will not be received unless VLAN stripping is disabled with the following command:: - # ethool -K rxvlan off + # ethtool -K rxvlan off - 0x88A8/0x8100 double VLANs cannot be used with 0x8100 or 0x8100/0x8100 VLANS configured on the same port. 0x88a8/0x8100 traffic will not be received if -- cgit v1.2.3 From 2566fffd6011df17dfba0b216fe9a154d3eb3f75 Mon Sep 17 00:00:00 2001 From: Radhakrishna Sripada Date: Tue, 14 Sep 2021 15:07:44 -0700 Subject: drm/i915: Update memory bandwidth parameters Earlier while calculating derated bw we would use 90% of the calculated bw. Starting ADL-P we use a non standard derating. Updating the formulae to reflect the same. Bspec: 64631 v2: Use the new derating value only for ADL-P(MattR) Fixes: 4d32fe2f14a7 ("drm/i915/adl_p: Update memory bandwidth parameters") Cc: Matt Roper Signed-off-by: Radhakrishna Sripada Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com (cherry picked from commit f6d66fc8cf5f673ea76407be84dc17dbb3eda108) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_bw.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c index e91e0e0191fb..4b94256d7319 100644 --- a/drivers/gpu/drm/i915/display/intel_bw.c +++ b/drivers/gpu/drm/i915/display/intel_bw.c @@ -222,31 +222,42 @@ static int icl_sagv_max_dclk(const struct intel_qgv_info *qi) struct intel_sa_info { u16 displayrtids; - u8 deburst, deprogbwlimit; + u8 deburst, deprogbwlimit, derating; }; static const struct intel_sa_info icl_sa_info = { .deburst = 8, .deprogbwlimit = 25, /* GB/s */ .displayrtids = 128, + .derating = 10, }; static const struct intel_sa_info tgl_sa_info = { .deburst = 16, .deprogbwlimit = 34, /* GB/s */ .displayrtids = 256, + .derating = 10, }; static const struct intel_sa_info rkl_sa_info = { .deburst = 16, .deprogbwlimit = 20, /* GB/s */ .displayrtids = 128, + .derating = 10, }; static const struct intel_sa_info adls_sa_info = { .deburst = 16, .deprogbwlimit = 38, /* GB/s */ .displayrtids = 256, + .derating = 10, +}; + +static const struct intel_sa_info adlp_sa_info = { + .deburst = 16, + .deprogbwlimit = 38, /* GB/s */ + .displayrtids = 256, + .derating = 20, }; static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa) @@ -302,7 +313,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel bw = icl_calc_bw(sp->dclk, clpchgroup * 32 * num_channels, ct); bi->deratedbw[j] = min(maxdebw, - bw * 9 / 10); /* 90% */ + bw * (100 - sa->derating) / 100); drm_dbg_kms(&dev_priv->drm, "BW%d / QGV %d: num_planes=%d deratedbw=%u\n", @@ -400,7 +411,9 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv) if (IS_DG2(dev_priv)) dg2_get_bw_info(dev_priv); - else if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv)) + else if (IS_ALDERLAKE_P(dev_priv)) + icl_get_bw_info(dev_priv, &adlp_sa_info); + else if (IS_ALDERLAKE_S(dev_priv)) icl_get_bw_info(dev_priv, &adls_sa_info); else if (IS_ROCKETLAKE(dev_priv)) icl_get_bw_info(dev_priv, &rkl_sa_info); -- cgit v1.2.3 From f9b23c157a78c77545099312394d484ce4f35b8b Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Mon, 30 Aug 2021 14:09:48 +0200 Subject: drm/i915: Move __i915_gem_free_object to ttm_bo_destroy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we implement delayed destroy, we may have a second call to the delete_mem_notify() handler, while free_object() only should be called once. Move it to bo->destroy(), to ensure it's only called once. This fixes some weird memory corruption issues with delayed destroy when async eviction is used. Signed-off-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Cc: Thomas Hellström Reviewed-by: Thomas Hellström (cherry picked from commit 48b0961269546716c3232748bf37e64e49fb866c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_ttm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c index 35eedc14f522..6ea13159bffc 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c @@ -356,11 +356,8 @@ static void i915_ttm_delete_mem_notify(struct ttm_buffer_object *bo) { struct drm_i915_gem_object *obj = i915_ttm_to_gem(bo); - if (likely(obj)) { - /* This releases all gem object bindings to the backend. */ + if (likely(obj)) i915_ttm_free_cached_io_st(obj); - __i915_gem_free_object(obj); - } } static struct intel_memory_region * @@ -875,8 +872,12 @@ void i915_ttm_bo_destroy(struct ttm_buffer_object *bo) { struct drm_i915_gem_object *obj = i915_ttm_to_gem(bo); + /* This releases all gem object bindings to the backend. */ + __i915_gem_free_object(obj); + i915_gem_object_release_memory_region(obj); mutex_destroy(&obj->ttm.get_io_page.lock); + if (obj->ttm.created) call_rcu(&obj->rcu, __i915_gem_free_object_rcu); } -- cgit v1.2.3 From b875fb313a10bf816b5d49d8d7642d1cc9905f2f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 9 Aug 2021 12:48:05 -0700 Subject: drm/i915: Free all DMC payloads MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Free all the DMC payloads, not just DMC_MAIN. unreferenced object 0xffff88ff32d4d800 (size 1024): comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s) hex dump (first 32 bytes): 40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff88ff0bde4000 (size 1024): comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s) hex dump (first 32 bytes): 40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging") Cc: Anusha Srivatsa Cc: José Roberto de Souza Signed-off-by: Chris Wilson Signed-off-by: Lucas De Marchi Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20210809194805.3793060-1-lucas.demarchi@intel.com (cherry picked from commit 064b877dff4252ced91a1c8b1f129073f2991f6e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dmc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c b/drivers/gpu/drm/i915/display/intel_dmc.c index 3c3c6cb5c0df..b3c8e1c450ef 100644 --- a/drivers/gpu/drm/i915/display/intel_dmc.c +++ b/drivers/gpu/drm/i915/display/intel_dmc.c @@ -805,11 +805,14 @@ void intel_dmc_ucode_resume(struct drm_i915_private *dev_priv) */ void intel_dmc_ucode_fini(struct drm_i915_private *dev_priv) { + int id; + if (!HAS_DMC(dev_priv)) return; intel_dmc_ucode_suspend(dev_priv); drm_WARN_ON(&dev_priv->drm, dev_priv->dmc.wakeref); - kfree(dev_priv->dmc.dmc_info[DMC_FW_MAIN].payload); + for (id = 0; id < DMC_FW_MAX; id++) + kfree(dev_priv->dmc.dmc_info[id].payload); } -- cgit v1.2.3 From 8c8a3b5bd960cd88f7655b5251dc28741e11f139 Mon Sep 17 00:00:00 2001 From: Peter Collingbourne Date: Wed, 15 Sep 2021 12:03:35 -0700 Subject: arm64: add MTE supported check to thread switching and syscall entry/exit This lets us avoid doing unnecessary work on hardware that does not support MTE, and will allow us to freely use MTE instructions in the code called by mte_thread_switch(). Since this would mean that we do a redundant check in mte_check_tfsr_el1(), remove it and add two checks now required in its callers. This also avoids an unnecessary DSB+ISB sequence on the syscall exit path for hardware not supporting MTE. Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault") Cc: # 5.13.x Signed-off-by: Peter Collingbourne Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com [catalin.marinas@arm.com: adjust the commit log slightly] Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/mte.h | 6 ++++++ arch/arm64/kernel/mte.c | 10 ++++------ 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index 3f93b9e0b339..02511650cffe 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -99,11 +99,17 @@ void mte_check_tfsr_el1(void); static inline void mte_check_tfsr_entry(void) { + if (!system_supports_mte()) + return; + mte_check_tfsr_el1(); } static inline void mte_check_tfsr_exit(void) { + if (!system_supports_mte()) + return; + /* * The asynchronous faults are sync'ed automatically with * TFSR_EL1 on kernel entry but for exit an explicit dsb() diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index 9d314a3bad3b..e5e801bc5312 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -142,12 +142,7 @@ void mte_enable_kernel_async(void) #ifdef CONFIG_KASAN_HW_TAGS void mte_check_tfsr_el1(void) { - u64 tfsr_el1; - - if (!system_supports_mte()) - return; - - tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1); + u64 tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1); if (unlikely(tfsr_el1 & SYS_TFSR_EL1_TF1)) { /* @@ -199,6 +194,9 @@ void mte_thread_init_user(void) void mte_thread_switch(struct task_struct *next) { + if (!system_supports_mte()) + return; + mte_update_sctlr_user(next); /* -- cgit v1.2.3 From 3f4b57ad07d9237acf1b8cff3f8bf530cacef87a Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Mon, 20 Sep 2021 16:49:39 +0200 Subject: ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers Commit 25d27c4f68d2 ("ASoC: pcm512x: Add support for more data formats") breaks the TSE-850 device, which is using a pcm5142 in I2S and CBM_CFS mode (maybe not relevant). Without this fix, the result is: pcm512x 0-004c: Failed to set data format: -16 And after that, no sound. This fix is not 100% correct. The datasheet of at least the pcm5142 states that four bits (0xcc) in the I2S_1 register are "RSV" ("Reserved. Do not access.") and no hint is given as to what the initial values are supposed to be. So, specifying defaults for these bits is wrong. But perhaps better than a broken driver? Fixes: 25d27c4f68d2 ("ASoC: pcm512x: Add support for more data formats") Cc: Liam Girdwood Cc: Mark Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: Kirill Marinushkin Cc: Peter Ujfalusi Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Rosin Signed-off-by: Peter Ujfalusi Reviewed-by: Peter Ujfalusi Link: https://lore.kernel.org/r/2d221984-7a2e-7006-0f8a-ffb5f64ee885@axentia.se Signed-off-by: Mark Brown --- sound/soc/codecs/pcm512x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 4dc844f3c1fc..60dee41816dc 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -116,6 +116,8 @@ static const struct reg_default pcm512x_reg_defaults[] = { { PCM512x_FS_SPEED_MODE, 0x00 }, { PCM512x_IDAC_1, 0x01 }, { PCM512x_IDAC_2, 0x00 }, + { PCM512x_I2S_1, 0x02 }, + { PCM512x_I2S_2, 0x00 }, }; static bool pcm512x_readable(struct device *dev, unsigned int reg) -- cgit v1.2.3 From 74b7ee0e7b61838a0a161a84d105aeff0d042646 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 10 Sep 2021 17:18:30 +0800 Subject: ASoC: fsl_xcvr: Fix channel swap issue with ARC With pause and resume test for ARC, there is occasionally channel swap issue. The reason is that currently driver set the DPATH out of reset first, then start the DMA, the first data got from FIFO may not be the Left channel. Moving DPATH out of reset operation after the dma enablement to fix this issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1631265510-27384-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 7ba2fd15132d..d0556c79fdb1 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -487,8 +487,9 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, return ret; } - /* clear DPATH RESET */ + /* set DPATH RESET */ m_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx); + v_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx); ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, m_ctl, v_ctl); if (ret < 0) { dev_err(dai->dev, "Error while setting EXT_CTRL: %d\n", ret); @@ -590,10 +591,6 @@ static void fsl_xcvr_shutdown(struct snd_pcm_substream *substream, val |= FSL_XCVR_EXT_CTRL_CMDC_RESET(tx); } - /* set DPATH RESET */ - mask |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx); - val |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx); - ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, mask, val); if (ret < 0) { dev_err(dai->dev, "Err setting DPATH RESET: %d\n", ret); @@ -643,6 +640,16 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd, dev_err(dai->dev, "Failed to enable DMA: %d\n", ret); return ret; } + + /* clear DPATH RESET */ + ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, + FSL_XCVR_EXT_CTRL_DPTH_RESET(tx), + 0); + if (ret < 0) { + dev_err(dai->dev, "Failed to clear DPATH RESET: %d\n", ret); + return ret; + } + break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: -- cgit v1.2.3 From 5135e96a3dd2f4555ae6981c3155a62bcf3227f6 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 00:42:08 +0300 Subject: net: dsa: don't allocate the slave_mii_bus using devres The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, DSA falls into category (a), it tries to be helpful and registers an MDIO bus on behalf of the switch, which might be on such a bus. I've no idea why it does it under devres. It does this on probe: if (!ds->slave_mii_bus && ds->ops->phy_read) alloc and register mdio bus and this on remove: if (ds->slave_mii_bus && ds->ops->phy_read) unregister mdio bus I _could_ imagine using devres because the condition used on remove is different than the condition used on probe. So strictly speaking, DSA cannot determine whether the ds->slave_mii_bus it sees on remove is the ds->slave_mii_bus that _it_ has allocated on probe. Using devres would have solved that problem. But nonetheless, the existing code already proceeds to unregister the MDIO bus, even though it might be unregistering an MDIO bus it has never registered. So I can only guess that no driver that implements ds->ops->phy_read also allocates and registers ds->slave_mii_bus itself. So in that case, if unregistering is fine, freeing must be fine too. Stop using devres and free the MDIO bus manually. This will make devres stop attempting to free a still registered MDIO bus on ->shutdown. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Tested-by: Lino Sanfilippo Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index f54639a3a822..b29262eee00b 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -880,7 +880,7 @@ static int dsa_switch_setup(struct dsa_switch *ds) devlink_params_publish(ds->devlink); if (!ds->slave_mii_bus && ds->ops->phy_read) { - ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev); + ds->slave_mii_bus = mdiobus_alloc(); if (!ds->slave_mii_bus) { err = -ENOMEM; goto teardown; @@ -890,13 +890,16 @@ static int dsa_switch_setup(struct dsa_switch *ds) err = mdiobus_register(ds->slave_mii_bus); if (err < 0) - goto teardown; + goto free_slave_mii_bus; } ds->setup = true; return 0; +free_slave_mii_bus: + if (ds->slave_mii_bus && ds->ops->phy_read) + mdiobus_free(ds->slave_mii_bus); teardown: if (ds->ops->teardown) ds->ops->teardown(ds); @@ -921,8 +924,11 @@ static void dsa_switch_teardown(struct dsa_switch *ds) if (!ds->setup) return; - if (ds->slave_mii_bus && ds->ops->phy_read) + if (ds->slave_mii_bus && ds->ops->phy_read) { mdiobus_unregister(ds->slave_mii_bus); + mdiobus_free(ds->slave_mii_bus); + ds->slave_mii_bus = NULL; + } dsa_switch_unregister_notifier(ds); -- cgit v1.2.3 From 74b6d7d13307b016f4b5bba8198297824c0ee6df Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 00:42:09 +0300 Subject: net: dsa: realtek: register the MDIO bus under devres MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, the Realtek drivers fall under category (b). To solve it, we can register the MDIO bus under devres too, which restores the previous behavior. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo Reported-by: Alvin Šipraga Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/realtek-smi-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index dd2f0d6208b3..2fcfd917b876 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -368,7 +368,7 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi) smi->slave_mii_bus->parent = smi->dev; smi->ds->slave_mii_bus = smi->slave_mii_bus; - ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np); + ret = devm_of_mdiobus_register(smi->dev, smi->slave_mii_bus, mdio_np); if (ret) { dev_err(smi->dev, "unable to register MDIO bus %s\n", smi->slave_mii_bus->id); -- cgit v1.2.3 From 1bb30b20b49773369c299d4d6c65227201328663 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:13:42 +0300 Subject: thermal/core: Potential buffer overflow in thermal_build_list_of_policies() After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210916131342.GB25094@kili --- drivers/thermal/thermal_core.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 97ef9b040b84..51374f4e1cca 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -222,15 +222,14 @@ int thermal_build_list_of_policies(char *buf) { struct thermal_governor *pos; ssize_t count = 0; - ssize_t size = PAGE_SIZE; mutex_lock(&thermal_governor_lock); list_for_each_entry(pos, &thermal_governor_list, governor_list) { - size = PAGE_SIZE - count; - count += scnprintf(buf + count, size, "%s ", pos->name); + count += scnprintf(buf + count, PAGE_SIZE - count, "%s ", + pos->name); } - count += scnprintf(buf + count, size, "\n"); + count += scnprintf(buf + count, PAGE_SIZE - count, "\n"); mutex_unlock(&thermal_governor_lock); -- cgit v1.2.3 From cf96921876dcee4d6ac07b9de470368a075ba9ad Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Tue, 7 Sep 2021 23:25:42 +0200 Subject: thermal/drivers/tsens: Fix wrong check for tzd in irq handlers Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong. Signed-off-by: Ansuel Smith Reviewed-by: Matthias Kaehlcke Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com --- drivers/thermal/qcom/tsens.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 4c7ebd1d3f9c..b1162e566a70 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -417,7 +417,7 @@ static irqreturn_t tsens_critical_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; - if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; @@ -467,7 +467,7 @@ static irqreturn_t tsens_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; - if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; -- cgit v1.2.3 From 5b72dafaca73b33416c82457ae615e6f2022e901 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Sep 2021 21:48:29 -0700 Subject: platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there is a linker error since the LEDS trigger code is built as a loadable module. This happens because DELL_WMI_PRIVACY is a bool that depends on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous. ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get' Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Randy Dunlap Cc: Perry Yuan Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: Hans de Goede Cc: Mark Gross Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/dell/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index 821aba31821c..42513eab1d06 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -166,8 +166,7 @@ config DELL_WMI config DELL_WMI_PRIVACY bool "Dell WMI Hardware Privacy Support" - depends on DELL_WMI - depends on LEDS_TRIGGER_AUDIO + depends on LEDS_TRIGGER_AUDIO = y || DELL_WMI = LEDS_TRIGGER_AUDIO help This option adds integration with the "Dell Hardware Privacy" feature of Dell laptops to the dell-wmi driver. -- cgit v1.2.3 From b201cb0ebe87b209e252d85668e517ac1929e250 Mon Sep 17 00:00:00 2001 From: José Expósito Date: Mon, 20 Sep 2021 18:03:12 +0200 Subject: platform/x86/intel: hid: Add DMI switches allow list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE reports. Add an allow list and accept such reports only from devices in it. Bug reported for Dell XPS 17 9710 on: https://gitlab.freedesktop.org/libinput/libinput/-/issues/662 Reported-by: Tobias Gurtzick Suggested-by: Hans de Goede Tested-by: Tobias Gurtzick Signed-off-by: José Expósito Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com [hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once] Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/hid.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index a33a5826e81a..08598942a6d7 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -118,12 +118,30 @@ static const struct dmi_system_id dmi_vgbs_allow_list[] = { { } }; +/* + * Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE + * reports. Accept such reports only from devices in this list. + */ +static const struct dmi_system_id dmi_auto_add_switch[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */), + }, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */), + }, + }, + {} /* Array terminator */ +}; + struct intel_hid_priv { struct input_dev *input_dev; struct input_dev *array; struct input_dev *switches; bool wakeup_mode; - bool dual_accel; + bool auto_add_switch; }; #define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" @@ -452,10 +470,8 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) * Some convertible have unreliable VGBS return which could cause incorrect * SW_TABLET_MODE report, in these cases we enable support when receiving * the first event instead of during driver setup. - * - * See dual_accel_detect.h for more info on the dual_accel check. */ - if (!priv->switches && !priv->dual_accel && (event == 0xcc || event == 0xcd)) { + if (!priv->switches && priv->auto_add_switch && (event == 0xcc || event == 0xcd)) { dev_info(&device->dev, "switch event received, enable switches supports\n"); err = intel_hid_switches_setup(device); if (err) @@ -596,7 +612,8 @@ static int intel_hid_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); - priv->dual_accel = dual_accel_detect(); + /* See dual_accel_detect.h for more info on the dual_accel check. */ + priv->auto_add_switch = dmi_check_system(dmi_auto_add_switch) && !dual_accel_detect(); err = intel_hid_input_setup(device); if (err) { -- cgit v1.2.3 From 6f6aab1caf6c7fef46852aaab03f4e8250779e52 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Tue, 21 Sep 2021 12:07:02 +0200 Subject: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested with a AMD Ryzen 7 5800X. Signed-off-by: Tobias Jakobi Acked-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.de Signed-off-by: Hans de Goede --- drivers/platform/x86/gigabyte-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c index 7f3a03f937f6..d53634c8a6e0 100644 --- a/drivers/platform/x86/gigabyte-wmi.c +++ b/drivers/platform/x86/gigabyte-wmi.c @@ -144,6 +144,7 @@ static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 GAMING X V2"), + DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550I AORUS PRO AX"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M AORUS PRO-P"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M DS3H"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("Z390 I AORUS PRO WIFI-CF"), -- cgit v1.2.3 From 59a68d4138086c015ab8241c3267eec5550fbd44 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 17 Sep 2021 15:59:30 +0100 Subject: arm64: Mitigate MTE issues with str{n}cmp() As with strlen(), the patches importing the updated str{n}cmp() implementations were originally developed and tested before the advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed not to be MTE-safe. Since in-kernel MTE is still a rather niche case, let it temporarily fall back to the generic C versions for correctness until we can figure out the best fix. Fixes: 758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp") Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp") Cc: # 5.14.x Reported-by: Branislav Rankov Signed-off-by: Robin Murphy Acked-by: Mark Rutland Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/assembler.h | 5 +++++ arch/arm64/include/asm/string.h | 2 ++ arch/arm64/lib/strcmp.S | 2 +- arch/arm64/lib/strncmp.S | 2 +- 4 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 89faca0e740d..bfa58409a4d4 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -525,6 +525,11 @@ alternative_endif #define EXPORT_SYMBOL_NOKASAN(name) EXPORT_SYMBOL(name) #endif +#ifdef CONFIG_KASAN_HW_TAGS +#define EXPORT_SYMBOL_NOHWKASAN(name) +#else +#define EXPORT_SYMBOL_NOHWKASAN(name) EXPORT_SYMBOL_NOKASAN(name) +#endif /* * Emit a 64-bit absolute little endian symbol reference in a way that * ensures that it will be resolved at build time, even when building a diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index 3a3264ff47b9..95f7686b728d 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -12,11 +12,13 @@ extern char *strrchr(const char *, int c); #define __HAVE_ARCH_STRCHR extern char *strchr(const char *, int c); +#ifndef CONFIG_KASAN_HW_TAGS #define __HAVE_ARCH_STRCMP extern int strcmp(const char *, const char *); #define __HAVE_ARCH_STRNCMP extern int strncmp(const char *, const char *, __kernel_size_t); +#endif #define __HAVE_ARCH_STRLEN extern __kernel_size_t strlen(const char *); diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S index d7bee210a798..83bcad72ec97 100644 --- a/arch/arm64/lib/strcmp.S +++ b/arch/arm64/lib/strcmp.S @@ -173,4 +173,4 @@ L(done): ret SYM_FUNC_END_PI(strcmp) -EXPORT_SYMBOL_NOKASAN(strcmp) +EXPORT_SYMBOL_NOHWKASAN(strcmp) diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S index 48d44f7fddb1..e42bcfcd37e6 100644 --- a/arch/arm64/lib/strncmp.S +++ b/arch/arm64/lib/strncmp.S @@ -258,4 +258,4 @@ L(ret0): ret SYM_FUNC_END_PI(strncmp) -EXPORT_SYMBOL_NOKASAN(strncmp) +EXPORT_SYMBOL_NOHWKASAN(strncmp) -- cgit v1.2.3 From d9d1232b48344c6c72dbdf89fae1e7638e5df757 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:57:36 +0200 Subject: misc: bcm-vk: fix tty registration race Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 91ca10d6fa07 ("misc: bcm-vk: add ttyVK support") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917115736.5816-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/bcm-vk/bcm_vk_tty.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c index 1b6076a89ca6..6669625ba4c8 100644 --- a/drivers/misc/bcm-vk/bcm_vk_tty.c +++ b/drivers/misc/bcm-vk/bcm_vk_tty.c @@ -267,13 +267,13 @@ int bcm_vk_tty_init(struct bcm_vk *vk, char *name) struct device *tty_dev; tty_port_init(&vk->tty[i].port); - tty_dev = tty_port_register_device(&vk->tty[i].port, tty_drv, - i, dev); + tty_dev = tty_port_register_device_attr(&vk->tty[i].port, + tty_drv, i, dev, vk, + NULL); if (IS_ERR(tty_dev)) { err = PTR_ERR(tty_dev); goto unwind; } - dev_set_drvdata(tty_dev, vk); vk->tty[i].is_opened = false; } -- cgit v1.2.3 From d7a48e27b38a94bf73c973c236461234610256d5 Mon Sep 17 00:00:00 2001 From: Apurva Nandan Date: Mon, 20 Sep 2021 19:57:13 +0530 Subject: spi: Use 'flash' node name instead of 'spi-flash' in example Change the nodename in the example with spi-nand from 'spi-flash@1' to 'flash@1' to make the schema uniform with both spi-nand and spi-nor flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes, so make the spi-nand examples in dt-bindings use it too for uniformity. Signed-off-by: Apurva Nandan Reviewed-by: Serge Semin Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210920142713.129295-3-a-nandan@ti.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index ca91201a9926..d7e08b03e204 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -171,7 +171,7 @@ examples: cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; rx-sample-delay-ns = <3>; - spi-flash@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; rx-sample-delay-ns = <7>; -- cgit v1.2.3 From ce1c42b4dacfe7d71c852d8bf3371067ccba865c Mon Sep 17 00:00:00 2001 From: Julian Sikorski Date: Mon, 13 Sep 2021 20:14:55 +0200 Subject: Re-enable UAS for LaCie Rugged USB3-FW with fk quirk Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/ Cc: stable Suggested-by: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Julian Sikorski Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index c35a6db993f1..4051c8cd0cd8 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -50,7 +50,7 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, "LaCie", "Rugged USB3-FW", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_IGNORE_UAS), + US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI -- cgit v1.2.3 From b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 13 Sep 2021 23:01:06 +0200 Subject: usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern Signed-off-by: Ondrej Zary Cc: stable Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index efa972be2ee3..c6b3fcf90180 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -416,9 +416,16 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), /* - * Reported by Ondrej Zary + * Reported by Ondrej Zary * The device reports one sector more and breaks when that sector is accessed + * Firmwares older than 2.6c (the latest one and the only that claims Linux + * support) have also broken tag handling */ +UNUSUAL_DEV( 0x04ce, 0x0002, 0x0000, 0x026b, + "ScanLogic", + "SL11R-IDE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, "ScanLogic", "SL11R-IDE", -- cgit v1.2.3 From 517c7bf99bad3d6b9360558414aae634b7472d80 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:57:37 +0300 Subject: usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() This is writing to the first 1 - 3 bytes of "val" and then writing all four bytes to musb_writel(). The last byte is always going to be garbage. Zero out the last bytes instead. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20210916135737.GI25094@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index c42937692207..c968ecda42aa 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -190,6 +190,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } if (len > 0) { /* Write the rest 1 - 3 bytes to FIFO */ + val = 0; memcpy(&val, buf, len); musb_writel(fifo, 0, val); } -- cgit v1.2.3 From c86a2d9058c5a4a05d20ef89e699b7a6b2c89da6 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 17 Sep 2021 00:27:05 +0200 Subject: cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf The changes in the patch series [1] introduced a terminating null byte when reading from cpulist or cpumap sysfs files, for example: $ xxd /sys/devices/system/node/node0/cpulist 00000000: 302d 310a 00 0-1.. Before this change, the output looked as follows: $ xxd /sys/devices/system/node/node0/cpulist 00000000: 302d 310a 0-1. Fix this regression by excluding the terminating null byte from the returned length in cpumap_print_list_to_buf and cpumap_print_bitmask_to_buf. [1] https://lore.kernel.org/all/20210806110251.560-1-song.bao.hua@hisilicon.com/ Fixes: 1fae562983ca ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list") Acked-by: Barry Song Acked-by: Yury Norov Signed-off-by: Tobias Klauser Link: https://lore.kernel.org/r/20210916222705.13554-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman --- include/linux/cpumask.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 5d4d07a9e1ed..1e7399fc69c0 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -996,14 +996,15 @@ cpumap_print_to_pagebuf(bool list, char *buf, const struct cpumask *mask) * cpumask; Typically used by bin_attribute to export cpumask bitmask * ABI. * - * Returns the length of how many bytes have been copied. + * Returns the length of how many bytes have been copied, excluding + * terminating '\0'. */ static inline ssize_t cpumap_print_bitmask_to_buf(char *buf, const struct cpumask *mask, loff_t off, size_t count) { return bitmap_print_bitmask_to_buf(buf, cpumask_bits(mask), - nr_cpu_ids, off, count); + nr_cpu_ids, off, count) - 1; } /** @@ -1018,7 +1019,7 @@ cpumap_print_list_to_buf(char *buf, const struct cpumask *mask, loff_t off, size_t count) { return bitmap_print_list_to_buf(buf, cpumask_bits(mask), - nr_cpu_ids, off, count); + nr_cpu_ids, off, count) - 1; } #if NR_CPUS <= BITS_PER_LONG -- cgit v1.2.3 From ee9d4810aab95208541d2807f9d114f1d5edcee0 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 8 Sep 2021 18:39:53 +0300 Subject: fs/ntfs3: Fix insertion of attr in ni_ins_attr_ext Do not try to insert attribute if there is no room in record. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 1e1a09034f65..0d00b2301a2f 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -953,6 +953,13 @@ static int ni_ins_attr_ext(struct ntfs_inode *ni, struct ATTR_LIST_ENTRY *le, continue; } + /* + * Do not try to insert this attribute + * if there is no room in record. + */ + if (le32_to_cpu(mi->mrec->used) + asize > sbi->record_size) + continue; + /* Try to insert attribute into this subrecord. */ attr = ni_ins_new_attr(ni, mi, le, type, name, name_len, asize, name_off, svcn, ins_le); -- cgit v1.2.3 From d5f6545934c47e97c0b48a645418e877b452a992 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Sep 2021 10:26:21 -0700 Subject: qnx4: work around gcc false positive warning bug In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- fs/qnx4/dir.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c index 2a66844b7ff8..66645a5a35f3 100644 --- a/fs/qnx4/dir.c +++ b/fs/qnx4/dir.c @@ -20,12 +20,33 @@ * depending on the status field in the last byte. The * first byte is where the name start either way, and a * zero means it's empty. + * + * Also, due to a bug in gcc, we don't want to use the + * real (differently sized) name arrays in the inode and + * link entries, but always the 'de_name[]' one in the + * fake struct entry. + * + * See + * + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 + * + * for details, but basically gcc will take the size of the + * 'name' array from one of the used union entries randomly. + * + * This use of 'de_name[]' (48 bytes) avoids the false positive + * warnings that would happen if gcc decides to use 'inode.di_name' + * (16 bytes) even when the pointer and size were to come from + * 'link.dl_name' (48 bytes). + * + * In all cases the actual name pointer itself is the same, it's + * only the gcc internal 'what is the size of this field' logic + * that can get confused. */ union qnx4_directory_entry { struct { - char de_name; - char de_pad[62]; - char de_status; + const char de_name[48]; + u8 de_pad[15]; + u8 de_status; }; struct qnx4_inode_entry inode; struct qnx4_link_info link; @@ -53,29 +74,26 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx) ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK; for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) { union qnx4_directory_entry *de; - const char *name; offset = ix * QNX4_DIR_ENTRY_SIZE; de = (union qnx4_directory_entry *) (bh->b_data + offset); - if (!de->de_name) + if (!de->de_name[0]) continue; if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK))) continue; if (!(de->de_status & QNX4_FILE_LINK)) { size = sizeof(de->inode.di_fname); - name = de->inode.di_fname; ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1; } else { size = sizeof(de->link.dl_fname); - name = de->link.dl_fname; ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) * QNX4_INODES_PER_BLOCK + de->link.dl_inode_ndx; } - size = strnlen(name, size); + size = strnlen(de->de_name, size); QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name)); - if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) { + if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) { brelse(bh); return 0; } -- cgit v1.2.3 From 56eaeb10e2619081cc383febf6740a4c3e806777 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Thu, 9 Sep 2021 13:12:41 +0300 Subject: fs/ntfs3: Change max hardlinks limit to 4000 xfstest generic/041 works with 3003 hardlinks. Because of this we raise hardlinks limit to 4000. There are no drawbacks or regressions. Theoretically we can raise all the way up to ffff, but there is no practical use for this. Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index 303a162c3158..9cc396b117bf 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -26,9 +26,11 @@ #define NTFS_NAME_LEN 255 -/* ntfs.sys used 500 maximum links on-disk struct allows up to 0xffff. */ -#define NTFS_LINK_MAX 0x400 -//#define NTFS_LINK_MAX 0xffff +/* + * ntfs.sys used 500 maximum links on-disk struct allows up to 0xffff. + * xfstest generic/041 creates 3003 hardlinks. + */ +#define NTFS_LINK_MAX 4000 /* * Activate to use 64 bit clusters instead of 32 bits in ntfs.sys. -- cgit v1.2.3 From 6354467245ff8dd04b54e39790f2ee4d21d5419e Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Thu, 9 Sep 2021 13:15:20 +0300 Subject: fs/ntfs3: Add sync flag to ntfs_sb_write_run and al_update This allows to wait only when it's requested. It speeds up creation of hardlinks. Signed-off-by: Konstantin Komarov --- fs/ntfs3/attrib.c | 2 +- fs/ntfs3/attrlist.c | 6 +++--- fs/ntfs3/frecord.c | 2 +- fs/ntfs3/fslog.c | 8 ++++---- fs/ntfs3/fsntfs.c | 8 ++++---- fs/ntfs3/inode.c | 2 +- fs/ntfs3/ntfs_fs.h | 4 ++-- fs/ntfs3/xattr.c | 2 +- 8 files changed, 17 insertions(+), 17 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index c15cc17e3cd9..8a00fa978f5f 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -287,7 +287,7 @@ int attr_make_nonresident(struct ntfs_inode *ni, struct ATTRIB *attr, if (!rsize) { /* Empty resident -> Non empty nonresident. */ } else if (!is_data) { - err = ntfs_sb_write_run(sbi, run, 0, data, rsize); + err = ntfs_sb_write_run(sbi, run, 0, data, rsize, 0); if (err) goto out2; } else if (!page) { diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index b9da527b96aa..bad6d8a849a2 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -333,7 +333,7 @@ int al_add_le(struct ntfs_inode *ni, enum ATTR_TYPE type, const __le16 *name, if (attr && attr->non_res) { err = ntfs_sb_write_run(ni->mi.sbi, &al->run, 0, al->le, - al->size); + al->size, 0); if (err) return err; al->dirty = false; @@ -420,7 +420,7 @@ next: return true; } -int al_update(struct ntfs_inode *ni) +int al_update(struct ntfs_inode *ni, int sync) { int err; struct ATTRIB *attr; @@ -442,7 +442,7 @@ int al_update(struct ntfs_inode *ni) memcpy(resident_data(attr), al->le, al->size); } else { err = ntfs_sb_write_run(ni->mi.sbi, &al->run, 0, al->le, - al->size); + al->size, sync); if (err) goto out; diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 0d00b2301a2f..9a53f809576d 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -3208,7 +3208,7 @@ int ni_write_inode(struct inode *inode, int sync, const char *hint) goto out; } - err = al_update(ni); + err = al_update(ni, sync); if (err) goto out; } diff --git a/fs/ntfs3/fslog.c b/fs/ntfs3/fslog.c index 6e7f9b72792b..06492f088d60 100644 --- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -2215,7 +2215,7 @@ file_is_valid: err = ntfs_sb_write_run(log->ni->mi.sbi, &log->ni->file.run, off, page, - log->page_size); + log->page_size, 0); if (err) goto out; @@ -3706,7 +3706,7 @@ move_data: if (a_dirty) { attr = oa->attr; - err = ntfs_sb_write_run(sbi, oa->run1, vbo, buffer_le, bytes); + err = ntfs_sb_write_run(sbi, oa->run1, vbo, buffer_le, bytes, 0); if (err) goto out; } @@ -5148,10 +5148,10 @@ end_reply: ntfs_fix_pre_write(&rh->rhdr, log->page_size); - err = ntfs_sb_write_run(sbi, &ni->file.run, 0, rh, log->page_size); + err = ntfs_sb_write_run(sbi, &ni->file.run, 0, rh, log->page_size, 0); if (!err) err = ntfs_sb_write_run(sbi, &log->ni->file.run, log->page_size, - rh, log->page_size); + rh, log->page_size, 0); kfree(rh); if (err) diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 77d2e56d5b4f..4de9acb16968 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -1077,7 +1077,7 @@ int ntfs_sb_write(struct super_block *sb, u64 lbo, size_t bytes, } int ntfs_sb_write_run(struct ntfs_sb_info *sbi, const struct runs_tree *run, - u64 vbo, const void *buf, size_t bytes) + u64 vbo, const void *buf, size_t bytes, int sync) { struct super_block *sb = sbi->sb; u8 cluster_bits = sbi->cluster_bits; @@ -1097,7 +1097,7 @@ int ntfs_sb_write_run(struct ntfs_sb_info *sbi, const struct runs_tree *run, for (;;) { u32 op = min_t(u64, len, bytes); - int err = ntfs_sb_write(sb, lbo, op, buf, 0); + int err = ntfs_sb_write(sb, lbo, op, buf, sync); if (err) return err; @@ -2172,7 +2172,7 @@ int ntfs_insert_security(struct ntfs_sb_info *sbi, /* Write main SDS bucket. */ err = ntfs_sb_write_run(sbi, &ni->file.run, sbi->security.next_off, - d_security, aligned_sec_size); + d_security, aligned_sec_size, 0); if (err) goto out; @@ -2190,7 +2190,7 @@ int ntfs_insert_security(struct ntfs_sb_info *sbi, /* Write copy SDS bucket. */ err = ntfs_sb_write_run(sbi, &ni->file.run, mirr_off, d_security, - aligned_sec_size); + aligned_sec_size, 0); if (err) goto out; diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index 33f278a0947c..d583b71bec50 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -1584,7 +1584,7 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, /* Write non resident data. */ if (nsize) { - err = ntfs_sb_write_run(sbi, &ni->file.run, 0, rp, nsize); + err = ntfs_sb_write_run(sbi, &ni->file.run, 0, rp, nsize, 0); if (err) goto out7; } diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index dae6dd4ac619..6731b5d9e2d8 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -465,7 +465,7 @@ bool al_remove_le(struct ntfs_inode *ni, struct ATTR_LIST_ENTRY *le); bool al_delete_le(struct ntfs_inode *ni, enum ATTR_TYPE type, CLST vcn, const __le16 *name, size_t name_len, const struct MFT_REF *ref); -int al_update(struct ntfs_inode *ni); +int al_update(struct ntfs_inode *ni, int sync); static inline size_t al_aligned(size_t size) { return (size + 1023) & ~(size_t)1023; @@ -606,7 +606,7 @@ int ntfs_sb_read(struct super_block *sb, u64 lbo, size_t bytes, void *buffer); int ntfs_sb_write(struct super_block *sb, u64 lbo, size_t bytes, const void *buffer, int wait); int ntfs_sb_write_run(struct ntfs_sb_info *sbi, const struct runs_tree *run, - u64 vbo, const void *buf, size_t bytes); + u64 vbo, const void *buf, size_t bytes, int sync); struct buffer_head *ntfs_bread_run(struct ntfs_sb_info *sbi, const struct runs_tree *run, u64 vbo); int ntfs_read_run_nb(struct ntfs_sb_info *sbi, const struct runs_tree *run, diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index a8c5a899f0dd..5c7c5c7a5ec1 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -441,7 +441,7 @@ update_ea: /* Delete xattr, ATTR_EA */ ni_remove_attr_le(ni, attr, mi, le); } else if (attr->non_res) { - err = ntfs_sb_write_run(sbi, &ea_run, 0, ea_all, size); + err = ntfs_sb_write_run(sbi, &ea_run, 0, ea_all, size, 0); if (err) goto out; } else { -- cgit v1.2.3 From 7af526c740bdbd5b4dcebba04ace5b3b0c07801f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 14 Sep 2021 11:29:49 +0200 Subject: nvmem: NVMEM_NINTENDO_OTP should depend on WII The Nintendo Wii and Wii U OTP is only present on Nintendo Wii and Wii U consoles. Hence add a dependency on WII, to prevent asking the user about this driver when configuring a kernel without Nintendo Wii and Wii U console support. Fixes: 3683b761fe3a10ad ("nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP") Reviewed-by: Emmanuel Gil Peyrot Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/01318920709dddc4d85fe895e2083ca0eee234d8.1631611652.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 39854d43758b..da414617a54d 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -109,6 +109,7 @@ config MTK_EFUSE config NVMEM_NINTENDO_OTP tristate "Nintendo Wii and Wii U OTP Support" + depends on WII || COMPILE_TEST help This is a driver exposing the OTP of a Nintendo Wii or Wii U console. -- cgit v1.2.3 From 708c87168b6121abc74b2a57d0c498baaf70cbea Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 12:43:01 +0300 Subject: ceph: fix off by one bugs in unsafe_request_wait() The "> max" tests should be ">= max" to prevent an out of bounds access on the next lines. Fixes: e1a4541ec0b9 ("ceph: flush the mdlog before waiting on unsafe reqs") Signed-off-by: Dan Carpenter Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/caps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 6c0e52fd0743..3e42d0466521 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2263,7 +2263,7 @@ retry: list_for_each_entry(req, &ci->i_unsafe_dirops, r_unsafe_dir_item) { s = req->r_session; - if (unlikely(s->s_mds > max)) { + if (unlikely(s->s_mds >= max)) { spin_unlock(&ci->i_unsafe_lock); goto retry; } @@ -2277,7 +2277,7 @@ retry: list_for_each_entry(req, &ci->i_unsafe_iops, r_unsafe_target_item) { s = req->r_session; - if (unlikely(s->s_mds > max)) { + if (unlikely(s->s_mds >= max)) { spin_unlock(&ci->i_unsafe_lock); goto retry; } -- cgit v1.2.3 From bb509a6ffed2c8b0950f637ab5779aa818ed1596 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 16 Sep 2021 15:50:23 +0100 Subject: comedi: Fix memory leak in compat_insnlist() `compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST` ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to temporarily hold an array of `struct comedi_insn` converted from the 32-bit version in user space. This memory is only being freed if there is a fault while filling the array, otherwise it is leaked. Add a call to `kfree()` to fix the leak. Fixes: b8d47d881305 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat") Cc: Al Viro Cc: Greg Kroah-Hartman Cc: linux-staging@lists.linux.dev Cc: # 5.13+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/comedi/comedi_fops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c index df77b6bf5c64..763cea8418f8 100644 --- a/drivers/comedi/comedi_fops.c +++ b/drivers/comedi/comedi_fops.c @@ -3090,6 +3090,7 @@ static int compat_insnlist(struct file *file, unsigned long arg) mutex_lock(&dev->mutex); rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file); mutex_unlock(&dev->mutex); + kfree(insns); return rc; } -- cgit v1.2.3 From 2de9d8e0d2fe3a1eb632def2245529067cb35db5 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:37 -0700 Subject: driver core: fw_devlink: Improve handling of cyclic dependencies When we have a dependency of the form: Device-A -> Device-C Device-B Device-C -> Device-B Where, * Indentation denotes "child of" parent in previous line. * X -> Y denotes X is consumer of Y based on firmware (Eg: DT). We have cyclic dependency: device-A -> device-C -> device-B -> device-A fw_devlink current treats device-C -> device-B dependency as an invalid dependency and doesn't enforce it but leaves the rest of the dependencies as is. While the current behavior is necessary, it is not sufficient if the false dependency in this example is actually device-A -> device-C. When this is the case, device-C will correctly probe defer waiting for device-B to be added, but device-A will be incorrectly probe deferred by fw_devlink waiting on device-C to probe successfully. Due to this, none of the devices in the cycle will end up probing. To fix this, we need to go relax all the dependencies in the cycle like we already do in the other instances where fw_devlink detects cycles. A real world example of this was reported[1] and analyzed[2]. [1] - https://lore.kernel.org/lkml/0a2c4106-7f48-2bb5-048e-8c001a7c3fda@samsung.com/ [2] - https://lore.kernel.org/lkml/CAGETcx8peaew90SWiux=TyvuGgvTQOmO4BFALz7aj0Za5QdNFQ@mail.gmail.com/ Fixes: f9aa460672c9 ("driver core: Refactor fw_devlink feature") Cc: stable Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index e65dd803a453..316df6027093 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1772,14 +1772,21 @@ static int fw_devlink_create_devlink(struct device *con, * be broken by applying logic. Check for these types of cycles and * break them so that devices in the cycle probe properly. * - * If the supplier's parent is dependent on the consumer, then - * the consumer-supplier dependency is a false dependency. So, - * treat it as an invalid link. + * If the supplier's parent is dependent on the consumer, then the + * consumer and supplier have a cyclic dependency. Since fw_devlink + * can't tell which of the inferred dependencies are incorrect, don't + * enforce probe ordering between any of the devices in this cyclic + * dependency. Do this by relaxing all the fw_devlink device links in + * this cycle and by treating the fwnode link between the consumer and + * the supplier as an invalid dependency. */ sup_dev = fwnode_get_next_parent_dev(sup_handle); if (sup_dev && device_is_dependent(con, sup_dev)) { - dev_dbg(con, "Not linking to %pfwP - False link\n", - sup_handle); + dev_info(con, "Fixing up cyclic dependency with %pfwP (%s)\n", + sup_handle, dev_name(sup_dev)); + device_links_write_lock(); + fw_devlink_relax_cycle(con, sup_dev); + device_links_write_unlock(); ret = -EINVAL; } else { /* -- cgit v1.2.3 From cb1bcf5ed536747013fe2b3f9bd56ce3242c295a Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 20 Sep 2021 20:07:34 +0900 Subject: ALSA: firewire-motu: fix truncated bytes in message tracepoints In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data channels includes message bytes from device. The total size of message is 48 bits per data block. The 'data_block_message' tracepoints event produced by ALSA firewire-motu driver exposes the sequence of messages to userspace in 64 bit storage, however lower 32 bits are actually available since current implementation truncates 16 bits in upper of the message as a result of bit shift operation within 32 bit storage. This commit fixes the bug by perform the bit shift in 64 bit storage. Fixes: c6b0b9e65f09 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol") Cc: Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/motu/amdtp-motu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/firewire/motu/amdtp-motu.c b/sound/firewire/motu/amdtp-motu.c index 5388b85fb60e..a18c2c033e83 100644 --- a/sound/firewire/motu/amdtp-motu.c +++ b/sound/firewire/motu/amdtp-motu.c @@ -276,10 +276,11 @@ static void __maybe_unused copy_message(u64 *frames, __be32 *buffer, /* This is just for v2/v3 protocol. */ for (i = 0; i < data_blocks; ++i) { - *frames = (be32_to_cpu(buffer[1]) << 16) | - (be32_to_cpu(buffer[2]) >> 16); + *frames = be32_to_cpu(buffer[1]); + *frames <<= 16; + *frames |= be32_to_cpu(buffer[2]) >> 16; + ++frames; buffer += data_block_quadlets; - frames++; } } -- cgit v1.2.3 From 0e3dbf765fe22060acbcb8eb8c4d256e655a1247 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 20 Sep 2021 13:12:28 +0100 Subject: kselftest/arm64: signal: Skip tests if required features are missing During initialization of a signal testcase, features declared as required are properly checked against the running system but no action is then taken to effectively skip such a testcase. Fix core signals test logic to abort initialization and report such a testcase as skipped to the KSelfTest framework. Fixes: f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils") Signed-off-by: Cristian Marussi Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas --- tools/testing/selftests/arm64/signal/test_signals_utils.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c index 6836510a522f..22722abc9dfa 100644 --- a/tools/testing/selftests/arm64/signal/test_signals_utils.c +++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c @@ -266,16 +266,19 @@ int test_init(struct tdescr *td) td->feats_supported |= FEAT_SSBS; if (getauxval(AT_HWCAP) & HWCAP_SVE) td->feats_supported |= FEAT_SVE; - if (feats_ok(td)) + if (feats_ok(td)) { fprintf(stderr, "Required Features: [%s] supported\n", feats_to_string(td->feats_required & td->feats_supported)); - else + } else { fprintf(stderr, "Required Features: [%s] NOT supported\n", feats_to_string(td->feats_required & ~td->feats_supported)); + td->result = KSFT_SKIP; + return 0; + } } /* Perform test specific additional initialization */ -- cgit v1.2.3 From e44fd5081c50b0ffdb75ce6c83452e60173d791b Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 20 Sep 2021 19:01:42 -0500 Subject: ksmbd: log that server is experimental at module load While we are working through detailed security reviews of ksmbd server code we should remind users that it is an experimental module by adding a warning when the module loads. Currently the module shows as experimental in Kconfig and is disabled by default, but we don't want to confuse users. Although ksmbd passes a wide variety of the important functional tests (since initial focus had been largely on functional testing such as smbtorture, xfstests etc.), and ksmbd has added key security features (e.g. GCM256 encryption, Kerberos support), there are ongoing detailed reviews of the code base for path processing and network buffer decoding, and this patch reminds users that the module should be considered "experimental." Reviewed-by: Namjae Jeon Reviewed-by: Paulo Alcantara (SUSE) Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/ksmbd/server.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ksmbd/server.c b/fs/ksmbd/server.c index e6a9f6aa47eb..2a2b2135bfde 100644 --- a/fs/ksmbd/server.c +++ b/fs/ksmbd/server.c @@ -584,6 +584,9 @@ static int __init ksmbd_server_init(void) ret = ksmbd_workqueue_init(); if (ret) goto err_crypto_destroy; + + pr_warn_once("The ksmbd server is experimental, use at your own risk.\n"); + return 0; err_crypto_destroy: -- cgit v1.2.3 From 9f6323311c7064414bfd1edb28e0837baf6b3c7f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 18 Sep 2021 21:02:39 +0900 Subject: ksmbd: add default data stream name in FILE_STREAM_INFORMATION Windows client expect to get default stream name(::DATA) in FILE_STREAM_INFORMATION response even if there is no stream data in file. This patch fix update failure when writing ppt or doc files. Signed-off-by: Namjae Jeon Reviewed-By: Tom Talpey Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 6304c9bda479..f59f9b8be51c 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4428,17 +4428,15 @@ static void get_file_stream_info(struct ksmbd_work *work, file_info->NextEntryOffset = cpu_to_le32(next); } - if (nbytes) { + if (!S_ISDIR(stat.mode)) { file_info = (struct smb2_file_stream_info *) &rsp->Buffer[nbytes]; streamlen = smbConvertToUTF16((__le16 *)file_info->StreamName, "::$DATA", 7, conn->local_nls, 0); streamlen *= 2; file_info->StreamNameLength = cpu_to_le32(streamlen); - file_info->StreamSize = S_ISDIR(stat.mode) ? 0 : - cpu_to_le64(stat.size); - file_info->StreamAllocationSize = S_ISDIR(stat.mode) ? 0 : - cpu_to_le64(stat.size); + file_info->StreamSize = 0; + file_info->StreamAllocationSize = 0; nbytes += sizeof(struct smb2_file_stream_info) + streamlen; } -- cgit v1.2.3 From 96c8395e2166efa86082f3b71567ffd84936439b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Sep 2021 15:44:06 +0100 Subject: spi: Revert modalias changes During the v5.13 cycle we updated the SPI subsystem to generate OF style modaliases for SPI devices, replacing the old Linux style modalises we used to generate based on spi_device_id which are the DT style name with the vendor removed. Unfortunately this means that we start only reporting OF style modalises and not the old ones and there is nothing that ensures that drivers list every possible OF compatible string in their OF ID table. The result is that there are systems which have been relying on loading modules based on the old style that are now broken, as found by Russell King with spi-nor on Macchiatobin. spi-nor is a particularly problematic case for this, it only lists a single generic DT compatible jedec,spi-nor in the driver but supports a huge raft of device specific compatibles, with a large set of part numbers many of which are offered by multiple vendors. Russell's searches of upstream device trees has turned up examples with vendor names written in non-standard ways too. To make matters worse up until 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding") the generic compatible was not part of the binding so there are device trees out there written to that binding version which don't list it all. The sheer number of parts supported together with our previous approach of ignoring the vendor ID makes robustly fixing this by adding compatibles to the spi-nor driver seem problematic, the current DT binding document does not list all the parts supported by the driver at the minute (further patches will fix this). I've also investigated supporting both formats of modalias simultaneously but that doesn't seem possible, especially without breaking our userspace ABI which is obviously not viable. Instead revert the relevant changes for now: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") This will unfortunately mean that any system which had started having modules autoload based on the OF compatibles for drivers that list things there but not in the spi_device_ids will now not have those modules load which is itself a regression. Since it affects a narrower time window and the particularly problematic spi-nor driver may be critical to system boot on smaller systems this seems the best of a series of bad options. I will start an audit of SPI drivers to identify and fix cases where things won't autoload using spi_device_id, this is not great but seems to be the best way forward that anyone has been able to identify. Thanks to Russell for both his report and the additional diagnostic and analysis work he has done here, the detailed research above was his work. Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") Reported-by: Russell King (Oracle) Suggested-by: Russell King (Oracle) Signed-off-by: Mark Brown Tested-by: Russell King (Oracle) Cc: Andreas Schwab Cc: Marco Felsch --- drivers/spi/spi.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 57e2499ec1ed..aea037c65985 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -58,10 +58,6 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf) const struct spi_device *spi = to_spi_device(dev); int len; - len = of_device_modalias(dev, buf, PAGE_SIZE); - if (len != -ENODEV) - return len; - len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1); if (len != -ENODEV) return len; @@ -367,10 +363,6 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) const struct spi_device *spi = to_spi_device(dev); int rc; - rc = of_device_uevent_modalias(dev, env); - if (rc != -ENODEV) - return rc; - rc = acpi_device_uevent_modalias(dev, env); if (rc != -ENODEV) return rc; -- cgit v1.2.3 From e946d3c887a9dc33aa82a349c6284f4a084163f4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Sep 2021 23:33:35 +0300 Subject: cifs: fix a sign extension bug The problem is the mismatched types between "ctx->total_len" which is an unsigned int, "rc" which is an int, and "ctx->rc" which is a ssize_t. The code does: ctx->rc = (rc == 0) ? ctx->total_len : rc; We want "ctx->rc" to store the negative "rc" error code. But what happens is that "rc" is type promoted to a high unsigned int and 'ctx->rc" will store the high positive value instead of a negative value. The fix is to change "rc" from an int to a ssize_t. Fixes: c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO") Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 6796fc73b304..0ab5bb24b8ca 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3113,7 +3113,7 @@ static void collect_uncached_write_data(struct cifs_aio_ctx *ctx) struct cifs_tcon *tcon; struct cifs_sb_info *cifs_sb; struct dentry *dentry = ctx->cfile->dentry; - int rc; + ssize_t rc; tcon = tlink_tcon(ctx->cfile->tlink); cifs_sb = CIFS_SB(dentry->d_sb); -- cgit v1.2.3 From 248f064af222a1f97ee02c84a98013dfbccad386 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 21 Sep 2021 16:52:15 +0200 Subject: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer") Reported-by: Stefan Raspl Root-caused-by: Heiko Carstens Signed-off-by: Julian Wiedmann Reviewed-by: Alexandra Winter Signed-off-by: Jakub Kicinski --- drivers/s390/net/qeth_core_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 41ca6273b750..3fba440a0731 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -202,6 +202,9 @@ static void qeth_clear_working_pool_list(struct qeth_card *card) &card->qdio.in_buf_pool.entry_list, list) list_del(&pool_entry->list); + if (!queue) + return; + for (i = 0; i < ARRAY_SIZE(queue->bufs); i++) queue->bufs[i].pool_entry = NULL; } -- cgit v1.2.3 From ee909d0b1dac8632eeb78cbf17661d6c7674bbd0 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Tue, 21 Sep 2021 16:52:16 +0200 Subject: s390/qeth: Fix deadlock in remove_discipline Problem: qeth_close_dev_handler is a worker that tries to acquire card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline(). Since commit b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") qeth_remove_discipline() is called under card->discipline_mutex and cancels the work and waits for it to finish. STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the only situation that schedules close_dev_work. In that situation scheduling qeth recovery will also result in an offline interface, when resetting the isolation mode fails, if the external switch is still set to VEB. And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") qeth recovery does not aquire card->discipline_mutex anymore. So we accept the longer pathlength of qeth_schedule_recovery in this error situation and re-use the existing function. As a side-benefit this changes the hwtrap to behave like during recovery instead of like during a user-triggered set_offline. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter Acked-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 16 ++++------------ drivers/s390/net/qeth_l2_main.c | 1 - drivers/s390/net/qeth_l3_main.c | 1 - 4 files changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 535a60b3946d..a5aa0bdc61d6 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -858,7 +858,6 @@ struct qeth_card { struct napi_struct napi; struct qeth_rx rx; struct delayed_work buffer_reclaim_work; - struct work_struct close_dev_work; }; static inline bool qeth_card_hw_is_reachable(struct qeth_card *card) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3fba440a0731..9f26706051e5 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -70,15 +70,6 @@ static void qeth_issue_next_read_cb(struct qeth_card *card, static int qeth_qdio_establish(struct qeth_card *); static void qeth_free_qdio_queues(struct qeth_card *card); -static void qeth_close_dev_handler(struct work_struct *work) -{ - struct qeth_card *card; - - card = container_of(work, struct qeth_card, close_dev_work); - QETH_CARD_TEXT(card, 2, "cldevhdl"); - ccwgroup_set_offline(card->gdev); -} - static const char *qeth_get_cardname(struct qeth_card *card) { if (IS_VM_NIC(card)) { @@ -795,10 +786,12 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, case IPA_CMD_STOPLAN: if (cmd->hdr.return_code == IPA_RC_VEPA_TO_VEB_TRANSITION) { dev_err(&card->gdev->dev, - "Interface %s is down because the adjacent port is no longer in reflective relay mode\n", + "Adjacent port of interface %s is no longer in reflective relay mode, trigger recovery\n", netdev_name(card->dev)); - schedule_work(&card->close_dev_work); + /* Set offline, then probably fail to set online: */ + qeth_schedule_recovery(card); } else { + /* stay online for subsequent STARTLAN */ dev_warn(&card->gdev->dev, "The link for interface %s on CHPID 0x%X failed\n", netdev_name(card->dev), card->info.chpid); @@ -1540,7 +1533,6 @@ static void qeth_setup_card(struct qeth_card *card) INIT_LIST_HEAD(&card->ipato.entries); qeth_init_qdio_info(card); INIT_DELAYED_WORK(&card->buffer_reclaim_work, qeth_buffer_reclaim_work); - INIT_WORK(&card->close_dev_work, qeth_close_dev_handler); hash_init(card->rx_mode_addrs); hash_init(card->local_addrs4); hash_init(card->local_addrs6); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 72e84ff9fea5..dc6c00768d91 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -2307,7 +2307,6 @@ static void qeth_l2_remove_device(struct ccwgroup_device *gdev) if (gdev->state == CCWGROUP_ONLINE) qeth_set_offline(card, card->discipline, false); - cancel_work_sync(&card->close_dev_work); if (card->dev->reg_state == NETREG_REGISTERED) { priv = netdev_priv(card->dev); if (priv->brport_features & BR_LEARNING_SYNC) { diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 3a523e700a5a..6fd3e288f059 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1969,7 +1969,6 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_set_offline(card, card->discipline, false); - cancel_work_sync(&card->close_dev_work); if (card->dev->reg_state == NETREG_REGISTERED) unregister_netdev(card->dev); -- cgit v1.2.3 From d2b59bd4b06d84a4eadb520b0f71c62fe8ec0a62 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Tue, 21 Sep 2021 16:52:17 +0200 Subject: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter Reviewed-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski --- arch/s390/include/asm/ccwgroup.h | 2 +- drivers/s390/cio/ccwgroup.c | 10 ++++++++-- drivers/s390/net/qeth_core_main.c | 3 ++- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h index 36dbf5043fc0..aa995d91cd1d 100644 --- a/arch/s390/include/asm/ccwgroup.h +++ b/arch/s390/include/asm/ccwgroup.h @@ -55,7 +55,7 @@ int ccwgroup_create_dev(struct device *root, struct ccwgroup_driver *gdrv, int num_devices, const char *buf); extern int ccwgroup_set_online(struct ccwgroup_device *gdev); -extern int ccwgroup_set_offline(struct ccwgroup_device *gdev); +int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv); extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev); extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev); diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index 2ec741106cb6..f0538609dfe4 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -77,12 +77,13 @@ EXPORT_SYMBOL(ccwgroup_set_online); /** * ccwgroup_set_offline() - disable a ccwgroup device * @gdev: target ccwgroup device + * @call_gdrv: Call the registered gdrv set_offline function * * This function attempts to put the ccwgroup device into the offline state. * Returns: * %0 on success and a negative error value on failure. */ -int ccwgroup_set_offline(struct ccwgroup_device *gdev) +int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv) { struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver); int ret = -EINVAL; @@ -91,11 +92,16 @@ int ccwgroup_set_offline(struct ccwgroup_device *gdev) return -EAGAIN; if (gdev->state == CCWGROUP_OFFLINE) goto out; + if (!call_gdrv) { + ret = 0; + goto offline; + } if (gdrv->set_offline) ret = gdrv->set_offline(gdev); if (ret) goto out; +offline: gdev->state = CCWGROUP_OFFLINE; out: atomic_set(&gdev->onoff, 0); @@ -124,7 +130,7 @@ static ssize_t ccwgroup_online_store(struct device *dev, if (value == 1) ret = ccwgroup_set_online(gdev); else if (value == 0) - ret = ccwgroup_set_offline(gdev); + ret = ccwgroup_set_offline(gdev, true); else ret = -EINVAL; out: diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 9f26706051e5..e9807d2996a9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5514,7 +5514,8 @@ static int qeth_do_reset(void *data) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); } else { - ccwgroup_set_offline(card->gdev); + qeth_set_offline(card, disc, true); + ccwgroup_set_offline(card->gdev, false); dev_warn(&card->gdev->dev, "The qeth device driver failed to recover an error on the device\n"); } -- cgit v1.2.3 From 9b663b34c94a78f39fa2c7a8271b1f828b546e16 Mon Sep 17 00:00:00 2001 From: Michal Vokáč Date: Wed, 18 Aug 2021 09:02:08 +0200 Subject: ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: Cc: linux-leds@vger.kernel.org Signed-off-by: Michal Vokáč Acked-by: Pavel Machek Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index cb8b539eb29d..e5c4dc65fbab 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -5,6 +5,7 @@ #include #include #include +#include #include / { @@ -277,6 +278,7 @@ led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <0>; + color = ; }; chan@1 { @@ -284,6 +286,7 @@ led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <1>; + color = ; }; chan@2 { @@ -291,6 +294,7 @@ led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <2>; + color = ; }; chan@3 { @@ -298,6 +302,7 @@ led-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>; reg = <3>; + color = ; }; }; -- cgit v1.2.3 From 88b099006d83b0bf452379cad4ce494329084726 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 17 Sep 2021 17:43:49 +0300 Subject: scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling" This reverts commit a113eaaf86373362b053279049907ff82b5df6c8. There are a couple of issues with the commit: 1. It causes deadlocks. 2. It causes the shost->eh_cmd_q list of failed requests not to be processed, ever. So revert it. 1. Deadlocks The SCSI error handler runs with requests blocked beginning when scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through scsi_error_handler() callback ->eh_strategy_handler() until scsi_restart_operations() is called. By setting eh_strategy_handler to ufshcd_err_handler, the patch changed the UFS error handler to run with requests blocked, including PM requests, for the entire run of the error handler. That conflicts with UFS error handler existing synchronization with UFS device PM operations. The UFS error handler synchronizes with runtime PM by doing pm_runtime_get_sync() prior to blocking requests itself. It synchronizes with system PM by use of hba->host_sem, again before blocking requests itself. However, if requests are already blocked, then PM operations will block. So: the UFS error handler blocks waiting on PM + PM blocks waiting on SCSI PM requests to process or fail + PM requests are blocked waiting on error handling to finish = deadlock This happens both for runtime PM and system PM. Prior to the patch, these deadlocks could not happen even if SCSI error handling was running, because the presence of requests in shost->eh_cmd_q would mean the queues could not be suspended, which would mean that, should the UFS error handler run at the same time, it would not need to wait for PM or vice versa. Please note these scenarios are not just theoretical, they were found during testing on a Samsung Galaxy Book S. 2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed requests, as all other eh_strategy_handler's do except UFS error handler. Refer for example: scsi_unjam_host(), ata_scsi_error() and sas_scsi_recover_host(). Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com Fixes: a113eaaf8637 ("scsi: ufs: Synchronize SCSI and UFS error handling") Reviewed-by: Bart Van Assche Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 111 ++++++++++++++++++++++------------------------ drivers/scsi/ufs/ufshcd.h | 4 ++ 2 files changed, 58 insertions(+), 57 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 67889d74761c..a3df5804b2c7 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -17,8 +17,6 @@ #include #include #include -#include -#include "../scsi_transport_api.h" #include "ufshcd.h" #include "ufs_quirks.h" #include "unipro.h" @@ -237,6 +235,7 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up); static irqreturn_t ufshcd_intr(int irq, void *__hba); static int ufshcd_change_power_mode(struct ufs_hba *hba, struct ufs_pa_layer_attr *pwr_mode); +static void ufshcd_schedule_eh_work(struct ufs_hba *hba); static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on); static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on); static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, @@ -2759,8 +2758,13 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) out: up_read(&hba->clk_scaling_lock); - if (ufs_trigger_eh()) - scsi_schedule_eh(hba->host); + if (ufs_trigger_eh()) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_schedule_eh_work(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } return err; } @@ -3919,35 +3923,6 @@ out: } EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); -static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) -{ - lockdep_assert_held(hba->host->host_lock); - - return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || - (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); -} - -static void ufshcd_schedule_eh(struct ufs_hba *hba) -{ - bool schedule_eh = false; - unsigned long flags; - - spin_lock_irqsave(hba->host->host_lock, flags); - /* handle fatal errors only when link is not in error state */ - if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { - if (hba->force_reset || ufshcd_is_link_broken(hba) || - ufshcd_is_saved_err_fatal(hba)) - hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; - else - hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; - schedule_eh = true; - } - spin_unlock_irqrestore(hba->host->host_lock, flags); - - if (schedule_eh) - scsi_schedule_eh(hba->host); -} - /** * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power * state) and waits for it to take effect. @@ -3968,7 +3943,6 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) { DECLARE_COMPLETION_ONSTACK(uic_async_done); unsigned long flags; - bool schedule_eh = false; u8 status; int ret; bool reenable_intr = false; @@ -4038,14 +4012,10 @@ out: ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); if (ret) { ufshcd_set_link_broken(hba); - schedule_eh = true; + ufshcd_schedule_eh_work(hba); } - out_unlock: spin_unlock_irqrestore(hba->host->host_lock, flags); - - if (schedule_eh) - ufshcd_schedule_eh(hba); mutex_unlock(&hba->uic_cmd_mutex); return ret; @@ -5911,6 +5881,27 @@ out: return err_handling; } +/* host lock must be held before calling this func */ +static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) +{ + return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || + (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); +} + +/* host lock must be held before calling this func */ +static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba) +{ + /* handle fatal errors only when link is not in error state */ + if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { + if (hba->force_reset || ufshcd_is_link_broken(hba) || + ufshcd_is_saved_err_fatal(hba)) + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; + else + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; + queue_work(hba->eh_wq, &hba->eh_work); + } +} + static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow) { down_write(&hba->clk_scaling_lock); @@ -6044,11 +6035,11 @@ static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba) /** * ufshcd_err_handler - handle UFS errors that require s/w attention - * @host: SCSI host pointer + * @work: pointer to work structure */ -static void ufshcd_err_handler(struct Scsi_Host *host) +static void ufshcd_err_handler(struct work_struct *work) { - struct ufs_hba *hba = shost_priv(host); + struct ufs_hba *hba; unsigned long flags; bool err_xfer = false; bool err_tm = false; @@ -6056,9 +6047,10 @@ static void ufshcd_err_handler(struct Scsi_Host *host) int tag; bool needs_reset = false, needs_restore = false; + hba = container_of(work, struct ufs_hba, eh_work); + down(&hba->host_sem); spin_lock_irqsave(hba->host->host_lock, flags); - hba->host->host_eh_scheduled = 0; if (ufshcd_err_handling_should_stop(hba)) { if (hba->ufshcd_state != UFSHCD_STATE_ERROR) hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; @@ -6371,6 +6363,7 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) "host_regs: "); ufshcd_print_pwr_info(hba); } + ufshcd_schedule_eh_work(hba); retval |= IRQ_HANDLED; } /* @@ -6382,10 +6375,6 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) hba->errors = 0; hba->uic_error = 0; spin_unlock(hba->host->host_lock); - - if (queue_eh_work) - ufshcd_schedule_eh(hba); - return retval; } @@ -7048,17 +7037,15 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) * will be to send LU reset which, again, is a spec violation. * To avoid these unnecessary/illegal steps, first we clean up * the lrb taken by this cmd and re-set it in outstanding_reqs, - * then queue the error handler and bail. + * then queue the eh_work and bail. */ if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) { ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun); spin_lock_irqsave(host->host_lock, flags); hba->force_reset = true; + ufshcd_schedule_eh_work(hba); spin_unlock_irqrestore(host->host_lock, flags); - - ufshcd_schedule_eh(hba); - goto release; } @@ -7191,10 +7178,11 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) spin_lock_irqsave(hba->host->host_lock, flags); hba->force_reset = true; + ufshcd_schedule_eh_work(hba); dev_err(hba->dev, "%s: reset in progress - 1\n", __func__); spin_unlock_irqrestore(hba->host->host_lock, flags); - ufshcd_err_handler(hba->host); + flush_work(&hba->eh_work); spin_lock_irqsave(hba->host->host_lock, flags); if (hba->ufshcd_state == UFSHCD_STATE_ERROR) @@ -8604,6 +8592,8 @@ static void ufshcd_hba_exit(struct ufs_hba *hba) if (hba->is_powered) { ufshcd_exit_clk_scaling(hba); ufshcd_exit_clk_gating(hba); + if (hba->eh_wq) + destroy_workqueue(hba->eh_wq); ufs_debugfs_hba_exit(hba); ufshcd_variant_hba_exit(hba); ufshcd_setup_vreg(hba, false); @@ -9448,10 +9438,6 @@ static int ufshcd_set_dma_mask(struct ufs_hba *hba) return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); } -static struct scsi_transport_template ufshcd_transport_template = { - .eh_strategy_handler = ufshcd_err_handler, -}; - /** * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) * @dev: pointer to device handle @@ -9478,7 +9464,6 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM; goto out_error; } - host->transportt = &ufshcd_transport_template; hba = shost_priv(host); hba->host = host; hba->dev = dev; @@ -9518,6 +9503,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) int err; struct Scsi_Host *host = hba->host; struct device *dev = hba->dev; + char eh_wq_name[sizeof("ufs_eh_wq_00")]; if (!mmio_base) { dev_err(hba->dev, @@ -9571,6 +9557,17 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->max_pwr_info.is_valid = false; + /* Initialize work queues */ + snprintf(eh_wq_name, sizeof(eh_wq_name), "ufs_eh_wq_%d", + hba->host->host_no); + hba->eh_wq = create_singlethread_workqueue(eh_wq_name); + if (!hba->eh_wq) { + dev_err(hba->dev, "%s: failed to create eh workqueue\n", + __func__); + err = -ENOMEM; + goto out_disable; + } + INIT_WORK(&hba->eh_work, ufshcd_err_handler); INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); sema_init(&hba->host_sem, 1); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 4723f27a55d1..f0da5d3db1fa 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -741,6 +741,8 @@ struct ufs_hba_monitor { * @is_powered: flag to check if HBA is powered * @shutting_down: flag to check if shutdown has been invoked * @host_sem: semaphore used to serialize concurrent contexts + * @eh_wq: Workqueue that eh_work works on + * @eh_work: Worker to handle UFS errors that require s/w attention * @eeh_work: Worker to handle exception events * @errors: HBA errors * @uic_error: UFS interconnect layer error status @@ -843,6 +845,8 @@ struct ufs_hba { struct semaphore host_sem; /* Work Queues */ + struct workqueue_struct *eh_wq; + struct work_struct eh_work; struct work_struct eeh_work; /* HBA Errors */ -- cgit v1.2.3 From 4497b40ca8217fce9f33c9886f5a1b0408661e03 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Sep 2021 20:43:11 -0300 Subject: Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine" This reverts commit cc8870bf4c3ab0af385538460500a9d342ed945f. Since commit cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") the following errors are seen on boot: [ 0.123372] imx6q_suspend_init: failed to find ocram device! [ 0.123537] imx6_pm_common_init: No DDR LPM support with suspend -19! , which break suspend/resume on imx6q/dl. Revert the offeding commit to avoid the regression. Thanks to Tim Harvey for bisecting this problem. Cc: stable@vger.kernel.org Fixes: cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") Signed-off-by: Fabio Estevam Acked-by: Russell King (Oracle) Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 11dcc369ec14..c9d7c29d95e1 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -172,6 +172,9 @@ static void __init imx6q_init_machine(void) imx_get_soc_revision()); imx6q_enet_phy_init(); + + of_platform_default_populate(NULL, NULL, NULL); + imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); -- cgit v1.2.3 From 1d479e6c9cb2b40abfb455863a4e9335db882e33 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 17 Sep 2021 14:23:14 -0700 Subject: scsi: sd_zbc: Support disks with more than 2**32 logical blocks This patch addresses the following Coverity report about the zno * sdkp->zone_blocks expression: CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression zno * sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type sector_t (64 bits, unsigned). Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: Johannes Thumshirn Cc: Damien Le Moal Cc: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Himanshu Madhani Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 8197d31a81f9..ed06798983f8 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -280,7 +280,7 @@ static void sd_zbc_update_wp_offset_workfn(struct work_struct *work) { struct scsi_disk *sdkp; unsigned long flags; - unsigned int zno; + sector_t zno; int ret; sdkp = container_of(work, struct scsi_disk, zone_wp_offset_work); -- cgit v1.2.3 From d04a968c33684b15d1206e23fc1119ce0f0587fb Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 16 Sep 2021 10:54:04 -0700 Subject: scsi: ufs: core: Unbreak the reset handler A command tag is passed as the second argument of the __ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler() instead of a bitmask. Fix this by passing a bitmask as argument instead of a command tag. Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Can Guo Reviewed-by: Avri Altman Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a3df5804b2c7..029c9631ec2b 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6865,7 +6865,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) err = ufshcd_clear_cmd(hba, pos); if (err) break; - __ufshcd_transfer_req_compl(hba, pos, /*retry_requests=*/true); + __ufshcd_transfer_req_compl(hba, 1U << pos, false); } } -- cgit v1.2.3 From 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Wed, 15 Sep 2021 18:32:39 +0300 Subject: scsi: qla2xxx: Restore initiator in dual mode In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 1e4e3e83b5c7..5fc7697f0af4 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -7169,7 +7169,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) return 0; break; case QLA2XXX_INI_MODE_DUAL: - if (!qla_dual_mode_enabled(vha)) + if (!qla_dual_mode_enabled(vha) && + !qla_ini_mode_enabled(vha)) return 0; break; case QLA2XXX_INI_MODE_ENABLED: -- cgit v1.2.3 From bc41fcbffd5759c9610f7de211420eae6b379503 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:13 +0800 Subject: scsi: fas216: Kill scmd->tag The driver is attempting to allocate a tag internally which is a no-go with blk-mq. Switch the driver to use the request tag and kill usage of scmd->tag and scmd->device->current_tag. [jpg: Change to use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.com Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/fas216.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 9c4458a99025..cf71ef488e36 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -77,7 +77,6 @@ * I was thinking that this was a good chip until I found this restriction ;( */ #define SCSI2_SYNC -#undef SCSI2_TAG #undef DEBUG_CONNECT #undef DEBUG_MESSAGES @@ -990,7 +989,7 @@ fas216_reselected_intr(FAS216_Info *info) info->scsi.disconnectable = 0; if (info->SCpnt->device->id == target && info->SCpnt->device->lun == lun && - info->SCpnt->tag == tag) { + scsi_cmd_to_rq(info->SCpnt)->tag == tag) { fas216_log(info, LOG_CONNECT, "reconnected previously executing command"); } else { queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt); @@ -1791,8 +1790,9 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt) /* * add tag message if required */ - if (SCpnt->tag) - msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag); + if (SCpnt->device->simple_tags) + msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, + scsi_cmd_to_rq(SCpnt)->tag); do { #ifdef SCSI2_SYNC @@ -1815,20 +1815,8 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt) static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt) { -#ifdef SCSI2_TAG - /* - * tagged queuing - allocate a new tag to this command - */ - if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE && - SCpnt->cmnd[0] != INQUIRY) { - SCpnt->device->current_tag += 1; - if (SCpnt->device->current_tag == 0) - SCpnt->device->current_tag = 1; - SCpnt->tag = SCpnt->device->current_tag; - } else -#endif - set_bit(SCpnt->device->id * 8 + - (u8)(SCpnt->device->lun & 0x7), info->busyluns); + set_bit(SCpnt->device->id * 8 + + (u8)(SCpnt->device->lun & 0x7), info->busyluns); info->stats.removes += 1; switch (SCpnt->cmnd[0]) { @@ -2117,7 +2105,6 @@ request_sense: init_SCp(SCpnt); SCpnt->SCp.Message = 0; SCpnt->SCp.Status = 0; - SCpnt->tag = 0; SCpnt->host_scribble = (void *)fas216_rq_sns_done; /* @@ -2223,7 +2210,6 @@ static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt, init_SCp(SCpnt); info->stats.queues += 1; - SCpnt->tag = 0; spin_lock(&info->host_lock); @@ -3003,9 +2989,8 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m) dev = &info->device[scd->id]; seq_printf(m, " %d/%llu ", scd->id, scd->lun); if (scd->tagged_supported) - seq_printf(m, "%3sabled(%3d) ", - scd->simple_tags ? "en" : "dis", - scd->current_tag); + seq_printf(m, "%3sabled ", + scd->simple_tags ? "en" : "dis"); else seq_puts(m, "unsupported "); -- cgit v1.2.3 From 756fb6a895afbf1f0615d93ebdd14863a00b1198 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:14 +0800 Subject: scsi: acornscsi: Remove tagged queuing vestiges The acornscsi driver has a config option to enable tagged queuing, but this option gets disabled in the driver itself with the comment 'needs to be debugged'. As this is a _really_ old driver I doubt anyone will be wanting to invest time here, so remove the tagged queue vestiges and make our lives easier. [jpg: Use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.com Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/Kconfig | 11 ----- drivers/scsi/arm/acornscsi.c | 103 +++++++++---------------------------------- drivers/scsi/arm/queue.c | 2 +- 3 files changed, 23 insertions(+), 93 deletions(-) diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index f34badc75196..9f64133f976a 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -10,17 +10,6 @@ config SCSI_ACORNSCSI_3 This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. -config SCSI_ACORNSCSI_TAGGED_QUEUE - bool "Support SCSI 2 Tagged queueing" - depends on SCSI_ACORNSCSI_3 - help - Say Y here to enable tagged queuing support on the Acorn SCSI card. - - This is a feature of SCSI-2 which improves performance: the host - adapter can send several SCSI commands to a device's queue even if - previous commands haven't finished yet. Some SCSI devices don't - implement this properly, so the safe answer is N. - config SCSI_ACORNSCSI_SYNC bool "Support SCSI 2 Synchronous Transfers" depends on SCSI_ACORNSCSI_3 diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 4a84599ff491..b4cb5fb19998 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -52,12 +52,8 @@ * You can tell if you have a device that supports tagged queueing my * cating (eg) /proc/scsi/acornscsi/0 and see if the SCSI revision is reported * as '2 TAG'. - * - * Also note that CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE is normally set in the config - * scripts, but disabled here. Once debugged, remove the #undef, otherwise to debug, - * comment out the undef. */ -#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + /* * SCSI-II Synchronous transfer support. * @@ -171,7 +167,7 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp, unsigned int result); static int acornscsi_reconnect_finish(AS_Host *host); static void acornscsi_dma_cleanup(AS_Host *host); -static void acornscsi_abortcmd(AS_Host *host, unsigned char tag); +static void acornscsi_abortcmd(AS_Host *host); /* ==================================================================================== * Miscellaneous @@ -741,17 +737,6 @@ intr_ret_t acornscsi_kick(AS_Host *host) #endif if (from_queue) { -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - /* - * tagged queueing - allocate a new tag to this command - */ - if (SCpnt->device->simple_tags) { - SCpnt->device->current_tag += 1; - if (SCpnt->device->current_tag == 0) - SCpnt->device->current_tag = 1; - SCpnt->tag = SCpnt->device->current_tag; - } else -#endif set_bit(SCpnt->device->id * 8 + (u8)(SCpnt->device->lun & 0x07), host->busyluns); @@ -1192,7 +1177,7 @@ void acornscsi_dma_intr(AS_Host *host) * the device recognises the attention. */ if (dmac_read(host, DMAC_STATUS) & STATUS_RQ0) { - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); dmac_write(host, DMAC_TXCNTLO, 0); dmac_write(host, DMAC_TXCNTHI, 0); @@ -1560,23 +1545,6 @@ void acornscsi_message(AS_Host *host) acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); switch (host->scsi.last_message) { -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - case HEAD_OF_QUEUE_TAG: - case ORDERED_QUEUE_TAG: - case SIMPLE_QUEUE_TAG: - /* - * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.17) - * If a target does not implement tagged queuing and a queue tag - * message is received, it shall respond with a MESSAGE REJECT - * message and accept the I/O process as if it were untagged. - */ - printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n", - host->host->host_no, acornscsi_target(host)); - host->SCpnt->device->simple_tags = 0; - set_bit(host->SCpnt->device->id * 8 + - (u8)(host->SCpnt->device->lun & 0x7), host->busyluns); - break; -#endif case EXTENDED_MESSAGE | (EXTENDED_SDTR << 8): /* * Target can't handle synchronous transfers @@ -1687,24 +1655,11 @@ void acornscsi_buildmessages(AS_Host *host) #if 0 /* does the device need the current command aborted */ if (cmd_aborted) { - acornscsi_abortcmd(host->SCpnt->tag); + acornscsi_abortcmd(host); return; } #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - if (host->SCpnt->tag) { - unsigned int tag_type; - - if (host->SCpnt->cmnd[0] == REQUEST_SENSE || - host->SCpnt->cmnd[0] == TEST_UNIT_READY || - host->SCpnt->cmnd[0] == INQUIRY) - tag_type = HEAD_OF_QUEUE_TAG; - else - tag_type = SIMPLE_QUEUE_TAG; - msgqueue_addmsg(&host->scsi.msgs, 2, tag_type, host->SCpnt->tag); - } -#endif #ifdef CONFIG_SCSI_ACORNSCSI_SYNC if (host->device[host->SCpnt->device->id].sync_state == SYNC_NEGOCIATE) { @@ -1798,7 +1753,7 @@ int acornscsi_reconnect(AS_Host *host) "to reconnect with\n", host->host->host_no, '0' + target); acornscsi_dumplog(host, target); - acornscsi_abortcmd(host, 0); + acornscsi_abortcmd(host); if (host->SCpnt) { queue_add_cmd_tail(&host->queues.disconnected, host->SCpnt); host->SCpnt = NULL; @@ -1821,7 +1776,7 @@ int acornscsi_reconnect_finish(AS_Host *host) host->scsi.disconnectable = 0; if (host->SCpnt->device->id == host->scsi.reconnected.target && host->SCpnt->device->lun == host->scsi.reconnected.lun && - host->SCpnt->tag == host->scsi.reconnected.tag) { + scsi_cmd_to_tag(host->SCpnt) == host->scsi.reconnected.tag) { #if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) DBG(host->SCpnt, printk("scsi%d.%c: reconnected", host->host->host_no, acornscsi_target(host))); @@ -1848,7 +1803,7 @@ int acornscsi_reconnect_finish(AS_Host *host) } if (!host->SCpnt) - acornscsi_abortcmd(host, host->scsi.reconnected.tag); + acornscsi_abortcmd(host); else { /* * Restore data pointer from SAVED pointers. @@ -1889,21 +1844,15 @@ void acornscsi_disconnect_unexpected(AS_Host *host) * Function: void acornscsi_abortcmd(AS_host *host, unsigned char tag) * Purpose : abort a currently executing command * Params : host - host with connected command to abort - * tag - tag to abort */ static -void acornscsi_abortcmd(AS_Host *host, unsigned char tag) +void acornscsi_abortcmd(AS_Host *host) { host->scsi.phase = PHASE_ABORTED; sbic_arm_write(host, SBIC_CMND, CMND_ASSERTATN); msgqueue_flush(&host->scsi.msgs); -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - if (tag) - msgqueue_addmsg(&host->scsi.msgs, 2, ABORT_TAG, tag); - else -#endif - msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); + msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); } /* ========================================================================================== @@ -1993,7 +1942,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTING, SSR %02X?\n", host->host->host_no, acornscsi_target(host), ssr); acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); } return INTR_PROCESSING; @@ -2029,7 +1978,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTED, SSR %02X?\n", host->host->host_no, acornscsi_target(host), ssr); acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); } return INTR_PROCESSING; @@ -2075,20 +2024,20 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x18: /* -> PHASE_DATAOUT */ /* COMMAND -> DATA OUT */ if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); acornscsi_dma_setup(host, DMA_OUT); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAOUT; return INTR_IDLE; case 0x19: /* -> PHASE_DATAIN */ /* COMMAND -> DATA IN */ if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); acornscsi_dma_setup(host, DMA_IN); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAIN; return INTR_IDLE; @@ -2156,7 +2105,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) /* MESSAGE IN -> DATA OUT */ acornscsi_dma_setup(host, DMA_OUT); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAOUT; return INTR_IDLE; @@ -2165,7 +2114,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) /* MESSAGE IN -> DATA IN */ acornscsi_dma_setup(host, DMA_IN); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAIN; return INTR_IDLE; @@ -2206,7 +2155,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) switch (ssr) { case 0x19: /* -> PHASE_DATAIN */ case 0x89: /* -> PHASE_DATAIN */ - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); return INTR_IDLE; case 0x1b: /* -> PHASE_STATUSIN */ @@ -2255,7 +2204,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) switch (ssr) { case 0x18: /* -> PHASE_DATAOUT */ case 0x88: /* -> PHASE_DATAOUT */ - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); return INTR_IDLE; case 0x1b: /* -> PHASE_STATUSIN */ @@ -2482,7 +2431,6 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt, SCpnt->scsi_done = done; SCpnt->host_scribble = NULL; SCpnt->result = 0; - SCpnt->tag = 0; SCpnt->SCp.phase = (int)acornscsi_datadirection(SCpnt->cmnd[0]); SCpnt->SCp.sent_command = 0; SCpnt->SCp.scsi_xferred = 0; @@ -2581,7 +2529,7 @@ static enum res_abort acornscsi_do_abort(AS_Host *host, struct scsi_cmnd *SCpnt) break; default: - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); res = res_snooze; } local_irq_restore(flags); @@ -2747,9 +2695,6 @@ char *acornscsi_info(struct Scsi_Host *host) #ifdef CONFIG_SCSI_ACORNSCSI_SYNC " SYNC" #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - " TAG" -#endif #if (DEBUG & DEBUG_NO_WRITE) " NOWRITE (" __stringify(NO_WRITE) ")" #endif @@ -2770,9 +2715,6 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance) #ifdef CONFIG_SCSI_ACORNSCSI_SYNC " SYNC" #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - " TAG" -#endif #if (DEBUG & DEBUG_NO_WRITE) " NOWRITE (" __stringify(NO_WRITE) ")" #endif @@ -2827,9 +2769,8 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance) seq_printf(m, "Device/Lun TaggedQ Sync\n"); seq_printf(m, " %d/%llu ", scd->id, scd->lun); if (scd->tagged_supported) - seq_printf(m, "%3sabled(%3d) ", - scd->simple_tags ? "en" : "dis", - scd->current_tag); + seq_printf(m, "%3sabled ", + scd->simple_tags ? "en" : "dis"); else seq_printf(m, "unsupported "); diff --git a/drivers/scsi/arm/queue.c b/drivers/scsi/arm/queue.c index e5559f27669d..c6f71a7d1b8e 100644 --- a/drivers/scsi/arm/queue.c +++ b/drivers/scsi/arm/queue.c @@ -214,7 +214,7 @@ struct scsi_cmnd *queue_remove_tgtluntag(Queue_t *queue, int target, int lun, list_for_each(l, &queue->head) { QE_t *q = list_entry(l, QE_t, list); if (q->SCpnt->device->id == target && q->SCpnt->device->lun == lun && - q->SCpnt->tag == tag) { + scsi_cmd_to_rq(q->SCpnt)->tag == tag) { SCpnt = __queue_remove(queue, l); break; } -- cgit v1.2.3 From a4869faf9642518145a8aa4b52e0d5ab0e7ee896 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:15 +0800 Subject: scsi: core: Remove 'current_tag' The 'current_tag' field in struct scsi_device is unused now; remove it. Link: https://lore.kernel.org/r/1631696835-136198-4-git-send-email-john.garry@huawei.com Reviewed-by: Bart Van Assche Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- include/scsi/scsi_device.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 09a17f6e93a7..b97e142a7ca9 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -146,7 +146,6 @@ struct scsi_device { struct scsi_vpd __rcu *vpd_pg83; struct scsi_vpd __rcu *vpd_pg80; struct scsi_vpd __rcu *vpd_pg89; - unsigned char current_tag; /* current tag */ struct scsi_target *sdev_target; blist_flags_t sdev_bflags; /* black/white flags as also found in -- cgit v1.2.3 From cdbc16c552f27ac211a44f9959d813b4f3188223 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:22:51 +0300 Subject: scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn() This scnprintf() uses the wrong limit. It should be "LPFC_FPIN_WWPN_LINE_SZ - len" instead of LPFC_FPIN_WWPN_LINE_SZ. Link: https://lore.kernel.org/r/20210916132251.GD25094@kili Fixes: 428569e66fa7 ("scsi: lpfc: Expand FPIN and RDF receive logging") Reviewed-by: James Smart Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f3fc79b99165..052c0e5b1119 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -9387,7 +9387,7 @@ lpfc_display_fpin_wwpn(struct lpfc_hba *phba, __be64 *wwnlist, u32 cnt) /* Extract the next WWPN from the payload */ wwn = *wwnlist++; wwpn = be64_to_cpu(wwn); - len += scnprintf(buf + len, LPFC_FPIN_WWPN_LINE_SZ, + len += scnprintf(buf + len, LPFC_FPIN_WWPN_LINE_SZ - len, " %016llx", wwpn); /* Log a message if we are on the last WWPN -- cgit v1.2.3 From 6dacc371b77f473770ec646e220303a84fe96c11 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:23:31 +0300 Subject: scsi: lpfc: Use correct scnprintf() limit The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not going to hit the limit so this fix will not affect runtime. Link: https://lore.kernel.org/r/20210916132331.GE25094@kili Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources") Reviewed-by: James Smart Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index b35bf70a8c0d..1e5a30eb04de 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6204,7 +6204,8 @@ lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr, len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n", phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt); - len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d SCSI: %d NVME: %d\n", + len += scnprintf(buf + len, PAGE_SIZE - len, + "Cfg: %d SCSI: %d NVME: %d\n", phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt, phba->cfg_nvme_seg_cnt); return len; -- cgit v1.2.3 From a38923f2d088d1a5cbaa86818abe039b2f87093d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:56:22 +0200 Subject: scsi: lpfc: Fix gcc -Wstringop-overread warning, again I fixed a stringop-overread warning earlier this year, now a second copy of the original code was added and the warning came back: drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show': drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread] 289 | strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it the same way as the other copy. Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org Fixes: ada48ba70f6b ("scsi: lpfc: Fix gcc -Wstringop-overread warning") Fixes: 74a7baa2a3ee ("scsi: lpfc: Add cmf_info sysfs entry") Reviewed-by: James Smart Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 1e5a30eb04de..ebe417921dac 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -285,11 +285,8 @@ buffer_done: "6312 Catching potential buffer " "overflow > PAGE_SIZE = %lu bytes\n", PAGE_SIZE); - strscpy(buf + PAGE_SIZE - 1 - - strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1), - LPFC_INFO_MORE_STR, - strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1) - + 1); + strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), + LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1); } return len; } -- cgit v1.2.3 From 9a8ef2c73c727a3c64b70c01697c578c7b10fed2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Sep 2021 19:32:06 +0100 Subject: scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT" There is a spelling mistake in a dev_err message. Fix it. Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/target/target_core_pr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 4b94b085625b..3829b61b56c1 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -269,7 +269,7 @@ target_scsi2_reservation_reserve(struct se_cmd *cmd) spin_lock(&dev->dev_reservation_lock); if (dev->reservation_holder && dev->reservation_holder->se_node_acl != sess->se_node_acl) { - pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n", + pr_err("SCSI-2 RESERVATION CONFLICT for %s fabric\n", tpg->se_tpg_tfo->fabric_name); pr_err("Original reserver LUN: %llu %s\n", cmd->se_lun->unpacked_lun, -- cgit v1.2.3 From fbdac19e642899455b4e64c63aafe2325df7aafa Mon Sep 17 00:00:00 2001 From: Wen Xiong Date: Thu, 16 Sep 2021 22:24:21 -0500 Subject: scsi: ses: Retry failed Send/Receive Diagnostic commands Setting SCSI logging level with error=3, we saw some errors from enclosues: [108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13 Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29). Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com Reviewed-by: Brian King Reviewed-by: James Bottomley Signed-off-by: Wen Xiong Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index c2afba2a5414..43e682297fd5 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -87,9 +87,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, 0 }; unsigned char recv_page_code; + unsigned int retries = SES_RETRIES; + struct scsi_sense_hdr sshdr; + + do { + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); - ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(ret)) return ret; @@ -121,9 +128,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + struct scsi_sense_hdr sshdr; + unsigned int retries = SES_RETRIES; + + do { + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); - result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result); -- cgit v1.2.3 From c8c1efe14a4aadcfe93a158b1272e48298d2de15 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 5 Sep 2021 02:00:48 +0200 Subject: ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut Cc: Shawn Guo Cc: Fabio Estevam Cc: NXP Linux Team Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53menlo.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index d3082b9774e4..48adcfd32cea 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -56,6 +56,7 @@ panel { compatible = "edt,etm0700g0dh6"; pinctrl-0 = <&pinctrl_display_gpio>; + pinctrl-names = "default"; enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; port { -- cgit v1.2.3 From f7d848e0fdfa557f181955a769cbb163d54fd292 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 22 Sep 2021 08:30:08 +0200 Subject: MAINTAINERS: usb, update Peter Korsgaard's entries Peter's e-mail in MAINTAINERS is defunct: This is the qmail-send program at a.mx.sunsite.dk. : Sorry, no mailbox here by that name. (#5.1.1) Peter says: ** Ahh yes, it should be changed to peter@korsgaard.com. However he also says: ** I haven't had access to c67x00 hw for quite some years though, so maybe ** it should be marked Orphan instead? So change as he wishes. Cc: Peter Korsgaard Cc: Linus Torvalds Cc: linux-usb@vger.kernel.org Acked-by: Peter Korsgaard Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210922063008.25758-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..d1bbaf06dc1d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19288,13 +19288,12 @@ S: Maintained F: drivers/usb/misc/chaoskey.c USB CYPRESS C67X00 DRIVER -M: Peter Korsgaard L: linux-usb@vger.kernel.org -S: Maintained +S: Orphan F: drivers/usb/c67x00/ USB DAVICOM DM9601 DRIVER -M: Peter Korsgaard +M: Peter Korsgaard L: netdev@vger.kernel.org S: Maintained W: http://www.linux-usb.org/usbnet -- cgit v1.2.3 From 22d65765f211cc83186fd8b87521159f354c0da9 Mon Sep 17 00:00:00 2001 From: Andrej Shadura Date: Thu, 16 Sep 2021 17:33:11 +0100 Subject: HID: u2fzero: ignore incomplete packets without data Since the actual_length calculation is performed unsigned, packets shorter than 7 bytes (e.g. packets without data or otherwise truncated) or non-received packets ("zero" bytes) can cause buffer overflow. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437 Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG") Signed-off-by: Andrej Shadura Signed-off-by: Jiri Kosina --- drivers/hid/hid-u2fzero.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c index 95e0807878c7..d70cd3d7f583 100644 --- a/drivers/hid/hid-u2fzero.c +++ b/drivers/hid/hid-u2fzero.c @@ -198,7 +198,9 @@ static int u2fzero_rng_read(struct hwrng *rng, void *data, } ret = u2fzero_recv(dev, &req, &resp); - if (ret < 0) + + /* ignore errors or packets without data */ + if (ret < offsetof(struct u2f_hid_msg, init.data)) return 0; /* only take the minimum amount of data it is safe to take */ -- cgit v1.2.3 From 5c187e2eb3f92daa38cb3d4ab45e1107ea34108e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 5 Sep 2021 02:01:37 +0200 Subject: ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut Cc: Shawn Guo Cc: Fabio Estevam Cc: NXP Linux Team Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53menlo.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 48adcfd32cea..4f88e96d81dd 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -77,8 +77,7 @@ regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio1 2 0>; }; }; -- cgit v1.2.3 From 450e7fe9b1b3c90eeed74a2fe0eeb13a7b57f3da Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 14 Sep 2021 14:17:15 -0300 Subject: ARM: dts: imx6qdl-pico: Fix Ethernet support Currently, it is no longer possible to retrieve a DHCP address on the imx6qdl-pico board. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 98670a0bb0ef14bbb3 ("ARM: dts: imx6qdl: Add imx6qdl-pico support") Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-pico.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi index 5de4ccb97916..f7a56d6b160c 100644 --- a/arch/arm/boot/dts/imx6qdl-pico.dtsi +++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi @@ -176,7 +176,18 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + reg = <1>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { -- cgit v1.2.3 From c54467482ffd407a4404c990697f432bfcb6cdc4 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Mon, 20 Sep 2021 16:49:31 +0200 Subject: ARM: imx_v6_v7_defconfig: enable fb Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS, CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G, CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO, CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8 and CONFIG_FONT_8x16. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Reviewed-by: Fabio Estevam Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index ccee86d0045d..5e4128dadd8d 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -292,6 +292,7 @@ CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_HDMI=y CONFIG_DRM_ETNAVIV=y CONFIG_DRM_MXSFB=y +CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y -- cgit v1.2.3 From cef0d022f55364d69017daeb9443bd31510ad6a2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 16 Aug 2021 12:41:19 +0200 Subject: gpiolib: acpi: Make set-debounce-timeout failures non fatal Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting GPIOs. This in itself is fine, but it also made gpio_set_debounce_timeout() errors fatal, causing the requesting of the GPIO to fail. This is causing regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO ACPI event sources specify a debouncy timeout of 20 ms, but the pinctrl-baytrail.c only supports certain fixed values, the closest ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL when specified a value which is not one of the fixed values. This is causing the acpi_request_own_gpiod() call to fail for 3 ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing e.g. the battery charging vs discharging status to never get updated, even though a charger has been plugged-in or unplugged. Make gpio_set_debounce_timeout() errors non fatal, warning about the failure instead, to fix this regression. Note we should probably also fix various pinctrl drivers to just pick the first bigger discrete value rather then returning -EINVAL but this will need to be done on a per driver basis, where as this fix at least gets us back to where things were before and thus restores functionality on devices where this was lost due to gpio_set_debounce_timeout() errors. Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper") Reviewed-by: Mika Westerberg Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-acpi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 411525ac4cc4..47712b6903b5 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip, ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout); if (ret) - gpiochip_free_own_desc(desc); + dev_warn(chip->parent, + "Failed to set debounce-timeout for pin 0x%04X, err %d\n", + pin, ret); - return ret ? ERR_PTR(ret) : desc; + return desc; } static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in) -- cgit v1.2.3 From 2dd824cca3407bc9a2bd11b00f6e117b66fcfcf1 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 16 Sep 2021 20:19:35 +0900 Subject: gpio: uniphier: Fix void functions to remove return value The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should be void. Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver") Signed-off-by: Kunihiko Hayashi Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-uniphier.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c index f99f3c10bed0..39dca147d587 100644 --- a/drivers/gpio/gpio-uniphier.c +++ b/drivers/gpio/gpio-uniphier.c @@ -184,7 +184,7 @@ static void uniphier_gpio_irq_mask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0); - return irq_chip_mask_parent(data); + irq_chip_mask_parent(data); } static void uniphier_gpio_irq_unmask(struct irq_data *data) @@ -194,7 +194,7 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask); - return irq_chip_unmask_parent(data); + irq_chip_unmask_parent(data); } static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type) -- cgit v1.2.3 From f6c35df22708438c94605b8896d2b4e4d5f342a3 Mon Sep 17 00:00:00 2001 From: Steven Lee Date: Tue, 7 Sep 2021 17:55:25 +0800 Subject: gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler. The current hwirq is calculated based on the old GPIO pin order(input GPIO range is from 0 to ngpios - 1). It should be calculated based on the current GPIO input pin order(input GPIOs are 0, 2, 4, ..., (ngpios - 1) * 2). Signed-off-by: Steven Lee Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-aspeed-sgpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c index 10f303d15225..3d6ef37a7702 100644 --- a/drivers/gpio/gpio-aspeed-sgpio.c +++ b/drivers/gpio/gpio-aspeed-sgpio.c @@ -395,7 +395,7 @@ static void aspeed_sgpio_irq_handler(struct irq_desc *desc) reg = ioread32(bank_reg(data, bank, reg_irq_status)); for_each_set_bit(p, ®, 32) - generic_handle_domain_irq(gc->irq.domain, i * 32 + p); + generic_handle_domain_irq(gc->irq.domain, i * 32 + p * 2); } chained_irq_exit(ic, desc); -- cgit v1.2.3 From 0f562b7de99085935d76b00c41ab5caa26ff5c74 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:23 +0200 Subject: gpio/rockchip: extended debounce support is only available on v2 The gpio driver runs into issues on v1 gpio blocks, as the db_clk and the whole extended debounce support is only ever defined on v2. So checking for the IS_ERR on the db_clk is not enough, as it will be NULL on v1. Fix this by adding the needed condition for v2 first before checking the existence of the db_clk. This caused my rk3288-veyron-pinky to enter a reboot loop when it tried to enable the power-key as adc-key device. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Signed-off-by: Heiko Stuebner Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 036b2d959503..16d9bf7188e3 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -195,7 +195,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc, unsigned int cur_div_reg; u64 div; - if (!IS_ERR(bank->db_clk)) { + if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) { div_debounce_support = true; freq = clk_get_rate(bank->db_clk); max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq; -- cgit v1.2.3 From b22a4705e2e60f342b1b851c9ebdb3ea02f21f8f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:24 +0200 Subject: gpio/rockchip: fix get_direction value handling The function uses the newly introduced rockchip_gpio_readl_bit() which directly returns the actual value of the requeste bit. So using the existing bit-wise check for the bit inside the value will always return 0. Fix this by dropping the bit manipulation on the result. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Signed-off-by: Heiko Stuebner Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 16d9bf7188e3..3335bd57761d 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -141,7 +141,7 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, u32 data; data = rockchip_gpio_readl_bit(bank, offset, bank->gpio_regs->port_ddr); - if (data & BIT(offset)) + if (data) return GPIO_LINE_DIRECTION_OUT; return GPIO_LINE_DIRECTION_IN; -- cgit v1.2.3 From 372d1f3e1bfede719864d0d1fbf3146b1e638c88 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Sep 2021 23:32:33 +0300 Subject: ext2: fix sleeping in atomic bugs on error The ext2_error() function syncs the filesystem so it sleeps. The caller is holding a spinlock so it's not allowed to sleep. ext2_statfs() <- disables preempt -> ext2_count_free_blocks() -> ext2_get_group_desc() Fix this by using WARN() to print an error message and a stack trace instead of using ext2_error(). Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter Signed-off-by: Jan Kara --- fs/ext2/balloc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c index 1f3f4326bf3c..c17ccc19b938 100644 --- a/fs/ext2/balloc.c +++ b/fs/ext2/balloc.c @@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, struct ext2_sb_info *sbi = EXT2_SB(sb); if (block_group >= sbi->s_groups_count) { - ext2_error (sb, "ext2_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); + WARN(1, "block_group >= groups_count - " + "block_group = %d, groups_count = %lu", + block_group, sbi->s_groups_count); return NULL; } @@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb); offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1); if (!sbi->s_group_desc[group_desc]) { - ext2_error (sb, "ext2_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); + WARN(1, "Group descriptor not loaded - " + "block_group = %d, group_desc = %lu, desc = %lu", + block_group, group_desc, offset); return NULL; } -- cgit v1.2.3 From 2a7313dc81e88adc7bb09d0f056985fa8afc2b89 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 22 Sep 2021 14:19:41 +0100 Subject: irqchip/armada-370-xp: Fix ack/eoi breakage When converting the driver to using handle_percpu_devid_irq, we forgot to repaint the irq_eoi() callback into irq_ack(), as handle_percpu_devid_fasteoi_ipi() was actually using EOI really early in the handling. Yes this was a stupid idea. Fix this by using the HW ack method as irq_ack(). Fixes: e52e73b7e9f7 ("irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()") Reported-by: Steffen Trumtrar Tested-by: Steffen Trumtrar Signed-off-by: Marc Zyngier Cc: Valentin Schneider Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuiexq5f.fsf@pengutronix.de --- drivers/irqchip/irq-armada-370-xp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 7557ab551295..53e0fb0562c1 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -359,16 +359,16 @@ static void armada_370_xp_ipi_send_mask(struct irq_data *d, ARMADA_370_XP_SW_TRIG_INT_OFFS); } -static void armada_370_xp_ipi_eoi(struct irq_data *d) +static void armada_370_xp_ipi_ack(struct irq_data *d) { writel(~BIT(d->hwirq), per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); } static struct irq_chip ipi_irqchip = { .name = "IPI", + .irq_ack = armada_370_xp_ipi_ack, .irq_mask = armada_370_xp_ipi_mask, .irq_unmask = armada_370_xp_ipi_unmask, - .irq_eoi = armada_370_xp_ipi_eoi, .ipi_send_mask = armada_370_xp_ipi_send_mask, }; -- cgit v1.2.3 From 20c36ce2164f1774b487d443ece99b754bc6ad43 Mon Sep 17 00:00:00 2001 From: Bixuan Cui Date: Thu, 16 Sep 2021 10:52:03 +0800 Subject: irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent The 'size' is used in struct_size(domain, revmap, size) and its input parameter type is 'size_t'(unsigned int). Changing the size to 'unsigned int' to make the type consistent. Signed-off-by: Bixuan Cui Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com --- include/linux/irqdomain.h | 2 +- kernel/irq/irqdomain.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 23e4ee523576..9ee238ad29ce 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -251,7 +251,7 @@ static inline struct fwnode_handle *irq_domain_alloc_fwnode(phys_addr_t *pa) } void irq_domain_free_fwnode(struct fwnode_handle *fwnode); -struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size, +struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size, irq_hw_number_t hwirq_max, int direct_max, const struct irq_domain_ops *ops, void *host_data); diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 62be16135e7c..bfa289ed57ab 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -136,7 +136,7 @@ EXPORT_SYMBOL_GPL(irq_domain_free_fwnode); * Allocates and initializes an irq_domain structure. * Returns pointer to IRQ domain, or NULL on failure. */ -struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size, +struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size, irq_hw_number_t hwirq_max, int direct_max, const struct irq_domain_ops *ops, void *host_data) -- cgit v1.2.3 From b99948836162b0cfb03007d9b2c2da9babc057b5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 4 Sep 2021 20:36:44 -0700 Subject: irqchip/mbigen: Repair non-kernel-doc notation Fix kernel-doc warnings in irq-mbigen.c: irq-mbigen.c:29: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * In mbigen vector register irq-mbigen.c:43: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * offset of clear register in mbigen node irq-mbigen.c:50: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * offset of interrupt type register Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Jun Ma Cc: Yun Wu Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Aditya Srivastava Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210905033644.15988-1-rdunlap@infradead.org --- drivers/irqchip/irq-mbigen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index f565317a3da3..12df2162108e 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -25,7 +25,7 @@ /* The maximum IRQ pin number of mbigen chip(start from 0) */ #define MAXIMUM_IRQ_PIN_NUM 1407 -/** +/* * In mbigen vector register * bit[21:12]: event id value * bit[11:0]: device id @@ -39,14 +39,14 @@ /* offset of vector register in mbigen node */ #define REG_MBIGEN_VEC_OFFSET 0x200 -/** +/* * offset of clear register in mbigen node * This register is used to clear the status * of interrupt */ #define REG_MBIGEN_CLEAR_OFFSET 0xa000 -/** +/* * offset of interrupt type register * This register is used to configure interrupt * trigger type -- cgit v1.2.3 From 969ac78db78c723a24e9410666b457cc1b0cb3c3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Sep 2021 09:25:19 -0700 Subject: irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol to fix build errors. Fixes these build errors: mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init': irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip' Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Miodrag Dinic Cc: Geert Uytterhoeven Cc: Bartosz Golaszewski Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Goran Ferenc Cc: Aleksandar Markovic Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org --- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 4d5924e9f766..aca7b595c4c7 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -409,6 +409,7 @@ config MESON_IRQ_GPIO config GOLDFISH_PIC bool "Goldfish programmable interrupt controller" depends on MIPS && (GOLDFISH || COMPILE_TEST) + select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Say yes here to enable Goldfish interrupt controller driver used -- cgit v1.2.3 From 280bef512933b2dda01d681d8cbe499b98fc5bdd Mon Sep 17 00:00:00 2001 From: Kaige Fu Date: Wed, 15 Sep 2021 10:20:55 +0800 Subject: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Kaige Fu [maz: fixed commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 7f40dca8cda5..eb0882d15366 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -4501,7 +4501,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq if (err) { if (i > 0) - its_vpe_irq_domain_free(domain, virq, i - 1); + its_vpe_irq_domain_free(domain, virq, i); its_lpi_free(bitmap, base, nr_ids); its_free_prop_table(vprop_page); -- cgit v1.2.3 From 3ce8c70ecedb4e1f1d36301afb0281be40390f13 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 15 Sep 2021 11:47:30 +0200 Subject: irqchip/renesas-rza1: Use semicolons instead of commas This code works, but it is cleaner to use semicolons at the end of statements instead of commas. Extracted from a big anonymous patch by Julia Lawall . Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulrich Hecht Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/b1710bb6ea5faa7a7fe74404adb0beb951e0bf8c.1631699160.git.geert+renesas@glider.be --- drivers/irqchip/irq-renesas-rza1.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/irqchip/irq-renesas-rza1.c b/drivers/irqchip/irq-renesas-rza1.c index b0d46ac42b89..72c06e883d1c 100644 --- a/drivers/irqchip/irq-renesas-rza1.c +++ b/drivers/irqchip/irq-renesas-rza1.c @@ -223,12 +223,12 @@ static int rza1_irqc_probe(struct platform_device *pdev) goto out_put_node; } - priv->chip.name = "rza1-irqc", - priv->chip.irq_mask = irq_chip_mask_parent, - priv->chip.irq_unmask = irq_chip_unmask_parent, - priv->chip.irq_eoi = rza1_irqc_eoi, - priv->chip.irq_retrigger = irq_chip_retrigger_hierarchy, - priv->chip.irq_set_type = rza1_irqc_set_type, + priv->chip.name = "rza1-irqc"; + priv->chip.irq_mask = irq_chip_mask_parent; + priv->chip.irq_unmask = irq_chip_unmask_parent; + priv->chip.irq_eoi = rza1_irqc_eoi; + priv->chip.irq_retrigger = irq_chip_retrigger_hierarchy; + priv->chip.irq_set_type = rza1_irqc_set_type; priv->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE; priv->irq_domain = irq_domain_add_hierarchy(parent, 0, IRQC_NUM_IRQ, -- cgit v1.2.3 From 1ea7812326004afd2803cc968a4776ae5120a597 Mon Sep 17 00:00:00 2001 From: Shai Malin Date: Wed, 22 Sep 2021 13:53:26 +0300 Subject: qed: rdma - don't wait for resources under hw error recovery flow If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Shai Malin Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++ drivers/net/ethernet/qlogic/qed/qed_roce.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c index fc8b3e64f153..186d0048a9d1 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c @@ -1297,6 +1297,14 @@ qed_iwarp_wait_cid_map_cleared(struct qed_hwfn *p_hwfn, struct qed_bmap *bmap) prev_weight = weight; while (weight) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid_map to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return 0; + msleep(QED_IWARP_MAX_CID_CLEAN_TIME); weight = bitmap_weight(bmap->bitmap, bmap->max_count); diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index f16a157bb95a..cf5baa5e59bc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -77,6 +77,14 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn) * Beyond the added delay we clear the bitmap anyway. */ while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid bitmap to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return; + msleep(100); if (wait_count++ > 20) { DP_NOTICE(p_hwfn, "cid bitmap wait timed out\n"); -- cgit v1.2.3 From 977d293e23b48a1129830d7968605f61c4af71a0 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 22 Sep 2021 13:12:17 +0200 Subject: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 2602f1386160..dbcebf56798f 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1316,7 +1316,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, goto alloc_skb; } - must_collapse = (info->size_goal - skb->len > 0) && + must_collapse = (info->size_goal > skb->len) && (skb_shinfo(skb)->nr_frags < sysctl_max_skb_frags); if (must_collapse) { size_bias = skb->len; @@ -1325,7 +1325,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, } alloc_skb: - if (!must_collapse && !ssk->sk_tx_skb_cache && + if (!must_collapse && !mptcp_alloc_tx_skb(sk, ssk, info->data_lock_held)) return 0; -- cgit v1.2.3 From b78f26926b17cc289e4f16b63363abe0aa2e8efc Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 10 Sep 2021 18:29:25 +0100 Subject: irqchip/gic: Work around broken Renesas integration Geert reported that the GIC driver locks up on a Renesas system since 005c34ae4b44f085 ("irqchip/gic: Atomically update affinity") fixed the driver to use writeb_relaxed() instead of writel_relaxed(). As it turns out, the interconnect used on this system mandates 32bit wide accesses for all MMIO transactions, even if the GIC architecture specifically mandates for some registers to be byte accessible. Gahhh... Work around the issue by crudly detecting the offending system, and falling back to an inefficient RMW+lock implementation. Reported-by: Geert Uytterhoeven Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9HiQ@mail.gmail.com --- drivers/irqchip/irq-gic.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d329ec3d64d8..5f22c9d65e57 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -107,6 +107,8 @@ static DEFINE_RAW_SPINLOCK(cpu_map_lock); #endif +static DEFINE_STATIC_KEY_FALSE(needs_rmw_access); + /* * The GIC mapping of CPU interfaces does not necessarily match * the logical CPU numbering. Let's use a mapping as returned @@ -774,6 +776,25 @@ static int gic_pm_init(struct gic_chip_data *gic) #endif #ifdef CONFIG_SMP +static void rmw_writeb(u8 bval, void __iomem *addr) +{ + static DEFINE_RAW_SPINLOCK(rmw_lock); + unsigned long offset = (unsigned long)addr & 3UL; + unsigned long shift = offset * 8; + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&rmw_lock, flags); + + addr -= offset; + val = readl_relaxed(addr); + val &= ~GENMASK(shift + 7, shift); + val |= bval << shift; + writel_relaxed(val, addr); + + raw_spin_unlock_irqrestore(&rmw_lock, flags); +} + static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { @@ -788,7 +809,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; - writeb_relaxed(gic_cpu_map[cpu], reg); + if (static_branch_unlikely(&needs_rmw_access)) + rmw_writeb(gic_cpu_map[cpu], reg); + else + writeb_relaxed(gic_cpu_map[cpu], reg); irq_data_update_effective_affinity(d, cpumask_of(cpu)); return IRQ_SET_MASK_OK_DONE; @@ -1375,6 +1399,30 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base) return true; } +static bool gic_enable_rmw_access(void *data) +{ + /* + * The EMEV2 class of machines has a broken interconnect, and + * locks up on accesses that are less than 32bit. So far, only + * the affinity setting requires it. + */ + if (of_machine_is_compatible("renesas,emev2")) { + static_branch_enable(&needs_rmw_access); + return true; + } + + return false; +} + +static const struct gic_quirk gic_quirks[] = { + { + .desc = "broken byte access", + .compatible = "arm,pl390", + .init = gic_enable_rmw_access, + }, + { }, +}; + static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) { if (!gic || !node) @@ -1391,6 +1439,8 @@ static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) if (of_property_read_u32(node, "cpu-offset", &gic->percpu_offset)) gic->percpu_offset = 0; + gic_enable_of_quirks(node, gic_quirks, gic); + return 0; error: -- cgit v1.2.3 From 8646e53633f314e4d746a988240d3b951a92f94a Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 1 Sep 2021 13:30:26 -0700 Subject: KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to transferring to a KVM guest, which is roughly equivalent to an exit to userspace and processes many of the same pending actions. While the task cannot be in an rseq critical section as the KVM path is reachable only by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a critical section still apply, e.g. the current CPU needs to be updated if the task is migrated. Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults and other badness in userspace VMMs that use rseq in combination with KVM, e.g. due to the CPU ID being stale after task migration. Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function") Reported-by: Peter Foley Bisected-by: Doug Evans Acked-by: Mathieu Desnoyers Cc: Shakeel Butt Cc: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20210901203030.1292304-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- kernel/entry/kvm.c | 4 +++- kernel/rseq.c | 14 +++++++++++--- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/kernel/entry/kvm.c b/kernel/entry/kvm.c index 49972ee99aff..049fd06b4c3d 100644 --- a/kernel/entry/kvm.c +++ b/kernel/entry/kvm.c @@ -19,8 +19,10 @@ static int xfer_to_guest_mode_work(struct kvm_vcpu *vcpu, unsigned long ti_work) if (ti_work & _TIF_NEED_RESCHED) schedule(); - if (ti_work & _TIF_NOTIFY_RESUME) + if (ti_work & _TIF_NOTIFY_RESUME) { tracehook_notify_resume(NULL); + rseq_handle_notify_resume(NULL, NULL); + } ret = arch_xfer_to_guest_mode_handle_work(vcpu, ti_work); if (ret) diff --git a/kernel/rseq.c b/kernel/rseq.c index 35f7bd0fced0..6d45ac3dae7f 100644 --- a/kernel/rseq.c +++ b/kernel/rseq.c @@ -282,9 +282,17 @@ void __rseq_handle_notify_resume(struct ksignal *ksig, struct pt_regs *regs) if (unlikely(t->flags & PF_EXITING)) return; - ret = rseq_ip_fixup(regs); - if (unlikely(ret < 0)) - goto error; + + /* + * regs is NULL if and only if the caller is in a syscall path. Skip + * fixup and leave rseq_cs as is so that rseq_sycall() will detect and + * kill a misbehaving userspace on debug kernels. + */ + if (regs) { + ret = rseq_ip_fixup(regs); + if (unlikely(ret < 0)) + goto error; + } if (unlikely(rseq_update_cpu_id(t))) goto error; return; -- cgit v1.2.3 From a68de80f61f6af397bc06fb391ff2e571c9c4d80 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 1 Sep 2021 13:30:27 -0700 Subject: entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume() Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now that the two function are always called back-to-back by architectures that have rseq. The rseq helper is stubbed out for architectures that don't support rseq, i.e. this is a nop across the board. Note, tracehook_notify_resume() is horribly named and arguably does not belong in tracehook.h as literally every line of code in it has nothing to do with tracing. But, that's been true since commit a42c6ded827d ("move key_repace_session_keyring() into tracehook_notify_resume()") first usurped tracehook_notify_resume() back in 2012. Punt cleaning that mess up to future patches. No functional change intended. Acked-by: Mathieu Desnoyers Signed-off-by: Sean Christopherson Message-Id: <20210901203030.1292304-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/arm/kernel/signal.c | 1 - arch/arm64/kernel/signal.c | 4 +--- arch/csky/kernel/signal.c | 4 +--- arch/mips/kernel/signal.c | 4 +--- arch/powerpc/kernel/signal.c | 4 +--- include/linux/tracehook.h | 2 ++ kernel/entry/common.c | 4 +--- kernel/entry/kvm.c | 4 +--- 8 files changed, 8 insertions(+), 19 deletions(-) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index d0a800be0486..a41e27ace391 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -628,7 +628,6 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) uprobe_notify_resume(regs); } else { tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); } } local_irq_disable(); diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 9fe70b12b34f..c287b9407f28 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -940,10 +940,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags) if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) do_signal(regs); - if (thread_flags & _TIF_NOTIFY_RESUME) { + if (thread_flags & _TIF_NOTIFY_RESUME) tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); - } if (thread_flags & _TIF_FOREIGN_FPSTATE) fpsimd_restore_current_state(); diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c index 312f046d452d..bc4238b9f709 100644 --- a/arch/csky/kernel/signal.c +++ b/arch/csky/kernel/signal.c @@ -260,8 +260,6 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) do_signal(regs); - if (thread_info_flags & _TIF_NOTIFY_RESUME) { + if (thread_info_flags & _TIF_NOTIFY_RESUME) tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); - } } diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index f1e985109da0..c9b2a75563e1 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -906,10 +906,8 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) do_signal(regs); - if (thread_info_flags & _TIF_NOTIFY_RESUME) { + if (thread_info_flags & _TIF_NOTIFY_RESUME) tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); - } user_enter(); } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index e600764a926c..b93b87df499d 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -293,10 +293,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) do_signal(current); } - if (thread_info_flags & _TIF_NOTIFY_RESUME) { + if (thread_info_flags & _TIF_NOTIFY_RESUME) tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); - } } static unsigned long get_tm_stackpointer(struct task_struct *tsk) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 3e80c4bc66f7..2564b7434b4d 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -197,6 +197,8 @@ static inline void tracehook_notify_resume(struct pt_regs *regs) mem_cgroup_handle_over_high(); blkcg_maybe_throttle_current(); + + rseq_handle_notify_resume(NULL, regs); } /* diff --git a/kernel/entry/common.c b/kernel/entry/common.c index bf16395b9e13..d5a61d565ad5 100644 --- a/kernel/entry/common.c +++ b/kernel/entry/common.c @@ -171,10 +171,8 @@ static unsigned long exit_to_user_mode_loop(struct pt_regs *regs, if (ti_work & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) handle_signal_work(regs, ti_work); - if (ti_work & _TIF_NOTIFY_RESUME) { + if (ti_work & _TIF_NOTIFY_RESUME) tracehook_notify_resume(regs); - rseq_handle_notify_resume(NULL, regs); - } /* Architecture specific TIF work */ arch_exit_to_user_mode_work(regs, ti_work); diff --git a/kernel/entry/kvm.c b/kernel/entry/kvm.c index 049fd06b4c3d..49972ee99aff 100644 --- a/kernel/entry/kvm.c +++ b/kernel/entry/kvm.c @@ -19,10 +19,8 @@ static int xfer_to_guest_mode_work(struct kvm_vcpu *vcpu, unsigned long ti_work) if (ti_work & _TIF_NEED_RESCHED) schedule(); - if (ti_work & _TIF_NOTIFY_RESUME) { + if (ti_work & _TIF_NOTIFY_RESUME) tracehook_notify_resume(NULL); - rseq_handle_notify_resume(NULL, NULL); - } ret = arch_xfer_to_guest_mode_handle_work(vcpu, ti_work); if (ret) -- cgit v1.2.3 From de5f4213dafa8f8b0b52cdaf06bb35ad4cab1681 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 1 Sep 2021 13:30:28 -0700 Subject: tools: Move x86 syscall number fallbacks to .../uapi/ Move unistd_{32,64}.h from x86/include/asm to x86/include/uapi/asm so that tools/selftests that install kernel headers, e.g. KVM selftests, can include non-uapi tools headers, e.g. to get 'struct list_head', without effectively overriding the installed non-tool uapi headers. Swapping KVM's search order, e.g. to search the kernel headers before tool headers, is not a viable option as doing results in linux/type.h and other core headers getting pulled from the kernel headers, which do not have the kernel-internal typedefs that are used through tools, including many files outside of selftests/kvm's control. Prior to commit cec07f53c398 ("perf tools: Move syscall number fallbacks from perf-sys.h to tools/arch/x86/include/asm/"), the handcoded numbers were actual fallbacks, i.e. overriding unistd_{32,64}.h from the kernel headers was unintentional. Signed-off-by: Sean Christopherson Message-Id: <20210901203030.1292304-4-seanjc@google.com> Signed-off-by: Paolo Bonzini --- tools/arch/x86/include/asm/unistd_32.h | 16 ---------------- tools/arch/x86/include/asm/unistd_64.h | 19 ------------------- tools/arch/x86/include/uapi/asm/unistd_32.h | 16 ++++++++++++++++ tools/arch/x86/include/uapi/asm/unistd_64.h | 19 +++++++++++++++++++ 4 files changed, 35 insertions(+), 35 deletions(-) delete mode 100644 tools/arch/x86/include/asm/unistd_32.h delete mode 100644 tools/arch/x86/include/asm/unistd_64.h create mode 100644 tools/arch/x86/include/uapi/asm/unistd_32.h create mode 100644 tools/arch/x86/include/uapi/asm/unistd_64.h diff --git a/tools/arch/x86/include/asm/unistd_32.h b/tools/arch/x86/include/asm/unistd_32.h deleted file mode 100644 index 60a89dba01b6..000000000000 --- a/tools/arch/x86/include/asm/unistd_32.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __NR_perf_event_open -# define __NR_perf_event_open 336 -#endif -#ifndef __NR_futex -# define __NR_futex 240 -#endif -#ifndef __NR_gettid -# define __NR_gettid 224 -#endif -#ifndef __NR_getcpu -# define __NR_getcpu 318 -#endif -#ifndef __NR_setns -# define __NR_setns 346 -#endif diff --git a/tools/arch/x86/include/asm/unistd_64.h b/tools/arch/x86/include/asm/unistd_64.h deleted file mode 100644 index 4205ed4158bf..000000000000 --- a/tools/arch/x86/include/asm/unistd_64.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __NR_userfaultfd -#define __NR_userfaultfd 282 -#endif -#ifndef __NR_perf_event_open -# define __NR_perf_event_open 298 -#endif -#ifndef __NR_futex -# define __NR_futex 202 -#endif -#ifndef __NR_gettid -# define __NR_gettid 186 -#endif -#ifndef __NR_getcpu -# define __NR_getcpu 309 -#endif -#ifndef __NR_setns -#define __NR_setns 308 -#endif diff --git a/tools/arch/x86/include/uapi/asm/unistd_32.h b/tools/arch/x86/include/uapi/asm/unistd_32.h new file mode 100644 index 000000000000..60a89dba01b6 --- /dev/null +++ b/tools/arch/x86/include/uapi/asm/unistd_32.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __NR_perf_event_open +# define __NR_perf_event_open 336 +#endif +#ifndef __NR_futex +# define __NR_futex 240 +#endif +#ifndef __NR_gettid +# define __NR_gettid 224 +#endif +#ifndef __NR_getcpu +# define __NR_getcpu 318 +#endif +#ifndef __NR_setns +# define __NR_setns 346 +#endif diff --git a/tools/arch/x86/include/uapi/asm/unistd_64.h b/tools/arch/x86/include/uapi/asm/unistd_64.h new file mode 100644 index 000000000000..4205ed4158bf --- /dev/null +++ b/tools/arch/x86/include/uapi/asm/unistd_64.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __NR_userfaultfd +#define __NR_userfaultfd 282 +#endif +#ifndef __NR_perf_event_open +# define __NR_perf_event_open 298 +#endif +#ifndef __NR_futex +# define __NR_futex 202 +#endif +#ifndef __NR_gettid +# define __NR_gettid 186 +#endif +#ifndef __NR_getcpu +# define __NR_getcpu 309 +#endif +#ifndef __NR_setns +#define __NR_setns 308 +#endif -- cgit v1.2.3 From 61e52f1630f54713f5dffa1ab4bb49772235aa5a Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 1 Sep 2021 13:30:29 -0700 Subject: KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs Add a test to verify an rseq's CPU ID is updated correctly if the task is migrated while the kernel is handling KVM_RUN. This is a regression test for a bug introduced by commit 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM without updating rseq, leading to a stale CPU ID and other badness. Signed-off-by: Sean Christopherson Acked-by: Mathieu Desnoyers Message-Id: <20210901203030.1292304-5-seanjc@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 3 + tools/testing/selftests/kvm/rseq_test.c | 236 ++++++++++++++++++++++++++++++++ 3 files changed, 240 insertions(+) create mode 100644 tools/testing/selftests/kvm/rseq_test.c diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 98053d3afbda..618bf9bc7f3f 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -48,6 +48,7 @@ /kvm_page_table_test /memslot_modification_stress_test /memslot_perf_test +/rseq_test /set_memory_region_test /steal_time /kvm_binary_stats_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 5d05801ab816..9ac325cfc94a 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -80,6 +80,7 @@ TEST_GEN_PROGS_x86_64 += kvm_create_max_vcpus TEST_GEN_PROGS_x86_64 += kvm_page_table_test TEST_GEN_PROGS_x86_64 += memslot_modification_stress_test TEST_GEN_PROGS_x86_64 += memslot_perf_test +TEST_GEN_PROGS_x86_64 += rseq_test TEST_GEN_PROGS_x86_64 += set_memory_region_test TEST_GEN_PROGS_x86_64 += steal_time TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test @@ -93,6 +94,7 @@ TEST_GEN_PROGS_aarch64 += dirty_log_test TEST_GEN_PROGS_aarch64 += dirty_log_perf_test TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus TEST_GEN_PROGS_aarch64 += kvm_page_table_test +TEST_GEN_PROGS_aarch64 += rseq_test TEST_GEN_PROGS_aarch64 += set_memory_region_test TEST_GEN_PROGS_aarch64 += steal_time TEST_GEN_PROGS_aarch64 += kvm_binary_stats_test @@ -104,6 +106,7 @@ TEST_GEN_PROGS_s390x += demand_paging_test TEST_GEN_PROGS_s390x += dirty_log_test TEST_GEN_PROGS_s390x += kvm_create_max_vcpus TEST_GEN_PROGS_s390x += kvm_page_table_test +TEST_GEN_PROGS_s390x += rseq_test TEST_GEN_PROGS_s390x += set_memory_region_test TEST_GEN_PROGS_s390x += kvm_binary_stats_test diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c new file mode 100644 index 000000000000..060538bd405a --- /dev/null +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only +#define _GNU_SOURCE /* for program_invocation_short_name */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "kvm_util.h" +#include "processor.h" +#include "test_util.h" + +#define VCPU_ID 0 + +static __thread volatile struct rseq __rseq = { + .cpu_id = RSEQ_CPU_ID_UNINITIALIZED, +}; + +/* + * Use an arbitrary, bogus signature for configuring rseq, this test does not + * actually enter an rseq critical section. + */ +#define RSEQ_SIG 0xdeadbeef + +/* + * Any bug related to task migration is likely to be timing-dependent; perform + * a large number of migrations to reduce the odds of a false negative. + */ +#define NR_TASK_MIGRATIONS 100000 + +static pthread_t migration_thread; +static cpu_set_t possible_mask; +static bool done; + +static atomic_t seq_cnt; + +static void guest_code(void) +{ + for (;;) + GUEST_SYNC(0); +} + +static void sys_rseq(int flags) +{ + int r; + + r = syscall(__NR_rseq, &__rseq, sizeof(__rseq), flags, RSEQ_SIG); + TEST_ASSERT(!r, "rseq failed, errno = %d (%s)", errno, strerror(errno)); +} + +static void *migration_worker(void *ign) +{ + cpu_set_t allowed_mask; + int r, i, nr_cpus, cpu; + + CPU_ZERO(&allowed_mask); + + nr_cpus = CPU_COUNT(&possible_mask); + + for (i = 0; i < NR_TASK_MIGRATIONS; i++) { + cpu = i % nr_cpus; + if (!CPU_ISSET(cpu, &possible_mask)) + continue; + + CPU_SET(cpu, &allowed_mask); + + /* + * Bump the sequence count twice to allow the reader to detect + * that a migration may have occurred in between rseq and sched + * CPU ID reads. An odd sequence count indicates a migration + * is in-progress, while a completely different count indicates + * a migration occurred since the count was last read. + */ + atomic_inc(&seq_cnt); + + /* + * Ensure the odd count is visible while sched_getcpu() isn't + * stable, i.e. while changing affinity is in-progress. + */ + smp_wmb(); + r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", + errno, strerror(errno)); + smp_wmb(); + atomic_inc(&seq_cnt); + + CPU_CLR(cpu, &allowed_mask); + + /* + * Wait 1-10us before proceeding to the next iteration and more + * specifically, before bumping seq_cnt again. A delay is + * needed on three fronts: + * + * 1. To allow sched_setaffinity() to prompt migration before + * ioctl(KVM_RUN) enters the guest so that TIF_NOTIFY_RESUME + * (or TIF_NEED_RESCHED, which indirectly leads to handling + * NOTIFY_RESUME) is handled in KVM context. + * + * If NOTIFY_RESUME/NEED_RESCHED is set after KVM enters + * the guest, the guest will trigger a IO/MMIO exit all the + * way to userspace and the TIF flags will be handled by + * the generic "exit to userspace" logic, not by KVM. The + * exit to userspace is necessary to give the test a chance + * to check the rseq CPU ID (see #2). + * + * Alternatively, guest_code() could include an instruction + * to trigger an exit that is handled by KVM, but any such + * exit requires architecture specific code. + * + * 2. To let ioctl(KVM_RUN) make its way back to the test + * before the next round of migration. The test's check on + * the rseq CPU ID must wait for migration to complete in + * order to avoid false positive, thus any kernel rseq bug + * will be missed if the next migration starts before the + * check completes. + * + * 3. To ensure the read-side makes efficient forward progress, + * e.g. if sched_getcpu() involves a syscall. Stalling the + * read-side means the test will spend more time waiting for + * sched_getcpu() to stabilize and less time trying to hit + * the timing-dependent bug. + * + * Because any bug in this area is likely to be timing-dependent, + * run with a range of delays at 1us intervals from 1us to 10us + * as a best effort to avoid tuning the test to the point where + * it can hit _only_ the original bug and not detect future + * regressions. + * + * The original bug can reproduce with a delay up to ~500us on + * x86-64, but starts to require more iterations to reproduce + * as the delay creeps above ~10us, and the average runtime of + * each iteration obviously increases as well. Cap the delay + * at 10us to keep test runtime reasonable while minimizing + * potential coverage loss. + * + * The lower bound for reproducing the bug is likely below 1us, + * e.g. failures occur on x86-64 with nanosleep(0), but at that + * point the overhead of the syscall likely dominates the delay. + * Use usleep() for simplicity and to avoid unnecessary kernel + * dependencies. + */ + usleep((i % 10) + 1); + } + done = true; + return NULL; +} + +int main(int argc, char *argv[]) +{ + int r, i, snapshot; + struct kvm_vm *vm; + u32 cpu, rseq_cpu; + + /* Tell stdout not to buffer its content */ + setbuf(stdout, NULL); + + r = sched_getaffinity(0, sizeof(possible_mask), &possible_mask); + TEST_ASSERT(!r, "sched_getaffinity failed, errno = %d (%s)", errno, + strerror(errno)); + + if (CPU_COUNT(&possible_mask) < 2) { + print_skip("Only one CPU, task migration not possible\n"); + exit(KSFT_SKIP); + } + + sys_rseq(0); + + /* + * Create and run a dummy VM that immediately exits to userspace via + * GUEST_SYNC, while concurrently migrating the process by setting its + * CPU affinity. + */ + vm = vm_create_default(VCPU_ID, 0, guest_code); + + pthread_create(&migration_thread, NULL, migration_worker, 0); + + for (i = 0; !done; i++) { + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC, + "Guest failed?"); + + /* + * Verify rseq's CPU matches sched's CPU. Ensure migration + * doesn't occur between sched_getcpu() and reading the rseq + * cpu_id by rereading both if the sequence count changes, or + * if the count is odd (migration in-progress). + */ + do { + /* + * Drop bit 0 to force a mismatch if the count is odd, + * i.e. if a migration is in-progress. + */ + snapshot = atomic_read(&seq_cnt) & ~1; + + /* + * Ensure reading sched_getcpu() and rseq.cpu_id + * complete in a single "no migration" window, i.e. are + * not reordered across the seq_cnt reads. + */ + smp_rmb(); + cpu = sched_getcpu(); + rseq_cpu = READ_ONCE(__rseq.cpu_id); + smp_rmb(); + } while (snapshot != atomic_read(&seq_cnt)); + + TEST_ASSERT(rseq_cpu == cpu, + "rseq CPU = %d, sched CPU = %d\n", rseq_cpu, cpu); + } + + /* + * Sanity check that the test was able to enter the guest a reasonable + * number of times, e.g. didn't get stalled too often/long waiting for + * sched_getcpu() to stabilize. A 2:1 migration:KVM_RUN ratio is a + * fairly conservative ratio on x86-64, which can do _more_ KVM_RUNs + * than migrations given the 1us+ delay in the migration task. + */ + TEST_ASSERT(i > (NR_TASK_MIGRATIONS / 2), + "Only performed %d KVM_RUNs, task stalled too much?\n", i); + + pthread_join(migration_thread, NULL); + + kvm_vm_free(vm); + + sys_rseq(RSEQ_FLAG_UNREGISTER); + + return 0; +} -- cgit v1.2.3 From 2da4a23599c263bd4a7658c2fe561cb3a73ea6ae Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 1 Sep 2021 13:30:30 -0700 Subject: KVM: selftests: Remove __NR_userfaultfd syscall fallback Revert the __NR_userfaultfd syscall fallback added for KVM selftests now that x86's unistd_{32,63}.h overrides are under uapi/ and thus not in KVM selftests' search path, i.e. now that KVM gets x86 syscall numbers from the installed kernel headers. No functional change intended. Reviewed-by: Ben Gardon Signed-off-by: Sean Christopherson Message-Id: <20210901203030.1292304-6-seanjc@google.com> Signed-off-by: Paolo Bonzini --- tools/arch/x86/include/uapi/asm/unistd_64.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/arch/x86/include/uapi/asm/unistd_64.h b/tools/arch/x86/include/uapi/asm/unistd_64.h index 4205ed4158bf..cb52a3a8b8fc 100644 --- a/tools/arch/x86/include/uapi/asm/unistd_64.h +++ b/tools/arch/x86/include/uapi/asm/unistd_64.h @@ -1,7 +1,4 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __NR_userfaultfd -#define __NR_userfaultfd 282 -#endif #ifndef __NR_perf_event_open # define __NR_perf_event_open 298 #endif -- cgit v1.2.3 From 7117003fe4e3c8977744f2ad33bb95fd3e10023f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 20 Sep 2021 17:02:54 -0700 Subject: KVM: x86: Mark all registers as avail/dirty at vCPU creation Mark all registers as available and dirty at vCPU creation, as the vCPU has obviously not been loaded into hardware, let alone been given the chance to be modified in hardware. On SVM, reading from "uninitialized" hardware is a non-issue as VMCBs are zero allocated (thus not truly uninitialized) and hardware does not allow for arbitrary field encoding schemes. On VMX, backing memory for VMCSes is also zero allocated, but true initialization of the VMCS _technically_ requires VMWRITEs, as the VMX architectural specification technically allows CPU implementations to encode fields with arbitrary schemes. E.g. a CPU could theoretically store the inverted value of every field, which would result in VMREAD to a zero-allocated field returns all ones. In practice, only the AR_BYTES fields are known to be manipulated by hardware during VMREAD/VMREAD; no known hardware or VMM (for nested VMX) does fancy encoding of cacheable field values (CR0, CR3, CR4, etc...). In other words, this is technically a bug fix, but practically speakings it's a glorified nop. Failure to mark registers as available has been a lurking bug for quite some time. The original register caching supported only GPRs (+RIP, which is kinda sorta a GPR), with the masks initialized at ->vcpu_reset(). That worked because the two cacheable registers, RIP and RSP, are generally speaking not read as side effects in other flows. Arguably, commit aff48baa34c0 ("KVM: Fetch guest cr3 from hardware on demand") was the first instance of failure to mark regs available. While _just_ marking CR3 available during vCPU creation wouldn't have fixed the VMREAD from an uninitialized VMCS bug because ept_update_paging_mode_cr0() unconditionally read vmcs.GUEST_CR3, marking CR3 _and_ intentionally not reading GUEST_CR3 when it's available would have avoided VMREAD to a technically-uninitialized VMCS. Fixes: aff48baa34c0 ("KVM: Fetch guest cr3 from hardware on demand") Fixes: 6de4f3ada40b ("KVM: Cache pdptrs") Fixes: 6de12732c42c ("KVM: VMX: Optimize vmx_get_rflags()") Fixes: 2fb92db1ec08 ("KVM: VMX: Cache vmcs segment fields") Fixes: bd31fe495d0d ("KVM: VMX: Add proper cache tracking for CR0") Fixes: f98c1e77127d ("KVM: VMX: Add proper cache tracking for CR4") Fixes: 5addc235199f ("KVM: VMX: Cache vmcs.EXIT_QUALIFICATION using arch avail_reg flags") Fixes: 8791585837f6 ("KVM: VMX: Cache vmcs.EXIT_INTR_INFO using arch avail_reg flags") Signed-off-by: Sean Christopherson Message-Id: <20210921000303.400537-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 28ef14155726..06026f3d7ea2 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10652,6 +10652,8 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu) int r; vcpu->arch.last_vmentry_cpu = -1; + vcpu->arch.regs_avail = ~0; + vcpu->arch.regs_dirty = ~0; if (!irqchip_in_kernel(vcpu->kvm) || kvm_vcpu_is_reset_bsp(vcpu)) vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; -- cgit v1.2.3 From 03a6e84069d1870f5b3d360e64cb330b66f76dee Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 20 Sep 2021 17:02:55 -0700 Subject: KVM: x86: Clear KVM's cached guest CR3 at RESET/INIT Explicitly zero the guest's CR3 and mark it available+dirty at RESET/INIT. Per Intel's SDM and AMD's APM, CR3 is zeroed at both RESET and INIT. For RESET, this is a nop as vcpu is zero-allocated. For INIT, the bug has likely escaped notice because no firmware/kernel puts its page tables root at PA=0, let alone relies on INIT to get the desired CR3 for such page tables. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20210921000303.400537-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 06026f3d7ea2..8a83dd1b882e 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10895,6 +10895,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) kvm_set_rflags(vcpu, X86_EFLAGS_FIXED); kvm_rip_write(vcpu, 0xfff0); + vcpu->arch.cr3 = 0; + kvm_register_mark_dirty(vcpu, VCPU_EXREG_CR3); + /* * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions * of Intel's SDM list CD/NW as being set on INIT, but they contradict -- cgit v1.2.3 From 90b54129e8df909ccca527b2d69bcb1f0216aa8f Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Tue, 21 Sep 2021 17:11:20 +0000 Subject: selftests: KVM: Fix check for !POLLIN in demand_paging_test The logical not operator applies only to the left hand side of a bitwise operator. As such, the check for POLLIN not being set in revents wrong. Fix it by adding parentheses around the bitwise expression. Fixes: 4f72180eb4da ("KVM: selftests: Add demand paging content to the demand paging test") Reviewed-by: Andrew Jones Signed-off-by: Oliver Upton Message-Id: <20210921171121.2148982-2-oupton@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/demand_paging_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/demand_paging_test.c b/tools/testing/selftests/kvm/demand_paging_test.c index e79c1b64977f..10edae425ab3 100644 --- a/tools/testing/selftests/kvm/demand_paging_test.c +++ b/tools/testing/selftests/kvm/demand_paging_test.c @@ -179,7 +179,7 @@ static void *uffd_handler_thread_fn(void *arg) return NULL; } - if (!pollfd[0].revents & POLLIN) + if (!(pollfd[0].revents & POLLIN)) continue; r = read(uffd, &msg, sizeof(msg)); -- cgit v1.2.3 From 01f91acb55be7aac3950b89c458bcea9ef6e4f49 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Tue, 21 Sep 2021 17:11:21 +0000 Subject: selftests: KVM: Align SMCCC call with the spec in steal_time The SMC64 calling convention passes a function identifier in w0 and its parameters in x1-x17. Given this, there are two deviations in the SMC64 call performed by the steal_time test: the function identifier is assigned to a 64 bit register and the parameter is only 32 bits wide. Align the call with the SMCCC by using a 32 bit register to handle the function identifier and increasing the parameter width to 64 bits. Suggested-by: Andrew Jones Signed-off-by: Oliver Upton Reviewed-by: Andrew Jones Message-Id: <20210921171121.2148982-3-oupton@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/steal_time.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index ecec30865a74..aafaa8e38b7c 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -118,12 +118,12 @@ struct st_time { uint64_t st_time; }; -static int64_t smccc(uint32_t func, uint32_t arg) +static int64_t smccc(uint32_t func, uint64_t arg) { unsigned long ret; asm volatile( - "mov x0, %1\n" + "mov w0, %w1\n" "mov x1, %2\n" "hvc #0\n" "mov %0, x0\n" -- cgit v1.2.3 From cd36ae8761775e78154ba6bd7a3bd2ab538c589f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 7 Sep 2021 17:24:01 -0700 Subject: KVM: VMX: Remove defunct "nr_active_uret_msrs" field Remove vcpu_vmx.nr_active_uret_msrs and its associated comment, which are both defunct now that KVM keeps the list constant and instead explicitly tracks which entries need to be loaded into hardware. No functional change intended. Fixes: ee9d22e08d13 ("KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list") Signed-off-by: Sean Christopherson Message-Id: <20210908002401.1947049-1-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h index 4858c5fd95f2..02ab3468885f 100644 --- a/arch/x86/kvm/vmx/vmx.h +++ b/arch/x86/kvm/vmx/vmx.h @@ -248,12 +248,8 @@ struct vcpu_vmx { * only loaded into hardware when necessary, e.g. SYSCALL #UDs outside * of 64-bit mode or if EFER.SCE=1, thus the SYSCALL MSRs don't need to * be loaded into hardware if those conditions aren't met. - * nr_active_uret_msrs tracks the number of MSRs that need to be loaded - * into hardware when running the guest. guest_uret_msrs[] is resorted - * whenever the number of "active" uret MSRs is modified. */ struct vmx_uret_msr guest_uret_msrs[MAX_NR_USER_RETURN_MSRS]; - int nr_active_uret_msrs; bool guest_uret_msrs_loaded; #ifdef CONFIG_X86_64 u64 msr_host_kernel_gs_base; -- cgit v1.2.3 From eb7511bf9182292ef1df1082d23039e856d1ddfb Mon Sep 17 00:00:00 2001 From: Haimin Zhang Date: Fri, 3 Sep 2021 10:37:06 +0800 Subject: KVM: x86: Handle SRCU initialization failure during page track init Check the return of init_srcu_struct(), which can fail due to OOM, when initializing the page track mechanism. Lack of checking leads to a NULL pointer deref found by a modified syzkaller. Reported-by: TCS Robot Signed-off-by: Haimin Zhang Message-Id: <1630636626-12262-1-git-send-email-tcs_kernel@tencent.com> [Move the call towards the beginning of kvm_arch_init_vm. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_page_track.h | 2 +- arch/x86/kvm/mmu/page_track.c | 4 ++-- arch/x86/kvm/x86.c | 7 ++++++- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/kvm_page_track.h b/arch/x86/include/asm/kvm_page_track.h index 87bd6025d91d..6a5f3acf2b33 100644 --- a/arch/x86/include/asm/kvm_page_track.h +++ b/arch/x86/include/asm/kvm_page_track.h @@ -46,7 +46,7 @@ struct kvm_page_track_notifier_node { struct kvm_page_track_notifier_node *node); }; -void kvm_page_track_init(struct kvm *kvm); +int kvm_page_track_init(struct kvm *kvm); void kvm_page_track_cleanup(struct kvm *kvm); void kvm_page_track_free_memslot(struct kvm_memory_slot *slot); diff --git a/arch/x86/kvm/mmu/page_track.c b/arch/x86/kvm/mmu/page_track.c index 269f11f92fd0..21427e84a82e 100644 --- a/arch/x86/kvm/mmu/page_track.c +++ b/arch/x86/kvm/mmu/page_track.c @@ -164,13 +164,13 @@ void kvm_page_track_cleanup(struct kvm *kvm) cleanup_srcu_struct(&head->track_srcu); } -void kvm_page_track_init(struct kvm *kvm) +int kvm_page_track_init(struct kvm *kvm) { struct kvm_page_track_notifier_head *head; head = &kvm->arch.track_notifier_head; - init_srcu_struct(&head->track_srcu); INIT_HLIST_HEAD(&head->track_notifier_list); + return init_srcu_struct(&head->track_srcu); } /* diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8a83dd1b882e..42c5c7a195ae 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -11144,9 +11144,15 @@ void kvm_arch_free_vm(struct kvm *kvm) int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { + int ret; + if (type) return -EINVAL; + ret = kvm_page_track_init(kvm); + if (ret) + return ret; + INIT_HLIST_HEAD(&kvm->arch.mask_notifier_list); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); INIT_LIST_HEAD(&kvm->arch.zapped_obsolete_pages); @@ -11179,7 +11185,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) kvm_apicv_init(kvm); kvm_hv_init_vm(kvm); - kvm_page_track_init(kvm); kvm_mmu_init_vm(kvm); kvm_xen_init_vm(kvm); -- cgit v1.2.3 From ed7023a11bd820fca50e61911a670ddf3e01f73f Mon Sep 17 00:00:00 2001 From: Yu Zhang Date: Thu, 9 Sep 2021 01:17:31 +0800 Subject: KVM: nVMX: fix comments of handle_vmon() "VMXON pointer" is saved in vmx->nested.vmxon_ptr since commit 3573e22cfeca ("KVM: nVMX: additional checks on vmxon region"). Also, handle_vmptrld() & handle_vmclear() now have logic to check the VMCS pointer against the VMXON pointer. So just remove the obsolete comments of handle_vmon(). Signed-off-by: Yu Zhang Message-Id: <20210908171731.18885-1-yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/nested.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index ccb03d69546c..35cd938afa1d 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4899,14 +4899,7 @@ out_vmcs02: return -ENOMEM; } -/* - * Emulate the VMXON instruction. - * Currently, we just remember that VMX is active, and do not save or even - * inspect the argument to VMXON (the so-called "VMXON pointer") because we - * do not currently need to store anything in that guest-allocated memory - * region. Consequently, VMCLEAR and VMPTRLD also do not verify that the their - * argument is different from the VMXON pointer (which the spec says they do). - */ +/* Emulate the VMXON instruction. */ static int handle_vmon(struct kvm_vcpu *vcpu) { int ret; -- cgit v1.2.3 From ae232ea460888dc5a8b37e840c553b02521fbf18 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Thu, 2 Sep 2021 12:11:00 +0900 Subject: KVM: do not shrink halt_poll_ns below grow_start grow_halt_poll_ns() ignores values between 0 and halt_poll_ns_grow_start (10000 by default). However, when we shrink halt_poll_ns we may fall way below halt_poll_ns_grow_start and endup with halt_poll_ns values that don't make a lot of sense: like 1 or 9, or 19. VCPU1 trace (halt_poll_ns_shrink equals 2): VCPU1 grow 10000 VCPU1 shrink 5000 VCPU1 shrink 2500 VCPU1 shrink 1250 VCPU1 shrink 625 VCPU1 shrink 312 VCPU1 shrink 156 VCPU1 shrink 78 VCPU1 shrink 39 VCPU1 shrink 19 VCPU1 shrink 9 VCPU1 shrink 4 Mirror what grow_halt_poll_ns() does and set halt_poll_ns to 0 as soon as new shrink-ed halt_poll_ns value falls below halt_poll_ns_grow_start. Signed-off-by: Sergey Senozhatsky Signed-off-by: Paolo Bonzini Message-Id: <20210902031100.252080-1-senozhatsky@chromium.org> Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 439d3b4cd1a9..8495a01d1e41 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -3134,15 +3134,19 @@ out: static void shrink_halt_poll_ns(struct kvm_vcpu *vcpu) { - unsigned int old, val, shrink; + unsigned int old, val, shrink, grow_start; old = val = vcpu->halt_poll_ns; shrink = READ_ONCE(halt_poll_ns_shrink); + grow_start = READ_ONCE(halt_poll_ns_grow_start); if (shrink == 0) val = 0; else val /= shrink; + if (val < grow_start) + val = 0; + vcpu->halt_poll_ns = val; trace_kvm_halt_poll_ns_shrink(vcpu->vcpu_id, val, old); } -- cgit v1.2.3 From bb18a677746543e7f5eeb478129c92cedb0f9658 Mon Sep 17 00:00:00 2001 From: Peter Gonda Date: Wed, 15 Sep 2021 10:17:55 -0700 Subject: KVM: SEV: Acquire vcpu mutex when updating VMSA The update-VMSA ioctl touches data stored in struct kvm_vcpu, and therefore should not be performed concurrently with any VCPU ioctl that might cause KVM or the processor to use the same data. Adds vcpu mutex guard to the VMSA updating code. Refactors out __sev_launch_update_vmsa() function to deal with per vCPU parts of sev_launch_update_vmsa(). Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest") Signed-off-by: Peter Gonda Cc: Marc Orr Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Brijesh Singh Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <20210915171755.3773766-1-pgonda@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 51 ++++++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 22 deletions(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 75e0b21ad07c..61c4bf4b3a0a 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -595,43 +595,50 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm) return 0; } -static int sev_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp) +static int __sev_launch_update_vmsa(struct kvm *kvm, struct kvm_vcpu *vcpu, + int *error) { - struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info; struct sev_data_launch_update_vmsa vmsa; + struct vcpu_svm *svm = to_svm(vcpu); + int ret; + + /* Perform some pre-encryption checks against the VMSA */ + ret = sev_es_sync_vmsa(svm); + if (ret) + return ret; + + /* + * The LAUNCH_UPDATE_VMSA command will perform in-place encryption of + * the VMSA memory content (i.e it will write the same memory region + * with the guest's key), so invalidate it first. + */ + clflush_cache_range(svm->vmsa, PAGE_SIZE); + + vmsa.reserved = 0; + vmsa.handle = to_kvm_svm(kvm)->sev_info.handle; + vmsa.address = __sme_pa(svm->vmsa); + vmsa.len = PAGE_SIZE; + return sev_issue_cmd(kvm, SEV_CMD_LAUNCH_UPDATE_VMSA, &vmsa, error); +} + +static int sev_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp) +{ struct kvm_vcpu *vcpu; int i, ret; if (!sev_es_guest(kvm)) return -ENOTTY; - vmsa.reserved = 0; - kvm_for_each_vcpu(i, vcpu, kvm) { - struct vcpu_svm *svm = to_svm(vcpu); - - /* Perform some pre-encryption checks against the VMSA */ - ret = sev_es_sync_vmsa(svm); + ret = mutex_lock_killable(&vcpu->mutex); if (ret) return ret; - /* - * The LAUNCH_UPDATE_VMSA command will perform in-place - * encryption of the VMSA memory content (i.e it will write - * the same memory region with the guest's key), so invalidate - * it first. - */ - clflush_cache_range(svm->vmsa, PAGE_SIZE); + ret = __sev_launch_update_vmsa(kvm, vcpu, &argp->error); - vmsa.handle = sev->handle; - vmsa.address = __sme_pa(svm->vmsa); - vmsa.len = PAGE_SIZE; - ret = sev_issue_cmd(kvm, SEV_CMD_LAUNCH_UPDATE_VMSA, &vmsa, - &argp->error); + mutex_unlock(&vcpu->mutex); if (ret) return ret; - - svm->vcpu.arch.guest_state_protected = true; } return 0; -- cgit v1.2.3 From f1815e0aa770f2127c5df31eb5c2f0e37b60fa77 Mon Sep 17 00:00:00 2001 From: Mingwei Zhang Date: Sun, 12 Sep 2021 18:18:15 +0000 Subject: KVM: SVM: fix missing sev_decommission in sev_receive_start DECOMMISSION the current SEV context if binding an ASID fails after RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest context and thus needs to be paired with DECOMMISSION: The RECEIVE_START command is the only command other than the LAUNCH_START command that generates a new guest context and guest handle. The missing DECOMMISSION can result in subsequent SEV launch failures, as the firmware leaks memory and might not able to allocate more SEV guest contexts in the future. Note, LAUNCH_START suffered the same bug, but was previously fixed by commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID binding fails"). Cc: Alper Gun Cc: Borislav Petkov Cc: Brijesh Singh Cc: David Rienjes Cc: Marc Orr Cc: John Allen Cc: Peter Gonda Cc: Sean Christopherson Cc: Tom Lendacky Cc: Vipin Sharma Cc: stable@vger.kernel.org Reviewed-by: Marc Orr Acked-by: Brijesh Singh Fixes: af43cbbf954b ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command") Signed-off-by: Mingwei Zhang Reviewed-by: Sean Christopherson Message-Id: <20210912181815.3899316-1-mizhang@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 61c4bf4b3a0a..4d68a37a8a24 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -1404,8 +1404,10 @@ static int sev_receive_start(struct kvm *kvm, struct kvm_sev_cmd *argp) /* Bind ASID to this guest */ ret = sev_bind_asid(kvm, start.handle, error); - if (ret) + if (ret) { + sev_decommission(start.handle); goto e_free_session; + } params.handle = start.handle; if (copy_to_user((void __user *)(uintptr_t)argp->data, -- cgit v1.2.3 From 50c038018d6be20361e8a2890262746a4ac5b11f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 14 Sep 2021 14:09:50 -0700 Subject: KVM: SEV: Pin guest memory for write for RECEIVE_UPDATE_DATA Require the target guest page to be writable when pinning memory for RECEIVE_UPDATE_DATA. Per the SEV API, the PSP writes to guest memory: The result is then encrypted with GCTX.VEK and written to the memory pointed to by GUEST_PADDR field. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda Cc: Marc Orr Cc: Tom Lendacky Cc: Brijesh Singh Signed-off-by: Sean Christopherson Message-Id: <20210914210951.2994260-2-seanjc@google.com> Reviewed-by: Brijesh Singh Reviewed-by: Peter Gonda Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 4d68a37a8a24..002d9885a3f4 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -1473,7 +1473,7 @@ static int sev_receive_update_data(struct kvm *kvm, struct kvm_sev_cmd *argp) /* Pin guest memory */ guest_page = sev_pin_memory(kvm, params.guest_uaddr & PAGE_MASK, - PAGE_SIZE, &n, 0); + PAGE_SIZE, &n, 1); if (IS_ERR(guest_page)) { ret = PTR_ERR(guest_page); goto e_free_trans; -- cgit v1.2.3 From e9337c843c4b4eaa4afb752a7272ef3d04c46381 Mon Sep 17 00:00:00 2001 From: Hou Wenlong Date: Wed, 18 Aug 2021 11:36:31 +0800 Subject: kvm: fix wrong exception emulation in check_rdtsc According to Intel's SDM Vol2 and AMD's APM Vol3, when CR4.TSD is set, use rdtsc/rdtscp instruction above privilege level 0 should trigger a #GP. Fixes: d7eb82030699e ("KVM: SVM: Add intercept checks for remaining group7 instructions") Signed-off-by: Hou Wenlong Message-Id: <1297c0dd3f1bb47a6d089f850b629c7aa0247040.1629257115.git.houwenlong93@linux.alibaba.com> Reviewed-by: Sean Christopherson Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/emulate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 2837110e66ed..c589ac832265 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -4206,7 +4206,7 @@ static int check_rdtsc(struct x86_emulate_ctxt *ctxt) u64 cr4 = ctxt->ops->get_cr(ctxt, 4); if (cr4 & X86_CR4_TSD && ctxt->ops->cpl(ctxt)) - return emulate_ud(ctxt); + return emulate_gp(ctxt, 0); return X86EMUL_CONTINUE; } -- cgit v1.2.3 From 4eeef2424153e79910d65248b5e1abf137d050e9 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 10 Sep 2021 11:32:19 -0700 Subject: KVM: x86: Query vcpu->vcpu_idx directly and drop its accessor Read vcpu->vcpu_idx directly instead of bouncing through the one-line wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a remnant of the original implementation and serves no purpose; remove it before it gains more users. Back when kvm_vcpu_get_idx() was added by commit 497d72d80a78 ("KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation was more than just a simple wrapper as vcpu->vcpu_idx did not exist and retrieving the index meant walking over the vCPU array to find the given vCPU. When vcpu_idx was introduced by commit 8750e72a79dd ("KVM: remember position in kvm->vcpus array"), the helper was left behind, likely to avoid extra thrash (but even then there were only two users, the original arm usage having been removed at some point in the past). No functional change intended. Suggested-by: Vitaly Kuznetsov Signed-off-by: Sean Christopherson Reviewed-by: Maxim Levitsky Reviewed-by: Vitaly Kuznetsov Message-Id: <20210910183220.2397812-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/s390/kvm/interrupt.c | 4 ++-- arch/s390/kvm/kvm-s390.c | 2 +- arch/s390/kvm/kvm-s390.h | 2 +- arch/x86/kvm/hyperv.c | 7 +++---- arch/x86/kvm/hyperv.h | 2 +- include/linux/kvm_host.h | 5 ----- 6 files changed, 8 insertions(+), 14 deletions(-) diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 16256e17a544..10722455fd02 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -419,13 +419,13 @@ static unsigned long deliverable_irqs(struct kvm_vcpu *vcpu) static void __set_cpu_idle(struct kvm_vcpu *vcpu) { kvm_s390_set_cpuflags(vcpu, CPUSTAT_WAIT); - set_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask); + set_bit(vcpu->vcpu_idx, vcpu->kvm->arch.idle_mask); } static void __unset_cpu_idle(struct kvm_vcpu *vcpu) { kvm_s390_clear_cpuflags(vcpu, CPUSTAT_WAIT); - clear_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask); + clear_bit(vcpu->vcpu_idx, vcpu->kvm->arch.idle_mask); } static void __reset_intercept_indicators(struct kvm_vcpu *vcpu) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 752a0ffab9bf..6a6dd5e1daf6 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -4066,7 +4066,7 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu) kvm_s390_patch_guest_per_regs(vcpu); } - clear_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.gisa_int.kicked_mask); + clear_bit(vcpu->vcpu_idx, vcpu->kvm->arch.gisa_int.kicked_mask); vcpu->arch.sie_block->icptcode = 0; cpuflags = atomic_read(&vcpu->arch.sie_block->cpuflags); diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index ecd741ee3276..52bc8fbaa60a 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -79,7 +79,7 @@ static inline int is_vcpu_stopped(struct kvm_vcpu *vcpu) static inline int is_vcpu_idle(struct kvm_vcpu *vcpu) { - return test_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask); + return test_bit(vcpu->vcpu_idx, vcpu->kvm->arch.idle_mask); } static inline int kvm_is_ucontrol(struct kvm *kvm) diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c index 232a86a6faaf..d5124b520f76 100644 --- a/arch/x86/kvm/hyperv.c +++ b/arch/x86/kvm/hyperv.c @@ -939,7 +939,7 @@ static int kvm_hv_vcpu_init(struct kvm_vcpu *vcpu) for (i = 0; i < ARRAY_SIZE(hv_vcpu->stimer); i++) stimer_init(&hv_vcpu->stimer[i], i); - hv_vcpu->vp_index = kvm_vcpu_get_idx(vcpu); + hv_vcpu->vp_index = vcpu->vcpu_idx; return 0; } @@ -1444,7 +1444,6 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host) switch (msr) { case HV_X64_MSR_VP_INDEX: { struct kvm_hv *hv = to_kvm_hv(vcpu->kvm); - int vcpu_idx = kvm_vcpu_get_idx(vcpu); u32 new_vp_index = (u32)data; if (!host || new_vp_index >= KVM_MAX_VCPUS) @@ -1459,9 +1458,9 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host) * VP index is changing, adjust num_mismatched_vp_indexes if * it now matches or no longer matches vcpu_idx. */ - if (hv_vcpu->vp_index == vcpu_idx) + if (hv_vcpu->vp_index == vcpu->vcpu_idx) atomic_inc(&hv->num_mismatched_vp_indexes); - else if (new_vp_index == vcpu_idx) + else if (new_vp_index == vcpu->vcpu_idx) atomic_dec(&hv->num_mismatched_vp_indexes); hv_vcpu->vp_index = new_vp_index; diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h index 730da8537d05..ed1c4e546d04 100644 --- a/arch/x86/kvm/hyperv.h +++ b/arch/x86/kvm/hyperv.h @@ -83,7 +83,7 @@ static inline u32 kvm_hv_get_vpindex(struct kvm_vcpu *vcpu) { struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu); - return hv_vcpu ? hv_vcpu->vp_index : kvm_vcpu_get_idx(vcpu); + return hv_vcpu ? hv_vcpu->vp_index : vcpu->vcpu_idx; } int kvm_hv_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 041ca7f15ea4..000ea73dd324 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -721,11 +721,6 @@ static inline struct kvm_vcpu *kvm_get_vcpu_by_id(struct kvm *kvm, int id) return NULL; } -static inline int kvm_vcpu_get_idx(struct kvm_vcpu *vcpu) -{ - return vcpu->vcpu_idx; -} - #define kvm_for_each_memslot(memslot, slots) \ for (memslot = &slots->memslots[0]; \ memslot < slots->memslots + slots->used_slots; memslot++) \ -- cgit v1.2.3 From 94c245a245ff6552a320257f97d5171d03f7ee3a Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 10 Sep 2021 11:32:20 -0700 Subject: KVM: x86: Identify vCPU0 by its vcpu_idx instead of its vCPUs array entry Use vcpu_idx to identify vCPU0 when updating HyperV's TSC page, which is shared by all vCPUs and "owned" by vCPU0 (because vCPU0 is the only vCPU that's guaranteed to exist). Using kvm_get_vcpu() to find vCPU works, but it's a rather odd and suboptimal method to check the index of a given vCPU. No functional change intended. Signed-off-by: Sean Christopherson Reviewed-by: Jim Mattson Reviewed-by: Maxim Levitsky Reviewed-by: Vitaly Kuznetsov Message-Id: <20210910183220.2397812-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42c5c7a195ae..11017c94f0aa 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2969,7 +2969,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) offsetof(struct compat_vcpu_info, time)); if (vcpu->xen.vcpu_time_info_set) kvm_setup_pvclock_page(v, &vcpu->xen.vcpu_time_info_cache, 0); - if (v == kvm_get_vcpu(v->kvm, 0)) + if (!v->vcpu_idx) kvm_hv_setup_tsc_page(v->kvm, &vcpu->hv_clock); return 0; } -- cgit v1.2.3 From 24a996ade34d00deef5dee2c33aacd8fda91ec31 Mon Sep 17 00:00:00 2001 From: Chenyi Qiang Date: Tue, 14 Sep 2021 17:50:41 +0800 Subject: KVM: nVMX: Fix nested bus lock VM exit Nested bus lock VM exits are not supported yet. If L2 triggers bus lock VM exit, it will be directed to L1 VMM, which would cause unexpected behavior. Therefore, handle L2's bus lock VM exits in L0 directly. Fixes: fe6b6bc802b4 ("KVM: VMX: Enable bus lock VM exit") Signed-off-by: Chenyi Qiang Reviewed-by: Sean Christopherson Reviewed-by: Xiaoyao Li Message-Id: <20210914095041.29764-1-chenyi.qiang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/nested.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 35cd938afa1d..bc9c9cc228ea 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -5896,6 +5896,12 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu, case EXIT_REASON_VMFUNC: /* VM functions are emulated through L2->L0 vmexits. */ return true; + case EXIT_REASON_BUS_LOCK: + /* + * At present, bus lock VM exit is never exposed to L1. + * Handle L2's bus locks in L0 directly. + */ + return true; default: break; } -- cgit v1.2.3 From f43c887cb7cb5b66c4167d40a4209027f5fdb5ce Mon Sep 17 00:00:00 2001 From: Peter Gonda Date: Tue, 21 Sep 2021 08:03:44 -0700 Subject: KVM: SEV: Update svm_vm_copy_asid_from for SEV-ES For mirroring SEV-ES the mirror VM will need more then just the ASID. The FD and the handle are required to all the mirror to call psp commands. The mirror VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to setup its vCPUs' VMSAs for SEV-ES. Signed-off-by: Peter Gonda Cc: Marc Orr Cc: Nathan Tempelman Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Steve Rutherford Cc: Brijesh Singh Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21) Message-Id: <20210921150345.2221634-2-pgonda@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 002d9885a3f4..5ec10ed85862 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -1724,8 +1724,7 @@ int svm_vm_copy_asid_from(struct kvm *kvm, unsigned int source_fd) { struct file *source_kvm_file; struct kvm *source_kvm; - struct kvm_sev_info *mirror_sev; - unsigned int asid; + struct kvm_sev_info source_sev, *mirror_sev; int ret; source_kvm_file = fget(source_fd); @@ -1748,7 +1747,8 @@ int svm_vm_copy_asid_from(struct kvm *kvm, unsigned int source_fd) goto e_source_unlock; } - asid = to_kvm_svm(source_kvm)->sev_info.asid; + memcpy(&source_sev, &to_kvm_svm(source_kvm)->sev_info, + sizeof(source_sev)); /* * The mirror kvm holds an enc_context_owner ref so its asid can't @@ -1768,8 +1768,16 @@ int svm_vm_copy_asid_from(struct kvm *kvm, unsigned int source_fd) /* Set enc_context_owner and copy its encryption context over */ mirror_sev = &to_kvm_svm(kvm)->sev_info; mirror_sev->enc_context_owner = source_kvm; - mirror_sev->asid = asid; mirror_sev->active = true; + mirror_sev->asid = source_sev.asid; + mirror_sev->fd = source_sev.fd; + mirror_sev->es_active = source_sev.es_active; + mirror_sev->handle = source_sev.handle; + /* + * Do not copy ap_jump_table. Since the mirror does not share the same + * KVM contexts as the original, and they may have different + * memory-views. + */ mutex_unlock(&kvm->lock); return 0; -- cgit v1.2.3 From 5b92b6ca92b65bef811048c481e4446f4828500a Mon Sep 17 00:00:00 2001 From: Peter Gonda Date: Tue, 21 Sep 2021 08:03:45 -0700 Subject: KVM: SEV: Allow some commands for mirror VM A mirrored SEV-ES VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to setup its vCPUs and have them measured, and their VMSAs encrypted. Without this change, it is impossible to have mirror VMs as part of SEV-ES VMs. Also allow the guest status check and debugging commands since they do not change any guest state. Signed-off-by: Peter Gonda Cc: Marc Orr Cc: Nathan Tempelman Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Steve Rutherford Cc: Brijesh Singh Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21) Message-Id: <20210921150345.2221634-3-pgonda@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 5ec10ed85862..c36b5fe4c27c 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -1510,6 +1510,20 @@ static int sev_receive_finish(struct kvm *kvm, struct kvm_sev_cmd *argp) return sev_issue_cmd(kvm, SEV_CMD_RECEIVE_FINISH, &data, &argp->error); } +static bool cmd_allowed_from_miror(u32 cmd_id) +{ + /* + * Allow mirrors VM to call KVM_SEV_LAUNCH_UPDATE_VMSA to enable SEV-ES + * active mirror VMs. Also allow the debugging and status commands. + */ + if (cmd_id == KVM_SEV_LAUNCH_UPDATE_VMSA || + cmd_id == KVM_SEV_GUEST_STATUS || cmd_id == KVM_SEV_DBG_DECRYPT || + cmd_id == KVM_SEV_DBG_ENCRYPT) + return true; + + return false; +} + int svm_mem_enc_op(struct kvm *kvm, void __user *argp) { struct kvm_sev_cmd sev_cmd; @@ -1526,8 +1540,9 @@ int svm_mem_enc_op(struct kvm *kvm, void __user *argp) mutex_lock(&kvm->lock); - /* enc_context_owner handles all memory enc operations */ - if (is_mirroring_enc_context(kvm)) { + /* Only the enc_context_owner handles some memory enc operations. */ + if (is_mirroring_enc_context(kvm) && + !cmd_allowed_from_miror(sev_cmd.id)) { r = -EINVAL; goto out; } -- cgit v1.2.3 From a1e638da1ba4078caa0374507cf0d9ec140a255f Mon Sep 17 00:00:00 2001 From: David Matlack Date: Fri, 17 Sep 2021 17:36:55 +0000 Subject: KVM: selftests: Change backing_src flag to -s in demand_paging_test Every other KVM selftest uses -s for the backing_src, so switch demand_paging_test to match. Reviewed-by: Ben Gardon Reviewed-by: Andrew Jones Signed-off-by: David Matlack Message-Id: <20210917173657.44011-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/demand_paging_test.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/demand_paging_test.c b/tools/testing/selftests/kvm/demand_paging_test.c index 10edae425ab3..71e18e9a3c13 100644 --- a/tools/testing/selftests/kvm/demand_paging_test.c +++ b/tools/testing/selftests/kvm/demand_paging_test.c @@ -416,7 +416,7 @@ static void help(char *name) { puts(""); printf("usage: %s [-h] [-m vm_mode] [-u uffd_mode] [-d uffd_delay_usec]\n" - " [-b memory] [-t type] [-v vcpus] [-o]\n", name); + " [-b memory] [-s type] [-v vcpus] [-o]\n", name); guest_modes_help(); printf(" -u: use userfaultfd to handle vCPU page faults. Mode is a\n" " UFFD registration mode: 'MISSING' or 'MINOR'.\n"); @@ -426,7 +426,7 @@ static void help(char *name) printf(" -b: specify the size of the memory region which should be\n" " demand paged by each vCPU. e.g. 10M or 3G.\n" " Default: 1G\n"); - printf(" -t: The type of backing memory to use. Default: anonymous\n"); + printf(" -s: The type of backing memory to use. Default: anonymous\n"); backing_src_help(); printf(" -v: specify the number of vCPUs to run.\n"); printf(" -o: Overlap guest memory accesses instead of partitioning\n" @@ -446,7 +446,7 @@ int main(int argc, char *argv[]) guest_modes_append_default(); - while ((opt = getopt(argc, argv, "hm:u:d:b:t:v:o")) != -1) { + while ((opt = getopt(argc, argv, "hm:u:d:b:s:v:o")) != -1) { switch (opt) { case 'm': guest_modes_cmdline(optarg); @@ -465,7 +465,7 @@ int main(int argc, char *argv[]) case 'b': guest_percpu_mem_size = parse_size(optarg); break; - case 't': + case 's': p.src_type = parse_backing_src_type(optarg); break; case 'v': @@ -485,7 +485,7 @@ int main(int argc, char *argv[]) if (p.uffd_mode == UFFDIO_REGISTER_MODE_MINOR && !backing_src_is_shared(p.src_type)) { - TEST_FAIL("userfaultfd MINOR mode requires shared memory; pick a different -t"); + TEST_FAIL("userfaultfd MINOR mode requires shared memory; pick a different -s"); } for_each_guest_mode(run_test, &p); -- cgit v1.2.3 From 9f2fc5554a4093e80084389f760d0b06ec2ff782 Mon Sep 17 00:00:00 2001 From: David Matlack Date: Fri, 17 Sep 2021 17:36:56 +0000 Subject: KVM: selftests: Refactor help message for -s backing_src All selftests that support the backing_src option were printing their own description of the flag and then calling backing_src_help() to dump the list of available backing sources. Consolidate the flag printing in backing_src_help() to align indentation, reduce duplicated strings, and improve consistency across tests. Note: Passing "-s" to backing_src_help is unnecessary since every test uses the same flag. However I decided to keep it for code readability at the call sites. While here this opportunistically fixes the incorrectly interleaved printing -x help message and list of backing source types in dirty_log_perf_test. Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test") Reviewed-by: Ben Gardon Reviewed-by: Andrew Jones Signed-off-by: David Matlack Message-Id: <20210917173657.44011-3-dmatlack@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/access_tracking_perf_test.c | 6 ++---- tools/testing/selftests/kvm/demand_paging_test.c | 5 ++--- tools/testing/selftests/kvm/dirty_log_perf_test.c | 8 +++----- tools/testing/selftests/kvm/include/test_util.h | 4 +++- tools/testing/selftests/kvm/kvm_page_table_test.c | 7 ++----- tools/testing/selftests/kvm/lib/test_util.c | 17 +++++++++++++---- 6 files changed, 25 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/kvm/access_tracking_perf_test.c b/tools/testing/selftests/kvm/access_tracking_perf_test.c index 71e277c7c3f3..5d95113c7b7c 100644 --- a/tools/testing/selftests/kvm/access_tracking_perf_test.c +++ b/tools/testing/selftests/kvm/access_tracking_perf_test.c @@ -371,9 +371,7 @@ static void help(char *name) printf(" -v: specify the number of vCPUs to run.\n"); printf(" -o: Overlap guest memory accesses instead of partitioning\n" " them into a separate region of memory for each vCPU.\n"); - printf(" -s: specify the type of memory that should be used to\n" - " back the guest data region.\n\n"); - backing_src_help(); + backing_src_help("-s"); puts(""); exit(0); } @@ -381,7 +379,7 @@ static void help(char *name) int main(int argc, char *argv[]) { struct test_params params = { - .backing_src = VM_MEM_SRC_ANONYMOUS, + .backing_src = DEFAULT_VM_MEM_SRC, .vcpu_memory_bytes = DEFAULT_PER_VCPU_MEM_SIZE, .vcpus = 1, }; diff --git a/tools/testing/selftests/kvm/demand_paging_test.c b/tools/testing/selftests/kvm/demand_paging_test.c index 71e18e9a3c13..1510b21e6306 100644 --- a/tools/testing/selftests/kvm/demand_paging_test.c +++ b/tools/testing/selftests/kvm/demand_paging_test.c @@ -426,8 +426,7 @@ static void help(char *name) printf(" -b: specify the size of the memory region which should be\n" " demand paged by each vCPU. e.g. 10M or 3G.\n" " Default: 1G\n"); - printf(" -s: The type of backing memory to use. Default: anonymous\n"); - backing_src_help(); + backing_src_help("-s"); printf(" -v: specify the number of vCPUs to run.\n"); printf(" -o: Overlap guest memory accesses instead of partitioning\n" " them into a separate region of memory for each vCPU.\n"); @@ -439,7 +438,7 @@ int main(int argc, char *argv[]) { int max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS); struct test_params p = { - .src_type = VM_MEM_SRC_ANONYMOUS, + .src_type = DEFAULT_VM_MEM_SRC, .partition_vcpu_memory_access = true, }; int opt; diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c index 479868570d59..b076dfa3ae1b 100644 --- a/tools/testing/selftests/kvm/dirty_log_perf_test.c +++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c @@ -308,11 +308,9 @@ static void help(char *name) printf(" -v: specify the number of vCPUs to run.\n"); printf(" -o: Overlap guest memory accesses instead of partitioning\n" " them into a separate region of memory for each vCPU.\n"); - printf(" -s: specify the type of memory that should be used to\n" - " back the guest data region.\n\n"); + backing_src_help("-s"); printf(" -x: Split the memory region into this number of memslots.\n" - " (default: 1)"); - backing_src_help(); + " (default: 1)\n"); puts(""); exit(0); } @@ -324,7 +322,7 @@ int main(int argc, char *argv[]) .iterations = TEST_HOST_LOOP_N, .wr_fract = 1, .partition_vcpu_memory_access = true, - .backing_src = VM_MEM_SRC_ANONYMOUS, + .backing_src = DEFAULT_VM_MEM_SRC, .slots = 1, }; int opt; diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index d79be15dd3d2..4fa1db32c05e 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -90,6 +90,8 @@ enum vm_mem_backing_src_type { NUM_SRC_TYPES, }; +#define DEFAULT_VM_MEM_SRC VM_MEM_SRC_ANONYMOUS + struct vm_mem_backing_src_alias { const char *name; uint32_t flag; @@ -100,7 +102,7 @@ size_t get_trans_hugepagesz(void); size_t get_def_hugetlb_pagesz(void); const struct vm_mem_backing_src_alias *vm_mem_backing_src_alias(uint32_t i); size_t get_backing_src_pagesz(uint32_t i); -void backing_src_help(void); +void backing_src_help(const char *flag); enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name); /* diff --git a/tools/testing/selftests/kvm/kvm_page_table_test.c b/tools/testing/selftests/kvm/kvm_page_table_test.c index 0d04a7db7f24..36407cb0ec85 100644 --- a/tools/testing/selftests/kvm/kvm_page_table_test.c +++ b/tools/testing/selftests/kvm/kvm_page_table_test.c @@ -456,10 +456,7 @@ static void help(char *name) " (default: 1G)\n"); printf(" -v: specify the number of vCPUs to run\n" " (default: 1)\n"); - printf(" -s: specify the type of memory that should be used to\n" - " back the guest data region.\n" - " (default: anonymous)\n\n"); - backing_src_help(); + backing_src_help("-s"); puts(""); } @@ -468,7 +465,7 @@ int main(int argc, char *argv[]) int max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS); struct test_params p = { .test_mem_size = DEFAULT_TEST_MEM_SIZE, - .src_type = VM_MEM_SRC_ANONYMOUS, + .src_type = DEFAULT_VM_MEM_SRC, }; int opt; diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index af1031fed97f..e487f798e095 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -279,13 +279,22 @@ size_t get_backing_src_pagesz(uint32_t i) } } -void backing_src_help(void) +static void print_available_backing_src_types(const char *prefix) { int i; - printf("Available backing src types:\n"); + printf("%sAvailable backing src types:\n", prefix); + for (i = 0; i < NUM_SRC_TYPES; i++) - printf("\t%s\n", vm_mem_backing_src_alias(i)->name); + printf("%s %s\n", prefix, vm_mem_backing_src_alias(i)->name); +} + +void backing_src_help(const char *flag) +{ + printf(" %s: specify the type of memory that should be used to\n" + " back the guest data region. (default: %s)\n", + flag, vm_mem_backing_src_alias(DEFAULT_VM_MEM_SRC)->name); + print_available_backing_src_types(" "); } enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name) @@ -296,7 +305,7 @@ enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name) if (!strcmp(type_name, vm_mem_backing_src_alias(i)->name)) return i; - backing_src_help(); + print_available_backing_src_types(""); TEST_FAIL("Unknown backing src type: %s", type_name); return -1; } -- cgit v1.2.3 From 7c236b816ef16c2969a88ced658dab667e9dd4ee Mon Sep 17 00:00:00 2001 From: David Matlack Date: Fri, 17 Sep 2021 17:36:57 +0000 Subject: KVM: selftests: Create a separate dirty bitmap per slot The calculation to get the per-slot dirty bitmap was incorrect leading to a buffer overrun. Fix it by splitting out the dirty bitmap into a separate bitmap per slot. Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test") Signed-off-by: David Matlack Reviewed-by: Andrew Jones Message-Id: <20210917173657.44011-4-dmatlack@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/dirty_log_perf_test.c | 54 ++++++++++++++++------- 1 file changed, 39 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c index b076dfa3ae1b..7ffab5bd5ce5 100644 --- a/tools/testing/selftests/kvm/dirty_log_perf_test.c +++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c @@ -118,42 +118,64 @@ static inline void disable_dirty_logging(struct kvm_vm *vm, int slots) toggle_dirty_logging(vm, slots, false); } -static void get_dirty_log(struct kvm_vm *vm, int slots, unsigned long *bitmap, - uint64_t nr_pages) +static void get_dirty_log(struct kvm_vm *vm, unsigned long *bitmaps[], int slots) { - uint64_t slot_pages = nr_pages / slots; int i; for (i = 0; i < slots; i++) { int slot = PERF_TEST_MEM_SLOT_INDEX + i; - unsigned long *slot_bitmap = bitmap + i * slot_pages; - kvm_vm_get_dirty_log(vm, slot, slot_bitmap); + kvm_vm_get_dirty_log(vm, slot, bitmaps[i]); } } -static void clear_dirty_log(struct kvm_vm *vm, int slots, unsigned long *bitmap, - uint64_t nr_pages) +static void clear_dirty_log(struct kvm_vm *vm, unsigned long *bitmaps[], + int slots, uint64_t pages_per_slot) { - uint64_t slot_pages = nr_pages / slots; int i; for (i = 0; i < slots; i++) { int slot = PERF_TEST_MEM_SLOT_INDEX + i; - unsigned long *slot_bitmap = bitmap + i * slot_pages; - kvm_vm_clear_dirty_log(vm, slot, slot_bitmap, 0, slot_pages); + kvm_vm_clear_dirty_log(vm, slot, bitmaps[i], 0, pages_per_slot); } } +static unsigned long **alloc_bitmaps(int slots, uint64_t pages_per_slot) +{ + unsigned long **bitmaps; + int i; + + bitmaps = malloc(slots * sizeof(bitmaps[0])); + TEST_ASSERT(bitmaps, "Failed to allocate bitmaps array."); + + for (i = 0; i < slots; i++) { + bitmaps[i] = bitmap_zalloc(pages_per_slot); + TEST_ASSERT(bitmaps[i], "Failed to allocate slot bitmap."); + } + + return bitmaps; +} + +static void free_bitmaps(unsigned long *bitmaps[], int slots) +{ + int i; + + for (i = 0; i < slots; i++) + free(bitmaps[i]); + + free(bitmaps); +} + static void run_test(enum vm_guest_mode mode, void *arg) { struct test_params *p = arg; pthread_t *vcpu_threads; struct kvm_vm *vm; - unsigned long *bmap; + unsigned long **bitmaps; uint64_t guest_num_pages; uint64_t host_num_pages; + uint64_t pages_per_slot; int vcpu_id; struct timespec start; struct timespec ts_diff; @@ -171,7 +193,9 @@ static void run_test(enum vm_guest_mode mode, void *arg) guest_num_pages = (nr_vcpus * guest_percpu_mem_size) >> vm_get_page_shift(vm); guest_num_pages = vm_adjust_num_guest_pages(mode, guest_num_pages); host_num_pages = vm_num_host_pages(mode, guest_num_pages); - bmap = bitmap_zalloc(host_num_pages); + pages_per_slot = host_num_pages / p->slots; + + bitmaps = alloc_bitmaps(p->slots, pages_per_slot); if (dirty_log_manual_caps) { cap.cap = KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2; @@ -239,7 +263,7 @@ static void run_test(enum vm_guest_mode mode, void *arg) iteration, ts_diff.tv_sec, ts_diff.tv_nsec); clock_gettime(CLOCK_MONOTONIC, &start); - get_dirty_log(vm, p->slots, bmap, host_num_pages); + get_dirty_log(vm, bitmaps, p->slots); ts_diff = timespec_elapsed(start); get_dirty_log_total = timespec_add(get_dirty_log_total, ts_diff); @@ -248,7 +272,7 @@ static void run_test(enum vm_guest_mode mode, void *arg) if (dirty_log_manual_caps) { clock_gettime(CLOCK_MONOTONIC, &start); - clear_dirty_log(vm, p->slots, bmap, host_num_pages); + clear_dirty_log(vm, bitmaps, p->slots, pages_per_slot); ts_diff = timespec_elapsed(start); clear_dirty_log_total = timespec_add(clear_dirty_log_total, ts_diff); @@ -281,7 +305,7 @@ static void run_test(enum vm_guest_mode mode, void *arg) clear_dirty_log_total.tv_nsec, avg.tv_sec, avg.tv_nsec); } - free(bmap); + free_bitmaps(bitmaps, p->slots); free(vcpu_threads); perf_test_destroy_vm(vm); } -- cgit v1.2.3 From 2f9b68f57c6278c322793a06063181deded0ad69 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Fri, 27 Aug 2021 11:25:14 +0200 Subject: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs). Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Fixes: 9a2ae9f6b6bb ("KVM: x86: Zero the IOAPIC scan request dest vCPUs bitmap") Reported-by: Dr. David Alan Gilbert Signed-off-by: Vitaly Kuznetsov Reviewed-by: Maxim Levitsky Reviewed-by: Sean Christopherson Message-Id: <20210827092516.1027264-7-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/ioapic.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c index ff005fe738a4..8c065da73f8e 100644 --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -319,8 +319,8 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) unsigned index; bool mask_before, mask_after; union kvm_ioapic_redirect_entry *e; - unsigned long vcpu_bitmap; int old_remote_irr, old_delivery_status, old_dest_id, old_dest_mode; + DECLARE_BITMAP(vcpu_bitmap, KVM_MAX_VCPUS); switch (ioapic->ioregsel) { case IOAPIC_REG_VERSION: @@ -384,9 +384,9 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) irq.shorthand = APIC_DEST_NOSHORT; irq.dest_id = e->fields.dest_id; irq.msi_redir_hint = false; - bitmap_zero(&vcpu_bitmap, 16); + bitmap_zero(vcpu_bitmap, KVM_MAX_VCPUS); kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq, - &vcpu_bitmap); + vcpu_bitmap); if (old_dest_mode != e->fields.dest_mode || old_dest_id != e->fields.dest_id) { /* @@ -399,10 +399,10 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) kvm_lapic_irq_dest_mode( !!e->fields.dest_mode); kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq, - &vcpu_bitmap); + vcpu_bitmap); } kvm_make_scan_ioapic_request_mask(ioapic->kvm, - &vcpu_bitmap); + vcpu_bitmap); } else { kvm_make_scan_ioapic_request(ioapic->kvm); } -- cgit v1.2.3 From 85b640450ddcfa09cf72771b69a9c3daf0ddc772 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 27 Aug 2021 11:25:09 +0200 Subject: KVM: Clean up benign vcpu->cpu data races when kicking vCPUs Fix a benign data race reported by syzbot+KCSAN[*] by ensuring vcpu->cpu is read exactly once, and by ensuring the vCPU is booted from guest mode if kvm_arch_vcpu_should_kick() returns true. Fix a similar race in kvm_make_vcpus_request_mask() by ensuring the vCPU is interrupted if kvm_request_needs_ipi() returns true. Reading vcpu->cpu before vcpu->mode (via kvm_arch_vcpu_should_kick() or kvm_request_needs_ipi()) means the target vCPU could get migrated (change vcpu->cpu) and enter !OUTSIDE_GUEST_MODE between reading vcpu->cpud and reading vcpu->mode. If that happens, the kick/IPI will be sent to the old pCPU, not the new pCPU that is now running the vCPU or reading SPTEs. Although failing to kick the vCPU is not exactly ideal, practically speaking it cannot cause a functional issue unless there is also a bug in the caller, and any such bug would exist regardless of kvm_vcpu_kick()'s behavior. The purpose of sending an IPI is purely to get a vCPU into the host (or out of reading SPTEs) so that the vCPU can recognize a change in state, e.g. a KVM_REQ_* request. If vCPU's handling of the state change is required for correctness, KVM must ensure either the vCPU sees the change before entering the guest, or that the sender sees the vCPU as running in guest mode. All architectures handle this by (a) sending the request before calling kvm_vcpu_kick() and (b) checking for requests _after_ setting vcpu->mode. x86's READING_SHADOW_PAGE_TABLES has similar requirements; KVM needs to ensure it kicks and waits for vCPUs that started reading SPTEs _before_ MMU changes were finalized, but any vCPU that starts reading after MMU changes were finalized will see the new state and can continue on uninterrupted. For uses of kvm_vcpu_kick() that are not paired with a KVM_REQ_*, e.g. x86's kvm_arch_sync_dirty_log(), the order of the kick must not be relied upon for functional correctness, e.g. in the dirty log case, userspace cannot assume it has a 100% complete log if vCPUs are still running. All that said, eliminate the benign race since the cost of doing so is an "extra" atomic cmpxchg() in the case where the target vCPU is loaded by the current pCPU or is not loaded at all. I.e. the kick will be skipped due to kvm_vcpu_exiting_guest_mode() seeing a compatible vcpu->mode as opposed to the kick being skipped because of the cpu checks. Keep the "cpu != me" checks even though they appear useless/impossible at first glance. x86 processes guest IPI writes in a fast path that runs in IN_GUEST_MODE, i.e. can call kvm_vcpu_kick() from IN_GUEST_MODE. And calling kvm_vm_bugged()->kvm_make_vcpus_request_mask() from IN_GUEST or READING_SHADOW_PAGE_TABLES is perfectly reasonable. Note, a race with the cpu_online() check in kvm_vcpu_kick() likely persists, e.g. the vCPU could exit guest mode and get offlined between the cpu_online() check and the sending of smp_send_reschedule(). But, the online check appears to exist only to avoid a WARN in x86's native_smp_send_reschedule() that fires if the target CPU is not online. The reschedule WARN exists because CPU offlining takes the CPU out of the scheduling pool, i.e. the WARN is intended to detect the case where the kernel attempts to schedule a task on an offline CPU. The actual sending of the IPI is a non-issue as at worst it will simpy be dropped on the floor. In other words, KVM's usurping of the reschedule IPI could theoretically trigger a WARN if the stars align, but there will be no loss of functionality. [*] https://syzkaller.appspot.com/bug?extid=cd4154e502f43f10808a Cc: Venkatesh Srinivas Cc: Vitaly Kuznetsov Fixes: 97222cc83163 ("KVM: Emulate local APIC in kernel") Signed-off-by: Sean Christopherson Signed-off-by: Vitaly Kuznetsov Message-Id: <20210827092516.1027264-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 8495a01d1e41..490c8cb8cc8d 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -263,14 +263,26 @@ bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req, continue; kvm_make_request(req, vcpu); - cpu = vcpu->cpu; if (!(req & KVM_REQUEST_NO_WAKEUP) && kvm_vcpu_wake_up(vcpu)) continue; - if (tmp != NULL && cpu != -1 && cpu != me && - kvm_request_needs_ipi(vcpu, req)) - __cpumask_set_cpu(cpu, tmp); + /* + * Note, the vCPU could get migrated to a different pCPU at any + * point after kvm_request_needs_ipi(), which could result in + * sending an IPI to the previous pCPU. But, that's ok because + * the purpose of the IPI is to ensure the vCPU returns to + * OUTSIDE_GUEST_MODE, which is satisfied if the vCPU migrates. + * Entering READING_SHADOW_PAGE_TABLES after this point is also + * ok, as the requirement is only that KVM wait for vCPUs that + * were reading SPTEs _before_ any changes were finalized. See + * kvm_vcpu_kick() for more details on handling requests. + */ + if (tmp != NULL && kvm_request_needs_ipi(vcpu, req)) { + cpu = READ_ONCE(vcpu->cpu); + if (cpu != -1 && cpu != me) + __cpumask_set_cpu(cpu, tmp); + } } called = kvm_kick_many_cpus(tmp, !!(req & KVM_REQUEST_WAIT)); @@ -3294,16 +3306,24 @@ EXPORT_SYMBOL_GPL(kvm_vcpu_wake_up); */ void kvm_vcpu_kick(struct kvm_vcpu *vcpu) { - int me; - int cpu = vcpu->cpu; + int me, cpu; if (kvm_vcpu_wake_up(vcpu)) return; + /* + * Note, the vCPU could get migrated to a different pCPU at any point + * after kvm_arch_vcpu_should_kick(), which could result in sending an + * IPI to the previous pCPU. But, that's ok because the purpose of the + * IPI is to force the vCPU to leave IN_GUEST_MODE, and migrating the + * vCPU also requires it to leave IN_GUEST_MODE. + */ me = get_cpu(); - if (cpu != me && (unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) - if (kvm_arch_vcpu_should_kick(vcpu)) + if (kvm_arch_vcpu_should_kick(vcpu)) { + cpu = READ_ONCE(vcpu->cpu); + if (cpu != me && (unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) smp_send_reschedule(cpu); + } put_cpu(); } EXPORT_SYMBOL_GPL(kvm_vcpu_kick); -- cgit v1.2.3 From 0bbc2ca8515f9cdf11df84ccb63dc7c44bc3d8f4 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 27 Aug 2021 11:25:10 +0200 Subject: KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs Check for a NULL cpumask_var_t when kicking multiple vCPUs via cpumask_available(), which performs a !NULL check if and only if cpumasks are configured to be allocated off-stack. This is a meaningless optimization, e.g. avoids a TEST+Jcc and TEST+CMOV on x86, but more importantly helps document that the NULL check is necessary even though all callers pass in a local variable. No functional change intended. Cc: Lai Jiangshan Signed-off-by: Sean Christopherson Signed-off-by: Vitaly Kuznetsov Message-Id: <20210827092516.1027264-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 490c8cb8cc8d..e95e7a9e4d53 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -235,9 +235,13 @@ static void ack_flush(void *_completed) { } -static inline bool kvm_kick_many_cpus(const struct cpumask *cpus, bool wait) +static inline bool kvm_kick_many_cpus(cpumask_var_t tmp, bool wait) { - if (unlikely(!cpus)) + const struct cpumask *cpus; + + if (likely(cpumask_available(tmp))) + cpus = tmp; + else cpus = cpu_online_mask; if (cpumask_empty(cpus)) @@ -267,6 +271,14 @@ bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req, if (!(req & KVM_REQUEST_NO_WAKEUP) && kvm_vcpu_wake_up(vcpu)) continue; + /* + * tmp can be "unavailable" if cpumasks are allocated off stack + * as allocation of the mask is deliberately not fatal and is + * handled by falling back to kicking all online CPUs. + */ + if (!cpumask_available(tmp)) + continue; + /* * Note, the vCPU could get migrated to a different pCPU at any * point after kvm_request_needs_ipi(), which could result in @@ -278,7 +290,7 @@ bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req, * were reading SPTEs _before_ any changes were finalized. See * kvm_vcpu_kick() for more details on handling requests. */ - if (tmp != NULL && kvm_request_needs_ipi(vcpu, req)) { + if (kvm_request_needs_ipi(vcpu, req)) { cpu = READ_ONCE(vcpu->cpu); if (cpu != -1 && cpu != me) __cpumask_set_cpu(cpu, tmp); -- cgit v1.2.3 From 8d68bad6d869fae8f4d50ab6423538dec7da72d1 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Tue, 7 Sep 2021 18:35:30 +0200 Subject: KVM: nVMX: Filter out all unsupported controls when eVMCS was activated Windows Server 2022 with Hyper-V role enabled failed to boot on KVM when enlightened VMCS is advertised. Debugging revealed there are two exposed secondary controls it is not happy with: SECONDARY_EXEC_ENABLE_VMFUNC and SECONDARY_EXEC_SHADOW_VMCS. These controls are known to be unsupported, as there are no corresponding fields in eVMCSv1 (see the comment above EVMCS1_UNSUPPORTED_2NDEXEC definition). Previously, commit 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") introduced the required filtering mechanism for VMX MSRs but for some reason put only known to be problematic (and not full EVMCS1_UNSUPPORTED_* lists) controls there. Note, Windows Server 2022 seems to have gained some sanity check for VMX MSRs: it doesn't even try to launch a guest when there's something it doesn't like, nested_evmcs_check_controls() mechanism can't catch the problem. Let's be bold this time and instead of playing whack-a-mole just filter out all unsupported controls from VMX MSRs. Fixes: 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") Signed-off-by: Vitaly Kuznetsov Message-Id: <20210907163530.110066-1-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/evmcs.c | 12 +++++++++--- arch/x86/kvm/vmx/vmx.c | 9 +++++---- 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c index 0dab1b7b529f..ba6f99f584ac 100644 --- a/arch/x86/kvm/vmx/evmcs.c +++ b/arch/x86/kvm/vmx/evmcs.c @@ -353,14 +353,20 @@ void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata) switch (msr_index) { case MSR_IA32_VMX_EXIT_CTLS: case MSR_IA32_VMX_TRUE_EXIT_CTLS: - ctl_high &= ~VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL; + ctl_high &= ~EVMCS1_UNSUPPORTED_VMEXIT_CTRL; break; case MSR_IA32_VMX_ENTRY_CTLS: case MSR_IA32_VMX_TRUE_ENTRY_CTLS: - ctl_high &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL; + ctl_high &= ~EVMCS1_UNSUPPORTED_VMENTRY_CTRL; break; case MSR_IA32_VMX_PROCBASED_CTLS2: - ctl_high &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; + ctl_high &= ~EVMCS1_UNSUPPORTED_2NDEXEC; + break; + case MSR_IA32_VMX_PINBASED_CTLS: + ctl_high &= ~EVMCS1_UNSUPPORTED_PINCTRL; + break; + case MSR_IA32_VMX_VMFUNC: + ctl_low &= ~EVMCS1_UNSUPPORTED_VMFUNC; break; } diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 0c2c0d5ae873..f7eb0ce0ddb5 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -1837,10 +1837,11 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) &msr_info->data)) return 1; /* - * Enlightened VMCS v1 doesn't have certain fields, but buggy - * Hyper-V versions are still trying to use corresponding - * features when they are exposed. Filter out the essential - * minimum. + * Enlightened VMCS v1 doesn't have certain VMCS fields but + * instead of just ignoring the features, different Hyper-V + * versions are either trying to use them and fail or do some + * sanity checking and refuse to boot. Filter all unsupported + * features out. */ if (!msr_info->host_initiated && vmx->nested.enlightened_vmcs_enabled) -- cgit v1.2.3 From e2e6e449d68ddf4ccb0bf72cc50fbc6c69fe7f63 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:49 +0300 Subject: KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit Otherwise guest entry code might see incorrect L1 state (e.g paging state). Fixes: 37be407b2ce8 ("KVM: nSVM: Fix L1 state corruption upon return from SMM") Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 05e8d4d27969..35cac2046f69 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4351,11 +4351,6 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) if (svm_allocate_nested(svm)) return 1; - vmcb12 = map.hva; - - nested_load_control_from_vmcb12(svm, &vmcb12->control); - - ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12); kvm_vcpu_unmap(vcpu, &map, true); /* @@ -4369,6 +4364,13 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) svm_copy_vmrun_state(&svm->vmcb01.ptr->save, map_save.hva + 0x400); + /* + * Enter the nested guest now + */ + vmcb12 = map.hva; + nested_load_control_from_vmcb12(svm, &vmcb12->control); + ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12); + kvm_vcpu_unmap(vcpu, &map_save, true); } } -- cgit v1.2.3 From 37687c403a641f251cb2ef2e7830b88aa0647ba9 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:50 +0300 Subject: KVM: x86: reset pdptrs_from_userspace when exiting smm When exiting SMM, pdpts are loaded again from the guest memory. This fixes a theoretical bug, when exit from SMM triggers entry to the nested guest which re-uses some of the migration code which uses this flag as a workaround for a legacy userspace. Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 11017c94f0aa..ba70e8f11f2c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7658,6 +7658,13 @@ static void kvm_smm_changed(struct kvm_vcpu *vcpu, bool entering_smm) /* Process a latched INIT or SMI, if any. */ kvm_make_request(KVM_REQ_EVENT, vcpu); + + /* + * Even if KVM_SET_SREGS2 loaded PDPTRs out of band, + * on SMM exit we still need to reload them from + * guest memory + */ + vcpu->arch.pdptrs_from_userspace = false; } kvm_mmu_reset_context(vcpu); -- cgit v1.2.3 From e85d3e7b495bb6c0b847a693f5f6d4bd429fae55 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:51 +0300 Subject: KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs, and MSR bitmap, with former not really needed for SMM as SMM exit code reloads them again from SMRAM'S CR3, and later happens to work since MSR bitmap isn't modified while in SMM. Still it is better to be consistient with VMX. Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/nested.c | 9 ++++++--- arch/x86/kvm/svm/svm.c | 2 +- arch/x86/kvm/svm/svm.h | 3 ++- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c index 2545d0c61985..b41a21cac544 100644 --- a/arch/x86/kvm/svm/nested.c +++ b/arch/x86/kvm/svm/nested.c @@ -579,7 +579,7 @@ static void nested_svm_copy_common_state(struct vmcb *from_vmcb, struct vmcb *to } int enter_svm_guest_mode(struct kvm_vcpu *vcpu, u64 vmcb12_gpa, - struct vmcb *vmcb12) + struct vmcb *vmcb12, bool from_vmrun) { struct vcpu_svm *svm = to_svm(vcpu); int ret; @@ -609,13 +609,16 @@ int enter_svm_guest_mode(struct kvm_vcpu *vcpu, u64 vmcb12_gpa, nested_vmcb02_prepare_save(svm, vmcb12); ret = nested_svm_load_cr3(&svm->vcpu, vmcb12->save.cr3, - nested_npt_enabled(svm), true); + nested_npt_enabled(svm), from_vmrun); if (ret) return ret; if (!npt_enabled) vcpu->arch.mmu->inject_page_fault = svm_inject_page_fault_nested; + if (!from_vmrun) + kvm_make_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu); + svm_set_gif(svm, true); return 0; @@ -681,7 +684,7 @@ int nested_svm_vmrun(struct kvm_vcpu *vcpu) svm->nested.nested_run_pending = 1; - if (enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12)) + if (enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, true)) goto out_exit_err; if (nested_svm_vmrun_msrpm(svm)) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 35cac2046f69..ffdde862a5f6 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4369,7 +4369,7 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) */ vmcb12 = map.hva; nested_load_control_from_vmcb12(svm, &vmcb12->control); - ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12); + ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, false); kvm_vcpu_unmap(vcpu, &map_save, true); } diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h index 524d943f3efc..128a54b1fbf1 100644 --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -459,7 +459,8 @@ static inline bool nested_exit_on_nmi(struct vcpu_svm *svm) return vmcb_is_intercept(&svm->nested.ctl, INTERCEPT_NMI); } -int enter_svm_guest_mode(struct kvm_vcpu *vcpu, u64 vmcb_gpa, struct vmcb *vmcb12); +int enter_svm_guest_mode(struct kvm_vcpu *vcpu, + u64 vmcb_gpa, struct vmcb *vmcb12, bool from_vmrun); void svm_leave_nested(struct vcpu_svm *svm); void svm_free_nested(struct vcpu_svm *svm); int svm_allocate_nested(struct vcpu_svm *svm); -- cgit v1.2.3 From 136a55c054ca03b44b74efe03f136d495dd84ec8 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Wed, 22 Sep 2021 10:28:43 -0400 Subject: KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm Use return statements instead of nested if, and fix error path to free all the maps that were allocated. Suggested-by: Sean Christopherson Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 135 +++++++++++++++++++++++++------------------------ 1 file changed, 69 insertions(+), 66 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index ffdde862a5f6..196bb3d22383 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4285,43 +4285,44 @@ static int svm_enter_smm(struct kvm_vcpu *vcpu, char *smstate) struct kvm_host_map map_save; int ret; - if (is_guest_mode(vcpu)) { - /* FED8h - SVM Guest */ - put_smstate(u64, smstate, 0x7ed8, 1); - /* FEE0h - SVM Guest VMCB Physical Address */ - put_smstate(u64, smstate, 0x7ee0, svm->nested.vmcb12_gpa); + if (!is_guest_mode(vcpu)) + return 0; - svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX]; - svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP]; - svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP]; + /* FED8h - SVM Guest */ + put_smstate(u64, smstate, 0x7ed8, 1); + /* FEE0h - SVM Guest VMCB Physical Address */ + put_smstate(u64, smstate, 0x7ee0, svm->nested.vmcb12_gpa); - ret = nested_svm_vmexit(svm); - if (ret) - return ret; + svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX]; + svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP]; + svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP]; - /* - * KVM uses VMCB01 to store L1 host state while L2 runs but - * VMCB01 is going to be used during SMM and thus the state will - * be lost. Temporary save non-VMLOAD/VMSAVE state to the host save - * area pointed to by MSR_VM_HSAVE_PA. APM guarantees that the - * format of the area is identical to guest save area offsetted - * by 0x400 (matches the offset of 'struct vmcb_save_area' - * within 'struct vmcb'). Note: HSAVE area may also be used by - * L1 hypervisor to save additional host context (e.g. KVM does - * that, see svm_prepare_guest_switch()) which must be - * preserved. - */ - if (kvm_vcpu_map(vcpu, gpa_to_gfn(svm->nested.hsave_msr), - &map_save) == -EINVAL) - return 1; + ret = nested_svm_vmexit(svm); + if (ret) + return ret; + + /* + * KVM uses VMCB01 to store L1 host state while L2 runs but + * VMCB01 is going to be used during SMM and thus the state will + * be lost. Temporary save non-VMLOAD/VMSAVE state to the host save + * area pointed to by MSR_VM_HSAVE_PA. APM guarantees that the + * format of the area is identical to guest save area offsetted + * by 0x400 (matches the offset of 'struct vmcb_save_area' + * within 'struct vmcb'). Note: HSAVE area may also be used by + * L1 hypervisor to save additional host context (e.g. KVM does + * that, see svm_prepare_guest_switch()) which must be + * preserved. + */ + if (kvm_vcpu_map(vcpu, gpa_to_gfn(svm->nested.hsave_msr), + &map_save) == -EINVAL) + return 1; - BUILD_BUG_ON(offsetof(struct vmcb, save) != 0x400); + BUILD_BUG_ON(offsetof(struct vmcb, save) != 0x400); - svm_copy_vmrun_state(map_save.hva + 0x400, - &svm->vmcb01.ptr->save); + svm_copy_vmrun_state(map_save.hva + 0x400, + &svm->vmcb01.ptr->save); - kvm_vcpu_unmap(vcpu, &map_save, true); - } + kvm_vcpu_unmap(vcpu, &map_save, true); return 0; } @@ -4329,52 +4330,54 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) { struct vcpu_svm *svm = to_svm(vcpu); struct kvm_host_map map, map_save; - int ret = 0; + u64 saved_efer, vmcb12_gpa; + struct vmcb *vmcb12; + int ret; - if (guest_cpuid_has(vcpu, X86_FEATURE_LM)) { - u64 saved_efer = GET_SMSTATE(u64, smstate, 0x7ed0); - u64 guest = GET_SMSTATE(u64, smstate, 0x7ed8); - u64 vmcb12_gpa = GET_SMSTATE(u64, smstate, 0x7ee0); - struct vmcb *vmcb12; + if (!guest_cpuid_has(vcpu, X86_FEATURE_LM)) + return 0; - if (guest) { - if (!guest_cpuid_has(vcpu, X86_FEATURE_SVM)) - return 1; + /* Non-zero if SMI arrived while vCPU was in guest mode. */ + if (!GET_SMSTATE(u64, smstate, 0x7ed8)) + return 0; - if (!(saved_efer & EFER_SVME)) - return 1; + if (!guest_cpuid_has(vcpu, X86_FEATURE_SVM)) + return 1; - if (kvm_vcpu_map(vcpu, - gpa_to_gfn(vmcb12_gpa), &map) == -EINVAL) - return 1; + saved_efer = GET_SMSTATE(u64, smstate, 0x7ed0); + if (!(saved_efer & EFER_SVME)) + return 1; - if (svm_allocate_nested(svm)) - return 1; + vmcb12_gpa = GET_SMSTATE(u64, smstate, 0x7ee0); + if (kvm_vcpu_map(vcpu, gpa_to_gfn(vmcb12_gpa), &map) == -EINVAL) + return 1; - kvm_vcpu_unmap(vcpu, &map, true); + ret = 1; + if (kvm_vcpu_map(vcpu, gpa_to_gfn(svm->nested.hsave_msr), &map_save) == -EINVAL) + goto unmap_map; - /* - * Restore L1 host state from L1 HSAVE area as VMCB01 was - * used during SMM (see svm_enter_smm()) - */ - if (kvm_vcpu_map(vcpu, gpa_to_gfn(svm->nested.hsave_msr), - &map_save) == -EINVAL) - return 1; + if (svm_allocate_nested(svm)) + goto unmap_save; - svm_copy_vmrun_state(&svm->vmcb01.ptr->save, - map_save.hva + 0x400); + /* + * Restore L1 host state from L1 HSAVE area as VMCB01 was + * used during SMM (see svm_enter_smm()) + */ - /* - * Enter the nested guest now - */ - vmcb12 = map.hva; - nested_load_control_from_vmcb12(svm, &vmcb12->control); - ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, false); + svm_copy_vmrun_state(&svm->vmcb01.ptr->save, map_save.hva + 0x400); - kvm_vcpu_unmap(vcpu, &map_save, true); - } - } + /* + * Enter the nested guest now + */ + vmcb12 = map.hva; + nested_load_control_from_vmcb12(svm, &vmcb12->control); + ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, false); + +unmap_save: + kvm_vcpu_unmap(vcpu, &map_save, true); +unmap_map: + kvm_vcpu_unmap(vcpu, &map, true); return ret; } -- cgit v1.2.3 From c42dec148b3e1a88835e275b675e5155f99abd43 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:52 +0300 Subject: KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state Since no actual VM entry happened, the VM exit information is stale. To avoid this, synthesize an invalid VM guest state VM exit. Suggested-by: Sean Christopherson Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-6-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index f7eb0ce0ddb5..1c2296fa7f2b 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6622,10 +6622,21 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu) vmx->loaded_vmcs->soft_vnmi_blocked)) vmx->loaded_vmcs->entry_time = ktime_get(); - /* Don't enter VMX if guest state is invalid, let the exit handler - start emulation until we arrive back to a valid state */ - if (vmx->emulation_required) + /* + * Don't enter VMX if guest state is invalid, let the exit handler + * start emulation until we arrive back to a valid state. Synthesize a + * consistency check VM-Exit due to invalid guest state and bail. + */ + if (unlikely(vmx->emulation_required)) { + vmx->fail = 0; + vmx->exit_reason.full = EXIT_REASON_INVALID_STATE; + vmx->exit_reason.failed_vmentry = 1; + kvm_register_mark_available(vcpu, VCPU_EXREG_EXIT_INFO_1); + vmx->exit_qualification = ENTRY_FAIL_DEFAULT; + kvm_register_mark_available(vcpu, VCPU_EXREG_EXIT_INFO_2); + vmx->exit_intr_info = 0; return EXIT_FASTPATH_NONE; + } trace_kvm_entry(vcpu); -- cgit v1.2.3 From c8607e4a086fae05efe5bffb47c5199c65e7216e Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:53 +0300 Subject: KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry It is possible that when non root mode is entered via special entry (!from_vmentry), that is from SMM or from loading the nested state, the L2 state could be invalid in regard to non unrestricted guest mode, but later it can become valid. (for example when RSM emulation restores segment registers from SMRAM) Thus delay the check to VM entry, where we will check this and fail. Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-7-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/nested.c | 7 ++++++- arch/x86/kvm/vmx/vmx.c | 5 ++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index bc9c9cc228ea..b89c78e952b7 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -2583,8 +2583,13 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, * Guest state is invalid and unrestricted guest is disabled, * which means L1 attempted VMEntry to L2 with invalid state. * Fail the VMEntry. + * + * However when force loading the guest state (SMM exit or + * loading nested state after migration, it is possible to + * have invalid guest state now, which will be later fixed by + * restoring L2 register state */ - if (CC(!vmx_guest_state_valid(vcpu))) { + if (CC(from_vmentry && !vmx_guest_state_valid(vcpu))) { *entry_failure_code = ENTRY_FAIL_DEFAULT; return -EINVAL; } diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 1c2296fa7f2b..7df6f4b8931f 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6628,7 +6628,10 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu) * consistency check VM-Exit due to invalid guest state and bail. */ if (unlikely(vmx->emulation_required)) { - vmx->fail = 0; + + /* We don't emulate invalid state of a nested guest */ + vmx->fail = is_guest_mode(vcpu); + vmx->exit_reason.full = EXIT_REASON_INVALID_STATE; vmx->exit_reason.failed_vmentry = 1; kvm_register_mark_available(vcpu, VCPU_EXREG_EXIT_INFO_1); -- cgit v1.2.3 From dbab610a5be69c2c5e4fdd7135d14b6bab2667a5 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 13 Sep 2021 17:09:54 +0300 Subject: KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit If L1 had invalid state on VM entry (can happen on SMM transactions when we enter from real mode, straight to nested guest), then after we load 'host' state from VMCS12, the state has to become valid again, but since we load the segment registers with __vmx_set_segment we weren't always updating emulation_required. Update emulation_required explicitly at end of load_vmcs12_host_state. Signed-off-by: Maxim Levitsky Message-Id: <20210913140954.165665-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/nested.c | 2 ++ arch/x86/kvm/vmx/vmx.c | 8 ++++---- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index b89c78e952b7..eedcebf58004 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4356,6 +4356,8 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu, if (nested_vmx_load_msr(vcpu, vmcs12->vm_exit_msr_load_addr, vmcs12->vm_exit_msr_load_count)) nested_vmx_abort(vcpu, VMX_ABORT_LOAD_HOST_MSR_FAIL); + + to_vmx(vcpu)->emulation_required = vmx_emulation_required(vcpu); } static inline u64 nested_vmx_get_vmcs01_guest_efer(struct vcpu_vmx *vmx) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 7df6f4b8931f..9ecfcf13a046 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -1323,7 +1323,7 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu) vmx_prepare_switch_to_host(to_vmx(vcpu)); } -static bool emulation_required(struct kvm_vcpu *vcpu) +bool vmx_emulation_required(struct kvm_vcpu *vcpu) { return emulate_invalid_guest_state && !vmx_guest_state_valid(vcpu); } @@ -1367,7 +1367,7 @@ void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags) vmcs_writel(GUEST_RFLAGS, rflags); if ((old_rflags ^ vmx->rflags) & X86_EFLAGS_VM) - vmx->emulation_required = emulation_required(vcpu); + vmx->emulation_required = vmx_emulation_required(vcpu); } u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu) @@ -3078,7 +3078,7 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) } /* depends on vcpu->arch.cr0 to be set to a new value */ - vmx->emulation_required = emulation_required(vcpu); + vmx->emulation_required = vmx_emulation_required(vcpu); } static int vmx_get_max_tdp_level(void) @@ -3331,7 +3331,7 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int { __vmx_set_segment(vcpu, var, seg); - to_vmx(vcpu)->emulation_required = emulation_required(vcpu); + to_vmx(vcpu)->emulation_required = vmx_emulation_required(vcpu); } static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l) diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h index 02ab3468885f..592217fd7d92 100644 --- a/arch/x86/kvm/vmx/vmx.h +++ b/arch/x86/kvm/vmx/vmx.h @@ -355,6 +355,7 @@ void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu); void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel, unsigned long fs_base, unsigned long gs_base); int vmx_get_cpl(struct kvm_vcpu *vcpu); +bool vmx_emulation_required(struct kvm_vcpu *vcpu); unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu); void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags); u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu); -- cgit v1.2.3 From e1fc1553cd78292ab3521c94c9dd6e3e70e606a1 Mon Sep 17 00:00:00 2001 From: Fares Mehanna Date: Wed, 15 Sep 2021 13:39:50 +0000 Subject: kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[] Intel PMU MSRs is in msrs_to_save_all[], so add AMD PMU MSRs to have a consistent behavior between Intel and AMD when using KVM_GET_MSRS, KVM_SET_MSRS or KVM_GET_MSR_INDEX_LIST. We have to add legacy and new MSRs to handle guests running without X86_FEATURE_PERFCTR_CORE. Signed-off-by: Fares Mehanna Message-Id: <20210915133951.22389-1-faresx@amazon.de> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index ba70e8f11f2c..aabd3a2ec1bc 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1332,6 +1332,13 @@ static const u32 msrs_to_save_all[] = { MSR_ARCH_PERFMON_EVENTSEL0 + 12, MSR_ARCH_PERFMON_EVENTSEL0 + 13, MSR_ARCH_PERFMON_EVENTSEL0 + 14, MSR_ARCH_PERFMON_EVENTSEL0 + 15, MSR_ARCH_PERFMON_EVENTSEL0 + 16, MSR_ARCH_PERFMON_EVENTSEL0 + 17, + + MSR_K7_EVNTSEL0, MSR_K7_EVNTSEL1, MSR_K7_EVNTSEL2, MSR_K7_EVNTSEL3, + MSR_K7_PERFCTR0, MSR_K7_PERFCTR1, MSR_K7_PERFCTR2, MSR_K7_PERFCTR3, + MSR_F15H_PERF_CTL0, MSR_F15H_PERF_CTL1, MSR_F15H_PERF_CTL2, + MSR_F15H_PERF_CTL3, MSR_F15H_PERF_CTL4, MSR_F15H_PERF_CTL5, + MSR_F15H_PERF_CTR0, MSR_F15H_PERF_CTR1, MSR_F15H_PERF_CTR2, + MSR_F15H_PERF_CTR3, MSR_F15H_PERF_CTR4, MSR_F15H_PERF_CTR5, }; static u32 msrs_to_save[ARRAY_SIZE(msrs_to_save_all)]; -- cgit v1.2.3 From 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 1 Sep 2021 13:38:29 +0200 Subject: md: fix a lock order reversal in md_alloc Commit b0140891a8cea3 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891a8ce ("md: Fix race when creating a new md device.") Fixes: d62633873590 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Reviewed-by: NeilBrown Signed-off-by: Song Liu --- drivers/md/md.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index ae8fe54ea358..6c0c3d0d905a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5700,10 +5700,6 @@ static int md_alloc(dev_t dev, char *name) disk->flags |= GENHD_FL_EXT_DEVT; disk->events |= DISK_EVENT_MEDIA_CHANGE; mddev->gendisk = disk; - /* As soon as we call add_disk(), another thread could get - * through to md_open, so make sure it doesn't get too far - */ - mutex_lock(&mddev->open_mutex); add_disk(disk); error = kobject_add(&mddev->kobj, &disk_to_dev(disk)->kobj, "%s", "md"); @@ -5718,7 +5714,6 @@ static int md_alloc(dev_t dev, char *name) if (mddev->kobj.sd && sysfs_create_group(&mddev->kobj, &md_bitmap_group)) pr_debug("pointless warning\n"); - mutex_unlock(&mddev->open_mutex); abort: mutex_unlock(&disks_mutex); if (!error && mddev->kobj.sd) { -- cgit v1.2.3 From 8f1b7ba55c61d2c9f3a47a4759db43abfb59fc16 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 22 Sep 2021 08:35:58 +0200 Subject: MAINTAINERS: ARM/VT8500, remove defunct e-mail linux@prisktech.co.nz is defunct: 4.1.2 : Recipient address rejected: Domain not found Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan. Signed-off-by: Jiri Slaby Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ca6d6fde85cf..0227e15e2484 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2804,9 +2804,8 @@ F: arch/arm/mach-pxa/include/mach/vpac270.h F: arch/arm/mach-pxa/vpac270.c ARM/VT8500 ARM ARCHITECTURE -M: Tony Prisk L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Orphan F: Documentation/devicetree/bindings/i2c/i2c-wmt.txt F: arch/arm/mach-vt8500/ F: drivers/clocksource/timer-vt8500.c -- cgit v1.2.3 From bc0bdc5afaa740d782fbf936aaeebd65e5c2921d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 15 Sep 2021 17:21:43 -0300 Subject: RDMA/cma: Do not change route.addr.src_addr.ss_family If the state is not idle then rdma_bind_addr() will immediately fail and no change to global state should happen. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) To view a mangled src_addr, eg with a IPv6 loopback address but an IPv4 family, failing the test. This would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Which is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address build one explicitly on the stack and bind to that as any other normal flow would do. Link: https://lore.kernel.org/r/0-v1-9fbb33f5e201+2a-cma_listen_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: syzbot+6bb0528b13611047209c@syzkaller.appspotmail.com Tested-by: Hao Sun Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5aa58897965d..8862b0e572f0 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3783,9 +3783,13 @@ int rdma_listen(struct rdma_cm_id *id, int backlog) int ret; if (!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, RDMA_CM_LISTEN)) { + struct sockaddr_in any_in = { + .sin_family = AF_INET, + .sin_addr.s_addr = htonl(INADDR_ANY), + }; + /* For a well behaved ULP state will be RDMA_CM_IDLE */ - id->route.addr.src_addr.ss_family = AF_INET; - ret = rdma_bind_addr(id, cma_src_addr(id_priv)); + ret = rdma_bind_addr(id, (struct sockaddr *)&any_in); if (ret) return ret; if (WARN_ON(!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, -- cgit v1.2.3 From d81ff5fe14a950f53e2833cfa196e7bb3fd5d4e3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 10 Sep 2021 15:33:32 -0700 Subject: x86/asm: Fix SETZ size enqcmds() build failure When building under GCC 4.9 and 5.5: arch/x86/include/asm/special_insns.h: Assembler messages: arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz' Change the type to "bool" for condition code arguments, as documented. Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction") Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Signed-off-by: Kees Cook Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org --- arch/x86/include/asm/special_insns.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h index f3fbb84ff8a7..68c257a3de0d 100644 --- a/arch/x86/include/asm/special_insns.h +++ b/arch/x86/include/asm/special_insns.h @@ -275,7 +275,7 @@ static inline int enqcmds(void __iomem *dst, const void *src) { const struct { char _[64]; } *__src = src; struct { char _[64]; } __iomem *__dst = dst; - int zf; + bool zf; /* * ENQCMDS %(rdx), rax -- cgit v1.2.3 From 80f6e3080bfcf865062a926817b3ca6c4a137a57 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 16 Sep 2021 13:34:24 -0700 Subject: fs-verity: fix signed integer overflow with i_size near S64_MAX If the file size is almost S64_MAX, the calculated number of Merkle tree levels exceeds FS_VERITY_MAX_LEVELS, causing FS_IOC_ENABLE_VERITY to fail. This is unintentional, since as the comment above the definition of FS_VERITY_MAX_LEVELS states, it is enough for over U64_MAX bytes of data using SHA-256 and 4K blocks. (Specifically, 4096*128**8 >= 2**64.) The bug is actually that when the number of blocks in the first level is calculated from i_size, there is a signed integer overflow due to i_size being signed. Fix this by treating i_size as unsigned. This was found by the new test "generic: test fs-verity EFBIG scenarios" (https://lkml.kernel.org/r/b1d116cd4d0ea74b9cd86f349c672021e005a75c.1631558495.git.boris@bur.io). This didn't affect ext4 or f2fs since those have a smaller maximum file size, but it did affect btrfs which allows files up to S64_MAX bytes. Reported-by: Boris Burkov Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl") Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()") Cc: # v5.4+ Reviewed-by: Boris Burkov Link: https://lore.kernel.org/r/20210916203424.113376-1-ebiggers@kernel.org Signed-off-by: Eric Biggers --- fs/verity/enable.c | 2 +- fs/verity/open.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/verity/enable.c b/fs/verity/enable.c index 77e159a0346b..60a4372aa4d7 100644 --- a/fs/verity/enable.c +++ b/fs/verity/enable.c @@ -177,7 +177,7 @@ static int build_merkle_tree(struct file *filp, * (level 0) and ascending to the root node (level 'num_levels - 1'). * Then at the end (level 'num_levels'), calculate the root hash. */ - blocks = (inode->i_size + params->block_size - 1) >> + blocks = ((u64)inode->i_size + params->block_size - 1) >> params->log_blocksize; for (level = 0; level <= params->num_levels; level++) { err = build_merkle_tree_level(filp, level, blocks, params, diff --git a/fs/verity/open.c b/fs/verity/open.c index 60ff8af7219f..92df87f5fa38 100644 --- a/fs/verity/open.c +++ b/fs/verity/open.c @@ -89,7 +89,7 @@ int fsverity_init_merkle_tree_params(struct merkle_tree_params *params, */ /* Compute number of levels and the number of blocks in each level */ - blocks = (inode->i_size + params->block_size - 1) >> log_blocksize; + blocks = ((u64)inode->i_size + params->block_size - 1) >> log_blocksize; pr_debug("Data is %lld bytes (%llu blocks)\n", inode->i_size, blocks); while (blocks > 1) { if (params->num_levels >= FS_VERITY_MAX_LEVELS) { -- cgit v1.2.3 From c4aa1eeb093b09fbae9329a080172c58ace8da8c Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 22 Sep 2021 14:30:01 -0500 Subject: MAINTAINERS: update entry for NIOS2 Ley Foon has left Intel and will no longer be able to maintain NIOS2. Update the MAINTAINER's entry to Dinh Nguyen. Acked-by: Ley Foon Tan Signed-off-by: Dinh Nguyen Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0227e15e2484..4806d2156a80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13254,9 +13254,9 @@ F: Documentation/scsi/NinjaSCSI.rst F: drivers/scsi/nsp32* NIOS2 ARCHITECTURE -M: Ley Foon Tan +M: Dinh Nguyen S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git F: arch/nios2/ NITRO ENCLAVES (NE) -- cgit v1.2.3 From 2e36a964ada4f7bda24f3caa971a33500e23af36 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Sep 2021 12:16:51 -0400 Subject: MAINTAINERS: Update SWIOTLB maintainership Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Christoph Hellwig. Thank you! Acked-by: Christoph Hellwig Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4806d2156a80..a8a1b1c283e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17968,10 +17968,11 @@ F: Documentation/admin-guide/svga.rst F: arch/x86/boot/video* SWIOTLB SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Christoph Hellwig L: iommu@lists.linux-foundation.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git +W: http://git.infradead.org/users/hch/dma-mapping.git +T: git git://git.infradead.org/users/hch/dma-mapping.git F: arch/*/kernel/pci-swiotlb.c F: include/linux/swiotlb.h F: kernel/dma/swiotlb.c -- cgit v1.2.3 From 4057525736b159bd456732d11270af2cc49ec21f Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Sep 2021 12:16:52 -0400 Subject: MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainership MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Juergen, Roger, and Stefano. Thank you! Acked-by: Juergen Gross Acked-by: Roger Pau Monné Acked-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a8a1b1c283e2..2e75360c7b8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20475,7 +20475,6 @@ F: samples/bpf/xdpsock* F: tools/lib/bpf/xsk* XEN BLOCK SUBSYSTEM -M: Konrad Rzeszutek Wilk M: Roger Pau Monné L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported @@ -20523,7 +20522,7 @@ S: Supported F: drivers/net/xen-netback/* XEN PCI SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Juergen Gross L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/x86/pci/*xen* @@ -20546,7 +20545,8 @@ S: Supported F: sound/xen/* XEN SWIOTLB SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Juergen Gross +M: Stefano Stabellini L: xen-devel@lists.xenproject.org (moderated for non-subscribers) L: iommu@lists.linux-foundation.org S: Supported -- cgit v1.2.3 From 58e2cf5d794616b84f591d4d1276c8953278ce24 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Sep 2021 09:09:28 +0200 Subject: init: Revert accidental changes to print irqs_disabled() Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally changed init/main.c. Revert that part. Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c") Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- init/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/init/main.c b/init/main.c index 3f7216934441..81a79a77db46 100644 --- a/init/main.c +++ b/init/main.c @@ -1242,7 +1242,7 @@ trace_initcall_start_cb(void *data, initcall_t fn) { ktime_t *calltime = (ktime_t *)data; - printk(KERN_DEBUG "calling %pS @ %i irqs_disabled() %d\n", fn, task_pid_nr(current), irqs_disabled()); + printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current)); *calltime = ktime_get(); } @@ -1256,8 +1256,8 @@ trace_initcall_finish_cb(void *data, initcall_t fn, int ret) rettime = ktime_get(); delta = ktime_sub(rettime, *calltime); duration = (unsigned long long) ktime_to_ns(delta) >> 10; - printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs, irqs_disabled() %d\n", - fn, ret, duration, irqs_disabled()); + printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n", + fn, ret, duration); } static ktime_t initcall_calltime; -- cgit v1.2.3 From 18a015bccf9e8927008d0a255c9f14b8ec15a648 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Sep 2021 21:00:57 +0900 Subject: ksmbd: check protocol id in ksmbd_verify_smb_message() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When second smb2 pdu has invalid protocol id, ksmbd doesn't detect it and allow to process smb2 request. This patch add the check it in ksmbd_verify_smb_message() and don't use protocol id of smb2 request as protocol id of response. Reviewed-by: Ronnie Sahlberg Reviewed-by: Ralph Böhme Reported-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 2 +- fs/ksmbd/smb_common.c | 13 +++++++++---- fs/ksmbd/smb_common.h | 1 + 3 files changed, 11 insertions(+), 5 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index f59f9b8be51c..fd9d5595a5ca 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -433,7 +433,7 @@ static void init_chained_smb2_rsp(struct ksmbd_work *work) work->compound_pfid = KSMBD_NO_FID; } memset((char *)rsp_hdr + 4, 0, sizeof(struct smb2_hdr) + 2); - rsp_hdr->ProtocolId = rcv_hdr->ProtocolId; + rsp_hdr->ProtocolId = SMB2_PROTO_NUMBER; rsp_hdr->StructureSize = SMB2_HEADER_STRUCTURE_SIZE; rsp_hdr->Command = rcv_hdr->Command; diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 43d3123d8b62..40f4fafa2e11 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -129,16 +129,22 @@ int ksmbd_lookup_protocol_idx(char *str) * * check for valid smb signature and packet direction(request/response) * - * Return: 0 on success, otherwise 1 + * Return: 0 on success, otherwise -EINVAL */ int ksmbd_verify_smb_message(struct ksmbd_work *work) { - struct smb2_hdr *smb2_hdr = work->request_buf; + struct smb2_hdr *smb2_hdr = work->request_buf + work->next_smb2_rcv_hdr_off; + struct smb_hdr *hdr; if (smb2_hdr->ProtocolId == SMB2_PROTO_NUMBER) return ksmbd_smb2_check_message(work); - return 0; + hdr = work->request_buf; + if (*(__le32 *)hdr->Protocol == SMB1_PROTO_NUMBER && + hdr->Command == SMB_COM_NEGOTIATE) + return 0; + + return -EINVAL; } /** @@ -265,7 +271,6 @@ static int ksmbd_negotiate_smb_dialect(void *buf) return BAD_PROT_ID; } -#define SMB_COM_NEGOTIATE 0x72 int ksmbd_init_smb_server(struct ksmbd_work *work) { struct ksmbd_conn *conn = work->conn; diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h index 57c667c1be06..0a6af447cc45 100644 --- a/fs/ksmbd/smb_common.h +++ b/fs/ksmbd/smb_common.h @@ -210,6 +210,7 @@ FILE_READ_ATTRIBUTES | FILE_WRITE_ATTRIBUTES) #define SMB1_PROTO_NUMBER cpu_to_le32(0x424d53ff) +#define SMB_COM_NEGOTIATE 0x72 #define SMB1_CLIENT_GUID_SIZE (16) struct smb_hdr { -- cgit v1.2.3 From 4ea477988c423a57241ea4840b12832de6fabdfd Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 21 Sep 2021 14:19:33 +0900 Subject: ksmbd: remove follow symlinks support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use LOOKUP_NO_SYMLINKS flags for default lookup to prohibit the middle of symlink component lookup and remove follow symlinks parameter support. We re-implement it as reparse point later. Test result: smbclient -Ulinkinjeon%1234 //172.30.1.42/share -c "get hacked/passwd passwd" NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \hacked\passwd Cc: Ralph Böhme Cc: Steve French Acked-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 43 ++++++++++--------------------------------- fs/ksmbd/vfs.c | 32 +++++++++----------------------- 2 files changed, 19 insertions(+), 56 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index fd9d5595a5ca..0c49a0e887d3 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2632,13 +2632,9 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } - if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { - /* - * On delete request, instead of following up, need to - * look the current entity - */ - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - if (!rc) { + rc = ksmbd_vfs_kern_path(name, LOOKUP_NO_SYMLINKS, &path, 1); + if (!rc) { + if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { /* * If file exists with under flags, return access * denied error. @@ -2657,25 +2653,10 @@ int smb2_open(struct ksmbd_work *work) path_put(&path); goto err_out; } - } - } else { - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) { - /* - * Use LOOKUP_FOLLOW to follow the path of - * symlink in path buildup - */ - rc = ksmbd_vfs_kern_path(name, LOOKUP_FOLLOW, &path, 1); - if (rc) { /* Case for broken link ?*/ - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - } - } else { - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - if (!rc && d_is_symlink(path.dentry)) { - rc = -EACCES; - path_put(&path); - goto err_out; - } + } else if (d_is_symlink(path.dentry)) { + rc = -EACCES; + path_put(&path); + goto err_out; } } @@ -4751,12 +4732,8 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work, struct path path; int rc = 0, len; int fs_infoclass_size = 0; - int lookup_flags = 0; - - if (test_share_config_flag(share, KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - lookup_flags = LOOKUP_FOLLOW; - rc = ksmbd_vfs_kern_path(share->path, lookup_flags, &path, 0); + rc = ksmbd_vfs_kern_path(share->path, LOOKUP_NO_SYMLINKS, &path, 0); if (rc) { pr_err("cannot create vfs path\n"); return -EIO; @@ -5333,7 +5310,7 @@ static int smb2_rename(struct ksmbd_work *work, } ksmbd_debug(SMB, "new name %s\n", new_name); - rc = ksmbd_vfs_kern_path(new_name, 0, &path, 1); + rc = ksmbd_vfs_kern_path(new_name, LOOKUP_NO_SYMLINKS, &path, 1); if (rc) file_present = false; else @@ -5407,7 +5384,7 @@ static int smb2_create_link(struct ksmbd_work *work, } ksmbd_debug(SMB, "target name is %s\n", target_name); - rc = ksmbd_vfs_kern_path(link_name, 0, &path, 0); + rc = ksmbd_vfs_kern_path(link_name, LOOKUP_NO_SYMLINKS, &path, 0); if (rc) file_present = false; else diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c index b047f2980d96..3733e4944c1d 100644 --- a/fs/ksmbd/vfs.c +++ b/fs/ksmbd/vfs.c @@ -166,7 +166,7 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, 0); + dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_NO_SYMLINKS); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -ENOENT) @@ -203,7 +203,8 @@ int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_DIRECTORY); + dentry = kern_path_create(AT_FDCWD, name, &path, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -EEXIST) @@ -588,16 +589,11 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name) struct path path; struct dentry *parent; int err; - int flags = 0; if (ksmbd_override_fsids(work)) return -ENOMEM; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags = LOOKUP_FOLLOW; - - err = kern_path(name, flags, &path); + err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); if (err) { ksmbd_debug(VFS, "can't get %s, err %d\n", name, err); ksmbd_revert_fsids(work); @@ -652,16 +648,11 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, struct path oldpath, newpath; struct dentry *dentry; int err; - int flags = 0; if (ksmbd_override_fsids(work)) return -ENOMEM; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags = LOOKUP_FOLLOW; - - err = kern_path(oldname, flags, &oldpath); + err = kern_path(oldname, LOOKUP_NO_SYMLINKS, &oldpath); if (err) { pr_err("cannot get linux path for %s, err = %d\n", oldname, err); @@ -669,7 +660,7 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, } dentry = kern_path_create(AT_FDCWD, newname, &newpath, - flags | LOOKUP_REVAL); + LOOKUP_NO_SYMLINKS | LOOKUP_REVAL); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); pr_err("path create err for %s, err %d\n", newname, err); @@ -788,7 +779,6 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, struct dentry *src_dent, *trap_dent, *src_child; char *dst_name; int err; - int flags; dst_name = extract_last_component(newname); if (!dst_name) @@ -797,12 +787,8 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, src_dent_parent = dget_parent(fp->filp->f_path.dentry); src_dent = fp->filp->f_path.dentry; - flags = LOOKUP_DIRECTORY; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags |= LOOKUP_FOLLOW; - - err = kern_path(newname, flags, &dst_path); + err = kern_path(newname, LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &dst_path); if (err) { ksmbd_debug(VFS, "Cannot get path for %s [%d]\n", newname, err); goto out; @@ -861,7 +847,7 @@ int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, int err = 0; if (name) { - err = kern_path(name, 0, &path); + err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); if (err) { pr_err("cannot get linux path for %s, err %d\n", name, err); -- cgit v1.2.3 From 09d23174402da0f10e98da2c61bb5ac8e7d79fdd Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 20 Sep 2021 19:18:50 +0200 Subject: ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION The new framing mode causes the user space regression, because the alsa-lib code does not initialize the reserved space in the params structure when the device is opened. This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we do for the PCM interface for the protocol acknowledgment. Cc: David Henningsson Cc: Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode") BugLink: https://github.com/alsa-project/alsa-lib/issues/178 Signed-off-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz Signed-off-by: Takashi Iwai --- include/sound/rawmidi.h | 1 + include/uapi/sound/asound.h | 1 + sound/core/rawmidi.c | 9 +++++++++ 3 files changed, 11 insertions(+) diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h index 989e1517332d..7a08ed2acd60 100644 --- a/include/sound/rawmidi.h +++ b/include/sound/rawmidi.h @@ -98,6 +98,7 @@ struct snd_rawmidi_file { struct snd_rawmidi *rmidi; struct snd_rawmidi_substream *input; struct snd_rawmidi_substream *output; + unsigned int user_pversion; /* supported protocol version */ }; struct snd_rawmidi_str { diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index 1d84ec9db93b..5859ca0a1439 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -784,6 +784,7 @@ struct snd_rawmidi_status { #define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int) #define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info) +#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int) #define SNDRV_RAWMIDI_IOCTL_PARAMS _IOWR('W', 0x10, struct snd_rawmidi_params) #define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status) #define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 6c0a4a67ad2e..6f30231bdb88 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -873,12 +873,21 @@ static long snd_rawmidi_ioctl(struct file *file, unsigned int cmd, unsigned long return -EINVAL; } } + case SNDRV_RAWMIDI_IOCTL_USER_PVERSION: + if (get_user(rfile->user_pversion, (unsigned int __user *)arg)) + return -EFAULT; + return 0; + case SNDRV_RAWMIDI_IOCTL_PARAMS: { struct snd_rawmidi_params params; if (copy_from_user(¶ms, argp, sizeof(struct snd_rawmidi_params))) return -EFAULT; + if (rfile->user_pversion < SNDRV_PROTOCOL_VERSION(2, 0, 2)) { + params.mode = 0; + memset(params.reserved, 0, sizeof(params.reserved)); + } switch (params.stream) { case SNDRV_RAWMIDI_STREAM_OUTPUT: if (rfile->output == NULL) -- cgit v1.2.3 From 93ec1320b0170d7a207eda2d119c669b673401ed Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 22 Sep 2021 10:50:06 +0200 Subject: xfrm: fix rcu lock in xfrm_notify_userpolicy() As stated in the comment above xfrm_nlmsg_multicast(), rcu read lock must be held before calling this function. Reported-by: syzbot+3d9866419b4aa8f985d6@syzkaller.appspotmail.com Fixes: 703b94b93c19 ("xfrm: notify default policy on update") Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 0eba0c27c665..3a3cb09eec12 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1967,6 +1967,7 @@ static int xfrm_notify_userpolicy(struct net *net) int len = NLMSG_ALIGN(sizeof(*up)); struct nlmsghdr *nlh; struct sk_buff *skb; + int err; skb = nlmsg_new(len, GFP_ATOMIC); if (skb == NULL) @@ -1988,7 +1989,11 @@ static int xfrm_notify_userpolicy(struct net *net) nlmsg_end(skb, nlh); - return xfrm_nlmsg_multicast(net, skb, 0, XFRMNLGRP_POLICY); + rcu_read_lock(); + err = xfrm_nlmsg_multicast(net, skb, 0, XFRMNLGRP_POLICY); + rcu_read_unlock(); + + return err; } static int xfrm_set_default(struct sk_buff *skb, struct nlmsghdr *nlh, -- cgit v1.2.3 From c32dfec6c1c36bbbcd5d33e949d99aeb215877ec Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 22 Sep 2021 13:30:59 +0200 Subject: USB: serial: cp210x: fix dropped characters with CP2102 Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato Tested-by: Malte Di Donato Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 66a6ac50a4cd..b98454fe08ea 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -258,6 +258,7 @@ struct cp210x_serial_private { speed_t max_speed; bool use_actual_rate; bool no_flow_control; + bool no_event_mode; }; enum cp210x_event_state { @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret; if (port_priv->event_mode) return; + if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true; @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) } switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; case CP210X_PARTNUM_CP2105: case CP210X_PARTNUM_CP2108: cp210x_get_fw_version(serial, CP210X_GET_FW_VER); -- cgit v1.2.3 From 90ca6e7db83a06e9173bee5bb34ded3b37f4948d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 22 Sep 2021 13:31:00 +0200 Subject: USB: serial: cp210x: add part-number debug printk Add a part-number debug printk to facilitate debugging. Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b98454fe08ea..fd51498ab108 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -2140,6 +2140,8 @@ static void cp210x_determine_type(struct usb_serial *serial) return; } + dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum); + switch (priv->partnum) { case CP210X_PARTNUM_CP2102: cp2102_determine_quirks(serial); -- cgit v1.2.3 From 8cd9da85d2bd87ce889043e7b1735723dd10eb89 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 13 Sep 2021 16:53:32 +0200 Subject: posix-cpu-timers: Prevent spuriously armed 0-value itimer Resetting/stopping an itimer eventually leads to it being reprogrammed with an actual "0" value. As a result the itimer expires on the next tick, triggering an unexpected signal. To fix this, make sure that struct signal_struct::it[CPUCLOCK_PROF/VIRT]::expires is set to 0 when setitimer() passes a 0 it_value, indicating that the timer must stop. Fixes: 406dd42bd1ba ("posix-cpu-timers: Force next expiration recalc after itimer reset") Reported-by: Victor Stinner Reported-by: Chris Hixon Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210913145332.232023-1-frederic@kernel.org --- kernel/time/posix-cpu-timers.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index ee736861b18f..643d412ac623 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -1404,7 +1404,8 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clkid, } } - *newval += now; + if (*newval) + *newval += now; } /* -- cgit v1.2.3 From 98d46b021f6ee246c7a73f9d490d4cddb4511a3b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 6 Sep 2021 10:35:59 +0200 Subject: Revert "mac80211: do not use low data rates for data frames with no ack flag" This reverts commit d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag"). Returning false early in rate_control_send_low breaks sending broadcast packets, since rate control will not select a rate for it. Before re-introducing a fixed version of this patch, we should probably also make some changes to rate control to be more conservative in selecting rates for no-ack packets and also prevent using probing rates on them, since we won't get any feedback. Fixes: d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag") Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20210906083559.9109-1-nbd@nbd.name Signed-off-by: Johannes Berg --- net/mac80211/rate.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index e5935e3d7a07..8c6416129d5b 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -392,10 +392,6 @@ static bool rate_control_send_low(struct ieee80211_sta *pubsta, int mcast_rate; bool use_basicrate = false; - if (ieee80211_is_tx_data(txrc->skb) && - info->flags & IEEE80211_TX_CTL_NO_ACK) - return false; - if (!pubsta || rc_no_data_or_no_ack_use_min(txrc)) { __rate_control_send_low(txrc->hw, sband, pubsta, info, txrc->rate_idx_mask); -- cgit v1.2.3 From fe94bac626d9c1c5bc98ab32707be8a9d7f8adba Mon Sep 17 00:00:00 2001 From: Chih-Kang Chang Date: Mon, 30 Aug 2021 15:32:40 +0800 Subject: mac80211: Fix ieee80211_amsdu_aggregate frag_tail bug In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the end of skb_shinfo(head)->frag_list, and use it to bind other skb in the end of this function. But when execute ieee80211_amsdu_aggregate() ->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of skb_shinfo(head)->frag_list will be changed. However, the ieee80211_amsdu_aggregate() not update frag_tail after call pskb_expand_head(). That will cause the second skb can't bind to the head skb appropriately.So we update the address of frag_tail to fix it. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Chih-Kang Chang Signed-off-by: Zong-Zhe Yang Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com [reword comment] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2d1193ed3eb5..824bed71be13 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3380,6 +3380,14 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) goto out; + /* If n == 2, the "while (*frag_tail)" loop above didn't execute + * and frag_tail should be &skb_shinfo(head)->frag_list. + * However, ieee80211_amsdu_prepare_head() can reallocate it. + * Reload frag_tail to have it pointing to the correct place. + */ + if (n == 2) + frag_tail = &skb_shinfo(head)->frag_list; + /* * Pad out the previous subframe to a multiple of 4 by adding the * padding to the next one, that's being added. Note that head->len -- cgit v1.2.3 From a6555f844549cd190eb060daef595f94d3de1582 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 27 Aug 2021 22:42:30 +0800 Subject: mac80211: Drop frames from invalid MAC address in ad-hoc mode WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 99ed68f7dc36..c4071b015c18 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -4131,7 +4131,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx) if (!bssid) return false; if (ether_addr_equal(sdata->vif.addr, hdr->addr2) || - ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2)) + ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2) || + !is_valid_ether_addr(hdr->addr2)) return false; if (ieee80211_is_beacon(hdr->frame_control)) return true; -- cgit v1.2.3 From 13cb6d826e0ac0d144b0d48191ff1a111d32f0c6 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 20 Sep 2021 14:45:22 +0200 Subject: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 824bed71be13..8921088a5df6 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2209,7 +2209,11 @@ bool ieee80211_parse_tx_radiotap(struct sk_buff *skb, } vht_mcs = iterator.this_arg[4] >> 4; + if (vht_mcs > 11) + vht_mcs = 0; vht_nss = iterator.this_arg[4] & 0xF; + if (!vht_nss || vht_nss > 8) + vht_nss = 1; break; /* -- cgit v1.2.3 From b9731062ce8afd35cf723bf3a8ad55d208f915a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 20 Sep 2021 15:40:05 +0200 Subject: mac80211: mesh: fix potentially unaligned access The pointer here points directly into the frame, so the access is potentially unaligned. Use get_unaligned_le16 to avoid that. Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics") Link: https://lore.kernel.org/r/20210920154009.3110ff75be0c.Ib6a2ff9e9cc9bc6fca50fce631ec1ce725cc926b@changeid Signed-off-by: Johannes Berg --- net/mac80211/mesh_ps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index 204830a55240..3fbd0b9ff913 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -2,6 +2,7 @@ /* * Copyright 2012-2013, Marco Porsch * Copyright 2012-2013, cozybit Inc. + * Copyright (C) 2021 Intel Corporation */ #include "mesh.h" @@ -588,7 +589,7 @@ void ieee80211_mps_frame_release(struct sta_info *sta, /* only transmit to PS STA with announced, non-zero awake window */ if (test_sta_flag(sta, WLAN_STA_PS_STA) && - (!elems->awake_window || !le16_to_cpu(*elems->awake_window))) + (!elems->awake_window || !get_unaligned_le16(elems->awake_window))) return; if (!test_sta_flag(sta, WLAN_STA_MPSP_OWNER)) -- cgit v1.2.3 From 313bbd1990b6ddfdaa7da098d0c56b098a833572 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Sep 2021 11:29:37 +0200 Subject: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. Suggested-by: Thomas Gleixner Reported-by: Dmitry Vyukov Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ffa894f7312a..0adae76eb8df 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1867,8 +1867,8 @@ mac80211_hwsim_beacon(struct hrtimer *timer) bcn_int -= data->bcn_delta; data->bcn_delta = 0; } - hrtimer_forward(&data->beacon_timer, hrtimer_get_expires(timer), - ns_to_ktime(bcn_int * NSEC_PER_USEC)); + hrtimer_forward_now(&data->beacon_timer, + ns_to_ktime(bcn_int * NSEC_PER_USEC)); return HRTIMER_RESTART; } -- cgit v1.2.3 From 3106a0847525befe3e22fc723909d1b21eb0d520 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 22 Sep 2021 13:25:40 +0300 Subject: nexthop: Fix memory leaks in nexthop notification chain listeners syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [] slab_alloc_node mm/slub.c:3206 [inline] [] slab_alloc mm/slub.c:3214 [inline] [] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [] kmalloc include/linux/slab.h:591 [inline] [] kzalloc include/linux/slab.h:721 [inline] [] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [] nexthop_add net/ipv4/nexthop.c:2644 [inline] [] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [] sock_sendmsg_nosec net/socket.c:704 [inline] [] sock_sendmsg net/socket.c:724 [inline] [] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [] __do_sys_sendmsg net/socket.c:2501 [inline] [] __se_sys_sendmsg net/socket.c:2499 [inline] [] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- net/ipv4/nexthop.c | 19 ++++++++++++++----- 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 5a8df5a195cb..141635a35c28 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -4756,12 +4756,12 @@ static void __net_exit vxlan_exit_batch_net(struct list_head *net_list) LIST_HEAD(list); unsigned int h; - rtnl_lock(); list_for_each_entry(net, net_list, exit_list) { struct vxlan_net *vn = net_generic(net, vxlan_net_id); unregister_nexthop_notifier(net, &vn->nexthop_notifier_block); } + rtnl_lock(); list_for_each_entry(net, net_list, exit_list) vxlan_destroy_tunnels(net, &list); diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 0e75fd3e57b4..9e8100728d46 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -3567,6 +3567,7 @@ static struct notifier_block nh_netdev_notifier = { }; static int nexthops_dump(struct net *net, struct notifier_block *nb, + enum nexthop_event_type event_type, struct netlink_ext_ack *extack) { struct rb_root *root = &net->nexthop.rb_root; @@ -3577,8 +3578,7 @@ static int nexthops_dump(struct net *net, struct notifier_block *nb, struct nexthop *nh; nh = rb_entry(node, struct nexthop, rb_node); - err = call_nexthop_notifier(nb, net, NEXTHOP_EVENT_REPLACE, nh, - extack); + err = call_nexthop_notifier(nb, net, event_type, nh, extack); if (err) break; } @@ -3592,7 +3592,7 @@ int register_nexthop_notifier(struct net *net, struct notifier_block *nb, int err; rtnl_lock(); - err = nexthops_dump(net, nb, extack); + err = nexthops_dump(net, nb, NEXTHOP_EVENT_REPLACE, extack); if (err) goto unlock; err = blocking_notifier_chain_register(&net->nexthop.notifier_chain, @@ -3605,8 +3605,17 @@ EXPORT_SYMBOL(register_nexthop_notifier); int unregister_nexthop_notifier(struct net *net, struct notifier_block *nb) { - return blocking_notifier_chain_unregister(&net->nexthop.notifier_chain, - nb); + int err; + + rtnl_lock(); + err = blocking_notifier_chain_unregister(&net->nexthop.notifier_chain, + nb); + if (err) + goto unlock; + nexthops_dump(net, nb, NEXTHOP_EVENT_DEL, NULL); +unlock: + rtnl_unlock(); + return err; } EXPORT_SYMBOL(unregister_nexthop_notifier); -- cgit v1.2.3 From 5b099870c8e0eb026a1560894d94f827832491cf Mon Sep 17 00:00:00 2001 From: Guvenc Gulce Date: Wed, 22 Sep 2021 19:21:29 +0200 Subject: MAINTAINERS: remove Guvenc Gulce as net/smc maintainer Remove myself as net/smc maintainer, as I am leaving IBM soon and can not maintain net/smc anymore. Cc: Julian Wiedmann Acked-by: Karsten Graul Signed-off-by: Guvenc Gulce Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..3c814976443e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16955,7 +16955,6 @@ F: drivers/misc/sgi-xp/ SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS M: Karsten Graul -M: Guvenc Gulce L: linux-s390@vger.kernel.org S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ -- cgit v1.2.3 From 31339440b2d0a4987030aac026adbaba44e22490 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Sep 2021 19:30:37 +0100 Subject: nfc: st-nci: Add SPI ID matching DT compatible Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Signed-off-by: David S. Miller --- drivers/nfc/st-nci/spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c index a620c34790e6..0875b773fb41 100644 --- a/drivers/nfc/st-nci/spi.c +++ b/drivers/nfc/st-nci/spi.c @@ -278,6 +278,7 @@ static int st_nci_spi_remove(struct spi_device *dev) static struct spi_device_id st_nci_spi_id_table[] = { {ST_NCI_SPI_DRIVER_NAME, 0}, + {"st21nfcb-spi", 0}, {} }; MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); -- cgit v1.2.3 From e68daf61ed13832aef8892200a874139700ca754 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 22 Sep 2021 16:55:48 -0700 Subject: net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau Signed-off-by: Ilya Lipnitskiy Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c index b5f68f66d42a..7bb1f20002b5 100644 --- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c @@ -186,6 +186,9 @@ mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f) int hash; int i; + if (rhashtable_lookup(ð->flow_table, &f->cookie, mtk_flow_ht_params)) + return -EEXIST; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) { struct flow_match_meta match; -- cgit v1.2.3 From acc64f52afac15e9e44d9b5253271346841786e0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 22 Sep 2021 19:03:38 -0700 Subject: net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54ccca ("net: ocelot: support multiple bridges") Suggested-by: Colin Foster Reported-by: Colin Foster Signed-off-by: Vladimir Oltean Signed-off-by: Colin Foster Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 729ba826ba17..559177e6ded4 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -1293,14 +1293,19 @@ static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond, return mask; } -static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot, +static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot, int src_port, struct net_device *bridge) { + struct ocelot_port *ocelot_port = ocelot->ports[src_port]; u32 mask = 0; int port; + if (!ocelot_port || ocelot_port->bridge != bridge || + ocelot_port->stp_state != BR_STATE_FORWARDING) + return 0; + for (port = 0; port < ocelot->num_phys_ports; port++) { - struct ocelot_port *ocelot_port = ocelot->ports[port]; + ocelot_port = ocelot->ports[port]; if (!ocelot_port) continue; @@ -1366,7 +1371,7 @@ void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot) struct net_device *bridge = ocelot_port->bridge; struct net_device *bond = ocelot_port->bond; - mask = ocelot_get_bridge_fwd_mask(ocelot, bridge); + mask = ocelot_get_bridge_fwd_mask(ocelot, port, bridge); mask |= cpu_fwd_mask; mask &= ~BIT(port); if (bond) { -- cgit v1.2.3 From fdbccea419dc782079ce5881d2705cc9e3881480 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 23 Sep 2021 09:51:45 +0300 Subject: net/mlx4_en: Don't allow aRFS for encapsulated packets Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 35154635ec3a..8af7f2827322 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -372,6 +372,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, int nhoff = skb_network_offset(skb); int ret = 0; + if (skb->encapsulation) + return -EPROTONOSUPPORT; + if (skb->protocol != htons(ETH_P_IP)) return -EPROTONOSUPPORT; -- cgit v1.2.3 From 4d88c339c423eefe2fd48215016cb0c75fcb4c4d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 23 Sep 2021 03:16:05 -0700 Subject: atlantic: Fix issue in the pm resume flow. After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c index dee9ff74d6d6..d4b1976ee69b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c @@ -413,13 +413,13 @@ static int atl_resume_common(struct device *dev, bool deep) if (deep) { /* Reinitialize Nic/Vecs objects */ aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol); + } + if (netif_running(nic->ndev)) { ret = aq_nic_init(nic); if (ret) goto err_exit; - } - if (netif_running(nic->ndev)) { ret = aq_nic_start(nic); if (ret) goto err_exit; -- cgit v1.2.3 From aee77e1169c1900fe4248dc186962e745b479d9e Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 14 Sep 2021 18:48:12 +0300 Subject: KVM: x86: nSVM: restore int_vector in svm_clear_vintr In svm_clear_vintr we try to restore the virtual interrupt injection that might be pending, but we fail to restore the interrupt vector. Signed-off-by: Maxim Levitsky Message-Id: <20210914154825.104886-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 196bb3d22383..d674304d45a2 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1566,6 +1566,8 @@ static void svm_clear_vintr(struct vcpu_svm *svm) svm->vmcb->control.int_ctl |= svm->nested.ctl.int_ctl & V_IRQ_INJECTION_BITS_MASK; + + svm->vmcb->control.int_vector = svm->nested.ctl.int_vector; } vmcb_mark_dirty(svm->vmcb, VMCB_INTR); -- cgit v1.2.3 From 1ad32105d78e4b5da60688eca014bcd45271318f Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 14 Sep 2021 18:48:13 +0300 Subject: KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0 Test that if: * L1 disables virtual interrupt masking, and INTR intercept. * L1 setups a virtual interrupt to be injected to L2 and enters L2 with interrupts disabled, thus the virtual interrupt is pending. * Now an external interrupt arrives in L1 and since L1 doesn't intercept it, it should be delivered to L2 when it enables interrupts. to do this L0 (abuses) V_IRQ to setup an interrupt window, and returns to L2. * L2 enables interrupts. This should trigger the interrupt window, injection of the external interrupt and delivery of the virtual interrupt that can now be done. * Test that now L2 gets those interrupts. This is the test that demonstrates the issue that was fixed in the previous patch. Signed-off-by: Maxim Levitsky Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/x86_64/svm_int_ctl_test.c | 128 +++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 tools/testing/selftests/kvm/x86_64/svm_int_ctl_test.c diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 618bf9bc7f3f..b8dbabe24ac2 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -24,6 +24,7 @@ /x86_64/smm_test /x86_64/state_test /x86_64/svm_vmcall_test +/x86_64/svm_int_ctl_test /x86_64/sync_regs_test /x86_64/tsc_msrs_test /x86_64/userspace_msr_exit_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 9ac325cfc94a..d1774f461393 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -56,6 +56,7 @@ TEST_GEN_PROGS_x86_64 += x86_64/smm_test TEST_GEN_PROGS_x86_64 += x86_64/state_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_preemption_timer_test TEST_GEN_PROGS_x86_64 += x86_64/svm_vmcall_test +TEST_GEN_PROGS_x86_64 += x86_64/svm_int_ctl_test TEST_GEN_PROGS_x86_64 += x86_64/sync_regs_test TEST_GEN_PROGS_x86_64 += x86_64/userspace_msr_exit_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_apic_access_test diff --git a/tools/testing/selftests/kvm/x86_64/svm_int_ctl_test.c b/tools/testing/selftests/kvm/x86_64/svm_int_ctl_test.c new file mode 100644 index 000000000000..df04f56ce859 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/svm_int_ctl_test.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * svm_int_ctl_test + * + * Copyright (C) 2021, Red Hat, Inc. + * + * Nested SVM testing: test simultaneous use of V_IRQ from L1 and L0. + */ + +#include "test_util.h" +#include "kvm_util.h" +#include "processor.h" +#include "svm_util.h" +#include "apic.h" + +#define VCPU_ID 0 + +static struct kvm_vm *vm; + +bool vintr_irq_called; +bool intr_irq_called; + +#define VINTR_IRQ_NUMBER 0x20 +#define INTR_IRQ_NUMBER 0x30 + +static void vintr_irq_handler(struct ex_regs *regs) +{ + vintr_irq_called = true; +} + +static void intr_irq_handler(struct ex_regs *regs) +{ + x2apic_write_reg(APIC_EOI, 0x00); + intr_irq_called = true; +} + +static void l2_guest_code(struct svm_test_data *svm) +{ + /* This code raises interrupt INTR_IRQ_NUMBER in the L1's LAPIC, + * and since L1 didn't enable virtual interrupt masking, + * L2 should receive it and not L1. + * + * L2 also has virtual interrupt 'VINTR_IRQ_NUMBER' pending in V_IRQ + * so it should also receive it after the following 'sti'. + */ + x2apic_write_reg(APIC_ICR, + APIC_DEST_SELF | APIC_INT_ASSERT | INTR_IRQ_NUMBER); + + __asm__ __volatile__( + "sti\n" + "nop\n" + ); + + GUEST_ASSERT(vintr_irq_called); + GUEST_ASSERT(intr_irq_called); + + __asm__ __volatile__( + "vmcall\n" + ); +} + +static void l1_guest_code(struct svm_test_data *svm) +{ + #define L2_GUEST_STACK_SIZE 64 + unsigned long l2_guest_stack[L2_GUEST_STACK_SIZE]; + struct vmcb *vmcb = svm->vmcb; + + x2apic_enable(); + + /* Prepare for L2 execution. */ + generic_svm_setup(svm, l2_guest_code, + &l2_guest_stack[L2_GUEST_STACK_SIZE]); + + /* No virtual interrupt masking */ + vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK; + + /* No intercepts for real and virtual interrupts */ + vmcb->control.intercept &= ~(1ULL << INTERCEPT_INTR | INTERCEPT_VINTR); + + /* Make a virtual interrupt VINTR_IRQ_NUMBER pending */ + vmcb->control.int_ctl |= V_IRQ_MASK | (0x1 << V_INTR_PRIO_SHIFT); + vmcb->control.int_vector = VINTR_IRQ_NUMBER; + + run_guest(vmcb, svm->vmcb_gpa); + GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_VMMCALL); + GUEST_DONE(); +} + +int main(int argc, char *argv[]) +{ + vm_vaddr_t svm_gva; + + nested_svm_check_supported(); + + vm = vm_create_default(VCPU_ID, 0, (void *) l1_guest_code); + + vm_init_descriptor_tables(vm); + vcpu_init_descriptor_tables(vm, VCPU_ID); + + vm_install_exception_handler(vm, VINTR_IRQ_NUMBER, vintr_irq_handler); + vm_install_exception_handler(vm, INTR_IRQ_NUMBER, intr_irq_handler); + + vcpu_alloc_svm(vm, &svm_gva); + vcpu_args_set(vm, VCPU_ID, 1, svm_gva); + + struct kvm_run *run = vcpu_state(vm, VCPU_ID); + struct ucall uc; + + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Got exit_reason other than KVM_EXIT_IO: %u (%s)\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); + + switch (get_ucall(vm, VCPU_ID, &uc)) { + case UCALL_ABORT: + TEST_FAIL("%s", (const char *)uc.args[0]); + break; + /* NOT REACHED */ + case UCALL_DONE: + goto done; + default: + TEST_FAIL("Unknown ucall 0x%lx.", uc.cmd); + } +done: + kvm_vm_free(vm); + return 0; +} -- cgit v1.2.3 From d1cba6c9223751f580dcd97501f513a8a9bf88bc Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 14 Sep 2021 18:48:14 +0300 Subject: KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround GP SVM errata workaround made the #GP handler always emulate the SVM instructions. However these instructions #GP in case the operand is not 4K aligned, but the workaround code didn't check this and we ended up emulating these instructions anyway. This is only an emulation accuracy check bug as there is no harm for KVM to read/write unaligned vmcb images. Fixes: 82a11e9c6fa2 ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions") Signed-off-by: Maxim Levitsky Message-Id: <20210914154825.104886-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index d674304d45a2..989685098b3e 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -2224,6 +2224,10 @@ static int gp_interception(struct kvm_vcpu *vcpu) if (error_code) goto reinject; + /* All SVM instructions expect page aligned RAX */ + if (svm->vmcb->save.rax & ~PAGE_MASK) + goto reinject; + /* Decode the instruction for usage later */ if (x86_decode_emulated_instruction(vcpu, 0, NULL, 0) != EMULATION_OK) goto reinject; -- cgit v1.2.3 From faf6b755629627f19feafa75b32e81cd7738f12d Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 14 Sep 2021 18:48:16 +0300 Subject: KVM: x86: nSVM: don't copy virt_ext from vmcb12 These field correspond to features that we don't expose yet to L2 While currently there are no CVE worthy features in this field, if AMD adds more features to this field, that could allow guest escapes similar to CVE-2021-3653 and CVE-2021-3656. Signed-off-by: Maxim Levitsky Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/nested.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c index b41a21cac544..510b833cbd39 100644 --- a/arch/x86/kvm/svm/nested.c +++ b/arch/x86/kvm/svm/nested.c @@ -545,7 +545,6 @@ static void nested_vmcb02_prepare_control(struct vcpu_svm *svm) (svm->nested.ctl.int_ctl & int_ctl_vmcb12_bits) | (svm->vmcb01.ptr->control.int_ctl & int_ctl_vmcb01_bits); - svm->vmcb->control.virt_ext = svm->nested.ctl.virt_ext; svm->vmcb->control.int_vector = svm->nested.ctl.int_vector; svm->vmcb->control.int_state = svm->nested.ctl.int_state; svm->vmcb->control.event_inj = svm->nested.ctl.event_inj; -- cgit v1.2.3 From f81602958c115fc7c87b985f71574042a20ff858 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sat, 18 Sep 2021 08:56:27 +0800 Subject: KVM: X86: Fix missed remote tlb flush in rmap_write_protect() When kvm->tlbs_dirty > 0, some rmaps might have been deleted without flushing tlb remotely after kvm_sync_page(). If @gfn was writable before and it's rmaps was deleted in kvm_sync_page(), and if the tlb entry is still in a remote running VCPU, the @gfn is not safely protected. To fix the problem, kvm_sync_page() does the remote flush when needed to avoid the problem. Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan Signed-off-by: Paolo Bonzini Message-Id: <20210918005636.3675-2-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/paging_tmpl.h | 23 ++--------------------- 1 file changed, 2 insertions(+), 21 deletions(-) diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h index 7d03e9b7ccfa..efce0a935e23 100644 --- a/arch/x86/kvm/mmu/paging_tmpl.h +++ b/arch/x86/kvm/mmu/paging_tmpl.h @@ -1047,14 +1047,6 @@ static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gpa_t vaddr, * Using the cached information from sp->gfns is safe because: * - The spte has a reference to the struct page, so the pfn for a given gfn * can't change unless all sptes pointing to it are nuked first. - * - * Note: - * We should flush all tlbs if spte is dropped even though guest is - * responsible for it. Since if we don't, kvm_mmu_notifier_invalidate_page - * and kvm_mmu_notifier_invalidate_range_start detect the mapping page isn't - * used by guest then tlbs are not flushed, so guest is allowed to access the - * freed pages. - * And we increase kvm->tlbs_dirty to delay tlbs flush in this case. */ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) { @@ -1107,13 +1099,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) return 0; if (FNAME(prefetch_invalid_gpte)(vcpu, sp, &sp->spt[i], gpte)) { - /* - * Update spte before increasing tlbs_dirty to make - * sure no tlb flush is lost after spte is zapped; see - * the comments in kvm_flush_remote_tlbs(). - */ - smp_wmb(); - vcpu->kvm->tlbs_dirty++; + set_spte_ret |= SET_SPTE_NEED_REMOTE_TLB_FLUSH; continue; } @@ -1128,12 +1114,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) if (gfn != sp->gfns[i]) { drop_spte(vcpu->kvm, &sp->spt[i]); - /* - * The same as above where we are doing - * prefetch_invalid_gpte(). - */ - smp_wmb(); - vcpu->kvm->tlbs_dirty++; + set_spte_ret |= SET_SPTE_NEED_REMOTE_TLB_FLUSH; continue; } -- cgit v1.2.3 From 22b70e6f2da0a4c8b1421b00cfc3016bc9d4d9d4 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Thu, 23 Sep 2021 08:50:02 -0600 Subject: arm64: Restore forced disabling of KPTI on ThunderX A noted side-effect of commit 0c6c2d3615ef ("arm64: Generate cpucaps.h") is that cpucaps are now sorted, changing the enumeration order. This assumed no dependencies between cpucaps, which turned out not to be true in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered when unmap_kernel_at_el0() checks for it, so the kernel tries to run w/ KPTI - and quickly falls over. Because all ThunderX implementations have homogeneous CPUs, we can remove this dependency by just checking the current CPU for the erratum. Fixes: 0c6c2d3615ef ("arm64: Generate cpucaps.h") Cc: # 5.13.x Signed-off-by: dann frazier Suggested-by: Suzuki K Poulose Reviewed-by: Suzuki K Poulose Reviewed-by: Mark Brown Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com Signed-off-by: Catalin Marinas --- arch/arm64/kernel/cpufeature.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index f8a3067d10c6..6ec7036ef7e1 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1526,9 +1526,13 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, /* * For reasons that aren't entirely clear, enabling KPTI on Cavium * ThunderX leads to apparent I-cache corruption of kernel text, which - * ends as well as you might imagine. Don't even try. + * ends as well as you might imagine. Don't even try. We cannot rely + * on the cpus_have_*cap() helpers here to detect the CPU erratum + * because cpucap detection order may change. However, since we know + * affected CPUs are always in a homogeneous configuration, it is + * safe to rely on this_cpu_has_cap() here. */ - if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_27456)) { + if (this_cpu_has_cap(ARM64_WORKAROUND_CAVIUM_27456)) { str = "ARM64_WORKAROUND_CAVIUM_27456"; __kpti_forced = -1; } -- cgit v1.2.3 From 65855ed8b03437e79e42f2a89a993206981ac6cb Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sat, 18 Sep 2021 08:56:28 +0800 Subject: KVM: X86: Synchronize the shadow pagetable before link it If gpte is changed from non-present to present, the guest doesn't need to flush tlb per SDM. So the host must synchronze sp before link it. Otherwise the guest might use a wrong mapping. For example: the guest first changes a level-1 pagetable, and then links its parent to a new place where the original gpte is non-present. Finally the guest can access the remapped area without flushing the tlb. The guest's behavior should be allowed per SDM, but the host kvm mmu makes it wrong. Fixes: 4731d4c7a077 ("KVM: MMU: out of sync shadow core") Signed-off-by: Lai Jiangshan Signed-off-by: Paolo Bonzini Message-Id: <20210918005636.3675-3-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/mmu.c | 17 ++++++++++------- arch/x86/kvm/mmu/paging_tmpl.h | 23 +++++++++++++++++++++-- 2 files changed, 31 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index 2d7e61122af8..1a64ba5b9437 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -2027,8 +2027,8 @@ static void mmu_pages_clear_parents(struct mmu_page_path *parents) } while (!sp->unsync_children); } -static void mmu_sync_children(struct kvm_vcpu *vcpu, - struct kvm_mmu_page *parent) +static int mmu_sync_children(struct kvm_vcpu *vcpu, + struct kvm_mmu_page *parent, bool can_yield) { int i; struct kvm_mmu_page *sp; @@ -2055,12 +2055,18 @@ static void mmu_sync_children(struct kvm_vcpu *vcpu, } if (need_resched() || rwlock_needbreak(&vcpu->kvm->mmu_lock)) { kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush); + if (!can_yield) { + kvm_make_request(KVM_REQ_MMU_SYNC, vcpu); + return -EINTR; + } + cond_resched_rwlock_write(&vcpu->kvm->mmu_lock); flush = false; } } kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush); + return 0; } static void __clear_sp_write_flooding_count(struct kvm_mmu_page *sp) @@ -2146,9 +2152,6 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu); } - if (sp->unsync_children) - kvm_make_request(KVM_REQ_MMU_SYNC, vcpu); - __clear_sp_write_flooding_count(sp); trace_get_page: @@ -3684,7 +3687,7 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu) write_lock(&vcpu->kvm->mmu_lock); kvm_mmu_audit(vcpu, AUDIT_PRE_SYNC); - mmu_sync_children(vcpu, sp); + mmu_sync_children(vcpu, sp, true); kvm_mmu_audit(vcpu, AUDIT_POST_SYNC); write_unlock(&vcpu->kvm->mmu_lock); @@ -3700,7 +3703,7 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu) if (IS_VALID_PAE_ROOT(root)) { root &= PT64_BASE_ADDR_MASK; sp = to_shadow_page(root); - mmu_sync_children(vcpu, sp); + mmu_sync_children(vcpu, sp, true); } } diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h index efce0a935e23..913d52a7923e 100644 --- a/arch/x86/kvm/mmu/paging_tmpl.h +++ b/arch/x86/kvm/mmu/paging_tmpl.h @@ -707,8 +707,27 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gpa_t addr, if (!is_shadow_present_pte(*it.sptep)) { table_gfn = gw->table_gfn[it.level - 2]; access = gw->pt_access[it.level - 2]; - sp = kvm_mmu_get_page(vcpu, table_gfn, addr, it.level-1, - false, access); + sp = kvm_mmu_get_page(vcpu, table_gfn, addr, + it.level-1, false, access); + /* + * We must synchronize the pagetable before linking it + * because the guest doesn't need to flush tlb when + * the gpte is changed from non-present to present. + * Otherwise, the guest may use the wrong mapping. + * + * For PG_LEVEL_4K, kvm_mmu_get_page() has already + * synchronized it transiently via kvm_sync_page(). + * + * For higher level pagetable, we synchronize it via + * the slower mmu_sync_children(). If it needs to + * break, some progress has been made; return + * RET_PF_RETRY and retry on the next #PF. + * KVM_REQ_MMU_SYNC is not necessary but it + * expedites the process. + */ + if (sp->unsync_children && + mmu_sync_children(vcpu, sp, false)) + return RET_PF_RETRY; } /* -- cgit v1.2.3 From 6bc6db000295332bae2c1e8815d7450b72923d23 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sat, 18 Sep 2021 08:56:29 +0800 Subject: KVM: Remove tlbs_dirty There is no user of tlbs_dirty. Signed-off-by: Lai Jiangshan Signed-off-by: Paolo Bonzini Message-Id: <20210918005636.3675-4-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini --- include/linux/kvm_host.h | 1 - virt/kvm/kvm_main.c | 10 ++-------- 2 files changed, 2 insertions(+), 9 deletions(-) diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 000ea73dd324..0f18df7fe874 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -608,7 +608,6 @@ struct kvm { unsigned long mmu_notifier_range_start; unsigned long mmu_notifier_range_end; #endif - long tlbs_dirty; struct list_head devices; u64 manual_dirty_log_protect; struct dentry *debugfs_dentry; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index e95e7a9e4d53..7851f3a1b5f7 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -326,13 +326,8 @@ EXPORT_SYMBOL_GPL(kvm_make_all_cpus_request); #ifndef CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL void kvm_flush_remote_tlbs(struct kvm *kvm) { - /* - * Read tlbs_dirty before setting KVM_REQ_TLB_FLUSH in - * kvm_make_all_cpus_request. - */ - long dirty_count = smp_load_acquire(&kvm->tlbs_dirty); - ++kvm->stat.generic.remote_tlb_flush_requests; + /* * We want to publish modifications to the page tables before reading * mode. Pairs with a memory barrier in arch-specific code. @@ -347,7 +342,6 @@ void kvm_flush_remote_tlbs(struct kvm *kvm) if (!kvm_arch_flush_remote_tlb(kvm) || kvm_make_all_cpus_request(kvm, KVM_REQ_TLB_FLUSH)) ++kvm->stat.generic.remote_tlb_flush; - cmpxchg(&kvm->tlbs_dirty, dirty_count, 0); } EXPORT_SYMBOL_GPL(kvm_flush_remote_tlbs); #endif @@ -552,7 +546,7 @@ static __always_inline int __kvm_handle_hva_range(struct kvm *kvm, } } - if (range->flush_on_ret && (ret || kvm->tlbs_dirty)) + if (range->flush_on_ret && ret) kvm_flush_remote_tlbs(kvm); if (locked) -- cgit v1.2.3 From 93368aab0efc87288cac65e99c9ed2e0ffc9e7d0 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Tue, 21 Sep 2021 22:35:30 +0800 Subject: erofs: fix up erofs_lookup tracepoint Fix up a misuse that the filename pointer isn't always valid in the ring buffer, and we should copy the content instead. Link: https://lore.kernel.org/r/20210921143531.81356-1-hsiangkao@linux.alibaba.com Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint") Cc: stable@vger.kernel.org # 4.19+ Reviewed-by: Chao Yu Signed-off-by: Gao Xiang --- include/trace/events/erofs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/trace/events/erofs.h b/include/trace/events/erofs.h index bf9806fd1306..db4f2cec8360 100644 --- a/include/trace/events/erofs.h +++ b/include/trace/events/erofs.h @@ -35,20 +35,20 @@ TRACE_EVENT(erofs_lookup, TP_STRUCT__entry( __field(dev_t, dev ) __field(erofs_nid_t, nid ) - __field(const char *, name ) + __string(name, dentry->d_name.name ) __field(unsigned int, flags ) ), TP_fast_assign( __entry->dev = dir->i_sb->s_dev; __entry->nid = EROFS_I(dir)->nid; - __entry->name = dentry->d_name.name; + __assign_str(name, dentry->d_name.name); __entry->flags = flags; ), TP_printk("dev = (%d,%d), pnid = %llu, name:%s, flags:%x", show_dev_nid(__entry), - __entry->name, + __get_str(name), __entry->flags) ); -- cgit v1.2.3 From d705117ddd724a9d4877e338e4587010ab6a1c62 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Wed, 22 Sep 2021 17:51:41 +0800 Subject: erofs: fix misbehavior of unsupported chunk format check Unsupported chunk format should be checked with "if (vi->chunkformat & ~EROFS_CHUNK_FORMAT_ALL)" Found when checking with 4k-byte blockmap (although currently mkfs uses inode chunk indexes format by default.) Link: https://lore.kernel.org/r/20210922095141.233938-1-hsiangkao@linux.alibaba.com Fixes: c5aa903a59db ("erofs: support reading chunk-based uncompressed files") Reviewed-by: Liu Bo Reviewed-by: Chao Yu Signed-off-by: Gao Xiang --- fs/erofs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/erofs/inode.c b/fs/erofs/inode.c index 31ac3a73b390..a552399e211d 100644 --- a/fs/erofs/inode.c +++ b/fs/erofs/inode.c @@ -176,7 +176,7 @@ static struct page *erofs_read_inode(struct inode *inode, } if (vi->datalayout == EROFS_INODE_CHUNK_BASED) { - if (!(vi->chunkformat & EROFS_CHUNK_FORMAT_ALL)) { + if (vi->chunkformat & ~EROFS_CHUNK_FORMAT_ALL) { erofs_err(inode->i_sb, "unsupported chunk format %x of nid %llu", vi->chunkformat, vi->nid); -- cgit v1.2.3 From c40dd3ca2a45d5bd6e8b3f4ace5cb81493096263 Mon Sep 17 00:00:00 2001 From: Yue Hu Date: Tue, 14 Sep 2021 11:59:15 +0800 Subject: erofs: clear compacted_2b if compacted_4b_initial > totalidx Currently, the whole indexes will only be compacted 4B if compacted_4b_initial > totalidx. So, the calculated compacted_2b is worthless for that case. It may waste CPU resources. No need to update compacted_4b_initial as mkfs since it's used to fulfill the alignment of the 1st compacted_2b pack and would handle the case above. We also need to clarify compacted_4b_end here. It's used for the last lclusters which aren't fitted in the previous compacted_2b packs. Some messages are from Xiang. Link: https://lore.kernel.org/r/20210914035915.1190-1-zbestahu@gmail.com Signed-off-by: Yue Hu Reviewed-by: Gao Xiang Reviewed-by: Chao Yu [ Gao Xiang: it's enough to use "compacted_4b_initial < totalidx". ] Signed-off-by: Gao Xiang --- fs/erofs/zmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/erofs/zmap.c b/fs/erofs/zmap.c index 9fb98d85a3ce..7a6df35fdc91 100644 --- a/fs/erofs/zmap.c +++ b/fs/erofs/zmap.c @@ -369,7 +369,8 @@ static int compacted_load_cluster_from_disk(struct z_erofs_maprecorder *m, if (compacted_4b_initial == 32 / 4) compacted_4b_initial = 0; - if (vi->z_advise & Z_EROFS_ADVISE_COMPACTED_2B) + if ((vi->z_advise & Z_EROFS_ADVISE_COMPACTED_2B) && + compacted_4b_initial < totalidx) compacted_2b = rounddown(totalidx - compacted_4b_initial, 16); else compacted_2b = 0; -- cgit v1.2.3 From d2846bf33c1423ff872c7a7c2afde292ad502c04 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 18 Sep 2021 21:56:19 +0200 Subject: fs/ntfs3: Remove a useless test in 'indx_find()' 'fnd' has been dereferenced several time before, so testing it here is pointless. Moreover, all callers of 'indx_find()' already have some error handling code that makes sure that no NULL 'fnd' is passed. So, remove the useless test. Signed-off-by: Christophe JAILLET Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/index.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index 4f71a91f07d9..6f81e3a49abf 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -1072,9 +1072,7 @@ int indx_find(struct ntfs_index *indx, struct ntfs_inode *ni, if (!e) return -EINVAL; - if (fnd) - fnd->root_de = e; - + fnd->root_de = e; err = 0; for (;;) { -- cgit v1.2.3 From 808bc0a82bcd2cbe32a139613325b1a3e03f35f1 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 18 Sep 2021 21:56:28 +0200 Subject: fs/ntfs3: Remove a useless shadowing variable There is already a 'u8 mask' defined at the top of the function. There is no need to define a new one here. Remove the useless and shadowing new 'mask' variable. Signed-off-by: Christophe JAILLET Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/bitfunc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ntfs3/bitfunc.c b/fs/ntfs3/bitfunc.c index bf10e2da5c6e..50d838093790 100644 --- a/fs/ntfs3/bitfunc.c +++ b/fs/ntfs3/bitfunc.c @@ -119,8 +119,7 @@ bool are_bits_set(const ulong *lmap, size_t bit, size_t nbits) pos = nbits & 7; if (pos) { - u8 mask = fill_mask[pos]; - + mask = fill_mask[pos]; if ((*map & mask) != mask) return false; } -- cgit v1.2.3 From 82cb875313188ccbd3ac174b471c86dcb97b8626 Mon Sep 17 00:00:00 2001 From: Kari Argillander Date: Tue, 21 Sep 2021 20:19:01 +0300 Subject: fs/ntfs3: Remove deprecated mount options nls Some discussion has been spoken that this deprecated mount options should be removed before 5.15 lands. This driver is not never seen day light so it was decided that nls mount option has to be removed. We have always possibility to add this if needed. One possible need is example if current ntfs driver will be taken out of kernel and ntfs3 needs to support mount options what it has. Signed-off-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 6a535b144ff9..800897777eb0 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -246,10 +246,6 @@ static const struct fs_parameter_spec ntfs_fs_parameters[] = { fsparam_flag_no("prealloc", Opt_prealloc), fsparam_flag_no("acsrules", Opt_noacsrules), fsparam_string("iocharset", Opt_iocharset), - - __fsparam(fs_param_is_string, - "nls", Opt_iocharset, - fs_param_deprecated, NULL), {} }; -- cgit v1.2.3 From a3727a8bac0a9e77c70820655fd8715523ba3db7 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Thu, 23 Sep 2021 09:50:11 -0400 Subject: selinux,smack: fix subjective/objective credential use mixups Jann Horn reported a problem with commit eb1231f73c4d ("selinux: clarify task subjective and objective credentials") where some LSM hooks were attempting to access the subjective credentials of a task other than the current task. Generally speaking, it is not safe to access another task's subjective credentials and doing so can cause a number of problems. Further, while looking into the problem, I realized that Smack was suffering from a similar problem brought about by a similar commit 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials"). This patch addresses this problem by restoring the use of the task's objective credentials in those cases where the task is other than the current executing task. Not only does this resolve the problem reported by Jann, it is arguably the correct thing to do in these cases. Cc: stable@vger.kernel.org Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials") Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials") Reported-by: Jann Horn Acked-by: Eric W. Biederman Acked-by: Casey Schaufler Signed-off-by: Paul Moore --- security/selinux/hooks.c | 4 ++-- security/smack/smack_lsm.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 6517f221d52c..e7ebd45ca345 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2157,7 +2157,7 @@ static int selinux_ptrace_access_check(struct task_struct *child, static int selinux_ptrace_traceme(struct task_struct *parent) { return avc_has_perm(&selinux_state, - task_sid_subj(parent), task_sid_obj(current), + task_sid_obj(parent), task_sid_obj(current), SECCLASS_PROCESS, PROCESS__PTRACE, NULL); } @@ -6222,7 +6222,7 @@ static int selinux_msg_queue_msgrcv(struct kern_ipc_perm *msq, struct msg_msg *m struct ipc_security_struct *isec; struct msg_security_struct *msec; struct common_audit_data ad; - u32 sid = task_sid_subj(target); + u32 sid = task_sid_obj(target); int rc; isec = selinux_ipc(msq); diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index cacbe7518519..21a0e7c3b8de 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -2016,7 +2016,7 @@ static int smk_curacc_on_task(struct task_struct *p, int access, const char *caller) { struct smk_audit_info ad; - struct smack_known *skp = smk_of_task_struct_subj(p); + struct smack_known *skp = smk_of_task_struct_obj(p); int rc; smk_ad_init(&ad, caller, LSM_AUDIT_DATA_TASK); @@ -3480,7 +3480,7 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode) */ static int smack_getprocattr(struct task_struct *p, char *name, char **value) { - struct smack_known *skp = smk_of_task_struct_subj(p); + struct smack_known *skp = smk_of_task_struct_obj(p); char *cp; int slen; -- cgit v1.2.3 From 1f828223b7991a228bc2aef837b78737946d44b2 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Wed, 22 Sep 2021 15:49:06 -0700 Subject: memcg: flush lruvec stats in the refault MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat") and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus * 32) at worst and for unbounded amount of time. The commit aa48e47e3906 moved the lruvec stats to rstat infrastructure and the commit 7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus * 32) at worst for at most 2 seconds. More specifically it decoupled the number of stats and the number of cgroups from the error rate. However this reduction in error comes with the cost of triggering the slowpath of stats update more frequently. Previously in the slowpath the kernel adds the stats up the memcg tree. After aa48e47e3906, the kernel triggers the asyn lruvec stats flush through queue_work(). This causes regression reports from 0day kernel bot [1] as well as from phoronix test suite [2]. We tried two options to fix the regression: 1) Increase the threshold to trigger the slowpath in lruvec stats update codepath from 32 to 512. 2) Remove the slowpath from lruvec stats update codepath and instead flush the stats in the page refault codepath. The assumption is that the kernel timely flush the stats, so, the update tree would be small in the refault codepath to not cause the preformance impact. Following are the results of will-it-scale/page_fault[1|2|3] benchmark on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1 (4) 5.15-rc1 with option-2. test (1) (2) (3) (4) pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%) pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%) pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%) From the above result, it seems like the option-2 not only solves the regression but also improves the performance for at least these benchmarks. Feng Tang (intel) ran the aim7 benchmark with these two options and confirms that option-1 reduces the regression but option-2 removes the regression. Michael Larabel (phoronix) ran multiple benchmarks with these options and reported the results at [3] and it shows for most benchmarks option-2 removes the regression introduced by the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"). Based on the experiment results, this patch proposed the option-2 as the solution to resolve the regression. Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1] Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2] Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3] Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats") Signed-off-by: Shakeel Butt Tested-by: Michael Larabel Cc: Johannes Weiner Cc: Roman Gushchin Cc: Feng Tang Cc: Michal Hocko Cc: Hillf Danton , Cc: Michal Koutný Cc: Andrew Morton , Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 10 ---------- mm/workingset.c | 1 + 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index b762215d73eb..6da5020a8656 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -106,9 +106,6 @@ static bool do_memsw_account(void) /* memcg and lruvec stats flushing */ static void flush_memcg_stats_dwork(struct work_struct *w); static DECLARE_DEFERRABLE_WORK(stats_flush_dwork, flush_memcg_stats_dwork); -static void flush_memcg_stats_work(struct work_struct *w); -static DECLARE_WORK(stats_flush_work, flush_memcg_stats_work); -static DEFINE_PER_CPU(unsigned int, stats_flush_threshold); static DEFINE_SPINLOCK(stats_flush_lock); #define THRESHOLDS_EVENTS_TARGET 128 @@ -682,8 +679,6 @@ void __mod_memcg_lruvec_state(struct lruvec *lruvec, enum node_stat_item idx, /* Update lruvec */ __this_cpu_add(pn->lruvec_stats_percpu->state[idx], val); - if (!(__this_cpu_inc_return(stats_flush_threshold) % MEMCG_CHARGE_BATCH)) - queue_work(system_unbound_wq, &stats_flush_work); } /** @@ -5361,11 +5356,6 @@ static void flush_memcg_stats_dwork(struct work_struct *w) queue_delayed_work(system_unbound_wq, &stats_flush_dwork, 2UL*HZ); } -static void flush_memcg_stats_work(struct work_struct *w) -{ - mem_cgroup_flush_stats(); -} - static void mem_cgroup_css_rstat_flush(struct cgroup_subsys_state *css, int cpu) { struct mem_cgroup *memcg = mem_cgroup_from_css(css); diff --git a/mm/workingset.c b/mm/workingset.c index d4268d8e9a82..d5b81e4f4cbe 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -352,6 +352,7 @@ void workingset_refault(struct page *page, void *shadow) inc_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file); + mem_cgroup_flush_stats(); /* * Compare the distance to the existing workingset size. We * don't activate pages that couldn't stay resident even if -- cgit v1.2.3 From 5501765a02a6c324f78581e6bb8209d054fe13ae Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:38 -0700 Subject: driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD If a parent device is also a supplier to a child device, fw_devlink=on by design delays the probe() of the child device until the probe() of the parent finishes successfully. However, some drivers of such parent devices (where parent is also a supplier) expect the child device to finish probing successfully as soon as they are added using device_add() and before the probe() of the parent device has completed successfully. One example of such a case is discussed in the link mentioned below. Add a flag to make fw_devlink=on not enforce these supplier-consumer relationships, so these drivers can continue working. Link: https://lore.kernel.org/netdev/CAGETcx_uj0V4DChME-gy5HGKTYnxLBX=TH2rag29f_p=UcG+Tg@mail.gmail.com/ Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""") Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 19 +++++++++++++++++++ include/linux/fwnode.h | 11 ++++++++--- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 316df6027093..21d4cb5d3767 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1722,6 +1722,25 @@ static int fw_devlink_create_devlink(struct device *con, struct device *sup_dev; int ret = 0; + /* + * In some cases, a device P might also be a supplier to its child node + * C. However, this would defer the probe of C until the probe of P + * completes successfully. This is perfectly fine in the device driver + * model. device_add() doesn't guarantee probe completion of the device + * by the time it returns. + * + * However, there are a few drivers that assume C will finish probing + * as soon as it's added and before P finishes probing. So, we provide + * a flag to let fw_devlink know not to delay the probe of C until the + * probe of P completes successfully. + * + * When such a flag is set, we can't create device links where P is the + * supplier of C as that would delay the probe of C. + */ + if (sup_handle->flags & FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD && + fwnode_is_ancestor_of(sup_handle, con->fwnode)) + return -EINVAL; + sup_dev = get_dev_from_fwnode(sup_handle); if (sup_dev) { /* diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 59828516ebaf..9f4ad719bfe3 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -22,10 +22,15 @@ struct device; * LINKS_ADDED: The fwnode has already be parsed to add fwnode links. * NOT_DEVICE: The fwnode will never be populated as a struct device. * INITIALIZED: The hardware corresponding to fwnode has been initialized. + * NEEDS_CHILD_BOUND_ON_ADD: For this fwnode/device to probe successfully, its + * driver needs its child devices to be bound with + * their respective drivers as soon as they are + * added. */ -#define FWNODE_FLAG_LINKS_ADDED BIT(0) -#define FWNODE_FLAG_NOT_DEVICE BIT(1) -#define FWNODE_FLAG_INITIALIZED BIT(2) +#define FWNODE_FLAG_LINKS_ADDED BIT(0) +#define FWNODE_FLAG_NOT_DEVICE BIT(1) +#define FWNODE_FLAG_INITIALIZED BIT(2) +#define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) struct fwnode_handle { struct fwnode_handle *secondary; -- cgit v1.2.3 From 04f41c68f18886aea5afc68be945e7195ea1d598 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:39 -0700 Subject: net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents There are many instances of PHYs that depend on a switch to supply a resource (Eg: interrupts). Switches also expects the PHYs to be probed by their specific drivers as soon as they are added. If that doesn't happen, then the switch would force the use of generic PHY drivers for the PHY even if the PHY might have specific driver available. fw_devlink=on by design can cause delayed probes of PHY. To avoid, this we need to set the FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for the switch's fwnode before the PHYs are added. The most generic way to do this is to set this flag for the parent of MDIO busses which is typically the switch. For more context: https://lore.kernel.org/lkml/YTll0i6Rz3WAAYzs@lunn.ch/#t Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""") Suggested-by: Andrew Lunn Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/phy/mdio_bus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 53f034fc2ef7..ee8313a4ac71 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -525,6 +525,10 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) NULL == bus->read || NULL == bus->write) return -EINVAL; + if (bus->parent && bus->parent->of_node) + bus->parent->of_node->fwnode.flags |= + FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD; + BUG_ON(bus->state != MDIOBUS_ALLOCATED && bus->state != MDIOBUS_UNREGISTERED); -- cgit v1.2.3 From 12064c1768439fa0882547010afae6b52aafa7af Mon Sep 17 00:00:00 2001 From: Jia He Date: Thu, 23 Sep 2021 11:35:57 +0800 Subject: Revert "ACPI: Add memory semantics to acpi_os_map_memory()" This reverts commit 437b38c51162f8b87beb28a833c4d5dc85fa864e. The memory semantics added in commit 437b38c51162 causes SystemMemory Operation region, whose address range is not described in the EFI memory map to be mapped as NormalNC memory on arm64 platforms (through acpi_os_map_memory() in acpi_ex_system_memory_space_handler()). This triggers the following abort on an ARM64 Ampere eMAG machine, because presumably the physical address range area backing the Opregion does not support NormalNC memory attributes driven on the bus. Internal error: synchronous external abort: 96000410 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+ #462 Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 0.14 02/22/2019 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [...snip...] Call trace: acpi_ex_system_memory_space_handler+0x26c/0x2c8 acpi_ev_address_space_dispatch+0x228/0x2c4 acpi_ex_access_region+0x114/0x268 acpi_ex_field_datum_io+0x128/0x1b8 acpi_ex_extract_from_field+0x14c/0x2ac acpi_ex_read_data_from_field+0x190/0x1b8 acpi_ex_resolve_node_to_value+0x1ec/0x288 acpi_ex_resolve_to_value+0x250/0x274 acpi_ds_evaluate_name_path+0xac/0x124 acpi_ds_exec_end_op+0x90/0x410 acpi_ps_parse_loop+0x4ac/0x5d8 acpi_ps_parse_aml+0xe0/0x2c8 acpi_ps_execute_method+0x19c/0x1ac acpi_ns_evaluate+0x1f8/0x26c acpi_ns_init_one_device+0x104/0x140 acpi_ns_walk_namespace+0x158/0x1d0 acpi_ns_initialize_devices+0x194/0x218 acpi_initialize_objects+0x48/0x50 acpi_init+0xe0/0x498 If the Opregion address range is not present in the EFI memory map there is no way for us to determine the memory attributes to use to map it - defaulting to NormalNC does not work (and it is not correct on a memory region that may have read side-effects) and therefore commit 437b38c51162 should be reverted, which means reverting back to the original behavior whereby address ranges that are mapped using acpi_os_map_memory() default to the safe devicenGnRnE attributes on ARM64 if the mapped address range is not defined in the EFI memory map. Fixes: 437b38c51162 ("ACPI: Add memory semantics to acpi_os_map_memory()") Signed-off-by: Jia He Acked-by: Lorenzo Pieralisi Acked-by: Catalin Marinas Signed-off-by: Rafael J. Wysocki --- arch/arm64/include/asm/acpi.h | 3 --- arch/arm64/kernel/acpi.c | 19 +++---------------- drivers/acpi/osl.c | 23 +++++++---------------- include/acpi/acpi_io.h | 8 -------- 4 files changed, 10 insertions(+), 43 deletions(-) diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 7535dc7cc5aa..bd68e1b7f29f 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -50,9 +50,6 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr); void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size); #define acpi_os_ioremap acpi_os_ioremap -void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size); -#define acpi_os_memmap acpi_os_memmap - typedef u64 phys_cpuid_t; #define PHYS_CPUID_INVALID INVALID_HWID diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 1c9c2f7a1c04..f3851724fe35 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -273,8 +273,7 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr) return __pgprot(PROT_DEVICE_nGnRnE); } -static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, - acpi_size size, bool memory) +void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) { efi_memory_desc_t *md, *region = NULL; pgprot_t prot; @@ -300,11 +299,9 @@ static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, * It is fine for AML to remap regions that are not represented in the * EFI memory map at all, as it only describes normal memory, and MMIO * regions that require a virtual mapping to make them accessible to - * the EFI runtime services. Determine the region default - * attributes by checking the requested memory semantics. + * the EFI runtime services. */ - prot = memory ? __pgprot(PROT_NORMAL_NC) : - __pgprot(PROT_DEVICE_nGnRnE); + prot = __pgprot(PROT_DEVICE_nGnRnE); if (region) { switch (region->type) { case EFI_LOADER_CODE: @@ -364,16 +361,6 @@ static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, return __ioremap(phys, size, prot); } -void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_ioremap(phys, size, false); -} - -void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_ioremap(phys, size, true); -} - /* * Claim Synchronous External Aborts as a firmware first notification. * diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index a43f1521efe6..45c5c0e45e33 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -284,8 +284,7 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size) #define should_use_kmap(pfn) page_is_ram(pfn) #endif -static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz, - bool memory) +static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz) { unsigned long pfn; @@ -295,8 +294,7 @@ static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz, return NULL; return (void __iomem __force *)kmap(pfn_to_page(pfn)); } else - return memory ? acpi_os_memmap(pg_off, pg_sz) : - acpi_os_ioremap(pg_off, pg_sz); + return acpi_os_ioremap(pg_off, pg_sz); } static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) @@ -311,10 +309,9 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) } /** - * __acpi_os_map_iomem - Get a virtual address for a given physical address range. + * acpi_os_map_iomem - Get a virtual address for a given physical address range. * @phys: Start of the physical address range to map. * @size: Size of the physical address range to map. - * @memory: true if remapping memory, false if IO * * Look up the given physical address range in the list of existing ACPI memory * mappings. If found, get a reference to it and return a pointer to it (its @@ -324,8 +321,8 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) * During early init (when acpi_permanent_mmap has not been set yet) this * routine simply calls __acpi_map_table() to get the job done. */ -static void __iomem __ref -*__acpi_os_map_iomem(acpi_physical_address phys, acpi_size size, bool memory) +void __iomem __ref +*acpi_os_map_iomem(acpi_physical_address phys, acpi_size size) { struct acpi_ioremap *map; void __iomem *virt; @@ -356,7 +353,7 @@ static void __iomem __ref pg_off = round_down(phys, PAGE_SIZE); pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off; - virt = acpi_map(phys, size, memory); + virt = acpi_map(phys, size); if (!virt) { mutex_unlock(&acpi_ioremap_lock); kfree(map); @@ -375,17 +372,11 @@ out: mutex_unlock(&acpi_ioremap_lock); return map->virt + (phys - map->phys); } - -void __iomem *__ref -acpi_os_map_iomem(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_map_iomem(phys, size, false); -} EXPORT_SYMBOL_GPL(acpi_os_map_iomem); void *__ref acpi_os_map_memory(acpi_physical_address phys, acpi_size size) { - return (void *)__acpi_os_map_iomem(phys, size, true); + return (void *)acpi_os_map_iomem(phys, size); } EXPORT_SYMBOL_GPL(acpi_os_map_memory); diff --git a/include/acpi/acpi_io.h b/include/acpi/acpi_io.h index a0212e67d6f4..027faa8883aa 100644 --- a/include/acpi/acpi_io.h +++ b/include/acpi/acpi_io.h @@ -14,14 +14,6 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys, } #endif -#ifndef acpi_os_memmap -static inline void __iomem *acpi_os_memmap(acpi_physical_address phys, - acpi_size size) -{ - return ioremap_cache(phys, size); -} -#endif - extern bool acpi_permanent_mmap; void __iomem __ref -- cgit v1.2.3 From 03ab9cb982b622239cc2542ce7617b98a9ea159e Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Sep 2021 13:14:15 +0100 Subject: cifs: Deal with some warnings from W=1 Deal with some warnings generated from make W=1: (1) Add/remove/fix kerneldoc parameters descriptions. (2) Turn cifs' rqst_page_get_length()'s banner comment into a kerneldoc comment. It should probably be prefixed with "cifs_" though. Signed-off-by: David Howells Signed-off-by: Steve French --- fs/cifs/misc.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 03da00eb7c04..f2916b51652a 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -590,6 +590,7 @@ void cifs_put_writer(struct cifsInodeInfo *cinode) /** * cifs_queue_oplock_break - queue the oplock break handler for cfile + * @cfile: The file to break the oplock on * * This function is called from the demultiplex thread when it * receives an oplock break for @cfile. @@ -1065,6 +1066,9 @@ setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw) /** * cifs_alloc_hash - allocate hash and hash context together + * @name: The name of the crypto hash algo + * @shash: Where to put the pointer to the hash algo + * @sdesc: Where to put the pointer to the hash descriptor * * The caller has to make sure @sdesc is initialized to either NULL or * a valid context. Both can be freed via cifs_free_hash(). @@ -1103,6 +1107,8 @@ cifs_alloc_hash(const char *name, /** * cifs_free_hash - free hash and hash context together + * @shash: Where to find the pointer to the hash algo + * @sdesc: Where to find the pointer to the hash descriptor * * Freeing a NULL hash or context is safe. */ @@ -1118,8 +1124,10 @@ cifs_free_hash(struct crypto_shash **shash, struct sdesc **sdesc) /** * rqst_page_get_length - obtain the length and offset for a page in smb_rqst - * Input: rqst - a smb_rqst, page - a page index for rqst - * Output: *len - the length for this page, *offset - the offset for this page + * @rqst: The request descriptor + * @page: The index of the page to query + * @len: Where to store the length for this page: + * @offset: Where to store the offset for this page */ void rqst_page_get_length(struct smb_rqst *rqst, unsigned int page, unsigned int *len, unsigned int *offset) @@ -1152,6 +1160,8 @@ void extract_unc_hostname(const char *unc, const char **h, size_t *len) /** * copy_path_name - copy src path to dst, possibly truncating + * @dst: The destination buffer + * @src: The source name * * returns number of bytes written (including trailing nul) */ -- cgit v1.2.3 From c48977f020d5846215e2ff7e8172e7b46b3d64b4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 14:16:00 +0200 Subject: drm/amd/display: fix empty debug macros Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_aux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c index e14f99b4b0c3..3c3347341103 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c @@ -42,7 +42,7 @@ #define DC_LOGGER \ engine->ctx->logger -#define DC_TRACE_LEVEL_MESSAGE(...) /* do nothing */ +#define DC_TRACE_LEVEL_MESSAGE(...) do { } while (0) #define IS_DC_I2CAUX_LOGGING_ENABLED() (false) #define LOG_FLAG_Error_I2cAux LOG_ERROR #define LOG_FLAG_I2cAux_DceAux LOG_I2C_AUX @@ -76,7 +76,7 @@ enum { #define DEFAULT_AUX_ENGINE_MULT 0 #define DEFAULT_AUX_ENGINE_LENGTH 69 -#define DC_TRACE_LEVEL_MESSAGE(...) /* do nothing */ +#define DC_TRACE_LEVEL_MESSAGE(...) do { } while (0) static void release_engine( struct dce_aux *engine) -- cgit v1.2.3 From 6de0653f7719bd0aa61f683fba16ae0e2c4ead64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Sep 2021 12:05:30 -0400 Subject: MAINTAINERS: fix up entry for AMD Powerplay Fix the path to cover both the older powerplay infrastructure and the newer SwSMU infrastructure. Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ca6d6fde85cf..556957c5aa5c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -977,12 +977,12 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/amd-pmc.* -AMD POWERPLAY +AMD POWERPLAY AND SWSMU M: Evan Quan L: amd-gfx@lists.freedesktop.org S: Supported T: git https://gitlab.freedesktop.org/agd5f/linux.git -F: drivers/gpu/drm/amd/pm/powerplay/ +F: drivers/gpu/drm/amd/pm/ AMD PTDMA DRIVER M: Sanjay R Mehta -- cgit v1.2.3 From 7beb26dcedaa977ece5be7c712a66b7b6c66fc2b Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Mon, 13 Sep 2021 10:03:36 -0400 Subject: drm/amdkfd: SVM map to gpus check vma boundary SVM range may includes multiple VMAs with different vm_flags, if prange page index is the last page of the VMA offset + npages, update GPU mapping to create GPU page table with same VMA access permission. Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 9fc8021bb0ab..432d5aae0962 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -1178,7 +1178,11 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, for (i = offset; i < offset + npages; i++) { last_domain = dma_addr[i] & SVM_RANGE_VRAM_DOMAIN; dma_addr[i] &= ~SVM_RANGE_VRAM_DOMAIN; - if ((prange->start + i) < prange->last && + + /* Collect all pages in the same address range and memory domain + * that can be mapped with a single call to update mapping. + */ + if (i < offset + npages - 1 && last_domain == (dma_addr[i + 1] & SVM_RANGE_VRAM_DOMAIN)) continue; -- cgit v1.2.3 From f63251184a81039ebc805306505838c2a073e51a Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Tue, 14 Sep 2021 16:33:40 -0400 Subject: drm/amdkfd: fix dma mapping leaking warning For xnack off, restore work dma unmap previous system memory page, and dma map the updated system memory page to update GPU mapping, this is not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking. prange->dma_addr store the VRAM page pfn after the range migrated to VRAM, should not dma unmap VRAM page when updating GPU mapping or remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM page and error cases. Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again immediately after. This flag is used to know the type of page later to dma unmapping system memory page. Fixes: 1d5dbfe6c06a ("drm/amdkfd: classify and map mixed svm range pages in GPU") Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 432d5aae0962..9d0f65a90002 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -118,6 +118,13 @@ static void svm_range_remove_notifier(struct svm_range *prange) mmu_interval_notifier_remove(&prange->notifier); } +static bool +svm_is_valid_dma_mapping_addr(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr && !dma_mapping_error(dev, dma_addr) && + !(dma_addr & SVM_RANGE_VRAM_DOMAIN); +} + static int svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange, unsigned long offset, unsigned long npages, @@ -139,8 +146,7 @@ svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange, addr += offset; for (i = 0; i < npages; i++) { - if (WARN_ONCE(addr[i] && !dma_mapping_error(dev, addr[i]), - "leaking dma mapping\n")) + if (svm_is_valid_dma_mapping_addr(dev, addr[i])) dma_unmap_page(dev, addr[i], PAGE_SIZE, dir); page = hmm_pfn_to_page(hmm_pfns[i]); @@ -209,7 +215,7 @@ void svm_range_dma_unmap(struct device *dev, dma_addr_t *dma_addr, return; for (i = offset; i < offset + npages; i++) { - if (!dma_addr[i] || dma_mapping_error(dev, dma_addr[i])) + if (!svm_is_valid_dma_mapping_addr(dev, dma_addr[i])) continue; pr_debug("dma unmapping 0x%llx\n", dma_addr[i] >> PAGE_SHIFT); dma_unmap_page(dev, dma_addr[i], PAGE_SIZE, dir); @@ -1165,7 +1171,7 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, unsigned long last_start; int last_domain; int r = 0; - int64_t i; + int64_t i, j; last_start = prange->start + offset; @@ -1205,6 +1211,10 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, NULL, dma_addr, &vm->last_update, &table_freed); + + for (j = last_start - prange->start; j <= i; j++) + dma_addr[j] |= last_domain; + if (r) { pr_debug("failed %d to map to gpu 0x%lx\n", r, prange->start); goto out; -- cgit v1.2.3 From 305d568b72f17f674155a2a8275f865f207b3808 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 16 Sep 2021 15:34:46 -0300 Subject: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path. Link: https://lore.kernel.org/r/0-v1-3bc675b8006d+22-syz_cancel_uaf_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: e51060f08a61 ("IB: IP address based RDMA connection manager") Reported-by: syzbot+dc3dfba010d7671e05f5@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 23 +++++++++++++++++++++++ drivers/infiniband/core/cma_priv.h | 1 + 2 files changed, 24 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 8862b0e572f0..704ce595542c 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1783,6 +1783,14 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv, { switch (state) { case RDMA_CM_ADDR_QUERY: + /* + * We can avoid doing the rdma_addr_cancel() based on state, + * only RDMA_CM_ADDR_QUERY has a work that could still execute. + * Notice that the addr_handler work could still be exiting + * outside this state, however due to the interaction with the + * handler_mutex the work is guaranteed not to touch id_priv + * during exit. + */ rdma_addr_cancel(&id_priv->id.route.addr.dev_addr); break; case RDMA_CM_ROUTE_QUERY: @@ -3425,6 +3433,21 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, if (dst_addr->sa_family == AF_IB) { ret = cma_resolve_ib_addr(id_priv); } else { + /* + * The FSM can return back to RDMA_CM_ADDR_BOUND after + * rdma_resolve_ip() is called, eg through the error + * path in addr_handler(). If this happens the existing + * request must be canceled before issuing a new one. + * Since canceling a request is a bit slow and this + * oddball path is rare, keep track once a request has + * been issued. The track turns out to be a permanent + * state since this is the only cancel as it is + * immediately before rdma_resolve_ip(). + */ + if (id_priv->used_resolve_ip) + rdma_addr_cancel(&id->route.addr.dev_addr); + else + id_priv->used_resolve_ip = 1; ret = rdma_resolve_ip(cma_src_addr(id_priv), dst_addr, &id->route.addr.dev_addr, timeout_ms, addr_handler, diff --git a/drivers/infiniband/core/cma_priv.h b/drivers/infiniband/core/cma_priv.h index 5c463da99845..f92f101ea981 100644 --- a/drivers/infiniband/core/cma_priv.h +++ b/drivers/infiniband/core/cma_priv.h @@ -91,6 +91,7 @@ struct rdma_id_private { u8 afonly; u8 timeout; u8 min_rnr_timer; + u8 used_resolve_ip; enum ib_gid_type gid_type; /* -- cgit v1.2.3 From 8bd8d1dff9eb90255c030d2e52a4f65a7fef33a9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 22:26:31 +0100 Subject: vfio/pci: add missing identifier name in argument of function prototype The function prototype is missing an identifier name. Add one. Signed-off-by: Colin Ian King Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20210902212631.54260-1-colin.king@canonical.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index 68198e0f2a63..a03b5a99c2da 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -565,7 +565,7 @@ static bool vfio_pci_dev_below_slot(struct pci_dev *pdev, struct pci_slot *slot) } struct vfio_pci_walk_info { - int (*fn)(struct pci_dev *, void *data); + int (*fn)(struct pci_dev *pdev, void *data); void *data; struct pci_dev *pdev; bool slot; -- cgit v1.2.3 From ab39d3cef526ba09c4c6923b4cd7e6ec1c5d4faa Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 23 Sep 2021 11:58:43 +0800 Subject: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/powerplay/si_dpm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c index bdbbeb959c68..81f82aa05ec2 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c +++ b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c @@ -6867,6 +6867,8 @@ static int si_dpm_enable(struct amdgpu_device *adev) si_enable_auto_throttle_source(adev, AMDGPU_DPM_AUTO_THROTTLE_SRC_THERMAL, true); si_thermal_start_thermal_controller(adev); + ni_update_current_ps(adev, boot_ps); + return 0; } -- cgit v1.2.3 From 7d6687200a939176847090bbde5cb79a82792a2f Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Fri, 17 Sep 2021 14:32:14 -0400 Subject: drm/amdkfd: handle svm migrate init error If svm migration init failed to create pgmap for device memory, set pgmap type to 0 to disable device SVM support capability. Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index dab290a4d19d..165e0ebb619d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -894,6 +894,9 @@ int svm_migrate_init(struct amdgpu_device *adev) r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); + + /* Disable SVM support capability */ + pgmap->type = 0; devm_release_mem_region(adev->dev, res->start, res->end - res->start + 1); return PTR_ERR(r); -- cgit v1.2.3 From 197ae17722e989942b36e33e044787877f158574 Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Mon, 20 Sep 2021 17:25:52 -0400 Subject: drm/amdkfd: fix svm_migrate_fini warning Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu] Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 - drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 13 ++++--------- drivers/gpu/drm/amd/amdkfd/kfd_migrate.h | 5 ----- 3 files changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 98d1b3ab3a46..c2a4d920da40 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -971,7 +971,6 @@ out: void kgd2kfd_device_exit(struct kfd_dev *kfd) { if (kfd->init_complete) { - svm_migrate_fini((struct amdgpu_device *)kfd->kgd); device_queue_manager_uninit(kfd->dqm); kfd_interrupt_exit(kfd); kfd_topology_remove_device(kfd); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index 165e0ebb619d..4a16e3c257b9 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -891,6 +891,10 @@ int svm_migrate_init(struct amdgpu_device *adev) pgmap->ops = &svm_migrate_pgmap_ops; pgmap->owner = SVM_ADEV_PGMAP_OWNER(adev); pgmap->flags = MIGRATE_VMA_SELECT_DEVICE_PRIVATE; + + /* Device manager releases device-specific resources, memory region and + * pgmap when driver disconnects from device. + */ r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); @@ -911,12 +915,3 @@ int svm_migrate_init(struct amdgpu_device *adev) return 0; } - -void svm_migrate_fini(struct amdgpu_device *adev) -{ - struct dev_pagemap *pgmap = &adev->kfd.dev->pgmap; - - devm_memunmap_pages(adev->dev, pgmap); - devm_release_mem_region(adev->dev, pgmap->range.start, - pgmap->range.end - pgmap->range.start + 1); -} diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h index 0de76b5d4973..2f5b3394c9ed 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h @@ -47,7 +47,6 @@ unsigned long svm_migrate_addr_to_pfn(struct amdgpu_device *adev, unsigned long addr); int svm_migrate_init(struct amdgpu_device *adev); -void svm_migrate_fini(struct amdgpu_device *adev); #else @@ -55,10 +54,6 @@ static inline int svm_migrate_init(struct amdgpu_device *adev) { return 0; } -static inline void svm_migrate_fini(struct amdgpu_device *adev) -{ - /* empty */ -} #endif /* IS_ENABLED(CONFIG_HSA_AMD_SVM) */ -- cgit v1.2.3 From 28406a21999152ff7faa30b194f734565bdd8e0d Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 23 Sep 2021 15:01:27 +0530 Subject: pinctrl: qcom: sc7280: Add PM suspend callbacks Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sc7280.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c index afddf6d60dbe..9017ede409c9 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c @@ -1496,6 +1496,7 @@ static const struct of_device_id sc7280_pinctrl_of_match[] = { static struct platform_driver sc7280_pinctrl_driver = { .driver = { .name = "sc7280-pinctrl", + .pm = &msm_pinctrl_dev_pm_ops, .of_match_table = sc7280_pinctrl_of_match, }, .probe = sc7280_pinctrl_probe, -- cgit v1.2.3 From 4f22262280ccb5c0a18a42029313938aabfaff12 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 12:42:35 -0500 Subject: cifs: Clear modified attribute bit from inode flags Clear CIFS_INO_MODIFIED_ATTR bit from inode flags after updating mtime and ctime Signed-off-by: Rohith Surabattula Reviewed-by: Paulo Alcantara (SUSE) Acked-by: Ronnie Sahlberg Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Steve French --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0ab5bb24b8ca..13f3182cf796 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -884,7 +884,7 @@ int cifs_close(struct inode *inode, struct file *file) cinode->lease_granted && !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) && dclose) { - if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { + if (test_and_clear_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { inode->i_ctime = inode->i_mtime = current_time(inode); cifs_fscache_update_inode_cookie(inode); } -- cgit v1.2.3 From b06d893ef2492245d0319b4136edb4c346b687a3 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 16:00:31 -0500 Subject: smb3: correct smb3 ACL security descriptor Address warning: fs/smbfs_client/smb2pdu.c:2425 create_sd_buf() warn: struct type mismatch 'smb3_acl vs cifs_acl' Pointed out by Dan Carpenter via smatch code analysis tool Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 672ae78e866a..7829c590eeac 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2397,7 +2397,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) buf->sd.OffsetDacl = cpu_to_le32(ptr - (__u8 *)&buf->sd); /* Ship the ACL for now. we will copy it into buf later. */ aclptr = ptr; - ptr += sizeof(struct cifs_acl); + ptr += sizeof(struct smb3_acl); /* create one ACE to hold the mode embedded in reserved special SID */ acelen = setup_special_mode_ACE((struct cifs_ace *)ptr, (__u64)mode); @@ -2422,7 +2422,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) acl.AclRevision = ACL_REVISION; /* See 2.4.4.1 of MS-DTYP */ acl.AclSize = cpu_to_le16(acl_size); acl.AceCount = cpu_to_le16(ace_count); - memcpy(aclptr, &acl, sizeof(struct cifs_acl)); + memcpy(aclptr, &acl, sizeof(struct smb3_acl)); buf->ccontext.DataLength = cpu_to_le32(ptr - (__u8 *)&buf->sd); *len = roundup(ptr - (__u8 *)buf, 8); -- cgit v1.2.3 From 1db1aa98871defd9316d13f59708f2277c4f9232 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 18:52:40 -0500 Subject: smb3: correct server pointer dereferencing check to be more consistent Address warning: fs/smbfs_client/misc.c:273 header_assemble() warn: variable dereferenced before check 'treeCon->ses->server' Pointed out by Dan Carpenter via smatch code analysis tool Although the check is likely unneeded, adding it makes the code more consistent and easier to read, as the same check is done elsewhere in the function. Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/misc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index f2916b51652a..bb1185fff8cc 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -264,7 +264,8 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , /* Uid is not converted */ buffer->Uid = treeCon->ses->Suid; - buffer->Mid = get_next_mid(treeCon->ses->server); + if (treeCon->ses->server) + buffer->Mid = get_next_mid(treeCon->ses->server); } if (treeCon->Flags & SMB_SHARE_IS_IN_DFS) buffer->Flags2 |= SMBFLG2_DFS; -- cgit v1.2.3 From 9ed38fd4a15417cac83967360cf20b853bfab9b6 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 19:18:37 -0500 Subject: cifs: fix incorrect check for null pointer in header_assemble Although very unlikely that the tlink pointer would be null in this case, get_next_mid function can in theory return null (but not an error) so need to check for null (not for IS_ERR, which can not be returned here). Address warning: fs/smbfs_client/connect.c:2392 cifs_match_super() warn: 'tlink' isn't an ERR_PTR Pointed out by Dan Carpenter via smatch code analysis tool CC: stable@vger.kernel.org Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/connect.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7881115cfbee..c3b94c1e4591 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2389,9 +2389,10 @@ cifs_match_super(struct super_block *sb, void *data) spin_lock(&cifs_tcp_ses_lock); cifs_sb = CIFS_SB(sb); tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb)); - if (IS_ERR(tlink)) { + if (tlink == NULL) { + /* can not match superblock if tlink were ever null */ spin_unlock(&cifs_tcp_ses_lock); - return rc; + return 0; } tcon = tlink_tcon(tlink); ses = tcon->ses; -- cgit v1.2.3 From fbf094ce524113c694acabf3d385883f88372829 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Thu, 23 Sep 2021 22:00:33 +0000 Subject: selftests: KVM: Call ucall_init when setting up in rseq_test While x86 does not require any additional setup to use the ucall infrastructure, arm64 needs to set up the MMIO address used to signal a ucall to userspace. rseq_test does not initialize the MMIO address, resulting in the test spinning indefinitely. Fix the issue by calling ucall_init() during setup. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Oliver Upton Message-Id: <20210923220033.4172362-1-oupton@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/rseq_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 060538bd405a..c5e0dd664a7b 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -180,6 +180,7 @@ int main(int argc, char *argv[]) * CPU affinity. */ vm = vm_create_default(VCPU_ID, 0, guest_code); + ucall_init(vm, NULL); pthread_create(&migration_thread, NULL, migration_worker, 0); -- cgit v1.2.3 From 386ca9d7fd189b641bc5a82871e38dea9f67af85 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Fri, 24 Sep 2021 00:51:47 +0000 Subject: selftests: KVM: Explicitly use movq to read xmm registers Compiling the KVM selftests with clang emits the following warning: >> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized] >> return (unsigned long)xmm0; where xmm0 is accessed via an uninitialized register variable. Indeed, this is a misuse of register variables, which really should only be used for specifying register constraints on variables passed to inline assembly. Rather than attempting to read xmm registers via register variables, just explicitly perform the movq from the desired xmm register. Fixes: 783e9e51266e ("kvm: selftests: add API testing infrastructure") Signed-off-by: Oliver Upton Message-Id: <20210924005147.1122357-1-oupton@google.com> Reviewed-by: Ricardo Koller Signed-off-by: Paolo Bonzini --- .../selftests/kvm/include/x86_64/processor.h | 34 +++++++++++----------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index 242ae8e09a65..eba8bd08293e 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -312,37 +312,37 @@ static inline void set_xmm(int n, unsigned long val) } } -typedef unsigned long v1di __attribute__ ((vector_size (8))); +#define GET_XMM(__xmm) \ +({ \ + unsigned long __val; \ + asm volatile("movq %%"#__xmm", %0" : "=r"(__val) : : #__xmm); \ + __val; \ +}) + static inline unsigned long get_xmm(int n) { assert(n >= 0 && n <= 7); - register v1di xmm0 __asm__("%xmm0"); - register v1di xmm1 __asm__("%xmm1"); - register v1di xmm2 __asm__("%xmm2"); - register v1di xmm3 __asm__("%xmm3"); - register v1di xmm4 __asm__("%xmm4"); - register v1di xmm5 __asm__("%xmm5"); - register v1di xmm6 __asm__("%xmm6"); - register v1di xmm7 __asm__("%xmm7"); switch (n) { case 0: - return (unsigned long)xmm0; + return GET_XMM(xmm0); case 1: - return (unsigned long)xmm1; + return GET_XMM(xmm1); case 2: - return (unsigned long)xmm2; + return GET_XMM(xmm2); case 3: - return (unsigned long)xmm3; + return GET_XMM(xmm3); case 4: - return (unsigned long)xmm4; + return GET_XMM(xmm4); case 5: - return (unsigned long)xmm5; + return GET_XMM(xmm5); case 6: - return (unsigned long)xmm6; + return GET_XMM(xmm6); case 7: - return (unsigned long)xmm7; + return GET_XMM(xmm7); } + + /* never reached */ return 0; } -- cgit v1.2.3 From 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c Mon Sep 17 00:00:00 2001 From: Uwe Brandt Date: Tue, 21 Sep 2021 19:54:46 +0200 Subject: USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fd51498ab108..189279869a8b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -233,6 +233,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ -- cgit v1.2.3 From 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Fri, 17 Sep 2021 19:01:06 +0800 Subject: USB: serial: option: add device id for Foxconn T99W265 Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 02a35f26ee82..6cfb5d33609f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2075,6 +2075,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ -- cgit v1.2.3 From 505d9dcb0f7ddf9d075e729523a33d38642ae680 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 Aug 2021 16:04:27 +0300 Subject: crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are three bugs in this code: 1) If we ccp_init_data() fails for &src then we need to free aad. Use goto e_aad instead of goto e_ctx. 2) The label to free the &final_wa was named incorrectly as "e_tag" but it should have been "e_final_wa". One error path leaked &final_wa. 3) The &tag was leaked on one error path. In that case, I added a free before the goto because the resource was local to that block. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" Signed-off-by: Dan Carpenter Reviewed-by: John Allen Tested-by: John Allen Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-ops.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index bb88198c874e..aa4e1a500691 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -778,7 +778,7 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); if (ret) - goto e_ctx; + goto e_aad; if (in_place) { dst = src; @@ -863,7 +863,7 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) op.u.aes.size = 0; ret = cmd_q->ccp->vdata->perform->aes(&op); if (ret) - goto e_dst; + goto e_final_wa; if (aes->action == CCP_AES_ACTION_ENCRYPT) { /* Put the ciphered tag after the ciphertext. */ @@ -873,17 +873,19 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) ret = ccp_init_dm_workarea(&tag, cmd_q, authsize, DMA_BIDIRECTIONAL); if (ret) - goto e_tag; + goto e_final_wa; ret = ccp_set_dm_area(&tag, 0, p_tag, 0, authsize); - if (ret) - goto e_tag; + if (ret) { + ccp_dm_free(&tag); + goto e_final_wa; + } ret = crypto_memneq(tag.address, final_wa.address, authsize) ? -EBADMSG : 0; ccp_dm_free(&tag); } -e_tag: +e_final_wa: ccp_dm_free(&final_wa); e_dst: -- cgit v1.2.3 From 0e14ef38669ce4faa80589247fe8ed8a3780f414 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Tue, 21 Sep 2021 22:40:26 -0700 Subject: crypto: x86/sm4 - Fix frame pointer stack corruption sm4_aesni_avx_crypt8() sets up the frame pointer (which includes pushing RBP) before doing a conditional sibling call to sm4_aesni_avx_crypt4(), which sets up an additional frame pointer. Things will not go well when sm4_aesni_avx_crypt4() pops only the innermost single frame pointer and then tries to return to the outermost frame pointer. Sibling calls need to occur with an empty stack frame. Do the conditional sibling call *before* setting up the stack pointer. This fixes the following warning: arch/x86/crypto/sm4-aesni-avx-asm_64.o: warning: objtool: sm4_aesni_avx_crypt8()+0x8: sibling call from callable instruction with modified stack frame Fixes: a7ee22ee1445 ("crypto: x86/sm4 - add AES-NI/AVX/x86_64 implementation") Reported-by: kernel test robot Reported-by: Arnd Bergmann Acked-by: Peter Zijlstra (Intel) Reviewed-by: Tianjia Zhang Signed-off-by: Josh Poimboeuf Signed-off-by: Herbert Xu --- arch/x86/crypto/sm4-aesni-avx-asm_64.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/sm4-aesni-avx-asm_64.S b/arch/x86/crypto/sm4-aesni-avx-asm_64.S index fa2c3f50aecb..18d2f5199194 100644 --- a/arch/x86/crypto/sm4-aesni-avx-asm_64.S +++ b/arch/x86/crypto/sm4-aesni-avx-asm_64.S @@ -367,10 +367,11 @@ SYM_FUNC_START(sm4_aesni_avx_crypt8) * %rdx: src (1..8 blocks) * %rcx: num blocks (1..8) */ - FRAME_BEGIN - cmpq $5, %rcx; jb sm4_aesni_avx_crypt4; + + FRAME_BEGIN + vmovdqu (0 * 16)(%rdx), RA0; vmovdqu (1 * 16)(%rdx), RA1; vmovdqu (2 * 16)(%rdx), RA2; -- cgit v1.2.3 From 41608b64b10b80fe00dd253cd8326ec8ad85930f Mon Sep 17 00:00:00 2001 From: Long Li Date: Mon, 30 Aug 2021 16:13:27 -0700 Subject: PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In hv_pci_bus_exit, the code is holding a spinlock while calling pci_destroy_slot(), which takes a mutex. This is not safe for spinlock. Fix this by moving the children to be deleted to a list on the stack, and removing them after spinlock is released. Fixes: 94d22763207a ("PCI: hv: Fix a race condition when removing the device") Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Stephen Hemminger Cc: Wei Liu Cc: Dexuan Cui Cc: Lorenzo Pieralisi Cc: Rob Herring Cc: "Krzysztof Wilczyński" Cc: Bjorn Helgaas Cc: Michael Kelley Reported-by: Dan Carpenter Link: https://lore.kernel.org/linux-hyperv/20210823152130.GA21501@kili/ Signed-off-by: Long Li Reviewed-by: Wei Liu Link: https://lore.kernel.org/r/1630365207-20616-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu --- drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index a53bd8728d0d..fc1a29acadbb 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -3229,9 +3229,17 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs) return 0; if (!keep_devs) { - /* Delete any children which might still exist. */ + struct list_head removed; + + /* Move all present children to the list on stack */ + INIT_LIST_HEAD(&removed); spin_lock_irqsave(&hbus->device_list_lock, flags); - list_for_each_entry_safe(hpdev, tmp, &hbus->children, list_entry) { + list_for_each_entry_safe(hpdev, tmp, &hbus->children, list_entry) + list_move_tail(&hpdev->list_entry, &removed); + spin_unlock_irqrestore(&hbus->device_list_lock, flags); + + /* Remove all children in the list */ + list_for_each_entry_safe(hpdev, tmp, &removed, list_entry) { list_del(&hpdev->list_entry); if (hpdev->pci_slot) pci_destroy_slot(hpdev->pci_slot); @@ -3239,7 +3247,6 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs) put_pcichild(hpdev); put_pcichild(hpdev); } - spin_unlock_irqrestore(&hbus->device_list_lock, flags); } ret = hv_send_resources_released(hdev); -- cgit v1.2.3 From f7e745f8e94492a8ac0b0a26e25f2b19d342918f Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 23 Sep 2021 00:05:04 -0400 Subject: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize") Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/input.c b/net/sctp/input.c index 5ef86fdb1176..1f1786021d9c 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -702,7 +702,7 @@ static int sctp_rcv_ootb(struct sk_buff *skb) ch = skb_header_pointer(skb, offset, sizeof(*ch), &_ch); /* Break out if chunk length is less then minimal. */ - if (ntohs(ch->length) < sizeof(_ch)) + if (!ch || ntohs(ch->length) < sizeof(_ch)) break; ch_end = offset + SCTP_PAD4(ntohs(ch->length)); -- cgit v1.2.3 From ea1300b9df7c8e8b65695a08b8f6aaf4b25fec9c Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 23 Sep 2021 17:04:11 -0700 Subject: mptcp: don't return sockets in foreign netns mptcp_token_get_sock() may return a mptcp socket that is in a different net namespace than the socket that received the token value. The mptcp syncookie code path had an explicit check for this, this moves the test into mptcp_token_get_sock() function. Eventually token.c should be converted to pernet storage, but such change is not suitable for net tree. Fixes: 2c5ebd001d4f0 ("mptcp: refactor token container") Signed-off-by: Florian Westphal Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/mptcp_diag.c | 2 +- net/mptcp/protocol.h | 2 +- net/mptcp/subflow.c | 2 +- net/mptcp/syncookies.c | 13 +------------ net/mptcp/token.c | 11 ++++++++--- net/mptcp/token_test.c | 14 ++++++++------ 6 files changed, 20 insertions(+), 24 deletions(-) diff --git a/net/mptcp/mptcp_diag.c b/net/mptcp/mptcp_diag.c index f48eb6315bbb..292374fb0779 100644 --- a/net/mptcp/mptcp_diag.c +++ b/net/mptcp/mptcp_diag.c @@ -36,7 +36,7 @@ static int mptcp_diag_dump_one(struct netlink_callback *cb, struct sock *sk; net = sock_net(in_skb->sk); - msk = mptcp_token_get_sock(req->id.idiag_cookie[0]); + msk = mptcp_token_get_sock(net, req->id.idiag_cookie[0]); if (!msk) goto out_nosk; diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index d3e6fd1615f1..dc984676c5eb 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -709,7 +709,7 @@ int mptcp_token_new_connect(struct sock *sk); void mptcp_token_accept(struct mptcp_subflow_request_sock *r, struct mptcp_sock *msk); bool mptcp_token_exists(u32 token); -struct mptcp_sock *mptcp_token_get_sock(u32 token); +struct mptcp_sock *mptcp_token_get_sock(struct net *net, u32 token); struct mptcp_sock *mptcp_token_iter_next(const struct net *net, long *s_slot, long *s_num); void mptcp_token_destroy(struct mptcp_sock *msk); diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 1de7ce883c37..6172f380dfb7 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -86,7 +86,7 @@ static struct mptcp_sock *subflow_token_join_request(struct request_sock *req) struct mptcp_sock *msk; int local_id; - msk = mptcp_token_get_sock(subflow_req->token); + msk = mptcp_token_get_sock(sock_net(req_to_sk(req)), subflow_req->token); if (!msk) { SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINNOTOKEN); return NULL; diff --git a/net/mptcp/syncookies.c b/net/mptcp/syncookies.c index 37127781aee9..7f22526346a7 100644 --- a/net/mptcp/syncookies.c +++ b/net/mptcp/syncookies.c @@ -108,18 +108,12 @@ bool mptcp_token_join_cookie_init_state(struct mptcp_subflow_request_sock *subfl e->valid = 0; - msk = mptcp_token_get_sock(e->token); + msk = mptcp_token_get_sock(net, e->token); if (!msk) { spin_unlock_bh(&join_entry_locks[i]); return false; } - /* If this fails, the token got re-used in the mean time by another - * mptcp socket in a different netns, i.e. entry is outdated. - */ - if (!net_eq(sock_net((struct sock *)msk), net)) - goto err_put; - subflow_req->remote_nonce = e->remote_nonce; subflow_req->local_nonce = e->local_nonce; subflow_req->backup = e->backup; @@ -128,11 +122,6 @@ bool mptcp_token_join_cookie_init_state(struct mptcp_subflow_request_sock *subfl subflow_req->msk = msk; spin_unlock_bh(&join_entry_locks[i]); return true; - -err_put: - spin_unlock_bh(&join_entry_locks[i]); - sock_put((struct sock *)msk); - return false; } void __init mptcp_join_cookie_init(void) diff --git a/net/mptcp/token.c b/net/mptcp/token.c index a98e554b034f..e581b341c5be 100644 --- a/net/mptcp/token.c +++ b/net/mptcp/token.c @@ -231,6 +231,7 @@ found: /** * mptcp_token_get_sock - retrieve mptcp connection sock using its token + * @net: restrict to this namespace * @token: token of the mptcp connection to retrieve * * This function returns the mptcp connection structure with the given token. @@ -238,7 +239,7 @@ found: * * returns NULL if no connection with the given token value exists. */ -struct mptcp_sock *mptcp_token_get_sock(u32 token) +struct mptcp_sock *mptcp_token_get_sock(struct net *net, u32 token) { struct hlist_nulls_node *pos; struct token_bucket *bucket; @@ -251,11 +252,15 @@ struct mptcp_sock *mptcp_token_get_sock(u32 token) again: sk_nulls_for_each_rcu(sk, pos, &bucket->msk_chain) { msk = mptcp_sk(sk); - if (READ_ONCE(msk->token) != token) + if (READ_ONCE(msk->token) != token || + !net_eq(sock_net(sk), net)) continue; + if (!refcount_inc_not_zero(&sk->sk_refcnt)) goto not_found; - if (READ_ONCE(msk->token) != token) { + + if (READ_ONCE(msk->token) != token || + !net_eq(sock_net(sk), net)) { sock_put(sk); goto again; } diff --git a/net/mptcp/token_test.c b/net/mptcp/token_test.c index e1bd6f0a0676..5d984bec1cd8 100644 --- a/net/mptcp/token_test.c +++ b/net/mptcp/token_test.c @@ -11,6 +11,7 @@ static struct mptcp_subflow_request_sock *build_req_sock(struct kunit *test) GFP_USER); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, req); mptcp_token_init_request((struct request_sock *)req); + sock_net_set((struct sock *)req, &init_net); return req; } @@ -22,7 +23,7 @@ static void mptcp_token_test_req_basic(struct kunit *test) KUNIT_ASSERT_EQ(test, 0, mptcp_token_new_request((struct request_sock *)req)); KUNIT_EXPECT_NE(test, 0, (int)req->token); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(req->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, req->token)); /* cleanup */ mptcp_token_destroy_request((struct request_sock *)req); @@ -55,6 +56,7 @@ static struct mptcp_sock *build_msk(struct kunit *test) msk = kunit_kzalloc(test, sizeof(struct mptcp_sock), GFP_USER); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, msk); refcount_set(&((struct sock *)msk)->sk_refcnt, 1); + sock_net_set((struct sock *)msk, &init_net); return msk; } @@ -74,11 +76,11 @@ static void mptcp_token_test_msk_basic(struct kunit *test) mptcp_token_new_connect((struct sock *)icsk)); KUNIT_EXPECT_NE(test, 0, (int)ctx->token); KUNIT_EXPECT_EQ(test, ctx->token, msk->token); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(ctx->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, ctx->token)); KUNIT_EXPECT_EQ(test, 2, (int)refcount_read(&sk->sk_refcnt)); mptcp_token_destroy(msk); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(ctx->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, ctx->token)); } static void mptcp_token_test_accept(struct kunit *test) @@ -90,11 +92,11 @@ static void mptcp_token_test_accept(struct kunit *test) mptcp_token_new_request((struct request_sock *)req)); msk->token = req->token; mptcp_token_accept(req, msk); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, msk->token)); /* this is now a no-op */ mptcp_token_destroy_request((struct request_sock *)req); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, msk->token)); /* cleanup */ mptcp_token_destroy(msk); @@ -116,7 +118,7 @@ static void mptcp_token_test_destroyed(struct kunit *test) /* simulate race on removal */ refcount_set(&sk->sk_refcnt, 0); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, msk->token)); /* cleanup */ mptcp_token_destroy(msk); -- cgit v1.2.3 From 3f4a08909e2c740f8045efc74c4cf82eeaae3e36 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Thu, 23 Sep 2021 17:04:12 -0700 Subject: mptcp: allow changing the 'backup' bit when no sockets are open current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e. using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that matches the endpoint address. There is no reason for that, so we can just ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints can reconfigure their 'backup' flag even if no MPTCP sockets are open (or more generally, in case the MP_PRIO message is not sent out). Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink") Signed-off-by: Davide Caratti Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/pm_netlink.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index c4f9a5ce3815..050eea231528 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1718,9 +1718,7 @@ static int mptcp_nl_cmd_set_flags(struct sk_buff *skb, struct genl_info *info) list_for_each_entry(entry, &pernet->local_addr_list, list) { if (addresses_equal(&entry->addr, &addr.addr, true)) { - ret = mptcp_nl_addr_backup(net, &entry->addr, bkup); - if (ret) - return ret; + mptcp_nl_addr_backup(net, &entry->addr, bkup); if (bkup) entry->flags |= MPTCP_PM_ADDR_FLAG_BACKUP; -- cgit v1.2.3 From 5ba1071f7554c4027bdbd712a146111de57918de Mon Sep 17 00:00:00 2001 From: Numfor Mbiziwo-Tiapo Date: Thu, 23 Sep 2021 09:18:43 -0700 Subject: x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as these are forms of undefined behavior: "A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined." (from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf) These problems were identified using the undefined behavior sanitizer (ubsan) with the tools version of the code and perf test. [ bp: Massage commit message. ] Signed-off-by: Numfor Mbiziwo-Tiapo Signed-off-by: Ian Rogers Signed-off-by: Borislav Petkov Acked-by: Masami Hiramatsu Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com --- arch/x86/lib/insn.c | 4 ++-- tools/arch/x86/lib/insn.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 058f19b20465..c565def611e2 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr) #define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) #define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); }) #define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) diff --git a/tools/arch/x86/lib/insn.c b/tools/arch/x86/lib/insn.c index c41f95815480..797699462cd8 100644 --- a/tools/arch/x86/lib/insn.c +++ b/tools/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr) #define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) #define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); }) #define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) -- cgit v1.2.3 From fb8c3a3c52400512fc8b3b61150057b888c30b0d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 14:23:44 +0200 Subject: ath5k: fix building with LEDS=m Randconfig builds still show a failure for the ath5k driver, similar to the one that was fixed for ath9k earlier: WARNING: unmet direct dependencies detected for MAC80211_LEDS Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y]) Selected by [m]: - ATH5K [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && (PCI [=y] || ATH25) && MAC80211 [=y] net/mac80211/led.c: In function 'ieee80211_alloc_led_names': net/mac80211/led.c:34:22: error: 'struct led_trigger' has no member named 'name' 34 | local->rx_led.name = kasprintf(GFP_KERNEL, "%srx", | ^ Copying the same logic from my ath9k patch makes this one work as well, stubbing out the calls to the LED subsystem. Fixes: b64acb28da83 ("ath9k: fix build error with LEDS_CLASS=m") Fixes: 72cdab808714 ("ath9k: Do not select MAC80211_LEDS by default") Fixes: 3a078876caee ("ath5k: convert LED code to use mac80211 triggers") Link: https://lore.kernel.org/all/20210722105501.1000781-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210920122359.353810-1-arnd@kernel.org --- drivers/net/wireless/ath/ath5k/Kconfig | 4 +--- drivers/net/wireless/ath/ath5k/led.c | 10 ++++++---- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig index f35cd8de228e..6914b37bb0fb 100644 --- a/drivers/net/wireless/ath/ath5k/Kconfig +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -3,9 +3,7 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" depends on (PCI || ATH25) && MAC80211 select ATH_COMMON - select MAC80211_LEDS - select LEDS_CLASS - select NEW_LEDS + select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211 select ATH5K_AHB if ATH25 select ATH5K_PCI if !ATH25 help diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 6a2a16856763..33e9928af363 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -89,7 +89,8 @@ static const struct pci_device_id ath5k_led_devices[] = { void ath5k_led_enable(struct ath5k_hw *ah) { - if (test_bit(ATH_STAT_LEDSOFT, ah->status)) { + if (IS_ENABLED(CONFIG_MAC80211_LEDS) && + test_bit(ATH_STAT_LEDSOFT, ah->status)) { ath5k_hw_set_gpio_output(ah, ah->led_pin); ath5k_led_off(ah); } @@ -104,7 +105,8 @@ static void ath5k_led_on(struct ath5k_hw *ah) void ath5k_led_off(struct ath5k_hw *ah) { - if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || + !test_bit(ATH_STAT_LEDSOFT, ah->status)) return; ath5k_hw_set_gpio(ah, ah->led_pin, !ah->led_on); } @@ -146,7 +148,7 @@ ath5k_register_led(struct ath5k_hw *ah, struct ath5k_led *led, static void ath5k_unregister_led(struct ath5k_led *led) { - if (!led->ah) + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !led->ah) return; led_classdev_unregister(&led->led_dev); ath5k_led_off(led->ah); @@ -169,7 +171,7 @@ int ath5k_init_leds(struct ath5k_hw *ah) char name[ATH5K_LED_MAX_NAME_LEN + 1]; const struct pci_device_id *match; - if (!ah->pdev) + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !ah->pdev) return 0; #ifdef CONFIG_ATH5K_AHB -- cgit v1.2.3 From 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:19:00 +0000 Subject: m68k: Handle arrivals of multiple signals correctly When we have several pending signals, have entered with the kernel with large exception frame *and* have already built at least one sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc are going to be junk - the real values are in shifted exception stack frame we'd built when putting together the first sigframe. If that happens, subsequent sigframes are going to be garbage. Not hard to fix - just need to find the "adjusted" frame first and look for format/vector/sr/pc in it. Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/signal.c | 88 ++++++++++++++++++++++------------------------- 1 file changed, 42 insertions(+), 46 deletions(-) diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c index 8f215e79e70e..cd11eb101eac 100644 --- a/arch/m68k/kernel/signal.c +++ b/arch/m68k/kernel/signal.c @@ -447,7 +447,7 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { fpu_version = sc->sc_fpstate[0]; - if (CPU_IS_020_OR_030 && + if (CPU_IS_020_OR_030 && !regs->stkadj && regs->vector >= (VEC_FPBRUC * 4) && regs->vector <= (VEC_FPNAN * 4)) { /* Clear pending exception in 68882 idle frame */ @@ -510,7 +510,7 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs * if (!(CPU_IS_060 || CPU_IS_COLDFIRE)) context_size = fpstate[1]; fpu_version = fpstate[0]; - if (CPU_IS_020_OR_030 && + if (CPU_IS_020_OR_030 && !regs->stkadj && regs->vector >= (VEC_FPBRUC * 4) && regs->vector <= (VEC_FPNAN * 4)) { /* Clear pending exception in 68882 idle frame */ @@ -832,18 +832,24 @@ badframe: return 0; } +static inline struct pt_regs *rte_regs(struct pt_regs *regs) +{ + return (void *)regs + regs->stkadj; +} + static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, unsigned long mask) { + struct pt_regs *tregs = rte_regs(regs); sc->sc_mask = mask; sc->sc_usp = rdusp(); sc->sc_d0 = regs->d0; sc->sc_d1 = regs->d1; sc->sc_a0 = regs->a0; sc->sc_a1 = regs->a1; - sc->sc_sr = regs->sr; - sc->sc_pc = regs->pc; - sc->sc_formatvec = regs->format << 12 | regs->vector; + sc->sc_sr = tregs->sr; + sc->sc_pc = tregs->pc; + sc->sc_formatvec = tregs->format << 12 | tregs->vector; save_a5_state(sc, regs); save_fpu_state(sc, regs); } @@ -851,6 +857,7 @@ static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs) { struct switch_stack *sw = (struct switch_stack *)regs - 1; + struct pt_regs *tregs = rte_regs(regs); greg_t __user *gregs = uc->uc_mcontext.gregs; int err = 0; @@ -871,9 +878,9 @@ static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs * err |= __put_user(sw->a5, &gregs[13]); err |= __put_user(sw->a6, &gregs[14]); err |= __put_user(rdusp(), &gregs[15]); - err |= __put_user(regs->pc, &gregs[16]); - err |= __put_user(regs->sr, &gregs[17]); - err |= __put_user((regs->format << 12) | regs->vector, &uc->uc_formatvec); + err |= __put_user(tregs->pc, &gregs[16]); + err |= __put_user(tregs->sr, &gregs[17]); + err |= __put_user((tregs->format << 12) | tregs->vector, &uc->uc_formatvec); err |= rt_save_fpu_state(uc, regs); return err; } @@ -890,13 +897,14 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { struct sigframe __user *frame; - int fsize = frame_extra_sizes(regs->format); + struct pt_regs *tregs = rte_regs(regs); + int fsize = frame_extra_sizes(tregs->format); struct sigcontext context; int err = 0, sig = ksig->sig; if (fsize < 0) { pr_debug("setup_frame: Unknown frame format %#x\n", - regs->format); + tregs->format); return -EFAULT; } @@ -907,7 +915,7 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, err |= __put_user(sig, &frame->sig); - err |= __put_user(regs->vector, &frame->code); + err |= __put_user(tregs->vector, &frame->code); err |= __put_user(&frame->sc, &frame->psc); if (_NSIG_WORDS > 1) @@ -933,34 +941,28 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, push_cache ((unsigned long) &frame->retcode); - /* - * Set up registers for signal handler. All the state we are about - * to destroy is successfully copied to sigframe. - */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - adjustformat(regs); - /* * This is subtle; if we build more than one sigframe, all but the * first one will see frame format 0 and have fsize == 0, so we won't * screw stkadj. */ - if (fsize) + if (fsize) { regs->stkadj = fsize; - - /* Prepare to skip over the extra stuff in the exception frame. */ - if (regs->stkadj) { - struct pt_regs *tregs = - (struct pt_regs *)((ulong)regs + regs->stkadj); + tregs = rte_regs(regs); pr_debug("Performing stackadjust=%04lx\n", regs->stkadj); - /* This must be copied with decreasing addresses to - handle overlaps. */ tregs->vector = 0; tregs->format = 0; - tregs->pc = regs->pc; tregs->sr = regs->sr; } + + /* + * Set up registers for signal handler. All the state we are about + * to destroy is successfully copied to sigframe. + */ + wrusp ((unsigned long) frame); + tregs->pc = (unsigned long) ksig->ka.sa.sa_handler; + adjustformat(regs); + return 0; } @@ -968,7 +970,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; - int fsize = frame_extra_sizes(regs->format); + struct pt_regs *tregs = rte_regs(regs); + int fsize = frame_extra_sizes(tregs->format); int err = 0, sig = ksig->sig; if (fsize < 0) { @@ -1018,34 +1021,27 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, push_cache ((unsigned long) &frame->retcode); - /* - * Set up registers for signal handler. All the state we are about - * to destroy is successfully copied to sigframe. - */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - adjustformat(regs); - /* * This is subtle; if we build more than one sigframe, all but the * first one will see frame format 0 and have fsize == 0, so we won't * screw stkadj. */ - if (fsize) + if (fsize) { regs->stkadj = fsize; - - /* Prepare to skip over the extra stuff in the exception frame. */ - if (regs->stkadj) { - struct pt_regs *tregs = - (struct pt_regs *)((ulong)regs + regs->stkadj); + tregs = rte_regs(regs); pr_debug("Performing stackadjust=%04lx\n", regs->stkadj); - /* This must be copied with decreasing addresses to - handle overlaps. */ tregs->vector = 0; tregs->format = 0; - tregs->pc = regs->pc; tregs->sr = regs->sr; } + + /* + * Set up registers for signal handler. All the state we are about + * to destroy is successfully copied to sigframe. + */ + wrusp ((unsigned long) frame); + tregs->pc = (unsigned long) ksig->ka.sa.sa_handler; + adjustformat(regs); return 0; } -- cgit v1.2.3 From 50e43a57334400668952f8e551c9d87d3ed2dfef Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:19:45 +0000 Subject: m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal We get there when sigreturn has performed obscene acts on kernel stack; in particular, the location of pt_regs has shifted. We are about to call syscall_trace(), which might stop for tracer. If that happens, we'd better have task_pt_regs() returning correct result... Fucked-up-by: Al Viro Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn") Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/entry.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 9dd76fbb7c6b..ff9e842cec0f 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -186,6 +186,8 @@ ENTRY(ret_from_signal) movel %curptr@(TASK_STACK),%a1 tstb %a1@(TINFO_FLAGS+2) jge 1f + lea %sp@(SWITCH_STACK_SIZE),%a1 + movel %a1,%curptr@(TASK_THREAD+THREAD_ESP0) jbsr syscall_trace 1: RESTORE_SWITCH_STACK addql #4,%sp -- cgit v1.2.3 From 0d20abde987bed05a8963c8aa4276019d54ff9e7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:20:13 +0000 Subject: m68k: Leave stack mangling to asm wrapper of sigreturn() sigreturn has to deal with an unpleasant problem - exception stack frames have different sizes, depending upon the exception (and processor model, as well) and variable-sized part of exception frame may contain information needed for instruction restart. So when signal handler terminates and calls sigreturn to resume the execution at the place where we'd been when we caught the signal, it has to rearrange the frame at the bottom of kernel stack. Worse, it might need to open a gap in the kernel stack, shifting pt_regs towards lower addresses. Doing that from C is insane - we'd need to shift stack frames (return addresses, local variables, etc.) of C call chain, right under the nose of compiler and hope it won't fall apart horribly. What had been actually done is only slightly less insane - an inline asm in mangle_kernel_stack() moved the stuff around, then reset stack pointer and jumped to label in asm glue. However, we can avoid all that mess if the asm wrapper we have to use anyway would reserve some space on the stack between switch_stack and the C stack frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs + switch_stack, memcpy() the variable part of exception frame into the opened gap - all of that without inline asm, buggering C call chain, magical jumps to asm labels, etc. Asm wrapper would need to know where the moved switch_stack has ended up - it might have been shifted into the gap we'd reserved before do_rt_sigreturn() call. That's where it needs to set the stack pointer to. So let the C part return just that and be done with that. While we are at it, the call of berr_040cleanup() we need to do when returning via 68040 bus error exception frame can be moved into C part as well. Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/68000/entry.S | 3 -- arch/m68k/coldfire/entry.S | 3 -- arch/m68k/include/asm/traps.h | 4 ++ arch/m68k/kernel/entry.S | 55 ++++++++++----------- arch/m68k/kernel/signal.c | 111 ++++++++++++++++-------------------------- 5 files changed, 71 insertions(+), 105 deletions(-) diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S index 259b3661b614..cce465e850fe 100644 --- a/arch/m68k/68000/entry.S +++ b/arch/m68k/68000/entry.S @@ -25,7 +25,6 @@ .globl system_call .globl resume .globl ret_from_exception -.globl ret_from_signal .globl sys_call_table .globl bad_interrupt .globl inthandler1 @@ -59,8 +58,6 @@ do_trace: subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace_leave - -ret_from_signal: RESTORE_SWITCH_STACK addql #4,%sp jra ret_from_exception diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index d43a02795a4a..68adb7b5b296 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -51,7 +51,6 @@ sw_usp: .globl system_call .globl resume .globl ret_from_exception -.globl ret_from_signal .globl sys_call_table .globl inthandler @@ -98,8 +97,6 @@ ENTRY(system_call) subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace_leave - -ret_from_signal: RESTORE_SWITCH_STACK addql #4,%sp diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h index 4aff3358fbaf..a9d5c1c870d3 100644 --- a/arch/m68k/include/asm/traps.h +++ b/arch/m68k/include/asm/traps.h @@ -267,6 +267,10 @@ struct frame { } un; }; +#ifdef CONFIG_M68040 +asmlinkage void berr_040cleanup(struct frame *fp); +#endif + #endif /* __ASSEMBLY__ */ #endif /* _M68K_TRAPS_H */ diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index ff9e842cec0f..8fa9822b5922 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -78,20 +78,38 @@ ENTRY(__sys_clone3) ENTRY(sys_sigreturn) SAVE_SWITCH_STACK - movel %sp,%sp@- | switch_stack pointer - pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer + movel %sp,%a1 | switch_stack pointer + lea %sp@(SWITCH_STACK_SIZE),%a0 | pt_regs pointer + lea %sp@(-84),%sp | leave a gap + movel %a1,%sp@- + movel %a0,%sp@- jbsr do_sigreturn - addql #8,%sp - RESTORE_SWITCH_STACK - rts + jra 1f | shared with rt_sigreturn() ENTRY(sys_rt_sigreturn) SAVE_SWITCH_STACK - movel %sp,%sp@- | switch_stack pointer - pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer + movel %sp,%a1 | switch_stack pointer + lea %sp@(SWITCH_STACK_SIZE),%a0 | pt_regs pointer + lea %sp@(-84),%sp | leave a gap + movel %a1,%sp@- + movel %a0,%sp@- + | stack contents: + | [original pt_regs address] [original switch_stack address] + | [gap] [switch_stack] [pt_regs] [exception frame] jbsr do_rt_sigreturn - addql #8,%sp + +1: + | stack contents now: + | [original pt_regs address] [original switch_stack address] + | [unused part of the gap] [moved switch_stack] [moved pt_regs] + | [replacement exception frame] + | return value of do_{rt_,}sigreturn() points to moved switch_stack. + + movel %d0,%sp | discard the leftover junk RESTORE_SWITCH_STACK + | stack contents now is just [syscall return address] [pt_regs] [frame] + | return pt_regs.d0 + movel %sp@(PT_OFF_D0+4),%d0 rts ENTRY(buserr) @@ -182,27 +200,6 @@ do_trace_exit: addql #4,%sp jra .Lret_from_exception -ENTRY(ret_from_signal) - movel %curptr@(TASK_STACK),%a1 - tstb %a1@(TINFO_FLAGS+2) - jge 1f - lea %sp@(SWITCH_STACK_SIZE),%a1 - movel %a1,%curptr@(TASK_THREAD+THREAD_ESP0) - jbsr syscall_trace -1: RESTORE_SWITCH_STACK - addql #4,%sp -/* on 68040 complete pending writebacks if any */ -#ifdef CONFIG_M68040 - bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0 - subql #7,%d0 | bus error frame ? - jbne 1f - movel %sp,%sp@- - jbsr berr_040cleanup - addql #4,%sp -1: -#endif - jra .Lret_from_exception - ENTRY(system_call) SAVE_ALL_SYS diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c index cd11eb101eac..338817d0cb3f 100644 --- a/arch/m68k/kernel/signal.c +++ b/arch/m68k/kernel/signal.c @@ -641,56 +641,35 @@ static inline void siginfo_build_tests(void) static int mangle_kernel_stack(struct pt_regs *regs, int formatvec, void __user *fp) { - int fsize = frame_extra_sizes(formatvec >> 12); - if (fsize < 0) { + int extra = frame_extra_sizes(formatvec >> 12); + char buf[sizeof_field(struct frame, un)]; + + if (extra < 0) { /* * user process trying to return with weird frame format */ pr_debug("user process returning with weird frame format\n"); - return 1; + return -1; } - if (!fsize) { - regs->format = formatvec >> 12; - regs->vector = formatvec & 0xfff; - } else { - struct switch_stack *sw = (struct switch_stack *)regs - 1; - /* yes, twice as much as max(sizeof(frame.un.fmt)) */ - unsigned long buf[sizeof_field(struct frame, un) / 2]; - - /* that'll make sure that expansion won't crap over data */ - if (copy_from_user(buf + fsize / 4, fp, fsize)) - return 1; - - /* point of no return */ - regs->format = formatvec >> 12; - regs->vector = formatvec & 0xfff; -#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) - __asm__ __volatile__ ( -#ifdef CONFIG_COLDFIRE - " movel %0,%/sp\n\t" - " bra ret_from_signal\n" -#else - " movel %0,%/a0\n\t" - " subl %1,%/a0\n\t" /* make room on stack */ - " movel %/a0,%/sp\n\t" /* set stack pointer */ - /* move switch_stack and pt_regs */ - "1: movel %0@+,%/a0@+\n\t" - " dbra %2,1b\n\t" - " lea %/sp@(%c3),%/a0\n\t" /* add offset of fmt */ - " lsrl #2,%1\n\t" - " subql #1,%1\n\t" - /* copy to the gap we'd made */ - "2: movel %4@+,%/a0@+\n\t" - " dbra %1,2b\n\t" - " bral ret_from_signal\n" + if (extra && copy_from_user(buf, fp, extra)) + return -1; + regs->format = formatvec >> 12; + regs->vector = formatvec & 0xfff; + if (extra) { + void *p = (struct switch_stack *)regs - 1; + struct frame *new = (void *)regs - extra; + int size = sizeof(struct pt_regs)+sizeof(struct switch_stack); + + memmove(p - extra, p, size); + memcpy(p - extra + size, buf, extra); + current->thread.esp0 = (unsigned long)&new->ptregs; +#ifdef CONFIG_M68040 + /* on 68040 complete pending writebacks if any */ + if (new->ptregs.format == 7) // bus error frame + berr_040cleanup(new); #endif - : /* no outputs, it doesn't ever return */ - : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), - "n" (frame_offset), "a" (buf + fsize/4) - : "a0"); -#undef frame_offset } - return 0; + return extra; } static inline int @@ -698,7 +677,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u { int formatvec; struct sigcontext context; - int err = 0; siginfo_build_tests(); @@ -707,7 +685,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u /* get previous context */ if (copy_from_user(&context, usc, sizeof(context))) - goto badframe; + return -1; /* restore passed registers */ regs->d0 = context.sc_d0; @@ -720,15 +698,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u wrusp(context.sc_usp); formatvec = context.sc_formatvec; - err = restore_fpu_state(&context); - - if (err || mangle_kernel_stack(regs, formatvec, fp)) - goto badframe; - - return 0; + if (restore_fpu_state(&context)) + return -1; -badframe: - return 1; + return mangle_kernel_stack(regs, formatvec, fp); } static inline int @@ -745,7 +718,7 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, err = __get_user(temp, &uc->uc_mcontext.version); if (temp != MCONTEXT_VERSION) - goto badframe; + return -1; /* restore passed registers */ err |= __get_user(regs->d0, &gregs[0]); err |= __get_user(regs->d1, &gregs[1]); @@ -774,22 +747,17 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, err |= restore_altstack(&uc->uc_stack); if (err) - goto badframe; - - if (mangle_kernel_stack(regs, temp, &uc->uc_extra)) - goto badframe; + return -1; - return 0; - -badframe: - return 1; + return mangle_kernel_stack(regs, temp, &uc->uc_extra); } -asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) +asmlinkage void *do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) { unsigned long usp = rdusp(); struct sigframe __user *frame = (struct sigframe __user *)(usp - 4); sigset_t set; + int size; if (!access_ok(frame, sizeof(*frame))) goto badframe; @@ -801,20 +769,22 @@ asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) set_current_blocked(&set); - if (restore_sigcontext(regs, &frame->sc, frame + 1)) + size = restore_sigcontext(regs, &frame->sc, frame + 1); + if (size < 0) goto badframe; - return regs->d0; + return (void *)sw - size; badframe: force_sig(SIGSEGV); - return 0; + return sw; } -asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) +asmlinkage void *do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) { unsigned long usp = rdusp(); struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4); sigset_t set; + int size; if (!access_ok(frame, sizeof(*frame))) goto badframe; @@ -823,13 +793,14 @@ asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) set_current_blocked(&set); - if (rt_restore_ucontext(regs, sw, &frame->uc)) + size = rt_restore_ucontext(regs, sw, &frame->uc); + if (size < 0) goto badframe; - return regs->d0; + return (void *)sw - size; badframe: force_sig(SIGSEGV); - return 0; + return sw; } static inline struct pt_regs *rte_regs(struct pt_regs *regs) -- cgit v1.2.3 From 1dc4027bc8b524ed03c4db391cd7910eb4ee19d2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:00 +0200 Subject: m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES Document that access_ok is completely broken for coldfire and friends at the moment. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index f98208ccbbcd..610bfe8d64d5 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -16,6 +16,10 @@ static inline int access_ok(const void __user *addr, unsigned long size) { + /* + * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check + * for TASK_SIZE! + */ return 1; } -- cgit v1.2.3 From c4f607c3124e4d2f33604f933b29496ce4111753 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:01 +0200 Subject: m68k: Remove the 030 case in virt_to_phys_slow The 030 case in virt_to_phys_slow can't ever be reached, so remove it. Suggested-by: Michael Schmitz Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-3-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/mm/cache.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index b486c0889eec..e7c1cabbfac4 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -49,24 +49,7 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) if (mmusr & MMU_R_040) return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK); } else { - unsigned short mmusr; - unsigned long *descaddr; - - asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1" - : "=a&" (descaddr), "=m" (mmusr) - : "a" (vaddr), "d" (get_fs().seg)); - if (mmusr & (MMU_I|MMU_B|MMU_L)) - return 0; - descaddr = phys_to_virt((unsigned long)descaddr); - switch (mmusr & MMU_NUM) { - case 1: - return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff); - case 2: - return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff); - case 3: - return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK); - } + WARN_ON_ONCE(!CPU_IS_040_OR_060); } return 0; } -- cgit v1.2.3 From 25d2cae4a5578695f667e868ada38b0b73eb1080 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:02 +0200 Subject: m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user Simplify the handling a bit by using the common helper instead of referencing undefined symbols. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 610bfe8d64d5..01334a9658c4 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -39,9 +39,6 @@ static inline int access_ok(const void __user *addr, #define MOVES "move" #endif -extern int __put_user_bad(void); -extern int __get_user_bad(void); - #define __put_user_asm(res, x, ptr, bwl, reg, err) \ asm volatile ("\n" \ "1: "MOVES"."#bwl" %2,%1\n" \ @@ -105,8 +102,7 @@ asm volatile ("\n" \ break; \ } \ default: \ - __pu_err = __put_user_bad(); \ - break; \ + BUILD_BUG(); \ } \ __pu_err; \ }) @@ -179,8 +175,7 @@ asm volatile ("\n" \ break; \ } \ default: \ - __gu_err = __get_user_bad(); \ - break; \ + BUILD_BUG(); \ } \ __gu_err; \ }) -- cgit v1.2.3 From 01eec1af5ec49b331948ace8f2287580e1594383 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:03 +0200 Subject: m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers Add new helpers for doing the grunt work of the 8-byte {get,put}_user routines to allow for better reuse. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 111 ++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 51 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 01334a9658c4..288ef7d11a7a 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -57,6 +57,31 @@ asm volatile ("\n" \ : "+d" (res), "=m" (*(ptr)) \ : #reg (x), "i" (err)) +#define __put_user_asm8(res, x, ptr) \ +do { \ + const void *__pu_ptr = (const void __force *)(ptr); \ + \ + asm volatile ("\n" \ + "1: "MOVES".l %2,(%1)+\n" \ + "2: "MOVES".l %R2,(%1)\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: movel %3,%0\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .long 3b,10b\n" \ + " .previous" \ + : "+d" (res), "+a" (__pu_ptr) \ + : "r" (x), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. @@ -78,29 +103,8 @@ asm volatile ("\n" \ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ break; \ case 8: \ - { \ - const void __user *__pu_ptr = (ptr); \ - asm volatile ("\n" \ - "1: "MOVES".l %2,(%1)+\n" \ - "2: "MOVES".l %R2,(%1)\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: movel %3,%0\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .long 3b,10b\n" \ - " .previous" \ - : "+d" (__pu_err), "+a" (__pu_ptr) \ - : "r" (__pu_val), "i" (-EFAULT) \ - : "memory"); \ + __put_user_asm8(__pu_err, __pu_val, ptr); \ break; \ - } \ default: \ BUILD_BUG(); \ } \ @@ -130,6 +134,38 @@ asm volatile ("\n" \ (x) = (__force typeof(*(ptr)))(__force unsigned long)__gu_val; \ }) +#define __get_user_asm8(res, x, ptr) \ +do { \ + const void *__gu_ptr = (const void __force *)(ptr); \ + union { \ + u64 l; \ + __typeof__(*(ptr)) t; \ + } __gu_val; \ + \ + asm volatile ("\n" \ + "1: "MOVES".l (%2)+,%1\n" \ + "2: "MOVES".l (%2),%R1\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: move.l %3,%0\n" \ + " sub.l %1,%1\n" \ + " sub.l %R1,%R1\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .previous" \ + : "+d" (res), "=&r" (__gu_val.l), \ + "+a" (__gu_ptr) \ + : "i" (-EFAULT) \ + : "memory"); \ + (x) = __gu_val.t; \ +} while (0) + #define __get_user(x, ptr) \ ({ \ int __gu_err = 0; \ @@ -144,36 +180,9 @@ asm volatile ("\n" \ case 4: \ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ break; \ - case 8: { \ - const void __user *__gu_ptr = (ptr); \ - union { \ - u64 l; \ - __typeof__(*(ptr)) t; \ - } __gu_val; \ - asm volatile ("\n" \ - "1: "MOVES".l (%2)+,%1\n" \ - "2: "MOVES".l (%2),%R1\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub.l %1,%1\n" \ - " sub.l %R1,%R1\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (__gu_err), "=&r" (__gu_val.l), \ - "+a" (__gu_ptr) \ - : "i" (-EFAULT) \ - : "memory"); \ - (x) = __gu_val.t; \ + case 8: \ + __get_user_asm8(__gu_err, x, ptr); \ break; \ - } \ default: \ BUILD_BUG(); \ } \ -- cgit v1.2.3 From 8ade83390930d61c64fe3ab49081990c9d43d0d2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:04 +0200 Subject: m68k: Provide __{get,put}_kernel_nofault Allow non-faulting access to kernel addresses without overriding the address space. Implemented by passing the instruction name to the low-level assembly macros as an argument, and force the use of the normal move instructions for kernel access. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 105 ++++++++++++++++++++++++++++++++-------- 1 file changed, 84 insertions(+), 21 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 288ef7d11a7a..65581a7874d4 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -39,9 +39,9 @@ static inline int access_ok(const void __user *addr, #define MOVES "move" #endif -#define __put_user_asm(res, x, ptr, bwl, reg, err) \ +#define __put_user_asm(inst, res, x, ptr, bwl, reg, err) \ asm volatile ("\n" \ - "1: "MOVES"."#bwl" %2,%1\n" \ + "1: "inst"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -57,13 +57,13 @@ asm volatile ("\n" \ : "+d" (res), "=m" (*(ptr)) \ : #reg (x), "i" (err)) -#define __put_user_asm8(res, x, ptr) \ +#define __put_user_asm8(inst, res, x, ptr) \ do { \ const void *__pu_ptr = (const void __force *)(ptr); \ \ asm volatile ("\n" \ - "1: "MOVES".l %2,(%1)+\n" \ - "2: "MOVES".l %R2,(%1)\n" \ + "1: "inst".l %2,(%1)+\n" \ + "2: "inst".l %R2,(%1)\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -94,16 +94,16 @@ do { \ __chk_user_ptr(ptr); \ switch (sizeof (*(ptr))) { \ case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, b, d, -EFAULT); \ break; \ case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w, r, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, w, r, -EFAULT); \ break; \ case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, l, r, -EFAULT); \ break; \ case 8: \ - __put_user_asm8(__pu_err, __pu_val, ptr); \ + __put_user_asm8(MOVES, __pu_err, __pu_val, ptr); \ break; \ default: \ BUILD_BUG(); \ @@ -113,10 +113,10 @@ do { \ #define put_user(x, ptr) __put_user(x, ptr) -#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ +#define __get_user_asm(inst, res, x, ptr, type, bwl, reg, err) ({ \ type __gu_val; \ asm volatile ("\n" \ - "1: "MOVES"."#bwl" %2,%1\n" \ + "1: "inst"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -134,7 +134,7 @@ do { \ (x) = (__force typeof(*(ptr)))(__force unsigned long)__gu_val; \ }) -#define __get_user_asm8(res, x, ptr) \ +#define __get_user_asm8(inst, res, x, ptr) \ do { \ const void *__gu_ptr = (const void __force *)(ptr); \ union { \ @@ -143,8 +143,8 @@ do { \ } __gu_val; \ \ asm volatile ("\n" \ - "1: "MOVES".l (%2)+,%1\n" \ - "2: "MOVES".l (%2),%R1\n" \ + "1: "inst".l (%2)+,%1\n" \ + "2: "inst".l (%2),%R1\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -172,16 +172,16 @@ do { \ __chk_user_ptr(ptr); \ switch (sizeof(*(ptr))) { \ case 1: \ - __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u8, b, d, -EFAULT); \ break; \ case 2: \ - __get_user_asm(__gu_err, x, ptr, u16, w, r, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u16, w, r, -EFAULT); \ break; \ case 4: \ - __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u32, l, r, -EFAULT); \ break; \ case 8: \ - __get_user_asm8(__gu_err, x, ptr); \ + __get_user_asm8(MOVES, __gu_err, x, ptr); \ break; \ default: \ BUILD_BUG(); \ @@ -330,16 +330,19 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n) switch (n) { case 1: - __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); + __put_user_asm(MOVES, res, *(u8 *)from, (u8 __user *)to, + b, d, 1); break; case 2: - __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, r, 2); + __put_user_asm(MOVES, res, *(u16 *)from, (u16 __user *)to, + w, r, 2); break; case 3: __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); break; case 4: - __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); + __put_user_asm(MOVES, res, *(u32 *)from, (u32 __user *)to, + l, r, 4); break; case 5: __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); @@ -388,6 +391,66 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n) #define INLINE_COPY_FROM_USER #define INLINE_COPY_TO_USER +#define HAVE_GET_KERNEL_NOFAULT + +#define __get_kernel_nofault(dst, src, type, err_label) \ +do { \ + type *__gk_dst = (type *)(dst); \ + type *__gk_src = (type *)(src); \ + int __gk_err = 0; \ + \ + switch (sizeof(type)) { \ + case 1: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u8, b, d, -EFAULT); \ + break; \ + case 2: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u16, w, r, -EFAULT); \ + break; \ + case 4: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u32, l, r, -EFAULT); \ + break; \ + case 8: \ + __get_user_asm8("move", __gk_err, *__gk_dst, __gk_src); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + if (unlikely(__gk_err)) \ + goto err_label; \ +} while (0) + +#define __put_kernel_nofault(dst, src, type, err_label) \ +do { \ + type __pk_src = *(type *)(src); \ + type *__pk_dst = (type *)(dst); \ + int __pk_err = 0; \ + \ + switch (sizeof(type)) { \ + case 1: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + b, d, -EFAULT); \ + break; \ + case 2: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + w, r, -EFAULT); \ + break; \ + case 4: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + l, r, -EFAULT); \ + break; \ + case 8: \ + __put_user_asm8("move", __pk_err, __pk_src, __pk_dst); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + if (unlikely(__pk_err)) \ + goto err_label; \ +} while (0) + #define user_addr_max() \ (uaccess_kernel() ? ~0UL : TASK_SIZE) -- cgit v1.2.3 From 9fde0348640252c79d462c4d29a09a14e8741f5c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:05 +0200 Subject: m68k: Remove set_fs() Add a m68k-only set_fc helper to set the SFC and DFC registers for the few places that need to override it for special MM operations, but disconnect that from the deprecated kernel-wide set_fs() API. Note that the SFC/DFC registers are context switched, so there is no need to disable preemption. Partially based on an earlier patch from Linus Torvalds . Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/68000/entry.S | 1 - arch/m68k/Kconfig | 1 - arch/m68k/coldfire/entry.S | 1 - arch/m68k/include/asm/processor.h | 31 +++++++++++++++++-- arch/m68k/include/asm/segment.h | 59 ------------------------------------- arch/m68k/include/asm/thread_info.h | 3 -- arch/m68k/include/asm/tlbflush.h | 11 ++----- arch/m68k/include/asm/uaccess.h | 4 --- arch/m68k/kernel/asm-offsets.c | 2 +- arch/m68k/kernel/entry.S | 5 ++-- arch/m68k/kernel/process.c | 4 +-- arch/m68k/kernel/traps.c | 13 +++----- arch/m68k/mac/misc.c | 1 - arch/m68k/mm/cache.c | 6 ++-- arch/m68k/mm/init.c | 6 ---- arch/m68k/mm/kmap.c | 1 - arch/m68k/mm/memory.c | 1 - arch/m68k/mm/motorola.c | 2 +- arch/m68k/sun3/config.c | 3 +- arch/m68k/sun3/mmu_emu.c | 6 ++-- arch/m68k/sun3/sun3ints.c | 1 - arch/m68k/sun3x/prom.c | 1 - 22 files changed, 46 insertions(+), 117 deletions(-) delete mode 100644 arch/m68k/include/asm/segment.h diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S index cce465e850fe..997b54933015 100644 --- a/arch/m68k/68000/entry.S +++ b/arch/m68k/68000/entry.S @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 774c35f47eea..0b50da08a9c5 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -29,7 +29,6 @@ config M68K select NO_DMA if !MMU && !COLDFIRE select OLD_SIGACTION select OLD_SIGSUSPEND3 - select SET_FS select UACCESS_MEMCPY if !MMU select VIRT_TO_BUS select ZONE_DMA diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index 68adb7b5b296..9f337c70243a 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -31,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index 3750819ac5a1..f4d82c619a5c 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -9,7 +9,6 @@ #define __ASM_M68K_PROCESSOR_H #include -#include #include #include @@ -75,11 +74,37 @@ static inline void wrusp(unsigned long usp) #define TASK_UNMAPPED_BASE 0 #endif +/* Address spaces (or Function Codes in Motorola lingo) */ +#define USER_DATA 1 +#define USER_PROGRAM 2 +#define SUPER_DATA 5 +#define SUPER_PROGRAM 6 +#define CPU_SPACE 7 + +#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES +/* + * Set the SFC/DFC registers for special MM operations. For most normal + * operation these remain set to USER_DATA for the uaccess routines. + */ +static inline void set_fc(unsigned long val) +{ + WARN_ON_ONCE(in_interrupt()); + + __asm__ __volatile__ ("movec %0,%/sfc\n\t" + "movec %0,%/dfc\n\t" + : /* no outputs */ : "r" (val) : "memory"); +} +#else +static inline void set_fc(unsigned long val) +{ +} +#endif /* CONFIG_CPU_HAS_ADDRESS_SPACES */ + struct thread_struct { unsigned long ksp; /* kernel stack pointer */ unsigned long usp; /* user stack pointer */ unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned short fc; /* saved fc (sfc, dfc) */ unsigned long crp[2]; /* cpu root pointer */ unsigned long esp0; /* points to SR of stack frame */ unsigned long faddr; /* info about last fault */ @@ -92,7 +117,7 @@ struct thread_struct { #define INIT_THREAD { \ .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ .sr = PS_S, \ - .fs = __KERNEL_DS, \ + .fc = USER_DATA, \ } /* diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h deleted file mode 100644 index 2b5e68a71ef7..000000000000 --- a/arch/m68k/include/asm/segment.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -static inline mm_segment_t get_fs(void) -{ - mm_segment_t _v; - __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); - return _v; -} - -static inline void set_fs(mm_segment_t val) -{ - __asm__ __volatile__ ("movec %0,%/sfc\n\t" - "movec %0,%/dfc\n\t" - : /* no outputs */ : "r" (val.seg) : "memory"); -} - -#else -#define USER_DS MAKE_MM_SEG(TASK_SIZE) -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) -#endif - -#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h index 15a757073fa5..c952658ba792 100644 --- a/arch/m68k/include/asm/thread_info.h +++ b/arch/m68k/include/asm/thread_info.h @@ -4,7 +4,6 @@ #include #include -#include /* * On machines with 4k pages we default to an 8k thread size, though we @@ -27,7 +26,6 @@ struct thread_info { struct task_struct *task; /* main task structure */ unsigned long flags; - mm_segment_t addr_limit; /* thread address space */ int preempt_count; /* 0 => preemptable, <0 => BUG */ __u32 cpu; /* should always be 0 on m68k */ unsigned long tp_value; /* thread pointer */ @@ -37,7 +35,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .addr_limit = KERNEL_DS, \ .preempt_count = INIT_PREEMPT_COUNT, \ } diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h index a6318ccd308f..b882e2f4f551 100644 --- a/arch/m68k/include/asm/tlbflush.h +++ b/arch/m68k/include/asm/tlbflush.h @@ -13,13 +13,12 @@ static inline void flush_tlb_kernel_page(void *addr) if (CPU_IS_COLDFIRE) { mmu_write(MMUOR, MMUOR_CNL); } else if (CPU_IS_040_OR_060) { - mm_segment_t old_fs = get_fs(); - set_fs(KERNEL_DS); + set_fc(SUPER_DATA); __asm__ __volatile__(".chip 68040\n\t" "pflush (%0)\n\t" ".chip 68k" : : "a" (addr)); - set_fs(old_fs); + set_fc(USER_DATA); } else if (CPU_IS_020_OR_030) __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr)); } @@ -84,12 +83,8 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { - if (vma->vm_mm == current->active_mm) { - mm_segment_t old_fs = force_uaccess_begin(); - + if (vma->vm_mm == current->active_mm) __flush_tlb_one(addr); - force_uaccess_end(old_fs); - } } static inline void flush_tlb_range(struct vm_area_struct *vma, diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 65581a7874d4..ba670523885c 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -9,7 +9,6 @@ */ #include #include -#include #include /* We let the MMU do all checking */ @@ -451,9 +450,6 @@ do { \ goto err_label; \ } while (0) -#define user_addr_max() \ - (uaccess_kernel() ? ~0UL : TASK_SIZE) - extern long strncpy_from_user(char *dst, const char __user *src, long count); extern __must_check long strnlen_user(const char __user *str, long n); diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index ccea355052ef..906d73230537 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -31,7 +31,7 @@ int main(void) DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); + DEFINE(THREAD_FC, offsetof(struct thread_struct, fc)); DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 8fa9822b5922..9434fca68de5 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include @@ -337,7 +336,7 @@ resume: /* save fs (sfc,%dfc) (may be pointing to kernel memory) */ movec %sfc,%d0 - movew %d0,%a0@(TASK_THREAD+THREAD_FS) + movew %d0,%a0@(TASK_THREAD+THREAD_FC) /* save usp */ /* it is better to use a movel here instead of a movew 8*) */ @@ -423,7 +422,7 @@ resume: movel %a0,%usp /* restore fs (sfc,%dfc) */ - movew %a1@(TASK_THREAD+THREAD_FS),%a0 + movew %a1@(TASK_THREAD+THREAD_FC),%a0 movec %a0,%sfc movec %a0,%dfc diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index db49f9091711..1ab692b952cd 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -92,7 +92,7 @@ void show_regs(struct pt_regs * regs) void flush_thread(void) { - current->thread.fs = __USER_DS; + current->thread.fc = USER_DATA; #ifdef CONFIG_FPU if (!FPU_IS_EMU) { unsigned long zero = 0; @@ -155,7 +155,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg, * Must save the current SFC/DFC value, NOT the value when * the parent was last descheduled - RGH 10-08-96 */ - p->thread.fs = get_fs().seg; + p->thread.fc = USER_DATA; if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) { /* kernel thread */ diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 5b19fcdcd69e..9718ce94cc84 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -181,9 +181,8 @@ static inline void access_error060 (struct frame *fp) static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) { unsigned long mmusr; - mm_segment_t old_fs = get_fs(); - set_fs(MAKE_MM_SEG(wbs)); + set_fc(wbs); if (iswrite) asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); @@ -192,7 +191,7 @@ static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); - set_fs(old_fs); + set_fc(USER_DATA); return mmusr; } @@ -201,10 +200,8 @@ static inline int do_040writeback1(unsigned short wbs, unsigned long wba, unsigned long wbd) { int res = 0; - mm_segment_t old_fs = get_fs(); - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(MAKE_MM_SEG(wbs)); + set_fc(wbs); switch (wbs & WBSIZ_040) { case BA_SIZE_BYTE: @@ -218,9 +215,7 @@ static inline int do_040writeback1(unsigned short wbs, unsigned long wba, break; } - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(old_fs); - + set_fc(USER_DATA); pr_debug("do_040writeback1, res=%d\n", res); diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c index 90f4e9ca1276..4fab34791758 100644 --- a/arch/m68k/mac/misc.c +++ b/arch/m68k/mac/misc.c @@ -18,7 +18,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index e7c1cabbfac4..dde978e66f14 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -90,11 +90,9 @@ void flush_icache_user_range(unsigned long address, unsigned long endaddr) void flush_icache_range(unsigned long address, unsigned long endaddr) { - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); + set_fc(SUPER_DATA); flush_icache_user_range(address, endaddr); - set_fs(old_fs); + set_fc(USER_DATA); } EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index 5d749e188246..1b47bec15832 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -72,12 +72,6 @@ void __init paging_init(void) if (!empty_zero_page) panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, PAGE_SIZE, PAGE_SIZE); - - /* - * Set up SFC/DFC registers (user data space). - */ - set_fs (USER_DS); - max_zone_pfn[ZONE_DMA] = end_mem >> PAGE_SHIFT; free_area_init(max_zone_pfn); } diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index 1269d513b221..20ddf71b43d0 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index fe75aecfb238..c2c03b0a1567 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 3a653f0a4188..9f3f77785aa7 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -467,7 +467,7 @@ void __init paging_init(void) /* * Set up SFC/DFC registers */ - set_fs(KERNEL_DS); + set_fc(USER_DATA); #ifdef DEBUG printk ("before free_area_init\n"); diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c index f7dd47232b6c..203f428a0344 100644 --- a/arch/m68k/sun3/config.c +++ b/arch/m68k/sun3/config.c @@ -31,7 +31,6 @@ #include #include #include -#include #include char sun3_reserved_pmeg[SUN3_PMEGS_NUM]; @@ -89,7 +88,7 @@ void __init sun3_init(void) sun3_reserved_pmeg[249] = 1; sun3_reserved_pmeg[252] = 1; sun3_reserved_pmeg[253] = 1; - set_fs(KERNEL_DS); + set_fc(USER_DATA); } /* Without this, Bad Things happen when something calls arch_reset. */ diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c index 7aa879b7c7ff..7ec20817c0c9 100644 --- a/arch/m68k/sun3/mmu_emu.c +++ b/arch/m68k/sun3/mmu_emu.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -191,14 +190,13 @@ void __init mmu_emu_init(unsigned long bootmem_end) for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE) sun3_put_segmap(seg, SUN3_INVALID_PMEG); - set_fs(MAKE_MM_SEG(3)); + set_fc(3); for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) { i = sun3_get_segmap(seg); for(j = 1; j < CONTEXTS_NUM; j++) (*(romvec->pv_setctxt))(j, (void *)seg, i); } - set_fs(KERNEL_DS); - + set_fc(USER_DATA); } /* erase the mappings for a dead context. Uses the pg_dir for hints diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 41ae422119d3..36cc280a4505 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m68k/sun3x/prom.c b/arch/m68k/sun3x/prom.c index 74d2fe57524b..64c23bfaa90c 100644 --- a/arch/m68k/sun3x/prom.c +++ b/arch/m68k/sun3x/prom.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 14351f08ed5c8b888cdd95651152db7e096ee27f Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 16 Sep 2021 12:05:28 -0300 Subject: RDMA/hns: Work around broken constant propagation in gcc 8 gcc 8.3 and 5.4 throw this: In function 'modify_qp_init_to_rtr', ././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) [..] drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP' *((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \ ^~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write' #define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val) ^~~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write' hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini); Because gcc has miscalculated the constantness of lp_pktn_ini: mtu = ib_mtu_enum_to_int(ib_mtu); if (WARN_ON(mtu < 0)) [..] lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4 and 8 which is compatible with the 4 bit field in the FIELD_PREP. Work around this broken compiler by adding a 'can never be true' constraint on lp_pktn_ini's value which clears out the problem. Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context") Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com Reported-by: Geert Uytterhoeven Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 5b9953105752..a9c00a2e8ebd 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4397,7 +4397,12 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, hr_qp->path_mtu = ib_mtu; mtu = ib_mtu_enum_to_int(ib_mtu); - if (WARN_ON(mtu < 0)) + if (WARN_ON(mtu <= 0)) + return -EINVAL; +#define MAX_LP_MSG_LEN 65536 + /* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */ + lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); + if (WARN_ON(lp_pktn_ini >= 0xF)) return -EINVAL; if (attr_mask & IB_QP_PATH_MTU) { @@ -4405,10 +4410,6 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, hr_reg_clear(qpc_mask, QPC_MTU); } -#define MAX_LP_MSG_LEN 65536 - /* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */ - lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); - hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini); hr_reg_clear(qpc_mask, QPC_LP_PKTN_INI); -- cgit v1.2.3 From 2938b2978a70d4cc10777ee71c9e512ffe4e0f4b Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:09 +0300 Subject: hwmon: (tmp421) handle I2C errors Function i2c_smbus_read_byte_data() can return a negative error number instead of the data read if I2C transaction failed for whatever reason. Lack of error checking can lead to serious issues on production hardware, e.g. errors treated as temperatures produce spurious critical temperature-crossed-threshold errors in BMC logs for OCP server hardware. The patch was tested with Mellanox OCP Mezzanine card emulating TMP421 protocol for temperature sensing which sometimes leads to I2C protocol error during early boot up stage. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-1-fercerpav@gmail.com [groeck: dropped unnecessary line breaks] Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index ede66ea6a730..8fd8c3a94dfe 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -119,38 +119,56 @@ static int temp_from_u16(u16 reg) return (temp * 1000 + 128) / 256; } -static struct tmp421_data *tmp421_update_device(struct device *dev) +static int tmp421_update_device(struct tmp421_data *data) { - struct tmp421_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; + int ret = 0; int i; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + (HZ / 2)) || !data->valid) { - data->config = i2c_smbus_read_byte_data(client, - TMP421_CONFIG_REG_1); + ret = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1); + if (ret < 0) + goto exit; + data->config = ret; for (i = 0; i < data->channels; i++) { - data->temp[i] = i2c_smbus_read_byte_data(client, - TMP421_TEMP_MSB[i]) << 8; - data->temp[i] |= i2c_smbus_read_byte_data(client, - TMP421_TEMP_LSB[i]); + ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_MSB[i]); + if (ret < 0) + goto exit; + data->temp[i] = ret << 8; + + ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_LSB[i]); + if (ret < 0) + goto exit; + data->temp[i] |= ret; } data->last_updated = jiffies; data->valid = 1; } +exit: mutex_unlock(&data->update_lock); - return data; + if (ret < 0) { + data->valid = 0; + return ret; + } + + return 0; } static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { - struct tmp421_data *tmp421 = tmp421_update_device(dev); + struct tmp421_data *tmp421 = dev_get_drvdata(dev); + int ret = 0; + + ret = tmp421_update_device(tmp421); + if (ret) + return ret; switch (attr) { case hwmon_temp_input: -- cgit v1.2.3 From 540effa7f283d25bcc13c0940d808002fee340b8 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:10 +0300 Subject: hwmon: (tmp421) report /PVLD condition as fault For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 8fd8c3a94dfe..c9ef83627bb7 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -179,10 +179,10 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, return 0; case hwmon_temp_fault: /* - * The OPEN bit signals a fault. This is bit 0 of the temperature - * register (low byte). + * Any of OPEN or /PVLD bits indicate a hardware mulfunction + * and the conversion result may be incorrect */ - *val = tmp421->temp[channel] & 0x01; + *val = !!(tmp421->temp[channel] & 0x03); return 0; default: return -EOPNOTSUPP; @@ -195,9 +195,6 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, { switch (attr) { case hwmon_temp_fault: - if (channel == 0) - return 0; - return 0444; case hwmon_temp_input: return 0444; default: -- cgit v1.2.3 From 724e8af85854c4d3401313b6dd7d79cf792d8990 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:11 +0300 Subject: hwmon: (tmp421) fix rounding for negative values Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index c9ef83627bb7..b963a369c5ab 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -100,23 +100,17 @@ struct tmp421_data { s16 temp[4]; }; -static int temp_from_s16(s16 reg) +static int temp_from_raw(u16 reg, bool extended) { /* Mask out status bits */ int temp = reg & ~0xf; - return (temp * 1000 + 128) / 256; -} - -static int temp_from_u16(u16 reg) -{ - /* Mask out status bits */ - int temp = reg & ~0xf; - - /* Add offset for extended temperature range. */ - temp -= 64 * 256; + if (extended) + temp = temp - 64 * 256; + else + temp = (s16)temp; - return (temp * 1000 + 128) / 256; + return DIV_ROUND_CLOSEST(temp * 1000, 256); } static int tmp421_update_device(struct tmp421_data *data) @@ -172,10 +166,8 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, switch (attr) { case hwmon_temp_input: - if (tmp421->config & TMP421_CONFIG_RANGE) - *val = temp_from_u16(tmp421->temp[channel]); - else - *val = temp_from_s16(tmp421->temp[channel]); + *val = temp_from_raw(tmp421->temp[channel], + tmp421->config & TMP421_CONFIG_RANGE); return 0; case hwmon_temp_fault: /* -- cgit v1.2.3 From 6f7d70467121f790b36af2d84bc02b5c236bf5e6 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 23 Sep 2021 22:11:13 +0200 Subject: hwmon: (ltc2947) Properly handle errors when looking for the external clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The return value of devm_clk_get should in general be propagated to upper layer. In this case the clk is optional, use the appropriate wrapper instead of interpreting all errors as "The optional clk is not available". Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc2947-core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/ltc2947-core.c b/drivers/hwmon/ltc2947-core.c index bb3f7749a0b0..5423466de697 100644 --- a/drivers/hwmon/ltc2947-core.c +++ b/drivers/hwmon/ltc2947-core.c @@ -989,8 +989,12 @@ static int ltc2947_setup(struct ltc2947_data *st) return ret; /* check external clock presence */ - extclk = devm_clk_get(st->dev, NULL); - if (!IS_ERR(extclk)) { + extclk = devm_clk_get_optional(st->dev, NULL); + if (IS_ERR(extclk)) + return dev_err_probe(st->dev, PTR_ERR(extclk), + "Failed to get external clock\n"); + + if (extclk) { unsigned long rate_hz; u8 pre = 0, div, tbctl; u64 aux; -- cgit v1.2.3 From 325fd36ae76a6d089983b2d2eccb41237d35b221 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 23 Sep 2021 16:23:33 +0300 Subject: net: enetc: fix the incorrect clearing of IF_MODE bits The enetc phylink .mac_config handler intends to clear the IFMODE field (bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the other fields instead. For normal operation, the bug was inconsequential, due to the fact that we write the PM0_IF_MODE register in two stages, first in phylink .mac_config (which incorrectly cleared out a bunch of stuff), then we update the speed and duplex to the correct values in phylink .mac_link_up. Judging by the code (not tested), it looks like maybe loopback mode was broken, since this is one of the settings in PM0_IF_MODE which is incorrectly cleared. Fixes: c76a97218dcb ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode") Reported-by: Pavel Machek (CIP) Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 60d94e0a07d6..4c977dfc44f0 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -541,8 +541,7 @@ static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode) if (phy_interface_mode_is_rgmii(phy_mode)) { val = enetc_port_rd(hw, ENETC_PM0_IF_MODE); - val &= ~ENETC_PM0_IFM_EN_AUTO; - val &= ENETC_PM0_IFM_IFMODE_MASK; + val &= ~(ENETC_PM0_IFM_EN_AUTO | ENETC_PM0_IFM_IFMODE_MASK); val |= ENETC_PM0_IFM_IFMODE_GMII | ENETC_PM0_IFM_RG; enetc_port_wr(hw, ENETC_PM0_IF_MODE, val); } -- cgit v1.2.3 From 597aa16c782496bf74c5dc3b45ff472ade6cee64 Mon Sep 17 00:00:00 2001 From: Xiao Liang Date: Thu, 23 Sep 2021 23:03:19 +0800 Subject: net: ipv4: Fix rtnexthop len when RTA_FLOW is present Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop() to get the length of rtnexthop correct. Fixes: b0f60193632e ("ipv4: Refactor nexthop attributes in fib_dump_info") Signed-off-by: Xiao Liang Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/ip_fib.h | 2 +- include/net/nexthop.h | 2 +- net/ipv4/fib_semantics.c | 16 +++++++++------- net/ipv6/route.c | 5 +++-- 4 files changed, 14 insertions(+), 11 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 21c5386d4a6d..ab5348e57db1 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -597,5 +597,5 @@ int ip_valid_fib_dump_req(struct net *net, const struct nlmsghdr *nlh, int fib_nexthop_info(struct sk_buff *skb, const struct fib_nh_common *nh, u8 rt_family, unsigned char *flags, bool skip_oif); int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nh, - int nh_weight, u8 rt_family); + int nh_weight, u8 rt_family, u32 nh_tclassid); #endif /* _NET_FIB_H */ diff --git a/include/net/nexthop.h b/include/net/nexthop.h index 10e1777877e6..28085b995ddc 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -325,7 +325,7 @@ int nexthop_mpath_fill_node(struct sk_buff *skb, struct nexthop *nh, struct fib_nh_common *nhc = &nhi->fib_nhc; int weight = nhg->nh_entries[i].weight; - if (fib_add_nexthop(skb, nhc, weight, rt_family) < 0) + if (fib_add_nexthop(skb, nhc, weight, rt_family, 0) < 0) return -EMSGSIZE; } diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index b42c429cebbe..3364cb9c67e0 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1661,7 +1661,7 @@ EXPORT_SYMBOL_GPL(fib_nexthop_info); #if IS_ENABLED(CONFIG_IP_ROUTE_MULTIPATH) || IS_ENABLED(CONFIG_IPV6) int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nhc, - int nh_weight, u8 rt_family) + int nh_weight, u8 rt_family, u32 nh_tclassid) { const struct net_device *dev = nhc->nhc_dev; struct rtnexthop *rtnh; @@ -1679,6 +1679,9 @@ int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nhc, rtnh->rtnh_flags = flags; + if (nh_tclassid && nla_put_u32(skb, RTA_FLOW, nh_tclassid)) + goto nla_put_failure; + /* length of rtnetlink header + attributes */ rtnh->rtnh_len = nlmsg_get_pos(skb) - (void *)rtnh; @@ -1706,14 +1709,13 @@ static int fib_add_multipath(struct sk_buff *skb, struct fib_info *fi) } for_nexthops(fi) { - if (fib_add_nexthop(skb, &nh->nh_common, nh->fib_nh_weight, - AF_INET) < 0) - goto nla_put_failure; + u32 nh_tclassid = 0; #ifdef CONFIG_IP_ROUTE_CLASSID - if (nh->nh_tclassid && - nla_put_u32(skb, RTA_FLOW, nh->nh_tclassid)) - goto nla_put_failure; + nh_tclassid = nh->nh_tclassid; #endif + if (fib_add_nexthop(skb, &nh->nh_common, nh->fib_nh_weight, + AF_INET, nh_tclassid) < 0) + goto nla_put_failure; } endfor_nexthops(fi); mp_end: diff --git a/net/ipv6/route.c b/net/ipv6/route.c index dbc224023977..9b9ef09382ab 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -5681,14 +5681,15 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, goto nla_put_failure; if (fib_add_nexthop(skb, &rt->fib6_nh->nh_common, - rt->fib6_nh->fib_nh_weight, AF_INET6) < 0) + rt->fib6_nh->fib_nh_weight, AF_INET6, + 0) < 0) goto nla_put_failure; list_for_each_entry_safe(sibling, next_sibling, &rt->fib6_siblings, fib6_siblings) { if (fib_add_nexthop(skb, &sibling->fib6_nh->nh_common, sibling->fib6_nh->fib_nh_weight, - AF_INET6) < 0) + AF_INET6, 0) < 0) goto nla_put_failure; } -- cgit v1.2.3 From 664bb2e45b89cd8213e3c9772713323f75e21892 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Wed, 22 Sep 2021 12:24:04 +0100 Subject: clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical Add IA55_CLK and DMAC_ACLK as critical clocks. Previously it worked ok, because of a bug in clock status function and the following patch in this series fixes the original bug. Fixes: c3e67ad6f5a2 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions") Fixes: eb829e549ba6 ("clk: renesas: r9a07g044: Add DMAC clocks/resets") Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20210922112405.26413-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a07g044-cpg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c index 4c94b94c4125..1490446985e2 100644 --- a/drivers/clk/renesas/r9a07g044-cpg.c +++ b/drivers/clk/renesas/r9a07g044-cpg.c @@ -186,6 +186,8 @@ static struct rzg2l_reset r9a07g044_resets[] = { static const unsigned int r9a07g044_crit_mod_clks[] __initconst = { MOD_CLK_BASE + R9A07G044_GIC600_GICCLK, + MOD_CLK_BASE + R9A07G044_IA55_CLK, + MOD_CLK_BASE + R9A07G044_DMAC_ACLK, }; const struct rzg2l_cpg_info r9a07g044_cpg_info = { -- cgit v1.2.3 From fa2a30f8e0aa9304919750b116a9e9e322465299 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Wed, 22 Sep 2021 12:24:05 +0100 Subject: clk: renesas: rzg2l: Fix clk status function As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value 0 means clock is not supplied and 1 means clock is supplied. This patch fixes the issue by removing the inverted logic. Fixing the above, triggered following 2 issues 1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK. Fixed this issue by adding these clocks as critical clocks. 2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK. So will provide a fix in the DMA driver to turn on DMA_PCLK. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/rzg2l-cpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c index 3b3b2c3347f3..761922ea5db7 100644 --- a/drivers/clk/renesas/rzg2l-cpg.c +++ b/drivers/clk/renesas/rzg2l-cpg.c @@ -391,7 +391,7 @@ static int rzg2l_mod_clock_is_enabled(struct clk_hw *hw) value = readl(priv->base + CLK_MON_R(clock->off)); - return !(value & bitmask); + return value & bitmask; } static const struct clk_ops rzg2l_mod_clock_ops = { -- cgit v1.2.3 From 5ab8a447bcfee1ded709e7ff5dc7608ca9f66ae2 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 24 Sep 2021 01:00:16 +0300 Subject: smsc95xx: fix stalled rx after link change After commit 05b35e7eb9a1 ("smsc95xx: add phylib support"), link changes are no longer propagated to usbnet. As a result, rx URB allocation won't happen until there is a packet sent out first (this might never happen, e.g. running just ssh server with a static IP). Fix by triggering usbnet EVENT_LINK_CHANGE. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Aaro Koskinen Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 7d953974eb9b..26b1bd8e845b 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1178,7 +1178,10 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf) static void smsc95xx_handle_link_change(struct net_device *net) { + struct usbnet *dev = netdev_priv(net); + phy_print_status(net->phydev); + usbnet_defer_kevent(dev, EVENT_LINK_CHANGE); } static int smsc95xx_start_phy(struct usbnet *dev) -- cgit v1.2.3 From 4526fe74c3c5095cc55931a3a6fb4932f9e06002 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 24 Sep 2021 11:26:52 +0200 Subject: drivers: net: mhi: fix error path in mhi_net_newlink Fix double free_netdev when mhi_prepare_for_transfer fails. Fixes: 3ffec6a14f24 ("net: Add mhi-net driver") Signed-off-by: Daniele Palmas Reviewed-by: Manivannan Sadhasivam Reviewed-by: Loic Poulain Signed-off-by: David S. Miller --- drivers/net/mhi_net.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c index d127eb6e9257..aaa628f859fd 100644 --- a/drivers/net/mhi_net.c +++ b/drivers/net/mhi_net.c @@ -321,7 +321,7 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev) /* Start MHI channels */ err = mhi_prepare_for_transfer(mhi_dev); if (err) - goto out_err; + return err; /* Number of transfer descriptors determines size of the queue */ mhi_netdev->rx_queue_sz = mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE); @@ -331,10 +331,6 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev) return err; return 0; - -out_err: - free_netdev(ndev); - return err; } static void mhi_net_dellink(struct mhi_device *mhi_dev, struct net_device *ndev) -- cgit v1.2.3 From adfc8f9d2f9fefd880abc82cfbf62cbfe6539c97 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 23 Sep 2021 17:29:39 -0700 Subject: NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE SERIAL_CORE_CONSOLE depends on TTY so EARLY_PRINTK should also depend on TTY so that it does not select SERIAL_CORE_CONSOLE inadvertently. WARNING: unmet direct dependencies detected for SERIAL_CORE_CONSOLE Depends on [n]: TTY [=n] && HAS_IOMEM [=y] Selected by [y]: - EARLY_PRINTK [=y] Fixes: e8bf5bc776ed ("nios2: add early printk support") Signed-off-by: Randy Dunlap Cc: Dinh Nguyen Signed-off-by: Dinh Nguyen --- arch/nios2/Kconfig.debug | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/nios2/Kconfig.debug b/arch/nios2/Kconfig.debug index a8bc06e96ef5..ca1beb87f987 100644 --- a/arch/nios2/Kconfig.debug +++ b/arch/nios2/Kconfig.debug @@ -3,9 +3,10 @@ config EARLY_PRINTK bool "Activate early kernel debugging" default y + depends on TTY select SERIAL_CORE_CONSOLE help - Enable early printk on console + Enable early printk on console. This is useful for kernel debugging when your machine crashes very early before the console code is initialized. You should normally say N here, unless you want to debug such a crash. -- cgit v1.2.3 From a86cd017a40a66b1a3db005bfee4e76a1ae9a432 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Mon, 13 Sep 2021 11:04:42 +0300 Subject: RDMA/usnic: Lock VF with mutex instead of spinlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Usnic VF doesn't need lock in atomic context to create QPs, so it is safe to use mutex instead of spinlock. Such change fixes the following smatch error. Smatch static checker warning: lib/kobject.c:289 kobject_set_name_vargs() warn: sleeping in atomic context Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com Reported-by: Dan Carpenter Signed-off-by: Leon Romanovsky Reviewed-by: Håkon Bugge Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/usnic/usnic_ib.h | 2 +- drivers/infiniband/hw/usnic/usnic_ib_main.c | 2 +- drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 16 ++++++++-------- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/usnic/usnic_ib.h b/drivers/infiniband/hw/usnic/usnic_ib.h index 84dd682d2334..b350081aeb5a 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib.h +++ b/drivers/infiniband/hw/usnic/usnic_ib.h @@ -90,7 +90,7 @@ struct usnic_ib_dev { struct usnic_ib_vf { struct usnic_ib_dev *pf; - spinlock_t lock; + struct mutex lock; struct usnic_vnic *vnic; unsigned int qp_grp_ref_cnt; struct usnic_ib_pd *pd; diff --git a/drivers/infiniband/hw/usnic/usnic_ib_main.c b/drivers/infiniband/hw/usnic/usnic_ib_main.c index 228e9a36dad0..d346dd48e731 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_main.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_main.c @@ -572,7 +572,7 @@ static int usnic_ib_pci_probe(struct pci_dev *pdev, } vf->pf = pf; - spin_lock_init(&vf->lock); + mutex_init(&vf->lock); mutex_lock(&pf->usdev_lock); list_add_tail(&vf->link, &pf->vf_dev_list); /* diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c index 06a4e9d4545d..756a83bcff58 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c @@ -196,7 +196,7 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, for (i = 0; dev_list[i]; i++) { dev = dev_list[i]; vf = dev_get_drvdata(dev); - spin_lock(&vf->lock); + mutex_lock(&vf->lock); vnic = vf->vnic; if (!usnic_vnic_check_room(vnic, res_spec)) { usnic_dbg("Found used vnic %s from %s\n", @@ -208,10 +208,10 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, vf, pd, res_spec, trans_spec); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); goto qp_grp_check; } - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } usnic_uiom_free_dev_list(dev_list); @@ -220,7 +220,7 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, /* Try to find resources on an unused vf */ list_for_each_entry(vf, &us_ibdev->vf_dev_list, link) { - spin_lock(&vf->lock); + mutex_lock(&vf->lock); vnic = vf->vnic; if (vf->qp_grp_ref_cnt == 0 && usnic_vnic_check_room(vnic, res_spec) == 0) { @@ -228,10 +228,10 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, vf, pd, res_spec, trans_spec); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); goto qp_grp_check; } - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } usnic_info("No free qp grp found on %s\n", @@ -253,9 +253,9 @@ static void qp_grp_destroy(struct usnic_ib_qp_grp *qp_grp) WARN_ON(qp_grp->state != IB_QPS_RESET); - spin_lock(&vf->lock); + mutex_lock(&vf->lock); usnic_ib_qp_grp_destroy(qp_grp); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } static int create_qp_validate_user_data(struct usnic_ib_create_qp_cmd cmd) -- cgit v1.2.3 From 6c1ee4d304983d2f68bf7639d5912f781398d5ac Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Thu, 23 Sep 2021 18:05:36 +0300 Subject: fs/ntfs3: Fix logical error in ntfs_create_inode We need to always call indx_delete_entry after indx_insert_entry if error occurred. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index d583b71bec50..d51bf4018835 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -1575,7 +1575,7 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, if (!S_ISLNK(mode) && (sb->s_flags & SB_POSIXACL)) { err = ntfs_init_acl(mnt_userns, inode, dir); if (err) - goto out6; + goto out7; } else #endif { -- cgit v1.2.3 From d562e901f25d275b55b0496fe01935beeff0ed37 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Thu, 23 Sep 2021 18:04:26 +0300 Subject: fs/ntfs3: Move ni_lock_dir and ni_unlock into ntfs_create_inode Now ntfs3 locks mutex for smaller time. Theoretically in successful cases those locks aren't needed at all. But proving the same for error cases is difficult. So instead of removing them we just move them. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/inode.c | 17 ++++++++++++++--- fs/ntfs3/namei.c | 20 -------------------- 2 files changed, 14 insertions(+), 23 deletions(-) diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index d51bf4018835..7dd162f6a7e2 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -1198,9 +1198,13 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, struct REPARSE_DATA_BUFFER *rp = NULL; bool rp_inserted = false; + ni_lock_dir(dir_ni); + dir_root = indx_get_root(&dir_ni->dir, dir_ni, NULL, NULL); - if (!dir_root) - return ERR_PTR(-EINVAL); + if (!dir_root) { + err = -EINVAL; + goto out1; + } if (S_ISDIR(mode)) { /* Use parent's directory attributes. */ @@ -1549,6 +1553,9 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, if (err) goto out6; + /* Unlock parent directory before ntfs_init_acl. */ + ni_unlock(dir_ni); + inode->i_generation = le16_to_cpu(rec->seq); dir->i_mtime = dir->i_ctime = inode->i_atime; @@ -1605,8 +1612,10 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, out7: /* Undo 'indx_insert_entry'. */ + ni_lock_dir(dir_ni); indx_delete_entry(&dir_ni->dir, dir_ni, new_de + 1, le16_to_cpu(new_de->key_size), sbi); + /* ni_unlock(dir_ni); will be called later. */ out6: if (rp_inserted) ntfs_remove_reparse(sbi, IO_REPARSE_TAG_SYMLINK, &new_de->ref); @@ -1630,8 +1639,10 @@ out2: kfree(rp); out1: - if (err) + if (err) { + ni_unlock(dir_ni); return ERR_PTR(err); + } unlock_new_inode(inode); diff --git a/fs/ntfs3/namei.c b/fs/ntfs3/namei.c index 1c475da4e19d..bc741213ad84 100644 --- a/fs/ntfs3/namei.c +++ b/fs/ntfs3/namei.c @@ -95,16 +95,11 @@ static struct dentry *ntfs_lookup(struct inode *dir, struct dentry *dentry, static int ntfs_create(struct user_namespace *mnt_userns, struct inode *dir, struct dentry *dentry, umode_t mode, bool excl) { - struct ntfs_inode *ni = ntfs_i(dir); struct inode *inode; - ni_lock_dir(ni); - inode = ntfs_create_inode(mnt_userns, dir, dentry, NULL, S_IFREG | mode, 0, NULL, 0, NULL); - ni_unlock(ni); - return IS_ERR(inode) ? PTR_ERR(inode) : 0; } @@ -116,16 +111,11 @@ static int ntfs_create(struct user_namespace *mnt_userns, struct inode *dir, static int ntfs_mknod(struct user_namespace *mnt_userns, struct inode *dir, struct dentry *dentry, umode_t mode, dev_t rdev) { - struct ntfs_inode *ni = ntfs_i(dir); struct inode *inode; - ni_lock_dir(ni); - inode = ntfs_create_inode(mnt_userns, dir, dentry, NULL, mode, rdev, NULL, 0, NULL); - ni_unlock(ni); - return IS_ERR(inode) ? PTR_ERR(inode) : 0; } @@ -196,15 +186,10 @@ static int ntfs_symlink(struct user_namespace *mnt_userns, struct inode *dir, { u32 size = strlen(symname); struct inode *inode; - struct ntfs_inode *ni = ntfs_i(dir); - - ni_lock_dir(ni); inode = ntfs_create_inode(mnt_userns, dir, dentry, NULL, S_IFLNK | 0777, 0, symname, size, NULL); - ni_unlock(ni); - return IS_ERR(inode) ? PTR_ERR(inode) : 0; } @@ -215,15 +200,10 @@ static int ntfs_mkdir(struct user_namespace *mnt_userns, struct inode *dir, struct dentry *dentry, umode_t mode) { struct inode *inode; - struct ntfs_inode *ni = ntfs_i(dir); - - ni_lock_dir(ni); inode = ntfs_create_inode(mnt_userns, dir, dentry, NULL, S_IFDIR | mode, 0, NULL, 0, NULL); - ni_unlock(ni); - return IS_ERR(inode) ? PTR_ERR(inode) : 0; } -- cgit v1.2.3 From 0bd5fdb811b0449fcef948a100099cc3197f1b73 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 22 Sep 2021 18:28:36 +0300 Subject: fs/ntfs3: Refactor ntfs_get_acl_ex for better readability We can safely move set_cached_acl because it works with NULL acl too. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 5c7c5c7a5ec1..3795943efc8e 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -518,12 +518,15 @@ static struct posix_acl *ntfs_get_acl_ex(struct user_namespace *mnt_userns, /* Translate extended attribute to acl. */ if (err >= 0) { acl = posix_acl_from_xattr(mnt_userns, buf, err); - if (!IS_ERR(acl)) - set_cached_acl(inode, type, acl); + } else if (err == -ENODATA) { + acl = NULL; } else { - acl = err == -ENODATA ? NULL : ERR_PTR(err); + acl = ERR_PTR(err); } + if (!IS_ERR(acl)) + set_cached_acl(inode, type, acl); + __putname(buf); return acl; -- cgit v1.2.3 From 398c35f4d78410725e154c2fc0a51ecac05a3f1f Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 22 Sep 2021 18:33:38 +0300 Subject: fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex In case of removing of xattr there must be XATTR_REPLACE flag and zero length. We already check XATTR_REPLACE in ntfs_set_ea, so now we pass XATTR_REPLACE to ntfs_set_ea. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 3795943efc8e..70f2f9eb6b1e 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -549,6 +549,7 @@ static noinline int ntfs_set_acl_ex(struct user_namespace *mnt_userns, size_t size, name_len; void *value = NULL; int err = 0; + int flags; if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; @@ -591,20 +592,24 @@ static noinline int ntfs_set_acl_ex(struct user_namespace *mnt_userns, } if (!acl) { + /* Remove xattr if it can be presented via mode. */ size = 0; value = NULL; + flags = XATTR_REPLACE; } else { size = posix_acl_xattr_size(acl->a_count); value = kmalloc(size, GFP_NOFS); if (!value) return -ENOMEM; - err = posix_acl_to_xattr(mnt_userns, acl, value, size); if (err < 0) goto out; + flags = 0; } - err = ntfs_set_ea(inode, name, name_len, value, size, 0, locked); + err = ntfs_set_ea(inode, name, name_len, value, size, flags, locked); + if (err == -ENODATA && !size) + err = 0; /* Removing non existed xattr. */ if (!err) set_cached_acl(inode, type, acl); -- cgit v1.2.3 From ba77237ef880320105e681b93d596b2fb13860f9 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 22 Sep 2021 18:46:14 +0300 Subject: fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode Right now ntfs3 uses posix_acl_equiv_mode instead of posix_acl_update_mode like all other fs. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 70f2f9eb6b1e..59ec5e61a239 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -559,22 +559,15 @@ static noinline int ntfs_set_acl_ex(struct user_namespace *mnt_userns, if (acl) { umode_t mode = inode->i_mode; - err = posix_acl_equiv_mode(acl, &mode); - if (err < 0) - return err; + err = posix_acl_update_mode(mnt_userns, inode, &mode, + &acl); + if (err) + goto out; if (inode->i_mode != mode) { inode->i_mode = mode; mark_inode_dirty(inode); } - - if (!err) { - /* - * ACL can be exactly represented in the - * traditional file mode permission bits. - */ - acl = NULL; - } } name = XATTR_NAME_POSIX_ACL_ACCESS; name_len = sizeof(XATTR_NAME_POSIX_ACL_ACCESS) - 1; -- cgit v1.2.3 From 66019837a5563e1f80a4228b7d110d8c52bfdd8b Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 22 Sep 2021 18:50:58 +0300 Subject: fs/ntfs3: Refactoring lock in ntfs_init_acl This is possible because of moving lock into ntfs_create_inode. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 55 ++++++++++++++----------------------------------------- 1 file changed, 14 insertions(+), 41 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 59ec5e61a239..83bbee277e12 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -693,54 +693,27 @@ int ntfs_init_acl(struct user_namespace *mnt_userns, struct inode *inode, struct posix_acl *default_acl, *acl; int err; - /* - * TODO: Refactoring lock. - * ni_lock(dir) ... -> posix_acl_create(dir,...) -> ntfs_get_acl -> ni_lock(dir) - */ - inode->i_default_acl = NULL; - - default_acl = ntfs_get_acl_ex(mnt_userns, dir, ACL_TYPE_DEFAULT, 1); - - if (!default_acl || default_acl == ERR_PTR(-EOPNOTSUPP)) { - inode->i_mode &= ~current_umask(); - err = 0; - goto out; - } - - if (IS_ERR(default_acl)) { - err = PTR_ERR(default_acl); - goto out; - } - - acl = default_acl; - err = __posix_acl_create(&acl, GFP_NOFS, &inode->i_mode); - if (err < 0) - goto out1; - if (!err) { - posix_acl_release(acl); - acl = NULL; - } - - if (!S_ISDIR(inode->i_mode)) { - posix_acl_release(default_acl); - default_acl = NULL; - } + err = posix_acl_create(dir, &inode->i_mode, &default_acl, &acl); + if (err) + return err; - if (default_acl) + if (default_acl) { err = ntfs_set_acl_ex(mnt_userns, inode, default_acl, ACL_TYPE_DEFAULT, 1); + posix_acl_release(default_acl); + } else { + inode->i_default_acl = NULL; + } if (!acl) inode->i_acl = NULL; - else if (!err) - err = ntfs_set_acl_ex(mnt_userns, inode, acl, ACL_TYPE_ACCESS, - 1); - - posix_acl_release(acl); -out1: - posix_acl_release(default_acl); + else { + if (!err) + err = ntfs_set_acl_ex(mnt_userns, inode, acl, + ACL_TYPE_ACCESS, 1); + posix_acl_release(acl); + } -out: return err; } #endif -- cgit v1.2.3 From a153d317168aa3d61a204fadc85bac3995381d33 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 16 Sep 2021 18:13:39 +0300 Subject: arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding Change pm8150 to use the qcom,pm8998-pon compatible string for the pon in order to pass reboot mode properly. Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file") Signed-off-by: Dmitry Baryshkov Tested-by: Amit Pundir Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index c566a64b1373..00385b1fd358 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -48,7 +48,7 @@ #size-cells = <0>; pon: power-on@800 { - compatible = "qcom,pm8916-pon"; + compatible = "qcom,pm8998-pon"; reg = <0x0800>; pon_pwrkey: pwrkey { -- cgit v1.2.3 From c5c24373ad0cb412002fe543683eab34189ec5ba Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 16 Sep 2021 18:13:40 +0300 Subject: arm64: dts: qcom: pm8150: specify reboot mode magics Specify recovery and bootloader magic values to be programmed by the qcom-pon driver. This allows the bootloader to handle reboot-to-bootloader functionality. Signed-off-by: Dmitry Baryshkov Tested-by: Amit Pundir Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 00385b1fd358..0df76f7b1cc1 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -50,6 +50,8 @@ pon: power-on@800 { compatible = "qcom,pm8998-pon"; reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pon_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; -- cgit v1.2.3 From 30b83220aa009b8654f17a8ad6cf8b08959110f2 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 16 Sep 2021 18:13:41 +0300 Subject: arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes Enable powerkey and resin nodes to let the board handle POWER and Volume- keys properly. Signed-off-by: Dmitry Baryshkov Tested-by: Amit Pundir Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 8ac96f8e79d4..28d5b5528516 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -804,6 +804,16 @@ }; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + &qupv3_id_0 { status = "okay"; }; -- cgit v1.2.3 From 1878f4b7ec9ed013da8a7efb63fed1fbae0215ae Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 24 Aug 2021 12:34:35 +0800 Subject: arm64: dts: qcom: sdm630: Add missing a2noc qos clocks It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Fixes: 045547a02252 ("arm64: dts: qcom: sdm630: Add interconnect provider nodes") Signed-off-by: Shawn Guo Acked-by: Georgi Djakov Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210824043435.23190-4-shawn.guo@linaro.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9153e6616ba4..9c7f87e42fcc 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -654,9 +654,20 @@ compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; }; mnoc: interconnect@1745000 { -- cgit v1.2.3 From 42de956ca7e5f6c47048dde640f797e783b23198 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 21 Sep 2021 09:11:59 -0300 Subject: vfio/ap_ops: Add missed vfio_uninit_group_dev() Without this call an xarray entry is leaked when the vfio_ap device is unprobed. It was missed when the below patch was rebased across the dev_set patch. Keep the remove function in the same order as the error unwind in probe. Fixes: eb0feefd4c02 ("vfio/ap_ops: Convert to use vfio_register_group_dev()") Reviewed-by: Christoph Hellwig Tested-by: Tony Krowiak Signed-off-by: Jason Gunthorpe Reviewed-by: Tony Krowiak Link: https://lore.kernel.org/r/0-v3-f9b50340cdbb+e4-ap_uninit_jgg@nvidia.com Signed-off-by: Alex Williamson --- drivers/s390/crypto/vfio_ap_ops.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c index 118939a7729a..623d5269a52c 100644 --- a/drivers/s390/crypto/vfio_ap_ops.c +++ b/drivers/s390/crypto/vfio_ap_ops.c @@ -361,6 +361,7 @@ err_list: mutex_lock(&matrix_dev->lock); list_del(&matrix_mdev->node); mutex_unlock(&matrix_dev->lock); + vfio_uninit_group_dev(&matrix_mdev->vdev); kfree(matrix_mdev); err_dec_available: atomic_inc(&matrix_dev->available_instances); @@ -376,9 +377,10 @@ static void vfio_ap_mdev_remove(struct mdev_device *mdev) mutex_lock(&matrix_dev->lock); vfio_ap_mdev_reset_queues(matrix_mdev); list_del(&matrix_mdev->node); + mutex_unlock(&matrix_dev->lock); + vfio_uninit_group_dev(&matrix_mdev->vdev); kfree(matrix_mdev); atomic_inc(&matrix_dev->available_instances); - mutex_unlock(&matrix_dev->lock); } static ssize_t name_show(struct mdev_type *mtype, -- cgit v1.2.3 From 87c1696655787895689618c8b63c5efe66b8f2ab Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 21 Sep 2021 08:24:57 -0600 Subject: io-wq: ensure we exit if thread group is exiting Dave reports that a coredumping workload gets stuck in 5.15-rc2, and identified the culprit in the Fixes line below. The problem is that relying solely on fatal_signal_pending() to gate whether to exit or not fails miserably if a process gets eg SIGILL sent. Don't exclusively rely on fatal signals, also check if the thread group is exiting. Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals") Reported-by: Dave Chinner Signed-off-by: Jens Axboe --- fs/io-wq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/io-wq.c b/fs/io-wq.c index c2e0e8e80949..c2360cdc403d 100644 --- a/fs/io-wq.c +++ b/fs/io-wq.c @@ -584,7 +584,8 @@ loop: if (!get_signal(&ksig)) continue; - if (fatal_signal_pending(current)) + if (fatal_signal_pending(current) || + signal_group_exit(current->signal)) break; continue; } -- cgit v1.2.3 From bd99c71bd14072ce2920f6d0c2fe43df072c653c Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:36 +0800 Subject: io_uring: fix race between poll completion and cancel_hash insertion If poll arming and poll completion runs in parallel, there maybe races. For instance, run io_poll_add in iowq and io_poll_task_func in original context, then: iowq original context io_poll_add vfs_poll (interruption happens tw queued to original context) io_poll_task_func generate cqe del from cancel_hash[] if !poll.done insert to cancel_hash[] The entry left in cancel_hash[], similar case for fast poll. Fix it by set poll.done = true when del from cancel_hash[]. Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow") Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-2-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index e372d5b9f6dc..43530aae6180 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5337,10 +5337,8 @@ static bool __io_poll_complete(struct io_kiocb *req, __poll_t mask) } if (req->poll.events & EPOLLONESHOT) flags = 0; - if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) { - req->poll.done = true; + if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) flags = 0; - } if (flags & IORING_CQE_F_MORE) ctx->cq_extra++; @@ -5371,6 +5369,7 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked) if (done) { io_poll_remove_double(req); hash_del(&req->hash_node); + req->poll.done = true; } else { req->result = 0; add_wait_queue(req->poll.head, &req->poll.wait); @@ -5508,6 +5507,7 @@ static void io_async_task_func(struct io_kiocb *req, bool *locked) hash_del(&req->hash_node); io_poll_remove_double(req); + apoll->poll.done = true; spin_unlock(&ctx->completion_lock); if (!READ_ONCE(apoll->poll.canceled)) -- cgit v1.2.3 From a62682f92eedb41c1cd8290fa875a4b85624fb9a Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:37 +0800 Subject: io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow We should set EPOLLONESHOT if cqring_fill_event() returns false since io_poll_add() decides to put req or not by it. Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow") Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-3-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 43530aae6180..ac0c06d5c629 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5337,8 +5337,10 @@ static bool __io_poll_complete(struct io_kiocb *req, __poll_t mask) } if (req->poll.events & EPOLLONESHOT) flags = 0; - if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) + if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) { + req->poll.events |= EPOLLONESHOT; flags = 0; + } if (flags & IORING_CQE_F_MORE) ctx->cq_extra++; -- cgit v1.2.3 From 5b7aa38d86f348847a48f71e9ac7715406de900e Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:38 +0800 Subject: io_uring: fix potential req refcount underflow For multishot mode, there may be cases like: iowq original context io_poll_add _arm_poll() mask = vfs_poll() is not 0 if mask (2) io_poll_complete() compl_unlock (interruption happens tw queued to original context) io_poll_task_func() compl_lock (3) done = io_poll_complete() is true compl_unlock put req ref (1) if (poll->flags & EPOLLONESHOT) put req ref EPOLLONESHOT flag in (1) may be from (2) or (3), so there are multiple combinations that can cause ref underfow. Let's address it by: - check the return value in (2) as done - change (1) to if (done) in this way, we only do ref put in (1) if 'oneshot flag' is from (2) - do poll.done check in io_poll_task_func(), so that we won't put ref for the second time. Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-4-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index ac0c06d5c629..7707cdb7b372 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5367,6 +5367,10 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked) } else { bool done; + if (req->poll.done) { + spin_unlock(&ctx->completion_lock); + return; + } done = __io_poll_complete(req, req->result); if (done) { io_poll_remove_double(req); @@ -5830,6 +5834,7 @@ static int io_poll_add(struct io_kiocb *req, unsigned int issue_flags) struct io_ring_ctx *ctx = req->ctx; struct io_poll_table ipt; __poll_t mask; + bool done; ipt.pt._qproc = io_poll_queue_proc; @@ -5838,13 +5843,13 @@ static int io_poll_add(struct io_kiocb *req, unsigned int issue_flags) if (mask) { /* no async, we'd stolen it */ ipt.error = 0; - io_poll_complete(req, mask); + done = io_poll_complete(req, mask); } spin_unlock(&ctx->completion_lock); if (mask) { io_cqring_ev_posted(ctx); - if (poll->events & EPOLLONESHOT) + if (done) io_put_req(req); } return ipt.error; -- cgit v1.2.3 From 8bab4c09f24ec8d4a7a78ab343620f89d3a24804 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 07:12:27 -0600 Subject: io_uring: allow conditional reschedule for intensive iterators If we have a lot of threads and rings, the tctx list can get quite big. This is especially true if we keep creating new threads and rings. Likewise for the provided buffers list. Be nice and insert a conditional reschedule point while iterating the nodes for deletion. Link: https://lore.kernel.org/io-uring/00000000000064b6b405ccb41113@google.com/ Reported-by: syzbot+111d2a03f51f5ae73775@syzkaller.appspotmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 7707cdb7b372..ef3c94a55fbd 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -9173,8 +9173,10 @@ static void io_destroy_buffers(struct io_ring_ctx *ctx) struct io_buffer *buf; unsigned long index; - xa_for_each(&ctx->io_buffers, index, buf) + xa_for_each(&ctx->io_buffers, index, buf) { __io_remove_buffers(ctx, buf, index, -1U); + cond_resched(); + } } static void io_req_cache_free(struct list_head *list) @@ -9672,8 +9674,10 @@ static void io_uring_clean_tctx(struct io_uring_task *tctx) struct io_tctx_node *node; unsigned long index; - xa_for_each(&tctx->xa, index, node) + xa_for_each(&tctx->xa, index, node) { io_uring_del_tctx_node(index); + cond_resched(); + } if (wq) { /* * Must be after io_uring_del_task_file() (removes nodes under -- cgit v1.2.3 From 9990da93d2bf9892c2c14c958bef050d4e461a1a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 07:39:08 -0600 Subject: io_uring: put provided buffer meta data under memcg accounting For each provided buffer, we allocate a struct io_buffer to hold the data associated with it. As a large number of buffers can be provided, account that data with memcg. Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS") Signed-off-by: Jens Axboe --- fs/io_uring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index ef3c94a55fbd..01e49d01fe74 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4387,7 +4387,7 @@ static int io_add_buffers(struct io_provide_buf *pbuf, struct io_buffer **head) int i, bid = pbuf->bid; for (i = 0; i < pbuf->nbufs; i++) { - buf = kmalloc(sizeof(*buf), GFP_KERNEL); + buf = kmalloc(sizeof(*buf), GFP_KERNEL_ACCOUNT); if (!buf) break; -- cgit v1.2.3 From cdb31c29d397a8076d81fd1458d091c647ef94ba Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 08:43:54 -0600 Subject: io_uring: don't punt files update to io-wq unconditionally There's no reason to punt it unconditionally, we just need to ensure that the submit lock grabbing is conditional. Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe --- fs/io_uring.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 01e49d01fe74..c6139ace11fa 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -6340,19 +6340,16 @@ static int io_files_update(struct io_kiocb *req, unsigned int issue_flags) struct io_uring_rsrc_update2 up; int ret; - if (issue_flags & IO_URING_F_NONBLOCK) - return -EAGAIN; - up.offset = req->rsrc_update.offset; up.data = req->rsrc_update.arg; up.nr = 0; up.tags = 0; up.resv = 0; - mutex_lock(&ctx->uring_lock); + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); ret = __io_register_rsrc_update(ctx, IORING_RSRC_FILE, &up, req->rsrc_update.nr_args); - mutex_unlock(&ctx->uring_lock); + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); if (ret < 0) req_set_fail(req); -- cgit v1.2.3 From 9f3a2cb228c28606895d15f13b30d1f7402dc745 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 24 Sep 2021 17:14:48 +0100 Subject: io_uring: kill extra checks in io_write() We don't retry short writes and so we would never get to async setup in io_write() in that case. Thus ret2 > 0 is always false and iov_iter_advance() is never used. Apparently, the same is found by Coverity, which complains on the code. Fixes: cd65869512ab ("io_uring: use iov_iter state save/restore helpers") Reported-by: Dave Jones Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/5b33e61034748ef1022766efc0fb8854cfcf749c.1632500058.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index c6139ace11fa..2b3232d53e79 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3605,7 +3605,6 @@ static int io_write(struct io_kiocb *req, unsigned int issue_flags) iov_iter_save_state(iter, state); } req->result = iov_iter_count(iter); - ret2 = 0; /* Ensure we clear previously set non-block flag */ if (!force_nonblock) @@ -3670,8 +3669,6 @@ done: } else { copy_iov: iov_iter_restore(iter, state); - if (ret2 > 0) - iov_iter_advance(iter, ret2); ret = io_setup_async_rw(req, iovec, inline_vecs, iter, false); return ret ?: -EAGAIN; } -- cgit v1.2.3 From a647a524a46736786c95cdb553a070322ca096e3 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 24 Sep 2021 19:07:04 +0800 Subject: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. Reported-by: Yu Kuai Cc: tj@kernel.org Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/bio.c b/block/bio.c index 5df3dd282e40..a6fb6a0b4295 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1466,7 +1466,7 @@ again: if (!bio_integrity_endio(bio)) return; - if (bio->bi_bdev) + if (bio->bi_bdev && bio_flagged(bio, BIO_TRACKED)) rq_qos_done_bio(bio->bi_bdev->bd_disk->queue, bio); if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) { -- cgit v1.2.3 From 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Thu, 23 Sep 2021 21:49:21 +0800 Subject: blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe --- kernel/trace/blktrace.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index c221e4c3f625..fa91f398f28b 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1605,6 +1605,14 @@ static int blk_trace_remove_queue(struct request_queue *q) if (bt == NULL) return -EINVAL; + if (bt->trace_state == Blktrace_running) { + bt->trace_state = Blktrace_stopped; + spin_lock_irq(&running_trace_lock); + list_del_init(&bt->running_list); + spin_unlock_irq(&running_trace_lock); + relay_flush(bt->rchan); + } + put_probe_ref(); synchronize_rcu(); blk_trace_free(bt); -- cgit v1.2.3 From f278eb3d8178f9c31f8dfad7e91440e603dd7f1a Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 23 Sep 2021 10:37:51 +0800 Subject: block: hold ->invalidate_lock in blkdev_fallocate When running ->fallocate(), blkdev_fallocate() should hold mapping->invalidate_lock to prevent page cache from being accessed, otherwise stale data may be read in page cache. Without this patch, blktests block/009 fails sometimes. With this patch, block/009 can pass always. Also as Jan pointed out, no pages can be created in the discarded area while you are holding the invalidate_lock, so remove the 2nd truncate_bdev_range(). Cc: Jan Kara Signed-off-by: Ming Lei Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/fops.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/block/fops.c b/block/fops.c index ffce6f6c68dd..1e970c247e0e 100644 --- a/block/fops.c +++ b/block/fops.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "blk.h" static struct inode *bdev_file_inode(struct file *file) @@ -553,7 +554,8 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to) static long blkdev_fallocate(struct file *file, int mode, loff_t start, loff_t len) { - struct block_device *bdev = I_BDEV(bdev_file_inode(file)); + struct inode *inode = bdev_file_inode(file); + struct block_device *bdev = I_BDEV(inode); loff_t end = start + len - 1; loff_t isize; int error; @@ -580,10 +582,12 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start, if ((start | len) & (bdev_logical_block_size(bdev) - 1)) return -EINVAL; + filemap_invalidate_lock(inode->i_mapping); + /* Invalidate the page cache, including dirty pages. */ error = truncate_bdev_range(bdev, file->f_mode, start, end); if (error) - return error; + goto fail; switch (mode) { case FALLOC_FL_ZERO_RANGE: @@ -600,17 +604,12 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start, GFP_KERNEL, 0); break; default: - return -EOPNOTSUPP; + error = -EOPNOTSUPP; } - if (error) - return error; - /* - * Invalidate the page cache again; if someone wandered in and dirtied - * a page, we just discard it - userspace has no way of knowing whether - * the write happened before or after discard completing... - */ - return truncate_bdev_range(bdev, file->f_mode, start, end); + fail: + filemap_invalidate_unlock(inode->i_mapping); + return error; } const struct file_operations def_blk_fops = { -- cgit v1.2.3 From a295aef603e109a47af355477326bd41151765b6 Mon Sep 17 00:00:00 2001 From: Zheng Liang Date: Fri, 24 Sep 2021 09:16:27 +0800 Subject: ovl: fix missing negative dentry check in ovl_rename() The following reproducer mkdir lower upper work merge touch lower/old touch lower/new mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge rm merge/new mv merge/old merge/new & unlink upper/new may result in this race: PROCESS A: rename("merge/old", "merge/new"); overwrite=true,ovl_lower_positive(old)=true, ovl_dentry_is_whiteout(new)=true -> flags |= RENAME_EXCHANGE PROCESS B: unlink("upper/new"); PROCESS A: lookup newdentry in new_upperdir call vfs_rename() with negative newdentry and RENAME_EXCHANGE Fix by adding the missing check for negative newdentry. Signed-off-by: Zheng Liang Fixes: e9be9d5e76e3 ("overlay filesystem") Cc: # v3.18 Signed-off-by: Miklos Szeredi --- fs/overlayfs/dir.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index 1fefb2b8960e..93c7c267de93 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -1219,9 +1219,13 @@ static int ovl_rename(struct user_namespace *mnt_userns, struct inode *olddir, goto out_dput; } } else { - if (!d_is_negative(newdentry) && - (!new_opaque || !ovl_is_whiteout(newdentry))) - goto out_dput; + if (!d_is_negative(newdentry)) { + if (!new_opaque || !ovl_is_whiteout(newdentry)) + goto out_dput; + } else { + if (flags & RENAME_EXCHANGE) + goto out_dput; + } } if (olddentry == trap) -- cgit v1.2.3 From 7df778be2f61e1a23002d1f2f5d6aaf702771eb8 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 24 Sep 2021 20:04:29 +0100 Subject: io_uring: make OP_CLOSE consistent with direct open From recently open/accept are now able to manipulate fixed file table, but it's inconsistent that close can't. Close the gap, keep API same as with open/accept, i.e. via sqe->file_slot. Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 2b3232d53e79..82f867983bb3 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -502,6 +502,7 @@ struct io_poll_update { struct io_close { struct file *file; int fd; + u32 file_slot; }; struct io_timeout_data { @@ -1098,6 +1099,8 @@ static int io_req_prep_async(struct io_kiocb *req); static int io_install_fixed_file(struct io_kiocb *req, struct file *file, unsigned int issue_flags, u32 slot_index); +static int io_close_fixed(struct io_kiocb *req, unsigned int issue_flags); + static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer); static struct kmem_cache *req_cachep; @@ -4591,12 +4594,16 @@ static int io_close_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; if (sqe->ioprio || sqe->off || sqe->addr || sqe->len || - sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in) + sqe->rw_flags || sqe->buf_index) return -EINVAL; if (req->flags & REQ_F_FIXED_FILE) return -EBADF; req->close.fd = READ_ONCE(sqe->fd); + req->close.file_slot = READ_ONCE(sqe->file_index); + if (req->close.file_slot && req->close.fd) + return -EINVAL; + return 0; } @@ -4608,6 +4615,11 @@ static int io_close(struct io_kiocb *req, unsigned int issue_flags) struct file *file = NULL; int ret = -EBADF; + if (req->close.file_slot) { + ret = io_close_fixed(req, issue_flags); + goto err; + } + spin_lock(&files->file_lock); fdt = files_fdtable(files); if (close->fd >= fdt->max_fds) { @@ -8401,6 +8413,44 @@ err: return ret; } +static int io_close_fixed(struct io_kiocb *req, unsigned int issue_flags) +{ + unsigned int offset = req->close.file_slot - 1; + struct io_ring_ctx *ctx = req->ctx; + struct io_fixed_file *file_slot; + struct file *file; + int ret, i; + + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + ret = -ENXIO; + if (unlikely(!ctx->file_data)) + goto out; + ret = -EINVAL; + if (offset >= ctx->nr_user_files) + goto out; + ret = io_rsrc_node_switch_start(ctx); + if (ret) + goto out; + + i = array_index_nospec(offset, ctx->nr_user_files); + file_slot = io_fixed_file_slot(&ctx->file_table, i); + ret = -EBADF; + if (!file_slot->file_ptr) + goto out; + + file = (struct file *)(file_slot->file_ptr & FFS_MASK); + ret = io_queue_rsrc_removal(ctx->file_data, offset, ctx->rsrc_node, file); + if (ret) + goto out; + + file_slot->file_ptr = 0; + io_rsrc_node_switch(ctx, ctx->file_data); + ret = 0; +out: + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + return ret; +} + static int __io_sqe_files_update(struct io_ring_ctx *ctx, struct io_uring_rsrc_update2 *up, unsigned nr_args) -- cgit v1.2.3 From 09540fa337196be20e9f0241652364f09275d374 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Thu, 16 Sep 2021 17:51:26 -0500 Subject: clk: socfpga: agilex: fix duplicate s2f_user0_clk Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define. Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/socfpga/clk-agilex.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c index 242e94c0cf8a..bf8cd928c228 100644 --- a/drivers/clk/socfpga/clk-agilex.c +++ b/drivers/clk/socfpga/clk-agilex.c @@ -165,13 +165,6 @@ static const struct clk_parent_data mpu_mux[] = { .name = "boot_clk", }, }; -static const struct clk_parent_data s2f_usr0_mux[] = { - { .fw_name = "f2s-free-clk", - .name = "f2s-free-clk", }, - { .fw_name = "boot_clk", - .name = "boot_clk", }, -}; - static const struct clk_parent_data emac_mux[] = { { .fw_name = "emaca_free_clk", .name = "emaca_free_clk", }, @@ -312,8 +305,6 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 4, 0x44, 28, 1, 0, 0, 0}, { AGILEX_CS_TIMER_CLK, "cs_timer_clk", NULL, noc_mux, ARRAY_SIZE(noc_mux), 0, 0x24, 5, 0, 0, 0, 0x30, 1, 0}, - { AGILEX_S2F_USER0_CLK, "s2f_user0_clk", NULL, s2f_usr0_mux, ARRAY_SIZE(s2f_usr0_mux), 0, 0x24, - 6, 0, 0, 0, 0, 0, 0}, { AGILEX_EMAC0_CLK, "emac0_clk", NULL, emac_mux, ARRAY_SIZE(emac_mux), 0, 0x7C, 0, 0, 0, 0, 0x94, 26, 0}, { AGILEX_EMAC1_CLK, "emac1_clk", NULL, emac_mux, ARRAY_SIZE(emac_mux), 0, 0x7C, -- cgit v1.2.3 From acfa299a4a63a58e5e81a87cb16798f20d35f7d7 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Fri, 24 Sep 2021 15:43:20 -0700 Subject: mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable() Commit fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages") changed the return value of __get_hwpoison_page() to retry for transiently unhandlable cases. However, __get_hwpoison_page() currently fails to properly judge buddy pages as handlable, so hard/soft offline for buddy pages always fail as "unhandlable page". This is totally regrettable. So let's add is_free_buddy_page() in HWPoisonHandlable(), so that __get_hwpoison_page() returns different return values between buddy pages and unhandlable pages as intended. Link: https://lkml.kernel.org/r/20210909004131.163221-1-naoya.horiguchi@linux.dev Fixes: fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages") Signed-off-by: Naoya Horiguchi Acked-by: David Hildenbrand Reviewed-by: Yang Shi Cc: Tony Luck Cc: Oscar Salvador Cc: Mike Kravetz Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 54879c339024..41901c7bb58f 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1126,7 +1126,7 @@ static int page_action(struct page_state *ps, struct page *p, */ static inline bool HWPoisonHandlable(struct page *page) { - return PageLRU(page) || __PageMovable(page); + return PageLRU(page) || __PageMovable(page) || is_free_buddy_page(page); } static int __get_hwpoison_page(struct page *page) -- cgit v1.2.3 From fa360beac4b62d54879a88b182afef4b369c9700 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Fri, 24 Sep 2021 15:43:23 -0700 Subject: kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is checked for instrumentation-based modes. However, if HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected. To fix, also make the software modes depend on CC_HAS_WORKING_NOSANITIZE_ADDRESS. Link: https://lkml.kernel.org/r/20210910084240.1215803-1-elver@google.com Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS") Signed-off-by: Marco Elver Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Aleksandr Nogikh Cc: Taras Madan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 1e2d10f86011..cdc842d090db 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -66,6 +66,7 @@ choice config KASAN_GENERIC bool "Generic mode" depends on HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC + depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS select SLUB_DEBUG if SLUB select CONSTRUCTORS help @@ -86,6 +87,7 @@ config KASAN_GENERIC config KASAN_SW_TAGS bool "Software tag-based mode" depends on HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS + depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS select SLUB_DEBUG if SLUB select CONSTRUCTORS help -- cgit v1.2.3 From 892ab4bbd063cfe7f6bbb183e6be69d9907a61de Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Fri, 24 Sep 2021 15:43:26 -0700 Subject: mm/damon: don't use strnlen() with known-bogus source length gcc knows the true length too, and rightfully complains. Link: https://lkml.kernel.org/r/20210912204447.10427-1-kilobyte@angband.pl Signed-off-by: Adam Borowski Cc: SeongJae Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/damon/dbgfs-test.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/mm/damon/dbgfs-test.h b/mm/damon/dbgfs-test.h index 930e83bceef0..4eddcfa73996 100644 --- a/mm/damon/dbgfs-test.h +++ b/mm/damon/dbgfs-test.h @@ -20,27 +20,27 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) ssize_t nr_integers = 0, i; question = "123"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers); KUNIT_EXPECT_EQ(test, 123ul, answers[0]); kfree(answers); question = "123abc"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers); KUNIT_EXPECT_EQ(test, 123ul, answers[0]); kfree(answers); question = "a123"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); question = "12 35"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers); for (i = 0; i < nr_integers; i++) @@ -48,7 +48,7 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = "12 35 46"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)3, nr_integers); for (i = 0; i < nr_integers; i++) @@ -56,7 +56,7 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = "12 35 abc 46"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers); for (i = 0; i < 2; i++) @@ -64,13 +64,13 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = ""; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); question = "\n"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); -- cgit v1.2.3 From 867050247e295cf20fce046a92a7e6491fcfe066 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 24 Sep 2021 15:43:29 -0700 Subject: xtensa: increase size of gcc stack frame check xtensa frame size is larger than the frame size for almost all other architectures. This results in more than 50 "the frame size of is larger than 1024 bytes" errors when trying to build xtensa:allmodconfig. Increase frame size for xtensa to 1536 bytes to avoid compile errors due to frame size limits. Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck Reviewed-by: Max Filippov Cc: Chris Zankel Cc: David Laight Cc: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d566f601780f..2a9b6dcdac4f 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -346,7 +346,7 @@ config FRAME_WARN int "Warn for stack frames larger than" range 0 8192 default 2048 if GCC_PLUGIN_LATENT_ENTROPY - default 1536 if (!64BIT && PARISC) + default 1536 if (!64BIT && (PARISC || XTENSA)) default 1024 if (!64BIT && !PARISC) default 2048 if 64BIT help -- cgit v1.2.3 From de6ee659684b1a2b149e0780d3c5e8032f3647d6 Mon Sep 17 00:00:00 2001 From: Liu Yuntao Date: Fri, 24 Sep 2021 15:43:32 -0700 Subject: mm/shmem.c: fix judgment error in shmem_is_huge() In the case of SHMEM_HUGE_WITHIN_SIZE, the page index is not rounded up correctly. When the page index points to the first page in a huge page, round_up() cannot bring it to the end of the huge page, but to the end of the previous one. An example: HPAGE_PMD_NR on my machine is 512(2 MB huge page size). After allcoating a 3000 KB buffer, I access it at location 2050 KB. In shmem_is_huge(), the corresponding index happens to be 512. After rounded up by HPAGE_PMD_NR, it will still be 512 which is smaller than i_size, and shmem_is_huge() will return true. As a result, my buffer takes an additional huge page, and that shouldn't happen when shmem_enabled is set to within_size. Link: https://lkml.kernel.org/r/20210909032007.18353-1-liuyuntao10@huawei.com Fixes: f3f0e1d2150b2b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Liu Yuntao Acked-by: Kirill A. Shutemov Acked-by: Hugh Dickins Cc: wuxu.wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/shmem.c b/mm/shmem.c index 88742953532c..b5860f4a2738 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -490,9 +490,9 @@ bool shmem_is_huge(struct vm_area_struct *vma, case SHMEM_HUGE_ALWAYS: return true; case SHMEM_HUGE_WITHIN_SIZE: - index = round_up(index, HPAGE_PMD_NR); + index = round_up(index + 1, HPAGE_PMD_NR); i_size = round_up(i_size_read(inode), PAGE_SIZE); - if (i_size >= HPAGE_PMD_SIZE && (i_size >> PAGE_SHIFT) >= index) + if (i_size >> PAGE_SHIFT >= index) return true; fallthrough; case SHMEM_HUGE_ADVISE: -- cgit v1.2.3 From 9c0f0a03e386f4e1df33db676401547e1b7800c6 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Fri, 24 Sep 2021 15:43:35 -0700 Subject: ocfs2: drop acl cache for directories too ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlmglue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 359524b7341f..801e60bab955 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3951,7 +3951,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, oi = OCFS2_I(inode); oi->ip_dir_lock_gen++; mlog(0, "generation: %u\n", oi->ip_dir_lock_gen); - goto out; + goto out_forget; } if (!S_ISREG(inode->i_mode)) @@ -3982,6 +3982,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, filemap_fdatawait(mapping); } +out_forget: forget_all_cached_acls(inode); out: -- cgit v1.2.3 From d09c38726c78effaf910a1e3f31e247b5b031d56 Mon Sep 17 00:00:00 2001 From: Miles Chen Date: Fri, 24 Sep 2021 15:43:38 -0700 Subject: scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error Fix the following build failure reported in [1] by adding a conditional definition of EM_RISCV in order to allow cross-compilation on machines which do not have EM_RISCV definition in their host. scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV' EM_RISCV was added to in glibc 2.24 so builds on systems with glibc headers < 2.24 should show this error. [mkubecek@suse.cz: changelog addition] Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ [1] Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com Fixes: 54fed35fd393 ("riscv: Enable BUILDTIME_TABLE_SORT") Signed-off-by: Miles Chen Reported-by: Stefan Wahren Tested-by: Stefan Wahren Reviewed-by: Jisheng Zhang Cc: Michal Kubecek Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Markus Mayer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/sorttable.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/sorttable.c b/scripts/sorttable.c index f355869c65cd..6ee4fa882919 100644 --- a/scripts/sorttable.c +++ b/scripts/sorttable.c @@ -54,6 +54,10 @@ #define EM_ARCV2 195 #endif +#ifndef EM_RISCV +#define EM_RISCV 243 +#endif + static uint32_t (*r)(const uint32_t *); static uint16_t (*r2)(const uint16_t *); static uint64_t (*r8)(const uint64_t *); -- cgit v1.2.3 From ebaeab2fe87987cef28eb5ab174c42cd28594387 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 24 Sep 2021 15:43:41 -0700 Subject: tools/vm/page-types: remove dependency on opt_file for idle page tracking Idle page tracking can also be used for process address space, not only file mappings. Without this change, using with '-i' option for process address space encounters below errors reported. $ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ... Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c index 0517c744b04e..f62f10c988db 100644 --- a/tools/vm/page-types.c +++ b/tools/vm/page-types.c @@ -1331,7 +1331,7 @@ int main(int argc, char *argv[]) if (opt_list && opt_list_mapcnt) kpagecount_fd = checked_open(PROC_KPAGECOUNT, O_RDONLY); - if (opt_mark_idle && opt_file) + if (opt_mark_idle) page_idle_fd = checked_open(SYS_KERNEL_MM_PAGE_IDLE, O_RDWR); if (opt_list && opt_pid) -- cgit v1.2.3 From b7cd9fa5ccc392d9f2269edc4cb82508632c28da Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Fri, 24 Sep 2021 15:43:44 -0700 Subject: lib/zlib_inflate/inffast: check config in C to avoid unused function warning Building Linux for ppc64le with Ubuntu clang version 12.0.0-3ubuntu1~21.04.1 shows the warning below. arch/powerpc/boot/inffast.c:20:1: warning: unused function 'get_unaligned16' [-Wunused-function] get_unaligned16(const unsigned short *p) ^ 1 warning generated. Fix it by moving the check from the preprocessor to C, so the compiler sees the use. Link: https://lkml.kernel.org/r/20210920084332.5752-1-pmenzel@molgen.mpg.de Signed-off-by: Paul Menzel Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Cc: Nick Desaulniers Cc: Christophe Leroy Cc: Zhen Lei Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/zlib_inflate/inffast.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index f19c4fbe1be7..2843f9bb42ac 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -253,13 +253,12 @@ void inflate_fast(z_streamp strm, unsigned start) sfrom = (unsigned short *)(from); loops = len >> 1; - do -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS - *sout++ = *sfrom++; -#else - *sout++ = get_unaligned16(sfrom++); -#endif - while (--loops); + do { + if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)) + *sout++ = *sfrom++; + else + *sout++ = get_unaligned16(sfrom++); + } while (--loops); out = (unsigned char *)sout; from = (unsigned char *)sfrom; } else { /* dist == 1 or dist == 2 */ -- cgit v1.2.3 From 243418e3925d5b5b0657ae54c322d43035e97eed Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Fri, 24 Sep 2021 15:43:47 -0700 Subject: mm: fs: invalidate bh_lrus for only cold path The kernel test robot reported the regression of fio.write_iops[1] with commit 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration"). Since lru_add_drain is called frequently, invalidate bh_lrus there could increase bh_lrus cache miss ratio, which needs more IO in the end. This patch moves the bh_lrus invalidation from the hot path( e.g., zap_page_range, pagevec_release) to cold path(i.e., lru_add_drain_all, lru_cache_disable). Zhengjun Xing confirmed "I test the patch, the regression reduced to -2.9%" [1] https://lore.kernel.org/lkml/20210520083144.GD14190@xsang-OptiPlex-9020/ [2] 8cc621d2f45d, mm: fs: invalidate BH LRU during page migration Link: https://lkml.kernel.org/r/20210907212347.1977686-1-minchan@kernel.org Signed-off-by: Minchan Kim Reported-by: kernel test robot Reviewed-by: Chris Goldsworthy Tested-by: "Xing, Zhengjun" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 8 ++++++-- include/linux/buffer_head.h | 4 ++-- mm/swap.c | 19 ++++++++++++++++--- 3 files changed, 24 insertions(+), 7 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index ab7573d72dd7..c615387aedca 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1425,12 +1425,16 @@ void invalidate_bh_lrus(void) } EXPORT_SYMBOL_GPL(invalidate_bh_lrus); -void invalidate_bh_lrus_cpu(int cpu) +/* + * It's called from workqueue context so we need a bh_lru_lock to close + * the race with preemption/irq. + */ +void invalidate_bh_lrus_cpu(void) { struct bh_lru *b; bh_lru_lock(); - b = per_cpu_ptr(&bh_lrus, cpu); + b = this_cpu_ptr(&bh_lrus); __invalidate_bh_lrus(b); bh_lru_unlock(); } diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 6486d3c19463..36f33685c8c0 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -194,7 +194,7 @@ void __breadahead_gfp(struct block_device *, sector_t block, unsigned int size, struct buffer_head *__bread_gfp(struct block_device *, sector_t block, unsigned size, gfp_t gfp); void invalidate_bh_lrus(void); -void invalidate_bh_lrus_cpu(int cpu); +void invalidate_bh_lrus_cpu(void); bool has_bh_in_lru(int cpu, void *dummy); struct buffer_head *alloc_buffer_head(gfp_t gfp_flags); void free_buffer_head(struct buffer_head * bh); @@ -408,7 +408,7 @@ static inline int inode_has_buffers(struct inode *inode) { return 0; } static inline void invalidate_inode_buffers(struct inode *inode) {} static inline int remove_inode_buffers(struct inode *inode) { return 1; } static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; } -static inline void invalidate_bh_lrus_cpu(int cpu) {} +static inline void invalidate_bh_lrus_cpu(void) {} static inline bool has_bh_in_lru(int cpu, void *dummy) { return false; } #define buffer_heads_over_limit 0 diff --git a/mm/swap.c b/mm/swap.c index 897200d27dd0..af3cad4e5378 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -620,7 +620,6 @@ void lru_add_drain_cpu(int cpu) pagevec_lru_move_fn(pvec, lru_lazyfree_fn); activate_page_drain(cpu); - invalidate_bh_lrus_cpu(cpu); } /** @@ -703,6 +702,20 @@ void lru_add_drain(void) local_unlock(&lru_pvecs.lock); } +/* + * It's called from per-cpu workqueue context in SMP case so + * lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on + * the same cpu. It shouldn't be a problem in !SMP case since + * the core is only one and the locks will disable preemption. + */ +static void lru_add_and_bh_lrus_drain(void) +{ + local_lock(&lru_pvecs.lock); + lru_add_drain_cpu(smp_processor_id()); + local_unlock(&lru_pvecs.lock); + invalidate_bh_lrus_cpu(); +} + void lru_add_drain_cpu_zone(struct zone *zone) { local_lock(&lru_pvecs.lock); @@ -717,7 +730,7 @@ static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work); static void lru_add_drain_per_cpu(struct work_struct *dummy) { - lru_add_drain(); + lru_add_and_bh_lrus_drain(); } /* @@ -858,7 +871,7 @@ void lru_cache_disable(void) */ __lru_add_drain_all(true); #else - lru_add_drain(); + lru_add_and_bh_lrus_drain(); #endif } -- cgit v1.2.3 From a4ce73910427e960b2c7f4d83229153c327d0ee7 Mon Sep 17 00:00:00 2001 From: Weizhao Ouyang Date: Fri, 24 Sep 2021 15:43:50 -0700 Subject: mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN Sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN to migrate_reason_names. Link: https://lkml.kernel.org/r/20210921064553.293905-2-o451686892@gmail.com Fixes: 310253514bbf ("mm/migrate: rename migration reason MR_CMA to MR_CONTIG_RANGE") Fixes: d1e153fea2a8 ("mm/gup: migrate pinned pages out of movable zone") Signed-off-by: Weizhao Ouyang Reviewed-by: "Huang, Ying" Reviewed-by: John Hubbard Cc: Anshuman Khandual Cc: Michal Hocko Cc: Pavel Tatashin Cc: Yang Shi Cc: Zi Yan Cc: Dave Hansen Cc: Minchan Kim Cc: Mina Almasry Cc: "Matthew Wilcox (Oracle)" Cc: Oscar Salvador Cc: Wei Xu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/debug.c b/mm/debug.c index e73fe0a8ec3d..e61037cded98 100644 --- a/mm/debug.c +++ b/mm/debug.c @@ -24,7 +24,8 @@ const char *migrate_reason_names[MR_TYPES] = { "syscall_or_cpuset", "mempolicy_mbind", "numa_misplaced", - "cma", + "contig_range", + "longterm_pin", }; const struct trace_print_flags pageflag_names[] = { -- cgit v1.2.3 From 57ed7b4303a1c4d1885019fef03e6a5af2e8468a Mon Sep 17 00:00:00 2001 From: Weizhao Ouyang Date: Fri, 24 Sep 2021 15:43:53 -0700 Subject: mm/debug: sync up latest migrate_reason to migrate_reason_names Sync up MR_DEMOTION to migrate_reason_names and add a synch prompt. Link: https://lkml.kernel.org/r/20210921064553.293905-3-o451686892@gmail.com Fixes: 26aa2d199d6f ("mm/migrate: demote pages during reclaim") Signed-off-by: Weizhao Ouyang Reviewed-by: "Huang, Ying" Reviewed-by: John Hubbard Cc: Anshuman Khandual Cc: Michal Hocko Cc: Pavel Tatashin Cc: Yang Shi Cc: Zi Yan Cc: Dave Hansen Cc: Minchan Kim Cc: Mina Almasry Cc: "Matthew Wilcox (Oracle)" Cc: Oscar Salvador Cc: Wei Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/migrate.h | 6 +++++- mm/debug.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/migrate.h b/include/linux/migrate.h index 326250996b4e..c8077e936691 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -19,6 +19,11 @@ struct migration_target_control; */ #define MIGRATEPAGE_SUCCESS 0 +/* + * Keep sync with: + * - macro MIGRATE_REASON in include/trace/events/migrate.h + * - migrate_reason_names[MR_TYPES] in mm/debug.c + */ enum migrate_reason { MR_COMPACTION, MR_MEMORY_FAILURE, @@ -32,7 +37,6 @@ enum migrate_reason { MR_TYPES }; -/* In mm/debug.c; also keep sync with include/trace/events/migrate.h */ extern const char *migrate_reason_names[MR_TYPES]; #ifdef CONFIG_MIGRATION diff --git a/mm/debug.c b/mm/debug.c index e61037cded98..fae0f81ad831 100644 --- a/mm/debug.c +++ b/mm/debug.c @@ -26,6 +26,7 @@ const char *migrate_reason_names[MR_TYPES] = { "numa_misplaced", "contig_range", "longterm_pin", + "demotion", }; const struct trace_print_flags pageflag_names[] = { -- cgit v1.2.3 From e8e9f1e6327005be9656aa135aeb9dfdaf6b3032 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Sep 2021 15:43:57 -0700 Subject: sh: pgtable-3level: fix cast to pointer from integer of different size If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd is "unsigned long long", causing: In file included from arch/sh/include/asm/pgtable.h:13, from include/linux/pgtable.h:6, from include/linux/mm.h:33, from arch/sh/kernel/asm-offsets.c:14: arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable': arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 37 | return (pmd_t *)pud_val(pud); | ^ Fix this by adding an intermediate cast to "unsigned long", which is basically what the old code did before. Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be Fixes: 9cf6fa2458443118 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *") Signed-off-by: Geert Uytterhoeven Tested-by: Daniel Palmer Acked-by: Rob Landley Cc: Yoshinori Sato Cc: Rich Felker Cc: "Aneesh Kumar K . V" Cc: Jacopo Mondi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/asm/pgtable-3level.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h index 56bf35c2f29c..cdced80a7ffa 100644 --- a/arch/sh/include/asm/pgtable-3level.h +++ b/arch/sh/include/asm/pgtable-3level.h @@ -34,7 +34,7 @@ typedef struct { unsigned long long pmd; } pmd_t; static inline pmd_t *pud_pgtable(pud_t pud) { - return (pmd_t *)pud_val(pud); + return (pmd_t *)(unsigned long)pud_val(pud); } /* only used by the stubbed out hugetlb gup code, should never be called */ -- cgit v1.2.3 From 19532869feb9b0a97d17ddc14609d1e53a5b60db Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 24 Sep 2021 15:44:00 -0700 Subject: kasan: always respect CONFIG_KASAN_STACK Currently, the asan-stack parameter is only passed along if CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to be defined in Kconfig so that the value can be checked. In RISC-V's case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK is disabled, resulting in large stack warnings with allmodconfig: drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than] static int lb035q02_connect(struct omap_dss_device *dssdev) ^ 1 error generated. Ensure that the value of CONFIG_KASAN_STACK is always passed along to the compiler so that these warnings do not happen when CONFIG_KASAN_STACK is disabled. Link: https://github.com/ClangBuiltLinux/linux/issues/1453 References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org Signed-off-by: Nathan Chancellor Reviewed-by: Marco Elver Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Nick Desaulniers Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/Makefile.kasan | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan index 801c415bac59..b9e94c5e7097 100644 --- a/scripts/Makefile.kasan +++ b/scripts/Makefile.kasan @@ -33,10 +33,11 @@ else CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \ $(call cc-param,asan-globals=1) \ $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \ - $(call cc-param,asan-stack=$(stack_enable)) \ $(call cc-param,asan-instrument-allocas=1) endif +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable)) + endif # CONFIG_KASAN_GENERIC ifdef CONFIG_KASAN_SW_TAGS -- cgit v1.2.3 From 5c91c0e77b8f2681e2b269c8abb4c5acef434d5b Mon Sep 17 00:00:00 2001 From: Qi Zheng Date: Fri, 24 Sep 2021 15:44:03 -0700 Subject: mm/memory_failure: fix the missing pte_unmap() call The paired pte_unmap() call is missing before the dev_pagemap_mapping_shift() returns. So fix it. David says: "I guess this code never runs on 32bit / highmem, that's why we didn't notice so far". [akpm@linux-foundation.org: cleanup] Link: https://lkml.kernel.org/r/20210923122642.4999-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng Reviewed-by: David Hildenbrand Cc: Naoya Horiguchi Cc: Muchun Song Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 41901c7bb58f..3e6449f2102a 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -306,6 +306,7 @@ static unsigned long dev_pagemap_mapping_shift(struct page *page, struct vm_area_struct *vma) { unsigned long address = vma_address(page, vma); + unsigned long ret = 0; pgd_t *pgd; p4d_t *p4d; pud_t *pud; @@ -329,11 +330,10 @@ static unsigned long dev_pagemap_mapping_shift(struct page *page, if (pmd_devmap(*pmd)) return PMD_SHIFT; pte = pte_offset_map(pmd, address); - if (!pte_present(*pte)) - return 0; - if (pte_devmap(*pte)) - return PAGE_SHIFT; - return 0; + if (pte_present(*pte) && pte_devmap(*pte)) + ret = PAGE_SHIFT; + pte_unmap(pte); + return ret; } /* -- cgit v1.2.3 From bcbda81020c3ee77e2c098cadf3e84f99ca3de17 Mon Sep 17 00:00:00 2001 From: Chen Jun Date: Fri, 24 Sep 2021 15:44:06 -0700 Subject: mm: fix uninitialized use in overcommit_policy_handler We get an unexpected value of /proc/sys/vm/overcommit_memory after running the following program: int main() { int fd = open("/proc/sys/vm/overcommit_memory", O_RDWR); write(fd, "1", 1); write(fd, "2", 1); close(fd); } write(fd, "2", 1) will pass *ppos = 1 to proc_dointvec_minmax. proc_dointvec_minmax will return 0 without setting new_policy. t.data = &new_policy; ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos) -->do_proc_dointvec -->__do_proc_dointvec if (write) { if (proc_first_pos_non_zero_ignore(ppos, table)) goto out; sysctl_overcommit_memory = new_policy; so sysctl_overcommit_memory will be set to an uninitialized value. Check whether new_policy has been changed by proc_dointvec_minmax. Link: https://lkml.kernel.org/r/20210923020524.13289-1-chenjun102@huawei.com Fixes: 56f3547bfa4d ("mm: adjust vm_committed_as_batch according to vm overcommit policy") Signed-off-by: Chen Jun Acked-by: Michal Hocko Reviewed-by: Feng Tang Reviewed-by: Kefeng Wang Cc: Rui Xiang Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/util.c b/mm/util.c index 499b6b5767ed..bacabe446906 100644 --- a/mm/util.c +++ b/mm/util.c @@ -787,7 +787,7 @@ int overcommit_policy_handler(struct ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { struct ctl_table t; - int new_policy; + int new_policy = -1; int ret; /* @@ -805,7 +805,7 @@ int overcommit_policy_handler(struct ctl_table *table, int write, void *buffer, t = *table; t.data = &new_policy; ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos); - if (ret) + if (ret || new_policy == -1) return ret; mm_compute_batch(new_policy); -- cgit v1.2.3 From 265fd1991c1db85fbabaad4946ca0e63e2ae688d Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Sat, 25 Sep 2021 00:06:16 +0900 Subject: ksmbd: use LOOKUP_BENEATH to prevent the out of share access instead of removing '..' in a given path, call kern_path with LOOKUP_BENEATH flag to prevent the out of share access. ran various test on this: smb2-cat-async smb://127.0.0.1/homes/../out_of_share smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share smbclient //127.0.0.1/homes -c "mkdir ../foo2" smbclient //127.0.0.1/homes -c "rename bar ../bar" Cc: Ronnie Sahlberg Cc: Ralph Boehme Tested-by: Steve French Tested-by: Namjae Jeon Acked-by: Namjae Jeon Signed-off-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/misc.c | 100 +++++++--------------------------- fs/ksmbd/misc.h | 7 +-- fs/ksmbd/smb2pdu.c | 74 ++++++++++--------------- fs/ksmbd/vfs.c | 156 ++++++++++++++++++++++++++++------------------------- fs/ksmbd/vfs.h | 9 +++- 5 files changed, 140 insertions(+), 206 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 3eac3c01749f..6a19f4bc692d 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -158,25 +158,21 @@ out: * Return : windows path string or error */ -char *convert_to_nt_pathname(char *filename, char *sharepath) +char *convert_to_nt_pathname(char *filename) { char *ab_pathname; - int len, name_len; - name_len = strlen(filename); - ab_pathname = kmalloc(name_len, GFP_KERNEL); - if (!ab_pathname) - return NULL; - - ab_pathname[0] = '\\'; - ab_pathname[1] = '\0'; + if (strlen(filename) == 0) { + ab_pathname = kmalloc(2, GFP_KERNEL); + ab_pathname[0] = '\\'; + ab_pathname[1] = '\0'; + } else { + ab_pathname = kstrdup(filename, GFP_KERNEL); + if (!ab_pathname) + return NULL; - len = strlen(sharepath); - if (!strncmp(filename, sharepath, len) && name_len != len) { - strscpy(ab_pathname, &filename[len], name_len); ksmbd_conv_path_to_windows(ab_pathname); } - return ab_pathname; } @@ -191,77 +187,19 @@ int get_nlink(struct kstat *st) return nlink; } -char *ksmbd_conv_path_to_unix(char *path) +void ksmbd_conv_path_to_unix(char *path) { - size_t path_len, remain_path_len, out_path_len; - char *out_path, *out_next; - int i, pre_dotdot_cnt = 0, slash_cnt = 0; - bool is_last; - strreplace(path, '\\', '/'); - path_len = strlen(path); - remain_path_len = path_len; - if (path_len == 0) - return ERR_PTR(-EINVAL); - - out_path = kzalloc(path_len + 2, GFP_KERNEL); - if (!out_path) - return ERR_PTR(-ENOMEM); - out_path_len = 0; - out_next = out_path; - - do { - char *name = path + path_len - remain_path_len; - char *next = strchrnul(name, '/'); - size_t name_len = next - name; - - is_last = !next[0]; - if (name_len == 2 && name[0] == '.' && name[1] == '.') { - pre_dotdot_cnt++; - /* handle the case that path ends with "/.." */ - if (is_last) - goto follow_dotdot; - } else { - if (pre_dotdot_cnt) { -follow_dotdot: - slash_cnt = 0; - for (i = out_path_len - 1; i >= 0; i--) { - if (out_path[i] == '/' && - ++slash_cnt == pre_dotdot_cnt + 1) - break; - } - - if (i < 0 && - slash_cnt != pre_dotdot_cnt) { - kfree(out_path); - return ERR_PTR(-EINVAL); - } - - out_next = &out_path[i+1]; - *out_next = '\0'; - out_path_len = i + 1; - - } - - if (name_len != 0 && - !(name_len == 1 && name[0] == '.') && - !(name_len == 2 && name[0] == '.' && name[1] == '.')) { - next[0] = '\0'; - sprintf(out_next, "%s/", name); - out_next += name_len + 1; - out_path_len += name_len + 1; - next[0] = '/'; - } - pre_dotdot_cnt = 0; - } +} - remain_path_len -= name_len + 1; - } while (!is_last); +void ksmbd_strip_last_slash(char *path) +{ + int len = strlen(path); - if (out_path_len > 0) - out_path[out_path_len-1] = '\0'; - path[path_len] = '\0'; - return out_path; + while (len && path[len - 1] == '/') { + path[len - 1] = '\0'; + len--; + } } void ksmbd_conv_path_to_windows(char *path) @@ -298,7 +236,7 @@ char *ksmbd_extract_sharename(char *treename) * * Return: converted name on success, otherwise NULL */ -char *convert_to_unix_name(struct ksmbd_share_config *share, char *name) +char *convert_to_unix_name(struct ksmbd_share_config *share, const char *name) { int no_slash = 0, name_len, path_len; char *new_name; diff --git a/fs/ksmbd/misc.h b/fs/ksmbd/misc.h index b7b10139ada2..253366bd0951 100644 --- a/fs/ksmbd/misc.h +++ b/fs/ksmbd/misc.h @@ -14,12 +14,13 @@ struct ksmbd_file; int match_pattern(const char *str, size_t len, const char *pattern); int ksmbd_validate_filename(char *filename); int parse_stream_name(char *filename, char **stream_name, int *s_type); -char *convert_to_nt_pathname(char *filename, char *sharepath); +char *convert_to_nt_pathname(char *filename); int get_nlink(struct kstat *st); -char *ksmbd_conv_path_to_unix(char *path); +void ksmbd_conv_path_to_unix(char *path); +void ksmbd_strip_last_slash(char *path); void ksmbd_conv_path_to_windows(char *path); char *ksmbd_extract_sharename(char *treename); -char *convert_to_unix_name(struct ksmbd_share_config *share, char *name); +char *convert_to_unix_name(struct ksmbd_share_config *share, const char *name); #define KSMBD_DIR_INFO_ALIGNMENT 8 struct ksmbd_dir_info; diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 0c49a0e887d3..761e12171dc4 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -634,7 +634,7 @@ static char * smb2_get_name(struct ksmbd_share_config *share, const char *src, const int maxlen, struct nls_table *local_nls) { - char *name, *norm_name, *unixname; + char *name; name = smb_strndup_from_utf16(src, maxlen, 1, local_nls); if (IS_ERR(name)) { @@ -642,23 +642,9 @@ smb2_get_name(struct ksmbd_share_config *share, const char *src, return name; } - /* change it to absolute unix name */ - norm_name = ksmbd_conv_path_to_unix(name); - if (IS_ERR(norm_name)) { - kfree(name); - return norm_name; - } - kfree(name); - - unixname = convert_to_unix_name(share, norm_name); - kfree(norm_name); - if (!unixname) { - pr_err("can not convert absolute name\n"); - return ERR_PTR(-ENOMEM); - } - - ksmbd_debug(SMB, "absolute name = %s\n", unixname); - return unixname; + ksmbd_conv_path_to_unix(name); + ksmbd_strip_last_slash(name); + return name; } int setup_async_work(struct ksmbd_work *work, void (*fn)(void **), void **arg) @@ -2352,7 +2338,7 @@ static int smb2_creat(struct ksmbd_work *work, struct path *path, char *name, return rc; } - rc = ksmbd_vfs_kern_path(name, 0, path, 0); + rc = ksmbd_vfs_kern_path(work, name, 0, path, 0); if (rc) { pr_err("cannot get linux path (%s), err = %d\n", name, rc); @@ -2427,7 +2413,7 @@ int smb2_open(struct ksmbd_work *work) struct oplock_info *opinfo; __le32 *next_ptr = NULL; int req_op_level = 0, open_flags = 0, may_flags = 0, file_info = 0; - int rc = 0, len = 0; + int rc = 0; int contxt_cnt = 0, query_disk_id = 0; int maximal_access_ctxt = 0, posix_ctxt = 0; int s_type = 0; @@ -2499,17 +2485,11 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } } else { - len = strlen(share->path); - ksmbd_debug(SMB, "share path len %d\n", len); - name = kmalloc(len + 1, GFP_KERNEL); + name = kstrdup("", GFP_KERNEL); if (!name) { - rsp->hdr.Status = STATUS_NO_MEMORY; rc = -ENOMEM; goto err_out1; } - - memcpy(name, share->path, len); - *(name + len) = '\0'; } req_op_level = req->RequestedOplockLevel; @@ -2632,7 +2612,7 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } - rc = ksmbd_vfs_kern_path(name, LOOKUP_NO_SYMLINKS, &path, 1); + rc = ksmbd_vfs_kern_path(work, name, LOOKUP_NO_SYMLINKS, &path, 1); if (!rc) { if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { /* @@ -2661,11 +2641,8 @@ int smb2_open(struct ksmbd_work *work) } if (rc) { - if (rc == -EACCES) { - ksmbd_debug(SMB, - "User does not have right permission\n"); + if (rc != -ENOENT) goto err_out; - } ksmbd_debug(SMB, "can not get linux path for %s, rc = %d\n", name, rc); rc = 0; @@ -3161,7 +3138,7 @@ err_out1: rsp->hdr.Status = STATUS_INVALID_PARAMETER; else if (rc == -EOPNOTSUPP) rsp->hdr.Status = STATUS_NOT_SUPPORTED; - else if (rc == -EACCES || rc == -ESTALE) + else if (rc == -EACCES || rc == -ESTALE || rc == -EXDEV) rsp->hdr.Status = STATUS_ACCESS_DENIED; else if (rc == -ENOENT) rsp->hdr.Status = STATUS_OBJECT_NAME_INVALID; @@ -4277,8 +4254,7 @@ static int get_file_all_info(struct ksmbd_work *work, return -EACCES; } - filename = convert_to_nt_pathname(fp->filename, - work->tcon->share_conf->path); + filename = convert_to_nt_pathname(fp->filename); if (!filename) return -ENOMEM; @@ -4733,7 +4709,7 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work, int rc = 0, len; int fs_infoclass_size = 0; - rc = ksmbd_vfs_kern_path(share->path, LOOKUP_NO_SYMLINKS, &path, 0); + rc = kern_path(share->path, LOOKUP_NO_SYMLINKS, &path); if (rc) { pr_err("cannot create vfs path\n"); return -EIO; @@ -5282,7 +5258,7 @@ static int smb2_rename(struct ksmbd_work *work, goto out; len = strlen(new_name); - if (new_name[len - 1] != '/') { + if (len > 0 && new_name[len - 1] != '/') { pr_err("not allow base filename in rename\n"); rc = -ESHARE; goto out; @@ -5310,11 +5286,14 @@ static int smb2_rename(struct ksmbd_work *work, } ksmbd_debug(SMB, "new name %s\n", new_name); - rc = ksmbd_vfs_kern_path(new_name, LOOKUP_NO_SYMLINKS, &path, 1); - if (rc) + rc = ksmbd_vfs_kern_path(work, new_name, LOOKUP_NO_SYMLINKS, &path, 1); + if (rc) { + if (rc != -ENOENT) + goto out; file_present = false; - else + } else { path_put(&path); + } if (ksmbd_share_veto_filename(share, new_name)) { rc = -ENOENT; @@ -5384,11 +5363,14 @@ static int smb2_create_link(struct ksmbd_work *work, } ksmbd_debug(SMB, "target name is %s\n", target_name); - rc = ksmbd_vfs_kern_path(link_name, LOOKUP_NO_SYMLINKS, &path, 0); - if (rc) + rc = ksmbd_vfs_kern_path(work, link_name, LOOKUP_NO_SYMLINKS, &path, 0); + if (rc) { + if (rc != -ENOENT) + goto out; file_present = false; - else + } else { path_put(&path); + } if (file_info->ReplaceIfExists) { if (file_present) { @@ -5548,7 +5530,7 @@ static int set_file_allocation_info(struct ksmbd_work *work, * inode size is retained by backup inode size. */ size = i_size_read(inode); - rc = ksmbd_vfs_truncate(work, NULL, fp, alloc_blks * 512); + rc = ksmbd_vfs_truncate(work, fp, alloc_blks * 512); if (rc) { pr_err("truncate failed! filename : %s, err %d\n", fp->filename, rc); @@ -5585,7 +5567,7 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, if (inode->i_sb->s_magic != MSDOS_SUPER_MAGIC) { ksmbd_debug(SMB, "filename : %s truncated to newsize %lld\n", fp->filename, newsize); - rc = ksmbd_vfs_truncate(work, NULL, fp, newsize); + rc = ksmbd_vfs_truncate(work, fp, newsize); if (rc) { ksmbd_debug(SMB, "truncate failed! filename : %s err %d\n", fp->filename, rc); @@ -5862,7 +5844,7 @@ int smb2_set_info(struct ksmbd_work *work) return 0; err_out: - if (rc == -EACCES || rc == -EPERM) + if (rc == -EACCES || rc == -EPERM || rc == -EXDEV) rsp->hdr.Status = STATUS_ACCESS_DENIED; else if (rc == -EINVAL) rsp->hdr.Status = STATUS_INVALID_PARAMETER; diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c index 3733e4944c1d..b41954294d38 100644 --- a/fs/ksmbd/vfs.c +++ b/fs/ksmbd/vfs.c @@ -19,6 +19,8 @@ #include #include +#include "../internal.h" /* for vfs_path_lookup */ + #include "glob.h" #include "oplock.h" #include "connection.h" @@ -44,7 +46,6 @@ static char *extract_last_component(char *path) p++; } else { p = NULL; - pr_err("Invalid path %s\n", path); } return p; } @@ -155,7 +156,7 @@ int ksmbd_vfs_query_maximal_access(struct user_namespace *user_ns, /** * ksmbd_vfs_create() - vfs helper for smb create file * @work: work - * @name: file name + * @name: file name that is relative to share * @mode: file create mode * * Return: 0 on success, otherwise error @@ -166,7 +167,8 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_NO_SYMLINKS); + dentry = ksmbd_vfs_kern_path_create(work, name, + LOOKUP_NO_SYMLINKS, &path); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -ENOENT) @@ -191,7 +193,7 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) /** * ksmbd_vfs_mkdir() - vfs helper for smb create directory * @work: work - * @name: directory name + * @name: directory name that is relative to share * @mode: directory create mode * * Return: 0 on success, otherwise error @@ -203,8 +205,9 @@ int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, - LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY); + dentry = ksmbd_vfs_kern_path_create(work, name, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &path); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -EEXIST) @@ -579,7 +582,7 @@ int ksmbd_vfs_fsync(struct ksmbd_work *work, u64 fid, u64 p_id) /** * ksmbd_vfs_remove_file() - vfs helper for smb rmdir or unlink - * @name: absolute directory or file name + * @name: directory or file name that is relative to share * * Return: 0 on success, otherwise error */ @@ -593,7 +596,7 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name) if (ksmbd_override_fsids(work)) return -ENOMEM; - err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); + err = ksmbd_vfs_kern_path(work, name, LOOKUP_NO_SYMLINKS, &path, false); if (err) { ksmbd_debug(VFS, "can't get %s, err %d\n", name, err); ksmbd_revert_fsids(work); @@ -638,7 +641,7 @@ out_err: /** * ksmbd_vfs_link() - vfs helper for creating smb hardlink * @oldname: source file name - * @newname: hardlink name + * @newname: hardlink name that is relative to share * * Return: 0 on success, otherwise error */ @@ -659,8 +662,9 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, goto out1; } - dentry = kern_path_create(AT_FDCWD, newname, &newpath, - LOOKUP_NO_SYMLINKS | LOOKUP_REVAL); + dentry = ksmbd_vfs_kern_path_create(work, newname, + LOOKUP_NO_SYMLINKS | LOOKUP_REVAL, + &newpath); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); pr_err("path create err for %s, err %d\n", newname, err); @@ -781,14 +785,17 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, int err; dst_name = extract_last_component(newname); - if (!dst_name) - return -EINVAL; + if (!dst_name) { + dst_name = newname; + newname = ""; + } src_dent_parent = dget_parent(fp->filp->f_path.dentry); src_dent = fp->filp->f_path.dentry; - err = kern_path(newname, LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, - &dst_path); + err = ksmbd_vfs_kern_path(work, newname, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &dst_path, false); if (err) { ksmbd_debug(VFS, "Cannot get path for %s [%d]\n", newname, err); goto out; @@ -834,61 +841,43 @@ out: /** * ksmbd_vfs_truncate() - vfs helper for smb file truncate * @work: work - * @name: old filename * @fid: file id of old file * @size: truncate to given size * * Return: 0 on success, otherwise error */ -int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, +int ksmbd_vfs_truncate(struct ksmbd_work *work, struct ksmbd_file *fp, loff_t size) { - struct path path; int err = 0; + struct file *filp; - if (name) { - err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); - if (err) { - pr_err("cannot get linux path for %s, err %d\n", - name, err); - return err; - } - err = vfs_truncate(&path, size); - if (err) - pr_err("truncate failed for %s err %d\n", - name, err); - path_put(&path); - } else { - struct file *filp; - - filp = fp->filp; - - /* Do we need to break any of a levelII oplock? */ - smb_break_all_levII_oplock(work, fp, 1); + filp = fp->filp; - if (!work->tcon->posix_extensions) { - struct inode *inode = file_inode(filp); + /* Do we need to break any of a levelII oplock? */ + smb_break_all_levII_oplock(work, fp, 1); - if (size < inode->i_size) { - err = check_lock_range(filp, size, - inode->i_size - 1, WRITE); - } else { - err = check_lock_range(filp, inode->i_size, - size - 1, WRITE); - } + if (!work->tcon->posix_extensions) { + struct inode *inode = file_inode(filp); - if (err) { - pr_err("failed due to lock\n"); - return -EAGAIN; - } + if (size < inode->i_size) { + err = check_lock_range(filp, size, + inode->i_size - 1, WRITE); + } else { + err = check_lock_range(filp, inode->i_size, + size - 1, WRITE); } - err = vfs_truncate(&filp->f_path, size); - if (err) - pr_err("truncate failed for filename : %s err %d\n", - fp->filename, err); + if (err) { + pr_err("failed due to lock\n"); + return -EAGAIN; + } } + err = vfs_truncate(&filp->f_path, size); + if (err) + pr_err("truncate failed for filename : %s err %d\n", + fp->filename, err); return err; } @@ -1206,22 +1195,25 @@ static int ksmbd_vfs_lookup_in_dir(struct path *dir, char *name, size_t namelen) /** * ksmbd_vfs_kern_path() - lookup a file and get path info - * @name: name of file for lookup + * @name: file path that is relative to share * @flags: lookup flags * @path: if lookup succeed, return path info * @caseless: caseless filename lookup * * Return: 0 on success, otherwise error */ -int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, - bool caseless) +int ksmbd_vfs_kern_path(struct ksmbd_work *work, char *name, + unsigned int flags, struct path *path, bool caseless) { + struct ksmbd_share_config *share_conf = work->tcon->share_conf; int err; - if (name[0] != '/') - return -EINVAL; - - err = kern_path(name, flags, path); + flags |= LOOKUP_BENEATH; + err = vfs_path_lookup(share_conf->vfs_path.dentry, + share_conf->vfs_path.mnt, + name, + flags, + path); if (!err) return 0; @@ -1235,11 +1227,10 @@ int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, return -ENOMEM; path_len = strlen(filepath); - remain_len = path_len - 1; + remain_len = path_len; - err = kern_path("/", flags, &parent); - if (err) - goto out; + parent = share_conf->vfs_path; + path_get(&parent); while (d_can_lookup(parent.dentry)) { char *filename = filepath + path_len - remain_len; @@ -1252,21 +1243,21 @@ int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, err = ksmbd_vfs_lookup_in_dir(&parent, filename, filename_len); - if (err) { - path_put(&parent); + path_put(&parent); + if (err) goto out; - } - path_put(&parent); next[0] = '\0'; - err = kern_path(filepath, flags, &parent); + err = vfs_path_lookup(share_conf->vfs_path.dentry, + share_conf->vfs_path.mnt, + filepath, + flags, + &parent); if (err) goto out; - - if (is_last) { - path->mnt = parent.mnt; - path->dentry = parent.dentry; + else if (is_last) { + *path = parent; goto out; } @@ -1282,6 +1273,23 @@ out: return err; } +struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, + const char *name, + unsigned int flags, + struct path *path) +{ + char *abs_name; + struct dentry *dent; + + abs_name = convert_to_unix_name(work->tcon->share_conf, name); + if (!abs_name) + return ERR_PTR(-ENOMEM); + + dent = kern_path_create(AT_FDCWD, abs_name, path, flags); + kfree(abs_name); + return dent; +} + int ksmbd_vfs_remove_acl_xattrs(struct user_namespace *user_ns, struct dentry *dentry) { diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h index 85db50abdb24..7b1dcaa3fbdc 100644 --- a/fs/ksmbd/vfs.h +++ b/fs/ksmbd/vfs.h @@ -126,7 +126,7 @@ int ksmbd_vfs_link(struct ksmbd_work *work, int ksmbd_vfs_getattr(struct path *path, struct kstat *stat); int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, char *newname); -int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, +int ksmbd_vfs_truncate(struct ksmbd_work *work, struct ksmbd_file *fp, loff_t size); struct srv_copychunk; int ksmbd_vfs_copy_file_ranges(struct ksmbd_work *work, @@ -152,8 +152,13 @@ int ksmbd_vfs_xattr_stream_name(char *stream_name, char **xattr_stream_name, size_t *xattr_stream_name_size, int s_type); int ksmbd_vfs_remove_xattr(struct user_namespace *user_ns, struct dentry *dentry, char *attr_name); -int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, +int ksmbd_vfs_kern_path(struct ksmbd_work *work, + char *name, unsigned int flags, struct path *path, bool caseless); +struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, + const char *name, + unsigned int flags, + struct path *path); int ksmbd_vfs_empty_dir(struct ksmbd_file *fp); void ksmbd_vfs_set_fadvise(struct file *filp, __le32 option); int ksmbd_vfs_zero_data(struct ksmbd_work *work, struct ksmbd_file *fp, -- cgit v1.2.3 From 9da1b86865ab4376408c58cd9fec332c8bdb5c73 Mon Sep 17 00:00:00 2001 From: Nuno Sá Date: Mon, 20 Sep 2021 11:00:47 +0200 Subject: iio: adis16475: fix deadlock on frequency set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With commit 39c024b51b560 ("iio: adis16475: improve sync scale mode handling"), two deadlocks were introduced: 1) The call to 'adis_write_reg_16()' was not changed to it's unlocked version. 2) The lock was not being released on the success path of the function. This change fixes both these issues. Fixes: 39c024b51b560 ("iio: adis16475: improve sync scale mode handling") Signed-off-by: Nuno Sá Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210920090047.74903-1-nuno.sa@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16475.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index eb48102f9424..287fff39a927 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -353,10 +353,11 @@ static int adis16475_set_freq(struct adis16475 *st, const u32 freq) if (dec > st->info->max_dec) dec = st->info->max_dec; - ret = adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec); + ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec); if (ret) goto error; + adis_dev_unlock(&st->adis); /* * If decimation is used, then gyro and accel data will have meaningful * bits on the LSB registers. This info is used on the trigger handler. -- cgit v1.2.3 From b193e15ac69d56f35e1d8e2b5d16cbd47764d053 Mon Sep 17 00:00:00 2001 From: 王贇 Date: Fri, 24 Sep 2021 10:35:58 +0800 Subject: net: prevent user from passing illegal stab size We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by: Abaci Signed-off-by: Michael Wang Signed-off-by: David S. Miller --- include/net/pkt_sched.h | 1 + net/sched/sch_api.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 6d7b12cba015..bf79f3a890af 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -11,6 +11,7 @@ #include #define DEFAULT_TX_QUEUE_LEN 1000 +#define STAB_SIZE_LOG_MAX 30 struct qdisc_walker { int stop; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 5e90e9b160e3..12f39a2dffd4 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -513,6 +513,12 @@ static struct qdisc_size_table *qdisc_get_stab(struct nlattr *opt, return stab; } + if (s->size_log > STAB_SIZE_LOG_MAX || + s->cell_log > STAB_SIZE_LOG_MAX) { + NL_SET_ERR_MSG(extack, "Invalid logarithmic size of size table"); + return ERR_PTR(-EINVAL); + } + stab = kmalloc(sizeof(*stab) + tsize * sizeof(u16), GFP_KERNEL); if (!stab) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From c2980c64c7fd4585d684574c92d1624d44961edd Mon Sep 17 00:00:00 2001 From: Hui Liu Date: Sun, 26 Sep 2021 15:30:28 +0800 Subject: iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED The previous driver does't apply the necessary scaling to take the voltage range into account. We change readback value from raw data to input voltage to fix case IIO_CHAN_INFO_PROCESSED. Fixes: ace4cdfe67be ("iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.") Signed-off-by: Hui Liu Link: https://lore.kernel.org/r/20210926073028.11045-2-hui.liu@mediatek.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mt6577_auxadc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c index 79c1dd68b909..d4fccd52ef08 100644 --- a/drivers/iio/adc/mt6577_auxadc.c +++ b/drivers/iio/adc/mt6577_auxadc.c @@ -82,6 +82,10 @@ static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = { MT6577_AUXADC_CHANNEL(15), }; +/* For Voltage calculation */ +#define VOLTAGE_FULL_RANGE 1500 /* VA voltage */ +#define AUXADC_PRECISE 4096 /* 12 bits */ + static int mt_auxadc_get_cali_data(int rawdata, bool enable_cali) { return rawdata; @@ -191,6 +195,10 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev, } if (adc_dev->dev_comp->sample_data_cali) *val = mt_auxadc_get_cali_data(*val, true); + + /* Convert adc raw data to voltage: 0 - 1500 mV */ + *val = *val * VOLTAGE_FULL_RANGE / AUXADC_PRECISE; + return IIO_VAL_INT; default: -- cgit v1.2.3 From 319aeaf69c85dc39768b3754c1786225e38e2871 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 24 Sep 2021 16:42:21 -0500 Subject: arm: dts: vexpress: Fix motherboard bus 'interrupt-map' Commit 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress boards. The problem is #address-cells size changed, but interrupt-map was not updated. This results in the timer interrupt (and all the other motherboard interrupts) not getting mapped. As the 'interrupt-map' properties are all just duplicates across boards, just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi. Strictly speaking, 'interrupt-map' is dependent on the parent interrupt controller, but it's not likely we'll ever have a different parent than GICv2 on these old platforms. If there was one, 'interrupt-map' can still be overridden. Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org Fixes: 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") Cc: Guillaume Tucker Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: linux-arm-kernel@lists.infradead.org Reported-by: Reported-by: "kernelci.org bot" Signed-off-by: Rob Herring Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 47 +++++++++++++++++++++ arch/arm/boot/dts/vexpress-v2m.dtsi | 47 +++++++++++++++++++++ arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 46 --------------------- arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 46 --------------------- arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 46 --------------------- arch/arm/boot/dts/vexpress-v2p-ca9.dts | 48 ---------------------- .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 45 -------------------- 7 files changed, 94 insertions(+), 231 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 75927a052f8f..8af4b77fe655 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -17,6 +17,7 @@ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT * CHANGES TO vexpress-v2m.dtsi! */ +#include / { v2m_fixed_3v3: fixed-regulator-0 { @@ -105,6 +106,52 @@ #address-cells = <1>; #size-cells = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 63>; + interrupt-map = <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + motherboard-bus@8000000 { arm,hbi = <0x190>; arm,vexpress,site = <0>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 0547f633764f..f434fe5cf4a1 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -17,6 +17,7 @@ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT * CHANGES TO vexpress-v2m-rs1.dtsi! */ +#include / { bus@40000000 { @@ -26,6 +27,52 @@ ranges = <0x40000000 0x40000000 0x10000000>, <0x10000000 0x10000000 0x00020000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 63>; + interrupt-map = <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + motherboard-bus@40000000 { arm,hbi = <0x190>; arm,vexpress,site = <0>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 7fb387a7f81b..679537e17ff5 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -238,52 +238,6 @@ bus@8000000 { ranges = <0x8000000 0 0x8000000 0x18000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index f81d14753273..511e87cc2bc5 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -610,52 +610,6 @@ smb: bus@8000000 { ranges = <0x8000000 0 0x8000000 0x18000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 42dbf606b1e2..3b88209bacea 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -208,52 +208,6 @@ smb: bus@8000000 { ranges = <0 0x8000000 0x18000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 99b2f339cc04..5916e4877eac 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -295,54 +295,6 @@ }; }; - smb: bus@40000000 { - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - }; - site2: hsb@e0000000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 5f6a5951adef..5b6d9d8e934d 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -146,50 +146,5 @@ smb: bus@8000000 { ranges = <0x8000000 0 0x8000000 0x18000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; }; -- cgit v1.2.3 From ea1945c2f72d7bd253e2ebaa97cdd8d9ffcde076 Mon Sep 17 00:00:00 2001 From: Nuno Sá Date: Fri, 3 Sep 2021 16:14:23 +0200 Subject: iio: adis16480: fix devices that do not support sleep mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Not all devices supported by this driver support being put to sleep mode. For those devices, when calling 'adis16480_stop_device()' on the unbind path, we where actually writing in the SYNC_SCALE register. Fixes: 80cbc848c4fa0 ("iio: imu: adis16480: Add support for ADIS16490") Fixes: 82e7a1b250170 ("iio: imu: adis16480: Add support for ADIS1649x family of devices") Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20210903141423.517028-6-nuno.sa@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16480.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c index a869a6e52a16..ed129321a14d 100644 --- a/drivers/iio/imu/adis16480.c +++ b/drivers/iio/imu/adis16480.c @@ -144,6 +144,7 @@ struct adis16480_chip_info { unsigned int max_dec_rate; const unsigned int *filter_freqs; bool has_pps_clk_mode; + bool has_sleep_cnt; const struct adis_data adis_data; }; @@ -939,6 +940,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0), }, @@ -952,6 +954,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0), }, @@ -965,6 +968,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0), }, @@ -978,6 +982,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .temp_scale = 5650, /* 5.65 milli degree Celsius */ .int_clk = 2460000, .max_dec_rate = 2048, + .has_sleep_cnt = true, .filter_freqs = adis16480_def_filter_freqs, .adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0), }, @@ -1425,9 +1430,12 @@ static int adis16480_probe(struct spi_device *spi) if (ret) return ret; - ret = devm_add_action_or_reset(&spi->dev, adis16480_stop, indio_dev); - if (ret) - return ret; + if (st->chip_info->has_sleep_cnt) { + ret = devm_add_action_or_reset(&spi->dev, adis16480_stop, + indio_dev); + if (ret) + return ret; + } ret = adis16480_config_irq_pin(spi->dev.of_node, st); if (ret) -- cgit v1.2.3 From 5816b3e6577eaa676ceb00a848f0fd65fe2adc29 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 Sep 2021 14:08:19 -0700 Subject: Linux 5.15-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5e7c1d854441..437ccc66a1c2 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit v1.2.3 From 18d46769d54aba03c2c3fa666fe810f264b5d7b8 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Tue, 21 Sep 2021 14:45:27 +0900 Subject: ksmbd: remove RFC1002 check in smb2 request MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In smb_common.c you have this function : ksmbd_smb_request() which is called from connection.c once you have read the initial 4 bytes for the next length+smb2 blob. It checks the first byte of this 4 byte preamble for valid values, i.e. a NETBIOSoverTCP SESSION_MESSAGE or a SESSION_KEEP_ALIVE. We don't need to check this for ksmbd since it only implements SMB2 over TCP port 445. The netbios stuff was only used in very old servers when SMB ran over TCP port 139. Now that we run over TCP port 445, this is actually not a NB header anymore and you can just treat it as a 4 byte length field that must be less than 16Mbyte. and remove the references to the RFC1002 constants that no longer applies. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Cc: Sergey Senozhatsky Acked-by: Hyunchul Lee Signed-off-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb_common.c | 15 +-------------- fs/ksmbd/smb_common.h | 8 -------- 2 files changed, 1 insertion(+), 22 deletions(-) diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 40f4fafa2e11..5901b2884c60 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -155,20 +155,7 @@ int ksmbd_verify_smb_message(struct ksmbd_work *work) */ bool ksmbd_smb_request(struct ksmbd_conn *conn) { - int type = *(char *)conn->request_buf; - - switch (type) { - case RFC1002_SESSION_MESSAGE: - /* Regular SMB request */ - return true; - case RFC1002_SESSION_KEEP_ALIVE: - ksmbd_debug(SMB, "RFC 1002 session keep alive\n"); - break; - default: - ksmbd_debug(SMB, "RFC 1002 unknown request type 0x%x\n", type); - } - - return false; + return conn->request_buf[0] == 0; } static bool supported_protocol(int idx) diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h index 0a6af447cc45..994abede27e9 100644 --- a/fs/ksmbd/smb_common.h +++ b/fs/ksmbd/smb_common.h @@ -48,14 +48,6 @@ #define CIFS_DEFAULT_IOSIZE (64 * 1024) #define MAX_CIFS_SMALL_BUFFER_SIZE 448 /* big enough for most */ -/* RFC 1002 session packet types */ -#define RFC1002_SESSION_MESSAGE 0x00 -#define RFC1002_SESSION_REQUEST 0x81 -#define RFC1002_POSITIVE_SESSION_RESPONSE 0x82 -#define RFC1002_NEGATIVE_SESSION_RESPONSE 0x83 -#define RFC1002_RETARGET_SESSION_RESPONSE 0x84 -#define RFC1002_SESSION_KEEP_ALIVE 0x85 - /* Responses when opening a file. */ #define F_SUPERSEDED 0 #define F_OPENED 1 -- cgit v1.2.3 From d72a9c158893d537d769a669a5837bc80b0f851c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 24 Sep 2021 09:24:08 +0900 Subject: ksmbd: fix invalid request buffer access in compound MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ronnie reported invalid request buffer access in chained command when inserting garbage value to NextCommand of compound request. This patch add validation check to avoid this issue. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Tested-by: Steve French Reviewed-by: Steve French Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 761e12171dc4..cea376b2dd8f 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -459,13 +459,22 @@ static void init_chained_smb2_rsp(struct ksmbd_work *work) bool is_chained_smb2_message(struct ksmbd_work *work) { struct smb2_hdr *hdr = work->request_buf; - unsigned int len; + unsigned int len, next_cmd; if (hdr->ProtocolId != SMB2_PROTO_NUMBER) return false; hdr = ksmbd_req_buf_next(work); - if (le32_to_cpu(hdr->NextCommand) > 0) { + next_cmd = le32_to_cpu(hdr->NextCommand); + if (next_cmd > 0) { + if ((u64)work->next_smb2_rcv_hdr_off + next_cmd + + __SMB2_HEADER_STRUCTURE_SIZE > + get_rfc1002_len(work->request_buf)) { + pr_err("next command(%u) offset exceeds smb msg size\n", + next_cmd); + return false; + } + ksmbd_debug(SMB, "got SMB2 chained command\n"); init_chained_smb2_rsp(work); return true; -- cgit v1.2.3 From 88a04049c08cd62e698bc1b1af2d09574b9e0aee Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Thu, 23 Sep 2021 17:59:27 +0530 Subject: HID: amd_sfh: Fix potential NULL pointer dereference The cl_data field of a privdata must be allocated and updated before using in amd_sfh_hid_client_init() function. Hence handling NULL pointer cl_data accordingly. Fixes: d46ef750ed58 ("HID: amd_sfh: Fix potential NULL pointer dereference") Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 9a1824757aae..05c007b213f2 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -251,21 +251,17 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i return rc; } - rc = amd_sfh_hid_client_init(privdata); - if (rc) - return rc; - privdata->cl_data = devm_kzalloc(&pdev->dev, sizeof(struct amdtp_cl_data), GFP_KERNEL); if (!privdata->cl_data) return -ENOMEM; - rc = devm_add_action_or_reset(&pdev->dev, amd_mp2_pci_remove, privdata); + mp2_select_ops(privdata); + + rc = amd_sfh_hid_client_init(privdata); if (rc) return rc; - mp2_select_ops(privdata); - - return 0; + return devm_add_action_or_reset(&pdev->dev, amd_mp2_pci_remove, privdata); } static int __maybe_unused amd_mp2_pci_resume(struct device *dev) -- cgit v1.2.3 From da0468a744501065d9ce3891f8ba35be2969ae4d Mon Sep 17 00:00:00 2001 From: Akira Yokosawa Date: Mon, 20 Sep 2021 16:05:00 +0900 Subject: drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid Nested grids in grid-table cells are not specified as proper ReST constructs. Commit 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") added a couple of kerneldoc tables of the form: +---+-------+------------------------------------------------------+ | 1 | 31:0 | +------------------------------------------------+ | +---+-------+ | | | |...| | | Embedded `HXG Message`_ | | +---+-------+ | | | | n | 31:0 | +------------------------------------------------+ | +---+-------+------------------------------------------------------+ For "make htmldocs", they happen to work as one might expect, but they are incompatible with "make latexdocs" and "make pdfdocs", and cause the generated gpu.tex file to become incomplete and unbuildable by xelatex. Restore the compatibility by removing those nested grids in the tables. Size comparison of generated gpu.tex: Sphinx 2.4.4 Sphinx 4.2.0 v5.14: 3238686 3841631 v5.15-rc1: 376270 432729 with this fix: 3377846 3998095 Fixes: 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") Cc: John Harrison Cc: Michal Wajdeczko Cc: Matthew Brost Cc: Daniele Ceraolo Spurio Cc: Matt Roper Cc: Jonathan Corbet Signed-off-by: Akira Yokosawa Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com (cherry picked from commit 017792a041183c4f5ec595f386e76a40ed728cfc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h | 10 +++++----- drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h index 99e1fad5ca20..c9086a600bce 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h @@ -102,11 +102,11 @@ static_assert(sizeof(struct guc_ct_buffer_desc) == 64); * | +-------+--------------------------------------------------------------+ * | | 7:0 | NUM_DWORDS = length (in dwords) of the embedded HXG message | * +---+-------+--------------------------------------------------------------+ - * | 1 | 31:0 | +--------------------------------------------------------+ | - * +---+-------+ | | | - * |...| | | Embedded `HXG Message`_ | | - * +---+-------+ | | | - * | n | 31:0 | +--------------------------------------------------------+ | + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | [Embedded `HXG Message`_] | + * +---+-------+ | + * | n | 31:0 | | * +---+-------+--------------------------------------------------------------+ */ diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h index bbf1ddb77434..9baa3cb07d13 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h @@ -38,11 +38,11 @@ * +---+-------+--------------------------------------------------------------+ * | | Bits | Description | * +===+=======+==============================================================+ - * | 0 | 31:0 | +--------------------------------------------------------+ | - * +---+-------+ | | | - * |...| | | Embedded `HXG Message`_ | | - * +---+-------+ | | | - * | n | 31:0 | +--------------------------------------------------------+ | + * | 0 | 31:0 | | + * +---+-------+ | + * |...| | [Embedded `HXG Message`_] | + * +---+-------+ | + * | n | 31:0 | | * +---+-------+--------------------------------------------------------------+ */ -- cgit v1.2.3 From c83ff0186401169eb27ce5057d820b7a863455c3 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 21 Sep 2021 14:42:02 +0100 Subject: drm/i915/request: fix early tracepoints Currently we blow up in trace_dma_fence_init, when calling into get_driver_name or get_timeline_name, since both the engine and context might be NULL(or contain some garbage address) in the case of newly allocated slab objects via the request ctor. Note that we also use SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately freed, but delay freeing the underlying page by an RCU grace period. With this scheme requests can be re-allocated, at the same time as they are also being read by some lockless RCU lookup mechanism. In the ctor case, which is only called for new slab objects(i.e allocate new page and call the ctor for each object) it's safe to reset the context/engine prior to calling into dma_fence_init, since we can be certain that no one is doing an RCU lookup which might depend on peeking at the engine/context, like in active_engine(), since the object can't yet be externally visible. In the recycled case(which might also be externally visible) the request refcount always transitions from 0->1 after we set the context/engine etc, which should ensure it's valid to dereference the engine for example, when doing an RCU list-walk, so long as we can also increment the refcount first. If the refcount is already zero, then the request is considered complete/released. If it's non-zero, then the request might be in the process of being re-allocated, or potentially still in flight, however after successfully incrementing the refcount, it's possible to carefully inspect the request state, to determine if the request is still what we were looking for. Note that all externally visible requests returned to the cache must have zero refcount. One possible fix then is to move dma_fence_init out from the request ctor. Originally this was how it was done, but it was moved in: commit 855e39e65cfc33a73724f1cc644ffc5754864a20 Author: Chris Wilson Date: Mon Feb 3 09:41:48 2020 +0000 drm/i915: Initialise basic fence before acquiring seqno where it looks like intel_timeline_get_seqno() relied on some of the rq->fence state, but that is no longer the case since: commit 12ca695d2c1ed26b2dcbb528b42813bd0f216cfc Author: Maarten Lankhorst Date: Tue Mar 23 16:49:50 2021 +0100 drm/i915: Do not share hwsp across contexts any more, v8. intel_timeline_get_seqno() could also be cleaned up slightly by dropping the request argument. Moving dma_fence_init back out of the ctor, should ensure we have enough of the request initialised in case of trace_dma_fence_init. Functionally this should be the same, and is effectively what we were already open coding before, except now we also assign the fence->lock and fence->ops, but since these are invariant for recycled requests(which might be externally visible), and will therefore already hold the same value, it shouldn't matter. An alternative fix, since we don't yet have a fully initialised request when in the ctor, is just setting the context/engine as NULL, but this does require adding some extra handling in get_driver_name etc. v2(Daniel): - Try to make the commit message less confusing Fixes: 855e39e65cfc ("drm/i915: Initialise basic fence before acquiring seqno") Signed-off-by: Matthew Auld Cc: Michael Mason Cc: Daniel Vetter Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com (cherry picked from commit be988eaee1cb208c4445db46bc3ceaf75f586f0b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_request.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c index ce446716d092..79da5eca60af 100644 --- a/drivers/gpu/drm/i915/i915_request.c +++ b/drivers/gpu/drm/i915/i915_request.c @@ -829,8 +829,6 @@ static void __i915_request_ctor(void *arg) i915_sw_fence_init(&rq->submit, submit_notify); i915_sw_fence_init(&rq->semaphore, semaphore_notify); - dma_fence_init(&rq->fence, &i915_fence_ops, &rq->lock, 0, 0); - rq->capture_list = NULL; init_llist_head(&rq->execute_cb); @@ -905,17 +903,12 @@ __i915_request_create(struct intel_context *ce, gfp_t gfp) rq->ring = ce->ring; rq->execution_mask = ce->engine->mask; - kref_init(&rq->fence.refcount); - rq->fence.flags = 0; - rq->fence.error = 0; - INIT_LIST_HEAD(&rq->fence.cb_list); - ret = intel_timeline_get_seqno(tl, rq, &seqno); if (ret) goto err_free; - rq->fence.context = tl->fence_context; - rq->fence.seqno = seqno; + dma_fence_init(&rq->fence, &i915_fence_ops, &rq->lock, + tl->fence_context, seqno); RCU_INIT_POINTER(rq->timeline, tl); rq->hwsp_seqno = tl->hwsp_seqno; -- cgit v1.2.3 From 4b8bcaf8a6d6ab5db51e30865def5cb694eb2966 Mon Sep 17 00:00:00 2001 From: Tejas Upadhyay Date: Tue, 14 Sep 2021 14:34:12 +0530 Subject: drm/i915: Remove warning from the rps worker In commit 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()"), we decoupled the rps worker from the pm so that we could avoid the synchronization penalty which makes the assertion liable to run too early. Which makes warning invalid hence removed. Fixes: 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()") Reviewed-by: Chris Wilson Signed-off-by: Tejas Upadhyay Signed-off-by: Matt Roper Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com (cherry picked from commit a837a0686308d95ad9c48d32b4dfe86a17dc98c2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_rps.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c index 591a5224287e..0a03fbed9f9b 100644 --- a/drivers/gpu/drm/i915/gt/intel_rps.c +++ b/drivers/gpu/drm/i915/gt/intel_rps.c @@ -882,8 +882,6 @@ void intel_rps_park(struct intel_rps *rps) if (!intel_rps_is_enabled(rps)) return; - GEM_BUG_ON(atomic_read(&rps->num_waiters)); - if (!intel_rps_clear_active(rps)) return; -- cgit v1.2.3 From 94513069eb549737bcfc3d988d6ed4da948a2de8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Sep 2021 11:58:39 +0200 Subject: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. Cc: stable@vger.kernel.org Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame") Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid Signed-off-by: Johannes Berg --- net/mac80211/wpa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bca47fad5a16..4eed23e27610 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -520,6 +520,9 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx, return RX_DROP_UNUSABLE; } + /* reload hdr - skb might have been reallocated */ + hdr = (void *)rx->skb->data; + data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len; if (!rx->sta || data_len < 0) return RX_DROP_UNUSABLE; @@ -749,6 +752,9 @@ ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx) return RX_DROP_UNUSABLE; } + /* reload hdr - skb might have been reallocated */ + hdr = (void *)rx->skb->data; + data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN - mic_len; if (!rx->sta || data_len < 0) return RX_DROP_UNUSABLE; -- cgit v1.2.3 From 111461d573741c17eafad029ac93474fa9adcce0 Mon Sep 17 00:00:00 2001 From: MichelleJin Date: Mon, 27 Sep 2021 03:34:57 +0000 Subject: mac80211: check return value of rhashtable_init When rhashtable_init() fails, it returns -EINVAL. However, since error return value of rhashtable_init is not checked, it can cause use of uninitialized pointers. So, fix unhandled errors of rhashtable_init. Signed-off-by: MichelleJin Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/mesh_pathtbl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index efbefcbac3ac..7cab1cf09bf1 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -60,7 +60,10 @@ static struct mesh_table *mesh_table_alloc(void) atomic_set(&newtbl->entries, 0); spin_lock_init(&newtbl->gates_lock); spin_lock_init(&newtbl->walk_lock); - rhashtable_init(&newtbl->rhead, &mesh_rht_params); + if (rhashtable_init(&newtbl->rhead, &mesh_rht_params)) { + kfree(newtbl); + return NULL; + } return newtbl; } -- cgit v1.2.3 From 33092aca857bf35a8e9cac0e8340c685a4796e90 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Fri, 24 Sep 2021 22:05:14 +0200 Subject: mac80211: Fix Ptk0 rekey documentation @IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX. Move the requirement to the correct section in the PTK0 rekey documentation. Signed-off-by: Alexander Wetzel Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg --- include/net/mac80211.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index af0fc13cea34..618d1f427cb2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2818,13 +2818,13 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * Mac80211 drivers should set the @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 flag * when they are able to replace in-use PTK keys according to the following * requirements: - * 1) They do not hand over frames decrypted with the old key to - mac80211 once the call to set_key() with command %DISABLE_KEY has been - completed when also setting @IEEE80211_KEY_FLAG_GENERATE_IV for any key, + * 1) They do not hand over frames decrypted with the old key to mac80211 + once the call to set_key() with command %DISABLE_KEY has been completed, 2) either drop or continue to use the old key for any outgoing frames queued at the time of the key deletion (including re-transmits), 3) never send out a frame queued prior to the set_key() %SET_KEY command - encrypted with the new key and + encrypted with the new key when also needing + @IEEE80211_KEY_FLAG_GENERATE_IV and 4) never send out a frame unencrypted when it should be encrypted. Mac80211 will not queue any new frames for a deleted key to the driver. */ -- cgit v1.2.3 From 44b6aa2ef69f5b0edf595810236f4ff61503b7e9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 24 Sep 2021 23:31:46 +0100 Subject: net: hns: Fix spelling mistake "maped" -> "mapped" There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c index 3e54017a2a5b..07fdab58001d 100644 --- a/drivers/net/ethernet/hisilicon/hns_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -354,7 +354,7 @@ static int hns_mdio_reset(struct mii_bus *bus) if (dev_of_node(bus->parent)) { if (!mdio_dev->subctrl_vbase) { - dev_err(&bus->dev, "mdio sys ctl reg has not maped\n"); + dev_err(&bus->dev, "mdio sys ctl reg has not mapped\n"); return -ENODEV; } -- cgit v1.2.3 From 763716a55cb1f480ffe1a9702e6b5d9ea1a80a24 Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Sat, 25 Sep 2021 11:36:27 +0000 Subject: net: bgmac-platform: handle mac-address deferral This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac-platform.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c index 4ab5bf64d353..df8ff839cc62 100644 --- a/drivers/net/ethernet/broadcom/bgmac-platform.c +++ b/drivers/net/ethernet/broadcom/bgmac-platform.c @@ -192,6 +192,9 @@ static int bgmac_probe(struct platform_device *pdev) bgmac->dma_dev = &pdev->dev; ret = of_get_mac_address(np, bgmac->net_dev->dev_addr); + if (ret == -EPROBE_DEFER) + return ret; + if (ret) dev_warn(&pdev->dev, "MAC address not present in device tree\n"); -- cgit v1.2.3 From 172da89ed0eaf9d9348f5decb86ad04c624b39d1 Mon Sep 17 00:00:00 2001 From: Vineeth Vijayan Date: Fri, 10 Sep 2021 13:45:24 +0200 Subject: s390/cio: avoid excessive path-verification requests Currently when removing a device from cio_ignore list, we trigger a path-verification for all the subchannels available in the system. This could lead to path-verification requests on subchannels with an online device, which could cause unwanted delay. Instead of all the subchannels, trigger the path-verifications to those without an online device. Reported-by: Julian Wiedmann Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by: Vineeth Vijayan Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens --- drivers/s390/cio/blacklist.c | 8 +++++--- drivers/s390/cio/css.c | 40 +++++++++++++++++++++++++++++++--------- drivers/s390/cio/css.h | 10 +++++++++- 3 files changed, 45 insertions(+), 13 deletions(-) diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index f3c656975e05..93695d535380 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -262,10 +262,12 @@ static int blacklist_parse_proc_parameters(char *buf) if (strcmp("free", parm) == 0) { rc = blacklist_parse_parameters(buf, free, 0); - /* There could be subchannels without proper devices connected. - * evaluate all the entries + /* + * Evaluate the subchannels without an online device. This way, + * no path-verification will be triggered on those subchannels + * and it avoids unnecessary delays. */ - css_schedule_eval_all(); + css_schedule_eval_cond(CSS_EVAL_NOT_ONLINE, 0); } else if (strcmp("add", parm) == 0) rc = blacklist_parse_parameters(buf, add, 0); else if (strcmp("purge", parm) == 0) diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 3377097e65de..44461928aab8 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -788,27 +788,49 @@ static int __unset_registered(struct device *dev, void *data) return 0; } -void css_schedule_eval_all_unreg(unsigned long delay) +static int __unset_online(struct device *dev, void *data) +{ + struct idset *set = data; + struct subchannel *sch = to_subchannel(dev); + struct ccw_device *cdev = sch_get_cdev(sch); + + if (cdev && cdev->online) + idset_sch_del(set, sch->schid); + + return 0; +} + +void css_schedule_eval_cond(enum css_eval_cond cond, unsigned long delay) { unsigned long flags; - struct idset *unreg_set; + struct idset *set; /* Find unregistered subchannels. */ - unreg_set = idset_sch_new(); - if (!unreg_set) { + set = idset_sch_new(); + if (!set) { /* Fallback. */ css_schedule_eval_all(); return; } - idset_fill(unreg_set); - bus_for_each_dev(&css_bus_type, NULL, unreg_set, __unset_registered); + idset_fill(set); + switch (cond) { + case CSS_EVAL_UNREG: + bus_for_each_dev(&css_bus_type, NULL, set, __unset_registered); + break; + case CSS_EVAL_NOT_ONLINE: + bus_for_each_dev(&css_bus_type, NULL, set, __unset_online); + break; + default: + break; + } + /* Apply to slow_subchannel_set. */ spin_lock_irqsave(&slow_subchannel_lock, flags); - idset_add_set(slow_subchannel_set, unreg_set); + idset_add_set(slow_subchannel_set, set); atomic_set(&css_eval_scheduled, 1); queue_delayed_work(cio_work_q, &slow_path_work, delay); spin_unlock_irqrestore(&slow_subchannel_lock, flags); - idset_free(unreg_set); + idset_free(set); } void css_wait_for_slow_path(void) @@ -820,7 +842,7 @@ void css_wait_for_slow_path(void) void css_schedule_reprobe(void) { /* Schedule with a delay to allow merging of subsequent calls. */ - css_schedule_eval_all_unreg(1 * HZ); + css_schedule_eval_cond(CSS_EVAL_UNREG, 1 * HZ); } EXPORT_SYMBOL_GPL(css_schedule_reprobe); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index c98522cbe276..ede0b905bc6f 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -34,6 +34,14 @@ #define SNID_STATE3_MULTI_PATH 1 #define SNID_STATE3_SINGLE_PATH 0 +/* + * Conditions used to specify which subchannels need evaluation + */ +enum css_eval_cond { + CSS_EVAL_UNREG, /* unregistered subchannels */ + CSS_EVAL_NOT_ONLINE /* sch without an online-device */ +}; + struct path_state { __u8 state1 : 2; /* path state value 1 */ __u8 state2 : 2; /* path state value 2 */ @@ -136,7 +144,7 @@ static inline struct channel_subsystem *css_by_id(u8 cssid) /* Helper functions to build lists for the slow path. */ void css_schedule_eval(struct subchannel_id schid); void css_schedule_eval_all(void); -void css_schedule_eval_all_unreg(unsigned long delay); +void css_schedule_eval_cond(enum css_eval_cond, unsigned long delay); int css_complete_work(void); int sch_is_pseudo_sch(struct subchannel *); -- cgit v1.2.3 From ceef3240f9b7e592dd8d10d619c312c7336117fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 24 Sep 2021 20:49:56 +0100 Subject: ASoC: pcm179x: Add missing entries SPI to device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding SPI IDs for parts that only have a compatible listed. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20210924194956.46079-1-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/pcm179x-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/pcm179x-spi.c b/sound/soc/codecs/pcm179x-spi.c index 0a542924ec5f..ebf63ea90a1c 100644 --- a/sound/soc/codecs/pcm179x-spi.c +++ b/sound/soc/codecs/pcm179x-spi.c @@ -36,6 +36,7 @@ static const struct of_device_id pcm179x_of_match[] = { MODULE_DEVICE_TABLE(of, pcm179x_of_match); static const struct spi_device_id pcm179x_spi_ids[] = { + { "pcm1792a", 0 }, { "pcm179x", 0 }, { }, }; -- cgit v1.2.3 From 0cc3687eadd0971d5d38ff90d14819d88f854960 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 24 Sep 2021 20:48:44 +0100 Subject: ASoC: cs4341: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding SPI IDs for parts that only have a compatible listed. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax Link: https://lore.kernel.org/r/20210924194844.45974-1-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/cs4341.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/cs4341.c b/sound/soc/codecs/cs4341.c index 7d3e54d8eef3..29d05e32d341 100644 --- a/sound/soc/codecs/cs4341.c +++ b/sound/soc/codecs/cs4341.c @@ -305,12 +305,19 @@ static int cs4341_spi_probe(struct spi_device *spi) return cs4341_probe(&spi->dev); } +static const struct spi_device_id cs4341_spi_ids[] = { + { "cs4341a" }, + { } +}; +MODULE_DEVICE_TABLE(spi, cs4341_spi_ids); + static struct spi_driver cs4341_spi_driver = { .driver = { .name = "cs4341-spi", .of_match_table = of_match_ptr(cs4341_dt_ids), }, .probe = cs4341_spi_probe, + .id_table = cs4341_spi_ids, }; #endif -- cgit v1.2.3 From 6840615f85f6046039ebc4989870ddb12892b7fc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Sep 2021 18:00:23 +0100 Subject: spi: spidev: Add SPI ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20210923170023.1683-1-broonie@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 6dc29ce3b4bf..1bd73e322b7b 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = { static struct class *spidev_class; +static const struct spi_device_id spidev_spi_ids[] = { + { .name = "dh2228fv" }, + { .name = "ltc2488" }, + { .name = "sx1301" }, + { .name = "bk4" }, + { .name = "dhcom-board" }, + { .name = "m53cpld" }, + { .name = "spi-petra" }, + { .name = "spi-authenta" }, + {}, +}; +MODULE_DEVICE_TABLE(spi, spidev_spi_ids); + #ifdef CONFIG_OF static const struct of_device_id spidev_dt_ids[] = { { .compatible = "rohm,dh2228fv" }, @@ -818,6 +831,7 @@ static struct spi_driver spidev_spi_driver = { }, .probe = spidev_probe, .remove = spidev_remove, + .id_table = spidev_spi_ids, /* NOTE: suspend/resume methods are not necessary here. * We don't do anything except pass the requests to/from -- cgit v1.2.3 From 2974b8a691a94ad5bf29b584dd4fb03829aa43d1 Mon Sep 17 00:00:00 2001 From: "Desnes A. Nunes do Rosario" Date: Sat, 25 Sep 2021 12:14:18 -0300 Subject: Revert "ibmvnic: check failover_pending in login response" This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f. Code has been duplicated through commit <273c29e944bd> "ibmvnic: check failover_pending in login response" Signed-off-by: Desnes A. Nunes do Rosario Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index a4579b340120..6aa6ff89a765 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4708,14 +4708,6 @@ static int handle_login_rsp(union ibmvnic_crq *login_rsp_crq, return 0; } - if (adapter->failover_pending) { - adapter->init_done_rc = -EAGAIN; - netdev_dbg(netdev, "Failover pending, ignoring login response\n"); - complete(&adapter->init_done); - /* login response buffer will be released on reset */ - return 0; - } - netdev->mtu = adapter->req_mtu - ETH_HLEN; netdev_dbg(adapter->netdev, "Login Response Buffer:\n"); -- cgit v1.2.3 From ab609f25d19858513919369ff3d9a63c02cd9e2e Mon Sep 17 00:00:00 2001 From: Yanfei Xu Date: Sun, 26 Sep 2021 12:53:13 +0800 Subject: net: mdiobus: Fix memory leak in __mdiobus_register Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [] kmalloc include/linux/slab.h:591 [inline] [] kzalloc include/linux/slab.h:721 [inline] [] device_private_init drivers/base/core.c:3203 [inline] [] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 [] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kstrdup+0x36/0x70 mm/util.c:60 [] kstrdup_const+0x53/0x80 mm/util.c:83 [] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 53f034fc2ef7..6f4b4e5df639 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -537,6 +537,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) err = device_register(&bus->dev); if (err) { pr_err("mii_bus %s failed to register\n", bus->id); + put_device(&bus->dev); return -EINVAL; } -- cgit v1.2.3 From fe23036192c95b66e60d019d2ec1814d0d561ffd Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:24 +0200 Subject: dsa: mv88e6xxx: 6161: Use chip wide MAX MTU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The datasheets suggests the 6161 uses a per port setting for jumbo frames. Testing has however shown this is not correct, it uses the old style chip wide MTU control. Change the ops in the 6161 structure to reflect this. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8ab0be793811..86d3cab6ceef 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3725,7 +3725,6 @@ static const struct mv88e6xxx_ops mv88e6161_ops = { .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, .port_set_ether_type = mv88e6351_port_set_ether_type, - .port_set_jumbo_size = mv88e6165_port_set_jumbo_size, .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting, .port_pause_limit = mv88e6097_port_pause_limit, .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, @@ -3750,6 +3749,7 @@ static const struct mv88e6xxx_ops mv88e6161_ops = { .avb_ops = &mv88e6165_avb_ops, .ptp_ops = &mv88e6165_ptp_ops, .phylink_validate = mv88e6185_phylink_validate, + .set_max_frame_size = mv88e6185_g1_set_max_frame_size, }; static const struct mv88e6xxx_ops mv88e6165_ops = { -- cgit v1.2.3 From b92ce2f54c0f0ff781e914ec189c25f7bf1b1ec2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:25 +0200 Subject: dsa: mv88e6xxx: Fix MTU definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MTU passed to the DSA driver is the payload size, typically 1500. However, the switch uses the frame size when applying restrictions. Adjust the MTU with the size of the Ethernet header and the frame checksum. The VLAN header also needs to be included when the frame size it per port, but not when it is global. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 12 ++++++------ drivers/net/dsa/mv88e6xxx/global1.c | 2 ++ drivers/net/dsa/mv88e6xxx/port.c | 2 ++ 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 86d3cab6ceef..ed4a6d18142b 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2834,8 +2834,8 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) if (err) return err; - /* Port Control 2: don't force a good FCS, set the maximum frame size to - * 10240 bytes, disable 802.1q tags checking, don't discard tagged or + /* Port Control 2: don't force a good FCS, set the MTU size to + * 10222 bytes, disable 802.1q tags checking, don't discard tagged or * untagged frames on this port, do a destination address lookup on all * received packets as usual, disable ARP mirroring and don't send a * copy of all transmitted/received frames on this port to the CPU. @@ -2854,7 +2854,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) return err; if (chip->info->ops->port_set_jumbo_size) { - err = chip->info->ops->port_set_jumbo_size(chip, port, 10240); + err = chip->info->ops->port_set_jumbo_size(chip, port, 10218); if (err) return err; } @@ -2944,10 +2944,10 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; if (chip->info->ops->port_set_jumbo_size) - return 10240; + return 10240 - VLAN_ETH_HLEN - ETH_FCS_LEN; else if (chip->info->ops->set_max_frame_size) - return 1632; - return 1522; + return 1632 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 1522 - VLAN_ETH_HLEN - ETH_FCS_LEN; } static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index 815b0f681d69..5848112036b0 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -232,6 +232,8 @@ int mv88e6185_g1_set_max_frame_size(struct mv88e6xxx_chip *chip, int mtu) u16 val; int err; + mtu += ETH_HLEN + ETH_FCS_LEN; + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index f77e2ee64a60..451028c57af8 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -1277,6 +1277,8 @@ int mv88e6165_port_set_jumbo_size(struct mv88e6xxx_chip *chip, int port, u16 reg; int err; + size += VLAN_ETH_HLEN + ETH_FCS_LEN; + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_CTL2, ®); if (err) return err; -- cgit v1.2.3 From b9c587fed61cf88bd45822c3159644445f6d5aa6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:26 +0200 Subject: dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Same members of the Marvell Ethernet switches impose MTU restrictions on ports used for connecting to the CPU or another switch for DSA. If the MTU is set too low, tagged frames will be discarded. Ensure the worst case tagger overhead is included in setting the MTU for DSA and CPU ports. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 9 ++++++--- drivers/net/dsa/mv88e6xxx/chip.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index ed4a6d18142b..03744d1c43fc 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2944,10 +2944,10 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; if (chip->info->ops->port_set_jumbo_size) - return 10240 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; else if (chip->info->ops->set_max_frame_size) - return 1632 - VLAN_ETH_HLEN - ETH_FCS_LEN; - return 1522 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; + return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; } static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) @@ -2955,6 +2955,9 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) struct mv88e6xxx_chip *chip = ds->priv; int ret = 0; + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) + new_mtu += EDSA_HLEN; + mv88e6xxx_reg_lock(chip); if (chip->info->ops->port_set_jumbo_size) ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu); diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 675b1f3e43b7..59f316cc8583 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -18,6 +18,7 @@ #include #include +#define EDSA_HLEN 8 #define MV88E6XXX_N_FID 4096 /* PVT limits for 4-bit port and 5-bit switch */ -- cgit v1.2.3 From 5c34aea341b16e29fde6e6c8d4b18866cd99754d Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Wed, 22 Sep 2021 10:38:12 -0700 Subject: perf test: Fix DWARF unwind for optimized builds. To ensure the stack frames are on the stack tail calls optimizations need to be inhibited. If your compiler supports an attribute use it, otherwise use an asm volatile barrier. The barrier fix was suggested here: https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/ Tested with an optimized clang build and by forcing the asm barrier route with an optimized clang build. A GCC bug tracking a proper disable_tail_calls is: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831 Fixes: 9ae1e990f1ab ("perf tools: Remove broken __no_tail_call attribute") v2. is a rebase. The original fix patch generated quite a lot of discussion over the right place for the fix: https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/ The patch reflects my preference of it being near the use, so that future code cleanups don't break this somewhat special usage. Signed-off-by: Ian Rogers Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Ard Biesheuvel Cc: Mark Rutland Cc: Miguel Ojeda Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/dwarf-unwind.c | 39 ++++++++++++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 7 deletions(-) diff --git a/tools/perf/tests/dwarf-unwind.c b/tools/perf/tests/dwarf-unwind.c index a288035eb362..c756284b3b13 100644 --- a/tools/perf/tests/dwarf-unwind.c +++ b/tools/perf/tests/dwarf-unwind.c @@ -20,6 +20,23 @@ /* For bsearch. We try to unwind functions in shared object. */ #include +/* + * The test will assert frames are on the stack but tail call optimizations lose + * the frame of the caller. Clang can disable this optimization on a called + * function but GCC currently (11/2020) lacks this attribute. The barrier is + * used to inhibit tail calls in these cases. + */ +#ifdef __has_attribute +#if __has_attribute(disable_tail_calls) +#define NO_TAIL_CALL_ATTRIBUTE __attribute__((disable_tail_calls)) +#define NO_TAIL_CALL_BARRIER +#endif +#endif +#ifndef NO_TAIL_CALL_ATTRIBUTE +#define NO_TAIL_CALL_ATTRIBUTE +#define NO_TAIL_CALL_BARRIER __asm__ __volatile__("" : : : "memory"); +#endif + static int mmap_handler(struct perf_tool *tool __maybe_unused, union perf_event *event, struct perf_sample *sample, @@ -91,7 +108,7 @@ static int unwind_entry(struct unwind_entry *entry, void *arg) return strcmp((const char *) symbol, funcs[idx]); } -noinline int test_dwarf_unwind__thread(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__thread(struct thread *thread) { struct perf_sample sample; unsigned long cnt = 0; @@ -122,7 +139,7 @@ noinline int test_dwarf_unwind__thread(struct thread *thread) static int global_unwind_retval = -INT_MAX; -noinline int test_dwarf_unwind__compare(void *p1, void *p2) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__compare(void *p1, void *p2) { /* Any possible value should be 'thread' */ struct thread *thread = *(struct thread **)p1; @@ -141,7 +158,7 @@ noinline int test_dwarf_unwind__compare(void *p1, void *p2) return p1 - p2; } -noinline int test_dwarf_unwind__krava_3(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_3(struct thread *thread) { struct thread *array[2] = {thread, thread}; void *fp = &bsearch; @@ -160,14 +177,22 @@ noinline int test_dwarf_unwind__krava_3(struct thread *thread) return global_unwind_retval; } -noinline int test_dwarf_unwind__krava_2(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_2(struct thread *thread) { - return test_dwarf_unwind__krava_3(thread); + int ret; + + ret = test_dwarf_unwind__krava_3(thread); + NO_TAIL_CALL_BARRIER; + return ret; } -noinline int test_dwarf_unwind__krava_1(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_1(struct thread *thread) { - return test_dwarf_unwind__krava_2(thread); + int ret; + + ret = test_dwarf_unwind__krava_2(thread); + NO_TAIL_CALL_BARRIER; + return ret; } int test__dwarf_unwind(struct test *test __maybe_unused, int subtest __maybe_unused) -- cgit v1.2.3 From 0f892fd1bd29a25a62c236c5d4f942ee3295ef49 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 6 Sep 2021 16:22:38 +0100 Subject: perf tests: Fix flaky test 'Object code reading' This test occasionally fails on aarch64 when a sample is taken in free@plt and it fails with "Bytes read differ from those read by objdump". This is because that symbol is near a section boundary in the elf file. Despite the -z option to always output zeros, objdump uses bfd_map_over_sections() to iterate through the elf file so it doesn't see outside of the sections where these zeros are and can't print them. For example this boundary proceeds free@plt in libc with a gap of 48 bytes between .plt and .text: objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so libc-2.30.so: file format elf64-littleaarch64 Disassembly of section .plt: 0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>: 23cc8: 91018210 add x16, x16, #0x60 23ccc: d61f0220 br x17 Disassembly of section .text: 0000000000023d00 : 23d00: a9bf7bfd stp x29, x30, [sp, #-16]! 23d04: 910003fd mov x29, sp Taking a sample in free@plt is very rare because it is so small, but the test can be forced to fail almost every time on any platform by linking the test with a shared library that has a single empty function and calling it in a loop. The fix is to zero the buffers so that when there is a jump in the addresses output by objdump, zeros are already filled in between. Signed-off-by: James Clark Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Link: http://lore.kernel.org/lkml/20210906152238.3415467-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/code-reading.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c index 9866cddebf23..9b4a765e4b73 100644 --- a/tools/perf/tests/code-reading.c +++ b/tools/perf/tests/code-reading.c @@ -229,8 +229,8 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode, struct thread *thread, struct state *state) { struct addr_location al; - unsigned char buf1[BUFSZ]; - unsigned char buf2[BUFSZ]; + unsigned char buf1[BUFSZ] = {0}; + unsigned char buf2[BUFSZ] = {0}; size_t ret_len; u64 objdump_addr; const char *objdump_name; -- cgit v1.2.3 From 774f2c0890f8aab5d436276ec52a03532256afc7 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 16 Sep 2021 09:13:14 +0100 Subject: perf vendor events powerpc: Fix spelling mistake "icach" -> "icache" There is a spelling mistake in the description text, fix it. Signed-off-by: Colin King Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: kernel-janitors@vger.kernel.org Link: http://lore.kernel.org/lkml/20210916081314.41751-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/pmu-events/arch/powerpc/power8/other.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/pmu-events/arch/powerpc/power8/other.json b/tools/perf/pmu-events/arch/powerpc/power8/other.json index 84a0cedf1fd9..f1f2965f6775 100644 --- a/tools/perf/pmu-events/arch/powerpc/power8/other.json +++ b/tools/perf/pmu-events/arch/powerpc/power8/other.json @@ -1046,7 +1046,7 @@ { "EventCode": "0x4e010", "EventName": "PM_GCT_NOSLOT_IC_L3MISS", - "BriefDescription": "Gct empty for this thread due to icach l3 miss", + "BriefDescription": "Gct empty for this thread due to icache l3 miss", "PublicDescription": "" }, { -- cgit v1.2.3 From c6613bd4a57798ef0aefbcdb28d8c90d4c9cecd8 Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Thu, 23 Sep 2021 08:42:54 -0700 Subject: perf arm: Fix off-by-one directory paths. Relative path include works in the regular build due to -I paths but may fail in other situations. v2. Rebase. Comments on v1 were that we should handle include paths differently and it is agreed that can be a sensible refactor but beyond the scope of this change. https://lore.kernel.org/lkml/20210504191227.793712-1-irogers@google.com/ Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Garry Cc: Leo Yan Cc: Mark Rutland Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sergey Senozhatsky Cc: Stephane Eranian Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210923154254.737657-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/arm/util/auxtrace.c | 8 ++++---- tools/perf/arch/arm/util/cs-etm.c | 24 ++++++++++++------------ tools/perf/arch/arm/util/perf_regs.c | 2 +- tools/perf/arch/arm/util/pmu.c | 2 +- tools/perf/arch/arm/util/unwind-libdw.c | 6 +++--- tools/perf/arch/arm/util/unwind-libunwind.c | 4 ++-- 6 files changed, 23 insertions(+), 23 deletions(-) diff --git a/tools/perf/arch/arm/util/auxtrace.c b/tools/perf/arch/arm/util/auxtrace.c index c7c7ec0812d5..5fc6a2a3dbc5 100644 --- a/tools/perf/arch/arm/util/auxtrace.c +++ b/tools/perf/arch/arm/util/auxtrace.c @@ -8,10 +8,10 @@ #include #include -#include "../../util/auxtrace.h" -#include "../../util/debug.h" -#include "../../util/evlist.h" -#include "../../util/pmu.h" +#include "../../../util/auxtrace.h" +#include "../../../util/debug.h" +#include "../../../util/evlist.h" +#include "../../../util/pmu.h" #include "cs-etm.h" #include "arm-spe.h" diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c index 515aae470e23..293a23bf8be3 100644 --- a/tools/perf/arch/arm/util/cs-etm.c +++ b/tools/perf/arch/arm/util/cs-etm.c @@ -16,19 +16,19 @@ #include #include "cs-etm.h" -#include "../../util/debug.h" -#include "../../util/record.h" -#include "../../util/auxtrace.h" -#include "../../util/cpumap.h" -#include "../../util/event.h" -#include "../../util/evlist.h" -#include "../../util/evsel.h" -#include "../../util/perf_api_probe.h" -#include "../../util/evsel_config.h" -#include "../../util/pmu.h" -#include "../../util/cs-etm.h" +#include "../../../util/debug.h" +#include "../../../util/record.h" +#include "../../../util/auxtrace.h" +#include "../../../util/cpumap.h" +#include "../../../util/event.h" +#include "../../../util/evlist.h" +#include "../../../util/evsel.h" +#include "../../../util/perf_api_probe.h" +#include "../../../util/evsel_config.h" +#include "../../../util/pmu.h" +#include "../../../util/cs-etm.h" #include // page_size -#include "../../util/session.h" +#include "../../../util/session.h" #include #include diff --git a/tools/perf/arch/arm/util/perf_regs.c b/tools/perf/arch/arm/util/perf_regs.c index 2864e2e3776d..2833e101a7c6 100644 --- a/tools/perf/arch/arm/util/perf_regs.c +++ b/tools/perf/arch/arm/util/perf_regs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -#include "../../util/perf_regs.h" +#include "../../../util/perf_regs.h" const struct sample_reg sample_reg_masks[] = { SMPL_REG_END diff --git a/tools/perf/arch/arm/util/pmu.c b/tools/perf/arch/arm/util/pmu.c index bbc297a7e2e3..b8b23b9dc598 100644 --- a/tools/perf/arch/arm/util/pmu.c +++ b/tools/perf/arch/arm/util/pmu.c @@ -10,7 +10,7 @@ #include #include "arm-spe.h" -#include "../../util/pmu.h" +#include "../../../util/pmu.h" struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused) diff --git a/tools/perf/arch/arm/util/unwind-libdw.c b/tools/perf/arch/arm/util/unwind-libdw.c index 36ba4c69c3c5..b7692cb0c733 100644 --- a/tools/perf/arch/arm/util/unwind-libdw.c +++ b/tools/perf/arch/arm/util/unwind-libdw.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 #include -#include "../../util/unwind-libdw.h" -#include "../../util/perf_regs.h" -#include "../../util/event.h" +#include "../../../util/unwind-libdw.h" +#include "../../../util/perf_regs.h" +#include "../../../util/event.h" bool libdw__arch_set_initial_registers(Dwfl_Thread *thread, void *arg) { diff --git a/tools/perf/arch/arm/util/unwind-libunwind.c b/tools/perf/arch/arm/util/unwind-libunwind.c index 3a550225dfaf..438906bf0014 100644 --- a/tools/perf/arch/arm/util/unwind-libunwind.c +++ b/tools/perf/arch/arm/util/unwind-libunwind.c @@ -3,8 +3,8 @@ #include #include #include "perf_regs.h" -#include "../../util/unwind.h" -#include "../../util/debug.h" +#include "../../../util/unwind.h" +#include "../../../util/debug.h" int libunwind__arch_reg_id(int regnum) { -- cgit v1.2.3 From 4da6552c5d07bfc88576ed9ad7fc81fce4c3ba41 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Fri, 24 Sep 2021 16:19:42 +0800 Subject: perf doc: Fix typos all over the place Considering that perf and its subcommands have so many parameters, the documentation is always the first stop for perf beginners. Fixing some spelling errors will relax the eyes of some readers a little bit. s/specicfication/specification/ s/caheline/cacheline/ s/tranasaction/transaction/ s/complan/complain/ s/sched_wakep/sched_wakeup/ s/possble/possible/ s/methology/methodology/ Signed-off-by: Like Xu Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Jonathan Corbet Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210924081942.38368-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/jitdump-specification.txt | 2 +- tools/perf/Documentation/perf-c2c.txt | 2 +- tools/perf/Documentation/perf-intel-pt.txt | 2 +- tools/perf/Documentation/perf-lock.txt | 2 +- tools/perf/Documentation/perf-script-perl.txt | 2 +- tools/perf/Documentation/perf-script-python.txt | 2 +- tools/perf/Documentation/perf-stat.txt | 2 +- tools/perf/Documentation/topdown.txt | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/perf/Documentation/jitdump-specification.txt b/tools/perf/Documentation/jitdump-specification.txt index 52152d156ad9..79936355d819 100644 --- a/tools/perf/Documentation/jitdump-specification.txt +++ b/tools/perf/Documentation/jitdump-specification.txt @@ -164,7 +164,7 @@ const char unwinding_data[n]: an array of unwinding data, consisting of the EH F The EH Frame header follows the Linux Standard Base (LSB) specification as described in the document at https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/ehframehdr.html -The EH Frame follows the LSB specicfication as described in the document at https://refspecs.linuxbase.org/LSB_3.0.0/LSB-PDA/LSB-PDA/ehframechpt.html +The EH Frame follows the LSB specification as described in the document at https://refspecs.linuxbase.org/LSB_3.0.0/LSB-PDA/LSB-PDA/ehframechpt.html NOTE: The mapped_size is generally either the same as unwind_data_size (if the unwinding data was mapped in memory by the running process) or zero (if the unwinding data is not mapped by the process). If the unwinding data was not mapped, then only the EH Frame Header will be read, which can be used to specify FP based unwinding for a function which does not have unwinding information. diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt index de6beedb7283..3b6a2c84ea02 100644 --- a/tools/perf/Documentation/perf-c2c.txt +++ b/tools/perf/Documentation/perf-c2c.txt @@ -261,7 +261,7 @@ COALESCE User can specify how to sort offsets for cacheline. Following fields are available and governs the final -output fields set for caheline offsets output: +output fields set for cacheline offsets output: tid - coalesced by process TIDs pid - coalesced by process PIDs diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt index 184ba62420f0..db465fa7ee91 100644 --- a/tools/perf/Documentation/perf-intel-pt.txt +++ b/tools/perf/Documentation/perf-intel-pt.txt @@ -883,7 +883,7 @@ and "r" can be combined to get calls and returns. "Transactions" events correspond to the start or end of transactions. The 'flags' field can be used in perf script to determine whether the event is a -tranasaction start, commit or abort. +transaction start, commit or abort. Note that "instructions", "branches" and "transactions" events depend on code flow packets which can be disabled by using the config term "branch=0". Refer diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt index 74d774592196..1b4d452923d7 100644 --- a/tools/perf/Documentation/perf-lock.txt +++ b/tools/perf/Documentation/perf-lock.txt @@ -44,7 +44,7 @@ COMMON OPTIONS -f:: --force:: - Don't complan, do it. + Don't complain, do it. REPORT OPTIONS -------------- diff --git a/tools/perf/Documentation/perf-script-perl.txt b/tools/perf/Documentation/perf-script-perl.txt index 5a1f68122f50..fa4f39d305a7 100644 --- a/tools/perf/Documentation/perf-script-perl.txt +++ b/tools/perf/Documentation/perf-script-perl.txt @@ -54,7 +54,7 @@ all sched_wakeup events in the system: Traces meant to be processed using a script should be recorded with the above option: -a to enable system-wide collection. -The format file for the sched_wakep event defines the following fields +The format file for the sched_wakeup event defines the following fields (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format): ---- diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index 0250dc61cf98..cf4b7f4b625a 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -448,7 +448,7 @@ all sched_wakeup events in the system: Traces meant to be processed using a script should be recorded with the above option: -a to enable system-wide collection. -The format file for the sched_wakep event defines the following fields +The format file for the sched_wakeup event defines the following fields (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format): ---- diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 4c9310be6acc..7e6fb7cbc0f4 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -385,7 +385,7 @@ Aggregate counts per physical processor for system-wide mode measurements. Print metrics or metricgroups specified in a comma separated list. For a group all metrics from the group are added. The events from the metrics are automatically measured. -See perf list output for the possble metrics and metricgroups. +See perf list output for the possible metrics and metricgroups. -A:: --no-aggr:: diff --git a/tools/perf/Documentation/topdown.txt b/tools/perf/Documentation/topdown.txt index c6302df4cf29..a15b93fdcf50 100644 --- a/tools/perf/Documentation/topdown.txt +++ b/tools/perf/Documentation/topdown.txt @@ -2,7 +2,7 @@ Using TopDown metrics in user space ----------------------------------- Intel CPUs (since Sandy Bridge and Silvermont) support a TopDown -methology to break down CPU pipeline execution into 4 bottlenecks: +methodology to break down CPU pipeline execution into 4 bottlenecks: frontend bound, backend bound, bad speculation, retiring. For more details on Topdown see [1][5] -- cgit v1.2.3 From a827c007c75be4f6038f3d879045fb1ab6385d6b Mon Sep 17 00:00:00 2001 From: Like Xu Date: Fri, 24 Sep 2021 19:58:17 +0800 Subject: perf config: Refine error message to eliminate confusion If there is no configuration file at first, the user can write any pair of "key.subkey=value" to the newly created configuration file, while value validation against a valid configurable key is *deferred* until the next execution or the implied execution of "perf config ... ". For example: $ rm ~/.perfconfig $ perf config call-graph.dump-size=65529 $ cat ~/.perfconfig # this file is auto-generated. [call-graph] dump-size = 65529 $ perf config call-graph.dump-size=2048 callchain: Incorrect stack dump size (max 65528): 65529 Error: wrong config key-value pair call-graph.dump-size=65529 The user might expect that the second value 2048 is valid and can be updated to the configuration file, but the error message is very confusing because the first value 65529 is not reported as an error during the last configuration. It is recommended not to change the current behavior of delayed validation (as more effort is needed), but to refine the original error message to *clearly indicate* that the cause of the error is the configuration file. Signed-off-by: Like Xu Acked-by: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210924115817.58689-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c index 4fb5e90d7a57..60ce5908c664 100644 --- a/tools/perf/util/config.c +++ b/tools/perf/util/config.c @@ -801,7 +801,7 @@ int perf_config_set(struct perf_config_set *set, section->name, item->name); ret = fn(key, value, data); if (ret < 0) { - pr_err("Error: wrong config key-value pair %s=%s\n", + pr_err("Error in the given config file: wrong config key-value pair %s=%s\n", key, value); /* * Can't be just a 'break', as perf_config_set__for_each_entry() -- cgit v1.2.3 From e4fe5d7349e0b1c0d3da5b6b3e1efce591e85bd2 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Mon, 27 Sep 2021 16:11:14 +0800 Subject: perf iostat: Use system-wide mode if the target cpu_list is unspecified An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be implemented to work in system-wide mode to ensure that the output from print_header() is consistent with the user documentation perf-iostat.txt, rather than incorrectly assuming that the kernel does not support it: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) \ for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. This error is easily fixed by assigning system-wide mode by default for IOSTAT_RUN only when the target cpu_list is unspecified. Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf") Signed-off-by: Like Xu Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index f6e87b7be5fa..f0ecfda34ece 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -2408,6 +2408,8 @@ int cmd_stat(int argc, const char **argv) goto out; } else if (verbose) iostat_list(evsel_list, &stat_config); + if (iostat_mode == IOSTAT_RUN && !target__has_cpu(&target)) + target.system_wide = true; } if (add_default_attributes()) -- cgit v1.2.3 From 4da8b121884d84476f3d50d46a471471af1aa9df Mon Sep 17 00:00:00 2001 From: Like Xu Date: Mon, 27 Sep 2021 16:11:15 +0800 Subject: perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *' If the 'perf iostat' user specifies two or more iio_root_ports and also specifies the cpu(s) by -C which is not *connected to all* the above iio ports, the iostat_print_metric() will run into trouble: For example: $ perf iostat list S0-uncore_iio_0<0000:16> S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0 $ perf iostat 0000:16,0000:97 -C 1 -- ls port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault (core dumped) perf stat --iostat$DELIMITER$* The core-dump stack says, in the above corner case, the returned (struct perf_counts_values *) count will be NULL, and the caller iostat_print_metric() apparently doesn't not handle this case. 433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); 434 435 if (count->run && count->ena) { (gdb) p count $1 = (struct perf_counts_values *) 0x0 The deeper reason is that there are actually no statistics from the user specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with minimum cost by adding a NULL check in the user space. Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms") Signed-off-by: Like Xu Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/util/iostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c index eeafe97b8105..792cd75ade33 100644 --- a/tools/perf/arch/x86/util/iostat.c +++ b/tools/perf/arch/x86/util/iostat.c @@ -432,7 +432,7 @@ void iostat_print_metric(struct perf_stat_config *config, struct evsel *evsel, u8 die = ((struct iio_root_port *)evsel->priv)->die; struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); - if (count->run && count->ena) { + if (count && count->run && count->ena) { if (evsel->prev_raw_counts && !out->force_header) { struct perf_counts_values *prev_count = perf_counts(evsel->prev_raw_counts, die, 0); -- cgit v1.2.3 From 3b1b6e82fb5e08e2cb355d7b2ee8644ec289de66 Mon Sep 17 00:00:00 2001 From: Xu Liang Date: Mon, 27 Sep 2021 15:03:02 +0800 Subject: net: phy: enhance GPY115 loopback disable function GPY115 need reset PHY when it comes out from loopback mode if the firmware version number (lower 8 bits) is equal to or below 0x76. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Xu Liang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mxl-gpy.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c index 2d5d5081c3b6..5ce1bf03bbd7 100644 --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c @@ -493,6 +493,25 @@ static int gpy_loopback(struct phy_device *phydev, bool enable) return ret; } +static int gpy115_loopback(struct phy_device *phydev, bool enable) +{ + int ret; + int fw_minor; + + if (enable) + return gpy_loopback(phydev, enable); + + ret = phy_read(phydev, PHY_FWV); + if (ret < 0) + return ret; + + fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, ret); + if (fw_minor > 0x0076) + return gpy_loopback(phydev, 0); + + return genphy_soft_reset(phydev); +} + static struct phy_driver gpy_drivers[] = { { PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx), @@ -527,7 +546,7 @@ static struct phy_driver gpy_drivers[] = { .handle_interrupt = gpy_handle_interrupt, .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, - .set_loopback = gpy_loopback, + .set_loopback = gpy115_loopback, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY115C), @@ -544,7 +563,7 @@ static struct phy_driver gpy_drivers[] = { .handle_interrupt = gpy_handle_interrupt, .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, - .set_loopback = gpy_loopback, + .set_loopback = gpy115_loopback, }, { .phy_id = PHY_ID_GPY211B, -- cgit v1.2.3 From d67ed2510d28a1eb33171010d35cf52178cfcbdd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Sep 2021 20:29:51 -0700 Subject: xtensa: use CONFIG_USE_OF instead of CONFIG_OF MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_OF can be set by a randconfig or by a user -- without setting the early flattree option (OF_EARLY_FLATTREE). This causes build errors. However, if randconfig or a user sets USE_OF in the Xtensa config, the right kconfig symbols are set to fix the build. Fixes these build errors: ../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’? 67 | void *dtb_start = __dtb_start; | ^~~~~~~~~~~ ../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area': ../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration] 201 | if (!of_flat_dt_is_compatible(node, "simple-bus")) ../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration] 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len); ../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion] 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len); | ^ ../arch/xtensa/kernel/setup.c: In function 'early_init_devtree': ../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration] 228 | early_init_dt_scan(params); ../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration] 229 | of_scan_flat_dt(xtensa_dt_io_area, NULL); xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr' Fixes: da844a81779e ("xtensa: add device trees support") Fixes: 6cb971114f63 ("xtensa: remap io area defined in device tree") Signed-off-by: Randy Dunlap Signed-off-by: Max Filippov --- arch/xtensa/include/asm/kmem_layout.h | 2 +- arch/xtensa/kernel/setup.c | 12 ++++++------ arch/xtensa/mm/mmu.c | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/xtensa/include/asm/kmem_layout.h b/arch/xtensa/include/asm/kmem_layout.h index 7cbf68ca7106..6fc05cba61a2 100644 --- a/arch/xtensa/include/asm/kmem_layout.h +++ b/arch/xtensa/include/asm/kmem_layout.h @@ -78,7 +78,7 @@ #endif #define XCHAL_KIO_SIZE 0x10000000 -#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF) +#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_USE_OF) #define XCHAL_KIO_PADDR xtensa_get_kio_paddr() #ifndef __ASSEMBLY__ extern unsigned long xtensa_kio_paddr; diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index ed184106e4cf..ee9082a142fe 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -63,7 +63,7 @@ extern unsigned long initrd_end; extern int initrd_below_start_ok; #endif -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF void *dtb_start = __dtb_start; #endif @@ -125,7 +125,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_initrd); #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF static int __init parse_tag_fdt(const bp_tag_t *tag) { @@ -135,7 +135,7 @@ static int __init parse_tag_fdt(const bp_tag_t *tag) __tagtable(BP_TAG_FDT, parse_tag_fdt); -#endif /* CONFIG_OF */ +#endif /* CONFIG_USE_OF */ static int __init parse_tag_cmdline(const bp_tag_t* tag) { @@ -183,7 +183,7 @@ static int __init parse_bootparam(const bp_tag_t *tag) } #endif -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; @@ -232,7 +232,7 @@ void __init early_init_devtree(void *params) strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); } -#endif /* CONFIG_OF */ +#endif /* CONFIG_USE_OF */ /* * Initialize architecture. (Early stage) @@ -253,7 +253,7 @@ void __init init_arch(bp_tag_t *bp_start) if (bp_start) parse_bootparam(bp_start); -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF early_init_devtree(dtb_start); #endif diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 7e4d97dc8bd8..38acda4f04e8 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -101,7 +101,7 @@ void init_mmu(void) void init_kio(void) { -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_USE_OF) /* * Update the IO area mapping in case xtensa_kio_paddr has changed */ -- cgit v1.2.3 From 9523b33cc31cf8ce703f8facee9fd16cba36d5ad Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Sep 2021 14:05:25 -0700 Subject: NIOS2: setup.c: drop unused variable 'dram_start' This is a nuisance when CONFIG_WERROR is set, so drop the variable declaration since the code that used it was removed. ../arch/nios2/kernel/setup.c: In function 'setup_arch': ../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable] 152 | int dram_start; Fixes: 7f7bc20bc41a ("nios2: Don't use _end for calculating min_low_pfn") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Reviewed-by: Mike Rapoport Cc: Andreas Oetken Signed-off-by: Dinh Nguyen --- arch/nios2/kernel/setup.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c index cf8d687a2644..40bc8fb75e0b 100644 --- a/arch/nios2/kernel/setup.c +++ b/arch/nios2/kernel/setup.c @@ -149,8 +149,6 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low, void __init setup_arch(char **cmdline_p) { - int dram_start; - console_verbose(); memory_start = memblock_start_of_DRAM(); -- cgit v1.2.3 From 5c49d1850ddd3240d20dc40b01f593e35a184f38 Mon Sep 17 00:00:00 2001 From: Zhenzhong Duan Date: Sun, 26 Sep 2021 09:55:45 +0800 Subject: KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry, clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i]. Modifying guest_uret_msrs directly is completely broken as 'i' does not point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior loop. By sheer dumb luck, the fallout is limited to "only" failing to preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is benign as it's guaranteed to clear a bit in a guest MSR value, which are always zero at vCPU creation on both x86-64 and i386. Cc: stable@vger.kernel.org Fixes: 8ea8b8d6f869 ("KVM: VMX: Use common x86's uret MSR list as the one true list") Signed-off-by: Zhenzhong Duan Reviewed-by: Sean Christopherson Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 9ecfcf13a046..116b08904ac3 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6848,7 +6848,7 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) */ tsx_ctrl = vmx_find_uret_msr(vmx, MSR_IA32_TSX_CTRL); if (tsx_ctrl) - vmx->guest_uret_msrs[i].mask = ~(u64)TSX_CTRL_CPUID_CLEAR; + tsx_ctrl->mask = ~(u64)TSX_CTRL_CPUID_CLEAR; } err = alloc_loaded_vmcs(&vmx->vmcs01); -- cgit v1.2.3 From a89936cce87d60766a75732a9e7e25c51164f47c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:17 +0200 Subject: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index c14e65a5d38f..c62fec75987c 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -264,7 +264,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, int res; int i; struct tty_driver *tty; - char name[20]; struct ipoctal_channel *channel; struct ipack_region *region; void __iomem *addr; @@ -355,8 +354,11 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, /* Fill struct tty_driver with ipoctal data */ tty->owner = THIS_MODULE; tty->driver_name = KBUILD_MODNAME; - sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot); - tty->name = name; + tty->name = kasprintf(GFP_KERNEL, KBUILD_MODNAME ".%d.%d.", bus_nr, slot); + if (!tty->name) { + res = -ENOMEM; + goto err_put_driver; + } tty->major = 0; tty->minor_start = 0; @@ -371,8 +373,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, res = tty_register_driver(tty); if (res) { dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n"); - tty_driver_kref_put(tty); - return res; + goto err_free_name; } /* Save struct tty_driver for use it when uninstalling the device */ @@ -409,6 +410,13 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, ipoctal_irq_handler, ipoctal); return 0; + +err_free_name: + kfree(tty->name); +err_put_driver: + tty_driver_kref_put(tty); + + return res; } static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel, @@ -696,6 +704,7 @@ static void __ipoctal_remove(struct ipoctal *ipoctal) } tty_unregister_driver(ipoctal->tty_drv); + kfree(ipoctal->tty_drv->name); tty_driver_kref_put(ipoctal->tty_drv); kfree(ipoctal); } -- cgit v1.2.3 From 65c001df517a7bf9be8621b53d43c89f426ce8d6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:18 +0200 Subject: ipack: ipoctal: fix tty registration race Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index c62fec75987c..262451343127 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -392,13 +392,13 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, spin_lock_init(&channel->lock); channel->pointer_read = 0; channel->pointer_write = 0; - tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL); + tty_dev = tty_port_register_device_attr(&channel->tty_port, tty, + i, NULL, channel, NULL); if (IS_ERR(tty_dev)) { dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n"); tty_port_destroy(&channel->tty_port); continue; } - dev_set_drvdata(tty_dev, channel); } /* -- cgit v1.2.3 From cd20d59291d1790dc74248476e928f57fc455189 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:19 +0200 Subject: ipack: ipoctal: fix tty-registration error handling Registration of the ipoctal tty devices is unlikely to fail, but if it ever does, make sure not to deregister a never registered tty device (and dereference a NULL pointer) when the driver is later unbound. Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 262451343127..d6875aa6a295 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -33,6 +33,7 @@ struct ipoctal_channel { unsigned int pointer_read; unsigned int pointer_write; struct tty_port tty_port; + bool tty_registered; union scc2698_channel __iomem *regs; union scc2698_block __iomem *block_regs; unsigned int board_id; @@ -396,9 +397,11 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, i, NULL, channel, NULL); if (IS_ERR(tty_dev)) { dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n"); + tty_port_free_xmit_buf(&channel->tty_port); tty_port_destroy(&channel->tty_port); continue; } + channel->tty_registered = true; } /* @@ -698,6 +701,10 @@ static void __ipoctal_remove(struct ipoctal *ipoctal) for (i = 0; i < NR_CHANNELS; i++) { struct ipoctal_channel *channel = &ipoctal->channel[i]; + + if (!channel->tty_registered) + continue; + tty_unregister_device(ipoctal->tty_drv, i); tty_port_free_xmit_buf(&channel->tty_port); tty_port_destroy(&channel->tty_port); -- cgit v1.2.3 From 445c8132727728dc297492a7d9fc074af3e94ba3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:20 +0200 Subject: ipack: ipoctal: fix missing allocation-failure check Add the missing error handling when allocating the transmit buffer to avoid dereferencing a NULL pointer in write() should the allocation ever fail. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index d6875aa6a295..61c41f535510 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -385,7 +385,9 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, channel = &ipoctal->channel[i]; tty_port_init(&channel->tty_port); - tty_port_alloc_xmit_buf(&channel->tty_port); + res = tty_port_alloc_xmit_buf(&channel->tty_port); + if (res) + continue; channel->tty_port.ops = &ipoctal_tty_port_ops; ipoctal_reset_stats(&channel->stats); -- cgit v1.2.3 From bb8a4fcb2136508224c596a7e665bdba1d7c3c27 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:21 +0200 Subject: ipack: ipoctal: fix module reference leak A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod") Cc: stable@vger.kernel.org # 3.18 Cc: Federico Vaga Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 61c41f535510..c709861198e5 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -82,22 +82,34 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty) return 0; } -static int ipoctal_open(struct tty_struct *tty, struct file *file) +static int ipoctal_install(struct tty_driver *driver, struct tty_struct *tty) { struct ipoctal_channel *channel = dev_get_drvdata(tty->dev); struct ipoctal *ipoctal = chan_to_ipoctal(channel, tty->index); - int err; - - tty->driver_data = channel; + int res; if (!ipack_get_carrier(ipoctal->dev)) return -EBUSY; - err = tty_port_open(&channel->tty_port, tty, file); - if (err) - ipack_put_carrier(ipoctal->dev); + res = tty_standard_install(driver, tty); + if (res) + goto err_put_carrier; + + tty->driver_data = channel; + + return 0; + +err_put_carrier: + ipack_put_carrier(ipoctal->dev); + + return res; +} + +static int ipoctal_open(struct tty_struct *tty, struct file *file) +{ + struct ipoctal_channel *channel = tty->driver_data; - return err; + return tty_port_open(&channel->tty_port, tty, file); } static void ipoctal_reset_stats(struct ipoctal_stats *stats) @@ -661,6 +673,7 @@ static void ipoctal_cleanup(struct tty_struct *tty) static const struct tty_operations ipoctal_fops = { .ioctl = NULL, + .install = ipoctal_install, .open = ipoctal_open, .close = ipoctal_close, .write = ipoctal_write_tty, -- cgit v1.2.3 From 2f9602870886af74d97bac23ee6db5f5466d0a49 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 17 Sep 2021 17:58:13 -0600 Subject: selftests: drivers/dma-buf: Fix implicit declaration warns udmabuf has the following implicit declaration warns: udmabuf.c:30:10: warning: implicit declaration of function 'open'; udmabuf.c:42:8: warning: implicit declaration of function 'fcntl' These are caused due to not including fcntl.h and including just linux/fcntl.h. Fix it to include fcntl.h which will bring in the linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error that show up when just fcntl.h is included. udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~ udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~~~ Signed-off-by: Shuah Khan --- tools/testing/selftests/drivers/dma-buf/udmabuf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c index 4de902ea14d8..de1c4e6de0b2 100644 --- a/tools/testing/selftests/drivers/dma-buf/udmabuf.c +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 +#define _GNU_SOURCE +#define __EXPORTED_HEADERS__ + #include #include #include #include #include -#include +#include #include #include -- cgit v1.2.3 From 4329c8dc110b25d5f04ed20c6821bb60deff279f Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 8 Sep 2021 10:52:36 -0700 Subject: e100: fix length calculation in e100_get_regs_len commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e100.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 373eb027b925..588a59546d12 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2441,7 +2441,11 @@ static void e100_get_drvinfo(struct net_device *netdev, static int e100_get_regs_len(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); - return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf); + + /* We know the number of registers, and the size of the dump buffer. + * Calculate the total size in bytes. + */ + return (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf); } static void e100_get_regs(struct net_device *netdev, -- cgit v1.2.3 From 51032e6f17ce990d06123ad7307f258c50d25aa7 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 8 Sep 2021 10:52:37 -0700 Subject: e100: fix buffer overrun in e100_get_regs The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Tested-by: Jacob Keller Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e100.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 588a59546d12..09ae1939e6db 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2437,7 +2437,7 @@ static void e100_get_drvinfo(struct net_device *netdev, sizeof(info->bus_info)); } -#define E100_PHY_REGS 0x1C +#define E100_PHY_REGS 0x1D static int e100_get_regs_len(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); @@ -2459,14 +2459,18 @@ static void e100_get_regs(struct net_device *netdev, buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | ioread8(&nic->csr->scb.cmd_lo) << 16 | ioread16(&nic->csr->scb.status); - for (i = E100_PHY_REGS; i >= 0; i--) - buff[1 + E100_PHY_REGS - i] = - mdio_read(netdev, nic->mii.phy_id, i); + for (i = 0; i < E100_PHY_REGS; i++) + /* Note that we read the registers in reverse order. This + * ordering is the ABI apparently used by ethtool and other + * applications. + */ + buff[1 + i] = mdio_read(netdev, nic->mii.phy_id, + E100_PHY_REGS - 1 - i); memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf)); e100_exec_cb(nic, NULL, e100_dump); msleep(10); - memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf, - sizeof(nic->mem->dump_buf)); + memcpy(&buff[1 + E100_PHY_REGS], nic->mem->dump_buf, + sizeof(nic->mem->dump_buf)); } static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) -- cgit v1.2.3 From a2941f6aa71a72be2c82c0a168523a492d093530 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 27 Sep 2021 08:43:06 -0700 Subject: nvme: add command id quirk for apple controllers Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter Reported-by: Orlando Chamberlain Reported-by: Aditya Garg Signed-off-by: Keith Busch Reviewed-by: Christoph Hellwig Tested-by: Sven Peter Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 4 +++- drivers/nvme/host/nvme.h | 6 ++++++ drivers/nvme/host/pci.c | 3 ++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e486845d2c7e..7712a8f78337 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -978,6 +978,7 @@ EXPORT_SYMBOL_GPL(nvme_cleanup_cmd); blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) { struct nvme_command *cmd = nvme_req(req)->cmd; + struct nvme_ctrl *ctrl = nvme_req(req)->ctrl; blk_status_t ret = BLK_STS_OK; if (!(req->rq_flags & RQF_DONTPREP)) { @@ -1026,7 +1027,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) return BLK_STS_IOERR; } - nvme_req(req)->genctr++; + if (!(ctrl->quirks & NVME_QUIRK_SKIP_CID_GEN)) + nvme_req(req)->genctr++; cmd->common.command_id = nvme_cid(req); trace_nvme_setup_cmd(req, cmd); return ret; diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 9871c0c9374c..ed79a6c7e804 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -138,6 +138,12 @@ enum nvme_quirks { * 48 bits. */ NVME_QUIRK_DMA_ADDRESS_BITS_48 = (1 << 16), + + /* + * The controller requires the command_id value be be limited, so skip + * encoding the generation sequence number. + */ + NVME_QUIRK_SKIP_CID_GEN = (1 << 17), }; /* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b82492cd7503..456a0e8a5718 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3369,7 +3369,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2005), .driver_data = NVME_QUIRK_SINGLE_VECTOR | NVME_QUIRK_128_BYTES_SQES | - NVME_QUIRK_SHARED_TAGS }, + NVME_QUIRK_SHARED_TAGS | + NVME_QUIRK_SKIP_CID_GEN }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { 0, } -- cgit v1.2.3 From 6489f8d0e1d93a3603d8dad8125797559e4cf2a2 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 27 Sep 2021 09:46:33 -0700 Subject: xtensa: call irqchip_init only when CONFIG_USE_OF is selected During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a81779e ("xtensa: add device trees support") Signed-off-by: Max Filippov --- arch/xtensa/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index 764b54bef701..15051a8a1539 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -143,7 +143,7 @@ unsigned xtensa_get_ext_irq_no(unsigned irq) void __init init_IRQ(void) { -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF irqchip_init(); #else #ifdef CONFIG_HAVE_SMP -- cgit v1.2.3 From 78f8876c2d9f6fdeb9ff62ed1911505156cd7b3d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Sep 2021 10:04:10 -0600 Subject: io-wq: exclusively gate signal based exit on get_signal() return io-wq threads block all signals, except SIGKILL and SIGSTOP. We should not need any extra checking of signal_pending or fatal_signal_pending, rely exclusively on whether or not get_signal() tells us to exit. The original debugging of this issue led to the false positive that we were exiting on non-fatal signals, but that is not the case. The issue was around races with nr_workers accounting. Fixes: 87c169665578 ("io-wq: ensure we exit if thread group is exiting") Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals") Reported-by: Eric W. Biederman Reported-by: Linus Torvalds Acked-by: "Eric W. Biederman" Signed-off-by: Jens Axboe --- fs/io-wq.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/io-wq.c b/fs/io-wq.c index c2360cdc403d..5bf8aa81715e 100644 --- a/fs/io-wq.c +++ b/fs/io-wq.c @@ -584,10 +584,7 @@ loop: if (!get_signal(&ksig)) continue; - if (fatal_signal_pending(current) || - signal_group_exit(current->signal)) - break; - continue; + break; } last_timeout = !ret; } -- cgit v1.2.3 From 7d5cfafe8b4006a75b55c2f1fdfdb363f9a5cc98 Mon Sep 17 00:00:00 2001 From: Guo Zhi Date: Wed, 22 Sep 2021 21:48:57 +0800 Subject: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. Fixes: 042a00f93aad ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev") Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn Signed-off-by: Guo Zhi Acked-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/ipoib_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c index e74ddbe46589..15b0cb0f363f 100644 --- a/drivers/infiniband/hw/hfi1/ipoib_tx.c +++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c @@ -876,14 +876,14 @@ void hfi1_ipoib_tx_timeout(struct net_device *dev, unsigned int q) struct hfi1_ipoib_txq *txq = &priv->txqs[q]; u64 completed = atomic64_read(&txq->complete_txreqs); - dd_dev_info(priv->dd, "timeout txq %llx q %u stopped %u stops %d no_desc %d ring_full %d\n", - (unsigned long long)txq, q, + dd_dev_info(priv->dd, "timeout txq %p q %u stopped %u stops %d no_desc %d ring_full %d\n", + txq, q, __netif_subqueue_stopped(dev, txq->q_idx), atomic_read(&txq->stops), atomic_read(&txq->no_desc), atomic_read(&txq->ring_full)); - dd_dev_info(priv->dd, "sde %llx engine %u\n", - (unsigned long long)txq->sde, + dd_dev_info(priv->dd, "sde %p engine %u\n", + txq->sde, txq->sde ? txq->sde->this_idx : 0); dd_dev_info(priv->dd, "flow %x\n", txq->flow.as_int); dd_dev_info(priv->dd, "sent %llu completed %llu used %llu\n", -- cgit v1.2.3 From cc26aee100588a3f293921342a307b6309ace193 Mon Sep 17 00:00:00 2001 From: Wenpeng Liang Date: Mon, 27 Sep 2021 20:55:56 +0800 Subject: RDMA/hns: Fix the size setting error when copying CQE in clean_cq() The size of CQE is different for different versions of hardware, so the driver needs to specify the size of CQE explicitly. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index a9c00a2e8ebd..d5f3faa1627a 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -3299,7 +3299,7 @@ static void __hns_roce_v2_cq_clean(struct hns_roce_cq *hr_cq, u32 qpn, dest = get_cqe_v2(hr_cq, (prod_index + nfreed) & hr_cq->ib_cq.cqe); owner_bit = hr_reg_read(dest, CQE_OWNER); - memcpy(dest, cqe, sizeof(*cqe)); + memcpy(dest, cqe, hr_cq->cqe_size); hr_reg_write(dest, CQE_OWNER, owner_bit); } } -- cgit v1.2.3 From e671f0ecfece14940a9bb81981098910ea278cf7 Mon Sep 17 00:00:00 2001 From: Wenpeng Liang Date: Mon, 27 Sep 2021 20:55:57 +0800 Subject: RDMA/hns: Add the check of the CQE size of the user space If the CQE size of the user space is not the size supported by the hardware, the creation of CQ should be stopped. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_cq.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_cq.c b/drivers/infiniband/hw/hns/hns_roce_cq.c index 1e9c3c5bee68..d763f097599f 100644 --- a/drivers/infiniband/hw/hns/hns_roce_cq.c +++ b/drivers/infiniband/hw/hns/hns_roce_cq.c @@ -326,19 +326,30 @@ static void set_cq_param(struct hns_roce_cq *hr_cq, u32 cq_entries, int vector, INIT_LIST_HEAD(&hr_cq->rq_list); } -static void set_cqe_size(struct hns_roce_cq *hr_cq, struct ib_udata *udata, - struct hns_roce_ib_create_cq *ucmd) +static int set_cqe_size(struct hns_roce_cq *hr_cq, struct ib_udata *udata, + struct hns_roce_ib_create_cq *ucmd) { struct hns_roce_dev *hr_dev = to_hr_dev(hr_cq->ib_cq.device); - if (udata) { - if (udata->inlen >= offsetofend(typeof(*ucmd), cqe_size)) - hr_cq->cqe_size = ucmd->cqe_size; - else - hr_cq->cqe_size = HNS_ROCE_V2_CQE_SIZE; - } else { + if (!udata) { hr_cq->cqe_size = hr_dev->caps.cqe_sz; + return 0; + } + + if (udata->inlen >= offsetofend(typeof(*ucmd), cqe_size)) { + if (ucmd->cqe_size != HNS_ROCE_V2_CQE_SIZE && + ucmd->cqe_size != HNS_ROCE_V3_CQE_SIZE) { + ibdev_err(&hr_dev->ib_dev, + "invalid cqe size %u.\n", ucmd->cqe_size); + return -EINVAL; + } + + hr_cq->cqe_size = ucmd->cqe_size; + } else { + hr_cq->cqe_size = HNS_ROCE_V2_CQE_SIZE; } + + return 0; } int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr, @@ -366,7 +377,9 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr, set_cq_param(hr_cq, attr->cqe, attr->comp_vector, &ucmd); - set_cqe_size(hr_cq, udata, &ucmd); + ret = set_cqe_size(hr_cq, udata, &ucmd); + if (ret) + return ret; ret = alloc_cq_buf(hr_dev, hr_cq, udata, ucmd.buf_addr); if (ret) { -- cgit v1.2.3 From 9b3b353ef330e20bc2d99bf3165cc044cff26a09 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 27 Sep 2021 11:26:21 -0700 Subject: vboxfs: fix broken legacy mount signature checking Commit 9d682ea6bcc7 ("vboxsf: Fix the check for the old binary mount-arguments struct") was meant to fix a build error due to sign mismatch in 'char' and the use of character constants, but it just moved the error elsewhere, in that on some architectures characters and signed and on others they are unsigned, and that's just how the C standard works. The proper fix is a simple "don't do that then". The code was just being silly and odd, and it should never have cared about signed vs unsigned characters in the first place, since what it is testing is not four "characters", but four bytes. And the way to compare four bytes is by using "memcmp()". Which compilers will know to just turn into a single 32-bit compare with a constant, as long as you don't have crazy debug options enabled. Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/ Cc: Arnd Bergmann Cc: Hans de Goede Signed-off-by: Linus Torvalds --- fs/vboxsf/super.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/fs/vboxsf/super.c b/fs/vboxsf/super.c index 4f5e59f06284..37dd3fe5b1e9 100644 --- a/fs/vboxsf/super.c +++ b/fs/vboxsf/super.c @@ -21,10 +21,7 @@ #define VBOXSF_SUPER_MAGIC 0x786f4256 /* 'VBox' little endian */ -#define VBSF_MOUNT_SIGNATURE_BYTE_0 ('\000') -#define VBSF_MOUNT_SIGNATURE_BYTE_1 ('\377') -#define VBSF_MOUNT_SIGNATURE_BYTE_2 ('\376') -#define VBSF_MOUNT_SIGNATURE_BYTE_3 ('\375') +static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375"; static int follow_symlinks; module_param(follow_symlinks, int, 0444); @@ -386,12 +383,7 @@ fail_nomem: static int vboxsf_parse_monolithic(struct fs_context *fc, void *data) { - unsigned char *options = data; - - if (options && options[0] == VBSF_MOUNT_SIGNATURE_BYTE_0 && - options[1] == VBSF_MOUNT_SIGNATURE_BYTE_1 && - options[2] == VBSF_MOUNT_SIGNATURE_BYTE_2 && - options[3] == VBSF_MOUNT_SIGNATURE_BYTE_3) { + if (data && !memcmp(data, VBSF_MOUNT_SIGNATURE, 4)) { vbg_err("vboxsf: Old binary mount data not supported, remove obsolete mount.vboxsf and/or update your VBoxService.\n"); return -EINVAL; } -- cgit v1.2.3 From f060db99374e80e853ac4916b49f0a903f65e9dc Mon Sep 17 00:00:00 2001 From: Jia He Date: Wed, 22 Sep 2021 23:29:19 +0800 Subject: ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect When ACPI NFIT table is failing to populate correct numa information on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver. Without this patch, pmem can't be probed as RAM devices on arm64 guest: $ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1 kmem: probe of dax0.0 failed with error -22 Suggested-by: Dan Williams Signed-off-by: Jia He Cc: Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index a3ef6cce644c..7dd80acf92c7 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -3007,6 +3007,18 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc, ndr_desc->target_node = NUMA_NO_NODE; } + /* Fallback to address based numa information if node lookup failed */ + if (ndr_desc->numa_node == NUMA_NO_NODE) { + ndr_desc->numa_node = memory_add_physaddr_to_nid(spa->address); + dev_info(acpi_desc->dev, "changing numa node from %d to %d for nfit region [%pa-%pa]", + NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end); + } + if (ndr_desc->target_node == NUMA_NO_NODE) { + ndr_desc->target_node = phys_to_target_node(spa->address); + dev_info(acpi_desc->dev, "changing target node from %d to %d for nfit region [%pa-%pa]", + NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end); + } + /* * Persistence domain bits are hierarchical, if * ACPI_NFIT_CAPABILITY_CACHE_FLUSH is set then -- cgit v1.2.3 From d55174cccac2e4c2a58ff68b6b573fc0836f73bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 22 Sep 2021 19:34:29 +0200 Subject: nvdimm/pmem: fix creating the dax group The recent block layer refactoring broke the way how the pmem driver abused device_add_disk. Fix this by properly passing the attribute groups to device_add_disk. Fixes: 52b85909f85d ("block: fold register_disk into device_add_disk") Signed-off-by: Christoph Hellwig Reviewed-by: Ira Weiny Reviewed-by: Dan Williams Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210922173431.2454024-2-hch@lst.de Signed-off-by: Dan Williams --- drivers/nvdimm/pmem.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 72de88ff0d30..ef4950f80832 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -380,7 +380,6 @@ static int pmem_attach_disk(struct device *dev, struct nd_pfn_sb *pfn_sb; struct pmem_device *pmem; struct request_queue *q; - struct device *gendev; struct gendisk *disk; void *addr; int rc; @@ -489,10 +488,8 @@ static int pmem_attach_disk(struct device *dev, } dax_write_cache(dax_dev, nvdimm_has_cache(nd_region)); pmem->dax_dev = dax_dev; - gendev = disk_to_dev(disk); - gendev->groups = pmem_attribute_groups; - device_add_disk(dev, disk, NULL); + device_add_disk(dev, disk, pmem_attribute_groups); if (devm_add_action_or_reset(dev, pmem_release_disk, pmem)) return -ENOMEM; -- cgit v1.2.3 From c388a18957efdf31db8e97ec4d2d4b7dc1ca9a44 Mon Sep 17 00:00:00 2001 From: Jackie Liu Date: Mon, 13 Sep 2021 15:32:20 +0800 Subject: watchdog/sb_watchdog: fix compilation problem due to COMPILE_TEST Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES. In arch/mips/sibyte/Platform like: cflags-$(CONFIG_SIBYTE_BCM112X) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL. SIBYTE_HDR_FMASK_ALL is mean: #define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ | SIBYTE_HDR_FMASK_1480_ALL) So, If not limited to CPU_SB1, we will get such an error: arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror] arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror] Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu Reviewed-by: Guenter Roeck Signed-off-by: Linus Torvalds --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b81fe4f7d434..bf59faeb3de1 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1666,7 +1666,7 @@ config WDT_MTX1 config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" - depends on CPU_SB1 || (MIPS && COMPILE_TEST) + depends on CPU_SB1 help Watchdog driver for the built in watchdog hardware in Sibyte SoC processors. There are apparently two watchdog timers -- cgit v1.2.3 From 2a2a79577ddae7d5314b2f57ca86b44d794403d5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Sep 2021 14:44:03 +0100 Subject: fpga: ice40-spi: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Signed-off-by: Moritz Fischer --- drivers/fpga/ice40-spi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c index 69dec5af23c3..029d3cdb918d 100644 --- a/drivers/fpga/ice40-spi.c +++ b/drivers/fpga/ice40-spi.c @@ -192,12 +192,19 @@ static const struct of_device_id ice40_fpga_of_match[] = { }; MODULE_DEVICE_TABLE(of, ice40_fpga_of_match); +static const struct spi_device_id ice40_fpga_spi_ids[] = { + { .name = "ice40-fpga-mgr", }, + {}, +}; +MODULE_DEVICE_TABLE(spi, ice40_fpga_spi_ids); + static struct spi_driver ice40_fpga_driver = { .probe = ice40_fpga_probe, .driver = { .name = "ice40spi", .of_match_table = of_match_ptr(ice40_fpga_of_match), }, + .id_table = ice40_fpga_spi_ids, }; module_spi_driver(ice40_fpga_driver); -- cgit v1.2.3 From b8cf5584ec5b8c67359328b8b03b46657620f304 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 28 Sep 2021 15:04:04 +0900 Subject: MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entry commit 23e91d8b7c5a("cifs: rename cifs_common to smbfs_common") cause the following warning from get_maintainer.pl. ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: fs/cifs_common/ This patch rename cifs_common to smbfs_common in cifs and ksmbd entry. Reported-by: Lukas Bulwahn Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b33791bb8e9..8a8c0e6eb458 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4655,7 +4655,7 @@ W: http://linux-cifs.samba.org/ T: git git://git.samba.org/sfrench/cifs-2.6.git F: Documentation/admin-guide/cifs/ F: fs/cifs/ -F: fs/cifs_common/ +F: fs/smbfs_common/ COMPACTPCI HOTPLUG CORE M: Scott Murray @@ -10193,8 +10193,8 @@ M: Hyunchul Lee L: linux-cifs@vger.kernel.org S: Maintained T: git git://git.samba.org/ksmbd.git -F: fs/cifs_common/ F: fs/ksmbd/ +F: fs/smbfs_common/ KERNEL UNIT TESTING FRAMEWORK (KUnit) M: Brendan Higgins -- cgit v1.2.3 From fe5c735d0d47b495be6753d6aea4f8f78c909a0a Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 24 Sep 2021 15:21:54 +0300 Subject: iwlwifi: pcie: add configuration of a Wi-Fi adapter on Dell XPS 15 There is a Killer AX1650 2x2 Wi-Fi 6 and Bluetooth 5.1 wireless adapter found on Dell XPS 15 (9510) laptop, its configuration was present on Linux v5.7, however accidentally it has been removed from the list of supported devices, let's add it back. The problem is manifested on driver initialization: Intel(R) Wireless WiFi driver for Linux iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) iwlwifi: No config found for PCI dev 43f0/1651, rev=0x354, rfid=0x10a100 iwlwifi: probe of 0000:00:14.3 failed with error -22 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213939 Fixes: 3f910a25839b ("iwlwifi: pcie: convert all AX101 devices to the device tables") Cc: Julien Wajsberg Signed-off-by: Vladimir Zapolskiy Acked-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210924122154.2376577-1-vladimir.zapolskiy@linaro.org --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 61b2797a34a8..e3996ff99bad 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -547,6 +547,8 @@ static const struct iwl_dev_info iwl_dev_info_table[] = { IWL_DEV_INFO(0x43F0, 0x0074, iwl_ax201_cfg_qu_hr, NULL), IWL_DEV_INFO(0x43F0, 0x0078, iwl_ax201_cfg_qu_hr, NULL), IWL_DEV_INFO(0x43F0, 0x007C, iwl_ax201_cfg_qu_hr, NULL), + IWL_DEV_INFO(0x43F0, 0x1651, killer1650s_2ax_cfg_qu_b0_hr_b0, iwl_ax201_killer_1650s_name), + IWL_DEV_INFO(0x43F0, 0x1652, killer1650i_2ax_cfg_qu_b0_hr_b0, iwl_ax201_killer_1650i_name), IWL_DEV_INFO(0x43F0, 0x2074, iwl_ax201_cfg_qu_hr, NULL), IWL_DEV_INFO(0x43F0, 0x4070, iwl_ax201_cfg_qu_hr, NULL), IWL_DEV_INFO(0xA0F0, 0x0070, iwl_ax201_cfg_qu_hr, NULL), -- cgit v1.2.3 From 151a7c12c4fc8340b51e849e4d1fcb7d794777a5 Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Sun, 26 Sep 2021 22:19:05 +0200 Subject: Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback" This reverts commit b0b524f079a23e440dd22b04e369368dde847533. Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev as fallback") changes country setup to directly use ISO3166 country codes if no more specific code is configured. This was done under the assumption that brcmfmac firmwares can handle such simple direct mapping from country codes to firmware ccode values. Unfortunately this is not true for all chipset/firmware combinations. E.g. BCM4359/9 devices stop working as access point with this change, so revert the offending commit to avoid the regression. Signed-off-by: Soeren Moch Cc: stable@vger.kernel.org # 5.14.x Acked-by: Shawn Guo Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210926201905.211605-1-smoch@web.de --- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index f7b96cd69242..9db12ffd2ff8 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -7463,23 +7463,18 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], s32 found_index; int i; + country_codes = drvr->settings->country_codes; + if (!country_codes) { + brcmf_dbg(TRACE, "No country codes configured for device\n"); + return -EINVAL; + } + if ((alpha2[0] == ccreq->country_abbrev[0]) && (alpha2[1] == ccreq->country_abbrev[1])) { brcmf_dbg(TRACE, "Country code already set\n"); return -EAGAIN; } - country_codes = drvr->settings->country_codes; - if (!country_codes) { - brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n"); - memset(ccreq, 0, sizeof(*ccreq)); - ccreq->country_abbrev[0] = alpha2[0]; - ccreq->country_abbrev[1] = alpha2[1]; - ccreq->ccode[0] = alpha2[0]; - ccreq->ccode[1] = alpha2[1]; - return 0; - } - found_index = -1; for (i = 0; i < country_codes->table_size; i++) { cc = &country_codes->table[i]; -- cgit v1.2.3 From 1dc1eed46f9fa4cb8a07baa24fb44c96d6dd35c9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 27 Sep 2021 11:23:57 +0200 Subject: ovl: fix IOCB_DIRECT if underlying fs doesn't support direct IO Normally the check at open time suffices, but e.g loop device does set IOCB_DIRECT after doing its own checks (which are not sufficent for overlayfs). Make sure we don't call the underlying filesystem read/write method with the IOCB_DIRECT if it's not supported. Reported-by: Huang Jianan Fixes: 16914e6fc7e1 ("ovl: add ovl_read_iter()") Cc: # v4.19 Tested-by: Huang Jianan Signed-off-by: Miklos Szeredi --- fs/overlayfs/file.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c index d081faa55e83..c88ac571593d 100644 --- a/fs/overlayfs/file.c +++ b/fs/overlayfs/file.c @@ -296,6 +296,12 @@ static ssize_t ovl_read_iter(struct kiocb *iocb, struct iov_iter *iter) if (ret) return ret; + ret = -EINVAL; + if (iocb->ki_flags & IOCB_DIRECT && + (!real.file->f_mapping->a_ops || + !real.file->f_mapping->a_ops->direct_IO)) + goto out_fdput; + old_cred = ovl_override_creds(file_inode(file)->i_sb); if (is_sync_kiocb(iocb)) { ret = vfs_iter_read(real.file, iter, &iocb->ki_pos, @@ -320,7 +326,7 @@ static ssize_t ovl_read_iter(struct kiocb *iocb, struct iov_iter *iter) out: revert_creds(old_cred); ovl_file_accessed(file); - +out_fdput: fdput(real); return ret; @@ -349,6 +355,12 @@ static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter) if (ret) goto out_unlock; + ret = -EINVAL; + if (iocb->ki_flags & IOCB_DIRECT && + (!real.file->f_mapping->a_ops || + !real.file->f_mapping->a_ops->direct_IO)) + goto out_fdput; + if (!ovl_should_sync(OVL_FS(inode->i_sb))) ifl &= ~(IOCB_DSYNC | IOCB_SYNC); @@ -384,6 +396,7 @@ static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter) } out: revert_creds(old_cred); +out_fdput: fdput(real); out_unlock: -- cgit v1.2.3 From 8a98ae12fbefdb583a7696de719a1d57e5e940a2 Mon Sep 17 00:00:00 2001 From: Lorenz Bauer Date: Wed, 22 Sep 2021 12:11:52 +0100 Subject: bpf: Exempt CAP_BPF from checks against bpf_jit_limit When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat programs with CAP_BPF as privileged for the purpose of JIT memory allocation. This means that a program without CAP_BPF can block a program with CAP_BPF from loading a program. Fix this by checking bpf_capable() in bpf_jit_charge_modmem(). Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF") Signed-off-by: Lorenz Bauer Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com --- kernel/bpf/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 9f4636d021b1..d6b7dfdd8066 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -827,7 +827,7 @@ int bpf_jit_charge_modmem(u32 pages) { if (atomic_long_add_return(pages, &bpf_jit_current) > (bpf_jit_limit >> PAGE_SHIFT)) { - if (!capable(CAP_SYS_ADMIN)) { + if (!bpf_capable()) { atomic_long_sub(pages, &bpf_jit_current); return -EPERM; } -- cgit v1.2.3 From b3aa173d58b437cde5aae5fdce7071212628731b Mon Sep 17 00:00:00 2001 From: Dave Marchevsky Date: Fri, 24 Sep 2021 12:35:57 -0700 Subject: MAINTAINERS: Add btf headers to BPF BPF folks maintain these and they're not picked up by the current MAINTAINERS entries. Files caught by the added globs: include/linux/btf.h include/linux/btf_ids.h include/uapi/linux/btf.h Signed-off-by: Dave Marchevsky Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210924193557.3081469-1-davemarchevsky@fb.com --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a594d5d7edcc..d4122d36e627 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3379,9 +3379,11 @@ F: Documentation/networking/filter.rst F: Documentation/userspace-api/ebpf/ F: arch/*/net/* F: include/linux/bpf* +F: include/linux/btf* F: include/linux/filter.h F: include/trace/events/xdp.h F: include/uapi/linux/bpf* +F: include/uapi/linux/btf* F: include/uapi/linux/filter.h F: kernel/bpf/ F: kernel/trace/bpf_trace.c -- cgit v1.2.3 From bcfd367c2839f2126c048fe59700ec1b538e2b06 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Fri, 24 Sep 2021 08:07:25 +0530 Subject: libbpf: Fix segfault in static linker for objects without BTF When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com --- tools/lib/bpf/linker.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/lib/bpf/linker.c b/tools/lib/bpf/linker.c index 10911a8cad0f..2df880cefdae 100644 --- a/tools/lib/bpf/linker.c +++ b/tools/lib/bpf/linker.c @@ -1649,11 +1649,17 @@ static bool btf_is_non_static(const struct btf_type *t) static int find_glob_sym_btf(struct src_obj *obj, Elf64_Sym *sym, const char *sym_name, int *out_btf_sec_id, int *out_btf_id) { - int i, j, n = btf__get_nr_types(obj->btf), m, btf_id = 0; + int i, j, n, m, btf_id = 0; const struct btf_type *t; const struct btf_var_secinfo *vi; const char *name; + if (!obj->btf) { + pr_warn("failed to find BTF info for object '%s'\n", obj->filename); + return -EINVAL; + } + + n = btf__get_nr_types(obj->btf); for (i = 1; i <= n; i++) { t = btf__type_by_id(obj->btf, i); -- cgit v1.2.3 From 78cc316e9583067884eb8bd154301dc1e9ee945c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Sep 2021 14:39:20 +0200 Subject: bpf, cgroup: Assign cgroup in cgroup_sk_alloc when called from interrupt If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224f547 due to commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Tested-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Tested-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Acked-by: Tejun Heo Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net --- kernel/cgroup/cgroup.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 8afa8690d288..570b0c97392a 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -6574,22 +6574,29 @@ int cgroup_parse_float(const char *input, unsigned dec_shift, s64 *v) void cgroup_sk_alloc(struct sock_cgroup_data *skcd) { - /* Don't associate the sock with unrelated interrupted task's cgroup. */ - if (in_interrupt()) - return; + struct cgroup *cgroup; rcu_read_lock(); + /* Don't associate the sock with unrelated interrupted task's cgroup. */ + if (in_interrupt()) { + cgroup = &cgrp_dfl_root.cgrp; + cgroup_get(cgroup); + goto out; + } + while (true) { struct css_set *cset; cset = task_css_set(current); if (likely(cgroup_tryget(cset->dfl_cgrp))) { - skcd->cgroup = cset->dfl_cgrp; - cgroup_bpf_get(cset->dfl_cgrp); + cgroup = cset->dfl_cgrp; break; } cpu_relax(); } +out: + skcd->cgroup = cgroup; + cgroup_bpf_get(cgroup); rcu_read_unlock(); } -- cgit v1.2.3 From 435b08ec0094ac1e128afe6cfd0d9311a8c617a7 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Sep 2021 14:39:21 +0200 Subject: bpf, test, cgroup: Use sk_{alloc,free} for test cases BPF test infra has some hacks in place which kzalloc() a socket and perform minimum init via sock_net_set() and sock_init_data(). As a result, the sk's skcd->cgroup is NULL since it didn't go through proper initialization as it would have been the case from sk_alloc(). Rather than re-adding a NULL test in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test socket. The latter also allows to get rid of the bpf_sk_storage_free() special case. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: b7a1848e8398 ("bpf: add BPF_PROG_TEST_RUN support for flow dissector") Fixes: 2cb494a36c98 ("bpf: add tests for direct packet access from CGROUP_SKB") Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Tested-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Tested-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Link: https://lore.kernel.org/bpf/20210927123921.21535-2-daniel@iogearbox.net --- net/bpf/test_run.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 2eb0e55ef54d..b5f4ef35357c 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -552,6 +552,12 @@ static void convert_skb_to___skb(struct sk_buff *skb, struct __sk_buff *__skb) __skb->gso_segs = skb_shinfo(skb)->gso_segs; } +static struct proto bpf_dummy_proto = { + .name = "bpf_dummy", + .owner = THIS_MODULE, + .obj_size = sizeof(struct sock), +}; + int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, union bpf_attr __user *uattr) { @@ -596,20 +602,19 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, break; } - sk = kzalloc(sizeof(struct sock), GFP_USER); + sk = sk_alloc(net, AF_UNSPEC, GFP_USER, &bpf_dummy_proto, 1); if (!sk) { kfree(data); kfree(ctx); return -ENOMEM; } - sock_net_set(sk, net); sock_init_data(NULL, sk); skb = build_skb(data, 0); if (!skb) { kfree(data); kfree(ctx); - kfree(sk); + sk_free(sk); return -ENOMEM; } skb->sk = sk; @@ -682,8 +687,7 @@ out: if (dev && dev != net->loopback_dev) dev_put(dev); kfree_skb(skb); - bpf_sk_storage_free(sk); - kfree(sk); + sk_free(sk); kfree(ctx); return ret; } -- cgit v1.2.3 From d888eaac4fb1df30320bb1305a8f78efe86524c6 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Mon, 27 Sep 2021 18:01:36 +0200 Subject: selftests, bpf: Fix makefile dependencies on libbpf When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20fba07e but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by: Jiri Benc Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com --- tools/testing/selftests/bpf/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 866531c08e4f..799b88152e9e 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -375,7 +375,8 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o: \ $(TRUNNER_BPF_PROGS_DIR)/%.c \ $(TRUNNER_BPF_PROGS_DIR)/*.h \ $$(INCLUDE_DIR)/vmlinux.h \ - $(wildcard $(BPFDIR)/bpf_*.h) | $(TRUNNER_OUTPUT) + $(wildcard $(BPFDIR)/bpf_*.h) \ + | $(TRUNNER_OUTPUT) $$(BPFOBJ) $$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@, \ $(TRUNNER_BPF_CFLAGS)) -- cgit v1.2.3 From 79e2c306667542b8ee2d9a9d947eadc7039f0a3c Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 23 Sep 2021 10:40:22 +0200 Subject: selftests, bpf: test_lwt_ip_encap: Really disable rp_filter It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Jiri Benc Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com --- tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh index 59ea56945e6c..b497bb85b667 100755 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh @@ -112,6 +112,14 @@ setup() ip netns add "${NS2}" ip netns add "${NS3}" + # rp_filter gets confused by what these tests are doing, so disable it + ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip link add veth1 type veth peer name veth2 ip link add veth3 type veth peer name veth4 ip link add veth5 type veth peer name veth6 @@ -236,11 +244,6 @@ setup() ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) sleep 1 # reduce flakiness -- cgit v1.2.3 From 68223eeec70898cd5e42451a9168cd9b2808e248 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:05 -0700 Subject: driver core: Set deferred probe reason when deferred by driver core When the driver core defers the probe of a device, set the deferred probe reason so that it's easier to debug. The deferred probe reason is available in debugfs under devices_deferred. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 21d4cb5d3767..bf008040b101 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -975,6 +975,7 @@ int device_links_check_suppliers(struct device *dev) { struct device_link *link; int ret = 0; + struct fwnode_handle *sup_fw; /* * Device waiting for supplier to become available is not allowed to @@ -983,10 +984,11 @@ int device_links_check_suppliers(struct device *dev) mutex_lock(&fwnode_link_lock); if (dev->fwnode && !list_empty(&dev->fwnode->suppliers) && !fw_devlink_is_permissive()) { - dev_dbg(dev, "probe deferral - wait for supplier %pfwP\n", - list_first_entry(&dev->fwnode->suppliers, - struct fwnode_link, - c_hook)->supplier); + sup_fw = list_first_entry(&dev->fwnode->suppliers, + struct fwnode_link, + c_hook)->supplier; + dev_err_probe(dev, -EPROBE_DEFER, "wait for supplier %pfwP\n", + sup_fw); mutex_unlock(&fwnode_link_lock); return -EPROBE_DEFER; } @@ -1001,8 +1003,9 @@ int device_links_check_suppliers(struct device *dev) if (link->status != DL_STATE_AVAILABLE && !(link->flags & DL_FLAG_SYNC_STATE_ONLY)) { device_links_missing_supplier(dev); - dev_dbg(dev, "probe deferral - supplier %s not ready\n", - dev_name(link->supplier)); + dev_err_probe(dev, -EPROBE_DEFER, + "supplier %s not ready\n", + dev_name(link->supplier)); ret = -EPROBE_DEFER; break; } -- cgit v1.2.3 From 76f130810b477243ce1312bf5754dc41ce7f91a8 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:06 -0700 Subject: driver core: Create __fwnode_link_del() helper function The same code is repeated in multiple locations. Create a helper function for it. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index bf008040b101..e215220545f8 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -101,6 +101,19 @@ out: return ret; } +/** + * __fwnode_link_del - Delete a link between two fwnode_handles. + * @link: the fwnode_link to be deleted + * + * The fwnode_link_lock needs to be held when this function is called. + */ +static void __fwnode_link_del(struct fwnode_link *link) +{ + list_del(&link->s_hook); + list_del(&link->c_hook); + kfree(link); +} + /** * fwnode_links_purge_suppliers - Delete all supplier links of fwnode_handle. * @fwnode: fwnode whose supplier links need to be deleted @@ -112,11 +125,8 @@ static void fwnode_links_purge_suppliers(struct fwnode_handle *fwnode) struct fwnode_link *link, *tmp; mutex_lock(&fwnode_link_lock); - list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) { - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); - } + list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) + __fwnode_link_del(link); mutex_unlock(&fwnode_link_lock); } @@ -131,11 +141,8 @@ static void fwnode_links_purge_consumers(struct fwnode_handle *fwnode) struct fwnode_link *link, *tmp; mutex_lock(&fwnode_link_lock); - list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) { - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); - } + list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) + __fwnode_link_del(link); mutex_unlock(&fwnode_link_lock); } @@ -1887,9 +1894,7 @@ static void __fw_devlink_link_to_consumers(struct device *dev) if (!own_link || ret == -EAGAIN) continue; - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); + __fwnode_link_del(link); } } @@ -1941,9 +1946,7 @@ static void __fw_devlink_link_to_suppliers(struct device *dev, if (!own_link || ret == -EAGAIN) continue; - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); + __fwnode_link_del(link); /* If no device link was created, nothing more to do. */ if (ret) -- cgit v1.2.3 From ebd6823af378c7d91f80cbe83ce07b5f166744e4 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:07 -0700 Subject: driver core: Add debug logs when fwnode links are added/deleted This will help with debugging fw_devlink issues. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index e215220545f8..15986cc2fe5e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -95,6 +95,8 @@ int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup) list_add(&link->s_hook, &sup->consumers); list_add(&link->c_hook, &con->suppliers); + pr_debug("%pfwP Linked as a fwnode consumer to %pfwP\n", + con, sup); out: mutex_unlock(&fwnode_link_lock); @@ -109,6 +111,8 @@ out: */ static void __fwnode_link_del(struct fwnode_link *link) { + pr_debug("%pfwP Dropping the fwnode link to %pfwP\n", + link->consumer, link->supplier); list_del(&link->s_hook); list_del(&link->c_hook); kfree(link); -- cgit v1.2.3 From f2ff7147c6834f244b8ce636b12e71a3bd044629 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 23 Sep 2021 18:04:25 +0200 Subject: ALSA: pcsp: Make hrtimer forwarding more robust The hrtimer callback pcsp_do_timer() prepares rearming of the timer with hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to forward the expiry time of the hrtimer by a multiple of the period argument so that the expiry time greater than the time provided in the 'now' argument. pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry time as 'now' argument. That's providing a periodic timer expiry, but is not really robust when the timer callback is delayed so that the resulting new expiry time is already in the past which causes the callback to be invoked immediately again. If the timer is delayed then the back to back invocation is not really making it better than skipping the missed periods. Sound is distorted in any case. Use hrtimer_forward_now() which ensures that the next expiry is in the future. This prevents hogging the CPU in the timer expiry code and allows later on to remove hrtimer_forward() from the public interfaces. Signed-off-by: Thomas Gleixner Cc: alsa-devel@alsa-project.org Cc: Takashi Iwai Cc: Jaroslav Kysela Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c index ed40d0f7432c..773db4bf0876 100644 --- a/sound/drivers/pcsp/pcsp_lib.c +++ b/sound/drivers/pcsp/pcsp_lib.c @@ -143,7 +143,7 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) if (pointer_update) pcsp_pointer_update(chip); - hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns)); + hrtimer_forward_now(handle, ns_to_ktime(ns)); return HRTIMER_RESTART; } -- cgit v1.2.3 From 6f87d4e637327b1da3294a7cdad60d49faa32742 Mon Sep 17 00:00:00 2001 From: Sven Peter Date: Tue, 21 Sep 2021 17:39:34 +0200 Subject: iommu/dart: Remove iommu_flush_ops apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain but instead get a struct iommu_domain right now. This breaks those two functions and can lead to kernel panics like the one below. DART can only invalidate the entire TLB and apple_dart_iotlb_sync will already flush everything. There's no need to do that again inside those two functions. Let's just drop them. pci 0000:03:00.0: Removing from iommu group 1 Unable to handle kernel paging request at virtual address 0000000100000023 [...] Call trace: _raw_spin_lock_irqsave+0x54/0xbc apple_dart_hw_stream_command.constprop.0+0x2c/0x130 apple_dart_tlb_flush_all+0x48/0x90 free_io_pgtable_ops+0x40/0x70 apple_dart_domain_free+0x2c/0x44 iommu_group_release+0x68/0xac kobject_cleanup+0x4c/0x1fc kobject_cleanup+0x14c/0x1fc kobject_put+0x64/0x84 iommu_group_remove_device+0x110/0x180 iommu_release_device+0x50/0xa0 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier Signed-off-by: Sven Peter Acked-by: Marc Zyngier Tested-by: Marc Zyngier Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel --- drivers/iommu/apple-dart.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c index 559db9259e65..bc0d9c363184 100644 --- a/drivers/iommu/apple-dart.c +++ b/drivers/iommu/apple-dart.c @@ -183,7 +183,6 @@ struct apple_dart_master_cfg { static struct platform_driver apple_dart_driver; static const struct iommu_ops apple_dart_iommu_ops; -static const struct iommu_flush_ops apple_dart_tlb_ops; static struct apple_dart_domain *to_dart_domain(struct iommu_domain *dom) { @@ -338,22 +337,6 @@ static void apple_dart_iotlb_sync_map(struct iommu_domain *domain, apple_dart_domain_flush_tlb(to_dart_domain(domain)); } -static void apple_dart_tlb_flush_all(void *cookie) -{ - apple_dart_domain_flush_tlb(cookie); -} - -static void apple_dart_tlb_flush_walk(unsigned long iova, size_t size, - size_t granule, void *cookie) -{ - apple_dart_domain_flush_tlb(cookie); -} - -static const struct iommu_flush_ops apple_dart_tlb_ops = { - .tlb_flush_all = apple_dart_tlb_flush_all, - .tlb_flush_walk = apple_dart_tlb_flush_walk, -}; - static phys_addr_t apple_dart_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova) { @@ -435,7 +418,6 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain, .ias = 32, .oas = 36, .coherent_walk = 1, - .tlb = &apple_dart_tlb_ops, .iommu_dev = dart->dev, }; -- cgit v1.2.3 From 0b482d0c75bf321b2fd87d215c3d6df095a601d1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 22 Sep 2021 13:47:26 +0800 Subject: iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed the DMA fault reason from hex to decimal. It also added "0x" prefixes to the PCI bus/device, e.g., - DMAR: [INTR-REMAP] Request device [00:00.5] + DMAR: [INTR-REMAP] Request device [0x00:0x00.5] These no longer match dev_printk() and other similar messages in dmar_match_pci_path() and dmar_acpi_insert_dev_scope(). Drop the "0x" prefixes from the bus and device addresses. Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/dmar.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c index 0ec5514c9980..b7708b93f3fa 100644 --- a/drivers/iommu/intel/dmar.c +++ b/drivers/iommu/intel/dmar.c @@ -1942,18 +1942,18 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type, reason = dmar_get_fault_reason(fault_reason, &fault_type); if (fault_type == INTR_REMAP) - pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n", source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr >> 48, fault_reason, reason); else if (pasid == INVALID_IOASID) - pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", type ? "DMA Read" : "DMA Write", source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr, fault_reason, reason); else - pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[%s PASID 0x%x] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", type ? "DMA Read" : "DMA Write", pasid, source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr, -- cgit v1.2.3 From f0b636804c7c4c564efbca5981e3c56b5c6fe0c5 Mon Sep 17 00:00:00 2001 From: Sven Peter Date: Fri, 24 Sep 2021 15:45:02 +0200 Subject: iommu/dart: Clear sid2group entry when a group is freed sid2groups keeps track of which stream id combinations belong to a iommu_group to assign those correctly to devices. When a iommu_group is freed a stale pointer will however remain in sid2groups. This prevents devices with the same stream id combination to ever be attached again (see below). Fix that by creating a shadow copy of the stream id configuration when a group is allocated for the first time and clear the sid2group entry when that group is freed. # echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove pci 0000:03:00.0: Removing from iommu group 1 # echo 1 >/sys/bus/pci/rescan [...] pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref] pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref] tg3 0000:03:00.0: Failed to add to iommu group 1: -2 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier Signed-off-by: Sven Peter Tested-by: Marc Zyngier Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel --- drivers/iommu/apple-dart.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c index bc0d9c363184..fdfa39ec2a4d 100644 --- a/drivers/iommu/apple-dart.c +++ b/drivers/iommu/apple-dart.c @@ -643,16 +643,34 @@ static int apple_dart_of_xlate(struct device *dev, struct of_phandle_args *args) return -EINVAL; } +static DEFINE_MUTEX(apple_dart_groups_lock); + +static void apple_dart_release_group(void *iommu_data) +{ + int i, sid; + struct apple_dart_stream_map *stream_map; + struct apple_dart_master_cfg *group_master_cfg = iommu_data; + + mutex_lock(&apple_dart_groups_lock); + + for_each_stream_map(i, group_master_cfg, stream_map) + for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) + stream_map->dart->sid2group[sid] = NULL; + + kfree(iommu_data); + mutex_unlock(&apple_dart_groups_lock); +} + static struct iommu_group *apple_dart_device_group(struct device *dev) { - static DEFINE_MUTEX(lock); int i, sid; struct apple_dart_master_cfg *cfg = dev_iommu_priv_get(dev); struct apple_dart_stream_map *stream_map; + struct apple_dart_master_cfg *group_master_cfg; struct iommu_group *group = NULL; struct iommu_group *res = ERR_PTR(-EINVAL); - mutex_lock(&lock); + mutex_lock(&apple_dart_groups_lock); for_each_stream_map(i, cfg, stream_map) { for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) { @@ -680,6 +698,20 @@ static struct iommu_group *apple_dart_device_group(struct device *dev) #endif group = generic_device_group(dev); + res = ERR_PTR(-ENOMEM); + if (!group) + goto out; + + group_master_cfg = kzalloc(sizeof(*group_master_cfg), GFP_KERNEL); + if (!group_master_cfg) { + iommu_group_put(group); + goto out; + } + + memcpy(group_master_cfg, cfg, sizeof(*group_master_cfg)); + iommu_group_set_iommudata(group, group_master_cfg, + apple_dart_release_group); + for_each_stream_map(i, cfg, stream_map) for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) stream_map->dart->sid2group[sid] = group; @@ -687,7 +719,7 @@ static struct iommu_group *apple_dart_device_group(struct device *dev) res = group; out: - mutex_unlock(&lock); + mutex_unlock(&apple_dart_groups_lock); return res; } -- cgit v1.2.3 From ced185824c89b60e65b5a2606954c098320cdfb8 Mon Sep 17 00:00:00 2001 From: Johan Almbladh Date: Mon, 27 Sep 2021 13:11:57 +0000 Subject: bpf, x86: Fix bpf mapping of atomic fetch implementation Fix the case where the dst register maps to %rax as otherwise this produces an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add bitwise atomic instructions") as %rax is clobbered given it's part of the cmpxchg as operand. The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/ xor with r0 as src") just that the case of dst register was missed. Before, dst=r0 (%rax) src=r2 (%rsi): [...] c5: mov %rax,%r10 c8: mov 0x0(%rax),%rax <---+ (broken) cc: mov %rax,%r11 | cf: and %rsi,%r11 | d2: lock cmpxchg %r11,0x0(%rax) <---+ d8: jne 0x00000000000000c8 | da: mov %rax,%rsi | dd: mov %r10,%rax | [...] | | After, dst=r0 (%rax) src=r2 (%rsi): | | [...] | da: mov %rax,%r10 | dd: mov 0x0(%r10),%rax <---+ (fixed) e1: mov %rax,%r11 | e4: and %rsi,%r11 | e7: lock cmpxchg %r11,0x0(%r10) <---+ ed: jne 0x00000000000000dd ef: mov %rax,%rsi f2: mov %r10,%rax [...] The remaining combinations were fine as-is though: After, dst=r9 (%r15) src=r0 (%rax): [...] dc: mov %rax,%r10 df: mov 0x0(%r15),%rax e3: mov %rax,%r11 e6: and %r10,%r11 e9: lock cmpxchg %r11,0x0(%r15) ef: jne 0x00000000000000df _ f1: mov %rax,%r10 | (unneeded, but f4: mov %r10,%rax _| not a problem) [...] After, dst=r9 (%r15) src=r4 (%rcx): [...] de: mov %rax,%r10 e1: mov 0x0(%r15),%rax e5: mov %rax,%r11 e8: and %rcx,%r11 eb: lock cmpxchg %r11,0x0(%r15) f1: jne 0x00000000000000e1 f3: mov %rax,%rcx f6: mov %r10,%rax [...] The case of dst == src register is rejected by the verifier and therefore not supported, but x86 JIT also handles this case just fine. After, dst=r0 (%rax) src=r0 (%rax): [...] eb: mov %rax,%r10 ee: mov 0x0(%r10),%rax f2: mov %rax,%r11 f5: and %r10,%r11 f8: lock cmpxchg %r11,0x0(%r10) fe: jne 0x00000000000000ee 100: mov %rax,%r10 103: mov %r10,%rax [...] Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions") Reported-by: Johan Almbladh Signed-off-by: Johan Almbladh Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Brendan Jackman Acked-by: Alexei Starovoitov --- arch/x86/net/bpf_jit_comp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index d24a512fd6f3..9ea57389c554 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1341,9 +1341,10 @@ st: if (is_imm8(insn->off)) if (insn->imm == (BPF_AND | BPF_FETCH) || insn->imm == (BPF_OR | BPF_FETCH) || insn->imm == (BPF_XOR | BPF_FETCH)) { - u8 *branch_target; bool is64 = BPF_SIZE(insn->code) == BPF_DW; u32 real_src_reg = src_reg; + u32 real_dst_reg = dst_reg; + u8 *branch_target; /* * Can't be implemented with a single x86 insn. @@ -1354,11 +1355,13 @@ st: if (is_imm8(insn->off)) emit_mov_reg(&prog, true, BPF_REG_AX, BPF_REG_0); if (src_reg == BPF_REG_0) real_src_reg = BPF_REG_AX; + if (dst_reg == BPF_REG_0) + real_dst_reg = BPF_REG_AX; branch_target = prog; /* Load old value */ emit_ldx(&prog, BPF_SIZE(insn->code), - BPF_REG_0, dst_reg, insn->off); + BPF_REG_0, real_dst_reg, insn->off); /* * Perform the (commutative) operation locally, * put the result in the AUX_REG. @@ -1369,7 +1372,8 @@ st: if (is_imm8(insn->off)) add_2reg(0xC0, AUX_REG, real_src_reg)); /* Attempt to swap in new value */ err = emit_atomic(&prog, BPF_CMPXCHG, - dst_reg, AUX_REG, insn->off, + real_dst_reg, AUX_REG, + insn->off, BPF_SIZE(insn->code)); if (WARN_ON(err)) return err; @@ -1383,11 +1387,10 @@ st: if (is_imm8(insn->off)) /* Restore R0 after clobbering RAX */ emit_mov_reg(&prog, true, BPF_REG_0, BPF_REG_AX); break; - } err = emit_atomic(&prog, insn->imm, dst_reg, src_reg, - insn->off, BPF_SIZE(insn->code)); + insn->off, BPF_SIZE(insn->code)); if (err) return err; break; -- cgit v1.2.3 From 0d67e332e6df72f43eaa21228daa3a79e23093f3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 14:15:10 +0200 Subject: module: fix clang CFI with MODULE_UNLOAD=n When CONFIG_MODULE_UNLOAD is disabled, the module->exit member is not defined, causing a build failure: kernel/module.c:4493:8: error: no member named 'exit' in 'struct module' mod->exit = *exit; add an #ifdef block around this. Fixes: cf68fffb66d6 ("add support for Clang CFI") Acked-by: Kees Cook Reviewed-by: Sami Tolvanen Reviewed-by: Miroslav Benes Signed-off-by: Arnd Bergmann Signed-off-by: Jessica Yu --- kernel/module.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/module.c b/kernel/module.c index 40ec9a030eec..5c26a76e800b 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -4489,8 +4489,10 @@ static void cfi_init(struct module *mod) /* Fix init/exit functions to point to the CFI jump table */ if (init) mod->init = *init; +#ifdef CONFIG_MODULE_UNLOAD if (exit) mod->exit = *exit; +#endif cfi_module_add(mod, module_addr_min); #endif -- cgit v1.2.3 From 339031bafe6b281cf2dcb8364217288b9fdab555 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 23 Sep 2021 16:44:34 +0200 Subject: netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 This is a revert of 7b1957b049 ("netfilter: nf_defrag_ipv4: use net_generic infra") and a partial revert of 8b0adbe3e3 ("netfilter: nf_defrag_ipv6: use net_generic infra"). If conntrack is builtin and kernel is booted with: nf_conntrack.enable_hooks=1 .... kernel will fail to boot due to a NULL deref in nf_defrag_ipv4_enable(): Its called before the ipv4 defrag initcall is made, so net_generic() returns NULL. To resolve this, move the user refcount back to struct net so calls to those functions are possible even before their initcalls have run. Fixes: 7b1957b04956 ("netfilter: nf_defrag_ipv4: use net_generic infra") Fixes: 8b0adbe3e38d ("netfilter: nf_defrag_ipv6: use net_generic infra"). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/ipv6/nf_defrag_ipv6.h | 1 - include/net/netns/netfilter.h | 6 ++++++ net/ipv4/netfilter/nf_defrag_ipv4.c | 30 +++++++++-------------------- net/ipv6/netfilter/nf_conntrack_reasm.c | 2 +- net/ipv6/netfilter/nf_defrag_ipv6_hooks.c | 25 +++++++++--------------- 5 files changed, 25 insertions(+), 39 deletions(-) diff --git a/include/net/netfilter/ipv6/nf_defrag_ipv6.h b/include/net/netfilter/ipv6/nf_defrag_ipv6.h index 0fd8a4159662..ceadf8ba25a4 100644 --- a/include/net/netfilter/ipv6/nf_defrag_ipv6.h +++ b/include/net/netfilter/ipv6/nf_defrag_ipv6.h @@ -17,7 +17,6 @@ struct inet_frags_ctl; struct nft_ct_frag6_pernet { struct ctl_table_header *nf_frag_frags_hdr; struct fqdir *fqdir; - unsigned int users; }; #endif /* _NF_DEFRAG_IPV6_H */ diff --git a/include/net/netns/netfilter.h b/include/net/netns/netfilter.h index 986a2a9cfdfa..b593f95e9991 100644 --- a/include/net/netns/netfilter.h +++ b/include/net/netns/netfilter.h @@ -27,5 +27,11 @@ struct netns_nf { #if IS_ENABLED(CONFIG_DECNET) struct nf_hook_entries __rcu *hooks_decnet[NF_DN_NUMHOOKS]; #endif +#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV4) + unsigned int defrag_ipv4_users; +#endif +#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) + unsigned int defrag_ipv6_users; +#endif }; #endif diff --git a/net/ipv4/netfilter/nf_defrag_ipv4.c b/net/ipv4/netfilter/nf_defrag_ipv4.c index 613432a36f0a..e61ea428ea18 100644 --- a/net/ipv4/netfilter/nf_defrag_ipv4.c +++ b/net/ipv4/netfilter/nf_defrag_ipv4.c @@ -20,13 +20,8 @@ #endif #include -static unsigned int defrag4_pernet_id __read_mostly; static DEFINE_MUTEX(defrag4_mutex); -struct defrag4_pernet { - unsigned int users; -}; - static int nf_ct_ipv4_gather_frags(struct net *net, struct sk_buff *skb, u_int32_t user) { @@ -111,19 +106,15 @@ static const struct nf_hook_ops ipv4_defrag_ops[] = { static void __net_exit defrag4_net_exit(struct net *net) { - struct defrag4_pernet *nf_defrag = net_generic(net, defrag4_pernet_id); - - if (nf_defrag->users) { + if (net->nf.defrag_ipv4_users) { nf_unregister_net_hooks(net, ipv4_defrag_ops, ARRAY_SIZE(ipv4_defrag_ops)); - nf_defrag->users = 0; + net->nf.defrag_ipv4_users = 0; } } static struct pernet_operations defrag4_net_ops = { .exit = defrag4_net_exit, - .id = &defrag4_pernet_id, - .size = sizeof(struct defrag4_pernet), }; static int __init nf_defrag_init(void) @@ -138,24 +129,23 @@ static void __exit nf_defrag_fini(void) int nf_defrag_ipv4_enable(struct net *net) { - struct defrag4_pernet *nf_defrag = net_generic(net, defrag4_pernet_id); int err = 0; mutex_lock(&defrag4_mutex); - if (nf_defrag->users == UINT_MAX) { + if (net->nf.defrag_ipv4_users == UINT_MAX) { err = -EOVERFLOW; goto out_unlock; } - if (nf_defrag->users) { - nf_defrag->users++; + if (net->nf.defrag_ipv4_users) { + net->nf.defrag_ipv4_users++; goto out_unlock; } err = nf_register_net_hooks(net, ipv4_defrag_ops, ARRAY_SIZE(ipv4_defrag_ops)); if (err == 0) - nf_defrag->users = 1; + net->nf.defrag_ipv4_users = 1; out_unlock: mutex_unlock(&defrag4_mutex); @@ -165,12 +155,10 @@ EXPORT_SYMBOL_GPL(nf_defrag_ipv4_enable); void nf_defrag_ipv4_disable(struct net *net) { - struct defrag4_pernet *nf_defrag = net_generic(net, defrag4_pernet_id); - mutex_lock(&defrag4_mutex); - if (nf_defrag->users) { - nf_defrag->users--; - if (nf_defrag->users == 0) + if (net->nf.defrag_ipv4_users) { + net->nf.defrag_ipv4_users--; + if (net->nf.defrag_ipv4_users == 0) nf_unregister_net_hooks(net, ipv4_defrag_ops, ARRAY_SIZE(ipv4_defrag_ops)); } diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index a0108415275f..5c47be29b9ee 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -33,7 +33,7 @@ static const char nf_frags_cache_name[] = "nf-frags"; -unsigned int nf_frag_pernet_id __read_mostly; +static unsigned int nf_frag_pernet_id __read_mostly; static struct inet_frags nf_frags; static struct nft_ct_frag6_pernet *nf_frag_pernet(struct net *net) diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c index e8a59d8bf2ad..cb4eb1d2c620 100644 --- a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c +++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c @@ -25,8 +25,6 @@ #include #include -extern unsigned int nf_frag_pernet_id; - static DEFINE_MUTEX(defrag6_mutex); static enum ip6_defrag_users nf_ct6_defrag_user(unsigned int hooknum, @@ -91,12 +89,10 @@ static const struct nf_hook_ops ipv6_defrag_ops[] = { static void __net_exit defrag6_net_exit(struct net *net) { - struct nft_ct_frag6_pernet *nf_frag = net_generic(net, nf_frag_pernet_id); - - if (nf_frag->users) { + if (net->nf.defrag_ipv6_users) { nf_unregister_net_hooks(net, ipv6_defrag_ops, ARRAY_SIZE(ipv6_defrag_ops)); - nf_frag->users = 0; + net->nf.defrag_ipv6_users = 0; } } @@ -134,24 +130,23 @@ static void __exit nf_defrag_fini(void) int nf_defrag_ipv6_enable(struct net *net) { - struct nft_ct_frag6_pernet *nf_frag = net_generic(net, nf_frag_pernet_id); int err = 0; mutex_lock(&defrag6_mutex); - if (nf_frag->users == UINT_MAX) { + if (net->nf.defrag_ipv6_users == UINT_MAX) { err = -EOVERFLOW; goto out_unlock; } - if (nf_frag->users) { - nf_frag->users++; + if (net->nf.defrag_ipv6_users) { + net->nf.defrag_ipv6_users++; goto out_unlock; } err = nf_register_net_hooks(net, ipv6_defrag_ops, ARRAY_SIZE(ipv6_defrag_ops)); if (err == 0) - nf_frag->users = 1; + net->nf.defrag_ipv6_users = 1; out_unlock: mutex_unlock(&defrag6_mutex); @@ -161,12 +156,10 @@ EXPORT_SYMBOL_GPL(nf_defrag_ipv6_enable); void nf_defrag_ipv6_disable(struct net *net) { - struct nft_ct_frag6_pernet *nf_frag = net_generic(net, nf_frag_pernet_id); - mutex_lock(&defrag6_mutex); - if (nf_frag->users) { - nf_frag->users--; - if (nf_frag->users == 0) + if (net->nf.defrag_ipv6_users) { + net->nf.defrag_ipv6_users--; + if (net->nf.defrag_ipv6_users == 0) nf_unregister_net_hooks(net, ipv6_defrag_ops, ARRAY_SIZE(ipv6_defrag_ops)); } -- cgit v1.2.3 From e189ae161dd784aa5d454b0832f818cacc0e131b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 21 Sep 2021 00:37:03 +0200 Subject: netfilter: nf_tables: add position handle in event notification Add position handle to allow to identify the rule location from netlink events. Otherwise, userspace cannot incrementally update a userspace cache through monitoring events. Skip handle dump if the rule has been either inserted (at the beginning of the ruleset) or appended (at the end of the ruleset), the NLM_F_APPEND netlink flag is sufficient in these two cases. Handle NLM_F_REPLACE as NLM_F_APPEND since the rule replacement expansion appends it after the specified rule handle. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index b9546defdc28..085783b14075 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2866,8 +2866,7 @@ static int nf_tables_fill_rule_info(struct sk_buff *skb, struct net *net, u32 flags, int family, const struct nft_table *table, const struct nft_chain *chain, - const struct nft_rule *rule, - const struct nft_rule *prule) + const struct nft_rule *rule, u64 handle) { struct nlmsghdr *nlh; const struct nft_expr *expr, *next; @@ -2887,9 +2886,8 @@ static int nf_tables_fill_rule_info(struct sk_buff *skb, struct net *net, NFTA_RULE_PAD)) goto nla_put_failure; - if (event != NFT_MSG_DELRULE && prule) { - if (nla_put_be64(skb, NFTA_RULE_POSITION, - cpu_to_be64(prule->handle), + if (event != NFT_MSG_DELRULE && handle) { + if (nla_put_be64(skb, NFTA_RULE_POSITION, cpu_to_be64(handle), NFTA_RULE_PAD)) goto nla_put_failure; } @@ -2925,7 +2923,10 @@ static void nf_tables_rule_notify(const struct nft_ctx *ctx, const struct nft_rule *rule, int event) { struct nftables_pernet *nft_net = nft_pernet(ctx->net); + const struct nft_rule *prule; struct sk_buff *skb; + u64 handle = 0; + u16 flags = 0; int err; if (!ctx->report && @@ -2936,9 +2937,18 @@ static void nf_tables_rule_notify(const struct nft_ctx *ctx, if (skb == NULL) goto err; + if (event == NFT_MSG_NEWRULE && + !list_is_first(&rule->list, &ctx->chain->rules) && + !list_is_last(&rule->list, &ctx->chain->rules)) { + prule = list_prev_entry(rule, list); + handle = prule->handle; + } + if (ctx->flags & (NLM_F_APPEND | NLM_F_REPLACE)) + flags |= NLM_F_APPEND; + err = nf_tables_fill_rule_info(skb, ctx->net, ctx->portid, ctx->seq, - event, 0, ctx->family, ctx->table, - ctx->chain, rule, NULL); + event, flags, ctx->family, ctx->table, + ctx->chain, rule, handle); if (err < 0) { kfree_skb(skb); goto err; @@ -2964,6 +2974,7 @@ static int __nf_tables_dump_rules(struct sk_buff *skb, struct net *net = sock_net(skb->sk); const struct nft_rule *rule, *prule; unsigned int s_idx = cb->args[0]; + u64 handle; prule = NULL; list_for_each_entry_rcu(rule, &chain->rules, list) { @@ -2975,12 +2986,17 @@ static int __nf_tables_dump_rules(struct sk_buff *skb, memset(&cb->args[1], 0, sizeof(cb->args) - sizeof(cb->args[0])); } + if (prule) + handle = prule->handle; + else + handle = 0; + if (nf_tables_fill_rule_info(skb, net, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NFT_MSG_NEWRULE, NLM_F_MULTI | NLM_F_APPEND, table->family, - table, chain, rule, prule) < 0) + table, chain, rule, handle) < 0) return 1; nl_dump_check_consistent(cb, nlmsg_hdr(skb)); @@ -3143,7 +3159,7 @@ static int nf_tables_getrule(struct sk_buff *skb, const struct nfnl_info *info, err = nf_tables_fill_rule_info(skb2, net, NETLINK_CB(skb).portid, info->nlh->nlmsg_seq, NFT_MSG_NEWRULE, 0, - family, table, chain, rule, NULL); + family, table, chain, rule, 0); if (err < 0) goto err_fill_rule_info; -- cgit v1.2.3 From 2c964c558641a3bddaee5719c9e6d8805f777812 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 25 Sep 2021 00:27:38 +0200 Subject: netfilter: nf_tables: reverse order in rule replacement expansion Deactivate old rule first, then append the new rule, so rule replacement notification via netlink first reports the deletion of the old rule with handle X in first place, then it adds the new rule (reusing the handle X of the replaced old rule). Note that the abort path releases the transaction that has been created by nft_delrule() on error. Fixes: ca08987885a1 ("netfilter: nf_tables: deactivate expressions in rule replecement routine") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 085783b14075..c8acd26c7201 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3419,17 +3419,15 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info, } if (info->nlh->nlmsg_flags & NLM_F_REPLACE) { + err = nft_delrule(&ctx, old_rule); + if (err < 0) + goto err_destroy_flow_rule; + trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule); if (trans == NULL) { err = -ENOMEM; goto err_destroy_flow_rule; } - err = nft_delrule(&ctx, old_rule); - if (err < 0) { - nft_trans_destroy(trans); - goto err_destroy_flow_rule; - } - list_add_tail_rcu(&rule->list, &old_rule->list); } else { trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule); -- cgit v1.2.3 From 51bb08dd04a05035a64504faa47651d36b0f3125 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:13:02 +0200 Subject: net: ks8851: fix link error An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/ Reviewed-by: Andrew Lunn Acked-by: Marek Vasut Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/Makefile | 6 ++---- drivers/net/ethernet/micrel/ks8851_common.c | 8 ++++++++ 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile index 5cc00d22c708..6ecc4eb30e74 100644 --- a/drivers/net/ethernet/micrel/Makefile +++ b/drivers/net/ethernet/micrel/Makefile @@ -4,8 +4,6 @@ # obj-$(CONFIG_KS8842) += ks8842.o -obj-$(CONFIG_KS8851) += ks8851.o -ks8851-objs = ks8851_common.o ks8851_spi.o -obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o -ks8851_mll-objs = ks8851_common.o ks8851_par.o +obj-$(CONFIG_KS8851) += ks8851_common.o ks8851_spi.o +obj-$(CONFIG_KS8851_MLL) += ks8851_common.o ks8851_par.o obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index 3f69bb59ba49..a6db1a8156e1 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -1057,6 +1057,7 @@ int ks8851_suspend(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_suspend); int ks8851_resume(struct device *dev) { @@ -1070,6 +1071,7 @@ int ks8851_resume(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_resume); #endif static int ks8851_register_mdiobus(struct ks8851_net *ks, struct device *dev) @@ -1243,6 +1245,7 @@ err_reg: err_reg_io: return ret; } +EXPORT_SYMBOL_GPL(ks8851_probe_common); int ks8851_remove_common(struct device *dev) { @@ -1261,3 +1264,8 @@ int ks8851_remove_common(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_remove_common); + +MODULE_DESCRIPTION("KS8851 Network driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 05e97b3d33cb25b9d9580b33ea0dd69aa922c529 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:15:24 +0200 Subject: dmascc: add CONFIG_VIRT_TO_BUS dependency Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/hamradio/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index f4843f9672c1..441da03c23ee 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -48,6 +48,7 @@ config BPQETHER config DMASCC tristate "High-speed (DMA) SCC driver for AX.25" depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API + depends on VIRT_TO_BUS help This is a driver for high-speed SCC boards, i.e. those supporting DMA on one port. You usually use those boards to connect your -- cgit v1.2.3 From c23bb54f28d61a48008428e8cd320c947993919b Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 27 Sep 2021 14:07:18 -0700 Subject: ionic: fix gathering of debug stats Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_stats.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_stats.c b/drivers/net/ethernet/pensando/ionic/ionic_stats.c index 58a854666c62..c14de5fcedea 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_stats.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_stats.c @@ -380,15 +380,6 @@ static void ionic_sw_stats_get_txq_values(struct ionic_lif *lif, u64 **buf, &ionic_dbg_intr_stats_desc[i]); (*buf)++; } - for (i = 0; i < IONIC_NUM_DBG_NAPI_STATS; i++) { - **buf = IONIC_READ_STAT64(&txqcq->napi_stats, - &ionic_dbg_napi_stats_desc[i]); - (*buf)++; - } - for (i = 0; i < IONIC_MAX_NUM_NAPI_CNTR; i++) { - **buf = txqcq->napi_stats.work_done_cntr[i]; - (*buf)++; - } for (i = 0; i < IONIC_MAX_NUM_SG_CNTR; i++) { **buf = txstats->sg_cntr[i]; (*buf)++; -- cgit v1.2.3 From 103bde372f084206c6972be543ecc247ebbff9f3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 27 Sep 2021 14:48:23 -0700 Subject: net: sun: SUNVNET_COMMON should depend on INET When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Aaron Young Cc: Rashmi Narasimhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig index 309de38a7530..b0d3f9a2950c 100644 --- a/drivers/net/ethernet/sun/Kconfig +++ b/drivers/net/ethernet/sun/Kconfig @@ -73,6 +73,7 @@ config CASSINI config SUNVNET_COMMON tristate "Common routines to support Sun Virtual Networking" depends on SUN_LDOMS + depends on INET default m config SUNVNET -- cgit v1.2.3 From a9f5970767d11eadc805d5283f202612c7ba1f59 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 27 Sep 2021 17:29:24 -0700 Subject: net: udp: annotate data race around udp_sk(sk)->corkflag up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/udp.c | 10 +++++----- net/ipv6/udp.c | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 8851c9463b4b..2a7825a5b842 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1053,7 +1053,7 @@ int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) __be16 dport; u8 tos; int err, is_udplite = IS_UDPLITE(sk); - int corkreq = up->corkflag || msg->msg_flags&MSG_MORE; + int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE; int (*getfrag)(void *, char *, int, int, int, struct sk_buff *); struct sk_buff *skb; struct ip_options_data opt_copy; @@ -1361,7 +1361,7 @@ int udp_sendpage(struct sock *sk, struct page *page, int offset, } up->len += size; - if (!(up->corkflag || (flags&MSG_MORE))) + if (!(READ_ONCE(up->corkflag) || (flags&MSG_MORE))) ret = udp_push_pending_frames(sk); if (!ret) ret = size; @@ -2662,9 +2662,9 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname, switch (optname) { case UDP_CORK: if (val != 0) { - up->corkflag = 1; + WRITE_ONCE(up->corkflag, 1); } else { - up->corkflag = 0; + WRITE_ONCE(up->corkflag, 0); lock_sock(sk); push_pending_frames(sk); release_sock(sk); @@ -2787,7 +2787,7 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname, switch (optname) { case UDP_CORK: - val = up->corkflag; + val = READ_ONCE(up->corkflag); break; case UDP_ENCAP: diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index ea53847b5b7e..e505bb007e9f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1303,7 +1303,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) int addr_len = msg->msg_namelen; bool connected = false; int ulen = len; - int corkreq = up->corkflag || msg->msg_flags&MSG_MORE; + int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE; int err; int is_udplite = IS_UDPLITE(sk); int (*getfrag)(void *, char *, int, int, int, struct sk_buff *); -- cgit v1.2.3 From f4bd73b5a950866f6c6fc98a7b684d307c5d586a Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 28 Sep 2021 09:42:27 +0900 Subject: af_unix: Return errno instead of NULL in unix_create1(). unix_create1() returns NULL on error, and the callers assume that it never fails for reasons other than out of memory. So, the callers always return -ENOMEM when unix_create1() fails. However, it also returns NULL when the number of af_unix sockets exceeds twice the limit controlled by sysctl: fs.file-max. In this case, the callers should return -ENFILE like alloc_empty_file(). This patch changes unix_create1() to return the correct error value instead of NULL on error. Out of curiosity, the assumption has been wrong since 1999 due to this change introduced in 2.2.4 [0]. diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999 +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999 @@ -388,6 +413,9 @@ { struct sock *sk; + if (atomic_read(&unix_nr_socks) >= 2*max_files) + return NULL; + MOD_INC_USE_COUNT; sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1); if (!sk) { [0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller --- net/unix/af_unix.c | 49 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 17 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 92345c9bb60c..f505b89bda6a 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -828,20 +828,25 @@ struct proto unix_stream_proto = { static struct sock *unix_create1(struct net *net, struct socket *sock, int kern, int type) { - struct sock *sk = NULL; struct unix_sock *u; + struct sock *sk; + int err; atomic_long_inc(&unix_nr_socks); - if (atomic_long_read(&unix_nr_socks) > 2 * get_max_files()) - goto out; + if (atomic_long_read(&unix_nr_socks) > 2 * get_max_files()) { + err = -ENFILE; + goto err; + } if (type == SOCK_STREAM) sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_stream_proto, kern); else /*dgram and seqpacket */ sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_dgram_proto, kern); - if (!sk) - goto out; + if (!sk) { + err = -ENOMEM; + goto err; + } sock_init_data(sock, sk); @@ -861,20 +866,23 @@ static struct sock *unix_create1(struct net *net, struct socket *sock, int kern, init_waitqueue_func_entry(&u->peer_wake, unix_dgram_peer_wake_relay); memset(&u->scm_stat, 0, sizeof(struct scm_stat)); unix_insert_socket(unix_sockets_unbound(sk), sk); -out: - if (sk == NULL) - atomic_long_dec(&unix_nr_socks); - else { - local_bh_disable(); - sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); - local_bh_enable(); - } + + local_bh_disable(); + sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); + local_bh_enable(); + return sk; + +err: + atomic_long_dec(&unix_nr_socks); + return ERR_PTR(err); } static int unix_create(struct net *net, struct socket *sock, int protocol, int kern) { + struct sock *sk; + if (protocol && protocol != PF_UNIX) return -EPROTONOSUPPORT; @@ -901,7 +909,11 @@ static int unix_create(struct net *net, struct socket *sock, int protocol, return -ESOCKTNOSUPPORT; } - return unix_create1(net, sock, kern, sock->type) ? 0 : -ENOMEM; + sk = unix_create1(net, sock, kern, sock->type); + if (IS_ERR(sk)) + return PTR_ERR(sk); + + return 0; } static int unix_release(struct socket *sock) @@ -1314,12 +1326,15 @@ static int unix_stream_connect(struct socket *sock, struct sockaddr *uaddr, we will have to recheck all again in any case. */ - err = -ENOMEM; - /* create new sock for complete connection */ newsk = unix_create1(sock_net(sk), NULL, 0, sock->type); - if (newsk == NULL) + if (IS_ERR(newsk)) { + err = PTR_ERR(newsk); + newsk = NULL; goto out; + } + + err = -ENOMEM; /* Allocate skb for sending to listening sock */ skb = sock_wmalloc(newsk, 1, 0, GFP_KERNEL); -- cgit v1.2.3 From c6995117b60ef3f7afca8fb41f906e9f459d869a Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 28 Sep 2021 09:17:20 +0200 Subject: net: mdio: mscc-miim: Fix the mdio controller According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur Reviewed-by: Cai Huoqing Signed-off-by: David S. Miller --- drivers/net/mdio/mdio-mscc-miim.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c index 1ee592d3eae4..17f98f609ec8 100644 --- a/drivers/net/mdio/mdio-mscc-miim.c +++ b/drivers/net/mdio/mdio-mscc-miim.c @@ -134,8 +134,9 @@ static int mscc_miim_reset(struct mii_bus *bus) static int mscc_miim_probe(struct platform_device *pdev) { - struct mii_bus *bus; struct mscc_miim_dev *dev; + struct resource *res; + struct mii_bus *bus; int ret; bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev)); @@ -156,10 +157,14 @@ static int mscc_miim_probe(struct platform_device *pdev) return PTR_ERR(dev->regs); } - dev->phy_regs = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(dev->phy_regs)) { - dev_err(&pdev->dev, "Unable to map internal phy registers\n"); - return PTR_ERR(dev->phy_regs); + /* This resource is optional */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) { + dev->phy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->phy_regs)) { + dev_err(&pdev->dev, "Unable to map internal phy registers\n"); + return PTR_ERR(dev->phy_regs); + } } ret = of_mdiobus_register(bus, pdev->dev.of_node); -- cgit v1.2.3 From c894b51e2a23c8c00acb3cea5045c5b70691e790 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Sep 2021 10:58:34 +0200 Subject: net: hns3: fix hclge_dbg_dump_tm_pg() stack usage This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 28 ++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index 87d96f82c318..32f62cd2dd99 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -719,9 +719,9 @@ static void hclge_dbg_fill_shaper_content(struct hclge_tm_shaper_para *para, sprintf(result[(*index)++], "%6u", para->rate); } -static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) +static int __hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *data_str, + char *buf, int len) { - char data_str[ARRAY_SIZE(tm_pg_items)][HCLGE_DBG_DATA_STR_LEN]; struct hclge_tm_shaper_para c_shaper_para, p_shaper_para; char *result[ARRAY_SIZE(tm_pg_items)], *sch_mode_str; u8 pg_id, sch_mode, weight, pri_bit_map, i, j; @@ -729,8 +729,10 @@ static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) int pos = 0; int ret; - for (i = 0; i < ARRAY_SIZE(tm_pg_items); i++) - result[i] = &data_str[i][0]; + for (i = 0; i < ARRAY_SIZE(tm_pg_items); i++) { + result[i] = data_str; + data_str += HCLGE_DBG_DATA_STR_LEN; + } hclge_dbg_fill_content(content, sizeof(content), tm_pg_items, NULL, ARRAY_SIZE(tm_pg_items)); @@ -781,6 +783,24 @@ static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) return 0; } +static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) +{ + char *data_str; + int ret; + + data_str = kcalloc(ARRAY_SIZE(tm_pg_items), + HCLGE_DBG_DATA_STR_LEN, GFP_KERNEL); + + if (!data_str) + return -ENOMEM; + + ret = __hclge_dbg_dump_tm_pg(hdev, data_str, buf, len); + + kfree(data_str); + + return ret; +} + static int hclge_dbg_dump_tm_port(struct hclge_dev *hdev, char *buf, int len) { struct hclge_tm_shaper_para shaper_para; -- cgit v1.2.3 From ebc69e897e17373fbe1daaff1debaa77583a5284 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Sep 2021 06:33:15 -0600 Subject: Revert "block, bfq: honor already-setup queue merges" This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b. We have had several folks complain that this causes hangs for them, which is especially problematic as the commit has also hit stable already. As no resolution seems to be forthcoming right now, revert the patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index dd13c2bbc29c..480e1a134859 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -2662,15 +2662,6 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq) * are likely to increase the throughput. */ bfqq->new_bfqq = new_bfqq; - /* - * The above assignment schedules the following redirections: - * each time some I/O for bfqq arrives, the process that - * generated that I/O is disassociated from bfqq and - * associated with new_bfqq. Here we increases new_bfqq->ref - * in advance, adding the number of processes that are - * expected to be associated with new_bfqq as they happen to - * issue I/O. - */ new_bfqq->ref += process_refs; return new_bfqq; } @@ -2733,10 +2724,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq, { struct bfq_queue *in_service_bfqq, *new_bfqq; - /* if a merge has already been setup, then proceed with that first */ - if (bfqq->new_bfqq) - return bfqq->new_bfqq; - /* * Check delayed stable merge for rotational or non-queueing * devs. For this branch to be executed, bfqq must not be @@ -2838,6 +2825,9 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq, if (bfq_too_late_for_merging(bfqq)) return NULL; + if (bfqq->new_bfqq) + return bfqq->new_bfqq; + if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq)) return NULL; -- cgit v1.2.3 From 603a1621caa097be23c7784e36cb8edf23cd31db Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 14:16:35 +0200 Subject: mwifiex: avoid null-pointer-subtraction warning clang complains about some NULL pointer arithmetic in this driver: drivers/net/wireless/marvell/mwifiex/sta_tx.c:65:59: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*local_tx_pd) + hroom)- ^ drivers/net/wireless/marvell/mwifiex/uap_txrx.c:478:53: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*txpd) + hroom) - NULL) & Rework that expression to do the same thing using a uintptr_t. Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210927121656.940304-1-arnd@kernel.org --- drivers/net/wireless/marvell/mwifiex/sta_tx.c | 4 ++-- drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/sta_tx.c b/drivers/net/wireless/marvell/mwifiex/sta_tx.c index 241305377e20..a9b5eb992220 100644 --- a/drivers/net/wireless/marvell/mwifiex/sta_tx.c +++ b/drivers/net/wireless/marvell/mwifiex/sta_tx.c @@ -62,8 +62,8 @@ void *mwifiex_process_sta_txpd(struct mwifiex_private *priv, pkt_type = mwifiex_is_skb_mgmt_frame(skb) ? PKT_TYPE_MGMT : 0; - pad = ((void *)skb->data - (sizeof(*local_tx_pd) + hroom)- - NULL) & (MWIFIEX_DMA_ALIGN_SZ - 1); + pad = ((uintptr_t)skb->data - (sizeof(*local_tx_pd) + hroom)) & + (MWIFIEX_DMA_ALIGN_SZ - 1); skb_push(skb, sizeof(*local_tx_pd) + pad); local_tx_pd = (struct txpd *) skb->data; diff --git a/drivers/net/wireless/marvell/mwifiex/uap_txrx.c b/drivers/net/wireless/marvell/mwifiex/uap_txrx.c index 9bbdb8dfce62..245ff644f81e 100644 --- a/drivers/net/wireless/marvell/mwifiex/uap_txrx.c +++ b/drivers/net/wireless/marvell/mwifiex/uap_txrx.c @@ -475,8 +475,8 @@ void *mwifiex_process_uap_txpd(struct mwifiex_private *priv, pkt_type = mwifiex_is_skb_mgmt_frame(skb) ? PKT_TYPE_MGMT : 0; - pad = ((void *)skb->data - (sizeof(*txpd) + hroom) - NULL) & - (MWIFIEX_DMA_ALIGN_SZ - 1); + pad = ((uintptr_t)skb->data - (sizeof(*txpd) + hroom)) & + (MWIFIEX_DMA_ALIGN_SZ - 1); skb_push(skb, sizeof(*txpd) + pad); -- cgit v1.2.3 From e02c16b9cd24925ea627f007df9ca9ee00eaaa62 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Mon, 27 Sep 2021 22:36:21 +0000 Subject: selftests: KVM: Don't clobber XMM register when read There is no need to clobber a register that is only being read from. Oops. Drop the XMM register from the clobbers list. Signed-off-by: Oliver Upton Message-Id: <20210927223621.50178-1-oupton@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/include/x86_64/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index eba8bd08293e..05e65ca1c30c 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -315,7 +315,7 @@ static inline void set_xmm(int n, unsigned long val) #define GET_XMM(__xmm) \ ({ \ unsigned long __val; \ - asm volatile("movq %%"#__xmm", %0" : "=r"(__val) : : #__xmm); \ + asm volatile("movq %%"#__xmm", %0" : "=r"(__val)); \ __val; \ }) -- cgit v1.2.3 From 25b5476a294cd5f7c7730f334f6b400d30bb783d Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Fri, 10 Sep 2021 08:04:20 +0000 Subject: KVM: s390: Function documentation fixes The latest compile changes pointed us to a few instances where we use the kernel documentation style but don't explain all variables or don't adhere to it 100%. It's easy to fix so let's do that. Signed-off-by: Janosch Frank Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gaccess.c | 12 ++++++++++++ arch/s390/kvm/intercept.c | 4 +++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c index b9f85b2dc053..6af59c59cc1b 100644 --- a/arch/s390/kvm/gaccess.c +++ b/arch/s390/kvm/gaccess.c @@ -894,6 +894,11 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, /** * guest_translate_address - translate guest logical into guest absolute address + * @vcpu: virtual cpu + * @gva: Guest virtual address + * @ar: Access register + * @gpa: Guest physical address + * @mode: Translation access mode * * Parameter semantics are the same as the ones from guest_translate. * The memory contents at the guest address are not changed. @@ -934,6 +939,11 @@ int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar, /** * check_gva_range - test a range of guest virtual addresses for accessibility + * @vcpu: virtual cpu + * @gva: Guest virtual address + * @ar: Access register + * @length: Length of test range + * @mode: Translation access mode */ int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar, unsigned long length, enum gacc_mode mode) @@ -956,6 +966,7 @@ int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar, /** * kvm_s390_check_low_addr_prot_real - check for low-address protection + * @vcpu: virtual cpu * @gra: Guest real address * * Checks whether an address is subject to low-address protection and set @@ -979,6 +990,7 @@ int kvm_s390_check_low_addr_prot_real(struct kvm_vcpu *vcpu, unsigned long gra) * @pgt: pointer to the beginning of the page table for the given address if * successful (return value 0), or to the first invalid DAT entry in * case of exceptions (return value > 0) + * @dat_protection: referenced memory is write protected * @fake: pgt references contiguous guest memory block, not a pgtable */ static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr, diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index 72b25b7cc6ae..2bd8f854f1b4 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -269,6 +269,7 @@ static int handle_prog(struct kvm_vcpu *vcpu) /** * handle_external_interrupt - used for external interruption interceptions + * @vcpu: virtual cpu * * This interception only occurs if the CPUSTAT_EXT_INT bit was set, or if * the new PSW does not have external interrupts disabled. In the first case, @@ -315,7 +316,8 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu) } /** - * Handle MOVE PAGE partial execution interception. + * handle_mvpg_pei - Handle MOVE PAGE partial execution interception. + * @vcpu: virtual cpu * * This interception can only happen for guests with DAT disabled and * addresses that are currently not mapped in the host. Thus we try to -- cgit v1.2.3 From df38d852c6814cbbd010d81e84efb9dc057d5ba6 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 28 Sep 2021 22:07:50 +0800 Subject: kernfs: also call kernfs_set_rev() for positive dentry A KMSAN warning is reported by Alexander Potapenko: BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 d_revalidate fs/namei.c:854 lookup_dcache fs/namei.c:1522 __lookup_hash+0x3a6/0x590 fs/namei.c:1543 filename_create+0x312/0x7c0 fs/namei.c:3657 do_mkdirat+0x103/0x930 fs/namei.c:3900 __do_sys_mkdir fs/namei.c:3931 __se_sys_mkdir fs/namei.c:3929 __x64_sys_mkdir+0xda/0x120 fs/namei.c:3929 do_syscall_x64 arch/x86/entry/common.c:51 It seems a positive dentry in kernfs becomes a negative dentry directly through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized when accessing it in kernfs_dop_revalidate(), because it is only initialized when created as negative dentry in kernfs_iop_lookup(). The problem can be reproduced by the following command: cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi A simple fixes seems to be initializing d->d_time for positive dentry in kernfs_iop_lookup() as well. The downside is the negative dentry will be revalidated again after it becomes negative in d_delete(), because the revison of its parent must have been increased due to its removal. Alternative solution is implement .d_iput for kernfs, and assign d_time for the newly-generated negative dentry in it. But we may need to take kernfs_rwsem to protect again the concurrent kernfs_link_sibling() on the parent directory, it is a little over-killing. Now the simple fix is chosen. Link: https://marc.info/?l=linux-fsdevel&m=163249838610499 Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching") Reported-by: Alexander Potapenko Signed-off-by: Hou Tao Link: https://lore.kernel.org/r/20210928140750.1274441-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman --- fs/kernfs/dir.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index ba581429bf7b..cfc3ce8b815a 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1116,8 +1116,13 @@ static struct dentry *kernfs_iop_lookup(struct inode *dir, if (!inode) inode = ERR_PTR(-ENOMEM); } - /* Needed only for negative dentry validation */ - if (!inode) + /* + * Needed for negative dentry validation. + * The negative dentry can be created in kernfs_iop_lookup() + * or transforms from positive dentry in dentry_unlink_inode() + * called from vfs_rmdir(). + */ + if (!IS_ERR(inode)) kernfs_set_rev(parent, dentry); up_read(&kernfs_rwsem); -- cgit v1.2.3 From 66805763a97f8f7bdf742fc0851d85c02ed9411f Mon Sep 17 00:00:00 2001 From: Leslie Shi Date: Thu, 23 Sep 2021 16:05:31 +0800 Subject: drm/amdgpu: fix gart.bo pin_count leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. Cc: Hawking Zhang Signed-off-by: Leslie Shi Signed-off-by: Guchun Chen Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 3 ++- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c index 41c3a0d70b7c..e47104a1f559 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c @@ -1098,6 +1098,8 @@ static int gmc_v10_0_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + gmc_v10_0_gart_disable(adev); + if (amdgpu_sriov_vf(adev)) { /* full access mode, so don't touch any GMC register */ DRM_DEBUG("For SRIOV client, shouldn't do anything.\n"); @@ -1106,7 +1108,6 @@ static int gmc_v10_0_hw_fini(void *handle) amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0); amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0); - gmc_v10_0_gart_disable(adev); return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index d90c16a6b2b8..5551359d5dfd 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -1794,6 +1794,8 @@ static int gmc_v9_0_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + gmc_v9_0_gart_disable(adev); + if (amdgpu_sriov_vf(adev)) { /* full access mode, so don't touch any GMC register */ DRM_DEBUG("For SRIOV client, shouldn't do anything.\n"); @@ -1802,7 +1804,6 @@ static int gmc_v9_0_hw_fini(void *handle) amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0); amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0); - gmc_v9_0_gart_disable(adev); return 0; } -- cgit v1.2.3 From 083fa05bbaf65a01866b5440031c822e32ad7510 Mon Sep 17 00:00:00 2001 From: Praful Swarnakar Date: Wed, 22 Sep 2021 23:01:29 +0530 Subject: drm/amd/display: Fix Display Flicker on embedded panels [Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index f6dbc5a74757..05eaec03d9f7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1826,14 +1826,13 @@ bool perform_link_training_with_retries( if (panel_mode == DP_PANEL_MODE_EDP) { struct cp_psp *cp_psp = &stream->ctx->cp_psp; - if (cp_psp && cp_psp->funcs.enable_assr) { - if (!cp_psp->funcs.enable_assr(cp_psp->handle, link)) { - /* since eDP implies ASSR on, change panel - * mode to disable ASSR - */ - panel_mode = DP_PANEL_MODE_DEFAULT; - } - } + if (cp_psp && cp_psp->funcs.enable_assr) + /* ASSR is bound to fail with unsigned PSP + * verstage used during devlopment phase. + * Report and continue with eDP panel mode to + * perform eDP link training with right settings + */ + cp_psp->funcs.enable_assr(cp_psp->handle, link); } #endif -- cgit v1.2.3 From 9f52c25f59b504a29dda42d83ac1e24d2af535d4 Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Sun, 26 Sep 2021 22:19:35 +0800 Subject: drm/amdgpu: correct initial cp_hqd_quantum for gfx9 didn't read the value of mmCP_HQD_QUANTUM from correct register offset Signed-off-by: Hawking Zhang Reviewed-by: Le Ma Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 603c259b073b..025184a556ee 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -3599,7 +3599,7 @@ static int gfx_v9_0_mqd_init(struct amdgpu_ring *ring) /* set static priority for a queue/ring */ gfx_v9_0_mqd_set_priority(ring, mqd); - mqd->cp_hqd_quantum = RREG32(mmCP_HQD_QUANTUM); + mqd->cp_hqd_quantum = RREG32_SOC15(GC, 0, mmCP_HQD_QUANTUM); /* map_queues packet doesn't need activate the queue, * so only kiq need set this field. -- cgit v1.2.3 From 467a51b69d0828887fb1b6719159a6b16da688f8 Mon Sep 17 00:00:00 2001 From: Josip Pavic Date: Fri, 17 Sep 2021 11:01:47 -0400 Subject: drm/amd/display: initialize backlight_ramping_override to false [Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li Acked-by: Anson Jacob Signed-off-by: Josip Pavic Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 66c799f5c7cf..e6a68337d42f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1719,6 +1719,7 @@ static int dm_late_init(void *handle) linear_lut[i] = 0xFFFF * i / 15; params.set = 0; + params.backlight_ramping_override = false; params.backlight_ramping_start = 0xCCCC; params.backlight_ramping_reduction = 0xCCCCCCCC; params.backlight_lut_array_size = 16; -- cgit v1.2.3 From d942856865c733ff60450de9691af796ad71d7bc Mon Sep 17 00:00:00 2001 From: Charlene Liu Date: Mon, 20 Sep 2021 14:30:02 -0400 Subject: drm/amd/display: Pass PCI deviceid into DC [why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu Acked-by: Anson Jacob Signed-off-by: Charlene Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e6a68337d42f..1ea31dcc7a8b 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1115,6 +1115,7 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) init_data.asic_id.pci_revision_id = adev->pdev->revision; init_data.asic_id.hw_internal_rev = adev->external_rev_id; + init_data.asic_id.chip_id = adev->pdev->device; init_data.asic_id.vram_width = adev->gmc.vram_width; /* TODO: initialize init_data.asic_id.vram_type here!!!! */ -- cgit v1.2.3 From 98122e63a7ecc08c4172a17d97a06ef5536eb268 Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Mon, 27 Sep 2021 15:08:44 +0000 Subject: drm/amdgpu: check tiling flags when creating FB on GFX8- MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On GFX9+, format modifiers are always enabled and ensure the frame-buffers can be scanned out at ADDFB2 time. On GFX8-, format modifiers are not supported and no other check is performed. This means ADDFB2 IOCTLs will succeed even if the tiling isn't supported for scan-out, and will result in garbage displayed on screen [1]. Fix this by adding a check for tiling flags for GFX8 and older. The check is taken from radeonsi in Mesa (see how is_displayable is populated in gfx6_compute_surface). Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel) [1]: https://github.com/swaywm/wlroots/issues/3185 Signed-off-by: Simon Ser Acked-by: Michel Dänzer Cc: Alex Deucher Cc: Harry Wentland Cc: Nicholas Kazlauskas Cc: Bas Nieuwenhuizen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 31 +++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7a7316731911..dc50c05f23fc 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -837,6 +837,28 @@ static int convert_tiling_flags_to_modifier(struct amdgpu_framebuffer *afb) return 0; } +/* Mirrors the is_displayable check in radeonsi's gfx6_compute_surface */ +static int check_tiling_flags_gfx6(struct amdgpu_framebuffer *afb) +{ + u64 micro_tile_mode; + + /* Zero swizzle mode means linear */ + if (AMDGPU_TILING_GET(afb->tiling_flags, SWIZZLE_MODE) == 0) + return 0; + + micro_tile_mode = AMDGPU_TILING_GET(afb->tiling_flags, MICRO_TILE_MODE); + switch (micro_tile_mode) { + case 0: /* DISPLAY */ + case 3: /* RENDER */ + return 0; + default: + drm_dbg_kms(afb->base.dev, + "Micro tile mode %llu not supported for scanout\n", + micro_tile_mode); + return -EINVAL; + } +} + static void get_block_dimensions(unsigned int block_log2, unsigned int cpp, unsigned int *width, unsigned int *height) { @@ -1103,6 +1125,7 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj) { + struct amdgpu_device *adev = drm_to_adev(dev); int ret, i; /* @@ -1122,6 +1145,14 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev, if (ret) return ret; + if (!dev->mode_config.allow_fb_modifiers) { + drm_WARN_ONCE(dev, adev->family >= AMDGPU_FAMILY_AI, + "GFX9+ requires FB check based on format modifier\n"); + ret = check_tiling_flags_gfx6(rfb); + if (ret) + return ret; + } + if (dev->mode_config.allow_fb_modifiers && !(rfb->base.flags & DRM_MODE_FB_MODIFIERS)) { ret = convert_tiling_flags_to_modifier(rfb); -- cgit v1.2.3 From 26db706a6d77b9e184feb11725e97e53b7a89519 Mon Sep 17 00:00:00 2001 From: Prike Liang Date: Wed, 25 Aug 2021 13:36:38 +0800 Subject: drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix In the s2idle stress test sdma resume fail occasionally,in the failed case GPU is in the gfxoff state.This issue may introduce by firmware miss handle doorbell S/R and now temporary fix the issue by forcing exit gfxoff for sdma resume. Signed-off-by: Prike Liang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c index 779f5c911e11..e32efcfb0c8b 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c @@ -868,6 +868,12 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) msleep(1000); } + /* TODO: check whether can submit a doorbell request to raise + * a doorbell fence to exit gfxoff. + */ + if (adev->in_s0ix) + amdgpu_gfx_off_ctrl(adev, false); + sdma_v5_2_soft_reset(adev); /* unhalt the MEs */ sdma_v5_2_enable(adev, true); @@ -876,6 +882,8 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) /* start the gfx rings and rlc compute queues */ r = sdma_v5_2_gfx_resume(adev); + if (adev->in_s0ix) + amdgpu_gfx_off_ctrl(adev, true); if (r) return r; r = sdma_v5_2_rlc_resume(adev); -- cgit v1.2.3 From 571fa247ab411f3233eeaaf837c6e646a513b9f8 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Tue, 28 Sep 2021 11:16:08 +0530 Subject: samples: bpf: Fix vmlinux.h generation for XDP samples MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Generate vmlinux.h only from the in-tree vmlinux, and remove enum declarations that would cause a build failure in case of version mismatches. There are now two options when building the samples: 1. Compile the kernel to use in-tree vmlinux for vmlinux.h 2. Override VMLINUX_BTF for samples using something like this: make VMLINUX_BTF=/sys/kernel/btf/vmlinux -C samples/bpf This change was tested with relative builds, e.g. cases like: * make O=build -C samples/bpf * make KBUILD_OUTPUT=build -C samples/bpf * make -C samples/bpf * cd samples/bpf && make When a suitable VMLINUX_BTF is not found, the following message is printed: /home/kkd/src/linux/samples/bpf/Makefile:333: *** Cannot find a vmlinux for VMLINUX_BTF at any of " ./vmlinux", build the kernel or set VMLINUX_BTF variable. Stop. Fixes: 384b6b3bbf0d (samples: bpf: Add vmlinux.h generation support) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Andrii Nakryiko Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/bpf/20210928054608.1799021-1-memxor@gmail.com --- samples/bpf/Makefile | 17 ++++++++--------- samples/bpf/xdp_redirect_map_multi.bpf.c | 5 ----- 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index 4dc20be5fb96..5fd48a8d4f10 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -322,17 +322,11 @@ $(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h -include $(BPF_SAMPLES_PATH)/Makefile.target -VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ - $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ - ../../../../vmlinux \ - /sys/kernel/btf/vmlinux \ - /boot/vmlinux-$(shell uname -r) +VMLINUX_BTF_PATHS ?= $(abspath $(if $(O),$(O)/vmlinux)) \ + $(abspath $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux)) \ + $(abspath ./vmlinux) VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS)))) -ifeq ($(VMLINUX_BTF),) -$(error Cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)") -endif - $(obj)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) ifeq ($(VMLINUX_H),) $(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@ @@ -340,6 +334,11 @@ else $(Q)cp "$(VMLINUX_H)" $@ endif +ifeq ($(VMLINUX_BTF),) + $(error Cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)",\ + build the kernel or set VMLINUX_BTF variable) +endif + clean-files += vmlinux.h # Get Clang's default includes on this system, as opposed to those seen by diff --git a/samples/bpf/xdp_redirect_map_multi.bpf.c b/samples/bpf/xdp_redirect_map_multi.bpf.c index 8f59d430cb64..bb0a5a3bfcf0 100644 --- a/samples/bpf/xdp_redirect_map_multi.bpf.c +++ b/samples/bpf/xdp_redirect_map_multi.bpf.c @@ -5,11 +5,6 @@ #include "xdp_sample.bpf.h" #include "xdp_sample_shared.h" -enum { - BPF_F_BROADCAST = (1ULL << 3), - BPF_F_EXCLUDE_INGRESS = (1ULL << 4), -}; - struct { __uint(type, BPF_MAP_TYPE_DEVMAP_HASH); __uint(key_size, sizeof(int)); -- cgit v1.2.3 From 9e28cfead2f8f5aba7df03c74c9ec645b5ffc5fd Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Tue, 28 Sep 2021 21:48:49 +0800 Subject: net: mdio-ipq4019: Fix the error for an optional regs resource The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski --- drivers/net/mdio/mdio-ipq4019.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c index 0d7d3e15d2f0..5f4cd24a0241 100644 --- a/drivers/net/mdio/mdio-ipq4019.c +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -207,6 +207,7 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) { struct ipq4019_mdio_data *priv; struct mii_bus *bus; + struct resource *res; int ret; bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); @@ -224,7 +225,10 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) return PTR_ERR(priv->mdio_clk); /* The platform resource is provided on the chipset IPQ5018 */ - priv->eth_ldo_rdy = devm_platform_ioremap_resource(pdev, 1); + /* This resource is optional */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) + priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res); bus->name = "ipq4019_mdio"; bus->read = ipq4019_mdio_read; -- cgit v1.2.3 From f936bb42aeb94a069bec7c9e04100d199c372956 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 28 Sep 2021 16:10:49 +0200 Subject: net: bridge: mcast: Associate the seqcount with its protecting lock. The sequence count bridge_mcast_querier::seq is protected by net_bridge::multicast_lock but seqcount_init() does not associate the seqcount with the lock. This leads to a warning on PREEMPT_RT because preemption is still enabled. Let seqcount_init() associate the seqcount with lock that protects the write section. Remove lockdep_assert_held_once() because lockdep already checks whether the associated lock is held. Fixes: 67b746f94ff39 ("net: bridge: mcast: make sure querier port/address updates are consistent") Reported-by: Mike Galbraith Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Tested-by: Mike Galbraith Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski --- net/bridge/br_multicast.c | 6 ++---- net/bridge/br_private.h | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 3523c8c7068f..f3d751105343 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1677,8 +1677,6 @@ static void br_multicast_update_querier(struct net_bridge_mcast *brmctx, int ifindex, struct br_ip *saddr) { - lockdep_assert_held_once(&brmctx->br->multicast_lock); - write_seqcount_begin(&querier->seq); querier->port_ifidx = ifindex; memcpy(&querier->addr, saddr, sizeof(*saddr)); @@ -3867,13 +3865,13 @@ void br_multicast_ctx_init(struct net_bridge *br, brmctx->ip4_other_query.delay_time = 0; brmctx->ip4_querier.port_ifidx = 0; - seqcount_init(&brmctx->ip4_querier.seq); + seqcount_spinlock_init(&brmctx->ip4_querier.seq, &br->multicast_lock); brmctx->multicast_igmp_version = 2; #if IS_ENABLED(CONFIG_IPV6) brmctx->multicast_mld_version = 1; brmctx->ip6_other_query.delay_time = 0; brmctx->ip6_querier.port_ifidx = 0; - seqcount_init(&brmctx->ip6_querier.seq); + seqcount_spinlock_init(&brmctx->ip6_querier.seq, &br->multicast_lock); #endif timer_setup(&brmctx->ip4_mc_router_timer, diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index b4cef3a97f12..e8136db44462 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -82,7 +82,7 @@ struct bridge_mcast_other_query { struct bridge_mcast_querier { struct br_ip addr; int port_ifidx; - seqcount_t seq; + seqcount_spinlock_t seq; }; /* IGMP/MLD statistics */ -- cgit v1.2.3 From 1018bf24550fd0feec14648309a0aeb62401f4dc Mon Sep 17 00:00:00 2001 From: Enzo Matsumiya Date: Tue, 28 Sep 2021 19:56:34 -0300 Subject: ksmbd: fix documentation for 2 functions ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not task_struct/ERR_PTR. Signed-off-by: Enzo Matsumiya Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/transport_tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ksmbd/transport_tcp.c b/fs/ksmbd/transport_tcp.c index dc15a5ecd2e0..c14320e03b69 100644 --- a/fs/ksmbd/transport_tcp.c +++ b/fs/ksmbd/transport_tcp.c @@ -215,7 +215,7 @@ out_error: * ksmbd_kthread_fn() - listen to new SMB connections and callback server * @p: arguments to forker thread * - * Return: Returns a task_struct or ERR_PTR + * Return: 0 on success, error number otherwise */ static int ksmbd_kthread_fn(void *p) { @@ -387,7 +387,7 @@ static void tcp_destroy_socket(struct socket *ksmbd_socket) /** * create_socket - create socket for ksmbd/0 * - * Return: Returns a task_struct or ERR_PTR + * Return: 0 on success, error number otherwise */ static int create_socket(struct interface *iface) { -- cgit v1.2.3 From e8c2da7e329ce004fee748b921e4c765dc2fa338 Mon Sep 17 00:00:00 2001 From: Jonathan Hsu Date: Fri, 24 Sep 2021 16:58:48 +0800 Subject: scsi: ufs: Fix illegal offset in UPIU event trace Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace(). Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs") Cc: stable@vger.kernel.org Reviewed-by: Stanley Chu Reviewed-by: Bart Van Assche Signed-off-by: Jonathan Hsu Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 029c9631ec2b..188de6f91050 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -318,8 +318,7 @@ static void ufshcd_add_query_upiu_trace(struct ufs_hba *hba, static void ufshcd_add_tm_upiu_trace(struct ufs_hba *hba, unsigned int tag, enum ufs_trace_str_t str_t) { - int off = (int)tag - hba->nutrs; - struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[off]; + struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[tag]; if (!trace_ufshcd_upiu_enabled()) return; -- cgit v1.2.3 From dd689ed5aa905daf4ba4c99319a52aad6ea0a796 Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Fri, 24 Sep 2021 17:51:53 +0800 Subject: scsi: ses: Fix unsigned comparison with less than zero Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 43e682297fd5..0a1734f34587 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -118,7 +118,7 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, static int ses_send_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { - u32 result; + int result; unsigned char cmd[] = { SEND_DIAGNOSTIC, -- cgit v1.2.3 From cced4c0ec7c06f5230a2958907a409c849762293 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 25 Sep 2021 00:03:30 +0100 Subject: scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported" There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index c25ce8f0e0af..07d0250f17c3 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -300,7 +300,7 @@ static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi, } break; default: - pr_info("Unsupport virtio scsi event reason %x\n", event->reason); + pr_info("Unsupported virtio scsi event reason %x\n", event->reason); } } @@ -392,7 +392,7 @@ static void virtscsi_handle_event(struct work_struct *work) virtscsi_handle_param_change(vscsi, event); break; default: - pr_err("Unsupport virtio scsi event %x\n", event->event); + pr_err("Unsupported virtio scsi event %x\n", event->event); } virtscsi_kick_event(vscsi, event_node); } -- cgit v1.2.3 From 8e2d81c6b5be0d7629fb50b6f678fc07a4c58fae Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Fri, 24 Sep 2021 20:51:54 -0700 Subject: scsi: qla2xxx: Fix excessive messages during device logout Disable default logging of some I/O path messages. If desired, the messages can be turned back on by setting ql2xextended_error_logging. Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com Reviewed-by: Ewan D. Milne Reviewed-by: Himanshu Madhani Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_isr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index ece60267b971..b26f2699adb2 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2634,7 +2634,7 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, } if (unlikely(logit)) - ql_log(ql_log_warn, fcport->vha, 0x5060, + ql_log(ql_dbg_io, fcport->vha, 0x5060, "NVME-%s ERR Handling - hdl=%x status(%x) tr_len:%x resid=%x ox_id=%x\n", sp->name, sp->handle, comp_status, fd->transferred_length, le32_to_cpu(sts->residual_len), @@ -3491,7 +3491,7 @@ check_scsi_status: out: if (logit) - ql_log(ql_log_warn, fcport->vha, 0x3022, + ql_log(ql_dbg_io, fcport->vha, 0x3022, "FCP command status: 0x%x-0x%x (0x%x) nexus=%ld:%d:%llu portid=%02x%02x%02x oxid=0x%x cdb=%10phN len=0x%x rsp_info=0x%x resid=0x%x fw_resid=0x%x sp=%p cp=%p.\n", comp_status, scsi_status, res, vha->host_no, cp->device->id, cp->device->lun, fcport->d_id.b.domain, -- cgit v1.2.3 From 79a7482249a7353bc86aff8127954d5febf02472 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Mon, 27 Sep 2021 21:44:08 +0530 Subject: scsi: csiostor: Add module softdep on cxgb4 Both cxgb4 and csiostor drivers run on their own independent Physical Function. But when cxgb4 and csiostor are both being loaded in parallel via modprobe, there is a race when firmware upgrade is attempted by both the drivers. When the cxgb4 driver initiates the firmware upgrade, it halts the firmware and the chip until upgrade is complete. When the csiostor driver is coming up in parallel, the firmware mailbox communication fails with timeouts and the csiostor driver probe fails. Add a module soft dependency on cxgb4 driver to ensure loading csiostor triggers cxgb4 to load first when available to avoid the firmware upgrade race. Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver") Signed-off-by: Rahul Lakkireddy Signed-off-by: Martin K. Petersen --- drivers/scsi/csiostor/csio_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c index 390b07bf92b9..ccbded3353bd 100644 --- a/drivers/scsi/csiostor/csio_init.c +++ b/drivers/scsi/csiostor/csio_init.c @@ -1254,3 +1254,4 @@ MODULE_DEVICE_TABLE(pci, csio_pci_tbl); MODULE_VERSION(CSIO_DRV_VERSION); MODULE_FIRMWARE(FW_FNAME_T5); MODULE_FIRMWARE(FW_FNAME_T6); +MODULE_SOFTDEP("pre: cxgb4"); -- cgit v1.2.3 From 4ca57d5139a0be3cf76c1667a4c0afb16d4a3b02 Mon Sep 17 00:00:00 2001 From: Rajaravi Krishna Katta Date: Tue, 14 Sep 2021 18:28:48 +0300 Subject: habanalabs: fix resetting args in wait for CS IOCTL In wait for CS IOCTL code, the driver resets the incoming args structure before returning to the user, regardless of the return value of the IOCTL. In case the IOCTL returns EINTR, resetting the args will result in error in case the userspace will repeat the ioctl call immediately (which is the behavior in the hl-thunk userspace library). The solution is to reset the args only if the driver returns success (0) as a return value for the IOCTL. Signed-off-by: Rajaravi Krishna Katta Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- .../misc/habanalabs/common/command_submission.c | 33 +++++++++++++--------- include/uapi/misc/habanalabs.h | 6 ++-- 2 files changed, 21 insertions(+), 18 deletions(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 91b57544f7c6..6dafff375f1c 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -2649,11 +2649,18 @@ put_ctx: free_seq_arr: kfree(cs_seq_arr); - /* update output args */ - memset(args, 0, sizeof(*args)); if (rc) return rc; + if (mcs_data.wait_status == -ERESTARTSYS) { + dev_err_ratelimited(hdev->dev, + "user process got signal while waiting for Multi-CS\n"); + return -EINTR; + } + + /* update output args */ + memset(args, 0, sizeof(*args)); + if (mcs_data.completion_bitmap) { args->out.status = HL_WAIT_CS_STATUS_COMPLETED; args->out.cs_completion_map = mcs_data.completion_bitmap; @@ -2667,8 +2674,6 @@ free_seq_arr: /* update if some CS was gone */ if (mcs_data.timestamp) args->out.flags |= HL_WAIT_CS_STATUS_FLAG_GONE; - } else if (mcs_data.wait_status == -ERESTARTSYS) { - args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED; } else { args->out.status = HL_WAIT_CS_STATUS_BUSY; } @@ -2688,16 +2693,17 @@ static int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data) rc = _hl_cs_wait_ioctl(hdev, hpriv->ctx, args->in.timeout_us, seq, &status, ×tamp); + if (rc == -ERESTARTSYS) { + dev_err_ratelimited(hdev->dev, + "user process got signal while waiting for CS handle %llu\n", + seq); + return -EINTR; + } + memset(args, 0, sizeof(*args)); if (rc) { - if (rc == -ERESTARTSYS) { - dev_err_ratelimited(hdev->dev, - "user process got signal while waiting for CS handle %llu\n", - seq); - args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED; - rc = -EINTR; - } else if (rc == -ETIMEDOUT) { + if (rc == -ETIMEDOUT) { dev_err_ratelimited(hdev->dev, "CS %llu has timed-out while user process is waiting for it\n", seq); @@ -2823,7 +2829,6 @@ wait_again: dev_err_ratelimited(hdev->dev, "user process got signal while waiting for interrupt ID %d\n", interrupt->interrupt_id); - *status = HL_WAIT_CS_STATUS_INTERRUPTED; rc = -EINTR; } else { *status = CS_WAIT_STATUS_BUSY; @@ -2878,8 +2883,6 @@ static int hl_interrupt_wait_ioctl(struct hl_fpriv *hpriv, void *data) args->in.interrupt_timeout_us, args->in.addr, args->in.target, interrupt_offset, &status); - memset(args, 0, sizeof(*args)); - if (rc) { if (rc != -EINTR) dev_err_ratelimited(hdev->dev, @@ -2888,6 +2891,8 @@ static int hl_interrupt_wait_ioctl(struct hl_fpriv *hpriv, void *data) return rc; } + memset(args, 0, sizeof(*args)); + switch (status) { case CS_WAIT_STATUS_COMPLETED: args->out.status = HL_WAIT_CS_STATUS_COMPLETED; diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h index 7cc2a0f3f2f5..d13bb8c1b450 100644 --- a/include/uapi/misc/habanalabs.h +++ b/include/uapi/misc/habanalabs.h @@ -917,7 +917,6 @@ struct hl_wait_cs_in { #define HL_WAIT_CS_STATUS_BUSY 1 #define HL_WAIT_CS_STATUS_TIMEDOUT 2 #define HL_WAIT_CS_STATUS_ABORTED 3 -#define HL_WAIT_CS_STATUS_INTERRUPTED 4 #define HL_WAIT_CS_STATUS_FLAG_GONE 0x1 #define HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD 0x2 @@ -1286,7 +1285,8 @@ struct hl_debug_args { * EIO - The CS was aborted (usually because the device was reset) * ENODEV - The device wants to do hard-reset (so user need to close FD) * - * The driver also returns a custom define inside the IOCTL which can be: + * The driver also returns a custom define in case the IOCTL call returned 0. + * The define can be one of the following: * * HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0) * HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0) @@ -1294,8 +1294,6 @@ struct hl_debug_args { * (ETIMEDOUT) * HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the * device was reset (EIO) - * HL_WAIT_CS_STATUS_INTERRUPTED - Waiting for the CS was interrupted (EINTR) - * */ #define HL_IOCTL_WAIT_CS \ -- cgit v1.2.3 From 513e605d7a9ce136886cb42ebb2c40e9a6eb6333 Mon Sep 17 00:00:00 2001 From: Feng Zhou Date: Tue, 28 Sep 2021 15:23:59 -0700 Subject: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Feng Zhou Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 ++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index fc26e4ddeb0d..beda8e0ef7d4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -3208,7 +3208,7 @@ static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter) max_combined = ixgbe_max_rss_indices(adapter); } - return max_combined; + return min_t(int, max_combined, num_online_cpus()); } static void ixgbe_get_channels(struct net_device *dev, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 24e06ba6f5e9..13c4782b920a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -10112,6 +10112,7 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog) struct ixgbe_adapter *adapter = netdev_priv(dev); struct bpf_prog *old_prog; bool need_reset; + int num_queues; if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) return -EINVAL; @@ -10161,11 +10162,14 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog) /* Kick start the NAPI context if there is an AF_XDP socket open * on that queue id. This so that receiving will start. */ - if (need_reset && prog) - for (i = 0; i < adapter->num_rx_queues; i++) + if (need_reset && prog) { + num_queues = min_t(int, adapter->num_rx_queues, + adapter->num_xdp_queues); + for (i = 0; i < num_queues; i++) if (adapter->xdp_ring[i]->xsk_pool) (void)ixgbe_xsk_wakeup(adapter->netdev, i, XDP_WAKEUP_RX); + } return 0; } -- cgit v1.2.3 From 5b09e88e1bf7fe86540fab4b5f3eece8abead39e Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:49 +0800 Subject: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index adc54a726661..5637c075a894 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -779,6 +779,11 @@ static int hns3_nic_net_open(struct net_device *netdev) if (hns3_nic_resetting(netdev)) return -EBUSY; + if (!test_bit(HNS3_NIC_STATE_DOWN, &priv->state)) { + netdev_warn(netdev, "net open repeatedly!\n"); + return 0; + } + netif_carrier_off(netdev); ret = hns3_nic_set_real_num_queue(netdev); -- cgit v1.2.3 From a8e76fefe3de9b8e609cf192af75e7878d21fa3a Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:50 +0800 Subject: net: hns3: remove tc enable checking Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 - drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 11 ++--------- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 5 ----- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 -- 4 files changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index 546a60530384..8ba21d6dc220 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -752,7 +752,6 @@ struct hnae3_tc_info { u8 prio_tc[HNAE3_MAX_USER_PRIO]; /* TC indexed by prio */ u16 tqp_count[HNAE3_MAX_TC]; u16 tqp_offset[HNAE3_MAX_TC]; - unsigned long tc_en; /* bitmap of TC enabled */ u8 num_tc; /* Total number of enabled TCs */ bool mqprio_active; }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 5637c075a894..468b8f07bf47 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -623,13 +623,9 @@ static int hns3_nic_set_real_num_queue(struct net_device *netdev) return ret; } - for (i = 0; i < HNAE3_MAX_TC; i++) { - if (!test_bit(i, &tc_info->tc_en)) - continue; - + for (i = 0; i < tc_info->num_tc; i++) netdev_set_tc_queue(netdev, i, tc_info->tqp_count[i], tc_info->tqp_offset[i]); - } } ret = netif_set_real_num_tx_queues(netdev, queue_size); @@ -4870,12 +4866,9 @@ static void hns3_init_tx_ring_tc(struct hns3_nic_priv *priv) struct hnae3_tc_info *tc_info = &kinfo->tc_info; int i; - for (i = 0; i < HNAE3_MAX_TC; i++) { + for (i = 0; i < tc_info->num_tc; i++) { int j; - if (!test_bit(i, &tc_info->tc_en)) - continue; - for (j = 0; j < tc_info->tqp_count[i]; j++) { struct hnae3_queue *q; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 4a619e5d3f35..96f96644abab 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -441,8 +441,6 @@ static int hclge_mqprio_qopt_check(struct hclge_dev *hdev, static void hclge_sync_mqprio_qopt(struct hnae3_tc_info *tc_info, struct tc_mqprio_qopt_offload *mqprio_qopt) { - int i; - memset(tc_info, 0, sizeof(*tc_info)); tc_info->num_tc = mqprio_qopt->qopt.num_tc; memcpy(tc_info->prio_tc, mqprio_qopt->qopt.prio_tc_map, @@ -451,9 +449,6 @@ static void hclge_sync_mqprio_qopt(struct hnae3_tc_info *tc_info, sizeof_field(struct hnae3_tc_info, tqp_count)); memcpy(tc_info->tqp_offset, mqprio_qopt->qopt.offset, sizeof_field(struct hnae3_tc_info, tqp_offset)); - - for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) - set_bit(tc_info->prio_tc[i], &tc_info->tc_en); } static int hclge_config_tc(struct hclge_dev *hdev, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 44618cc4cca1..6f5035a788c0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -687,12 +687,10 @@ static void hclge_tm_vport_tc_info_update(struct hclge_vport *vport) for (i = 0; i < HNAE3_MAX_TC; i++) { if (hdev->hw_tc_map & BIT(i) && i < kinfo->tc_info.num_tc) { - set_bit(i, &kinfo->tc_info.tc_en); kinfo->tc_info.tqp_offset[i] = i * kinfo->rss_size; kinfo->tc_info.tqp_count[i] = kinfo->rss_size; } else { /* Set to default queue if TC is disable */ - clear_bit(i, &kinfo->tc_info.tc_en); kinfo->tc_info.tqp_offset[i] = 0; kinfo->tc_info.tqp_count[i] = 1; } -- cgit v1.2.3 From d82650be60ee92e7486f755f5387023278aa933f Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:51 +0800 Subject: net: hns3: don't rollback when destroy mqprio fail For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 96f96644abab..351b8f179a29 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -514,12 +514,17 @@ static int hclge_setup_tc(struct hnae3_handle *h, return hclge_notify_init_up(hdev); err_out: - /* roll-back */ - memcpy(&kinfo->tc_info, &old_tc_info, sizeof(old_tc_info)); - if (hclge_config_tc(hdev, &kinfo->tc_info)) - dev_err(&hdev->pdev->dev, - "failed to roll back tc configuration\n"); - + if (!tc) { + dev_warn(&hdev->pdev->dev, + "failed to destroy mqprio, will active after reset, ret = %d\n", + ret); + } else { + /* roll-back */ + memcpy(&kinfo->tc_info, &old_tc_info, sizeof(old_tc_info)); + if (hclge_config_tc(hdev, &kinfo->tc_info)) + dev_err(&hdev->pdev->dev, + "failed to roll back tc configuration\n"); + } hclge_notify_init_up(hdev); return ret; -- cgit v1.2.3 From 0472e95ffeac8e61259eec17ab61608c6b35599d Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:52 +0800 Subject: net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 7 +++-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 31 ++++------------------ 2 files changed, 10 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 351b8f179a29..307c9e830510 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -247,6 +247,10 @@ static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets *ets) } hclge_tm_schd_info_update(hdev, num_tc); + if (num_tc > 1) + hdev->flag |= HCLGE_FLAG_DCB_ENABLE; + else + hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; ret = hclge_ieee_ets_to_tm_info(hdev, ets); if (ret) @@ -306,8 +310,7 @@ static int hclge_ieee_setpfc(struct hnae3_handle *h, struct ieee_pfc *pfc) u8 i, j, pfc_map, *prio_tc; int ret; - if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) || - hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE) + if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) return -EINVAL; if (pfc->pfc_en == hdev->tm_info.pfc_en) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 6f5035a788c0..f314dbd3ce11 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -727,14 +727,6 @@ static void hclge_tm_tc_info_init(struct hclge_dev *hdev) for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) hdev->tm_info.prio_tc[i] = (i >= hdev->tm_info.num_tc) ? 0 : i; - - /* DCB is enabled if we have more than 1 TC or pfc_en is - * non-zero. - */ - if (hdev->tm_info.num_tc > 1 || hdev->tm_info.pfc_en) - hdev->flag |= HCLGE_FLAG_DCB_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; } static void hclge_tm_pg_info_init(struct hclge_dev *hdev) @@ -765,10 +757,10 @@ static void hclge_tm_pg_info_init(struct hclge_dev *hdev) static void hclge_update_fc_mode_by_dcb_flag(struct hclge_dev *hdev) { - if (!(hdev->flag & HCLGE_FLAG_DCB_ENABLE)) { + if (hdev->tm_info.num_tc == 1 && !hdev->tm_info.pfc_en) { if (hdev->fc_mode_last_time == HCLGE_FC_PFC) dev_warn(&hdev->pdev->dev, - "DCB is disable, but last mode is FC_PFC\n"); + "Only 1 tc used, but last mode is FC_PFC\n"); hdev->tm_info.fc_mode = hdev->fc_mode_last_time; } else if (hdev->tm_info.fc_mode != HCLGE_FC_PFC) { @@ -794,7 +786,7 @@ static void hclge_update_fc_mode(struct hclge_dev *hdev) } } -static void hclge_pfc_info_init(struct hclge_dev *hdev) +void hclge_tm_pfc_info_update(struct hclge_dev *hdev) { if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3) hclge_update_fc_mode(hdev); @@ -810,7 +802,7 @@ static void hclge_tm_schd_info_init(struct hclge_dev *hdev) hclge_tm_vport_info_update(hdev); - hclge_pfc_info_init(hdev); + hclge_tm_pfc_info_update(hdev); } static int hclge_tm_pg_to_pri_map(struct hclge_dev *hdev) @@ -1556,19 +1548,6 @@ void hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc) hclge_tm_schd_info_init(hdev); } -void hclge_tm_pfc_info_update(struct hclge_dev *hdev) -{ - /* DCB is enabled if we have more than 1 TC or pfc_en is - * non-zero. - */ - if (hdev->tm_info.num_tc > 1 || hdev->tm_info.pfc_en) - hdev->flag |= HCLGE_FLAG_DCB_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; - - hclge_pfc_info_init(hdev); -} - int hclge_tm_init_hw(struct hclge_dev *hdev, bool init) { int ret; @@ -1614,7 +1593,7 @@ int hclge_tm_vport_map_update(struct hclge_dev *hdev) if (ret) return ret; - if (!(hdev->flag & HCLGE_FLAG_DCB_ENABLE)) + if (hdev->tm_info.num_tc == 1 && !hdev->tm_info.pfc_en) return 0; return hclge_tm_bp_setup(hdev); -- cgit v1.2.3 From 108b3c7810e14892c4a1819b1d268a2c785c087c Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:53 +0800 Subject: net: hns3: fix show wrong state when add existing uc mac address Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 47fea8985861..3391244d9d3d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8708,15 +8708,8 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport, } /* check if we just hit the duplicate */ - if (!ret) { - dev_warn(&hdev->pdev->dev, "VF %u mac(%pM) exists\n", - vport->vport_id, addr); - return 0; - } - - dev_err(&hdev->pdev->dev, - "PF failed to add unicast entry(%pM) in the MAC table\n", - addr); + if (!ret) + return -EEXIST; return ret; } @@ -8868,7 +8861,13 @@ static void hclge_sync_vport_mac_list(struct hclge_vport *vport, } else { set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state); - break; + + /* If one unicast mac address is existing in hardware, + * we need to try whether other unicast mac addresses + * are new addresses that can be added. + */ + if (ret != -EEXIST) + break; } } } -- cgit v1.2.3 From 276e60421668d019dc655973b1832ea354c0f36c Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:54 +0800 Subject: net: hns3: PF enable promisc for VF when mac table is overflow If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 3391244d9d3d..f5b8d1fee0f1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -12796,8 +12796,12 @@ static void hclge_sync_promisc_mode(struct hclge_dev *hdev) continue; if (vport->vf_info.trusted) { - uc_en = vport->vf_info.request_uc_en > 0; - mc_en = vport->vf_info.request_mc_en > 0; + uc_en = vport->vf_info.request_uc_en > 0 || + vport->overflow_promisc_flags & + HNAE3_OVERFLOW_UPE; + mc_en = vport->vf_info.request_mc_en > 0 || + vport->overflow_promisc_flags & + HNAE3_OVERFLOW_MPE; } bc_en = vport->vf_info.request_bc_en > 0; -- cgit v1.2.3 From 27bf4af69fcb9845fb2f0076db5d562ec072e70f Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:55 +0800 Subject: net: hns3: fix always enable rx vlan filter problem after selftest Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 7ea511d59e91..5ebd96f6833d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -334,7 +334,8 @@ static void hns3_selftest_prepare(struct net_device *ndev, #if IS_ENABLED(CONFIG_VLAN_8021Q) /* Disable the vlan filter for selftest does not support it */ - if (h->ae_algo->ops->enable_vlan_filter) + if (h->ae_algo->ops->enable_vlan_filter && + ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) h->ae_algo->ops->enable_vlan_filter(h, false); #endif @@ -359,7 +360,8 @@ static void hns3_selftest_restore(struct net_device *ndev, bool if_running) h->ae_algo->ops->halt_autoneg(h, false); #if IS_ENABLED(CONFIG_VLAN_8021Q) - if (h->ae_algo->ops->enable_vlan_filter) + if (h->ae_algo->ops->enable_vlan_filter && + ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) h->ae_algo->ops->enable_vlan_filter(h, true); #endif -- cgit v1.2.3 From 0178839ccca36dee238a57e7f4c3c252f5dbbba6 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:56 +0800 Subject: net: hns3: disable firmware compatible features when uninstall PF Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b262ae ("net: hns3: add link change event report") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c index ac9b69513332..9c2eeaa82294 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c @@ -467,7 +467,7 @@ err_csq: return ret; } -static int hclge_firmware_compat_config(struct hclge_dev *hdev) +static int hclge_firmware_compat_config(struct hclge_dev *hdev, bool en) { struct hclge_firmware_compat_cmd *req; struct hclge_desc desc; @@ -475,13 +475,16 @@ static int hclge_firmware_compat_config(struct hclge_dev *hdev) hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_IMP_COMPAT_CFG, false); - req = (struct hclge_firmware_compat_cmd *)desc.data; + if (en) { + req = (struct hclge_firmware_compat_cmd *)desc.data; - hnae3_set_bit(compat, HCLGE_LINK_EVENT_REPORT_EN_B, 1); - hnae3_set_bit(compat, HCLGE_NCSI_ERROR_REPORT_EN_B, 1); - if (hnae3_dev_phy_imp_supported(hdev)) - hnae3_set_bit(compat, HCLGE_PHY_IMP_EN_B, 1); - req->compat = cpu_to_le32(compat); + hnae3_set_bit(compat, HCLGE_LINK_EVENT_REPORT_EN_B, 1); + hnae3_set_bit(compat, HCLGE_NCSI_ERROR_REPORT_EN_B, 1); + if (hnae3_dev_phy_imp_supported(hdev)) + hnae3_set_bit(compat, HCLGE_PHY_IMP_EN_B, 1); + + req->compat = cpu_to_le32(compat); + } return hclge_cmd_send(&hdev->hw, &desc, 1); } @@ -538,7 +541,7 @@ int hclge_cmd_init(struct hclge_dev *hdev) /* ask the firmware to enable some features, driver can work without * it. */ - ret = hclge_firmware_compat_config(hdev); + ret = hclge_firmware_compat_config(hdev, true); if (ret) dev_warn(&hdev->pdev->dev, "Firmware compatible features not enabled(%d).\n", @@ -568,6 +571,8 @@ static void hclge_cmd_uninit_regs(struct hclge_hw *hw) void hclge_cmd_uninit(struct hclge_dev *hdev) { + hclge_firmware_compat_config(hdev, false); + set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state); /* wait to ensure that the firmware completes the possible left * over commands. -- cgit v1.2.3 From d88fd1b546ff19c8040cfaea76bf16aed1c5a0bb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 28 Sep 2021 13:32:33 -0700 Subject: net: phy: bcm7xxx: Fixed indirect MMD operations When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 114 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 110 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index e79297a4bae8..27b6a3f507ae 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -27,7 +27,12 @@ #define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe #define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf #define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a +#define MII_BCM7XXX_SHD_3_PCS_CTRL 0x0 +#define MII_BCM7XXX_SHD_3_PCS_STATUS 0x1 +#define MII_BCM7XXX_SHD_3_EEE_CAP 0x2 #define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3 +#define MII_BCM7XXX_SHD_3_EEE_LP 0x4 +#define MII_BCM7XXX_SHD_3_EEE_WK_ERR 0x5 #define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6 #define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400 #define MII_BCM7XXX_SHD_3_AN_STAT 0xb @@ -216,25 +221,37 @@ static int bcm7xxx_28nm_resume(struct phy_device *phydev) return genphy_config_aneg(phydev); } -static int phy_set_clr_bits(struct phy_device *dev, int location, - int set_mask, int clr_mask) +static int __phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) { int v, ret; - v = phy_read(dev, location); + v = __phy_read(dev, location); if (v < 0) return v; v &= ~clr_mask; v |= set_mask; - ret = phy_write(dev, location, v); + ret = __phy_write(dev, location, v); if (ret < 0) return ret; return v; } +static int phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) +{ + int ret; + + mutex_lock(&dev->mdio.bus->mdio_lock); + ret = __phy_set_clr_bits(dev, location, set_mask, clr_mask); + mutex_unlock(&dev->mdio.bus->mdio_lock); + + return ret; +} + static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev) { int ret; @@ -398,6 +415,93 @@ static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev) return bcm7xxx_28nm_ephy_apd_enable(phydev); } +#define MII_BCM7XXX_REG_INVALID 0xff + +static u8 bcm7xxx_28nm_ephy_regnum_to_shd(u16 regnum) +{ + switch (regnum) { + case MDIO_CTRL1: + return MII_BCM7XXX_SHD_3_PCS_CTRL; + case MDIO_STAT1: + return MII_BCM7XXX_SHD_3_PCS_STATUS; + case MDIO_PCS_EEE_ABLE: + return MII_BCM7XXX_SHD_3_EEE_CAP; + case MDIO_AN_EEE_ADV: + return MII_BCM7XXX_SHD_3_AN_EEE_ADV; + case MDIO_AN_EEE_LPABLE: + return MII_BCM7XXX_SHD_3_EEE_LP; + case MDIO_PCS_EEE_WK_ERR: + return MII_BCM7XXX_SHD_3_EEE_WK_ERR; + default: + return MII_BCM7XXX_REG_INVALID; + } +} + +static bool bcm7xxx_28nm_ephy_dev_valid(int devnum) +{ + return devnum == MDIO_MMD_AN || devnum == MDIO_MMD_PCS; +} + +static int bcm7xxx_28nm_ephy_read_mmd(struct phy_device *phydev, + int devnum, u16 regnum) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + ret = __phy_read(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT); + +reset_shadow_mode: + /* reset shadow mode 2 */ + __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + return ret; +} + +static int bcm7xxx_28nm_ephy_write_mmd(struct phy_device *phydev, + int devnum, u16 regnum, u16 val) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + /* Write the desired value in the shadow register */ + __phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, val); + +reset_shadow_mode: + /* reset shadow mode 2 */ + return __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); +} + static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev) { int ret; @@ -595,6 +699,8 @@ static void bcm7xxx_28nm_remove(struct phy_device *phydev) .get_stats = bcm7xxx_28nm_get_phy_stats, \ .probe = bcm7xxx_28nm_probe, \ .remove = bcm7xxx_28nm_remove, \ + .read_mmd = bcm7xxx_28nm_ephy_read_mmd, \ + .write_mmd = bcm7xxx_28nm_ephy_write_mmd, \ } #define BCM7XXX_40NM_EPHY(_oui, _name) \ -- cgit v1.2.3 From d75fe9cb1dd062684c9fb8a4581738170365dc06 Mon Sep 17 00:00:00 2001 From: Luca Boccassi Date: Thu, 23 Sep 2021 01:05:40 +0100 Subject: samples/bpf: Relicense bpf_insn.h as GPL-2.0-only OR BSD-2-Clause MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit libbpf and bpftool have been dual-licensed to facilitate inclusion in software that is not compatible with GPL2-only (ie: Apache2), but the samples are still GPL2-only. Given these files are samples, they get naturally copied around. For example, it is the case for samples/bpf/bpf_insn.h which was copied into the systemd tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h Some more context on systemd's needs specifically: Most of systemd is (L)GPL2-or-later, which means there is no perceived incompatibility with Apache2 software and can thus be linked with OpenSSL 3.0. But given this GPL2-only header is included this is currently not possible. Dual-licensing this header solves this problem for us as we are scoping a move to OpenSSL 3.0, see: https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same licensing used by libbpf and bpftool: 1bc38b8ff6cc ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause") 907b22365115 ("tools: bpftool: dual license all files") Signed-off-by: Luca Boccassi Signed-off-by: Daniel Borkmann Acked-by: Simon Horman Acked-by: Daniel Mack Acked-by: Josef Bacik Acked-by: Joe Stringer Acked-by: Chenbo Feng Acked-by: Björn Töpel Acked-by: Magnus Karlsson Acked-by: Brendan Jackman Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210923000540.47344-1-luca.boccassi@gmail.com --- samples/bpf/bpf_insn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/samples/bpf/bpf_insn.h b/samples/bpf/bpf_insn.h index aee04534483a..29c3bb6ad1cd 100644 --- a/samples/bpf/bpf_insn.h +++ b/samples/bpf/bpf_insn.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ /* eBPF instruction mini library */ #ifndef __BPF_INSN_H #define __BPF_INSN_H -- cgit v1.2.3 From 79e3445b38e0cab94264a3894c0c3d57c930b97e Mon Sep 17 00:00:00 2001 From: Johan Almbladh Date: Tue, 28 Sep 2021 11:13:10 +0200 Subject: bpf, arm: Fix register clobbering in div/mod implementation On ARM CPUs that lack div/mod instructions, ALU32 BPF_DIV and BPF_MOD are implemented using a call to a helper function. Before, the emitted code for those function calls failed to preserve caller-saved ARM registers. Since some of those registers happen to be mapped to BPF registers, it resulted in eBPF register values being overwritten. This patch emits code to push and pop the remaining caller-saved ARM registers r2-r3 into the stack during the div/mod function call. ARM registers r0-r1 are used as arguments and return value, and those were already saved and restored correctly. Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Johan Almbladh Signed-off-by: Daniel Borkmann --- arch/arm/net/bpf_jit_32.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a951276f0547..a903b26cde40 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -36,6 +36,10 @@ * +-----+ * |RSVD | JIT scratchpad * current ARM_SP => +-----+ <= (BPF_FP - STACK_SIZE + SCRATCH_SIZE) + * | ... | caller-saved registers + * +-----+ + * | ... | arguments passed on stack + * ARM_SP during call => +-----| * | | * | ... | Function call stack * | | @@ -63,6 +67,12 @@ * * When popping registers off the stack at the end of a BPF function, we * reference them via the current ARM_FP register. + * + * Some eBPF operations are implemented via a call to a helper function. + * Such calls are "invisible" in the eBPF code, so it is up to the calling + * program to preserve any caller-saved ARM registers during the call. The + * JIT emits code to push and pop those registers onto the stack, immediately + * above the callee stack frame. */ #define CALLEE_MASK (1 << ARM_R4 | 1 << ARM_R5 | 1 << ARM_R6 | \ 1 << ARM_R7 | 1 << ARM_R8 | 1 << ARM_R9 | \ @@ -70,6 +80,8 @@ #define CALLEE_PUSH_MASK (CALLEE_MASK | 1 << ARM_LR) #define CALLEE_POP_MASK (CALLEE_MASK | 1 << ARM_PC) +#define CALLER_MASK (1 << ARM_R0 | 1 << ARM_R1 | 1 << ARM_R2 | 1 << ARM_R3) + enum { /* Stack layout - these are offsets from (top of stack - 4) */ BPF_R2_HI, @@ -464,6 +476,7 @@ static inline int epilogue_offset(const struct jit_ctx *ctx) static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op) { + const int exclude_mask = BIT(ARM_R0) | BIT(ARM_R1); const s8 *tmp = bpf2a32[TMP_REG_1]; #if __LINUX_ARM_ARCH__ == 7 @@ -495,11 +508,17 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op) emit(ARM_MOV_R(ARM_R0, rm), ctx); } + /* Push caller-saved registers on stack */ + emit(ARM_PUSH(CALLER_MASK & ~exclude_mask), ctx); + /* Call appropriate function */ emit_mov_i(ARM_IP, op == BPF_DIV ? (u32)jit_udiv32 : (u32)jit_mod32, ctx); emit_blx_r(ARM_IP, ctx); + /* Restore caller-saved registers from stack */ + emit(ARM_POP(CALLER_MASK & ~exclude_mask), ctx); + /* Save return value */ if (rd != ARM_R0) emit(ARM_MOV_R(rd, ARM_R0), ctx); -- cgit v1.2.3 From 540cffbab8b8e6c52a4121666ca18d6e94586ed2 Mon Sep 17 00:00:00 2001 From: Andrey Gusakov Date: Thu, 23 Sep 2021 20:22:16 +0300 Subject: gpio: pca953x: do not ignore i2c errors Per gpio_chip interface, error shall be proparated to the caller. Attempt to silent diagnostics by returning zero (as written in the comment) is plain wrong, because the zero return can be interpreted by the caller as the gpio value. Cc: stable@vger.kernel.org Signed-off-by: Andrey Gusakov Signed-off-by: Nikita Yushchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index f5cfc0698799..8ebf369b3ba0 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -468,15 +468,8 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) mutex_lock(&chip->i2c_lock); ret = regmap_read(chip->regmap, inreg, ®_val); mutex_unlock(&chip->i2c_lock); - if (ret < 0) { - /* - * NOTE: - * diagnostic already emitted; that's all we should - * do unless gpio_*_value_cansleep() calls become different - * from their nonsleeping siblings (and report faults). - */ - return 0; - } + if (ret < 0) + return ret; return !!(reg_val & bit); } -- cgit v1.2.3 From d1d598104336075e7475d932d200b33108399225 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 20 Sep 2021 09:18:37 +0200 Subject: MAINTAINERS: update my email address My professional situation changes soon. Update my email address. Signed-off-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Acked-by: Andy Shevchenko --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b33791bb8e9..4b98ca39c803 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2961,7 +2961,7 @@ F: crypto/async_tx/ F: include/linux/async_tx.h AT24 EEPROM DRIVER -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-i2c@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git @@ -7985,7 +7985,7 @@ F: include/linux/gpio/regmap.h GPIO SUBSYSTEM M: Linus Walleij -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-gpio@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git @@ -11366,7 +11366,7 @@ F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml F: drivers/iio/proximity/mb1232.c MAXIM MAX77650 PMIC MFD DRIVER -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/*/*max77650.yaml @@ -18682,7 +18682,7 @@ F: include/linux/clk/ti.h TI DAVINCI MACHINE SUPPORT M: Sekhar Nori -R: Bartosz Golaszewski +R: Bartosz Golaszewski L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git -- cgit v1.2.3 From 040d985e27dc39353d50d0f75a6be3330f4fece2 Mon Sep 17 00:00:00 2001 From: Mun Yew Tham Date: Wed, 29 Sep 2021 08:49:11 +0800 Subject: MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer Update Altera Pio Driver maintainer's email from to Signed-off-by: Mun Yew Tham Acked-by: Joyce Ooi Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4b98ca39c803..01ff450dda42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -810,7 +810,7 @@ F: Documentation/devicetree/bindings/dma/altr,msgdma.yaml F: drivers/dma/altera-msgdma.c ALTERA PIO DRIVER -M: Joyce Ooi +M: Mun Yew Tham L: linux-gpio@vger.kernel.org S: Maintained F: drivers/gpio/gpio-altera.c -- cgit v1.2.3 From ce812992f239f45e13c820a52455fec6eacbce1e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 27 Sep 2021 21:47:48 +0900 Subject: ksmbd: remove NTLMv1 authentication MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove insecure NTLMv1 authentication. Cc: Ronnie Sahlberg Cc: Ralph Böhme Reviewed-by: Tom Talpey Acked-by: Steve French Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/auth.c | 205 -------------------------------------------------- fs/ksmbd/crypto_ctx.c | 16 ---- fs/ksmbd/crypto_ctx.h | 8 -- 3 files changed, 229 deletions(-) diff --git a/fs/ksmbd/auth.c b/fs/ksmbd/auth.c index de36f12070bf..71c989f1568d 100644 --- a/fs/ksmbd/auth.c +++ b/fs/ksmbd/auth.c @@ -68,125 +68,6 @@ void ksmbd_copy_gss_neg_header(void *buf) memcpy(buf, NEGOTIATE_GSS_HEADER, AUTH_GSS_LENGTH); } -static void -str_to_key(unsigned char *str, unsigned char *key) -{ - int i; - - key[0] = str[0] >> 1; - key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2); - key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3); - key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4); - key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5); - key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6); - key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7); - key[7] = str[6] & 0x7F; - for (i = 0; i < 8; i++) - key[i] = (key[i] << 1); -} - -static int -smbhash(unsigned char *out, const unsigned char *in, unsigned char *key) -{ - unsigned char key2[8]; - struct des_ctx ctx; - - if (fips_enabled) { - ksmbd_debug(AUTH, "FIPS compliance enabled: DES not permitted\n"); - return -ENOENT; - } - - str_to_key(key, key2); - des_expand_key(&ctx, key2, DES_KEY_SIZE); - des_encrypt(&ctx, out, in); - memzero_explicit(&ctx, sizeof(ctx)); - return 0; -} - -static int ksmbd_enc_p24(unsigned char *p21, const unsigned char *c8, unsigned char *p24) -{ - int rc; - - rc = smbhash(p24, c8, p21); - if (rc) - return rc; - rc = smbhash(p24 + 8, c8, p21 + 7); - if (rc) - return rc; - return smbhash(p24 + 16, c8, p21 + 14); -} - -/* produce a md4 message digest from data of length n bytes */ -static int ksmbd_enc_md4(unsigned char *md4_hash, unsigned char *link_str, - int link_len) -{ - int rc; - struct ksmbd_crypto_ctx *ctx; - - ctx = ksmbd_crypto_ctx_find_md4(); - if (!ctx) { - ksmbd_debug(AUTH, "Crypto md4 allocation error\n"); - return -ENOMEM; - } - - rc = crypto_shash_init(CRYPTO_MD4(ctx)); - if (rc) { - ksmbd_debug(AUTH, "Could not init md4 shash\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD4(ctx), link_str, link_len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with link_str\n"); - goto out; - } - - rc = crypto_shash_final(CRYPTO_MD4(ctx), md4_hash); - if (rc) - ksmbd_debug(AUTH, "Could not generate md4 hash\n"); -out: - ksmbd_release_crypto_ctx(ctx); - return rc; -} - -static int ksmbd_enc_update_sess_key(unsigned char *md5_hash, char *nonce, - char *server_challenge, int len) -{ - int rc; - struct ksmbd_crypto_ctx *ctx; - - ctx = ksmbd_crypto_ctx_find_md5(); - if (!ctx) { - ksmbd_debug(AUTH, "Crypto md5 allocation error\n"); - return -ENOMEM; - } - - rc = crypto_shash_init(CRYPTO_MD5(ctx)); - if (rc) { - ksmbd_debug(AUTH, "Could not init md5 shash\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD5(ctx), server_challenge, len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with challenge\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD5(ctx), nonce, len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with nonce\n"); - goto out; - } - - rc = crypto_shash_final(CRYPTO_MD5(ctx), md5_hash); - if (rc) - ksmbd_debug(AUTH, "Could not generate md5 hash\n"); -out: - ksmbd_release_crypto_ctx(ctx); - return rc; -} - /** * ksmbd_gen_sess_key() - function to generate session key * @sess: session of connection @@ -324,43 +205,6 @@ out: return ret; } -/** - * ksmbd_auth_ntlm() - NTLM authentication handler - * @sess: session of connection - * @pw_buf: NTLM challenge response - * @passkey: user password - * - * Return: 0 on success, error number on error - */ -int ksmbd_auth_ntlm(struct ksmbd_session *sess, char *pw_buf) -{ - int rc; - unsigned char p21[21]; - char key[CIFS_AUTH_RESP_SIZE]; - - memset(p21, '\0', 21); - memcpy(p21, user_passkey(sess->user), CIFS_NTHASH_SIZE); - rc = ksmbd_enc_p24(p21, sess->ntlmssp.cryptkey, key); - if (rc) { - pr_err("password processing failed\n"); - return rc; - } - - ksmbd_enc_md4(sess->sess_key, user_passkey(sess->user), - CIFS_SMB1_SESSKEY_SIZE); - memcpy(sess->sess_key + CIFS_SMB1_SESSKEY_SIZE, key, - CIFS_AUTH_RESP_SIZE); - sess->sequence_number = 1; - - if (strncmp(pw_buf, key, CIFS_AUTH_RESP_SIZE) != 0) { - ksmbd_debug(AUTH, "ntlmv1 authentication failed\n"); - return -EINVAL; - } - - ksmbd_debug(AUTH, "ntlmv1 authentication pass\n"); - return 0; -} - /** * ksmbd_auth_ntlmv2() - NTLMv2 authentication handler * @sess: session of connection @@ -441,44 +285,6 @@ out: return rc; } -/** - * __ksmbd_auth_ntlmv2() - NTLM2(extended security) authentication handler - * @sess: session of connection - * @client_nonce: client nonce from LM response. - * @ntlm_resp: ntlm response data from client. - * - * Return: 0 on success, error number on error - */ -static int __ksmbd_auth_ntlmv2(struct ksmbd_session *sess, char *client_nonce, - char *ntlm_resp) -{ - char sess_key[CIFS_SMB1_SESSKEY_SIZE] = {0}; - int rc; - unsigned char p21[21]; - char key[CIFS_AUTH_RESP_SIZE]; - - rc = ksmbd_enc_update_sess_key(sess_key, - client_nonce, - (char *)sess->ntlmssp.cryptkey, 8); - if (rc) { - pr_err("password processing failed\n"); - goto out; - } - - memset(p21, '\0', 21); - memcpy(p21, user_passkey(sess->user), CIFS_NTHASH_SIZE); - rc = ksmbd_enc_p24(p21, sess_key, key); - if (rc) { - pr_err("password processing failed\n"); - goto out; - } - - if (memcmp(ntlm_resp, key, CIFS_AUTH_RESP_SIZE) != 0) - rc = -EINVAL; -out: - return rc; -} - /** * ksmbd_decode_ntlmssp_auth_blob() - helper function to construct * authenticate blob @@ -512,17 +318,6 @@ int ksmbd_decode_ntlmssp_auth_blob(struct authenticate_message *authblob, nt_off = le32_to_cpu(authblob->NtChallengeResponse.BufferOffset); nt_len = le16_to_cpu(authblob->NtChallengeResponse.Length); - /* process NTLM authentication */ - if (nt_len == CIFS_AUTH_RESP_SIZE) { - if (le32_to_cpu(authblob->NegotiateFlags) & - NTLMSSP_NEGOTIATE_EXTENDED_SEC) - return __ksmbd_auth_ntlmv2(sess, (char *)authblob + - lm_off, (char *)authblob + nt_off); - else - return ksmbd_auth_ntlm(sess, (char *)authblob + - nt_off); - } - /* TODO : use domain name that imported from configuration file */ domain_name = smb_strndup_from_utf16((const char *)authblob + le32_to_cpu(authblob->DomainName.BufferOffset), diff --git a/fs/ksmbd/crypto_ctx.c b/fs/ksmbd/crypto_ctx.c index 5f4b1008d17e..81488d04199d 100644 --- a/fs/ksmbd/crypto_ctx.c +++ b/fs/ksmbd/crypto_ctx.c @@ -81,12 +81,6 @@ static struct shash_desc *alloc_shash_desc(int id) case CRYPTO_SHASH_SHA512: tfm = crypto_alloc_shash("sha512", 0, 0); break; - case CRYPTO_SHASH_MD4: - tfm = crypto_alloc_shash("md4", 0, 0); - break; - case CRYPTO_SHASH_MD5: - tfm = crypto_alloc_shash("md5", 0, 0); - break; default: return NULL; } @@ -214,16 +208,6 @@ struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha512(void) return ____crypto_shash_ctx_find(CRYPTO_SHASH_SHA512); } -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md4(void) -{ - return ____crypto_shash_ctx_find(CRYPTO_SHASH_MD4); -} - -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md5(void) -{ - return ____crypto_shash_ctx_find(CRYPTO_SHASH_MD5); -} - static struct ksmbd_crypto_ctx *____crypto_aead_ctx_find(int id) { struct ksmbd_crypto_ctx *ctx; diff --git a/fs/ksmbd/crypto_ctx.h b/fs/ksmbd/crypto_ctx.h index ef11154b43df..4a367c62f653 100644 --- a/fs/ksmbd/crypto_ctx.h +++ b/fs/ksmbd/crypto_ctx.h @@ -15,8 +15,6 @@ enum { CRYPTO_SHASH_CMACAES, CRYPTO_SHASH_SHA256, CRYPTO_SHASH_SHA512, - CRYPTO_SHASH_MD4, - CRYPTO_SHASH_MD5, CRYPTO_SHASH_MAX, }; @@ -43,8 +41,6 @@ struct ksmbd_crypto_ctx { #define CRYPTO_CMACAES(c) ((c)->desc[CRYPTO_SHASH_CMACAES]) #define CRYPTO_SHA256(c) ((c)->desc[CRYPTO_SHASH_SHA256]) #define CRYPTO_SHA512(c) ((c)->desc[CRYPTO_SHASH_SHA512]) -#define CRYPTO_MD4(c) ((c)->desc[CRYPTO_SHASH_MD4]) -#define CRYPTO_MD5(c) ((c)->desc[CRYPTO_SHASH_MD5]) #define CRYPTO_HMACMD5_TFM(c) ((c)->desc[CRYPTO_SHASH_HMACMD5]->tfm) #define CRYPTO_HMACSHA256_TFM(c)\ @@ -52,8 +48,6 @@ struct ksmbd_crypto_ctx { #define CRYPTO_CMACAES_TFM(c) ((c)->desc[CRYPTO_SHASH_CMACAES]->tfm) #define CRYPTO_SHA256_TFM(c) ((c)->desc[CRYPTO_SHASH_SHA256]->tfm) #define CRYPTO_SHA512_TFM(c) ((c)->desc[CRYPTO_SHASH_SHA512]->tfm) -#define CRYPTO_MD4_TFM(c) ((c)->desc[CRYPTO_SHASH_MD4]->tfm) -#define CRYPTO_MD5_TFM(c) ((c)->desc[CRYPTO_SHASH_MD5]->tfm) #define CRYPTO_GCM(c) ((c)->ccmaes[CRYPTO_AEAD_AES_GCM]) #define CRYPTO_CCM(c) ((c)->ccmaes[CRYPTO_AEAD_AES_CCM]) @@ -64,8 +58,6 @@ struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_hmacsha256(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_cmacaes(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha512(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha256(void); -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md4(void); -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md5(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_gcm(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_ccm(void); void ksmbd_crypto_destroy(void); -- cgit v1.2.3 From 41e76c6a3c83c85e849f10754b8632ea763d9be4 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Mon, 20 Sep 2021 16:25:33 -0700 Subject: nbd: use shifts rather than multiplies commit fad7cd3310db ("nbd: add the check to prevent overflow in __nbd_ioctl()") raised an issue from the fallback helpers added in commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and add fallback code") ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined! As Stephen Rothwell notes: The added check_mul_overflow() call is being passed 64 bit values. COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see include/linux/overflow.h). Specifically, the helpers for checking whether the results of a multiplication overflowed (__unsigned_mul_overflow, __signed_add_overflow) use the division operator when !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b operands on 32b hosts. This was fixed upstream by commit 76ae847497bc ("Documentation: raise minimum supported version of GCC to 5.1") which is not suitable to be backported to stable. Further, __builtin_mul_overflow() would emit a libcall to a compiler-rt-only symbol when compiling with clang < 14 for 32b targets. ld.lld: error: undefined symbol: __mulodi4 In order to keep stable buildable with GCC 4.9 and clang < 14, modify struct nbd_config to instead track the number of bits of the block size; reconstructing the block size using runtime checked shifts that are not problematic for those compilers and in a ways that can be backported to stable. In nbd_set_size, we do validate that the value of blksize must be a power of two (POT) and is in the range of [512, PAGE_SIZE] (both inclusive). This does modify the debugfs interface. Cc: stable@vger.kernel.org Cc: Arnd Bergmann Cc: Rasmus Villemoes Link: https://github.com/ClangBuiltLinux/linux/issues/1438 Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/ Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/ Reported-by: Naresh Kamboju Reported-by: Nathan Chancellor Reported-by: Stephen Rothwell Suggested-by: Kees Cook Suggested-by: Linus Torvalds Suggested-by: Pavel Machek Signed-off-by: Nick Desaulniers Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 5170a630778d..1183f7872b71 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -97,13 +97,18 @@ struct nbd_config { atomic_t recv_threads; wait_queue_head_t recv_wq; - loff_t blksize; + unsigned int blksize_bits; loff_t bytesize; #if IS_ENABLED(CONFIG_DEBUG_FS) struct dentry *dbg_dir; #endif }; +static inline unsigned int nbd_blksize(struct nbd_config *config) +{ + return 1u << config->blksize_bits; +} + struct nbd_device { struct blk_mq_tag_set tag_set; @@ -146,7 +151,7 @@ static struct dentry *nbd_dbg_dir; #define NBD_MAGIC 0x68797548 -#define NBD_DEF_BLKSIZE 1024 +#define NBD_DEF_BLKSIZE_BITS 10 static unsigned int nbds_max = 16; static int max_part = 16; @@ -317,12 +322,12 @@ static int nbd_set_size(struct nbd_device *nbd, loff_t bytesize, loff_t blksize) { if (!blksize) - blksize = NBD_DEF_BLKSIZE; + blksize = 1u << NBD_DEF_BLKSIZE_BITS; if (blksize < 512 || blksize > PAGE_SIZE || !is_power_of_2(blksize)) return -EINVAL; nbd->config->bytesize = bytesize; - nbd->config->blksize = blksize; + nbd->config->blksize_bits = __ffs(blksize); if (!nbd->task_recv) return 0; @@ -1337,7 +1342,7 @@ static int nbd_start_device(struct nbd_device *nbd) args->index = i; queue_work(nbd->recv_workq, &args->work); } - return nbd_set_size(nbd, config->bytesize, config->blksize); + return nbd_set_size(nbd, config->bytesize, nbd_blksize(config)); } static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *bdev) @@ -1406,11 +1411,11 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, case NBD_SET_BLKSIZE: return nbd_set_size(nbd, config->bytesize, arg); case NBD_SET_SIZE: - return nbd_set_size(nbd, arg, config->blksize); + return nbd_set_size(nbd, arg, nbd_blksize(config)); case NBD_SET_SIZE_BLOCKS: - if (check_mul_overflow((loff_t)arg, config->blksize, &bytesize)) + if (check_shl_overflow(arg, config->blksize_bits, &bytesize)) return -EINVAL; - return nbd_set_size(nbd, bytesize, config->blksize); + return nbd_set_size(nbd, bytesize, nbd_blksize(config)); case NBD_SET_TIMEOUT: nbd_set_cmd_timeout(nbd, arg); return 0; @@ -1476,7 +1481,7 @@ static struct nbd_config *nbd_alloc_config(void) atomic_set(&config->recv_threads, 0); init_waitqueue_head(&config->recv_wq); init_waitqueue_head(&config->conn_wait); - config->blksize = NBD_DEF_BLKSIZE; + config->blksize_bits = NBD_DEF_BLKSIZE_BITS; atomic_set(&config->live_connections, 0); try_module_get(THIS_MODULE); return config; @@ -1604,7 +1609,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd) debugfs_create_file("tasks", 0444, dir, nbd, &nbd_dbg_tasks_fops); debugfs_create_u64("size_bytes", 0444, dir, &config->bytesize); debugfs_create_u32("timeout", 0444, dir, &nbd->tag_set.timeout); - debugfs_create_u64("blocksize", 0444, dir, &config->blksize); + debugfs_create_u32("blocksize_bits", 0444, dir, &config->blksize_bits); debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_fops); return 0; @@ -1826,7 +1831,7 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { static int nbd_genl_size_set(struct genl_info *info, struct nbd_device *nbd) { struct nbd_config *config = nbd->config; - u64 bsize = config->blksize; + u64 bsize = nbd_blksize(config); u64 bytes = config->bytesize; if (info->attrs[NBD_ATTR_SIZE_BYTES]) @@ -1835,7 +1840,7 @@ static int nbd_genl_size_set(struct genl_info *info, struct nbd_device *nbd) if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]) bsize = nla_get_u64(info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]); - if (bytes != config->bytesize || bsize != config->blksize) + if (bytes != config->bytesize || bsize != nbd_blksize(config)) return nbd_set_size(nbd, bytes, bsize); return 0; } -- cgit v1.2.3 From 23c216b335d1fbd716076e8263b54a714ea3cf0e Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Thu, 30 Sep 2021 13:44:54 +1000 Subject: powerpc/iommu: Report the correct most efficient DMA mask for PCI devices According to dma-api.rst, the dma_get_required_mask() helper should return "the mask that the platform requires to operate efficiently". Which in the case of PPC64 means the bypass mask and not a mask from an IOMMU table which is shorter and slower to use due to map/unmap operations (especially expensive on "pseries"). However the existing implementation ignores the possibility of bypassing and returns the IOMMU table mask on the pseries platform which makes some drivers (mpt3sas is one example) choose 32bit DMA even though bypass is supported. The powernv platform sort of handles it by having a bigger default window with a mask >=40 but it only works as drivers choose 63/64bit if the required mask is >32 which is rather pointless. This reintroduces the bypass capability check to let drivers make a better choice of the DMA mask. Fixes: f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode") Signed-off-by: Alexey Kardashevskiy Reviewed-by: Christoph Hellwig Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210930034454.95794-1-aik@ozlabs.ru --- arch/powerpc/kernel/dma-iommu.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 111249fd619d..038ce8d9061d 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -184,6 +184,15 @@ u64 dma_iommu_get_required_mask(struct device *dev) struct iommu_table *tbl = get_iommu_table_base(dev); u64 mask; + if (dev_is_pci(dev)) { + u64 bypass_mask = dma_direct_get_required_mask(dev); + + if (dma_iommu_dma_supported(dev, bypass_mask)) { + dev_info(dev, "%s: returning bypass mask 0x%llx\n", __func__, bypass_mask); + return bypass_mask; + } + } + if (!tbl) return 0; -- cgit v1.2.3 From ad9af930680bb396c87582edc172b3a7cf2a3fbf Mon Sep 17 00:00:00 2001 From: Zelin Deng Date: Wed, 29 Sep 2021 13:13:48 +0800 Subject: x86/kvmclock: Move this_cpu_pvti into kvmclock.h There're other modules might use hv_clock_per_cpu variable like ptp_kvm, so move it into kvmclock.h and export the symbol to make it visiable to other modules. Signed-off-by: Zelin Deng Cc: Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvmclock.h | 14 ++++++++++++++ arch/x86/kernel/kvmclock.c | 13 ++----------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/x86/include/asm/kvmclock.h b/arch/x86/include/asm/kvmclock.h index eceea9299097..6c5765192102 100644 --- a/arch/x86/include/asm/kvmclock.h +++ b/arch/x86/include/asm/kvmclock.h @@ -2,6 +2,20 @@ #ifndef _ASM_X86_KVM_CLOCK_H #define _ASM_X86_KVM_CLOCK_H +#include + extern struct clocksource kvm_clock; +DECLARE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); + +static inline struct pvclock_vcpu_time_info *this_cpu_pvti(void) +{ + return &this_cpu_read(hv_clock_per_cpu)->pvti; +} + +static inline struct pvclock_vsyscall_time_info *this_cpu_hvclock(void) +{ + return this_cpu_read(hv_clock_per_cpu); +} + #endif /* _ASM_X86_KVM_CLOCK_H */ diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index ad273e5861c1..73c74b961d0f 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -49,18 +49,9 @@ early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall); static struct pvclock_vsyscall_time_info hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE); static struct pvclock_wall_clock wall_clock __bss_decrypted; -static DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); static struct pvclock_vsyscall_time_info *hvclock_mem; - -static inline struct pvclock_vcpu_time_info *this_cpu_pvti(void) -{ - return &this_cpu_read(hv_clock_per_cpu)->pvti; -} - -static inline struct pvclock_vsyscall_time_info *this_cpu_hvclock(void) -{ - return this_cpu_read(hv_clock_per_cpu); -} +DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); +EXPORT_PER_CPU_SYMBOL_GPL(hv_clock_per_cpu); /* * The wallclock is the time of day when we booted. Since then, some time may -- cgit v1.2.3 From 773e89ab0056aaa2baa1ffd9f044551654410104 Mon Sep 17 00:00:00 2001 From: Zelin Deng Date: Wed, 29 Sep 2021 13:13:49 +0800 Subject: ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements; if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is 64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with "src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and a wild pointer. Change it to "this_cpu_pvti()" which is guaranteed to be valid. Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable") Signed-off-by: Zelin Deng Cc: Message-Id: <1632892429-101194-3-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini --- drivers/ptp/ptp_kvm_x86.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/ptp/ptp_kvm_x86.c b/drivers/ptp/ptp_kvm_x86.c index 3dd519dfc473..d0096cd7096a 100644 --- a/drivers/ptp/ptp_kvm_x86.c +++ b/drivers/ptp/ptp_kvm_x86.c @@ -15,8 +15,6 @@ #include #include -struct pvclock_vsyscall_time_info *hv_clock; - static phys_addr_t clock_pair_gpa; static struct kvm_clock_pairing clock_pair; @@ -28,8 +26,7 @@ int kvm_arch_ptp_init(void) return -ENODEV; clock_pair_gpa = slow_virt_to_phys(&clock_pair); - hv_clock = pvclock_get_pvti_cpu0_va(); - if (!hv_clock) + if (!pvclock_get_pvti_cpu0_va()) return -ENODEV; ret = kvm_hypercall2(KVM_HC_CLOCK_PAIRING, clock_pair_gpa, @@ -64,10 +61,8 @@ int kvm_arch_ptp_get_crosststamp(u64 *cycle, struct timespec64 *tspec, struct pvclock_vcpu_time_info *src; unsigned int version; long ret; - int cpu; - cpu = smp_processor_id(); - src = &hv_clock[cpu].pvti; + src = this_cpu_pvti(); do { /* -- cgit v1.2.3 From e8a747d0884e554a8c1872da6c8f680a4f893c6d Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 29 Sep 2021 15:24:25 -0700 Subject: KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks Check whether a CPUID entry's index is significant before checking for a matching index to hack-a-fix an undefined behavior bug due to consuming uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve CPUID.0x1, which does _not_ have a significant index, and fails to initialize the dummy variable that doubles as EBX/ECX/EDX output _and_ ECX, a.k.a. index, input. Practically speaking, it's _extremely_ unlikely any compiler will yield code that causes problems, as the compiler would need to inline the kvm_cpuid() call to detect the uninitialized data, and intentionally hose the kernel, e.g. insert ud2, instead of simply ignoring the result of the index comparison. Although the sketchy "dummy" pattern was introduced in SVM by commit 66f7b72e1171 ("KVM: x86: Make register state after reset conform to specification"), it wasn't actually broken until commit 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the order of operations such that "index" was checked before the significant flag. Avoid consuming uninitialized data by reverting to checking the flag before the index purely so that the fix can be easily backported; the offending RESET/INIT code has been refactored, moved, and consolidated from vendor code to common x86 since the bug was introduced. A future patch will directly address the bad RESET/INIT behavior. The undefined behavior was detected by syzbot + KernelMemorySanitizer. BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68 BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline] kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline] kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534 vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788 kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020 Local variable ----dummy@kvm_vcpu_reset created at: kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com Reported-by: Alexander Potapenko Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping") Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Reviewed-by: Jim Mattson Message-Id: <20210929222426.1855730-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/cpuid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index fe03bd978761..751aa85a3001 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -65,8 +65,8 @@ static inline struct kvm_cpuid_entry2 *cpuid_entry2_find( for (i = 0; i < nent; i++) { e = &entries[i]; - if (e->function == function && (e->index == index || - !(e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX))) + if (e->function == function && + (!(e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) || e->index == index)) return e; } -- cgit v1.2.3 From 7b0035eaa7dab9fd33d6658ad6a755024bdce26c Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 29 Sep 2021 16:41:12 -0700 Subject: KVM: selftests: Ensure all migrations are performed when test is affined Rework the CPU selection in the migration worker to ensure the specified number of migrations are performed when the test iteslf is affined to a subset of CPUs. The existing logic skips iterations if the target CPU is not in the original set of possible CPUs, which causes the test to fail if too many iterations are skipped. ==== Test Assertion Failure ==== rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2) pid=10127 tid=10127 errno=4 - Interrupted system call 1 0x00000000004018e5: main at rseq_test.c:227 2 0x00007fcc8fc66bf6: ?? ??:0 3 0x0000000000401959: _start at ??:? Only performed 4 KVM_RUNs, task stalled too much? Calculate the min/max possible CPUs as a cheap "best effort" to avoid high runtimes when the test is affined to a small percentage of CPUs. Alternatively, a list or xarray of the possible CPUs could be used, but even in a horrendously inefficient setup, such optimizations are not needed because the runtime is completely dominated by the cost of migrating the task, and the absolute runtime is well under a minute in even truly absurd setups, e.g. running on a subset of vCPUs in a VM that is heavily overcommited (16 vCPUs per pCPU). Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Reported-by: Dongli Zhang Signed-off-by: Sean Christopherson Message-Id: <20210929234112.1862848-1-seanjc@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/rseq_test.c | 69 ++++++++++++++++++++++++++++----- 1 file changed, 59 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index c5e0dd664a7b..4158da0da2bb 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +40,7 @@ static __thread volatile struct rseq __rseq = { static pthread_t migration_thread; static cpu_set_t possible_mask; +static int min_cpu, max_cpu; static bool done; static atomic_t seq_cnt; @@ -57,20 +59,37 @@ static void sys_rseq(int flags) TEST_ASSERT(!r, "rseq failed, errno = %d (%s)", errno, strerror(errno)); } +static int next_cpu(int cpu) +{ + /* + * Advance to the next CPU, skipping those that weren't in the original + * affinity set. Sadly, there is no CPU_SET_FOR_EACH, and cpu_set_t's + * data storage is considered as opaque. Note, if this task is pinned + * to a small set of discontigous CPUs, e.g. 2 and 1023, this loop will + * burn a lot cycles and the test will take longer than normal to + * complete. + */ + do { + cpu++; + if (cpu > max_cpu) { + cpu = min_cpu; + TEST_ASSERT(CPU_ISSET(cpu, &possible_mask), + "Min CPU = %d must always be usable", cpu); + break; + } + } while (!CPU_ISSET(cpu, &possible_mask)); + + return cpu; +} + static void *migration_worker(void *ign) { cpu_set_t allowed_mask; - int r, i, nr_cpus, cpu; + int r, i, cpu; CPU_ZERO(&allowed_mask); - nr_cpus = CPU_COUNT(&possible_mask); - - for (i = 0; i < NR_TASK_MIGRATIONS; i++) { - cpu = i % nr_cpus; - if (!CPU_ISSET(cpu, &possible_mask)) - continue; - + for (i = 0, cpu = min_cpu; i < NR_TASK_MIGRATIONS; i++, cpu = next_cpu(cpu)) { CPU_SET(cpu, &allowed_mask); /* @@ -154,6 +173,36 @@ static void *migration_worker(void *ign) return NULL; } +static int calc_min_max_cpu(void) +{ + int i, cnt, nproc; + + if (CPU_COUNT(&possible_mask) < 2) + return -EINVAL; + + /* + * CPU_SET doesn't provide a FOR_EACH helper, get the min/max CPU that + * this task is affined to in order to reduce the time spent querying + * unusable CPUs, e.g. if this task is pinned to a small percentage of + * total CPUs. + */ + nproc = get_nprocs_conf(); + min_cpu = -1; + max_cpu = -1; + cnt = 0; + + for (i = 0; i < nproc; i++) { + if (!CPU_ISSET(i, &possible_mask)) + continue; + if (min_cpu == -1) + min_cpu = i; + max_cpu = i; + cnt++; + } + + return (cnt < 2) ? -EINVAL : 0; +} + int main(int argc, char *argv[]) { int r, i, snapshot; @@ -167,8 +216,8 @@ int main(int argc, char *argv[]) TEST_ASSERT(!r, "sched_getaffinity failed, errno = %d (%s)", errno, strerror(errno)); - if (CPU_COUNT(&possible_mask) < 2) { - print_skip("Only one CPU, task migration not possible\n"); + if (calc_min_max_cpu()) { + print_skip("Only one usable CPU, task migration not possible"); exit(KSFT_SKIP); } -- cgit v1.2.3 From b232537074fcaf0c2837abbb217429c097bb7598 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 30 Sep 2021 11:30:03 +0300 Subject: soc: ti: omap-prm: Fix external abort for am335x pruss Starting with v5.15-rc1, we may now see some am335x beaglebone black device produce the following error on pruss probe: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000 This has started with the enabling of pruss for am335x in the dts files. Turns out the is caused by the PRM reset handling not waiting for the reset bit to clear. To fix the issue, let's always wait for the reset bit to clear, even if there is a separate reset status register. We attempted to fix a similar issue for dra7 iva with a udelay() in commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva"). There is no longer a need for the udelay() for dra7 iva reset either with the check added for reset bit clearing. Cc: Drew Fustini Cc: Grygorii Strashko Cc: "H. Nikolaus Schaller" Cc: Robert Nelson Cc: Yongqin Liu Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva") Reported-by: Matti Vaittinen Tested-by: Matti Vaittinen Signed-off-by: Tony Lindgren --- drivers/soc/ti/omap_prm.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index ea64e187854e..f32e1cbbe8c5 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -825,25 +825,28 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev, writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl); spin_unlock_irqrestore(&reset->lock, flags); - if (!has_rstst) - goto exit; + /* wait for the reset bit to clear */ + ret = readl_relaxed_poll_timeout_atomic(reset->prm->base + + reset->prm->data->rstctrl, + v, !(v & BIT(id)), 1, + OMAP_RESET_MAX_WAIT); + if (ret) + pr_err("%s: timedout waiting for %s:%lu\n", __func__, + reset->prm->data->name, id); /* wait for the status to be set */ - ret = readl_relaxed_poll_timeout_atomic(reset->prm->base + + if (has_rstst) { + ret = readl_relaxed_poll_timeout_atomic(reset->prm->base + reset->prm->data->rstst, v, v & BIT(st_bit), 1, OMAP_RESET_MAX_WAIT); - if (ret) - pr_err("%s: timedout waiting for %s:%lu\n", __func__, - reset->prm->data->name, id); + if (ret) + pr_err("%s: timedout waiting for %s:%lu\n", __func__, + reset->prm->data->name, id); + } -exit: - if (reset->clkdm) { - /* At least dra7 iva needs a delay before clkdm idle */ - if (has_rstst) - udelay(1); + if (reset->clkdm) pdata->clkdm_allow_idle(reset->clkdm); - } return ret; } -- cgit v1.2.3 From 8ec59ac3ad29891c0afef627640df36f2daa0349 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 29 Sep 2021 09:35:40 +0200 Subject: ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer The check of the returned error code is missing in scarlett2_update_monitor_other(). Let's fix it. Fixes: d5bda7e03982 ("ALSA: usb-audio: scarlett2: Add support for the talkback feature") Reported-by: kernel test robot Cc: Link: https://lore.kernel.org/r/202109131831.9IodEzRx-lkp@intel.com Link: https://lore.kernel.org/r/20210929073540.9611-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/mixer_scarlett_gen2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 3d5848d5481b..53ebabf42472 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -2450,6 +2450,8 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer) err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_TALKBACK_MAP, 1, &bitmap); + if (err < 0) + return err; for (i = 0; i < num_mixes; i++, bitmap >>= 1) private->talkback_map[i] = bitmap & 1; } -- cgit v1.2.3 From eb676622846b34a751e2ff9b5910a5322a4e0000 Mon Sep 17 00:00:00 2001 From: John Liu Date: Thu, 30 Sep 2021 13:53:16 +0200 Subject: ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289 audio just like its sibling product XPS 9510, so it requires the same quirk to enable woofer output. Tested on my Dell Precision 5560. Signed-off-by: John Liu Cc: Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4407f7da57c4..f17bfc6007d3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8452,6 +8452,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a30, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK), + SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), -- cgit v1.2.3 From 49054556289e8787501630b7c7a9d407da02e296 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 29 Sep 2021 11:59:17 +0200 Subject: net: introduce and use lock_sock_fast_nested() Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by: Thomas Gleixner Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni Reviewed-by: Thomas Gleixner Signed-off-by: David S. Miller --- include/net/sock.h | 31 ++++++++++++++++++++++++++++++- net/core/sock.c | 20 ++------------------ net/mptcp/protocol.c | 2 +- 3 files changed, 33 insertions(+), 20 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index c005c3c750e8..dc3f8169312e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1623,7 +1623,36 @@ void release_sock(struct sock *sk); SINGLE_DEPTH_NESTING) #define bh_unlock_sock(__sk) spin_unlock(&((__sk)->sk_lock.slock)) -bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock); +bool __lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock); + +/** + * lock_sock_fast - fast version of lock_sock + * @sk: socket + * + * This version should be used for very small section, where process wont block + * return false if fast path is taken: + * + * sk_lock.slock locked, owned = 0, BH disabled + * + * return true if slow path is taken: + * + * sk_lock.slock unlocked, owned = 1, BH enabled + */ +static inline bool lock_sock_fast(struct sock *sk) +{ + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); + + return __lock_sock_fast(sk); +} + +/* fast socket lock variant for caller already holding a [different] socket lock */ +static inline bool lock_sock_fast_nested(struct sock *sk) +{ + mutex_acquire(&sk->sk_lock.dep_map, SINGLE_DEPTH_NESTING, 0, _RET_IP_); + + return __lock_sock_fast(sk); +} /** * unlock_sock_fast - complement of lock_sock_fast diff --git a/net/core/sock.c b/net/core/sock.c index 512e629f9780..7060d183216e 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3210,24 +3210,8 @@ void release_sock(struct sock *sk) } EXPORT_SYMBOL(release_sock); -/** - * lock_sock_fast - fast version of lock_sock - * @sk: socket - * - * This version should be used for very small section, where process wont block - * return false if fast path is taken: - * - * sk_lock.slock locked, owned = 0, BH disabled - * - * return true if slow path is taken: - * - * sk_lock.slock unlocked, owned = 1, BH enabled - */ -bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) +bool __lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) { - /* The sk_lock has mutex_lock() semantics here. */ - mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); - might_sleep(); spin_lock_bh(&sk->sk_lock.slock); @@ -3256,7 +3240,7 @@ bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) spin_unlock_bh(&sk->sk_lock.slock); return true; } -EXPORT_SYMBOL(lock_sock_fast); +EXPORT_SYMBOL(__lock_sock_fast); int sock_gettstamp(struct socket *sock, void __user *userstamp, bool timeval, bool time32) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index dbcebf56798f..e5df0b5971c8 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -2735,7 +2735,7 @@ cleanup: inet_csk(sk)->icsk_mtup.probe_timestamp = tcp_jiffies32; mptcp_for_each_subflow(mptcp_sk(sk), subflow) { struct sock *ssk = mptcp_subflow_tcp_sock(subflow); - bool slow = lock_sock_fast(ssk); + bool slow = lock_sock_fast_nested(ssk); sock_orphan(ssk); unlock_sock_fast(ssk, slow); -- cgit v1.2.3 From 1f8763c59c4ec6254d629fe77c0a52220bd907aa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Sep 2021 13:41:14 +0200 Subject: ALSA: seq: Fix a potential UAF by wrong private_free call order John Keeping reported and posted a patch for a potential UAF in rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be called after the associated rawmidi object got already freed. After a deeper look, it turned out that the bug is rather the incorrect private_free call order for a snd_seq_device. The snd_seq_device private_free gets called at the release callback of the sequencer device object, while this was rather expected to be executed at the snd_device call chains that runs at the beginning of the whole card-free procedure. It's been broken since the rewrite of sequencer-device binding (although it hasn't surfaced because the sequencer device release happens usually right along with the card device release). This patch corrects the private_free call to be done in the right place, at snd_seq_device_dev_free(). Fixes: 7c37ae5c625a ("ALSA: seq: Rewrite sequencer device binding with standard bus") Reported-and-tested-by: John Keeping Cc: Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/seq_device.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/sound/core/seq_device.c b/sound/core/seq_device.c index 382275c5b193..7f3fd8eb016f 100644 --- a/sound/core/seq_device.c +++ b/sound/core/seq_device.c @@ -156,6 +156,8 @@ static int snd_seq_device_dev_free(struct snd_device *device) struct snd_seq_device *dev = device->device_data; cancel_autoload_drivers(); + if (dev->private_free) + dev->private_free(dev); put_device(&dev->dev); return 0; } @@ -183,11 +185,7 @@ static int snd_seq_device_dev_disconnect(struct snd_device *device) static void snd_seq_dev_release(struct device *dev) { - struct snd_seq_device *sdev = to_seq_dev(dev); - - if (sdev->private_free) - sdev->private_free(sdev); - kfree(sdev); + kfree(to_seq_dev(dev)); } /* -- cgit v1.2.3 From d5ef190693a7d76c5c192d108e8dec48307b46ee Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Wed, 29 Sep 2021 18:08:49 +0300 Subject: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17 [ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003 [ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40 [ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f [ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088 [ 352.843784] Allocated by task 2960: [ 352.844451] kasan_save_stack+0x1b/0x40 [ 352.845173] __kasan_kmalloc+0x7c/0x90 [ 352.845873] fl_change+0x282/0x22db [cls_flower] [ 352.846696] tc_new_tfilter+0x6cf/0x1180 [ 352.847493] rtnetlink_rcv_msg+0x471/0x550 [ 352.848323] netlink_rcv_skb+0xc6/0x1f0 [ 352.849097] netlink_unicast+0x353/0x480 [ 352.849886] netlink_sendmsg+0x396/0x680 [ 352.850678] sock_sendmsg+0x6c/0x80 [ 352.851398] ____sys_sendmsg+0x3a5/0x3c0 [ 352.852202] ___sys_sendmsg+0xd8/0x140 [ 352.852967] __sys_sendmsg+0xb3/0x130 [ 352.853718] do_syscall_64+0x35/0x80 [ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.855830] Freed by task 7: [ 352.856421] kasan_save_stack+0x1b/0x40 [ 352.857139] kasan_set_track+0x1c/0x30 [ 352.857854] kasan_set_free_info+0x20/0x30 [ 352.858609] __kasan_slab_free+0xed/0x130 [ 352.859348] kfree+0xa7/0x3c0 [ 352.859951] process_one_work+0x44d/0x780 [ 352.860685] worker_thread+0x2e2/0x7e0 [ 352.861390] kthread+0x1f4/0x220 [ 352.862022] ret_from_fork+0x1f/0x30 [ 352.862955] Last potentially related work creation: [ 352.863758] kasan_save_stack+0x1b/0x40 [ 352.864378] kasan_record_aux_stack+0xab/0xc0 [ 352.865028] insert_work+0x30/0x160 [ 352.865617] __queue_work+0x351/0x670 [ 352.866261] rcu_work_rcufn+0x30/0x40 [ 352.866917] rcu_core+0x3b2/0xdb0 [ 352.867561] __do_softirq+0xf6/0x386 [ 352.868708] Second to last potentially related work creation: [ 352.869779] kasan_save_stack+0x1b/0x40 [ 352.870560] kasan_record_aux_stack+0xab/0xc0 [ 352.871426] call_rcu+0x5f/0x5c0 [ 352.872108] queue_rcu_work+0x44/0x50 [ 352.872855] __fl_put+0x17c/0x240 [cls_flower] [ 352.873733] fl_delete+0xc7/0x100 [cls_flower] [ 352.874607] tc_del_tfilter+0x510/0xb30 [ 352.886085] rtnetlink_rcv_msg+0x471/0x550 [ 352.886875] netlink_rcv_skb+0xc6/0x1f0 [ 352.887636] netlink_unicast+0x353/0x480 [ 352.888285] netlink_sendmsg+0x396/0x680 [ 352.888942] sock_sendmsg+0x6c/0x80 [ 352.889583] ____sys_sendmsg+0x3a5/0x3c0 [ 352.890311] ___sys_sendmsg+0xd8/0x140 [ 352.891019] __sys_sendmsg+0xb3/0x130 [ 352.891716] do_syscall_64+0x35/0x80 [ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.893666] The buggy address belongs to the object at ffff8881c8251000 which belongs to the cache kmalloc-2k of size 2048 [ 352.895696] The buggy address is located 1152 bytes inside of 2048-byte region [ffff8881c8251000, ffff8881c8251800) [ 352.897640] The buggy address belongs to the page: [ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250 [ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0 [ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00 [ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 352.905861] page dumped because: kasan: bad access detected [ 352.907323] Memory state around the buggy address: [ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.912012] ^ [ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.915185] ================================================================== Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()") Signed-off-by: Vlad Buslov Acked-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/cls_flower.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index 23b21253b3c3..eb6345a027e1 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -2188,18 +2188,24 @@ static void fl_walk(struct tcf_proto *tp, struct tcf_walker *arg, arg->count = arg->skip; + rcu_read_lock(); idr_for_each_entry_continue_ul(&head->handle_idr, f, tmp, id) { /* don't return filters that are being deleted */ if (!refcount_inc_not_zero(&f->refcnt)) continue; + rcu_read_unlock(); + if (arg->fn(tp, f, arg) < 0) { __fl_put(f); arg->stop = 1; + rcu_read_lock(); break; } __fl_put(f); arg->count++; + rcu_read_lock(); } + rcu_read_unlock(); arg->cookie = id; } -- cgit v1.2.3 From 42871e95a3afea8956d8cc567ea725b33a837775 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 29 Sep 2021 22:15:12 +0200 Subject: ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working Commit 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling") replaced the nau8824_dapm_enable_pin() helper with direct calls to snd_soc_dapm_enable_pin(), but the helper was using snd_soc_dapm_force_enable_pin() and not forcing the MICBIAS + SAR supplies on breaks headphone vs headset and button-press detection. Replace the snd_soc_dapm_enable_pin() calls with snd_soc_dapm_force_enable_pin() to fix this. Cc: stable@vger.kernel.org Fixes: 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210929201512.460360-1-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/codecs/nau8824.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index db88be48c998..f946ef65a4c1 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -867,8 +867,8 @@ static void nau8824_jdet_work(struct work_struct *work) struct regmap *regmap = nau8824->regmap; int adc_value, event = 0, event_mask = 0; - snd_soc_dapm_enable_pin(dapm, "MICBIAS"); - snd_soc_dapm_enable_pin(dapm, "SAR"); + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); snd_soc_dapm_sync(dapm); msleep(100); -- cgit v1.2.3 From a5b8fd657881003ea11c193d147c8f4ba143725d Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 29 Sep 2021 08:32:24 -0700 Subject: net: dev_addr_list: handle first address in __hw_addr_add_ex struct dev_addr_list is used for device addresses, unicast addresses and multicast addresses. The first of those needs special handling of the main address - netdev->dev_addr points directly the data of the entry and drivers write to it freely, so we can't maintain it in the rbtree (for now, at least, to be fixed in net-next). Current work around sprinkles special handling of the first address on the list throughout the code but it missed the case where address is being added. First address will not be visible during subsequent adds. Syzbot found a warning where unicast addresses are modified without holding the rtnl lock, tl;dr is that team generates the same modification multiple times, not necessarily when right locks are held. In the repro we have: macvlan -> team -> veth macvlan adds a unicast address to the team. Team then pushes that address down to its memebers (veths). Next something unrelated makes team sync member addrs again, and because of the bug the addr entries get duplicated in the veths. macvlan gets removed, removes its addr from team which removes only one of the duplicated addresses from veths. This removal is done under rtnl. Next syzbot uses iptables to add a multicast addr to team (which does not hold rtnl lock). Team syncs veth addrs, but because veths' unicast list still has the duplicate it will also get sync, even though this update is intended for mc addresses. Again, uc address updates need rtnl lock, boom. Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8c39283c26ae..f0cb38344126 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -50,6 +50,11 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, if (addr_len > MAX_ADDR_LEN) return -EINVAL; + ha = list_first_entry(&list->list, struct netdev_hw_addr, list); + if (ha && !memcmp(addr, ha->addr, addr_len) && + (!addr_type || addr_type == ha->type)) + goto found_it; + while (*ins_point) { int diff; @@ -64,6 +69,7 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, } else if (diff > 0) { ins_point = &parent->rb_right; } else { +found_it: if (exclusive) return -EEXIST; if (global) { -- cgit v1.2.3 From 656ed8b015f19bf3f6e6b3ddd9a4bb4aa5ca73e1 Mon Sep 17 00:00:00 2001 From: Wong Vee Khee Date: Thu, 30 Sep 2021 14:44:36 +0800 Subject: net: stmmac: fix EEE init issue when paired with EEE capable PHYs When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY, and the PHY is advertising EEE by default, we need to enable EEE on the xPCS side too, instead of having user to manually trigger the enabling config via ethtool. Fixed this by adding xpcs_config_eee() call in stmmac_eee_init(). Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 553c4403258a..981ccf47dcea 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -486,6 +486,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv) timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0); stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS, eee_tw_timer); + if (priv->hw->xpcs) + xpcs_config_eee(priv->hw->xpcs, + priv->plat->mult_fact_100ns, + true); } if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) { -- cgit v1.2.3 From 35306eb23814444bd4021f8a1c3047d3cb0c8b2b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Sep 2021 15:57:50 -0700 Subject: af_unix: fix races in sk_peer_pid and sk_peer_cred accesses Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet Reported-by: Jann Horn Cc: Eric W. Biederman Cc: Luiz Augusto von Dentz Cc: Marcel Holtmann Signed-off-by: David S. Miller --- include/net/sock.h | 2 ++ net/core/sock.c | 32 ++++++++++++++++++++++++++------ net/unix/af_unix.c | 34 ++++++++++++++++++++++++++++------ 3 files changed, 56 insertions(+), 12 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index dc3f8169312e..ae929e21a376 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -488,8 +488,10 @@ struct sock { u8 sk_prefer_busy_poll; u16 sk_busy_poll_budget; #endif + spinlock_t sk_peer_lock; struct pid *sk_peer_pid; const struct cred *sk_peer_cred; + long sk_rcvtimeo; ktime_t sk_stamp; #if BITS_PER_LONG==32 diff --git a/net/core/sock.c b/net/core/sock.c index 7060d183216e..c1601f75ec4b 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1376,6 +1376,16 @@ set_sndbuf: } EXPORT_SYMBOL(sock_setsockopt); +static const struct cred *sk_get_peer_cred(struct sock *sk) +{ + const struct cred *cred; + + spin_lock(&sk->sk_peer_lock); + cred = get_cred(sk->sk_peer_cred); + spin_unlock(&sk->sk_peer_lock); + + return cred; +} static void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred) @@ -1552,7 +1562,11 @@ int sock_getsockopt(struct socket *sock, int level, int optname, struct ucred peercred; if (len > sizeof(peercred)) len = sizeof(peercred); + + spin_lock(&sk->sk_peer_lock); cred_to_ucred(sk->sk_peer_pid, sk->sk_peer_cred, &peercred); + spin_unlock(&sk->sk_peer_lock); + if (copy_to_user(optval, &peercred, len)) return -EFAULT; goto lenout; @@ -1560,20 +1574,23 @@ int sock_getsockopt(struct socket *sock, int level, int optname, case SO_PEERGROUPS: { + const struct cred *cred; int ret, n; - if (!sk->sk_peer_cred) + cred = sk_get_peer_cred(sk); + if (!cred) return -ENODATA; - n = sk->sk_peer_cred->group_info->ngroups; + n = cred->group_info->ngroups; if (len < n * sizeof(gid_t)) { len = n * sizeof(gid_t); + put_cred(cred); return put_user(len, optlen) ? -EFAULT : -ERANGE; } len = n * sizeof(gid_t); - ret = groups_to_user((gid_t __user *)optval, - sk->sk_peer_cred->group_info); + ret = groups_to_user((gid_t __user *)optval, cred->group_info); + put_cred(cred); if (ret) return ret; goto lenout; @@ -1935,9 +1952,10 @@ static void __sk_destruct(struct rcu_head *head) sk->sk_frag.page = NULL; } - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + /* We do not need to acquire sk->sk_peer_lock, we are the last user. */ + put_cred(sk->sk_peer_cred); put_pid(sk->sk_peer_pid); + if (likely(sk->sk_net_refcnt)) put_net(sock_net(sk)); sk_prot_free(sk->sk_prot_creator, sk); @@ -3145,6 +3163,8 @@ void sock_init_data(struct socket *sock, struct sock *sk) sk->sk_peer_pid = NULL; sk->sk_peer_cred = NULL; + spin_lock_init(&sk->sk_peer_lock); + sk->sk_write_pending = 0; sk->sk_rcvlowat = 1; sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f505b89bda6a..efac5989edb5 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -608,20 +608,42 @@ static void unix_release_sock(struct sock *sk, int embrion) static void init_peercred(struct sock *sk) { - put_pid(sk->sk_peer_pid); - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + const struct cred *old_cred; + struct pid *old_pid; + + spin_lock(&sk->sk_peer_lock); + old_pid = sk->sk_peer_pid; + old_cred = sk->sk_peer_cred; sk->sk_peer_pid = get_pid(task_tgid(current)); sk->sk_peer_cred = get_current_cred(); + spin_unlock(&sk->sk_peer_lock); + + put_pid(old_pid); + put_cred(old_cred); } static void copy_peercred(struct sock *sk, struct sock *peersk) { - put_pid(sk->sk_peer_pid); - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + const struct cred *old_cred; + struct pid *old_pid; + + if (sk < peersk) { + spin_lock(&sk->sk_peer_lock); + spin_lock_nested(&peersk->sk_peer_lock, SINGLE_DEPTH_NESTING); + } else { + spin_lock(&peersk->sk_peer_lock); + spin_lock_nested(&sk->sk_peer_lock, SINGLE_DEPTH_NESTING); + } + old_pid = sk->sk_peer_pid; + old_cred = sk->sk_peer_cred; sk->sk_peer_pid = get_pid(peersk->sk_peer_pid); sk->sk_peer_cred = get_cred(peersk->sk_peer_cred); + + spin_unlock(&sk->sk_peer_lock); + spin_unlock(&peersk->sk_peer_lock); + + put_pid(old_pid); + put_cred(old_cred); } static int unix_listen(struct socket *sock, int backlog) -- cgit v1.2.3 From 30e29a9a2bc6a4888335a6ede968b75cd329657a Mon Sep 17 00:00:00 2001 From: Tatsuhiko Yasumatsu Date: Thu, 30 Sep 2021 22:55:45 +0900 Subject: bpf: Fix integer overflow in prealloc_elems_and_freelist() In prealloc_elems_and_freelist(), the multiplication to calculate the size passed to bpf_map_area_alloc() could lead to an integer overflow. As a result, out-of-bounds write could occur in pcpu_freelist_populate() as reported by KASAN: [...] [ 16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100 [ 16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78 [ 16.970038] [ 16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1 [ 16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 16.972026] Call Trace: [ 16.972306] dump_stack_lvl+0x34/0x44 [ 16.972687] print_address_description.constprop.0+0x21/0x140 [ 16.973297] ? pcpu_freelist_populate+0xd9/0x100 [ 16.973777] ? pcpu_freelist_populate+0xd9/0x100 [ 16.974257] kasan_report.cold+0x7f/0x11b [ 16.974681] ? pcpu_freelist_populate+0xd9/0x100 [ 16.975190] pcpu_freelist_populate+0xd9/0x100 [ 16.975669] stack_map_alloc+0x209/0x2a0 [ 16.976106] __sys_bpf+0xd83/0x2ce0 [...] The possibility of this overflow was originally discussed in [0], but was overlooked. Fix the integer overflow by changing elem_size to u64 from u32. [0] https://lore.kernel.org/bpf/728b238e-a481-eb50-98e9-b0f430ab01e7@gmail.com/ Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation") Signed-off-by: Tatsuhiko Yasumatsu Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210930135545.173698-1-th.yasumatsu@gmail.com --- kernel/bpf/stackmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index 09a3fd97d329..6e75bbee39f0 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -63,7 +63,8 @@ static inline int stack_map_data_size(struct bpf_map *map) static int prealloc_elems_and_freelist(struct bpf_stack_map *smap) { - u32 elem_size = sizeof(struct stack_map_bucket) + smap->map.value_size; + u64 elem_size = sizeof(struct stack_map_bucket) + + (u64)smap->map.value_size; int err; smap->elems = bpf_map_area_alloc(elem_size * smap->map.max_entries, -- cgit v1.2.3 From 88d300522cbb2827b679359e98cbadfb46e8226c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:37:18 +0900 Subject: ksmbd: use correct basic info level in set_file_basic_info() Use correct basic info level in set/get_file_basic_info(). Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 13 ++++++------- fs/ksmbd/smb2pdu.h | 9 +++++++++ 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index cea376b2dd8f..ce10873cfded 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4161,7 +4161,7 @@ static void get_file_access_info(struct smb2_query_info_rsp *rsp, static int get_file_basic_info(struct smb2_query_info_rsp *rsp, struct ksmbd_file *fp, void *rsp_org) { - struct smb2_file_all_info *basic_info; + struct smb2_file_basic_info *basic_info; struct kstat stat; u64 time; @@ -4171,7 +4171,7 @@ static int get_file_basic_info(struct smb2_query_info_rsp *rsp, return -EACCES; } - basic_info = (struct smb2_file_all_info *)rsp->Buffer; + basic_info = (struct smb2_file_basic_info *)rsp->Buffer; generic_fillattr(file_mnt_user_ns(fp->filp), file_inode(fp->filp), &stat); basic_info->CreationTime = cpu_to_le64(fp->create_time); @@ -4184,9 +4184,8 @@ static int get_file_basic_info(struct smb2_query_info_rsp *rsp, basic_info->Attributes = fp->f_ci->m_fattr; basic_info->Pad1 = 0; rsp->OutputBufferLength = - cpu_to_le32(offsetof(struct smb2_file_all_info, AllocationSize)); - inc_rfc1001_len(rsp_org, offsetof(struct smb2_file_all_info, - AllocationSize)); + cpu_to_le32(sizeof(struct smb2_file_basic_info)); + inc_rfc1001_len(rsp_org, sizeof(struct smb2_file_basic_info)); return 0; } @@ -5412,7 +5411,7 @@ out: static int set_file_basic_info(struct ksmbd_file *fp, char *buf, struct ksmbd_share_config *share) { - struct smb2_file_all_info *file_info; + struct smb2_file_basic_info *file_info; struct iattr attrs; struct timespec64 ctime; struct file *filp; @@ -5423,7 +5422,7 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, if (!(fp->daccess & FILE_WRITE_ATTRIBUTES_LE)) return -EACCES; - file_info = (struct smb2_file_all_info *)buf; + file_info = (struct smb2_file_basic_info *)buf; attrs.ia_valid = 0; filp = fp->filp; inode = file_inode(filp); diff --git a/fs/ksmbd/smb2pdu.h b/fs/ksmbd/smb2pdu.h index bcec845b03f3..261825d06391 100644 --- a/fs/ksmbd/smb2pdu.h +++ b/fs/ksmbd/smb2pdu.h @@ -1464,6 +1464,15 @@ struct smb2_file_all_info { /* data block encoding of response to level 18 */ char FileName[1]; } __packed; /* level 18 Query */ +struct smb2_file_basic_info { /* data block encoding of response to level 18 */ + __le64 CreationTime; /* Beginning of FILE_BASIC_INFO equivalent */ + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + __le32 Attributes; + __u32 Pad1; /* End of FILE_BASIC_INFO_INFO equivalent */ +} __packed; + struct smb2_file_alt_name_info { __le32 FileNameLength; char FileName[0]; -- cgit v1.2.3 From 9496e268e3af78a92778bf635488a8ec2dca8996 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:41:48 +0900 Subject: ksmbd: add request buffer validation in smb2_set_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add buffer validation in smb2_set_info, and remove unused variable in set_file_basic_info. and smb2_set_info infolevel functions take structure pointer argument. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Sergey Senozhatsky Acked-by: Hyunchul Lee Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 149 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 107 insertions(+), 42 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index ce10873cfded..0d915554f532 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2102,16 +2102,22 @@ out: * smb2_set_ea() - handler for setting extended attributes using set * info command * @eabuf: set info command buffer + * @buf_len: set info command buffer length * @path: dentry path for get ea * * Return: 0 on success, otherwise error */ -static int smb2_set_ea(struct smb2_ea_info *eabuf, struct path *path) +static int smb2_set_ea(struct smb2_ea_info *eabuf, unsigned int buf_len, + struct path *path) { struct user_namespace *user_ns = mnt_user_ns(path->mnt); char *attr_name = NULL, *value; int rc = 0; - int next = 0; + unsigned int next = 0; + + if (buf_len < sizeof(struct smb2_ea_info) + eabuf->EaNameLength + + le16_to_cpu(eabuf->EaValueLength)) + return -EINVAL; attr_name = kmalloc(XATTR_NAME_MAX + 1, GFP_KERNEL); if (!attr_name) @@ -2176,7 +2182,13 @@ static int smb2_set_ea(struct smb2_ea_info *eabuf, struct path *path) next: next = le32_to_cpu(eabuf->NextEntryOffset); + if (next == 0 || buf_len < next) + break; + buf_len -= next; eabuf = (struct smb2_ea_info *)((char *)eabuf + next); + if (next < (u32)eabuf->EaNameLength + le16_to_cpu(eabuf->EaValueLength)) + break; + } while (next != 0); kfree(attr_name); @@ -2757,7 +2769,15 @@ int smb2_open(struct ksmbd_work *work) created = true; user_ns = mnt_user_ns(path.mnt); if (ea_buf) { - rc = smb2_set_ea(&ea_buf->ea, &path); + if (le32_to_cpu(ea_buf->ccontext.DataLength) < + sizeof(struct smb2_ea_info)) { + rc = -EINVAL; + goto err_out; + } + + rc = smb2_set_ea(&ea_buf->ea, + le32_to_cpu(ea_buf->ccontext.DataLength), + &path); if (rc == -EOPNOTSUPP) rc = 0; else if (rc) @@ -5341,7 +5361,7 @@ out: static int smb2_create_link(struct ksmbd_work *work, struct ksmbd_share_config *share, struct smb2_file_link_info *file_info, - struct file *filp, + unsigned int buf_len, struct file *filp, struct nls_table *local_nls) { char *link_name = NULL, *target_name = NULL, *pathname = NULL; @@ -5349,6 +5369,10 @@ static int smb2_create_link(struct ksmbd_work *work, bool file_present = true; int rc; + if (buf_len < (u64)sizeof(struct smb2_file_link_info) + + le32_to_cpu(file_info->FileNameLength)) + return -EINVAL; + ksmbd_debug(SMB, "setting FILE_LINK_INFORMATION\n"); pathname = kmalloc(PATH_MAX, GFP_KERNEL); if (!pathname) @@ -5408,10 +5432,10 @@ out: return rc; } -static int set_file_basic_info(struct ksmbd_file *fp, char *buf, +static int set_file_basic_info(struct ksmbd_file *fp, + struct smb2_file_basic_info *file_info, struct ksmbd_share_config *share) { - struct smb2_file_basic_info *file_info; struct iattr attrs; struct timespec64 ctime; struct file *filp; @@ -5422,7 +5446,6 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, if (!(fp->daccess & FILE_WRITE_ATTRIBUTES_LE)) return -EACCES; - file_info = (struct smb2_file_basic_info *)buf; attrs.ia_valid = 0; filp = fp->filp; inode = file_inode(filp); @@ -5499,7 +5522,8 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, } static int set_file_allocation_info(struct ksmbd_work *work, - struct ksmbd_file *fp, char *buf) + struct ksmbd_file *fp, + struct smb2_file_alloc_info *file_alloc_info) { /* * TODO : It's working fine only when store dos attributes @@ -5507,7 +5531,6 @@ static int set_file_allocation_info(struct ksmbd_work *work, * properly with any smb.conf option */ - struct smb2_file_alloc_info *file_alloc_info; loff_t alloc_blks; struct inode *inode; int rc; @@ -5515,7 +5538,6 @@ static int set_file_allocation_info(struct ksmbd_work *work, if (!(fp->daccess & FILE_WRITE_DATA_LE)) return -EACCES; - file_alloc_info = (struct smb2_file_alloc_info *)buf; alloc_blks = (le64_to_cpu(file_alloc_info->AllocationSize) + 511) >> 9; inode = file_inode(fp->filp); @@ -5551,9 +5573,8 @@ static int set_file_allocation_info(struct ksmbd_work *work, } static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, - char *buf) + struct smb2_file_eof_info *file_eof_info) { - struct smb2_file_eof_info *file_eof_info; loff_t newsize; struct inode *inode; int rc; @@ -5561,7 +5582,6 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, if (!(fp->daccess & FILE_WRITE_DATA_LE)) return -EACCES; - file_eof_info = (struct smb2_file_eof_info *)buf; newsize = le64_to_cpu(file_eof_info->EndOfFile); inode = file_inode(fp->filp); @@ -5588,7 +5608,8 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, } static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, - char *buf) + struct smb2_file_rename_info *rename_info, + unsigned int buf_len) { struct user_namespace *user_ns; struct ksmbd_file *parent_fp; @@ -5601,6 +5622,10 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, return -EACCES; } + if (buf_len < (u64)sizeof(struct smb2_file_rename_info) + + le32_to_cpu(rename_info->FileNameLength)) + return -EINVAL; + user_ns = file_mnt_user_ns(fp->filp); if (ksmbd_stream_fd(fp)) goto next; @@ -5623,14 +5648,13 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, } } next: - return smb2_rename(work, fp, user_ns, - (struct smb2_file_rename_info *)buf, + return smb2_rename(work, fp, user_ns, rename_info, work->sess->conn->local_nls); } -static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) +static int set_file_disposition_info(struct ksmbd_file *fp, + struct smb2_file_disposition_info *file_info) { - struct smb2_file_disposition_info *file_info; struct inode *inode; if (!(fp->daccess & FILE_DELETE_LE)) { @@ -5639,7 +5663,6 @@ static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) } inode = file_inode(fp->filp); - file_info = (struct smb2_file_disposition_info *)buf; if (file_info->DeletePending) { if (S_ISDIR(inode->i_mode) && ksmbd_vfs_empty_dir(fp) == -ENOTEMPTY) @@ -5651,15 +5674,14 @@ static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) return 0; } -static int set_file_position_info(struct ksmbd_file *fp, char *buf) +static int set_file_position_info(struct ksmbd_file *fp, + struct smb2_file_pos_info *file_info) { - struct smb2_file_pos_info *file_info; loff_t current_byte_offset; unsigned long sector_size; struct inode *inode; inode = file_inode(fp->filp); - file_info = (struct smb2_file_pos_info *)buf; current_byte_offset = le64_to_cpu(file_info->CurrentByteOffset); sector_size = inode->i_sb->s_blocksize; @@ -5675,12 +5697,11 @@ static int set_file_position_info(struct ksmbd_file *fp, char *buf) return 0; } -static int set_file_mode_info(struct ksmbd_file *fp, char *buf) +static int set_file_mode_info(struct ksmbd_file *fp, + struct smb2_file_mode_info *file_info) { - struct smb2_file_mode_info *file_info; __le32 mode; - file_info = (struct smb2_file_mode_info *)buf; mode = file_info->Mode; if ((mode & ~FILE_MODE_INFO_MASK) || @@ -5710,40 +5731,74 @@ static int set_file_mode_info(struct ksmbd_file *fp, char *buf) * TODO: need to implement an error handling for STATUS_INFO_LENGTH_MISMATCH */ static int smb2_set_info_file(struct ksmbd_work *work, struct ksmbd_file *fp, - int info_class, char *buf, + struct smb2_set_info_req *req, struct ksmbd_share_config *share) { - switch (info_class) { + unsigned int buf_len = le32_to_cpu(req->BufferLength); + + switch (req->FileInfoClass) { case FILE_BASIC_INFORMATION: - return set_file_basic_info(fp, buf, share); + { + if (buf_len < sizeof(struct smb2_file_basic_info)) + return -EINVAL; + return set_file_basic_info(fp, (struct smb2_file_basic_info *)req->Buffer, share); + } case FILE_ALLOCATION_INFORMATION: - return set_file_allocation_info(work, fp, buf); + { + if (buf_len < sizeof(struct smb2_file_alloc_info)) + return -EINVAL; + return set_file_allocation_info(work, fp, + (struct smb2_file_alloc_info *)req->Buffer); + } case FILE_END_OF_FILE_INFORMATION: - return set_end_of_file_info(work, fp, buf); + { + if (buf_len < sizeof(struct smb2_file_eof_info)) + return -EINVAL; + return set_end_of_file_info(work, fp, + (struct smb2_file_eof_info *)req->Buffer); + } case FILE_RENAME_INFORMATION: + { if (!test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE)) { ksmbd_debug(SMB, "User does not have write permission\n"); return -EACCES; } - return set_rename_info(work, fp, buf); + if (buf_len < sizeof(struct smb2_file_rename_info)) + return -EINVAL; + + return set_rename_info(work, fp, + (struct smb2_file_rename_info *)req->Buffer, + buf_len); + } case FILE_LINK_INFORMATION: + { + if (buf_len < sizeof(struct smb2_file_link_info)) + return -EINVAL; + return smb2_create_link(work, work->tcon->share_conf, - (struct smb2_file_link_info *)buf, fp->filp, + (struct smb2_file_link_info *)req->Buffer, + buf_len, fp->filp, work->sess->conn->local_nls); - + } case FILE_DISPOSITION_INFORMATION: + { if (!test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE)) { ksmbd_debug(SMB, "User does not have write permission\n"); return -EACCES; } - return set_file_disposition_info(fp, buf); + if (buf_len < sizeof(struct smb2_file_disposition_info)) + return -EINVAL; + + return set_file_disposition_info(fp, + (struct smb2_file_disposition_info *)req->Buffer); + } case FILE_FULL_EA_INFORMATION: { if (!(fp->daccess & FILE_WRITE_EA_LE)) { @@ -5752,18 +5807,29 @@ static int smb2_set_info_file(struct ksmbd_work *work, struct ksmbd_file *fp, return -EACCES; } - return smb2_set_ea((struct smb2_ea_info *)buf, - &fp->filp->f_path); - } + if (buf_len < sizeof(struct smb2_ea_info)) + return -EINVAL; + return smb2_set_ea((struct smb2_ea_info *)req->Buffer, + buf_len, &fp->filp->f_path); + } case FILE_POSITION_INFORMATION: - return set_file_position_info(fp, buf); + { + if (buf_len < sizeof(struct smb2_file_pos_info)) + return -EINVAL; + return set_file_position_info(fp, (struct smb2_file_pos_info *)req->Buffer); + } case FILE_MODE_INFORMATION: - return set_file_mode_info(fp, buf); + { + if (buf_len < sizeof(struct smb2_file_mode_info)) + return -EINVAL; + + return set_file_mode_info(fp, (struct smb2_file_mode_info *)req->Buffer); + } } - pr_err("Unimplemented Fileinfoclass :%d\n", info_class); + pr_err("Unimplemented Fileinfoclass :%d\n", req->FileInfoClass); return -EOPNOTSUPP; } @@ -5824,8 +5890,7 @@ int smb2_set_info(struct ksmbd_work *work) switch (req->InfoType) { case SMB2_O_INFO_FILE: ksmbd_debug(SMB, "GOT SMB2_O_INFO_FILE\n"); - rc = smb2_set_info_file(work, fp, req->FileInfoClass, - req->Buffer, work->tcon->share_conf); + rc = smb2_set_info_file(work, fp, req, work->tcon->share_conf); break; case SMB2_O_INFO_SECURITY: ksmbd_debug(SMB, "GOT SMB2_O_INFO_SECURITY\n"); -- cgit v1.2.3 From 442ff9ebeb0129e90483356f3d79c732e632a7a6 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:44:32 +0900 Subject: ksmbd: add validation in smb2 negotiate MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch add validation to check request buffer check in smb2 negotiate and fix null pointer deferencing oops in smb3_preauth_hash_rsp() that found from manual test. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Hyunchul Lee Cc: Sergey Senozhatsky Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 42 +++++++++++++++++++++++++++++++++++++++++- fs/ksmbd/smb_common.c | 32 +++++++++++++++++++++++++++----- 2 files changed, 68 insertions(+), 6 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 0d915554f532..40882fd47feb 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -1067,6 +1067,7 @@ int smb2_handle_negotiate(struct ksmbd_work *work) struct smb2_negotiate_req *req = work->request_buf; struct smb2_negotiate_rsp *rsp = work->response_buf; int rc = 0; + unsigned int smb2_buf_len, smb2_neg_size; __le32 status; ksmbd_debug(SMB, "Received negotiate request\n"); @@ -1084,6 +1085,44 @@ int smb2_handle_negotiate(struct ksmbd_work *work) goto err_out; } + smb2_buf_len = get_rfc1002_len(work->request_buf); + smb2_neg_size = offsetof(struct smb2_negotiate_req, Dialects) - 4; + if (smb2_neg_size > smb2_buf_len) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (conn->dialect == SMB311_PROT_ID) { + unsigned int nego_ctxt_off = le32_to_cpu(req->NegotiateContextOffset); + + if (smb2_buf_len < nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (smb2_neg_size > nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + } else { + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + smb2_buf_len) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + } + conn->cli_cap = le32_to_cpu(req->Capabilities); switch (conn->dialect) { case SMB311_PROT_ID: @@ -8244,7 +8283,8 @@ void smb3_preauth_hash_rsp(struct ksmbd_work *work) WORK_BUFFERS(work, req, rsp); - if (le16_to_cpu(req->Command) == SMB2_NEGOTIATE_HE) + if (le16_to_cpu(req->Command) == SMB2_NEGOTIATE_HE && + conn->preauth_info) ksmbd_gen_preauth_integrity_hash(conn, (char *)rsp, conn->preauth_info->Preauth_HashValue); diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 5901b2884c60..db8042a173d0 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -169,10 +169,12 @@ static bool supported_protocol(int idx) idx <= server_conf.max_protocol); } -static char *next_dialect(char *dialect, int *next_off) +static char *next_dialect(char *dialect, int *next_off, int bcount) { dialect = dialect + *next_off; - *next_off = strlen(dialect); + *next_off = strnlen(dialect, bcount); + if (dialect[*next_off] != '\0') + return NULL; return dialect; } @@ -187,7 +189,9 @@ static int ksmbd_lookup_dialect_by_name(char *cli_dialects, __le16 byte_count) dialect = cli_dialects; bcount = le16_to_cpu(byte_count); do { - dialect = next_dialect(dialect, &next); + dialect = next_dialect(dialect, &next, bcount); + if (!dialect) + break; ksmbd_debug(SMB, "client requested dialect %s\n", dialect); if (!strcmp(dialect, smb1_protos[i].name)) { @@ -235,13 +239,22 @@ int ksmbd_lookup_dialect_by_id(__le16 *cli_dialects, __le16 dialects_count) static int ksmbd_negotiate_smb_dialect(void *buf) { - __le32 proto; + int smb_buf_length = get_rfc1002_len(buf); + __le32 proto = ((struct smb2_hdr *)buf)->ProtocolId; - proto = ((struct smb2_hdr *)buf)->ProtocolId; if (proto == SMB2_PROTO_NUMBER) { struct smb2_negotiate_req *req; + int smb2_neg_size = + offsetof(struct smb2_negotiate_req, Dialects) - 4; req = (struct smb2_negotiate_req *)buf; + if (smb2_neg_size > smb_buf_length) + goto err_out; + + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + smb_buf_length) + goto err_out; + return ksmbd_lookup_dialect_by_id(req->Dialects, req->DialectCount); } @@ -251,10 +264,19 @@ static int ksmbd_negotiate_smb_dialect(void *buf) struct smb_negotiate_req *req; req = (struct smb_negotiate_req *)buf; + if (le16_to_cpu(req->ByteCount) < 2) + goto err_out; + + if (offsetof(struct smb_negotiate_req, DialectsArray) - 4 + + le16_to_cpu(req->ByteCount) > smb_buf_length) { + goto err_out; + } + return ksmbd_lookup_dialect_by_name(req->DialectsArray, req->ByteCount); } +err_out: return BAD_PROT_ID; } -- cgit v1.2.3 From 8f77150c15f87796570125a43509f9a81a3d9e49 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Fri, 24 Sep 2021 22:22:22 +0900 Subject: ksmbd: add buffer validation for SMB2_CREATE_CONTEXT Add buffer validation for SMB2_CREATE_CONTEXT. Cc: Ronnie Sahlberg Reviewed-by: Ralph Boehme Signed-off-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/oplock.c | 41 +++++++++++++++++++++++++++++++---------- fs/ksmbd/smb2pdu.c | 25 ++++++++++++++++++++++++- fs/ksmbd/smbacl.c | 21 +++++++++++++++++++-- 3 files changed, 74 insertions(+), 13 deletions(-) diff --git a/fs/ksmbd/oplock.c b/fs/ksmbd/oplock.c index 16b6236d1bd2..f9dae6ef2115 100644 --- a/fs/ksmbd/oplock.c +++ b/fs/ksmbd/oplock.c @@ -1451,26 +1451,47 @@ struct lease_ctx_info *parse_lease_state(void *open_req) */ struct create_context *smb2_find_context_vals(void *open_req, const char *tag) { - char *data_offset; struct create_context *cc; unsigned int next = 0; char *name; struct smb2_create_req *req = (struct smb2_create_req *)open_req; + unsigned int remain_len, name_off, name_len, value_off, value_len, + cc_len; - data_offset = (char *)req + 4 + le32_to_cpu(req->CreateContextsOffset); - cc = (struct create_context *)data_offset; + /* + * CreateContextsOffset and CreateContextsLength are guaranteed to + * be valid because of ksmbd_smb2_check_message(). + */ + cc = (struct create_context *)((char *)req + 4 + + le32_to_cpu(req->CreateContextsOffset)); + remain_len = le32_to_cpu(req->CreateContextsLength); do { - int val; - cc = (struct create_context *)((char *)cc + next); - name = le16_to_cpu(cc->NameOffset) + (char *)cc; - val = le16_to_cpu(cc->NameLength); - if (val < 4) + if (remain_len < offsetof(struct create_context, Buffer)) return ERR_PTR(-EINVAL); - if (memcmp(name, tag, val) == 0) - return cc; next = le32_to_cpu(cc->Next); + name_off = le16_to_cpu(cc->NameOffset); + name_len = le16_to_cpu(cc->NameLength); + value_off = le16_to_cpu(cc->DataOffset); + value_len = le32_to_cpu(cc->DataLength); + cc_len = next ? next : remain_len; + + if ((next & 0x7) != 0 || + next > remain_len || + name_off != offsetof(struct create_context, Buffer) || + name_len < 4 || + name_off + name_len > cc_len || + (value_off & 0x7) != 0 || + (value_off && (value_off < name_off + name_len)) || + ((u64)value_off + value_len > cc_len)) + return ERR_PTR(-EINVAL); + + name = (char *)cc + name_off; + if (memcmp(name, tag, name_len) == 0) + return cc; + + remain_len -= next; } while (next != 0); return NULL; diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 40882fd47feb..99c6349a44fa 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2427,6 +2427,10 @@ static int smb2_create_sd_buffer(struct ksmbd_work *work, ksmbd_debug(SMB, "Set ACLs using SMB2_CREATE_SD_BUFFER context\n"); sd_buf = (struct create_sd_buf_req *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_sd_buf_req)) + return -EINVAL; return set_info_sec(work->conn, work->tcon, path, &sd_buf->ntsd, le32_to_cpu(sd_buf->ccontext.DataLength), true); } @@ -2621,6 +2625,12 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } else if (context) { ea_buf = (struct create_ea_buf_req *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_ea_buf_req)) { + rc = -EINVAL; + goto err_out1; + } if (req->CreateOptions & FILE_NO_EA_KNOWLEDGE_LE) { rsp->hdr.Status = STATUS_ACCESS_DENIED; rc = -EACCES; @@ -2659,6 +2669,12 @@ int smb2_open(struct ksmbd_work *work) } else if (context) { struct create_posix *posix = (struct create_posix *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_posix)) { + rc = -EINVAL; + goto err_out1; + } ksmbd_debug(SMB, "get posix context\n"); posix_mode = le32_to_cpu(posix->Mode); @@ -3049,9 +3065,16 @@ int smb2_open(struct ksmbd_work *work) rc = PTR_ERR(az_req); goto err_out; } else if (az_req) { - loff_t alloc_size = le64_to_cpu(az_req->AllocationSize); + loff_t alloc_size; int err; + if (le16_to_cpu(az_req->ccontext.DataOffset) + + le32_to_cpu(az_req->ccontext.DataLength) < + sizeof(struct create_alloc_size_req)) { + rc = -EINVAL; + goto err_out; + } + alloc_size = le64_to_cpu(az_req->AllocationSize); ksmbd_debug(SMB, "request smb2 create allocate size : %llu\n", alloc_size); diff --git a/fs/ksmbd/smbacl.c b/fs/ksmbd/smbacl.c index 0a95cdec8c80..bd792db32623 100644 --- a/fs/ksmbd/smbacl.c +++ b/fs/ksmbd/smbacl.c @@ -380,7 +380,7 @@ static void parse_dacl(struct user_namespace *user_ns, { int i, ret; int num_aces = 0; - int acl_size; + unsigned int acl_size; char *acl_base; struct smb_ace **ppace; struct posix_acl_entry *cf_pace, *cf_pdace; @@ -392,7 +392,7 @@ static void parse_dacl(struct user_namespace *user_ns, return; /* validate that we do not go past end of acl */ - if (end_of_acl <= (char *)pdacl || + if (end_of_acl < (char *)pdacl + sizeof(struct smb_acl) || end_of_acl < (char *)pdacl + le16_to_cpu(pdacl->size)) { pr_err("ACL too small to parse DACL\n"); return; @@ -431,8 +431,22 @@ static void parse_dacl(struct user_namespace *user_ns, * user/group/other have no permissions */ for (i = 0; i < num_aces; ++i) { + if (end_of_acl - acl_base < acl_size) + break; + ppace[i] = (struct smb_ace *)(acl_base + acl_size); acl_base = (char *)ppace[i]; + acl_size = offsetof(struct smb_ace, sid) + + offsetof(struct smb_sid, sub_auth); + + if (end_of_acl - acl_base < acl_size || + ppace[i]->sid.num_subauth > SID_MAX_SUB_AUTHORITIES || + (end_of_acl - acl_base < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth) || + (le16_to_cpu(ppace[i]->size) < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth)) + break; + acl_size = le16_to_cpu(ppace[i]->size); ppace[i]->access_req = smb_map_generic_desired_access(ppace[i]->access_req); @@ -807,6 +821,9 @@ int parse_sec_desc(struct user_namespace *user_ns, struct smb_ntsd *pntsd, if (!pntsd) return -EIO; + if (acl_len < sizeof(struct smb_ntsd)) + return -EINVAL; + owner_sid_ptr = (struct smb_sid *)((char *)pntsd + le32_to_cpu(pntsd->osidoffset)); group_sid_ptr = (struct smb_sid *)((char *)pntsd + -- cgit v1.2.3 From 4227f811cdeb4d85db91ea6b9adf9ac049cec12e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 19:52:51 +0900 Subject: ksmbd: fix transform header validation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Validate that the transform and smb request headers are present before checking OriginalMessageSize and SessionId fields. Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Sergey Senozhatsky Reviewed-by: Tom Talpey Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 99c6349a44fa..dcf907738610 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -8414,16 +8414,8 @@ int smb3_decrypt_req(struct ksmbd_work *work) unsigned int buf_data_size = pdu_length + 4 - sizeof(struct smb2_transform_hdr); struct smb2_transform_hdr *tr_hdr = (struct smb2_transform_hdr *)buf; - unsigned int orig_len = le32_to_cpu(tr_hdr->OriginalMessageSize); int rc = 0; - sess = ksmbd_session_lookup_all(conn, le64_to_cpu(tr_hdr->SessionId)); - if (!sess) { - pr_err("invalid session id(%llx) in transform header\n", - le64_to_cpu(tr_hdr->SessionId)); - return -ECONNABORTED; - } - if (pdu_length + 4 < sizeof(struct smb2_transform_hdr) + sizeof(struct smb2_hdr)) { pr_err("Transform message is too small (%u)\n", @@ -8431,11 +8423,19 @@ int smb3_decrypt_req(struct ksmbd_work *work) return -ECONNABORTED; } - if (pdu_length + 4 < orig_len + sizeof(struct smb2_transform_hdr)) { + if (pdu_length + 4 < + le32_to_cpu(tr_hdr->OriginalMessageSize) + sizeof(struct smb2_transform_hdr)) { pr_err("Transform message is broken\n"); return -ECONNABORTED; } + sess = ksmbd_session_lookup_all(conn, le64_to_cpu(tr_hdr->SessionId)); + if (!sess) { + pr_err("invalid session id(%llx) in transform header\n", + le64_to_cpu(tr_hdr->SessionId)); + return -ECONNABORTED; + } + iov[0].iov_base = buf; iov[0].iov_len = sizeof(struct smb2_transform_hdr); iov[1].iov_base = buf + sizeof(struct smb2_transform_hdr); -- cgit v1.2.3 From 1d625050c7c2dd877e108e382b8aaf1ae3cfe1f4 Mon Sep 17 00:00:00 2001 From: Patrick Ho Date: Sat, 21 Aug 2021 02:56:26 -0400 Subject: nfsd: fix error handling of register_pernet_subsys() in init_nfsd() init_nfsd() should not unregister pernet subsys if the register fails but should instead unwind from the last successful operation which is register_filesystem(). Unregistering a failed register_pernet_subsys() call can result in a kernel GPF as revealed by programmatically injecting an error in register_pernet_subsys(). Verified the fix handled failure gracefully with no lingering nfsd entry in /proc/filesystems. This change was introduced by the commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first"), the original error handling logic was correct. Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Cc: stable@vger.kernel.org Signed-off-by: Patrick Ho Acked-by: J. Bruce Fields Signed-off-by: Chuck Lever --- fs/nfsd/nfsctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index c2c3d9077dc5..09ae1a0873d0 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1545,7 +1545,7 @@ static int __init init_nfsd(void) goto out_free_all; return 0; out_free_all: - unregister_pernet_subsys(&nfsd_net_ops); + unregister_filesystem(&nfsd_fs_type); out_free_exports: remove_proc_entry("fs/nfs/exports", NULL); remove_proc_entry("fs/nfs", NULL); -- cgit v1.2.3 From 09f7c338da7818fd33af401d855b895550e7c170 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 28 Sep 2021 19:19:17 +0300 Subject: fs/ntfs3: Reject mount if boot's cluster size < media sector size If we continue to work in this case, then we can corrupt fs. Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block"). Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 800897777eb0..e9b6a3734576 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -763,9 +763,20 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, sbi->mft.lbo = mlcn << sbi->cluster_bits; sbi->mft.lbo2 = mlcn2 << sbi->cluster_bits; - if (sbi->cluster_size < sbi->sector_size) + /* Compare boot's cluster and sector. */ + if (sbi->cluster_size < boot_sector_size) goto out; + /* Compare boot's cluster and media sector. */ + if (sbi->cluster_size < sector_size) { + /* No way to use ntfs_get_block in this case. */ + ntfs_err( + sb, + "Failed to mount 'cause NTFS's cluster size (%u) is less than media sector size (%u)", + sbi->cluster_size, sector_size); + goto out; + } + sbi->cluster_mask = sbi->cluster_size - 1; sbi->cluster_mask_inv = ~(u64)sbi->cluster_mask; sbi->record_size = record_size = boot->record_size < 0 -- cgit v1.2.3 From dbf59e2a33d2cb5ae0534523fd3d6d8bda808be8 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 28 Sep 2021 19:19:49 +0300 Subject: fs/ntfs3: Refactoring of ntfs_init_from_boot Remove ntfs_sb_info members sector_size and sector_bits. Print details why mount failed. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/ntfs_fs.h | 2 -- fs/ntfs3/super.c | 19 +++++++++---------- 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 6731b5d9e2d8..38b7c1a9dc52 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -211,10 +211,8 @@ struct ntfs_sb_info { u32 blocks_per_cluster; // cluster_size / sb->s_blocksize u32 record_size; - u32 sector_size; u32 index_size; - u8 sector_bits; u8 cluster_bits; u8 record_bits; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index e9b6a3734576..705d8b4f4894 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -682,7 +682,7 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, struct ntfs_sb_info *sbi = sb->s_fs_info; int err; u32 mb, gb, boot_sector_size, sct_per_clst, record_size; - u64 sectors, clusters, fs_size, mlcn, mlcn2; + u64 sectors, clusters, mlcn, mlcn2; struct NTFS_BOOT *boot; struct buffer_head *bh; struct MFT_REC *rec; @@ -740,20 +740,20 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, goto out; } - sbi->sector_size = boot_sector_size; - sbi->sector_bits = blksize_bits(boot_sector_size); - fs_size = (sectors + 1) << sbi->sector_bits; + sbi->volume.size = sectors * boot_sector_size; - gb = format_size_gb(fs_size, &mb); + gb = format_size_gb(sbi->volume.size + boot_sector_size, &mb); /* * - Volume formatted and mounted with the same sector size. * - Volume formatted 4K and mounted as 512. * - Volume formatted 512 and mounted as 4K. */ - if (sbi->sector_size != sector_size) { - ntfs_warn(sb, - "Different NTFS' sector size and media sector size"); + if (boot_sector_size != sector_size) { + ntfs_warn( + sb, + "Different NTFS' sector size (%u) and media sector size (%u)", + boot_sector_size, sector_size); dev_size += sector_size - 1; } @@ -800,10 +800,9 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, : (u32)boot->index_size << sbi->cluster_bits; sbi->volume.ser_num = le64_to_cpu(boot->serial_num); - sbi->volume.size = sectors << sbi->sector_bits; /* Warning if RAW volume. */ - if (dev_size < fs_size) { + if (dev_size < sbi->volume.size + boot_sector_size) { u32 mb0, gb0; gb0 = format_size_gb(dev_size, &mb0); -- cgit v1.2.3 From 35afb70dcfe4eb445060dd955e5b67d962869ce5 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Wed, 29 Sep 2021 19:29:52 +0300 Subject: fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect This can be reason for reported panic https://lore.kernel.org/ntfs3/f9de5807-2311-7374-afb0-bc5dffb522c0@gmail.com/ Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation") Reported-by: Mohammad Rasim Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 9a53f809576d..007602badd90 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -3080,7 +3080,9 @@ static bool ni_update_parent(struct ntfs_inode *ni, struct NTFS_DUP_INFO *dup, const struct EA_INFO *info; info = resident_data_ex(attr, sizeof(struct EA_INFO)); - dup->ea_size = info->size_pack; + /* If ATTR_EA_INFO exists 'info' can't be NULL. */ + if (info) + dup->ea_size = info->size_pack; } } -- cgit v1.2.3 From f2e717d655040d632c9015f19aa4275f8b16e7f2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 30 Sep 2021 15:44:41 -0400 Subject: nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero RFC3530 notes that the 'dircount' field may be zero, in which case the recommendation is to ignore it, and only enforce the 'maxcount' field. In RFC5661, this recommendation to ignore a zero valued field becomes a requirement. Fixes: aee377644146 ("nfsd4: fix rd_dircount enforcement") Cc: Signed-off-by: Trond Myklebust Signed-off-by: Chuck Lever --- fs/nfsd/nfs4xdr.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 7abeccb975b2..cf030ebe2827 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -3544,15 +3544,18 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen, goto fail; cd->rd_maxcount -= entry_bytes; /* - * RFC 3530 14.2.24 describes rd_dircount as only a "hint", so - * let's always let through the first entry, at least: + * RFC 3530 14.2.24 describes rd_dircount as only a "hint", and + * notes that it could be zero. If it is zero, then the server + * should enforce only the rd_maxcount value. */ - if (!cd->rd_dircount) - goto fail; - name_and_cookie = 4 + 4 * XDR_QUADLEN(namlen) + 8; - if (name_and_cookie > cd->rd_dircount && cd->cookie_offset) - goto fail; - cd->rd_dircount -= min(cd->rd_dircount, name_and_cookie); + if (cd->rd_dircount) { + name_and_cookie = 4 + 4 * XDR_QUADLEN(namlen) + 8; + if (name_and_cookie > cd->rd_dircount && cd->cookie_offset) + goto fail; + cd->rd_dircount -= min(cd->rd_dircount, name_and_cookie); + if (!cd->rd_dircount) + cd->rd_maxcount = 0; + } cd->cookie_offset = cookie_offset; skip_entry: -- cgit v1.2.3 From f9a10440f0b1f33faa792af26f4e9823a9b8b6a4 Mon Sep 17 00:00:00 2001 From: Raed Salem Date: Thu, 26 Aug 2021 17:07:17 +0300 Subject: net/mlx5e: IPSEC RX, enable checksum complete Currently in Rx data path IPsec crypto offloaded packets uses csum_none flag, so checksum is handled by the stack, this naturally have some performance/cpu utilization impact on such flows. As Nvidia NIC starting from ConnectX6DX provides checksum complete value out of the box also for such flows there is no sense in taking csum_none path, furthermore the stack (xfrm) have the method to handle checksum complete corrections for such flows i.e. IPsec trailer removal and consequently checksum value adjustment. Because of the above and in addition the ConnectX6DX is the first HW which supports IPsec crypto offload then it is safe to report csum complete for IPsec offloaded traffic. Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by: Raed Salem Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 3c65fd0bcf31..29a6586ef28d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -1001,14 +1001,9 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, goto csum_unnecessary; if (likely(is_last_ethertype_ip(skb, &network_depth, &proto))) { - u8 ipproto = get_ip_proto(skb, network_depth, proto); - - if (unlikely(ipproto == IPPROTO_SCTP)) + if (unlikely(get_ip_proto(skb, network_depth, proto) == IPPROTO_SCTP)) goto csum_unnecessary; - if (unlikely(mlx5_ipsec_is_rx_flow(cqe))) - goto csum_none; - stats->csum_complete++; skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = csum_unfold((__force __sum16)cqe->check_sum); -- cgit v1.2.3 From 9d758d4a3a039b9d7086d4759ed255b748713eee Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 2 Sep 2021 10:33:32 +0300 Subject: net/mlx5e: Keep the value for maximum number of channels in-sync The value for maximum number of channels is first calculated based on the netdev's profile and current function resources (specifically, number of MSIX vectors, which depends among other things on the number of online cores in the system). This value is then used to calculate the netdev's number of rxqs/txqs. Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs is constant and we must not exceed it. To achieve this, keep the maximum number of channels in sync upon any netdevice re-attach. Use mlx5e_get_max_num_channels() for calculating the number of netdev's rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which coinsiders core device resources, profile, and netdev) to init or update priv->max_nch. Before this patch, the value of priv->max_nch might get out of sync, mistakenly allowing accesses to out-of-bounds objects, which would crash the system. Track the number of channels stats structures used in a separate field, as they are persistent to suspend/resume operations. All the collected stats of every channel index that ever existed should be preserved. They are reset only when struct mlx5e_priv is, in mlx5e_priv_cleanup(), which is part of the profile changing flow. There is no point anymore in blocking a profile change due to max_nch mismatch in mlx5e_netdev_change_profile(). Remove the limitation. Fixes: a1f240f18017 ("net/mlx5e: Adjust to max number of channles when re-attaching") Signed-off-by: Tariq Toukan Reviewed-by: Aya Levin Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 11 ++-- .../ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c | 6 +-- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 59 ++++++++++++++++------ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 3 +- drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 8 +-- .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 4 +- 6 files changed, 57 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 7b8c8187543a..2dca9219ca71 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -845,6 +845,7 @@ struct mlx5e_priv { struct mlx5e_channel_stats channel_stats[MLX5E_MAX_NUM_CHANNELS]; struct mlx5e_channel_stats trap_stats; struct mlx5e_ptp_stats ptp_stats; + u16 stats_nch; u16 max_nch; u8 max_opened_tc; bool tx_ptp_opened; @@ -1100,12 +1101,6 @@ int mlx5e_ethtool_set_pauseparam(struct mlx5e_priv *priv, struct ethtool_pauseparam *pauseparam); /* mlx5e generic netdev management API */ -static inline unsigned int -mlx5e_calc_max_nch(struct mlx5e_priv *priv, const struct mlx5e_profile *profile) -{ - return priv->netdev->num_rx_queues / max_t(u8, profile->rq_groups, 1); -} - static inline bool mlx5e_tx_mpwqe_supported(struct mlx5_core_dev *mdev) { @@ -1114,11 +1109,13 @@ mlx5e_tx_mpwqe_supported(struct mlx5_core_dev *mdev) } int mlx5e_priv_init(struct mlx5e_priv *priv, + const struct mlx5e_profile *profile, struct net_device *netdev, struct mlx5_core_dev *mdev); void mlx5e_priv_cleanup(struct mlx5e_priv *priv); struct net_device * -mlx5e_create_netdev(struct mlx5_core_dev *mdev, unsigned int txqs, unsigned int rxqs); +mlx5e_create_netdev(struct mlx5_core_dev *mdev, const struct mlx5e_profile *profile, + unsigned int txqs, unsigned int rxqs); int mlx5e_attach_netdev(struct mlx5e_priv *priv); void mlx5e_detach_netdev(struct mlx5e_priv *priv); void mlx5e_destroy_netdev(struct mlx5e_priv *priv); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c index ac44bbe95c5c..d290d7276b8d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c @@ -35,7 +35,7 @@ static void mlx5e_hv_vhca_fill_stats(struct mlx5e_priv *priv, void *data, { int ch, i = 0; - for (ch = 0; ch < priv->max_nch; ch++) { + for (ch = 0; ch < priv->stats_nch; ch++) { void *buf = data + i; if (WARN_ON_ONCE(buf + @@ -51,7 +51,7 @@ static void mlx5e_hv_vhca_fill_stats(struct mlx5e_priv *priv, void *data, static int mlx5e_hv_vhca_stats_buf_size(struct mlx5e_priv *priv) { return (sizeof(struct mlx5e_hv_vhca_per_ring_stats) * - priv->max_nch); + priv->stats_nch); } static void mlx5e_hv_vhca_stats_work(struct work_struct *work) @@ -100,7 +100,7 @@ static void mlx5e_hv_vhca_stats_control(struct mlx5_hv_vhca_agent *agent, sagent = &priv->stats_agent; block->version = MLX5_HV_VHCA_STATS_VERSION; - block->rings = priv->max_nch; + block->rings = priv->stats_nch; if (!block->command) { cancel_delayed_work_sync(&priv->stats_agent.work); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 3fd515e7bf30..774ce88d80cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3065,7 +3065,7 @@ void mlx5e_fold_sw_stats64(struct mlx5e_priv *priv, struct rtnl_link_stats64 *s) { int i; - for (i = 0; i < priv->max_nch; i++) { + for (i = 0; i < priv->stats_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; struct mlx5e_rq_stats *xskrq_stats = &channel_stats->xskrq; struct mlx5e_rq_stats *rq_stats = &channel_stats->rq; @@ -4186,8 +4186,6 @@ void mlx5e_build_nic_params(struct mlx5e_priv *priv, struct mlx5e_xsk *xsk, u16 struct mlx5_core_dev *mdev = priv->mdev; u8 rx_cq_period_mode; - priv->max_nch = mlx5e_calc_max_nch(priv, priv->profile); - params->sw_mtu = mtu; params->hard_mtu = MLX5E_ETH_HARD_MTU; params->num_channels = min_t(unsigned int, MLX5E_MAX_NUM_CHANNELS / 2, @@ -4682,8 +4680,35 @@ static const struct mlx5e_profile mlx5e_nic_profile = { .rx_ptp_support = true, }; +static unsigned int +mlx5e_calc_max_nch(struct mlx5_core_dev *mdev, struct net_device *netdev, + const struct mlx5e_profile *profile) + +{ + unsigned int max_nch, tmp; + + /* core resources */ + max_nch = mlx5e_get_max_num_channels(mdev); + + /* netdev rx queues */ + tmp = netdev->num_rx_queues / max_t(u8, profile->rq_groups, 1); + max_nch = min_t(unsigned int, max_nch, tmp); + + /* netdev tx queues */ + tmp = netdev->num_tx_queues; + if (mlx5_qos_is_supported(mdev)) + tmp -= mlx5e_qos_max_leaf_nodes(mdev); + if (MLX5_CAP_GEN(mdev, ts_cqe_to_dest_cqn)) + tmp -= profile->max_tc; + tmp = tmp / profile->max_tc; + max_nch = min_t(unsigned int, max_nch, tmp); + + return max_nch; +} + /* mlx5e generic netdev management API (move to en_common.c) */ int mlx5e_priv_init(struct mlx5e_priv *priv, + const struct mlx5e_profile *profile, struct net_device *netdev, struct mlx5_core_dev *mdev) { @@ -4691,6 +4716,8 @@ int mlx5e_priv_init(struct mlx5e_priv *priv, priv->mdev = mdev; priv->netdev = netdev; priv->msglevel = MLX5E_MSG_LEVEL; + priv->max_nch = mlx5e_calc_max_nch(mdev, netdev, profile); + priv->stats_nch = priv->max_nch; priv->max_opened_tc = 1; if (!alloc_cpumask_var(&priv->scratchpad.cpumask, GFP_KERNEL)) @@ -4734,7 +4761,8 @@ void mlx5e_priv_cleanup(struct mlx5e_priv *priv) } struct net_device * -mlx5e_create_netdev(struct mlx5_core_dev *mdev, unsigned int txqs, unsigned int rxqs) +mlx5e_create_netdev(struct mlx5_core_dev *mdev, const struct mlx5e_profile *profile, + unsigned int txqs, unsigned int rxqs) { struct net_device *netdev; int err; @@ -4745,7 +4773,7 @@ mlx5e_create_netdev(struct mlx5_core_dev *mdev, unsigned int txqs, unsigned int return NULL; } - err = mlx5e_priv_init(netdev_priv(netdev), netdev, mdev); + err = mlx5e_priv_init(netdev_priv(netdev), profile, netdev, mdev); if (err) { mlx5_core_err(mdev, "mlx5e_priv_init failed, err=%d\n", err); goto err_free_netdev; @@ -4787,7 +4815,7 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv) clear_bit(MLX5E_STATE_DESTROYING, &priv->state); /* max number of channels may have changed */ - max_nch = mlx5e_get_max_num_channels(priv->mdev); + max_nch = mlx5e_calc_max_nch(priv->mdev, priv->netdev, profile); if (priv->channels.params.num_channels > max_nch) { mlx5_core_warn(priv->mdev, "MLX5E: Reducing number of channels to %d\n", max_nch); /* Reducing the number of channels - RXFH has to be reset, and @@ -4796,6 +4824,13 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv) priv->netdev->priv_flags &= ~IFF_RXFH_CONFIGURED; priv->channels.params.num_channels = max_nch; } + if (max_nch != priv->max_nch) { + mlx5_core_warn(priv->mdev, + "MLX5E: Updating max number of channels from %u to %u\n", + priv->max_nch, max_nch); + priv->max_nch = max_nch; + } + /* 1. Set the real number of queues in the kernel the first time. * 2. Set our default XPS cpumask. * 3. Build the RQT. @@ -4860,7 +4895,7 @@ mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mde struct mlx5e_priv *priv = netdev_priv(netdev); int err; - err = mlx5e_priv_init(priv, netdev, mdev); + err = mlx5e_priv_init(priv, new_profile, netdev, mdev); if (err) { mlx5_core_err(mdev, "mlx5e_priv_init failed, err=%d\n", err); return err; @@ -4886,20 +4921,12 @@ priv_cleanup: int mlx5e_netdev_change_profile(struct mlx5e_priv *priv, const struct mlx5e_profile *new_profile, void *new_ppriv) { - unsigned int new_max_nch = mlx5e_calc_max_nch(priv, new_profile); const struct mlx5e_profile *orig_profile = priv->profile; struct net_device *netdev = priv->netdev; struct mlx5_core_dev *mdev = priv->mdev; void *orig_ppriv = priv->ppriv; int err, rollback_err; - /* sanity */ - if (new_max_nch != priv->max_nch) { - netdev_warn(netdev, "%s: Replacing profile with different max channels\n", - __func__); - return -EINVAL; - } - /* cleanup old profile */ mlx5e_detach_netdev(priv); priv->profile->cleanup(priv); @@ -4995,7 +5022,7 @@ static int mlx5e_probe(struct auxiliary_device *adev, nch = mlx5e_get_max_num_channels(mdev); txqs = nch * profile->max_tc + ptp_txqs + qos_sqs; rxqs = nch * profile->rq_groups; - netdev = mlx5e_create_netdev(mdev, txqs, rxqs); + netdev = mlx5e_create_netdev(mdev, profile, txqs, rxqs); if (!netdev) { mlx5_core_err(mdev, "mlx5e_create_netdev failed\n"); return -ENOMEM; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index ae71a17fdb27..3dd1101cc693 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -596,7 +596,6 @@ static void mlx5e_build_rep_params(struct net_device *netdev) MLX5_CQ_PERIOD_MODE_START_FROM_CQE : MLX5_CQ_PERIOD_MODE_START_FROM_EQE; - priv->max_nch = mlx5e_calc_max_nch(priv, priv->profile); params = &priv->channels.params; params->num_channels = MLX5E_REP_PARAMS_DEF_NUM_CHANNELS; @@ -1169,7 +1168,7 @@ mlx5e_vport_vf_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep) nch = mlx5e_get_max_num_channels(dev); txqs = nch * profile->max_tc; rxqs = nch * profile->rq_groups; - netdev = mlx5e_create_netdev(dev, txqs, rxqs); + netdev = mlx5e_create_netdev(dev, profile, txqs, rxqs); if (!netdev) { mlx5_core_warn(dev, "Failed to create representor netdev for vport %d\n", diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index e4f5b6395148..46bf78169f63 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -450,7 +450,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(sw) memset(s, 0, sizeof(*s)); - for (i = 0; i < priv->max_nch; i++) { + for (i = 0; i < priv->stats_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; int j; @@ -2119,7 +2119,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(ptp) { return; } static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(channels) { - int max_nch = priv->max_nch; + int max_nch = priv->stats_nch; return (NUM_RQ_STATS * max_nch) + (NUM_CH_STATS * max_nch) + @@ -2133,7 +2133,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(channels) static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(channels) { bool is_xsk = priv->xsk.ever_used; - int max_nch = priv->max_nch; + int max_nch = priv->stats_nch; int i, j, tc; for (i = 0; i < max_nch; i++) @@ -2175,7 +2175,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(channels) static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(channels) { bool is_xsk = priv->xsk.ever_used; - int max_nch = priv->max_nch; + int max_nch = priv->stats_nch; int i, j, tc; for (i = 0; i < max_nch; i++) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 67571e5040d6..269ebb53eda6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -113,7 +113,7 @@ static void mlx5i_grp_sw_update_stats(struct mlx5e_priv *priv) struct mlx5e_sw_stats s = { 0 }; int i, j; - for (i = 0; i < priv->max_nch; i++) { + for (i = 0; i < priv->stats_nch; i++) { struct mlx5e_channel_stats *channel_stats; struct mlx5e_rq_stats *rq_stats; @@ -711,7 +711,7 @@ static int mlx5_rdma_setup_rn(struct ib_device *ibdev, u32 port_num, goto destroy_ht; } - err = mlx5e_priv_init(epriv, netdev, mdev); + err = mlx5e_priv_init(epriv, prof, netdev, mdev); if (err) goto destroy_mdev_resources; -- cgit v1.2.3 From 7dbc849b2ab3b8ea8f767361c46f914bb2b7779d Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Wed, 29 Sep 2021 15:51:26 +0300 Subject: net/mlx5e: Improve MQPRIO resiliency * Add netdev->tc_to_txq rollback in case of failure in mlx5e_update_netdev_queues(). * Fix broken transition between the two modes: MQPRIO DCB mode with tc==8, and MQPRIO channel mode. * Disable MQPRIO channel mode if re-attaching with a different number of channels. * Improve code sharing. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 111 +++++++++++++++------- 2 files changed, 80 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 2dca9219ca71..03a7a4ce5cd5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -252,6 +252,7 @@ struct mlx5e_params { struct { u16 mode; u8 num_tc; + struct netdev_tc_txq tc_to_txq[TC_MAX_QUEUE]; } mqprio; bool rx_cqe_compress_def; bool tunneled_offload_en; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 774ce88d80cd..0390395f421f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2264,7 +2264,7 @@ void mlx5e_set_netdev_mtu_boundaries(struct mlx5e_priv *priv) } static int mlx5e_netdev_set_tcs(struct net_device *netdev, u16 nch, u8 ntc, - struct tc_mqprio_qopt_offload *mqprio) + struct netdev_tc_txq *tc_to_txq) { int tc, err; @@ -2282,11 +2282,8 @@ static int mlx5e_netdev_set_tcs(struct net_device *netdev, u16 nch, u8 ntc, for (tc = 0; tc < ntc; tc++) { u16 count, offset; - /* For DCB mode, map netdev TCs to offset 0 - * We have our own UP to TXQ mapping for QoS - */ - count = mqprio ? mqprio->qopt.count[tc] : nch; - offset = mqprio ? mqprio->qopt.offset[tc] : 0; + count = tc_to_txq[tc].count; + offset = tc_to_txq[tc].offset; netdev_set_tc_queue(netdev, tc, count, offset); } @@ -2315,19 +2312,24 @@ int mlx5e_update_tx_netdev_queues(struct mlx5e_priv *priv) static int mlx5e_update_netdev_queues(struct mlx5e_priv *priv) { + struct netdev_tc_txq old_tc_to_txq[TC_MAX_QUEUE], *tc_to_txq; struct net_device *netdev = priv->netdev; int old_num_txqs, old_ntc; int num_rxqs, nch, ntc; int err; + int i; old_num_txqs = netdev->real_num_tx_queues; old_ntc = netdev->num_tc ? : 1; + for (i = 0; i < ARRAY_SIZE(old_tc_to_txq); i++) + old_tc_to_txq[i] = netdev->tc_to_txq[i]; nch = priv->channels.params.num_channels; - ntc = mlx5e_get_dcb_num_tc(&priv->channels.params); + ntc = priv->channels.params.mqprio.num_tc; num_rxqs = nch * priv->profile->rq_groups; + tc_to_txq = priv->channels.params.mqprio.tc_to_txq; - err = mlx5e_netdev_set_tcs(netdev, nch, ntc, NULL); + err = mlx5e_netdev_set_tcs(netdev, nch, ntc, tc_to_txq); if (err) goto err_out; err = mlx5e_update_tx_netdev_queues(priv); @@ -2350,11 +2352,14 @@ err_txqs: WARN_ON_ONCE(netif_set_real_num_tx_queues(netdev, old_num_txqs)); err_tcs: - mlx5e_netdev_set_tcs(netdev, old_num_txqs / old_ntc, old_ntc, NULL); + WARN_ON_ONCE(mlx5e_netdev_set_tcs(netdev, old_num_txqs / old_ntc, old_ntc, + old_tc_to_txq)); err_out: return err; } +static MLX5E_DEFINE_PREACTIVATE_WRAPPER_CTX(mlx5e_update_netdev_queues); + static void mlx5e_set_default_xps_cpumasks(struct mlx5e_priv *priv, struct mlx5e_params *params) { @@ -2861,6 +2866,58 @@ static int mlx5e_modify_channels_vsd(struct mlx5e_channels *chs, bool vsd) return 0; } +static void mlx5e_mqprio_build_default_tc_to_txq(struct netdev_tc_txq *tc_to_txq, + int ntc, int nch) +{ + int tc; + + memset(tc_to_txq, 0, sizeof(*tc_to_txq) * TC_MAX_QUEUE); + + /* Map netdev TCs to offset 0. + * We have our own UP to TXQ mapping for DCB mode of QoS + */ + for (tc = 0; tc < ntc; tc++) { + tc_to_txq[tc] = (struct netdev_tc_txq) { + .count = nch, + .offset = 0, + }; + } +} + +static void mlx5e_mqprio_build_tc_to_txq(struct netdev_tc_txq *tc_to_txq, + struct tc_mqprio_qopt *qopt) +{ + int tc; + + for (tc = 0; tc < TC_MAX_QUEUE; tc++) { + tc_to_txq[tc] = (struct netdev_tc_txq) { + .count = qopt->count[tc], + .offset = qopt->offset[tc], + }; + } +} + +static void mlx5e_params_mqprio_dcb_set(struct mlx5e_params *params, u8 num_tc) +{ + params->mqprio.mode = TC_MQPRIO_MODE_DCB; + params->mqprio.num_tc = num_tc; + mlx5e_mqprio_build_default_tc_to_txq(params->mqprio.tc_to_txq, num_tc, + params->num_channels); +} + +static void mlx5e_params_mqprio_channel_set(struct mlx5e_params *params, + struct tc_mqprio_qopt *qopt) +{ + params->mqprio.mode = TC_MQPRIO_MODE_CHANNEL; + params->mqprio.num_tc = qopt->num_tc; + mlx5e_mqprio_build_tc_to_txq(params->mqprio.tc_to_txq, qopt); +} + +static void mlx5e_params_mqprio_reset(struct mlx5e_params *params) +{ + mlx5e_params_mqprio_dcb_set(params, 1); +} + static int mlx5e_setup_tc_mqprio_dcb(struct mlx5e_priv *priv, struct tc_mqprio_qopt *mqprio) { @@ -2874,8 +2931,7 @@ static int mlx5e_setup_tc_mqprio_dcb(struct mlx5e_priv *priv, return -EINVAL; new_params = priv->channels.params; - new_params.mqprio.mode = TC_MQPRIO_MODE_DCB; - new_params.mqprio.num_tc = tc ? tc : 1; + mlx5e_params_mqprio_dcb_set(&new_params, tc ? tc : 1); err = mlx5e_safe_switch_params(priv, &new_params, mlx5e_num_channels_changed_ctx, NULL, true); @@ -2926,25 +2982,12 @@ static int mlx5e_mqprio_channel_validate(struct mlx5e_priv *priv, return 0; } -static int mlx5e_mqprio_channel_set_tcs_ctx(struct mlx5e_priv *priv, void *ctx) -{ - struct tc_mqprio_qopt_offload *mqprio = (struct tc_mqprio_qopt_offload *)ctx; - struct net_device *netdev = priv->netdev; - u8 num_tc; - - if (priv->channels.params.mqprio.mode != TC_MQPRIO_MODE_CHANNEL) - return -EINVAL; - - num_tc = priv->channels.params.mqprio.num_tc; - mlx5e_netdev_set_tcs(netdev, 0, num_tc, mqprio); - - return 0; -} - static int mlx5e_setup_tc_mqprio_channel(struct mlx5e_priv *priv, struct tc_mqprio_qopt_offload *mqprio) { + mlx5e_fp_preactivate preactivate; struct mlx5e_params new_params; + bool nch_changed; int err; err = mlx5e_mqprio_channel_validate(priv, mqprio); @@ -2952,12 +2995,12 @@ static int mlx5e_setup_tc_mqprio_channel(struct mlx5e_priv *priv, return err; new_params = priv->channels.params; - new_params.mqprio.mode = TC_MQPRIO_MODE_CHANNEL; - new_params.mqprio.num_tc = mqprio->qopt.num_tc; - err = mlx5e_safe_switch_params(priv, &new_params, - mlx5e_mqprio_channel_set_tcs_ctx, mqprio, true); + mlx5e_params_mqprio_channel_set(&new_params, &mqprio->qopt); - return err; + nch_changed = mlx5e_get_dcb_num_tc(&priv->channels.params) > 1; + preactivate = nch_changed ? mlx5e_num_channels_changed_ctx : + mlx5e_update_netdev_queues_ctx; + return mlx5e_safe_switch_params(priv, &new_params, preactivate, NULL, true); } static int mlx5e_setup_tc_mqprio(struct mlx5e_priv *priv, @@ -4190,7 +4233,7 @@ void mlx5e_build_nic_params(struct mlx5e_priv *priv, struct mlx5e_xsk *xsk, u16 params->hard_mtu = MLX5E_ETH_HARD_MTU; params->num_channels = min_t(unsigned int, MLX5E_MAX_NUM_CHANNELS / 2, priv->max_nch); - params->mqprio.num_tc = 1; + mlx5e_params_mqprio_reset(params); /* Set an initial non-zero value, so that mlx5e_select_queue won't * divide by zero if called before first activating channels. @@ -4823,6 +4866,10 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv) */ priv->netdev->priv_flags &= ~IFF_RXFH_CONFIGURED; priv->channels.params.num_channels = max_nch; + if (priv->channels.params.mqprio.mode == TC_MQPRIO_MODE_CHANNEL) { + mlx5_core_warn(priv->mdev, "MLX5E: Disabling MQPRIO channel mode\n"); + mlx5e_params_mqprio_reset(&priv->channels.params); + } } if (max_nch != priv->max_nch) { mlx5_core_warn(priv->mdev, -- cgit v1.2.3 From a586775f83bd729ad60b56352dbe067f4bb0beee Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Thu, 23 Sep 2021 17:57:47 +0300 Subject: net/mlx5: E-Switch, Fix double allocation of acl flow counter Flow counter is allocated in eswitch legacy acl setting functions without checking if already allocated by previous setting. Add a check to avoid such double allocation. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Moshe Shemesh Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/esw/acl/egress_lgcy.c | 12 ++++++++---- .../net/ethernet/mellanox/mlx5/core/esw/acl/ingress_lgcy.c | 4 +++- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_lgcy.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_lgcy.c index 0399a396d166..60a73990017c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_lgcy.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_lgcy.c @@ -79,12 +79,16 @@ int esw_acl_egress_lgcy_setup(struct mlx5_eswitch *esw, int dest_num = 0; int err = 0; - if (MLX5_CAP_ESW_EGRESS_ACL(esw->dev, flow_counter)) { + if (vport->egress.legacy.drop_counter) { + drop_counter = vport->egress.legacy.drop_counter; + } else if (MLX5_CAP_ESW_EGRESS_ACL(esw->dev, flow_counter)) { drop_counter = mlx5_fc_create(esw->dev, false); - if (IS_ERR(drop_counter)) + if (IS_ERR(drop_counter)) { esw_warn(esw->dev, "vport[%d] configure egress drop rule counter err(%ld)\n", vport->vport, PTR_ERR(drop_counter)); + drop_counter = NULL; + } vport->egress.legacy.drop_counter = drop_counter; } @@ -123,7 +127,7 @@ int esw_acl_egress_lgcy_setup(struct mlx5_eswitch *esw, flow_act.action = MLX5_FLOW_CONTEXT_ACTION_DROP; /* Attach egress drop flow counter */ - if (!IS_ERR_OR_NULL(drop_counter)) { + if (drop_counter) { flow_act.action |= MLX5_FLOW_CONTEXT_ACTION_COUNT; drop_ctr_dst.type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; drop_ctr_dst.counter_id = mlx5_fc_id(drop_counter); @@ -162,7 +166,7 @@ void esw_acl_egress_lgcy_cleanup(struct mlx5_eswitch *esw, esw_acl_egress_table_destroy(vport); clean_drop_counter: - if (!IS_ERR_OR_NULL(vport->egress.legacy.drop_counter)) { + if (vport->egress.legacy.drop_counter) { mlx5_fc_destroy(esw->dev, vport->egress.legacy.drop_counter); vport->egress.legacy.drop_counter = NULL; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_lgcy.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_lgcy.c index f75b86abaf1c..b1a5199260f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_lgcy.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_lgcy.c @@ -160,7 +160,9 @@ int esw_acl_ingress_lgcy_setup(struct mlx5_eswitch *esw, esw_acl_ingress_lgcy_rules_destroy(vport); - if (MLX5_CAP_ESW_INGRESS_ACL(esw->dev, flow_counter)) { + if (vport->ingress.legacy.drop_counter) { + counter = vport->ingress.legacy.drop_counter; + } else if (MLX5_CAP_ESW_INGRESS_ACL(esw->dev, flow_counter)) { counter = mlx5_fc_create(esw->dev, false); if (IS_ERR(counter)) { esw_warn(esw->dev, -- cgit v1.2.3 From 64728294703e77827cc31a1b164ca867400067f5 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 23 Sep 2021 16:56:09 +0300 Subject: net/mlx5: Force round second at 1PPS out start time Allow configuration of 1PPS start time only with time-stamp representing a round second. Prior to this patch driver allowed setting of a non-round-second which is not supported by the device. Avoid unexpected behavior by restricting start-time configuration to a round-second. Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme") Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/lib/clock.c | 25 ++++++++++------------ 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index ffac8a0e7a23..d2ed7b0a18ea 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -448,22 +448,20 @@ static u64 find_target_cycles(struct mlx5_core_dev *mdev, s64 target_ns) return cycles_now + cycles_delta; } -static u64 perout_conf_internal_timer(struct mlx5_core_dev *mdev, - s64 sec, u32 nsec) +static u64 perout_conf_internal_timer(struct mlx5_core_dev *mdev, s64 sec) { - struct timespec64 ts; + struct timespec64 ts = {}; s64 target_ns; ts.tv_sec = sec; - ts.tv_nsec = nsec; target_ns = timespec64_to_ns(&ts); return find_target_cycles(mdev, target_ns); } -static u64 perout_conf_real_time(s64 sec, u32 nsec) +static u64 perout_conf_real_time(s64 sec) { - return (u64)nsec | (u64)sec << 32; + return (u64)sec << 32; } static int mlx5_perout_configure(struct ptp_clock_info *ptp, @@ -501,8 +499,10 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp, if (on) { bool rt_mode = mlx5_real_time_mode(mdev); - u32 nsec; - s64 sec; + s64 sec = rq->perout.start.sec; + + if (rq->perout.start.nsec) + return -EINVAL; pin_mode = MLX5_PIN_MODE_OUT; pattern = MLX5_OUT_PATTERN_PERIODIC; @@ -513,14 +513,11 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp, if ((ns >> 1) != 500000000LL) return -EINVAL; - nsec = rq->perout.start.nsec; - sec = rq->perout.start.sec; - if (rt_mode && sec > U32_MAX) return -EINVAL; - time_stamp = rt_mode ? perout_conf_real_time(sec, nsec) : - perout_conf_internal_timer(mdev, sec, nsec); + time_stamp = rt_mode ? perout_conf_real_time(sec) : + perout_conf_internal_timer(mdev, sec); field_select |= MLX5_MTPPS_FS_PIN_MODE | MLX5_MTPPS_FS_PATTERN | @@ -717,7 +714,7 @@ static u64 perout_conf_next_event_timer(struct mlx5_core_dev *mdev, ts_next_sec(&ts); target_ns = timespec64_to_ns(&ts); - return rt_mode ? perout_conf_real_time(ts.tv_sec, ts.tv_nsec) : + return rt_mode ? perout_conf_real_time(ts.tv_sec) : find_target_cycles(mdev, target_ns); } -- cgit v1.2.3 From 99b9a678b2e474756770900595cb09c94498bfca Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 23 Sep 2021 15:30:01 +0300 Subject: net/mlx5: Avoid generating event after PPS out in Real time mode When in Real-time mode, HW clock is synced with the PTP daemon. Hence driver should not re-calibrate the next pulse (via MTPPSE repetitive events mechanism). This patch arms repetitive events only in free-running mode. Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support") Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index d2ed7b0a18ea..91e806c1aa21 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -472,6 +472,7 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp, container_of(ptp, struct mlx5_clock, ptp_info); struct mlx5_core_dev *mdev = container_of(clock, struct mlx5_core_dev, clock); + bool rt_mode = mlx5_real_time_mode(mdev); u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0}; struct timespec64 ts; u32 field_select = 0; @@ -535,6 +536,9 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp, if (err) return err; + if (rt_mode) + return 0; + return mlx5_set_mtppse(mdev, pin, 0, MLX5_EVENT_MODE_REPETETIVE & on); } @@ -702,20 +706,14 @@ static void ts_next_sec(struct timespec64 *ts) static u64 perout_conf_next_event_timer(struct mlx5_core_dev *mdev, struct mlx5_clock *clock) { - bool rt_mode = mlx5_real_time_mode(mdev); struct timespec64 ts; s64 target_ns; - if (rt_mode) - ts = mlx5_ptp_gettimex_real_time(mdev, NULL); - else - mlx5_ptp_gettimex(&clock->ptp_info, &ts, NULL); - + mlx5_ptp_gettimex(&clock->ptp_info, &ts, NULL); ts_next_sec(&ts); target_ns = timespec64_to_ns(&ts); - return rt_mode ? perout_conf_real_time(ts.tv_sec) : - find_target_cycles(mdev, target_ns); + return find_target_cycles(mdev, target_ns); } static int mlx5_pps_event(struct notifier_block *nb, -- cgit v1.2.3 From ac8b7d50ae4c3f5325c599f3d6e939ecef6a585a Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Thu, 19 Aug 2021 16:01:28 +0300 Subject: net/mlx5: Fix length of irq_index in chars The maximum irq_index can be 2047, This means irq_name should have 4 characters reserve for the irq_index. Hence, increase it to 4. Fixes: 3af26495a247 ("net/mlx5: Enlarge interrupt field in CREATE_EQ") Signed-off-by: Shay Drory Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c index c79a10b3454d..df54f62a38ac 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c @@ -13,8 +13,8 @@ #endif #define MLX5_MAX_IRQ_NAME (32) -/* max irq_index is 255. three chars */ -#define MLX5_MAX_IRQ_IDX_CHARS (3) +/* max irq_index is 2047, so four chars */ +#define MLX5_MAX_IRQ_IDX_CHARS (4) #define MLX5_SFS_PER_CTRL_IRQ 64 #define MLX5_IRQ_CTRL_SF_MAX 8 -- cgit v1.2.3 From f88c4876347400a577598e06f1b230a7b19ee0e9 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Tue, 14 Sep 2021 10:13:02 +0300 Subject: net/mlx5: Fix setting number of EQs of SFs When setting number of completion EQs of the SF, consider number of online CPUs. Without this consideration, when number of online cpus are less than 8, unnecessary 8 completion EQs are allocated. Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs") Signed-off-by: Shay Drory Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c index df54f62a38ac..763c83a02380 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c @@ -633,8 +633,9 @@ void mlx5_irq_table_destroy(struct mlx5_core_dev *dev) int mlx5_irq_table_get_sfs_vec(struct mlx5_irq_table *table) { if (table->sf_comp_pool) - return table->sf_comp_pool->xa_num_irqs.max - - table->sf_comp_pool->xa_num_irqs.min + 1; + return min_t(int, num_online_cpus(), + table->sf_comp_pool->xa_num_irqs.max - + table->sf_comp_pool->xa_num_irqs.min + 1); else return mlx5_irq_table_get_num_comp(table); } -- cgit v1.2.3 From dd1979cf3c710398a9eeba4853b908fe16426814 Mon Sep 17 00:00:00 2001 From: Lama Kayal Date: Sun, 29 Aug 2021 11:26:03 +0300 Subject: net/mlx5e: Fix the presented RQ index in PTP stats PTP-RQ counters title format contains PTP-RQ identifier, which is mistakenly not passed to sprinft(). This leads to unexpected garbage values instead. This patch fixes it. Before applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq15_packets: 0 ptp_rq8_bytes: 0 ptp_rq6_csum_complete: 0 ptp_rq14_csum_complete_tail: 0 ptp_rq3_csum_complete_tail_slow : 0 ptp_rq9_csum_unnecessary: 0 ptp_rq1_csum_unnecessary_inner: 0 ptp_rq7_csum_none: 0 ptp_rq10_xdp_drop: 0 ptp_rq9_xdp_redirect: 0 ptp_rq13_lro_packets: 0 ptp_rq12_lro_bytes: 0 ptp_rq10_ecn_mark: 0 ptp_rq9_removed_vlan_packets: 0 ptp_rq5_wqe_err: 0 ptp_rq8_mpwqe_filler_cqes: 0 ptp_rq2_mpwqe_filler_strides: 0 ptp_rq5_oversize_pkts_sw_drop: 0 ptp_rq6_buff_alloc_err: 0 ptp_rq15_cqe_compress_blks: 0 ptp_rq2_cqe_compress_pkts: 0 ptp_rq2_cache_reuse: 0 ptp_rq12_cache_full: 0 ptp_rq11_cache_empty: 256 ptp_rq12_cache_busy: 0 ptp_rq11_cache_waive: 0 ptp_rq12_congst_umr: 0 ptp_rq11_arfs_err: 0 ptp_rq9_recover: 0 After applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq0_packets: 0 ptp_rq0_bytes: 0 ptp_rq0_csum_complete: 0 ptp_rq0_csum_complete_tail: 0 ptp_rq0_csum_complete_tail_slow : 0 ptp_rq0_csum_unnecessary: 0 ptp_rq0_csum_unnecessary_inner: 0 ptp_rq0_csum_none: 0 ptp_rq0_xdp_drop: 0 ptp_rq0_xdp_redirect: 0 ptp_rq0_lro_packets: 0 ptp_rq0_lro_bytes: 0 ptp_rq0_ecn_mark: 0 ptp_rq0_removed_vlan_packets: 0 ptp_rq0_wqe_err: 0 ptp_rq0_mpwqe_filler_cqes: 0 ptp_rq0_mpwqe_filler_strides: 0 ptp_rq0_oversize_pkts_sw_drop: 0 ptp_rq0_buff_alloc_err: 0 ptp_rq0_cqe_compress_blks: 0 ptp_rq0_cqe_compress_pkts: 0 ptp_rq0_cache_reuse: 0 ptp_rq0_cache_full: 0 ptp_rq0_cache_empty: 256 ptp_rq0_cache_busy: 0 ptp_rq0_cache_waive: 0 ptp_rq0_congst_umr: 0 ptp_rq0_arfs_err: 0 ptp_rq0_recover: 0 Fixes: a28359e922c6 ("net/mlx5e: Add PTP-RX statistics") Signed-off-by: Lama Kayal Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c | 3 +-- drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 3 ++- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c index ee688dec67a9..3a86f66d1295 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c @@ -13,8 +13,6 @@ struct mlx5e_ptp_fs { bool valid; }; -#define MLX5E_PTP_CHANNEL_IX 0 - struct mlx5e_ptp_params { struct mlx5e_params params; struct mlx5e_sq_param txq_sq_param; @@ -509,6 +507,7 @@ static int mlx5e_init_ptp_rq(struct mlx5e_ptp *c, struct mlx5e_params *params, rq->mdev = mdev; rq->hw_mtu = MLX5E_SW2HW_MTU(params, params->sw_mtu); rq->stats = &c->priv->ptp_stats.rq; + rq->ix = MLX5E_PTP_CHANNEL_IX; rq->ptp_cyc2time = mlx5_rq_ts_translator(mdev); err = mlx5e_rq_set_handlers(rq, params, false); if (err) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h index c96668bd701c..a71a32e00ebb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h @@ -8,6 +8,8 @@ #include "en_stats.h" #include +#define MLX5E_PTP_CHANNEL_IX 0 + struct mlx5e_ptpsq { struct mlx5e_txqsq txqsq; struct mlx5e_cq ts_cq; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 46bf78169f63..e1dd17019030 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -34,6 +34,7 @@ #include "en.h" #include "en_accel/tls.h" #include "en_accel/en_accel.h" +#include "en/ptp.h" static unsigned int stats_grps_num(struct mlx5e_priv *priv) { @@ -2076,7 +2077,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(ptp) if (priv->rx_ptp_opened) { for (i = 0; i < NUM_PTP_RQ_STATS; i++) sprintf(data + (idx++) * ETH_GSTRING_LEN, - ptp_rq_stats_desc[i].format); + ptp_rq_stats_desc[i].format, MLX5E_PTP_CHANNEL_IX); } return idx; } -- cgit v1.2.3 From 3bf1742f3c69501dec300b55917b9352428cb4dd Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Mon, 13 Sep 2021 16:49:47 +0300 Subject: net/mlx5e: Mutually exclude setting of TX-port-TS and MQPRIO in channel mode TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This conflicts with MQPRIO in channel mode, which specifies explicitly which TC accepts the packet. This patch mutually excludes the above configuration. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 11 +++++++++++ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++++++ 2 files changed, 19 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 306fb5d6a36d..9d451b8ee467 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -2036,6 +2036,17 @@ static int set_pflag_tx_port_ts(struct net_device *netdev, bool enable) } new_params = priv->channels.params; + /* Don't allow enabling TX-port-TS if MQPRIO mode channel offload is + * active, since it defines explicitly which TC accepts the packet. + * This conflicts with TX-port-TS hijacking the PTP traffic to a specific + * HW TX-queue. + */ + if (enable && new_params.mqprio.mode == TC_MQPRIO_MODE_CHANNEL) { + netdev_err(priv->netdev, + "%s: MQPRIO mode channel offload is active, cannot set the TX-port-TS\n", + __func__); + return -EINVAL; + } MLX5E_SET_PFLAG(&new_params, MLX5E_PFLAG_TX_PORT_TS, enable); /* No need to verify SQ stop room as * ptpsq.txqsq.stop_room <= generic_sq->stop_room, and both diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 0390395f421f..0c5197f9cea3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2945,9 +2945,17 @@ static int mlx5e_mqprio_channel_validate(struct mlx5e_priv *priv, struct tc_mqprio_qopt_offload *mqprio) { struct net_device *netdev = priv->netdev; + struct mlx5e_ptp *ptp_channel; int agg_count = 0; int i; + ptp_channel = priv->channels.ptp; + if (ptp_channel && test_bit(MLX5E_PTP_STATE_TX, ptp_channel->state)) { + netdev_err(netdev, + "Cannot activate MQPRIO mode channel since it conflicts with TX port TS\n"); + return -EINVAL; + } + if (mqprio->qopt.offset[0] != 0 || mqprio->qopt.num_tc < 1 || mqprio->qopt.num_tc > MLX5E_MAX_NUM_MQPRIO_CH_TC) return -EINVAL; -- cgit v1.2.3 From 4729445b47efebf089da4ccbcd1b116ffa2ad4af Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Thu, 30 Sep 2021 11:46:34 +0530 Subject: libbpf: Fix segfault in light skeleton for objects without BTF When fed an empty BPF object, bpftool gen skeleton -L crashes at btf__set_fd() since it assumes presence of obj->btf, however for the sequence below clang adds no .BTF section (hence no BTF). Reproducer: $ touch a.bpf.c $ clang -O2 -g -target bpf -c a.bpf.c $ bpftool gen skeleton -L a.bpf.o /* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ /* THIS FILE IS AUTOGENERATED! */ struct a_bpf { struct bpf_loader_ctx ctx; Segmentation fault (core dumped) The same occurs for files compiled without BTF info, i.e. without clang's -g flag. Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210930061634.1840768-1-memxor@gmail.com --- tools/lib/bpf/libbpf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 88d8825fc6f6..e4f83c304ec9 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -6894,7 +6894,8 @@ int bpf_object__load_xattr(struct bpf_object_load_attr *attr) if (obj->gen_loader) { /* reset FDs */ - btf__set_fd(obj->btf, -1); + if (obj->btf) + btf__set_fd(obj->btf, -1); for (i = 0; i < obj->nr_maps; i++) obj->maps[i].fd = -1; if (!err) -- cgit v1.2.3 From 10eff1f5788b6ffac212c254e2f3666219576889 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Thu, 30 Sep 2021 20:49:42 +0300 Subject: Revert "net: mdiobus: Fix memory leak in __mdiobus_register" This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/mdio_bus.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6f4b4e5df639..53f034fc2ef7 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -537,7 +537,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) err = device_register(&bus->dev); if (err) { pr_err("mii_bus %s failed to register\n", bus->id); - put_device(&bus->dev); return -EINVAL; } -- cgit v1.2.3 From ca6e11c337daf7925ff8a2aac8e84490a8691905 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Thu, 30 Sep 2021 20:50:28 +0300 Subject: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/ Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Reviewed-by: Dan Carpenter Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/mdio_bus.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 53f034fc2ef7..fca8e335d750 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -534,6 +534,13 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) bus->dev.groups = NULL; dev_set_name(&bus->dev, "%s", bus->id); + /* We need to set state to MDIOBUS_UNREGISTERED to correctly release + * the device in mdiobus_free() + * + * State will be updated later in this function in case of success + */ + bus->state = MDIOBUS_UNREGISTERED; + err = device_register(&bus->dev); if (err) { pr_err("mii_bus %s failed to register\n", bus->id); -- cgit v1.2.3 From 87ffb310d5e8a441721a9d04dfa7c90cd9da3916 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 30 Sep 2021 15:24:56 +0300 Subject: ksmbd: missing check for NULL in convert_to_nt_pathname() The kmalloc() does not have a NULL check. This code can be re-written slightly cleaner to just use the kstrdup(). Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access") Signed-off-by: Dan Carpenter Acked-by: Namjae Jeon Acked-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/misc.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 6a19f4bc692d..60e7ac62c917 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -162,17 +162,14 @@ char *convert_to_nt_pathname(char *filename) { char *ab_pathname; - if (strlen(filename) == 0) { - ab_pathname = kmalloc(2, GFP_KERNEL); - ab_pathname[0] = '\\'; - ab_pathname[1] = '\0'; - } else { - ab_pathname = kstrdup(filename, GFP_KERNEL); - if (!ab_pathname) - return NULL; + if (strlen(filename) == 0) + filename = "\\"; - ksmbd_conv_path_to_windows(ab_pathname); - } + ab_pathname = kstrdup(filename, GFP_KERNEL); + if (!ab_pathname) + return NULL; + + ksmbd_conv_path_to_windows(ab_pathname); return ab_pathname; } -- cgit v1.2.3 From 8001f21fcd03253ba0eeac6f91f79239ac03ee60 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Mon, 27 Sep 2021 21:27:24 -0700 Subject: MAINTAINERS: Add Hao and Yilun as maintainers Hao and Yilun have agreed to help out with maintenance. Both have been active in the Linux FPGA community for a long time and we need backups for vacation and load-balancing. Cc: Xu Yilun Cc: Wu Hao Cc: Greg Kroah-Hartman Acked-by: Xu Yilun Acked-by: Wu Hao Signed-off-by: Moritz Fischer --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..2ec4c2a2458a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7337,6 +7337,8 @@ F: include/uapi/linux/fpga-dfl.h FPGA MANAGER FRAMEWORK M: Moritz Fischer +M: Wu Hao +M: Xu Yilun R: Tom Rix L: linux-fpga@vger.kernel.org S: Maintained -- cgit v1.2.3 From a2c2f0826e2b75560b31daf1cd9a755ab93cf4c6 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Fri, 20 Aug 2021 12:45:05 +0800 Subject: ext4: limit the number of blocks in one ADD_RANGE TLV Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the newly-added blocks, but the limit on the max value of ee_len field is ignored, and it can lead to BUG_ON as shown below when running command "fallocate -l 128M file" on a fast_commit-enabled fs: kernel BUG at fs/ext4/ext4_extents.h:199! invalid opcode: 0000 [#1] SMP PTI CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200 Call Trace: ? ext4_fc_write_inode+0xf2/0x150 ext4_fc_commit+0x93b/0xa00 ? ext4_fallocate+0x1ad/0x10d0 ext4_sync_file+0x157/0x340 ? ext4_sync_file+0x157/0x340 vfs_fsync_range+0x49/0x80 do_fsync+0x3d/0x70 __x64_sys_fsync+0x14/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Simply fixing it by limiting the number of blocks in one EXT4_FC_TAG_ADD_RANGE TLV. Fixes: aa75f4d3daae ("ext4: main fast-commit commit path") Cc: stable@kernel.org Signed-off-by: Hou Tao Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com --- fs/ext4/fast_commit.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c index 8e610a381862..8ea5a81e6554 100644 --- a/fs/ext4/fast_commit.c +++ b/fs/ext4/fast_commit.c @@ -892,6 +892,12 @@ static int ext4_fc_write_inode_data(struct inode *inode, u32 *crc) sizeof(lrange), (u8 *)&lrange, crc)) return -ENOSPC; } else { + unsigned int max = (map.m_flags & EXT4_MAP_UNWRITTEN) ? + EXT_UNWRITTEN_MAX_LEN : EXT_INIT_MAX_LEN; + + /* Limit the number of blocks in one extent */ + map.m_len = min(max, map.m_len); + fc_ext.fc_ino = cpu_to_le32(inode->i_ino); ex = (struct ext4_extent *)&fc_ext.fc_ex; ex->ee_block = cpu_to_le32(map.m_lblk); -- cgit v1.2.3 From 6fed83957f21eff11c8496e9f24253b03d2bc1dc Mon Sep 17 00:00:00 2001 From: Jeffle Xu Date: Mon, 23 Aug 2021 14:13:58 +0800 Subject: ext4: fix reserved space counter leakage When ext4_insert_delayed block receives and recovers from an error from ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the space it has reserved for that block insertion as it should. One effect of this bug is that s_dirtyclusters_counter is not decremented and remains incorrectly elevated until the file system has been unmounted. This can result in premature ENOSPC returns and apparent loss of free space. Another effect of this bug is that /sys/fs/ext4//delayed_allocation_blocks can remain non-zero even after syncfs has been executed on the filesystem. Besides, add check for s_dirtyclusters_counter when inode is going to be evicted and freed. s_dirtyclusters_counter can still keep non-zero until inode is written back in .evict_inode(), and thus the check is delayed to .destroy_inode(). Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree") Cc: stable@kernel.org Suggested-by: Gao Xiang Signed-off-by: Jeffle Xu Reviewed-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com --- fs/ext4/inode.c | 5 +++++ fs/ext4/super.c | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2a076d236ba1..9df1ab070fa5 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1628,6 +1628,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); int ret; bool allocated = false; + bool reserved = false; /* * If the cluster containing lblk is shared with a delayed, @@ -1644,6 +1645,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) ret = ext4_da_reserve_space(inode); if (ret != 0) /* ENOSPC */ goto errout; + reserved = true; } else { /* bigalloc */ if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) { if (!ext4_es_scan_clu(inode, @@ -1656,6 +1658,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) ret = ext4_da_reserve_space(inode); if (ret != 0) /* ENOSPC */ goto errout; + reserved = true; } else { allocated = true; } @@ -1666,6 +1669,8 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) } ret = ext4_es_insert_delayed_block(inode, lblk, allocated); + if (ret && reserved) + ext4_da_release_space(inode, 1); errout: return ret; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index feca816b6bf3..a52f1572daa5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1352,6 +1352,12 @@ static void ext4_destroy_inode(struct inode *inode) true); dump_stack(); } + + if (EXT4_I(inode)->i_reserved_data_blocks) + ext4_msg(inode->i_sb, KERN_ERR, + "Inode %lu (%p): i_reserved_data_blocks (%u) not cleared!", + inode->i_ino, EXT4_I(inode), + EXT4_I(inode)->i_reserved_data_blocks); } static void init_once(void *foo) -- cgit v1.2.3 From 75ca6ad408f459f00b09a64f04c774559848c097 Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Sat, 5 Jun 2021 10:39:32 +0530 Subject: ext4: fix loff_t overflow in ext4_max_bitmap_size() We should use unsigned long long rather than loff_t to avoid overflow in ext4_max_bitmap_size() for comparison before returning. w/o this patch sbi->s_bitmap_maxbytes was becoming a negative value due to overflow of upper_limit (with has_huge_files as true) Below is a quick test to trigger it on a 64KB pagesize system. sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2 sudo mount /dev/loop2 /mnt sudo echo "hello" > /mnt/hello -> This will error out with "echo: write error: File too large" Signed-off-by: Ritesh Harjani Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index a52f1572daa5..9b5b2f63b470 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3030,17 +3030,17 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files) */ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) { - loff_t res = EXT4_NDIR_BLOCKS; + unsigned long long upper_limit, res = EXT4_NDIR_BLOCKS; int meta_blocks; - loff_t upper_limit; - /* This is calculated to be the largest file size for a dense, block + + /* + * This is calculated to be the largest file size for a dense, block * mapped file such that the file's total number of 512-byte sectors, * including data and all indirect blocks, does not exceed (2^48 - 1). * * __u32 i_blocks_lo and _u16 i_blocks_high represent the total * number of 512-byte sectors of the file. */ - if (!has_huge_files) { /* * !has_huge_files or implies that the inode i_block field @@ -3083,7 +3083,7 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) if (res > MAX_LFS_FILESIZE) res = MAX_LFS_FILESIZE; - return res; + return (loff_t)res; } static ext4_fsblk_t descriptor_loc(struct super_block *sb, -- cgit v1.2.3 From bb9464e08309f6befe80866f5be51778ca355ee9 Mon Sep 17 00:00:00 2001 From: yangerkun Date: Fri, 24 Sep 2021 17:39:17 +0800 Subject: ext4: flush s_error_work before journal destroy in ext4_fill_super The error path in ext4_fill_super forget to flush s_error_work before journal destroy, and it may trigger the follow bug since flush_stashed_error_work can run concurrently with journal destroy without any protection for sbi->s_journal. [32031.740193] EXT4-fs (loop66): get root inode failed [32031.740484] EXT4-fs (loop66): mount failed [32031.759805] ------------[ cut here ]------------ [32031.759807] kernel BUG at fs/jbd2/transaction.c:373! [32031.760075] invalid opcode: 0000 [#1] SMP PTI [32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded 4.18.0 [32031.765112] Call Trace: [32031.765375] ? __switch_to_asm+0x35/0x70 [32031.765635] ? __switch_to_asm+0x41/0x70 [32031.765893] ? __switch_to_asm+0x35/0x70 [32031.766148] ? __switch_to_asm+0x41/0x70 [32031.766405] ? _cond_resched+0x15/0x40 [32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2] [32031.766934] jbd2_journal_start+0x19/0x20 [jbd2] [32031.767218] flush_stashed_error_work+0x30/0x90 [ext4] [32031.767487] process_one_work+0x195/0x390 [32031.767747] worker_thread+0x30/0x390 [32031.768007] ? process_one_work+0x390/0x390 [32031.768265] kthread+0x10d/0x130 [32031.768521] ? kthread_flush_work_fn+0x10/0x10 [32031.768778] ret_from_fork+0x35/0x40 static int start_this_handle(...) BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this Besides, after we enable fast commit, ext4_fc_replay can add work to s_error_work but return success, so the latter journal destroy in ext4_load_journal can trigger this problem too. Fix this problem with two steps: 1. Call ext4_commit_super directly in ext4_handle_error for the case that called from ext4_fc_replay 2. Since it's hard to pair the init and flush for s_error_work, we'd better add a extras flush_work before journal destroy in ext4_fill_super Besides, this patch will call ext4_commit_super in ext4_handle_error for any nojournal case too. But it seems safe since the reason we call schedule_work was that we should save error info to sb through journal if available. Conversely, for the nojournal case, it seems useless delay commit superblock to s_error_work. Fixes: c92dc856848f ("ext4: defer saving error info from atomic context") Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") Cc: stable@kernel.org Signed-off-by: yangerkun Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com --- fs/ext4/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9b5b2f63b470..0049eac9de1a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -660,7 +660,7 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error, * constraints, it may not be safe to do it right here so we * defer superblock flushing to a workqueue. */ - if (continue_fs) + if (continue_fs && journal) schedule_work(&EXT4_SB(sb)->s_error_work); else ext4_commit_super(sb); @@ -5050,12 +5050,15 @@ failed_mount_wq: sbi->s_ea_block_cache = NULL; if (sbi->s_journal) { + /* flush s_error_work before journal destroy. */ + flush_work(&sbi->s_error_work); jbd2_journal_destroy(sbi->s_journal); sbi->s_journal = NULL; } failed_mount3a: ext4_es_unregister_shrinker(sbi); failed_mount3: + /* flush s_error_work before sbi destroy */ flush_work(&sbi->s_error_work); del_timer_sync(&sbi->s_err_report); ext4_stop_mmpd(sbi); -- cgit v1.2.3 From 42cb447410d024e9d54139ae9c21ea132a8c384c Mon Sep 17 00:00:00 2001 From: yangerkun Date: Tue, 14 Sep 2021 19:14:15 +0800 Subject: ext4: fix potential infinite loop in ext4_dx_readdir() When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an infinite loop since if info->last_pos != ctx->pos this will reset the directory scan and reread the failing entry. For example: 1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as leaf block which own the ext4_dir_entry_2 2. block 1 read ok and call_filldir which will fill the dirent and update the ctx->pos 3. block 2 read fail, but we has already fill some dirent, so we will return back to userspace will a positive return val(see ksys_getdents64) 4. the second ext4_dx_readdir will reset the world since info->last_pos != ctx->pos, and will also init the curr_hash which pos to block 1 5. So we will read block1 too, and once block2 still read fail, we can only fill one dirent because the hash of the entry in block1(besides the last one) won't greater than curr_hash 6. this time, we forget update last_pos too since the read for block2 will fail, and since we has got the one entry, ksys_getdents64 can return success 7. Latter we will trapped in a loop with step 4~6 Cc: stable@kernel.org Signed-off-by: yangerkun Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com --- fs/ext4/dir.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index ffb295aa891c..74b172a4adda 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -551,7 +551,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) struct dir_private_info *info = file->private_data; struct inode *inode = file_inode(file); struct fname *fname; - int ret; + int ret = 0; if (!info) { info = ext4_htree_create_dir_info(file, ctx->pos); @@ -599,7 +599,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) info->curr_minor_hash, &info->next_hash); if (ret < 0) - return ret; + goto finished; if (ret == 0) { ctx->pos = ext4_get_htree_eof(file); break; @@ -630,7 +630,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) } finished: info->last_pos = ctx->pos; - return 0; + return ret < 0 ? ret : 0; } static int ext4_release_dir(struct inode *inode, struct file *filp) -- cgit v1.2.3 From f2c77973507fd116c3657df1dc048864a2b16a1c Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 10 Sep 2021 16:03:16 +0800 Subject: ext4: recheck buffer uptodate bit under buffer lock Commit 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again under buffer lock, which may overwrite the buffer if someone else have already brought it uptodate and changed it. Fixes: 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()") Cc: stable@kernel.org Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com --- fs/ext4/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9df1ab070fa5..b7c561ad38dd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4277,6 +4277,12 @@ static int __ext4_get_inode_loc(struct super_block *sb, unsigned long ino, goto has_buffer; lock_buffer(bh); + if (ext4_buffer_uptodate(bh)) { + /* Someone brought it uptodate while we waited */ + unlock_buffer(bh); + goto has_buffer; + } + /* * If we have all information of the inode in memory and this * is the only valid inode in the block, we need not read the -- cgit v1.2.3 From 2b987fe84429361c7f189568c476d1bd00d2ff7e Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Fri, 1 Oct 2021 14:28:56 +0800 Subject: ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 The headphone mic is not working on Dell Latitude laptops with ALC3254. The codec vendor id is 0x10ec0295 and share the same pincfg as defined in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE need to be applied instead. Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before a generic fixup comes out. Signed-off-by: Chris Chiu Cc: Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f17bfc6007d3..6bf6151347d8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8453,6 +8453,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK), + SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), -- cgit v1.2.3 From 06f2ac3d4219bbbfd93d79e01966a42053084f11 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Thu, 30 Sep 2021 23:42:01 -0500 Subject: x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0] After returning from a VMGEXIT NAE event, SW_EXITINFO1[31:0] is checked for a value of 1, which indicates an error and that SW_EXITINFO2 contains exception information. However, future versions of the GHCB specification may define new values for SW_EXITINFO1[31:0], so really any non-zero value should be treated as an error. Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler") Signed-off-by: Tom Lendacky Signed-off-by: Borislav Petkov Cc: # 5.10+ Link: https://lkml.kernel.org/r/efc772af831e9e7f517f0439b13b41f56bad8784.1633063321.git.thomas.lendacky@amd.com --- arch/x86/kernel/sev-shared.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/sev-shared.c b/arch/x86/kernel/sev-shared.c index 9f90f460a28c..bf1033a62e48 100644 --- a/arch/x86/kernel/sev-shared.c +++ b/arch/x86/kernel/sev-shared.c @@ -130,6 +130,8 @@ static enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb, } else { ret = ES_VMM_ERROR; } + } else if (ghcb->save.sw_exit_info_1 & 0xffffffff) { + ret = ES_VMM_ERROR; } else { ret = ES_OK; } -- cgit v1.2.3 From 6e3cd95234dc1eda488f4f487c281bac8fef4d9b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 30 Sep 2021 19:21:39 +0200 Subject: x86/hpet: Use another crystalball to evaluate HPET usability On recent Intel systems the HPET stops working when the system reaches PC10 idle state. The approach of adding PCI ids to the early quirks to disable HPET on these systems is a whack a mole game which makes no sense. Check for PC10 instead and force disable HPET if supported. The check is overbroad as it does not take ACPI, intel_idle enablement and command line parameters into account. That's fine as long as there is at least PMTIMER available to calibrate the TSC frequency. The decision can be overruled by adding "hpet=force" on the kernel command line. Remove the related early PCI quirks for affected Ice Cake and Coffin Lake systems as they are not longer required. That should also cover all other systems, i.e. Tiger Rag and newer generations, which are most likely affected by this as well. Fixes: Yet another hardware trainwreck Reported-by: Jakub Kicinski Signed-off-by: Thomas Gleixner Tested-by: Jakub Kicinski Reviewed-by: Rafael J. Wysocki Cc: stable@vger.kernel.org Cc: Kai-Heng Feng Cc: Bjorn Helgaas --- arch/x86/kernel/early-quirks.c | 6 ---- arch/x86/kernel/hpet.c | 81 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 38837dad46e6..391a4e2b8604 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -714,12 +714,6 @@ static struct chipset early_qrk[] __initdata = { */ { PCI_VENDOR_ID_INTEL, 0x0f00, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, - { PCI_VENDOR_ID_INTEL, 0x3e20, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, - { PCI_VENDOR_ID_INTEL, 0x3ec4, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, - { PCI_VENDOR_ID_INTEL, 0x8a12, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, { PCI_VENDOR_ID_BROADCOM, 0x4331, PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, {} diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 42fc41dd0e1f..882213df3713 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -10,6 +10,7 @@ #include #include #include +#include #undef pr_fmt #define pr_fmt(fmt) "hpet: " fmt @@ -916,6 +917,83 @@ static bool __init hpet_counting(void) return false; } +static bool __init mwait_pc10_supported(void) +{ + unsigned int eax, ebx, ecx, mwait_substates; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + return false; + + if (!cpu_feature_enabled(X86_FEATURE_MWAIT)) + return false; + + if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF) + return false; + + cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &mwait_substates); + + return (ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) && + (ecx & CPUID5_ECX_INTERRUPT_BREAK) && + (mwait_substates & (0xF << 28)); +} + +/* + * Check whether the system supports PC10. If so force disable HPET as that + * stops counting in PC10. This check is overbroad as it does not take any + * of the following into account: + * + * - ACPI tables + * - Enablement of intel_idle + * - Command line arguments which limit intel_idle C-state support + * + * That's perfectly fine. HPET is a piece of hardware designed by committee + * and the only reasons why it is still in use on modern systems is the + * fact that it is impossible to reliably query TSC and CPU frequency via + * CPUID or firmware. + * + * If HPET is functional it is useful for calibrating TSC, but this can be + * done via PMTIMER as well which seems to be the last remaining timer on + * X86/INTEL platforms that has not been completely wreckaged by feature + * creep. + * + * In theory HPET support should be removed altogether, but there are older + * systems out there which depend on it because TSC and APIC timer are + * dysfunctional in deeper C-states. + * + * It's only 20 years now that hardware people have been asked to provide + * reliable and discoverable facilities which can be used for timekeeping + * and per CPU timer interrupts. + * + * The probability that this problem is going to be solved in the + * forseeable future is close to zero, so the kernel has to be cluttered + * with heuristics to keep up with the ever growing amount of hardware and + * firmware trainwrecks. Hopefully some day hardware people will understand + * that the approach of "This can be fixed in software" is not sustainable. + * Hope dies last... + */ +static bool __init hpet_is_pc10_damaged(void) +{ + unsigned long long pcfg; + + /* Check whether PC10 substates are supported */ + if (!mwait_pc10_supported()) + return false; + + /* Check whether PC10 is enabled in PKG C-state limit */ + rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, pcfg); + if ((pcfg & 0xF) < 8) + return false; + + if (hpet_force_user) { + pr_warn("HPET force enabled via command line, but dysfunctional in PC10.\n"); + return false; + } + + pr_info("HPET dysfunctional in PC10. Force disabled.\n"); + boot_hpet_disable = true; + return true; +} + /** * hpet_enable - Try to setup the HPET timer. Returns 1 on success. */ @@ -929,6 +1007,9 @@ int __init hpet_enable(void) if (!is_hpet_capable()) return 0; + if (hpet_is_pc10_damaged()) + return 0; + hpet_set_mapping(); if (!hpet_virt_address) return 0; -- cgit v1.2.3 From 24ff652573754fe4c03213ebd26b17e86842feb3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 30 Sep 2021 12:43:10 +0200 Subject: objtool: Teach get_alt_entry() about more relocation types Occasionally objtool encounters symbol (as opposed to section) relocations in .altinstructions. Typically they are the alternatives written by elf_add_alternative() as encountered on a noinstr validation run on vmlinux after having already ran objtool on the individual .o files. Basically this is the counterpart of commit 44f6a7c0755d ("objtool: Fix seg fault with Clang non-section symbols"), because when these new assemblers (binutils now also does this) strip the section symbols, elf_add_reloc_to_insn() is forced to emit symbol based relocations. As such, teach get_alt_entry() about different relocation types. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Reported-by: Stephen Rothwell Reported-by: Borislav Petkov Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Tested-by: Nathan Chancellor Link: https://lore.kernel.org/r/YVWUvknIEVNkPvnP@hirez.programming.kicks-ass.net --- tools/objtool/special.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/tools/objtool/special.c b/tools/objtool/special.c index bc925cf19e2d..f58ecc50fb10 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -58,6 +58,24 @@ void __weak arch_handle_alternative(unsigned short feature, struct special_alt * { } +static bool reloc2sec_off(struct reloc *reloc, struct section **sec, unsigned long *off) +{ + switch (reloc->sym->type) { + case STT_FUNC: + *sec = reloc->sym->sec; + *off = reloc->sym->offset + reloc->addend; + return true; + + case STT_SECTION: + *sec = reloc->sym->sec; + *off = reloc->addend; + return true; + + default: + return false; + } +} + static int get_alt_entry(struct elf *elf, struct special_entry *entry, struct section *sec, int idx, struct special_alt *alt) @@ -91,15 +109,12 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, WARN_FUNC("can't find orig reloc", sec, offset + entry->orig); return -1; } - if (orig_reloc->sym->type != STT_SECTION) { - WARN_FUNC("don't know how to handle non-section reloc symbol %s", + if (!reloc2sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off)) { + WARN_FUNC("don't know how to handle reloc symbol type: %s", sec, offset + entry->orig, orig_reloc->sym->name); return -1; } - alt->orig_sec = orig_reloc->sym->sec; - alt->orig_off = orig_reloc->addend; - if (!entry->group || alt->new_len) { new_reloc = find_reloc_by_dest(elf, sec, offset + entry->new); if (!new_reloc) { @@ -116,8 +131,11 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, if (arch_is_retpoline(new_reloc->sym)) return 1; - alt->new_sec = new_reloc->sym->sec; - alt->new_off = (unsigned int)new_reloc->addend; + if (!reloc2sec_off(new_reloc, &alt->new_sec, &alt->new_off)) { + WARN_FUNC("don't know how to handle reloc symbol type: %s", + sec, offset + entry->new, new_reloc->sym->name); + return -1; + } /* _ASM_EXTABLE_EX hack */ if (alt->new_off >= 0x7ffffff0) -- cgit v1.2.3 From 02d029a41dc986e2d5a77ecca45803857b346829 Mon Sep 17 00:00:00 2001 From: Anand K Mistry Date: Wed, 29 Sep 2021 17:04:21 +1000 Subject: perf/x86: Reset destroy callback on event init failure perf_init_event tries multiple init callbacks and does not reset the event state between tries. When x86_pmu_event_init runs, it unconditionally sets the destroy callback to hw_perf_event_destroy. On the next init attempt after x86_pmu_event_init, in perf_try_init_event, if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy callback will be run. However, if the next init didn't set the destroy callback, hw_perf_event_destroy will be run (since the callback wasn't reset). Looking at other pmu init functions, the common pattern is to only set the destroy callback on a successful init. Resetting the callback on failure tries to replicate that pattern. This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second) run of the perf tool after a reboot results in 0 samples being generated. The extra run of hw_perf_event_destroy results in active_events having an extra decrement on each perf run. The second run has active_events == 0 and every subsequent run has active_events < 0. When active_events == 0, the NMI handler will early-out and not record any samples. Signed-off-by: Anand K Mistry Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid --- arch/x86/events/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 2a57dbed4894..6dfa8ddaa60f 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2465,6 +2465,7 @@ static int x86_pmu_event_init(struct perf_event *event) if (err) { if (event->destroy) event->destroy(event); + event->destroy = NULL; } if (READ_ONCE(x86_pmu.attr_rdpmc) && -- cgit v1.2.3 From ecc2123e09f9e71ddc6c53d71e283b8ada685fe2 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 28 Sep 2021 08:19:03 -0700 Subject: perf/x86/intel: Update event constraints for ICX According to the latest event list, the event encoding 0xEF is only available on the first 4 counters. Add it into the event constraints table. Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com --- arch/x86/events/intel/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 7011e87be6d0..9a044438072b 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -263,6 +263,7 @@ static struct event_constraint intel_icl_event_constraints[] = { INTEL_EVENT_CONSTRAINT_RANGE(0xa8, 0xb0, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xb7, 0xbd, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xd0, 0xe6, 0xf), + INTEL_EVENT_CONSTRAINT(0xef, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xf0, 0xf4, 0xf), EVENT_CONSTRAINT_END }; -- cgit v1.2.3 From f792565326825ed806626da50c6f9a928f1079c1 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 29 Sep 2021 12:43:13 -0700 Subject: perf/core: fix userpage->time_enabled of inactive events Users of rdpmc rely on the mmapped user page to calculate accurate time_enabled. Currently, userpage->time_enabled is only updated when the event is added to the pmu. As a result, inactive event (due to counter multiplexing) does not have accurate userpage->time_enabled. This can be reproduced with something like: /* open 20 task perf_event "cycles", to create multiplexing */ fd = perf_event_open(); /* open task perf_event "cycles" */ userpage = mmap(fd); /* use mmap and rdmpc */ while (true) { time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */ time_enabled_read = read(fd).time_enabled; if (time_enabled_mmap > time_enabled_read) BUG(); } Fix this by updating userpage for inactive events in merge_sched_in. Suggested-by: Peter Zijlstra (Intel) Reported-and-tested-by: Lucian Grijincu Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com --- include/linux/perf_event.h | 4 +++- kernel/events/core.c | 34 ++++++++++++++++++++++++++++++---- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index fe156a8170aa..9b60bb89d86a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -683,7 +683,9 @@ struct perf_event { /* * timestamp shadows the actual context timing but it can * be safely used in NMI interrupt context. It reflects the - * context time as it was when the event was last scheduled in. + * context time as it was when the event was last scheduled in, + * or when ctx_sched_in failed to schedule the event because we + * run out of PMC. * * ctx_time already accounts for ctx->timestamp. Therefore to * compute ctx_time for a sample, simply add perf_clock(). diff --git a/kernel/events/core.c b/kernel/events/core.c index 0c000cb01eeb..f23ca260307f 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3707,6 +3707,29 @@ static noinline int visit_groups_merge(struct perf_cpu_context *cpuctx, return 0; } +static inline bool event_update_userpage(struct perf_event *event) +{ + if (likely(!atomic_read(&event->mmap_count))) + return false; + + perf_event_update_time(event); + perf_set_shadow_time(event, event->ctx); + perf_event_update_userpage(event); + + return true; +} + +static inline void group_update_userpage(struct perf_event *group_event) +{ + struct perf_event *event; + + if (!event_update_userpage(group_event)) + return; + + for_each_sibling_event(event, group_event) + event_update_userpage(event); +} + static int merge_sched_in(struct perf_event *event, void *data) { struct perf_event_context *ctx = event->ctx; @@ -3725,14 +3748,15 @@ static int merge_sched_in(struct perf_event *event, void *data) } if (event->state == PERF_EVENT_STATE_INACTIVE) { + *can_add_hw = 0; if (event->attr.pinned) { perf_cgroup_event_disable(event, ctx); perf_event_set_state(event, PERF_EVENT_STATE_ERROR); + } else { + ctx->rotate_necessary = 1; + perf_mux_hrtimer_restart(cpuctx); + group_update_userpage(event); } - - *can_add_hw = 0; - ctx->rotate_necessary = 1; - perf_mux_hrtimer_restart(cpuctx); } return 0; @@ -6324,6 +6348,8 @@ accounting: ring_buffer_attach(event, rb); + perf_event_update_time(event); + perf_set_shadow_time(event, event->ctx); perf_event_init_userpage(event); perf_event_update_userpage(event); } else { -- cgit v1.2.3 From 2630cde26711dab0d0b56a8be1616475be646d13 Mon Sep 17 00:00:00 2001 From: Michal Koutný Date: Fri, 17 Sep 2021 17:30:37 +0200 Subject: sched/fair: Add ancestors of unthrottled undecayed cfs_rq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") we add cfs_rqs with no runnable tasks but not fully decayed into the load (leaf) list. We may ignore adding some ancestors and therefore breaking tmp_alone_branch invariant. This broke LTP test cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling"). I noticed the named test still fails even with the fix (but with low probability, 1 in ~1000 executions of the test). The reason is when bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly. Fix this by adding ancestors if we notice the unthrottled cfs_rq was added to the load list. Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") Signed-off-by: Michal Koutný Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Vincent Guittot Reviewed-by: Odin Ugedal Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com --- kernel/sched/fair.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index ff69f245b939..f6a05d9b5443 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4936,8 +4936,12 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq) /* update hierarchical throttle state */ walk_tg_tree_from(cfs_rq->tg, tg_nop, tg_unthrottle_up, (void *)rq); - if (!cfs_rq->load.weight) + /* Nothing to run but something to decay (on_list)? Complete the branch */ + if (!cfs_rq->load.weight) { + if (cfs_rq->on_list) + goto unthrottle_throttle; return; + } task_delta = cfs_rq->h_nr_running; idle_task_delta = cfs_rq->idle_h_nr_running; -- cgit v1.2.3 From 703066188f63d66cc6b9d678e5b5ef1213c5938e Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 27 Sep 2021 12:46:35 +0100 Subject: sched/fair: Null terminate buffer when updating tunable_scaling This patch null-terminates the temporary buffer in sched_scaling_write() so kstrtouint() does not return failure and checks the value is valid. Before: $ cat /sys/kernel/debug/sched/tunable_scaling 1 $ echo 0 > /sys/kernel/debug/sched/tunable_scaling -bash: echo: write error: Invalid argument $ cat /sys/kernel/debug/sched/tunable_scaling 1 After: $ cat /sys/kernel/debug/sched/tunable_scaling 1 $ echo 0 > /sys/kernel/debug/sched/tunable_scaling $ cat /sys/kernel/debug/sched/tunable_scaling 0 $ echo 3 > /sys/kernel/debug/sched/tunable_scaling -bash: echo: write error: Invalid argument Fixes: 8a99b6833c88 ("sched: Move SCHED_DEBUG sysctl to debugfs") Signed-off-by: Mel Gorman Signed-off-by: Peter Zijlstra (Intel) Acked-by: Vincent Guittot Link: https://lore.kernel.org/r/20210927114635.GH3959@techsingularity.net --- kernel/sched/debug.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index 49716228efb4..17a653b67006 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -173,16 +173,22 @@ static ssize_t sched_scaling_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { char buf[16]; + unsigned int scaling; if (cnt > 15) cnt = 15; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; + buf[cnt] = '\0'; - if (kstrtouint(buf, 10, &sysctl_sched_tunable_scaling)) + if (kstrtouint(buf, 10, &scaling)) return -EINVAL; + if (scaling >= SCHED_TUNABLESCALING_END) + return -EINVAL; + + sysctl_sched_tunable_scaling = scaling; if (sched_update_scaling()) return -EINVAL; -- cgit v1.2.3 From 83d40a61046f73103b4e5d8f1310261487ff63b0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 20 Sep 2021 15:31:11 +0200 Subject: sched: Always inline is_percpu_thread() vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section Reported-by: Stephen Rothwell Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 39039ce8ac4c..c1a927ddec64 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1720,7 +1720,7 @@ extern struct pid *cad_pid; #define tsk_used_math(p) ((p)->flags & PF_USED_MATH) #define used_math() tsk_used_math(current) -static inline bool is_percpu_thread(void) +static __always_inline bool is_percpu_thread(void) { #ifdef CONFIG_SMP return (current->flags & PF_NO_SETAFFINITY) && -- cgit v1.2.3 From 19598141f40dff728dd50799e510805261f48850 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 30 Sep 2021 15:44:42 -0400 Subject: nfsd: Fix a warning for nfsd_file_close_inode Signed-off-by: Trond Myklebust Signed-off-by: Chuck Lever --- fs/nfsd/filecache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c index 7629248fdd53..be3c1aad50ea 100644 --- a/fs/nfsd/filecache.c +++ b/fs/nfsd/filecache.c @@ -542,7 +542,7 @@ nfsd_file_close_inode_sync(struct inode *inode) } /** - * nfsd_file_close_inode_sync - attempt to forcibly close a nfsd_file + * nfsd_file_close_inode - attempt a delayed close of a nfsd_file * @inode: inode of the file to attempt to remove * * Walk the whole hash bucket, looking for any files that correspond to "inode". -- cgit v1.2.3 From 2ba5acfb34957e8a7fe47cd78c77ca88e9cc2b03 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 1 Oct 2021 09:59:21 -0400 Subject: SUNRPC: fix sign error causing rpcsec_gss drops If sd_max is unsigned, then sd_max - GSS_SEQ_WIN is a very large number whenever sd_max is less than GSS_SEQ_WIN, and the comparison: seq_num <= sd->sd_max - GSS_SEQ_WIN in gss_check_seq_num is pretty much always true, even when that's clearly not what was intended. This was causing pynfs to hang when using krb5, because pynfs uses zero as the initial gss sequence number. That's perfectly legal, but this logic error causes knfsd to drop the rpc in that case. Out-of-order sequence IDs in the first GSS_SEQ_WIN (128) calls will also cause this. Fixes: 10b9d99a3dbb ("SUNRPC: Augment server-side rpcgss tracepoints") Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields Signed-off-by: Chuck Lever --- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 475a965b7b43..1ea82a2e63af 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -645,7 +645,7 @@ static bool gss_check_seq_num(const struct svc_rqst *rqstp, struct rsc *rsci, } __set_bit(seq_num % GSS_SEQ_WIN, sd->sd_win); goto ok; - } else if (seq_num <= sd->sd_max - GSS_SEQ_WIN) { + } else if (seq_num + GSS_SEQ_WIN <= sd->sd_max) { goto toolow; } if (__test_and_set_bit(seq_num % GSS_SEQ_WIN, sd->sd_win)) -- cgit v1.2.3 From 3f008385d46d3cea4a097d2615cd485f2184ba26 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 1 Oct 2021 10:39:33 +0100 Subject: io_uring: kill fasync We have never supported fasync properly, it would only fire when there is something polling io_uring making it useless. The original support came in through the initial io_uring merge for 5.1. Since it's broken and nobody has reported it, get rid of the fasync bits. Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/2f7ca3d344d406d34fa6713824198915c41cea86.1633080236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 82f867983bb3..6b9e70208782 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -403,7 +403,6 @@ struct io_ring_ctx { struct wait_queue_head cq_wait; unsigned cq_extra; atomic_t cq_timeouts; - struct fasync_struct *cq_fasync; unsigned cq_last_tm_flush; } ____cacheline_aligned_in_smp; @@ -1614,10 +1613,8 @@ static void io_cqring_ev_posted(struct io_ring_ctx *ctx) wake_up(&ctx->sq_data->wait); if (io_should_trigger_evfd(ctx)) eventfd_signal(ctx->cq_ev_fd, 1); - if (waitqueue_active(&ctx->poll_wait)) { + if (waitqueue_active(&ctx->poll_wait)) wake_up_interruptible(&ctx->poll_wait); - kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN); - } } static void io_cqring_ev_posted_iopoll(struct io_ring_ctx *ctx) @@ -1631,10 +1628,8 @@ static void io_cqring_ev_posted_iopoll(struct io_ring_ctx *ctx) } if (io_should_trigger_evfd(ctx)) eventfd_signal(ctx->cq_ev_fd, 1); - if (waitqueue_active(&ctx->poll_wait)) { + if (waitqueue_active(&ctx->poll_wait)) wake_up_interruptible(&ctx->poll_wait); - kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN); - } } /* Returns true if there are no backlogged entries after the flush */ @@ -9345,13 +9340,6 @@ static __poll_t io_uring_poll(struct file *file, poll_table *wait) return mask; } -static int io_uring_fasync(int fd, struct file *file, int on) -{ - struct io_ring_ctx *ctx = file->private_data; - - return fasync_helper(fd, file, on, &ctx->cq_fasync); -} - static int io_unregister_personality(struct io_ring_ctx *ctx, unsigned id) { const struct cred *creds; @@ -10145,7 +10133,6 @@ static const struct file_operations io_uring_fops = { .mmap_capabilities = io_uring_nommu_mmap_capabilities, #endif .poll = io_uring_poll, - .fasync = io_uring_fasync, #ifdef CONFIG_PROC_FS .show_fdinfo = io_uring_show_fdinfo, #endif -- cgit v1.2.3 From f5b667ded07569dd6e33885cffd35fd519cfc942 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 1 Oct 2021 19:14:28 +0200 Subject: thermal: Update information in MAINTAINERS Because Rui is now going to focus on work that is not related to the maintenance of the thermal subsystem in the kernel, Rafael will start to help Daniel with handling the development process as a new member of the thermal maintainers team. Rui will continue to review patches in that area. The thermal development process flow will change so that the material from the thermal git tree will be merged into the thermal branch of the linux-pm.git tree before going into the mainline. Update the information in MAINTAINERS accordingly. Signed-off-by: Rafael J. Wysocki Acked-by: Zhang Rui Acked-by: Daniel Lezcano Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 76e0fdcdd877..62257ffca56a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -414,7 +414,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm F: drivers/acpi/pmic/ ACPI THERMAL DRIVER -M: Zhang Rui +M: Rafael J. Wysocki +R: Zhang Rui L: linux-acpi@vger.kernel.org S: Supported W: https://01.org/linux-acpi @@ -18549,13 +18550,14 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/radio/radio-raremono.c THERMAL -M: Zhang Rui +M: Rafael J. Wysocki M: Daniel Lezcano R: Amit Kucheria +R: Zhang Rui L: linux-pm@vger.kernel.org S: Supported Q: https://patchwork.kernel.org/project/linux-pm/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git thermal F: Documentation/devicetree/bindings/thermal/ F: drivers/thermal/ F: include/linux/cpu_cooling.h -- cgit v1.2.3 From 75e33c55ae8fb4a177fe07c284665e1d61b02560 Mon Sep 17 00:00:00 2001 From: Ville Baillie Date: Tue, 21 Sep 2021 07:21:32 +0000 Subject: spi: atmel: Fix PDC transfer setup bug atmel_spi_dma_map_xfer to never be called in PDC mode. This causes the driver to silently fail. This patch changes the conditional to match the behaviour of the previous commit before the refactor. Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") Signed-off-by: Ville Baillie Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210921072132.21831-1-villeb@bytesnap.co.uk Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 788dcdf25f00..f872cf196c2f 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1301,7 +1301,7 @@ static int atmel_spi_one_transfer(struct spi_master *master, * DMA map early, for performance (empties dcache ASAP) and * better fault reporting. */ - if ((!master->cur_msg_mapped) + if ((!master->cur_msg->is_dma_mapped) && as->use_pdc) { if (atmel_spi_dma_map_xfer(as, xfer) < 0) return -ENOMEM; @@ -1381,7 +1381,7 @@ static int atmel_spi_one_transfer(struct spi_master *master, } } - if (!master->cur_msg_mapped + if (!master->cur_msg->is_dma_mapped && as->use_pdc) atmel_spi_dma_unmap_xfer(master, xfer); -- cgit v1.2.3 From 3672bb820f3292b6f035469f863c020317a3dd28 Mon Sep 17 00:00:00 2001 From: Dafna Hirschfeld Date: Fri, 1 Oct 2021 17:21:53 +0200 Subject: spi: mediatek: skip delays if they are 0 In the function 'mtk_spi_set_hw_cs_timing' the 'setup', 'hold' and 'inactive' delays are configured. In case those values are 0 it causes errors on mt8173: cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0: Error transferring EC i2c message -71 cros-ec-spi spi0.0: EC failed to respond in time. This patch fixes that issues by setting only the values that are not 0. Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter") Signed-off-by: Dafna Hirschfeld Link: https://lore.kernel.org/r/20211001152153.4604-1-dafna.hirschfeld@collabora.com Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 64 +++++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 28 deletions(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 386e8c84be0a..a15de10ee286 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi) return delay; inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000; - setup = setup ? setup : 1; - hold = hold ? hold : 1; - inactive = inactive ? inactive : 1; - - reg_val = readl(mdata->base + SPI_CFG0_REG); - if (mdata->dev_comp->enhance_timing) { - hold = min_t(u32, hold, 0x10000); - setup = min_t(u32, setup, 0x10000); - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); - reg_val |= (((hold - 1) & 0xffff) - << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); - reg_val |= (((setup - 1) & 0xffff) - << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); - } else { - hold = min_t(u32, hold, 0x100); - setup = min_t(u32, setup, 0x100); - reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET); - reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); - reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET); - reg_val |= (((setup - 1) & 0xff) - << SPI_CFG0_CS_SETUP_OFFSET); + if (hold || setup) { + reg_val = readl(mdata->base + SPI_CFG0_REG); + if (mdata->dev_comp->enhance_timing) { + if (hold) { + hold = min_t(u32, hold, 0x10000); + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); + reg_val |= (((hold - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); + } + if (setup) { + setup = min_t(u32, setup, 0x10000); + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); + reg_val |= (((setup - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); + } + } else { + if (hold) { + hold = min_t(u32, hold, 0x100); + reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET); + reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); + } + if (setup) { + setup = min_t(u32, setup, 0x100); + reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET); + reg_val |= (((setup - 1) & 0xff) + << SPI_CFG0_CS_SETUP_OFFSET); + } + } + writel(reg_val, mdata->base + SPI_CFG0_REG); } - writel(reg_val, mdata->base + SPI_CFG0_REG); - inactive = min_t(u32, inactive, 0x100); - reg_val = readl(mdata->base + SPI_CFG1_REG); - reg_val &= ~SPI_CFG1_CS_IDLE_MASK; - reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); - writel(reg_val, mdata->base + SPI_CFG1_REG); + if (inactive) { + inactive = min_t(u32, inactive, 0x100); + reg_val = readl(mdata->base + SPI_CFG1_REG); + reg_val &= ~SPI_CFG1_CS_IDLE_MASK; + reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); + writel(reg_val, mdata->base + SPI_CFG1_REG); + } return 0; } -- cgit v1.2.3 From 5fb14d20f8241461d351bef73e49871e4b2330ab Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 Oct 2021 09:46:22 -0700 Subject: net: add kerneldoc comment for sk_peer_lock Fixes following warning: include/net/sock.h:533: warning: Function parameter or member 'sk_peer_lock' not described in 'sock' Fixes: 35306eb23814 ("af_unix: fix races in sk_peer_pid and sk_peer_cred accesses") Signed-off-by: Eric Dumazet Reported-by: Stephen Rothwell Link: https://lore.kernel.org/r/20211001164622.58520-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- include/net/sock.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/sock.h b/include/net/sock.h index ae929e21a376..ea6fbc88c8f9 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -307,6 +307,7 @@ struct bpf_local_storage; * @sk_priority: %SO_PRIORITY setting * @sk_type: socket type (%SOCK_STREAM, etc) * @sk_protocol: which protocol this socket belongs in this network family + * @sk_peer_lock: lock protecting @sk_peer_pid and @sk_peer_cred * @sk_peer_pid: &struct pid for this socket's peer * @sk_peer_cred: %SO_PEERCRED setting * @sk_rcvlowat: %SO_RCVLOWAT setting -- cgit v1.2.3 From d8c23ead708b40a16413163f5f93e07fbd4f077d Mon Sep 17 00:00:00 2001 From: Daniel Latypov Date: Wed, 22 Sep 2021 09:39:21 -0700 Subject: kunit: tool: better handling of quasi-bool args (--json, --raw_output) Problem: What does this do? $ kunit.py run --json Well, it runs all the tests and prints test results out as JSON. And next is $ kunit.py run my-test-suite --json This runs just `my-test-suite` and prints results out as JSON. But what about? $ kunit.py run --json my-test-suite This runs all the tests and stores the json results in a "my-test-suite" file. Why: --json, and now --raw_output are actually string flags. They just have a default value. --json in particular takes the name of an output file. It was intended that you'd do $ kunit.py run --json=my_output_file my-test-suite if you ever wanted to specify the value. Workaround: It doesn't seem like there's a way to make https://docs.python.org/3/library/argparse.html only accept arg values after a '='. I believe that `--json` should "just work" regardless of where it is. So this patch automatically rewrites a bare `--json` to `--json=stdout`. That makes the examples above work the same way. Add a regression test that can catch this for --raw_output. Fixes: 6a499c9c42d0 ("kunit: tool: make --raw_output support only showing kunit output") Signed-off-by: Daniel Latypov Tested-by: David Gow Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- tools/testing/kunit/kunit.py | 24 ++++++++++++++++++++++-- tools/testing/kunit/kunit_tool_test.py | 8 ++++++++ 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 5a931456e718..ac35c61f65f5 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -16,7 +16,7 @@ assert sys.version_info >= (3, 7), "Python version is too old" from collections import namedtuple from enum import Enum, auto -from typing import Iterable +from typing import Iterable, Sequence import kunit_config import kunit_json @@ -186,6 +186,26 @@ def run_tests(linux: kunit_kernel.LinuxSourceTree, exec_result.elapsed_time)) return parse_result +# Problem: +# $ kunit.py run --json +# works as one would expect and prints the parsed test results as JSON. +# $ kunit.py run --json suite_name +# would *not* pass suite_name as the filter_glob and print as json. +# argparse will consider it to be another way of writing +# $ kunit.py run --json=suite_name +# i.e. it would run all tests, and dump the json to a `suite_name` file. +# So we hackily automatically rewrite --json => --json=stdout +pseudo_bool_flag_defaults = { + '--json': 'stdout', + '--raw_output': 'kunit', +} +def massage_argv(argv: Sequence[str]) -> Sequence[str]: + def massage_arg(arg: str) -> str: + if arg not in pseudo_bool_flag_defaults: + return arg + return f'{arg}={pseudo_bool_flag_defaults[arg]}' + return list(map(massage_arg, argv)) + def add_common_opts(parser) -> None: parser.add_argument('--build_dir', help='As in the make command, it specifies the build ' @@ -303,7 +323,7 @@ def main(argv, linux=None): help='Specifies the file to read results from.', type=str, nargs='?', metavar='input_file') - cli_args = parser.parse_args(argv) + cli_args = parser.parse_args(massage_argv(argv)) if get_kernel_root_path(): os.chdir(get_kernel_root_path()) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 619c4554cbff..1edcc8373b4e 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -408,6 +408,14 @@ class KUnitMainTest(unittest.TestCase): self.assertNotEqual(call, mock.call(StrContains('Testing complete.'))) self.assertNotEqual(call, mock.call(StrContains(' 0 tests run'))) + def test_run_raw_output_does_not_take_positional_args(self): + # --raw_output is a string flag, but we don't want it to consume + # any positional arguments, only ones after an '=' + self.linux_source_mock.run_kernel = mock.Mock(return_value=[]) + kunit.main(['run', '--raw_output', 'filter_glob'], self.linux_source_mock) + self.linux_source_mock.run_kernel.assert_called_once_with( + args=None, build_dir='.kunit', filter_glob='filter_glob', timeout=300) + def test_exec_timeout(self): timeout = 3453 kunit.main(['exec', '--timeout', str(timeout)], self.linux_source_mock) -- cgit v1.2.3 From f62314b1ced25c58b86e044fc951cd6a1ea234cf Mon Sep 17 00:00:00 2001 From: Xiyu Yang Date: Thu, 9 Sep 2021 15:24:36 +0800 Subject: kunit: fix reference count leak in kfree_at_end The reference counting issue happens in the normal path of kfree_at_end(). When kunit_alloc_and_get_resource() is invoked, the function forgets to handle the returned resource object, whose refcount increased inside, causing a refcount leak. Fix this issue by calling kunit_alloc_resource() instead of kunit_alloc_and_get_resource(). Fixed the following when applying: Shuah Khan CHECK: Alignment should match open parenthesis + kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL, (void *)to_free); Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Reviewed-by: Daniel Latypov Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- lib/kunit/executor_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c index cdbe54b16501..e14a18af573d 100644 --- a/lib/kunit/executor_test.c +++ b/lib/kunit/executor_test.c @@ -116,8 +116,8 @@ static void kfree_at_end(struct kunit *test, const void *to_free) /* kfree() handles NULL already, but avoid allocating a no-op cleanup. */ if (IS_ERR_OR_NULL(to_free)) return; - kunit_alloc_and_get_resource(test, NULL, kfree_res_free, GFP_KERNEL, - (void *)to_free); + kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL, + (void *)to_free); } static struct kunit_suite *alloc_fake_suite(struct kunit *test, -- cgit v1.2.3 From 654e9c18dfab02c8e5f9c5877c7a2f3264fa520a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 26 Sep 2021 11:56:58 -0700 Subject: drm/msm: Fix crash on dev file close If the device file was opened prior to fw being available (such as from initrd before rootfs is mounted, when the initrd does not contain GPU fw), that would cause a later crash when the dev file is closed due to unitialized submitqueues list: CPU: 4 PID: 263 Comm: plymouthd Tainted: G W 5.15.0-rc2-next-20210924 #2 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_submitqueue_close+0x30/0x190 [msm] lr : msm_postclose+0x54/0xf0 [msm] sp : ffff80001074bb80 x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0 x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800 x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788 x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88 x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000 x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878 x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000 Call trace: msm_submitqueue_close+0x30/0x190 [msm] msm_postclose+0x54/0xf0 [msm] drm_file_free.part.0+0x1cc/0x2e0 [drm] drm_close_helper.isra.0+0x74/0x84 [drm] drm_release+0x78/0x120 [drm] __fput+0x78/0x23c ____fput+0x1c/0x30 task_work_run+0xcc/0x22c do_exit+0x304/0x9f4 do_group_exit+0x44/0xb0 __wake_up_parent+0x0/0x3c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x4c/0xf4 do_el0_svc+0x30/0x9c el0_svc+0x20/0x60 el0t_64_sync_handler+0xe8/0xf0 el0t_64_sync+0x1a0/0x1a4 Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674) ---[ end trace 39b2fa37509a2be2 ]--- Fixing recursive fault but reboot is needed! Fixes: 86c2a0f000c1 drm/msm: ("Small submitqueue creation cleanup") Reported-by: Steev Klimaszewski Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 3 +++ drivers/gpu/drm/msm/msm_submitqueue.c | 4 ---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 2e6fc185e54d..6176519d8bb0 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -689,6 +689,9 @@ static int context_init(struct drm_device *dev, struct drm_file *file) if (!ctx) return -ENOMEM; + INIT_LIST_HEAD(&ctx->submitqueues); + rwlock_init(&ctx->queuelock); + kref_init(&ctx->ref); msm_submitqueue_init(dev, ctx); diff --git a/drivers/gpu/drm/msm/msm_submitqueue.c b/drivers/gpu/drm/msm/msm_submitqueue.c index 32a55d81b58b..7ce0771b5582 100644 --- a/drivers/gpu/drm/msm/msm_submitqueue.c +++ b/drivers/gpu/drm/msm/msm_submitqueue.c @@ -140,10 +140,6 @@ int msm_submitqueue_init(struct drm_device *drm, struct msm_file_private *ctx) */ default_prio = DIV_ROUND_UP(max_priority, 2); - INIT_LIST_HEAD(&ctx->submitqueues); - - rwlock_init(&ctx->queuelock); - return msm_submitqueue_create(drm, ctx, default_prio, 0, NULL); } -- cgit v1.2.3 From f6f59072e821901d96c791864a07d57d8ec8d312 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 27 Sep 2021 11:00:04 -0700 Subject: drm/msm/a6xx: Serialize GMU communication I've seen some crashes in our crash reporting that *look* like multiple threads stomping on each other while communicating with GMU. So wrap all those paths in a lock. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 6 ++++++ drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 3 +++ drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 40 +++++++++++++++++++++++++++++------ 3 files changed, 43 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index a7c58018959f..8b73f70766a4 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -296,6 +296,8 @@ int a6xx_gmu_set_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state) u32 val; int request, ack; + WARN_ON_ONCE(!mutex_is_locked(&gmu->lock)); + if (state >= ARRAY_SIZE(a6xx_gmu_oob_bits)) return -EINVAL; @@ -337,6 +339,8 @@ void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state) { int bit; + WARN_ON_ONCE(!mutex_is_locked(&gmu->lock)); + if (state >= ARRAY_SIZE(a6xx_gmu_oob_bits)) return; @@ -1482,6 +1486,8 @@ int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) if (!pdev) return -ENODEV; + mutex_init(&gmu->lock); + gmu->dev = &pdev->dev; of_dma_configure(gmu->dev, node, true); diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h index 3c74f64e3126..84bd516f01e8 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h @@ -44,6 +44,9 @@ struct a6xx_gmu_bo { struct a6xx_gmu { struct device *dev; + /* For serializing communication with the GMU: */ + struct mutex lock; + struct msm_gem_address_space *aspace; void * __iomem mmio; diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 40c9fef457a4..cd68cfb08446 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -881,7 +881,7 @@ static int a6xx_zap_shader_init(struct msm_gpu *gpu) A6XX_RBBM_INT_0_MASK_UCHE_OOB_ACCESS | \ A6XX_RBBM_INT_0_MASK_UCHE_TRAP_INTR) -static int a6xx_hw_init(struct msm_gpu *gpu) +static int hw_init(struct msm_gpu *gpu) { struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); @@ -1135,6 +1135,19 @@ out: return ret; } +static int a6xx_hw_init(struct msm_gpu *gpu) +{ + struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); + struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); + int ret; + + mutex_lock(&a6xx_gpu->gmu.lock); + ret = hw_init(gpu); + mutex_unlock(&a6xx_gpu->gmu.lock); + + return ret; +} + static void a6xx_dump(struct msm_gpu *gpu) { DRM_DEV_INFO(&gpu->pdev->dev, "status: %08x\n", @@ -1509,7 +1522,9 @@ static int a6xx_pm_resume(struct msm_gpu *gpu) trace_msm_gpu_resume(0); + mutex_lock(&a6xx_gpu->gmu.lock); ret = a6xx_gmu_resume(a6xx_gpu); + mutex_unlock(&a6xx_gpu->gmu.lock); if (ret) return ret; @@ -1532,7 +1547,9 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu) msm_devfreq_suspend(gpu); + mutex_lock(&a6xx_gpu->gmu.lock); ret = a6xx_gmu_stop(a6xx_gpu); + mutex_unlock(&a6xx_gpu->gmu.lock); if (ret) return ret; @@ -1547,18 +1564,19 @@ static int a6xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value) { struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); - static DEFINE_MUTEX(perfcounter_oob); - mutex_lock(&perfcounter_oob); + mutex_lock(&a6xx_gpu->gmu.lock); /* Force the GPU power on so we can read this register */ a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_PERFCOUNTER_SET); *value = gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO, - REG_A6XX_CP_ALWAYS_ON_COUNTER_HI); + REG_A6XX_CP_ALWAYS_ON_COUNTER_HI); a6xx_gmu_clear_oob(&a6xx_gpu->gmu, GMU_OOB_PERFCOUNTER_SET); - mutex_unlock(&perfcounter_oob); + + mutex_unlock(&a6xx_gpu->gmu.lock); + return 0; } @@ -1622,6 +1640,16 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu) return (unsigned long)busy_time; } +void a6xx_gpu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp) +{ + struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); + struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); + + mutex_lock(&a6xx_gpu->gmu.lock); + a6xx_gmu_set_freq(gpu, opp); + mutex_unlock(&a6xx_gpu->gmu.lock); +} + static struct msm_gem_address_space * a6xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev) { @@ -1766,7 +1794,7 @@ static const struct adreno_gpu_funcs funcs = { #endif .gpu_busy = a6xx_gpu_busy, .gpu_get_freq = a6xx_gmu_get_freq, - .gpu_set_freq = a6xx_gmu_set_freq, + .gpu_set_freq = a6xx_gpu_set_freq, #if defined(CONFIG_DRM_MSM_GPU_STATE) .gpu_state_get = a6xx_gpu_state_get, .gpu_state_put = a6xx_gpu_state_put, -- cgit v1.2.3 From 14eb0cb4e9a7323c8735cf6c681ed8423ce6ae06 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 30 Sep 2021 10:43:20 -0700 Subject: drm/msm/a6xx: Track current ctx by seqno In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 11 ++++++++++- drivers/gpu/drm/msm/msm_drv.c | 3 +++ drivers/gpu/drm/msm/msm_drv.h | 1 + 4 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index cd68cfb08446..33da25b81615 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -106,7 +106,7 @@ static void a6xx_set_pagetable(struct a6xx_gpu *a6xx_gpu, u32 asid; u64 memptr = rbmemptr(ring, ttbr0); - if (ctx == a6xx_gpu->cur_ctx) + if (ctx->seqno == a6xx_gpu->cur_ctx_seqno) return; if (msm_iommu_pagetable_params(ctx->aspace->mmu, &ttbr, &asid)) @@ -139,7 +139,7 @@ static void a6xx_set_pagetable(struct a6xx_gpu *a6xx_gpu, OUT_PKT7(ring, CP_EVENT_WRITE, 1); OUT_RING(ring, 0x31); - a6xx_gpu->cur_ctx = ctx; + a6xx_gpu->cur_ctx_seqno = ctx->seqno; } static void a6xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit) @@ -1081,7 +1081,7 @@ static int hw_init(struct msm_gpu *gpu) /* Always come up on rb 0 */ a6xx_gpu->cur_ring = gpu->rb[0]; - a6xx_gpu->cur_ctx = NULL; + a6xx_gpu->cur_ctx_seqno = 0; /* Enable the SQE_to start the CP engine */ gpu_write(gpu, REG_A6XX_CP_SQE_CNTL, 1); diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h index 0bc2d062f54a..8e5527c881b1 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h @@ -19,7 +19,16 @@ struct a6xx_gpu { uint64_t sqe_iova; struct msm_ringbuffer *cur_ring; - struct msm_file_private *cur_ctx; + + /** + * cur_ctx_seqno: + * + * The ctx->seqno value of the context with current pgtables + * installed. Tracked by seqno rather than pointer value to + * avoid dangling pointers, and cases where a ctx can be freed + * and a new one created with the same address. + */ + int cur_ctx_seqno; struct a6xx_gmu gmu; diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 6176519d8bb0..4443d7b48618 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -682,6 +682,7 @@ static void load_gpu(struct drm_device *dev) static int context_init(struct drm_device *dev, struct drm_file *file) { + static atomic_t ident = ATOMIC_INIT(0); struct msm_drm_private *priv = dev->dev_private; struct msm_file_private *ctx; @@ -698,6 +699,8 @@ static int context_init(struct drm_device *dev, struct drm_file *file) ctx->aspace = msm_gpu_create_private_address_space(priv->gpu, current); file->driver_priv = ctx; + ctx->seqno = atomic_inc_return(&ident); + return 0; } diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index 8b005d1ac899..a0340607984a 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -59,6 +59,7 @@ struct msm_file_private { int queueid; struct msm_gem_address_space *aspace; struct kref ref; + int seqno; }; enum msm_mdp_plane_property { -- cgit v1.2.3 From 4cd82aa39bda20a9237b8f42676796d0a5ee9bfc Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 1 Oct 2021 08:58:15 -0700 Subject: drm/msm: A bit more docs + cleanup msm_file_private is more gpu related, and in the next commit it will need access to other GPU specific #defines. While we're at it, add some comments. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.h | 44 -------------------------------- drivers/gpu/drm/msm/msm_gpu.h | 58 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 57 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index a0340607984a..e99242164076 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -53,15 +53,6 @@ struct msm_disp_state; #define FRAC_16_16(mult, div) (((mult) << 16) / (div)) -struct msm_file_private { - rwlock_t queuelock; - struct list_head submitqueues; - int queueid; - struct msm_gem_address_space *aspace; - struct kref ref; - int seqno; -}; - enum msm_mdp_plane_property { PLANE_PROP_ZPOS, PLANE_PROP_ALPHA, @@ -489,41 +480,6 @@ void msm_writel(u32 data, void __iomem *addr); u32 msm_readl(const void __iomem *addr); void msm_rmw(void __iomem *addr, u32 mask, u32 or); -struct msm_gpu_submitqueue; -int msm_submitqueue_init(struct drm_device *drm, struct msm_file_private *ctx); -struct msm_gpu_submitqueue *msm_submitqueue_get(struct msm_file_private *ctx, - u32 id); -int msm_submitqueue_create(struct drm_device *drm, - struct msm_file_private *ctx, - u32 prio, u32 flags, u32 *id); -int msm_submitqueue_query(struct drm_device *drm, struct msm_file_private *ctx, - struct drm_msm_submitqueue_query *args); -int msm_submitqueue_remove(struct msm_file_private *ctx, u32 id); -void msm_submitqueue_close(struct msm_file_private *ctx); - -void msm_submitqueue_destroy(struct kref *kref); - -static inline void __msm_file_private_destroy(struct kref *kref) -{ - struct msm_file_private *ctx = container_of(kref, - struct msm_file_private, ref); - - msm_gem_address_space_put(ctx->aspace); - kfree(ctx); -} - -static inline void msm_file_private_put(struct msm_file_private *ctx) -{ - kref_put(&ctx->ref, __msm_file_private_destroy); -} - -static inline struct msm_file_private *msm_file_private_get( - struct msm_file_private *ctx) -{ - kref_get(&ctx->ref); - return ctx; -} - #define DBG(fmt, ...) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__) #define VERB(fmt, ...) if (0) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__) diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h index 0e4b45bff2e6..42f85c523cfe 100644 --- a/drivers/gpu/drm/msm/msm_gpu.h +++ b/drivers/gpu/drm/msm/msm_gpu.h @@ -257,6 +257,26 @@ struct msm_gpu_perfcntr { */ #define NR_SCHED_PRIORITIES (1 + DRM_SCHED_PRIORITY_HIGH - DRM_SCHED_PRIORITY_MIN) +/** + * struct msm_file_private - per-drm_file context + * + * @queuelock: synchronizes access to submitqueues list + * @submitqueues: list of &msm_gpu_submitqueue created by userspace + * @queueid: counter incremented each time a submitqueue is created, + * used to assign &msm_gpu_submitqueue.id + * @aspace: the per-process GPU address-space + * @ref: reference count + * @seqno: unique per process seqno + */ +struct msm_file_private { + rwlock_t queuelock; + struct list_head submitqueues; + int queueid; + struct msm_gem_address_space *aspace; + struct kref ref; + int seqno; +}; + /** * msm_gpu_convert_priority - Map userspace priority to ring # and sched priority * @@ -304,6 +324,8 @@ static inline int msm_gpu_convert_priority(struct msm_gpu *gpu, int prio, } /** + * struct msm_gpu_submitqueues - Userspace created context. + * * A submitqueue is associated with a gl context or vk queue (or equiv) * in userspace. * @@ -321,7 +343,7 @@ static inline int msm_gpu_convert_priority(struct msm_gpu *gpu, int prio, * seqno, protected by submitqueue lock * @lock: submitqueue lock * @ref: reference count - * @entity: the submit job-queue + * @entity: the submit job-queue */ struct msm_gpu_submitqueue { int id; @@ -421,6 +443,40 @@ static inline void gpu_write64(struct msm_gpu *gpu, u32 lo, u32 hi, u64 val) int msm_gpu_pm_suspend(struct msm_gpu *gpu); int msm_gpu_pm_resume(struct msm_gpu *gpu); +int msm_submitqueue_init(struct drm_device *drm, struct msm_file_private *ctx); +struct msm_gpu_submitqueue *msm_submitqueue_get(struct msm_file_private *ctx, + u32 id); +int msm_submitqueue_create(struct drm_device *drm, + struct msm_file_private *ctx, + u32 prio, u32 flags, u32 *id); +int msm_submitqueue_query(struct drm_device *drm, struct msm_file_private *ctx, + struct drm_msm_submitqueue_query *args); +int msm_submitqueue_remove(struct msm_file_private *ctx, u32 id); +void msm_submitqueue_close(struct msm_file_private *ctx); + +void msm_submitqueue_destroy(struct kref *kref); + +static inline void __msm_file_private_destroy(struct kref *kref) +{ + struct msm_file_private *ctx = container_of(kref, + struct msm_file_private, ref); + + msm_gem_address_space_put(ctx->aspace); + kfree(ctx); +} + +static inline void msm_file_private_put(struct msm_file_private *ctx) +{ + kref_put(&ctx->ref, __msm_file_private_destroy); +} + +static inline struct msm_file_private *msm_file_private_get( + struct msm_file_private *ctx) +{ + kref_get(&ctx->ref); + return ctx; +} + void msm_devfreq_init(struct msm_gpu *gpu); void msm_devfreq_cleanup(struct msm_gpu *gpu); void msm_devfreq_resume(struct msm_gpu *gpu); -- cgit v1.2.3 From 68002469e571ae3db095e4ade1cfef64903f8fa1 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 1 Oct 2021 09:42:05 -0700 Subject: drm/msm: One sched entity per process per priority Some userspace apps make assumptions that rendering against multiple contexts within the same process (from the same thread, with appropriate MakeCurrent() calls) provides sufficient synchronization without any external synchronization (ie. glFenceSync()/glWaitSync()). Since a submitqueue maps to a gl/vk context, having multiple sched entities of the same priority only works with implicit sync enabled. To fix this, limit things to a single sched entity per priority level per process. An alternative would be sharing submitqueues between contexts in userspace, but tracking of per-context faults (ie. GL_EXT_robustness) is already done at the submitqueue level, so this is not an option. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 4 +-- drivers/gpu/drm/msm/msm_gpu.h | 24 ++++++++----- drivers/gpu/drm/msm/msm_submitqueue.c | 68 +++++++++++++++++++++++++++++------ 3 files changed, 75 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index fdc5367aecaa..7e0f6571cbca 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -46,7 +46,7 @@ static struct msm_gem_submit *submit_create(struct drm_device *dev, if (!submit) return ERR_PTR(-ENOMEM); - ret = drm_sched_job_init(&submit->base, &queue->entity, queue); + ret = drm_sched_job_init(&submit->base, queue->entity, queue); if (ret) { kfree(submit); return ERR_PTR(ret); @@ -907,7 +907,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data, /* The scheduler owns a ref now: */ msm_gem_submit_get(submit); - drm_sched_entity_push_job(&submit->base, &queue->entity); + drm_sched_entity_push_job(&submit->base, queue->entity); args->fence = submit->fence_id; diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h index 42f85c523cfe..030f82f149c2 100644 --- a/drivers/gpu/drm/msm/msm_gpu.h +++ b/drivers/gpu/drm/msm/msm_gpu.h @@ -275,6 +275,19 @@ struct msm_file_private { struct msm_gem_address_space *aspace; struct kref ref; int seqno; + + /** + * entities: + * + * Table of per-priority-level sched entities used by submitqueues + * associated with this &drm_file. Because some userspace apps + * make assumptions about rendering from multiple gl contexts + * (of the same priority) within the process happening in FIFO + * order without requiring any fencing beyond MakeCurrent(), we + * create at most one &drm_sched_entity per-process per-priority- + * level. + */ + struct drm_sched_entity *entities[NR_SCHED_PRIORITIES * MSM_GPU_MAX_RINGS]; }; /** @@ -355,7 +368,7 @@ struct msm_gpu_submitqueue { struct idr fence_idr; struct mutex lock; struct kref ref; - struct drm_sched_entity entity; + struct drm_sched_entity *entity; }; struct msm_gpu_state_bo { @@ -456,14 +469,7 @@ void msm_submitqueue_close(struct msm_file_private *ctx); void msm_submitqueue_destroy(struct kref *kref); -static inline void __msm_file_private_destroy(struct kref *kref) -{ - struct msm_file_private *ctx = container_of(kref, - struct msm_file_private, ref); - - msm_gem_address_space_put(ctx->aspace); - kfree(ctx); -} +void __msm_file_private_destroy(struct kref *kref); static inline void msm_file_private_put(struct msm_file_private *ctx) { diff --git a/drivers/gpu/drm/msm/msm_submitqueue.c b/drivers/gpu/drm/msm/msm_submitqueue.c index 7ce0771b5582..b8621c6e0554 100644 --- a/drivers/gpu/drm/msm/msm_submitqueue.c +++ b/drivers/gpu/drm/msm/msm_submitqueue.c @@ -7,6 +7,24 @@ #include "msm_gpu.h" +void __msm_file_private_destroy(struct kref *kref) +{ + struct msm_file_private *ctx = container_of(kref, + struct msm_file_private, ref); + int i; + + for (i = 0; i < ARRAY_SIZE(ctx->entities); i++) { + if (!ctx->entities[i]) + continue; + + drm_sched_entity_destroy(ctx->entities[i]); + kfree(ctx->entities[i]); + } + + msm_gem_address_space_put(ctx->aspace); + kfree(ctx); +} + void msm_submitqueue_destroy(struct kref *kref) { struct msm_gpu_submitqueue *queue = container_of(kref, @@ -14,8 +32,6 @@ void msm_submitqueue_destroy(struct kref *kref) idr_destroy(&queue->fence_idr); - drm_sched_entity_destroy(&queue->entity); - msm_file_private_put(queue->ctx); kfree(queue); @@ -61,13 +77,47 @@ void msm_submitqueue_close(struct msm_file_private *ctx) } } +static struct drm_sched_entity * +get_sched_entity(struct msm_file_private *ctx, struct msm_ringbuffer *ring, + unsigned ring_nr, enum drm_sched_priority sched_prio) +{ + static DEFINE_MUTEX(entity_lock); + unsigned idx = (ring_nr * NR_SCHED_PRIORITIES) + sched_prio; + + /* We should have already validated that the requested priority is + * valid by the time we get here. + */ + if (WARN_ON(idx >= ARRAY_SIZE(ctx->entities))) + return ERR_PTR(-EINVAL); + + mutex_lock(&entity_lock); + + if (!ctx->entities[idx]) { + struct drm_sched_entity *entity; + struct drm_gpu_scheduler *sched = &ring->sched; + int ret; + + entity = kzalloc(sizeof(*ctx->entities[idx]), GFP_KERNEL); + + ret = drm_sched_entity_init(entity, sched_prio, &sched, 1, NULL); + if (ret) { + kfree(entity); + return ERR_PTR(ret); + } + + ctx->entities[idx] = entity; + } + + mutex_unlock(&entity_lock); + + return ctx->entities[idx]; +} + int msm_submitqueue_create(struct drm_device *drm, struct msm_file_private *ctx, u32 prio, u32 flags, u32 *id) { struct msm_drm_private *priv = drm->dev_private; struct msm_gpu_submitqueue *queue; - struct msm_ringbuffer *ring; - struct drm_gpu_scheduler *sched; enum drm_sched_priority sched_prio; unsigned ring_nr; int ret; @@ -91,12 +141,10 @@ int msm_submitqueue_create(struct drm_device *drm, struct msm_file_private *ctx, queue->flags = flags; queue->ring_nr = ring_nr; - ring = priv->gpu->rb[ring_nr]; - sched = &ring->sched; - - ret = drm_sched_entity_init(&queue->entity, - sched_prio, &sched, 1, NULL); - if (ret) { + queue->entity = get_sched_entity(ctx, priv->gpu->rb[ring_nr], + ring_nr, sched_prio); + if (IS_ERR(queue->entity)) { + ret = PTR_ERR(queue->entity); kfree(queue); return ret; } -- cgit v1.2.3 From b0e875bac0fab3e7a7431c2eee36a8ccc0c712ac Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Fri, 1 Oct 2021 11:59:10 -0700 Subject: libbpf: Fix memory leak in strset Free struct strset itself, not just its internal parts. Fixes: 90d76d3ececc ("libbpf: Extract internal set-of-strings datastructure APIs") Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20211001185910.86492-1-andrii@kernel.org --- tools/lib/bpf/strset.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/lib/bpf/strset.c b/tools/lib/bpf/strset.c index 1fb8b49de1d6..ea655318153f 100644 --- a/tools/lib/bpf/strset.c +++ b/tools/lib/bpf/strset.c @@ -88,6 +88,7 @@ void strset__free(struct strset *set) hashmap__free(set->strs_hash); free(set->strs_data); + free(set); } size_t strset__data_size(const struct strset *set) -- cgit v1.2.3 From 95c58291ee709424557996891926a05a32c5b13a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 13:36:23 +0200 Subject: drm/msm/submit: fix overflow check on 64-bit architectures The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by: Arnd Bergmann Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 7e0f6571cbca..151d19e4453c 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -171,7 +171,8 @@ out: static int submit_lookup_cmds(struct msm_gem_submit *submit, struct drm_msm_gem_submit *args, struct drm_file *file) { - unsigned i, sz; + unsigned i; + size_t sz; int ret = 0; for (i = 0; i < args->nr_cmds; i++) { -- cgit v1.2.3 From 560ee196fe9e5037e5015e2cdb14b3aecb1cd7dc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 30 Sep 2021 14:22:39 -0700 Subject: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: fb0305ce1b03 ("net-sched: consolidate default fifo qdisc setup") Signed-off-by: Eric Dumazet Reported-by: syzbot Link: https://lore.kernel.org/r/20210930212239.3430364-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- net/sched/sch_fifo.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c index a579a4131d22..e1040421b797 100644 --- a/net/sched/sch_fifo.c +++ b/net/sched/sch_fifo.c @@ -233,6 +233,9 @@ int fifo_set_limit(struct Qdisc *q, unsigned int limit) if (strncmp(q->ops->id + 1, "fifo", 4) != 0) return 0; + if (!q->ops->change) + return 0; + nla = kmalloc(nla_attr_size(sizeof(struct tc_fifo_qopt)), GFP_KERNEL); if (nla) { nla->nla_type = RTM_NEWQDISC; -- cgit v1.2.3 From 019d9329e7481cfaccbd8ed17b1e04ca76970f13 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 30 Sep 2021 15:53:30 +0300 Subject: net: mscc: ocelot: fix VCAP filters remaining active after being deleted When ocelot_flower.c calls ocelot_vcap_filter_add(), the filter has a given filter->id.cookie. This filter is added to the block->rules list. However, when ocelot_flower.c calls ocelot_vcap_block_find_filter_by_id() which passes the cookie as argument, the filter is never found by filter->id.cookie when searching through the block->rules list. This is unsurprising, since the filter->id.cookie is an unsigned long, but the cookie argument provided to ocelot_vcap_block_find_filter_by_id() is a signed int, and the comparison fails. Fixes: 50c6cc5b9283 ("net: mscc: ocelot: store a namespaced VCAP filter ID") Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20210930125330.2078625-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot_vcap.c | 4 ++-- include/soc/mscc/ocelot_vcap.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot_vcap.c b/drivers/net/ethernet/mscc/ocelot_vcap.c index 7945393a0655..99d7376a70a7 100644 --- a/drivers/net/ethernet/mscc/ocelot_vcap.c +++ b/drivers/net/ethernet/mscc/ocelot_vcap.c @@ -998,8 +998,8 @@ ocelot_vcap_block_find_filter_by_index(struct ocelot_vcap_block *block, } struct ocelot_vcap_filter * -ocelot_vcap_block_find_filter_by_id(struct ocelot_vcap_block *block, int cookie, - bool tc_offload) +ocelot_vcap_block_find_filter_by_id(struct ocelot_vcap_block *block, + unsigned long cookie, bool tc_offload) { struct ocelot_vcap_filter *filter; diff --git a/include/soc/mscc/ocelot_vcap.h b/include/soc/mscc/ocelot_vcap.h index 25fd525aaf92..4869ebbd438d 100644 --- a/include/soc/mscc/ocelot_vcap.h +++ b/include/soc/mscc/ocelot_vcap.h @@ -694,7 +694,7 @@ int ocelot_vcap_filter_add(struct ocelot *ocelot, int ocelot_vcap_filter_del(struct ocelot *ocelot, struct ocelot_vcap_filter *rule); struct ocelot_vcap_filter * -ocelot_vcap_block_find_filter_by_id(struct ocelot_vcap_block *block, int id, - bool tc_offload); +ocelot_vcap_block_find_filter_by_id(struct ocelot_vcap_block *block, + unsigned long cookie, bool tc_offload); #endif /* _OCELOT_VCAP_H_ */ -- cgit v1.2.3 From aec3f415f7244b7747a7952596971adb0df2f568 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Wed, 29 Sep 2021 22:50:49 +0900 Subject: net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devices Commit 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings") while getting rid of a runtime PM warning ended up breaking ethernet on rk3399 based devices. By dropping an extra reference to the device, the commit ends up enabling suspend / resume of the ethernet device - which appears to be broken. While the issue with runtime pm is being investigated, partially revert commit 2d26f6e39afb to restore the network on rk3399. Fixes: 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings") Suggested-by: Heiko Stuebner Signed-off-by: Punit Agrawal Cc: Michael Riesch Tested-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210929135049.3426058-1-punitagrawal@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index ed817011a94a..6924a6aacbd5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "stmmac_platform.h" @@ -1528,6 +1529,8 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv) return ret; } + pm_runtime_get_sync(dev); + if (bsp_priv->integrated_phy) rk_gmac_integrated_phy_powerup(bsp_priv); @@ -1539,6 +1542,8 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac) if (gmac->integrated_phy) rk_gmac_integrated_phy_powerdown(gmac); + pm_runtime_put_sync(&gmac->pdev->dev); + phy_power_on(gmac, false); gmac_clk_enable(gmac, false); } -- cgit v1.2.3 From 5cfe5109a1d7fd9686d5c695827216788bf0b1ec Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Thu, 30 Sep 2021 08:12:43 +0300 Subject: MAINTAINERS: Remove Bin Luo as his email bounces The emails sent to luobin9@huawei.com bounce with error: "Recipient address rejected: Failed recipient validation check." So let's remove his entry and change the status of hinic driver till someone in Huawei will step-in to maintain it again. Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/045a32ccf394de66b7899c8b732f44dc5f4a1154.1632978665.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1bd60368fb3e..6fbedd4784a3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8608,9 +8608,8 @@ F: Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml F: drivers/iio/humidity/hts221* HUAWEI ETHERNET DRIVER -M: Bin Luo L: netdev@vger.kernel.org -S: Supported +S: Orphan F: Documentation/networking/device_drivers/ethernet/huawei/hinic.rst F: drivers/net/ethernet/huawei/hinic/ -- cgit v1.2.3 From 55442e6af03434c500541782f01730a89162eb27 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 19 Aug 2021 19:14:57 -0500 Subject: dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings The graph schema doesn't allow custom properties on endpoint nodes for '#/properties/port' and '#/$defs/port-base' should be used instead. This doesn't matter until 'unevaluatedProperties' support is implemented. Cc: Dave Stevenson Cc: Jacopo Mondi Cc: Mauro Carvalho Chehab Cc: "Paul J. Murphy" Cc: Daniele Alessandrelli Cc: linux-media@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Daniele Alessandrelli Link: https://lore.kernel.org/r/20210820001457.1705142-1-robh@kernel.org --- Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml | 2 +- Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml | 2 +- Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml | 2 +- Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml index 3e5d82df90a2..a2abed06a099 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml index ad42992c6da3..bf115ab9d926 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml index 881f79532501..cf2ca2702cc9 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml index 1edeabf39e6a..afcf70947f7e 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -38,7 +38,7 @@ properties: port: additionalProperties: false - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: -- cgit v1.2.3 From 67006e30e27e80fd9403a91ae3c0c85391c6c2cc Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 28 Sep 2021 17:29:20 -0500 Subject: dt-bindings: Drop more redundant 'maxItems/minItems' Another round of removing redundant minItems/maxItems from new schema in the recent merge window. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Evgeniy Polyakov Cc: Marek Vasut Cc: Joakim Zhang Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20210928222920.2204761-1-robh@kernel.org --- Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 2 -- Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml | 4 +--- Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml | 1 - Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 - 4 files changed, 1 insertion(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index 07b20383cbca..b446d0f0f1b4 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -50,7 +50,6 @@ properties: data-lanes: description: array of physical DSI data lane indexes. minItems: 1 - maxItems: 4 items: - const: 1 - const: 2 @@ -71,7 +70,6 @@ properties: data-lanes: description: array of physical DSI data lane indexes. minItems: 1 - maxItems: 4 items: - const: 1 - const: 2 diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index e6c9a2f77cc7..f300ced4cdf3 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -20,9 +20,7 @@ properties: - snps,dwcmshc-sdhci reg: - minItems: 1 - items: - - description: Offset and length of the register set for the device + maxItems: 1 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 5629b2e4ccf8..ee4afe361fac 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -34,7 +34,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: MAC host clock - description: MAC apb clock diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2911e565b260..acea1cd444fd 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -41,7 +41,6 @@ properties: - description: builtin MSI controller. interrupt-names: - minItems: 1 items: - const: msi -- cgit v1.2.3 From 67a12ae52599c9f2f24ef14adb43fc3b164792b5 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Fri, 1 Oct 2021 23:27:26 +0200 Subject: spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround In commit 7e71b85473f8 ("arm64: dts: ls1028a: fix node name for the sysclk") the sysclk node name was renamed and broke the erratum workaround because it tries to fetch a device tree node by its name, which is very fragile in general. We don't even need the sysclk node because the only possible sysclk frequency input is 100MHz. In fact, the erratum says it applies if SYS_PLL_RAT is 3, not that the platform clock is 300 MHz. Make the workaround more reliable and just drop the unneeded sysclk lookup. For reference, the error during the bootup is the following: [ 4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read via IP bus may not work Fixes: 82ce7d0e74b6 ("spi: spi-nxp-fspi: Implement errata workaround for LS1028A") Cc: Vladimir Oltean Signed-off-by: Michael Walle Link: https://lore.kernel.org/r/20211001212726.159437-1-michael@walle.cc Signed-off-by: Mark Brown --- drivers/spi/spi-nxp-fspi.c | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index a66fa97046ee..2b0301fc971c 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -315,6 +316,7 @@ #define NXP_FSPI_MIN_IOMAP SZ_4M #define DCFG_RCWSR1 0x100 +#define SYS_PLL_RAT GENMASK(6, 2) /* Access flash memory using IP bus only */ #define FSPI_QUIRK_USE_IP_ONLY BIT(0) @@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi *f) { .family = "QorIQ LS1028A" }, { /* sentinel */ } }; - struct device_node *np; struct regmap *map; - u32 val = 0, sysclk = 0; + u32 val, sys_pll_ratio; int ret; /* Check for LS1028A family */ @@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi *f) return; } - /* Compute system clock frequency multiplier ratio */ map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg"); if (IS_ERR(map)) { dev_err(f->dev, "No syscon regmap\n"); @@ -948,23 +948,11 @@ static void erratum_err050568(struct nxp_fspi *f) if (ret < 0) goto err; - /* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier ratio */ - val = (val >> 2) & 0x1F; - WARN(val == 0, "Strapping is zero: Cannot determine ratio"); + sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val); + dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val, sys_pll_ratio); - /* Compute system clock frequency */ - np = of_find_node_by_name(NULL, "clock-sysclk"); - if (!np) - goto err; - - if (of_property_read_u32(np, "clock-frequency", &sysclk)) - goto err; - - sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */ - dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk); - - /* Use IP bus only if PLL is 300MHz */ - if (sysclk == 300) + /* Use IP bus only if platform clock is 300MHz */ + if (sys_pll_ratio == 3) f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY; return; -- cgit v1.2.3 From 6558b646ce1c2a872fe1c2c7cb116f05a2c1950f Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Wed, 22 Sep 2021 17:57:18 +0100 Subject: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Signed-off-by: Jamie Iles Acked-by: Mika Westerberg [wsa: fixed title] Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index aaeeacc12121..546cc935e035 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -454,6 +454,7 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; i2c_acpi_register_device(adapter, adev, &info); + put_device(&adapter->dev); break; case ACPI_RECONFIG_DEVICE_REMOVE: if (!acpi_device_enumerated(adev)) -- cgit v1.2.3 From 3bce7703c7ba648bd9e174dc1413f422b7998833 Mon Sep 17 00:00:00 2001 From: Kewei Xu Date: Fri, 17 Sep 2021 18:14:14 +0800 Subject: i2c: mediatek: Add OFFSET_EXT_CONF setting back In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support"), we miss setting OFFSET_EXT_CONF register if i2c->dev_comp->timing_adjust is false, now add it back. Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support") Signed-off-by: Kewei Xu Reviewed-by: Qii Wang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 477480d1de6b..7d4b3eb7077a 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -41,6 +41,8 @@ #define I2C_HANDSHAKE_RST 0x0020 #define I2C_FIFO_ADDR_CLR 0x0001 #define I2C_DELAY_LEN 0x0002 +#define I2C_ST_START_CON 0x8001 +#define I2C_FS_START_CON 0x1800 #define I2C_TIME_CLR_VALUE 0x0000 #define I2C_TIME_DEFAULT_VALUE 0x0003 #define I2C_WRRD_TRANAC_VALUE 0x0002 @@ -480,6 +482,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; u16 intr_stat_reg; + u16 ext_conf_val; mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START); intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT); @@ -518,8 +521,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) if (i2c->dev_comp->ltiming_adjust) mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING); + if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ) + ext_conf_val = I2C_ST_START_CON; + else + ext_conf_val = I2C_FS_START_CON; + if (i2c->dev_comp->timing_adjust) { - mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF); + ext_conf_val = i2c->ac_timing.ext; mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div, OFFSET_CLOCK_DIV); mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE, @@ -544,6 +552,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) OFFSET_HS_STA_STO_AC_TIMING); } } + mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF); /* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */ if (i2c->have_pmic) -- cgit v1.2.3 From 740da9d7ca4e25f5d87db9f80d75432681b61305 Mon Sep 17 00:00:00 2001 From: Ilya Lipnitskiy Date: Thu, 30 Sep 2021 09:57:41 -0700 Subject: MIPS: Revert "add support for buggy MT7621S core detection" This reverts commit 6decd1aad15f56b169217789630a0098b496de0e. CPULAUNCH register is not set properly by some bootloaders, causing a regression until a bootloader change is made, which is hard if not impossible on some embedded devices. Revert the change until a more robust core detection mechanism that works on MT7621S routers such as Netgear R6220 as well as platforms like Digi EX15 can be made. Link: https://lore.kernel.org/lkml/4d9e3b39-7caa-d372-5d7b-42dcec36fec7@kernel.org Fixes: 6decd1aad15f ("MIPS: add support for buggy MT7621S core detection") Signed-off-by: Ilya Lipnitskiy Acked-by: Sergio Paracuellos Acked-by: Greg Ungerer Signed-off-by: Thomas Bogendoerfer --- arch/mips/include/asm/mips-cps.h | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) diff --git a/arch/mips/include/asm/mips-cps.h b/arch/mips/include/asm/mips-cps.h index 35fb8ee6dd33..fd43d876892e 100644 --- a/arch/mips/include/asm/mips-cps.h +++ b/arch/mips/include/asm/mips-cps.h @@ -10,8 +10,6 @@ #include #include -#include - extern unsigned long __cps_access_bad_size(void) __compiletime_error("Bad size for CPS accessor"); @@ -167,30 +165,11 @@ static inline uint64_t mips_cps_cluster_config(unsigned int cluster) */ static inline unsigned int mips_cps_numcores(unsigned int cluster) { - unsigned int ncores; - if (!mips_cm_present()) return 0; /* Add one before masking to handle 0xff indicating no cores */ - ncores = (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES; - - if (IS_ENABLED(CONFIG_SOC_MT7621)) { - struct cpulaunch *launch; - - /* - * Ralink MT7621S SoC is single core, but the GCR_CONFIG method - * always reports 2 cores. Check the second core's LAUNCH_FREADY - * flag to detect if the second core is missing. This method - * only works before the core has been started. - */ - launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - launch += 2; /* MT7621 has 2 VPEs per core */ - if (!(launch->flags & LAUNCH_FREADY)) - ncores = 1; - } - - return ncores; + return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES; } /** -- cgit v1.2.3 From 6fb721cf781808ee2ca5e737fb0592cc68de3381 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 26 Sep 2021 09:59:35 +0200 Subject: netfilter: nf_tables: honor NLM_F_CREATE and NLM_F_EXCL in event notification Include the NLM_F_CREATE and NLM_F_EXCL flags in netlink event notifications, otherwise userspace cannot distiguish between create and add commands. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 2 +- net/netfilter/nf_tables_api.c | 47 +++++++++++++++++++++++++++++---------- net/netfilter/nft_quota.c | 2 +- 3 files changed, 37 insertions(+), 14 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 148f5d8ee5ab..a16171c5fd9e 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1202,7 +1202,7 @@ struct nft_object *nft_obj_lookup(const struct net *net, void nft_obj_notify(struct net *net, const struct nft_table *table, struct nft_object *obj, u32 portid, u32 seq, - int event, int family, int report, gfp_t gfp); + int event, u16 flags, int family, int report, gfp_t gfp); /** * struct nft_object_type - stateful object type diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index c8acd26c7201..c0851fec11d4 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -780,6 +780,7 @@ static void nf_tables_table_notify(const struct nft_ctx *ctx, int event) { struct nftables_pernet *nft_net; struct sk_buff *skb; + u16 flags = 0; int err; if (!ctx->report && @@ -790,8 +791,11 @@ static void nf_tables_table_notify(const struct nft_ctx *ctx, int event) if (skb == NULL) goto err; + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); + err = nf_tables_fill_table_info(skb, ctx->net, ctx->portid, ctx->seq, - event, 0, ctx->family, ctx->table); + event, flags, ctx->family, ctx->table); if (err < 0) { kfree_skb(skb); goto err; @@ -1563,6 +1567,7 @@ static void nf_tables_chain_notify(const struct nft_ctx *ctx, int event) { struct nftables_pernet *nft_net; struct sk_buff *skb; + u16 flags = 0; int err; if (!ctx->report && @@ -1573,8 +1578,11 @@ static void nf_tables_chain_notify(const struct nft_ctx *ctx, int event) if (skb == NULL) goto err; + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); + err = nf_tables_fill_chain_info(skb, ctx->net, ctx->portid, ctx->seq, - event, 0, ctx->family, ctx->table, + event, flags, ctx->family, ctx->table, ctx->chain); if (err < 0) { kfree_skb(skb); @@ -2945,6 +2953,8 @@ static void nf_tables_rule_notify(const struct nft_ctx *ctx, } if (ctx->flags & (NLM_F_APPEND | NLM_F_REPLACE)) flags |= NLM_F_APPEND; + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); err = nf_tables_fill_rule_info(skb, ctx->net, ctx->portid, ctx->seq, event, flags, ctx->family, ctx->table, @@ -3957,8 +3967,9 @@ static void nf_tables_set_notify(const struct nft_ctx *ctx, gfp_t gfp_flags) { struct nftables_pernet *nft_net = nft_pernet(ctx->net); - struct sk_buff *skb; u32 portid = ctx->portid; + struct sk_buff *skb; + u16 flags = 0; int err; if (!ctx->report && @@ -3969,7 +3980,10 @@ static void nf_tables_set_notify(const struct nft_ctx *ctx, if (skb == NULL) goto err; - err = nf_tables_fill_set(skb, ctx, set, event, 0); + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); + + err = nf_tables_fill_set(skb, ctx, set, event, flags); if (err < 0) { kfree_skb(skb); goto err; @@ -5245,12 +5259,13 @@ static int nf_tables_getsetelem(struct sk_buff *skb, static void nf_tables_setelem_notify(const struct nft_ctx *ctx, const struct nft_set *set, const struct nft_set_elem *elem, - int event, u16 flags) + int event) { struct nftables_pernet *nft_net; struct net *net = ctx->net; u32 portid = ctx->portid; struct sk_buff *skb; + u16 flags = 0; int err; if (!ctx->report && !nfnetlink_has_listeners(net, NFNLGRP_NFTABLES)) @@ -5260,6 +5275,9 @@ static void nf_tables_setelem_notify(const struct nft_ctx *ctx, if (skb == NULL) goto err; + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); + err = nf_tables_fill_setelem_info(skb, ctx, 0, portid, event, flags, set, elem); if (err < 0) { @@ -6935,7 +6953,7 @@ static int nf_tables_delobj(struct sk_buff *skb, const struct nfnl_info *info, void nft_obj_notify(struct net *net, const struct nft_table *table, struct nft_object *obj, u32 portid, u32 seq, int event, - int family, int report, gfp_t gfp) + u16 flags, int family, int report, gfp_t gfp) { struct nftables_pernet *nft_net = nft_pernet(net); struct sk_buff *skb; @@ -6960,8 +6978,9 @@ void nft_obj_notify(struct net *net, const struct nft_table *table, if (skb == NULL) goto err; - err = nf_tables_fill_obj_info(skb, net, portid, seq, event, 0, family, - table, obj, false); + err = nf_tables_fill_obj_info(skb, net, portid, seq, event, + flags & (NLM_F_CREATE | NLM_F_EXCL), + family, table, obj, false); if (err < 0) { kfree_skb(skb); goto err; @@ -6978,7 +6997,7 @@ static void nf_tables_obj_notify(const struct nft_ctx *ctx, struct nft_object *obj, int event) { nft_obj_notify(ctx->net, ctx->table, obj, ctx->portid, ctx->seq, event, - ctx->family, ctx->report, GFP_KERNEL); + ctx->flags, ctx->family, ctx->report, GFP_KERNEL); } /* @@ -7759,6 +7778,7 @@ static void nf_tables_flowtable_notify(struct nft_ctx *ctx, { struct nftables_pernet *nft_net = nft_pernet(ctx->net); struct sk_buff *skb; + u16 flags = 0; int err; if (!ctx->report && @@ -7769,8 +7789,11 @@ static void nf_tables_flowtable_notify(struct nft_ctx *ctx, if (skb == NULL) goto err; + if (ctx->flags & (NLM_F_CREATE | NLM_F_EXCL)) + flags |= ctx->flags & (NLM_F_CREATE | NLM_F_EXCL); + err = nf_tables_fill_flowtable_info(skb, ctx->net, ctx->portid, - ctx->seq, event, 0, + ctx->seq, event, flags, ctx->family, flowtable, hook_list); if (err < 0) { kfree_skb(skb); @@ -8648,7 +8671,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nft_setelem_activate(net, te->set, &te->elem); nf_tables_setelem_notify(&trans->ctx, te->set, &te->elem, - NFT_MSG_NEWSETELEM, 0); + NFT_MSG_NEWSETELEM); nft_trans_destroy(trans); break; case NFT_MSG_DELSETELEM: @@ -8656,7 +8679,7 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nf_tables_setelem_notify(&trans->ctx, te->set, &te->elem, - NFT_MSG_DELSETELEM, 0); + NFT_MSG_DELSETELEM); nft_setelem_remove(net, te->set, &te->elem); if (!nft_setelem_is_catchall(te->set, &te->elem)) { atomic_dec(&te->set->nelems); diff --git a/net/netfilter/nft_quota.c b/net/netfilter/nft_quota.c index 0363f533a42b..c4d1389f7185 100644 --- a/net/netfilter/nft_quota.c +++ b/net/netfilter/nft_quota.c @@ -60,7 +60,7 @@ static void nft_quota_obj_eval(struct nft_object *obj, if (overquota && !test_and_set_bit(NFT_QUOTA_DEPLETED_BIT, &priv->flags)) nft_obj_notify(nft_net(pkt), obj->key.table, obj, 0, 0, - NFT_MSG_NEWOBJ, nft_pf(pkt), 0, GFP_ATOMIC); + NFT_MSG_NEWOBJ, 0, nft_pf(pkt), 0, GFP_ATOMIC); } static int nft_quota_do_init(const struct nlattr * const tb[], -- cgit v1.2.3 From ffa2600044979aff4bd6238edb9af815a47d7c32 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 29 Sep 2021 10:36:04 -0500 Subject: hwmon: (occ) Fix P10 VRM temp sensors The P10 (temp sensor version 0x10) doesn't do the same VRM status reporting that was used on P9. It just reports the temperature, so drop the check for VRM fru type in the sysfs show function, and don't set the name to "alarm". Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type") Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20210929153604.14968-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/common.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 0d68a78be980..ae664613289c 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -340,18 +340,11 @@ static ssize_t occ_show_temp_10(struct device *dev, if (val == OCC_TEMP_SENSOR_FAULT) return -EREMOTEIO; - /* - * VRM doesn't return temperature, only alarm bit. This - * attribute maps to tempX_alarm instead of tempX_input for - * VRM - */ - if (temp->fru_type != OCC_FRU_TYPE_VRM) { - /* sensor not ready */ - if (val == 0) - return -EAGAIN; + /* sensor not ready */ + if (val == 0) + return -EAGAIN; - val *= 1000; - } + val *= 1000; break; case 2: val = temp->fru_type; @@ -886,7 +879,7 @@ static int occ_setup_sensor_attrs(struct occ *occ) 0, i); attr++; - if (sensors->temp.version > 1 && + if (sensors->temp.version == 2 && temp->fru_type == OCC_FRU_TYPE_VRM) { snprintf(attr->name, sizeof(attr->name), "temp%d_alarm", s); -- cgit v1.2.3 From f067d5585cda2de1e47dde914a8a4f151659e0ad Mon Sep 17 00:00:00 2001 From: Brandon Wyman Date: Tue, 28 Sep 2021 20:50:51 +0000 Subject: hwmon: (pmbus/ibm-cffps) max_power_out swap changes The bytes for max_power_out from the ibm-cffps devices differ in byte order for some power supplies. The Witherspoon power supply returns the bytes in MSB/LSB order. The Rainier power supply returns the bytes in LSB/MSB order. The Witherspoon power supply uses version cffps1. The Rainier power supply should use version cffps2. If version is cffps1, swap the bytes before output to max_power_out. Tested: Witherspoon before: 3148. Witherspoon after: 3148. Rainier before: 53255. Rainier after: 2000. Signed-off-by: Brandon Wyman Reviewed-by: Eddie James Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com [groeck: Replaced yoda programming] Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/ibm-cffps.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index df712ce4b164..53f7d1418bc9 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -171,8 +171,14 @@ static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf, cmd = CFFPS_SN_CMD; break; case CFFPS_DEBUGFS_MAX_POWER_OUT: - rc = i2c_smbus_read_word_swapped(psu->client, - CFFPS_MAX_POWER_OUT_CMD); + if (psu->version == cffps1) { + rc = i2c_smbus_read_word_swapped(psu->client, + CFFPS_MAX_POWER_OUT_CMD); + } else { + rc = i2c_smbus_read_word_data(psu->client, + CFFPS_MAX_POWER_OUT_CMD); + } + if (rc < 0) return rc; -- cgit v1.2.3 From 2292e2f685cd5c65e3f47bbcf9f469513acc3195 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 27 Sep 2021 10:07:40 +0300 Subject: hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller Add missed attribute for reading POUT from page 1. It is supported by device, but has been missed in initial commit. Fixes: 2c6fcbb21149 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210927070740.2149290-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/mp2975.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index eb94bd5f4e2a..51986adfbf47 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -54,7 +54,7 @@ #define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \ - PMBUS_PHASE_VIRTUAL) + PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL) struct mp2975_data { struct pmbus_driver_info info; -- cgit v1.2.3 From 943c15ac1b84d378da26bba41c83c67e16499ac4 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:51 +0300 Subject: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-1-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83791d.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 37b25a1474c4..3c1be2c11fdf 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -273,9 +273,6 @@ struct w83791d_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - /* array of 2 pointers to subclients */ - struct i2c_client *lm75[2]; - /* volts */ u8 in[NUMBER_OF_VIN]; /* Register value */ u8 in_max[NUMBER_OF_VIN]; /* Register value */ @@ -1257,7 +1254,6 @@ static const struct attribute_group w83791d_group_fanpwm45 = { static int w83791d_detect_subclients(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; - struct w83791d_data *data = i2c_get_clientdata(client); int address = client->addr; int i, id; u8 val; @@ -1280,22 +1276,19 @@ static int w83791d_detect_subclients(struct i2c_client *client) } val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); - if (!(val & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + (val & 0x7)); - if (!(val & 0x80)) { - if (!IS_ERR(data->lm75[0]) && - ((val & 0x7) == ((val >> 4) & 0x7))) { - dev_err(&client->dev, - "duplicate addresses 0x%x, " - "use force_subclient\n", - data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + ((val >> 4) & 0x7)); + + if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) { + dev_err(&client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7)); + return -ENODEV; } + if (!(val & 0x08)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (val & 0x7)); + + if (!(val & 0x80)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((val >> 4) & 0x7)); + return 0; } -- cgit v1.2.3 From 0f36b88173f028e372668ae040ab1a496834d278 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:52 +0300 Subject: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83792d.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index abd5c3a722b9..1f175f381350 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -264,9 +264,6 @@ struct w83792d_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - /* array of 2 pointers to subclients */ - struct i2c_client *lm75[2]; - u8 in[9]; /* Register value */ u8 in_max[9]; /* Register value */ u8 in_min[9]; /* Register value */ @@ -927,7 +924,6 @@ w83792d_detect_subclients(struct i2c_client *new_client) int address = new_client->addr; u8 val; struct i2c_adapter *adapter = new_client->adapter; - struct w83792d_data *data = i2c_get_clientdata(new_client); id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -946,21 +942,19 @@ w83792d_detect_subclients(struct i2c_client *new_client) } val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); - if (!(val & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&new_client->dev, adapter, - 0x48 + (val & 0x7)); - if (!(val & 0x80)) { - if (!IS_ERR(data->lm75[0]) && - ((val & 0x7) == ((val >> 4) & 0x7))) { - dev_err(&new_client->dev, - "duplicate addresses 0x%x, use force_subclient\n", - data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&new_client->dev, adapter, - 0x48 + ((val >> 4) & 0x7)); + + if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) { + dev_err(&new_client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7)); + return -ENODEV; } + if (!(val & 0x08)) + devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + (val & 0x7)); + + if (!(val & 0x80)) + devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + ((val >> 4) & 0x7)); + return 0; } -- cgit v1.2.3 From dd4d747ef05addab887dc8ff0d6ab9860bbcd783 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:53 +0300 Subject: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83793.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index e7d0484eabe4..1d2854de1cfc 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -202,7 +202,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max) } struct w83793_data { - struct i2c_client *lm75[2]; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -1566,7 +1565,6 @@ w83793_detect_subclients(struct i2c_client *client) int address = client->addr; u8 tmp; struct i2c_adapter *adapter = client->adapter; - struct w83793_data *data = i2c_get_clientdata(client); id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -1586,21 +1584,19 @@ w83793_detect_subclients(struct i2c_client *client) } tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR); - if (!(tmp & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + (tmp & 0x7)); - if (!(tmp & 0x80)) { - if (!IS_ERR(data->lm75[0]) - && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) { - dev_err(&client->dev, - "duplicate addresses 0x%x, " - "use force_subclients\n", data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + ((tmp >> 4) & 0x7)); + + if (!(tmp & 0x88) && (tmp & 0x7) == ((tmp >> 4) & 0x7)) { + dev_err(&client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (tmp & 0x7)); + return -ENODEV; } + if (!(tmp & 0x08)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (tmp & 0x7)); + + if (!(tmp & 0x80)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((tmp >> 4) & 0x7)); + return 0; } -- cgit v1.2.3 From eed183abc0d3b8adb64fd1363b7cea7986cd58d6 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 2 Oct 2021 11:04:09 +0200 Subject: powerpc/fsl/dts: Fix phy-connection-type for fm1mac3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Property phy-connection-type contains invalid value "sgmii-2500" per scheme defined in file ethernet-controller.yaml. Correct phy-connection-type value should be "2500base-x". Signed-off-by: Pali Rohár Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)") Acked-by: Scott Wood Signed-off-by: David S. Miller --- arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts index 5ba6fbfca274..f82f85c65964 100644 --- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts @@ -154,7 +154,7 @@ fm1mac3: ethernet@e4000 { phy-handle = <&sgmii_aqr_phy3>; - phy-connection-type = "sgmii-2500"; + phy-connection-type = "2500base-x"; sleep = <&rcpm 0x20000000>; }; -- cgit v1.2.3 From 06cc978d3ff226072780f74897800b33e78abb57 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 2 Oct 2021 18:23:02 +0900 Subject: block: genhd: fix double kfree() in __alloc_disk_node() syzbot is reporting use-after-free read at bdev_free_inode() [1], for kfree() from __alloc_disk_node() is called before bdev_free_inode() (which is called after RCU grace period) reads bdev->bd_disk and calls kfree(bdev->bd_disk). Fix use-after-free read followed by double kfree() problem by making sure that bdev->bd_disk is NULL when calling iput(). Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/e6dd13c5-8db0-4392-6e78-a42ee5d2a1c4@i-love.sakura.ne.jp Signed-off-by: Jens Axboe --- block/bdev.c | 2 +- block/genhd.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/block/bdev.c b/block/bdev.c index cf2780cb44a7..485a258b0ab3 100644 --- a/block/bdev.c +++ b/block/bdev.c @@ -490,7 +490,6 @@ struct block_device *bdev_alloc(struct gendisk *disk, u8 partno) bdev = I_BDEV(inode); mutex_init(&bdev->bd_fsfreeze_mutex); spin_lock_init(&bdev->bd_size_lock); - bdev->bd_disk = disk; bdev->bd_partno = partno; bdev->bd_inode = inode; bdev->bd_stats = alloc_percpu(struct disk_stats); @@ -498,6 +497,7 @@ struct block_device *bdev_alloc(struct gendisk *disk, u8 partno) iput(inode); return NULL; } + bdev->bd_disk = disk; return bdev; } diff --git a/block/genhd.c b/block/genhd.c index 7b6e5e1cf956..496e8458c357 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1268,6 +1268,7 @@ struct gendisk *__alloc_disk_node(struct request_queue *q, int node_id, out_destroy_part_tbl: xa_destroy(&disk->part_tbl); + disk->part0->bd_disk = NULL; iput(disk->part0->bd_inode); out_free_bdi: bdi_put(disk->bdi); -- cgit v1.2.3 From 7cd8b1542a7ba0720c5a0a85ed414a122015228b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Oct 2021 19:20:33 +0300 Subject: ptp_pch: Load module automatically if ID matches The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Fixes: 863d08ece9bf ("supports eg20t ptp clock") Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller --- drivers/ptp/ptp_pch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c index a17e8cc642c5..8070f3fd98f0 100644 --- a/drivers/ptp/ptp_pch.c +++ b/drivers/ptp/ptp_pch.c @@ -644,6 +644,7 @@ static const struct pci_device_id pch_ieee1588_pcidev_id[] = { }, {0} }; +MODULE_DEVICE_TABLE(pci, pch_ieee1588_pcidev_id); static SIMPLE_DEV_PM_OPS(pch_pm_ops, pch_suspend, pch_resume); -- cgit v1.2.3 From 57b44817a8d63e75394bc21849f585ded53de8bb Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Tue, 28 Sep 2021 07:57:53 -0700 Subject: MAINTAINERS: Drop outdated FPGA Manager website The rocketboards website no longer really reflects a good landing place for people interested in FPGA Manager. Cc: Xu Yilun Cc: Wu Hao Acked-by: Xu Yilun Signed-off-by: Moritz Fischer --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2ec4c2a2458a..c4eaac287edb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7342,7 +7342,6 @@ M: Xu Yilun R: Tom Rix L: linux-fpga@vger.kernel.org S: Maintained -W: http://www.rocketboards.org Q: http://patchwork.kernel.org/project/linux-fpga/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git F: Documentation/devicetree/bindings/fpga/ -- cgit v1.2.3 From cdc1e6e225e3256d56dc6648411630e71d7c776b Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 2 Oct 2021 03:17:29 -0700 Subject: drm/i915: fix blank screen booting crashes 5.15-rc1 crashes with blank screen when booting up on two ThinkPads using i915. Bisections converge convincingly, but arrive at different and suprising "culprits", none of them the actual culprit. netconsole (with init_netconsole() hacked to call i915_init() when logging has started, instead of by module_init()) tells the story: kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245! with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify(). I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that function needs to be 4-byte aligned. Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation") Signed-off-by: Hugh Dickins Tested-by: Steven Rostedt (VMware) Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/gt/intel_context.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_context.c b/drivers/gpu/drm/i915/gt/intel_context.c index 745e84c72c90..e866105dd174 100644 --- a/drivers/gpu/drm/i915/gt/intel_context.c +++ b/drivers/gpu/drm/i915/gt/intel_context.c @@ -362,8 +362,9 @@ static int __intel_context_active(struct i915_active *active) return 0; } -static int sw_fence_dummy_notify(struct i915_sw_fence *sf, - enum i915_sw_fence_notify state) +static int __i915_sw_fence_call +sw_fence_dummy_notify(struct i915_sw_fence *sf, + enum i915_sw_fence_notify state) { return NOTIFY_DONE; } -- cgit v1.2.3 From 6e9bfdcf0a3b1c8126878c21adcfc343f89d4a6a Mon Sep 17 00:00:00 2001 From: Dave Wysochanski Date: Fri, 1 Oct 2021 15:37:31 +0100 Subject: cachefiles: Fix oops in trace_cachefiles_mark_buried due to NULL object In cachefiles_mark_object_buried, the dentry in question may not have an owner, and thus our cachefiles_object pointer may be NULL when calling the tracepoint, in which case we will also not have a valid debug_id to print in the tracepoint. Check for NULL object in the tracepoint and if so, just set debug_id to MAX_UINT as was done in 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces"). This fixes the following oops: FS-Cache: Cache "mycache" added (type cachefiles) CacheFiles: File cache on vdc registered ... Workqueue: fscache_object fscache_object_work_func [fscache] RIP: 0010:trace_event_raw_event_cachefiles_mark_buried+0x4e/0xa0 [cachefiles] .... Call Trace: cachefiles_mark_object_buried+0xa5/0xb0 [cachefiles] cachefiles_bury_object+0x270/0x430 [cachefiles] cachefiles_walk_to_object+0x195/0x9c0 [cachefiles] cachefiles_lookup_object+0x5a/0xc0 [cachefiles] fscache_look_up_object+0xd7/0x160 [fscache] fscache_object_work_func+0xb2/0x340 [fscache] process_one_work+0x1f1/0x390 worker_thread+0x53/0x3e0 kthread+0x127/0x150 Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski Signed-off-by: David Howells cc: linux-cachefs@redhat.com Signed-off-by: Linus Torvalds --- include/trace/events/cachefiles.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/cachefiles.h b/include/trace/events/cachefiles.h index 9a448fe9355d..695bfdbfdcad 100644 --- a/include/trace/events/cachefiles.h +++ b/include/trace/events/cachefiles.h @@ -305,7 +305,7 @@ TRACE_EVENT(cachefiles_mark_buried, ), TP_fast_assign( - __entry->obj = obj->fscache.debug_id; + __entry->obj = obj ? obj->fscache.debug_id : UINT_MAX; __entry->de = de; __entry->why = why; ), -- cgit v1.2.3 From bb4a23c994aebcd96c567a0be8e964d516bd4a61 Mon Sep 17 00:00:00 2001 From: Tong Tiangen Date: Wed, 1 Sep 2021 02:46:19 +0000 Subject: riscv/vdso: Refactor asm/vdso.h The asm/vdso.h will be included in vdso.lds.S in the next patch, the following cleanup is needed to avoid syntax error: 1.the declaration of sys_riscv_flush_icache() is moved into asm/syscall.h. 2.the definition of struct vdso_data is moved into kernel/vdso.c. 2.the definition of VDSO_SYMBOL is placed under "#ifndef __ASSEMBLY__". Also remove the redundant linux/types.h include. Signed-off-by: Tong Tiangen Reviewed-by: Kefeng Wang Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/syscall.h | 1 + arch/riscv/include/asm/vdso.h | 16 ++++++++++------ arch/riscv/kernel/syscall_table.c | 1 - arch/riscv/kernel/vdso.c | 5 ++++- 4 files changed, 15 insertions(+), 8 deletions(-) diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h index b933b1583c9f..34fbb3ea21d5 100644 --- a/arch/riscv/include/asm/syscall.h +++ b/arch/riscv/include/asm/syscall.h @@ -82,4 +82,5 @@ static inline int syscall_get_arch(struct task_struct *task) #endif } +asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t); #endif /* _ASM_RISCV_SYSCALL_H */ diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h index 893e47195e30..a4a979c89ea0 100644 --- a/arch/riscv/include/asm/vdso.h +++ b/arch/riscv/include/asm/vdso.h @@ -16,18 +16,22 @@ #ifdef CONFIG_MMU #include -#include +/* + * All systems with an MMU have a VDSO, but systems without an MMU don't + * support shared libraries and therefor don't have one. + */ +#ifdef CONFIG_MMU -#ifndef CONFIG_GENERIC_TIME_VSYSCALL -struct vdso_data { -}; -#endif +#ifndef __ASSEMBLY__ +#include #define VDSO_SYMBOL(base, name) \ (void __user *)((unsigned long)(base) + __vdso_##name##_offset) #endif /* CONFIG_MMU */ -asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t); +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_MMU */ #endif /* _ASM_RISCV_VDSO_H */ diff --git a/arch/riscv/kernel/syscall_table.c b/arch/riscv/kernel/syscall_table.c index a63c667c27b3..44b1420a2270 100644 --- a/arch/riscv/kernel/syscall_table.c +++ b/arch/riscv/kernel/syscall_table.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #undef __SYSCALL diff --git a/arch/riscv/kernel/vdso.c b/arch/riscv/kernel/vdso.c index 25a3b8849599..72e93d218335 100644 --- a/arch/riscv/kernel/vdso.c +++ b/arch/riscv/kernel/vdso.c @@ -12,10 +12,13 @@ #include #include #include +#include + #ifdef CONFIG_GENERIC_TIME_VSYSCALL #include #else -#include +struct vdso_data { +}; #endif extern char vdso_start[], vdso_end[]; -- cgit v1.2.3 From 78a743cd82a35ca0724179fc22834f06a2151fc2 Mon Sep 17 00:00:00 2001 From: Tong Tiangen Date: Wed, 1 Sep 2021 02:46:20 +0000 Subject: riscv/vdso: Move vdso data page up front As commit 601255ae3c98 ("arm64: vdso: move data page before code pages"), the same issue exists on riscv, testcase is shown below, make sure that vdso.so is bigger than page size, struct timespec tp; clock_gettime(5, &tp); printf("tv_sec: %ld, tv_nsec: %ld\n", tp.tv_sec, tp.tv_nsec); without this patch, test result : tv_sec: 0, tv_nsec: 0 with this patch, test result : tv_sec: 1629271537, tv_nsec: 748000000 Move the vdso data page in front of the VDSO area to fix the issue. Fixes: ad5d1122b82fb ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Signed-off-by: Tong Tiangen Reviewed-by: Kefeng Wang Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/vdso.h | 2 ++ arch/riscv/kernel/vdso.c | 44 +++++++++++++++++++++++---------------- arch/riscv/kernel/vdso/vdso.lds.S | 3 ++- 3 files changed, 30 insertions(+), 19 deletions(-) diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h index a4a979c89ea0..208e31bc5d1c 100644 --- a/arch/riscv/include/asm/vdso.h +++ b/arch/riscv/include/asm/vdso.h @@ -22,6 +22,8 @@ */ #ifdef CONFIG_MMU +#define __VVAR_PAGES 1 + #ifndef __ASSEMBLY__ #include diff --git a/arch/riscv/kernel/vdso.c b/arch/riscv/kernel/vdso.c index 72e93d218335..e7bd92d8749b 100644 --- a/arch/riscv/kernel/vdso.c +++ b/arch/riscv/kernel/vdso.c @@ -23,6 +23,13 @@ struct vdso_data { extern char vdso_start[], vdso_end[]; +enum vvar_pages { + VVAR_DATA_PAGE_OFFSET, + VVAR_NR_PAGES, +}; + +#define VVAR_SIZE (VVAR_NR_PAGES << PAGE_SHIFT) + static unsigned int vdso_pages __ro_after_init; static struct page **vdso_pagelist __ro_after_init; @@ -41,7 +48,7 @@ static int __init vdso_init(void) vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT; vdso_pagelist = - kcalloc(vdso_pages + 1, sizeof(struct page *), GFP_KERNEL); + kcalloc(vdso_pages + VVAR_NR_PAGES, sizeof(struct page *), GFP_KERNEL); if (unlikely(vdso_pagelist == NULL)) { pr_err("vdso: pagelist allocation failed\n"); return -ENOMEM; @@ -66,7 +73,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, unsigned long vdso_base, vdso_len; int ret; - vdso_len = (vdso_pages + 1) << PAGE_SHIFT; + BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES); + + vdso_len = (vdso_pages + VVAR_NR_PAGES) << PAGE_SHIFT; mmap_write_lock(mm); vdso_base = get_unmapped_area(NULL, 0, vdso_len, 0, 0); @@ -75,29 +84,28 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, goto end; } - /* - * Put vDSO base into mm struct. We need to do this before calling - * install_special_mapping or the perf counter mmap tracking code - * will fail to recognise it as a vDSO (since arch_vma_name fails). - */ - mm->context.vdso = (void *)vdso_base; + mm->context.vdso = NULL; + ret = install_special_mapping(mm, vdso_base, VVAR_SIZE, + (VM_READ | VM_MAYREAD), &vdso_pagelist[vdso_pages]); + if (unlikely(ret)) + goto end; ret = - install_special_mapping(mm, vdso_base, vdso_pages << PAGE_SHIFT, + install_special_mapping(mm, vdso_base + VVAR_SIZE, + vdso_pages << PAGE_SHIFT, (VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC), vdso_pagelist); - if (unlikely(ret)) { - mm->context.vdso = NULL; + if (unlikely(ret)) goto end; - } - vdso_base += (vdso_pages << PAGE_SHIFT); - ret = install_special_mapping(mm, vdso_base, PAGE_SIZE, - (VM_READ | VM_MAYREAD), &vdso_pagelist[vdso_pages]); + /* + * Put vDSO base into mm struct. We need to do this before calling + * install_special_mapping or the perf counter mmap tracking code + * will fail to recognise it as a vDSO (since arch_vma_name fails). + */ + mm->context.vdso = (void *)vdso_base + VVAR_SIZE; - if (unlikely(ret)) - mm->context.vdso = NULL; end: mmap_write_unlock(mm); return ret; @@ -108,7 +116,7 @@ const char *arch_vma_name(struct vm_area_struct *vma) if (vma->vm_mm && (vma->vm_start == (long)vma->vm_mm->context.vdso)) return "[vdso]"; if (vma->vm_mm && (vma->vm_start == - (long)vma->vm_mm->context.vdso + PAGE_SIZE)) + (long)vma->vm_mm->context.vdso - VVAR_SIZE)) return "[vdso_data]"; return NULL; } diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S index e6f558bca71b..e9111f700af0 100644 --- a/arch/riscv/kernel/vdso/vdso.lds.S +++ b/arch/riscv/kernel/vdso/vdso.lds.S @@ -3,12 +3,13 @@ * Copyright (C) 2012 Regents of the University of California */ #include +#include OUTPUT_ARCH(riscv) SECTIONS { - PROVIDE(_vdso_data = . + PAGE_SIZE); + PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE); . = SIZEOF_HEADERS; .hash : { *(.hash) } :text -- cgit v1.2.3 From 8bb0ab3ae7a4dbe6cf32deb830cf2bdbf5736867 Mon Sep 17 00:00:00 2001 From: Tong Tiangen Date: Wed, 1 Sep 2021 02:46:21 +0000 Subject: riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable riscv architectures relying on mmap_sem for write in their arch_setup_additional_pages. If the waiting task gets killed by the oom killer it would block oom_reaper from asynchronous address space reclaim and reduce the chances of timely OOM resolving. Wait for the lock in the killable mode and return with EINTR if the task got killed while waiting. Signed-off-by: Tong Tiangen Reviewed-by: Kefeng Wang Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/vdso.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/riscv/kernel/vdso.c b/arch/riscv/kernel/vdso.c index e7bd92d8749b..b70956d80408 100644 --- a/arch/riscv/kernel/vdso.c +++ b/arch/riscv/kernel/vdso.c @@ -77,7 +77,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, vdso_len = (vdso_pages + VVAR_NR_PAGES) << PAGE_SHIFT; - mmap_write_lock(mm); + if (mmap_write_lock_killable(mm)) + return -EINTR; + vdso_base = get_unmapped_area(NULL, 0, vdso_len, 0, 0); if (IS_ERR_VALUE(vdso_base)) { ret = vdso_base; -- cgit v1.2.3 From 26d90b5590579def54382a2fc34cfbe8518a9851 Mon Sep 17 00:00:00 2001 From: Jiri Valek - 2N Date: Mon, 20 Sep 2021 14:53:48 +0200 Subject: iio: light: opt3001: Fixed timeout error when 0 lux Reading from sensor returned timeout error under zero light conditions. Signed-off-by: Jiri Valek - 2N Fixes: ac663db3678a ("iio: light: opt3001: enable operation w/o IRQ") Link: https://lore.kernel.org/r/20210920125351.6569-1-valek@2n.cz Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/opt3001.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 52963da401a7..1880bd5bb258 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -276,6 +276,8 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready, msecs_to_jiffies(OPT3001_RESULT_READY_LONG)); + if (ret == 0) + return -ETIMEDOUT; } else { /* Sleep for result ready time */ timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ? @@ -312,9 +314,7 @@ err: /* Disallow IRQ to access the device while lock is active */ opt->ok_to_ignore_lock = false; - if (ret == 0) - return -ETIMEDOUT; - else if (ret < 0) + if (ret < 0) return ret; if (opt->use_irq) { -- cgit v1.2.3 From 291073a566b2094c7192872cc0f17ce73d83cb76 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 13:34:19 -0700 Subject: kvm: fix objtool relocation warning The recent change to make objtool aware of more symbol relocation types (commit 24ff65257375: "objtool: Teach get_alt_entry() about more relocation types") also added another check, and resulted in this objtool warning when building kvm on x86: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception The reason seems to be that kvm_fastop_exception() is marked as a global symbol, which causes the relocation to ke kept around for objtool. And at the same time, the kvm_fastop_exception definition (which is done as an inline asm statement) doesn't actually set the type of the global, which then makes objtool unhappy. The minimal fix is to just not mark kvm_fastop_exception as being a global symbol. It's only used in that one compilation unit anyway, so it was always pointless. That's how all the other local exception table labels are done. I'm not entirely happy about the kinds of games that the kvm code plays with doing its own exception handling, and the fact that it confused objtool is most definitely a symptom of the code being a bit too subtle and ad-hoc. But at least this trivial one-liner makes objtool no longer upset about what is going on. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Cc: Borislav Petkov Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Vitaly Kuznetsov Cc: Wanpeng Li Cc: Jim Mattson Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Josh Poimboeuf Cc: Nathan Chancellor Signed-off-by: Linus Torvalds --- arch/x86/kvm/emulate.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index c589ac832265..9a144ca8e146 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -435,7 +435,6 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop); __FOP_RET(#op) asm(".pushsection .fixup, \"ax\"\n" - ".global kvm_fastop_exception \n" "kvm_fastop_exception: xor %esi, %esi; ret\n" ".popsection"); -- cgit v1.2.3 From 7fab1c12bde926c5a8c7d5984c551d0854d7e0b3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 13:45:48 -0700 Subject: objtool: print out the symbol type when complaining about it The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Signed-off-by: Linus Torvalds --- tools/objtool/special.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/tools/objtool/special.c b/tools/objtool/special.c index f58ecc50fb10..f1428e32a505 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -110,8 +110,10 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, return -1; } if (!reloc2sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off)) { - WARN_FUNC("don't know how to handle reloc symbol type: %s", - sec, offset + entry->orig, orig_reloc->sym->name); + WARN_FUNC("don't know how to handle reloc symbol type %d: %s", + sec, offset + entry->orig, + orig_reloc->sym->type, + orig_reloc->sym->name); return -1; } @@ -132,8 +134,10 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, return 1; if (!reloc2sec_off(new_reloc, &alt->new_sec, &alt->new_off)) { - WARN_FUNC("don't know how to handle reloc symbol type: %s", - sec, offset + entry->new, new_reloc->sym->name); + WARN_FUNC("don't know how to handle reloc symbol type %d: %s", + sec, offset + entry->new, + new_reloc->sym->type, + new_reloc->sym->name); return -1; } -- cgit v1.2.3 From 9b2f72cc0aa4bb444541bb87581c35b7508b37d3 Mon Sep 17 00:00:00 2001 From: Chen Jingwen Date: Tue, 28 Sep 2021 20:56:57 +0800 Subject: elf: don't use MAP_FIXED_NOREPLACE for elf interpreter mappings In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings") we still leave MAP_FIXED_NOREPLACE in place for load_elf_interp. Unfortunately, this will cause kernel to fail to start with: 1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already Failed to execute /init (error -17) The reason is that the elf interpreter (ld.so) has overlapping segments. readelf -l ld-2.31.so Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000002c94c 0x000000000002c94c R E 0x10000 LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0 0x00000000000021e8 0x0000000000002320 RW 0x10000 LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00 0x00000000000011ac 0x0000000000001328 RW 0x10000 The reason for this problem is the same as described in commit ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments"). Not only executable binaries, elf interpreters (e.g. ld.so) can have overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go back to MAP_FIXED in load_elf_interp. Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: # v4.19 Cc: Andrew Morton Cc: Michal Hocko Signed-off-by: Chen Jingwen Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 69d900a8473d..a813b70f594e 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -630,7 +630,7 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex, vaddr = eppnt->p_vaddr; if (interp_elf_ex->e_type == ET_EXEC || load_addr_set) - elf_type |= MAP_FIXED_NOREPLACE; + elf_type |= MAP_FIXED; else if (no_base && interp_elf_ex->e_type == ET_DYN) load_addr = -vaddr; -- cgit v1.2.3 From 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 14:08:47 -0700 Subject: Linux 5.15-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 437ccc66a1c2..7b74223d1309 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit v1.2.3 From b2a4f4a302b83976ad0d2930abe0f38e6119a144 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Fri, 20 Aug 2021 17:29:49 +0800 Subject: ARM: dts: imx: change the spi-nor tx Before commit 0e30f47232ab5 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. Though the spi-nor device on imx6sx-sdb/imx6ul(l/z)-14x14-evk board do not support PP-1-4-4/PP-1-1-4, but if tx is 4 in dts file, it will also impact the read mode selection. For the spi-nor device on the upper mentioned boards, they support read 1-4-4 mode and read 1-1-4 mode according to the device internal sfdp register. But qspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode, PP-1-1-1 mode. Signed-off-by: Haibo Chen Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++-- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5a63ca615722..99f4cf777a38 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -114,7 +114,7 @@ compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; @@ -124,7 +124,7 @@ compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <2>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 779cc536566d..a3fde3316c73 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -292,7 +292,7 @@ compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; }; -- cgit v1.2.3 From 04aa946d57b20c40e541fb4ba2bcb390a22f404c Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Fri, 20 Aug 2021 17:29:50 +0800 Subject: arm64: dts: imx8: change the spi-nor tx Before commit 0e30f47232ab5 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. qspi and fspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode. Signed-off-by: Haibo Chen Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 ++ arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 2 +- 6 files changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index 988f8ab679ad..40f5e7a3b064 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -91,7 +91,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index 4e2820d19244..a2b24d4d4e3e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -48,7 +48,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index 54eaf3d6055b..3b2d627a0342 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -101,7 +101,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index aa78e0d8c72b..fc178eebf8aa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -74,7 +74,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 49f9db971f3b..b83df77195ec 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -337,6 +337,8 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index f593e4ff62e1..564746d5000d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -281,7 +281,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; m25p,fast-read; spi-max-frequency = <50000000>; -- cgit v1.2.3 From 1f8d398e1cd8813f8ec16d55c086e8270a9c18ab Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Fri, 1 Oct 2021 15:31:10 +0200 Subject: ALSA: hda/realtek: Complete partial device name to avoid ambiguity The string "Clevo X170" is not enough to unambiguously identify the correct device. Fixing it so another Clevo barebone name starting with "X170" can be added without causing confusion. Signed-off-by: Werner Sembach Cc: Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6bf6151347d8..45e1f570f1e6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2537,7 +2537,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), - SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950), -- cgit v1.2.3 From cc03069a397005da24f6783835c274d5aedf6043 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Fri, 1 Oct 2021 15:31:11 +0200 Subject: ALSA: hda/realtek: Add quirk for Clevo X170KM-G This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This fixes the issue of the devices internal Speaker not working. Signed-off-by: Werner Sembach Cc: Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 45e1f570f1e6..0331fae5525e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2538,6 +2538,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED), SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950), -- cgit v1.2.3 From 686cb8b9f6b46787f035afe8fbd132a74e6b1bdd Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Mon, 27 Sep 2021 15:06:14 +0800 Subject: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path. Fixes: 1c8f9b91c456 ("bpf: s390: add JIT support for multi-function programs") Signed-off-by: Tiezhu Yang Acked-by: Ilya Leoshkevich Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 840d8594437d..1a374d021e25 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -1826,7 +1826,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) jit.addrs = kvcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL); if (jit.addrs == NULL) { fp = orig_fp; - goto out; + goto free_addrs; } /* * Three initial passes: -- cgit v1.2.3 From a46044a92add6a400f4dada7b943b30221f7cc80 Mon Sep 17 00:00:00 2001 From: Niklas Schnelle Date: Wed, 22 Sep 2021 15:55:12 +0200 Subject: s390/pci: fix zpci_zdev_put() on reserve Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") the reference count of a zpci_dev is incremented between pcibios_add_device() and pcibios_release_device() which was supposed to prevent the zpci_dev from being freed while the common PCI code has access to it. It was missed however that the handling of zPCI availability events assumed that once zpci_zdev_put() was called no later availability event would still see the device. With the previously mentioned commit however this assumption no longer holds and we must make sure that we only drop the initial long-lived reference the zPCI subsystem holds exactly once. Do so by introducing a zpci_device_reserved() function that handles when a device is reserved. Here we make sure the zpci_dev will not be considered for further events by removing it from the zpci_list. This also means that the device actually stays in the ZPCI_FN_STATE_RESERVED state between the time we know it has been reserved and the final reference going away. We thus need to consider it a real state instead of just a conceptual state after the removal. The final cleanup of PCI resources, removal from zbus, and destruction of the IOMMU stays in zpci_release_device() to make sure holders of the reference do see valid data until the release. Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle Signed-off-by: Vasily Gorbik --- arch/s390/include/asm/pci.h | 2 ++ arch/s390/pci/pci.c | 45 +++++++++++++++++++++++++++++++++----- arch/s390/pci/pci_event.c | 4 ++-- drivers/pci/hotplug/s390_pci_hpc.c | 9 +------- 4 files changed, 45 insertions(+), 15 deletions(-) diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index e4803ec51110..6b3c366af78e 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -207,6 +207,8 @@ int zpci_enable_device(struct zpci_dev *); int zpci_disable_device(struct zpci_dev *); int zpci_scan_configured_device(struct zpci_dev *zdev, u32 fh); int zpci_deconfigure_device(struct zpci_dev *zdev); +void zpci_device_reserved(struct zpci_dev *zdev); +bool zpci_is_device_configured(struct zpci_dev *zdev); int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64); int zpci_unregister_ioat(struct zpci_dev *, u8); diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index e7e6788d75a8..b833155ce838 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -92,7 +92,7 @@ void zpci_remove_reserved_devices(void) spin_unlock(&zpci_list_lock); list_for_each_entry_safe(zdev, tmp, &remove, entry) - zpci_zdev_put(zdev); + zpci_device_reserved(zdev); } int pci_domain_nr(struct pci_bus *bus) @@ -751,6 +751,14 @@ error: return ERR_PTR(rc); } +bool zpci_is_device_configured(struct zpci_dev *zdev) +{ + enum zpci_state state = zdev->state; + + return state != ZPCI_FN_STATE_RESERVED && + state != ZPCI_FN_STATE_STANDBY; +} + /** * zpci_scan_configured_device() - Scan a freshly configured zpci_dev * @zdev: The zpci_dev to be configured @@ -822,6 +830,31 @@ int zpci_deconfigure_device(struct zpci_dev *zdev) return 0; } +/** + * zpci_device_reserved() - Mark device as resverved + * @zdev: the zpci_dev that was reserved + * + * Handle the case that a given zPCI function was reserved by another system. + * After a call to this function the zpci_dev can not be found via + * get_zdev_by_fid() anymore but may still be accessible via existing + * references though it will not be functional anymore. + */ +void zpci_device_reserved(struct zpci_dev *zdev) +{ + if (zdev->has_hp_slot) + zpci_exit_slot(zdev); + /* + * Remove device from zpci_list as it is going away. This also + * makes sure we ignore subsequent zPCI events for this device. + */ + spin_lock(&zpci_list_lock); + list_del(&zdev->entry); + spin_unlock(&zpci_list_lock); + zdev->state = ZPCI_FN_STATE_RESERVED; + zpci_dbg(3, "rsv fid:%x\n", zdev->fid); + zpci_zdev_put(zdev); +} + void zpci_release_device(struct kref *kref) { struct zpci_dev *zdev = container_of(kref, struct zpci_dev, kref); @@ -843,6 +876,12 @@ void zpci_release_device(struct kref *kref) case ZPCI_FN_STATE_STANDBY: if (zdev->has_hp_slot) zpci_exit_slot(zdev); + spin_lock(&zpci_list_lock); + list_del(&zdev->entry); + spin_unlock(&zpci_list_lock); + zpci_dbg(3, "rsv fid:%x\n", zdev->fid); + fallthrough; + case ZPCI_FN_STATE_RESERVED: if (zdev->has_resources) zpci_cleanup_bus_resources(zdev); zpci_bus_device_unregister(zdev); @@ -851,10 +890,6 @@ void zpci_release_device(struct kref *kref) default: break; } - - spin_lock(&zpci_list_lock); - list_del(&zdev->entry); - spin_unlock(&zpci_list_lock); zpci_dbg(3, "rem fid:%x\n", zdev->fid); kfree(zdev); } diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index c856f80cb21b..5b8d647523f9 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -140,7 +140,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) /* The 0x0304 event may immediately reserve the device */ if (!clp_get_state(zdev->fid, &state) && state == ZPCI_FN_STATE_RESERVED) { - zpci_zdev_put(zdev); + zpci_device_reserved(zdev); } } break; @@ -151,7 +151,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) case 0x0308: /* Standby -> Reserved */ if (!zdev) break; - zpci_zdev_put(zdev); + zpci_device_reserved(zdev); break; default: break; diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c index 014868752cd4..dcefdb42ac46 100644 --- a/drivers/pci/hotplug/s390_pci_hpc.c +++ b/drivers/pci/hotplug/s390_pci_hpc.c @@ -62,14 +62,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, hotplug_slot); - switch (zdev->state) { - case ZPCI_FN_STATE_STANDBY: - *value = 0; - break; - default: - *value = 1; - break; - } + *value = zpci_is_device_configured(zdev) ? 1 : 0; return 0; } -- cgit v1.2.3 From 410d591a19543f1347bc2b4b4ec3399cb548ba47 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Mon, 4 Oct 2021 09:03:53 +0800 Subject: kernfs: don't create a negative dentry if inactive node exists It's been reported that doing stress test for module insertion and removal can result in an ENOENT from libkmod for a valid module. In kernfs_iop_lookup() a negative dentry is created if there's no kernfs node associated with the dentry or the node is inactive. But inactive kernfs nodes are meant to be invisible to the VFS and creating a negative dentry for these can have unexpected side effects when the node transitions to an active state. The point of creating negative dentries is to avoid the expensive alloc/free cycle that occurs if there are frequent lookups for kernfs attributes that don't exist. So kernfs nodes that are not yet active should not result in a negative dentry being created so when they transition to an active state VFS lookups can create an associated dentry is a natural way. It's also been reported that https://github.com/osandov/blktests.git test block/001 hangs during the test. It was suggested that recent changes to blktests might have caused it but applying this patch resolved the problem without change to blktests. Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching") Tested-by: Yi Zhang ACKed-by: Al Viro Signed-off-by: Ian Kent Link: https://lore.kernel.org/r/163330943316.19450.15056895533949392922.stgit@mickey.themaw.net Signed-off-by: Greg Kroah-Hartman --- fs/kernfs/dir.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index cfc3ce8b815a..8e0a1378a4b1 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1111,7 +1111,14 @@ static struct dentry *kernfs_iop_lookup(struct inode *dir, kn = kernfs_find_ns(parent, dentry->d_name.name, ns); /* attach dentry and inode */ - if (kn && kernfs_active(kn)) { + if (kn) { + /* Inactive nodes are invisible to the VFS so don't + * create a negative. + */ + if (!kernfs_active(kn)) { + up_read(&kernfs_rwsem); + return NULL; + } inode = kernfs_get_inode(dir->i_sb, kn); if (!inode) inode = ERR_PTR(-ENOMEM); -- cgit v1.2.3 From ef162ac50d5512e51da53b4c971597aabac7ea1f Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Thu, 30 Sep 2021 18:42:17 +0300 Subject: ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The 1.35V for DDR3L rail at run-time is selected by the proper configuration on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of configuration registers to provide proper voltages on its rail. Run-time configuration registers could be configured differently than suspend configuration register for MCP16502 (VSEL2 affects only run-time configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK switches to self-refresh. Even on self-refresh it needs to be powered by a 1.35V rail. Thus, make sure the PMIC is configured properly when system is suspended. Fixes: 7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 8b13b031a167..f0772fa01751 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -196,11 +196,13 @@ regulator-state-standby { regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; regulator-mode = <4>; }; regulator-state-mem { regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; regulator-mode = <4>; }; }; -- cgit v1.2.3 From e42cbbe5c9a2a8423db4b1c32ec2a443d4de6323 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Thu, 30 Sep 2021 18:42:18 +0300 Subject: ARM: at91: pm: group constants and addresses loading Group constants and addresses loading. This commit prepares the field for the next one. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210930154219.2214051-3-claudiu.beznea@microchip.com --- arch/arm/mach-at91/pm_suspend.S | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index cbd61a3bcab1..34f251fdb743 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -1014,6 +1014,15 @@ ENTRY(at91_pm_suspend_in_sram) mov tmp1, #0 mcr p15, 0, tmp1, c7, c10, 4 + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] + str tmp1, .mckr_offset + ldr tmp1, [r0, #PM_DATA_PMC_VERSION] + str tmp1, .pmc_version + ldr tmp1, [r0, #PM_DATA_MEMCTRL] + str tmp1, .memtype + ldr tmp1, [r0, #PM_DATA_MODE] + str tmp1, .pm_mode + ldr tmp1, [r0, #PM_DATA_PMC] str tmp1, .pmc_base ldr tmp1, [r0, #PM_DATA_RAMC0] @@ -1022,14 +1031,6 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .sramc1_base ldr tmp1, [r0, #PM_DATA_RAMC_PHY] str tmp1, .sramc_phy_base - ldr tmp1, [r0, #PM_DATA_MEMCTRL] - str tmp1, .memtype - ldr tmp1, [r0, #PM_DATA_MODE] - str tmp1, .pm_mode - ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] - str tmp1, .mckr_offset - ldr tmp1, [r0, #PM_DATA_PMC_VERSION] - str tmp1, .pmc_version /* Both ldrne below are here to preload their address in the TLB */ ldr tmp1, [r0, #PM_DATA_SHDWC] str tmp1, .shdwc -- cgit v1.2.3 From d8d667ee0236dec6d717f27eec690d1324e7f322 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Thu, 30 Sep 2021 18:42:19 +0300 Subject: ARM: at91: pm: preload base address of controllers in tlb In suspend/resume procedure for AT91 architecture different controllers (PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings for power saving. Commit f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") introduced the access to RAMC PHY controller for SAMA7G5. The access to this controller is done after RAMC ports are closed, thus any TLB walk necessary for RAMC PHY virtual address will fail. In the development branch this was not encountered. However, on current kernel the issue is reproducible. To solve the issue the previous mechanism of pre-loading the TLB with the RAMC PHY virtual address has been used. However, only the addition of this new pre-load breaks the functionality for ARMv5 based devices (SAM9X60). This behavior has been encountered previously while debugging this code and using the same mechanism for pre-loading address for different controllers (e.g. pin controller, the assumption being that other requested translations are replaced from TLB). To solve this new issue the TLB flush + the extension of pre-loading the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The rest of the controllers should have been pre-loaded previously, anyway. Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") Depends-on: e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com --- arch/arm/mach-at91/pm_suspend.S | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 34f251fdb743..fdb4f63ecde4 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -1014,6 +1014,10 @@ ENTRY(at91_pm_suspend_in_sram) mov tmp1, #0 mcr p15, 0, tmp1, c7, c10, 4 + /* Flush tlb. */ + mov r4, #0 + mcr p15, 0, r4, c8, c7, 0 + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] str tmp1, .mckr_offset ldr tmp1, [r0, #PM_DATA_PMC_VERSION] @@ -1023,23 +1027,42 @@ ENTRY(at91_pm_suspend_in_sram) ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode + /* + * ldrne below are here to preload their address in the TLB as access + * to RAM may be limited while in self-refresh. + */ ldr tmp1, [r0, #PM_DATA_PMC] str tmp1, .pmc_base + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_RAMC0] str tmp1, .sramc_base + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_RAMC1] str tmp1, .sramc1_base + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + +#ifndef CONFIG_SOC_SAM_V4_V5 + /* ldrne below are here to preload their address in the TLB */ ldr tmp1, [r0, #PM_DATA_RAMC_PHY] str tmp1, .sramc_phy_base - /* Both ldrne below are here to preload their address in the TLB */ + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_SHDWC] str tmp1, .shdwc cmp tmp1, #0 ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_SFRBU] str tmp1, .sfrbu cmp tmp1, #0 ldrne tmp2, [tmp1, #0x10] +#endif /* Active the self-refresh mode */ at91_sramc_self_refresh_ena -- cgit v1.2.3 From 968f6e9d51e2da6eade2afb65629ab87a8a0faf3 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 15 Sep 2021 10:48:35 +0300 Subject: ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain GMAC's MDIO pins should be configured with slew-rate enabled, while the data + signaling pins should be configured with slew-rate disabled when GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets the slew-rate as enabled for all pins. Adapt the device tree to comply with these. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index f0772fa01751..30b67cad5f14 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -355,7 +355,10 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; + pinctrl-0 = <&pinctrl_gmac0_default + &pinctrl_gmac0_mdio_default + &pinctrl_gmac0_txck_default + &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; status = "okay"; @@ -370,7 +373,9 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>; + pinctrl-0 = <&pinctrl_gmac1_default + &pinctrl_gmac1_mdio_default + &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; status = "okay"; @@ -425,14 +430,20 @@ , , , - , - , ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac0_mdio_default: gmac0_mdio_default { + pinmux = , + ; bias-disable; }; pinctrl_gmac0_txck_default: gmac0_txck_default { pinmux = ; + slew-rate = <0>; bias-pull-up; }; @@ -449,8 +460,13 @@ , , , - , - , + ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac1_mdio_default: gmac1_mdio_default { + pinmux = , ; bias-disable; }; -- cgit v1.2.3 From dbe68bc9e82b6951ff88285ccffc191d872d9a01 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 15 Sep 2021 10:48:36 +0300 Subject: ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate") and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement") the slew-rate is enabled by default for each configured pin. The datasheet specifies at chapter "Output Driver AC Characteristics" that HSIO drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate setting but are rather calibrated against an external 1% resistor mounted on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal frequency and the external load, it is possible to adjust their target output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled at the moment in device tree). Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 30b67cad5f14..f3d6aaa3a78d 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -558,6 +558,7 @@ , , ; + slew-rate = <0>; bias-pull-up; }; @@ -565,6 +566,7 @@ pinmux = , , ; + slew-rate = <0>; bias-pull-up; }; }; @@ -576,6 +578,7 @@ , , ; + slew-rate = <0>; bias-pull-up; }; @@ -584,6 +587,7 @@ , , ; + slew-rate = <0>; bias-pull-up; }; }; @@ -595,11 +599,13 @@ , , ; + slew-rate = <0>; bias-pull-up; }; ck { pinmux = ; + slew-rate = <0>; bias-pull-up; }; }; -- cgit v1.2.3 From 9786cca4b477f2b2f9d573d474c929d87579b501 Mon Sep 17 00:00:00 2001 From: Heiko Thiery Date: Wed, 15 Sep 2021 14:03:26 +0200 Subject: arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 The buck2 output of the PMIC is the VDD core voltage of the cpu. Switching off this will poweroff the CPU. Add the 'regulator-always-on' property to avoid this. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Signed-off-by: Heiko Thiery Reviewed-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index d0456daefda8..9db9b90bf2bc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -102,6 +102,7 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <3125>; nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; -- cgit v1.2.3 From 8b94aa318aa746fbbc668d6b9b3ad812c835230c Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Wed, 15 Sep 2021 22:22:59 +0200 Subject: arm64: dts: ls1028a: fix eSDHC2 node On the LS1028A this instance of the eSDHC controller is intended for either an eMMC or eSDIO card. It doesn't provide a card detect pin and its IO voltage is fixed at 1.8V. Remove the bogus broken-cd property, instead add the non-removable property. Fix the voltage-ranges property and set it to 1.8V only. Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 343ecf0e8973..06b36cc65865 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -405,9 +405,9 @@ interrupts = ; clock-frequency = <0>; /* fixed up by bootloader */ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; - voltage-ranges = <1800 1800 3300 3300>; + voltage-ranges = <1800 1800>; sdhci,auto-cmd12; - broken-cd; + non-removable; little-endian; bus-width = <4>; status = "disabled"; -- cgit v1.2.3 From b44d52a50bc6f191f0ae03f65de8401f3ef039b3 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 3 Oct 2021 17:50:53 +0200 Subject: dsa: tag_dsa: Fix mask for trunked packets A packet received on a trunk will have bit 2 set in Forward DSA tagged frame. Bit 1 can be either 0 or 1 and is otherwise undefined and bit 0 indicates the frame CFI. Masking with 7 thus results in frames as being identified as being from a trunk when in fact they are not. Fix the mask to just look at bit 2. Fixes: 5b60dadb71db ("net: dsa: tag_dsa: Support reception of packets from LAG devices") Signed-off-by: Andrew Lunn Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/tag_dsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c index 77d0ce89ab77..e5127b7d1c6a 100644 --- a/net/dsa/tag_dsa.c +++ b/net/dsa/tag_dsa.c @@ -210,7 +210,7 @@ static struct sk_buff *dsa_rcv_ll(struct sk_buff *skb, struct net_device *dev, cmd = dsa_header[0] >> 6; switch (cmd) { case DSA_CMD_FORWARD: - trunk = !!(dsa_header[1] & 7); + trunk = !!(dsa_header[1] & 4); break; case DSA_CMD_TO_CPU: -- cgit v1.2.3 From 1dbdd99b511c966be9147ad72991a2856ac76f22 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Mon, 4 Oct 2021 16:22:07 +0900 Subject: block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output While debugging an issue we've found that $DEBUGFS/block/$disk/state doesn't decode QUEUE_FLAG_HCTX_ACTIVE but only displays its numerical value. Add QUEUE_FLAG(HCTX_ACTIVE) to the blk_queue_flag_name array so it'll get decoded properly. Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/4351076388918075bd80ef07756f9d2ce63be12c.1633332053.git.johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe --- block/blk-mq-debugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index 4b66d2776eda..3b38d15723de 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -129,6 +129,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(PCI_P2PDMA), QUEUE_FLAG_NAME(ZONE_RESETALL), QUEUE_FLAG_NAME(RQ_ALLOC_TIME), + QUEUE_FLAG_NAME(HCTX_ACTIVE), QUEUE_FLAG_NAME(NOWAIT), }; #undef QUEUE_FLAG_NAME -- cgit v1.2.3 From 206704a1fe0bcaaa036d3e90358bb168fac8bea1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 Aug 2021 16:38:14 +0200 Subject: media: atomisp: restore missing 'return' statement The input_system_configure_channel_sensor() function lost its final return code in a previous patch: drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c: In function 'input_system_configure_channel_sensor': drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1649:1: error: control reaches end of non-void function [-Werror=return-type] Restore what was there originally. Link: https://lore.kernel.org/linux-media/20210802143820.1150099-1-arnd@kernel.org Fixes: 728a5c64ae5f ("media: atomisp: remove dublicate code") Signed-off-by: Arnd Bergmann Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- .../staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c b/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c index 8e085dda0c18..712e01c37870 100644 --- a/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c +++ b/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c @@ -1646,6 +1646,8 @@ static input_system_err_t input_system_configure_channel_sensor( default: return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED; } + + return INPUT_SYSTEM_ERR_NO_ERROR; } // Test flags and set structure. -- cgit v1.2.3 From b2d70c0dbf2731a37d1c7bcc86ab2387954d5f56 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Sep 2021 14:35:12 +0200 Subject: dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value make dtbs_check: arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected According to the datasheet, the I2C address can be either 0x2c or 0x2d, depending on the ADDR control input. Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings") Signed-off-by: Geert Uytterhoeven Reviewed-by: Kieran Bingham Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index 1c2daf7c24cc..911564468c5e 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -18,7 +18,7 @@ properties: const: ti,sn65dsi86 reg: - const: 0x2d + enum: [ 0x2c, 0x2d ] enable-gpios: maxItems: 1 -- cgit v1.2.3 From 52f57396c75acd77ebcdf3d20aed24ed248e9f79 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 23 Aug 2021 17:45:01 +0300 Subject: i2c: mlxcpld: Fix criteria for frequency setting Value for getting frequency capability wrongly has been taken from register offset instead of register value. Fixes: 66b0c2846ba8 ("i2c: mlxcpld: Add support for I2C bus frequency setting") Signed-off-by: Vadim Pasternak Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mlxcpld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 4e0b7c2882ce..6d41c3db8a2b 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -495,7 +495,7 @@ mlxcpld_i2c_set_frequency(struct mlxcpld_i2c_priv *priv, return err; /* Set frequency only if it is not 100KHz, which is default. */ - switch ((data->reg & data->mask) >> data->bit) { + switch ((regval & data->mask) >> data->bit) { case MLXCPLD_I2C_FREQ_1000KHZ: freq = MLXCPLD_I2C_FREQ_1000KHZ_SET; break; -- cgit v1.2.3 From fa1049135c15b4930ce7ea757a81b1b78908f304 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 23 Aug 2021 17:45:02 +0300 Subject: i2c: mlxcpld: Modify register setting for 400KHz frequency Change setting for 400KHz frequency support by more accurate value. Fixes: 66b0c2846ba8 ("i2c: mlxcpld: Add support for I2C bus frequency setting") Signed-off-by: Vadim Pasternak Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mlxcpld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 6d41c3db8a2b..015e11c4663f 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -49,7 +49,7 @@ #define MLXCPLD_LPCI2C_NACK_IND 2 #define MLXCPLD_I2C_FREQ_1000KHZ_SET 0x04 -#define MLXCPLD_I2C_FREQ_400KHZ_SET 0x0f +#define MLXCPLD_I2C_FREQ_400KHZ_SET 0x0c #define MLXCPLD_I2C_FREQ_100KHZ_SET 0x42 enum mlxcpld_i2c_frequency { -- cgit v1.2.3 From c0b27c4869702bce47b5b4cd5ef6da833b36496d Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 4 Oct 2021 22:02:01 +0100 Subject: nfs: Fix kerneldoc warning shown up by W=1 Fix a kerneldoc warning in nfs due to documentation for a parameter that isn't present. Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: Trond Myklebust cc: Anna Schumaker cc: Mauro Carvalho Chehab cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 --- fs/nfs_common/grace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nfs_common/grace.c b/fs/nfs_common/grace.c index edec45831585..0a9b72685f98 100644 --- a/fs/nfs_common/grace.c +++ b/fs/nfs_common/grace.c @@ -42,7 +42,6 @@ EXPORT_SYMBOL_GPL(locks_start_grace); /** * locks_end_grace - * @net: net namespace that this lock manager belongs to * @lm: who this grace period is for * * Call this function to state that the given lock manager is ready to -- cgit v1.2.3 From dcb442b133642c507c81da6990860549b19d4e78 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 4 Oct 2021 22:04:33 +0100 Subject: afs: Fix kerneldoc warning shown up by W=1 Fix a kerneldoc warning in afs due to a partially documented internal function by removing the kerneldoc marker. Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: Marc Dionne cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 --- fs/afs/dir_silly.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/afs/dir_silly.c b/fs/afs/dir_silly.c index dae9a57d7ec0..45cfd50a9521 100644 --- a/fs/afs/dir_silly.c +++ b/fs/afs/dir_silly.c @@ -86,8 +86,8 @@ static int afs_do_silly_rename(struct afs_vnode *dvnode, struct afs_vnode *vnode return afs_do_sync_operation(op); } -/** - * afs_sillyrename - Perform a silly-rename of a dentry +/* + * Perform silly-rename of a dentry. * * AFS is stateless and the server doesn't know when the client is holding a * file open. To prevent application problems when a file is unlinked while -- cgit v1.2.3 From bc868036569e1d1bc21a5ba110430b03ac0fdb9e Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 4 Oct 2021 22:07:22 +0100 Subject: 9p: Fix a bunch of kerneldoc warnings shown up by W=1 Fix a bunch of kerneldoc warnings shown up by W=1 in the 9p filesystem: (1) Add/remove/fix kerneldoc parameters descriptions. (2) Move __add_fid() from between v9fs_fid_add() and its comment. (3) 9p's caches_show() doesn't really make sense as an API function, so remove the kerneldoc annotation. It's also not prefixed with 'v9fs_'. Also remove the kerneldoc markers from the 9p fscache wrappers. Signed-off-by: David Howells Reviewed-by: Dominique Martinet Reviewed-by: Jeff Layton cc: Mauro Carvalho Chehab cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 --- fs/9p/cache.c | 8 ++++---- fs/9p/fid.c | 14 +++++++------- fs/9p/v9fs.c | 8 +++----- fs/9p/vfs_addr.c | 14 +++++++++----- fs/9p/vfs_file.c | 33 ++++++++++++--------------------- fs/9p/vfs_inode.c | 24 ++++++++++++++++-------- fs/9p/vfs_inode_dotl.c | 11 +++++++++-- 7 files changed, 60 insertions(+), 52 deletions(-) diff --git a/fs/9p/cache.c b/fs/9p/cache.c index eb2151fb6049..1769a44f4819 100644 --- a/fs/9p/cache.c +++ b/fs/9p/cache.c @@ -23,7 +23,7 @@ struct fscache_netfs v9fs_cache_netfs = { .version = 0, }; -/** +/* * v9fs_random_cachetag - Generate a random tag to be associated * with a new cache session. * @@ -233,7 +233,7 @@ static void v9fs_vfs_readpage_complete(struct page *page, void *data, unlock_page(page); } -/** +/* * __v9fs_readpage_from_fscache - read a page from cache * * Returns 0 if the pages are in cache and a BIO is submitted, @@ -268,7 +268,7 @@ int __v9fs_readpage_from_fscache(struct inode *inode, struct page *page) } } -/** +/* * __v9fs_readpages_from_fscache - read multiple pages from cache * * Returns 0 if the pages are in cache and a BIO is submitted, @@ -308,7 +308,7 @@ int __v9fs_readpages_from_fscache(struct inode *inode, } } -/** +/* * __v9fs_readpage_to_fscache - write a page to the cache * */ diff --git a/fs/9p/fid.c b/fs/9p/fid.c index 9d9de62592be..b8863dd0de5c 100644 --- a/fs/9p/fid.c +++ b/fs/9p/fid.c @@ -19,18 +19,18 @@ #include "v9fs_vfs.h" #include "fid.h" +static inline void __add_fid(struct dentry *dentry, struct p9_fid *fid) +{ + hlist_add_head(&fid->dlist, (struct hlist_head *)&dentry->d_fsdata); +} + + /** * v9fs_fid_add - add a fid to a dentry * @dentry: dentry that the fid is being added to * @fid: fid to add * */ - -static inline void __add_fid(struct dentry *dentry, struct p9_fid *fid) -{ - hlist_add_head(&fid->dlist, (struct hlist_head *)&dentry->d_fsdata); -} - void v9fs_fid_add(struct dentry *dentry, struct p9_fid *fid) { spin_lock(&dentry->d_lock); @@ -67,7 +67,7 @@ static struct p9_fid *v9fs_fid_find_inode(struct inode *inode, kuid_t uid) /** * v9fs_open_fid_add - add an open fid to an inode - * @dentry: inode that the fid is being added to + * @inode: inode that the fid is being added to * @fid: fid to add * */ diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index cdb99507ef33..2e0fa7c932db 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -155,6 +155,7 @@ int v9fs_show_options(struct seq_file *m, struct dentry *root) /** * v9fs_parse_options - parse mount options into session structure * @v9ses: existing v9fs session information + * @opts: The mount option string * * Return 0 upon success, -ERRNO upon failure. */ @@ -542,12 +543,9 @@ extern int v9fs_error_init(void); static struct kobject *v9fs_kobj; #ifdef CONFIG_9P_FSCACHE -/** - * caches_show - list caches associated with a session - * - * Returns the size of buffer written. +/* + * List caches associated with a session */ - static ssize_t caches_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c index cce9ace651a2..1c4f1b39cc95 100644 --- a/fs/9p/vfs_addr.c +++ b/fs/9p/vfs_addr.c @@ -30,8 +30,7 @@ /** * v9fs_fid_readpage - read an entire page in from 9P - * - * @fid: fid being read + * @data: Opaque pointer to the fid being read * @page: structure to page * */ @@ -116,6 +115,8 @@ static int v9fs_vfs_readpages(struct file *filp, struct address_space *mapping, /** * v9fs_release_page - release the private state associated with a page + * @page: The page to be released + * @gfp: The caller's allocation restrictions * * Returns 1 if the page can be released, false otherwise. */ @@ -129,9 +130,9 @@ static int v9fs_release_page(struct page *page, gfp_t gfp) /** * v9fs_invalidate_page - Invalidate a page completely or partially - * - * @page: structure to page - * @offset: offset in the page + * @page: The page to be invalidated + * @offset: offset of the invalidated region + * @length: length of the invalidated region */ static void v9fs_invalidate_page(struct page *page, unsigned int offset, @@ -199,6 +200,8 @@ static int v9fs_vfs_writepage(struct page *page, struct writeback_control *wbc) /** * v9fs_launder_page - Writeback a dirty page + * @page: The page to be cleaned up + * * Returns 0 on success. */ @@ -219,6 +222,7 @@ static int v9fs_launder_page(struct page *page) /** * v9fs_direct_IO - 9P address space operation for direct I/O * @iocb: target I/O control block + * @iter: The data/buffer to use * * The presence of v9fs_direct_IO() in the address space ops vector * allowes open() O_DIRECT flags which would have failed otherwise. diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index aab5e6538660..246235ebdb70 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -359,14 +359,11 @@ out_err: } /** - * v9fs_file_read - read from a file - * @filp: file pointer to read - * @udata: user data buffer to read data into - * @count: size of buffer - * @offset: offset at which to read data + * v9fs_file_read_iter - read from a file + * @iocb: The operation parameters + * @to: The buffer to read into * */ - static ssize_t v9fs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) { @@ -388,11 +385,9 @@ v9fs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) } /** - * v9fs_file_write - write to a file - * @filp: file pointer to write - * @data: data buffer to write data from - * @count: size of buffer - * @offset: offset at which to write data + * v9fs_file_write_iter - write to a file + * @iocb: The operation parameters + * @from: The data to write * */ static ssize_t @@ -561,11 +556,9 @@ out_unlock: } /** - * v9fs_mmap_file_read - read from a file - * @filp: file pointer to read - * @data: user data buffer to read data into - * @count: size of buffer - * @offset: offset at which to read data + * v9fs_mmap_file_read_iter - read from a file + * @iocb: The operation parameters + * @to: The buffer to read into * */ static ssize_t @@ -576,11 +569,9 @@ v9fs_mmap_file_read_iter(struct kiocb *iocb, struct iov_iter *to) } /** - * v9fs_mmap_file_write - write to a file - * @filp: file pointer to write - * @data: data buffer to write data from - * @count: size of buffer - * @offset: offset at which to write data + * v9fs_mmap_file_write_iter - write to a file + * @iocb: The operation parameters + * @from: The data to write * */ static ssize_t diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 795706520b5e..08f48b70a741 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -218,7 +218,7 @@ v9fs_blank_wstat(struct p9_wstat *wstat) /** * v9fs_alloc_inode - helper function to allocate an inode - * + * @sb: The superblock to allocate the inode from */ struct inode *v9fs_alloc_inode(struct super_block *sb) { @@ -238,7 +238,7 @@ struct inode *v9fs_alloc_inode(struct super_block *sb) /** * v9fs_free_inode - destroy an inode - * + * @inode: The inode to be freed */ void v9fs_free_inode(struct inode *inode) @@ -343,7 +343,7 @@ error: * v9fs_get_inode - helper function to setup an inode * @sb: superblock * @mode: mode to setup inode with - * + * @rdev: The device numbers to set */ struct inode *v9fs_get_inode(struct super_block *sb, umode_t mode, dev_t rdev) @@ -369,7 +369,7 @@ struct inode *v9fs_get_inode(struct super_block *sb, umode_t mode, dev_t rdev) } /** - * v9fs_clear_inode - release an inode + * v9fs_evict_inode - Remove an inode from the inode cache * @inode: inode to release * */ @@ -665,14 +665,15 @@ error: /** * v9fs_vfs_create - VFS hook to create a regular file + * @mnt_userns: The user namespace of the mount + * @dir: The parent directory + * @dentry: The name of file to be created + * @mode: The UNIX file mode to set + * @excl: True if the file must not yet exist * * open(.., O_CREAT) is handled in v9fs_vfs_atomic_open(). This is only called * for mknod(2). * - * @dir: directory inode that is being created - * @dentry: dentry that is being deleted - * @mode: create permissions - * */ static int @@ -696,6 +697,7 @@ v9fs_vfs_create(struct user_namespace *mnt_userns, struct inode *dir, /** * v9fs_vfs_mkdir - VFS mkdir hook to create a directory + * @mnt_userns: The user namespace of the mount * @dir: inode that is being unlinked * @dentry: dentry that is being unlinked * @mode: mode for new directory @@ -900,10 +902,12 @@ int v9fs_vfs_rmdir(struct inode *i, struct dentry *d) /** * v9fs_vfs_rename - VFS hook to rename an inode + * @mnt_userns: The user namespace of the mount * @old_dir: old dir inode * @old_dentry: old dentry * @new_dir: new dir inode * @new_dentry: new dentry + * @flags: RENAME_* flags * */ @@ -1009,6 +1013,7 @@ done: /** * v9fs_vfs_getattr - retrieve file metadata + * @mnt_userns: The user namespace of the mount * @path: Object to query * @stat: metadata structure to populate * @request_mask: Mask of STATX_xxx flags indicating the caller's interests @@ -1050,6 +1055,7 @@ v9fs_vfs_getattr(struct user_namespace *mnt_userns, const struct path *path, /** * v9fs_vfs_setattr - set file metadata + * @mnt_userns: The user namespace of the mount * @dentry: file whose metadata to set * @iattr: metadata assignment structure * @@ -1285,6 +1291,7 @@ static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry, /** * v9fs_vfs_symlink - helper function to create symlinks + * @mnt_userns: The user namespace of the mount * @dir: directory inode containing symlink * @dentry: dentry for symlink * @symname: symlink data @@ -1340,6 +1347,7 @@ v9fs_vfs_link(struct dentry *old_dentry, struct inode *dir, /** * v9fs_vfs_mknod - create a special file + * @mnt_userns: The user namespace of the mount * @dir: inode destination for new link * @dentry: dentry for file * @mode: mode for creation diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c index e1c0240b51c0..01b9e1281a29 100644 --- a/fs/9p/vfs_inode_dotl.c +++ b/fs/9p/vfs_inode_dotl.c @@ -37,7 +37,10 @@ v9fs_vfs_mknod_dotl(struct user_namespace *mnt_userns, struct inode *dir, struct dentry *dentry, umode_t omode, dev_t rdev); /** - * v9fs_get_fsgid_for_create - Helper function to get the gid for creating a + * v9fs_get_fsgid_for_create - Helper function to get the gid for a new object + * @dir_inode: The directory inode + * + * Helper function to get the gid for creating a * new file system object. This checks the S_ISGID to determine the owning * group of the new file system object. */ @@ -211,12 +214,13 @@ int v9fs_open_to_dotl_flags(int flags) /** * v9fs_vfs_create_dotl - VFS hook to create files for 9P2000.L protocol. + * @mnt_userns: The user namespace of the mount * @dir: directory inode that is being created * @dentry: dentry that is being deleted * @omode: create permissions + * @excl: True if the file must not yet exist * */ - static int v9fs_vfs_create_dotl(struct user_namespace *mnt_userns, struct inode *dir, struct dentry *dentry, umode_t omode, bool excl) @@ -361,6 +365,7 @@ err_clunk_old_fid: /** * v9fs_vfs_mkdir_dotl - VFS mkdir hook to create a directory + * @mnt_userns: The user namespace of the mount * @dir: inode that is being unlinked * @dentry: dentry that is being unlinked * @omode: mode for new directory @@ -537,6 +542,7 @@ static int v9fs_mapped_iattr_valid(int iattr_valid) /** * v9fs_vfs_setattr_dotl - set file metadata + * @mnt_userns: The user namespace of the mount * @dentry: file whose metadata to set * @iattr: metadata assignment structure * @@ -816,6 +822,7 @@ v9fs_vfs_link_dotl(struct dentry *old_dentry, struct inode *dir, /** * v9fs_vfs_mknod_dotl - create a special file + * @mnt_userns: The user namespace of the mount * @dir: inode destination for new link * @dentry: dentry for file * @omode: mode for creation -- cgit v1.2.3 From d9e3f82279bfe8419f437a637ff37c075598bd91 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 4 Oct 2021 22:08:50 +0100 Subject: fscache: Fix some kerneldoc warnings shown up by W=1 Fix some kerneldoc warnings in the fscache driver that are shown up by W=1. Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: Mauro Carvalho Chehab cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 --- fs/fscache/object.c | 1 + fs/fscache/operation.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index f346a78f4bd6..7b9e7a366226 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -907,6 +907,7 @@ static void fscache_dequeue_object(struct fscache_object *object) * @object: The object to ask about * @data: The auxiliary data for the object * @datalen: The size of the auxiliary data + * @object_size: The size of the object according to the server. * * This function consults the netfs about the coherency state of an object. * The caller must be holding a ref on cookie->n_active (held by diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 433877107700..e002cdfaf3cc 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -22,7 +22,10 @@ static void fscache_operation_dummy_cancel(struct fscache_operation *op) /** * fscache_operation_init - Do basic initialisation of an operation + * @cookie: The cookie to operate on * @op: The operation to initialise + * @processor: The function to perform the operation + * @cancel: A function to handle operation cancellation * @release: The release function to assign * * Do basic initialisation of an operation. The caller must still set flags, -- cgit v1.2.3 From ef31499a87cf842bdf6719f44473d93e99d09fe2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Sep 2021 10:33:55 +0100 Subject: fscache: Remove an unused static variable The fscache object CREATE_OBJECT work state isn't ever referred to, so remove it and avoid the unused variable warning caused by W=1. Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: linux-fsdevel@vger.kernel.org cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/ # rfc v1 Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/ # rfc v2 --- fs/fscache/object.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 7b9e7a366226..6a675652129b 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -77,7 +77,6 @@ static WORK_STATE(INIT_OBJECT, "INIT", fscache_initialise_object); static WORK_STATE(PARENT_READY, "PRDY", fscache_parent_ready); static WORK_STATE(ABORT_INIT, "ABRT", fscache_abort_initialisation); static WORK_STATE(LOOK_UP_OBJECT, "LOOK", fscache_look_up_object); -static WORK_STATE(CREATE_OBJECT, "CRTO", fscache_look_up_object); static WORK_STATE(OBJECT_AVAILABLE, "AVBL", fscache_object_available); static WORK_STATE(JUMPSTART_DEPS, "JUMP", fscache_jumpstart_dependents); -- cgit v1.2.3 From 59a4e0d5511ba61353ea9a4efdb1b86c23ecf134 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Sat, 2 Oct 2021 17:21:20 -0700 Subject: RISC-V: Include clone3() on rv32 As far as I can tell this should be enabled on rv32 as well, I'm not sure why it's rv64-only. checksyscalls is complaining about our lack of clone3() on rv32. Fixes: 56ac5e213933 ("riscv: enable sys_clone3 syscall for rv64") Signed-off-by: Palmer Dabbelt Reviewed-by: Arnd Bergmann Acked-by: Christian Brauner Signed-off-by: Palmer Dabbelt --- arch/riscv/include/uapi/asm/unistd.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/riscv/include/uapi/asm/unistd.h b/arch/riscv/include/uapi/asm/unistd.h index 4b989ae15d59..8062996c2dfd 100644 --- a/arch/riscv/include/uapi/asm/unistd.h +++ b/arch/riscv/include/uapi/asm/unistd.h @@ -18,9 +18,10 @@ #ifdef __LP64__ #define __ARCH_WANT_NEW_STAT #define __ARCH_WANT_SET_GET_RLIMIT -#define __ARCH_WANT_SYS_CLONE3 #endif /* __LP64__ */ +#define __ARCH_WANT_SYS_CLONE3 + #include /* -- cgit v1.2.3 From bb8958d5dc79acbd071397abb57b8756375fe1ce Mon Sep 17 00:00:00 2001 From: Alexandre Ghiti Date: Sat, 18 Sep 2021 18:02:21 +0200 Subject: riscv: Flush current cpu icache before other cpus On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [] flush_icache_all+0x12/0x1a [ 0.000000] [] patch_text_nosync+0x26/0x32 [ 0.000000] [] ftrace_init_nop+0x52/0x8c [ 0.000000] [] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [] ftrace_init+0x80/0x130 [ 0.000000] [] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same. Signed-off-by: Alexandre Ghiti Fixes: fab957c11efe ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/cacheflush.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c index 094118663285..89f81067e09e 100644 --- a/arch/riscv/mm/cacheflush.c +++ b/arch/riscv/mm/cacheflush.c @@ -16,6 +16,8 @@ static void ipi_remote_fence_i(void *info) void flush_icache_all(void) { + local_flush_icache_all(); + if (IS_ENABLED(CONFIG_RISCV_SBI)) sbi_remote_fence_i(NULL); else -- cgit v1.2.3 From c5336400ca8b5f83123d965ce1eb9ac4a604cc95 Mon Sep 17 00:00:00 2001 From: John Garry Date: Thu, 30 Sep 2021 19:51:57 +0800 Subject: scsi: acornscsi: Remove scsi_cmd_to_tag() reference Commit 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges") mistakenly introduced a reference to function scsi_cmd_to_tag(). This function does not exist as it was removed from an earlier series version when I upstreamed the named commit - originally authored By Hannes - but this reference still remained. Fix by replacing the reference to scsi_cmd_to_tag() with scsi_cmd_to_rq(scsi_scmd)->tag, which scsi_cmd_to_tag() was a wrapper for. Link: https://lore.kernel.org/r/1633002717-79765-1-git-send-email-john.garry@huawei.com Fixes: 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges") Reported-by: Arnd Bergmann Tested-by: Arnd Bergmann Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/acornscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index b4cb5fb19998..0cc62c1b0825 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -1776,7 +1776,7 @@ int acornscsi_reconnect_finish(AS_Host *host) host->scsi.disconnectable = 0; if (host->SCpnt->device->id == host->scsi.reconnected.target && host->SCpnt->device->lun == host->scsi.reconnected.lun && - scsi_cmd_to_tag(host->SCpnt) == host->scsi.reconnected.tag) { + scsi_cmd_to_rq(host->SCpnt)->tag == host->scsi.reconnected.tag) { #if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) DBG(host->SCpnt, printk("scsi%d.%c: reconnected", host->host->host_no, acornscsi_target(host))); -- cgit v1.2.3 From f5ef336fd2e4c36dedae4e7ca66cf5349d6fda62 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 22 Sep 2021 12:10:59 +0300 Subject: scsi: ufs: core: Fix task management completion The UFS driver uses blk_mq_tagset_busy_iter() when identifying task management requests to complete, however blk_mq_tagset_busy_iter() doesn't work. blk_mq_tagset_busy_iter() only iterates requests dispatched by the block layer. That appears as if it might have started since commit 37f4a24c2469 ("blk-mq: centralise related handling into blk_mq_get_driver_tag") which removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init() which gets called: blk_get_request blk_mq_alloc_request __blk_mq_alloc_request blk_mq_rq_ctx_init Since UFS task management requests are not dispatched by the block layer, hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter() relies on finding requests using hctx->tags->rqs[rq->tag], UFS task management requests are never found by blk_mq_tagset_busy_iter(). By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal details of the block layer, which was fragile and subsequently got broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the driver keep track of task management requests. Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com Fixes: 1235fc569e0b ("scsi: ufs: core: Fix task management request completion timeout") Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Cc: stable@vger.kernel.org Tested-by: Bart Van Assche Reviewed-by: Bart Van Assche Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 52 ++++++++++++++++++++--------------------------- drivers/scsi/ufs/ufshcd.h | 1 + 2 files changed, 23 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 188de6f91050..95be7ecdfe10 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6377,27 +6377,6 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) return retval; } -struct ctm_info { - struct ufs_hba *hba; - unsigned long pending; - unsigned int ncpl; -}; - -static bool ufshcd_compl_tm(struct request *req, void *priv, bool reserved) -{ - struct ctm_info *const ci = priv; - struct completion *c; - - WARN_ON_ONCE(reserved); - if (test_bit(req->tag, &ci->pending)) - return true; - ci->ncpl++; - c = req->end_io_data; - if (c) - complete(c); - return true; -} - /** * ufshcd_tmc_handler - handle task management function completion * @hba: per adapter instance @@ -6408,18 +6387,24 @@ static bool ufshcd_compl_tm(struct request *req, void *priv, bool reserved) */ static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba) { - unsigned long flags; - struct request_queue *q = hba->tmf_queue; - struct ctm_info ci = { - .hba = hba, - }; + unsigned long flags, pending, issued; + irqreturn_t ret = IRQ_NONE; + int tag; + + pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); spin_lock_irqsave(hba->host->host_lock, flags); - ci.pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); - blk_mq_tagset_busy_iter(q->tag_set, ufshcd_compl_tm, &ci); + issued = hba->outstanding_tasks & ~pending; + for_each_set_bit(tag, &issued, hba->nutmrs) { + struct request *req = hba->tmf_rqs[tag]; + struct completion *c = req->end_io_data; + + complete(c); + ret = IRQ_HANDLED; + } spin_unlock_irqrestore(hba->host->host_lock, flags); - return ci.ncpl ? IRQ_HANDLED : IRQ_NONE; + return ret; } /** @@ -6542,9 +6527,9 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, ufshcd_hold(hba, false); spin_lock_irqsave(host->host_lock, flags); - blk_mq_start_request(req); task_tag = req->tag; + hba->tmf_rqs[req->tag] = req; treq->upiu_req.req_header.dword_0 |= cpu_to_be32(task_tag); memcpy(hba->utmrdl_base_addr + task_tag, treq, sizeof(*treq)); @@ -6585,6 +6570,7 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, } spin_lock_irqsave(hba->host->host_lock, flags); + hba->tmf_rqs[req->tag] = NULL; __clear_bit(task_tag, &hba->outstanding_tasks); spin_unlock_irqrestore(hba->host->host_lock, flags); @@ -9635,6 +9621,12 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) err = PTR_ERR(hba->tmf_queue); goto free_tmf_tag_set; } + hba->tmf_rqs = devm_kcalloc(hba->dev, hba->nutmrs, + sizeof(*hba->tmf_rqs), GFP_KERNEL); + if (!hba->tmf_rqs) { + err = -ENOMEM; + goto free_tmf_queue; + } /* Reset the attached device */ ufshcd_device_reset(hba); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index f0da5d3db1fa..41f6e06f9185 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -828,6 +828,7 @@ struct ufs_hba { struct blk_mq_tag_set tmf_tag_set; struct request_queue *tmf_queue; + struct request **tmf_rqs; struct uic_command *active_uic_cmd; struct mutex uic_cmd_mutex; -- cgit v1.2.3 From a013c71c6315d6e9d6364d12251b98c75c9a2861 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 4 Oct 2021 13:38:51 +0300 Subject: scsi: elx: efct: Delete stray unlock statement It's not holding the lock at this stage and the IRQ "flags" are not correct so it would restore something bogus. Delete the unlock statement. Link: https://lore.kernel.org/r/20211004103851.GE25015@kili Fixes: 3e6414003bf9 ("scsi: elx: efct: SCSI I/O handling routines") Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/elx/efct/efct_scsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/elx/efct/efct_scsi.c b/drivers/scsi/elx/efct/efct_scsi.c index 40fb3a724c76..cf2e41dd354c 100644 --- a/drivers/scsi/elx/efct/efct_scsi.c +++ b/drivers/scsi/elx/efct/efct_scsi.c @@ -32,7 +32,7 @@ efct_scsi_io_alloc(struct efct_node *node) struct efct *efct; struct efct_xport *xport; struct efct_io *io; - unsigned long flags = 0; + unsigned long flags; efct = node->efct; @@ -44,7 +44,6 @@ efct_scsi_io_alloc(struct efct_node *node) if (!io) { efc_log_err(efct, "IO alloc Failed\n"); atomic_add_return(1, &xport->io_alloc_failed_count); - spin_unlock_irqrestore(&node->active_ios_lock, flags); return NULL; } -- cgit v1.2.3 From 69a3a7bc7239170557dfc2c4ad5786a0c3d8759a Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 4 Oct 2021 16:12:10 -0700 Subject: scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer for a dereference operation. In the abort I/O routine, the driver miscasts a context pointer to the wrong data type and overwrites a single byte outside of the allocated space. This miscast is done in the abort I/O function handler because the handler works on both FC-GS and FC-LS commands. However, the code neglected to get the correct job location for the node. Fix this by acquiring the necessary node pointer from the correct job structure depending on the I/O type. Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_sli.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 78ce38d7251c..026a1196a54d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -12292,12 +12292,12 @@ void lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) { - struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) cmdiocb->context1; + struct lpfc_nodelist *ndlp = NULL; IOCB_t *irsp = &rspiocb->iocb; /* ELS cmd tag completes */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "0139 Ignoring ELS cmd tag x%x completion Data: " + "0139 Ignoring ELS cmd code x%x completion Data: " "x%x x%x x%x\n", irsp->ulpIoTag, irsp->ulpStatus, irsp->un.ulpWord[4], irsp->ulpTimeout); @@ -12305,10 +12305,13 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, * Deref the ndlp after free_iocb. sli_release_iocb will access the ndlp * if exchange is busy. */ - if (cmdiocb->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) + if (cmdiocb->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) { + ndlp = cmdiocb->context_un.ndlp; lpfc_ct_free_iocb(phba, cmdiocb); - else + } else { + ndlp = (struct lpfc_nodelist *) cmdiocb->context1; lpfc_els_free_iocb(phba, cmdiocb); + } lpfc_nlp_put(ndlp); } -- cgit v1.2.3 From 258aad75c62146453d03028a44f2f1590d58e1f6 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 4 Oct 2021 16:06:08 -0500 Subject: scsi: iscsi: Fix iscsi_task use after free Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com Fixes: d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 4683c183e9d4..5bc91d34df63 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2281,11 +2281,6 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) return FAILED; } - conn = session->leadconn; - iscsi_get_conn(conn->cls_conn); - conn->eh_abort_cnt++; - age = session->age; - spin_lock(&session->back_lock); task = (struct iscsi_task *)sc->SCp.ptr; if (!task || !task->sc) { @@ -2293,8 +2288,16 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) ISCSI_DBG_EH(session, "sc completed while abort in progress\n"); spin_unlock(&session->back_lock); - goto success; + spin_unlock_bh(&session->frwd_lock); + mutex_unlock(&session->eh_mutex); + return SUCCESS; } + + conn = session->leadconn; + iscsi_get_conn(conn->cls_conn); + conn->eh_abort_cnt++; + age = session->age; + ISCSI_DBG_EH(session, "aborting [sc %p itt 0x%x]\n", sc, task->itt); __iscsi_get_task(task); spin_unlock(&session->back_lock); -- cgit v1.2.3 From 5963e5262180129f1be7556bd96994b6e52f3178 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 4 Oct 2021 09:40:50 +0200 Subject: ALSA: usb-audio: Enable rate validation for Scarlett devices The Scarlett device series from Focusrite Novation seem requiring the sample rate validations as we've done for MOTU devices; otherwise the driver probes invalid audioformat entries that contain the sample rates that actually don't work, and this may result in an incomplete setup as reported recently. This patch adds the needed quirk flag for enabling the sample rate validation for Focusrite Novation devices. Fixes: fe773b8711e3 ("ALSA: usb-audio: workaround for iface reset issue") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214493 Link: https://lore.kernel.org/r/20211004074050.28241-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 6ee6d24c847f..889c855addfc 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1900,6 +1900,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_CTL_MSG_DELAY | QUIRK_FLAG_IFACE_DELAY), VENDOR_FLG(0x07fd, /* MOTU */ QUIRK_FLAG_VALIDATE_RATES), + VENDOR_FLG(0x1235, /* Focusrite Novation */ + QUIRK_FLAG_VALIDATE_RATES), VENDOR_FLG(0x152a, /* Thesycon devices */ QUIRK_FLAG_DSD_RAW), VENDOR_FLG(0x1de7, /* Phoenix Audio */ -- cgit v1.2.3 From 783f3db030563f7bcdfe2d26428af98ea1699a8e Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 28 Sep 2021 15:49:40 +0200 Subject: ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence Any pending interrupt can prevent entering standby based power off state. To avoid it, disable the GIC CPU interface. Fixes: 8148d2136002 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set") Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/pm-imx6.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 9244437cb1b9..f2ecca339910 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -619,6 +620,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata static void imx6_pm_stby_poweroff(void) { + gic_cpu_if_down(0); imx6_set_lpm(STOP_POWER_OFF); imx6q_suspend_finish(0); -- cgit v1.2.3 From 0432523f4807a83902857347bd73eb817ef0a742 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 22 Sep 2021 12:16:35 +0200 Subject: xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages Osstest has been suffering test failures for a little while from order-4 allocation failures, resulting from alloc_empty_pages() calling kcalloc(). As there's no need for physically contiguous space here, switch to kvcalloc(). Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/6d698901-98a4-05be-c421-bcd0713f5335@suse.com Signed-off-by: Juergen Gross --- drivers/xen/privcmd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 720a7b7abd46..a3f2031aa3d9 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -420,7 +420,7 @@ static int alloc_empty_pages(struct vm_area_struct *vma, int numpgs) int rc; struct page **pages; - pages = kcalloc(numpgs, sizeof(pages[0]), GFP_KERNEL); + pages = kvcalloc(numpgs, sizeof(pages[0]), GFP_KERNEL); if (pages == NULL) return -ENOMEM; @@ -428,7 +428,7 @@ static int alloc_empty_pages(struct vm_area_struct *vma, int numpgs) if (rc != 0) { pr_warn("%s Could not alloc %d pfns rc:%d\n", __func__, numpgs, rc); - kfree(pages); + kvfree(pages); return -ENOMEM; } BUG_ON(vma->vm_private_data != NULL); @@ -912,7 +912,7 @@ static void privcmd_close(struct vm_area_struct *vma) else pr_crit("unable to unmap MFN range: leaking %d pages. rc=%d\n", numpgs, rc); - kfree(pages); + kvfree(pages); } static vm_fault_t privcmd_fault(struct vm_fault *vmf) -- cgit v1.2.3 From e11423d6721dd63b23fb41ade5e8d0b448b17780 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 22 Sep 2021 12:17:48 +0200 Subject: xen/privcmd: fix error handling in mmap-resource processing xen_pfn_t is the same size as int only on 32-bit builds (and not even on Arm32). Hence pfns[] can't be used directly to read individual error values returned from xen_remap_domain_mfn_array(); every other error indicator would be skipped/ignored on 64-bit. Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/aa6d6a67-6889-338a-a910-51e889f792d5@suse.com Signed-off-by: Juergen Gross --- drivers/xen/privcmd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index a3f2031aa3d9..5af2a295e32f 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -803,11 +803,12 @@ static long privcmd_ioctl_mmap_resource(struct file *file, unsigned int domid = (xdata.flags & XENMEM_rsrc_acq_caller_owned) ? DOMID_SELF : kdata.dom; - int num; + int num, *errs = (int *)pfns; + BUILD_BUG_ON(sizeof(*errs) > sizeof(*pfns)); num = xen_remap_domain_mfn_array(vma, kdata.addr & PAGE_MASK, - pfns, kdata.num, (int *)pfns, + pfns, kdata.num, errs, vma->vm_page_prot, domid, vma->vm_private_data); @@ -817,7 +818,7 @@ static long privcmd_ioctl_mmap_resource(struct file *file, unsigned int i; for (i = 0; i < num; i++) { - rc = pfns[i]; + rc = errs[i]; if (rc < 0) break; } -- cgit v1.2.3 From 97315723c463679a9ecf803d6479fca24c3efda0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 22 Sep 2021 12:18:25 +0200 Subject: xen/privcmd: drop "pages" parameter from xen_remap_pfn() The function doesn't use it and all of its callers say in a comment that their respective arguments are to be non-NULL only in auto-translated mode. Since xen_remap_domain_mfn_array() isn't supposed to be used by non-PV, drop the parameter there as well. It was bogusly passed as non- NULL (PRIV_VMA_LOCKED) by its only caller anyway. For xen_remap_domain_gfn_range(), otoh, it's not clear at all why this wouldn't want / might not need to gain auto-translated support down the road, so the parameter is retained there despite now remaining unused (and the only caller passing NULL); correct a respective comment as well. Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/036ad8a2-46f9-ac3d-6219-bdc93ab9e10b@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/mmu_pv.c | 2 +- drivers/xen/privcmd.c | 5 ++--- include/xen/xen-ops.h | 15 ++++++--------- 3 files changed, 9 insertions(+), 13 deletions(-) diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 8d751939c6f3..3359c23573c5 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -2398,7 +2398,7 @@ static int remap_area_pfn_pte_fn(pte_t *ptep, unsigned long addr, void *data) int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, - unsigned int domid, bool no_translate, struct page **pages) + unsigned int domid, bool no_translate) { int err = 0; struct remap_data rmd; diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 5af2a295e32f..3369734108af 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -257,7 +257,7 @@ static long privcmd_ioctl_mmap(struct file *file, void __user *udata) LIST_HEAD(pagelist); struct mmap_gfn_state state; - /* We only support privcmd_ioctl_mmap_batch for auto translated. */ + /* We only support privcmd_ioctl_mmap_batch for non-auto-translated. */ if (xen_feature(XENFEAT_auto_translated_physmap)) return -ENOSYS; @@ -810,8 +810,7 @@ static long privcmd_ioctl_mmap_resource(struct file *file, kdata.addr & PAGE_MASK, pfns, kdata.num, errs, vma->vm_page_prot, - domid, - vma->vm_private_data); + domid); if (num < 0) rc = num; else if (num != kdata.num) { diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index db28e79b77ee..a3584a357f35 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -52,12 +52,12 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order); #if defined(CONFIG_XEN_PV) int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, - unsigned int domid, bool no_translate, struct page **pages); + unsigned int domid, bool no_translate); #else static inline int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, unsigned int domid, - bool no_translate, struct page **pages) + bool no_translate) { BUG(); return 0; @@ -134,7 +134,7 @@ static inline int xen_remap_domain_gfn_array(struct vm_area_struct *vma, */ BUG_ON(err_ptr == NULL); return xen_remap_pfn(vma, addr, gfn, nr, err_ptr, prot, domid, - false, pages); + false); } /* @@ -146,7 +146,6 @@ static inline int xen_remap_domain_gfn_array(struct vm_area_struct *vma, * @err_ptr: Returns per-MFN error status. * @prot: page protection mask * @domid: Domain owning the pages - * @pages: Array of pages if this domain has an auto-translated physmap * * @mfn and @err_ptr may point to the same buffer, the MFNs will be * overwritten by the error codes after they are mapped. @@ -157,14 +156,13 @@ static inline int xen_remap_domain_gfn_array(struct vm_area_struct *vma, static inline int xen_remap_domain_mfn_array(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *mfn, int nr, int *err_ptr, - pgprot_t prot, unsigned int domid, - struct page **pages) + pgprot_t prot, unsigned int domid) { if (xen_feature(XENFEAT_auto_translated_physmap)) return -EOPNOTSUPP; return xen_remap_pfn(vma, addr, mfn, nr, err_ptr, prot, domid, - true, pages); + true); } /* xen_remap_domain_gfn_range() - map a range of foreign frames @@ -188,8 +186,7 @@ static inline int xen_remap_domain_gfn_range(struct vm_area_struct *vma, if (xen_feature(XENFEAT_auto_translated_physmap)) return -EOPNOTSUPP; - return xen_remap_pfn(vma, addr, &gfn, nr, NULL, prot, domid, false, - pages); + return xen_remap_pfn(vma, addr, &gfn, nr, NULL, prot, domid, false); } int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, -- cgit v1.2.3 From 3518441dda666696707afe933586151c0fb29db0 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 4 Oct 2021 15:23:41 -0700 Subject: arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio Fix invalid M2_RST# gpio pinmux. Fixes: ef484dfcf6f7 ("arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 05cb60991fb9..d52686f4c059 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -647,7 +647,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index e77db4996e58..236f425e1570 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -633,7 +633,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ - MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */ MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ -- cgit v1.2.3 From 9172b5c4a778da1f855b2e3780b1afabb3cfd523 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:16:15 +0200 Subject: xen/x86: prevent PVH type from getting clobbered Like xen_start_flags, xen_domain_type gets set before .bss gets cleared. Hence this variable also needs to be prevented from getting put in .bss, which is possible because XEN_NATIVE is an enumerator evaluating to zero. Any use prior to init_hvm_pv_info() setting the variable again would lead to wrong decisions; one such case is xenboot_console_setup() when called as a result of "earlyprintk=xen". Use __ro_after_init as more applicable than either __section(".data") or __read_mostly. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/d301677b-6f22-5ae6-bd36-458e1f323d0b@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c79bd0af2e8c..f252faf5028f 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -52,9 +52,6 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); DEFINE_PER_CPU(uint32_t, xen_vcpu_id); EXPORT_PER_CPU_SYMBOL(xen_vcpu_id); -enum xen_domain_type xen_domain_type = XEN_NATIVE; -EXPORT_SYMBOL_GPL(xen_domain_type); - unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START; EXPORT_SYMBOL(machine_to_phys_mapping); unsigned long machine_to_phys_nr; @@ -69,9 +66,11 @@ __read_mostly int xen_have_vector_callback; EXPORT_SYMBOL_GPL(xen_have_vector_callback); /* - * NB: needs to live in .data because it's used by xen_prepare_pvh which runs - * before clearing the bss. + * NB: These need to live in .data or alike because they're used by + * xen_prepare_pvh() which runs before clearing the bss. */ +enum xen_domain_type __ro_after_init xen_domain_type = XEN_NATIVE; +EXPORT_SYMBOL_GPL(xen_domain_type); uint32_t xen_start_flags __section(".data") = 0; EXPORT_SYMBOL(xen_start_flags); -- cgit v1.2.3 From cae7d81a3730dfe08623f8c1083230c8d0987639 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:16:47 +0200 Subject: xen/x86: allow PVH Dom0 without XEN_PV=y Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0 to a new XEN_PV_DOM0. (I'm not convinced all are really / should really be PV-specific, but for starters I've tried to be conservative.) For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so without x2APIC support enabled in the kernel things aren't going to work very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT as of now.) Note that this then requires PVH Dom0 to be 64-bit, as X86_X2APIC depends on X86_64. In the course of this xen_running_on_version_or_later() needs to be available more broadly. Move it from a PV-specific to a generic file, considering that what it does isn't really PV-specific at all anyway. Note that xen/interface/version.h cannot be included on its own; in enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h first to resolve the apparently sole missing type (xen_ulong_t). Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/983bb72f-53df-b6af-14bd-5e088bd06a08@suse.com Signed-off-by: Juergen Gross --- arch/x86/include/asm/xen/pci.h | 11 +++++++---- arch/x86/pci/xen.c | 15 +++++++++------ arch/x86/xen/Kconfig | 19 ++++++++++++------- arch/x86/xen/Makefile | 2 +- arch/x86/xen/enlighten.c | 17 +++++++++++++++++ arch/x86/xen/enlighten_pv.c | 16 ---------------- arch/x86/xen/xen-ops.h | 2 +- drivers/xen/Kconfig | 4 ++-- 8 files changed, 49 insertions(+), 37 deletions(-) diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h index 3506d8c598c1..4557f7cb0fa6 100644 --- a/arch/x86/include/asm/xen/pci.h +++ b/arch/x86/include/asm/xen/pci.h @@ -14,16 +14,19 @@ static inline int pci_xen_hvm_init(void) return -1; } #endif -#if defined(CONFIG_XEN_DOM0) +#ifdef CONFIG_XEN_PV_DOM0 int __init pci_xen_initial_domain(void); -int xen_find_device_domain_owner(struct pci_dev *dev); -int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); -int xen_unregister_device_domain_owner(struct pci_dev *dev); #else static inline int __init pci_xen_initial_domain(void) { return -1; } +#endif +#ifdef CONFIG_XEN_DOM0 +int xen_find_device_domain_owner(struct pci_dev *dev); +int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); +int xen_unregister_device_domain_owner(struct pci_dev *dev); +#else static inline int xen_find_device_domain_owner(struct pci_dev *dev) { return -1; diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 3d41a09c2c14..5debe4ac6f81 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -113,7 +113,7 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, false /* no mapping of GSI to PIRQ */); } -#ifdef CONFIG_XEN_DOM0 +#ifdef CONFIG_XEN_PV_DOM0 static int xen_register_gsi(u32 gsi, int triggering, int polarity) { int rc, irq; @@ -261,7 +261,7 @@ error: return irq; } -#ifdef CONFIG_XEN_DOM0 +#ifdef CONFIG_XEN_PV_DOM0 static bool __read_mostly pci_seg_supported = true; static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) @@ -375,10 +375,10 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev) WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret); } } -#else /* CONFIG_XEN_DOM0 */ +#else /* CONFIG_XEN_PV_DOM0 */ #define xen_initdom_setup_msi_irqs NULL #define xen_initdom_restore_msi_irqs NULL -#endif /* !CONFIG_XEN_DOM0 */ +#endif /* !CONFIG_XEN_PV_DOM0 */ static void xen_teardown_msi_irqs(struct pci_dev *dev) { @@ -555,7 +555,7 @@ int __init pci_xen_hvm_init(void) return 0; } -#ifdef CONFIG_XEN_DOM0 +#ifdef CONFIG_XEN_PV_DOM0 int __init pci_xen_initial_domain(void) { int irq; @@ -583,6 +583,9 @@ int __init pci_xen_initial_domain(void) } return 0; } +#endif + +#ifdef CONFIG_XEN_DOM0 struct xen_device_domain_owner { domid_t domain; @@ -656,4 +659,4 @@ int xen_unregister_device_domain_owner(struct pci_dev *dev) return 0; } EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner); -#endif +#endif /* CONFIG_XEN_DOM0 */ diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index afc1da68b06d..6bcd3d8ca6ac 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -43,13 +43,9 @@ config XEN_PV_SMP def_bool y depends on XEN_PV && SMP -config XEN_DOM0 - bool "Xen PV Dom0 support" - default y - depends on XEN_PV && PCI_XEN && SWIOTLB_XEN - depends on X86_IO_APIC && ACPI && PCI - help - Support running as a Xen PV Dom0 guest. +config XEN_PV_DOM0 + def_bool y + depends on XEN_PV && XEN_DOM0 config XEN_PVHVM def_bool y @@ -86,3 +82,12 @@ config XEN_PVH def_bool n help Support for running as a Xen PVH guest. + +config XEN_DOM0 + bool "Xen Dom0 support" + default XEN_PV + depends on (XEN_PV && SWIOTLB_XEN) || (XEN_PVH && X86_64) + depends on X86_IO_APIC && ACPI && PCI + select X86_X2APIC if XEN_PVH && X86_64 + help + Support running as a Xen Dom0 guest. diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 40b5779fce21..4953260e281c 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -45,7 +45,7 @@ obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o -obj-$(CONFIG_XEN_DOM0) += vga.o +obj-$(CONFIG_XEN_PV_DOM0) += vga.o obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f252faf5028f..501466038075 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -10,6 +10,8 @@ #include #include +#include +#include #include #include @@ -257,6 +259,21 @@ int xen_vcpu_setup(int cpu) return ((per_cpu(xen_vcpu, cpu) == NULL) ? -ENODEV : 0); } +/* Check if running on Xen version (major, minor) or later */ +bool xen_running_on_version_or_later(unsigned int major, unsigned int minor) +{ + unsigned int version; + + if (!xen_domain()) + return false; + + version = HYPERVISOR_xen_version(XENVER_version, NULL); + if ((((version >> 16) == major) && ((version & 0xffff) >= minor)) || + ((version >> 16) > major)) + return true; + return false; +} + void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 6e0d0754f94f..e46953249e39 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -142,22 +142,6 @@ static void __init xen_pv_guest_late_init(void) #endif } -/* Check if running on Xen version (major, minor) or later */ -bool -xen_running_on_version_or_later(unsigned int major, unsigned int minor) -{ - unsigned int version; - - if (!xen_domain()) - return false; - - version = HYPERVISOR_xen_version(XENVER_version, NULL); - if ((((version >> 16) == major) && ((version & 0xffff) >= minor)) || - ((version >> 16) > major)) - return true; - return false; -} - static __read_mostly unsigned int cpuid_leaf5_ecx_val; static __read_mostly unsigned int cpuid_leaf5_edx_val; diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 8d7ec49a35fb..6d9b2b3e0c1c 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -109,7 +109,7 @@ static inline void xen_uninit_lock_cpu(int cpu) struct dom0_vga_console_info; -#ifdef CONFIG_XEN_DOM0 +#ifdef CONFIG_XEN_PV_DOM0 void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size); #else static inline void __init xen_init_vga(const struct dom0_vga_console_info *info, diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 22f5aff0c136..1b2c3aca6887 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -241,7 +241,7 @@ config XEN_PRIVCMD config XEN_ACPI_PROCESSOR tristate "Xen ACPI processor" - depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ + depends on XEN && XEN_PV_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ default m help This ACPI processor uploads Power Management information to the Xen @@ -259,7 +259,7 @@ config XEN_ACPI_PROCESSOR config XEN_MCE_LOG bool "Xen platform mcelog" - depends on XEN_DOM0 && X86_MCE + depends on XEN_PV_DOM0 && X86_MCE help Allow kernel fetching MCE error from Xen platform and converting it into Linux mcelog format for mcelog tools -- cgit v1.2.3 From adf330a7cd64a8bb959dc48a9c282285c1d5b4d5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:17:41 +0200 Subject: xen/x86: make "earlyprintk=xen" work better for PVH Dom0 The xen_hvm_early_write() path better wouldn't be taken in this case; while port 0xE9 can be used, the hypercall path is quite a bit more efficient. Put that first, as it may also work for DomU-s (see also xen_raw_console_write()). While there also bail from the function when the first domU_write_console() failed - later ones aren't going to succeed. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/4fd89dcb-cfc5-c740-2e94-bb271e432d3e@suse.com Signed-off-by: Juergen Gross --- drivers/tty/hvc/hvc_xen.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 92c9a476defc..ee7ea8d762fa 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -621,17 +621,16 @@ static void xenboot_write_console(struct console *console, const char *string, unsigned int linelen, off = 0; const char *pos; + if (dom0_write_console(0, string, len) >= 0) + return; + if (!xen_pv_domain()) { xen_hvm_early_write(0, string, len); return; } - dom0_write_console(0, string, len); - - if (xen_initial_domain()) + if (domU_write_console(0, "(early) ", 8) < 0) return; - - domU_write_console(0, "(early) ", 8); while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) -- cgit v1.2.3 From 8e24d9bfc44d3bd884669ef8b344112fe41c9826 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:18:12 +0200 Subject: xen/x86: allow "earlyprintk=xen" to work for PV Dom0 With preferred consoles "tty" and "hvc" announced as preferred, registering "xenboot" early won't result in use of the console: It also needs to be registered as preferred. Generalize this from being DomU- only so far. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/d4a34540-a476-df2c-bca6-732d0d58c5f0@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index e46953249e39..b1c0e06dcaa8 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1348,7 +1348,6 @@ asmlinkage __visible void __init xen_start_kernel(void) boot_params.hdr.hardware_subarch = X86_SUBARCH_XEN; if (!xen_initial_domain()) { - add_preferred_console("xenboot", 0, NULL); if (pci_xen) x86_init.pci.arch_init = pci_xen_init; x86_platform.set_legacy_features = @@ -1393,6 +1392,7 @@ asmlinkage __visible void __init xen_start_kernel(void) #endif } + add_preferred_console("xenboot", 0, NULL); if (!boot_params.screen_info.orig_video_isVGA) add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); -- cgit v1.2.3 From 42bc9716bc1df21b55b303fe243f8575b3af24f9 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:18:45 +0200 Subject: xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU xenboot_write_console() is dealing with these quite fine so I don't see why xenboot_console_setup() would return -ENOENT in this case. Adjust documentation accordingly. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/3d212583-700e-8b2d-727a-845ef33ac265@suse.com Signed-off-by: Juergen Gross --- Documentation/admin-guide/kernel-parameters.txt | 2 +- drivers/tty/hvc/hvc_xen.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index bdb22006f713..259d03fc38d1 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1255,7 +1255,7 @@ The VGA and EFI output is eventually overwritten by the real console. - The xen output can only be used by Xen PV guests. + The xen option can only be used in Xen domains. The sclp output can only be used on s390. diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index ee7ea8d762fa..f1c99b4b89b2 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -607,10 +607,8 @@ static int __init xenboot_console_setup(struct console *console, char *string) { static struct xencons_info xenboot; - if (xen_initial_domain()) + if (xen_initial_domain() || !xen_pv_domain()) return 0; - if (!xen_pv_domain()) - return -ENODEV; return xencons_info_pv_init(&xenboot, 0); } -- cgit v1.2.3 From 4d1ab432acc9391a5ae13c629dbb5882c29fd1b0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:19:16 +0200 Subject: xen/x86: generalize preferred console model from PV to PVH Dom0 Without announcing hvc0 as preferred it won't get used as long as tty0 gets registered earlier. This is particularly problematic with there not being any screen output for PVH Dom0 when the screen is in graphics mode, as the necessary information doesn't get conveyed yet from the hypervisor. Follow PV's model, but be conservative and do this for Dom0 only for now. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/582328b6-c86c-37f3-d802-5539b7a86736@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten.c | 12 ++++++++++++ arch/x86/xen/enlighten_pv.c | 8 +------- arch/x86/xen/enlighten_pvh.c | 3 +++ arch/x86/xen/xen-ops.h | 2 ++ 4 files changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 501466038075..c5b1fd606c6f 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -3,6 +3,7 @@ #ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG #include #endif +#include #include #include #include @@ -18,6 +19,7 @@ #include #include #include +#include #include "xen-ops.h" #include "smp.h" @@ -274,6 +276,16 @@ bool xen_running_on_version_or_later(unsigned int major, unsigned int minor) return false; } +void __init xen_add_preferred_consoles(void) +{ + add_preferred_console("xenboot", 0, NULL); + if (!boot_params.screen_info.orig_video_isVGA) + add_preferred_console("tty", 0, NULL); + add_preferred_console("hvc", 0, NULL); + if (boot_params.screen_info.orig_video_isVGA) + add_preferred_console("tty", 0, NULL); +} + void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index b1c0e06dcaa8..fb3095ba3bf1 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -1392,12 +1391,7 @@ asmlinkage __visible void __init xen_start_kernel(void) #endif } - add_preferred_console("xenboot", 0, NULL); - if (!boot_params.screen_info.orig_video_isVGA) - add_preferred_console("tty", 0, NULL); - add_preferred_console("hvc", 0, NULL); - if (boot_params.screen_info.orig_video_isVGA) - add_preferred_console("tty", 0, NULL); + xen_add_preferred_consoles(); #ifdef CONFIG_PCI /* PCI BIOS service won't work from a PV guest. */ diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index 0d5e34b9e6f9..9029c5ab60e2 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -36,6 +36,9 @@ void __init xen_pvh_init(struct boot_params *boot_params) pfn = __pa(hypercall_page); wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32)); + if (xen_initial_domain()) + x86_init.oem.arch_setup = xen_add_preferred_consoles; + xen_efi_init(boot_params); } diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 6d9b2b3e0c1c..524d1243a0ce 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -118,6 +118,8 @@ static inline void __init xen_init_vga(const struct dom0_vga_console_info *info, } #endif +void xen_add_preferred_consoles(void); + void __init xen_init_apic(void); #ifdef CONFIG_XEN_EFI -- cgit v1.2.3 From 079c4baa2aad05e8007faa24b2411c1457f60d74 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:19:48 +0200 Subject: xen/x86: hook up xen_banner() also for PVH This was effectively lost while dropping PVHv1 code. Move the function and arrange for it to be called the same way as done in PV mode. Clearly this then needs re-introducing the XENFEAT_mmu_pt_update_preserve_ad check that was recently removed, as that's a PV-only feature. Since the string pointed at by pv_info.name describes the mode, drop "paravirtualized" from the log message while moving the code. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/de03054d-a20d-2114-bb86-eec28e17b3b8@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten.c | 14 ++++++++++++++ arch/x86/xen/enlighten_pv.c | 11 ----------- arch/x86/xen/enlighten_pvh.c | 1 + arch/x86/xen/xen-ops.h | 1 + 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c5b1fd606c6f..57efb484e7df 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -261,6 +261,20 @@ int xen_vcpu_setup(int cpu) return ((per_cpu(xen_vcpu, cpu) == NULL) ? -ENODEV : 0); } +void __init xen_banner(void) +{ + unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL); + struct xen_extraversion extra; + + HYPERVISOR_xen_version(XENVER_extraversion, &extra); + + pr_info("Booting kernel on %s\n", pv_info.name); + pr_info("Xen version: %u.%u%s%s\n", + version >> 16, version & 0xffff, extra.extraversion, + xen_feature(XENFEAT_mmu_pt_update_preserve_ad) + ? " (preserve-AD)" : ""); +} + /* Check if running on Xen version (major, minor) or later */ bool xen_running_on_version_or_later(unsigned int major, unsigned int minor) { diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index fb3095ba3bf1..a7b7d674f500 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -108,17 +108,6 @@ struct tls_descs { */ static DEFINE_PER_CPU(struct tls_descs, shadow_tls_desc); -static void __init xen_banner(void) -{ - unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL); - struct xen_extraversion extra; - HYPERVISOR_xen_version(XENVER_extraversion, &extra); - - pr_info("Booting paravirtualized kernel on %s\n", pv_info.name); - pr_info("Xen version: %d.%d%s (preserve-AD)\n", - version >> 16, version & 0xffff, extra.extraversion); -} - static void __init xen_pv_init_platform(void) { populate_extra_pte(fix_to_virt(FIX_PARAVIRT_BOOTMAP)); diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index 9029c5ab60e2..b20bd5439837 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -38,6 +38,7 @@ void __init xen_pvh_init(struct boot_params *boot_params) if (xen_initial_domain()) x86_init.oem.arch_setup = xen_add_preferred_consoles; + x86_init.oem.banner = xen_banner; xen_efi_init(boot_params); } diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 524d1243a0ce..8bc8b72a205d 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -51,6 +51,7 @@ void __init xen_remap_memory(void); phys_addr_t __init xen_find_free_area(phys_addr_t size); char * __init xen_memory_setup(void); void __init xen_arch_setup(void); +void xen_banner(void); void xen_enable_sysenter(void); void xen_enable_syscall(void); void xen_vcpu_restore(void); -- cgit v1.2.3 From 59f7e5374175ce5d776efeb12a1e61cd6b1f82fb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:20:42 +0200 Subject: x86/PVH: adjust function/data placement Two of the variables can live in .init.data, allowing the open-coded placing in .data to go away. Another "variable" is used to communicate a size value only to very early assembly code, which hence can be both const and live in .init.*. Additionally two functions were lacking __init annotations. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/3b0bb22e-43f4-e459-c5cb-169f996b5669@suse.com Signed-off-by: Juergen Gross --- arch/x86/platform/pvh/enlighten.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/platform/pvh/enlighten.c b/arch/x86/platform/pvh/enlighten.c index 9ac7457f52a3..ed0442e35434 100644 --- a/arch/x86/platform/pvh/enlighten.c +++ b/arch/x86/platform/pvh/enlighten.c @@ -16,15 +16,15 @@ /* * PVH variables. * - * pvh_bootparams and pvh_start_info need to live in the data segment since + * pvh_bootparams and pvh_start_info need to live in a data segment since * they are used after startup_{32|64}, which clear .bss, are invoked. */ -struct boot_params pvh_bootparams __section(".data"); -struct hvm_start_info pvh_start_info __section(".data"); +struct boot_params __initdata pvh_bootparams; +struct hvm_start_info __initdata pvh_start_info; -unsigned int pvh_start_info_sz = sizeof(pvh_start_info); +const unsigned int __initconst pvh_start_info_sz = sizeof(pvh_start_info); -static u64 pvh_get_root_pointer(void) +static u64 __init pvh_get_root_pointer(void) { return pvh_start_info.rsdp_paddr; } @@ -107,7 +107,7 @@ void __init __weak xen_pvh_init(struct boot_params *boot_params) BUG(); } -static void hypervisor_specific_init(bool xen_guest) +static void __init hypervisor_specific_init(bool xen_guest) { if (xen_guest) xen_pvh_init(&pvh_bootparams); -- cgit v1.2.3 From 9c11112c0ec7ec322cd495320c3ab9fa8bdc1bbc Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 30 Sep 2021 14:21:13 +0200 Subject: xen/x86: adjust data placement Both xen_pvh and xen_start_flags get written just once early during init. Using the respective annotation then allows the open-coded placing in .data to go away. Additionally the former, like the latter, wants exporting, or else xen_pvh_domain() can't be used from modules. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/8155ed26-5a1d-c06f-42d8-596d26e75849@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/enlighten_pvh.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 57efb484e7df..95d970359e17 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL_GPL(xen_have_vector_callback); */ enum xen_domain_type __ro_after_init xen_domain_type = XEN_NATIVE; EXPORT_SYMBOL_GPL(xen_domain_type); -uint32_t xen_start_flags __section(".data") = 0; +uint32_t __ro_after_init xen_start_flags; EXPORT_SYMBOL(xen_start_flags); /* diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index b20bd5439837..bcae606bbc5c 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include +#include #include @@ -18,10 +19,11 @@ /* * PVH variables. * - * The variable xen_pvh needs to live in the data segment since it is used + * The variable xen_pvh needs to live in a data segment since it is used * after startup_{32|64} is invoked, which will clear the .bss segment. */ -bool xen_pvh __section(".data") = 0; +bool __ro_after_init xen_pvh; +EXPORT_SYMBOL_GPL(xen_pvh); void __init xen_pvh_init(struct boot_params *boot_params) { -- cgit v1.2.3 From 5aec98913095ed3b4424ed6c5fdeb6964e9734da Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 5 Oct 2021 14:35:14 +0800 Subject: ALSA: hda/realtek - ALC236 headset MIC recording issue In power save mode, the recording voice from headset mic will 2s more delay. Add this patch will solve this issue. [ minor coding style fix by tiwai ] Signed-off-by: Kailang Yang Tested-by: Kai-Heng Feng Cc: Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0331fae5525e..0689f43fc7af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -526,6 +526,8 @@ static void alc_shutup_pins(struct hda_codec *codec) struct alc_spec *spec = codec->spec; switch (codec->core.vendor_id) { + case 0x10ec0236: + case 0x10ec0256: case 0x10ec0283: case 0x10ec0286: case 0x10ec0288: @@ -3529,7 +3531,8 @@ static void alc256_shutup(struct hda_codec *codec) /* If disable 3k pulldown control for alc257, the Mic detection will not work correctly * when booting with headset plugged. So skip setting it for the codec alc257 */ - if (codec->core.vendor_id != 0x10ec0257) + if (spec->codec_variant != ALC269_TYPE_ALC257 && + spec->codec_variant != ALC269_TYPE_ALC256) alc_update_coef_idx(codec, 0x46, 0, 3 << 12); if (!spec->no_shutup_pins) -- cgit v1.2.3 From ffac30be2a06b2516b2ce2afa2dcb2cf8af65a52 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Mon, 6 Sep 2021 12:12:59 +0800 Subject: drm/i915/audio: Use BIOS provided value for RKL HDA link Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") makes HDMI audio on Lenovo P350 disappear. So in addition to TGL, extend the logic to RKL to use BIOS provided value to fix the regression. Fixes: 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") Reviewed-by: Kai Vehmanen Signed-off-by: Kai-Heng Feng Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com (cherry picked from commit c6b40ee330fe09b332715bb7ec1467e4fcbe2e65) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_audio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c index 532237588511..4e0f96bf6158 100644 --- a/drivers/gpu/drm/i915/display/intel_audio.c +++ b/drivers/gpu/drm/i915/display/intel_audio.c @@ -1308,8 +1308,9 @@ static void i915_audio_component_init(struct drm_i915_private *dev_priv) else aud_freq = aud_freq_init; - /* use BIOS provided value for TGL unless it is a known bad value */ - if (IS_TIGERLAKE(dev_priv) && aud_freq_init != AUD_FREQ_TGL_BROKEN) + /* use BIOS provided value for TGL and RKL unless it is a known bad value */ + if ((IS_TIGERLAKE(dev_priv) || IS_ROCKETLAKE(dev_priv)) && + aud_freq_init != AUD_FREQ_TGL_BROKEN) aud_freq = aud_freq_init; drm_dbg_kms(&dev_priv->drm, "use AUD_FREQ_CNTRL of 0x%x (init value 0x%x)\n", -- cgit v1.2.3 From 0c94777386495d6e0a9735d48ffd2abb8d680d7f Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 28 Jul 2021 14:41:31 +0200 Subject: drm/i915: Fix runtime pm handling in i915_gem_shrink MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We forgot to call intel_runtime_pm_put on error, fix it! Signed-off-by: Maarten Lankhorst Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.") Cc: Thomas Hellström Cc: Daniel Vetter Cc: # v5.13+ Reviewed-by: Thomas Hellström Reviewed-by: Niranjana Vishwanathapura Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-9-maarten.lankhorst@linux.intel.com (cherry picked from commit 239f3c2ee18376587026efecaea5250fa5926d20) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_shrinker.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c index e382b7f2353b..5ab136ffdeb2 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_shrinker.c @@ -118,7 +118,7 @@ i915_gem_shrink(struct i915_gem_ww_ctx *ww, intel_wakeref_t wakeref = 0; unsigned long count = 0; unsigned long scanned = 0; - int err; + int err = 0; /* CHV + VTD workaround use stop_machine(); need to trylock vm->mutex */ bool trylock_vm = !ww && intel_vm_no_concurrent_access_wa(i915); @@ -242,12 +242,15 @@ skip: list_splice_tail(&still_in_list, phase->list); spin_unlock_irqrestore(&i915->mm.obj_lock, flags); if (err) - return err; + break; } if (shrink & I915_SHRINK_BOUND) intel_runtime_pm_put(&i915->runtime_pm, wakeref); + if (err) + return err; + if (nr_scanned) *nr_scanned += scanned; return count; -- cgit v1.2.3 From a532cde31de3cae6ed60e60d6f9379771f652809 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Wed, 29 Sep 2021 16:28:27 +0300 Subject: drm/i915/tc: Fix TypeC port init/resume time sanitization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Atm during driver loading and system resume TypeC ports are accessed before their HW/SW state is synced. Move the TypeC port sanitization to the encoder's sync_state hook to fix this. v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well (Jose, Jani) Fixes: f9e76a6e68d3 ("drm/i915: Add an encoder hook to sanitize its state during init/resume") Cc: José Roberto de Souza Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com (cherry picked from commit 7194dc998dfffca096c30b3cd39625158608992d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/icl_dsi.c | 10 ++++++++-- drivers/gpu/drm/i915/display/intel_ddi.c | 8 +++++++- drivers/gpu/drm/i915/display/intel_display.c | 20 +++++--------------- 3 files changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c index 43ec7fcd3f5d..a3eae3f3eadc 100644 --- a/drivers/gpu/drm/i915/display/icl_dsi.c +++ b/drivers/gpu/drm/i915/display/icl_dsi.c @@ -1577,8 +1577,14 @@ static void gen11_dsi_sync_state(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc); - enum pipe pipe = intel_crtc->pipe; + struct intel_crtc *intel_crtc; + enum pipe pipe; + + if (!crtc_state) + return; + + intel_crtc = to_intel_crtc(crtc_state->uapi.crtc); + pipe = intel_crtc->pipe; /* wa verify 1409054076:icl,jsl,ehl */ if (DISPLAY_VER(dev_priv) == 11 && pipe == PIPE_B && diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 9903a78df896..bd184325d0c7 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3807,7 +3807,13 @@ void hsw_ddi_get_config(struct intel_encoder *encoder, static void intel_ddi_sync_state(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { - if (intel_crtc_has_dp_encoder(crtc_state)) + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + enum phy phy = intel_port_to_phy(i915, encoder->port); + + if (intel_phy_is_tc(i915, phy)) + intel_tc_port_sanitize(enc_to_dig_port(encoder)); + + if (crtc_state && intel_crtc_has_dp_encoder(crtc_state)) intel_dp_sync_state(encoder, crtc_state); } diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 134a6acbd8fb..17f44ffea586 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -13082,18 +13082,16 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) readout_plane_state(dev_priv); for_each_intel_encoder(dev, encoder) { + struct intel_crtc_state *crtc_state = NULL; + pipe = 0; if (encoder->get_hw_state(encoder, &pipe)) { - struct intel_crtc_state *crtc_state; - crtc = intel_get_crtc_for_pipe(dev_priv, pipe); crtc_state = to_intel_crtc_state(crtc->base.state); encoder->base.crtc = &crtc->base; intel_encoder_get_config(encoder, crtc_state); - if (encoder->sync_state) - encoder->sync_state(encoder, crtc_state); /* read out to slave crtc as well for bigjoiner */ if (crtc_state->bigjoiner) { @@ -13108,6 +13106,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) encoder->base.crtc = NULL; } + if (encoder->sync_state) + encoder->sync_state(encoder, crtc_state); + drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", encoder->base.base.id, encoder->base.name, @@ -13390,17 +13391,6 @@ intel_modeset_setup_hw_state(struct drm_device *dev, intel_modeset_readout_hw_state(dev); /* HW state is read out, now we need to sanitize this mess. */ - - /* Sanitize the TypeC port mode upfront, encoders depend on this */ - for_each_intel_encoder(dev, encoder) { - enum phy phy = intel_port_to_phy(dev_priv, encoder->port); - - /* We need to sanitize only the MST primary port. */ - if (encoder->type != INTEL_OUTPUT_DP_MST && - intel_phy_is_tc(dev_priv, phy)) - intel_tc_port_sanitize(enc_to_dig_port(encoder)); - } - get_encoder_power_domains(dev_priv); if (HAS_PCH_IBX(dev_priv)) -- cgit v1.2.3 From fdddf8c3a477f77b3a623f220e78d45e89fc50d5 Mon Sep 17 00:00:00 2001 From: Lukasz Majczak Date: Thu, 30 Sep 2021 15:46:06 +0200 Subject: drm/i915/bdb: Fix version check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+" the size of bdb_lfp_backlight_data structure has been increased, causing if-statement in the parse_lfp_backlight function that comapres this structure size to the one retrieved from BDB, always to fail for older revisions. This patch calculates expected size of the structure for a given BDB version and compares it with the value gathered from BDB. Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221) Fixes: d381baad29b4 ("drm/i915/vbt: Fix backlight parsing for VBT 234+") Tested-by: Lukasz Majczak Signed-off-by: Lukasz Majczak Reviewed-by: José Roberto de Souza Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com (cherry picked from commit 4378daf5d04eed59724e6d0e74755e17dce2e105) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_bios.c | 22 ++++++++++++++++------ drivers/gpu/drm/i915/display/intel_vbt_defs.h | 5 +++++ 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index e86e6ed2d3bf..fd71346aac7b 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -451,13 +451,23 @@ parse_lfp_backlight(struct drm_i915_private *i915, } i915->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; - if (bdb->version >= 191 && - get_blocksize(backlight_data) >= sizeof(*backlight_data)) { - const struct lfp_backlight_control_method *method; + if (bdb->version >= 191) { + size_t exp_size; - method = &backlight_data->backlight_control[panel_type]; - i915->vbt.backlight.type = method->type; - i915->vbt.backlight.controller = method->controller; + if (bdb->version >= 236) + exp_size = sizeof(struct bdb_lfp_backlight_data); + else if (bdb->version >= 234) + exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_234; + else + exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_191; + + if (get_blocksize(backlight_data) >= exp_size) { + const struct lfp_backlight_control_method *method; + + method = &backlight_data->backlight_control[panel_type]; + i915->vbt.backlight.type = method->type; + i915->vbt.backlight.controller = method->controller; + } } i915->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h index 330077c2e588..a2108a8f544d 100644 --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h @@ -814,6 +814,11 @@ struct lfp_brightness_level { u16 reserved; } __packed; +#define EXP_BDB_LFP_BL_DATA_SIZE_REV_191 \ + offsetof(struct bdb_lfp_backlight_data, brightness_level) +#define EXP_BDB_LFP_BL_DATA_SIZE_REV_234 \ + offsetof(struct bdb_lfp_backlight_data, brightness_precision_bits) + struct bdb_lfp_backlight_data { u8 entry_size; struct lfp_backlight_data_entry data[16]; -- cgit v1.2.3 From b2d73debfdc16b742e64948dc4461876af3f8c10 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 30 Sep 2021 22:09:42 +0300 Subject: drm/i915: Extend the async flip VT-d w/a to skl/bxt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like skl/bxt/derivatives also need the plane stride stretch w/a when using async flips and VT-d is enabled, or else we get corruption on screen. To my surprise this was even documented in bspec, but only as a note on the CHICHKEN_PIPESL register description rather than on the w/a list. So very much the same thing as on HSW/BDW, except the bits moved yet again. Cc: stable@vger.kernel.org Cc: Karthik B S Fixes: 55ea1cb178ef ("drm/i915: Enable async flips in i915") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper (cherry picked from commit d08df3b0bdb25546e86dc9a6c4e3ec0c43832299) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 664970f2bc62..4037030f0984 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -8193,6 +8193,11 @@ enum { #define HSW_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 3) #define HSW_FBCQ_DIS (1 << 22) #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0) +#define SKL_PLANE1_STRETCH_MAX_MASK REG_GENMASK(1, 0) +#define SKL_PLANE1_STRETCH_MAX_X8 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 0) +#define SKL_PLANE1_STRETCH_MAX_X4 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 1) +#define SKL_PLANE1_STRETCH_MAX_X2 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 2) +#define SKL_PLANE1_STRETCH_MAX_X1 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 3) #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) #define _CHICKEN_TRANS_A 0x420c0 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 65bc3709f54c..a725792d5248 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -76,6 +76,8 @@ struct intel_wm_config { static void gen9_init_clock_gating(struct drm_i915_private *dev_priv) { + enum pipe pipe; + if (HAS_LLC(dev_priv)) { /* * WaCompressedResourceDisplayNewHashMode:skl,kbl @@ -89,6 +91,16 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv) SKL_DE_COMPRESSED_HASH_MODE); } + for_each_pipe(dev_priv, pipe) { + /* + * "Plane N strech max must be programmed to 11b (x1) + * when Async flips are enabled on that plane." + */ + if (!IS_GEMINILAKE(dev_priv) && intel_vtd_active()) + intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PIPESL_1(pipe), + SKL_PLANE1_STRETCH_MAX_MASK, SKL_PLANE1_STRETCH_MAX_X1); + } + /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl,cfl */ intel_uncore_write(&dev_priv->uncore, CHICKEN_PAR1_1, intel_uncore_read(&dev_priv->uncore, CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); -- cgit v1.2.3 From 244f5d597e1ea519c2085fbd9819458688775e42 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 24 Sep 2021 10:28:58 +0100 Subject: firmware: arm_ffa: Add missing remove callback to ffa_bus_type Currently the arm_ffa firmware driver can be built as module and hence all the users of FFA driver. If any driver on the ffa bus is removed or unregistered, the remove callback on all the device bound to the driver being removed should be callback. For that to happen, we must register a remove callback on the ffa_bus which is currently missing. This results in the probe getting called again without the previous remove callback on a device which may result in kernel crash. Fix the issue by registering the remove callback on the FFA bus. Link: https://lore.kernel.org/r/20210924092859.3057562-1-sudeep.holla@arm.com Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Jens Wiklander Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/bus.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c index 00fe595a5bc8..f01348e6cf1c 100644 --- a/drivers/firmware/arm_ffa/bus.c +++ b/drivers/firmware/arm_ffa/bus.c @@ -49,6 +49,13 @@ static int ffa_device_probe(struct device *dev) return ffa_drv->probe(ffa_dev); } +static void ffa_device_remove(struct device *dev) +{ + struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver); + + ffa_drv->remove(to_ffa_dev(dev)); +} + static int ffa_device_uevent(struct device *dev, struct kobj_uevent_env *env) { struct ffa_device *ffa_dev = to_ffa_dev(dev); @@ -86,6 +93,7 @@ struct bus_type ffa_bus_type = { .name = "arm_ffa", .match = ffa_device_match, .probe = ffa_device_probe, + .remove = ffa_device_remove, .uevent = ffa_device_uevent, .dev_groups = ffa_device_attributes_groups, }; -- cgit v1.2.3 From eb7b52e6db7c21400b9b2d539f9343fb6e94bd94 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 24 Sep 2021 10:28:59 +0100 Subject: firmware: arm_ffa: Fix __ffa_devices_unregister When arm_ffa firmware driver module is unloaded or removed we call __ffa_devices_unregister on all the devices on the ffa bus. It must unregister all the devices instead it is currently just releasing the devices without unregistering. That is pure wrong as when we try to load the module back again, it will result in the kernel crash something like below. -->8 CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169 Hardware name: FVP Base RevC (DT) Call trace: dump_backtrace+0x0/0x1cc show_stack+0x18/0x64 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 sysfs_create_dir_ns+0xe4/0x140 kobject_add_internal+0x170/0x358 kobject_add+0x94/0x100 device_add+0x178/0x5f0 device_register+0x20/0x30 ffa_device_register+0x80/0xcc [ffa_module] ffa_setup_partitions+0x7c/0x108 [ffa_module] init_module+0x290/0x2dc [ffa_module] do_one_initcall+0xbc/0x230 do_init_module+0x58/0x304 load_module+0x15e0/0x1f68 __arm64_sys_finit_module+0xb8/0xf4 invoke_syscall+0x44/0x140 el0_svc_common+0xb4/0xf0 do_el0_svc+0x24/0x80 el0_svc+0x20/0x50 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a0/0x1a4 kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to register things with the same name in the same directory. ---- Fix the issue by calling device_unregister in __ffa_devices_unregister which will also take care of calling device_release(which is mapped to ffa_release_device) Link: https://lore.kernel.org/r/20210924092859.3057562-2-sudeep.holla@arm.com Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c index f01348e6cf1c..641a91819088 100644 --- a/drivers/firmware/arm_ffa/bus.c +++ b/drivers/firmware/arm_ffa/bus.c @@ -135,7 +135,7 @@ static void ffa_release_device(struct device *dev) static int __ffa_devices_unregister(struct device *dev, void *data) { - ffa_release_device(dev); + device_unregister(dev); return 0; } -- cgit v1.2.3 From a0e25f0a0d39d66c048d5dbac1e7ebaa6ec885d7 Mon Sep 17 00:00:00 2001 From: Dave Wysochanski Date: Sun, 3 Oct 2021 12:14:00 -0400 Subject: cachefiles: Fix oops with cachefiles_cull() due to NULL object When cachefiles_cull() calls cachefiles_bury_object(), it passes a NULL object. When this occurs, either trace_cachefiles_unlink() or trace_cachefiles_rename() may oops due to the NULL object. Check for NULL object in the tracepoint and if so, set debug_id to MAX_UINT as was done in 2908f5e101e3. The following oops was seen with xfstests generic/100. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_unlink+0x4e/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x242/0x430 [cachefiles] ? __vfs_removexattr_locked+0x10f/0x150 ? vfs_removexattr+0x51/0xd0 cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 The following oops was seen with xfstests generic/290. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_rename+0x54/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x35c/0x430 [cachefiles] cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski Signed-off-by: David Howells Link: https://listman.redhat.com/archives/linux-cachefs/2021-October/msg00009.html --- include/trace/events/cachefiles.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/trace/events/cachefiles.h b/include/trace/events/cachefiles.h index 695bfdbfdcad..920b6a303d60 100644 --- a/include/trace/events/cachefiles.h +++ b/include/trace/events/cachefiles.h @@ -178,7 +178,7 @@ TRACE_EVENT(cachefiles_unlink, ), TP_fast_assign( - __entry->obj = obj->fscache.debug_id; + __entry->obj = obj ? obj->fscache.debug_id : UINT_MAX; __entry->de = de; __entry->why = why; ), @@ -205,7 +205,7 @@ TRACE_EVENT(cachefiles_rename, ), TP_fast_assign( - __entry->obj = obj->fscache.debug_id; + __entry->obj = obj ? obj->fscache.debug_id : UINT_MAX; __entry->de = de; __entry->to = to; __entry->why = why; -- cgit v1.2.3 From 330de47d14af0c3995db81cc03cf5ca683d94d81 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 26 Jul 2021 10:37:57 +0100 Subject: netfs: Fix READ/WRITE confusion when calling iov_iter_xarray() Fix netfs_clear_unread() to pass READ to iov_iter_xarray() instead of WRITE (the flag is about the operation accessing the buffer, not what sort of access it is doing to the buffer). Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/162729351325.813557.9242842205308443901.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162886603464.3940407.3790841170414793899.stgit@warthog.procyon.org.uk Link: https://lore.kernel.org/r/163239074602.1243337.14154704004485867017.stgit@warthog.procyon.org.uk --- fs/netfs/read_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/netfs/read_helper.c b/fs/netfs/read_helper.c index 0b6cd3b8734c..994ec22d4040 100644 --- a/fs/netfs/read_helper.c +++ b/fs/netfs/read_helper.c @@ -150,7 +150,7 @@ static void netfs_clear_unread(struct netfs_read_subrequest *subreq) { struct iov_iter iter; - iov_iter_xarray(&iter, WRITE, &subreq->rreq->mapping->i_pages, + iov_iter_xarray(&iter, READ, &subreq->rreq->mapping->i_pages, subreq->start + subreq->transferred, subreq->len - subreq->transferred); iov_iter_zero(iov_iter_count(&iter), &iter); -- cgit v1.2.3 From 5c0522484eb54b90f2e46a5db8d7a4ff3ff86e5d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 12 Aug 2021 23:08:54 +0100 Subject: afs: Fix afs_launder_page() to set correct start file position Fix afs_launder_page() to set the starting position of the StoreData RPC at the offset into the page at which the modified data starts instead of at the beginning of the page (the iov_iter is correctly offset). The offset got lost during the conversion to passing an iov_iter into afs_store_data(). Changes: ver #2: - Use page_offset() rather than manually calculating it[1]. Fixes: bd80d8a80e12 ("afs: Use ITER_XARRAY for writing") Signed-off-by: David Howells Reviewed-by: Jeffrey Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/YST/0e92OdSH0zjg@casper.infradead.org/ [1] Link: https://lore.kernel.org/r/162880783179.3421678.7795105718190440134.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162937512409.1449272.18441473411207824084.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162981148752.1901565.3663780601682206026.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163005741670.2472992.2073548908229887941.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163221839087.3143591.14278359695763025231.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163292980654.4004896.7134735179887998551.stgit@warthog.procyon.org.uk/ # v2 --- fs/afs/write.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/afs/write.c b/fs/afs/write.c index 2dfe3b3a53d6..f24370f5c774 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -974,8 +974,7 @@ int afs_launder_page(struct page *page) iov_iter_bvec(&iter, WRITE, bv, 1, bv[0].bv_len); trace_afs_page_dirty(vnode, tracepoint_string("launder"), page); - ret = afs_store_data(vnode, &iter, (loff_t)page->index * PAGE_SIZE, - true); + ret = afs_store_data(vnode, &iter, page_offset(page) + f, true); } trace_afs_page_dirty(vnode, tracepoint_string("laundered"), page); -- cgit v1.2.3 From 7ff4034e910fe00a90d985f0d05bacf60c162f02 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 13:36:56 +0200 Subject: staging: vc04_services: shut up out-of-range warning The comparison against SIZE_MAX produces a harmless warning on 64-bit architectures: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:185:16: error: result of comparison of constant 419244183493398898 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (num_pages > (SIZE_MAX - sizeof(struct pagelist) - ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Shut up that warning by adding a cast to a longer type. Fixes: ca641bae6da9 ("staging: vc04_services: prevent integer overflow in create_pagelist()") Cc: stable Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210927113702.3866843-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c index b25369a13452..967f10b9582a 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -182,7 +182,7 @@ create_pagelist(char *buf, char __user *ubuf, offset = (uintptr_t)ubuf & (PAGE_SIZE - 1); num_pages = DIV_ROUND_UP(count + offset, PAGE_SIZE); - if (num_pages > (SIZE_MAX - sizeof(struct pagelist) - + if ((size_t)num_pages > (SIZE_MAX - sizeof(struct pagelist) - sizeof(struct vchiq_pagelist_info)) / (sizeof(u32) + sizeof(pages[0]) + sizeof(struct scatterlist))) -- cgit v1.2.3 From 37f12202c5d28291ba5f83ce229771447ce9148f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 30 Sep 2021 15:26:04 +0300 Subject: staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask() The problem is that "mac_id" is a u32 so this check for underflow does not work when "mac_id" is zero. In that situation, "mac_id - 1" is UINT_MAX instead of -1 so the condition is true. It leads to an array underflow on the next line. Fixes: 8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210930122604.GB10068@kili Signed-off-by: Greg Kroah-Hartman --- drivers/staging/r8188eu/hal/hal_intf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/r8188eu/hal/hal_intf.c b/drivers/staging/r8188eu/hal/hal_intf.c index a6d589e89aeb..f27eba72d646 100644 --- a/drivers/staging/r8188eu/hal/hal_intf.c +++ b/drivers/staging/r8188eu/hal/hal_intf.c @@ -248,7 +248,7 @@ void rtw_hal_update_ra_mask(struct adapter *adapt, u32 mac_id, u8 rssi_level) #ifdef CONFIG_88EU_AP_MODE struct sta_info *psta = NULL; struct sta_priv *pstapriv = &adapt->stapriv; - if ((mac_id - 1) > 0) + if (mac_id >= 2) psta = pstapriv->sta_aid[(mac_id - 1) - 1]; if (psta) add_RATid(adapt, psta, 0);/* todo: based on rssi_level*/ -- cgit v1.2.3 From 68c9cdf37a0456b7ba25a50b1ea8794f305da17f Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Sun, 29 Aug 2021 15:23:10 +0200 Subject: efi/libstub: Simplify "Exiting bootservices" message The message "Exiting boot services and installing virtual address map...\n" is even shown if we have efi=novamap on the command line or the firmware does not provide EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP. To avoid confusion just print "Exiting boot services...\n" Signed-off-by: Heinrich Schuchardt Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index 365c3a43a198..fe567be0f118 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -271,7 +271,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle, return status; } - efi_info("Exiting boot services and installing virtual address map...\n"); + efi_info("Exiting boot services...\n"); map.map = &memory_map; status = efi_allocate_pages(MAX_FDT_SIZE, new_fdt_addr, ULONG_MAX); -- cgit v1.2.3 From b3a72ca80351917cc23f9e24c35f3c3979d3c121 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 1 Sep 2021 08:33:19 +0200 Subject: efi/cper: use stack buffer for error record decoding Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it. Cc: Reported-by: Joe Perches Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/cper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c index 73bdbd207e7a..6ec8edec6329 100644 --- a/drivers/firmware/efi/cper.c +++ b/drivers/firmware/efi/cper.c @@ -25,8 +25,6 @@ #include #include -static char rcd_decode_str[CPER_REC_LEN]; - /* * CPER record ID need to be unique even after reboot, because record * ID is used as index for ERST storage, while CPER records from @@ -312,6 +310,7 @@ const char *cper_mem_err_unpack(struct trace_seq *p, struct cper_mem_err_compact *cmem) { const char *ret = trace_seq_buffer_ptr(p); + char rcd_decode_str[CPER_REC_LEN]; if (cper_mem_err_location(cmem, rcd_decode_str)) trace_seq_printf(p, "%s", rcd_decode_str); @@ -326,6 +325,7 @@ static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem, int len) { struct cper_mem_err_compact cmem; + char rcd_decode_str[CPER_REC_LEN]; /* Don't trust UEFI 2.1/2.2 structure with bad validation bits */ if (len == sizeof(struct cper_sec_mem_err_old) && -- cgit v1.2.3 From 38fa3206bf441911258e5001ac8b6738693f8d82 Mon Sep 17 00:00:00 2001 From: Zhang Jianhua Date: Thu, 23 Sep 2021 10:53:40 +0800 Subject: efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock() While reboot the system by sysrq, the following bug will be occur. BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G W O 5.10.0 #1 Call trace: dump_backtrace+0x0/0x1c8 show_stack+0x18/0x28 dump_stack+0xd0/0x110 ___might_sleep+0x14c/0x160 __might_sleep+0x74/0x88 down_interruptible+0x40/0x118 virt_efi_reset_system+0x3c/0xd0 efi_reboot+0xd4/0x11c machine_restart+0x60/0x9c emergency_restart+0x1c/0x2c sysrq_handle_reboot+0x1c/0x2c __handle_sysrq+0xd0/0x194 write_sysrq_trigger+0xbc/0xe4 proc_reg_write+0xd4/0xf0 vfs_write+0xa8/0x148 ksys_write+0x6c/0xd8 __arm64_sys_write+0x18/0x28 el0_svc_common.constprop.3+0xe4/0x16c do_el0_svc+0x1c/0x2c el0_svc+0x20/0x30 el0_sync_handler+0x80/0x17c el0_sync+0x158/0x180 The reason for this problem is that irq has been disabled in machine_restart() and then it calls down_interruptible() in virt_efi_reset_system(), which would occur sleep in irq context, it is dangerous! Commit 99409b935c9a("locking/semaphore: Add might_sleep() to down_*() family") add might_sleep() in down_interruptible(), so the bug info is here. down_trylock() can solve this problem, cause there is no might_sleep. -------- Cc: Signed-off-by: Zhang Jianhua Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/runtime-wrappers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index 1410beaef5c3..f3e54f6616f0 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -414,7 +414,7 @@ static void virt_efi_reset_system(int reset_type, unsigned long data_size, efi_char16_t *data) { - if (down_interruptible(&efi_runtime_lock)) { + if (down_trylock(&efi_runtime_lock)) { pr_warn("failed to invoke the reset_system() runtime service:\n" "could not get exclusive access to the firmware\n"); return; -- cgit v1.2.3 From 3f6cffb8604b537e3d7ea040d7f4368689638eaf Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 4 Oct 2021 16:01:40 -0700 Subject: etherdevice: use __dev_addr_set() Andrew points out that eth_hw_addr_set() replaces memcpy() calls so we can't use ether_addr_copy() which assumes both arguments are 2-bytes aligned. Reported-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 928c411bd509..c58d50451485 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -308,7 +308,7 @@ static inline void ether_addr_copy(u8 *dst, const u8 *src) */ static inline void eth_hw_addr_set(struct net_device *dev, const u8 *addr) { - ether_addr_copy(dev->dev_addr, addr); + __dev_addr_set(dev, addr, ETH_ALEN); } /** -- cgit v1.2.3 From baf33d7a75642b4b38a87fdf1cd96b506df4849f Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Mon, 4 Oct 2021 14:28:58 +0800 Subject: r8152: avoid to resubmit rx immediately For the situation that the disconnect event comes very late when the device is unplugged, the driver would resubmit the RX bulk transfer after getting the callback with -EPROTO immediately and continually. Finally, soft lockup occurs. This patch avoids to resubmit RX immediately. It uses a workqueue to schedule the RX NAPI. And the NAPI would resubmit the RX. It let the disconnect event have opportunity to stop the submission before soft lockup. Reported-by: Jason-ch Chen Tested-by: Jason-ch Chen Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 60ba9b734055..f329e39100a7 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -767,6 +767,7 @@ enum rtl8152_flags { PHY_RESET, SCHEDULE_TASKLET, GREEN_ETHERNET, + RX_EPROTO, }; #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082 @@ -1770,6 +1771,14 @@ static void read_bulk_callback(struct urb *urb) rtl_set_unplug(tp); netif_device_detach(tp->netdev); return; + case -EPROTO: + urb->actual_length = 0; + spin_lock_irqsave(&tp->rx_lock, flags); + list_add_tail(&agg->list, &tp->rx_done); + spin_unlock_irqrestore(&tp->rx_lock, flags); + set_bit(RX_EPROTO, &tp->flags); + schedule_delayed_work(&tp->schedule, 1); + return; case -ENOENT: return; /* the urb is in unlink state */ case -ETIME: @@ -2425,6 +2434,7 @@ static int rx_bottom(struct r8152 *tp, int budget) if (list_empty(&tp->rx_done)) goto out1; + clear_bit(RX_EPROTO, &tp->flags); INIT_LIST_HEAD(&rx_queue); spin_lock_irqsave(&tp->rx_lock, flags); list_splice_init(&tp->rx_done, &rx_queue); @@ -2441,7 +2451,7 @@ static int rx_bottom(struct r8152 *tp, int budget) agg = list_entry(cursor, struct rx_agg, list); urb = agg->urb; - if (urb->actual_length < ETH_ZLEN) + if (urb->status != 0 || urb->actual_length < ETH_ZLEN) goto submit; agg_free = rtl_get_free_rx(tp, GFP_ATOMIC); @@ -6643,6 +6653,10 @@ static void rtl_work_func_t(struct work_struct *work) netif_carrier_ok(tp->netdev)) tasklet_schedule(&tp->tx_tl); + if (test_and_clear_bit(RX_EPROTO, &tp->flags) && + !list_empty(&tp->rx_done)) + napi_schedule(&tp->napi); + mutex_unlock(&tp->control); out1: -- cgit v1.2.3 From 3ea75b3f57e5b2837b980a2cbcf014773d00ae51 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 5 Oct 2021 13:20:28 +0200 Subject: usb: xhci: tegra: mark PM functions as __maybe_unused The added #ifdefs in the PM rework were almost correct, but still cause warnings in some randconfig builds: drivers/usb/host/xhci-tegra.c:2147:12: error: 'tegra_xusb_resume' defined but not used [-Werror=unused-function] 2147 | static int tegra_xusb_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~ drivers/usb/host/xhci-tegra.c:2105:12: error: 'tegra_xusb_suspend' defined but not used [-Werror=unused-function] 2105 | static int tegra_xusb_suspend(struct device *dev) Replace the #ifdef checks with simpler __maybe_unused annotations to reliably shut up these warnings. Link: https://lore.kernel.org/all/20210421135613.3560777-2-arnd@kernel.org/ Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reviewed-by: JC Kuo Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211005112057.2700888-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 575fa89a783f..1bf494b649bd 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1787,7 +1787,6 @@ static int tegra_xusb_remove(struct platform_device *pdev) return 0; } -#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_PM_SLEEP) static bool xhci_hub_ports_suspended(struct xhci_hub *hub) { struct device *dev = hub->hcd->self.controller; @@ -2102,7 +2101,7 @@ out: return err; } -static int tegra_xusb_suspend(struct device *dev) +static __maybe_unused int tegra_xusb_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2144,7 +2143,7 @@ out: return err; } -static int tegra_xusb_resume(struct device *dev) +static __maybe_unused int tegra_xusb_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2174,10 +2173,8 @@ static int tegra_xusb_resume(struct device *dev) return 0; } -#endif -#ifdef CONFIG_PM -static int tegra_xusb_runtime_suspend(struct device *dev) +static __maybe_unused int tegra_xusb_runtime_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int ret; @@ -2190,7 +2187,7 @@ static int tegra_xusb_runtime_suspend(struct device *dev) return ret; } -static int tegra_xusb_runtime_resume(struct device *dev) +static __maybe_unused int tegra_xusb_runtime_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2201,7 +2198,6 @@ static int tegra_xusb_runtime_resume(struct device *dev) return err; } -#endif static const struct dev_pm_ops tegra_xusb_pm_ops = { SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend, -- cgit v1.2.3 From dbe0b88064494b7bb6a9b2aa7e085b14a3112d44 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Oct 2021 18:05:07 -0700 Subject: net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size() bridge_fill_linkxstats() is using nla_reserve_64bit(). We must use nla_total_size_64bit() instead of nla_total_size() for corresponding data structure. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Signed-off-by: Eric Dumazet Cc: Nikolay Aleksandrov Cc: Vivien Didelot Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 6c58fc14d2cb..29b8f6373fb9 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -1666,7 +1666,7 @@ static size_t br_get_linkxstats_size(const struct net_device *dev, int attr) } return numvls * nla_total_size(sizeof(struct bridge_vlan_xstats)) + - nla_total_size(sizeof(struct br_mcast_stats)) + + nla_total_size_64bit(sizeof(struct br_mcast_stats)) + nla_total_size(0); } -- cgit v1.2.3 From 0854a0513321cf70bea5fa483ebcaa983cc7c62e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Oct 2021 18:05:08 -0700 Subject: net: bridge: fix under estimation in br_get_linkxstats_size() Commit de1799667b00 ("net: bridge: add STP xstats") added an additional nla_reserve_64bit() in br_fill_linkxstats(), but forgot to update br_get_linkxstats_size() accordingly. This can trigger the following in rtnl_stats_get() WARN_ON(err == -EMSGSIZE); Fixes: de1799667b00 ("net: bridge: add STP xstats") Signed-off-by: Eric Dumazet Cc: Vivien Didelot Cc: Nikolay Aleksandrov Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 29b8f6373fb9..5c6c4305ed23 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -1667,6 +1667,7 @@ static size_t br_get_linkxstats_size(const struct net_device *dev, int attr) return numvls * nla_total_size(sizeof(struct bridge_vlan_xstats)) + nla_total_size_64bit(sizeof(struct br_mcast_stats)) + + (p ? nla_total_size_64bit(sizeof(p->stp_xstats)) : 0) + nla_total_size(0); } -- cgit v1.2.3 From 268bbde716e3a79a747a0f4ebbeb9f63d861737d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 4 Oct 2021 17:18:39 +0300 Subject: usb: dwc3: gadget: Revert "set gadgets parent to the right controller" The commit c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right controller") changed the device for the UDC and broke the user space scripts that instantiate the USB gadget(s) via ConfigFS. Revert it for now until the better solution will be proposed. Fixes: c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right controller") Tested-by: Ferry Toth Cc: Michael Grzeschik Cc: Felipe Balbi Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211004141839.49079-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 804b50548163..4519d06c9ca2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4243,7 +4243,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) } - usb_initialize_gadget(dwc->sysdev, dwc->gadget, dwc_gadget_release); + usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release); dev = &dwc->gadget->dev; dev->platform_data = dwc; dwc->gadget->ops = &dwc3_gadget_ops; -- cgit v1.2.3 From 4d1aa9112c8e6995ef2c8a76972c9671332ccfea Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 21 Sep 2021 16:34:42 +0200 Subject: Partially revert "usb: Kconfig: using select for USB_COMMON dependency" This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for USB_LED_TRIG. This config symbol has bool type and enables extra code in usb_common itself, not a separate driver. Enabling it should not force usb_common to be built-in! Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency") Cc: stable Signed-off-by: Ben Hutchings Signed-off-by: Salvatore Bonaccorso Link: https://lore.kernel.org/r/20210921143442.340087-1-carnil@debian.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/common/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig index 5e8a04e3dd3c..b856622431a7 100644 --- a/drivers/usb/common/Kconfig +++ b/drivers/usb/common/Kconfig @@ -6,8 +6,7 @@ config USB_COMMON config USB_LED_TRIG bool "USB LED Triggers" - depends on LEDS_CLASS && LEDS_TRIGGERS - select USB_COMMON + depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS help This option adds LED triggers for USB host and/or gadget activity. -- cgit v1.2.3 From a56d447f196fa9973c568f54c0d76d5391c3b0c0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Oct 2021 12:55:22 -0700 Subject: net/sched: sch_taprio: properly cancel timer from taprio_destroy() There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Signed-off-by: Eric Dumazet Cc: Davide Caratti Reported-by: syzbot Acked-by: Vinicius Costa Gomes Acked-by: Davide Caratti Signed-off-by: David S. Miller --- net/sched/sch_taprio.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index 1ab2fc933a21..b9fd18d98646 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -1641,6 +1641,10 @@ static void taprio_destroy(struct Qdisc *sch) list_del(&q->taprio_list); spin_unlock(&taprio_list_lock); + /* Note that taprio_reset() might not be called if an error + * happens in qdisc_create(), after taprio_init() has been called. + */ + hrtimer_cancel(&q->advance_timer); taprio_disable_offload(dev, q, NULL); -- cgit v1.2.3 From b87d8d0d4c43c29ccdc57d15b2ebc1df886a34b4 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 30 Sep 2021 15:47:58 +0300 Subject: usb: typec: tipd: Remove dependency on "connector" child fwnode There is no "connector" child node available on every platform, so the driver can't fail to probe when it's missing. Fixes: 57560ee95cb7 ("usb: typec: tipd: Don't block probing of consumer of "connector" nodes") Cc: stable@vger.kernel.org # 5.14+ Reported-by: "Regupathy, Rajaram" Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20210930124758.23233-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 21b3ae25c76d..ea4cc0a6e40c 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -625,10 +625,6 @@ static int tps6598x_probe(struct i2c_client *client) if (ret < 0) return ret; - fwnode = device_get_named_child_node(&client->dev, "connector"); - if (!fwnode) - return -ENODEV; - /* * This fwnode has a "compatible" property, but is never populated as a * struct device. Instead we simply parse it to read the properties. @@ -636,7 +632,9 @@ static int tps6598x_probe(struct i2c_client *client) * with existing DT files, we work around this by deleting any * fwnode_links to/from this fwnode. */ - fw_devlink_purge_absent_suppliers(fwnode); + fwnode = device_get_named_child_node(&client->dev, "connector"); + if (fwnode) + fw_devlink_purge_absent_suppliers(fwnode); tps->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(tps->role_sw)) { -- cgit v1.2.3 From 05300871c0e21c288bd5c30ac6f9b1da6ddeed22 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Sun, 26 Sep 2021 18:14:15 +0800 Subject: usb: typec: tcpci: don't handle vSafe0V event if it's not enabled USB TCPCI Spec, 4.4.3 Mask Registers: "A masked register will still indicate in the ALERT register, but shall not set the Alert# pin low." Thus, the Extended Status will still indicate in ALERT register if vSafe0V is detected by TCPC even though being masked. In current code, howerer, this event will not be handled in detection time. Rather it will be handled when next ALERT event coming(CC evnet, PD event, etc). Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V event should not be handled when it's masked. Fixes: 766c485b86ef ("usb: typec: tcpci: Add support to report vSafe0V") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20210926101415.3775058-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 9858716698df..c15eec9cc460 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -696,7 +696,7 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci) tcpm_pd_receive(tcpci->port, &msg); } - if (status & TCPC_ALERT_EXTENDED_STATUS) { + if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) { ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw); if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V)) tcpm_vbus_change(tcpci->port); -- cgit v1.2.3 From 6d91017a295e9790eec02c4e43f020cdb55f5d98 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Tue, 28 Sep 2021 19:16:39 +0800 Subject: usb: typec: tcpm: handle SRC_STARTUP state if cc changes TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state which is not satisfied with the Type-C spec. Per Type-C spec: DRP port should move to Unattached.SNK instead of Unattached.SRC if sink removed. Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20210928111639.3854174-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index a4d37205df54..7f2f3ff1b391 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4876,6 +4876,7 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, tcpm_set_state(port, SRC_ATTACH_WAIT, 0); break; case SRC_ATTACHED: + case SRC_STARTUP: case SRC_SEND_CAPABILITIES: case SRC_READY: if (tcpm_port_is_disconnected(port) || -- cgit v1.2.3 From 8253a34bfae3278baca52fc1209b7c29270486ca Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 21 Sep 2021 08:37:54 -0300 Subject: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Cc: stable@vger.kernel.org Reported-by: Heiko Thiery Tested-by: Frieder Schrempf Reviewed-by: Frieder Schrempf Acked-by: Peter Chen Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 8b7bc10b6e8b..f1d100671ee6 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -420,11 +420,16 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { ret = PTR_ERR(data->phy); - /* Return -EINVAL if no usbphy is available */ - if (ret == -ENODEV) - data->phy = NULL; - else - goto err_clk; + if (ret == -ENODEV) { + data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0); + if (IS_ERR(data->phy)) { + ret = PTR_ERR(data->phy); + if (ret == -ENODEV) + data->phy = NULL; + else + goto err_clk; + } + } } pdata.usb_phy = data->phy; -- cgit v1.2.3 From 04d2b75537085cb0c85d73a2e0e50317bffa883f Mon Sep 17 00:00:00 2001 From: Rikard Falkeborn Date: Wed, 29 Sep 2021 21:45:46 +0200 Subject: usb: cdc-wdm: Fix check for WWAN CONFIG_WWAN_CORE was with CONFIG_WWAN in commit 89212e160b81 ("net: wwan: Fix WWAN config symbols"), but did not update all users of it. Change it back to use CONFIG_WWAN instead. Fixes: 89212e160b81 ("net: wwan: Fix WWAN config symbols") Cc: Signed-off-by: Rikard Falkeborn Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20210929194547.46954-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 35d5908b5478..fdf79bcf7eb0 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -824,7 +824,7 @@ static struct usb_class_driver wdm_class = { }; /* --- WWAN framework integration --- */ -#ifdef CONFIG_WWAN_CORE +#ifdef CONFIG_WWAN static int wdm_wwan_port_start(struct wwan_port *port) { struct wdm_device *desc = wwan_port_get_drvdata(port); @@ -963,11 +963,11 @@ static void wdm_wwan_rx(struct wdm_device *desc, int length) /* inbuf has been copied, it is safe to check for outstanding data */ schedule_work(&desc->service_outs_intr); } -#else /* CONFIG_WWAN_CORE */ +#else /* CONFIG_WWAN */ static void wdm_wwan_init(struct wdm_device *desc) {} static void wdm_wwan_deinit(struct wdm_device *desc) {} static void wdm_wwan_rx(struct wdm_device *desc, int length) {} -#endif /* CONFIG_WWAN_CORE */ +#endif /* CONFIG_WWAN */ /* --- error handling --- */ static void wdm_rxwork(struct work_struct *work) -- cgit v1.2.3 From 0560c9c552c1815e7b480bc11fd785fefc82bb27 Mon Sep 17 00:00:00 2001 From: Pavel Hofman Date: Fri, 24 Sep 2021 10:00:27 +0200 Subject: usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize Async feedback patches broke enumeration on Windows 10 previously fixed by commit 789ea77310f0 ("usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot"). While the existing calculation for EP OUT capture for async mode yields size+1 frame due to uac2_opts->fb_max > 0, playback side lost the +1 feature. Therefore the +1 frame addition must be re-introduced for playback. Win10 enumerates the device only when both EP IN and EP OUT max packet sizes are (at least) +1 frame. Fixes: e89bb4288378 ("usb: gadget: u_audio: add real feedback implementation") Cc: stable Tested-by: Henrik Enquist Tested-by: Jack Pham Signed-off-by: Pavel Hofman Link: https://lore.kernel.org/r/20210924080027.5362-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_uac2.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index be864560bfea..ef55b8bb5870 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -674,11 +674,17 @@ static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, ssize = uac2_opts->c_ssize; } - if (!is_playback && (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) + if (!is_playback && (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) { + // Win10 requires max packet size + 1 frame srate = srate * (1000 + uac2_opts->fb_max) / 1000; - - max_size_bw = num_channels(chmask) * ssize * - DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))); + // updated srate is always bigger, therefore DIV_ROUND_UP always yields +1 + max_size_bw = num_channels(chmask) * ssize * + (DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)))); + } else { + // adding 1 frame provision for Win10 + max_size_bw = num_channels(chmask) * ssize * + (DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))) + 1); + } ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw, max_size_ep)); -- cgit v1.2.3 From 65a205e6113506e69a503b61d97efec43fc10fd7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 29 Sep 2021 11:09:36 +0200 Subject: USB: cdc-acm: fix racy tty buffer accesses A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4e2f1552f4b7..c7a1736720e7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -475,11 +475,16 @@ static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags) static void acm_process_read_urb(struct acm *acm, struct urb *urb) { + unsigned long flags; + if (!urb->actual_length) return; + spin_lock_irqsave(&acm->read_lock, flags); tty_insert_flip_string(&acm->port, urb->transfer_buffer, urb->actual_length); + spin_unlock_irqrestore(&acm->read_lock, flags); + tty_flip_buffer_push(&acm->port); } -- cgit v1.2.3 From 58fc1daa4d2e9789b9ffc880907c961ea7c062cc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 29 Sep 2021 11:09:37 +0200 Subject: USB: cdc-acm: fix break reporting A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c7a1736720e7..7b2e2420ecae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -340,6 +340,9 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) acm->iocount.overrun++; spin_unlock_irqrestore(&acm->read_lock, flags); + if (newctrl & ACM_CTRL_BRK) + tty_flip_buffer_push(&acm->port); + if (difference) wake_up_all(&acm->wioctl); -- cgit v1.2.3 From 1d58a17ef54599506d44c45ac95be27273a4d2b1 Mon Sep 17 00:00:00 2001 From: Quentin Perret Date: Tue, 5 Oct 2021 10:01:41 +0100 Subject: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). Fixes: 1025c8c0c6ac ("KVM: arm64: Wrap the host with a stage 2") Acked-by: Will Deacon Suggested-by: Will Deacon Signed-off-by: Quentin Perret Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005090155.734578-5-qperret@google.com --- arch/arm64/kvm/hyp/include/nvhe/gfp.h | 1 + arch/arm64/kvm/hyp/nvhe/mem_protect.c | 13 ++++++++++++- arch/arm64/kvm/hyp/nvhe/page_alloc.c | 14 ++++++++++++++ 3 files changed, 27 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h index fb0f523d1492..0a048dc06a7d 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h +++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h @@ -24,6 +24,7 @@ struct hyp_pool { /* Allocation */ void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order); +void hyp_split_page(struct hyp_page *page); void hyp_get_page(struct hyp_pool *pool, void *addr); void hyp_put_page(struct hyp_pool *pool, void *addr); diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index bacd493a4eac..34eeb524b686 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -35,7 +35,18 @@ const u8 pkvm_hyp_id = 1; static void *host_s2_zalloc_pages_exact(size_t size) { - return hyp_alloc_pages(&host_s2_pool, get_order(size)); + void *addr = hyp_alloc_pages(&host_s2_pool, get_order(size)); + + hyp_split_page(hyp_virt_to_page(addr)); + + /* + * The size of concatenated PGDs is always a power of two of PAGE_SIZE, + * so there should be no need to free any of the tail pages to make the + * allocation exact. + */ + WARN_ON(size != (PAGE_SIZE << get_order(size))); + + return addr; } static void *host_s2_zalloc_page(void *pool) diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c index 41fc25bdfb34..a6e874e61a40 100644 --- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c +++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c @@ -193,6 +193,20 @@ void hyp_get_page(struct hyp_pool *pool, void *addr) hyp_spin_unlock(&pool->lock); } +void hyp_split_page(struct hyp_page *p) +{ + unsigned short order = p->order; + unsigned int i; + + p->order = 0; + for (i = 1; i < (1 << order); i++) { + struct hyp_page *tail = p + i; + + tail->order = 0; + hyp_set_page_refcounted(tail); + } +} + void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order) { unsigned short i = order; -- cgit v1.2.3 From 7615c2a514788559c6684234b8fc27f3a843c2c6 Mon Sep 17 00:00:00 2001 From: Quentin Perret Date: Tue, 5 Oct 2021 10:01:42 +0100 Subject: KVM: arm64: Report corrupted refcount at EL2 Some of the refcount manipulation helpers used at EL2 are instrumented to catch a corrupted state, but not all of them are treated equally. Let's make things more consistent by instrumenting hyp_page_ref_dec_and_test() as well. Acked-by: Will Deacon Suggested-by: Will Deacon Signed-off-by: Quentin Perret Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005090155.734578-6-qperret@google.com --- arch/arm64/kvm/hyp/nvhe/page_alloc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c index a6e874e61a40..0bd7701ad1df 100644 --- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c +++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c @@ -152,6 +152,7 @@ static inline void hyp_page_ref_inc(struct hyp_page *p) static inline int hyp_page_ref_dec_and_test(struct hyp_page *p) { + BUG_ON(!p->refcount); p->refcount--; return (p->refcount == 0); } -- cgit v1.2.3 From beb76cb4eebf9ac4ff15312e33f97db621b46da7 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Tue, 5 Oct 2021 09:54:50 +0200 Subject: MAINTAINERS: rectify entry for SY8106A REGULATOR DRIVER Commit b1c36aae51c9 ("regulator: Convert SY8106A binding to a schema") converts sy8106a-regulator.txt to silergy,sy8106a.yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in SY8106A REGULATOR DRIVER. Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20211005075451.29691-11-lukas.bulwahn@gmail.com Signed-off-by: Mark Brown --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a61f4f3b78a9..5004a2bcbc9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17780,7 +17780,7 @@ F: net/switchdev/ SY8106A REGULATOR DRIVER M: Icenowy Zheng S: Maintained -F: Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt +F: Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml F: drivers/regulator/sy8106a-regulator.c SYNC FILE FRAMEWORK -- cgit v1.2.3 From 25a9da6641f1f66006e93ddbefee13a437efa8c0 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Mon, 4 Oct 2021 17:50:02 -0400 Subject: net: sfp: Fix typo in state machine debug string The string should be "tx_disable" to match the state enum. Fixes: 4005a7cb4f55 ("net: phy: sftp: print debug message with text, not numbers") Signed-off-by: Sean Anderson Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/sfp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 34e90216bd2c..ab77a9f439ef 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -134,7 +134,7 @@ static const char * const sm_state_strings[] = { [SFP_S_LINK_UP] = "link_up", [SFP_S_TX_FAULT] = "tx_fault", [SFP_S_REINIT] = "reinit", - [SFP_S_TX_DISABLE] = "rx_disable", + [SFP_S_TX_DISABLE] = "tx_disable", }; static const char *sm_state_to_str(unsigned short sm_state) -- cgit v1.2.3 From e3cf002d5a4452f8adc5543df341cf96fd702fcf Mon Sep 17 00:00:00 2001 From: Wong Vee Khee Date: Tue, 5 Oct 2021 11:45:21 +0800 Subject: net: pcs: xpcs: fix incorrect CL37 AN sequence According to Synopsys DesignWare Cores Ethernet PCS databook, it is required to disable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 0 if it is already enabled, before programming various fields of VR_MII_AN_CTRL registers. After all these programming are done, it is then required to enable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Cc: Vladimir Oltean Signed-off-by: Wong Vee Khee Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/pcs/pcs-xpcs.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c index fb0a83dc09ac..a3e806cfa684 100644 --- a/drivers/net/pcs/pcs-xpcs.c +++ b/drivers/net/pcs/pcs-xpcs.c @@ -697,14 +697,17 @@ EXPORT_SYMBOL_GPL(xpcs_config_eee); static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode) { - int ret; + int ret, mdio_ctrl; /* For AN for C37 SGMII mode, the settings are :- - * 1) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN) - * 2) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII) + * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case + it is already enabled) + * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN) + * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII) * DW xPCS used with DW EQoS MAC is always MAC side SGMII. - * 3) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic + * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic * speed/duplex mode change by HW after SGMII AN complete) + * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN) * * Note: Since it is MAC side SGMII, there is no need to set * SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from @@ -712,6 +715,17 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode) * between PHY and Link Partner. There is also no need to * trigger AN restart for MAC-side SGMII. */ + mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL); + if (mdio_ctrl < 0) + return mdio_ctrl; + + if (mdio_ctrl & AN_CL37_EN) { + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, + mdio_ctrl & ~AN_CL37_EN); + if (ret < 0) + return ret; + } + ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL); if (ret < 0) return ret; @@ -736,7 +750,15 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode) else ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; - return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret); + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret); + if (ret < 0) + return ret; + + if (phylink_autoneg_inband(mode)) + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, + mdio_ctrl | AN_CL37_EN); + + return ret; } static int xpcs_config_2500basex(struct dw_xpcs *xpcs) -- cgit v1.2.3 From 7707a4d01a648e4c655101a469c956cb11273655 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Oct 2021 14:24:15 -0700 Subject: netlink: annotate data races around nlk->bound While existing code is correct, KCSAN is reporting a data-race in netlink_insert / netlink_sendmsg [1] It is correct to read nlk->bound without a lock, as netlink_autobind() will acquire all needed locks. [1] BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0: netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597 netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842 netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2475 __do_sys_sendmsg net/socket.c:2484 [inline] __se_sys_sendmsg net/socket.c:2482 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1: netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] __sys_sendto+0x2a8/0x370 net/socket.c:2019 __do_sys_sendto net/socket.c:2031 [inline] __se_sys_sendto net/socket.c:2027 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2027 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: da314c9923fe ("netlink: Replace rhash_portid with bound") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 24b7cf447bc5..ada47e59647a 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -594,7 +594,10 @@ static int netlink_insert(struct sock *sk, u32 portid) /* We need to ensure that the socket is hashed and visible. */ smp_wmb(); - nlk_sk(sk)->bound = portid; + /* Paired with lockless reads from netlink_bind(), + * netlink_connect() and netlink_sendmsg(). + */ + WRITE_ONCE(nlk_sk(sk)->bound, portid); err: release_sock(sk); @@ -1012,7 +1015,8 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, if (nlk->ngroups < BITS_PER_LONG) groups &= (1UL << nlk->ngroups) - 1; - bound = nlk->bound; + /* Paired with WRITE_ONCE() in netlink_insert() */ + bound = READ_ONCE(nlk->bound); if (bound) { /* Ensure nlk->portid is up-to-date. */ smp_rmb(); @@ -1098,8 +1102,9 @@ static int netlink_connect(struct socket *sock, struct sockaddr *addr, /* No need for barriers here as we return to user-space without * using any of the bound attributes. + * Paired with WRITE_ONCE() in netlink_insert(). */ - if (!nlk->bound) + if (!READ_ONCE(nlk->bound)) err = netlink_autobind(sock); if (err == 0) { @@ -1888,7 +1893,8 @@ static int netlink_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) dst_group = nlk->dst_group; } - if (!nlk->bound) { + /* Paired with WRITE_ONCE() in netlink_insert() */ + if (!READ_ONCE(nlk->bound)) { err = netlink_autobind(sock); if (err) goto out; -- cgit v1.2.3 From 6e6a8ef088e1222cb1250942f51ad9c1ab219ab2 Mon Sep 17 00:00:00 2001 From: Quentin Perret Date: Tue, 5 Oct 2021 13:20:31 +0100 Subject: KVM: arm64: Release mmap_lock when using VM_SHARED with MTE VM_SHARED mappings are currently forbidden in a memslot with MTE to prevent two VMs racing to sanitise the same page. However, this check is performed while holding current->mm's mmap_lock, but fails to release it. Fix this by releasing the lock when needed. Fixes: ea7fc1bb1cd1 ("KVM: arm64: Introduce MTE VM feature") Signed-off-by: Quentin Perret Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005122031.809857-1-qperret@google.com --- arch/arm64/kvm/mmu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 1a94a7ca48f2..69bd1732a299 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -1529,8 +1529,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, * when updating the PG_mte_tagged page flag, see * sanitise_mte_tags for more details. */ - if (kvm_has_mte(kvm) && vma->vm_flags & VM_SHARED) - return -EINVAL; + if (kvm_has_mte(kvm) && vma->vm_flags & VM_SHARED) { + ret = -EINVAL; + break; + } if (vma->vm_flags & VM_PFNMAP) { /* IO region dirty page logging not allowed */ -- cgit v1.2.3 From cb2282213e84f04ab7e93fd4537815da5db2f010 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 24 Sep 2021 16:12:32 +0200 Subject: serial: 8250: allow disabling of Freescale 16550 compile test The SERIAL_8250_FSL option is used to enable a workaround for a break-detection erratum for Freescale 16550 UARTs in the 8250 driver and is currently also used to enable support for ACPI enumeration. It is enabled on PPC, ARM and ARM64 whenever 8250 console support is enabled (since the quirk is needed for sysrq handling). Commit b1442c55ce89 ("serial: 8250: extend compile-test coverage") enabled compile testing of the code in question but did not provide a means to disable the option when COMPILE_TEST is enabled. Add a conditional input prompt instead so that SERIAL_8250_FSL is no longer enabled by default when compile testing while continuing to always enable the quirk for platforms that may need it. Fixes: b1442c55ce89 ("serial: 8250: extend compile-test coverage") Reported-by: Geert Uytterhoeven Signed-off-by: Johan Hovold Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210924141232.4419-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 71ae16de0f90..39fc96dc2531 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -361,9 +361,13 @@ config SERIAL_8250_BCM2835AUX If unsure, say N. config SERIAL_8250_FSL - bool + bool "Freescale 16550 UART support" if COMPILE_TEST && !(PPC || ARM || ARM64) depends on SERIAL_8250_CONSOLE - default PPC || ARM || ARM64 || COMPILE_TEST + default PPC || ARM || ARM64 + help + Selecting this option enables a workaround for a break-detection + erratum for Freescale 16550 UARTs in the 8250 driver. It also + enables support for ACPI enumeration. config SERIAL_8250_DW tristate "Support for Synopsys DesignWare 8250 quirks" -- cgit v1.2.3 From dd6a2ed801db6afde68330cb529cf78550b7a937 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 15 Sep 2021 07:13:08 -0500 Subject: MAINTAINERS: Add Vignesh to TI K3 platform maintainership Add Vignesh to TI K3 platform maintainership. We will rotate roles for each kernel version to help spread the work load a little better. Signed-off-by: Nishanth Menon Link: https://lore.kernel.org/r/20210915121308.26795-1-nm@ti.com' Signed-off-by: Arnd Bergmann --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c6c1180d3473..ba032a30f54d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2713,6 +2713,7 @@ F: drivers/power/reset/keystone-reset.c ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE M: Nishanth Menon +M: Vignesh Raghavendra M: Tero Kristo L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported -- cgit v1.2.3 From b1e0c55a409955aba2d5a151f3f3a8bda8e45193 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Fri, 24 Sep 2021 17:47:04 +0300 Subject: fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release We don't need to maintain ntfs_posix_acl_release. Reviewed-by: Kari Argillander Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 83bbee277e12..253a07d9aa7b 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -475,12 +475,6 @@ out: } #ifdef CONFIG_NTFS3_FS_POSIX_ACL -static inline void ntfs_posix_acl_release(struct posix_acl *acl) -{ - if (acl && refcount_dec_and_test(&acl->a_refcount)) - kfree(acl); -} - static struct posix_acl *ntfs_get_acl_ex(struct user_namespace *mnt_userns, struct inode *inode, int type, int locked) @@ -641,7 +635,7 @@ static int ntfs_xattr_get_acl(struct user_namespace *mnt_userns, return -ENODATA; err = posix_acl_to_xattr(mnt_userns, acl, buffer, size); - ntfs_posix_acl_release(acl); + posix_acl_release(acl); return err; } @@ -678,7 +672,7 @@ static int ntfs_xattr_set_acl(struct user_namespace *mnt_userns, err = ntfs_set_acl(mnt_userns, inode, acl, type); release_and_out: - ntfs_posix_acl_release(acl); + posix_acl_release(acl); return err; } -- cgit v1.2.3 From d81e06be921f90d5f1bada59d4549ca6f1bedc61 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Fri, 24 Sep 2021 17:50:22 +0300 Subject: fs/ntfs3: Remove locked argument in ntfs_set_ea We always need to lock now, because locks became smaller (see d562e901f25d "fs/ntfs3: Move ni_lock_dir and ni_unlock into ntfs_create_inode"). Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 253a07d9aa7b..29f571b53083 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -257,7 +257,7 @@ out: static noinline int ntfs_set_ea(struct inode *inode, const char *name, size_t name_len, const void *value, - size_t val_size, int flags, int locked) + size_t val_size, int flags) { struct ntfs_inode *ni = ntfs_i(inode); struct ntfs_sb_info *sbi = ni->mi.sbi; @@ -276,8 +276,7 @@ static noinline int ntfs_set_ea(struct inode *inode, const char *name, u64 new_sz; void *p; - if (!locked) - ni_lock(ni); + ni_lock(ni); run_init(&ea_run); @@ -465,8 +464,7 @@ update_ea: mark_inode_dirty(&ni->vfs_inode); out: - if (!locked) - ni_unlock(ni); + ni_unlock(ni); run_close(&ea_run); kfree(ea_all); @@ -537,7 +535,7 @@ struct posix_acl *ntfs_get_acl(struct inode *inode, int type) static noinline int ntfs_set_acl_ex(struct user_namespace *mnt_userns, struct inode *inode, struct posix_acl *acl, - int type, int locked) + int type) { const char *name; size_t size, name_len; @@ -594,7 +592,7 @@ static noinline int ntfs_set_acl_ex(struct user_namespace *mnt_userns, flags = 0; } - err = ntfs_set_ea(inode, name, name_len, value, size, flags, locked); + err = ntfs_set_ea(inode, name, name_len, value, size, flags); if (err == -ENODATA && !size) err = 0; /* Removing non existed xattr. */ if (!err) @@ -612,7 +610,7 @@ out: int ntfs_set_acl(struct user_namespace *mnt_userns, struct inode *inode, struct posix_acl *acl, int type) { - return ntfs_set_acl_ex(mnt_userns, inode, acl, type, 0); + return ntfs_set_acl_ex(mnt_userns, inode, acl, type); } static int ntfs_xattr_get_acl(struct user_namespace *mnt_userns, @@ -693,7 +691,7 @@ int ntfs_init_acl(struct user_namespace *mnt_userns, struct inode *inode, if (default_acl) { err = ntfs_set_acl_ex(mnt_userns, inode, default_acl, - ACL_TYPE_DEFAULT, 1); + ACL_TYPE_DEFAULT); posix_acl_release(default_acl); } else { inode->i_default_acl = NULL; @@ -704,7 +702,7 @@ int ntfs_init_acl(struct user_namespace *mnt_userns, struct inode *inode, else { if (!err) err = ntfs_set_acl_ex(mnt_userns, inode, acl, - ACL_TYPE_ACCESS, 1); + ACL_TYPE_ACCESS); posix_acl_release(acl); } @@ -988,7 +986,7 @@ set_new_fa: } #endif /* Deal with NTFS extended attribute. */ - err = ntfs_set_ea(inode, name, name_len, value, size, flags, 0); + err = ntfs_set_ea(inode, name, name_len, value, size, flags); out: return err; @@ -1004,28 +1002,29 @@ int ntfs_save_wsl_perm(struct inode *inode) int err; __le32 value; + /* TODO: refactor this, so we don't lock 4 times in ntfs_set_ea */ value = cpu_to_le32(i_uid_read(inode)); err = ntfs_set_ea(inode, "$LXUID", sizeof("$LXUID") - 1, &value, - sizeof(value), 0, 0); + sizeof(value), 0); if (err) goto out; value = cpu_to_le32(i_gid_read(inode)); err = ntfs_set_ea(inode, "$LXGID", sizeof("$LXGID") - 1, &value, - sizeof(value), 0, 0); + sizeof(value), 0); if (err) goto out; value = cpu_to_le32(inode->i_mode); err = ntfs_set_ea(inode, "$LXMOD", sizeof("$LXMOD") - 1, &value, - sizeof(value), 0, 0); + sizeof(value), 0); if (err) goto out; if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { value = cpu_to_le32(inode->i_rdev); err = ntfs_set_ea(inode, "$LXDEV", sizeof("$LXDEV") - 1, &value, - sizeof(value), 0, 0); + sizeof(value), 0); if (err) goto out; } -- cgit v1.2.3 From cff32466bf851bf29cd491d8a3cbeb4dc4a36ab6 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Fri, 24 Sep 2021 17:53:56 +0300 Subject: fs/ntfs3: Refactoring of ntfs_set_ea Make code more readable. Don't try to read zero bytes. Add warning when size of exteneded attribute exceeds limit. Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 29f571b53083..cdc01877227a 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -75,6 +75,7 @@ static int ntfs_read_ea(struct ntfs_inode *ni, struct EA_FULL **ea, size_t add_bytes, const struct EA_INFO **info) { int err; + struct ntfs_sb_info *sbi = ni->mi.sbi; struct ATTR_LIST_ENTRY *le = NULL; struct ATTRIB *attr_info, *attr_ea; void *ea_p; @@ -99,10 +100,10 @@ static int ntfs_read_ea(struct ntfs_inode *ni, struct EA_FULL **ea, /* Check Ea limit. */ size = le32_to_cpu((*info)->size); - if (size > ni->mi.sbi->ea_max_size) + if (size > sbi->ea_max_size) return -EFBIG; - if (attr_size(attr_ea) > ni->mi.sbi->ea_max_size) + if (attr_size(attr_ea) > sbi->ea_max_size) return -EFBIG; /* Allocate memory for packed Ea. */ @@ -110,15 +111,16 @@ static int ntfs_read_ea(struct ntfs_inode *ni, struct EA_FULL **ea, if (!ea_p) return -ENOMEM; - if (attr_ea->non_res) { + if (!size) { + ; + } else if (attr_ea->non_res) { struct runs_tree run; run_init(&run); err = attr_load_runs(attr_ea, ni, &run, NULL); if (!err) - err = ntfs_read_run_nb(ni->mi.sbi, &run, 0, ea_p, size, - NULL); + err = ntfs_read_run_nb(sbi, &run, 0, ea_p, size, NULL); run_close(&run); if (err) @@ -366,21 +368,22 @@ static noinline int ntfs_set_ea(struct inode *inode, const char *name, new_ea->name[name_len] = 0; memcpy(new_ea->name + name_len + 1, value, val_size); new_pack = le16_to_cpu(ea_info.size_pack) + packed_ea_size(new_ea); - - /* Should fit into 16 bits. */ - if (new_pack > 0xffff) { - err = -EFBIG; // -EINVAL? - goto out; - } ea_info.size_pack = cpu_to_le16(new_pack); - /* New size of ATTR_EA. */ size += add; - if (size > sbi->ea_max_size) { + ea_info.size = cpu_to_le32(size); + + /* + * 1. Check ea_info.size_pack for overflow. + * 2. New attibute size must fit value from $AttrDef + */ + if (new_pack > 0xffff || size > sbi->ea_max_size) { + ntfs_inode_warn( + inode, + "The size of extended attributes must not exceed 64KiB"); err = -EFBIG; // -EINVAL? goto out; } - ea_info.size = cpu_to_le32(size); update_ea: -- cgit v1.2.3 From 94ad8aacbc2d4908b052c8bdb5ae13bc702f77ea Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:40:50 +0200 Subject: ARM: omap1: move omap15xx local bus handling to usb.c Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets") removed a lot of mach/memory.h, but left the USB offset handling split into arch/arm/mach-omap1/usb.c and drivers/usb/host/ohci-omap.c. This can cause a randconfig build warning that now fails the build with -Werror: arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable] 561 | static struct notifier_block omap_1510_usb_ohci_nb = { | ^~~~~~~~~~~~~~~~~~~~~ Move it all into the platform file to get rid of the final location that relies on mach/memory.h. Acked-by: Felipe Balbi Acked-by: Alan Stern Acked-by: Tony Lindgren Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- arch/arm/mach-omap1/include/mach/memory.h | 12 ---- arch/arm/mach-omap1/usb.c | 116 +++++++++++++++++++++--------- drivers/usb/host/ohci-omap.c | 72 +------------------ include/linux/platform_data/usb-omap1.h | 2 + 4 files changed, 86 insertions(+), 116 deletions(-) diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 36bc0000cb6a..ba3a350479c8 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -9,16 +9,4 @@ /* REVISIT: omap1 legacy drivers still rely on this */ #include -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - */ - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - #endif diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 86d3b3c157af..e60831c82b78 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -11,6 +11,7 @@ #include #include #include +#include #include @@ -206,8 +207,6 @@ static inline void udc_device_init(struct omap_usb_config *pdata) #endif -#if IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* The dmamask must be set for OHCI to work */ static u64 ohci_dmamask = ~(u32)0; @@ -236,20 +235,15 @@ static struct platform_device ohci_device = { static inline void ohci_device_init(struct omap_usb_config *pdata) { + if (!IS_ENABLED(CONFIG_USB_OHCI_HCD)) + return; + if (cpu_is_omap7xx()) ohci_resources[1].start = INT_7XX_USB_HHC_1; pdata->ohci_device = &ohci_device; pdata->ocpi_enable = &ocpi_enable; } -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - #if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) static struct resource otg_resources[] = { @@ -534,33 +528,87 @@ bad: } #ifdef CONFIG_ARCH_OMAP15XX +/* OMAP-1510 OHCI has its own MMU for DMA */ +#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ +#define OMAP1510_LB_CLOCK_DIV 0xfffec10c +#define OMAP1510_LB_MMU_CTL 0xfffec208 +#define OMAP1510_LB_MMU_LCK 0xfffec224 +#define OMAP1510_LB_MMU_LD_TLB 0xfffec228 +#define OMAP1510_LB_MMU_CAM_H 0xfffec22c +#define OMAP1510_LB_MMU_CAM_L 0xfffec230 +#define OMAP1510_LB_MMU_RAM_H 0xfffec234 +#define OMAP1510_LB_MMU_RAM_L 0xfffec238 -/* ULPD_DPLL_CTRL */ -#define DPLL_IOB (1 << 13) -#define DPLL_PLL_ENABLE (1 << 4) -#define DPLL_LOCK (1 << 0) +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) -/* ULPD_APLL_CTRL */ -#define APLL_NDPLL_SWITCH (1 << 0) +/* + * OMAP-1510 specific Local Bus clock on/off + */ +static int omap_1510_local_bus_power(int on) +{ + if (on) { + omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); + udelay(200); + } else { + omap_writel(0, OMAP1510_LB_MMU_CTL); + } -static int omap_1510_usb_ohci_notifier(struct notifier_block *nb, - unsigned long event, void *data) + return 0; +} + +/* + * OMAP-1510 specific Local Bus initialization + * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. + * See also arch/mach-omap/memory.h for __virt_to_dma() and + * __dma_to_virt() which need to match with the physical + * Local Bus address below. + */ +static int omap_1510_local_bus_init(void) { - struct device *dev = data; + unsigned int tlb; + unsigned long lbaddr, physaddr; + + omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, + OMAP1510_LB_CLOCK_DIV); + + /* Configure the Local Bus MMU table */ + for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { + lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; + physaddr = tlb * 0x00100000 + PHYS_OFFSET; + omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); + omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, + OMAP1510_LB_MMU_CAM_L); + omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); + omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); + omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); + omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); + } - if (event != BUS_NOTIFY_ADD_DEVICE) - return NOTIFY_DONE; + /* Enable the walking table */ + omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); + udelay(200); - if (strncmp(dev_name(dev), "ohci", 4) == 0 && - dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET, - (u64)-1)) - WARN_ONCE(1, "failed to set DMA offset\n"); - return NOTIFY_OK; + return 0; } -static struct notifier_block omap_1510_usb_ohci_nb = { - .notifier_call = omap_1510_usb_ohci_notifier, -}; +static void omap_1510_local_bus_reset(void) +{ + omap_1510_local_bus_power(1); + omap_1510_local_bus_init(); +} + +/* ULPD_DPLL_CTRL */ +#define DPLL_IOB (1 << 13) +#define DPLL_PLL_ENABLE (1 << 4) +#define DPLL_LOCK (1 << 0) + +/* ULPD_APLL_CTRL */ +#define APLL_NDPLL_SWITCH (1 << 0) static void __init omap_1510_usb_init(struct omap_usb_config *config) { @@ -616,19 +664,19 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) } #endif -#if IS_ENABLED(CONFIG_USB_OHCI_HCD) - if (config->register_host) { + if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) { int status; - bus_register_notifier(&platform_bus_type, - &omap_1510_usb_ohci_nb); ohci_device.dev.platform_data = config; + dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET, + OMAP1510_LB_OFFSET, (u64)-1); status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); /* hcd explicitly gates 48MHz */ + + config->lb_reset = omap_1510_local_bus_reset; } -#endif } #else diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 0b3722770760..ded9738392e4 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -40,17 +40,6 @@ #include -/* OMAP-1510 OHCI has its own MMU for DMA */ -#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ -#define OMAP1510_LB_CLOCK_DIV 0xfffec10c -#define OMAP1510_LB_MMU_CTL 0xfffec208 -#define OMAP1510_LB_MMU_LCK 0xfffec224 -#define OMAP1510_LB_MMU_LD_TLB 0xfffec228 -#define OMAP1510_LB_MMU_CAM_H 0xfffec22c -#define OMAP1510_LB_MMU_CAM_L 0xfffec230 -#define OMAP1510_LB_MMU_RAM_H 0xfffec234 -#define OMAP1510_LB_MMU_RAM_L 0xfffec238 - #define DRIVER_DESC "OHCI OMAP driver" struct ohci_omap_priv { @@ -104,61 +93,6 @@ static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on) return 0; } -#ifdef CONFIG_ARCH_OMAP15XX -/* - * OMAP-1510 specific Local Bus clock on/off - */ -static int omap_1510_local_bus_power(int on) -{ - if (on) { - omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); - udelay(200); - } else { - omap_writel(0, OMAP1510_LB_MMU_CTL); - } - - return 0; -} - -/* - * OMAP-1510 specific Local Bus initialization - * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. - * See also arch/mach-omap/memory.h for __virt_to_dma() and - * __dma_to_virt() which need to match with the physical - * Local Bus address below. - */ -static int omap_1510_local_bus_init(void) -{ - unsigned int tlb; - unsigned long lbaddr, physaddr; - - omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, - OMAP1510_LB_CLOCK_DIV); - - /* Configure the Local Bus MMU table */ - for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { - lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; - physaddr = tlb * 0x00100000 + PHYS_OFFSET; - omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); - omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, - OMAP1510_LB_MMU_CAM_L); - omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); - omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); - omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); - omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); - } - - /* Enable the walking table */ - omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); - udelay(200); - - return 0; -} -#else -#define omap_1510_local_bus_power(x) {} -#define omap_1510_local_bus_init() {} -#endif - #ifdef CONFIG_USB_OTG static void start_hnp(struct ohci_hcd *ohci) @@ -229,10 +163,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd) omap_ohci_clock_power(priv, 1); - if (cpu_is_omap15xx()) { - omap_1510_local_bus_power(1); - omap_1510_local_bus_init(); - } + if (config->lb_reset) + config->lb_reset(); ret = ohci_setup(hcd); if (ret < 0) diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h index 43b5ce139c37..878e572a78bf 100644 --- a/include/linux/platform_data/usb-omap1.h +++ b/include/linux/platform_data/usb-omap1.h @@ -48,6 +48,8 @@ struct omap_usb_config { u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); int (*ocpi_enable)(void); + + void (*lb_reset)(void); }; #endif /* __LINUX_USB_OMAP1_H */ -- cgit v1.2.3 From b9af50bcbcd2344640e4c2937bd2af1f856a4ced Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 11:53:33 +0200 Subject: ARM: dove: mark 'putc' as inline This can cause a randconfig warning without the 'inline' flag that every other platform uses: In file included from arch/arm/boot/compressed/misc.c:29: arch/arm/mach-dove/include/mach/uncompress.h:14:13: error: 'putc' defined but not used [-Werror=unused-function] 14 | static void putc(const char c) | ^~~~ Signed-off-by: Arnd Bergmann Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20210927095343.1015422-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- arch/arm/mach-dove/include/mach/uncompress.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h index 7a4bd8838036..ddf873f35e2b 100644 --- a/arch/arm/mach-dove/include/mach/uncompress.h +++ b/arch/arm/mach-dove/include/mach/uncompress.h @@ -11,7 +11,7 @@ #define LSR_THRE 0x20 -static void putc(const char c) +static inline void putc(const char c) { int i; @@ -24,7 +24,7 @@ static void putc(const char c) *UART_THR = c; } -static void flush(void) +static inline void flush(void) { } -- cgit v1.2.3 From a6949059318a064880050c76a9d8fb070156385f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 22 Sep 2021 22:09:33 +0200 Subject: ARM: defconfig: gemini: Restore framebuffer The framebuffer is gone on the D-Link DIR-685, restore it. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij Cc: Kees Cook Link: https://lore.kernel.org/r/20210922200933.1825752-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann --- arch/arm/configs/gemini_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig index d2d5f1cf815f..e6ff844821cf 100644 --- a/arch/arm/configs/gemini_defconfig +++ b/arch/arm/configs/gemini_defconfig @@ -76,6 +76,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_DRM=y CONFIG_DRM_PANEL_ILITEK_IL9322=y CONFIG_DRM_TVE200=y +CONFIG_FB=y CONFIG_LOGO=y CONFIG_USB=y CONFIG_USB_MON=y -- cgit v1.2.3 From 34186b48d29bb961b24ece417170e74289550a13 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:53:25 +0200 Subject: ARM: sharpsl_param: work around -Wstringop-overread warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc warns that accessing a pointer based on a numeric constant may be an offset into a NULL pointer, and would therefore has zero accessible bytes: arch/arm/common/sharpsl_param.c: In function ‘sharpsl_save_param’: arch/arm/common/sharpsl_param.c:43:9: error: ‘memcpy’ reading 64 bytes from a region of size 0 [-Werror=stringop-overread] 43 | memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In this particular case, the warning is bogus since this is the actual pointer, not an offset on a NULL pointer. Add a local variable to shut up the warning and hope it doesn't come back. Signed-off-by: Arnd Bergmann Acked-by: Daniel Mack Cc: Daniel Mack Cc: Haojian Zhuang Cc: Robert Jarzmik Cc: Russell King Cc: Linus Walleij Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578 Link: https://lore.kernel.org/r/20210927145332.2784005-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- arch/arm/common/sharpsl_param.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index efeb5724d9e9..6237ede2f0c7 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -40,7 +40,9 @@ EXPORT_SYMBOL(sharpsl_param); void sharpsl_save_param(void) { - memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info)); + struct sharpsl_param_info *params = param_start(PARAM_BASE); + + memcpy(&sharpsl_param, params, sizeof(*params)); if (sharpsl_param.comadj_keyword != COMADJ_MAGIC) sharpsl_param.comadj=-1; -- cgit v1.2.3 From a3e16937319aea285c64ab5bf8464470afac8dd3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Sep 2021 20:46:09 +0100 Subject: misc: gehc: Add SPI ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI ID table entry for the device name part of the compatible - currently only the full compatible is listed which isn't very idiomatic and won't match the modalias that is generated. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Cc: stable Tested-by: Martyn Welch Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20210923194609.52647-1-broonie@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/gehc-achc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/gehc-achc.c b/drivers/misc/gehc-achc.c index 02f33bc60c56..4c9c5394da6f 100644 --- a/drivers/misc/gehc-achc.c +++ b/drivers/misc/gehc-achc.c @@ -539,6 +539,7 @@ static int gehc_achc_probe(struct spi_device *spi) static const struct spi_device_id gehc_achc_id[] = { { "ge,achc", 0 }, + { "achc", 0 }, { } }; MODULE_DEVICE_TABLE(spi, gehc_achc_id); -- cgit v1.2.3 From 42641042c10c757fe10cc09088cf3f436cec5007 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 14:13:57 +0200 Subject: cb710: avoid NULL pointer subtraction clang-14 complains about an unusual way of converting a pointer to an integer: drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] return ((ptr - NULL) & 3) != 0; Replace this with a normal cast to uintptr_t. Fixes: 5f5bac8272be ("mmc: Driver for CB710/720 memory card reader (MMC part)") Cc: stable Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cb710/sgbuf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c index e5a4ed3701eb..a798fad5f03c 100644 --- a/drivers/misc/cb710/sgbuf2.c +++ b/drivers/misc/cb710/sgbuf2.c @@ -47,7 +47,7 @@ static inline bool needs_unaligned_copy(const void *ptr) #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS return false; #else - return ((ptr - NULL) & 3) != 0; + return ((uintptr_t)ptr & 3) != 0; #endif } -- cgit v1.2.3 From f9a470db2736b01538ad193c316eb3f26be37d58 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 22 Sep 2021 16:43:26 +0100 Subject: misc: fastrpc: Add missing lock before accessing find_vma() fastrpc driver is using find_vma() without any protection, as a result we see below warning due to recent patch 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()") which added mmap_assert_locked() in find_vma() function. This bug went un-noticed in previous versions. Fix this issue by adding required protection while calling find_vma(). CPU: 0 PID: 209746 Comm: benchmark_model Not tainted 5.15.0-rc2-00445-ge14fe2bf817a-dirty #969 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : find_vma+0x64/0xd0 lr : find_vma+0x60/0xd0 sp : ffff8000158ebc40 ... Call trace: find_vma+0x64/0xd0 fastrpc_internal_invoke+0x570/0xda8 fastrpc_device_ioctl+0x3e0/0x928 __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.3+0x70/0xf8 do_el0_svc+0x24/0x88 el0_svc+0x3c/0x138 el0t_64_sync_handler+0x90/0xb8 el0t_64_sync+0x180/0x184 Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210922154326.8927-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/fastrpc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index beda610e6b30..ad6ced454655 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -814,10 +814,12 @@ static int fastrpc_get_args(u32 kernel, struct fastrpc_invoke_ctx *ctx) rpra[i].pv = (u64) ctx->args[i].ptr; pages[i].addr = ctx->maps[i]->phys; + mmap_read_lock(current->mm); vma = find_vma(current->mm, ctx->args[i].ptr); if (vma) pages[i].addr += ctx->args[i].ptr - vma->vm_start; + mmap_read_unlock(current->mm); pg_start = (ctx->args[i].ptr & PAGE_MASK) >> PAGE_SHIFT; pg_end = ((ctx->args[i].ptr + len - 1) & PAGE_MASK) >> -- cgit v1.2.3 From 8241fffae7c8bab5cec5fc8bcaceccd03079e3aa Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 28 Sep 2021 20:04:10 +0300 Subject: fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files FALLOC_FL_PUNCH_HOLE isn't allowed with normal files. Filesystem must remember info about hole, but for normal file we can only zero it and forget. Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation") Now xfstests generic/016 generic/021 generic/022 pass. Signed-off-by: Konstantin Komarov --- fs/ntfs3/file.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 5fb3508e5422..43b1451bff53 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -587,8 +587,11 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) truncate_pagecache(inode, vbo_down); if (!is_sparsed(ni) && !is_compressed(ni)) { - /* Normal file. */ - err = ntfs_zero_range(inode, vbo, end); + /* + * Normal file, can't make hole. + * TODO: Try to find way to save info about hole. + */ + err = -EOPNOTSUPP; goto out; } -- cgit v1.2.3 From 97d8ebead87b7457ba5c4f4e7860b8fc8cf013fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 3 Oct 2021 17:16:41 -0700 Subject: misc: HI6421V600_IRQ should depend on HAS_IOMEM MFD_CORE depends on HAS_IOMEM so anything that selects MFD_CORE should also depend on HAS_IOMEM since 'select' does not check any dependencies of the symbol that is being selected. Prevents this kconfig warning: WARNING: unmet direct dependencies detected for MFD_CORE Depends on [n]: HAS_IOMEM [=n] Selected by [m]: - HI6421V600_IRQ [=m] && OF [=y] && SPMI [=m] Fixes: bb3b6552a5b0 ("staging: hikey9xx: split hi6421v600 irq into a separate driver") Cc: Mauro Carvalho Chehab Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20211004001641.23180-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 85ba901bc11b..0f5a49fc7c9e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -224,6 +224,7 @@ config HI6421V600_IRQ tristate "HiSilicon Hi6421v600 IRQ and powerkey" depends on OF depends on SPMI + depends on HAS_IOMEM select MFD_CORE select REGMAP_SPMI help -- cgit v1.2.3 From 9e2cd444909b3c93f5cc83463d12291e3e0f990b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Sep 2021 18:24:53 +0100 Subject: eeprom: at25: Add SPI ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20210923172453.4921-1-broonie@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/at25.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 4d09b672ac3c..632325474233 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -366,6 +366,13 @@ static const struct of_device_id at25_of_match[] = { }; MODULE_DEVICE_TABLE(of, at25_of_match); +static const struct spi_device_id at25_spi_ids[] = { + { .name = "at25",}, + { .name = "fm25",}, + { } +}; +MODULE_DEVICE_TABLE(spi, at25_spi_ids); + static int at25_probe(struct spi_device *spi) { struct at25_data *at25 = NULL; @@ -491,6 +498,7 @@ static struct spi_driver at25_driver = { .dev_groups = sernum_groups, }, .probe = at25_probe, + .id_table = at25_spi_ids, }; module_spi_driver(at25_driver); -- cgit v1.2.3 From 137879f7ff23c635d2c6b2e43f4b39e2d305c3e2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Sep 2021 19:40:48 +0100 Subject: eeprom: 93xx46: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20210922184048.34770-1-broonie@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/eeprom_93xx46.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index 29d8971ec558..660ee924f8b1 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -406,6 +406,23 @@ static const struct of_device_id eeprom_93xx46_of_table[] = { }; MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); +static const struct spi_device_id eeprom_93xx46_spi_ids[] = { + { .name = "eeprom-93xx46", + .driver_data = (kernel_ulong_t)&at93c46_data, }, + { .name = "at93c46", + .driver_data = (kernel_ulong_t)&at93c46_data, }, + { .name = "at93c46d", + .driver_data = (kernel_ulong_t)&atmel_at93c46d_data, }, + { .name = "at93c56", + .driver_data = (kernel_ulong_t)&at93c56_data, }, + { .name = "at93c66", + .driver_data = (kernel_ulong_t)&at93c66_data, }, + { .name = "93lc46b", + .driver_data = (kernel_ulong_t)µchip_93lc46b_data, }, + {} +}; +MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); + static int eeprom_93xx46_probe_dt(struct spi_device *spi) { const struct of_device_id *of_id = @@ -555,6 +572,7 @@ static struct spi_driver eeprom_93xx46_driver = { }, .probe = eeprom_93xx46_probe, .remove = eeprom_93xx46_remove, + .id_table = eeprom_93xx46_spi_ids, }; module_spi_driver(eeprom_93xx46_driver); -- cgit v1.2.3 From 45d65c0f09aaa6cdd21fe0743f317d4bbdfd1466 Mon Sep 17 00:00:00 2001 From: "Liu, Zhan" Date: Thu, 9 Sep 2021 13:26:37 -0400 Subject: drm/amd/display: Fix B0 USB-C DP Alt mode [Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu Acked-by: Rodrigo Siqueira Signed-off-by: Zhan Liu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70) --- .../drm/amd/display/dc/dcn10/dcn10_link_encoder.h | 1 + .../amd/display/dc/dcn31/dcn31_dio_link_encoder.c | 33 +++++++++++++++++++++- .../amd/display/dc/dcn31/dcn31_dio_link_encoder.h | 11 +++++++- .../amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h | 27 ++++++++++++++++++ 4 files changed, 70 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h index d8b22618b79e..c337588231ff 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h @@ -118,6 +118,7 @@ struct dcn10_link_enc_registers { uint32_t RDPCSTX_PHY_CNTL4; uint32_t RDPCSTX_PHY_CNTL5; uint32_t RDPCSTX_PHY_CNTL6; + uint32_t RDPCSPIPE_PHY_CNTL6; uint32_t RDPCSTX_PHY_CNTL7; uint32_t RDPCSTX_PHY_CNTL8; uint32_t RDPCSTX_PHY_CNTL9; diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c index 90127c1f9e35..d1870ac33143 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c @@ -37,6 +37,7 @@ #include "link_enc_cfg.h" #include "dc_dmub_srv.h" +#include "dal_asic_id.h" #define CTX \ enc10->base.ctx @@ -215,7 +216,7 @@ static const struct link_encoder_funcs dcn31_link_enc_funcs = { .fec_is_active = enc2_fec_is_active, .get_dig_frontend = dcn10_get_dig_frontend, .get_dig_mode = dcn10_get_dig_mode, - .is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode, + .is_in_alt_mode = dcn31_link_encoder_is_in_alt_mode, .get_max_link_cap = dcn20_link_encoder_get_max_link_cap, .set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux, }; @@ -404,3 +405,33 @@ void dcn31_link_encoder_disable_output( } } +bool dcn31_link_encoder_is_in_alt_mode(struct link_encoder *enc) +{ + struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc); + uint32_t dp_alt_mode_disable; + bool is_usb_c_alt_mode = false; + + if (enc->features.flags.bits.DP_IS_USB_C) { + if (enc->ctx->asic_id.hw_internal_rev != YELLOW_CARP_B0) { + // [Note] no need to check hw_internal_rev once phy mux selection is ready + REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable); + } else { + /* + * B0 phys use a new set of registers to check whether alt mode is disabled. + * if value == 1 alt mode is disabled, otherwise it is enabled. + */ + if ((enc10->base.transmitter == TRANSMITTER_UNIPHY_A) + || (enc10->base.transmitter == TRANSMITTER_UNIPHY_B) + || (enc10->base.transmitter == TRANSMITTER_UNIPHY_E)) { + REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable); + } else { + // [Note] need to change TRANSMITTER_UNIPHY_C/D to F/G once phy mux selection is ready + REG_GET(RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable); + } + } + + is_usb_c_alt_mode = (dp_alt_mode_disable == 0); + } + + return is_usb_c_alt_mode; +} diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h index 32d146312838..bec50e4402ff 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h @@ -69,6 +69,7 @@ SRI(RDPCSTX_PHY_CNTL4, RDPCSTX, id), \ SRI(RDPCSTX_PHY_CNTL5, RDPCSTX, id), \ SRI(RDPCSTX_PHY_CNTL6, RDPCSTX, id), \ + SRI(RDPCSPIPE_PHY_CNTL6, RDPCSPIPE, id), \ SRI(RDPCSTX_PHY_CNTL7, RDPCSTX, id), \ SRI(RDPCSTX_PHY_CNTL8, RDPCSTX, id), \ SRI(RDPCSTX_PHY_CNTL9, RDPCSTX, id), \ @@ -115,7 +116,9 @@ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_TX2_MPLL_EN, mask_sh),\ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_TX3_MPLL_EN, mask_sh),\ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, mask_sh),\ - LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, mask_sh),\ + LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, mask_sh),\ + LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, mask_sh),\ + LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE_ACK, mask_sh),\ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL7, RDPCS_PHY_DP_MPLLB_FRACN_QUOT, mask_sh),\ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL7, RDPCS_PHY_DP_MPLLB_FRACN_DEN, mask_sh),\ LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL8, RDPCS_PHY_DP_MPLLB_SSC_PEAK, mask_sh),\ @@ -243,4 +246,10 @@ void dcn31_link_encoder_disable_output( struct link_encoder *enc, enum signal_type signal); +/* + * Check whether USB-C DP Alt mode is disabled + */ +bool dcn31_link_encoder_is_in_alt_mode( + struct link_encoder *enc); + #endif /* __DC_LINK_ENCODER__DCN31_H__ */ diff --git a/drivers/gpu/drm/amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h index 92caf8441d1e..01a56556cde1 100644 --- a/drivers/gpu/drm/amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h +++ b/drivers/gpu/drm/amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h @@ -11932,5 +11932,32 @@ #define ixDPCSSYS_CR4_RAWLANEX_DIG_PCS_XF_RX_OVRD_OUT_2 0xe0c7 #define ixDPCSSYS_CR4_RAWLANEX_DIG_PCS_XF_TX_OVRD_IN_2 0xe0c8 +//RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6 +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4__SHIFT 0x10 +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE__SHIFT 0x11 +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK__SHIFT 0x12 +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4_MASK 0x00010000L +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_MASK 0x00020000L +#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK_MASK 0x00040000L + +//RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6 +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4__SHIFT 0x10 +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE__SHIFT 0x11 +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK__SHIFT 0x12 +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4_MASK 0x00010000L +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_MASK 0x00020000L +#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK_MASK 0x00040000L + +//[Note] Hack. RDPCSPIPE only has 2 instances. +#define regRDPCSPIPE0_RDPCSPIPE_PHY_CNTL6 0x2d73 +#define regRDPCSPIPE0_RDPCSPIPE_PHY_CNTL6_BASE_IDX 2 +#define regRDPCSPIPE1_RDPCSPIPE_PHY_CNTL6 0x2e4b +#define regRDPCSPIPE1_RDPCSPIPE_PHY_CNTL6_BASE_IDX 2 +#define regRDPCSPIPE2_RDPCSPIPE_PHY_CNTL6 0x2d73 +#define regRDPCSPIPE2_RDPCSPIPE_PHY_CNTL6_BASE_IDX 2 +#define regRDPCSPIPE3_RDPCSPIPE_PHY_CNTL6 0x2e4b +#define regRDPCSPIPE3_RDPCSPIPE_PHY_CNTL6_BASE_IDX 2 +#define regRDPCSPIPE4_RDPCSPIPE_PHY_CNTL6 0x2d73 +#define regRDPCSPIPE4_RDPCSPIPE_PHY_CNTL6_BASE_IDX 2 #endif -- cgit v1.2.3 From 2fe9a0e1173f4805669e7af34ea25af835274426 Mon Sep 17 00:00:00 2001 From: "Liu, Zhan" Date: Thu, 2 Sep 2021 15:08:29 -0400 Subject: drm/amd/display: Fix DCN3 B0 DP Alt Mapping [Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu Acked-by: Rodrigo Siqueira Signed-off-by: Zhan Liu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b) --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c index a7702d3c75cd..cb50e6eda47e 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c @@ -1284,6 +1284,12 @@ static struct stream_encoder *dcn31_stream_encoder_create( if (!enc1 || !vpg || !afmt) return NULL; + if (ctx->asic_id.chip_family == FAMILY_YELLOW_CARP && + ctx->asic_id.hw_internal_rev == YELLOW_CARP_B0) { + if ((eng_id == ENGINE_ID_DIGC) || (eng_id == ENGINE_ID_DIGD)) + eng_id = eng_id + 3; // For B0 only. C->F, D->G. + } + dcn30_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios, eng_id, vpg, afmt, &stream_enc_regs[eng_id], -- cgit v1.2.3 From 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Oct 2021 20:36:44 +0300 Subject: mei: me: add Ice Lake-N device id. Add Ice Lake-N device ID. The device can be found on MacBookPro16,2 [1]. [1]: https://linux-hardware.org/?probe=f1c5cf0c43 Signed-off-by: Andy Shevchenko Cc: stable Link: https://lore.kernel.org/r/20211001173644.16068-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 1 + drivers/misc/mei/pci-me.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index cb34925e10f1..67bb6a25fd0a 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -92,6 +92,7 @@ #define MEI_DEV_ID_CDF 0x18D3 /* Cedar Fork */ #define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */ +#define MEI_DEV_ID_ICP_N 0x38E0 /* Ice Lake Point N */ #define MEI_DEV_ID_JSP_N 0x4DE0 /* Jasper Lake Point N */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index c3393b383e59..3a45aaf002ac 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -96,6 +96,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_H, MEI_ME_PCH15_SPS_CFG)}, -- cgit v1.2.3 From 95dd8b2c1ed00c76aaf41b552041c90724749a53 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 5 Oct 2021 17:22:29 +0300 Subject: fs/ntfs3: Remove unnecessary functions We don't need ntfs_xattr_get_acl and ntfs_xattr_set_acl. There are ntfs_get_acl_ex and ntfs_set_acl_ex. Signed-off-by: Konstantin Komarov --- fs/ntfs3/xattr.c | 94 -------------------------------------------------------- 1 file changed, 94 deletions(-) diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index cdc01877227a..2143099cffdf 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -616,67 +616,6 @@ int ntfs_set_acl(struct user_namespace *mnt_userns, struct inode *inode, return ntfs_set_acl_ex(mnt_userns, inode, acl, type); } -static int ntfs_xattr_get_acl(struct user_namespace *mnt_userns, - struct inode *inode, int type, void *buffer, - size_t size) -{ - struct posix_acl *acl; - int err; - - if (!(inode->i_sb->s_flags & SB_POSIXACL)) { - ntfs_inode_warn(inode, "add mount option \"acl\" to use acl"); - return -EOPNOTSUPP; - } - - acl = ntfs_get_acl(inode, type); - if (IS_ERR(acl)) - return PTR_ERR(acl); - - if (!acl) - return -ENODATA; - - err = posix_acl_to_xattr(mnt_userns, acl, buffer, size); - posix_acl_release(acl); - - return err; -} - -static int ntfs_xattr_set_acl(struct user_namespace *mnt_userns, - struct inode *inode, int type, const void *value, - size_t size) -{ - struct posix_acl *acl; - int err; - - if (!(inode->i_sb->s_flags & SB_POSIXACL)) { - ntfs_inode_warn(inode, "add mount option \"acl\" to use acl"); - return -EOPNOTSUPP; - } - - if (!inode_owner_or_capable(mnt_userns, inode)) - return -EPERM; - - if (!value) { - acl = NULL; - } else { - acl = posix_acl_from_xattr(mnt_userns, value, size); - if (IS_ERR(acl)) - return PTR_ERR(acl); - - if (acl) { - err = posix_acl_valid(mnt_userns, acl); - if (err) - goto release_and_out; - } - } - - err = ntfs_set_acl(mnt_userns, inode, acl, type); - -release_and_out: - posix_acl_release(acl); - return err; -} - /* * ntfs_init_acl - Initialize the ACLs of a new inode. * @@ -843,23 +782,6 @@ static int ntfs_getxattr(const struct xattr_handler *handler, struct dentry *de, goto out; } -#ifdef CONFIG_NTFS3_FS_POSIX_ACL - if ((name_len == sizeof(XATTR_NAME_POSIX_ACL_ACCESS) - 1 && - !memcmp(name, XATTR_NAME_POSIX_ACL_ACCESS, - sizeof(XATTR_NAME_POSIX_ACL_ACCESS))) || - (name_len == sizeof(XATTR_NAME_POSIX_ACL_DEFAULT) - 1 && - !memcmp(name, XATTR_NAME_POSIX_ACL_DEFAULT, - sizeof(XATTR_NAME_POSIX_ACL_DEFAULT)))) { - /* TODO: init_user_ns? */ - err = ntfs_xattr_get_acl( - &init_user_ns, inode, - name_len == sizeof(XATTR_NAME_POSIX_ACL_ACCESS) - 1 - ? ACL_TYPE_ACCESS - : ACL_TYPE_DEFAULT, - buffer, size); - goto out; - } -#endif /* Deal with NTFS extended attribute. */ err = ntfs_get_ea(inode, name, name_len, buffer, size, NULL); @@ -972,22 +894,6 @@ set_new_fa: goto out; } -#ifdef CONFIG_NTFS3_FS_POSIX_ACL - if ((name_len == sizeof(XATTR_NAME_POSIX_ACL_ACCESS) - 1 && - !memcmp(name, XATTR_NAME_POSIX_ACL_ACCESS, - sizeof(XATTR_NAME_POSIX_ACL_ACCESS))) || - (name_len == sizeof(XATTR_NAME_POSIX_ACL_DEFAULT) - 1 && - !memcmp(name, XATTR_NAME_POSIX_ACL_DEFAULT, - sizeof(XATTR_NAME_POSIX_ACL_DEFAULT)))) { - err = ntfs_xattr_set_acl( - mnt_userns, inode, - name_len == sizeof(XATTR_NAME_POSIX_ACL_ACCESS) - 1 - ? ACL_TYPE_ACCESS - : ACL_TYPE_DEFAULT, - value, size); - goto out; - } -#endif /* Deal with NTFS extended attribute. */ err = ntfs_set_ea(inode, name, name_len, value, size, flags); -- cgit v1.2.3 From 7ab0965079bbc0e39fe0e1df4dcdf931c9d25372 Mon Sep 17 00:00:00 2001 From: Jude Shih Date: Mon, 4 Oct 2021 22:40:50 +0800 Subject: drm/amd/display: USB4 bring up set correct address [Why] YELLOW_CARP_B0 address was not correct [How] Set YELLOW_CARP_B0 to 0x1A. Reviewed-by: Nicholas Kazlauskas Acked-by: Wayne Lin Signed-off-by: Jude Shih Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/include/dal_asic_id.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/include/dal_asic_id.h b/drivers/gpu/drm/amd/display/include/dal_asic_id.h index 381c17caace1..5adc471bef57 100644 --- a/drivers/gpu/drm/amd/display/include/dal_asic_id.h +++ b/drivers/gpu/drm/amd/display/include/dal_asic_id.h @@ -227,7 +227,7 @@ enum { #define FAMILY_YELLOW_CARP 146 #define YELLOW_CARP_A0 0x01 -#define YELLOW_CARP_B0 0x02 // TODO: DCN31 - update with correct B0 ID +#define YELLOW_CARP_B0 0x1A #define YELLOW_CARP_UNKNOWN 0xFF #ifndef ASICREV_IS_YELLOW_CARP -- cgit v1.2.3 From b072ef1215aca33186e3a10109e872e528a9e516 Mon Sep 17 00:00:00 2001 From: Lang Yu Date: Wed, 29 Sep 2021 14:54:39 +0800 Subject: drm/amdkfd: fix a potential ttm->sg memory leak Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Lang Yu Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 2d6b2d77b738..054c1a224def 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -563,6 +563,7 @@ kfd_mem_dmaunmap_userptr(struct kgd_mem *mem, dma_unmap_sgtable(adev->dev, ttm->sg, direction, 0); sg_free_table(ttm->sg); + kfree(ttm->sg); ttm->sg = NULL; } -- cgit v1.2.3 From d08ce8c6d29f8cc7493b781be282604b10fc6e1e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 29 Sep 2021 13:42:08 -0400 Subject: Documentation/gpu: remove spurious "+" in amdgpu.rst MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Not sure why that was there. Remove it. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- Documentation/gpu/amdgpu.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst index 364680cdad2e..8ba72e898099 100644 --- a/Documentation/gpu/amdgpu.rst +++ b/Documentation/gpu/amdgpu.rst @@ -300,8 +300,8 @@ pcie_replay_count .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c :doc: pcie_replay_count -+GPU SmartShift Information -============================ +GPU SmartShift Information +========================== GPU SmartShift information via sysfs -- cgit v1.2.3 From 1d617c029fd9c960f8ba7a8d1a10699d820bd6b9 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Fri, 1 Oct 2021 16:49:07 +0800 Subject: drm/amdgpu: During s0ix don't wait to signal GFXOFF In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712 Signed-off-by: Lijo Lazar Reviewed-by: Alex Deucher Reviewed-by: Mario Limonciello Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c index e7f06bd0f0cd..1916ec84dd71 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c @@ -31,6 +31,8 @@ /* delay 0.1 second to enable gfx off feature */ #define GFX_OFF_DELAY_ENABLE msecs_to_jiffies(100) +#define GFX_OFF_NO_DELAY 0 + /* * GPU GFX IP block helpers function. */ @@ -558,6 +560,8 @@ int amdgpu_gfx_enable_kcq(struct amdgpu_device *adev) void amdgpu_gfx_off_ctrl(struct amdgpu_device *adev, bool enable) { + unsigned long delay = GFX_OFF_DELAY_ENABLE; + if (!(adev->pm.pp_feature & PP_GFXOFF_MASK)) return; @@ -573,8 +577,14 @@ void amdgpu_gfx_off_ctrl(struct amdgpu_device *adev, bool enable) adev->gfx.gfx_off_req_count--; - if (adev->gfx.gfx_off_req_count == 0 && !adev->gfx.gfx_off_state) - schedule_delayed_work(&adev->gfx.gfx_off_delay_work, GFX_OFF_DELAY_ENABLE); + if (adev->gfx.gfx_off_req_count == 0 && + !adev->gfx.gfx_off_state) { + /* If going to s2idle, no need to wait */ + if (adev->in_s0ix) + delay = GFX_OFF_NO_DELAY; + schedule_delayed_work(&adev->gfx.gfx_off_delay_work, + delay); + } } else { if (adev->gfx.gfx_off_req_count == 0) { cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work); -- cgit v1.2.3 From 4702b34d1de9582df9dfa0e583ea28fff7de29df Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 1 Oct 2021 15:40:00 -0400 Subject: drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/display/Kconfig b/drivers/gpu/drm/amd/display/Kconfig index 7dffc04a557e..127667e549c1 100644 --- a/drivers/gpu/drm/amd/display/Kconfig +++ b/drivers/gpu/drm/amd/display/Kconfig @@ -25,6 +25,8 @@ config DRM_AMD_DC_HDCP config DRM_AMD_DC_SI bool "AMD DC support for Southern Islands ASICs" + depends on DRM_AMDGPU_SI + depends on DRM_AMD_DC default n help Choose this option to enable new AMD DC support for SI asics -- cgit v1.2.3 From f729a592adb6760013c3e48622a5bf256b992452 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 29 Sep 2021 12:05:49 -0700 Subject: driver core: Reject pointless SYNC_STATE_ONLY device links SYNC_STATE_ONLY device links intentionally allow cycles because cyclic sync_state() dependencies are valid and necessary. However a SYNC_STATE_ONLY device link where the consumer and the supplier are the same device is pointless because the device link would be deleted as soon as the device probes (because it's also the consumer) and won't affect when the sync_state() callback is called. It's a waste of CPU cycles and memory to create this device link. So reject any attempts to create such a device link. Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag") Cc: stable Reported-by: Ulf Hansson Reviewed-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210929190549.860541-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 15986cc2fe5e..249da496581a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -687,7 +687,8 @@ struct device_link *device_link_add(struct device *consumer, { struct device_link *link; - if (!consumer || !supplier || flags & ~DL_ADD_VALID_FLAGS || + if (!consumer || !supplier || consumer == supplier || + flags & ~DL_ADD_VALID_FLAGS || (flags & DL_FLAG_STATELESS && flags & DL_MANAGED_LINK_FLAGS) || (flags & DL_FLAG_SYNC_STATE_ONLY && (flags & ~DL_FLAG_INFERRED) != DL_FLAG_SYNC_STATE_ONLY) || -- cgit v1.2.3 From 98e96cf80045a383fcc47c58dd4e87b3ae587b3e Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Tue, 28 Sep 2021 17:07:33 -0700 Subject: drivers: bus: simple-pm-bus: Add support for probing simple bus only devices fw_devlink could end up creating device links for bus only devices. However, bus only devices don't get probed and can block probe() or sync_state() [1] call backs of other devices. To avoid this, probe these devices using the simple-pm-bus driver. However, there are instances of devices that are not simple buses (they get probed by their specific drivers) that also list the "simple-bus" (or other bus only compatible strings) in their compatible property to automatically populate their child devices. We still want these devices to get probed by their specific drivers. So, we make sure this driver only probes devices that are only buses. [1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@mail.gmail.com/ Fixes: c442a0d18744 ("driver core: Set fw_devlink to "permissive" behavior by default") Cc: stable Cc: Rob Herring Tested-by: Saravana Kannan Tested-by: Ulf Hansson Tested-by: Geert Uytterhoeven Tested-by: Damien Le Moal Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210929000735.585237-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/bus/simple-pm-bus.c | 42 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c index 01a3d0cd08ed..6b8d6257ed8a 100644 --- a/drivers/bus/simple-pm-bus.c +++ b/drivers/bus/simple-pm-bus.c @@ -13,11 +13,36 @@ #include #include - static int simple_pm_bus_probe(struct platform_device *pdev) { - const struct of_dev_auxdata *lookup = dev_get_platdata(&pdev->dev); - struct device_node *np = pdev->dev.of_node; + const struct device *dev = &pdev->dev; + const struct of_dev_auxdata *lookup = dev_get_platdata(dev); + struct device_node *np = dev->of_node; + const struct of_device_id *match; + + /* + * Allow user to use driver_override to bind this driver to a + * transparent bus device which has a different compatible string + * that's not listed in simple_pm_bus_of_match. We don't want to do any + * of the simple-pm-bus tasks for these devices, so return early. + */ + if (pdev->driver_override) + return 0; + + match = of_match_device(dev->driver->of_match_table, dev); + /* + * These are transparent bus devices (not simple-pm-bus matches) that + * have their child nodes populated automatically. So, don't need to + * do anything more. We only match with the device if this driver is + * the most specific match because we don't want to incorrectly bind to + * a device that has a more specific driver. + */ + if (match && match->data) { + if (of_property_match_string(np, "compatible", match->compatible) == 0) + return 0; + else + return -ENODEV; + } dev_dbg(&pdev->dev, "%s\n", __func__); @@ -31,14 +56,25 @@ static int simple_pm_bus_probe(struct platform_device *pdev) static int simple_pm_bus_remove(struct platform_device *pdev) { + const void *data = of_device_get_match_data(&pdev->dev); + + if (pdev->driver_override || data) + return 0; + dev_dbg(&pdev->dev, "%s\n", __func__); pm_runtime_disable(&pdev->dev); return 0; } +#define ONLY_BUS ((void *) 1) /* Match if the device is only a bus. */ + static const struct of_device_id simple_pm_bus_of_match[] = { { .compatible = "simple-pm-bus", }, + { .compatible = "simple-bus", .data = ONLY_BUS }, + { .compatible = "simple-mfd", .data = ONLY_BUS }, + { .compatible = "isa", .data = ONLY_BUS }, + { .compatible = "arm,amba-bus", .data = ONLY_BUS }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match); -- cgit v1.2.3 From 81967efb5f3966e8692f9173c7fa2964034ece5d Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Tue, 28 Sep 2021 17:07:34 -0700 Subject: drivers: bus: Delete CONFIG_SIMPLE_PM_BUS The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work with fw_devlink. So, always compile it in for CONFIG_OF and delete the config since it's no longer necessary. Tested-by: Ulf Hansson Tested-by: Geert Uytterhoeven Tested-by: Damien Le Moal Cc: Rob Herring Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/configs/oxnas_v6_defconfig | 1 - arch/arm/configs/shmobile_defconfig | 1 - arch/arm/mach-omap2/Kconfig | 1 - arch/arm64/configs/defconfig | 1 - drivers/bus/Kconfig | 12 ------------ drivers/bus/Makefile | 2 +- drivers/soc/canaan/Kconfig | 1 - 8 files changed, 1 insertion(+), 19 deletions(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ba67c4717dcc..1f72c67438f9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -197,7 +197,6 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index cae0db6b4eaf..de37f7e90999 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index d9a27e4e0914..18d2a960b2d2 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR_HOST=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7f13adf26e61..02c253de9b6e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS select PM_GENERIC_DOMAINS select PM_GENERIC_DOMAINS_OF select RESET_CONTROLLER - select SIMPLE_PM_BUS select SOC_BUS select TI_SYSC select OMAP_IRQCHIP diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 156d96afbbfc..545197bc0501 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_HISILICON_LPC=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_FSL_MC_BUS=y CONFIG_TEGRA_ACONNECT=m CONFIG_GNSS=m diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index a5b96f3aad67..a4cf3d692dc3 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -152,18 +152,6 @@ config QCOM_EBI2 Interface 2, which can be used to connect things like NAND Flash, SRAM, ethernet adapters, FPGAs and LCD displays. -config SIMPLE_PM_BUS - tristate "Simple Power-Managed Bus Driver" - depends on OF && PM - help - Driver for transparent busses that don't need a real driver, but - where the bus controller is part of a PM domain, or under the control - of a functional clock, and thus relies on runtime PM for managing - this PM domain and/or clock. - An example of such a bus controller is the Renesas Bus State - Controller (BSC, sometimes called "LBSC within Bus Bridge", or - "External Bus Interface") as found on several Renesas ARM SoCs. - config SUN50I_DE2_BUS bool "Allwinner A64 DE2 Bus Driver" default ARM64 diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 1c29c5e8ffb8..52c2f35a26a9 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o -obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o +obj-$(CONFIG_OF) += simple-pm-bus.o obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig index 8179b69518b4..853096b7e84c 100644 --- a/drivers/soc/canaan/Kconfig +++ b/drivers/soc/canaan/Kconfig @@ -5,7 +5,6 @@ config SOC_K210_SYSCTL depends on RISCV && SOC_CANAAN && OF default SOC_CANAAN select PM - select SIMPLE_PM_BUS select SYSCON select MFD_SYSCON help -- cgit v1.2.3 From 0dd10a961f2aa39d02e9aa2194946713cb36d403 Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Fri, 24 Sep 2021 11:15:35 +0800 Subject: drm/amdkfd: remove redundant iommu cleanup code kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by: Yifan Zhang Reviewed-by: James Zhu Tested-by: James Zhu Acked-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index c2a4d920da40..4a416231b24c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -1085,18 +1085,12 @@ static int kfd_resume(struct kfd_dev *kfd) int err = 0; err = kfd->dqm->ops.start(kfd->dqm); - if (err) { + if (err) dev_err(kfd_device, "Error starting queue manager for device %x:%x\n", kfd->pdev->vendor, kfd->pdev->device); - goto dqm_start_error; - } return err; - -dqm_start_error: - kfd_iommu_suspend(kfd); - return err; } static inline void kfd_queue_work(struct workqueue_struct *wq, -- cgit v1.2.3 From 714d9e4574d54596973ee3b0624ee4a16264d700 Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Tue, 28 Sep 2021 15:42:35 +0800 Subject: drm/amdgpu: init iommu after amdkfd device init This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by: Yifan Zhang Reviewed-by: James Zhu Tested-by: James Zhu Acked-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index ab3794c42d36..53f3e07f6bd4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2394,10 +2394,6 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) if (r) goto init_failed; - r = amdgpu_amdkfd_resume_iommu(adev); - if (r) - goto init_failed; - r = amdgpu_device_ip_hw_init_phase1(adev); if (r) goto init_failed; @@ -2436,6 +2432,10 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) if (!adev->gmc.xgmi.pending_reset) amdgpu_amdkfd_device_init(adev); + r = amdgpu_amdkfd_resume_iommu(adev); + if (r) + goto init_failed; + amdgpu_fru_get_product_info(adev); init_failed: -- cgit v1.2.3 From 248b061689a40f4fed05252ee2c89f87cf26d7d8 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Fri, 1 Oct 2021 09:48:50 +0800 Subject: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f45e2 ("drm/amdgpu: Implement DPC recovery") Suggested-by: Andrey Grodzovsky Signed-off-by: Guchun Chen Reviewed-by: Andrey Grodzovsky Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index d356e329e6f8..269437b01328 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1087,6 +1087,7 @@ struct amdgpu_device { bool no_hw_access; struct pci_saved_state *pci_state; + pci_channel_state_t pci_channel_state; struct amdgpu_reset_control *reset_cntl; }; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 53f3e07f6bd4..af9bdf16eefd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -5399,6 +5399,8 @@ pci_ers_result_t amdgpu_pci_error_detected(struct pci_dev *pdev, pci_channel_sta return PCI_ERS_RESULT_DISCONNECT; } + adev->pci_channel_state = state; + switch (state) { case pci_channel_io_normal: return PCI_ERS_RESULT_CAN_RECOVER; @@ -5541,6 +5543,10 @@ void amdgpu_pci_resume(struct pci_dev *pdev) DRM_INFO("PCI error: resume callback!!\n"); + /* Only continue execution for the case of pci_channel_io_frozen */ + if (adev->pci_channel_state != pci_channel_io_frozen) + return; + for (i = 0; i < AMDGPU_MAX_RINGS; ++i) { struct amdgpu_ring *ring = adev->rings[i]; -- cgit v1.2.3 From b94729919db2c6737501c36ea6526a36d5d63fa2 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Tue, 28 Sep 2021 18:29:38 +0800 Subject: perf jevents: Free the sys_event_tables list after processing entries The compiler reports that free_sys_event_tables() is dead code. But according to the semantics, the "LIST_HEAD(sys_event_tables)" should also be released, just like we do with 'arch_std_events' in main(). Fixes: e9d32c1bf0cd7a98 ("perf vendor events: Add support for arch standard events") Signed-off-by: Like Xu Reviewed-by: John Garry Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210928102938.69681-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/pmu-events/jevents.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index 6731b3cf0c2f..7c887d37b893 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -1285,6 +1285,7 @@ int main(int argc, char *argv[]) } free_arch_std_events(); + free_sys_event_tables(); free(mapfile); return 0; @@ -1306,6 +1307,7 @@ err_close_eventsfp: create_empty_mapping(output_file); err_out: free_arch_std_events(); + free_sys_event_tables(); free(mapfile); return ret; } -- cgit v1.2.3 From 573cf5c9a152da1569b993600daa21ede30eeccb Mon Sep 17 00:00:00 2001 From: Branislav Rankov Date: Wed, 21 Jul 2021 11:32:58 +0100 Subject: perf build: Add missing -lstdc++ when linking with libopencsd Add -lstdc++ to perf when linking libopencsd as it is a dependency. It does not hurt to add it when dynamic linking. Signed-off-by: Branislav Rankov Acked-by: Jiri Olsa Cc: Ingo Molnar Cc: Mark Brown Cc: Peter Zijlstra Cc: coresight@lists.linaro.org Cc: nd@arm.com Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com Signed-off-by: Tamas Zsoldos [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index 446180401e26..14e3e8d702a0 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -143,7 +143,7 @@ FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto ifdef CSINCLUDES LIBOPENCSD_CFLAGS := -I$(CSINCLUDES) endif -OPENCSDLIBS := -lopencsd_c_api -lopencsd +OPENCSDLIBS := -lopencsd_c_api -lopencsd -lstdc++ ifdef CSLIBS LIBOPENCSD_LDFLAGS := -L$(CSLIBS) endif -- cgit v1.2.3 From 35c46bf545b31c961f216dd228bf9cba5499e5f0 Mon Sep 17 00:00:00 2001 From: Branislav Rankov Date: Wed, 21 Jul 2021 11:32:58 +0100 Subject: perf build: Fix plugin static linking with libopencsd on ARM and ARM64 Filter out -static flag when building plugins as they are always built as dynamic libraries and -static and -dynamic don't work well together on arm and arm64. Signed-off-by: Branislav Rankov Acked-by: Jiri Olsa Cc: Ingo Molnar Cc: Mark Brown Cc: Peter Zijlstra Cc: coresight@lists.linaro.org Cc: nd@arm.com Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com Signed-off-by: Tamas Zsoldos [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.perf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index e04313c4d840..5cd702062a04 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -802,7 +802,7 @@ endif $(patsubst perf-%,%.o,$(PROGRAMS)): $(wildcard */*.h) -LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS)' 'LDFLAGS=$(LDFLAGS)' +LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS)' 'LDFLAGS=$(filter-out -static,$(LDFLAGS))' $(LIBTRACEEVENT): FORCE $(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) $(OUTPUT)libtraceevent.a -- cgit v1.2.3 From 9fce636e5c7dd84873f096ae4d094fb6bd797f9f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 12 Feb 2020 11:04:23 -0300 Subject: tools include UAPI: Sync sound/asound.h copy with the kernel sources Picking the changes from: 09d23174402da0f1 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION") Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Jaroslav Kysela Cc: Takashi Iwai Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/sound/asound.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/include/uapi/sound/asound.h b/tools/include/uapi/sound/asound.h index 1d84ec9db93b..5859ca0a1439 100644 --- a/tools/include/uapi/sound/asound.h +++ b/tools/include/uapi/sound/asound.h @@ -784,6 +784,7 @@ struct snd_rawmidi_status { #define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int) #define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info) +#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int) #define SNDRV_RAWMIDI_IOCTL_PARAMS _IOWR('W', 0x10, struct snd_rawmidi_params) #define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status) #define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int) -- cgit v1.2.3 From 0b6c5371c03c2b17963e1abd7ed0e3f1f950cba9 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Thu, 30 Sep 2021 12:52:46 -0700 Subject: perf tests attr: Add missing topdown metrics events The Topdown metrics events were added as 'perf stat' default events since commit 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events"). However, the perf attr tests were not updated accordingly. The perf attr test fails on the platform which supports Topdown metrics. # perf test 17 17: Setup struct perf_event_attr :FAILED! Add Topdown metrics events into perf attr test cases. Make them optional since they are only available on newer platforms. Fixes: 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events") Reported-by: kernel test robot Signed-off-by: Kan Liang Cc: Andi Kleen Cc: Jiri Olsa Link: http://lore.kernel.org/lkml/1633031566-176517-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/attr/test-stat-default | 97 +++++++++++++++++++ tools/perf/tests/attr/test-stat-detailed-1 | 113 ++++++++++++++++++++-- tools/perf/tests/attr/test-stat-detailed-2 | 137 +++++++++++++++++++++++---- tools/perf/tests/attr/test-stat-detailed-3 | 145 ++++++++++++++++++++++++----- 4 files changed, 440 insertions(+), 52 deletions(-) diff --git a/tools/perf/tests/attr/test-stat-default b/tools/perf/tests/attr/test-stat-default index d9e99b3f77e6..d8ea6a88163f 100644 --- a/tools/perf/tests/attr/test-stat-default +++ b/tools/perf/tests/attr/test-stat-default @@ -68,3 +68,100 @@ fd=10 type=0 config=5 optional=1 + +# PERF_TYPE_RAW / slots (0x400) +[event11:base-stat] +fd=11 +group_fd=-1 +type=4 +config=1024 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-retiring (0x8000) +[event12:base-stat] +fd=12 +group_fd=11 +type=4 +config=32768 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-bad-spec (0x8100) +[event13:base-stat] +fd=13 +group_fd=11 +type=4 +config=33024 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fe-bound (0x8200) +[event14:base-stat] +fd=14 +group_fd=11 +type=4 +config=33280 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-be-bound (0x8300) +[event15:base-stat] +fd=15 +group_fd=11 +type=4 +config=33536 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-heavy-ops (0x8400) +[event16:base-stat] +fd=16 +group_fd=11 +type=4 +config=33792 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-br-mispredict (0x8500) +[event17:base-stat] +fd=17 +group_fd=11 +type=4 +config=34048 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fetch-lat (0x8600) +[event18:base-stat] +fd=18 +group_fd=11 +type=4 +config=34304 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-mem-bound (0x8700) +[event19:base-stat] +fd=19 +group_fd=11 +type=4 +config=34560 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 diff --git a/tools/perf/tests/attr/test-stat-detailed-1 b/tools/perf/tests/attr/test-stat-detailed-1 index 8b04a055d154..b656ab93c5bf 100644 --- a/tools/perf/tests/attr/test-stat-detailed-1 +++ b/tools/perf/tests/attr/test-stat-detailed-1 @@ -70,12 +70,109 @@ type=0 config=5 optional=1 +# PERF_TYPE_RAW / slots (0x400) +[event11:base-stat] +fd=11 +group_fd=-1 +type=4 +config=1024 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-retiring (0x8000) +[event12:base-stat] +fd=12 +group_fd=11 +type=4 +config=32768 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-bad-spec (0x8100) +[event13:base-stat] +fd=13 +group_fd=11 +type=4 +config=33024 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fe-bound (0x8200) +[event14:base-stat] +fd=14 +group_fd=11 +type=4 +config=33280 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-be-bound (0x8300) +[event15:base-stat] +fd=15 +group_fd=11 +type=4 +config=33536 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-heavy-ops (0x8400) +[event16:base-stat] +fd=16 +group_fd=11 +type=4 +config=33792 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-br-mispredict (0x8500) +[event17:base-stat] +fd=17 +group_fd=11 +type=4 +config=34048 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fetch-lat (0x8600) +[event18:base-stat] +fd=18 +group_fd=11 +type=4 +config=34304 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-mem-bound (0x8700) +[event19:base-stat] +fd=19 +group_fd=11 +type=4 +config=34560 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + # PERF_TYPE_HW_CACHE / # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event11:base-stat] -fd=11 +[event20:base-stat] +fd=20 type=3 config=0 optional=1 @@ -84,8 +181,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event12:base-stat] -fd=12 +[event21:base-stat] +fd=21 type=3 config=65536 optional=1 @@ -94,8 +191,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event13:base-stat] -fd=13 +[event22:base-stat] +fd=22 type=3 config=2 optional=1 @@ -104,8 +201,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event14:base-stat] -fd=14 +[event23:base-stat] +fd=23 type=3 config=65538 optional=1 diff --git a/tools/perf/tests/attr/test-stat-detailed-2 b/tools/perf/tests/attr/test-stat-detailed-2 index 4fca9f1bfbf8..97625090a1c4 100644 --- a/tools/perf/tests/attr/test-stat-detailed-2 +++ b/tools/perf/tests/attr/test-stat-detailed-2 @@ -70,12 +70,109 @@ type=0 config=5 optional=1 +# PERF_TYPE_RAW / slots (0x400) +[event11:base-stat] +fd=11 +group_fd=-1 +type=4 +config=1024 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-retiring (0x8000) +[event12:base-stat] +fd=12 +group_fd=11 +type=4 +config=32768 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-bad-spec (0x8100) +[event13:base-stat] +fd=13 +group_fd=11 +type=4 +config=33024 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fe-bound (0x8200) +[event14:base-stat] +fd=14 +group_fd=11 +type=4 +config=33280 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-be-bound (0x8300) +[event15:base-stat] +fd=15 +group_fd=11 +type=4 +config=33536 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-heavy-ops (0x8400) +[event16:base-stat] +fd=16 +group_fd=11 +type=4 +config=33792 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-br-mispredict (0x8500) +[event17:base-stat] +fd=17 +group_fd=11 +type=4 +config=34048 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fetch-lat (0x8600) +[event18:base-stat] +fd=18 +group_fd=11 +type=4 +config=34304 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-mem-bound (0x8700) +[event19:base-stat] +fd=19 +group_fd=11 +type=4 +config=34560 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + # PERF_TYPE_HW_CACHE / # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event11:base-stat] -fd=11 +[event20:base-stat] +fd=20 type=3 config=0 optional=1 @@ -84,8 +181,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event12:base-stat] -fd=12 +[event21:base-stat] +fd=21 type=3 config=65536 optional=1 @@ -94,8 +191,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event13:base-stat] -fd=13 +[event22:base-stat] +fd=22 type=3 config=2 optional=1 @@ -104,8 +201,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event14:base-stat] -fd=14 +[event23:base-stat] +fd=23 type=3 config=65538 optional=1 @@ -114,8 +211,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1I << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event15:base-stat] -fd=15 +[event24:base-stat] +fd=24 type=3 config=1 optional=1 @@ -124,8 +221,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1I << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event16:base-stat] -fd=16 +[event25:base-stat] +fd=25 type=3 config=65537 optional=1 @@ -134,8 +231,8 @@ optional=1 # PERF_COUNT_HW_CACHE_DTLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event17:base-stat] -fd=17 +[event26:base-stat] +fd=26 type=3 config=3 optional=1 @@ -144,8 +241,8 @@ optional=1 # PERF_COUNT_HW_CACHE_DTLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event18:base-stat] -fd=18 +[event27:base-stat] +fd=27 type=3 config=65539 optional=1 @@ -154,8 +251,8 @@ optional=1 # PERF_COUNT_HW_CACHE_ITLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event19:base-stat] -fd=19 +[event28:base-stat] +fd=28 type=3 config=4 optional=1 @@ -164,8 +261,8 @@ optional=1 # PERF_COUNT_HW_CACHE_ITLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event20:base-stat] -fd=20 +[event29:base-stat] +fd=29 type=3 config=65540 optional=1 diff --git a/tools/perf/tests/attr/test-stat-detailed-3 b/tools/perf/tests/attr/test-stat-detailed-3 index 4bb58e1c82a6..d555042e3fbf 100644 --- a/tools/perf/tests/attr/test-stat-detailed-3 +++ b/tools/perf/tests/attr/test-stat-detailed-3 @@ -70,12 +70,109 @@ type=0 config=5 optional=1 +# PERF_TYPE_RAW / slots (0x400) +[event11:base-stat] +fd=11 +group_fd=-1 +type=4 +config=1024 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-retiring (0x8000) +[event12:base-stat] +fd=12 +group_fd=11 +type=4 +config=32768 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-bad-spec (0x8100) +[event13:base-stat] +fd=13 +group_fd=11 +type=4 +config=33024 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fe-bound (0x8200) +[event14:base-stat] +fd=14 +group_fd=11 +type=4 +config=33280 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-be-bound (0x8300) +[event15:base-stat] +fd=15 +group_fd=11 +type=4 +config=33536 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-heavy-ops (0x8400) +[event16:base-stat] +fd=16 +group_fd=11 +type=4 +config=33792 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-br-mispredict (0x8500) +[event17:base-stat] +fd=17 +group_fd=11 +type=4 +config=34048 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-fetch-lat (0x8600) +[event18:base-stat] +fd=18 +group_fd=11 +type=4 +config=34304 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + +# PERF_TYPE_RAW / topdown-mem-bound (0x8700) +[event19:base-stat] +fd=19 +group_fd=11 +type=4 +config=34560 +disabled=0 +enable_on_exec=0 +read_format=15 +optional=1 + # PERF_TYPE_HW_CACHE / # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event11:base-stat] -fd=11 +[event20:base-stat] +fd=20 type=3 config=0 optional=1 @@ -84,8 +181,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event12:base-stat] -fd=12 +[event21:base-stat] +fd=21 type=3 config=65536 optional=1 @@ -94,8 +191,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event13:base-stat] -fd=13 +[event22:base-stat] +fd=22 type=3 config=2 optional=1 @@ -104,8 +201,8 @@ optional=1 # PERF_COUNT_HW_CACHE_LL << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event14:base-stat] -fd=14 +[event23:base-stat] +fd=23 type=3 config=65538 optional=1 @@ -114,8 +211,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1I << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event15:base-stat] -fd=15 +[event24:base-stat] +fd=24 type=3 config=1 optional=1 @@ -124,8 +221,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1I << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event16:base-stat] -fd=16 +[event25:base-stat] +fd=25 type=3 config=65537 optional=1 @@ -134,8 +231,8 @@ optional=1 # PERF_COUNT_HW_CACHE_DTLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event17:base-stat] -fd=17 +[event26:base-stat] +fd=26 type=3 config=3 optional=1 @@ -144,8 +241,8 @@ optional=1 # PERF_COUNT_HW_CACHE_DTLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event18:base-stat] -fd=18 +[event27:base-stat] +fd=27 type=3 config=65539 optional=1 @@ -154,8 +251,8 @@ optional=1 # PERF_COUNT_HW_CACHE_ITLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event19:base-stat] -fd=19 +[event28:base-stat] +fd=28 type=3 config=4 optional=1 @@ -164,8 +261,8 @@ optional=1 # PERF_COUNT_HW_CACHE_ITLB << 0 | # (PERF_COUNT_HW_CACHE_OP_READ << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event20:base-stat] -fd=20 +[event29:base-stat] +fd=29 type=3 config=65540 optional=1 @@ -174,8 +271,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | # (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) -[event21:base-stat] -fd=21 +[event30:base-stat] +fd=30 type=3 config=512 optional=1 @@ -184,8 +281,8 @@ optional=1 # PERF_COUNT_HW_CACHE_L1D << 0 | # (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | # (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) -[event22:base-stat] -fd=22 +[event31:base-stat] +fd=31 type=3 config=66048 optional=1 -- cgit v1.2.3 From 4d8b35968bbf9e42b6b202eedb510e2c82ad8b38 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 4 Oct 2021 10:07:50 -0700 Subject: objtool: Remove reloc symbol type checks in get_alt_entry() Converting a special section's relocation reference to a symbol is straightforward. No need for objtool to complain that it doesn't know how to handle it. Just handle it. This fixes the following warning: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Reported-by: Linus Torvalds Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com Cc: Peter Zijlstra Cc: x86@kernel.org Cc: Miroslav Benes Cc: linux-kernel@vger.kernel.org --- tools/objtool/special.c | 36 +++++++----------------------------- 1 file changed, 7 insertions(+), 29 deletions(-) diff --git a/tools/objtool/special.c b/tools/objtool/special.c index f1428e32a505..83d5f969bcb0 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -58,22 +58,11 @@ void __weak arch_handle_alternative(unsigned short feature, struct special_alt * { } -static bool reloc2sec_off(struct reloc *reloc, struct section **sec, unsigned long *off) +static void reloc_to_sec_off(struct reloc *reloc, struct section **sec, + unsigned long *off) { - switch (reloc->sym->type) { - case STT_FUNC: - *sec = reloc->sym->sec; - *off = reloc->sym->offset + reloc->addend; - return true; - - case STT_SECTION: - *sec = reloc->sym->sec; - *off = reloc->addend; - return true; - - default: - return false; - } + *sec = reloc->sym->sec; + *off = reloc->sym->offset + reloc->addend; } static int get_alt_entry(struct elf *elf, struct special_entry *entry, @@ -109,13 +98,8 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, WARN_FUNC("can't find orig reloc", sec, offset + entry->orig); return -1; } - if (!reloc2sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off)) { - WARN_FUNC("don't know how to handle reloc symbol type %d: %s", - sec, offset + entry->orig, - orig_reloc->sym->type, - orig_reloc->sym->name); - return -1; - } + + reloc_to_sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off); if (!entry->group || alt->new_len) { new_reloc = find_reloc_by_dest(elf, sec, offset + entry->new); @@ -133,13 +117,7 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, if (arch_is_retpoline(new_reloc->sym)) return 1; - if (!reloc2sec_off(new_reloc, &alt->new_sec, &alt->new_off)) { - WARN_FUNC("don't know how to handle reloc symbol type %d: %s", - sec, offset + entry->new, - new_reloc->sym->type, - new_reloc->sym->name); - return -1; - } + reloc_to_sec_off(new_reloc, &alt->new_sec, &alt->new_off); /* _ASM_EXTABLE_EX hack */ if (alt->new_off >= 0x7ffffff0) -- cgit v1.2.3 From dc02368164bd0ec603e3f5b3dd8252744a667b8a Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Sun, 22 Aug 2021 18:50:36 -0400 Subject: objtool: Make .altinstructions section entry size consistent Commit e31694e0a7a7 ("objtool: Don't make .altinstructions writable") aligned objtool-created and kernel-created .altinstructions section flags, but there remains a minor discrepency in their use of a section entry size: objtool sets one while the kernel build does not. While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small deviation can cause failures with external tooling (kpatch-build). Fix this by creating new .altinstructions sections with sh_entsize of 0 and then later updating sec->sh_size as alternatives are added to the section. An added benefit is avoiding the data descriptor and buffer created by elf_create_section(), but previously unused by elf_add_alternative(). Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Signed-off-by: Joe Lawrence Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com Cc: Andy Lavr Cc: Peter Zijlstra Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org --- tools/objtool/arch/x86/decode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c index bc821056aba9..0893436cc09f 100644 --- a/tools/objtool/arch/x86/decode.c +++ b/tools/objtool/arch/x86/decode.c @@ -684,7 +684,7 @@ static int elf_add_alternative(struct elf *elf, sec = find_section_by_name(elf, ".altinstructions"); if (!sec) { sec = elf_create_section(elf, ".altinstructions", - SHF_ALLOC, size, 0); + SHF_ALLOC, 0, 0); if (!sec) { WARN_ELF("elf_create_section"); -- cgit v1.2.3 From fe255fe6ad97685e5a4be0d871f43288dbc10ad6 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Sun, 22 Aug 2021 18:50:37 -0400 Subject: objtool: Remove redundant 'len' field from struct section The section structure already contains sh_size, so just remove the extra 'len' member that requires extra mirroring and potential confusion. Suggested-by: Josh Poimboeuf Signed-off-by: Joe Lawrence Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20210822225037.54620-3-joe.lawrence@redhat.com Cc: Andy Lavr Cc: Peter Zijlstra Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org --- tools/objtool/check.c | 16 ++++++++-------- tools/objtool/elf.c | 14 ++++++-------- tools/objtool/include/objtool/elf.h | 1 - tools/objtool/orc_gen.c | 2 +- tools/objtool/special.c | 4 ++-- 5 files changed, 17 insertions(+), 20 deletions(-) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index e5947fbb9e7a..06b5c164ae93 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -292,7 +292,7 @@ static int decode_instructions(struct objtool_file *file) !strcmp(sec->name, ".entry.text")) sec->noinstr = true; - for (offset = 0; offset < sec->len; offset += insn->len) { + for (offset = 0; offset < sec->sh.sh_size; offset += insn->len) { insn = malloc(sizeof(*insn)); if (!insn) { WARN("malloc failed"); @@ -307,7 +307,7 @@ static int decode_instructions(struct objtool_file *file) insn->offset = offset; ret = arch_decode_instruction(file->elf, sec, offset, - sec->len - offset, + sec->sh.sh_size - offset, &insn->len, &insn->type, &insn->immediate, &insn->stack_ops); @@ -349,9 +349,9 @@ static struct instruction *find_last_insn(struct objtool_file *file, { struct instruction *insn = NULL; unsigned int offset; - unsigned int end = (sec->len > 10) ? sec->len - 10 : 0; + unsigned int end = (sec->sh.sh_size > 10) ? sec->sh.sh_size - 10 : 0; - for (offset = sec->len - 1; offset >= end && !insn; offset--) + for (offset = sec->sh.sh_size - 1; offset >= end && !insn; offset--) insn = find_insn(file, sec, offset); return insn; @@ -389,7 +389,7 @@ static int add_dead_ends(struct objtool_file *file) insn = find_insn(file, reloc->sym->sec, reloc->addend); if (insn) insn = list_prev_entry(insn, list); - else if (reloc->addend == reloc->sym->sec->len) { + else if (reloc->addend == reloc->sym->sec->sh.sh_size) { insn = find_last_insn(file, reloc->sym->sec); if (!insn) { WARN("can't find unreachable insn at %s+0x%x", @@ -424,7 +424,7 @@ reachable: insn = find_insn(file, reloc->sym->sec, reloc->addend); if (insn) insn = list_prev_entry(insn, list); - else if (reloc->addend == reloc->sym->sec->len) { + else if (reloc->addend == reloc->sym->sec->sh.sh_size) { insn = find_last_insn(file, reloc->sym->sec); if (!insn) { WARN("can't find reachable insn at %s+0x%x", @@ -1561,14 +1561,14 @@ static int read_unwind_hints(struct objtool_file *file) return -1; } - if (sec->len % sizeof(struct unwind_hint)) { + if (sec->sh.sh_size % sizeof(struct unwind_hint)) { WARN("struct unwind_hint size mismatch"); return -1; } file->hints = true; - for (i = 0; i < sec->len / sizeof(struct unwind_hint); i++) { + for (i = 0; i < sec->sh.sh_size / sizeof(struct unwind_hint); i++) { hint = (struct unwind_hint *)sec->data->d_buf + i; reloc = find_reloc_by_dest(file->elf, sec, i * sizeof(*hint)); diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 8676c7598728..b18f0055b50b 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -286,10 +286,9 @@ static int read_sections(struct elf *elf) return -1; } } - sec->len = sec->sh.sh_size; if (sec->sh.sh_flags & SHF_EXECINSTR) - elf->text_size += sec->len; + elf->text_size += sec->sh.sh_size; list_add_tail(&sec->list, &elf->sections); elf_hash_add(section, &sec->hash, sec->idx); @@ -734,8 +733,8 @@ static int elf_add_string(struct elf *elf, struct section *strtab, char *str) data->d_size = strlen(str) + 1; data->d_align = 1; - len = strtab->len; - strtab->len += data->d_size; + len = strtab->sh.sh_size; + strtab->sh.sh_size += data->d_size; strtab->changed = true; return len; @@ -790,9 +789,9 @@ struct symbol *elf_create_undef_symbol(struct elf *elf, const char *name) data->d_align = 1; data->d_type = ELF_T_SYM; - sym->idx = symtab->len / sizeof(sym->sym); + sym->idx = symtab->sh.sh_size / sizeof(sym->sym); - symtab->len += data->d_size; + symtab->sh.sh_size += data->d_size; symtab->changed = true; symtab_shndx = find_section_by_name(elf, ".symtab_shndx"); @@ -814,7 +813,7 @@ struct symbol *elf_create_undef_symbol(struct elf *elf, const char *name) data->d_align = 4; data->d_type = ELF_T_WORD; - symtab_shndx->len += 4; + symtab_shndx->sh.sh_size += 4; symtab_shndx->changed = true; } @@ -855,7 +854,6 @@ struct section *elf_create_section(struct elf *elf, const char *name, } sec->idx = elf_ndxscn(s); - sec->len = size; sec->changed = true; sec->data = elf_newdata(s); diff --git a/tools/objtool/include/objtool/elf.h b/tools/objtool/include/objtool/elf.h index e34395047530..075d8291b854 100644 --- a/tools/objtool/include/objtool/elf.h +++ b/tools/objtool/include/objtool/elf.h @@ -38,7 +38,6 @@ struct section { Elf_Data *data; char *name; int idx; - unsigned int len; bool changed, text, rodata, noinstr; }; diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c index dc9b7dd314b0..b5865e2450cb 100644 --- a/tools/objtool/orc_gen.c +++ b/tools/objtool/orc_gen.c @@ -204,7 +204,7 @@ int orc_create(struct objtool_file *file) /* Add a section terminator */ if (!empty) { - orc_list_add(&orc_list, &null, sec, sec->len); + orc_list_add(&orc_list, &null, sec, sec->sh.sh_size); nr++; } } diff --git a/tools/objtool/special.c b/tools/objtool/special.c index 83d5f969bcb0..06c3eacab3d5 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -159,13 +159,13 @@ int special_get_alts(struct elf *elf, struct list_head *alts) if (!sec) continue; - if (sec->len % entry->size != 0) { + if (sec->sh.sh_size % entry->size != 0) { WARN("%s size not a multiple of %d", sec->name, entry->size); return -1; } - nr_entries = sec->len / entry->size; + nr_entries = sec->sh.sh_size / entry->size; for (idx = 0; idx < nr_entries; idx++) { alt = malloc(sizeof(*alt)); -- cgit v1.2.3 From f3d7c2cdf6dc0d5402ec29c3673893b3542c5ad1 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Tue, 5 Oct 2021 11:36:01 -0700 Subject: xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not selected but CONFIG_OF is. Signed-off-by: Max Filippov --- arch/xtensa/platforms/xtfpga/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 4f7d6142d41f..59b7f11f2a3e 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -66,7 +66,7 @@ void __init platform_calibrate_ccount(void) #endif -#ifdef CONFIG_OF +#ifdef CONFIG_USE_OF static void __init xtfpga_clk_setup(struct device_node *np) { @@ -284,4 +284,4 @@ static int __init xtavnet_init(void) */ arch_initcall(xtavnet_init); -#endif /* CONFIG_OF */ +#endif /* CONFIG_USE_OF */ -- cgit v1.2.3 From 012e974501a270d8dfd4ee2039e1fdf7579c907e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 1 Aug 2021 10:36:59 -0700 Subject: xtensa: xtfpga: Try software restart before simulating CPU reset Rebooting xtensa images loaded with the '-kernel' option in qemu does not work. When executing a reboot command, the qemu session either hangs or experiences an endless sequence of error messages. Kernel panic - not syncing: Unrecoverable error in exception handler Reset code jumps to the CPU restart address, but Linux can not recover from there because code and data in the kernel init sections have been discarded and overwritten at this point. XTFPGA platforms have a means to reset the CPU by writing 0xdead into a specific FPGA IO address. When used in QEMU the kernel image loaded with the '-kernel' option gets restored to its original state allowing the machine to boot successfully. Use that mechanism to attempt a platform reset. If it does not work, fall back to the existing mechanism. Signed-off-by: Guenter Roeck Signed-off-by: Max Filippov --- arch/xtensa/platforms/xtfpga/setup.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 59b7f11f2a3e..538e6748e85a 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -51,8 +51,12 @@ void platform_power_off(void) void platform_restart(void) { - /* Flush and reset the mmu, simulate a processor reset, and - * jump to the reset vector. */ + /* Try software reset first. */ + WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead); + + /* If software reset did not work, flush and reset the mmu, + * simulate a processor reset, and jump to the reset vector. + */ cpu_reset(); /* control never gets here */ } -- cgit v1.2.3 From b13a270ace2e4c70653aa1d1d0394c553905802f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 8 Sep 2021 08:49:36 +0300 Subject: bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in addition to dcan2 for errata i893 handling. Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods" dts property is used with related dcan hwmod data. This should be only needed if anybody needs to git bisect earlier stable trees though. Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 ++ drivers/bus/ti-sysc.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 12b26e04686f..0c2936c7a379 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3614,6 +3614,8 @@ int omap_hwmod_init_module(struct device *dev, oh->flags |= HWMOD_SWSUP_SIDLE_ACT; if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY) oh->flags |= HWMOD_SWSUP_MSTANDBY; + if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO) + oh->flags |= HWMOD_CLKDM_NOAUTO; error = omap_hwmod_check_module(dev, oh, data, sysc_fields, rev_offs, sysc_offs, syss_offs, diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 484bfe5fdcac..6a8b7fb5be58 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1464,6 +1464,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* Quirks that need to be set based on detected module */ SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff, SYSC_MODULE_QUIRK_AESS), + /* Errata i893 handling for dra7 dcan1 and 2 */ + SYSC_QUIRK("dcan", 0x4ae3c000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, + SYSC_QUIRK_CLKDM_NOAUTO), SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff, SYSC_QUIRK_CLKDM_NOAUTO), SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, -- cgit v1.2.3 From 80d680fdccba214e8106dc1aa33de5207ad75394 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 2 Sep 2021 12:58:28 +0300 Subject: ARM: dts: omap3430-sdp: Fix NAND device node Nand is on CS1 so reg properties first field should be 1 not 0. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index c5b903718414..7d530ae3483b 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -101,7 +101,7 @@ nand@1,0 { compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ -- cgit v1.2.3 From 363999901116ffa9a5462215fef25ea9c7f2823c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 24 Sep 2021 09:17:30 +0900 Subject: ksmbd: add the check to vaildate if stream protocol length exceeds maximum value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch add MAX_STREAM_PROT_LEN macro and check if stream protocol length exceeds maximum value. opencode pdu size check in ksmbd_pdu_size_has_room(). Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/connection.c | 10 ++++++---- fs/ksmbd/smb_common.c | 6 ------ fs/ksmbd/smb_common.h | 4 ++-- 3 files changed, 8 insertions(+), 12 deletions(-) diff --git a/fs/ksmbd/connection.c b/fs/ksmbd/connection.c index af086d35398a..48b18b4ec117 100644 --- a/fs/ksmbd/connection.c +++ b/fs/ksmbd/connection.c @@ -296,10 +296,12 @@ int ksmbd_conn_handler_loop(void *p) pdu_size = get_rfc1002_len(hdr_buf); ksmbd_debug(CONN, "RFC1002 header %u bytes\n", pdu_size); - /* make sure we have enough to get to SMB header end */ - if (!ksmbd_pdu_size_has_room(pdu_size)) { - ksmbd_debug(CONN, "SMB request too short (%u bytes)\n", - pdu_size); + /* + * Check if pdu size is valid (min : smb header size, + * max : 0x00FFFFFF). + */ + if (pdu_size < __SMB2_HEADER_STRUCTURE_SIZE || + pdu_size > MAX_STREAM_PROT_LEN) { continue; } diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index db8042a173d0..b6c4c7e960fa 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -21,7 +21,6 @@ static const char basechars[43] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_-!@#$%"; #define MAGIC_CHAR '~' #define PERIOD '.' #define mangle(V) ((char)(basechars[(V) % MANGLE_BASE])) -#define KSMBD_MIN_SUPPORTED_HEADER_SIZE (sizeof(struct smb2_hdr)) struct smb_protocol { int index; @@ -294,11 +293,6 @@ int ksmbd_init_smb_server(struct ksmbd_work *work) return 0; } -bool ksmbd_pdu_size_has_room(unsigned int pdu) -{ - return (pdu >= KSMBD_MIN_SUPPORTED_HEADER_SIZE - 4); -} - int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level, struct ksmbd_file *dir, struct ksmbd_dir_info *d_info, diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h index 994abede27e9..6e79e7577f6b 100644 --- a/fs/ksmbd/smb_common.h +++ b/fs/ksmbd/smb_common.h @@ -48,6 +48,8 @@ #define CIFS_DEFAULT_IOSIZE (64 * 1024) #define MAX_CIFS_SMALL_BUFFER_SIZE 448 /* big enough for most */ +#define MAX_STREAM_PROT_LEN 0x00FFFFFF + /* Responses when opening a file. */ #define F_SUPERSEDED 0 #define F_OPENED 1 @@ -493,8 +495,6 @@ int ksmbd_lookup_dialect_by_id(__le16 *cli_dialects, __le16 dialects_count); int ksmbd_init_smb_server(struct ksmbd_work *work); -bool ksmbd_pdu_size_has_room(unsigned int pdu); - struct ksmbd_kstat; int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level, -- cgit v1.2.3 From 319933a80fd4f07122466a77f93e5019d71be74c Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 5 Oct 2021 15:34:33 +0200 Subject: xen/balloon: fix cancelled balloon action MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case a ballooning action is cancelled the new kernel thread handling the ballooning might end up in a busy loop. Fix that by handling the cancelled action gracefully. While at it introduce a short wait for the BP_WAIT case. Cc: stable@vger.kernel.org Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Juergen Gross Tested-by: Jason Andryuk Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20211005133433.32008-1-jgross@suse.com Signed-off-by: Juergen Gross --- drivers/xen/balloon.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 43ebfe36ac27..3a50f097ed3e 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -491,12 +491,12 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) } /* - * Stop waiting if either state is not BP_EAGAIN and ballooning action is - * needed, or if the credit has changed while state is BP_EAGAIN. + * Stop waiting if either state is BP_DONE and ballooning action is + * needed, or if the credit has changed while state is not BP_DONE. */ static bool balloon_thread_cond(enum bp_state state, long credit) { - if (state != BP_EAGAIN) + if (state == BP_DONE) credit = 0; return current_credit() != credit || kthread_should_stop(); @@ -516,10 +516,19 @@ static int balloon_thread(void *unused) set_freezable(); for (;;) { - if (state == BP_EAGAIN) - timeout = balloon_stats.schedule_delay * HZ; - else + switch (state) { + case BP_DONE: + case BP_ECANCELED: timeout = 3600 * HZ; + break; + case BP_EAGAIN: + timeout = balloon_stats.schedule_delay * HZ; + break; + case BP_WAIT: + timeout = HZ; + break; + } + credit = current_credit(); wait_event_freezable_timeout(balloon_thread_wq, -- cgit v1.2.3 From 9287e91e9019d4bc1018adb55ab791ae672e0b14 Mon Sep 17 00:00:00 2001 From: Mateusz Kwiatkowski Date: Thu, 22 Jul 2021 21:02:08 +0200 Subject: ARM: dts: bcm283x: Fix VEC address for BCM2711 The VEC has a different address (0x7ec13000) on the BCM2711 (used in e.g. Raspberry Pi 4) compared to BCM283x (e.g. Pi 3 and earlier). This was erroneously not taken account for. Definition of the VEC in the devicetrees had to be moved from bcm283x.dtsi to bcm2711.dtsi and bcm2835-common.dtsi to allow for this differentiation. Fixes: 7894bdc6228f ("ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible") Signed-off-by: Mateusz Kwiatkowski Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1626980528-3835-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/boot/dts/bcm2711.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm2835-common.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm283x.dtsi | 8 -------- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index b8a4096192aa..734342c6bb15 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -300,6 +300,14 @@ status = "disabled"; }; + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = ; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index 4119271c979d..c25e797b9060 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -106,6 +106,14 @@ status = "okay"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 0f3be55201a5..a3e06b680947 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -464,14 +464,6 @@ status = "disabled"; }; - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; -- cgit v1.2.3 From 2faff6737a8a684b077264f0aed131526c99eec4 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 7 Aug 2021 13:06:32 +0200 Subject: ARM: dts: bcm2711: fix MDIO #address- and #size-cells The values of #address-cells and #size-cells are swapped. Fix this and avoid the following DT schema warnings for mdio@e14: #address-cells:0:0: 1 was expected #size-cells:0:0: 0 was expected Fixes: be8af7a9e3cc ("ARM: dts: bcm2711-rpi-4: Enable GENET support") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1628334401-6577-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/boot/dts/bcm2711.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 734342c6bb15..3b60297af7f6 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -540,8 +540,8 @@ compatible = "brcm,genet-mdio-v5"; reg = <0xe14 0x8>; reg-names = "mdio"; - #address-cells = <0x0>; - #size-cells = <0x1>; + #address-cells = <0x1>; + #size-cells = <0x0>; }; }; }; -- cgit v1.2.3 From b55ec7528879a822a4d350248daa04bbb27f25fd Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 7 Aug 2021 13:06:33 +0200 Subject: ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states DT schema check complains at sd_io_1v8_reg about the following: [1800000, 1, 3300000, 0] is too long Additional items are not allowed (3300000, 0 were unexpected) So fix the states definition. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1628334401-6577-3-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index f24bdd0870a5..abf8298610a7 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -40,8 +40,8 @@ regulator-always-on; regulator-settling-time-us = <5000>; gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; status = "okay"; }; -- cgit v1.2.3 From c026565fe9be813fe826f7e5533ed763283af5f0 Mon Sep 17 00:00:00 2001 From: Edmund Dea Date: Fri, 4 Dec 2020 14:34:29 -0800 Subject: drm/kmb: Enable alpha blended second plane Enable one additional plane that is alpha blended on top of the primary plane. This also fixes the below warnings when building with -Warray-bounds: drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] v2: corrected previous patch dependecies so it builds Signed-off-by: Edmund Dea Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/ Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_drv.c | 8 ++-- drivers/gpu/drm/kmb/kmb_drv.h | 5 +++ drivers/gpu/drm/kmb/kmb_plane.c | 81 ++++++++++++++++++++++++++++++++++++----- drivers/gpu/drm/kmb/kmb_plane.h | 5 ++- drivers/gpu/drm/kmb/kmb_regs.h | 3 ++ 5 files changed, 87 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c index 1c2f4799f421..12ce669650cc 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.c +++ b/drivers/gpu/drm/kmb/kmb_drv.c @@ -172,10 +172,10 @@ static int kmb_setup_mode_config(struct drm_device *drm) ret = drmm_mode_config_init(drm); if (ret) return ret; - drm->mode_config.min_width = KMB_MIN_WIDTH; - drm->mode_config.min_height = KMB_MIN_HEIGHT; - drm->mode_config.max_width = KMB_MAX_WIDTH; - drm->mode_config.max_height = KMB_MAX_HEIGHT; + drm->mode_config.min_width = KMB_FB_MIN_WIDTH; + drm->mode_config.min_height = KMB_FB_MIN_HEIGHT; + drm->mode_config.max_width = KMB_FB_MAX_WIDTH; + drm->mode_config.max_height = KMB_FB_MAX_HEIGHT; drm->mode_config.funcs = &kmb_mode_config_funcs; ret = kmb_setup_crtc(drm); diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index ebbaa5f422d5..69a62e2d03ff 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -20,6 +20,11 @@ #define DRIVER_MAJOR 1 #define DRIVER_MINOR 1 +#define KMB_FB_MAX_WIDTH 1920 +#define KMB_FB_MAX_HEIGHT 1080 +#define KMB_FB_MIN_WIDTH 1 +#define KMB_FB_MIN_HEIGHT 1 + #define KMB_LCD_DEFAULT_CLK 200000000 #define KMB_SYS_CLK_MHZ 500 diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index ecee6782612d..06b0c42c9e91 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -94,9 +94,10 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, if (ret) return ret; - if (new_plane_state->crtc_w > KMB_MAX_WIDTH || new_plane_state->crtc_h > KMB_MAX_HEIGHT) - return -EINVAL; - if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT) + if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH || + new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT || + new_plane_state->crtc_w < KMB_FB_MIN_WIDTH || + new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT) return -EINVAL; can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY); crtc_state = @@ -277,6 +278,44 @@ static void config_csc(struct kmb_drm_private *kmb, int plane_id) kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]); } +static void kmb_plane_set_alpha(struct kmb_drm_private *kmb, + const struct drm_plane_state *state, + unsigned char plane_id, + unsigned int *val) +{ + u16 plane_alpha = state->alpha; + u16 pixel_blend_mode = state->pixel_blend_mode; + int has_alpha = state->fb->format->has_alpha; + + if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE) + *val |= LCD_LAYER_ALPHA_STATIC; + + if (has_alpha) { + switch (pixel_blend_mode) { + case DRM_MODE_BLEND_PIXEL_NONE: + break; + case DRM_MODE_BLEND_PREMULTI: + *val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT; + break; + case DRM_MODE_BLEND_COVERAGE: + *val |= LCD_LAYER_ALPHA_EMBED; + break; + default: + DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n", + __stringify(pixel_blend_mode), + (long)pixel_blend_mode); + break; + } + } + + if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) { + *val &= LCD_LAYER_ALPHA_DISABLED; + return; + } + + kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha); +} + static void kmb_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { @@ -303,11 +342,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, fb = new_plane_state->fb; if (!fb) return; + num_planes = fb->format->num_planes; kmb_plane = to_kmb_plane(plane); - plane_id = kmb_plane->id; kmb = to_kmb(plane->dev); + plane_id = kmb_plane->id; spin_lock_irq(&kmb->irq_lock); if (kmb->kmb_under_flow || kmb->kmb_flush_done) { @@ -400,20 +440,32 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, config_csc(kmb, plane_id); } + kmb_plane_set_alpha(kmb, plane->state, plane_id, &val); + kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val); + /* Configure LCD_CONTROL */ + ctrl = kmb_read_lcd(kmb, LCD_CONTROL); + + /* Set layer blending config */ + ctrl &= ~LCD_CTRL_ALPHA_ALL; + ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 | + LCD_CTRL_ALPHA_BLEND_VL2; + + ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE; + switch (plane_id) { case LAYER_0: - ctrl = LCD_CTRL_VL1_ENABLE; + ctrl |= LCD_CTRL_VL1_ENABLE; break; case LAYER_1: - ctrl = LCD_CTRL_VL2_ENABLE; + ctrl |= LCD_CTRL_VL2_ENABLE; break; case LAYER_2: - ctrl = LCD_CTRL_GL1_ENABLE; + ctrl |= LCD_CTRL_GL1_ENABLE; break; case LAYER_3: - ctrl = LCD_CTRL_GL2_ENABLE; + ctrl |= LCD_CTRL_GL2_ENABLE; break; } @@ -425,7 +477,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, */ ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL; - kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl); + kmb_write_lcd(kmb, LCD_CONTROL, ctrl); /* Enable pipeline AXI read transactions for the DMA * after setting graphics layers. This must be done @@ -490,6 +542,9 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) enum drm_plane_type plane_type; const u32 *plane_formats; int num_plane_formats; + unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | + BIT(DRM_MODE_BLEND_PREMULTI) | + BIT(DRM_MODE_BLEND_COVERAGE); for (i = 0; i < KMB_MAX_PLANES; i++) { plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL); @@ -521,8 +576,16 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) drm_dbg(drm, "%s : %d i=%d type=%d", __func__, __LINE__, i, plane_type); + drm_plane_create_alpha_property(&plane->base_plane); + + drm_plane_create_blend_mode_property(&plane->base_plane, + blend_caps); + + drm_plane_create_zpos_immutable_property(&plane->base_plane, i); + drm_plane_helper_add(&plane->base_plane, &kmb_plane_helper_funcs); + if (plane_type == DRM_PLANE_TYPE_PRIMARY) { primary = plane; kmb->plane = plane; diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h index 486490f7a3ec..6e8d22cf8819 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.h +++ b/drivers/gpu/drm/kmb/kmb_plane.h @@ -35,6 +35,9 @@ #define POSSIBLE_CRTCS 1 #define to_kmb_plane(x) container_of(x, struct kmb_plane, base_plane) +#define POSSIBLE_CRTCS 1 +#define KMB_MAX_PLANES 2 + enum layer_id { LAYER_0, LAYER_1, @@ -43,8 +46,6 @@ enum layer_id { /* KMB_MAX_PLANES */ }; -#define KMB_MAX_PLANES 1 - enum sub_plane_id { Y_PLANE, U_PLANE, diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h index 48150569f702..9756101b0d32 100644 --- a/drivers/gpu/drm/kmb/kmb_regs.h +++ b/drivers/gpu/drm/kmb/kmb_regs.h @@ -43,8 +43,10 @@ #define LCD_CTRL_OUTPUT_ENABLED BIT(19) #define LCD_CTRL_BPORCH_ENABLE BIT(21) #define LCD_CTRL_FPORCH_ENABLE BIT(22) +#define LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE BIT(23) #define LCD_CTRL_PIPELINE_DMA BIT(28) #define LCD_CTRL_VHSYNC_IDLE_LVL BIT(31) +#define LCD_CTRL_ALPHA_ALL (0xff << 6) /* interrupts */ #define LCD_INT_STATUS (0x4 * 0x001) @@ -115,6 +117,7 @@ #define LCD_LAYER_ALPHA_EMBED BIT(5) #define LCD_LAYER_ALPHA_COMBI (LCD_LAYER_ALPHA_STATIC | \ LCD_LAYER_ALPHA_EMBED) +#define LCD_LAYER_ALPHA_DISABLED ~(LCD_LAYER_ALPHA_COMBI) /* RGB multiplied with alpha */ #define LCD_LAYER_ALPHA_PREMULT BIT(6) #define LCD_LAYER_INVERT_COL BIT(7) -- cgit v1.2.3 From 5e2e412d47f21c1682e701f946d4114f9885c23f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 19 Aug 2021 16:07:53 +0200 Subject: drm/vc4: hdmi: Remove unused struct Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes structures, but not the structures themselves resulting in two warnings. Remove it. Fixes: c7d30623540b ("drm/vc4: hdmi: Remove unused struct") Reported-by: kernel test robot Signed-off-by: Maxime Ripard Reviewed-by: Dave Stevenson Link: https://patchwork.freedesktop.org/patch/msgid/20210819140753.930751-1-maxime@cerno.tech Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/vc4/vc4_hdmi.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index b4b4653fe301..ed8a4b7f8b6e 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -1395,14 +1395,6 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data, return 0; } -static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = { - SND_SOC_DAPM_OUTPUT("TX"), -}; - -static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = { - { "TX", NULL, "Playback" }, -}; - static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = { .name = "vc4-hdmi-cpu-dai-component", }; -- cgit v1.2.3 From c64c8e04a12ed3e2238761e26cda78e72550dc98 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Wed, 15 Sep 2021 19:58:36 +0200 Subject: drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 7 ++- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 4 +- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 97 +++++++++++++++++++--------------- 3 files changed, 61 insertions(+), 47 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c index f75fb157f2ff..016b877051da 100644 --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c @@ -216,11 +216,13 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master, goto err_disable_clk_tmds; } + ret = sun8i_hdmi_phy_init(hdmi->phy); + if (ret) + goto err_disable_clk_tmds; + drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs); drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS); - sun8i_hdmi_phy_init(hdmi->phy); - plat_data->mode_valid = hdmi->quirks->mode_valid; plat_data->use_drm_infoframe = hdmi->quirks->use_drm_infoframe; sun8i_hdmi_phy_set_ops(hdmi->phy, plat_data); @@ -262,6 +264,7 @@ static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master, struct sun8i_dw_hdmi *hdmi = dev_get_drvdata(dev); dw_hdmi_unbind(hdmi->hdmi); + sun8i_hdmi_phy_deinit(hdmi->phy); clk_disable_unprepare(hdmi->clk_tmds); reset_control_assert(hdmi->rst_ctrl); gpiod_set_value(hdmi->ddc_en, 0); diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h index 74f6ed0e2570..bffe1b9cd3dc 100644 --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h @@ -169,6 +169,7 @@ struct sun8i_hdmi_phy { struct clk *clk_phy; struct clk *clk_pll0; struct clk *clk_pll1; + struct device *dev; unsigned int rcal; struct regmap *regs; struct reset_control *rst_phy; @@ -205,7 +206,8 @@ encoder_to_sun8i_dw_hdmi(struct drm_encoder *encoder) int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node); -void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy); +int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy); +void sun8i_hdmi_phy_deinit(struct sun8i_hdmi_phy *phy); void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy, struct dw_hdmi_plat_data *plat_data); diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index c9239708d398..b64d93da651d 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -506,9 +506,60 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy) phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2; } -void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy) +int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy) { + int ret; + + ret = reset_control_deassert(phy->rst_phy); + if (ret) { + dev_err(phy->dev, "Cannot deassert phy reset control: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(phy->clk_bus); + if (ret) { + dev_err(phy->dev, "Cannot enable bus clock: %d\n", ret); + goto err_assert_rst_phy; + } + + ret = clk_prepare_enable(phy->clk_mod); + if (ret) { + dev_err(phy->dev, "Cannot enable mod clock: %d\n", ret); + goto err_disable_clk_bus; + } + + if (phy->variant->has_phy_clk) { + ret = sun8i_phy_clk_create(phy, phy->dev, + phy->variant->has_second_pll); + if (ret) { + dev_err(phy->dev, "Couldn't create the PHY clock\n"); + goto err_disable_clk_mod; + } + + clk_prepare_enable(phy->clk_phy); + } + phy->variant->phy_init(phy); + + return 0; + +err_disable_clk_mod: + clk_disable_unprepare(phy->clk_mod); +err_disable_clk_bus: + clk_disable_unprepare(phy->clk_bus); +err_assert_rst_phy: + reset_control_assert(phy->rst_phy); + + return ret; +} + +void sun8i_hdmi_phy_deinit(struct sun8i_hdmi_phy *phy) +{ + clk_disable_unprepare(phy->clk_mod); + clk_disable_unprepare(phy->clk_bus); + clk_disable_unprepare(phy->clk_phy); + + reset_control_assert(phy->rst_phy); } void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy, @@ -638,6 +689,7 @@ static int sun8i_hdmi_phy_probe(struct platform_device *pdev) return -ENOMEM; phy->variant = (struct sun8i_hdmi_phy_variant *)match->data; + phy->dev = dev; ret = of_address_to_resource(node, 0, &res); if (ret) { @@ -696,47 +748,10 @@ static int sun8i_hdmi_phy_probe(struct platform_device *pdev) goto err_put_clk_pll1; } - ret = reset_control_deassert(phy->rst_phy); - if (ret) { - dev_err(dev, "Cannot deassert phy reset control: %d\n", ret); - goto err_put_rst_phy; - } - - ret = clk_prepare_enable(phy->clk_bus); - if (ret) { - dev_err(dev, "Cannot enable bus clock: %d\n", ret); - goto err_deassert_rst_phy; - } - - ret = clk_prepare_enable(phy->clk_mod); - if (ret) { - dev_err(dev, "Cannot enable mod clock: %d\n", ret); - goto err_disable_clk_bus; - } - - if (phy->variant->has_phy_clk) { - ret = sun8i_phy_clk_create(phy, dev, - phy->variant->has_second_pll); - if (ret) { - dev_err(dev, "Couldn't create the PHY clock\n"); - goto err_disable_clk_mod; - } - - clk_prepare_enable(phy->clk_phy); - } - platform_set_drvdata(pdev, phy); return 0; -err_disable_clk_mod: - clk_disable_unprepare(phy->clk_mod); -err_disable_clk_bus: - clk_disable_unprepare(phy->clk_bus); -err_deassert_rst_phy: - reset_control_assert(phy->rst_phy); -err_put_rst_phy: - reset_control_put(phy->rst_phy); err_put_clk_pll1: clk_put(phy->clk_pll1); err_put_clk_pll0: @@ -753,12 +768,6 @@ static int sun8i_hdmi_phy_remove(struct platform_device *pdev) { struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev); - clk_disable_unprepare(phy->clk_mod); - clk_disable_unprepare(phy->clk_bus); - clk_disable_unprepare(phy->clk_phy); - - reset_control_assert(phy->rst_phy); - reset_control_put(phy->rst_phy); clk_put(phy->clk_pll0); -- cgit v1.2.3 From f732e2e34aa08493fdd762f3daa4e5f16bbf1e45 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 6 Sep 2021 10:56:28 +1000 Subject: drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows Prevent NVD core channel error code 67 occuring and hanging display, managed to reproduce on GA102 while testing suspend/resume scenarios. Required extension of earlier commit to fix interactions with EFI. Fixes: e78b1b545c6c ("drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences") Signed-off-by: Ben Skeggs Cc: Lyude Paul Cc: Karol Herbst Cc: # v5.12+ Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20210906005628.11499-2-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/dispnv50/head.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/head.c b/drivers/gpu/drm/nouveau/dispnv50/head.c index d66f97280282..72099d1e4816 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/head.c +++ b/drivers/gpu/drm/nouveau/dispnv50/head.c @@ -52,6 +52,7 @@ nv50_head_flush_clr(struct nv50_head *head, void nv50_head_flush_set_wndw(struct nv50_head *head, struct nv50_head_atom *asyh) { + if (asyh->set.curs ) head->func->curs_set(head, asyh); if (asyh->set.olut ) { asyh->olut.offset = nv50_lut_load(&head->olut, asyh->olut.buffer, @@ -67,7 +68,6 @@ nv50_head_flush_set(struct nv50_head *head, struct nv50_head_atom *asyh) if (asyh->set.view ) head->func->view (head, asyh); if (asyh->set.mode ) head->func->mode (head, asyh); if (asyh->set.core ) head->func->core_set(head, asyh); - if (asyh->set.curs ) head->func->curs_set(head, asyh); if (asyh->set.base ) head->func->base (head, asyh); if (asyh->set.ovly ) head->func->ovly (head, asyh); if (asyh->set.dither ) head->func->dither (head, asyh); -- cgit v1.2.3 From 49b2dfc081826874705b27f7970631319628ee7f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 17 Sep 2021 08:04:06 +1000 Subject: drm/nouveau/ga102-: support ttm buffer moves via copy engine We don't currently have any kind of real acceleration on Ampere GPUs, but the TTM memcpy() fallback paths aren't really designed to handle copies between different devices, such as on Optimus systems, and result in a kernel OOPS. A few options were investigated to try and fix this, but didn't work out, and likely would have resulted in a very unpleasant experience for users anyway. This commit adds just enough support for setting up a single channel connected to a copy engine, which the kernel can use to accelerate the buffer copies between devices. Userspace has no access to this incomplete channel support, but it's suitable for TTM's needs. A more complete implementation of host(fifo) for Ampere GPUs is in the works, but the required changes are far too invasive that they would be unsuitable to backport to fix this issue on current kernels. v2: fix GPFIFO length in RAMFC (reported by Karol) Signed-off-by: Ben Skeggs Cc: Lyude Paul Cc: Karol Herbst Cc: # v5.12+ Reviewed-by: Karol Herbst Tested-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/include/nvif/class.h | 2 + drivers/gpu/drm/nouveau/include/nvkm/engine/fifo.h | 1 + drivers/gpu/drm/nouveau/nouveau_bo.c | 1 + drivers/gpu/drm/nouveau/nouveau_chan.c | 6 +- drivers/gpu/drm/nouveau/nouveau_drm.c | 4 + drivers/gpu/drm/nouveau/nv84_fence.c | 2 +- drivers/gpu/drm/nouveau/nvkm/engine/device/base.c | 3 + drivers/gpu/drm/nouveau/nvkm/engine/fifo/Kbuild | 1 + drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c | 308 +++++++++++++++++++++ drivers/gpu/drm/nouveau/nvkm/subdev/top/ga100.c | 7 +- 10 files changed, 329 insertions(+), 6 deletions(-) create mode 100644 drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c diff --git a/drivers/gpu/drm/nouveau/include/nvif/class.h b/drivers/gpu/drm/nouveau/include/nvif/class.h index c68cc957248e..a582c0cb0cb0 100644 --- a/drivers/gpu/drm/nouveau/include/nvif/class.h +++ b/drivers/gpu/drm/nouveau/include/nvif/class.h @@ -71,6 +71,7 @@ #define PASCAL_CHANNEL_GPFIFO_A /* cla06f.h */ 0x0000c06f #define VOLTA_CHANNEL_GPFIFO_A /* clc36f.h */ 0x0000c36f #define TURING_CHANNEL_GPFIFO_A /* clc36f.h */ 0x0000c46f +#define AMPERE_CHANNEL_GPFIFO_B /* clc36f.h */ 0x0000c76f #define NV50_DISP /* cl5070.h */ 0x00005070 #define G82_DISP /* cl5070.h */ 0x00008270 @@ -200,6 +201,7 @@ #define PASCAL_DMA_COPY_B 0x0000c1b5 #define VOLTA_DMA_COPY_A 0x0000c3b5 #define TURING_DMA_COPY_A 0x0000c5b5 +#define AMPERE_DMA_COPY_B 0x0000c7b5 #define FERMI_DECOMPRESS 0x000090b8 diff --git a/drivers/gpu/drm/nouveau/include/nvkm/engine/fifo.h b/drivers/gpu/drm/nouveau/include/nvkm/engine/fifo.h index 54fab7cc36c1..64ee82c7c1be 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/engine/fifo.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/engine/fifo.h @@ -77,4 +77,5 @@ int gp100_fifo_new(struct nvkm_device *, enum nvkm_subdev_type, int inst, struct int gp10b_fifo_new(struct nvkm_device *, enum nvkm_subdev_type, int inst, struct nvkm_fifo **); int gv100_fifo_new(struct nvkm_device *, enum nvkm_subdev_type, int inst, struct nvkm_fifo **); int tu102_fifo_new(struct nvkm_device *, enum nvkm_subdev_type, int inst, struct nvkm_fifo **); +int ga102_fifo_new(struct nvkm_device *, enum nvkm_subdev_type, int inst, struct nvkm_fifo **); #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 6d07e653f82d..c58bcdba2c7a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -844,6 +844,7 @@ nouveau_bo_move_init(struct nouveau_drm *drm) struct ttm_resource *, struct ttm_resource *); int (*init)(struct nouveau_channel *, u32 handle); } _methods[] = { + { "COPY", 4, 0xc7b5, nve0_bo_move_copy, nve0_bo_move_init }, { "COPY", 4, 0xc5b5, nve0_bo_move_copy, nve0_bo_move_init }, { "GRCE", 0, 0xc5b5, nve0_bo_move_copy, nvc0_bo_move_init }, { "COPY", 4, 0xc3b5, nve0_bo_move_copy, nve0_bo_move_init }, diff --git a/drivers/gpu/drm/nouveau/nouveau_chan.c b/drivers/gpu/drm/nouveau/nouveau_chan.c index 80099ef75702..ea7769135b0d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_chan.c +++ b/drivers/gpu/drm/nouveau/nouveau_chan.c @@ -250,7 +250,8 @@ static int nouveau_channel_ind(struct nouveau_drm *drm, struct nvif_device *device, u64 runlist, bool priv, struct nouveau_channel **pchan) { - static const u16 oclasses[] = { TURING_CHANNEL_GPFIFO_A, + static const u16 oclasses[] = { AMPERE_CHANNEL_GPFIFO_B, + TURING_CHANNEL_GPFIFO_A, VOLTA_CHANNEL_GPFIFO_A, PASCAL_CHANNEL_GPFIFO_A, MAXWELL_CHANNEL_GPFIFO_A, @@ -386,7 +387,8 @@ nouveau_channel_init(struct nouveau_channel *chan, u32 vram, u32 gart) nvif_object_map(&chan->user, NULL, 0); - if (chan->user.oclass >= FERMI_CHANNEL_GPFIFO) { + if (chan->user.oclass >= FERMI_CHANNEL_GPFIFO && + chan->user.oclass < AMPERE_CHANNEL_GPFIFO_B) { ret = nvif_notify_ctor(&chan->user, "abi16ChanKilled", nouveau_channel_killed, true, NV906F_V0_NTFY_KILLED, diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 1f828c9f691c..6109cd9e3399 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -345,6 +345,9 @@ nouveau_accel_gr_init(struct nouveau_drm *drm) u32 arg0, arg1; int ret; + if (device->info.family >= NV_DEVICE_INFO_V0_AMPERE) + return; + /* Allocate channel that has access to the graphics engine. */ if (device->info.family >= NV_DEVICE_INFO_V0_KEPLER) { arg0 = nvif_fifo_runlist(device, NV_DEVICE_HOST_RUNLIST_ENGINES_GR); @@ -469,6 +472,7 @@ nouveau_accel_init(struct nouveau_drm *drm) case PASCAL_CHANNEL_GPFIFO_A: case VOLTA_CHANNEL_GPFIFO_A: case TURING_CHANNEL_GPFIFO_A: + case AMPERE_CHANNEL_GPFIFO_B: ret = nvc0_fence_create(drm); break; default: diff --git a/drivers/gpu/drm/nouveau/nv84_fence.c b/drivers/gpu/drm/nouveau/nv84_fence.c index 7c9c928c3196..c3526a8622e3 100644 --- a/drivers/gpu/drm/nouveau/nv84_fence.c +++ b/drivers/gpu/drm/nouveau/nv84_fence.c @@ -204,7 +204,7 @@ nv84_fence_create(struct nouveau_drm *drm) priv->base.context_new = nv84_fence_context_new; priv->base.context_del = nv84_fence_context_del; - priv->base.uevent = true; + priv->base.uevent = drm->client.device.info.family < NV_DEVICE_INFO_V0_AMPERE; mutex_init(&priv->mutex); diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c index 93ddf63d1114..ca75c5f6ecaf 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c @@ -2602,6 +2602,7 @@ nv172_chipset = { .top = { 0x00000001, ga100_top_new }, .disp = { 0x00000001, ga102_disp_new }, .dma = { 0x00000001, gv100_dma_new }, + .fifo = { 0x00000001, ga102_fifo_new }, }; static const struct nvkm_device_chip @@ -2622,6 +2623,7 @@ nv174_chipset = { .top = { 0x00000001, ga100_top_new }, .disp = { 0x00000001, ga102_disp_new }, .dma = { 0x00000001, gv100_dma_new }, + .fifo = { 0x00000001, ga102_fifo_new }, }; static const struct nvkm_device_chip @@ -2642,6 +2644,7 @@ nv177_chipset = { .top = { 0x00000001, ga100_top_new }, .disp = { 0x00000001, ga102_disp_new }, .dma = { 0x00000001, gv100_dma_new }, + .fifo = { 0x00000001, ga102_fifo_new }, }; static int diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/Kbuild b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/Kbuild index 3209eb7af65f..5e831d347a95 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/Kbuild +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/Kbuild @@ -18,6 +18,7 @@ nvkm-y += nvkm/engine/fifo/gp100.o nvkm-y += nvkm/engine/fifo/gp10b.o nvkm-y += nvkm/engine/fifo/gv100.o nvkm-y += nvkm/engine/fifo/tu102.o +nvkm-y += nvkm/engine/fifo/ga102.o nvkm-y += nvkm/engine/fifo/chan.o nvkm-y += nvkm/engine/fifo/channv50.o diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c new file mode 100644 index 000000000000..f897bef13acf --- /dev/null +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c @@ -0,0 +1,308 @@ +/* + * Copyright 2021 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#define ga102_fifo(p) container_of((p), struct ga102_fifo, base.engine) +#define ga102_chan(p) container_of((p), struct ga102_chan, object) +#include +#include "user.h" + +#include +#include +#include +#include + +#include +#include +#include + +struct ga102_fifo { + struct nvkm_fifo base; +}; + +struct ga102_chan { + struct nvkm_object object; + + struct { + u32 runl; + u32 chan; + } ctrl; + + struct nvkm_memory *mthd; + struct nvkm_memory *inst; + struct nvkm_memory *user; + struct nvkm_memory *runl; + + struct nvkm_vmm *vmm; +}; + +static int +ga102_chan_sclass(struct nvkm_object *object, int index, struct nvkm_oclass *oclass) +{ + if (index == 0) { + oclass->ctor = nvkm_object_new; + oclass->base = (struct nvkm_sclass) { -1, -1, AMPERE_DMA_COPY_B }; + return 0; + } + + return -EINVAL; +} + +static int +ga102_chan_map(struct nvkm_object *object, void *argv, u32 argc, + enum nvkm_object_map *type, u64 *addr, u64 *size) +{ + struct ga102_chan *chan = ga102_chan(object); + struct nvkm_device *device = chan->object.engine->subdev.device; + u64 bar2 = nvkm_memory_bar2(chan->user); + + if (bar2 == ~0ULL) + return -EFAULT; + + *type = NVKM_OBJECT_MAP_IO; + *addr = device->func->resource_addr(device, 3) + bar2; + *size = 0x1000; + return 0; +} + +static int +ga102_chan_fini(struct nvkm_object *object, bool suspend) +{ + struct ga102_chan *chan = ga102_chan(object); + struct nvkm_device *device = chan->object.engine->subdev.device; + + nvkm_wr32(device, chan->ctrl.chan, 0x00000003); + + nvkm_wr32(device, chan->ctrl.runl + 0x098, 0x01000000); + nvkm_msec(device, 2000, + if (!(nvkm_rd32(device, chan->ctrl.runl + 0x098) & 0x00100000)) + break; + ); + + nvkm_wr32(device, chan->ctrl.runl + 0x088, 0); + + nvkm_wr32(device, chan->ctrl.chan, 0xffffffff); + return 0; +} + +static int +ga102_chan_init(struct nvkm_object *object) +{ + struct ga102_chan *chan = ga102_chan(object); + struct nvkm_device *device = chan->object.engine->subdev.device; + + nvkm_mask(device, chan->ctrl.runl + 0x300, 0x80000000, 0x80000000); + + nvkm_wr32(device, chan->ctrl.runl + 0x080, lower_32_bits(nvkm_memory_addr(chan->runl))); + nvkm_wr32(device, chan->ctrl.runl + 0x084, upper_32_bits(nvkm_memory_addr(chan->runl))); + nvkm_wr32(device, chan->ctrl.runl + 0x088, 2); + + nvkm_wr32(device, chan->ctrl.chan, 0x00000002); + nvkm_wr32(device, chan->ctrl.runl + 0x0090, 0); + return 0; +} + +static void * +ga102_chan_dtor(struct nvkm_object *object) +{ + struct ga102_chan *chan = ga102_chan(object); + + if (chan->vmm) { + nvkm_vmm_part(chan->vmm, chan->inst); + nvkm_vmm_unref(&chan->vmm); + } + + nvkm_memory_unref(&chan->runl); + nvkm_memory_unref(&chan->user); + nvkm_memory_unref(&chan->inst); + nvkm_memory_unref(&chan->mthd); + return chan; +} + +static const struct nvkm_object_func +ga102_chan = { + .dtor = ga102_chan_dtor, + .init = ga102_chan_init, + .fini = ga102_chan_fini, + .map = ga102_chan_map, + .sclass = ga102_chan_sclass, +}; + +static int +ga102_chan_new(struct nvkm_device *device, + const struct nvkm_oclass *oclass, void *argv, u32 argc, struct nvkm_object **pobject) +{ + struct volta_channel_gpfifo_a_v0 *args = argv; + struct nvkm_top_device *tdev; + struct nvkm_vmm *vmm; + struct ga102_chan *chan; + int ret; + + if (argc != sizeof(*args)) + return -ENOSYS; + + vmm = nvkm_uvmm_search(oclass->client, args->vmm); + if (IS_ERR(vmm)) + return PTR_ERR(vmm); + + if (!(chan = kzalloc(sizeof(*chan), GFP_KERNEL))) + return -ENOMEM; + + nvkm_object_ctor(&ga102_chan, oclass, &chan->object); + *pobject = &chan->object; + + list_for_each_entry(tdev, &device->top->device, head) { + if (tdev->type == NVKM_ENGINE_CE) { + chan->ctrl.runl = tdev->runlist; + break; + } + } + + if (!chan->ctrl.runl) + return -ENODEV; + + chan->ctrl.chan = nvkm_rd32(device, chan->ctrl.runl + 0x004) & 0xfffffff0; + args->token = nvkm_rd32(device, chan->ctrl.runl + 0x008) & 0xffff0000; + + ret = nvkm_memory_new(device, NVKM_MEM_TARGET_INST, 0x1000, 0x1000, true, &chan->mthd); + if (ret) + return ret; + + ret = nvkm_memory_new(device, NVKM_MEM_TARGET_INST, 0x1000, 0x1000, true, &chan->inst); + if (ret) + return ret; + + nvkm_kmap(chan->inst); + nvkm_wo32(chan->inst, 0x010, 0x0000face); + nvkm_wo32(chan->inst, 0x030, 0x7ffff902); + nvkm_wo32(chan->inst, 0x048, lower_32_bits(args->ioffset)); + nvkm_wo32(chan->inst, 0x04c, upper_32_bits(args->ioffset) | + (order_base_2(args->ilength / 8) << 16)); + nvkm_wo32(chan->inst, 0x084, 0x20400000); + nvkm_wo32(chan->inst, 0x094, 0x30000001); + nvkm_wo32(chan->inst, 0x0ac, 0x00020000); + nvkm_wo32(chan->inst, 0x0e4, 0x00000000); + nvkm_wo32(chan->inst, 0x0e8, 0); + nvkm_wo32(chan->inst, 0x0f4, 0x00001000); + nvkm_wo32(chan->inst, 0x0f8, 0x10003080); + nvkm_mo32(chan->inst, 0x218, 0x00000000, 0x00000000); + nvkm_wo32(chan->inst, 0x220, lower_32_bits(nvkm_memory_bar2(chan->mthd))); + nvkm_wo32(chan->inst, 0x224, upper_32_bits(nvkm_memory_bar2(chan->mthd))); + nvkm_done(chan->inst); + + ret = nvkm_memory_new(device, NVKM_MEM_TARGET_INST, 0x1000, 0x1000, true, &chan->user); + if (ret) + return ret; + + ret = nvkm_memory_new(device, NVKM_MEM_TARGET_INST, 0x1000, 0x1000, true, &chan->runl); + if (ret) + return ret; + + nvkm_kmap(chan->runl); + nvkm_wo32(chan->runl, 0x00, 0x80030001); + nvkm_wo32(chan->runl, 0x04, 1); + nvkm_wo32(chan->runl, 0x08, 0); + nvkm_wo32(chan->runl, 0x0c, 0x00000000); + nvkm_wo32(chan->runl, 0x10, lower_32_bits(nvkm_memory_addr(chan->user))); + nvkm_wo32(chan->runl, 0x14, upper_32_bits(nvkm_memory_addr(chan->user))); + nvkm_wo32(chan->runl, 0x18, lower_32_bits(nvkm_memory_addr(chan->inst))); + nvkm_wo32(chan->runl, 0x1c, upper_32_bits(nvkm_memory_addr(chan->inst))); + nvkm_done(chan->runl); + + ret = nvkm_vmm_join(vmm, chan->inst); + if (ret) + return ret; + + chan->vmm = nvkm_vmm_ref(vmm); + return 0; +} + +static const struct nvkm_device_oclass +ga102_chan_oclass = { + .ctor = ga102_chan_new, +}; + +static int +ga102_user_new(struct nvkm_device *device, + const struct nvkm_oclass *oclass, void *argv, u32 argc, struct nvkm_object **pobject) +{ + return tu102_fifo_user_new(oclass, argv, argc, pobject); +} + +static const struct nvkm_device_oclass +ga102_user_oclass = { + .ctor = ga102_user_new, +}; + +static int +ga102_fifo_sclass(struct nvkm_oclass *oclass, int index, const struct nvkm_device_oclass **class) +{ + if (index == 0) { + oclass->base = (struct nvkm_sclass) { -1, -1, VOLTA_USERMODE_A }; + *class = &ga102_user_oclass; + return 0; + } else + if (index == 1) { + oclass->base = (struct nvkm_sclass) { 0, 0, AMPERE_CHANNEL_GPFIFO_B }; + *class = &ga102_chan_oclass; + return 0; + } + + return 2; +} + +static int +ga102_fifo_info(struct nvkm_engine *engine, u64 mthd, u64 *data) +{ + switch (mthd) { + case NV_DEVICE_HOST_CHANNELS: *data = 1; return 0; + default: + break; + } + + return -ENOSYS; +} + +static void * +ga102_fifo_dtor(struct nvkm_engine *engine) +{ + return ga102_fifo(engine); +} + +static const struct nvkm_engine_func +ga102_fifo = { + .dtor = ga102_fifo_dtor, + .info = ga102_fifo_info, + .base.sclass = ga102_fifo_sclass, +}; + +int +ga102_fifo_new(struct nvkm_device *device, enum nvkm_subdev_type type, int inst, + struct nvkm_fifo **pfifo) +{ + struct ga102_fifo *fifo; + + if (!(fifo = kzalloc(sizeof(*fifo), GFP_KERNEL))) + return -ENOMEM; + + nvkm_engine_ctor(&ga102_fifo, device, type, inst, true, &fifo->base.engine); + *pfifo = &fifo->base; + return 0; +} diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/top/ga100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/top/ga100.c index 31933f3e5a07..c982d834c8d9 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/top/ga100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/top/ga100.c @@ -54,7 +54,7 @@ ga100_top_oneinit(struct nvkm_top *top) info->reset = (data & 0x0000001f); break; case 2: - info->runlist = (data & 0x0000fc00) >> 10; + info->runlist = (data & 0x00fffc00); info->engine = (data & 0x00000003); break; default: @@ -85,9 +85,10 @@ ga100_top_oneinit(struct nvkm_top *top) } nvkm_debug(subdev, "%02x.%d (%8s): addr %06x fault %2d " - "runlist %2d engine %2d reset %2d\n", type, inst, + "runlist %6x engine %2d reset %2d\n", type, inst, info->type == NVKM_SUBDEV_NR ? "????????" : nvkm_subdev_type[info->type], - info->addr, info->fault, info->runlist, info->engine, info->reset); + info->addr, info->fault, info->runlist < 0 ? 0 : info->runlist, + info->engine, info->reset); info = NULL; } -- cgit v1.2.3 From 64ec4912c51ad782067e56b106735eaf62ea035c Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Thu, 16 Sep 2021 15:29:07 -0500 Subject: drm/rockchip: Update crtc fixup to account for fractional clk change After commit 928f9e268611 ("clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience") was merged it appears that the DSI panel on my Odroid Go Advance stopped working. Upon closer examination of the problem, it looks like it was the fixup in the rockchip_drm_vop.c file was causing the issue. The changes made to the clk driver appear to change some assumptions made in the fixup. After debugging the working 5.14 kernel and the no-longer working 5.15 kernel, it looks like this was broken all along but still worked, whereas after the fractional clock change it stopped working despite the issue (it went from sort-of broken to very broken). In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the parent clock and attempting to divide the requested value from it (17000000/17000999 = 0), then subtracting 1 from it (making it -1), and running it through fls_long to get 64. It would then subtract the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a denominator of 1 from the clk driver. The driver seemingly would try again and get a correct 1:1 value later, and then move on. Output from my 5.14 kernel (with some printfs for good measure): [ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.855980] Clock is dclk_vopb_frac [ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16 [ 2.903529] Clock is dclk_vopb_frac [ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 [ 2.903579] Clock is dclk_vopb_frac [ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 Contrast this with 5.15 after the clk change where the rate of 17000999 was getting passed and resulted in numerators/denomiators of 17001/ 17000. Output from my 5.15 kernel (with some printfs added for good measure): [ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017 [ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 I have tested the change extensively on my Odroid Go Advance (Rockchip RK3326) and it appears to work well. However, this change will affect all Rockchip SoCs that use this driver so I believe further testing is warranted. Please note that without this change I can confirm at least all PX30s with DSI panels will stop working with the 5.15 kernel. Upon advice from Doug Anderson it was decided that we would first check if the clock rate can be set exactly as requested, and only if it could not would we then add 999 to it and attempt the process again. This way we can preserve the behavior for clocks that still need it while resolving the specific issue for the PX30 and DSI panels (since it is using a fractional clock). Changes since v2: - Moved fixes to correct location. Changes since v1: - Made the addition of 999 conditional based on whether the clock subsystem can set the actual clock rate as requested. - Updated the notes in the fixup routine to reflect this new behavior. - Added reference to original commit, as this has technically been broken since then however only now is it an issue due to the clock changes. Fixes: 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users") Signed-off-by: Chris Morgan Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20210916202907.18394-1-macroalpha82@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index ba9e14da41b4..a25b98b7f5bd 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1174,26 +1174,24 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc, * * Action plan: * - * 1. When DRM gives us a mode, we should add 999 Hz to it. That way - * if the clock we need is 60000001 Hz (~60 MHz) and DRM tells us to - * make 60000 kHz then the clock framework will actually give us - * the right clock. + * 1. Try to set the exact rate first, and confirm the clock framework + * can provide it. * - * NOTE: if the PLL (maybe through a divider) could actually make - * a clock rate 999 Hz higher instead of the one we want then this - * could be a problem. Unfortunately there's not much we can do - * since it's baked into DRM to use kHz. It shouldn't matter in - * practice since Rockchip PLLs are controlled by tables and - * even if there is a divider in the middle I wouldn't expect PLL - * rates in the table that are just a few kHz different. + * 2. If the clock framework cannot provide the exact rate, we should + * add 999 Hz to the requested rate. That way if the clock we need + * is 60000001 Hz (~60 MHz) and DRM tells us to make 60000 kHz then + * the clock framework will actually give us the right clock. * - * 2. Get the clock framework to round the rate for us to tell us + * 3. Get the clock framework to round the rate for us to tell us * what it will actually make. * - * 3. Store the rounded up rate so that we don't need to worry about + * 4. Store the rounded up rate so that we don't need to worry about * this in the actual clk_set_rate(). */ - rate = clk_round_rate(vop->dclk, adjusted_mode->clock * 1000 + 999); + rate = clk_round_rate(vop->dclk, adjusted_mode->clock * 1000); + if (rate / 1000 != adjusted_mode->clock) + rate = clk_round_rate(vop->dclk, + adjusted_mode->clock * 1000 + 999); adjusted_mode->clock = DIV_ROUND_UP(rate, 1000); return true; -- cgit v1.2.3 From 0689ea432a85ad1a108f47c3d90b6feae322c7f9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 21 Sep 2021 19:07:35 +1000 Subject: drm/nouveau/fifo/ga102: initialise chid on return from channel creation Turns out caller isn't zero-initialised after-all. Fixes: 49b2dfc08182 ("drm/nouveau/ga102-: support ttm buffer moves via copy engine") Reported-by: Karol Herbst Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20210921090735.247236-1-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c index f897bef13acf..c630dbd2911a 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/ga102.c @@ -179,6 +179,9 @@ ga102_chan_new(struct nvkm_device *device, return -ENODEV; chan->ctrl.chan = nvkm_rd32(device, chan->ctrl.runl + 0x004) & 0xfffffff0; + + args->chid = 0; + args->inst = 0; args->token = nvkm_rd32(device, chan->ctrl.runl + 0x008) & 0xffff0000; ret = nvkm_memory_new(device, NVKM_MEM_TARGET_INST, 0x1000, 0x1000, true, &chan->mthd); -- cgit v1.2.3 From 990a9ff072776908bf0654e23df69c30aa9ff945 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 19 Aug 2021 12:10:19 +0200 Subject: dt-bindings: panel: ili9341: correct indentation Correct indentation warning: ilitek,ili9341.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation) Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210819101020.26368-1-krzysztof.kozlowski@canonical.com (cherry picked from commit 333ba0d9d5d5a2cf1f6bbb754045e4f2cb3ed22d) Link: https://lore.kernel.org/dri-devel/CAL_JsqKcTfgnXNYzGDSFhKS2udhw2Dvk04ODwTxUdDRQjKdT0Q@mail.gmail.com/ Signed-off-by: Maxime Ripard Signed-off-by: Maarten Lankhorst --- Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 2ed010f91e2d..20ce88ab4b3a 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -22,7 +22,7 @@ properties: items: - enum: # ili9341 240*320 Color on stm32f429-disco board - - st,sf-tc240t-9370-t + - st,sf-tc240t-9370-t - const: ilitek,ili9341 reg: true -- cgit v1.2.3 From 413e8d06ad896dae9bbc6f97b0abea5eae5495f1 Mon Sep 17 00:00:00 2001 From: Christophe Branchereau Date: Tue, 14 Sep 2021 11:27:16 +0200 Subject: drm/panel: abt-y030xx067a: yellow tint fix The previous parameters caused an unbalanced yellow tint. Fixes: 7467389bdafb ("drm/panel: Add ABT Y030XX067A 3.0" 320x480 panel") Signed-off-by: Christophe Branchereau Acked-by: Sam Ravnborg [Paul: Add Fixes: tag, and fix case and punctuation in commit message] Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20210914092716.2370039-1-cbranchereau@gmail.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/panel/panel-abt-y030xx067a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c index 2d8794d495d0..3d8a9ab47cae 100644 --- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c +++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c @@ -146,8 +146,8 @@ static const struct reg_sequence y030xx067a_init_sequence[] = { { 0x09, REG09_SUB_BRIGHT_R(0x20) }, { 0x0a, REG0A_SUB_BRIGHT_B(0x20) }, { 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN }, - { 0x0c, REG0C_CONTRAST_R(0x10) }, - { 0x0d, REG0D_CONTRAST_G(0x10) }, + { 0x0c, REG0C_CONTRAST_R(0x00) }, + { 0x0d, REG0D_CONTRAST_G(0x00) }, { 0x0e, REG0E_CONTRAST_B(0x10) }, { 0x0f, 0 }, { 0x10, REG10_BRIGHT(0x7f) }, -- cgit v1.2.3 From ec7cc3f74b4236860ce612656aa5be7936d1c594 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Sep 2021 16:52:10 +0200 Subject: fbdev: simplefb: fix Kconfig dependencies Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Acked-by: Rob Herring # for drivers/of/ Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann Cc: Thomas Zimmermann Cc: Daniel Vetter # fbdev support Cc: Maxime Ripard Cc: Liam Girdwood Cc: Mark Brown Cc: Daniel Vetter Cc: Borislav Petkov Cc: Javier Martinez Canillas Cc: Randy Dunlap Cc: Geert Uytterhoeven Cc: Peter Collingbourne Cc: Andy Shevchenko Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: # v5.14+ Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.org Signed-off-by: Maarten Lankhorst --- drivers/of/base.c | 1 + drivers/video/fbdev/Kconfig | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index f720c0d246f2..0ac17256258d 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -36,6 +36,7 @@ LIST_HEAD(aliases_lookup); struct device_node *of_root; EXPORT_SYMBOL(of_root); struct device_node *of_chosen; +EXPORT_SYMBOL(of_chosen); struct device_node *of_aliases; struct device_node *of_stdout; static const char *of_stdout_options; diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index b26b79dfcac9..6ed5e608dd04 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -2193,8 +2193,9 @@ config FB_HYPERV This framebuffer driver supports Microsoft Hyper-V Synthetic Video. config FB_SIMPLE - bool "Simple framebuffer support" - depends on (FB = y) && !DRM_SIMPLEDRM + tristate "Simple framebuffer support" + depends on FB + depends on !DRM_SIMPLEDRM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From 11b8e2bb986d23157e82e267fb8cc6b281dfdee9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Sep 2021 22:21:02 +0100 Subject: video: fbdev: gbefb: Only instantiate device when built for IP32 The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.org Signed-off-by: Maarten Lankhorst --- drivers/video/fbdev/gbefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/gbefb.c b/drivers/video/fbdev/gbefb.c index c5b99a4861e8..6b4d5a7f3e15 100644 --- a/drivers/video/fbdev/gbefb.c +++ b/drivers/video/fbdev/gbefb.c @@ -1267,7 +1267,7 @@ static struct platform_device *gbefb_device; static int __init gbefb_init(void) { int ret = platform_driver_register(&gbefb_driver); - if (!ret) { + if (IS_ENABLED(CONFIG_SGI_IP32) && !ret) { gbefb_device = platform_device_alloc("gbefb", 0); if (gbefb_device) { ret = platform_device_add(gbefb_device); -- cgit v1.2.3 From b67929808fe46d67cc9357b0112e4549076db4c5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Oct 2021 19:53:12 -0700 Subject: DRM: delete DRM IRQ legacy midlayer docs Remove documentation associated with the removal of the DRM IRQ legacy midlayer. Eliminates these documentation warnings: ../drivers/gpu/drm/drm_irq.c:1: warning: 'irq helpers' not found ../drivers/gpu/drm/drm_irq.c:1: warning: no structured comments found Fixes: c1736b9008cb ("drm: IRQ midlayer is now legacy") Signed-off-by: Randy Dunlap Cc: Thomas Zimmermann Cc: Sam Ravnborg Cc: dri-devel@lists.freedesktop.org Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20211005025312.20913-1-rdunlap@infradead.org Signed-off-by: Maarten Lankhorst --- Documentation/gpu/drm-internals.rst | 9 --------- 1 file changed, 9 deletions(-) diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 06af044c882f..607f78f0f189 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -111,15 +111,6 @@ Component Helper Usage .. kernel-doc:: drivers/gpu/drm/drm_drv.c :doc: component helper usage recommendations -IRQ Helper Library -~~~~~~~~~~~~~~~~~~ - -.. kernel-doc:: drivers/gpu/drm/drm_irq.c - :doc: irq helpers - -.. kernel-doc:: drivers/gpu/drm/drm_irq.c - :export: - Memory Manager Initialization ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- cgit v1.2.3 From bcf34aa5082ee2343574bc3f4d1c126030913e54 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Wed, 2 Dec 2020 19:02:20 -0500 Subject: drm/nouveau: avoid a use-after-free when BO init fails nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding Signed-off-by: Jeremy Cline Reviewed-by: Lyude Paul Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 5b27845075a1..8c2ecc282723 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -247,10 +247,8 @@ nouveau_gem_new(struct nouveau_cli *cli, u64 size, int align, uint32_t domain, } ret = nouveau_bo_init(nvbo, size, align, domain, NULL, NULL); - if (ret) { - nouveau_bo_ref(NULL, &nvbo); + if (ret) return ret; - } /* we restrict allowed domains on nv50+ to only the types * that were requested at creation time. not possibly on -- cgit v1.2.3 From 0b3d4945cc7e7ea1acd52cb06dfa83bfe265b6d5 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Sat, 11 Sep 2021 15:50:22 +0800 Subject: drm/nouveau/kms/nv50-: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/dispnv50/crc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/dispnv50/crc.c b/drivers/gpu/drm/nouveau/dispnv50/crc.c index b8c31b697797..66f32d965c72 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/crc.c +++ b/drivers/gpu/drm/nouveau/dispnv50/crc.c @@ -704,6 +704,7 @@ static const struct file_operations nv50_crc_flip_threshold_fops = { .open = nv50_crc_debugfs_flip_threshold_open, .read = seq_read, .write = nv50_crc_debugfs_flip_threshold_set, + .release = single_release, }; int nv50_head_crc_late_register(struct nv50_head *head) -- cgit v1.2.3 From f5a8703a9c418c6fc54eb772712dfe7641e3991c Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Sat, 11 Sep 2021 15:50:23 +0800 Subject: drm/nouveau/debugfs: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c index c2bc05eb2e54..1cbe01048b93 100644 --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c @@ -207,6 +207,7 @@ static const struct file_operations nouveau_pstate_fops = { .open = nouveau_debugfs_pstate_open, .read = seq_read, .write = nouveau_debugfs_pstate_set, + .release = single_release, }; static struct drm_info_list nouveau_debugfs_list[] = { -- cgit v1.2.3 From a14a14595dcade4bf31e50909a6958ed2566c058 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Thu, 16 Sep 2021 11:33:35 +0100 Subject: firmware: arm_scmi: Simplify spinlocks in virtio transport Remove unneeded nested irqsave/irqrestore spinlocks. Add also a few descriptive comments to explain better the system behaviour at shutdown time. Link: https://lore.kernel.org/r/20210916103336.7243-2-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" Cc: Sudeep Holla Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/virtio.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c index 8941bb40f2df..f3a1ef9bb2a6 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/virtio.c @@ -110,18 +110,16 @@ static void scmi_finalize_message(struct scmi_vio_channel *vioch, if (vioch->is_rx) { scmi_vio_feed_vq_rx(vioch, msg); } else { - unsigned long flags; - - spin_lock_irqsave(&vioch->lock, flags); + /* Here IRQs are assumed to be already disabled by the caller */ + spin_lock(&vioch->lock); list_add(&msg->list, &vioch->free_list); - spin_unlock_irqrestore(&vioch->lock, flags); + spin_unlock(&vioch->lock); } } static void scmi_vio_complete_cb(struct virtqueue *vqueue) { unsigned long ready_flags; - unsigned long flags; unsigned int length; struct scmi_vio_channel *vioch; struct scmi_vio_msg *msg; @@ -140,7 +138,8 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue) goto unlock_ready_out; } - spin_lock_irqsave(&vioch->lock, flags); + /* IRQs already disabled here no need to irqsave */ + spin_lock(&vioch->lock); if (cb_enabled) { virtqueue_disable_cb(vqueue); cb_enabled = false; @@ -151,7 +150,7 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue) goto unlock_out; cb_enabled = true; } - spin_unlock_irqrestore(&vioch->lock, flags); + spin_unlock(&vioch->lock); if (msg) { msg->rx_len = length; @@ -161,11 +160,18 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue) scmi_finalize_message(vioch, msg); } + /* + * Release ready_lock and re-enable IRQs between loop iterations + * to allow virtio_chan_free() to possibly kick in and set the + * flag vioch->ready to false even in between processing of + * messages, so as to force outstanding messages to be ignored + * when system is shutting down. + */ spin_unlock_irqrestore(&vioch->ready_lock, ready_flags); } unlock_out: - spin_unlock_irqrestore(&vioch->lock, flags); + spin_unlock(&vioch->lock); unlock_ready_out: spin_unlock_irqrestore(&vioch->ready_lock, ready_flags); } @@ -435,6 +441,13 @@ static int scmi_vio_probe(struct virtio_device *vdev) static void scmi_vio_remove(struct virtio_device *vdev) { + /* + * Once we get here, virtio_chan_free() will have already been called by + * the SCMI core for any existing channel and, as a consequence, all the + * virtio channels will have been already marked NOT ready, causing any + * outstanding message on any vqueue to be ignored by complete_cb: now + * we can just stop processing buffers and destroy the vqueues. + */ vdev->config->reset(vdev); vdev->config->del_vqs(vdev); scmi_vdev = NULL; -- cgit v1.2.3 From bf1acf809d5694a942e113dfca6ef076d3904bb4 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Thu, 16 Sep 2021 11:33:36 +0100 Subject: firmware: arm_scmi: Add proper barriers to scmi virtio device Only one single SCMI Virtio device is currently supported by this driver and it is referenced using a static global variable which is initialized once for all during probing and nullified at virtio device removal. Add proper SMP barriers to protect accesses to such device reference to ensure that the initialzation state of such device is correctly observed by all PEs at any time. Return -EBUSY, instead of -EINVAL, and a descriptive error message if more than one SCMI Virtio device is ever found and probed. Link: https://lore.kernel.org/r/20210916103336.7243-3-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" Cc: Sudeep Holla Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/virtio.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c index f3a1ef9bb2a6..11e8efb71375 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/virtio.c @@ -390,8 +390,11 @@ static int scmi_vio_probe(struct virtio_device *vdev) struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT]; /* Only one SCMI VirtiO device allowed */ - if (scmi_vdev) - return -EINVAL; + if (scmi_vdev) { + dev_err(dev, + "One SCMI Virtio device was already initialized: only one allowed.\n"); + return -EBUSY; + } have_vq_rx = scmi_vio_have_vq_rx(vdev); vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1; @@ -434,7 +437,8 @@ static int scmi_vio_probe(struct virtio_device *vdev) } vdev->priv = channels; - scmi_vdev = vdev; + /* Ensure initialized scmi_vdev is visible */ + smp_store_mb(scmi_vdev, vdev); return 0; } @@ -450,7 +454,8 @@ static void scmi_vio_remove(struct virtio_device *vdev) */ vdev->config->reset(vdev); vdev->config->del_vqs(vdev); - scmi_vdev = NULL; + /* Ensure scmi_vdev is visible as NULL */ + smp_store_mb(scmi_vdev, NULL); } static int scmi_vio_validate(struct virtio_device *vdev) -- cgit v1.2.3 From 590df78bc7d1d0425196a8e11ce6676d7023fb26 Mon Sep 17 00:00:00 2001 From: Wong Vee Khee Date: Tue, 5 Oct 2021 19:50:59 +0800 Subject: net: pcs: xpcs: fix incorrect steps on disable EEE When Energy-Efficient Ethernet(EEE) is disable from the MAC side, we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1 register. Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller --- drivers/net/pcs/pcs-xpcs.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c index a3e806cfa684..7de631f5356f 100644 --- a/drivers/net/pcs/pcs-xpcs.c +++ b/drivers/net/pcs/pcs-xpcs.c @@ -666,6 +666,10 @@ int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable) { int ret; + ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0); + if (ret < 0) + return ret; + if (enable) { /* Enable EEE */ ret = DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN | @@ -673,9 +677,6 @@ int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable) DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL | mult_fact_100ns << DW_VR_MII_EEE_MULT_FACT_100NS_SHIFT; } else { - ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0); - if (ret < 0) - return ret; ret &= ~(DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN | DW_VR_MII_EEE_TX_QUIET_EN | DW_VR_MII_EEE_RX_QUIET_EN | DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL | @@ -690,7 +691,11 @@ int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable) if (ret < 0) return ret; - ret |= DW_VR_MII_EEE_TRN_LPI; + if (enable) + ret |= DW_VR_MII_EEE_TRN_LPI; + else + ret &= ~DW_VR_MII_EEE_TRN_LPI; + return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL1, ret); } EXPORT_SYMBOL_GPL(xpcs_config_eee); -- cgit v1.2.3 From d4aeaed80b0ebb020fadf2073b23462928dbdc17 Mon Sep 17 00:00:00 2001 From: Wong Vee Khee Date: Tue, 5 Oct 2021 19:51:00 +0800 Subject: net: stmmac: trigger PCS EEE to turn off on link down The current implementation enable PCS EEE feature in the event of link up, but PCS EEE feature is not disabled on link down. This patch makes sure PCE EEE feature is disabled on link down. Fixes: 656ed8b015f1 ("net: stmmac: fix EEE init issue when paired with EEE capable PHYs") Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 981ccf47dcea..eb3b7bf771d7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -477,6 +477,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv) stmmac_lpi_entry_timer_config(priv, 0); del_timer_sync(&priv->eee_ctrl_timer); stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer); + if (priv->hw->xpcs) + xpcs_config_eee(priv->hw->xpcs, + priv->plat->mult_fact_100ns, + false); } mutex_unlock(&priv->lock); return false; @@ -1038,7 +1042,7 @@ static void stmmac_mac_link_down(struct phylink_config *config, stmmac_mac_set(priv, priv->ioaddr, false); priv->eee_active = false; priv->tx_lpi_enabled = false; - stmmac_eee_init(priv); + priv->eee_enabled = stmmac_eee_init(priv); stmmac_set_eee_pls(priv, priv->hw, false); if (priv->dma_cap.fpesel) -- cgit v1.2.3 From be4491838359e78e42e88db4ac479e21c5eda1e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Sep 2021 17:17:36 +0100 Subject: gpio: 74x164: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-74x164.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index 05637d585152..4a55cdf089d6 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi) return 0; } +static const struct spi_device_id gen_74x164_spi_ids[] = { + { .name = "74hc595" }, + { .name = "74lvc594" }, + {}, +}; +MODULE_DEVICE_TABLE(spi, gen_74x164_spi_ids); + static const struct of_device_id gen_74x164_dt_ids[] = { { .compatible = "fairchild,74hc595" }, { .compatible = "nxp,74lvc594" }, @@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = { }, .probe = gen_74x164_probe, .remove = gen_74x164_remove, + .id_table = gen_74x164_spi_ids, }; module_spi_driver(gen_74x164_driver); -- cgit v1.2.3 From 55a9968c7e139209a9e93d4ca4321731bea5fc95 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 24 Sep 2021 01:46:40 +0300 Subject: gpio: pca953x: Improve bias setting The commit 15add06841a3 ("gpio: pca953x: add ->set_config implementation") introduced support for bias setting. However this, due to being half-baked, brought potential issues: - the turning bias via disabling makes the pin floating for a while; - once enabled, bias can't be disabled. Fix all these by adding support for bias disabling and move the disabling part under the corresponding conditional. While at it, add support for default setting, since it's cheap to add. Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation") Cc: Thomas Petazzoni Signed-off-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 8ebf369b3ba0..d2fe76f3f34f 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -559,21 +559,21 @@ static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip, mutex_lock(&chip->i2c_lock); - /* Disable pull-up/pull-down */ - ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0); - if (ret) - goto exit; - /* Configure pull-up/pull-down */ if (config == PIN_CONFIG_BIAS_PULL_UP) ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit); else if (config == PIN_CONFIG_BIAS_PULL_DOWN) ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0); + else + ret = 0; if (ret) goto exit; - /* Enable pull-up/pull-down */ - ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit); + /* Disable/Enable pull-up/pull-down */ + if (config == PIN_CONFIG_BIAS_DISABLE) + ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0); + else + ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit); exit: mutex_unlock(&chip->i2c_lock); @@ -587,7 +587,9 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset, switch (pinconf_to_config_param(config)) { case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_DISABLE: return pca953x_gpio_set_pull_up_down(chip, offset, config); default: return -ENOTSUPP; -- cgit v1.2.3 From 6fda593f3082ef1aa783ac13e89f673fd69a2cb6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Oct 2021 15:24:49 +0300 Subject: gpio: mockup: Convert to use software nodes The gpio-mockup driver creates the properties that are shared between platform and GPIO devices. Because of that, the properties may not be removed at the proper point of time without provoking a use-after-free as shown in the following backtrace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120 ... Call Trace: kobject_put+0xdc/0xf0 software_node_notify_remove+0xa8/0xc0 device_del+0x15a/0x3e0 That's why the driver has to manage the lifetime of the software nodes by itself. The problem originates from the old device_add_properties() API, but has been only revealed after the commit bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()"). Hence, it's used as a landmark for backporting. Fixes: bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()") Reported-by: Kent Gibson Tested-by: Kent Gibson Signed-off-by: Andy Shevchenko [Bartosz: tweaked local variable placement] Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mockup.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 0a9d746a0fe0..d26bff29157b 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -476,10 +476,19 @@ static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC]; static void gpio_mockup_unregister_pdevs(void) { + struct platform_device *pdev; + struct fwnode_handle *fwnode; int i; - for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) - platform_device_unregister(gpio_mockup_pdevs[i]); + for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) { + pdev = gpio_mockup_pdevs[i]; + if (!pdev) + continue; + + fwnode = dev_fwnode(&pdev->dev); + platform_device_unregister(pdev); + fwnode_remove_software_node(fwnode); + } } static __init char **gpio_mockup_make_line_names(const char *label, @@ -508,6 +517,7 @@ static int __init gpio_mockup_register_chip(int idx) struct property_entry properties[GPIO_MOCKUP_MAX_PROP]; struct platform_device_info pdevinfo; struct platform_device *pdev; + struct fwnode_handle *fwnode; char **line_names = NULL; char chip_label[32]; int prop = 0, base; @@ -536,13 +546,18 @@ static int __init gpio_mockup_register_chip(int idx) "gpio-line-names", line_names, ngpio); } + fwnode = fwnode_create_software_node(properties, NULL); + if (IS_ERR(fwnode)) + return PTR_ERR(fwnode); + pdevinfo.name = "gpio-mockup"; pdevinfo.id = idx; - pdevinfo.properties = properties; + pdevinfo.fwnode = fwnode; pdev = platform_device_register_full(&pdevinfo); kfree_strarray(line_names, ngpio); if (IS_ERR(pdev)) { + fwnode_remove_software_node(fwnode); pr_err("error registering device"); return PTR_ERR(pdev); } -- cgit v1.2.3 From 95a13ee858c9e426e63c97063677736f74af7163 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Oct 2021 16:55:44 +0300 Subject: hyper-v: Replace uuid.h with types.h There is no user of anything in uuid.h in the hyperv.h. Replace it with more appropriate types.h. Fixes: f081bbb3fd03 ("hyper-v: Remove internal types from UAPI header") Reported-by: Greg Kroah-Hartman Signed-off-by: Andy Shevchenko Reviewed-by: Haiyang Zhang Link: https://lore.kernel.org/r/20211001135544.1823-1-andriy.shevchenko@linux.intel.com Signed-off-by: Wei Liu --- include/uapi/linux/hyperv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h index 6135d92e0d47..daf82a230c0e 100644 --- a/include/uapi/linux/hyperv.h +++ b/include/uapi/linux/hyperv.h @@ -26,7 +26,7 @@ #ifndef _UAPI_HYPERV_H #define _UAPI_HYPERV_H -#include +#include /* * Framework version for util services. -- cgit v1.2.3 From d0c6416bd7091647f6041599f396bfa19ae30368 Mon Sep 17 00:00:00 2001 From: Jiang Wang Date: Mon, 4 Oct 2021 23:25:28 +0000 Subject: unix: Fix an issue in unix_shutdown causing the other end read/write failures Commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") sets unix domain socket peer state to TCP_CLOSE in unix_shutdown. This could happen when the local end is shutdown but the other end is not. Then, the other end will get read or write failures which is not expected. Fix the issue by setting the local state to shutdown. Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Reported-by: Casey Schaufler Suggested-by: Cong Wang Signed-off-by: Jiang Wang Signed-off-by: Daniel Borkmann Tested-by: Casey Schaufler Reviewed-by: Casey Schaufler Acked-by: Song Liu Link: https://lore.kernel.org/bpf/20211004232530.2377085-1-jiang.wang@bytedance.com --- net/unix/af_unix.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f505b89bda6a..915afcae6a12 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2860,6 +2860,9 @@ static int unix_shutdown(struct socket *sock, int mode) unix_state_lock(sk); sk->sk_shutdown |= mode; + if ((sk->sk_type == SOCK_STREAM || sk->sk_type == SOCK_SEQPACKET) && + mode == SHUTDOWN_MASK) + sk->sk_state = TCP_CLOSE; other = unix_peer(sk); if (other) sock_hold(other); @@ -2882,12 +2885,10 @@ static int unix_shutdown(struct socket *sock, int mode) other->sk_shutdown |= peer_mode; unix_state_unlock(other); other->sk_state_change(other); - if (peer_mode == SHUTDOWN_MASK) { + if (peer_mode == SHUTDOWN_MASK) sk_wake_async(other, SOCK_WAKE_WAITD, POLL_HUP); - other->sk_state = TCP_CLOSE; - } else if (peer_mode & RCV_SHUTDOWN) { + else if (peer_mode & RCV_SHUTDOWN) sk_wake_async(other, SOCK_WAKE_WAITD, POLL_IN); - } } if (other) sock_put(other); -- cgit v1.2.3 From dd6dd6e3c791db7fdbc5433ec7e450717aa3a0ce Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Wed, 6 Oct 2021 15:04:15 +0200 Subject: ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This fixes the issue of the internal Microphone not working after booting another OS. When booting a certain another OS this barebone keeps some coeff settings even after a cold shutdown. These coeffs prevent the microphone detection from working in Linux, making the Laptop think that there is always an external microphone plugged-in and therefore preventing the use of the internal one. The relevant indexes and values where gathered by naively diff-ing and reading a working and a non-working coeff dump. Signed-off-by: Werner Sembach Cc: Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0689f43fc7af..73e7a92c3728 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6453,6 +6453,24 @@ static void alc287_fixup_legion_15imhg05_speakers(struct hda_codec *codec, /* for alc285_fixup_ideapad_s740_coef() */ #include "ideapad_s740_helper.c" +static void alc256_fixup_tongfang_reset_persistent_settings(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + /* + * A certain other OS sets these coeffs to different values. On at least one TongFang + * barebone these settings might survive even a cold reboot. So to restore a clean slate the + * values are explicitly reset to default here. Without this, the external microphone is + * always in a plugged-in state, while the internal microphone is always in an unplugged + * state, breaking the ability to use the internal microphone. + */ + alc_write_coef_idx(codec, 0x24, 0x0000); + alc_write_coef_idx(codec, 0x26, 0x0000); + alc_write_coef_idx(codec, 0x29, 0x3000); + alc_write_coef_idx(codec, 0x37, 0xfe05); + alc_write_coef_idx(codec, 0x45, 0x5089); +} + enum { ALC269_FIXUP_GPIO2, ALC269_FIXUP_SONY_VAIO, @@ -6667,7 +6685,8 @@ enum { ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS, ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE, ALC287_FIXUP_YOGA7_14ITL_SPEAKERS, - ALC287_FIXUP_13S_GEN2_SPEAKERS + ALC287_FIXUP_13S_GEN2_SPEAKERS, + ALC256_FIXUP_TONGFANG_RESET_PERSISTENT_SETTINGS, }; static const struct hda_fixup alc269_fixups[] = { @@ -8365,6 +8384,10 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE, }, + [ALC256_FIXUP_TONGFANG_RESET_PERSISTENT_SETTINGS] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc256_fixup_tongfang_reset_persistent_settings, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8796,6 +8819,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */ SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802), SND_PCI_QUIRK(0x1c06, 0x2015, "Lemote A190X", ALC269_FIXUP_LEMOTE_A190X), + SND_PCI_QUIRK(0x1d05, 0x1132, "TongFang PHxTxX1", ALC256_FIXUP_TONGFANG_RESET_PERSISTENT_SETTINGS), SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), -- cgit v1.2.3 From d03477ee10f4bc35d3573cf1823814378ef2dca2 Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Tue, 5 Oct 2021 19:42:19 -0700 Subject: gve: Correct available tx qpl check The qpl_map_size is rounded up to a multiple of sizeof(long), but the number of qpls doesn't have to be. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan Signed-off-by: Jeroen de Borst Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h index 1d3188e8e3b3..92dc18a4bcc4 100644 --- a/drivers/net/ethernet/google/gve/gve.h +++ b/drivers/net/ethernet/google/gve/gve.h @@ -780,7 +780,7 @@ struct gve_queue_page_list *gve_assign_rx_qpl(struct gve_priv *priv) gve_num_tx_qpls(priv)); /* we are out of rx qpls */ - if (id == priv->qpl_cfg.qpl_map_size) + if (id == gve_num_tx_qpls(priv) + gve_num_rx_qpls(priv)) return NULL; set_bit(id, priv->qpl_cfg.qpl_id_map); -- cgit v1.2.3 From 922aa9bcac92b3ab6a423526a8e785b35a60b441 Mon Sep 17 00:00:00 2001 From: Tao Liu Date: Tue, 5 Oct 2021 19:42:20 -0700 Subject: gve: Avoid freeing NULL pointer Prevent possible crashes when cleaning up after unsuccessful initializations. Fixes: 893ce44df5658 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Tao Liu Signed-off-by: Catherine Sully Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 099a2bc5ae67..29c5f994f92e 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -82,6 +82,9 @@ static int gve_alloc_counter_array(struct gve_priv *priv) static void gve_free_counter_array(struct gve_priv *priv) { + if (!priv->counter_array) + return; + dma_free_coherent(&priv->pdev->dev, priv->num_event_counters * sizeof(*priv->counter_array), @@ -142,6 +145,9 @@ static int gve_alloc_stats_report(struct gve_priv *priv) static void gve_free_stats_report(struct gve_priv *priv) { + if (!priv->stats_report) + return; + del_timer_sync(&priv->stats_report_timer); dma_free_coherent(&priv->pdev->dev, priv->stats_report_len, priv->stats_report, priv->stats_report_bus); @@ -370,18 +376,19 @@ static void gve_free_notify_blocks(struct gve_priv *priv) { int i; - if (priv->msix_vectors) { - /* Free the irqs */ - for (i = 0; i < priv->num_ntfy_blks; i++) { - struct gve_notify_block *block = &priv->ntfy_blocks[i]; - int msix_idx = i; + if (!priv->msix_vectors) + return; - irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector, - NULL); - free_irq(priv->msix_vectors[msix_idx].vector, block); - } - free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv); + /* Free the irqs */ + for (i = 0; i < priv->num_ntfy_blks; i++) { + struct gve_notify_block *block = &priv->ntfy_blocks[i]; + int msix_idx = i; + + irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector, + NULL); + free_irq(priv->msix_vectors[msix_idx].vector, block); } + free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv); dma_free_coherent(&priv->pdev->dev, priv->num_ntfy_blks * sizeof(*priv->ntfy_blocks), priv->ntfy_blocks, priv->ntfy_block_bus); -- cgit v1.2.3 From d4b111fda69a01e0a7439d05993f5dad567c93aa Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Tue, 5 Oct 2021 19:42:21 -0700 Subject: gve: Properly handle errors in gve_assign_qpl Ignored errors would result in crash. Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Catherine Sullivan Signed-off-by: Jeroen de Borst Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_rx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/google/gve/gve_rx.c b/drivers/net/ethernet/google/gve/gve_rx.c index bb8261368250..94941d4e4744 100644 --- a/drivers/net/ethernet/google/gve/gve_rx.c +++ b/drivers/net/ethernet/google/gve/gve_rx.c @@ -104,8 +104,14 @@ static int gve_prefill_rx_pages(struct gve_rx_ring *rx) if (!rx->data.page_info) return -ENOMEM; - if (!rx->data.raw_addressing) + if (!rx->data.raw_addressing) { rx->data.qpl = gve_assign_rx_qpl(priv); + if (!rx->data.qpl) { + kvfree(rx->data.page_info); + rx->data.page_info = NULL; + return -ENOMEM; + } + } for (i = 0; i < slots; i++) { if (!rx->data.raw_addressing) { struct page *page = rx->data.qpl->pages[i]; -- cgit v1.2.3 From d34367991933d28bd7331f67a759be9a8c474014 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Oct 2021 14:04:17 -0700 Subject: rtnetlink: fix if_nlmsg_stats_size() under estimation rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure. nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags); But if_nlmsg_stats_size() never considered the needed storage. This bug did not show up because alloc_skb(X) allocates skb with extra tailroom, because of added alignments. This could very well be changed in the future to have deterministic behavior. Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats") Signed-off-by: Eric Dumazet Cc: Roopa Prabhu Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 972c8cb303a5..8ccce85562a1 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -5262,7 +5262,7 @@ nla_put_failure: static size_t if_nlmsg_stats_size(const struct net_device *dev, u32 filter_mask) { - size_t size = 0; + size_t size = NLMSG_ALIGN(sizeof(struct if_stats_msg)); if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_64, 0)) size += nla_total_size_64bit(sizeof(struct rtnl_link_stats64)); -- cgit v1.2.3 From 2f57d4975fa027eabd35fdf23a49f8222ef3abf2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Oct 2021 17:30:30 -0700 Subject: gve: fix gve_get_stats() gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry() returns true. What is needed here is to sample values in temporary variables, and only use them after each loop is ended. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Eric Dumazet Cc: Catherine Sullivan Cc: Sagi Shahar Cc: Jon Olson Cc: Willem de Bruijn Cc: Luigi Rizzo Cc: Jeroen de Borst Cc: Tao Liu Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 29c5f994f92e..1b49e9feacac 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -41,6 +41,7 @@ static void gve_get_stats(struct net_device *dev, struct rtnl_link_stats64 *s) { struct gve_priv *priv = netdev_priv(dev); unsigned int start; + u64 packets, bytes; int ring; if (priv->rx) { @@ -48,10 +49,12 @@ static void gve_get_stats(struct net_device *dev, struct rtnl_link_stats64 *s) do { start = u64_stats_fetch_begin(&priv->rx[ring].statss); - s->rx_packets += priv->rx[ring].rpackets; - s->rx_bytes += priv->rx[ring].rbytes; + packets = priv->rx[ring].rpackets; + bytes = priv->rx[ring].rbytes; } while (u64_stats_fetch_retry(&priv->rx[ring].statss, start)); + s->rx_packets += packets; + s->rx_bytes += bytes; } } if (priv->tx) { @@ -59,10 +62,12 @@ static void gve_get_stats(struct net_device *dev, struct rtnl_link_stats64 *s) do { start = u64_stats_fetch_begin(&priv->tx[ring].statss); - s->tx_packets += priv->tx[ring].pkt_done; - s->tx_bytes += priv->tx[ring].bytes_done; + packets = priv->tx[ring].pkt_done; + bytes = priv->tx[ring].bytes_done; } while (u64_stats_fetch_retry(&priv->tx[ring].statss, start)); + s->tx_packets += packets; + s->tx_bytes += bytes; } } } -- cgit v1.2.3 From 17c37d748f2b122a95b6d0524d410302ff89a2b1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Oct 2021 18:01:38 -0700 Subject: gve: report 64bit tx_bytes counter from gve_handle_report_stats() Each tx queue maintains a 64bit counter for bytes, there is no reason to truncate this to 32bit (or this has not been documented) Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Eric Dumazet Cc: Yangchun Fu Cc: Kuo Zhao Cc: David Awogbemila Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 1b49e9feacac..bf8a4a7c43f7 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -1197,9 +1197,10 @@ static void gve_handle_reset(struct gve_priv *priv) void gve_handle_report_stats(struct gve_priv *priv) { - int idx, stats_idx = 0, tx_bytes; - unsigned int start = 0; struct stats *stats = priv->stats_report->stats; + int idx, stats_idx = 0; + unsigned int start = 0; + u64 tx_bytes; if (!gve_get_report_stats(priv)) return; -- cgit v1.2.3 From 3707428ddabadde4086eb7c592e988f584344857 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Tue, 5 Oct 2021 16:11:05 -0700 Subject: ionic: move filter sync_needed bit set Move the setting of the filter-sync-needed bit to the error case in the filter add routine to be sure we're checking the live filter status rather than a copy of the pre-sync status. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 4 +++- drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c | 3 --- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 381966e8f557..ccf3ffcd3939 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1292,8 +1292,10 @@ int ionic_lif_addr_add(struct ionic_lif *lif, const u8 *addr) if (err && err != -EEXIST) { /* set the state back to NEW so we can try again later */ f = ionic_rx_filter_by_addr(lif, addr); - if (f && f->state == IONIC_FILTER_STATE_SYNCED) + if (f && f->state == IONIC_FILTER_STATE_SYNCED) { f->state = IONIC_FILTER_STATE_NEW; + set_bit(IONIC_LIF_F_FILTER_SYNC_NEEDED, lif->state); + } spin_unlock_bh(&lif->rx_filters.lock); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c index 25ecfcfa1281..69728f9013cb 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c @@ -349,9 +349,6 @@ loop_out: list_for_each_entry_safe(sync_item, spos, &sync_add_list, list) { (void)ionic_lif_addr_add(lif, sync_item->f.cmd.mac.addr); - if (sync_item->f.state != IONIC_FILTER_STATE_SYNCED) - set_bit(IONIC_LIF_F_FILTER_SYNC_NEEDED, lif->state); - list_del(&sync_item->list); devm_kfree(dev, sync_item); } -- cgit v1.2.3 From a50a0595230d38be15183699f7bbc963bf3d127a Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Wed, 6 Oct 2021 08:31:04 +0200 Subject: dt-bindings: net: dsa: marvell: fix compatible in example While the MV88E6390 switch chip exists, one is supposed to use a compatible of "marvell,mv88e6190" for it. Fix this in the given example. Signed-off-by: Marcel Ziswiler Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/marvell.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 30c11fea491b..2363b412410c 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -83,7 +83,7 @@ Example: #interrupt-cells = <2>; switch0: switch@0 { - compatible = "marvell,mv88e6390"; + compatible = "marvell,mv88e6190"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From af467fad78f03a42de8b72190f6a595366b870db Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 24 Sep 2021 11:28:50 +0300 Subject: mmc: sdhci-of-at91: wait for calibration done before proceed Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN bit will be cleared. No commands should be send before calibration is done. Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten") Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Claudiu Beznea Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-2-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-at91.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 5564d7b23e7c..134ba01d3063 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -114,6 +115,7 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); + unsigned int tmp; sdhci_reset(host, mask); @@ -126,6 +128,10 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, SDMMC_CALCR); + + if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN), + 10, 20000, false, host, SDMMC_CALCR)) + dev_err(mmc_dev(host->mmc), "Failed to calibrate\n"); } } -- cgit v1.2.3 From 30d4b990ec644e8bd49ef0a2f074fabc0d189e53 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 24 Sep 2021 11:28:51 +0300 Subject: mmc: sdhci-of-at91: replace while loop with read_poll_timeout Replace while loop with read_poll_timeout(). Signed-off-by: Claudiu Beznea Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-3-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-at91.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 134ba01d3063..d1a1c548c515 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -62,7 +62,6 @@ static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; - unsigned long timeout; host->mmc->actual_clock = 0; @@ -87,16 +86,11 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); /* Wait max 20 ms */ - timeout = 20; - while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) - & SDHCI_CLOCK_INT_STABLE)) { - if (timeout == 0) { - pr_err("%s: Internal clock never stabilised.\n", - mmc_hostname(host->mmc)); - return; - } - timeout--; - mdelay(1); + if (read_poll_timeout(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE), + 1000, 20000, false, host, SDHCI_CLOCK_CONTROL)) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + return; } clk |= SDHCI_CLOCK_CARD_EN; -- cgit v1.2.3 From 8a38a4d51c5055d0201542e5ea3c0cb287f6e223 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 28 Sep 2021 09:36:52 +0200 Subject: mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk The memory at the end of the controller only accepts 32bit read/write accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit (which will be split into two 32bit access) and 8bit leading to incomplete copies to/from this memory when the buffer is not multiple of 8bytes. Add a local copy using writel/readl accesses to make sure we use the right memory access width. The switch to memcpy_to/fromio was done because of 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy worked before since it mainly used 32bit memory acceses. Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt Suggested-by: Martin Blumenstingl Signed-off-by: Neil Armstrong Tested-by: Martin Blumenstingl Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 73 +++++++++++++++++++++++++++++++++-------- 1 file changed, 59 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 3f28eb4d17fe..8f36536cb1b6 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -746,7 +746,7 @@ static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg) writel(start, host->regs + SD_EMMC_START); } -/* local sg copy to buffer version with _to/fromio usage for dram_access_quirk */ +/* local sg copy for dram_access_quirk */ static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data, size_t buflen, bool to_buffer) { @@ -764,21 +764,27 @@ static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data sg_miter_start(&miter, sgl, nents, sg_flags); while ((offset < buflen) && sg_miter_next(&miter)) { - unsigned int len; + unsigned int buf_offset = 0; + unsigned int len, left; + u32 *buf = miter.addr; len = min(miter.length, buflen - offset); + left = len; - /* When dram_access_quirk, the bounce buffer is a iomem mapping */ - if (host->dram_access_quirk) { - if (to_buffer) - memcpy_toio(host->bounce_iomem_buf + offset, miter.addr, len); - else - memcpy_fromio(miter.addr, host->bounce_iomem_buf + offset, len); + if (to_buffer) { + do { + writel(*buf++, host->bounce_iomem_buf + offset + buf_offset); + + buf_offset += 4; + left -= 4; + } while (left); } else { - if (to_buffer) - memcpy(host->bounce_buf + offset, miter.addr, len); - else - memcpy(miter.addr, host->bounce_buf + offset, len); + do { + *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset); + + buf_offset += 4; + left -= 4; + } while (left); } offset += len; @@ -830,7 +836,11 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) if (data->flags & MMC_DATA_WRITE) { cmd_cfg |= CMD_CFG_DATA_WR; WARN_ON(xfer_bytes > host->bounce_buf_size); - meson_mmc_copy_buffer(host, data, xfer_bytes, true); + if (host->dram_access_quirk) + meson_mmc_copy_buffer(host, data, xfer_bytes, true); + else + sg_copy_to_buffer(data->sg, data->sg_len, + host->bounce_buf, xfer_bytes); dma_wmb(); } @@ -849,12 +859,43 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG); } +static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data) +{ + struct scatterlist *sg; + int i; + + /* Reject request if any element offset or size is not 32bit aligned */ + for_each_sg(data->sg, sg, data->sg_len, i) { + if (!IS_ALIGNED(sg->offset, sizeof(u32)) || + !IS_ALIGNED(sg->length, sizeof(u32))) { + dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n", + data->sg->offset, data->sg->length); + return -EINVAL; + } + } + + return 0; +} + static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct meson_host *host = mmc_priv(mmc); bool needs_pre_post_req = mrq->data && !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE); + /* + * The memory at the end of the controller used as bounce buffer for + * the dram_access_quirk only accepts 32bit read/write access, + * check the aligment and length of the data before starting the request. + */ + if (host->dram_access_quirk && mrq->data) { + mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data); + if (mrq->cmd->error) { + mmc_request_done(mmc, mrq); + return; + } + } + if (needs_pre_post_req) { meson_mmc_get_transfer_mode(mmc, mrq); if (!meson_mmc_desc_chain_mode(mrq->data)) @@ -999,7 +1040,11 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) if (meson_mmc_bounce_buf_read(data)) { xfer_bytes = data->blksz * data->blocks; WARN_ON(xfer_bytes > host->bounce_buf_size); - meson_mmc_copy_buffer(host, data, xfer_bytes, false); + if (host->dram_access_quirk) + meson_mmc_copy_buffer(host, data, xfer_bytes, false); + else + sg_copy_from_buffer(data->sg, data->sg_len, + host->bounce_buf, xfer_bytes); } next_cmd = meson_mmc_get_next_command(cmd); -- cgit v1.2.3 From f5c20e4a5f18677e22d8dd2846066251b006a62d Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 6 Oct 2021 14:50:16 +0200 Subject: x86/hyperv: Avoid erroneously sending IPI to 'self' __send_ipi_mask_ex() uses an optimization: when the target CPU mask is equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid converting the specified cpumask to VP_SET. This case was overlooked when 'exclude_self' parameter was added. As the result, a spurious IPI to 'self' can be send. Reported-by: Thomas Gleixner Fixes: dfb5c1e12c28 ("x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself") Signed-off-by: Vitaly Kuznetsov Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20211006125016.941616-1-vkuznets@redhat.com Signed-off-by: Wei Liu --- arch/x86/hyperv/hv_apic.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index 32a1ad356c18..db2d92fb44da 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -122,17 +122,27 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector, ipi_arg->reserved = 0; ipi_arg->vp_set.valid_bank_mask = 0; - if (!cpumask_equal(mask, cpu_present_mask)) { + /* + * Use HV_GENERIC_SET_ALL and avoid converting cpumask to VP_SET + * when the IPI is sent to all currently present CPUs. + */ + if (!cpumask_equal(mask, cpu_present_mask) || exclude_self) { ipi_arg->vp_set.format = HV_GENERIC_SET_SPARSE_4K; if (exclude_self) nr_bank = cpumask_to_vpset_noself(&(ipi_arg->vp_set), mask); else nr_bank = cpumask_to_vpset(&(ipi_arg->vp_set), mask); - } - if (nr_bank < 0) - goto ipi_mask_ex_done; - if (!nr_bank) + + /* + * 'nr_bank <= 0' means some CPUs in cpumask can't be + * represented in VP_SET. Return an error and fall back to + * native (architectural) method of sending IPIs. + */ + if (nr_bank <= 0) + goto ipi_mask_ex_done; + } else { ipi_arg->vp_set.format = HV_GENERIC_SET_ALL; + } status = hv_do_rep_hypercall(HVCALL_SEND_IPI_EX, 0, nr_bank, ipi_arg, NULL); -- cgit v1.2.3 From 64e87d4bd3201bf8a4685083ee4daf5c0d001452 Mon Sep 17 00:00:00 2001 From: James Morse Date: Fri, 17 Sep 2021 16:59:58 +0000 Subject: x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails domain_add_cpu() is called whenever a CPU is brought online. The earlier call to domain_setup_ctrlval() allocates the control value arrays. If domain_setup_mon_state() fails, the control value arrays are not freed. Add the missing kfree() calls. Fixes: 1bd2a63b4f0de ("x86/intel_rdt/mba_sc: Add initialization support") Fixes: edf6fa1c4a951 ("x86/intel_rdt/cqm: Add RMID (Resource monitoring ID) management") Signed-off-by: James Morse Signed-off-by: Borislav Petkov Acked-by: Reinette Chatre Cc: Link: https://lkml.kernel.org/r/20210917165958.28313-1-james.morse@arm.com --- arch/x86/kernel/cpu/resctrl/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c index 4b8813bafffd..b5de5a6c115c 100644 --- a/arch/x86/kernel/cpu/resctrl/core.c +++ b/arch/x86/kernel/cpu/resctrl/core.c @@ -532,6 +532,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r) } if (r->mon_capable && domain_setup_mon_state(r, d)) { + kfree(hw_dom->ctrl_val); + kfree(hw_dom->mbps_val); kfree(d); return; } -- cgit v1.2.3 From d4ebfca26dfab2803c31d68a30225be31b2f9ecf Mon Sep 17 00:00:00 2001 From: James Morse Date: Fri, 17 Sep 2021 16:59:24 +0000 Subject: x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() Commit in Fixes separated the architecture specific and filesystem parts of the resctrl domain structures. This left the error paths in domain_add_cpu() kfree()ing the memory with the wrong type. This will cause a problem if someone adds a new member to struct rdt_hw_domain meaning d_resctrl is no longer the first member. Fixes: 792e0f6f789b ("x86/resctrl: Split struct rdt_domain") Signed-off-by: James Morse Signed-off-by: Borislav Petkov Acked-by: Reinette Chatre Link: https://lkml.kernel.org/r/20210917165924.28254-1-james.morse@arm.com --- arch/x86/kernel/cpu/resctrl/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c index b5de5a6c115c..bb1c3f5f60c8 100644 --- a/arch/x86/kernel/cpu/resctrl/core.c +++ b/arch/x86/kernel/cpu/resctrl/core.c @@ -527,14 +527,14 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r) rdt_domain_reconfigure_cdp(r); if (r->alloc_capable && domain_setup_ctrlval(r, d)) { - kfree(d); + kfree(hw_dom); return; } if (r->mon_capable && domain_setup_mon_state(r, d)) { kfree(hw_dom->ctrl_val); kfree(hw_dom->mbps_val); - kfree(d); + kfree(hw_dom); return; } -- cgit v1.2.3 From 2c861f2b859385e9eaa6e464a8a7435b5a6bf564 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Tue, 3 Aug 2021 13:35:23 +0200 Subject: x86/entry: Correct reference to intended CONFIG_64_BIT Commit in Fixes adds a condition with IS_ENABLED(CONFIG_64_BIT), but the intended config item is called CONFIG_64BIT, as defined in arch/x86/Kconfig. Fortunately, scripts/checkkconfigsymbols.py warns: 64_BIT Referencing files: arch/x86/include/asm/entry-common.h Correct the reference to the intended config symbol. Fixes: 662a0221893a ("x86/entry: Fix AC assertion") Suggested-by: Randy Dunlap Signed-off-by: Lukas Bulwahn Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210803113531.30720-2-lukas.bulwahn@gmail.com --- arch/x86/include/asm/entry-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/entry-common.h b/arch/x86/include/asm/entry-common.h index 14ebd2196569..43184640b579 100644 --- a/arch/x86/include/asm/entry-common.h +++ b/arch/x86/include/asm/entry-common.h @@ -25,7 +25,7 @@ static __always_inline void arch_check_user_regs(struct pt_regs *regs) * For !SMAP hardware we patch out CLAC on entry. */ if (boot_cpu_has(X86_FEATURE_SMAP) || - (IS_ENABLED(CONFIG_64_BIT) && boot_cpu_has(X86_FEATURE_XENPV))) + (IS_ENABLED(CONFIG_64BIT) && boot_cpu_has(X86_FEATURE_XENPV))) mask |= X86_EFLAGS_AC; WARN_ON_ONCE(flags & mask); -- cgit v1.2.3 From 3958b9c34c2729597e182cc606cc43942fd19f7c Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Mon, 4 Oct 2021 00:34:23 +0200 Subject: x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n Commit 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") added a warning if AC is set when in the kernel. Commit 662a0221893a3d ("x86/entry: Fix AC assertion") changed the warning to only fire if the CPU supports SMAP. However, the warning can still trigger on a machine that supports SMAP but where it's disabled in the kernel config and when running the syscall_nt selftest, for example: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:irqentry_enter_from_user_mode ... Call Trace: ? irqentry_enter ? exc_general_protection ? asm_exc_general_protection ? asm_exc_general_protectio IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but even this would not be enough in case SMAP is disabled at boot time with the "nosmap" parameter. To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when !CONFIG_X86_SMAP. Found using entry-fuzz + satrandconfig. [ bp: Massage commit message. ] Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") Fixes: 662a0221893a ("x86/entry: Fix AC assertion") Signed-off-by: Vegard Nossum Signed-off-by: Borislav Petkov Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211003223423.8666-1-vegard.nossum@oracle.com --- arch/x86/kernel/cpu/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 0f8885949e8c..b3410f1ac217 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -326,6 +326,7 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_SMAP cr4_set_bits(X86_CR4_SMAP); #else + clear_cpu_cap(c, X86_FEATURE_SMAP); cr4_clear_bits(X86_CR4_SMAP); #endif } -- cgit v1.2.3 From 4758fd801f919b8b9acad78d2e49a195ec2be46b Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Tue, 3 Aug 2021 13:35:24 +0200 Subject: x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI The refactoring in the commit in Fixes introduced an ifdef CONFIG_OLPC_XO1_5_SCI, however the config symbol is actually called "CONFIG_OLPC_XO15_SCI". Fortunately, ./scripts/checkkconfigsymbols.py warns: OLPC_XO1_5_SCI Referencing files: arch/x86/platform/olpc/olpc.c Correct this ifdef condition to the intended config symbol. Fixes: ec9964b48033 ("Platform: OLPC: Move EC-specific functionality out from x86") Suggested-by: Randy Dunlap Signed-off-by: Lukas Bulwahn Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210803113531.30720-3-lukas.bulwahn@gmail.com --- arch/x86/platform/olpc/olpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index ee2beda590d0..1d4a00e767ec 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -274,7 +274,7 @@ static struct olpc_ec_driver ec_xo1_driver = { static struct olpc_ec_driver ec_xo1_5_driver = { .ec_cmd = olpc_xo1_ec_cmd, -#ifdef CONFIG_OLPC_XO1_5_SCI +#ifdef CONFIG_OLPC_XO15_SCI /* * XO-1.5 EC wakeups are available when olpc-xo15-sci driver is * compiled in -- cgit v1.2.3 From 225bac2dc5d192e55f2c50123ee539b1edf8a411 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Tue, 3 Aug 2021 13:35:25 +0200 Subject: x86/Kconfig: Correct reference to MWINCHIP3D Commit in Fixes intended to exclude the Winchip series and referred to CONFIG_WINCHIP3D, but the config symbol is called CONFIG_MWINCHIP3D. Hence, scripts/checkkconfigsymbols.py warns: WINCHIP3D Referencing files: arch/x86/Kconfig Correct the reference to the intended config symbol. Fixes: 69b8d3fcabdc ("x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group") Suggested-by: Randy Dunlap Signed-off-by: Lukas Bulwahn Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210803113531.30720-4-lukas.bulwahn@gmail.com --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ab83c22d274e..8055da49f1c0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1405,7 +1405,7 @@ config HIGHMEM4G config HIGHMEM64G bool "64GB" - depends on !M486SX && !M486 && !M586 && !M586TSC && !M586MMX && !MGEODE_LX && !MGEODEGX1 && !MCYRIXIII && !MELAN && !MWINCHIPC6 && !WINCHIP3D && !MK6 + depends on !M486SX && !M486 && !M586 && !M586TSC && !M586MMX && !MGEODE_LX && !MGEODEGX1 && !MCYRIXIII && !MELAN && !MWINCHIPC6 && !MWINCHIP3D && !MK6 select X86_PAE help Select this if you have a 32-bit processor and more than 4 -- cgit v1.2.3 From 857b6c6f665cca9828396d9743faf37fd09e9ac3 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Tue, 14 Sep 2021 10:54:42 +0200 Subject: i40e: fix endless loop under rtnl The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc86895 ("i40e: init code and hardware support") Tested-by: Stefan Assmann Signed-off-by: Jiri Benc Reviewed-by: Jesse Brandeburg Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 2f20980dd9a5..b5b984754ec9 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -10113,7 +10113,7 @@ static int i40e_get_capabilities(struct i40e_pf *pf, if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) { /* retry with a larger buffer */ buf_len = data_size; - } else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) { + } else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK || err) { dev_info(&pf->pdev->dev, "capability discovery failed, err %s aq_err %s\n", i40e_stat_str(&pf->hw, err), -- cgit v1.2.3 From 2e5a20573a926302b233b0c2e1077f5debc7ab2e Mon Sep 17 00:00:00 2001 From: Sylwester Dziedziuch Date: Fri, 24 Sep 2021 11:40:41 +0200 Subject: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. Fixes: c17401a1dd21 ("i40e: use separate state bit for miscellaneous IRQ setup") Reported-by: PJ Waskiewicz Signed-off-by: Sylwester Dziedziuch Signed-off-by: Mateusz Palczewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index b5b984754ec9..e04b540cedc8 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4871,7 +4871,8 @@ static void i40e_clear_interrupt_scheme(struct i40e_pf *pf) { int i; - i40e_free_misc_vector(pf); + if (test_bit(__I40E_MISC_IRQ_REQUESTED, pf->state)) + i40e_free_misc_vector(pf); i40e_put_lump(pf->irq_pile, pf->iwarp_base_vector, I40E_IWARP_IRQ_PILE_ID); -- cgit v1.2.3 From 54ee39439acd9f8b161703c6ad4f4e1835585277 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Tue, 24 Aug 2021 12:06:39 +0200 Subject: iavf: fix double unlock of crit_lock The crit_lock mutex could be unlocked twice as reported here https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html Remove the superfluous unlock. Technically the problem was already present before 5ac49f3c2702 as that commit only replaced the locking primitive, but no functional change. Reported-by: Dan Carpenter Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Fixes: bac8486116b0 ("iavf: Refactor the watchdog state machine") Signed-off-by: Stefan Assmann Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 23762a7ef740..cada4e0e40b4 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1965,7 +1965,6 @@ static void iavf_watchdog_task(struct work_struct *work) } adapter->aq_required = 0; adapter->current_op = VIRTCHNL_OP_UNKNOWN; - mutex_unlock(&adapter->crit_lock); queue_delayed_work(iavf_wq, &adapter->watchdog_task, msecs_to_jiffies(10)); -- cgit v1.2.3 From c20106944eb679fa3ab7e686fe5f6ba30fbc51e5 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 6 Oct 2021 13:20:44 -0400 Subject: NFSD: Keep existing listeners on portlist error If nfsd has existing listening sockets without any processes, then an error returned from svc_create_xprt() for an additional transport will remove those existing listeners. We're seeing this in practice when userspace attempts to create rpcrdma transports without having the rpcrdma modules present before creating nfsd kernel processes. Fix this by checking for existing sockets before calling nfsd_destroy(). Signed-off-by: Benjamin Coddington Signed-off-by: Chuck Lever --- fs/nfsd/nfsctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 09ae1a0873d0..070e5dd03e26 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -793,7 +793,10 @@ out_close: svc_xprt_put(xprt); } out_err: - nfsd_destroy(net); + if (!list_empty(&nn->nfsd_serv->sv_permsocks)) + nn->nfsd_serv->sv_nrthreads--; + else + nfsd_destroy(net); return err; } -- cgit v1.2.3 From 2387033ac0db3235f3fa9d9976aeeeb50349550e Mon Sep 17 00:00:00 2001 From: George Shen Date: Fri, 1 Oct 2021 22:36:09 +0800 Subject: drm/amd/display: Skip override for preferred link settings during link training [Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu Acked-by: Solomon Chiu Signed-off-by: George Shen Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 05eaec03d9f7..6d655e158267 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1306,12 +1306,6 @@ static void override_training_settings( { uint32_t lane; - /* Override link settings */ - if (link->preferred_link_setting.link_rate != LINK_RATE_UNKNOWN) - lt_settings->link_settings.link_rate = link->preferred_link_setting.link_rate; - if (link->preferred_link_setting.lane_count != LANE_COUNT_UNKNOWN) - lt_settings->link_settings.lane_count = link->preferred_link_setting.lane_count; - /* Override link spread */ if (!link->dp_ss_off && overrides->downspread != NULL) lt_settings->link_settings.link_spread = *overrides->downspread ? -- cgit v1.2.3 From a7e397b7c45377e20542146be10231b8afa948d1 Mon Sep 17 00:00:00 2001 From: Nikola Cornij Date: Fri, 1 Oct 2021 22:36:14 +0800 Subject: drm/amd/display: Limit display scaling to up to 4k for DCN 3.1 [why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu Acked-by: Solomon Chiu Signed-off-by: Nikola Cornij Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c index cb50e6eda47e..0006bbac466c 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c @@ -928,7 +928,7 @@ static const struct dc_debug_options debug_defaults_drv = { .disable_dcc = DCC_ENABLE, .vsr_support = true, .performance_trace = false, - .max_downscale_src_width = 7680,/*upto 8K*/ + .max_downscale_src_width = 3840,/*upto 4K*/ .disable_pplib_wm_range = false, .scl_reset_length10 = true, .sanity_checks = false, -- cgit v1.2.3 From 5a1fef027846e7635b9d320b2cc0b416fd11a3be Mon Sep 17 00:00:00 2001 From: Hansen Date: Fri, 1 Oct 2021 22:36:15 +0800 Subject: drm/amd/display: Fix detection of 4 lane for DPALT [Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu Acked-by: Solomon Chiu Signed-off-by: Hansen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../amd/display/dc/dcn31/dcn31_dio_link_encoder.c | 33 +++++++++++++++++++++- .../amd/display/dc/dcn31/dcn31_dio_link_encoder.h | 3 ++ 2 files changed, 35 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c index d1870ac33143..b0892443fbd5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c @@ -63,6 +63,10 @@ #define AUX_REG_WRITE(reg_name, val) \ dm_write_reg(CTX, AUX_REG(reg_name), val) +#ifndef MIN +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) +#endif + void dcn31_link_encoder_set_dio_phy_mux( struct link_encoder *enc, enum encoder_type_select sel, @@ -217,7 +221,7 @@ static const struct link_encoder_funcs dcn31_link_enc_funcs = { .get_dig_frontend = dcn10_get_dig_frontend, .get_dig_mode = dcn10_get_dig_mode, .is_in_alt_mode = dcn31_link_encoder_is_in_alt_mode, - .get_max_link_cap = dcn20_link_encoder_get_max_link_cap, + .get_max_link_cap = dcn31_link_encoder_get_max_link_cap, .set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux, }; @@ -435,3 +439,30 @@ bool dcn31_link_encoder_is_in_alt_mode(struct link_encoder *enc) return is_usb_c_alt_mode; } + +void dcn31_link_encoder_get_max_link_cap(struct link_encoder *enc, + struct dc_link_settings *link_settings) +{ + struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc); + uint32_t is_in_usb_c_dp4_mode = 0; + + dcn10_link_encoder_get_max_link_cap(enc, link_settings); + + /* in usb c dp2 mode, max lane count is 2 */ + if (enc->funcs->is_in_alt_mode && enc->funcs->is_in_alt_mode(enc)) { + if (enc->ctx->asic_id.hw_internal_rev != YELLOW_CARP_B0) { + // [Note] no need to check hw_internal_rev once phy mux selection is ready + REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &is_in_usb_c_dp4_mode); + } else { + if ((enc10->base.transmitter == TRANSMITTER_UNIPHY_A) + || (enc10->base.transmitter == TRANSMITTER_UNIPHY_B) + || (enc10->base.transmitter == TRANSMITTER_UNIPHY_E)) { + REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &is_in_usb_c_dp4_mode); + } else { + REG_GET(RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, &is_in_usb_c_dp4_mode); + } + } + if (!is_in_usb_c_dp4_mode) + link_settings->lane_count = MIN(LANE_COUNT_TWO, link_settings->lane_count); + } +} diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h index bec50e4402ff..3454f1e7c1f1 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h @@ -252,4 +252,7 @@ void dcn31_link_encoder_disable_output( bool dcn31_link_encoder_is_in_alt_mode( struct link_encoder *enc); +void dcn31_link_encoder_get_max_link_cap(struct link_encoder *enc, + struct dc_link_settings *link_settings); + #endif /* __DC_LINK_ENCODER__DCN31_H__ */ -- cgit v1.2.3 From 554afc3b9797511e3245864e32aebeb6abbab1e3 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Wed, 29 Sep 2021 14:27:09 -0700 Subject: gcc-plugins/structleak: add makefile var for disabling structleak KUnit and structleak don't play nice, so add a makefile variable for enabling structleak when it complains. Co-developed-by: Kees Cook Signed-off-by: Kees Cook Signed-off-by: Brendan Higgins Reviewed-by: David Gow Signed-off-by: Shuah Khan --- scripts/Makefile.gcc-plugins | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/Makefile.gcc-plugins b/scripts/Makefile.gcc-plugins index 952e46876329..4aad28480035 100644 --- a/scripts/Makefile.gcc-plugins +++ b/scripts/Makefile.gcc-plugins @@ -19,6 +19,10 @@ gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF) \ += -fplugin-arg-structleak_plugin-byref gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL) \ += -fplugin-arg-structleak_plugin-byref-all +ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK + DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable +endif +export DISABLE_STRUCTLEAK_PLUGIN gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK) \ += -DSTRUCTLEAK_PLUGIN -- cgit v1.2.3 From 2326f3cdba1d105b68cc1295e78f17ae8faa5a76 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Wed, 29 Sep 2021 14:27:10 -0700 Subject: iio/test-format: build kunit tests without structleak plugin MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/iio/test/iio-test-format.c: In function ‘iio_test_iio_format_value_fixedpoint’: ../drivers/iio/test/iio-test-format.c:98:1: warning: the frame size of 2336 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins Suggested-by: Arnd Bergmann Reviewed-by: Kees Cook Acked-by: Jonathan Cameron Signed-off-by: Shuah Khan --- drivers/iio/test/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile index f1099b495301..467519a2027e 100644 --- a/drivers/iio/test/Makefile +++ b/drivers/iio/test/Makefile @@ -5,3 +5,4 @@ # Keep in alphabetical order obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o +CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN) -- cgit v1.2.3 From 6a1e2d93d55b000962b82b9a080006446150b022 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Wed, 29 Sep 2021 14:27:11 -0700 Subject: device property: build kunit tests without structleak plugin The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/base/test/property-entry-test.c:492:1: warning: the frame size of 2832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:322:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:250:1: warning: the frame size of 4976 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:115:1: warning: the frame size of 3280 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins Suggested-by: Arnd Bergmann Reviewed-by: Kees Cook Signed-off-by: Shuah Khan --- drivers/base/test/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/test/Makefile b/drivers/base/test/Makefile index 64b2f3d744d5..7f76fee6f989 100644 --- a/drivers/base/test/Makefile +++ b/drivers/base/test/Makefile @@ -2,4 +2,4 @@ obj-$(CONFIG_TEST_ASYNC_DRIVER_PROBE) += test_async_driver_probe.o obj-$(CONFIG_DRIVER_PE_KUNIT_TEST) += property-entry-test.o -CFLAGS_REMOVE_property-entry-test.o += -fplugin-arg-structleak_plugin-byref -fplugin-arg-structleak_plugin-byref-all +CFLAGS_property-entry-test.o += $(DISABLE_STRUCTLEAK_PLUGIN) -- cgit v1.2.3 From 33d4951e021bb67ebd6bdb01f3d437c0f45b3c0c Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Wed, 29 Sep 2021 14:27:12 -0700 Subject: thunderbolt: build kunit tests without structleak plugin The structleak plugin causes the stack frame size to grow immensely when used with KUnit: drivers/thunderbolt/test.c:1529:1: error: the frame size of 1176 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Turn it off in this file. Linus already split up tests in this file, so this change *should* be redundant now. Signed-off-by: Brendan Higgins Suggested-by: Arnd Bergmann Acked-by: Mika Westerberg Reviewed-by: Kees Cook Signed-off-by: Shuah Khan --- drivers/thunderbolt/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile index da19d7987d00..78fd365893c1 100644 --- a/drivers/thunderbolt/Makefile +++ b/drivers/thunderbolt/Makefile @@ -7,6 +7,7 @@ thunderbolt-objs += usb4_port.o nvm.o retimer.o quirks.o thunderbolt-${CONFIG_ACPI} += acpi.o thunderbolt-$(CONFIG_DEBUG_FS) += debugfs.o thunderbolt-${CONFIG_USB4_KUNIT_TEST} += test.o +CFLAGS_test.o += $(DISABLE_STRUCTLEAK_PLUGIN) thunderbolt_dma_test-${CONFIG_USB4_DMA_TEST} += dma_test.o obj-$(CONFIG_USB4_DMA_TEST) += thunderbolt_dma_test.o -- cgit v1.2.3 From a8cf90332ae3e2b53813a146a99261b6a5e16a73 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 29 Sep 2021 14:27:13 -0700 Subject: bitfield: build kunit tests without structleak plugin The structleak plugin causes the stack frame size to grow immensely: lib/bitfield_kunit.c: In function 'test_bitfields_constants': lib/bitfield_kunit.c:93:1: error: the frame size of 7440 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Turn it off in this file. Signed-off-by: Arnd Bergmann Signed-off-by: Brendan Higgins Reviewed-by: Kees Cook Signed-off-by: Shuah Khan --- lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Makefile b/lib/Makefile index 5efd1b435a37..a841be5244ac 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -351,7 +351,7 @@ obj-$(CONFIG_OBJAGG) += objagg.o obj-$(CONFIG_PLDMFW) += pldmfw/ # KUnit tests -CFLAGS_bitfield_kunit.o := $(call cc-option,-Wframe-larger-than=10240) +CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o -- cgit v1.2.3 From 361b57df62de249dc0b2acbf48823662a5001bcd Mon Sep 17 00:00:00 2001 From: Daniel Latypov Date: Tue, 5 Oct 2021 13:46:32 -0700 Subject: kunit: fix kernel-doc warnings due to mismatched arg names Commit 7122debb4367 ("kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers") added new functions but called last arg `flags`, unlike the existing code that used `gfp`. This only is an issue in test.h, test.c still used `gfp`. But the documentation was copy-pasted with the old names, leading to kernel-doc warnings. Do s/flags/gfp to make the names consistent and fix the warnings. Fixes: 7122debb4367 ("kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers") Reported-by: Randy Dunlap Signed-off-by: Daniel Latypov Reviewed-by: Randy Dunlap Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan --- include/kunit/test.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 24b40e5c160b..018e776a34b9 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -613,7 +613,7 @@ void kunit_remove_resource(struct kunit *test, struct kunit_resource *res); * and is automatically cleaned up after the test case concludes. See &struct * kunit_resource for more information. */ -void *kunit_kmalloc_array(struct kunit *test, size_t n, size_t size, gfp_t flags); +void *kunit_kmalloc_array(struct kunit *test, size_t n, size_t size, gfp_t gfp); /** * kunit_kmalloc() - Like kmalloc() except the allocation is *test managed*. @@ -657,9 +657,9 @@ static inline void *kunit_kzalloc(struct kunit *test, size_t size, gfp_t gfp) * * See kcalloc() and kunit_kmalloc_array() for more information. */ -static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp_t flags) +static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp_t gfp) { - return kunit_kmalloc_array(test, n, size, flags | __GFP_ZERO); + return kunit_kmalloc_array(test, n, size, gfp | __GFP_ZERO); } void kunit_cleanup(struct kunit *test); -- cgit v1.2.3 From b46179d6bb3182c020f2bf9bb4df6ba5463b0495 Mon Sep 17 00:00:00 2001 From: Michael Forney Date: Sat, 8 May 2021 17:01:02 -0700 Subject: objtool: Check for gelf_update_rel[a] failures Otherwise, if these fail we end up with garbage data in the .rela.orc_unwind_ip section, leading to errors like ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip' Signed-off-by: Michael Forney Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20210509000103.11008-1-mforney@mforney.org --- tools/objtool/elf.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index b18f0055b50b..d1d4491e9cf5 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -1001,7 +1001,10 @@ static int elf_rebuild_rel_reloc_section(struct section *sec, int nr) list_for_each_entry(reloc, &sec->reloc_list, list) { reloc->rel.r_offset = reloc->offset; reloc->rel.r_info = GELF_R_INFO(reloc->sym->idx, reloc->type); - gelf_update_rel(sec->data, idx, &reloc->rel); + if (!gelf_update_rel(sec->data, idx, &reloc->rel)) { + WARN_ELF("gelf_update_rel"); + return -1; + } idx++; } @@ -1033,7 +1036,10 @@ static int elf_rebuild_rela_reloc_section(struct section *sec, int nr) reloc->rela.r_offset = reloc->offset; reloc->rela.r_addend = reloc->addend; reloc->rela.r_info = GELF_R_INFO(reloc->sym->idx, reloc->type); - gelf_update_rela(sec->data, idx, &reloc->rela); + if (!gelf_update_rela(sec->data, idx, &reloc->rela)) { + WARN_ELF("gelf_update_rela"); + return -1; + } idx++; } -- cgit v1.2.3 From 86e1e054e0d2105cf32b0266cf1a64e6c26424f7 Mon Sep 17 00:00:00 2001 From: Michael Forney Date: Sat, 8 May 2021 17:01:03 -0700 Subject: objtool: Update section header before relocations The libelf implementation from elftoolchain has a safety check in gelf_update_rel[a] to check that the data corresponds to a section that has type SHT_REL[A] [0]. If the relocation is updated before the section header is updated with the proper type, this check fails. To fix this, update the section header first, before the relocations. Previously, the section size was calculated in elf_rebuild_reloc_section by counting the number of entries in the reloc_list. However, we now need the size during elf_write so instead keep a running total and add to it for every new relocation. [0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/ Signed-off-by: Michael Forney Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20210509000103.11008-2-mforney@mforney.org --- tools/objtool/elf.c | 46 +++++++++++++++++----------------------------- 1 file changed, 17 insertions(+), 29 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index d1d4491e9cf5..fee03b744a6e 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -508,6 +508,7 @@ int elf_add_reloc(struct elf *elf, struct section *sec, unsigned long offset, list_add_tail(&reloc->list, &sec->reloc->reloc_list); elf_hash_add(reloc, &reloc->hash, reloc_hash(reloc)); + sec->reloc->sh.sh_size += sec->reloc->sh.sh_entsize; sec->reloc->changed = true; return 0; @@ -977,26 +978,23 @@ static struct section *elf_create_reloc_section(struct elf *elf, } } -static int elf_rebuild_rel_reloc_section(struct section *sec, int nr) +static int elf_rebuild_rel_reloc_section(struct section *sec) { struct reloc *reloc; - int idx = 0, size; + int idx = 0; void *buf; /* Allocate a buffer for relocations */ - size = nr * sizeof(GElf_Rel); - buf = malloc(size); + buf = malloc(sec->sh.sh_size); if (!buf) { perror("malloc"); return -1; } sec->data->d_buf = buf; - sec->data->d_size = size; + sec->data->d_size = sec->sh.sh_size; sec->data->d_type = ELF_T_REL; - sec->sh.sh_size = size; - idx = 0; list_for_each_entry(reloc, &sec->reloc_list, list) { reloc->rel.r_offset = reloc->offset; @@ -1011,26 +1009,23 @@ static int elf_rebuild_rel_reloc_section(struct section *sec, int nr) return 0; } -static int elf_rebuild_rela_reloc_section(struct section *sec, int nr) +static int elf_rebuild_rela_reloc_section(struct section *sec) { struct reloc *reloc; - int idx = 0, size; + int idx = 0; void *buf; /* Allocate a buffer for relocations with addends */ - size = nr * sizeof(GElf_Rela); - buf = malloc(size); + buf = malloc(sec->sh.sh_size); if (!buf) { perror("malloc"); return -1; } sec->data->d_buf = buf; - sec->data->d_size = size; + sec->data->d_size = sec->sh.sh_size; sec->data->d_type = ELF_T_RELA; - sec->sh.sh_size = size; - idx = 0; list_for_each_entry(reloc, &sec->reloc_list, list) { reloc->rela.r_offset = reloc->offset; @@ -1048,16 +1043,9 @@ static int elf_rebuild_rela_reloc_section(struct section *sec, int nr) static int elf_rebuild_reloc_section(struct elf *elf, struct section *sec) { - struct reloc *reloc; - int nr; - - nr = 0; - list_for_each_entry(reloc, &sec->reloc_list, list) - nr++; - switch (sec->sh.sh_type) { - case SHT_REL: return elf_rebuild_rel_reloc_section(sec, nr); - case SHT_RELA: return elf_rebuild_rela_reloc_section(sec, nr); + case SHT_REL: return elf_rebuild_rel_reloc_section(sec); + case SHT_RELA: return elf_rebuild_rela_reloc_section(sec); default: return -1; } } @@ -1117,12 +1105,6 @@ int elf_write(struct elf *elf) /* Update changed relocation sections and section headers: */ list_for_each_entry(sec, &elf->sections, list) { if (sec->changed) { - if (sec->base && - elf_rebuild_reloc_section(elf, sec)) { - WARN("elf_rebuild_reloc_section"); - return -1; - } - s = elf_getscn(elf->elf, sec->idx); if (!s) { WARN_ELF("elf_getscn"); @@ -1133,6 +1115,12 @@ int elf_write(struct elf *elf) return -1; } + if (sec->base && + elf_rebuild_reloc_section(elf, sec)) { + WARN("elf_rebuild_reloc_section"); + return -1; + } + sec->changed = false; elf->changed = true; } -- cgit v1.2.3 From c0f1886de7e173865f1a0fa7680a1c07954a987f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 6 Oct 2021 16:19:40 +0200 Subject: ALSA: hda: intel: Allow repeatedly probing on codec configuration errors It seems that a few recent AMD systems show the codec configuration errors at the early boot, while loading the driver at a later stage works magically. Although the root cause of the error isn't clear, it's certainly not bad to allow retrying the codec probe in such a case if that helps. This patch adds the capability for retrying the probe upon codec probe errors on the certain AMD platforms. The probe_work is changed to a delayed work, and at the secondary call, it'll jump to the codec probing. Note that, not only adding the re-probing, this includes the behavior changes in the codec configuration function. Namely, snd_hda_codec_configure() won't unregister the codec at errors any longer. Instead, its caller, azx_codec_configure() unregisters the codecs with the probe failures *if* any codec has been successfully configured. If all codec probe failed, it doesn't unregister but let it re-probed -- which is the most case we're seeing and this patch tries to improve. Even if the driver doesn't re-probe or give up, it will go to the "free-all" error path, hence the leftover codecs shall be disabled / deleted in anyway. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801 Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- include/sound/hda_codec.h | 1 + sound/pci/hda/hda_bind.c | 20 +++++++++++--------- sound/pci/hda/hda_codec.c | 1 + sound/pci/hda/hda_controller.c | 24 ++++++++++++++++-------- sound/pci/hda/hda_controller.h | 2 +- sound/pci/hda/hda_intel.c | 29 +++++++++++++++++++++++------ sound/pci/hda/hda_intel.h | 4 +++- 7 files changed, 56 insertions(+), 25 deletions(-) diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h index 01570dbda503..0e45963bb767 100644 --- a/include/sound/hda_codec.h +++ b/include/sound/hda_codec.h @@ -224,6 +224,7 @@ struct hda_codec { #endif /* misc flags */ + unsigned int configured:1; /* codec was configured */ unsigned int in_freeing:1; /* being released */ unsigned int registered:1; /* codec was registered */ unsigned int display_power_control:1; /* needs display power */ diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 2523b23389e9..1c8bffc3eec6 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -298,29 +298,31 @@ int snd_hda_codec_configure(struct hda_codec *codec) { int err; + if (codec->configured) + return 0; + if (is_generic_config(codec)) codec->probe_id = HDA_CODEC_ID_GENERIC; else codec->probe_id = 0; - err = snd_hdac_device_register(&codec->core); - if (err < 0) - return err; + if (!device_is_registered(&codec->core.dev)) { + err = snd_hdac_device_register(&codec->core); + if (err < 0) + return err; + } if (!codec->preset) codec_bind_module(codec); if (!codec->preset) { err = codec_bind_generic(codec); if (err < 0) { - codec_err(codec, "Unable to bind the codec\n"); - goto error; + codec_dbg(codec, "Unable to bind the codec\n"); + return err; } } + codec->configured = 1; return 0; - - error: - snd_hdac_device_unregister(&codec->core); - return err; } EXPORT_SYMBOL_GPL(snd_hda_codec_configure); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a9ebefd60cf6..0c4a337c9fc0 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -791,6 +791,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec) snd_array_free(&codec->nids); remove_conn_list(codec); snd_hdac_regmap_exit(&codec->core); + codec->configured = 0; } EXPORT_SYMBOL_GPL(snd_hda_codec_cleanup_for_unbind); diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 7cd452831fd3..930ae4002a81 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -25,6 +25,7 @@ #include #include #include "hda_controller.h" +#include "hda_local.h" #define CREATE_TRACE_POINTS #include "hda_controller_trace.h" @@ -1248,17 +1249,24 @@ EXPORT_SYMBOL_GPL(azx_probe_codecs); int azx_codec_configure(struct azx *chip) { struct hda_codec *codec, *next; + int success = 0; - /* use _safe version here since snd_hda_codec_configure() deregisters - * the device upon error and deletes itself from the bus list. - */ - list_for_each_codec_safe(codec, next, &chip->bus) { - snd_hda_codec_configure(codec); + list_for_each_codec(codec, &chip->bus) { + if (!snd_hda_codec_configure(codec)) + success++; } - if (!azx_bus(chip)->num_codecs) - return -ENODEV; - return 0; + if (success) { + /* unregister failed codecs if any codec has been probed */ + list_for_each_codec_safe(codec, next, &chip->bus) { + if (!codec->configured) { + codec_err(codec, "Unable to configure, disabling\n"); + snd_hdac_device_unregister(&codec->core); + } + } + } + + return success ? 0 : -ENODEV; } EXPORT_SYMBOL_GPL(azx_codec_configure); diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index 3062f87380b1..f5bf295eb830 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -41,7 +41,7 @@ /* 24 unused */ #define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ #define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ -/* 27 unused */ +#define AZX_DCAPS_RETRY_PROBE (1 << 27) /* retry probe if no codec is configured */ #define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */ #define AZX_DCAPS_NO_MSI64 (1 << 29) /* Stick to 32-bit MSIs */ #define AZX_DCAPS_SEPARATE_STREAM_TAG (1 << 30) /* capture and playback use separate stream tag */ diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 47777439961c..4d22e7adeee8 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -307,7 +307,8 @@ enum { /* quirks for AMD SB */ #define AZX_DCAPS_PRESET_AMD_SB \ (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_AMD_WORKAROUND |\ - AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME) + AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME |\ + AZX_DCAPS_RETRY_PROBE) /* quirks for Nvidia */ #define AZX_DCAPS_PRESET_NVIDIA \ @@ -1723,7 +1724,7 @@ static void azx_check_snoop_available(struct azx *chip) static void azx_probe_work(struct work_struct *work) { - struct hda_intel *hda = container_of(work, struct hda_intel, probe_work); + struct hda_intel *hda = container_of(work, struct hda_intel, probe_work.work); azx_probe_continue(&hda->chip); } @@ -1828,7 +1829,7 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci, } /* continue probing in work context as may trigger request module */ - INIT_WORK(&hda->probe_work, azx_probe_work); + INIT_DELAYED_WORK(&hda->probe_work, azx_probe_work); *rchip = chip; @@ -2142,7 +2143,7 @@ static int azx_probe(struct pci_dev *pci, #endif if (schedule_probe) - schedule_work(&hda->probe_work); + schedule_delayed_work(&hda->probe_work, 0); dev++; if (chip->disabled) @@ -2228,6 +2229,11 @@ static int azx_probe_continue(struct azx *chip) int dev = chip->dev_index; int err; + if (chip->disabled || hda->init_failed) + return -EIO; + if (hda->probe_retry) + goto probe_retry; + to_hda_bus(bus)->bus_probing = 1; hda->probe_continued = 1; @@ -2289,10 +2295,20 @@ static int azx_probe_continue(struct azx *chip) #endif } #endif + + probe_retry: if (bus->codec_mask && !(probe_only[dev] & 1)) { err = azx_codec_configure(chip); - if (err < 0) + if (err) { + if ((chip->driver_caps & AZX_DCAPS_RETRY_PROBE) && + ++hda->probe_retry < 60) { + schedule_delayed_work(&hda->probe_work, + msecs_to_jiffies(1000)); + return 0; /* keep things up */ + } + dev_err(chip->card->dev, "Cannot probe codecs, giving up\n"); goto out_free; + } } err = snd_card_register(chip->card); @@ -2322,6 +2338,7 @@ out_free: display_power(chip, false); complete_all(&hda->probe_wait); to_hda_bus(bus)->bus_probing = 0; + hda->probe_retry = 0; return 0; } @@ -2347,7 +2364,7 @@ static void azx_remove(struct pci_dev *pci) * device during cancel_work_sync() call. */ device_unlock(&pci->dev); - cancel_work_sync(&hda->probe_work); + cancel_delayed_work_sync(&hda->probe_work); device_lock(&pci->dev); snd_card_free(card); diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h index 3fb119f09040..0f39418f9328 100644 --- a/sound/pci/hda/hda_intel.h +++ b/sound/pci/hda/hda_intel.h @@ -14,7 +14,7 @@ struct hda_intel { /* sync probing */ struct completion probe_wait; - struct work_struct probe_work; + struct delayed_work probe_work; /* card list (for power_save trigger) */ struct list_head list; @@ -30,6 +30,8 @@ struct hda_intel { unsigned int freed:1; /* resources already released */ bool need_i915_power:1; /* the hda controller needs i915 power */ + + int probe_retry; /* being probe-retry */ }; #endif -- cgit v1.2.3 From f5a8a07edafed8bede17a95ef8940fe3a57a77d5 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Mon, 4 Oct 2021 12:56:55 +0200 Subject: USB: serial: option: add Telit LE910Cx composition 0x1204 Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6cfb5d33609f..15e47bb40658 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1227,6 +1227,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff), /* Telit LE910Cx (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff), /* Telit LE910Cx (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), -- cgit v1.2.3 From 4549c3ea3160fa8b3f37dfe2f957657bb265eda9 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:20 +0530 Subject: powerpc/lib: Add helper to check if offset is within conditional branch range Add a helper to check if a given offset is within the branch range for a powerpc conditional branch instruction, and update some sites to use the new helper. Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Acked-by: Song Liu Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/include/asm/code-patching.h | 1 + arch/powerpc/lib/code-patching.c | 7 ++++++- arch/powerpc/net/bpf_jit.h | 7 +------ 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index a95f63788c6b..4ba834599c4d 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -23,6 +23,7 @@ #define BRANCH_ABSOLUTE 0x2 bool is_offset_in_branch_range(long offset); +bool is_offset_in_cond_branch_range(long offset); int create_branch(struct ppc_inst *instr, const u32 *addr, unsigned long target, int flags); int create_cond_branch(struct ppc_inst *instr, const u32 *addr, diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index f9a3019e37b4..c5ed98823835 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -228,6 +228,11 @@ bool is_offset_in_branch_range(long offset) return (offset >= -0x2000000 && offset <= 0x1fffffc && !(offset & 0x3)); } +bool is_offset_in_cond_branch_range(long offset) +{ + return offset >= -0x8000 && offset <= 0x7fff && !(offset & 0x3); +} + /* * Helper to check if a given instruction is a conditional branch * Derived from the conditional checks in analyse_instr() @@ -280,7 +285,7 @@ int create_cond_branch(struct ppc_inst *instr, const u32 *addr, offset = offset - (unsigned long)addr; /* Check we can represent the target in the instruction format */ - if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3) + if (!is_offset_in_cond_branch_range(offset)) return 1; /* Mask out the flags and target, so they don't step on each other. */ diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index 99fad093f43e..935ea95b6635 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -78,11 +78,6 @@ #define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0) #endif -static inline bool is_nearbranch(int offset) -{ - return (offset < 32768) && (offset >= -32768); -} - /* * The fly in the ointment of code size changing from pass to pass is * avoided by padding the short branch case with a NOP. If code size differs @@ -91,7 +86,7 @@ static inline bool is_nearbranch(int offset) * state. */ #define PPC_BCC(cond, dest) do { \ - if (is_nearbranch((dest) - (ctx->idx * 4))) { \ + if (is_offset_in_cond_branch_range((long)(dest) - (ctx->idx * 4))) { \ PPC_BCC_SHORT(cond, dest); \ EMIT(PPC_RAW_NOP()); \ } else { \ -- cgit v1.2.3 From 3832ba4e283d7052b783dab8311df7e3590fed93 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:21 +0530 Subject: powerpc/bpf: Validate branch ranges Add checks to ensure that we never emit branch instructions with truncated branch offsets. Suggested-by: Michael Ellerman Signed-off-by: Naveen N. Rao Tested-by: Johan Almbladh Reviewed-by: Christophe Leroy Acked-by: Song Liu Acked-by: Johan Almbladh Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit.h | 26 ++++++++++++++++++++------ arch/powerpc/net/bpf_jit_comp.c | 6 +++++- arch/powerpc/net/bpf_jit_comp32.c | 8 ++++++-- arch/powerpc/net/bpf_jit_comp64.c | 8 ++++++-- 4 files changed, 37 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index 935ea95b6635..7e9b978b768e 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -24,16 +24,30 @@ #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) /* Long jump; (unconditional 'branch') */ -#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \ - (((dest) - (ctx->idx * 4)) & 0x03fffffc)) +#define PPC_JMP(dest) \ + do { \ + long offset = (long)(dest) - (ctx->idx * 4); \ + if (!is_offset_in_branch_range(offset)) { \ + pr_err_ratelimited("Branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \ + return -ERANGE; \ + } \ + EMIT(PPC_INST_BRANCH | (offset & 0x03fffffc)); \ + } while (0) + /* blr; (unconditional 'branch' with link) to absolute address */ #define PPC_BL_ABS(dest) EMIT(PPC_INST_BL | \ (((dest) - (unsigned long)(image + ctx->idx)) & 0x03fffffc)) /* "cond" here covers BO:BI fields. */ -#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \ - (((cond) & 0x3ff) << 16) | \ - (((dest) - (ctx->idx * 4)) & \ - 0xfffc)) +#define PPC_BCC_SHORT(cond, dest) \ + do { \ + long offset = (long)(dest) - (ctx->idx * 4); \ + if (!is_offset_in_cond_branch_range(offset)) { \ + pr_err_ratelimited("Conditional branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \ + return -ERANGE; \ + } \ + EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc)); \ + } while (0) + /* Sign-extended 32-bit immediate load */ #define PPC_LI32(d, i) do { \ if ((int)(uintptr_t)(i) >= -32768 && \ diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 53aefee3fe70..fcbf7a917c56 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -210,7 +210,11 @@ skip_init_ctx: /* Now build the prologue, body code & epilogue for real. */ cgctx.idx = 0; bpf_jit_build_prologue(code_base, &cgctx); - bpf_jit_build_body(fp, code_base, &cgctx, addrs, extra_pass); + if (bpf_jit_build_body(fp, code_base, &cgctx, addrs, extra_pass)) { + bpf_jit_binary_free(bpf_hdr); + fp = org_fp; + goto out_addrs; + } bpf_jit_build_epilogue(code_base, &cgctx); if (bpf_jit_enable > 1) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index beb12cbc8c29..a74d52204f8d 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -200,7 +200,7 @@ void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx, u64 fun } } -static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out) +static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out) { /* * By now, the eBPF program has already setup parameters in r3-r6 @@ -261,7 +261,9 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 bpf_jit_emit_common_epilogue(image, ctx); EMIT(PPC_RAW_BCTR()); + /* out: */ + return 0; } /* Assemble the body code between the prologue & epilogue */ @@ -1090,7 +1092,9 @@ cond_branch: */ case BPF_JMP | BPF_TAIL_CALL: ctx->seen |= SEEN_TAILCALL; - bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]); + ret = bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]); + if (ret < 0) + return ret; break; default: diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index b87a63dba9c8..f06c62089b14 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -206,7 +206,7 @@ void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx, u64 fun EMIT(PPC_RAW_BCTRL()); } -static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out) +static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out) { /* * By now, the eBPF program has already setup parameters in r3, r4 and r5 @@ -267,7 +267,9 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 bpf_jit_emit_common_epilogue(image, ctx); EMIT(PPC_RAW_BCTR()); + /* out: */ + return 0; } /* Assemble the body code between the prologue & epilogue */ @@ -993,7 +995,9 @@ cond_branch: */ case BPF_JMP | BPF_TAIL_CALL: ctx->seen |= SEEN_TAILCALL; - bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]); + ret = bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]); + if (ret < 0) + return ret; break; default: -- cgit v1.2.3 From 8bbc9d822421d9ac8ff9ed26a3713c9afc69d6c8 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:22 +0530 Subject: powerpc/bpf: Fix BPF_MOD when imm == 1 Only ignore the operation if dividing by 1. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Naveen N. Rao Tested-by: Johan Almbladh Reviewed-by: Christophe Leroy Acked-by: Song Liu Acked-by: Johan Almbladh Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp64.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index f06c62089b14..d67f6d62e2e1 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -391,8 +391,14 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */ if (imm == 0) return -EINVAL; - else if (imm == 1) - goto bpf_alu32_trunc; + if (imm == 1) { + if (BPF_OP(code) == BPF_DIV) { + goto bpf_alu32_trunc; + } else { + EMIT(PPC_RAW_LI(dst_reg, 0)); + break; + } + } PPC_LI32(b2p[TMP_REG_1], imm); switch (BPF_CLASS(code)) { -- cgit v1.2.3 From c184accc4a42c7872dc8e8d0fc97a740dc61fe24 Mon Sep 17 00:00:00 2001 From: Tomaz Solc Date: Wed, 6 Oct 2021 14:57:50 +0200 Subject: USB: serial: option: add prod. id for Quectel EG91 Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 15e47bb40658..ac3b0bd82bb9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -246,6 +246,7 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 @@ -1111,6 +1112,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, -- cgit v1.2.3 From 2263eb7370060bdb0013bc14e1a7c9bf33617a55 Mon Sep 17 00:00:00 2001 From: Yu-Tung Chang Date: Thu, 30 Sep 2021 10:11:12 +0800 Subject: USB: serial: option: add Quectel EC200S-CN module support Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ac3b0bd82bb9..a484ff5e4ebf 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -252,6 +252,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define CMOTECH_VENDOR_ID 0x16d8 @@ -1132,6 +1133,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, -- cgit v1.2.3 From 5855c4c1f415ca3ba1046e77c0b3d3dfc96c9025 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:23 +0530 Subject: powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 We aren't handling subtraction involving an immediate value of 0x80000000 properly. Fix the same. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy [mpe: Fold in fix from Naveen to use imm <= 32768] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp64.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index d67f6d62e2e1..2ea1c3f6e287 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -330,18 +330,25 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * EMIT(PPC_RAW_SUB(dst_reg, dst_reg, src_reg)); goto bpf_alu32_trunc; case BPF_ALU | BPF_ADD | BPF_K: /* (u32) dst += (u32) imm */ - case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */ case BPF_ALU64 | BPF_ADD | BPF_K: /* dst += imm */ + if (!imm) { + goto bpf_alu32_trunc; + } else if (imm >= -32768 && imm < 32768) { + EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(imm))); + } else { + PPC_LI32(b2p[TMP_REG_1], imm); + EMIT(PPC_RAW_ADD(dst_reg, dst_reg, b2p[TMP_REG_1])); + } + goto bpf_alu32_trunc; + case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */ case BPF_ALU64 | BPF_SUB | BPF_K: /* dst -= imm */ - if (BPF_OP(code) == BPF_SUB) - imm = -imm; - if (imm) { - if (imm >= -32768 && imm < 32768) - EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(imm))); - else { - PPC_LI32(b2p[TMP_REG_1], imm); - EMIT(PPC_RAW_ADD(dst_reg, dst_reg, b2p[TMP_REG_1])); - } + if (!imm) { + goto bpf_alu32_trunc; + } else if (imm > -32768 && imm <= 32768) { + EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(-imm))); + } else { + PPC_LI32(b2p[TMP_REG_1], imm); + EMIT(PPC_RAW_SUB(dst_reg, dst_reg, b2p[TMP_REG_1])); } goto bpf_alu32_trunc; case BPF_ALU | BPF_MUL | BPF_X: /* (u32) dst *= (u32) src */ -- cgit v1.2.3 From 030905920f32e91a52794937f67434ac0b3ea41a Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:24 +0530 Subject: powerpc/security: Add a helper to query stf_barrier type Add a helper to return the stf_barrier type for the current processor. Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/include/asm/security_features.h | 5 +++++ arch/powerpc/kernel/security.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index 792eefaf230b..27574f218b37 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -39,6 +39,11 @@ static inline bool security_ftr_enabled(u64 feature) return !!(powerpc_security_features & feature); } +#ifdef CONFIG_PPC_BOOK3S_64 +enum stf_barrier_type stf_barrier_type_get(void); +#else +static inline enum stf_barrier_type stf_barrier_type_get(void) { return STF_BARRIER_NONE; } +#endif // Features indicating support for Spectre/Meltdown mitigations diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index 1a998490fe60..15fb5ea1b9ea 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -263,6 +263,11 @@ static int __init handle_no_stf_barrier(char *p) early_param("no_stf_barrier", handle_no_stf_barrier); +enum stf_barrier_type stf_barrier_type_get(void) +{ + return stf_enabled_flush_types; +} + /* This is the generic flag used by other architectures */ static int __init handle_ssbd(char *p) { -- cgit v1.2.3 From b7540d62509453263604a155bf2d5f0ed450cba2 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:25 +0530 Subject: powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC Emit similar instruction sequences to commit a048a07d7f4535 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit") when encountering BPF_NOSPEC. Mitigations are enabled depending on what the firmware advertises. In particular, we do not gate these mitigations based on current settings, just like in x86. Due to this, we don't need to take any action if mitigations are enabled or disabled at runtime. Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit64.h | 8 +++--- arch/powerpc/net/bpf_jit_comp64.c | 55 ++++++++++++++++++++++++++++++++++++--- 2 files changed, 55 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/net/bpf_jit64.h b/arch/powerpc/net/bpf_jit64.h index 7b713edfa7e2..b63b35e45e55 100644 --- a/arch/powerpc/net/bpf_jit64.h +++ b/arch/powerpc/net/bpf_jit64.h @@ -16,18 +16,18 @@ * with our redzone usage. * * [ prev sp ] <------------- - * [ nv gpr save area ] 6*8 | + * [ nv gpr save area ] 5*8 | * [ tail_call_cnt ] 8 | - * [ local_tmp_var ] 8 | + * [ local_tmp_var ] 16 | * fp (r31) --> [ ebpf stack space ] upto 512 | * [ frame header ] 32/112 | * sp (r1) ---> [ stack pointer ] -------------- */ /* for gpr non volatile registers BPG_REG_6 to 10 */ -#define BPF_PPC_STACK_SAVE (6*8) +#define BPF_PPC_STACK_SAVE (5*8) /* for bpf JIT code internal usage */ -#define BPF_PPC_STACK_LOCALS 16 +#define BPF_PPC_STACK_LOCALS 24 /* stack frame excluding BPF stack, ensure this is quadword aligned */ #define BPF_PPC_STACKFRAME (STACK_FRAME_MIN_SIZE + \ BPF_PPC_STACK_LOCALS + BPF_PPC_STACK_SAVE) diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index 2ea1c3f6e287..8b5157ccfeba 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "bpf_jit64.h" @@ -35,9 +36,9 @@ static inline bool bpf_has_stack_frame(struct codegen_context *ctx) * [ prev sp ] <------------- * [ ... ] | * sp (r1) ---> [ stack pointer ] -------------- - * [ nv gpr save area ] 6*8 + * [ nv gpr save area ] 5*8 * [ tail_call_cnt ] 8 - * [ local_tmp_var ] 8 + * [ local_tmp_var ] 16 * [ unused red zone ] 208 bytes protected */ static int bpf_jit_stack_local(struct codegen_context *ctx) @@ -45,12 +46,12 @@ static int bpf_jit_stack_local(struct codegen_context *ctx) if (bpf_has_stack_frame(ctx)) return STACK_FRAME_MIN_SIZE + ctx->stack_size; else - return -(BPF_PPC_STACK_SAVE + 16); + return -(BPF_PPC_STACK_SAVE + 24); } static int bpf_jit_stack_tailcallcnt(struct codegen_context *ctx) { - return bpf_jit_stack_local(ctx) + 8; + return bpf_jit_stack_local(ctx) + 16; } static int bpf_jit_stack_offsetof(struct codegen_context *ctx, int reg) @@ -272,10 +273,33 @@ static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 o return 0; } +/* + * We spill into the redzone always, even if the bpf program has its own stackframe. + * Offsets hardcoded based on BPF_PPC_STACK_SAVE -- see bpf_jit_stack_local() + */ +void bpf_stf_barrier(void); + +asm ( +" .global bpf_stf_barrier ;" +" bpf_stf_barrier: ;" +" std 21,-64(1) ;" +" std 22,-56(1) ;" +" sync ;" +" ld 21,-64(1) ;" +" ld 22,-56(1) ;" +" ori 31,31,0 ;" +" .rept 14 ;" +" b 1f ;" +" 1: ;" +" .endr ;" +" blr ;" +); + /* Assemble the body code between the prologue & epilogue */ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx, u32 *addrs, bool extra_pass) { + enum stf_barrier_type stf_barrier = stf_barrier_type_get(); const struct bpf_insn *insn = fp->insnsi; int flen = fp->len; int i, ret; @@ -646,6 +670,29 @@ emit_clear: * BPF_ST NOSPEC (speculation barrier) */ case BPF_ST | BPF_NOSPEC: + if (!security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) || + !security_ftr_enabled(SEC_FTR_STF_BARRIER)) + break; + + switch (stf_barrier) { + case STF_BARRIER_EIEIO: + EMIT(PPC_RAW_EIEIO() | 0x02000000); + break; + case STF_BARRIER_SYNC_ORI: + EMIT(PPC_RAW_SYNC()); + EMIT(PPC_RAW_LD(b2p[TMP_REG_1], _R13, 0)); + EMIT(PPC_RAW_ORI(_R31, _R31, 0)); + break; + case STF_BARRIER_FALLBACK: + EMIT(PPC_RAW_MFLR(b2p[TMP_REG_1])); + PPC_LI64(12, dereference_kernel_function_descriptor(bpf_stf_barrier)); + EMIT(PPC_RAW_MTCTR(12)); + EMIT(PPC_RAW_BCTRL()); + EMIT(PPC_RAW_MTLR(b2p[TMP_REG_1])); + break; + case STF_BARRIER_NONE: + break; + } break; /* -- cgit v1.2.3 From c9b8da77f22d28348d1f89a6c4d3fec102e9b1c4 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:26 +0530 Subject: powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation Correct the destination register used for ALU32 BPF_ARSH operation. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/6d24c1f9e79b6f61f5135eaf2ea1e8bcd4dac87b.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index a74d52204f8d..519ecb9ab672 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -625,7 +625,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * EMIT(PPC_RAW_LI(dst_reg_h, 0)); break; case BPF_ALU | BPF_ARSH | BPF_X: /* (s32) dst >>= src */ - EMIT(PPC_RAW_SRAW(dst_reg_h, dst_reg, src_reg)); + EMIT(PPC_RAW_SRAW(dst_reg, dst_reg, src_reg)); break; case BPF_ALU64 | BPF_ARSH | BPF_X: /* (s64) dst >>= src */ bpf_set_seen_register(ctx, tmp_reg); -- cgit v1.2.3 From e8278d44443207bb6609c7b064073f353e6f4978 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:27 +0530 Subject: powerpc/bpf ppc32: Fix JMP32_JSET_K 'andi' only takes an unsigned 16-bit value. Correct the imm range used when emitting andi. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/b94489f52831305ec15aca4dd04a3527236be7e8.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index 519ecb9ab672..7c65de9ed4fa 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -1075,7 +1075,7 @@ cond_branch: break; case BPF_JMP32 | BPF_JSET | BPF_K: /* andi does not sign-extend the immediate */ - if (imm >= -32768 && imm < 32768) { + if (imm >= 0 && imm < 32768) { /* PPC_ANDI is _only/always_ dot-form */ EMIT(PPC_RAW_ANDI(_R0, dst_reg, imm)); } else { -- cgit v1.2.3 From 48164fccdff6d5cc11308126c050bd25a329df25 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:28 +0530 Subject: powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END Suppress emitting zero extend instruction for 64-bit BPF_END_FROM_[L|B]E operation. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/b4e3c3546121315a8e2059b19a1bda84971816e4.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index 7c65de9ed4fa..68dc8a8231de 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -1107,7 +1107,7 @@ cond_branch: return -EOPNOTSUPP; } if (BPF_CLASS(code) == BPF_ALU && !fp->aux->verifier_zext && - !insn_is_zext(&insn[i + 1])) + !insn_is_zext(&insn[i + 1]) && !(BPF_OP(code) == BPF_END && imm == 64)) EMIT(PPC_RAW_LI(dst_reg_h, 0)); } -- cgit v1.2.3 From 548b762763b885b81850db676258df47c55dd5f9 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 6 Oct 2021 01:55:29 +0530 Subject: powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000 Special case handling of the smallest 32-bit negative number for BPF_SUB. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7135360a0cdf70adedbccf9863128b8daef18764.1633464148.git.naveen.n.rao@linux.vnet.ibm.com --- arch/powerpc/net/bpf_jit_comp32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index 68dc8a8231de..0da31d41d413 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -357,7 +357,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * PPC_LI32(_R0, imm); EMIT(PPC_RAW_ADDC(dst_reg, dst_reg, _R0)); } - if (imm >= 0) + if (imm >= 0 || (BPF_OP(code) == BPF_SUB && imm == 0x80000000)) EMIT(PPC_RAW_ADDZE(dst_reg_h, dst_reg_h)); else EMIT(PPC_RAW_ADDME(dst_reg_h, dst_reg_h)); -- cgit v1.2.3 From 3e607dc4df180b72a38e75030cb0f94d12808712 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 5 Oct 2021 00:56:38 +1000 Subject: powerpc/64s: fix program check interrupt emergency stack path Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430 GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300 GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006bf04] ___do_page_fault+0x234/0xb10 Call Trace: Instruction dump: 4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000 7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178 ---[ end trace a5dbd1f5ea4ccc51 ]--- Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-2-npiggin@gmail.com --- arch/powerpc/kernel/exceptions-64s.S | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 37859e62a8dc..024d9231f88c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1665,27 +1665,30 @@ EXC_COMMON_BEGIN(program_check_common) */ andi. r10,r12,MSR_PR - bne 2f /* If userspace, go normal path */ + bne .Lnormal_stack /* If userspace, go normal path */ andis. r10,r12,(SRR1_PROGTM)@h - bne 1f /* If TM, emergency */ + bne .Lemergency_stack /* If TM, emergency */ cmpdi r1,-INT_FRAME_SIZE /* check if r1 is in userspace */ - blt 2f /* normal path if not */ + blt .Lnormal_stack /* normal path if not */ /* Use the emergency stack */ -1: andi. r10,r12,MSR_PR /* Set CR0 correctly for label */ +.Lemergency_stack: + andi. r10,r12,MSR_PR /* Set CR0 correctly for label */ /* 3 in EXCEPTION_PROLOG_COMMON */ mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ __ISTACK(program_check)=0 __GEN_COMMON_BODY program_check - b 3f -2: + b .Ldo_program_check + +.Lnormal_stack: __ISTACK(program_check)=1 __GEN_COMMON_BODY program_check -3: + +.Ldo_program_check: addi r3,r1,STACK_FRAME_OVERHEAD bl program_check_exception REST_NVGPRS(r1) /* instruction emulation may change GPRs */ -- cgit v1.2.3 From d0afd44c05f8f4e4c91487c02d43c87a31552462 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 5 Oct 2021 00:56:39 +1000 Subject: powerpc/traps: do not enable irqs in _exception _exception can be called by machine check handlers when the MCE hits user code (e.g., pseries and powernv). This will enable local irqs because, which is a dicey thing to do in NMI or hard irq context. This seemed to worked out okay because a userspace MCE can basically be treated like a synchronous interrupt (after async / imprecise MCEs are filtered out). Since NMI and hard irq handlers have started growing nmi_enter / irq_enter, and more irq state sanity checks, this has started to cause problems (or at least trigger warnings). The Fixes tag to the commit which introduced this rather than try to work out exactly which commit was the first that could possibly cause a problem because that may be difficult to prove. Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com --- arch/powerpc/kernel/traps.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index aac8c0412ff9..e453b666613b 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -340,10 +340,16 @@ static bool exception_common(int signr, struct pt_regs *regs, int code, return false; } - show_signal_msg(signr, regs, code, addr); + /* + * Must not enable interrupts even for user-mode exception, because + * this can be called from machine check, which may be a NMI or IRQ + * which don't like interrupts being enabled. Could check for + * in_hardirq || in_nmi perhaps, but there doesn't seem to be a good + * reason why _exception() should enable irqs for an exception handler, + * the handlers themselves do that directly. + */ - if (arch_irqs_disabled()) - interrupt_cond_local_irq_enable(regs); + show_signal_msg(signr, regs, code, addr); current->thread.trap_nr = code; -- cgit v1.2.3 From ff058a8ada5df0d84e5537cfaf89d06d71501580 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 5 Oct 2021 00:56:40 +1000 Subject: powerpc/64: warn if local irqs are enabled in NMI or hardirq context This can help catch bugs such as the one fixed by the previous change to prevent _exception() from enabling irqs. ppc32 could have a similar warning but it has no good config option to debug this stuff (the test may be overkill to add for production kernels). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-4-npiggin@gmail.com --- arch/powerpc/kernel/irq.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 551b653228c4..c4f1d6b7d992 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,6 +229,9 @@ notrace void arch_local_irq_restore(unsigned long mask) return; } + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(in_nmi() || in_hardirq()); + /* * After the stb, interrupts are unmasked and there are no interrupts * pending replay. The restart sequence makes this atomic with @@ -321,6 +324,9 @@ notrace void arch_local_irq_restore(unsigned long mask) if (mask) return; + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(in_nmi() || in_hardirq()); + /* * From this point onward, we can take interrupts, preempt, * etc... unless we got hard-disabled. We check if an event -- cgit v1.2.3 From 768c47010392ece9766a56479b4e0cf04a536916 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 5 Oct 2021 00:56:41 +1000 Subject: powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG If a NMI hits early in an interrupt handler before the irq soft-mask state is reconciled, that can cause a false-positive BUG with a CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion. Remove that assertion and instead check the case that if regs->msr has EE clear, then regs->softe should be marked as disabled so the irq state looks correct to NMI handlers, the same as how it's fixed up in the case it was implicit soft-masked. This doesn't fix a known problem -- the change that was fixed by commit 4ec5feec1ad02 ("powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled") was the addition of a warning in the soft-nmi watchdog interrupt which can never actually fire when MSR[EE]=0. However it may be important if NMI handlers grow more code, and it's less surprising to anything using 'regs' - (I tripped over this when working in the area). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-5-npiggin@gmail.com --- arch/powerpc/include/asm/interrupt.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h index 6b800d3e2681..b894b7169706 100644 --- a/arch/powerpc/include/asm/interrupt.h +++ b/arch/powerpc/include/asm/interrupt.h @@ -265,13 +265,16 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte local_paca->irq_soft_mask = IRQS_ALL_DISABLED; local_paca->irq_happened |= PACA_IRQ_HARD_DIS; - if (is_implicit_soft_masked(regs)) { - // Adjust regs->softe soft implicit soft-mask, so - // arch_irq_disabled_regs(regs) behaves as expected. + if (!(regs->msr & MSR_EE) || is_implicit_soft_masked(regs)) { + /* + * Adjust regs->softe to be soft-masked if it had not been + * reconcied (e.g., interrupt entry with MSR[EE]=0 but softe + * not yet set disabled), or if it was in an implicit soft + * masked state. This makes arch_irq_disabled_regs(regs) + * behave as expected. + */ regs->softe = IRQS_ALL_DISABLED; } - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); /* Don't do any per-CPU operations until interrupt state is fixed */ -- cgit v1.2.3 From f08fb25bc66986b0952724530a640d9970fa52c1 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 5 Oct 2021 00:56:42 +1000 Subject: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs") Signed-off-by: Nicholas Piggin Tested-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com --- arch/powerpc/include/asm/interrupt.h | 5 ++--- arch/powerpc/kernel/exceptions-64s.S | 8 ++++++-- arch/powerpc/kernel/traps.c | 31 ++++++++++++++++++------------- 3 files changed, 26 insertions(+), 18 deletions(-) diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h index b894b7169706..a1d238255f07 100644 --- a/arch/powerpc/include/asm/interrupt.h +++ b/arch/powerpc/include/asm/interrupt.h @@ -528,10 +528,9 @@ static __always_inline long ____##func(struct pt_regs *regs) /* kernel/traps.c */ DECLARE_INTERRUPT_HANDLER_NMI(system_reset_exception); #ifdef CONFIG_PPC_BOOK3S_64 -DECLARE_INTERRUPT_HANDLER_ASYNC(machine_check_exception); -#else -DECLARE_INTERRUPT_HANDLER_NMI(machine_check_exception); +DECLARE_INTERRUPT_HANDLER_ASYNC(machine_check_exception_async); #endif +DECLARE_INTERRUPT_HANDLER_NMI(machine_check_exception); DECLARE_INTERRUPT_HANDLER(SMIException); DECLARE_INTERRUPT_HANDLER(handle_hmi_exception); DECLARE_INTERRUPT_HANDLER(unknown_exception); diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 024d9231f88c..eaf1f72131a1 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1243,7 +1243,7 @@ EXC_COMMON_BEGIN(machine_check_common) li r10,MSR_RI mtmsrd r10,1 addi r3,r1,STACK_FRAME_OVERHEAD - bl machine_check_exception + bl machine_check_exception_async b interrupt_return_srr @@ -1303,7 +1303,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) subi r12,r12,1 sth r12,PACA_IN_MCE(r13) - /* Invoke machine_check_exception to print MCE event and panic. */ + /* + * Invoke machine_check_exception to print MCE event and panic. + * This is the NMI version of the handler because we are called from + * the early handler which is a true NMI. + */ addi r3,r1,STACK_FRAME_OVERHEAD bl machine_check_exception diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index e453b666613b..11741703d26e 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -796,24 +796,22 @@ void die_mce(const char *str, struct pt_regs *regs, long err) * do_exit() checks for in_interrupt() and panics in that case, so * exit the irq/nmi before calling die. */ - if (IS_ENABLED(CONFIG_PPC_BOOK3S_64)) - irq_exit(); - else + if (in_nmi()) nmi_exit(); + else + irq_exit(); die(str, regs, err); } /* - * BOOK3S_64 does not call this handler as a non-maskable interrupt + * BOOK3S_64 does not usually call this handler as a non-maskable interrupt * (it uses its own early real-mode handler to handle the MCE proper * and then raises irq_work to call this handler when interrupts are - * enabled). + * enabled). The only time when this is not true is if the early handler + * is unrecoverable, then it does call this directly to try to get a + * message out. */ -#ifdef CONFIG_PPC_BOOK3S_64 -DEFINE_INTERRUPT_HANDLER_ASYNC(machine_check_exception) -#else -DEFINE_INTERRUPT_HANDLER_NMI(machine_check_exception) -#endif +static void __machine_check_exception(struct pt_regs *regs) { int recover = 0; @@ -847,12 +845,19 @@ bail: /* Must die if the interrupt is not recoverable */ if (regs_is_unrecoverable(regs)) die_mce("Unrecoverable Machine check", regs, SIGBUS); +} #ifdef CONFIG_PPC_BOOK3S_64 - return; -#else - return 0; +DEFINE_INTERRUPT_HANDLER_ASYNC(machine_check_exception_async) +{ + __machine_check_exception(regs); +} #endif +DEFINE_INTERRUPT_HANDLER_NMI(machine_check_exception) +{ + __machine_check_exception(regs); + + return 0; } DEFINE_INTERRUPT_HANDLER(SMIException) /* async? */ -- cgit v1.2.3 From 5a4b0320783a19f877dd595813569b3c25f4ff81 Mon Sep 17 00:00:00 2001 From: Cédric Le Goater Date: Thu, 30 Sep 2021 12:25:35 +0200 Subject: powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The IPR drivers tests for MSI support at probe time with MSI vector 0 and when done, frees the IRQ with free_irq(). This test was introduced by 95fecd90397e ("ipr: add test for MSI interrupt support") as an improvement of commit 5a9ef25b14d3 ("[SCSI] ipr: add MSI support") because a boot failure was reported on a Bimini PowerPC system: https://lore.kernel.org/r/1242926159.3007.5.camel@localhost.localdomain It was finally decided to remove MSI support on Bimini systems in 6eb0ac03899a ("powerpc/maple: Add a quirk to disable MSI for IPR on Bimini"). Linux 5.15-rc1 added MSI domain support to the pseries machine and when free_irq is called() in the driver, msi_domain_deactivate() also is. This resets the MSI table entry of the associate vector by calling __pci_write_msi_msg() with an empty message and breaks any further activation of the same vector. In the case of the IPR driver, it breaks the initialization sequence of the IOA. Introduce an empty irq_write_msi_msg() handler in the MSI domain of the pseries machine to avoid clearing the MSI vector entry. Updating the entry is not strictly necessary since it is initialized by the underlying hypervisor, PowerVM or QEMU/KVM. Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Signed-off-by: Cédric Le Goater Reported-by: Abdul Haleem Tested-by: Mahesh Salgaonkar [mpe: Tweak comment wording and formatting slightly] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210930102535.1047230-1-clg@kaod.org --- arch/powerpc/platforms/pseries/msi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 1b305e411862..8627362f613e 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -507,12 +507,27 @@ static void pseries_msi_unmask(struct irq_data *d) irq_chip_unmask_parent(d); } +static void pseries_msi_write_msg(struct irq_data *data, struct msi_msg *msg) +{ + struct msi_desc *entry = irq_data_get_msi_desc(data); + + /* + * Do not update the MSIx vector table. It's not strictly necessary + * because the table is initialized by the underlying hypervisor, PowerVM + * or QEMU/KVM. However, if the MSIx vector entry is cleared, any further + * activation will fail. This can happen in some drivers (eg. IPR) which + * deactivate an IRQ used for testing MSI support. + */ + entry->msg = *msg; +} + static struct irq_chip pseries_pci_msi_irq_chip = { .name = "pSeries-PCI-MSI", .irq_shutdown = pseries_msi_shutdown, .irq_mask = pseries_msi_mask, .irq_unmask = pseries_msi_unmask, .irq_eoi = irq_chip_eoi_parent, + .irq_write_msi_msg = pseries_msi_write_msg, }; static struct msi_domain_info pseries_msi_domain_info = { -- cgit v1.2.3 From d93f9e23744b7bf11a98b2ddb091d129482ae179 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 15 Sep 2021 16:12:24 +0200 Subject: powerpc/32s: Fix kuap_kernel_restore() At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the value contained in regs->kuap. However, when regs->kuap contains 0xffffffff it means that KUAP was not unlocked so calling kuap_unlock() is unrelevant and results in jeopardising the contents of kernel space segment registers. So check that regs->kuap doesn't contain KUAP_NONE before calling kuap_unlock(). In the meantime it also means that if KUAP has not been correcly locked back at interrupt exit, it must be locked before continuing. This is done by checking the content of current->thread.kuap which was returned by kuap_get_and_assert_locked() Fixes: 16132529cee5 ("powerpc/32s: Rework Kernel Userspace Access Protection") Reported-by: Stan Johnson Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu --- arch/powerpc/include/asm/book3s/32/kup.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h index d4b145b279f6..9f38040f0641 100644 --- a/arch/powerpc/include/asm/book3s/32/kup.h +++ b/arch/powerpc/include/asm/book3s/32/kup.h @@ -136,6 +136,14 @@ static inline void kuap_kernel_restore(struct pt_regs *regs, unsigned long kuap) if (kuap_is_disabled()) return; + if (unlikely(kuap != KUAP_NONE)) { + current->thread.kuap = KUAP_NONE; + kuap_lock(kuap, false); + } + + if (likely(regs->kuap == KUAP_NONE)) + return; + current->thread.kuap = regs->kuap; kuap_unlock(regs->kuap, false); -- cgit v1.2.3 From eb8257a12192f43ffd41bd90932c39dade958042 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Mon, 20 Sep 2021 22:03:26 +0530 Subject: pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init On pseries LPAR when an empty slot is assigned to partition OR in single LPAR mode, kdump kernel crashes during issuing PHB reset. In the kdump scenario, we traverse all PHBs and issue reset using the pe_config_addr of the first child device present under each PHB. However the code assumes that none of the PHB slots can be empty and uses list_first_entry() to get the first child device under the PHB. Since list_first_entry() expects the list to be non-empty, it returns an invalid pci_dn entry and ends up accessing NULL phb pointer under pci_dn->phb causing kdump kernel crash. This patch fixes the below kdump kernel crash by skipping empty slots: audit: initializing netlink subsys (disabled) thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' cpuidle: using governor menu pstore: Registered nvram as persistent store backend Issue PHB reset ... audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1 BUG: Kernel NULL pointer dereference on read at 0x00000268 Faulting instruction address: 0xc000000008101fb0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1 NIP: c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70 REGS: c00000001161b840 TRAP: 0300 Not tainted (5.14.0) MSR: 8000000002009033 CR: 28000224 XER: 20040002 CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0 ... NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0 LR __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350 Call Trace: 0xc00000001161bb80 (unreliable) __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350 do_one_initcall+0x60/0x2d0 kernel_init_freeable+0x350/0x3f8 kernel_init+0x3c/0x17c ret_from_kernel_thread+0x5c/0x64 Fixes: 5a090f7c363fd ("powerpc/pseries: PCIE PHB reset") Signed-off-by: Mahesh Salgaonkar [mpe: Tweak wording and trim oops] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter --- arch/powerpc/platforms/pseries/eeh_pseries.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index bc15200852b7..09fafcf2d3a0 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -867,6 +867,10 @@ static int __init eeh_pseries_init(void) if (is_kdump_kernel() || reset_devices) { pr_info("Issue PHB reset ...\n"); list_for_each_entry(phb, &hose_list, list_node) { + // Skip if the slot is empty + if (list_empty(&PCI_DN(phb->dn)->child_list)) + continue; + pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list); config_addr = pseries_eeh_get_pe_config_addr(pdn); -- cgit v1.2.3 From 11c52d250b34a0862edc29db03fbec23b30db6da Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Thu, 7 Oct 2021 14:25:01 +0200 Subject: USB: serial: qcserial: add EM9191 QDL support When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 83da8236e3c8..c18bf8164bc2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ + {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ -- cgit v1.2.3 From 424b650f35c77defbb3cbd6e5221d3697af42250 Mon Sep 17 00:00:00 2001 From: Jackie Liu Date: Wed, 22 Sep 2021 10:51:22 +0800 Subject: tracing: Fix missing osnoise tracer on max_latency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The compiler warns when the data are actually unused: kernel/trace/trace.c:1712:13: error: ‘trace_create_maxlat_file’ defined but not used [-Werror=unused-function] 1712 | static void trace_create_maxlat_file(struct trace_array *tr, | ^~~~~~~~~~~~~~~~~~~~~~~~ [Why] CONFIG_HWLAT_TRACER=n, CONFIG_TRACER_MAX_TRACE=n, CONFIG_OSNOISE_TRACER=y gcc report warns. [How] Now trace_create_maxlat_file will only take effect when CONFIG_HWLAT_TRACER=y or CONFIG_TRACER_MAX_TRACE=y. In fact, after adding osnoise trace, it also needs to take effect. Link: https://lore.kernel.org/all/c1d9e328-ad7c-920b-6c24-9e1598a6421c@infradead.org/ Link: https://lkml.kernel.org/r/20210922025122.3268022-1-liu.yun@linux.dev Fixes: bce29ac9ce0b ("trace: Add osnoise tracer") Cc: Daniel Bristot de Oliveira Suggested-by: Steven Rostedt Reviewed-by: Daniel Bristot de Oliveira Tested-by: Randy Dunlap # build-tested Signed-off-by: Jackie Liu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 7896d30d90f7..bc677cd64224 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1744,16 +1744,15 @@ void latency_fsnotify(struct trace_array *tr) irq_work_queue(&tr->fsnotify_irqwork); } -/* - * (defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER)) && \ - * defined(CONFIG_FSNOTIFY) - */ -#else +#elif defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) \ + || defined(CONFIG_OSNOISE_TRACER) #define trace_create_maxlat_file(tr, d_tracer) \ trace_create_file("tracing_max_latency", 0644, d_tracer, \ &tr->max_latency, &tracing_max_lat_fops) +#else +#define trace_create_maxlat_file(tr, d_tracer) do { } while (0) #endif #ifdef CONFIG_TRACER_MAX_TRACE @@ -9473,9 +9472,7 @@ init_tracer_tracefs(struct trace_array *tr, struct dentry *d_tracer) create_trace_options_dir(tr); -#if defined(CONFIG_TRACER_MAX_TRACE) || defined(CONFIG_HWLAT_TRACER) trace_create_maxlat_file(tr, d_tracer); -#endif if (ftrace_create_function_files(tr, d_tracer)) MEM_FAIL(1, "Could not allocate function filter files"); -- cgit v1.2.3 From 8d6c414cd2fb74aa6812e9bfec6178f8246c4f3a Mon Sep 17 00:00:00 2001 From: Mike Manning Date: Tue, 5 Oct 2021 14:03:42 +0100 Subject: net: prefer socket bound to interface when not in VRF The commit 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF") modified compute_score() so that a device match is always made, not just in the case of an l3mdev skb, then increments the score also for unbound sockets. This ensures that sockets bound to an l3mdev are never selected when not in a VRF. But as unbound and bound sockets are now scored equally, this results in the last opened socket being selected if there are matches in the default VRF for an unbound socket and a socket bound to a dev that is not an l3mdev. However, handling prior to this commit was to always select the bound socket in this case. Reinstate this handling by incrementing the score only for bound sockets. The required isolation due to choosing between an unbound socket and a socket bound to an l3mdev remains in place due to the device match always being made. The same approach is taken for compute_score() for stream sockets. Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF") Fixes: e78190581aff ("net: ensure unbound stream socket to be chosen when not in a VRF") Signed-off-by: Mike Manning Reviewed-by: David Ahern Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/inet_hashtables.c | 4 +++- net/ipv4/udp.c | 3 ++- net/ipv6/inet6_hashtables.c | 2 +- net/ipv6/udp.c | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 80aeaf9e6e16..bfb522e51346 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -242,8 +242,10 @@ static inline int compute_score(struct sock *sk, struct net *net, if (!inet_sk_bound_dev_eq(net, sk->sk_bound_dev_if, dif, sdif)) return -1; + score = sk->sk_bound_dev_if ? 2 : 1; - score = sk->sk_family == PF_INET ? 2 : 1; + if (sk->sk_family == PF_INET) + score++; if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id()) score++; } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 2a7825a5b842..8536b2a7210b 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -390,7 +390,8 @@ static int compute_score(struct sock *sk, struct net *net, dif, sdif); if (!dev_match) return -1; - score += 4; + if (sk->sk_bound_dev_if) + score += 4; if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id()) score++; diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 55c290d55605..67c9114835c8 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -106,7 +106,7 @@ static inline int compute_score(struct sock *sk, struct net *net, if (!inet_sk_bound_dev_eq(net, sk->sk_bound_dev_if, dif, sdif)) return -1; - score = 1; + score = sk->sk_bound_dev_if ? 2 : 1; if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id()) score++; } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index e505bb007e9f..8d785232b479 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -133,7 +133,8 @@ static int compute_score(struct sock *sk, struct net *net, dev_match = udp_sk_bound_dev_eq(net, sk->sk_bound_dev_if, dif, sdif); if (!dev_match) return -1; - score++; + if (sk->sk_bound_dev_if) + score++; if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id()) score++; -- cgit v1.2.3 From db0767b8a6e620b99459d2e688c1983c2e5add0d Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Oct 2021 19:20:19 +0530 Subject: ASoC: wcd938x: Fix jack detection issue This patch is to fix audio 3.5mm jack detection failure on wcd938x codec based target. Fixes: bcee7ed09b8e (ASoC: codecs: wcd938x: add Multi Button Headset Control support) Signed-off-by: Venkata Prasad Potturu Signed-off-by: Srinivasa Rao Mandadapu Reviewed-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/1633614619-27026-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown --- sound/soc/codecs/wcd938x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c index f0daf8defcf1..52de7d14b139 100644 --- a/sound/soc/codecs/wcd938x.c +++ b/sound/soc/codecs/wcd938x.c @@ -4144,10 +4144,10 @@ static int wcd938x_codec_set_jack(struct snd_soc_component *comp, { struct wcd938x_priv *wcd = dev_get_drvdata(comp->dev); - if (!jack) + if (jack) return wcd_mbhc_start(wcd->wcd_mbhc, &wcd->mbhc_cfg, jack); - - wcd_mbhc_stop(wcd->wcd_mbhc); + else + wcd_mbhc_stop(wcd->wcd_mbhc); return 0; } -- cgit v1.2.3 From 2577b868a48ef3601116908738efbe570451e605 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Oct 2021 18:04:25 +0300 Subject: ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20211006150428.16434-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 055248f104b2..b1f9c9cb3355 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -456,12 +456,12 @@ static const struct dmi_system_id byt_cht_es8316_quirk_table[] = { static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; static const char * const mic_name[] = { "in1", "in2" }; + struct snd_soc_acpi_mach *mach = dev_get_platdata(dev); struct property_entry props[MAX_NO_PROPS] = {}; struct byt_cht_es8316_private *priv; const struct dmi_system_id *dmi_id; - struct device *dev = &pdev->dev; - struct snd_soc_acpi_mach *mach; struct fwnode_handle *fwnode; const char *platform_name; struct acpi_device *adev; @@ -476,7 +476,6 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - mach = dev->platform_data; /* fix index of codec dai */ for (i = 0; i < ARRAY_SIZE(byt_cht_es8316_dais); i++) { if (!strcmp(byt_cht_es8316_dais[i].codecs->name, -- cgit v1.2.3 From 6f32c521061b704c0198be3ba9834f5a64ea5605 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Oct 2021 18:04:26 +0300 Subject: ASoC: Intel: bytcht_es8316: Use temporary variable for struct device Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211006150428.16434-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index b1f9c9cb3355..efd71e6e42b3 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -493,7 +493,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) put_device(&adev->dev); byt_cht_es8316_dais[dai_index].codecs->name = codec_name; } else { - dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); + dev_err(dev, "Error cannot find '%s' dev\n", mach->id); return -ENXIO; } @@ -596,7 +596,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) byt_cht_es8316_card.long_name = long_name; #endif - sof_parent = snd_soc_acpi_sof_parent(&pdev->dev); + sof_parent = snd_soc_acpi_sof_parent(dev); /* set card and driver name */ if (sof_parent) { -- cgit v1.2.3 From 10f4a96543b744c8cc7ef8b0799af21d911dd37d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Oct 2021 18:04:27 +0300 Subject: ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() First of all, replace indexed API by plain one since we have index 0. Second, switch to optional variant and drop duplicated code. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211006150428.16434-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index efd71e6e42b3..421a04d96d84 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -566,16 +566,12 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios); priv->speaker_en_gpio = - gpiod_get_index(codec_dev, "speaker-enable", 0, - /* see comment in byt_cht_es8316_resume */ - GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); - + gpiod_get_optional(codec_dev, "speaker-enable", + /* see comment in byt_cht_es8316_resume() */ + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(priv->speaker_en_gpio)) { ret = PTR_ERR(priv->speaker_en_gpio); switch (ret) { - case -ENOENT: - priv->speaker_en_gpio = NULL; - break; default: dev_err(dev, "get speaker GPIO failed: %d\n", ret); fallthrough; -- cgit v1.2.3 From c25d4546ca452b2e8c03bc735e4c65bc6dd751dd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 6 Oct 2021 18:04:28 +0300 Subject: ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211006150428.16434-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 421a04d96d84..4d313d0d0f23 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -532,11 +532,8 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) /* get the clock */ priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3"); - if (IS_ERR(priv->mclk)) { - ret = PTR_ERR(priv->mclk); - dev_err(dev, "clk_get pmc_plt_clk_3 failed: %d\n", ret); - return ret; - } + if (IS_ERR(priv->mclk)) + return dev_err_probe(dev, PTR_ERR(priv->mclk), "clk_get pmc_plt_clk_3 failed\n"); /* get speaker enable GPIO */ codec_dev = acpi_get_first_physical_node(adev); @@ -570,14 +567,9 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) /* see comment in byt_cht_es8316_resume() */ GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(priv->speaker_en_gpio)) { - ret = PTR_ERR(priv->speaker_en_gpio); - switch (ret) { - default: - dev_err(dev, "get speaker GPIO failed: %d\n", ret); - fallthrough; - case -EPROBE_DEFER: - goto err_put_codec; - } + ret = dev_err_probe(dev, PTR_ERR(priv->speaker_en_gpio), + "get speaker GPIO failed\n"); + goto err_put_codec; } snprintf(components_string, sizeof(components_string), -- cgit v1.2.3 From 5af82c81b2c49cfb1cad84d9eb6eab0e3d1c4842 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 6 Oct 2021 16:17:12 +0200 Subject: ASoC: DAPM: Fix missing kctl change notifications The put callback of a kcontrol is supposed to return 1 when the value is changed, and this will be notified to user-space. However, some DAPM kcontrols always return 0 (except for errors), hence the user-space misses the update of a control value. This patch corrects the behavior by properly returning 1 when the value gets updated. Reported-and-tested-by: Hans de Goede Cc: Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7b67f1e19ae9..59d07648a7e7 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2561,6 +2561,7 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm, const char *pin, int status) { struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true); + int ret = 0; dapm_assert_locked(dapm); @@ -2573,13 +2574,14 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm, dapm_mark_dirty(w, "pin configuration"); dapm_widget_invalidate_input_paths(w); dapm_widget_invalidate_output_paths(w); + ret = 1; } w->connected = status; if (status == 0) w->force = 0; - return 0; + return ret; } /** @@ -3583,14 +3585,15 @@ int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol, { struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); const char *pin = (const char *)kcontrol->private_value; + int ret; if (ucontrol->value.integer.value[0]) - snd_soc_dapm_enable_pin(&card->dapm, pin); + ret = snd_soc_dapm_enable_pin(&card->dapm, pin); else - snd_soc_dapm_disable_pin(&card->dapm, pin); + ret = snd_soc_dapm_disable_pin(&card->dapm, pin); snd_soc_dapm_sync(&card->dapm); - return 0; + return ret; } EXPORT_SYMBOL_GPL(snd_soc_dapm_put_pin_switch); @@ -4023,7 +4026,7 @@ static int snd_soc_dapm_dai_link_put(struct snd_kcontrol *kcontrol, rtd->params_select = ucontrol->value.enumerated.item[0]; - return 0; + return 1; } static void -- cgit v1.2.3 From 214174d9f56c7f81f4860a26b6b8b961a6b92654 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Oct 2021 19:21:15 +0530 Subject: ASoC: codec: wcd938x: Add irq config support This patch fixes compilation error in wcd98x codec driver. Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Signed-off-by: Venkata Prasad Potturu Signed-off-by: Srinivasa Rao Mandadapu Reviewed-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/1633614675-27122-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 82ee233a269d..216cea04ad70 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1583,6 +1583,7 @@ config SND_SOC_WCD938X_SDW tristate "WCD9380/WCD9385 Codec - SDW" select SND_SOC_WCD938X select SND_SOC_WCD_MBHC + select REGMAP_IRQ depends on SOUNDWIRE select REGMAP_SOUNDWIRE help -- cgit v1.2.3 From 951cd3a0866d29cb9c01ebc1d9c17590e598226e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Sep 2021 09:50:26 +0200 Subject: firmware: include drivers/firmware/Kconfig unconditionally Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson Reviewed-by: Charles Keepax Acked-by: Will Deacon Acked-by: Bjorn Andersson Cc: Mark Brown Cc: Liam Girdwood Cc: Charles Keepax Cc: Simon Trimmer Cc: Michael Ellerman Reviewed-by: Mark Brown Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 2 -- arch/arm64/Kconfig | 2 -- arch/ia64/Kconfig | 2 -- arch/mips/Kconfig | 2 -- arch/parisc/Kconfig | 2 -- arch/riscv/Kconfig | 2 -- arch/x86/Kconfig | 2 -- drivers/Kconfig | 2 ++ 8 files changed, 2 insertions(+), 14 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fc196421b2ce..59baf6c132a7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1989,8 +1989,6 @@ config ARCH_HIBERNATION_POSSIBLE endmenu -source "drivers/firmware/Kconfig" - if CRYPTO source "arch/arm/crypto/Kconfig" endif diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 077f2ec4eeb2..407b4addea36 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1931,8 +1931,6 @@ source "drivers/cpufreq/Kconfig" endmenu -source "drivers/firmware/Kconfig" - source "drivers/acpi/Kconfig" source "arch/arm64/kvm/Kconfig" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 045792cde481..1e33666fa679 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -388,8 +388,6 @@ config CRASH_DUMP help Generate crash dump after being started by kexec. -source "drivers/firmware/Kconfig" - endmenu menu "Power management and ACPI options" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 771ca53af06d..6b8f591c5054 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -3316,8 +3316,6 @@ source "drivers/cpuidle/Kconfig" endmenu -source "drivers/firmware/Kconfig" - source "arch/mips/kvm/Kconfig" source "arch/mips/vdso/Kconfig" diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 4742b6f169b7..27a8b49af11f 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -384,6 +384,4 @@ config KEXEC_FILE endmenu -source "drivers/firmware/Kconfig" - source "drivers/parisc/Kconfig" diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index c3f3fd583e04..8bc71ab143e3 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -561,5 +561,3 @@ menu "Power management options" source "kernel/power/Kconfig" endmenu - -source "drivers/firmware/Kconfig" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4e001bbbb425..4dca39744ee9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2828,8 +2828,6 @@ config HAVE_ATOMIC_IOMAP def_bool y depends on X86_32 -source "drivers/firmware/Kconfig" - source "arch/x86/kvm/Kconfig" source "arch/x86/Kconfig.assembler" diff --git a/drivers/Kconfig b/drivers/Kconfig index 30d2db37cc87..0d399ddaa185 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -17,6 +17,8 @@ source "drivers/bus/Kconfig" source "drivers/connector/Kconfig" +source "drivers/firmware/Kconfig" + source "drivers/gnss/Kconfig" source "drivers/mtd/Kconfig" -- cgit v1.2.3 From 424953cf3c6657f1e67e1a2c5d6e3bb518ea4e9a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Sep 2021 09:50:27 +0200 Subject: qcom_scm: hide Kconfig symbol Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo Acked-by: Alex Elder Signed-off-by: Arnd Bergmann --- drivers/firmware/Kconfig | 5 +-- drivers/gpu/drm/msm/Kconfig | 4 +- drivers/iommu/Kconfig | 3 +- drivers/iommu/arm/arm-smmu/Makefile | 3 +- drivers/iommu/arm/arm-smmu/arm-smmu-impl.c | 3 +- drivers/media/platform/Kconfig | 2 +- drivers/mmc/host/Kconfig | 2 +- drivers/net/ipa/Kconfig | 1 + drivers/net/wireless/ath/ath10k/Kconfig | 2 +- drivers/pinctrl/qcom/Kconfig | 3 +- include/linux/arm-smccc.h | 10 +++++ include/linux/qcom_scm.h | 71 ------------------------------ 12 files changed, 24 insertions(+), 85 deletions(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 220a58cf0a44..cda7d7162cbb 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -203,10 +203,7 @@ config INTEL_STRATIX10_RSU Say Y here if you want Intel RSU support. config QCOM_SCM - tristate "Qcom SCM driver" - depends on ARM || ARM64 - depends on HAVE_ARM_SMCCC - select RESET_CONTROLLER + tristate config QCOM_SCM_DOWNLOAD_MODE_DEFAULT bool "Qualcomm download mode enabled by default" diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig index e9c6af78b1d7..3ddf739a6f9b 100644 --- a/drivers/gpu/drm/msm/Kconfig +++ b/drivers/gpu/drm/msm/Kconfig @@ -17,7 +17,7 @@ config DRM_MSM select DRM_SCHED select SHMEM select TMPFS - select QCOM_SCM if ARCH_QCOM + select QCOM_SCM select WANT_DEV_COREDUMP select SND_SOC_HDMI_CODEC if SND_SOC select SYNC_FILE @@ -55,7 +55,7 @@ config DRM_MSM_GPU_SUDO config DRM_MSM_HDMI_HDCP bool "Enable HDMI HDCP support in MSM DRM driver" - depends on DRM_MSM && QCOM_SCM + depends on DRM_MSM default y help Choose this option to enable HDCP state machine diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 124c41adeca1..c5c71b7ab7e8 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -308,7 +308,6 @@ config APPLE_DART config ARM_SMMU tristate "ARM Ltd. System MMU (SMMU) Support" depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64) - depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y select IOMMU_API select IOMMU_IO_PGTABLE_LPAE select ARM_DMA_USE_IOMMU if ARM @@ -438,7 +437,7 @@ config QCOM_IOMMU # Note: iommu drivers cannot (yet?) be built as modules bool "Qualcomm IOMMU Support" depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64) - depends on QCOM_SCM=y + select QCOM_SCM select IOMMU_API select IOMMU_IO_PGTABLE_LPAE select ARM_DMA_USE_IOMMU diff --git a/drivers/iommu/arm/arm-smmu/Makefile b/drivers/iommu/arm/arm-smmu/Makefile index e240a7bcf310..b0cc01aa20c9 100644 --- a/drivers/iommu/arm/arm-smmu/Makefile +++ b/drivers/iommu/arm/arm-smmu/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o obj-$(CONFIG_ARM_SMMU) += arm_smmu.o -arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-nvidia.o arm-smmu-qcom.o +arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-nvidia.o +arm_smmu-$(CONFIG_ARM_SMMU_QCOM) += arm-smmu-qcom.o diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c b/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c index 9f465e146799..2c25cce38060 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c @@ -215,7 +215,8 @@ struct arm_smmu_device *arm_smmu_impl_init(struct arm_smmu_device *smmu) of_device_is_compatible(np, "nvidia,tegra186-smmu")) return nvidia_smmu_impl_init(smmu); - smmu = qcom_smmu_impl_init(smmu); + if (IS_ENABLED(CONFIG_ARM_SMMU_QCOM)) + smmu = qcom_smmu_impl_init(smmu); if (of_device_is_compatible(np, "marvell,ap806-smmu-500")) smmu->impl = &mrvl_mmu500_impl; diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 157c924686e4..80321e03809a 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -565,7 +565,7 @@ config VIDEO_QCOM_VENUS depends on VIDEO_DEV && VIDEO_V4L2 && QCOM_SMEM depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST select QCOM_MDT_LOADER if ARCH_QCOM - select QCOM_SCM if ARCH_QCOM + select QCOM_SCM select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 71313961cc54..95b3511b0560 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -547,7 +547,7 @@ config MMC_SDHCI_MSM depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS select MMC_CQHCI - select QCOM_SCM if MMC_CRYPTO && ARCH_QCOM + select QCOM_SCM if MMC_CRYPTO help This selects the Secure Digital Host Controller Interface (SDHCI) support present in Qualcomm SOCs. The controller supports diff --git a/drivers/net/ipa/Kconfig b/drivers/net/ipa/Kconfig index 8f99cfa14680..d037682fb7ad 100644 --- a/drivers/net/ipa/Kconfig +++ b/drivers/net/ipa/Kconfig @@ -4,6 +4,7 @@ config QCOM_IPA depends on ARCH_QCOM || COMPILE_TEST depends on QCOM_RPROC_COMMON || (QCOM_RPROC_COMMON=n && COMPILE_TEST) select QCOM_MDT_LOADER if ARCH_QCOM + select QCOM_SCM select QCOM_QMI_HELPERS help Choose Y or M here to include support for the Qualcomm diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index 741289e385d5..ca007b800f75 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -44,7 +44,7 @@ config ATH10K_SNOC tristate "Qualcomm ath10k SNOC support" depends on ATH10K depends on ARCH_QCOM || COMPILE_TEST - depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y + select QCOM_SCM select QCOM_QMI_HELPERS help This module adds support for integrated WCN3990 chip connected diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 32ea2a8ec02b..5ff4207df66e 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -3,7 +3,8 @@ if (ARCH_QCOM || COMPILE_TEST) config PINCTRL_MSM tristate "Qualcomm core pin controller driver" - depends on GPIOLIB && (QCOM_SCM || !QCOM_SCM) #if QCOM_SCM=m this can't be =y + depends on GPIOLIB + select QCOM_SCM select PINMUX select PINCONF select GENERIC_PINCONF diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index 7d1cabe15262..63ccb5252190 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -321,10 +321,20 @@ asmlinkage unsigned long __arm_smccc_sve_check(unsigned long x0); * from register 0 to 3 on return from the SMC instruction. An optional * quirk structure provides vendor specific behavior. */ +#ifdef CONFIG_HAVE_ARM_SMCCC asmlinkage void __arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3, unsigned long a4, unsigned long a5, unsigned long a6, unsigned long a7, struct arm_smccc_res *res, struct arm_smccc_quirk *quirk); +#else +static inline void __arm_smccc_smc(unsigned long a0, unsigned long a1, + unsigned long a2, unsigned long a3, unsigned long a4, + unsigned long a5, unsigned long a6, unsigned long a7, + struct arm_smccc_res *res, struct arm_smccc_quirk *quirk) +{ + *res = (struct arm_smccc_res){}; +} +#endif /** * __arm_smccc_hvc() - make HVC calls diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index c0475d1c9885..81cad9e1e412 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -61,7 +61,6 @@ enum qcom_scm_ice_cipher { #define QCOM_SCM_PERM_RW (QCOM_SCM_PERM_READ | QCOM_SCM_PERM_WRITE) #define QCOM_SCM_PERM_RWX (QCOM_SCM_PERM_RW | QCOM_SCM_PERM_EXEC) -#if IS_ENABLED(CONFIG_QCOM_SCM) extern bool qcom_scm_is_available(void); extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); @@ -115,74 +114,4 @@ extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, extern int qcom_scm_lmh_profile_change(u32 profile_id); extern bool qcom_scm_lmh_dcvsh_available(void); -#else - -#include - -static inline bool qcom_scm_is_available(void) { return false; } - -static inline int qcom_scm_set_cold_boot_addr(void *entry, - const cpumask_t *cpus) { return -ENODEV; } -static inline int qcom_scm_set_warm_boot_addr(void *entry, - const cpumask_t *cpus) { return -ENODEV; } -static inline void qcom_scm_cpu_power_down(u32 flags) {} -static inline u32 qcom_scm_set_remote_state(u32 state,u32 id) - { return -ENODEV; } - -static inline int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, - size_t size) { return -ENODEV; } -static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, - phys_addr_t size) { return -ENODEV; } -static inline int qcom_scm_pas_auth_and_reset(u32 peripheral) - { return -ENODEV; } -static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; } -static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; } - -static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) - { return -ENODEV; } -static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) - { return -ENODEV; } - -static inline bool qcom_scm_restore_sec_cfg_available(void) { return false; } -static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) - { return -ENODEV; } -static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) - { return -ENODEV; } -static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) - { return -ENODEV; } -extern inline int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size, - u32 cp_nonpixel_start, - u32 cp_nonpixel_size) - { return -ENODEV; } -static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, - unsigned int *src, const struct qcom_scm_vmperm *newvm, - unsigned int dest_cnt) { return -ENODEV; } - -static inline bool qcom_scm_ocmem_lock_available(void) { return false; } -static inline int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, - u32 size, u32 mode) { return -ENODEV; } -static inline int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, - u32 offset, u32 size) { return -ENODEV; } - -static inline bool qcom_scm_ice_available(void) { return false; } -static inline int qcom_scm_ice_invalidate_key(u32 index) { return -ENODEV; } -static inline int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size, - enum qcom_scm_ice_cipher cipher, - u32 data_unit_size) { return -ENODEV; } - -static inline bool qcom_scm_hdcp_available(void) { return false; } -static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, - u32 *resp) { return -ENODEV; } - -static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) - { return -ENODEV; } - -static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, - u64 limit_node, u32 node_id, u64 version) - { return -ENODEV; } - -static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; } - -static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; } -#endif #endif -- cgit v1.2.3 From 85f74acf097a63a07f5a7c215db6883e5c35e3ff Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 6 Oct 2021 23:50:31 -0700 Subject: nvme-pci: Fix abort command id The request tag is no longer the only component of the command id. Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b82492cd7503..7fc992a99624 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1330,7 +1330,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) iod->aborted = 1; cmd.abort.opcode = nvme_admin_abort_cmd; - cmd.abort.cid = req->tag; + cmd.abort.cid = nvme_cid(req); cmd.abort.sqid = cpu_to_le16(nvmeq->qid); dev_warn(nvmeq->dev->ctrl.device, -- cgit v1.2.3 From c2e99d47973796c3fafd13079337dcadecd49d8a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 26 Sep 2021 21:55:02 +0900 Subject: ksmbd: check strictly data area in ksmbd_smb2_check_message() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When invalid data offset and data length in request, ksmbd_smb2_check_message check strictly and doesn't allow to process such requests. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Acked-by: Hyunchul Lee Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2misc.c | 98 +++++++++++++++++++++++++---------------------------- 1 file changed, 47 insertions(+), 51 deletions(-) diff --git a/fs/ksmbd/smb2misc.c b/fs/ksmbd/smb2misc.c index 9aa46bb3e10d..9edd9c161b27 100644 --- a/fs/ksmbd/smb2misc.c +++ b/fs/ksmbd/smb2misc.c @@ -80,18 +80,21 @@ static const bool has_smb2_data_area[NUMBER_OF_SMB2_COMMANDS] = { }; /* - * Returns the pointer to the beginning of the data area. Length of the data - * area and the offset to it (from the beginning of the smb are also returned. + * Set length of the data area and the offset to arguments. + * if they are invalid, return error. */ -static char *smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *hdr) +static int smb2_get_data_area_len(unsigned int *off, unsigned int *len, + struct smb2_hdr *hdr) { + int ret = 0; + *off = 0; *len = 0; /* error reqeusts do not have data area */ if (hdr->Status && hdr->Status != STATUS_MORE_PROCESSING_REQUIRED && (((struct smb2_err_rsp *)hdr)->StructureSize) == SMB2_ERROR_STRUCTURE_SIZE2_LE) - return NULL; + return ret; /* * Following commands have data areas so we have to get the location @@ -165,69 +168,60 @@ static char *smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *hdr) case SMB2_IOCTL: *off = le32_to_cpu(((struct smb2_ioctl_req *)hdr)->InputOffset); *len = le32_to_cpu(((struct smb2_ioctl_req *)hdr)->InputCount); - break; default: ksmbd_debug(SMB, "no length check for command\n"); break; } - /* - * Invalid length or offset probably means data area is invalid, but - * we have little choice but to ignore the data area in this case. - */ if (*off > 4096) { - ksmbd_debug(SMB, "offset %d too large, data area ignored\n", - *off); - *len = 0; - *off = 0; - } else if (*off < 0) { - ksmbd_debug(SMB, - "negative offset %d to data invalid ignore data area\n", - *off); - *off = 0; - *len = 0; - } else if (*len < 0) { - ksmbd_debug(SMB, - "negative data length %d invalid, data area ignored\n", - *len); - *len = 0; - } else if (*len > 128 * 1024) { - ksmbd_debug(SMB, "data area larger than 128K: %d\n", *len); - *len = 0; + ksmbd_debug(SMB, "offset %d too large\n", *off); + ret = -EINVAL; + } else if ((u64)*off + *len > MAX_STREAM_PROT_LEN) { + ksmbd_debug(SMB, "Request is larger than maximum stream protocol length(%u): %llu\n", + MAX_STREAM_PROT_LEN, (u64)*off + *len); + ret = -EINVAL; } - /* return pointer to beginning of data area, ie offset from SMB start */ - if ((*off != 0) && (*len != 0)) - return (char *)hdr + *off; - else - return NULL; + return ret; } /* * Calculate the size of the SMB message based on the fixed header * portion, the number of word parameters and the data portion of the message. */ -static unsigned int smb2_calc_size(void *buf) +static int smb2_calc_size(void *buf, unsigned int *len) { struct smb2_pdu *pdu = (struct smb2_pdu *)buf; struct smb2_hdr *hdr = &pdu->hdr; - int offset; /* the offset from the beginning of SMB to data area */ - int data_length; /* the length of the variable length data area */ + unsigned int offset; /* the offset from the beginning of SMB to data area */ + unsigned int data_length; /* the length of the variable length data area */ + int ret; + /* Structure Size has already been checked to make sure it is 64 */ - int len = le16_to_cpu(hdr->StructureSize); + *len = le16_to_cpu(hdr->StructureSize); /* * StructureSize2, ie length of fixed parameter area has already * been checked to make sure it is the correct length. */ - len += le16_to_cpu(pdu->StructureSize2); + *len += le16_to_cpu(pdu->StructureSize2); + /* + * StructureSize2 of smb2_lock pdu is set to 48, indicating + * the size of smb2 lock request with single smb2_lock_element + * regardless of number of locks. Subtract single + * smb2_lock_element for correct buffer size check. + */ + if (hdr->Command == SMB2_LOCK) + *len -= sizeof(struct smb2_lock_element); if (has_smb2_data_area[le16_to_cpu(hdr->Command)] == false) goto calc_size_exit; - smb2_get_data_area_len(&offset, &data_length, hdr); - ksmbd_debug(SMB, "SMB2 data length %d offset %d\n", data_length, + ret = smb2_get_data_area_len(&offset, &data_length, hdr); + if (ret) + return ret; + ksmbd_debug(SMB, "SMB2 data length %u offset %u\n", data_length, offset); if (data_length > 0) { @@ -237,16 +231,19 @@ static unsigned int smb2_calc_size(void *buf) * for some commands, typically those with odd StructureSize, * so we must add one to the calculation. */ - if (offset + 1 < len) + if (offset + 1 < *len) { ksmbd_debug(SMB, - "data area offset %d overlaps SMB2 header %d\n", - offset + 1, len); - else - len = offset + data_length; + "data area offset %d overlaps SMB2 header %u\n", + offset + 1, *len); + return -EINVAL; + } + + *len = offset + data_length; } + calc_size_exit: - ksmbd_debug(SMB, "SMB2 len %d\n", len); - return len; + ksmbd_debug(SMB, "SMB2 len %u\n", *len); + return 0; } static inline int smb2_query_info_req_len(struct smb2_query_info_req *h) @@ -391,9 +388,11 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) return 1; } - clc_len = smb2_calc_size(hdr); + if (smb2_calc_size(hdr, &clc_len)) + return 1; + if (len != clc_len) { - /* server can return one byte more due to implied bcc[0] */ + /* client can return one byte more due to implied bcc[0] */ if (clc_len == len + 1) return 0; @@ -418,9 +417,6 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) return 0; } - if (command == SMB2_LOCK_HE && len == 88) - return 0; - ksmbd_debug(SMB, "cli req too short, len %d not %d. cmd:%d mid:%llu\n", len, clc_len, command, -- cgit v1.2.3 From 51a1387393d98c2ba52d53d089720fa9f1463178 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 13:09:24 +0900 Subject: ksmbd: remove the leftover of smb2.0 dialect support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Although ksmbd doesn't send SMB2.0 support in supported dialect list of smb negotiate response, There is the leftover of smb2.0 dialect. This patch remove it not to support SMB2.0 in ksmbd. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2ops.c | 5 ----- fs/ksmbd/smb2pdu.c | 34 +++++++++------------------------- fs/ksmbd/smb2pdu.h | 1 - fs/ksmbd/smb_common.c | 6 +++--- 4 files changed, 12 insertions(+), 34 deletions(-) diff --git a/fs/ksmbd/smb2ops.c b/fs/ksmbd/smb2ops.c index 197473871aa4..b06456eb587b 100644 --- a/fs/ksmbd/smb2ops.c +++ b/fs/ksmbd/smb2ops.c @@ -187,11 +187,6 @@ static struct smb_version_cmds smb2_0_server_cmds[NUMBER_OF_SMB2_COMMANDS] = { [SMB2_CHANGE_NOTIFY_HE] = { .proc = smb2_notify}, }; -int init_smb2_0_server(struct ksmbd_conn *conn) -{ - return -EOPNOTSUPP; -} - /** * init_smb2_1_server() - initialize a smb server connection with smb2.1 * command dispatcher diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index dcf907738610..cd2313af811d 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -236,9 +236,6 @@ int init_smb2_neg_rsp(struct ksmbd_work *work) if (conn->need_neg == false) return -EINVAL; - if (!(conn->dialect >= SMB20_PROT_ID && - conn->dialect <= SMB311_PROT_ID)) - return -EINVAL; rsp_hdr = work->response_buf; @@ -1166,13 +1163,6 @@ int smb2_handle_negotiate(struct ksmbd_work *work) case SMB21_PROT_ID: init_smb2_1_server(conn); break; - case SMB20_PROT_ID: - rc = init_smb2_0_server(conn); - if (rc) { - rsp->hdr.Status = STATUS_NOT_SUPPORTED; - goto err_out; - } - break; case SMB2X_PROT_ID: case BAD_PROT_ID: default: @@ -1191,11 +1181,9 @@ int smb2_handle_negotiate(struct ksmbd_work *work) rsp->MaxReadSize = cpu_to_le32(conn->vals->max_read_size); rsp->MaxWriteSize = cpu_to_le32(conn->vals->max_write_size); - if (conn->dialect > SMB20_PROT_ID) { - memcpy(conn->ClientGUID, req->ClientGUID, - SMB2_CLIENT_GUID_SIZE); - conn->cli_sec_mode = le16_to_cpu(req->SecurityMode); - } + memcpy(conn->ClientGUID, req->ClientGUID, + SMB2_CLIENT_GUID_SIZE); + conn->cli_sec_mode = le16_to_cpu(req->SecurityMode); rsp->StructureSize = cpu_to_le16(65); rsp->DialectRevision = cpu_to_le16(conn->dialect); @@ -1537,11 +1525,9 @@ binding_session: } } - if (conn->dialect > SMB20_PROT_ID) { - if (!ksmbd_conn_lookup_dialect(conn)) { - pr_err("fail to verify the dialect\n"); - return -ENOENT; - } + if (!ksmbd_conn_lookup_dialect(conn)) { + pr_err("fail to verify the dialect\n"); + return -ENOENT; } return 0; } @@ -1623,11 +1609,9 @@ static int krb5_authenticate(struct ksmbd_work *work) } } - if (conn->dialect > SMB20_PROT_ID) { - if (!ksmbd_conn_lookup_dialect(conn)) { - pr_err("fail to verify the dialect\n"); - return -ENOENT; - } + if (!ksmbd_conn_lookup_dialect(conn)) { + pr_err("fail to verify the dialect\n"); + return -ENOENT; } return 0; } diff --git a/fs/ksmbd/smb2pdu.h b/fs/ksmbd/smb2pdu.h index 261825d06391..a6dec5ec6a54 100644 --- a/fs/ksmbd/smb2pdu.h +++ b/fs/ksmbd/smb2pdu.h @@ -1637,7 +1637,6 @@ struct smb2_posix_info { } __packed; /* functions */ -int init_smb2_0_server(struct ksmbd_conn *conn); void init_smb2_1_server(struct ksmbd_conn *conn); void init_smb3_0_server(struct ksmbd_conn *conn); void init_smb3_02_server(struct ksmbd_conn *conn); diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index b6c4c7e960fa..707490ab1f4c 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -88,7 +88,7 @@ unsigned int ksmbd_server_side_copy_max_total_size(void) inline int ksmbd_min_protocol(void) { - return SMB2_PROT; + return SMB21_PROT; } inline int ksmbd_max_protocol(void) @@ -427,7 +427,7 @@ int ksmbd_extract_shortname(struct ksmbd_conn *conn, const char *longname, static int __smb2_negotiate(struct ksmbd_conn *conn) { - return (conn->dialect >= SMB20_PROT_ID && + return (conn->dialect >= SMB21_PROT_ID && conn->dialect <= SMB311_PROT_ID); } @@ -457,7 +457,7 @@ int ksmbd_smb_negotiate_common(struct ksmbd_work *work, unsigned int command) } } - if (command == SMB2_NEGOTIATE_HE) { + if (command == SMB2_NEGOTIATE_HE && __smb2_negotiate(conn)) { ret = smb2_handle_negotiate(work); init_smb2_neg_rsp(work); return ret; -- cgit v1.2.3 From c7705eec78c999485609274c7ac5c27def8b84f1 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 4 Oct 2021 20:44:52 +0900 Subject: ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tom suggested to use buf_data_size that is already calculated, to verify these offsets. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Suggested-by: Tom Talpey Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index cd2313af811d..721b9a89c2d4 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -8395,20 +8395,18 @@ int smb3_decrypt_req(struct ksmbd_work *work) struct smb2_hdr *hdr; unsigned int pdu_length = get_rfc1002_len(buf); struct kvec iov[2]; - unsigned int buf_data_size = pdu_length + 4 - + int buf_data_size = pdu_length + 4 - sizeof(struct smb2_transform_hdr); struct smb2_transform_hdr *tr_hdr = (struct smb2_transform_hdr *)buf; int rc = 0; - if (pdu_length + 4 < - sizeof(struct smb2_transform_hdr) + sizeof(struct smb2_hdr)) { + if (buf_data_size < sizeof(struct smb2_hdr)) { pr_err("Transform message is too small (%u)\n", pdu_length); return -ECONNABORTED; } - if (pdu_length + 4 < - le32_to_cpu(tr_hdr->OriginalMessageSize) + sizeof(struct smb2_transform_hdr)) { + if (buf_data_size < le32_to_cpu(tr_hdr->OriginalMessageSize)) { pr_err("Transform message is broken\n"); return -ECONNABORTED; } -- cgit v1.2.3 From 2db72604f3eaebd6175548bf64372e163724ebe3 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 1 Oct 2021 11:53:49 +0900 Subject: ksmbd: fix version mismatch with out of tree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix version mismatch with out of tree, This updated version will be matched with ksmbd-tools. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Cc: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/glob.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ksmbd/glob.h b/fs/ksmbd/glob.h index 49a5a3afa118..5b8f3e0ebdb3 100644 --- a/fs/ksmbd/glob.h +++ b/fs/ksmbd/glob.h @@ -12,7 +12,7 @@ #include "unicode.h" #include "vfs_cache.h" -#define KSMBD_VERSION "3.1.9" +#define KSMBD_VERSION "3.4.2" extern int ksmbd_debug_types; -- cgit v1.2.3 From 64e7875560270b8f669fca9fcd6a689fea56fbeb Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 3 Oct 2021 13:19:00 +0900 Subject: ksmbd: fix oops from fuse driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marios reported kernel oops from fuse driver when ksmbd call mark_inode_dirty(). This patch directly update ->i_ctime after removing mark_inode_ditry() and notify_change will put inode to dirty list. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Hyunchul Lee Reported-by: Marios Makassikis Tested-by: Marios Makassikis Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 721b9a89c2d4..005aa93a49d6 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -5483,7 +5483,6 @@ static int set_file_basic_info(struct ksmbd_file *fp, struct ksmbd_share_config *share) { struct iattr attrs; - struct timespec64 ctime; struct file *filp; struct inode *inode; struct user_namespace *user_ns; @@ -5505,13 +5504,11 @@ static int set_file_basic_info(struct ksmbd_file *fp, attrs.ia_valid |= (ATTR_ATIME | ATTR_ATIME_SET); } - if (file_info->ChangeTime) { + attrs.ia_valid |= ATTR_CTIME; + if (file_info->ChangeTime) attrs.ia_ctime = ksmbd_NTtimeToUnix(file_info->ChangeTime); - ctime = attrs.ia_ctime; - attrs.ia_valid |= ATTR_CTIME; - } else { - ctime = inode->i_ctime; - } + else + attrs.ia_ctime = inode->i_ctime; if (file_info->LastWriteTime) { attrs.ia_mtime = ksmbd_NTtimeToUnix(file_info->LastWriteTime); @@ -5557,11 +5554,9 @@ static int set_file_basic_info(struct ksmbd_file *fp, return -EACCES; inode_lock(inode); + inode->i_ctime = attrs.ia_ctime; + attrs.ia_valid &= ~ATTR_CTIME; rc = notify_change(user_ns, dentry, &attrs, NULL); - if (!rc) { - inode->i_ctime = ctime; - mark_inode_dirty(inode); - } inode_unlock(inode); } return rc; -- cgit v1.2.3 From e47e3fa17c43180f9e147ba35a30c731d7648f7a Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Mon, 23 Aug 2021 11:17:38 -0400 Subject: MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer Add myself as a reviewer for Asahi Linux (Apple M1) patches. I would like to be CC'ed on Asahi Linux patches for review and testing. I am also collecting Asahi Linux patches downstream, rebasing on linux-next periodically, and would like to be notified of what to cherry-pick from lists. Cc: Hector Martin Cc: Sven Peter Acked-by: Hector Martin Acked-by: Sven Peter Signed-off-by: Alyssa Rosenzweig --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..86fcff4da896 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1275,6 +1275,7 @@ F: drivers/input/mouse/bcm5974.c APPLE DART IOMMU DRIVER M: Sven Peter +R: Alyssa Rosenzweig L: iommu@lists.linux-foundation.org S: Maintained F: Documentation/devicetree/bindings/iommu/apple,dart.yaml @@ -1711,6 +1712,7 @@ F: drivers/*/*alpine* ARM/APPLE MACHINE SUPPORT M: Hector Martin +R: Alyssa Rosenzweig L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained W: https://asahilinux.org -- cgit v1.2.3 From 56dd05023675a35541e9baeba868bd0472eb97f9 Mon Sep 17 00:00:00 2001 From: Sven Peter Date: Thu, 7 Oct 2021 07:34:30 +0200 Subject: MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer Hector suggested I should add myself to help him maintain the platform. Acked-by: Hector Martin Signed-off-by: Sven Peter --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 86fcff4da896..5182a1980917 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1712,6 +1712,7 @@ F: drivers/*/*alpine* ARM/APPLE MACHINE SUPPORT M: Hector Martin +M: Sven Peter R: Alyssa Rosenzweig L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -- cgit v1.2.3 From 3fb937f441c64af1eec60bfd3732f64001fcc534 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 1 Oct 2021 15:58:10 +0200 Subject: PCI: ACPI: Check parent pointer in acpi_pci_find_companion() If acpi_pci_find_companion() is called for a device whose parent pointer is NULL, it will crash when attempting to get the ACPI companion of the parent due to a NULL pointer dereference in the ACPI_COMPANION() macro. This was not a problem before commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") that made pci_setup_device() call pci_set_acpi_fwnode() and so it allowed devices with NULL parent pointers to be passed to acpi_pci_find_companion() which is the case in pci_iov_add_virtfn(), for instance. Fix this issue by making acpi_pci_find_companion() check the device's parent pointer upfront and bail out if it is NULL. While pci_iov_add_virtfn() can be changed to set the device's parent pointer before calling pci_setup_device() for it, checking pointers against NULL before dereferencing them is prudent anyway and looking for ACPI companions of virtual functions isn't really useful. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/linux-acpi/8e4bbd5c59de31db71f718556654c0aa077df03d.camel@linux.ibm.com/ Reported-by: Niklas Schnelle Tested-by: Niklas Schnelle Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas --- drivers/pci/pci-acpi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 0f40943a9a18..260a06fb78a6 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -1249,6 +1249,9 @@ static struct acpi_device *acpi_pci_find_companion(struct device *dev) bool check_children; u64 addr; + if (!dev->parent) + return NULL; + down_read(&pci_acpi_companion_lookup_sem); adev = pci_acpi_find_companion_hook ? -- cgit v1.2.3 From 136f282028dae7d9dd68469b197aa2b36b410992 Mon Sep 17 00:00:00 2001 From: Miguel Bernal Marin Date: Wed, 6 Oct 2021 00:13:18 -0500 Subject: ACPI: tools: fix compilation error When ACPI tools are compiled, the following error is showed: $ cd tools/power/acpi $ make DESCEND tools/acpidbg MKDIR include CP include CC tools/acpidbg/acpidbg.o In file included from /home/linux/tools/power/acpi/include/acpi/platform/acenv.h:152, from /home/linux/tools/power/acpi/include/acpi/acpi.h:22, from acpidbg.c:9: /home/linux/tools/power/acpi/include/acpi/platform/acgcc.h:25:10: fatal error: linux/stdarg.h: No such file or directory 29 | #include | ^~~~~~~~~~~~~~~~ compilation terminated. Use the ACPICA logic: just identify when it is used inside the kernel or by an ACPI tool. Fixes: c0891ac15f04 ("isystem: ship and use stdarg.h") Signed-off-by: Miguel Bernal Marin [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki --- include/acpi/platform/acgcc.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h index fb172a03a753..20ecb004f5a4 100644 --- a/include/acpi/platform/acgcc.h +++ b/include/acpi/platform/acgcc.h @@ -22,9 +22,14 @@ typedef __builtin_va_list va_list; #define va_arg(v, l) __builtin_va_arg(v, l) #define va_copy(d, s) __builtin_va_copy(d, s) #else +#ifdef __KERNEL__ #include -#endif -#endif +#else +/* Used to build acpi tools */ +#include +#endif /* __KERNEL__ */ +#endif /* ACPI_USE_BUILTIN_STDARG */ +#endif /* ! va_arg */ #define ACPI_INLINE __inline__ -- cgit v1.2.3 From 902c0b1887522a099aa4e1e6b4b476c2fe5dd13e Mon Sep 17 00:00:00 2001 From: Juhee Kang Date: Mon, 4 Oct 2021 21:14:38 +0900 Subject: netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fixes: 68983a354a65 ("netfilter: xtables: Add snapshot of hardidletimer target") Signed-off-by: Juhee Kang Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_IDLETIMER.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c index 7b2f359bfce4..2f7cf5ecebf4 100644 --- a/net/netfilter/xt_IDLETIMER.c +++ b/net/netfilter/xt_IDLETIMER.c @@ -137,7 +137,7 @@ static int idletimer_tg_create(struct idletimer_tg_info *info) { int ret; - info->timer = kmalloc(sizeof(*info->timer), GFP_KERNEL); + info->timer = kzalloc(sizeof(*info->timer), GFP_KERNEL); if (!info->timer) { ret = -ENOMEM; goto out; -- cgit v1.2.3 From 77076934afdcd46516caf18ed88b2f88025c9ddb Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 5 Oct 2021 22:54:54 +0200 Subject: netfilter: Kconfig: use 'default y' instead of 'm' for bool config option This option, NF_CONNTRACK_SECMARK, is a bool, so it can never be 'm'. Fixes: 33b8e77605620 ("[NETFILTER]: Add CONFIG_NETFILTER_ADVANCED option") Signed-off-by: Vegard Nossum Signed-off-by: Pablo Neira Ayuso --- net/netfilter/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 54395266339d..92a747896f80 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -109,7 +109,7 @@ config NF_CONNTRACK_MARK config NF_CONNTRACK_SECMARK bool 'Connection tracking security mark support' depends on NETWORK_SECMARK - default m if NETFILTER_ADVANCED=n + default y if NETFILTER_ADVANCED=n help This option enables security markings to be applied to connections. Typically they are copied to connections from -- cgit v1.2.3 From 68a3765c659f809dcaac20030853a054646eb739 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 6 Oct 2021 16:20:34 +0200 Subject: netfilter: nf_tables: skip netdev events generated on netns removal syzbot reported following (harmless) WARN: WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468 nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline] nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline] __nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524 nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline] nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382 reproducer: unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \ nft add chain netdev t ingress \{ type filter hook ingress device "br0" \ priority 0\; policy drop\; \}' Problem is that when netns device exit hooks create the UNREGISTER event, the .pre_exit hook for nf_tables core has already removed the base hook. Notifier attempts to do this again. The need to do base hook unregister unconditionally was needed in the past, because notifier was last stage where reg->dev dereference was safe. Now that nf_tables does the hook removal in .pre_exit, this isn't needed anymore. Reported-and-tested-by: syzbot+154bd5be532a63aa778b@syzkaller.appspotmail.com Fixes: 767d1216bff825 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_chain_filter.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nft_chain_filter.c b/net/netfilter/nft_chain_filter.c index 5b02408a920b..3ced0eb6b7c3 100644 --- a/net/netfilter/nft_chain_filter.c +++ b/net/netfilter/nft_chain_filter.c @@ -342,12 +342,6 @@ static void nft_netdev_event(unsigned long event, struct net_device *dev, return; } - /* UNREGISTER events are also happening on netns exit. - * - * Although nf_tables core releases all tables/chains, only this event - * handler provides guarantee that hook->ops.dev is still accessible, - * so we cannot skip exiting net namespaces. - */ __nft_release_basechain(ctx); } @@ -366,6 +360,9 @@ static int nf_tables_netdev_event(struct notifier_block *this, event != NETDEV_CHANGENAME) return NOTIFY_DONE; + if (!check_net(ctx.net)) + return NOTIFY_DONE; + nft_net = nft_pernet(ctx.net); mutex_lock(&nft_net->commit_mutex); list_for_each_entry(table, &nft_net->tables, list) { -- cgit v1.2.3 From 19ea40dddf1833db868533958ca066f368862211 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 14 Sep 2021 14:57:59 +0800 Subject: btrfs: unlock newly allocated extent buffer after error [BUG] There is a bug report that injected ENOMEM error could leave a tree block locked while we return to user-space: BTRFS info (device loop0): enabling ssd optimizations FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 fail_dump lib/fault-inject.c:52 [inline] should_fail+0x13c/0x160 lib/fault-inject.c:146 should_failslab+0x5/0x10 mm/slab_common.c:1328 slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494 slab_alloc_node mm/slub.c:3120 [inline] slab_alloc mm/slub.c:3214 [inline] kmem_cache_alloc+0x44/0x280 mm/slub.c:3219 btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline] btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833 __btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415 btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570 btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768 btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905 btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530 btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783 lookup_open+0x660/0x780 fs/namei.c:3282 open_last_lookups fs/namei.c:3352 [inline] path_openat+0x465/0xe20 fs/namei.c:3557 do_filp_open+0xe3/0x170 fs/namei.c:3588 do_sys_openat2+0x357/0x4a0 fs/open.c:1200 do_sys_open+0x87/0xd0 fs/open.c:1216 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x46ae99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99 RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800 RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017 R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0 ================================================ WARNING: lock held when returning to user space! 5.15.0-rc1 #16 Not tainted ------------------------------------------------ syz-executor/7579 is leaving the kernel with locks still held! 1 lock held by syz-executor/7579: #0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112 [CAUSE] In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new extent buffer @buf is locked, but if later operations like adding delayed tree ref fail, we just free @buf without unlocking it, resulting above warning. [FIX] Unlock @buf in out_free_buf: label. Reported-by: Hao Sun Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/ CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index fc3da7585fb7..0ab456cb4bf8 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4859,6 +4859,7 @@ struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans, out_free_delayed: btrfs_free_delayed_extent_op(extent_op); out_free_buf: + btrfs_tree_unlock(buf); free_extent_buffer(buf); out_free_reserved: btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, 0); -- cgit v1.2.3 From d175209be04d7d263fa1a54cde7608c706c9d0d7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 1 Oct 2021 13:57:18 -0400 Subject: btrfs: update refs for any root except tree log roots I hit a stuck relocation on btrfs/061 during my overnight testing. This turned out to be because we had left over extent entries in our extent root for a data reloc inode that no longer existed. This happened because in btrfs_drop_extents() we only update refs if we have SHAREABLE set or we are the tree_root. This regression was introduced by aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree") where we stopped setting SHAREABLE for the data reloc tree. The problem here is we actually do want to update extent references for data extents in the data reloc tree, in fact we only don't want to update extent references if the file extents are in the log tree. Update this check to only skip updating references in the case of the log tree. This is relatively rare, because you have to be running scrub at the same time, which is what btrfs/061 does. The data reloc inode has its extents pre-allocated, and then we copy the extent into the pre-allocated chunks. We theoretically should never be calling btrfs_drop_extents() on a data reloc inode. The exception of course is with scrub, if our pre-allocated extent falls inside of the block group we are scrubbing, then the block group will be marked read only and we will be forced to cow that extent. This means we will call btrfs_drop_extents() on that range when we COW that file extent. This isn't really problematic if we do this, the data reloc inode requires that our extent lengths match exactly with the extent we are copying, thankfully we validate the extent is correct with get_new_location(), so if we happen to COW only part of the extent we won't link it in when we do the relocation, so we are safe from any other shenanigans that arise because of this interaction with scrub. Fixes: aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree") CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Signed-off-by: David Sterba --- fs/btrfs/file.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 7ff577005d0f..a949cb2894f4 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -734,8 +734,7 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, if (args->start >= inode->disk_i_size && !args->replace_extent) modify_tree = 0; - update_refs = (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) || - root == fs_info->tree_root); + update_refs = (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID); while (1) { recow = 0; ret = btrfs_lookup_file_extent(trans, root, path, ino, -- cgit v1.2.3 From 77a5b9e3d14cbce49ceed2766b2003c034c066dc Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 1 Oct 2021 13:52:30 +0100 Subject: btrfs: deal with errors when checking if a dir entry exists during log replay Currently inode_in_dir() ignores errors returned from btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating any errors as if the directory entry does not exists in the fs/subvolume tree, which is obviously not correct, as we can get errors such as -EIO when reading extent buffers while searching the fs/subvolume's tree. Fix that by making inode_in_dir() return the errors and making its only caller, add_inode_ref(), deal with returned errors as well. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 47 +++++++++++++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f7efc26aa82a..491d4ba22cfc 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -939,9 +939,11 @@ out: } /* - * helper function to see if a given name and sequence number found - * in an inode back reference are already in a directory and correctly - * point to this inode + * See if a given name and sequence number found in an inode back reference are + * already in a directory and correctly point to this inode. + * + * Returns: < 0 on error, 0 if the directory entry does not exists and 1 if it + * exists. */ static noinline int inode_in_dir(struct btrfs_root *root, struct btrfs_path *path, @@ -950,29 +952,35 @@ static noinline int inode_in_dir(struct btrfs_root *root, { struct btrfs_dir_item *di; struct btrfs_key location; - int match = 0; + int ret = 0; di = btrfs_lookup_dir_index_item(NULL, root, path, dirid, index, name, name_len, 0); - if (di && !IS_ERR(di)) { + if (IS_ERR(di)) { + if (PTR_ERR(di) != -ENOENT) + ret = PTR_ERR(di); + goto out; + } else if (di) { btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location); if (location.objectid != objectid) goto out; - } else + } else { goto out; - btrfs_release_path(path); + } + btrfs_release_path(path); di = btrfs_lookup_dir_item(NULL, root, path, dirid, name, name_len, 0); - if (di && !IS_ERR(di)) { - btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location); - if (location.objectid != objectid) - goto out; - } else + if (IS_ERR(di)) { + ret = PTR_ERR(di); goto out; - match = 1; + } else if (di) { + btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location); + if (location.objectid == objectid) + ret = 1; + } out: btrfs_release_path(path); - return match; + return ret; } /* @@ -1517,10 +1525,12 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans, if (ret) goto out; - /* if we already have a perfect match, we're done */ - if (!inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)), - btrfs_ino(BTRFS_I(inode)), ref_index, - name, namelen)) { + ret = inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)), + btrfs_ino(BTRFS_I(inode)), ref_index, + name, namelen); + if (ret < 0) { + goto out; + } else if (ret == 0) { /* * look for a conflicting back reference in the * metadata. if we find one we have to unlink that name @@ -1580,6 +1590,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans, if (ret) goto out; } + /* Else, ret == 1, we already have a perfect match, we're done. */ ref_ptr = (unsigned long)(ref_ptr + ref_struct_size) + namelen; kfree(name); -- cgit v1.2.3 From e15ac6413745e3def00e663de00aea5a717311c1 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 1 Oct 2021 13:52:31 +0100 Subject: btrfs: deal with errors when replaying dir entry during log replay At replay_one_one(), we are treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree. So fix that and return the error to the caller when it is not -ENOENT. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 491d4ba22cfc..007b5051b2f1 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1988,7 +1988,14 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, ret = -EINVAL; goto out; } - if (IS_ERR_OR_NULL(dst_di)) { + + if (dst_di == ERR_PTR(-ENOENT)) + dst_di = NULL; + + if (IS_ERR(dst_di)) { + ret = PTR_ERR(dst_di); + goto out; + } else if (!dst_di) { /* we need a sequence number to insert, so we only * do inserts for the BTRFS_DIR_INDEX_KEY types */ -- cgit v1.2.3 From 52db77791fe24538c8aa2a183248399715f6b380 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 1 Oct 2021 13:52:32 +0100 Subject: btrfs: deal with errors when adding inode reference during log replay At __inode_add_ref(), we treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree. So fix that and return the error to the caller when it is not -ENOENT. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 007b5051b2f1..1b6008240ec6 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1190,7 +1190,10 @@ next: /* look for a conflicting sequence number */ di = btrfs_lookup_dir_index_item(trans, root, path, btrfs_ino(dir), ref_index, name, namelen, 0); - if (di && !IS_ERR(di)) { + if (IS_ERR(di)) { + if (PTR_ERR(di) != -ENOENT) + return PTR_ERR(di); + } else if (di) { ret = drop_one_dir_item(trans, root, path, dir, di); if (ret) return ret; @@ -1200,7 +1203,9 @@ next: /* look for a conflicting name */ di = btrfs_lookup_dir_item(trans, root, path, btrfs_ino(dir), name, namelen, 0); - if (di && !IS_ERR(di)) { + if (IS_ERR(di)) { + return PTR_ERR(di); + } else if (di) { ret = drop_one_dir_item(trans, root, path, dir, di); if (ret) return ret; -- cgit v1.2.3 From 8dcbc26194eb872cc3430550fb70bb461424d267 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 1 Oct 2021 13:52:33 +0100 Subject: btrfs: unify lookup return value when dir entry is missing btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir entries and both are used during log replay or when updating a log tree during an unlink. However when the dir item does not exists, btrfs_lookup_dir_item() returns NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if the dir item exists but there is no matching entry for a given name or index, both return NULL. This makes the call sites during log replay to be more verbose than necessary and it makes it easy to miss this slight difference. Since we don't need to distinguish between those two cases, make btrfs_lookup_dir_index_item() always return NULL when there is no matching directory entry - either because there isn't any dir entry or because there is one but it does not match the given name and index. Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to 'index' since it is supposed to match an index number, and the name 'objectid' is not very good because it can easily be confused with an inode number (like the inode number a dir entry points to). CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 2 +- fs/btrfs/dir-item.c | 48 +++++++++++++++++++++++++++++++++++++----------- fs/btrfs/tree-log.c | 14 ++++---------- 3 files changed, 42 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index f07c82fafa04..852a49dcc22b 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3030,7 +3030,7 @@ struct btrfs_dir_item * btrfs_lookup_dir_index_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u64 dir, - u64 objectid, const char *name, int name_len, + u64 index, const char *name, int name_len, int mod); struct btrfs_dir_item * btrfs_search_dir_index_item(struct btrfs_root *root, diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index f1274d5c3805..7721ce0c0604 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -190,9 +190,20 @@ static struct btrfs_dir_item *btrfs_lookup_match_dir( } /* - * lookup a directory item based on name. 'dir' is the objectid - * we're searching in, and 'mod' tells us if you plan on deleting the - * item (use mod < 0) or changing the options (use mod > 0) + * Lookup for a directory item by name. + * + * @trans: The transaction handle to use. Can be NULL if @mod is 0. + * @root: The root of the target tree. + * @path: Path to use for the search. + * @dir: The inode number (objectid) of the directory. + * @name: The name associated to the directory entry we are looking for. + * @name_len: The length of the name. + * @mod: Used to indicate if the tree search is meant for a read only + * lookup, for a modification lookup or for a deletion lookup, so + * its value should be 0, 1 or -1, respectively. + * + * Returns: NULL if the dir item does not exists, an error pointer if an error + * happened, or a pointer to a dir item if a dir item exists for the given name. */ struct btrfs_dir_item *btrfs_lookup_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, @@ -273,27 +284,42 @@ out: } /* - * lookup a directory item based on index. 'dir' is the objectid - * we're searching in, and 'mod' tells us if you plan on deleting the - * item (use mod < 0) or changing the options (use mod > 0) + * Lookup for a directory index item by name and index number. * - * The name is used to make sure the index really points to the name you were - * looking for. + * @trans: The transaction handle to use. Can be NULL if @mod is 0. + * @root: The root of the target tree. + * @path: Path to use for the search. + * @dir: The inode number (objectid) of the directory. + * @index: The index number. + * @name: The name associated to the directory entry we are looking for. + * @name_len: The length of the name. + * @mod: Used to indicate if the tree search is meant for a read only + * lookup, for a modification lookup or for a deletion lookup, so + * its value should be 0, 1 or -1, respectively. + * + * Returns: NULL if the dir index item does not exists, an error pointer if an + * error happened, or a pointer to a dir item if the dir index item exists and + * matches the criteria (name and index number). */ struct btrfs_dir_item * btrfs_lookup_dir_index_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u64 dir, - u64 objectid, const char *name, int name_len, + u64 index, const char *name, int name_len, int mod) { + struct btrfs_dir_item *di; struct btrfs_key key; key.objectid = dir; key.type = BTRFS_DIR_INDEX_KEY; - key.offset = objectid; + key.offset = index; - return btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod); + di = btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod); + if (di == ERR_PTR(-ENOENT)) + return NULL; + + return di; } struct btrfs_dir_item * diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 1b6008240ec6..1bb5ebf13383 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -957,8 +957,7 @@ static noinline int inode_in_dir(struct btrfs_root *root, di = btrfs_lookup_dir_index_item(NULL, root, path, dirid, index, name, name_len, 0); if (IS_ERR(di)) { - if (PTR_ERR(di) != -ENOENT) - ret = PTR_ERR(di); + ret = PTR_ERR(di); goto out; } else if (di) { btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location); @@ -1191,8 +1190,7 @@ next: di = btrfs_lookup_dir_index_item(trans, root, path, btrfs_ino(dir), ref_index, name, namelen, 0); if (IS_ERR(di)) { - if (PTR_ERR(di) != -ENOENT) - return PTR_ERR(di); + return PTR_ERR(di); } else if (di) { ret = drop_one_dir_item(trans, root, path, dir, di); if (ret) @@ -1994,9 +1992,6 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, goto out; } - if (dst_di == ERR_PTR(-ENOENT)) - dst_di = NULL; - if (IS_ERR(dst_di)) { ret = PTR_ERR(dst_di); goto out; @@ -2304,7 +2299,7 @@ again: dir_key->offset, name, name_len, 0); } - if (!log_di || log_di == ERR_PTR(-ENOENT)) { + if (!log_di) { btrfs_dir_item_key_to_cpu(eb, di, &location); btrfs_release_path(path); btrfs_release_path(log_path); @@ -3563,8 +3558,7 @@ out_unlock: if (err == -ENOSPC) { btrfs_set_log_full_commit(trans); err = 0; - } else if (err < 0 && err != -ENOENT) { - /* ENOENT can be returned if the entry hasn't been fsynced yet */ + } else if (err < 0) { btrfs_abort_transaction(trans, err); } -- cgit v1.2.3 From cfd312695b71df04c3a2597859ff12c470d1e2e4 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 1 Oct 2021 13:48:18 +0100 Subject: btrfs: check for error when looking up inode during dir entry replay At replay_one_name(), we are treating any error from btrfs_lookup_inode() as if the inode does not exists. Fix this by checking for an error and returning it to the caller. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 1bb5ebf13383..b415c5ec03ea 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1950,8 +1950,8 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, struct btrfs_key log_key; struct inode *dir; u8 log_type; - int exists; - int ret = 0; + bool exists; + int ret; bool update_size = (key->type == BTRFS_DIR_INDEX_KEY); bool name_added = false; @@ -1971,12 +1971,12 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, name_len); btrfs_dir_item_key_to_cpu(eb, di, &log_key); - exists = btrfs_lookup_inode(trans, root, path, &log_key, 0); - if (exists == 0) - exists = 1; - else - exists = 0; + ret = btrfs_lookup_inode(trans, root, path, &log_key, 0); btrfs_release_path(path); + if (ret < 0) + goto out; + exists = (ret == 0); + ret = 0; if (key->type == BTRFS_DIR_ITEM_KEY) { dst_di = btrfs_lookup_dir_item(trans, root, path, key->objectid, -- cgit v1.2.3 From 4afb912f439c4bc4e6a4f3e7547f2e69e354108f Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 5 Oct 2021 16:35:27 -0400 Subject: btrfs: fix abort logic in btrfs_replace_file_extents Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index a949cb2894f4..a1762363f61f 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2703,14 +2703,16 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, drop_args.bytes_found); if (ret != -ENOSPC) { /* - * When cloning we want to avoid transaction aborts when - * nothing was done and we are attempting to clone parts - * of inline extents, in such cases -EOPNOTSUPP is - * returned by __btrfs_drop_extents() without having - * changed anything in the file. + * The only time we don't want to abort is if we are + * attempting to clone a partial inline extent, in which + * case we'll get EOPNOTSUPP. However if we aren't + * clone we need to abort no matter what, because if we + * got EOPNOTSUPP via prealloc then we messed up and + * need to abort. */ - if (extent_info && !extent_info->is_new_extent && - ret && ret != -EOPNOTSUPP) + if (ret && + (ret != -EOPNOTSUPP || + (extent_info && extent_info->is_new_extent))) btrfs_abort_transaction(trans, ret); break; } -- cgit v1.2.3 From 3ef6ca4f354c53abf263cbeb51e7272523c294d8 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Sat, 2 Oct 2021 16:57:13 -0700 Subject: checksyscalls: Unconditionally ignore fstat{,at}64 These can be replaced by statx(). Since rv32 has a 64-bit time_t we just never ended up with them in the first place. This is now an error due to -Werror. Suggested-by: Arnd Bergmann Reviewed-by: Arnd Bergmann Signed-off-by: Palmer Dabbelt --- scripts/checksyscalls.sh | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh index fd9777f63f14..9dbab13329fa 100755 --- a/scripts/checksyscalls.sh +++ b/scripts/checksyscalls.sh @@ -82,10 +82,8 @@ cat << EOF #define __IGNORE_truncate64 #define __IGNORE_stat64 #define __IGNORE_lstat64 -#define __IGNORE_fstat64 #define __IGNORE_fcntl64 #define __IGNORE_fadvise64_64 -#define __IGNORE_fstatat64 #define __IGNORE_fstatfs64 #define __IGNORE_statfs64 #define __IGNORE_llseek @@ -253,6 +251,10 @@ cat << EOF #define __IGNORE_getpmsg #define __IGNORE_putpmsg #define __IGNORE_vserver + +/* 64-bit ports never needed these, and new 32-bit ports can use statx */ +#define __IGNORE_fstat64 +#define __IGNORE_fstatat64 EOF } -- cgit v1.2.3 From d298b03506d3e161f7492c440babb0bfae35e650 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Oct 2021 18:33:52 +0200 Subject: x86/fpu: Restore the masking out of reserved MXCSR bits Ser Olmy reported a boot failure: init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \ in libc-2.33.so[b7bed000+156000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU: 0 PID: 1 Comm: init Tainted: G W 5.14.9 #1 Hardware name: Hewlett-Packard HP PC/HP Board, BIOS JD.00.06 12/06/2001 Call Trace: dump_stack_lvl dump_stack panic do_exit.cold do_group_exit get_signal arch_do_signal_or_restart ? force_sig_info_to_task ? force_sig exit_to_user_mode_prepare syscall_exit_to_user_mode do_int80_syscall_32 entry_INT80_32 on an old 32-bit Intel CPU: vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 microcode : 0x3 Ser bisected the problem to the commit in Fixes. tglx suggested reverting the rejection of invalid MXCSR values which this commit introduced and replacing it with what the old code did - simply masking them out to zero. Further debugging confirmed his suggestion: fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540 so restore the original behavior only for 32-bit kernels where you have ancient machines with buggy hardware. For 32-bit programs on 64-bit kernels, user space which supplies wrong MXCSR values is considered malicious so fail the sigframe restoration there. Fixes: 6f9866a166cd ("x86/fpu/signal: Let xrstor handle the features to init") Reported-by: Ser Olmy Signed-off-by: Borislav Petkov Tested-by: Ser Olmy Cc: Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic --- arch/x86/kernel/fpu/signal.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 445c57c9c539..fa17a27390ab 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -379,9 +379,14 @@ static int __fpu_restore_sig(void __user *buf, void __user *buf_fx, sizeof(fpu->state.fxsave))) return -EFAULT; - /* Reject invalid MXCSR values. */ - if (fpu->state.fxsave.mxcsr & ~mxcsr_feature_mask) - return -EINVAL; + if (IS_ENABLED(CONFIG_X86_64)) { + /* Reject invalid MXCSR values. */ + if (fpu->state.fxsave.mxcsr & ~mxcsr_feature_mask) + return -EINVAL; + } else { + /* Mask invalid bits out for historical reasons (broken hardware). */ + fpu->state.fxsave.mxcsr &= ~mxcsr_feature_mask; + } /* Enforce XFEATURE_MASK_FPSSE when XSAVE is enabled */ if (use_xsave()) -- cgit v1.2.3 From 2fbc349911e45d4ea5187b608c8d58db66496260 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Sun, 12 Sep 2021 23:26:06 +0200 Subject: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere It made -Werror sad. Signed-off-by: Adam Borowski Signed-off-by: Arnd Bergmann --- include/asm-generic/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index e93375c710b9..dea1d36a6402 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -957,7 +957,7 @@ static inline void __iomem *ioremap(phys_addr_t offset, size_t size) #ifndef iounmap #define iounmap iounmap -static inline void iounmap(void __iomem *addr) +static inline void iounmap(volatile void __iomem *addr) { } #endif -- cgit v1.2.3 From 612f71d7328c14369924384ad2170aae2a6abd92 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 7 Oct 2021 15:05:00 -0700 Subject: mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 55 ++++++++++++++-------------------------------------- 1 file changed, 15 insertions(+), 40 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index e5df0b5971c8..d073b2111382 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -528,7 +528,6 @@ static bool mptcp_check_data_fin(struct sock *sk) sk->sk_shutdown |= RCV_SHUTDOWN; smp_mb__before_atomic(); /* SHUTDOWN must be visible first */ - set_bit(MPTCP_DATA_READY, &msk->flags); switch (sk->sk_state) { case TCP_ESTABLISHED: @@ -742,10 +741,9 @@ void mptcp_data_ready(struct sock *sk, struct sock *ssk) /* Wake-up the reader only for in-sequence data */ mptcp_data_lock(sk); - if (move_skbs_to_msk(msk, ssk)) { - set_bit(MPTCP_DATA_READY, &msk->flags); + if (move_skbs_to_msk(msk, ssk)) sk->sk_data_ready(sk); - } + mptcp_data_unlock(sk); } @@ -847,7 +845,6 @@ static void mptcp_check_for_eof(struct mptcp_sock *msk) sk->sk_shutdown |= RCV_SHUTDOWN; smp_mb__before_atomic(); /* SHUTDOWN must be visible first */ - set_bit(MPTCP_DATA_READY, &msk->flags); sk->sk_data_ready(sk); } @@ -1759,21 +1756,6 @@ out: return copied ? : ret; } -static void mptcp_wait_data(struct sock *sk, long *timeo) -{ - DEFINE_WAIT_FUNC(wait, woken_wake_function); - struct mptcp_sock *msk = mptcp_sk(sk); - - add_wait_queue(sk_sleep(sk), &wait); - sk_set_bit(SOCKWQ_ASYNC_WAITDATA, sk); - - sk_wait_event(sk, timeo, - test_bit(MPTCP_DATA_READY, &msk->flags), &wait); - - sk_clear_bit(SOCKWQ_ASYNC_WAITDATA, sk); - remove_wait_queue(sk_sleep(sk), &wait); -} - static int __mptcp_recvmsg_mskq(struct mptcp_sock *msk, struct msghdr *msg, size_t len, int flags, @@ -2077,19 +2059,7 @@ static int mptcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, } pr_debug("block timeout %ld", timeo); - mptcp_wait_data(sk, &timeo); - } - - if (skb_queue_empty_lockless(&sk->sk_receive_queue) && - skb_queue_empty(&msk->receive_queue)) { - /* entire backlog drained, clear DATA_READY. */ - clear_bit(MPTCP_DATA_READY, &msk->flags); - - /* .. race-breaker: ssk might have gotten new data - * after last __mptcp_move_skbs() returned false. - */ - if (unlikely(__mptcp_move_skbs(msk))) - set_bit(MPTCP_DATA_READY, &msk->flags); + sk_wait_data(sk, &timeo, NULL); } out_err: @@ -2098,9 +2068,9 @@ out_err: tcp_recv_timestamp(msg, sk, &tss); } - pr_debug("msk=%p data_ready=%d rx queue empty=%d copied=%d", - msk, test_bit(MPTCP_DATA_READY, &msk->flags), - skb_queue_empty_lockless(&sk->sk_receive_queue), copied); + pr_debug("msk=%p rx queue empty=%d:%d copied=%d", + msk, skb_queue_empty_lockless(&sk->sk_receive_queue), + skb_queue_empty(&msk->receive_queue), copied); if (!(flags & MSG_PEEK)) mptcp_rcv_space_adjust(msk, copied); @@ -2368,7 +2338,6 @@ static void mptcp_check_fastclose(struct mptcp_sock *msk) inet_sk_state_store(sk, TCP_CLOSE); sk->sk_shutdown = SHUTDOWN_MASK; smp_mb__before_atomic(); /* SHUTDOWN must be visible first */ - set_bit(MPTCP_DATA_READY, &msk->flags); set_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags); mptcp_close_wake_up(sk); @@ -3385,8 +3354,14 @@ unlock_fail: static __poll_t mptcp_check_readable(struct mptcp_sock *msk) { - return test_bit(MPTCP_DATA_READY, &msk->flags) ? EPOLLIN | EPOLLRDNORM : - 0; + /* Concurrent splices from sk_receive_queue into receive_queue will + * always show at least one non-empty queue when checked in this order. + */ + if (skb_queue_empty_lockless(&((struct sock *)msk)->sk_receive_queue) && + skb_queue_empty_lockless(&msk->receive_queue)) + return 0; + + return EPOLLIN | EPOLLRDNORM; } static __poll_t mptcp_check_writeable(struct mptcp_sock *msk) @@ -3421,7 +3396,7 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock, state = inet_sk_state_load(sk); pr_debug("msk=%p state=%d flags=%lx", msk, state, msk->flags); if (state == TCP_LISTEN) - return mptcp_check_readable(msk); + return test_bit(MPTCP_DATA_READY, &msk->flags) ? EPOLLIN | EPOLLRDNORM : 0; if (state != TCP_SYN_SENT && state != TCP_SYN_RECV) { mask |= mptcp_check_readable(msk); -- cgit v1.2.3 From 075da584bae2da6a37428d59a477b6bdad430ac3 Mon Sep 17 00:00:00 2001 From: Herve Codina Date: Fri, 8 Oct 2021 12:34:37 +0200 Subject: net: stmmac: fix get_hw_feature() on old hardware Some old IPs do not provide the hardware feature register. On these IPs, this register is read 0x00000000. In old driver version, this feature was handled but a regression came with the commit f10a6a3541b4 ("stmmac: rework get_hw_feature function"). Indeed, this commit removes the return value in dma->get_hw_feature(). This return value was used to indicate the validity of retrieved information and used later on in stmmac_hw_init() to override priv->plat data if this hardware feature were valid. This patch restores the return code in ->get_hw_feature() in order to indicate the hardware feature validity and override priv->plat data only if this hardware feature is valid. Fixes: f10a6a3541b4 ("stmmac: rework get_hw_feature function") Signed-off-by: Herve Codina Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 13 +++++++++++-- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 6 ++++-- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 ++++-- drivers/net/ethernet/stmicro/stmmac/hwif.h | 6 +++--- 4 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 90383abafa66..f5581db0ba9b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -218,11 +218,18 @@ static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space) readl(ioaddr + DMA_BUS_MODE + i * 4); } -static void dwmac1000_get_hw_feature(void __iomem *ioaddr, - struct dma_features *dma_cap) +static int dwmac1000_get_hw_feature(void __iomem *ioaddr, + struct dma_features *dma_cap) { u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE); + if (!hw_cap) { + /* 0x00000000 is the value read on old hardware that does not + * implement this register + */ + return -EOPNOTSUPP; + } + dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL); dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1; dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2; @@ -252,6 +259,8 @@ static void dwmac1000_get_hw_feature(void __iomem *ioaddr, dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22; /* Alternate (enhanced) DESC mode */ dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; + + return 0; } static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 5be8e6a631d9..d99fa028c646 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -347,8 +347,8 @@ static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode, writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel)); } -static void dwmac4_get_hw_feature(void __iomem *ioaddr, - struct dma_features *dma_cap) +static int dwmac4_get_hw_feature(void __iomem *ioaddr, + struct dma_features *dma_cap) { u32 hw_cap = readl(ioaddr + GMAC_HW_FEATURE0); @@ -437,6 +437,8 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr, dma_cap->frpbs = (hw_cap & GMAC_HW_FEAT_FRPBS) >> 11; dma_cap->frpsel = (hw_cap & GMAC_HW_FEAT_FRPSEL) >> 10; dma_cap->dvlan = (hw_cap & GMAC_HW_FEAT_DVLAN) >> 5; + + return 0; } /* Enable/disable TSO feature and set MSS */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index 906e985441a9..5e98355f422b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -371,8 +371,8 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, return ret; } -static void dwxgmac2_get_hw_feature(void __iomem *ioaddr, - struct dma_features *dma_cap) +static int dwxgmac2_get_hw_feature(void __iomem *ioaddr, + struct dma_features *dma_cap) { u32 hw_cap; @@ -445,6 +445,8 @@ static void dwxgmac2_get_hw_feature(void __iomem *ioaddr, dma_cap->frpes = (hw_cap & XGMAC_HWFEAT_FRPES) >> 11; dma_cap->frpbs = (hw_cap & XGMAC_HWFEAT_FRPPB) >> 9; dma_cap->frpsel = (hw_cap & XGMAC_HWFEAT_FRPSEL) >> 3; + + return 0; } static void dwxgmac2_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 queue) diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index 6dc1c98ebec8..fe2660d5694d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -203,8 +203,8 @@ struct stmmac_dma_ops { int (*dma_interrupt) (void __iomem *ioaddr, struct stmmac_extra_stats *x, u32 chan, u32 dir); /* If supported then get the optional core features */ - void (*get_hw_feature)(void __iomem *ioaddr, - struct dma_features *dma_cap); + int (*get_hw_feature)(void __iomem *ioaddr, + struct dma_features *dma_cap); /* Program the HW RX Watchdog */ void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt, u32 queue); void (*set_tx_ring_len)(void __iomem *ioaddr, u32 len, u32 chan); @@ -255,7 +255,7 @@ struct stmmac_dma_ops { #define stmmac_dma_interrupt_status(__priv, __args...) \ stmmac_do_callback(__priv, dma, dma_interrupt, __args) #define stmmac_get_hw_feature(__priv, __args...) \ - stmmac_do_void_callback(__priv, dma, get_hw_feature, __args) + stmmac_do_callback(__priv, dma, get_hw_feature, __args) #define stmmac_rx_watchdog(__priv, __args...) \ stmmac_do_void_callback(__priv, dma, rx_watchdog, __args) #define stmmac_set_tx_ring_len(__priv, __args...) \ -- cgit v1.2.3 From 3781b6ad2ee1b1c3cf8b6523ac22a58f44c2c337 Mon Sep 17 00:00:00 2001 From: Herve Codina Date: Fri, 8 Oct 2021 12:34:38 +0200 Subject: dt-bindings: net: snps,dwmac: add dwmac 3.40a IP version dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 42689b7d03a2..c115c95ee584 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -21,6 +21,7 @@ select: contains: enum: - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a @@ -76,6 +77,7 @@ properties: - rockchip,rk3399-gmac - rockchip,rv1108-gmac - snps,dwmac + - snps,dwmac-3.40a - snps,dwmac-3.50a - snps,dwmac-3.610 - snps,dwmac-3.70a -- cgit v1.2.3 From 9cb1d19f47fafad7dcf7c8564e633440c946cfd7 Mon Sep 17 00:00:00 2001 From: Herve Codina Date: Fri, 8 Oct 2021 12:34:39 +0200 Subject: net: stmmac: add support for dwmac 3.40a dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c | 1 + drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c index fbfda55b4c52..5e731a72cce8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c @@ -71,6 +71,7 @@ err_remove_config_dt: static const struct of_device_id dwmac_generic_match[] = { { .compatible = "st,spear600-gmac"}, + { .compatible = "snps,dwmac-3.40a"}, { .compatible = "snps,dwmac-3.50a"}, { .compatible = "snps,dwmac-3.610"}, { .compatible = "snps,dwmac-3.70a"}, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 62cec9bfcd33..232ac98943cd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -508,6 +508,14 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) plat->pmt = 1; } + if (of_device_is_compatible(np, "snps,dwmac-3.40a")) { + plat->has_gmac = 1; + plat->enh_desc = 1; + plat->tx_coe = 1; + plat->bugged_jumbo = 1; + plat->pmt = 1; + } + if (of_device_is_compatible(np, "snps,dwmac-4.00") || of_device_is_compatible(np, "snps,dwmac-4.10a") || of_device_is_compatible(np, "snps,dwmac-4.20a") || -- cgit v1.2.3 From 6636fec29cdf6665bd219564609e8651f6ddc142 Mon Sep 17 00:00:00 2001 From: Herve Codina Date: Fri, 8 Oct 2021 12:34:40 +0200 Subject: ARM: dts: spear3xx: Fix gmac node On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina Signed-off-by: David S. Miller --- arch/arm/boot/dts/spear3xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index f266b7b03482..cc88ebe7a60c 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -47,7 +47,7 @@ }; gmac: eth@e0800000 { - compatible = "st,spear600-gmac"; + compatible = "snps,dwmac-3.40a"; reg = <0xe0800000 0x8000>; interrupts = <23 22>; interrupt-names = "macirq", "eth_wake_irq"; -- cgit v1.2.3 From 95f7f3e7dc6bd2e735cb5de11734ea2222b1e05a Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Thu, 7 Oct 2021 16:14:40 +0200 Subject: net/smc: improved fix wait on already cleared link Commit 8f3d65c16679 ("net/smc: fix wait on already cleared link") introduced link refcounting to avoid waits on already cleared links. This patch extents and improves the refcounting to cover all remaining possible cases for this kind of error situation. Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_cdc.c | 7 +++++- net/smc/smc_core.c | 20 +++++++++-------- net/smc/smc_llc.c | 63 ++++++++++++++++++++++++++++++++++++++++++------------ net/smc/smc_tx.c | 22 +++++-------------- net/smc/smc_wr.h | 14 ++++++++++++ 5 files changed, 85 insertions(+), 41 deletions(-) diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c index f23f558054a7..99acd337ba90 100644 --- a/net/smc/smc_cdc.c +++ b/net/smc/smc_cdc.c @@ -150,9 +150,11 @@ static int smcr_cdc_get_slot_and_msg_send(struct smc_connection *conn) again: link = conn->lnk; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_cdc_get_free_slot(conn, link, &wr_buf, NULL, &pend); if (rc) - return rc; + goto put_out; spin_lock_bh(&conn->send_lock); if (link != conn->lnk) { @@ -160,6 +162,7 @@ again: spin_unlock_bh(&conn->send_lock); smc_wr_tx_put_slot(link, (struct smc_wr_tx_pend_priv *)pend); + smc_wr_tx_link_put(link); if (again) return -ENOLINK; again = true; @@ -167,6 +170,8 @@ again: } rc = smc_cdc_msg_send(conn, wr_buf, pend); spin_unlock_bh(&conn->send_lock); +put_out: + smc_wr_tx_link_put(link); return rc; } diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 8280c938be80..d2206743dc71 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -949,7 +949,7 @@ struct smc_link *smc_switch_conns(struct smc_link_group *lgr, to_lnk = &lgr->lnk[i]; break; } - if (!to_lnk) { + if (!to_lnk || !smc_wr_tx_link_hold(to_lnk)) { smc_lgr_terminate_sched(lgr); return NULL; } @@ -981,24 +981,26 @@ again: read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); - if (rc) { - smcr_link_down_cond_sched(to_lnk); - return NULL; - } + if (rc) + goto err_out; /* avoid race with smcr_tx_sndbuf_nonempty() */ spin_lock_bh(&conn->send_lock); smc_switch_link_and_count(conn, to_lnk); rc = smc_switch_cursor(smc, pend, wr_buf); spin_unlock_bh(&conn->send_lock); sock_put(&smc->sk); - if (rc) { - smcr_link_down_cond_sched(to_lnk); - return NULL; - } + if (rc) + goto err_out; goto again; } read_unlock_bh(&lgr->conns_lock); + smc_wr_tx_link_put(to_lnk); return to_lnk; + +err_out: + smcr_link_down_cond_sched(to_lnk); + smc_wr_tx_link_put(to_lnk); + return NULL; } static void smcr_buf_unuse(struct smc_buf_desc *rmb_desc, diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index 2e7560eba981..72f4b72eb175 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -383,9 +383,11 @@ int smc_llc_send_confirm_link(struct smc_link *link, struct smc_wr_buf *wr_buf; int rc; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; confllc = (struct smc_llc_msg_confirm_link *)wr_buf; memset(confllc, 0, sizeof(*confllc)); confllc->hd.common.type = SMC_LLC_CONFIRM_LINK; @@ -402,6 +404,8 @@ int smc_llc_send_confirm_link(struct smc_link *link, confllc->max_links = SMC_LLC_ADD_LNK_MAX_LINKS; /* send llc message */ rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); return rc; } @@ -415,9 +419,11 @@ static int smc_llc_send_confirm_rkey(struct smc_link *send_link, struct smc_link *link; int i, rc, rtok_ix; + if (!smc_wr_tx_link_hold(send_link)) + return -ENOLINK; rc = smc_llc_add_pending_send(send_link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; rkeyllc = (struct smc_llc_msg_confirm_rkey *)wr_buf; memset(rkeyllc, 0, sizeof(*rkeyllc)); rkeyllc->hd.common.type = SMC_LLC_CONFIRM_RKEY; @@ -444,6 +450,8 @@ static int smc_llc_send_confirm_rkey(struct smc_link *send_link, (u64)sg_dma_address(rmb_desc->sgt[send_link->link_idx].sgl)); /* send llc message */ rc = smc_wr_tx_send(send_link, pend); +put_out: + smc_wr_tx_link_put(send_link); return rc; } @@ -456,9 +464,11 @@ static int smc_llc_send_delete_rkey(struct smc_link *link, struct smc_wr_buf *wr_buf; int rc; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; rkeyllc = (struct smc_llc_msg_delete_rkey *)wr_buf; memset(rkeyllc, 0, sizeof(*rkeyllc)); rkeyllc->hd.common.type = SMC_LLC_DELETE_RKEY; @@ -467,6 +477,8 @@ static int smc_llc_send_delete_rkey(struct smc_link *link, rkeyllc->rkey[0] = htonl(rmb_desc->mr_rx[link->link_idx]->rkey); /* send llc message */ rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); return rc; } @@ -480,9 +492,11 @@ int smc_llc_send_add_link(struct smc_link *link, u8 mac[], u8 gid[], struct smc_wr_buf *wr_buf; int rc; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; addllc = (struct smc_llc_msg_add_link *)wr_buf; memset(addllc, 0, sizeof(*addllc)); @@ -504,6 +518,8 @@ int smc_llc_send_add_link(struct smc_link *link, u8 mac[], u8 gid[], } /* send llc message */ rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); return rc; } @@ -517,9 +533,11 @@ int smc_llc_send_delete_link(struct smc_link *link, u8 link_del_id, struct smc_wr_buf *wr_buf; int rc; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; delllc = (struct smc_llc_msg_del_link *)wr_buf; memset(delllc, 0, sizeof(*delllc)); @@ -536,6 +554,8 @@ int smc_llc_send_delete_link(struct smc_link *link, u8 link_del_id, delllc->reason = htonl(reason); /* send llc message */ rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); return rc; } @@ -547,9 +567,11 @@ static int smc_llc_send_test_link(struct smc_link *link, u8 user_data[16]) struct smc_wr_buf *wr_buf; int rc; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; testllc = (struct smc_llc_msg_test_link *)wr_buf; memset(testllc, 0, sizeof(*testllc)); testllc->hd.common.type = SMC_LLC_TEST_LINK; @@ -557,6 +579,8 @@ static int smc_llc_send_test_link(struct smc_link *link, u8 user_data[16]) memcpy(testllc->user_data, user_data, sizeof(testllc->user_data)); /* send llc message */ rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); return rc; } @@ -567,13 +591,16 @@ static int smc_llc_send_message(struct smc_link *link, void *llcbuf) struct smc_wr_buf *wr_buf; int rc; - if (!smc_link_usable(link)) + if (!smc_wr_tx_link_hold(link)) return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; memcpy(wr_buf, llcbuf, sizeof(union smc_llc_msg)); - return smc_wr_tx_send(link, pend); + rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); + return rc; } /* schedule an llc send on link, may wait for buffers, @@ -586,13 +613,16 @@ static int smc_llc_send_message_wait(struct smc_link *link, void *llcbuf) struct smc_wr_buf *wr_buf; int rc; - if (!smc_link_usable(link)) + if (!smc_wr_tx_link_hold(link)) return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; memcpy(wr_buf, llcbuf, sizeof(union smc_llc_msg)); - return smc_wr_tx_send_wait(link, pend, SMC_LLC_WAIT_TIME); + rc = smc_wr_tx_send_wait(link, pend, SMC_LLC_WAIT_TIME); +put_out: + smc_wr_tx_link_put(link); + return rc; } /********************************* receive ***********************************/ @@ -672,9 +702,11 @@ static int smc_llc_add_link_cont(struct smc_link *link, struct smc_buf_desc *rmb; u8 n; + if (!smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_llc_add_pending_send(link, &wr_buf, &pend); if (rc) - return rc; + goto put_out; addc_llc = (struct smc_llc_msg_add_link_cont *)wr_buf; memset(addc_llc, 0, sizeof(*addc_llc)); @@ -706,7 +738,10 @@ static int smc_llc_add_link_cont(struct smc_link *link, addc_llc->hd.length = sizeof(struct smc_llc_msg_add_link_cont); if (lgr->role == SMC_CLNT) addc_llc->hd.flags |= SMC_LLC_FLAG_RESP; - return smc_wr_tx_send(link, pend); + rc = smc_wr_tx_send(link, pend); +put_out: + smc_wr_tx_link_put(link); + return rc; } static int smc_llc_cli_rkey_exchange(struct smc_link *link, diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c index c79361dfcdfb..738a4a99c827 100644 --- a/net/smc/smc_tx.c +++ b/net/smc/smc_tx.c @@ -496,7 +496,7 @@ static int smc_tx_rdma_writes(struct smc_connection *conn, /* Wakeup sndbuf consumers from any context (IRQ or process) * since there is more data to transmit; usable snd_wnd as max transmit */ -static int _smcr_tx_sndbuf_nonempty(struct smc_connection *conn) +static int smcr_tx_sndbuf_nonempty(struct smc_connection *conn) { struct smc_cdc_producer_flags *pflags = &conn->local_tx_ctrl.prod_flags; struct smc_link *link = conn->lnk; @@ -505,8 +505,11 @@ static int _smcr_tx_sndbuf_nonempty(struct smc_connection *conn) struct smc_wr_buf *wr_buf; int rc; + if (!link || !smc_wr_tx_link_hold(link)) + return -ENOLINK; rc = smc_cdc_get_free_slot(conn, link, &wr_buf, &wr_rdma_buf, &pend); if (rc < 0) { + smc_wr_tx_link_put(link); if (rc == -EBUSY) { struct smc_sock *smc = container_of(conn, struct smc_sock, conn); @@ -547,22 +550,7 @@ static int _smcr_tx_sndbuf_nonempty(struct smc_connection *conn) out_unlock: spin_unlock_bh(&conn->send_lock); - return rc; -} - -static int smcr_tx_sndbuf_nonempty(struct smc_connection *conn) -{ - struct smc_link *link = conn->lnk; - int rc = -ENOLINK; - - if (!link) - return rc; - - atomic_inc(&link->wr_tx_refcnt); - if (smc_link_usable(link)) - rc = _smcr_tx_sndbuf_nonempty(conn); - if (atomic_dec_and_test(&link->wr_tx_refcnt)) - wake_up_all(&link->wr_tx_wait); + smc_wr_tx_link_put(link); return rc; } diff --git a/net/smc/smc_wr.h b/net/smc/smc_wr.h index 423b8709f1c9..2bc626f230a5 100644 --- a/net/smc/smc_wr.h +++ b/net/smc/smc_wr.h @@ -60,6 +60,20 @@ static inline void smc_wr_tx_set_wr_id(atomic_long_t *wr_tx_id, long val) atomic_long_set(wr_tx_id, val); } +static inline bool smc_wr_tx_link_hold(struct smc_link *link) +{ + if (!smc_link_usable(link)) + return false; + atomic_inc(&link->wr_tx_refcnt); + return true; +} + +static inline void smc_wr_tx_link_put(struct smc_link *link) +{ + if (atomic_dec_and_test(&link->wr_tx_refcnt)) + wake_up_all(&link->wr_tx_wait); +} + static inline void smc_wr_wakeup_tx_wait(struct smc_link *lnk) { wake_up_all(&lnk->wr_tx_wait); -- cgit v1.2.3 From 1b1499a817c90fd1ce9453a2c98d2a01cca0e775 Mon Sep 17 00:00:00 2001 From: Lin Ma Date: Thu, 7 Oct 2021 19:44:30 +0200 Subject: nfc: nci: fix the UAF of rf_conn_info object The nci_core_conn_close_rsp_packet() function will release the conn_info with given conn_id. However, it needs to set the rf_conn_info to NULL to prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger the UAF. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lin Ma Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- net/nfc/nci/rsp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/nfc/nci/rsp.c b/net/nfc/nci/rsp.c index a2e72c003805..b911ab78bed9 100644 --- a/net/nfc/nci/rsp.c +++ b/net/nfc/nci/rsp.c @@ -334,6 +334,8 @@ static void nci_core_conn_close_rsp_packet(struct nci_dev *ndev, ndev->cur_conn_id); if (conn_info) { list_del(&conn_info->list); + if (conn_info == ndev->rf_conn_info) + ndev->rf_conn_info = NULL; devm_kfree(&ndev->nfc_dev->dev, conn_info); } } -- cgit v1.2.3 From 1bec0f05062cf21e78093b1c4a2ae744e2873b8a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 7 Oct 2021 19:47:08 +0300 Subject: net: dsa: fix bridge_num not getting cleared after ports leaving the bridge The dp->bridge_num is zero-based, with -1 being the encoding for an invalid value. But dsa_bridge_num_put used to check for an invalid value by comparing bridge_num with 0, which is of course incorrect. The result is that the bridge_num will never get cleared by dsa_bridge_num_put, and further port joins to other bridges will get a bridge_num larger than the previous one, and once all the available bridges with TX forwarding offload supported by the hardware get exhausted, the TX forwarding offload feature is simply disabled. In the case of sja1105, 7 iterations of the loop below are enough to exhaust the TX forwarding offload bits, and further bridge joins operate without that feature. ip link add br0 type bridge vlan_filtering 1 while :; do ip link set sw0p2 master br0 && sleep 1 ip link set sw0p2 nomaster && sleep 1 done This issue is enough of an indication that having the dp->bridge_num invalid encoding be a negative number is prone to bugs, so this will be changed to a one-based value, with the dp->bridge_num of zero being the indication of no bridge. However, that is material for net-next. Fixes: f5e165e72b29 ("net: dsa: track unique bridge numbers across all DSA switch trees") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- net/dsa/dsa2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index b29262eee00b..6d5cc0217133 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -170,7 +170,7 @@ void dsa_bridge_num_put(const struct net_device *bridge_dev, int bridge_num) /* Check if the bridge is still in use, otherwise it is time * to clean it up so we can reuse this bridge_num later. */ - if (!dsa_bridge_num_find(bridge_dev)) + if (dsa_bridge_num_find(bridge_dev) < 0) clear_bit(bridge_num, &dsa_fwd_offloading_bridges); } -- cgit v1.2.3 From c7709a02c18aabebc3b2988d24661763a0449443 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 7 Oct 2021 19:47:09 +0300 Subject: net: dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0 The present code is structured this way due to an incomplete thought process. In Documentation/networking/switchdev.rst we document that if a bridge is VLAN-unaware, then the presence or lack of a pvid on a bridge port (or on the bridge itself, for that matter) should not affect the ability to receive and transmit tagged or untagged packets. If the bridge on behalf of which we are sending this packet is VLAN-aware, then the TX forwarding offload API ensures that the skb will be VLAN-tagged (if the packet was sent by user space as untagged, it will get transmitted town to the driver as tagged with the bridge device's pvid). But if the bridge is VLAN-unaware, it may or may not be VLAN-tagged. In fact the logic to insert the bridge's PVID came from the idea that we should emulate what is being done in the VLAN-aware case. But we shouldn't. It appears that injecting packets using a VLAN ID of 0 serves the purpose of forwarding the packets to the egress port with no VLAN tag added or stripped by the hardware, and no filtering being performed. So we can simply remove the superfluous logic. One reason why this logic is broken is that when CONFIG_BRIDGE_VLAN_FILTERING=n, we call br_vlan_get_pvid_rcu() but that returns an error and we do error out, dropping all packets on xmit. Not really smart. This is also an issue when the user deletes the bridge pvid: $ bridge vlan del dev br0 vid 1 self As mentioned, in both cases, packets should still flow freely, and they do just that on any net device where the bridge is not offloaded, but on mv88e6xxx they don't. Fixes: d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process") Reported-by: Andrew Lunn Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003155141.2241314-1-andrew@lunn.ch/ Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210928233708.1246774-1-vladimir.oltean@nxp.com/ Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- net/dsa/tag_dsa.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c index e5127b7d1c6a..68d5ddc3ef35 100644 --- a/net/dsa/tag_dsa.c +++ b/net/dsa/tag_dsa.c @@ -129,12 +129,9 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev, u8 tag_dev, tag_port; enum dsa_cmd cmd; u8 *dsa_header; - u16 pvid = 0; - int err; if (skb->offload_fwd_mark) { struct dsa_switch_tree *dst = dp->ds->dst; - struct net_device *br = dp->bridge_dev; cmd = DSA_CMD_FORWARD; @@ -144,19 +141,6 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev, */ tag_dev = dst->last_switch + 1 + dp->bridge_num; tag_port = 0; - - /* If we are offloading forwarding for a VLAN-unaware bridge, - * inject packets to hardware using the bridge's pvid, since - * that's where the packets ingressed from. - */ - if (!br_vlan_enabled(br)) { - /* Safe because __dev_queue_xmit() runs under - * rcu_read_lock_bh() - */ - err = br_vlan_get_pvid_rcu(br, &pvid); - if (err) - return NULL; - } } else { cmd = DSA_CMD_FROM_CPU; tag_dev = dp->ds->index; @@ -188,8 +172,8 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev, dsa_header[0] = (cmd << 6) | tag_dev; dsa_header[1] = tag_port << 3; - dsa_header[2] = pvid >> 8; - dsa_header[3] = pvid & 0xff; + dsa_header[2] = 0; + dsa_header[3] = 0; } return skb; -- cgit v1.2.3 From 8b6836d824702cacf68190982181f8ca3aff9c3e Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 7 Oct 2021 19:47:10 +0300 Subject: net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware The VLAN support in mv88e6xxx has a loaded history. Commit 2ea7a679ca2a ("net: dsa: Don't add vlans when vlan filtering is disabled") noticed some issues with VLAN and decided the best way to deal with them was to make the DSA core ignore VLANs added by the bridge while VLAN awareness is turned off. Those issues were never explained, just presented as "at least one corner case". That approach had problems of its own, presented by commit 54a0ed0df496 ("net: dsa: provide an option for drivers to always receive bridge VLANs") for the DSA core, followed by commit 1fb74191988f ("net: dsa: mv88e6xxx: fix vlan setup") which applied ds->configure_vlan_while_not_filtering = true for mv88e6xxx in particular. We still don't know what corner case Andrew saw when he wrote commit 2ea7a679ca2a ("net: dsa: Don't add vlans when vlan filtering is disabled"), but Tobias now reports that when we use TX forwarding offload, pinging an external station from the bridge device is broken if the front-facing DSA user port has flooding turned off. The full description is in the link below, but for short, when a mv88e6xxx port is under a VLAN-unaware bridge, it inherits that bridge's pvid. So packets ingressing a user port will be classified to e.g. VID 1 (assuming that value for the bridge_default_pvid), whereas when tag_dsa.c xmits towards a user port, it always sends packets using a VID of 0 if that port is standalone or under a VLAN-unaware bridge - or at least it did so prior to commit d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process"). In any case, when there is a conversation between the CPU and a station connected to a user port, the station's MAC address is learned in VID 1 but the CPU tries to transmit through VID 0. The packets reach the intended station, but via flooding and not by virtue of matching the existing ATU entry. DSA has established (and enforced in other drivers: sja1105, felix, mt7530) that a VLAN-unaware port should use a private pvid, and not inherit the one from the bridge. The bridge's pvid should only be inherited when that bridge is VLAN-aware, so all state transitions need to be handled. On the other hand, all bridge VLANs should sit in the VTU starting with the moment when the bridge offloads them via switchdev, they are just not used. This solves the problem that Tobias sees because packets ingressing on VLAN-unaware user ports now get classified to VID 0, which is also the VID used by tag_dsa.c on xmit. Fixes: d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process") Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003222312.284175-2-vladimir.oltean@nxp.com/#24491503 Reported-by: Tobias Waldekranz Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mv88e6xxx/chip.c | 53 +++++++++++++++++++++++++++++++++++----- drivers/net/dsa/mv88e6xxx/chip.h | 6 +++++ drivers/net/dsa/mv88e6xxx/port.c | 21 ++++++++++++++++ drivers/net/dsa/mv88e6xxx/port.h | 2 ++ 4 files changed, 76 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 03744d1c43fc..d672112afffd 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -1677,6 +1677,26 @@ static int mv88e6xxx_port_check_hw_vlan(struct dsa_switch *ds, int port, return 0; } +static int mv88e6xxx_port_commit_pvid(struct mv88e6xxx_chip *chip, int port) +{ + struct dsa_port *dp = dsa_to_port(chip->ds, port); + struct mv88e6xxx_port *p = &chip->ports[port]; + bool drop_untagged = false; + u16 pvid = 0; + int err; + + if (dp->bridge_dev && br_vlan_enabled(dp->bridge_dev)) { + pvid = p->bridge_pvid.vid; + drop_untagged = !p->bridge_pvid.valid; + } + + err = mv88e6xxx_port_set_pvid(chip, port, pvid); + if (err) + return err; + + return mv88e6xxx_port_drop_untagged(chip, port, drop_untagged); +} + static int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, struct netlink_ext_ack *extack) @@ -1690,7 +1710,16 @@ static int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port, return -EOPNOTSUPP; mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_port_set_8021q_mode(chip, port, mode); + if (err) + goto unlock; + + err = mv88e6xxx_port_commit_pvid(chip, port); + if (err) + goto unlock; + +unlock: mv88e6xxx_reg_unlock(chip); return err; @@ -2123,6 +2152,7 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, struct mv88e6xxx_chip *chip = ds->priv; bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + struct mv88e6xxx_port *p = &chip->ports[port]; bool warn; u8 member; int err; @@ -2156,13 +2186,21 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, } if (pvid) { - err = mv88e6xxx_port_set_pvid(chip, port, vlan->vid); - if (err) { - dev_err(ds->dev, "p%d: failed to set PVID %d\n", - port, vlan->vid); + p->bridge_pvid.vid = vlan->vid; + p->bridge_pvid.valid = true; + + err = mv88e6xxx_port_commit_pvid(chip, port); + if (err) + goto out; + } else if (vlan->vid && p->bridge_pvid.vid == vlan->vid) { + /* The old pvid was reinstalled as a non-pvid VLAN */ + p->bridge_pvid.valid = false; + + err = mv88e6xxx_port_commit_pvid(chip, port); + if (err) goto out; - } } + out: mv88e6xxx_reg_unlock(chip); @@ -2212,6 +2250,7 @@ static int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) { struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p = &chip->ports[port]; int err = 0; u16 pvid; @@ -2229,7 +2268,9 @@ static int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port, goto unlock; if (vlan->vid == pvid) { - err = mv88e6xxx_port_set_pvid(chip, port, 0); + p->bridge_pvid.valid = false; + + err = mv88e6xxx_port_commit_pvid(chip, port); if (err) goto unlock; } diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 59f316cc8583..33d067e8396d 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -246,9 +246,15 @@ struct mv88e6xxx_policy { u16 vid; }; +struct mv88e6xxx_vlan { + u16 vid; + bool valid; +}; + struct mv88e6xxx_port { struct mv88e6xxx_chip *chip; int port; + struct mv88e6xxx_vlan bridge_pvid; u64 serdes_stats[2]; u64 atu_member_violation; u64 atu_miss_violation; diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index 451028c57af8..d9817b20ea64 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -1257,6 +1257,27 @@ int mv88e6xxx_port_set_8021q_mode(struct mv88e6xxx_chip *chip, int port, return 0; } +int mv88e6xxx_port_drop_untagged(struct mv88e6xxx_chip *chip, int port, + bool drop_untagged) +{ + u16 old, new; + int err; + + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_CTL2, &old); + if (err) + return err; + + if (drop_untagged) + new = old | MV88E6XXX_PORT_CTL2_DISCARD_UNTAGGED; + else + new = old & ~MV88E6XXX_PORT_CTL2_DISCARD_UNTAGGED; + + if (new == old) + return 0; + + return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL2, new); +} + int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port) { u16 reg; diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index b10e5aebacf6..03382b66f800 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -423,6 +423,8 @@ int mv88e6393x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, phy_interface_t mode); int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode); int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode); +int mv88e6xxx_port_drop_untagged(struct mv88e6xxx_chip *chip, int port, + bool drop_untagged); int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port); int mv88e6095_port_set_upstream_port(struct mv88e6xxx_chip *chip, int port, int upstream_port); -- cgit v1.2.3 From 5bded8259ee3815a91791462dfb3312480779c3d Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 7 Oct 2021 19:47:11 +0300 Subject: net: dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports Similar to commit 6087175b7991 ("net: dsa: mt7530: use independent VLAN learning on VLAN-unaware bridges"), software forwarding between an unoffloaded LAG port (a bonding interface with an unsupported policy) and a mv88e6xxx user port directly under a bridge is broken. We adopt the same strategy, which is to make the standalone ports not find any ATU entry learned on a bridge port. Theory: the mv88e6xxx ATU is looked up by FID and MAC address. There are as many FIDs as VIDs (4096). The FID is derived from the VID when possible (the VTU maps a VID to a FID), with a fallback to the port based default FID value when not (802.1Q Mode is disabled on the port, or the classified VID isn't present in the VTU). The mv88e6xxx driver makes the following use of FIDs and VIDs: - the port's DefaultVID (to which untagged & pvid-tagged packets get classified) is 0 and is absent from the VTU, so this kind of packets is processed in FID 0, the default FID assigned by mv88e6xxx_setup_port. - every time a bridge VLAN is created, mv88e6xxx_port_vlan_join() -> mv88e6xxx_atu_new() associates a FID with that VID which increases linearly starting from 1. Like this: bridge vlan add dev lan0 vid 100 # FID 1 bridge vlan add dev lan1 vid 100 # still FID 1 bridge vlan add dev lan2 vid 1024 # FID 2 The FID allocation made by the driver is sub-optimal for the following reasons: (a) A standalone port has a DefaultPVID of 0 and a default FID of 0 too. A VLAN-unaware bridged port has a DefaultPVID of 0 and a default FID of 0 too. The difference is that the bridged ports may learn ATU entries, while the standalone port has the requirement that it must not, and must not find them either. Standalone ports must not use the same FID as ports belonging to a bridge. All standalone ports can use the same FID, since the ATU will never have an entry in that FID. (b) Multiple VLAN-unaware bridges will all use a DefaultPVID of 0 and a default FID of 0 on all their ports. The FDBs will not be isolated between these bridges. Every VLAN-unaware bridge must use the same FID on all its ports, different from the FID of other bridge ports. (c) Each bridge VLAN uses a unique FID which is useful for Independent VLAN Learning, but the same VLAN ID on multiple VLAN-aware bridges will result in the same FID being used by mv88e6xxx_atu_new(). The correct behavior is for VLAN 1 in br0 to have a different FID compared to VLAN 1 in br1. This patch cannot fix all the above. Traditionally the DSA framework did not care about this, and the reality is that DSA core involvement is needed for the aforementioned issues to be solved. The only thing we can solve here is an issue which does not require API changes, and that is issue (a), aka use a different FID for standalone ports vs ports under VLAN-unaware bridges. The first step is deciding what VID and FID to use for standalone ports, and what VID and FID for bridged ports. The 0/0 pair for standalone ports is what they used up till now, let's keep using that. For bridged ports, there are 2 cases: - VLAN-aware ports will never end up using the port default FID, because packets will always be classified to a VID in the VTU or dropped otherwise. The FID is the one associated with the VID in the VTU. - On VLAN-unaware ports, we _could_ leave their DefaultVID (pvid) at zero (just as in the case of standalone ports), and just change the port's default FID from 0 to a different number (say 1). However, Tobias points out that there is one more requirement to cater to: cross-chip bridging. The Marvell DSA header does not carry the FID in it, only the VID. So once a packet crosses a DSA link, if it has a VID of zero it will get classified to the default FID of that cascade port. Relying on a port default FID for upstream cascade ports results in contradictions: a default FID of 0 breaks ATU isolation of bridged ports on the downstream switch, a default FID of 1 breaks standalone ports on the downstream switch. So not only must standalone ports have different FIDs compared to bridged ports, they must also have different DefaultVID values. IEEE 802.1Q defines two reserved VID values: 0 and 4095. So we simply choose 4095 as the DefaultVID of ports belonging to VLAN-unaware bridges, and VID 4095 maps to FID 1. For the xmit operation to look up the same ATU database, we need to put VID 4095 in DSA tags sent to ports belonging to VLAN-unaware bridges too. All shared ports are configured to map this VID to the bridging FID, because they are members of that VLAN in the VTU. Shared ports don't need to have 802.1QMode enabled in any way, they always parse the VID from the DSA header, they don't need to look at the 802.1Q header. We install VID 4095 to the VTU in mv88e6xxx_setup_port(), with the mention that mv88e6xxx_vtu_setup() which was located right below that call was flushing the VTU so those entries wouldn't be preserved. So we need to relocate the VTU flushing prior to the port initialization during ->setup(). Also note that this is why it is safe to assume that VID 4095 will get associated with FID 1: the user ports haven't been created, so there is no avenue for the user to create a bridge VLAN which could otherwise race with the creation of another FID which would otherwise use up the non-reserved FID value of 1. [ Currently mv88e6xxx_port_vlan_join() doesn't have the option of specifying a preferred FID, it always calls mv88e6xxx_atu_new(). ] mv88e6xxx_port_db_load_purge() is the function to access the ATU for FDB/MDB entries, and it used to determine the FID to use for VLAN-unaware FDB entries (VID=0) using mv88e6xxx_port_get_fid(). But the driver only called mv88e6xxx_port_set_fid() once, during probe, so no surprises, the port FID was always 0, the call to get_fid() was redundant. As much as I would have wanted to not touch that code, the logic is broken when we add a new FID which is not the port-based default. Now the port-based default FID only corresponds to standalone ports, and FDB/MDB entries belong to the bridging service. So while in the future, when the DSA API will support FDB isolation, we will have to figure out the FID based on the bridge number, for now there's a single bridging FID, so hardcode that. Lastly, the tagger needs to check, when it is transmitting a VLAN untagged skb, whether it is sending it towards a bridged or a standalone port. When we see it is bridged we assume the bridge is VLAN-unaware. Not because it cannot be VLAN-aware but: - if we are transmitting from a VLAN-aware bridge we are likely doing so using TX forwarding offload. That code path guarantees that skbs have a vlan hwaccel tag in them, so we would not enter the "else" branch of the "if (skb->protocol == htons(ETH_P_8021Q))" condition. - if we are transmitting on behalf of a VLAN-aware bridge but with no TX forwarding offload (no PVT support, out of space in the PVT, whatever), we would indeed be transmitting with VLAN 4095 instead of the bridge device's pvid. However we would be injecting a "From CPU" frame, and the switch won't learn from that - it only learns from "Forward" frames. So it is inconsequential for address learning. And VLAN 4095 is absolutely enough for the frame to exit the switch, since we never remove that VLAN from any port. Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support") Reported-by: Tobias Waldekranz Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- MAINTAINERS | 1 + drivers/net/dsa/mv88e6xxx/chip.c | 67 ++++++++++++++++++++++++++++++++-------- drivers/net/dsa/mv88e6xxx/chip.h | 3 ++ include/linux/dsa/mv88e6xxx.h | 13 ++++++++ net/dsa/tag_dsa.c | 12 +++++-- 5 files changed, 80 insertions(+), 16 deletions(-) create mode 100644 include/linux/dsa/mv88e6xxx.h diff --git a/MAINTAINERS b/MAINTAINERS index a4a0c2baaf27..17f652b2f653 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11153,6 +11153,7 @@ S: Maintained F: Documentation/devicetree/bindings/net/dsa/marvell.txt F: Documentation/networking/devlink/mv88e6xxx.rst F: drivers/net/dsa/mv88e6xxx/ +F: include/linux/dsa/mv88e6xxx.h F: include/linux/platform_data/mv88e6xxx.h MARVELL ARMADA 3700 PHY DRIVERS diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d672112afffd..d7b29792732b 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -1681,13 +1682,17 @@ static int mv88e6xxx_port_commit_pvid(struct mv88e6xxx_chip *chip, int port) { struct dsa_port *dp = dsa_to_port(chip->ds, port); struct mv88e6xxx_port *p = &chip->ports[port]; + u16 pvid = MV88E6XXX_VID_STANDALONE; bool drop_untagged = false; - u16 pvid = 0; int err; - if (dp->bridge_dev && br_vlan_enabled(dp->bridge_dev)) { - pvid = p->bridge_pvid.vid; - drop_untagged = !p->bridge_pvid.valid; + if (dp->bridge_dev) { + if (br_vlan_enabled(dp->bridge_dev)) { + pvid = p->bridge_pvid.vid; + drop_untagged = !p->bridge_pvid.valid; + } else { + pvid = MV88E6XXX_VID_BRIDGED; + } } err = mv88e6xxx_port_set_pvid(chip, port, pvid); @@ -1754,11 +1759,15 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, u16 fid; int err; - /* Null VLAN ID corresponds to the port private database */ + /* Ports have two private address databases: one for when the port is + * standalone and one for when the port is under a bridge and the + * 802.1Q mode is disabled. When the port is standalone, DSA wants its + * address database to remain 100% empty, so we never load an ATU entry + * into a standalone port's database. Therefore, translate the null + * VLAN ID into the port's database used for VLAN-unaware bridging. + */ if (vid == 0) { - err = mv88e6xxx_port_get_fid(chip, port, &fid); - if (err) - return err; + fid = MV88E6XXX_FID_BRIDGED; } else { err = mv88e6xxx_vtu_get(chip, vid, &vlan); if (err) @@ -2434,7 +2443,16 @@ static int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, int err; mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_bridge_map(chip, br); + if (err) + goto unlock; + + err = mv88e6xxx_port_commit_pvid(chip, port); + if (err) + goto unlock; + +unlock: mv88e6xxx_reg_unlock(chip); return err; @@ -2444,11 +2462,20 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) { struct mv88e6xxx_chip *chip = ds->priv; + int err; mv88e6xxx_reg_lock(chip); + if (mv88e6xxx_bridge_map(chip, br) || mv88e6xxx_port_vlan_map(chip, port)) dev_err(ds->dev, "failed to remap in-chip Port VLAN\n"); + + err = mv88e6xxx_port_commit_pvid(chip, port); + if (err) + dev_err(ds->dev, + "port %d failed to restore standalone pvid: %pe\n", + port, ERR_PTR(err)); + mv88e6xxx_reg_unlock(chip); } @@ -2894,6 +2921,20 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) if (err) return err; + /* Associate MV88E6XXX_VID_BRIDGED with MV88E6XXX_FID_BRIDGED in the + * ATU by virtue of the fact that mv88e6xxx_atu_new() will pick it as + * the first free FID after MV88E6XXX_FID_STANDALONE. This will be used + * as the private PVID on ports under a VLAN-unaware bridge. + * Shared (DSA and CPU) ports must also be members of it, to translate + * the VID from the DSA tag into MV88E6XXX_FID_BRIDGED, instead of + * relying on their port default FID. + */ + err = mv88e6xxx_port_vlan_join(chip, port, MV88E6XXX_VID_BRIDGED, + MV88E6XXX_G1_VTU_DATA_MEMBER_TAG_UNTAGGED, + false); + if (err) + return err; + if (chip->info->ops->port_set_jumbo_size) { err = chip->info->ops->port_set_jumbo_size(chip, port, 10218); if (err) @@ -2966,7 +3007,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) * database, and allow bidirectional communication between the * CPU and DSA port(s), and the other ports. */ - err = mv88e6xxx_port_set_fid(chip, port, 0); + err = mv88e6xxx_port_set_fid(chip, port, MV88E6XXX_FID_STANDALONE); if (err) return err; @@ -3156,6 +3197,10 @@ static int mv88e6xxx_setup(struct dsa_switch *ds) } } + err = mv88e6xxx_vtu_setup(chip); + if (err) + goto unlock; + /* Setup Switch Port Registers */ for (i = 0; i < mv88e6xxx_num_ports(chip); i++) { if (dsa_is_unused_port(ds, i)) @@ -3185,10 +3230,6 @@ static int mv88e6xxx_setup(struct dsa_switch *ds) if (err) goto unlock; - err = mv88e6xxx_vtu_setup(chip); - if (err) - goto unlock; - err = mv88e6xxx_pvt_setup(chip); if (err) goto unlock; diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 33d067e8396d..8271b8aa7b71 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -21,6 +21,9 @@ #define EDSA_HLEN 8 #define MV88E6XXX_N_FID 4096 +#define MV88E6XXX_FID_STANDALONE 0 +#define MV88E6XXX_FID_BRIDGED 1 + /* PVT limits for 4-bit port and 5-bit switch */ #define MV88E6XXX_MAX_PVT_SWITCHES 32 #define MV88E6XXX_MAX_PVT_PORTS 16 diff --git a/include/linux/dsa/mv88e6xxx.h b/include/linux/dsa/mv88e6xxx.h new file mode 100644 index 000000000000..8c3d45eca46b --- /dev/null +++ b/include/linux/dsa/mv88e6xxx.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright 2021 NXP + */ + +#ifndef _NET_DSA_TAG_MV88E6XXX_H +#define _NET_DSA_TAG_MV88E6XXX_H + +#include + +#define MV88E6XXX_VID_STANDALONE 0 +#define MV88E6XXX_VID_BRIDGED (VLAN_N_VID - 1) + +#endif diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c index 68d5ddc3ef35..b3da4b2ea11c 100644 --- a/net/dsa/tag_dsa.c +++ b/net/dsa/tag_dsa.c @@ -45,6 +45,7 @@ * 6 6 2 2 4 2 N */ +#include #include #include #include @@ -164,16 +165,21 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev, dsa_header[2] &= ~0x10; } } else { + struct net_device *br = dp->bridge_dev; + u16 vid; + + vid = br ? MV88E6XXX_VID_BRIDGED : MV88E6XXX_VID_STANDALONE; + skb_push(skb, DSA_HLEN + extra); dsa_alloc_etype_header(skb, DSA_HLEN + extra); - /* Construct untagged DSA tag. */ + /* Construct DSA header from untagged frame. */ dsa_header = dsa_etype_header_pos_tx(skb) + extra; dsa_header[0] = (cmd << 6) | tag_dev; dsa_header[1] = tag_port << 3; - dsa_header[2] = 0; - dsa_header[3] = 0; + dsa_header[2] = vid >> 8; + dsa_header[3] = vid & 0xff; } return skb; -- cgit v1.2.3 From 14132690860e4d06aa3e1c4d7d8e9866ba7756dd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 7 Oct 2021 19:49:57 +0200 Subject: mqprio: Correct stats in mqprio_dump_class_stats(). Introduction of lockless subqueues broke the class statistics. Before the change stats were accumulated in `bstats' and `qstats' on the stack which was then copied to struct gnet_dump. After the change the `bstats' and `qstats' are initialized to 0 and never updated, yet still fed to gnet_dump. The code updates the global qdisc->cpu_bstats and qdisc->cpu_qstats instead, clobbering them. Most likely a copy-paste error from the code in mqprio_dump(). __gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate the values for per-CPU case but for global stats they overwrite the value, so only stats from the last loop iteration / tc end up in sch->[bq]stats. Use the on-stack [bq]stats variables again and add the stats manually in the global case. Fixes: ce679e8df7ed2 ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Cc: John Fastabend Signed-off-by: Sebastian Andrzej Siewior https://lore.kernel.org/all/20211007175000.2334713-2-bigeasy@linutronix.de/ Signed-off-by: Jakub Kicinski --- net/sched/sch_mqprio.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c index 8766ab5b8788..5eb3b1b7ae5e 100644 --- a/net/sched/sch_mqprio.c +++ b/net/sched/sch_mqprio.c @@ -529,22 +529,28 @@ static int mqprio_dump_class_stats(struct Qdisc *sch, unsigned long cl, for (i = tc.offset; i < tc.offset + tc.count; i++) { struct netdev_queue *q = netdev_get_tx_queue(dev, i); struct Qdisc *qdisc = rtnl_dereference(q->qdisc); - struct gnet_stats_basic_cpu __percpu *cpu_bstats = NULL; - struct gnet_stats_queue __percpu *cpu_qstats = NULL; spin_lock_bh(qdisc_lock(qdisc)); + if (qdisc_is_percpu_stats(qdisc)) { - cpu_bstats = qdisc->cpu_bstats; - cpu_qstats = qdisc->cpu_qstats; + qlen = qdisc_qlen_sum(qdisc); + + __gnet_stats_copy_basic(NULL, &bstats, + qdisc->cpu_bstats, + &qdisc->bstats); + __gnet_stats_copy_queue(&qstats, + qdisc->cpu_qstats, + &qdisc->qstats, + qlen); + } else { + qlen += qdisc->q.qlen; + bstats.bytes += qdisc->bstats.bytes; + bstats.packets += qdisc->bstats.packets; + qstats.backlog += qdisc->qstats.backlog; + qstats.drops += qdisc->qstats.drops; + qstats.requeues += qdisc->qstats.requeues; + qstats.overlimits += qdisc->qstats.overlimits; } - - qlen = qdisc_qlen_sum(qdisc); - __gnet_stats_copy_basic(NULL, &sch->bstats, - cpu_bstats, &qdisc->bstats); - __gnet_stats_copy_queue(&sch->qstats, - cpu_qstats, - &qdisc->qstats, - qlen); spin_unlock_bh(qdisc_lock(qdisc)); } -- cgit v1.2.3 From 1f3e2e97c003f80c4b087092b225c8787ff91e4d Mon Sep 17 00:00:00 2001 From: Xiaolong Huang Date: Fri, 8 Oct 2021 14:58:30 +0800 Subject: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by: Xiaolong Huang Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by: Jakub Kicinski --- drivers/isdn/capi/kcapi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index cb0afe897162..7313454e403a 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -480,6 +480,11 @@ int detach_capi_ctr(struct capi_ctr *ctr) ctr_down(ctr, CAPI_CTR_DETACHED); + if (ctr->cnr < 1 || ctr->cnr - 1 >= CAPI_MAXCONTR) { + err = -EINVAL; + goto unlock_out; + } + if (capi_controller[ctr->cnr - 1] != ctr) { err = -EINVAL; goto unlock_out; -- cgit v1.2.3 From be0499369d6376e70b5b80bbced94c0c32d508b1 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 8 Oct 2021 06:11:31 -0700 Subject: net: mana: Fix error handling in mana_create_rxq() Fix error handling in mana_create_rxq() when cq->gdma_id >= gc->max_num_cqs. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang Link: https://lore.kernel.org/r/1633698691-31721-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/microsoft/mana/mana_en.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c index 1b21030308e5..030ae89f3a33 100644 --- a/drivers/net/ethernet/microsoft/mana/mana_en.c +++ b/drivers/net/ethernet/microsoft/mana/mana_en.c @@ -1477,8 +1477,10 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc, if (err) goto out; - if (cq->gdma_id >= gc->max_num_cqs) + if (WARN_ON(cq->gdma_id >= gc->max_num_cqs)) { + err = -EINVAL; goto out; + } gc->cq_table[cq->gdma_id] = cq->gdma_cq; -- cgit v1.2.3 From 5c976a56570f29aaf4a2f9a1bf99789c252183c9 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Fri, 8 Oct 2021 12:38:01 -0700 Subject: ionic: don't remove netdev->dev_addr when syncing uc list Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index ccf3ffcd3939..7f3322ce044c 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1379,6 +1379,10 @@ static int ionic_addr_add(struct net_device *netdev, const u8 *addr) static int ionic_addr_del(struct net_device *netdev, const u8 *addr) { + /* Don't delete our own address from the uc list */ + if (ether_addr_equal(addr, netdev->dev_addr)) + return 0; + return ionic_lif_list_addr(netdev_priv(netdev), addr, DEL_ADDR); } -- cgit v1.2.3 From 6510e80a0b81b5d814e3aea6297ba42f5e76f73c Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Sat, 9 Oct 2021 11:33:49 +0000 Subject: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/netjet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index 2a1ddd47a096..a52f275f8263 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -949,8 +949,8 @@ nj_release(struct tiger_hw *card) nj_disable_hwirq(card); mode_tiger(&card->bc[0], ISDN_P_NONE); mode_tiger(&card->bc[1], ISDN_P_NONE); - card->isac.release(&card->isac); spin_unlock_irqrestore(&card->lock, flags); + card->isac.release(&card->isac); release_region(card->base, card->base_s); card->base_s = 0; } -- cgit v1.2.3 From 1951b3f19cfe822709c890a337906823c223c7c3 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 9 Oct 2021 15:26:07 +0300 Subject: net: dsa: hold rtnl_lock in dsa_switch_setup_tag_protocol It was a documented fact that ds->ops->change_tag_protocol() offered rtnetlink mutex protection to the switch driver, since there was an ASSERT_RTNL right before the call in dsa_switch_change_tag_proto() (initiated from sysfs). The blamed commit introduced another call path for ds->ops->change_tag_protocol() which does not hold the rtnl_mutex. This is: dsa_tree_setup -> dsa_tree_setup_switches -> dsa_switch_setup -> dsa_switch_setup_tag_protocol -> ds->ops->change_tag_protocol() -> dsa_port_setup -> dsa_slave_create -> register_netdevice(slave_dev) -> dsa_tree_setup_master -> dsa_master_setup -> dev->dsa_ptr = cpu_dp The reason why the rtnl_mutex is held in the sysfs call path is to ensure that, once the master and all the DSA interfaces are down (which is required so that no packets flow), they remain down during the tagging protocol change. The above calling order illustrates the fact that it should not be risky to change the initial tagging protocol to the one specified in the device tree at the given time: - packets cannot enter the dsa_switch_rcv() packet type handler since netdev_uses_dsa() for the master will not yet return true, since dev->dsa_ptr has not yet been populated - packets cannot enter the dsa_slave_xmit() function because no DSA interface has yet been registered So from the DSA core's perspective, holding the rtnl_mutex is indeed not necessary. Yet, drivers may need to do things which need rtnl_mutex protection. For example: felix_set_tag_protocol -> felix_setup_tag_8021q -> dsa_tag_8021q_register -> dsa_tag_8021q_setup -> dsa_tag_8021q_port_setup -> vlan_vid_add -> ASSERT_RTNL These drivers do not really have a choice to take the rtnl_mutex themselves, since in the sysfs case, the rtnl_mutex is already held. Fixes: deff710703d8 ("net: dsa: Allow default tag protocol to be overridden from DT") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index 6d5cc0217133..da18094b5a04 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -811,7 +811,9 @@ static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) if (!dsa_is_cpu_port(ds, port)) continue; + rtnl_lock(); err = ds->ops->change_tag_protocol(ds, port, tag_ops->proto); + rtnl_unlock(); if (err) { dev_err(ds->dev, "Unable to use tag protocol \"%s\": %pe\n", tag_ops->name, ERR_PTR(err)); -- cgit v1.2.3 From a5a14ea7b4e55604acb0dc9d88fdb4cb6945bc77 Mon Sep 17 00:00:00 2001 From: chongjiapeng Date: Sat, 9 Oct 2021 16:09:26 +0800 Subject: qed: Fix missing error code in qed_slowpath_start() The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by: Abaci Robot Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Signed-off-by: chongjiapeng Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 15ef59aa34ff..d10e1cd6d2ba 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1299,6 +1299,7 @@ static int qed_slowpath_start(struct qed_dev *cdev, } else { DP_NOTICE(cdev, "Failed to acquire PTT for aRFS\n"); + rc = -EINVAL; goto err; } } -- cgit v1.2.3 From f49823939e41121fdffada4d583e3e38d28336f9 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 8 Oct 2021 14:42:52 -0700 Subject: net: phy: Do not shutdown PHYs in READY state In case a PHY device was probed thus in the PHY_READY state, but not configured and with no network device attached yet, we should not be trying to shut it down because it has been brought back into reset by phy_device_reset() towards the end of phy_probe() and anyway we have not configured the PHY yet. Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index ba5ad86ec826..4f9990b47a37 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -3125,6 +3125,9 @@ static void phy_shutdown(struct device *dev) { struct phy_device *phydev = to_phy_device(dev); + if (phydev->state == PHY_READY || !phydev->attached_dev) + return; + phy_disable_interrupts(phydev); } -- cgit v1.2.3 From 732b74d647048668f0f8dc0c848f0746c69e2e2f Mon Sep 17 00:00:00 2001 From: Xuan Zhuo Date: Sat, 9 Oct 2021 05:17:53 -0400 Subject: virtio-net: fix for skb_over_panic inside big mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 126285651b7f ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") accidentally reverted the effect of commit 1a8024239da ("virtio-net: fix for skb_over_panic inside big mode") on drivers/net/virtio_net.c As a result, users of crosvm (which is using large packet mode) are experiencing crashes with 5.14-rc1 and above that do not occur with 5.13. Crash trace: [ 61.346677] skbuff: skb_over_panic: text:ffffffff881ae2c7 len:3762 put:3762 head:ffff8a5ec8c22000 data:ffff8a5ec8c22010 tail:0xec2 end:0xec0 dev: [ 61.369192] kernel BUG at net/core/skbuff.c:111! [ 61.372840] invalid opcode: 0000 [#1] SMP PTI [ 61.374892] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.14.0-rc1 linux-v5.14-rc1-for-mesa-ci.tar.bz2 #1 [ 61.376450] Hardware name: ChromiumOS crosvm, BIOS 0 .. [ 61.393635] Call Trace: [ 61.394127] [ 61.394488] skb_put.cold+0x10/0x10 [ 61.395095] page_to_skb+0xf7/0x410 [ 61.395689] receive_buf+0x81/0x1660 [ 61.396228] ? netif_receive_skb_list_internal+0x1ad/0x2b0 [ 61.397180] ? napi_gro_flush+0x97/0xe0 [ 61.397896] ? detach_buf_split+0x67/0x120 [ 61.398573] virtnet_poll+0x2cf/0x420 [ 61.399197] __napi_poll+0x25/0x150 [ 61.399764] net_rx_action+0x22f/0x280 [ 61.400394] __do_softirq+0xba/0x257 [ 61.401012] irq_exit_rcu+0x8e/0xb0 [ 61.401618] common_interrupt+0x7b/0xa0 [ 61.402270] See https://lore.kernel.org/r/5edaa2b7c2fe4abd0347b8454b2ac032b6694e2c.camel%40collabora.com for the report. Apply the original 1a8024239da ("virtio-net: fix for skb_over_panic inside big mode") again, the original logic still holds: In virtio-net's large packet mode, there is a hole in the space behind buf. hdr_padded_len - hdr_len We must take this into account when calculating tailroom. Cc: Greg KH Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Fixes: 126285651b7f ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Xuan Zhuo Reported-by: Corentin Noël Tested-by: Corentin Noël Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 79bd2585ec6b..4ad25a8b0870 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -406,7 +406,7 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi, * add_recvbuf_mergeable() + get_mergeable_buf_len() */ truesize = headroom ? PAGE_SIZE : truesize; - tailroom = truesize - len - headroom; + tailroom = truesize - len - headroom - (hdr_padded_len - hdr_len); buf = p - headroom; len -= hdr_len; -- cgit v1.2.3 From 64570fbc14f8d7cb3fe3995f20e26bc25ce4b2cc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 Oct 2021 17:01:59 -0700 Subject: Linux 5.15-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7b74223d1309..4d0c0ed9236e 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit v1.2.3 From 6675880fc4b7c5137a2640b0725505c21b1ac525 Mon Sep 17 00:00:00 2001 From: Vamshi K Sthambamkadi Date: Fri, 8 Oct 2021 12:48:06 +0530 Subject: tracing: Fix memory leak in eprobe_register() kmemleak report: unreferenced object 0xffff900a70ec7ec0 (size 32): comm "ftracetest", pid 2770, jiffies 4295042510 (age 311.464s) hex dump (first 32 bytes): c8 31 23 45 0a 90 ff ff 40 85 c7 6e 0a 90 ff ff .1#E....@..n.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009d3751fd>] kmem_cache_alloc_trace+0x2a2/0x440 [<0000000088b8124b>] eprobe_register+0x1e3/0x350 [<000000002a9a0517>] __ftrace_event_enable_disable+0x7c/0x240 [<0000000019109321>] event_enable_write+0x93/0xe0 [<000000007d85b320>] vfs_write+0xb9/0x260 [<00000000b94c5e41>] ksys_write+0x67/0xe0 [<000000005a08c81d>] __x64_sys_write+0x1a/0x20 [<00000000240bf576>] do_syscall_64+0x3b/0xc0 [<0000000043d5d9f6>] entry_SYSCALL_64_after_hwframe+0x44/0xae unreferenced object 0xffff900a56bbf280 (size 128): comm "ftracetest", pid 2770, jiffies 4295042510 (age 311.464s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff 00 00 00 00 01 00 00 00 ................ 80 69 3b b2 ff ff ff ff 20 69 3b b2 ff ff ff ff .i;..... i;..... backtrace: [<000000009d3751fd>] kmem_cache_alloc_trace+0x2a2/0x440 [<00000000c4e90fad>] eprobe_register+0x1fc/0x350 [<000000002a9a0517>] __ftrace_event_enable_disable+0x7c/0x240 [<0000000019109321>] event_enable_write+0x93/0xe0 [<000000007d85b320>] vfs_write+0xb9/0x260 [<00000000b94c5e41>] ksys_write+0x67/0xe0 [<000000005a08c81d>] __x64_sys_write+0x1a/0x20 [<00000000240bf576>] do_syscall_64+0x3b/0xc0 [<0000000043d5d9f6>] entry_SYSCALL_64_after_hwframe+0x44/0xae In new_eprobe_trigger(), allocated edata and trigger variables are never freed. To fix, free memory in disable_eprobe(). Link: https://lkml.kernel.org/r/20211008071802.GA2098@cosmos Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Vamshi K Sthambamkadi Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_eprobe.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/trace/trace_eprobe.c b/kernel/trace/trace_eprobe.c index 3044b762cbd7..570d081929fb 100644 --- a/kernel/trace/trace_eprobe.c +++ b/kernel/trace/trace_eprobe.c @@ -632,6 +632,13 @@ static int disable_eprobe(struct trace_eprobe *ep, trace_event_trigger_enable_disable(file, 0); update_cond_flag(file); + + /* Make sure nothing is using the edata or trigger */ + tracepoint_synchronize_unregister(); + + kfree(edata); + kfree(trigger); + return 0; } -- cgit v1.2.3 From 1ae43851b18afe861120ebd7c426dc44f06bb2bd Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 16 Sep 2021 15:23:12 +0900 Subject: bootconfig: init: Fix memblock leak in xbc_make_cmdline() Free unused memblock in a error case to fix memblock leak in xbc_make_cmdline(). Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2 Fixes: 51887d03aca1 ("bootconfig: init: Allow admin to use bootconfig for kernel command line") Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- init/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/init/main.c b/init/main.c index 81a79a77db46..3c4054a95545 100644 --- a/init/main.c +++ b/init/main.c @@ -382,6 +382,7 @@ static char * __init xbc_make_cmdline(const char *key) ret = xbc_snprint_cmdline(new_cmdline, len + 1, root); if (ret < 0 || ret > len) { pr_err("Failed to print extra kernel cmdline.\n"); + memblock_free_ptr(new_cmdline, len + 1); return NULL; } -- cgit v1.2.3 From b26503b15631229583e925de774e95b11d8144e8 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 6 Oct 2021 18:28:30 +0100 Subject: tracing: Fix missing * in comment block There is a missing * in a comment block, add it in. Link: https://lkml.kernel.org/r/20211006172830.1025336-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_hist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index a6061a69aa84..f01e442716e2 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -2506,7 +2506,7 @@ find_synthetic_field_var(struct hist_trigger_data *target_hist_data, * events. However, for convenience, users are allowed to directly * specify an event field in an action, which will be automatically * converted into a variable on their behalf. - + * * If a user specifies a field on an event that isn't the event the * histogram currently being defined (the target event histogram), the * only way that can be accomplished is if a new hist trigger is -- cgit v1.2.3 From a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 Mon Sep 17 00:00:00 2001 From: Jonathan Bell Date: Fri, 8 Oct 2021 12:25:43 +0300 Subject: xhci: guard accesses to ep_state in xhci_endpoint_reset() See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 93c38b557afd..541fe4dcc43a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3214,10 +3214,13 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; /* Bail out if toggle is already being cleared by a endpoint reset */ + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); return; } + spin_unlock_irqrestore(&xhci->lock, flags); /* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */ if (usb_endpoint_xfer_control(&host_ep->desc) || usb_endpoint_xfer_isoc(&host_ep->desc)) @@ -3303,8 +3306,10 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, xhci_free_command(xhci, cfg_cmd); cleanup: xhci_free_command(xhci, stop_cmd); + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE) ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, -- cgit v1.2.3 From 5255660b208aebfdb71d574f3952cf48392f4306 Mon Sep 17 00:00:00 2001 From: Jonathan Bell Date: Fri, 8 Oct 2021 12:25:44 +0300 Subject: xhci: add quirk for host controllers that don't update endpoint DCS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints at least, if the xHC halts on a particular TRB due to an error then the DCS field in the Out Endpoint Context maintained by the hardware is not updated with the current cycle state. Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit from the TRB that the xHC stopped on. [ bjorn: rebased to v5.14-rc2 ] Link: https://github.com/raspberrypi/linux/issues/3060 Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell Signed-off-by: Bjørn Mork Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211008092547.3996295-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +++- drivers/usb/host/xhci-ring.c | 25 ++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 3 files changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2c9f25ca8edd..633413d78380 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -279,8 +279,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; + } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e676749f543b..7dbd26a9bc24 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -559,8 +559,11 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; struct xhci_command *cmd; struct xhci_segment *new_seg; + struct xhci_segment *halted_seg = NULL; union xhci_trb *new_deq; int new_cycle; + union xhci_trb *halted_trb; + int index = 0; dma_addr_t addr; u64 hw_dequeue; bool cycle_found = false; @@ -598,7 +601,27 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - new_cycle = hw_dequeue & 0x1; + + /* + * Quirk: xHC write-back of the DCS field in the hardware dequeue + * pointer is wrong - use the cycle state of the TRB pointed to by + * the dequeue pointer. + */ + if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && + !(ep->ep_state & EP_HAS_STREAMS)) + halted_seg = trb_in_td(xhci, td->start_seg, + td->first_trb, td->last_trb, + hw_dequeue & ~0xf, false); + if (halted_seg) { + index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / + sizeof(*halted_trb); + halted_trb = &halted_seg->trbs[index]; + new_cycle = halted_trb->generic.field[3] & 0x1; + xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", + (u8)(hw_dequeue & 0x1), index, new_cycle); + } else { + new_cycle = hw_dequeue & 0x1; + } /* * We want to find the pointer, segment and cycle state of the new trb diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index dca6181c33fd..5a75fe563123 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1899,6 +1899,7 @@ struct xhci_hcd { #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) #define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) unsigned int num_active_eps; unsigned int limit_active_eps; -- cgit v1.2.3 From 880de403777376e50bdf60def359fa50a722006f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 8 Oct 2021 12:25:45 +0300 Subject: USB: xhci: dbc: fix tty registration race Make sure to allocate resources before registering the tty device to avoid having a racing open() and write() fail to enable rx or dereference a NULL pointer when accessing the uninitialised fifo. Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Cc: stable@vger.kernel.org # 4.16 Cc: Lu Baolu Signed-off-by: Johan Hovold Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211008092547.3996295-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgtty.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index 6e784f2fc26d..eb46e642e87a 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -408,40 +408,38 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc) return -EBUSY; xhci_dbc_tty_init_port(dbc, port); - tty_dev = tty_port_register_device(&port->port, - dbc_tty_driver, 0, NULL); - if (IS_ERR(tty_dev)) { - ret = PTR_ERR(tty_dev); - goto register_fail; - } ret = kfifo_alloc(&port->write_fifo, DBC_WRITE_BUF_SIZE, GFP_KERNEL); if (ret) - goto buf_alloc_fail; + goto err_exit_port; ret = xhci_dbc_alloc_requests(dbc, BULK_IN, &port->read_pool, dbc_read_complete); if (ret) - goto request_fail; + goto err_free_fifo; ret = xhci_dbc_alloc_requests(dbc, BULK_OUT, &port->write_pool, dbc_write_complete); if (ret) - goto request_fail; + goto err_free_requests; + + tty_dev = tty_port_register_device(&port->port, + dbc_tty_driver, 0, NULL); + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + goto err_free_requests; + } port->registered = true; return 0; -request_fail: +err_free_requests: xhci_dbc_free_requests(&port->read_pool); xhci_dbc_free_requests(&port->write_pool); +err_free_fifo: kfifo_free(&port->write_fifo); - -buf_alloc_fail: - tty_unregister_device(dbc_tty_driver, 0); - -register_fail: +err_exit_port: xhci_dbc_tty_exit_port(port); dev_err(dbc->dev, "can't register tty port, err %d\n", ret); -- cgit v1.2.3 From ff0e50d3564f33b7f4b35cadeabd951d66cfc570 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Fri, 8 Oct 2021 12:25:46 +0300 Subject: xhci: Fix command ring pointer corruption while aborting a command The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7dbd26a9bc24..311597bba80e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -366,16 +366,22 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, /* Must be called with xhci->lock held, releases and aquires lock back */ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) { - u64 temp_64; + u32 temp_32; int ret; xhci_dbg(xhci, "Abort command ring\n"); reinit_completion(&xhci->cmd_ring_stop_completion); - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, - &xhci->op_regs->cmd_ring); + /* + * The control bits like command stop, abort are located in lower + * dword of the command ring control register. Limit the write + * to the lower dword to avoid corrupting the command ring pointer + * in case if the command ring is stopped by the time upper dword + * is written. + */ + temp_32 = readl(&xhci->op_regs->cmd_ring); + writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); /* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the * completion of the Command Abort operation. If CRR is not negated in 5 -- cgit v1.2.3 From ea0f69d8211963c4b2cc1998b86779a500adb502 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Fri, 8 Oct 2021 12:25:47 +0300 Subject: xhci: Enable trust tx length quirk for Fresco FL11 USB controller Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 633413d78380..2484a9d38ce2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -30,6 +30,7 @@ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -113,6 +114,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 || pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && pdev->revision == 0x0) { -- cgit v1.2.3 From 023a062f238129e8a542b5163c4350ceb076283e Mon Sep 17 00:00:00 2001 From: Cameron Berkenpas Date: Sun, 10 Oct 2021 15:54:11 -0700 Subject: ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 The previous patch's HDA verb initialization for the Lenovo 13s sequence was slightly off. This updated verb sequence has been tested and confirmed working. Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Cc: Signed-off-by: Cameron Berkenpas Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 73e7a92c3728..bca5830ff706 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8367,7 +8367,7 @@ static const struct hda_fixup alc269_fixups[] = { .v.verbs = (const struct hda_verb[]) { { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, - { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, -- cgit v1.2.3 From 011a9ce80763141e7fa613934e76bef8948e4a4f Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Tue, 5 Oct 2021 10:48:12 -0600 Subject: dma-mapping: fix the kerneldoc for dma_map_sgtable() htmldocs began producing the following warnings: kernel/dma/mapping.c:256: WARNING: Definition list ends without a blank line; unexpected unindent. kernel/dma/mapping.c:257: WARNING: Bullet list ends without a blank line; unexpected unindent. Reformatting the list without hyphens fixes the warnings and produces both a readable text and HTML output. Fixes: fffe3cc8c219 ("dma-mapping: allow map_sg() ops to return negative error code") Reported-by: Stephen Rothwell Signed-off-by: Logan Gunthorpe Signed-off-by: Christoph Hellwig --- kernel/dma/mapping.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index 06fec5547e7c..49885023c223 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -249,12 +249,12 @@ EXPORT_SYMBOL(dma_map_sg_attrs); * Returns 0 on success or a negative error code on error. The following * error codes are supported with the given meaning: * - * -EINVAL - An invalid argument, unaligned access or other error - * in usage. Will not succeed if retried. - * -ENOMEM - Insufficient resources (like memory or IOVA space) to - * complete the mapping. Should succeed if retried later. - * -EIO - Legacy error code with an unknown meaning. eg. this is - * returned if a lower level call returned DMA_MAPPING_ERROR. + * -EINVAL An invalid argument, unaligned access or other error + * in usage. Will not succeed if retried. + * -ENOMEM Insufficient resources (like memory or IOVA space) to + * complete the mapping. Should succeed if retried later. + * -EIO Legacy error code with an unknown meaning. eg. this is + * returned if a lower level call returned DMA_MAPPING_ERROR. */ int dma_map_sgtable(struct device *dev, struct sg_table *sgt, enum dma_data_direction dir, unsigned long attrs) -- cgit v1.2.3 From 293d92cbbd2418ca2ba43fed07f1b92e884d1c77 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 6 Oct 2021 22:19:43 +0200 Subject: dma-debug: fix sg checks in debug_dma_map_sg() The following warning occurred sporadically on s390: DMA-API: nvme 0006:00:00.0: device driver maps memory from kernel text or rodata [addr=0000000048cc5e2f] [len=131072] WARNING: CPU: 4 PID: 825 at kernel/dma/debug.c:1083 check_for_illegal_area+0xa8/0x138 It is a false-positive warning, due to broken logic in debug_dma_map_sg(). check_for_illegal_area() checks for overlay of sg elements with kernel text or rodata. It is called with sg_dma_len(s) instead of s->length as parameter. After the call to ->map_sg(), sg_dma_len() will contain the length of possibly combined sg elements in the DMA address space, and not the individual sg element length, which would be s->length. The check will then use the physical start address of an sg element, and add the DMA length for the overlap check, which could result in the false warning, because the DMA length can be larger than the actual single sg element length. In addition, the call to check_for_illegal_area() happens in the iteration over mapped_ents, which will not include all individual sg elements if any of them were combined in ->map_sg(). Fix this by using s->length instead of sg_dma_len(s). Also put the call to check_for_illegal_area() in a separate loop, iterating over all the individual sg elements ("nents" instead of "mapped_ents"). While at it, as suggested by Robin Murphy, also move check_for_stack() inside the new loop, as it is similarly concerned with validating the individual sg elements. Link: https://lore.kernel.org/lkml/20210705185252.4074653-1-gerald.schaefer@linux.ibm.com Fixes: 884d05970bfb ("dma-debug: use sg_dma_len accessor") Signed-off-by: Gerald Schaefer Signed-off-by: Christoph Hellwig --- kernel/dma/debug.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c index 95445bd6eb72..35da4c3a6486 100644 --- a/kernel/dma/debug.c +++ b/kernel/dma/debug.c @@ -1289,6 +1289,12 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, if (unlikely(dma_debug_disabled())) return; + for_each_sg(sg, s, nents, i) { + check_for_stack(dev, sg_page(s), s->offset); + if (!PageHighMem(sg_page(s))) + check_for_illegal_area(dev, sg_virt(s), s->length); + } + for_each_sg(sg, s, mapped_ents, i) { entry = dma_entry_alloc(); if (!entry) @@ -1304,12 +1310,6 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, entry->sg_call_ents = nents; entry->sg_mapped_ents = mapped_ents; - check_for_stack(dev, sg_page(s), s->offset); - - if (!PageHighMem(sg_page(s))) { - check_for_illegal_area(dev, sg_virt(s), sg_dma_len(s)); - } - check_sg_segment(dev, s); add_dma_entry(entry); -- cgit v1.2.3 From c448b7aa3e66042fc0f849d9a0fb90d1af82e948 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Sat, 9 Oct 2021 14:58:40 +0800 Subject: ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() 'component' is allocated in snd_soc_register_component(), but component->list is not initalized, this may cause snd_soc_del_component_unlocked() deref null ptr in the error handing case. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__list_del_entry_valid+0x81/0xf0 Call Trace: snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core] snd_soc_add_component.cold+0x54/0x6c [snd_soc_core] snd_soc_register_component+0x70/0x90 [snd_soc_core] devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core] tas2552_probe+0x265/0x320 [snd_soc_tas2552] ? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552] i2c_device_probe+0xa31/0xbe0 Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize(). Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index c830e96afba2..80ca260595fd 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2599,6 +2599,7 @@ int snd_soc_component_initialize(struct snd_soc_component *component, INIT_LIST_HEAD(&component->dai_list); INIT_LIST_HEAD(&component->dobj_list); INIT_LIST_HEAD(&component->card_list); + INIT_LIST_HEAD(&component->list); mutex_init(&component->io_mutex); component->name = fmt_single_name(dev, &component->id); -- cgit v1.2.3 From 75b3cb97eb1f05042745c0655a7145b0262d4c5c Mon Sep 17 00:00:00 2001 From: Kamal Dasu Date: Fri, 8 Oct 2021 16:36:02 -0400 Subject: spi: bcm-qspi: clear MSPI spifie interrupt during probe Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by: Kamal Dasu Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-bcm-qspi.c | 77 +++++++++++++++++++++++++++------------------- 1 file changed, 45 insertions(+), 32 deletions(-) diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index a78e56f566dd..3043677ba222 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi) static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) { + u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); if (has_bspi(qspi)) bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); + /* clear interrupt */ + bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1); } static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { @@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev, if (!qspi->dev_ids) return -ENOMEM; + /* + * Some SoCs integrate spi controller (e.g., its interrupt bits) + * in specific ways + */ + if (soc_intc) { + qspi->soc_intc = soc_intc; + soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); + } else { + qspi->soc_intc = NULL; + } + + if (qspi->clk) { + ret = clk_prepare_enable(qspi->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + goto qspi_probe_err; + } + qspi->base_clk = clk_get_rate(qspi->clk); + } else { + qspi->base_clk = MSPI_BASE_FREQ; + } + + if (data->has_mspi_rev) { + rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); + /* some older revs do not have a MSPI_REV register */ + if ((rev & 0xff) == 0xff) + rev = 0; + } + + qspi->mspi_maj_rev = (rev >> 4) & 0xf; + qspi->mspi_min_rev = rev & 0xf; + qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; + + qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); + + /* + * On SW resets it is possible to have the mask still enabled + * Need to disable the mask and clear the status while we init + */ + bcm_qspi_hw_uninit(qspi); + for (val = 0; val < num_irqs; val++) { irq = -1; name = qspi_irq_tab[val].irq_name; @@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev, goto qspi_probe_err; } - /* - * Some SoCs integrate spi controller (e.g., its interrupt bits) - * in specific ways - */ - if (soc_intc) { - qspi->soc_intc = soc_intc; - soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); - } else { - qspi->soc_intc = NULL; - } - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "failed to prepare clock\n"); - goto qspi_probe_err; - } - - qspi->base_clk = clk_get_rate(qspi->clk); - - if (data->has_mspi_rev) { - rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); - /* some older revs do not have a MSPI_REV register */ - if ((rev & 0xff) == 0xff) - rev = 0; - } - - qspi->mspi_maj_rev = (rev >> 4) & 0xf; - qspi->mspi_min_rev = rev & 0xf; - qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; - - qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); - bcm_qspi_hw_init(qspi); init_completion(&qspi->mspi_done); init_completion(&qspi->bspi_done); -- cgit v1.2.3 From 9b024201693e397441668cca0d2df7055fe572eb Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 27 Sep 2021 17:22:13 +0300 Subject: platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1. It works for example, for: echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for: echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1. The flow for input buffer conversion is as below: _kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls: rv = _parse_integer(s, base, &_res); For the second case, where n > 1: - _parse_integer() converts 's' to 'val'. For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera. - 'base' is equal or greater then '2' (length of input buffer). As a result, _parse_integer() exits with result zero (rv): rv = 0; while (1) { ... if (val >= base)-> (2 >= 2) break; ... rv++; ... } And _kstrtoull() in their turn will fail: if (rv == 0) return -EINVAL; Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com Signed-off-by: Hans de Goede --- drivers/platform/mellanox/mlxreg-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c index 7646708d57e4..a023ec02126b 100644 --- a/drivers/platform/mellanox/mlxreg-io.c +++ b/drivers/platform/mellanox/mlxreg-io.c @@ -141,7 +141,7 @@ mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr, return -EINVAL; /* Convert buffer to input value. */ - ret = kstrtou32(buf, len, &input_val); + ret = kstrtou32(buf, 0, &input_val); if (ret) return ret; -- cgit v1.2.3 From db9cc7d6f95e7d89b0ce57e785cfd9d67a7505d8 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 27 Sep 2021 17:22:14 +0300 Subject: platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes Fix shift argument for function rol32(). It should be provided in bits, while was provided in bytes. Fixes: 86148190a7db ("platform/mellanox: mlxreg-io: Add support for complex attributes") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com Signed-off-by: Hans de Goede --- drivers/platform/mellanox/mlxreg-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c index a023ec02126b..a916cd89cbbe 100644 --- a/drivers/platform/mellanox/mlxreg-io.c +++ b/drivers/platform/mellanox/mlxreg-io.c @@ -98,7 +98,7 @@ mlxreg_io_get_reg(void *regmap, struct mlxreg_core_data *data, u32 in_val, if (ret) goto access_error; - *regval |= rol32(val, regsize * i); + *regval |= rol32(val, regsize * i * 8); } } -- cgit v1.2.3 From 92813dafcd8cae40b6256fd9392a44ecd5c9f505 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 11 Oct 2021 15:23:38 +0200 Subject: platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMI DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver, so it must depend on the Kconfig option which enables the main dell-wmi driver. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Reported-by: Randy Dunlap Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com --- drivers/platform/x86/dell/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index 42513eab1d06..2fffa57e596e 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -167,6 +167,7 @@ config DELL_WMI config DELL_WMI_PRIVACY bool "Dell WMI Hardware Privacy Support" depends on LEDS_TRIGGER_AUDIO = y || DELL_WMI = LEDS_TRIGGER_AUDIO + depends on DELL_WMI help This option adds integration with the "Dell Hardware Privacy" feature of Dell laptops to the dell-wmi driver. -- cgit v1.2.3 From 41512e4dc0b84525495e784295092592adb87f1b Mon Sep 17 00:00:00 2001 From: Prashant Malani Date: Tue, 28 Sep 2021 03:19:30 -0700 Subject: platform/x86: intel_scu_ipc: Fix busy loop expiry time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The macro IPC_TIMEOUT is already in jiffies (it is also used like that elsewhere in the file when calling wait_for_completion_timeout()). Don’t convert it using helper functions for the purposes of calculating the busy loop expiry time. Fixes: e7b7ab3847c9 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”) Signed-off-by: Prashant Malani Cc: Benson Leung Reviewed-by: Mika Westerberg Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_scu_ipc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index bfa0cc20750d..cfb249da2a7b 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -232,7 +232,7 @@ static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset) /* Wait till scu status is busy */ static inline int busy_loop(struct intel_scu_ipc_dev *scu) { - unsigned long end = jiffies + msecs_to_jiffies(IPC_TIMEOUT); + unsigned long end = jiffies + IPC_TIMEOUT; do { u32 status; -- cgit v1.2.3 From 5c02b581ce84eea240d25c8318a1f65133a04415 Mon Sep 17 00:00:00 2001 From: Prashant Malani Date: Tue, 28 Sep 2021 03:19:32 -0700 Subject: platform/x86: intel_scu_ipc: Increase virtual timeout to 10s Commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") states that the recommended timeout range is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10 seconds, to account for situations where the 5 seconds is insufficient for disconnect command success. Signed-off-by: Prashant Malani Cc: Benson Leung Reviewed-by: Mika Westerberg Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.org Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_scu_ipc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index cfb249da2a7b..d71a1dce781c 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -75,7 +75,7 @@ struct intel_scu_ipc_dev { #define IPC_READ_BUFFER 0x90 /* Timeout in jiffies */ -#define IPC_TIMEOUT (5 * HZ) +#define IPC_TIMEOUT (10 * HZ) static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */ static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */ -- cgit v1.2.3 From a0c5814b9933f25ecb6de169483c5b88cf632bca Mon Sep 17 00:00:00 2001 From: Prashant Malani Date: Tue, 28 Sep 2021 03:19:34 -0700 Subject: platform/x86: intel_scu_ipc: Update timeout value in comment The comment decribing the IPC timeout hadn't been updated when the actual timeout was changed from 3 to 5 seconds in commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") . Since the value is anyway updated to 10s now, take this opportunity to update the value in the comment too. Signed-off-by: Prashant Malani Cc: Benson Leung Reviewed-by: Mika Westerberg Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_scu_ipc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index d71a1dce781c..7cc9089d1e14 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -247,7 +247,7 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu) return -ETIMEDOUT; } -/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */ +/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu) { int status; -- cgit v1.2.3 From c0d84d2c7c23e9cf23a5abdda40eeaa79eabfe69 Mon Sep 17 00:00:00 2001 From: Sachi King Date: Sat, 2 Oct 2021 14:18:39 +1000 Subject: platform/x86: amd-pmc: Add alternative acpi id for PMC controller The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. Include AMD0005 in the acpi id list. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Cc: # 5.14+ Signed-off-by: Sachi King Reviewed-by: Mario Limonciello Link: https://lore.kernel.org/r/20211002041840.2058647-1-nakato@nakato.io Signed-off-by: Hans de Goede --- drivers/platform/x86/amd-pmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index d6a7c896ac86..fc95620101e8 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -476,6 +476,7 @@ static const struct acpi_device_id amd_pmc_acpi_ids[] = { {"AMDI0006", 0}, {"AMDI0007", 0}, {"AMD0004", 0}, + {"AMD0005", 0}, { } }; MODULE_DEVICE_TABLE(acpi, amd_pmc_acpi_ids); -- cgit v1.2.3 From 0f607d6b227470456a69a37d7c7badea51d52844 Mon Sep 17 00:00:00 2001 From: "Zephaniah E. Loss-Cutler-Hull" Date: Mon, 4 Oct 2021 21:48:55 -0700 Subject: platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2 This works just fine on my system. Signed-off-by: Zephaniah E. Loss-Cutler-Hull Cc: Link: https://lore.kernel.org/r/20211005044855.1429724-1-zephaniah@gmail.com Signed-off-by: Hans de Goede --- drivers/platform/x86/gigabyte-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c index d53634c8a6e0..658bab4b7964 100644 --- a/drivers/platform/x86/gigabyte-wmi.c +++ b/drivers/platform/x86/gigabyte-wmi.c @@ -141,6 +141,7 @@ static u8 gigabyte_wmi_detect_sensor_usability(struct wmi_device *wdev) static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B450M S2H V2"), + DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE AX V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 GAMING X V2"), -- cgit v1.2.3 From c005828744f584bfcd2cf3ed64dfef15a5078960 Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Fri, 8 Oct 2021 23:46:08 +0100 Subject: platform/x86: intel_skl_int3472: Correct null check The int3472-discrete driver can enter an error path after initialising int3472->clock.ena_gpio, but before it has registered the clock. This will cause a NULL pointer dereference, because clkdev_drop() is not null aware. Instead of guarding the call to skl_int3472_unregister_clock() by checking for .ena_gpio, check specifically for the presence of the clk_lookup, which will guarantee clkdev_create() has already been called. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453 Fixes: 7540599a5ef1 ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()") Signed-off-by: Daniel Scally Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.com Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/int3472/intel_skl_int3472_discrete.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/int3472/intel_skl_int3472_discrete.c b/drivers/platform/x86/intel/int3472/intel_skl_int3472_discrete.c index 9fe0a2527e1c..e59d79c7e82f 100644 --- a/drivers/platform/x86/intel/int3472/intel_skl_int3472_discrete.c +++ b/drivers/platform/x86/intel/int3472/intel_skl_int3472_discrete.c @@ -401,7 +401,7 @@ int skl_int3472_discrete_remove(struct platform_device *pdev) gpiod_remove_lookup_table(&int3472->gpios); - if (int3472->clock.ena_gpio) + if (int3472->clock.cl) skl_int3472_unregister_clock(int3472); gpiod_put(int3472->clock.ena_gpio); -- cgit v1.2.3 From 7df227847ab562c42d318bceccebb0c911c87b04 Mon Sep 17 00:00:00 2001 From: Shravan S Date: Wed, 6 Oct 2021 13:05:25 +0530 Subject: platform/x86: int1092: Fix non sequential device mode handling SAR information from BIOS may come in non sequential pattern. To overcome the issue, a check is made to extract the right SAR information using the device mode which is currently being used. Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Shravan S Link: https://lore.kernel.org/r/20211006073525.1332925-1-s.shravan@intel.com Signed-off-by: Hans de Goede Reviewed-by: Hans de Goede --- MAINTAINERS | 2 +- drivers/platform/x86/intel/int1092/intel_sar.c | 23 +++++++++++++++-------- 2 files changed, 16 insertions(+), 9 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..6cfad2bf9d81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9302,7 +9302,7 @@ S: Maintained F: drivers/platform/x86/intel/atomisp2/led.c INTEL BIOS SAR INT1092 DRIVER -M: Shravan S +M: Shravan Sudhakar M: Intel Corporation L: platform-driver-x86@vger.kernel.org S: Maintained diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c index 379560fe5df9..e03943e6380a 100644 --- a/drivers/platform/x86/intel/int1092/intel_sar.c +++ b/drivers/platform/x86/intel/int1092/intel_sar.c @@ -42,12 +42,20 @@ static void update_sar_data(struct wwan_sar_context *context) if (config->device_mode_info && context->sar_data.device_mode < config->total_dev_mode) { - struct wwan_device_mode_info *dev_mode = - &config->device_mode_info[context->sar_data.device_mode]; - - context->sar_data.antennatable_index = dev_mode->antennatable_index; - context->sar_data.bandtable_index = dev_mode->bandtable_index; - context->sar_data.sartable_index = dev_mode->sartable_index; + int itr = 0; + + for (itr = 0; itr < config->total_dev_mode; itr++) { + if (context->sar_data.device_mode == + config->device_mode_info[itr].device_mode) { + struct wwan_device_mode_info *dev_mode = + &config->device_mode_info[itr]; + + context->sar_data.antennatable_index = dev_mode->antennatable_index; + context->sar_data.bandtable_index = dev_mode->bandtable_index; + context->sar_data.sartable_index = dev_mode->sartable_index; + break; + } + } } } @@ -305,7 +313,6 @@ static struct platform_driver sar_driver = { .remove = sar_remove, .driver = { .name = DRVNAME, - .owner = THIS_MODULE, .acpi_match_table = ACPI_PTR(sar_device_ids) } }; @@ -313,4 +320,4 @@ module_platform_driver(sar_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Platform device driver for INTEL MODEM BIOS SAR"); -MODULE_AUTHOR("Shravan S "); +MODULE_AUTHOR("Shravan Sudhakar "); -- cgit v1.2.3 From ce46ae0c3e31400dc89d1e4620a812647cab9c72 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Fri, 1 Oct 2021 18:48:49 +0300 Subject: fs/ntfs3: Keep prealloc for all types of files Before we haven't kept prealloc for sparse files because we thought that it will speed up create / write operations. It lead to situation, when user reserved some space for sparse file, filled volume, and wasn't able to write in reserved file. With this commit we keep prealloc. Now xfstest generic/274 pass. Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations") Signed-off-by: Konstantin Komarov --- fs/ntfs3/attrib.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 8a00fa978f5f..e8c00dda42ad 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -447,11 +447,8 @@ again: again_1: align = sbi->cluster_size; - if (is_ext) { + if (is_ext) align <<= attr_b->nres.c_unit; - if (is_attr_sparsed(attr_b)) - keep_prealloc = false; - } old_valid = le64_to_cpu(attr_b->nres.valid_size); old_size = le64_to_cpu(attr_b->nres.data_size); @@ -461,9 +458,6 @@ again_1: new_alloc = (new_size + align - 1) & ~(u64)(align - 1); new_alen = new_alloc >> cluster_bits; - if (keep_prealloc && is_ext) - keep_prealloc = false; - if (keep_prealloc && new_size < old_size) { attr_b->nres.data_size = cpu_to_le64(new_size); mi_b->dirty = true; -- cgit v1.2.3 From 228af5a4fa3a8293bd8b7ac5cf59548ee29627bf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 10 Oct 2021 09:55:46 +0200 Subject: ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney Reviewed-by: Arnd Bergmann Cc: Cc: Rich Felker Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/pcm_compat.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 71 insertions(+), 1 deletion(-) diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index a59de24695ec..dfe5a64e19d2 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -468,6 +468,76 @@ static int snd_pcm_ioctl_sync_ptr_x32(struct snd_pcm_substream *substream, } #endif /* CONFIG_X86_X32 */ +#ifdef __BIG_ENDIAN +typedef char __pad_before_u32[4]; +typedef char __pad_after_u32[0]; +#else +typedef char __pad_before_u32[0]; +typedef char __pad_after_u32[4]; +#endif + +/* PCM 2.0.15 API definition had a bug in mmap control; it puts the avail_min + * at the wrong offset due to a typo in padding type. + * The bug hits only 32bit. + * A workaround for incorrect read/write is needed only in 32bit compat mode. + */ +struct __snd_pcm_mmap_control64_buggy { + __pad_before_u32 __pad1; + __u32 appl_ptr; + __pad_before_u32 __pad2; /* SiC! here is the bug */ + __pad_before_u32 __pad3; + __u32 avail_min; + __pad_after_uframe __pad4; +}; + +static int snd_pcm_ioctl_sync_ptr_buggy(struct snd_pcm_substream *substream, + struct snd_pcm_sync_ptr __user *_sync_ptr) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_pcm_sync_ptr sync_ptr; + struct __snd_pcm_mmap_control64_buggy *sync_cp; + volatile struct snd_pcm_mmap_status *status; + volatile struct snd_pcm_mmap_control *control; + int err; + + memset(&sync_ptr, 0, sizeof(sync_ptr)); + sync_cp = (struct __snd_pcm_mmap_control64_buggy *)&sync_ptr.c.control; + if (get_user(sync_ptr.flags, (unsigned __user *)&(_sync_ptr->flags))) + return -EFAULT; + if (copy_from_user(sync_cp, &(_sync_ptr->c.control), sizeof(*sync_cp))) + return -EFAULT; + status = runtime->status; + control = runtime->control; + if (sync_ptr.flags & SNDRV_PCM_SYNC_PTR_HWSYNC) { + err = snd_pcm_hwsync(substream); + if (err < 0) + return err; + } + snd_pcm_stream_lock_irq(substream); + if (!(sync_ptr.flags & SNDRV_PCM_SYNC_PTR_APPL)) { + err = pcm_lib_apply_appl_ptr(substream, sync_cp->appl_ptr); + if (err < 0) { + snd_pcm_stream_unlock_irq(substream); + return err; + } + } else { + sync_cp->appl_ptr = control->appl_ptr; + } + if (!(sync_ptr.flags & SNDRV_PCM_SYNC_PTR_AVAIL_MIN)) + control->avail_min = sync_cp->avail_min; + else + sync_cp->avail_min = control->avail_min; + sync_ptr.s.status.state = status->state; + sync_ptr.s.status.hw_ptr = status->hw_ptr; + sync_ptr.s.status.tstamp = status->tstamp; + sync_ptr.s.status.suspended_state = status->suspended_state; + sync_ptr.s.status.audio_tstamp = status->audio_tstamp; + snd_pcm_stream_unlock_irq(substream); + if (copy_to_user(_sync_ptr, &sync_ptr, sizeof(sync_ptr))) + return -EFAULT; + return 0; +} + /* */ enum { @@ -537,7 +607,7 @@ static long snd_pcm_ioctl_compat(struct file *file, unsigned int cmd, unsigned l if (in_x32_syscall()) return snd_pcm_ioctl_sync_ptr_x32(substream, argp); #endif /* CONFIG_X86_X32 */ - return snd_pcm_common_ioctl(file, substream, cmd, argp); + return snd_pcm_ioctl_sync_ptr_buggy(substream, argp); case SNDRV_PCM_IOCTL_HW_REFINE32: return snd_pcm_ioctl_hw_params_compat(substream, 1, argp); case SNDRV_PCM_IOCTL_HW_PARAMS32: -- cgit v1.2.3 From 9b75450d6c580100611743fa7e690ea3cb47cd4a Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 28 Sep 2021 19:00:30 +0300 Subject: fs/ntfs3: Fix memory leak if fill_super failed In ntfs_init_fs_context we allocate memory in fc->s_fs_info. In case of failed mount we must free it in ntfs_fill_super. We can't do it in ntfs_fs_free, because ntfs_fs_free called with fc->s_fs_info == NULL. fc->s_fs_info became NULL in sget_fc. Signed-off-by: Konstantin Komarov --- fs/ntfs3/super.c | 90 +++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 56 insertions(+), 34 deletions(-) diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 705d8b4f4894..d41d76979e12 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -908,7 +908,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (IS_ERR(sbi->options->nls)) { sbi->options->nls = NULL; errorf(fc, "Cannot load nls %s", sbi->options->nls_name); - return -EINVAL; + err = -EINVAL; + goto out; } rq = bdev_get_queue(bdev); @@ -922,7 +923,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) err = ntfs_init_from_boot(sb, rq ? queue_logical_block_size(rq) : 512, bdev->bd_inode->i_size); if (err) - return err; + goto out; /* * Load $Volume. This should be done before $LogFile @@ -933,7 +934,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_VOLUME); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $Volume."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } ni = ntfs_i(inode); @@ -954,19 +956,19 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) } else { /* Should we break mounting here? */ //err = -EINVAL; - //goto out; + //goto put_inode_out; } attr = ni_find_attr(ni, attr, NULL, ATTR_VOL_INFO, NULL, 0, NULL, NULL); if (!attr || is_attr_ext(attr)) { err = -EINVAL; - goto out; + goto put_inode_out; } info = resident_data_ex(attr, SIZEOF_ATTRIBUTE_VOLUME_INFO); if (!info) { err = -EINVAL; - goto out; + goto put_inode_out; } sbi->volume.major_ver = info->major_ver; @@ -980,7 +982,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_MIRROR); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $MFTMirr."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } sbi->mft.recs_mirr = @@ -994,14 +997,15 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_LOGFILE); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load \x24LogFile."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } ni = ntfs_i(inode); err = ntfs_loadlog_and_replay(ni, sbi); if (err) - goto out; + goto put_inode_out; iput(inode); @@ -1009,14 +1013,16 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (!sb_rdonly(sb)) { ntfs_warn(sb, "failed to replay log file. Can't mount rw!"); - return -EINVAL; + err = -EINVAL; + goto out; } } else if (sbi->volume.flags & VOLUME_FLAG_DIRTY) { if (!sb_rdonly(sb) && !sbi->options->force) { ntfs_warn( sb, "volume is dirty and \"force\" flag is not set!"); - return -EINVAL; + err = -EINVAL; + goto out; } } @@ -1027,7 +1033,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_MFT); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $MFT."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } ni = ntfs_i(inode); @@ -1038,11 +1045,11 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) err = wnd_init(&sbi->mft.bitmap, sb, tt); if (err) - goto out; + goto put_inode_out; err = ni_load_all_mi(ni); if (err) - goto out; + goto put_inode_out; sbi->mft.ni = ni; @@ -1052,7 +1059,8 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_BADCLUS); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $BadClus."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } ni = ntfs_i(inode); @@ -1075,13 +1083,14 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_BITMAP); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $Bitmap."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } #ifndef CONFIG_NTFS3_64BIT_CLUSTER if (inode->i_size >> 32) { err = -EINVAL; - goto out; + goto put_inode_out; } #endif @@ -1089,21 +1098,21 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) tt = sbi->used.bitmap.nbits; if (inode->i_size < bitmap_size(tt)) { err = -EINVAL; - goto out; + goto put_inode_out; } /* Not necessary. */ sbi->used.bitmap.set_tail = true; err = wnd_init(&sbi->used.bitmap, sb, tt); if (err) - goto out; + goto put_inode_out; iput(inode); /* Compute the MFT zone. */ err = ntfs_refresh_zone(sbi); if (err) - return err; + goto out; /* Load $AttrDef. */ ref.low = cpu_to_le32(MFT_REC_ATTR); @@ -1111,18 +1120,19 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_ATTRDEF); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $AttrDef -> %d", err); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } if (inode->i_size < sizeof(struct ATTR_DEF_ENTRY)) { err = -EINVAL; - goto out; + goto put_inode_out; } bytes = inode->i_size; sbi->def_table = t = kmalloc(bytes, GFP_NOFS); if (!t) { err = -ENOMEM; - goto out; + goto put_inode_out; } for (done = idx = 0; done < bytes; done += PAGE_SIZE, idx++) { @@ -1131,7 +1141,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (IS_ERR(page)) { err = PTR_ERR(page); - goto out; + goto put_inode_out; } memcpy(Add2Ptr(t, done), page_address(page), min(PAGE_SIZE, tail)); @@ -1139,7 +1149,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (!idx && ATTR_STD != t->type) { err = -EINVAL; - goto out; + goto put_inode_out; } } @@ -1173,12 +1183,13 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) inode = ntfs_iget5(sb, &ref, &NAME_UPCASE); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load $UpCase."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } if (inode->i_size != 0x10000 * sizeof(short)) { err = -EINVAL; - goto out; + goto put_inode_out; } for (idx = 0; idx < (0x10000 * sizeof(short) >> PAGE_SHIFT); idx++) { @@ -1188,7 +1199,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) if (IS_ERR(page)) { err = PTR_ERR(page); - goto out; + goto put_inode_out; } src = page_address(page); @@ -1214,7 +1225,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) /* Load $Secure. */ err = ntfs_security_init(sbi); if (err) - return err; + goto out; /* Load $Extend. */ err = ntfs_extend_init(sbi); @@ -1239,19 +1250,30 @@ load_root: inode = ntfs_iget5(sb, &ref, &NAME_ROOT); if (IS_ERR(inode)) { ntfs_err(sb, "Failed to load root."); - return PTR_ERR(inode); + err = PTR_ERR(inode); + goto out; } sb->s_root = d_make_root(inode); - if (!sb->s_root) - return -ENOMEM; + if (!sb->s_root) { + err = -ENOMEM; + goto put_inode_out; + } fc->fs_private = NULL; - fc->s_fs_info = NULL; return 0; -out: + +put_inode_out: iput(inode); +out: + /* + * Free resources here. + * ntfs_fs_free will be called with fc->s_fs_info = NULL + */ + put_ntfs(sbi); + sb->s_fs_info = NULL; + return err; } -- cgit v1.2.3 From e02083f0bcc250c0556ec9e6f7ddb74220c72572 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Mon, 11 Oct 2021 17:13:38 +0100 Subject: drm/i915: remember to call i915_sw_fence_fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Seems to fix some object-debug splat which appeared while debugging something unrelated. v2: s/guc_blocked/guc_state.blocked/ Signed-off-by: Matthew Auld Cc: Ville Syrjälä Cc: Matthew Brost Tested-by: Ville Syrjälä Reviewed-by: Matthew Brost Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation") Link: https://patchwork.freedesktop.org/patch/msgid/20210924144646.4096402-1-matthew.auld@intel.com (cherry picked from commit d576b31bdece7b5034047cbe21170e948198d32f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_context.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/gt/intel_context.c b/drivers/gpu/drm/i915/gt/intel_context.c index e866105dd174..17ca4dc4d0cb 100644 --- a/drivers/gpu/drm/i915/gt/intel_context.c +++ b/drivers/gpu/drm/i915/gt/intel_context.c @@ -421,6 +421,7 @@ void intel_context_fini(struct intel_context *ce) mutex_destroy(&ce->pin_mutex); i915_active_fini(&ce->active); + i915_sw_fence_fini(&ce->guc_blocked); } void i915_context_module_exit(void) -- cgit v1.2.3 From 2c69078851b3d7495eb191158d0bcb9c91a6d148 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Mon, 4 Oct 2021 18:22:45 +0300 Subject: fs/ntfs3: Rework ntfs_utf16_to_nls Now ntfs_utf16_to_nls takes length as one of arguments. If length of symlink > 255, then we tried to convert length of symlink +- some random number. Now 255 symbols limit was removed. Signed-off-by: Konstantin Komarov --- fs/ntfs3/dir.c | 19 ++++++++----------- fs/ntfs3/ntfs_fs.h | 2 +- 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 785e72d4392e..fb438d604040 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -15,11 +15,10 @@ #include "ntfs_fs.h" /* Convert little endian UTF-16 to NLS string. */ -int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const struct le_str *uni, +int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const __le16 *name, u32 len, u8 *buf, int buf_len) { - int ret, uni_len, warn; - const __le16 *ip; + int ret, warn; u8 *op; struct nls_table *nls = sbi->options->nls; @@ -27,18 +26,16 @@ int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const struct le_str *uni, if (!nls) { /* UTF-16 -> UTF-8 */ - ret = utf16s_to_utf8s((wchar_t *)uni->name, uni->len, - UTF16_LITTLE_ENDIAN, buf, buf_len); + ret = utf16s_to_utf8s(name, len, UTF16_LITTLE_ENDIAN, buf, + buf_len); buf[ret] = '\0'; return ret; } - ip = uni->name; op = buf; - uni_len = uni->len; warn = 0; - while (uni_len--) { + while (len--) { u16 ec; int charlen; char dump[5]; @@ -49,7 +46,7 @@ int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const struct le_str *uni, break; } - ec = le16_to_cpu(*ip++); + ec = le16_to_cpu(*name++); charlen = nls->uni2char(ec, op, buf_len); if (charlen > 0) { @@ -304,8 +301,8 @@ static inline int ntfs_filldir(struct ntfs_sb_info *sbi, struct ntfs_inode *ni, if (sbi->options->nohidden && (fname->dup.fa & FILE_ATTRIBUTE_HIDDEN)) return 0; - name_len = ntfs_utf16_to_nls(sbi, (struct le_str *)&fname->name_len, - name, PATH_MAX); + name_len = ntfs_utf16_to_nls(sbi, fname->name, fname->name_len, name, + PATH_MAX); if (name_len <= 0) { ntfs_warn(sbi->sb, "failed to convert name for inode %lx.", ino); diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 38b7c1a9dc52..9277b552f257 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -475,7 +475,7 @@ bool are_bits_set(const ulong *map, size_t bit, size_t nbits); size_t get_set_bits_ex(const ulong *map, size_t bit, size_t nbits); /* Globals from dir.c */ -int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const struct le_str *uni, +int ntfs_utf16_to_nls(struct ntfs_sb_info *sbi, const __le16 *name, u32 len, u8 *buf, int buf_len); int ntfs_nls_to_utf16(struct ntfs_sb_info *sbi, const u8 *name, u32 name_len, struct cpu_str *uni, u32 max_ulen, -- cgit v1.2.3 From 4dbe8e4413d70ac4f163592d69eef74d7824783a Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Mon, 4 Oct 2021 18:59:55 +0300 Subject: fs/ntfs3: Refactor ntfs_readlink_hlp Rename some variables. Returned err by default is EINVAL. Signed-off-by: Konstantin Komarov --- fs/ntfs3/inode.c | 91 ++++++++++++++++++++++++++------------------------------ 1 file changed, 43 insertions(+), 48 deletions(-) diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index 7dd162f6a7e2..d618b0573533 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -1763,15 +1763,15 @@ void ntfs_evict_inode(struct inode *inode) static noinline int ntfs_readlink_hlp(struct inode *inode, char *buffer, int buflen) { - int i, err = 0; + int i, err = -EINVAL; struct ntfs_inode *ni = ntfs_i(inode); struct super_block *sb = inode->i_sb; struct ntfs_sb_info *sbi = sb->s_fs_info; - u64 i_size = inode->i_size; - u16 nlen = 0; + u64 size; + u16 ulen = 0; void *to_free = NULL; struct REPARSE_DATA_BUFFER *rp; - struct le_str *uni; + const __le16 *uname; struct ATTRIB *attr; /* Reparse data present. Try to parse it. */ @@ -1780,68 +1780,64 @@ static noinline int ntfs_readlink_hlp(struct inode *inode, char *buffer, *buffer = 0; - /* Read into temporal buffer. */ - if (i_size > sbi->reparse.max_size || i_size <= sizeof(u32)) { - err = -EINVAL; - goto out; - } - attr = ni_find_attr(ni, NULL, NULL, ATTR_REPARSE, NULL, 0, NULL, NULL); - if (!attr) { - err = -EINVAL; + if (!attr) goto out; - } if (!attr->non_res) { - rp = resident_data_ex(attr, i_size); - if (!rp) { - err = -EINVAL; + rp = resident_data_ex(attr, sizeof(struct REPARSE_DATA_BUFFER)); + if (!rp) goto out; - } + size = le32_to_cpu(attr->res.data_size); } else { - rp = kmalloc(i_size, GFP_NOFS); + size = le64_to_cpu(attr->nres.data_size); + rp = NULL; + } + + if (size > sbi->reparse.max_size || size <= sizeof(u32)) + goto out; + + if (!rp) { + rp = kmalloc(size, GFP_NOFS); if (!rp) { err = -ENOMEM; goto out; } to_free = rp; - err = ntfs_read_run_nb(sbi, &ni->file.run, 0, rp, i_size, NULL); + /* Read into temporal buffer. */ + err = ntfs_read_run_nb(sbi, &ni->file.run, 0, rp, size, NULL); if (err) goto out; } - err = -EINVAL; - /* Microsoft Tag. */ switch (rp->ReparseTag) { case IO_REPARSE_TAG_MOUNT_POINT: /* Mount points and junctions. */ /* Can we use 'Rp->MountPointReparseBuffer.PrintNameLength'? */ - if (i_size <= offsetof(struct REPARSE_DATA_BUFFER, - MountPointReparseBuffer.PathBuffer)) + if (size <= offsetof(struct REPARSE_DATA_BUFFER, + MountPointReparseBuffer.PathBuffer)) goto out; - uni = Add2Ptr(rp, - offsetof(struct REPARSE_DATA_BUFFER, - MountPointReparseBuffer.PathBuffer) + - le16_to_cpu(rp->MountPointReparseBuffer - .PrintNameOffset) - - 2); - nlen = le16_to_cpu(rp->MountPointReparseBuffer.PrintNameLength); + uname = Add2Ptr(rp, + offsetof(struct REPARSE_DATA_BUFFER, + MountPointReparseBuffer.PathBuffer) + + le16_to_cpu(rp->MountPointReparseBuffer + .PrintNameOffset)); + ulen = le16_to_cpu(rp->MountPointReparseBuffer.PrintNameLength); break; case IO_REPARSE_TAG_SYMLINK: /* FolderSymbolicLink */ /* Can we use 'Rp->SymbolicLinkReparseBuffer.PrintNameLength'? */ - if (i_size <= offsetof(struct REPARSE_DATA_BUFFER, - SymbolicLinkReparseBuffer.PathBuffer)) + if (size <= offsetof(struct REPARSE_DATA_BUFFER, + SymbolicLinkReparseBuffer.PathBuffer)) goto out; - uni = Add2Ptr(rp, - offsetof(struct REPARSE_DATA_BUFFER, - SymbolicLinkReparseBuffer.PathBuffer) + - le16_to_cpu(rp->SymbolicLinkReparseBuffer - .PrintNameOffset) - - 2); - nlen = le16_to_cpu( + uname = Add2Ptr( + rp, offsetof(struct REPARSE_DATA_BUFFER, + SymbolicLinkReparseBuffer.PathBuffer) + + le16_to_cpu(rp->SymbolicLinkReparseBuffer + .PrintNameOffset)); + ulen = le16_to_cpu( rp->SymbolicLinkReparseBuffer.PrintNameLength); break; @@ -1873,29 +1869,28 @@ static noinline int ntfs_readlink_hlp(struct inode *inode, char *buffer, goto out; } if (!IsReparseTagNameSurrogate(rp->ReparseTag) || - i_size <= sizeof(struct REPARSE_POINT)) { + size <= sizeof(struct REPARSE_POINT)) { goto out; } /* Users tag. */ - uni = Add2Ptr(rp, sizeof(struct REPARSE_POINT) - 2); - nlen = le16_to_cpu(rp->ReparseDataLength) - + uname = Add2Ptr(rp, sizeof(struct REPARSE_POINT)); + ulen = le16_to_cpu(rp->ReparseDataLength) - sizeof(struct REPARSE_POINT); } /* Convert nlen from bytes to UNICODE chars. */ - nlen >>= 1; + ulen >>= 1; /* Check that name is available. */ - if (!nlen || &uni->name[nlen] > (__le16 *)Add2Ptr(rp, i_size)) + if (!ulen || uname + ulen > (__le16 *)Add2Ptr(rp, size)) goto out; /* If name is already zero terminated then truncate it now. */ - if (!uni->name[nlen - 1]) - nlen -= 1; - uni->len = nlen; + if (!uname[ulen - 1]) + ulen -= 1; - err = ntfs_utf16_to_nls(sbi, uni, buffer, buflen); + err = ntfs_utf16_to_nls(sbi, uname, ulen, buffer, buflen); if (err < 0) goto out; -- cgit v1.2.3 From 14a981193e409d8ca3f89768cfbd7a9a516d9927 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Mon, 4 Oct 2021 18:52:24 +0300 Subject: fs/ntfs3: Refactor ntfs_create_inode Set size for symlink, so we don't need to calculate it on the fly. Signed-off-by: Konstantin Komarov --- fs/ntfs3/inode.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index d618b0573533..bdebbbd53e76 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -1488,7 +1488,10 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, asize = ALIGN(SIZEOF_RESIDENT + nsize, 8); t16 = PtrOffset(rec, attr); - /* 0x78 - the size of EA + EAINFO to store WSL */ + /* + * Below function 'ntfs_save_wsl_perm' requires 0x78 bytes. + * It is good idea to keep extened attributes resident. + */ if (asize + t16 + 0x78 + 8 > sbi->record_size) { CLST alen; CLST clst = bytes_to_cluster(sbi, nsize); @@ -1523,14 +1526,14 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, } asize = SIZEOF_NONRESIDENT + ALIGN(err, 8); - inode->i_size = nsize; } else { attr->res.data_off = SIZEOF_RESIDENT_LE; attr->res.data_size = cpu_to_le32(nsize); memcpy(Add2Ptr(attr, SIZEOF_RESIDENT), rp, nsize); - inode->i_size = nsize; nsize = 0; } + /* Size of symlink equals the length of input string. */ + inode->i_size = size; attr->size = cpu_to_le32(asize); @@ -1567,6 +1570,8 @@ struct inode *ntfs_create_inode(struct user_namespace *mnt_userns, inode->i_op = &ntfs_link_inode_operations; inode->i_fop = NULL; inode->i_mapping->a_ops = &ntfs_aops; + inode->i_size = size; + inode_nohighmem(inode); } else if (S_ISREG(mode)) { inode->i_op = &ntfs_file_inode_operations; inode->i_fop = &ntfs_file_operations; -- cgit v1.2.3 From cd4c76ff807c1afeed89f1b7e311760c0e296349 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 5 Oct 2021 19:08:08 +0300 Subject: fs/ntfs3: Refactor ni_parse_reparse Change argument from void* to struct REPARSE_DATA_BUFFER* We copy data to buffer, so we can read it later in ntfs_read_mft. Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 9 +++++---- fs/ntfs3/ntfs_fs.h | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 007602badd90..ecb965e4afd0 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -1710,18 +1710,16 @@ out: /* * ni_parse_reparse * - * Buffer is at least 24 bytes. + * buffer - memory for reparse buffer header */ enum REPARSE_SIGN ni_parse_reparse(struct ntfs_inode *ni, struct ATTRIB *attr, - void *buffer) + struct REPARSE_DATA_BUFFER *buffer) { const struct REPARSE_DATA_BUFFER *rp = NULL; u8 bits; u16 len; typeof(rp->CompressReparseBuffer) *cmpr; - static_assert(sizeof(struct REPARSE_DATA_BUFFER) <= 24); - /* Try to estimate reparse point. */ if (!attr->non_res) { rp = resident_data_ex(attr, sizeof(struct REPARSE_DATA_BUFFER)); @@ -1807,6 +1805,9 @@ enum REPARSE_SIGN ni_parse_reparse(struct ntfs_inode *ni, struct ATTRIB *attr, return REPARSE_NONE; } + if (buffer != rp) + memcpy(buffer, rp, sizeof(struct REPARSE_DATA_BUFFER)); + /* Looks like normal symlink. */ return REPARSE_LINK; } diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 9277b552f257..e95d93c683ed 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -547,7 +547,7 @@ struct ATTR_FILE_NAME *ni_fname_type(struct ntfs_inode *ni, u8 name_type, struct ATTR_LIST_ENTRY **entry); int ni_new_attr_flags(struct ntfs_inode *ni, enum FILE_ATTRIBUTE new_fa); enum REPARSE_SIGN ni_parse_reparse(struct ntfs_inode *ni, struct ATTRIB *attr, - void *buffer); + struct REPARSE_DATA_BUFFER *buffer); int ni_write_inode(struct inode *inode, int sync, const char *hint); #define _ni_write_inode(i, w) ni_write_inode(i, w, __func__) int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, -- cgit v1.2.3 From 22b05f1ac0332cb47701649206997d8d9a1a7f24 Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Tue, 5 Oct 2021 19:33:26 +0300 Subject: fs/ntfs3: Refactor ntfs_read_mft Don't save size of attribute reparse point as size of symlink. Signed-off-by: Konstantin Komarov --- fs/ntfs3/inode.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index bdebbbd53e76..859951d785cb 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -222,9 +222,6 @@ next_attr: if (!attr->non_res) { ni->i_valid = inode->i_size = rsize; inode_set_bytes(inode, rsize); - t32 = asize; - } else { - t32 = le16_to_cpu(attr->nres.run_off); } mode = S_IFREG | (0777 & sbi->options->fs_fmask_inv); @@ -313,17 +310,14 @@ next_attr: rp_fa = ni_parse_reparse(ni, attr, &rp); switch (rp_fa) { case REPARSE_LINK: - if (!attr->non_res) { - inode->i_size = rsize; - inode_set_bytes(inode, rsize); - t32 = asize; - } else { - inode->i_size = - le64_to_cpu(attr->nres.data_size); - t32 = le16_to_cpu(attr->nres.run_off); - } + /* + * Normal symlink. + * Assume one unicode symbol == one utf8. + */ + inode->i_size = le16_to_cpu(rp.SymbolicLinkReparseBuffer + .PrintNameLength) / + sizeof(u16); - /* Looks like normal symlink. */ ni->i_valid = inode->i_size; /* Clear directory bit. */ @@ -420,7 +414,7 @@ end_enum: ni->std_fa &= ~FILE_ATTRIBUTE_DIRECTORY; inode->i_op = &ntfs_link_inode_operations; inode->i_fop = NULL; - inode_nohighmem(inode); // ?? + inode_nohighmem(inode); } else if (S_ISREG(mode)) { ni->std_fa &= ~FILE_ATTRIBUTE_DIRECTORY; inode->i_op = &ntfs_file_inode_operations; -- cgit v1.2.3 From 57116ce17b04fde2fe30f0859df69d8dbe5809f6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 6 Oct 2021 13:58:52 +0200 Subject: workqueue: fix state-dump console deadlock Console drivers often queue work while holding locks also taken in their console write paths, something which can lead to deadlocks on SMP when dumping workqueue state (e.g. sysrq-t or on suspend failures). For serial console drivers this could look like: CPU0 CPU1 ---- ---- show_workqueue_state(); lock(&pool->lock); lock(&port->lock); schedule_work(); lock(&pool->lock); printk(); lock(console_owner); lock(&port->lock); where workqueues are, for example, used to push data to the line discipline, process break signals and handle modem-status changes. Line disciplines and serdev drivers can also queue work on write-wakeup notifications, etc. Reworking every console driver to avoid queuing work while holding locks also taken in their write paths would complicate drivers and is neither desirable or feasible. Instead use the deferred-printk mechanism to avoid printing while holding pool locks when dumping workqueue state. Note that there are a few WARN_ON() assertions in the workqueue code which could potentially also trigger a deadlock. Hopefully the ongoing printk rework will provide a general solution for this eventually. This was originally reported after a lockdep splat when executing sysrq-t with the imx serial driver. Fixes: 3494fc30846d ("workqueue: dump workqueues on sysrq-t") Cc: stable@vger.kernel.org # 4.0 Reported-by: Fabio Estevam Tested-by: Fabio Estevam Signed-off-by: Johan Hovold Reviewed-by: John Ogness Signed-off-by: Tejun Heo --- kernel/workqueue.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 33a6b4a2443d..1b3eb1e9531f 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4830,8 +4830,16 @@ void show_workqueue_state(void) for_each_pwq(pwq, wq) { raw_spin_lock_irqsave(&pwq->pool->lock, flags); - if (pwq->nr_active || !list_empty(&pwq->inactive_works)) + if (pwq->nr_active || !list_empty(&pwq->inactive_works)) { + /* + * Defer printing to avoid deadlocks in console + * drivers that queue work while holding locks + * also taken in their write paths. + */ + printk_deferred_enter(); show_pwq(pwq); + printk_deferred_exit(); + } raw_spin_unlock_irqrestore(&pwq->pool->lock, flags); /* * We could be printing a lot from atomic context, e.g. @@ -4849,7 +4857,12 @@ void show_workqueue_state(void) raw_spin_lock_irqsave(&pool->lock, flags); if (pool->nr_workers == pool->nr_idle) goto next_pool; - + /* + * Defer printing to avoid deadlocks in console drivers that + * queue work while holding locks also taken in their write + * paths. + */ + printk_deferred_enter(); pr_info("pool %d:", pool->id); pr_cont_pool_info(pool); pr_cont(" hung=%us workers=%d", @@ -4864,6 +4877,7 @@ void show_workqueue_state(void) first = false; } pr_cont("\n"); + printk_deferred_exit(); next_pool: raw_spin_unlock_irqrestore(&pool->lock, flags); /* -- cgit v1.2.3 From 711885906b5c2df90746a51f4cd674f1ab9fbb1d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 6 Oct 2021 19:34:55 +0200 Subject: x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically This Kconfig option was added initially so that memory encryption is enabled by default on machines which support it. However, devices which have DMA masks that are less than the bit position of the encryption bit, aka C-bit, require the use of an IOMMU or the use of SWIOTLB. If the IOMMU is disabled or in passthrough mode, the kernel would switch to SWIOTLB bounce-buffering for those transfers. In order to avoid that, 2cc13bb4f59f ("iommu: Disable passthrough mode when SME is active") disables the default IOMMU passthrough mode so that devices for which the default 256K DMA is insufficient, can use the IOMMU instead. However 2, there are cases where the IOMMU is disabled in the BIOS, etc. (think the usual hardware folk "oops, I dropped the ball there" cases) or a driver doesn't properly use the DMA APIs or a device has a firmware or hardware bug, e.g.: ea68573d408f ("drm/amdgpu: Fail to load on RAVEN if SME is active") However 3, in the above GPU use case, there are APIs like Vulkan and some OpenGL/OpenCL extensions which are under the assumption that user-allocated memory can be passed in to the kernel driver and both the GPU and CPU can do coherent and concurrent access to the same memory. That cannot work with SWIOTLB bounce buffers, of course. So, in order for those devices to function, drop the "default y" for the SME by default active option so that users who want to have SME enabled, will need to either enable it in their config or use "mem_encrypt=on" on the kernel command line. [ tlendacky: Generalize commit message. ] Fixes: 7744ccdbc16f ("x86/mm: Add Secure Memory Encryption (SME) support") Reported-by: Paul Menzel Signed-off-by: Borislav Petkov Acked-by: Alex Deucher Acked-by: Tom Lendacky Cc: Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de --- arch/x86/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bd70e8a39fbf..d9830e7e1060 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1525,7 +1525,6 @@ config AMD_MEM_ENCRYPT config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT bool "Activate AMD Secure Memory Encryption (SME) by default" - default y depends on AMD_MEM_ENCRYPT help Say yes to have system memory encrypted by default if running on -- cgit v1.2.3 From 2e5809a4ddb15969503e43b06662a9a725f613ea Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Tue, 5 Oct 2021 13:25:29 -0700 Subject: arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE For non-4K PAGE_SIZE configs, the largest gigantic huge page size is CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is 16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the kernel command line so that one gigantic page can be allocated from CMA. However, when adding such an option the following message is produced: hugetlb_cma: cma area should be at least 8796093022208 MiB This is because the calculation for non-4K gigantic page order is incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve(). Fixes: abb7962adc80 ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs") Cc: # 5.9.x Signed-off-by: Mike Kravetz Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com Signed-off-by: Catalin Marinas --- arch/arm64/mm/hugetlbpage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 23505fc35324..a8158c948966 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -43,7 +43,7 @@ void __init arm64_hugetlb_cma_reserve(void) #ifdef CONFIG_ARM64_4K_PAGES order = PUD_SHIFT - PAGE_SHIFT; #else - order = CONT_PMD_SHIFT + PMD_SHIFT - PAGE_SHIFT; + order = CONT_PMD_SHIFT - PAGE_SHIFT; #endif /* * HugeTLB CMA reservation is required for gigantic -- cgit v1.2.3 From 465f15a6d1a8f51f7e09fba12678b39031f63ca9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 23 Sep 2021 15:12:42 +0200 Subject: selftests: nft_nat: add udp hole punch test case Add a test case that demonstrates port shadowing via UDP. ns2 sends packet to ns1, from source port used by a udp service on the router, ns0. Then, ns1 sends packet to ns0:service, but that ends up getting forwarded to ns2. Also add three test cases that demonstrate mitigations: 1. disable use of $port as source from 'unstrusted' origin 2. make the service untracked. This prevents masquerade entries from having any effects. 3. add forced PAT via 'random' mode to translate the "wrong" sport into an acceptable range. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_nat.sh | 145 +++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index d7e07f4c3d7f..da1c1e4b6c86 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -741,6 +741,149 @@ EOF return $lret } +# test port shadowing. +# create two listening services, one on router (ns0), one +# on client (ns2), which is masqueraded from ns1 point of view. +# ns2 sends udp packet coming from service port to ns1, on a highport. +# Later, if n1 uses same highport to connect to ns0:service, packet +# might be port-forwarded to ns2 instead. + +# second argument tells if we expect the 'fake-entry' to take effect +# (CLIENT) or not (ROUTER). +test_port_shadow() +{ + local test=$1 + local expect=$2 + local daddrc="10.0.1.99" + local daddrs="10.0.1.1" + local result="" + local logmsg="" + + echo ROUTER | ip netns exec "$ns0" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 & + nc_r=$! + + echo CLIENT | ip netns exec "$ns2" nc -w 5 -u -l -p 1405 >/dev/null 2>&1 & + nc_c=$! + + # make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405. + echo "fake-entry" | ip netns exec "$ns2" nc -w 1 -p 1405 -u "$daddrc" 41404 > /dev/null + + # ns1 tries to connect to ns0:1405. With default settings this should connect + # to client, it matches the conntrack entry created above. + + result=$(echo "" | ip netns exec "$ns1" nc -w 1 -p 41404 -u "$daddrs" 1405) + + if [ "$result" = "$expect" ] ;then + echo "PASS: portshadow test $test: got reply from ${expect}${logmsg}" + else + echo "ERROR: portshadow test $test: got reply from \"$result\", not $expect as intended" + ret=1 + fi + + kill $nc_r $nc_c 2>/dev/null + + # flush udp entries for next test round, if any + ip netns exec "$ns0" conntrack -F >/dev/null 2>&1 +} + +# This prevents port shadow of router service via packet filter, +# packets claiming to originate from service port from internal +# network are dropped. +test_port_shadow_filter() +{ + local family=$1 + +ip netns exec "$ns0" nft -f /dev/stdin < /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns0" nft -f /dev/stdin < Date: Fri, 8 Oct 2021 07:11:20 +0800 Subject: Revert "drm/mediatek: Clear pending flag when cmdq packet is done" This reverts commit 9efb16c2fdd647d3888fd8dae84509f485cd554e. Commit c1ec54b7b5af ("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb") would cause numerous mtk cmdq mailbox driver warning: WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198 cmdq_task_exec_done+0xb8/0xe0 So revert that patch and all the patches depend on that patch. Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo Serra Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 47 ++++----------------------------- 1 file changed, 5 insertions(+), 42 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 5f81489fc60c..9840b8d035dc 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -267,36 +267,6 @@ static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg) { struct mtk_drm_crtc *mtk_crtc = container_of(cl, struct mtk_drm_crtc, cmdq_cl); struct cmdq_cb_data *data = mssg; - struct mtk_crtc_state *state; - unsigned int i; - - state = to_mtk_crtc_state(mtk_crtc->base.state); - - state->pending_config = false; - - if (mtk_crtc->pending_planes) { - for (i = 0; i < mtk_crtc->layer_nr; i++) { - struct drm_plane *plane = &mtk_crtc->planes[i]; - struct mtk_plane_state *plane_state; - - plane_state = to_mtk_plane_state(plane->state); - - plane_state->pending.config = false; - } - mtk_crtc->pending_planes = false; - } - - if (mtk_crtc->pending_async_planes) { - for (i = 0; i < mtk_crtc->layer_nr; i++) { - struct drm_plane *plane = &mtk_crtc->planes[i]; - struct mtk_plane_state *plane_state; - - plane_state = to_mtk_plane_state(plane->state); - - plane_state->pending.async_config = false; - } - mtk_crtc->pending_async_planes = false; - } mtk_crtc->cmdq_vblank_cnt = 0; mtk_drm_cmdq_pkt_destroy(mtk_crtc->cmdq_chan, data->pkt); @@ -453,8 +423,7 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc, state->pending_vrefresh, 0, cmdq_handle); - if (!cmdq_handle) - state->pending_config = false; + state->pending_config = false; } if (mtk_crtc->pending_planes) { @@ -474,12 +443,9 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc, mtk_ddp_comp_layer_config(comp, local_layer, plane_state, cmdq_handle); - if (!cmdq_handle) - plane_state->pending.config = false; + plane_state->pending.config = false; } - - if (!cmdq_handle) - mtk_crtc->pending_planes = false; + mtk_crtc->pending_planes = false; } if (mtk_crtc->pending_async_planes) { @@ -499,12 +465,9 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc, mtk_ddp_comp_layer_config(comp, local_layer, plane_state, cmdq_handle); - if (!cmdq_handle) - plane_state->pending.async_config = false; + plane_state->pending.async_config = false; } - - if (!cmdq_handle) - mtk_crtc->pending_async_planes = false; + mtk_crtc->pending_async_planes = false; } } -- cgit v1.2.3 From be7d2d837363e2d36bc9d87b89207f1b8f5c997d Mon Sep 17 00:00:00 2001 From: Chun-Kuang Hu Date: Fri, 8 Oct 2021 07:23:02 +0800 Subject: Revert "drm/mediatek: Add cmdq_handle in mtk_crtc" This reverts commit bc9241be73d9b2b3bcb7033598521fd669639848. Commit c1ec54b7b5af ("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb") would cause numerous mtk cmdq mailbox driver warning: WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198 cmdq_task_exec_done+0xb8/0xe0 So revert that patch and all the patches depend on that patch. Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo Serra Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 9840b8d035dc..697c4dec1890 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -54,7 +54,6 @@ struct mtk_drm_crtc { #if IS_REACHABLE(CONFIG_MTK_CMDQ) struct mbox_client cmdq_cl; struct mbox_chan *cmdq_chan; - struct cmdq_pkt cmdq_handle; u32 cmdq_event; u32 cmdq_vblank_cnt; #endif @@ -227,16 +226,19 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc, } #if IS_REACHABLE(CONFIG_MTK_CMDQ) -static int mtk_drm_cmdq_pkt_create(struct mbox_chan *chan, struct cmdq_pkt *pkt, - size_t size) +static struct cmdq_pkt *mtk_drm_cmdq_pkt_create(struct mbox_chan *chan, size_t size) { + struct cmdq_pkt *pkt; struct device *dev; dma_addr_t dma_addr; + pkt = kzalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) + return ERR_PTR(-ENOMEM); pkt->va_base = kzalloc(size, GFP_KERNEL); if (!pkt->va_base) { kfree(pkt); - return -ENOMEM; + return ERR_PTR(-ENOMEM); } pkt->buf_size = size; @@ -247,12 +249,12 @@ static int mtk_drm_cmdq_pkt_create(struct mbox_chan *chan, struct cmdq_pkt *pkt, dev_err(dev, "dma map failed, size=%u\n", (u32)(u64)size); kfree(pkt->va_base); kfree(pkt); - return -ENOMEM; + return ERR_PTR(-ENOMEM); } pkt->pa_base = dma_addr; - return 0; + return pkt; } static void mtk_drm_cmdq_pkt_destroy(struct mbox_chan *chan, struct cmdq_pkt *pkt) @@ -475,7 +477,7 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc, bool needs_vblank) { #if IS_REACHABLE(CONFIG_MTK_CMDQ) - struct cmdq_pkt *cmdq_handle = &mtk_crtc->cmdq_handle; + struct cmdq_pkt *cmdq_handle; #endif struct drm_crtc *crtc = &mtk_crtc->base; struct mtk_drm_private *priv = crtc->dev->dev_private; @@ -515,7 +517,7 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc, #if IS_REACHABLE(CONFIG_MTK_CMDQ) if (mtk_crtc->cmdq_chan) { mbox_flush(mtk_crtc->cmdq_chan, 2000); - cmdq_handle->cmd_buf_size = 0; + cmdq_handle = mtk_drm_cmdq_pkt_create(mtk_crtc->cmdq_chan, PAGE_SIZE); cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event); cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false); mtk_crtc_ddp_config(crtc, cmdq_handle); @@ -910,16 +912,6 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev, drm_crtc_index(&mtk_crtc->base)); mbox_free_channel(mtk_crtc->cmdq_chan); mtk_crtc->cmdq_chan = NULL; - } else { - ret = mtk_drm_cmdq_pkt_create(mtk_crtc->cmdq_chan, - &mtk_crtc->cmdq_handle, - PAGE_SIZE); - if (ret) { - dev_dbg(dev, "mtk_crtc %d failed to create cmdq packet\n", - drm_crtc_index(&mtk_crtc->base)); - mbox_free_channel(mtk_crtc->cmdq_chan); - mtk_crtc->cmdq_chan = NULL; - } } } #endif -- cgit v1.2.3 From 0cf54fff9bcffa69bb96f2da8539858402aea404 Mon Sep 17 00:00:00 2001 From: Chun-Kuang Hu Date: Fri, 8 Oct 2021 07:25:32 +0800 Subject: Revert "drm/mediatek: Detect CMDQ execution timeout" This reverts commit 8cdcb365342402fdeb664479b0a04e9debef8efb. Commit c1ec54b7b5af ("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb") would cause numerous mtk cmdq mailbox driver warning: WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198 cmdq_task_exec_done+0xb8/0xe0 So revert that patch and all the patches depend on that patch. Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo Serra Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 697c4dec1890..0cd5b9ed8956 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -55,7 +55,6 @@ struct mtk_drm_crtc { struct mbox_client cmdq_cl; struct mbox_chan *cmdq_chan; u32 cmdq_event; - u32 cmdq_vblank_cnt; #endif struct device *mmsys_dev; @@ -270,7 +269,6 @@ static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg) struct mtk_drm_crtc *mtk_crtc = container_of(cl, struct mtk_drm_crtc, cmdq_cl); struct cmdq_cb_data *data = mssg; - mtk_crtc->cmdq_vblank_cnt = 0; mtk_drm_cmdq_pkt_destroy(mtk_crtc->cmdq_chan, data->pkt); } #endif @@ -526,11 +524,6 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc, cmdq_handle->pa_base, cmdq_handle->cmd_buf_size, DMA_TO_DEVICE); - /* - * CMDQ command should execute in next vblank, - * If it fail to execute in next 2 vblank, timeout happen. - */ - mtk_crtc->cmdq_vblank_cnt = 2; mbox_send_message(mtk_crtc->cmdq_chan, cmdq_handle); mbox_client_txdone(mtk_crtc->cmdq_chan, 0); } @@ -547,14 +540,11 @@ static void mtk_crtc_ddp_irq(void *data) #if IS_REACHABLE(CONFIG_MTK_CMDQ) if (!priv->data->shadow_register && !mtk_crtc->cmdq_chan) - mtk_crtc_ddp_config(crtc, NULL); - else if (mtk_crtc->cmdq_vblank_cnt > 0 && --mtk_crtc->cmdq_vblank_cnt == 0) - DRM_ERROR("mtk_crtc %d CMDQ execute command timeout!\n", - drm_crtc_index(&mtk_crtc->base)); #else if (!priv->data->shadow_register) - mtk_crtc_ddp_config(crtc, NULL); #endif + mtk_crtc_ddp_config(crtc, NULL); + mtk_drm_finish_page_flip(mtk_crtc); } -- cgit v1.2.3 From 8a4a099f843890504d4942b93b3290a53a53ff3a Mon Sep 17 00:00:00 2001 From: Chun-Kuang Hu Date: Fri, 8 Oct 2021 07:27:11 +0800 Subject: Revert "drm/mediatek: Remove struct cmdq_client" This reverts commit f4be17cd5b14dd73545b0e014a63ebe9ab5ef837. Commit c1ec54b7b5af ("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb") would cause numerous mtk cmdq mailbox driver warning: WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198 cmdq_task_exec_done+0xb8/0xe0 So revert that patch and all the patches depend on that patch. Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo Serra Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 80 ++++++++------------------------- 1 file changed, 18 insertions(+), 62 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 0cd5b9ed8956..3f9802d21bf0 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -52,8 +52,7 @@ struct mtk_drm_crtc { bool pending_async_planes; #if IS_REACHABLE(CONFIG_MTK_CMDQ) - struct mbox_client cmdq_cl; - struct mbox_chan *cmdq_chan; + struct cmdq_client *cmdq_client; u32 cmdq_event; #endif @@ -225,51 +224,11 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc, } #if IS_REACHABLE(CONFIG_MTK_CMDQ) -static struct cmdq_pkt *mtk_drm_cmdq_pkt_create(struct mbox_chan *chan, size_t size) -{ - struct cmdq_pkt *pkt; - struct device *dev; - dma_addr_t dma_addr; - - pkt = kzalloc(sizeof(*pkt), GFP_KERNEL); - if (!pkt) - return ERR_PTR(-ENOMEM); - pkt->va_base = kzalloc(size, GFP_KERNEL); - if (!pkt->va_base) { - kfree(pkt); - return ERR_PTR(-ENOMEM); - } - pkt->buf_size = size; - - dev = chan->mbox->dev; - dma_addr = dma_map_single(dev, pkt->va_base, pkt->buf_size, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, dma_addr)) { - dev_err(dev, "dma map failed, size=%u\n", (u32)(u64)size); - kfree(pkt->va_base); - kfree(pkt); - return ERR_PTR(-ENOMEM); - } - - pkt->pa_base = dma_addr; - - return pkt; -} - -static void mtk_drm_cmdq_pkt_destroy(struct mbox_chan *chan, struct cmdq_pkt *pkt) -{ - dma_unmap_single(chan->mbox->dev, pkt->pa_base, pkt->buf_size, - DMA_TO_DEVICE); - kfree(pkt->va_base); - kfree(pkt); -} - static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg) { - struct mtk_drm_crtc *mtk_crtc = container_of(cl, struct mtk_drm_crtc, cmdq_cl); struct cmdq_cb_data *data = mssg; - mtk_drm_cmdq_pkt_destroy(mtk_crtc->cmdq_chan, data->pkt); + cmdq_pkt_destroy(data->pkt); } #endif @@ -513,19 +472,19 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc, mtk_mutex_release(mtk_crtc->mutex); } #if IS_REACHABLE(CONFIG_MTK_CMDQ) - if (mtk_crtc->cmdq_chan) { - mbox_flush(mtk_crtc->cmdq_chan, 2000); - cmdq_handle = mtk_drm_cmdq_pkt_create(mtk_crtc->cmdq_chan, PAGE_SIZE); + if (mtk_crtc->cmdq_client) { + mbox_flush(mtk_crtc->cmdq_client->chan, 2000); + cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE); cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event); cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false); mtk_crtc_ddp_config(crtc, cmdq_handle); cmdq_pkt_finalize(cmdq_handle); - dma_sync_single_for_device(mtk_crtc->cmdq_chan->mbox->dev, + dma_sync_single_for_device(mtk_crtc->cmdq_client->chan->mbox->dev, cmdq_handle->pa_base, cmdq_handle->cmd_buf_size, DMA_TO_DEVICE); - mbox_send_message(mtk_crtc->cmdq_chan, cmdq_handle); - mbox_client_txdone(mtk_crtc->cmdq_chan, 0); + mbox_send_message(mtk_crtc->cmdq_client->chan, cmdq_handle); + mbox_client_txdone(mtk_crtc->cmdq_client->chan, 0); } #endif mtk_crtc->config_updating = false; @@ -539,7 +498,7 @@ static void mtk_crtc_ddp_irq(void *data) struct mtk_drm_private *priv = crtc->dev->dev_private; #if IS_REACHABLE(CONFIG_MTK_CMDQ) - if (!priv->data->shadow_register && !mtk_crtc->cmdq_chan) + if (!priv->data->shadow_register && !mtk_crtc->cmdq_client) #else if (!priv->data->shadow_register) #endif @@ -879,20 +838,17 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev, mutex_init(&mtk_crtc->hw_lock); #if IS_REACHABLE(CONFIG_MTK_CMDQ) - mtk_crtc->cmdq_cl.dev = mtk_crtc->mmsys_dev; - mtk_crtc->cmdq_cl.tx_block = false; - mtk_crtc->cmdq_cl.knows_txdone = true; - mtk_crtc->cmdq_cl.rx_callback = ddp_cmdq_cb; - mtk_crtc->cmdq_chan = - mbox_request_channel(&mtk_crtc->cmdq_cl, - drm_crtc_index(&mtk_crtc->base)); - if (IS_ERR(mtk_crtc->cmdq_chan)) { + mtk_crtc->cmdq_client = + cmdq_mbox_create(mtk_crtc->mmsys_dev, + drm_crtc_index(&mtk_crtc->base)); + if (IS_ERR(mtk_crtc->cmdq_client)) { dev_dbg(dev, "mtk_crtc %d failed to create mailbox client, writing register by CPU now\n", drm_crtc_index(&mtk_crtc->base)); - mtk_crtc->cmdq_chan = NULL; + mtk_crtc->cmdq_client = NULL; } - if (mtk_crtc->cmdq_chan) { + if (mtk_crtc->cmdq_client) { + mtk_crtc->cmdq_client->client.rx_callback = ddp_cmdq_cb; ret = of_property_read_u32_index(priv->mutex_node, "mediatek,gce-events", drm_crtc_index(&mtk_crtc->base), @@ -900,8 +856,8 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev, if (ret) { dev_dbg(dev, "mtk_crtc %d failed to get mediatek,gce-events property\n", drm_crtc_index(&mtk_crtc->base)); - mbox_free_channel(mtk_crtc->cmdq_chan); - mtk_crtc->cmdq_chan = NULL; + cmdq_mbox_destroy(mtk_crtc->cmdq_client); + mtk_crtc->cmdq_client = NULL; } } #endif -- cgit v1.2.3 From 4157a441ff068cc406513e7b8069efa19bba89d0 Mon Sep 17 00:00:00 2001 From: Chun-Kuang Hu Date: Fri, 8 Oct 2021 07:28:40 +0800 Subject: Revert "drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb" This reverts commit c1ec54b7b5af25c779192253f5a9f05e95cb43d7. Commit c1ec54b7b5af ("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb") would cause numerous mtk cmdq mailbox driver warning: WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198 cmdq_task_exec_done+0xb8/0xe0 So revert that patch. Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo Serra Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 3f9802d21bf0..a4e80e499674 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -4,8 +4,6 @@ */ #include -#include -#include #include #include #include @@ -224,11 +222,9 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc, } #if IS_REACHABLE(CONFIG_MTK_CMDQ) -static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg) +static void ddp_cmdq_cb(struct cmdq_cb_data data) { - struct cmdq_cb_data *data = mssg; - - cmdq_pkt_destroy(data->pkt); + cmdq_pkt_destroy(data.data); } #endif @@ -479,12 +475,7 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc, cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false); mtk_crtc_ddp_config(crtc, cmdq_handle); cmdq_pkt_finalize(cmdq_handle); - dma_sync_single_for_device(mtk_crtc->cmdq_client->chan->mbox->dev, - cmdq_handle->pa_base, - cmdq_handle->cmd_buf_size, - DMA_TO_DEVICE); - mbox_send_message(mtk_crtc->cmdq_client->chan, cmdq_handle); - mbox_client_txdone(mtk_crtc->cmdq_client->chan, 0); + cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle); } #endif mtk_crtc->config_updating = false; @@ -848,7 +839,6 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev, } if (mtk_crtc->cmdq_client) { - mtk_crtc->cmdq_client->client.rx_callback = ddp_cmdq_cb; ret = of_property_read_u32_index(priv->mutex_node, "mediatek,gce-events", drm_crtc_index(&mtk_crtc->base), -- cgit v1.2.3 From 9463b64d1a34fc4d18f9de63f07b2400c86f8da8 Mon Sep 17 00:00:00 2001 From: Kuogee Hsieh Date: Wed, 29 Sep 2021 09:17:04 -0700 Subject: drm/msm/dp: only signal audio when disconnected detected at dp_pm_resume Currently there is audio not working problem after system resume from suspend if hdmi monitor stay plugged in at DUT. However this problem does not happen at normal operation but at a particular test case. The root cause is DP driver signal audio with connected state at resume which trigger audio trying to setup audio data path through DP main link but failed due to display port is not setup and enabled by upper layer framework yet. This patch only have DP driver signal audio only when DP is in disconnected state so that audio option shows correct state after system resume. DP driver will not signal audio with connected state until display enabled executed by upper layer framework where display port is setup completed and main link is running. Changes in V2: -- add details commit text Fixes: afc9b8b6bab8 ("drm/msm/dp: signal audio plugged change at dp_pm_resume") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1632932224-25102-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dp/dp_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index fbe4c2cd52a3..a0392e4d8134 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -1309,14 +1309,14 @@ static int dp_pm_resume(struct device *dev) * can not declared display is connected unless * HDMI cable is plugged in and sink_count of * dongle become 1 + * also only signal audio when disconnected */ - if (dp->link->sink_count) + if (dp->link->sink_count) { dp->dp_display.is_connected = true; - else + } else { dp->dp_display.is_connected = false; - - dp_display_handle_plugged_change(g_dp_display, - dp->dp_display.is_connected); + dp_display_handle_plugged_change(g_dp_display, false); + } DRM_DEBUG_DP("After, sink_count=%d is_connected=%d core_inited=%d power_on=%d\n", dp->link->sink_count, dp->dp_display.is_connected, -- cgit v1.2.3 From efb8a170a367fa898d7848c4e74c1c20222e0d91 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 13 Sep 2021 18:45:56 +0200 Subject: drm/msm: Fix devfreq NULL pointer dereference on a3xx There is no devfreq on a3xx at the moment since gpu_busy is not implemented. This means that msm_devfreq_init() will return early and the entire devfreq setup is skipped. However, msm_devfreq_active() and msm_devfreq_idle() are still called unconditionally later, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4 Hardware name: Longcheer L8150 (DT) pc : mutex_lock_io+0x2bc/0x2f0 lr : msm_devfreq_active+0x3c/0xe0 [msm] Call trace: mutex_lock_io+0x2bc/0x2f0 msm_gpu_submit+0x164/0x180 [msm] msm_job_run+0x54/0xe0 [msm] drm_sched_main+0x2b0/0x4a0 [gpu_sched] kthread+0x154/0x160 ret_from_fork+0x10/0x20 Fix this by adding a check in msm_devfreq_active/idle() which ensures that devfreq was actually initialized earlier. Fixes: 9bc95570175a ("drm/msm: Devfreq tuning") Reported-by: Nikita Travkin Tested-by: Nikita Travkin Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.net Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gpu_devfreq.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_gpu_devfreq.c b/drivers/gpu/drm/msm/msm_gpu_devfreq.c index 0a1ee20296a2..84e98c07c900 100644 --- a/drivers/gpu/drm/msm/msm_gpu_devfreq.c +++ b/drivers/gpu/drm/msm/msm_gpu_devfreq.c @@ -151,6 +151,9 @@ void msm_devfreq_active(struct msm_gpu *gpu) unsigned int idle_time; unsigned long target_freq = df->idle_freq; + if (!df->devfreq) + return; + /* * Hold devfreq lock to synchronize with get_dev_status()/ * target() callbacks @@ -186,6 +189,9 @@ void msm_devfreq_idle(struct msm_gpu *gpu) struct msm_gpu_devfreq *df = &gpu->devfreq; unsigned long idle_freq, target_freq = 0; + if (!df->devfreq) + return; + /* * Hold devfreq lock to synchronize with get_dev_status()/ * target() callbacks -- cgit v1.2.3 From 171316a68d9a8e0d9e28b7cf4c15afc4c6244a4e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 Sep 2021 02:59:13 +0200 Subject: drm/msm: Avoid potential overflow in timeout_to_jiffies() The return type of ktime_divns() is s64. The timeout_to_jiffies() currently assigns the result of this ktime_divns() to unsigned long, which on 32 bit systems may overflow. Furthermore, the result of this function is sometimes also passed to functions which expect signed long, dma_fence_wait_timeout() is one such example. Fix this by adjusting the type of remaining_jiffies to s64, so we do not suffer overflow there, and return a value limited to range of 0..INT_MAX, which is safe for all usecases of this timeout. The above overflow can be triggered if userspace passes in too large timeout value, larger than INT_MAX / HZ seconds. The kernel detects it and complains about "schedule_timeout: wrong timeout value %lx" and generates a warning backtrace. Note that this fixes commit 6cedb8b377bb ("drm/msm: avoid using 'timespec'"), because the previously used timespec_to_jiffies() function returned unsigned long instead of s64: static inline unsigned long timespec_to_jiffies(const struct timespec *value) Fixes: 6cedb8b377bb ("drm/msm: avoid using 'timespec'") Signed-off-by: Marek Vasut Cc: Arnd Bergmann Cc: Jordan Crouse Cc: Rob Clark Cc: stable@vger.kernel.org # 5.6+ Acked-by: Arnd Bergmann Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index e99242164076..c552f0c3890c 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -504,7 +504,7 @@ static inline int align_pitch(int width, int bpp) static inline unsigned long timeout_to_jiffies(const ktime_t *timeout) { ktime_t now = ktime_get(); - unsigned long remaining_jiffies; + s64 remaining_jiffies; if (ktime_compare(*timeout, now) < 0) { remaining_jiffies = 0; @@ -513,7 +513,7 @@ static inline unsigned long timeout_to_jiffies(const ktime_t *timeout) remaining_jiffies = ktime_divns(rem, NSEC_PER_SEC / HZ); } - return remaining_jiffies; + return clamp(remaining_jiffies, 0LL, (s64)INT_MAX); } #endif /* __MSM_DRV_H__ */ -- cgit v1.2.3 From c491a0c7bbf3a64732cb8414021429d15ec08eec Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 25 Sep 2021 22:28:24 +0300 Subject: drm/msm/mdp5: fix cursor-related warnings Since f35a2a99100f ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided. [ 6.556046] ------------[ cut here ]------------ [ 6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func [ 6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0 [ 6.567453] Modules linked in: [ 6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43 [ 6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.587763] Workqueue: events_unbound deferred_probe_work_func [ 6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.599740] pc : drm_mode_config_validate+0x238/0x4d0 [ 6.606596] lr : drm_mode_config_validate+0x238/0x4d0 [ 6.611804] sp : ffff8000121b3980 [ 6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709 [ 6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab [ 6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000 [ 6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.684205] Call trace: [ 6.691319] drm_mode_config_validate+0x238/0x4d0 [ 6.693577] drm_dev_register+0x17c/0x210 [ 6.698435] msm_drm_bind+0x4b4/0x694 [ 6.702429] try_to_bring_up_master+0x164/0x1d0 [ 6.706075] __component_add+0xa0/0x170 [ 6.710415] component_add+0x14/0x20 [ 6.714234] msm_hdmi_dev_probe+0x1c/0x2c [ 6.718053] platform_probe+0x68/0xe0 [ 6.721959] really_probe.part.0+0x9c/0x30c [ 6.725606] __driver_probe_device+0x98/0x144 [ 6.729600] driver_probe_device+0xc8/0x15c [ 6.734114] __device_attach_driver+0xb4/0x120 [ 6.738106] bus_for_each_drv+0x78/0xd0 [ 6.742619] __device_attach+0xdc/0x184 [ 6.746351] device_initial_probe+0x14/0x20 [ 6.750172] bus_probe_device+0x9c/0xa4 [ 6.754337] deferred_probe_work_func+0x88/0xc0 [ 6.758158] process_one_work+0x1d0/0x370 [ 6.762671] worker_thread+0x2c8/0x470 [ 6.766839] kthread+0x15c/0x170 [ 6.770483] ret_from_fork+0x10/0x20 [ 6.773870] ---[ end trace 5884eb76cd26d274 ]--- [ 6.777500] ------------[ cut here ]------------ [ 6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func [ 6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0 [ 6.794362] Modules linked in: [ 6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G W 5.15.0-rc1-dirty #43 [ 6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.816148] Workqueue: events_unbound deferred_probe_work_func [ 6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.828126] pc : drm_mode_config_validate+0x290/0x4d0 [ 6.834981] lr : drm_mode_config_validate+0x290/0x4d0 [ 6.840189] sp : ffff8000121b3980 [ 6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2 [ 6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f [ 6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000 [ 6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.912590] Call trace: [ 6.919702] drm_mode_config_validate+0x290/0x4d0 [ 6.921960] drm_dev_register+0x17c/0x210 [ 6.926821] msm_drm_bind+0x4b4/0x694 [ 6.930813] try_to_bring_up_master+0x164/0x1d0 [ 6.934459] __component_add+0xa0/0x170 [ 6.938799] component_add+0x14/0x20 [ 6.942619] msm_hdmi_dev_probe+0x1c/0x2c [ 6.946438] platform_probe+0x68/0xe0 [ 6.950345] really_probe.part.0+0x9c/0x30c [ 6.953991] __driver_probe_device+0x98/0x144 [ 6.957984] driver_probe_device+0xc8/0x15c [ 6.962498] __device_attach_driver+0xb4/0x120 [ 6.966492] bus_for_each_drv+0x78/0xd0 [ 6.971004] __device_attach+0xdc/0x184 [ 6.974737] device_initial_probe+0x14/0x20 [ 6.978556] bus_probe_device+0x9c/0xa4 [ 6.982722] deferred_probe_work_func+0x88/0xc0 [ 6.986543] process_one_work+0x1d0/0x370 [ 6.991057] worker_thread+0x2c8/0x470 [ 6.995223] kthread+0x15c/0x170 [ 6.998869] ret_from_fork+0x10/0x20 [ 7.002255] ---[ end trace 5884eb76cd26d275 ]--- Fixes: aa649e875daf ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled") Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210925192824.3416259-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c index f482e0911d03..bb7d066618e6 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c @@ -1125,6 +1125,20 @@ static void mdp5_crtc_reset(struct drm_crtc *crtc) __drm_atomic_helper_crtc_reset(crtc, &mdp5_cstate->base); } +static const struct drm_crtc_funcs mdp5_crtc_no_lm_cursor_funcs = { + .set_config = drm_atomic_helper_set_config, + .destroy = mdp5_crtc_destroy, + .page_flip = drm_atomic_helper_page_flip, + .reset = mdp5_crtc_reset, + .atomic_duplicate_state = mdp5_crtc_duplicate_state, + .atomic_destroy_state = mdp5_crtc_destroy_state, + .atomic_print_state = mdp5_crtc_atomic_print_state, + .get_vblank_counter = mdp5_crtc_get_vblank_counter, + .enable_vblank = msm_crtc_enable_vblank, + .disable_vblank = msm_crtc_disable_vblank, + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp, +}; + static const struct drm_crtc_funcs mdp5_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .destroy = mdp5_crtc_destroy, @@ -1313,6 +1327,8 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev, mdp5_crtc->lm_cursor_enabled = cursor_plane ? false : true; drm_crtc_init_with_planes(dev, crtc, plane, cursor_plane, + cursor_plane ? + &mdp5_crtc_no_lm_cursor_funcs : &mdp5_crtc_funcs, NULL); drm_flip_work_init(&mdp5_crtc->unref_cursor_work, -- cgit v1.2.3 From 2133c4fc8e1348dcb752f267a143fe2254613b34 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 29 Sep 2021 13:18:57 +0100 Subject: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107ccf3 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by: Colin Ian King Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/edp/edp_ctrl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c index 4fb397ee7c84..fe1366b4c49f 100644 --- a/drivers/gpu/drm/msm/edp/edp_ctrl.c +++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c @@ -1116,7 +1116,7 @@ void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on) int msm_edp_ctrl_init(struct msm_edp *edp) { struct edp_ctrl *ctrl = NULL; - struct device *dev = &edp->pdev->dev; + struct device *dev; int ret; if (!edp) { @@ -1124,6 +1124,7 @@ int msm_edp_ctrl_init(struct msm_edp *edp) return -EINVAL; } + dev = &edp->pdev->dev; ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); if (!ctrl) return -ENOMEM; -- cgit v1.2.3 From 980d74e7d03ccf2eaa11d133416946bd880c7c08 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Oct 2021 15:57:59 +0300 Subject: drm/msm/a4xx: fix error handling in a4xx_gpu_init() This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20211001125759.GJ2283@kili Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a4xx_gpu.c b/drivers/gpu/drm/msm/adreno/a4xx_gpu.c index 82bebb40234d..a96ee79cc5e0 100644 --- a/drivers/gpu/drm/msm/adreno/a4xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a4xx_gpu.c @@ -699,13 +699,14 @@ struct msm_gpu *a4xx_gpu_init(struct drm_device *dev) } icc_path = devm_of_icc_get(&pdev->dev, "gfx-mem"); - ret = IS_ERR(icc_path); - if (ret) + if (IS_ERR(icc_path)) { + ret = PTR_ERR(icc_path); goto fail; + } ocmem_icc_path = devm_of_icc_get(&pdev->dev, "ocmem"); - ret = IS_ERR(ocmem_icc_path); - if (ret) { + if (IS_ERR(ocmem_icc_path)) { + ret = PTR_ERR(ocmem_icc_path); /* allow -ENODATA, ocmem icc is optional */ if (ret != -ENODATA) goto fail; -- cgit v1.2.3 From 3eda901995371d390ef82d0b6462f4ea8efbcfdf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Oct 2021 15:59:04 +0300 Subject: drm/msm/a3xx: fix error handling in a3xx_gpu_init() These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20211001125904.GK2283@kili Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c index 4534633fe7cd..8fb847c174ff 100644 --- a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c @@ -571,13 +571,14 @@ struct msm_gpu *a3xx_gpu_init(struct drm_device *dev) } icc_path = devm_of_icc_get(&pdev->dev, "gfx-mem"); - ret = IS_ERR(icc_path); - if (ret) + if (IS_ERR(icc_path)) { + ret = PTR_ERR(icc_path); goto fail; + } ocmem_icc_path = devm_of_icc_get(&pdev->dev, "ocmem"); - ret = IS_ERR(ocmem_icc_path); - if (ret) { + if (IS_ERR(ocmem_icc_path)) { + ret = PTR_ERR(ocmem_icc_path); /* allow -ENODATA, ocmem icc is optional */ if (ret != -ENODATA) goto fail; -- cgit v1.2.3 From 6a7e0b0e9fb839caa7c7f25bcf91a95b1c2cbef1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 14 Sep 2021 14:48:31 -0300 Subject: drm/msm: Do not run snapshot on non-DPU devices Since commit 98659487b845 ("drm/msm: add support to take dpu snapshot") the following NULL pointer dereference is seen on i.MX53: [ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0 [ 3.293915] 8<--- cut here --- [ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 3.305244] pgd = (ptrval) [ 3.307989] [00000028] *pgd=00000000 [ 3.311624] Internal error: Oops: 805 [#1] SMP ARM [ 3.316430] Modules linked in: [ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1 [ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support) [ 3.332754] PC is at __mutex_init+0x14/0x54 [ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0 i.MX53 does not use the DPU controller. Fix the problem by only calling msm_disp_snapshot_init() on platforms that use the DPU controller. Cc: stable@vger.kernel.org Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.com Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 4443d7b48618..d4e09703a87d 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -630,10 +630,11 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv) if (ret) goto err_msm_uninit; - ret = msm_disp_snapshot_init(ddev); - if (ret) - DRM_DEV_ERROR(dev, "msm_disp_snapshot_init failed ret = %d\n", ret); - + if (kms) { + ret = msm_disp_snapshot_init(ddev); + if (ret) + DRM_DEV_ERROR(dev, "msm_disp_snapshot_init failed ret = %d\n", ret); + } drm_mode_config_reset(ddev); #ifdef CONFIG_DRM_FBDEV_EMULATION -- cgit v1.2.3 From 3431c17b75c62f8a28db887441bced2007bd3ffc Mon Sep 17 00:00:00 2001 From: Robert Foss Date: Thu, 19 Aug 2021 15:36:36 +0200 Subject: drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register Both PINGPONG4 and PINGPONG5 IRQ registers are using the same address, which is incorrect. PINGPONG4 should use the register offset 30, and PINGPONG5 should use the register offset 31 according to the downstream driver. Fixes: 667e9985ee24 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog") Signed-off-by: Robert Foss Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210819133636.2045766-1-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b131fd376192..700d65e39feb 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -794,7 +794,7 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = { DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1), PP_BLK("pingpong_5", PINGPONG_5, 0x72800, MERGE_3D_2, sdm845_pp_sblk, - DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1), }; -- cgit v1.2.3 From ad69b73add8967bc92b62a1cf23a911705781488 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 21 Sep 2021 19:22:45 +0300 Subject: drm/msm/dsi/phy: fix clock names in 28nm_8960 phy The commit 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") mistakenly changed registered clock names. While the platform is in progress of migration to using clock properties in the dts rather than the global clock names, we should provide backwards compatibility. Thus restore registerd global clock names. Fixes: 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c index aaa37456f4ee..71ed4aa0dc67 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c @@ -428,7 +428,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov bytediv->reg = pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9; snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->phy->id); - snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->phy->id); + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->phy->id + 1); bytediv_init.name = clk_name; bytediv_init.ops = &clk_bytediv_ops; @@ -442,7 +442,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov return ret; provided_clocks[DSI_BYTE_PLL_CLK] = &bytediv->hw; - snprintf(clk_name, 32, "dsi%dpll", pll_28nm->phy->id); + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->phy->id + 1); /* DIV3 */ hw = devm_clk_hw_register_divider(dev, clk_name, parent_name, 0, pll_28nm->phy->pll_base + -- cgit v1.2.3 From 90b7c1c66132c20e8a550006011a3cbfb73dbfc1 Mon Sep 17 00:00:00 2001 From: Marijn Suijten Date: Mon, 6 Sep 2021 22:25:51 +0200 Subject: drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index d13552b2213b..5b4e991f220d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, u32 nb_tries, u32 timeout_us) { - bool pll_locked = false; + bool pll_locked = false, pll_ready = false; void __iomem *base = pll_14nm->phy->pll_base; u32 tries, val; tries = nb_tries; while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val & BIT(5)); if (pll_locked) @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, udelay(timeout_us); } - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); + if (!pll_locked) + goto out; - if (pll_locked) - break; + tries = nb_tries; + while (tries--) { + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val & BIT(0)); - udelay(timeout_us); - } + if (pll_ready) + break; + + udelay(timeout_us); } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); +out: + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); - return pll_locked; + return pll_locked && pll_ready; } static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) -- cgit v1.2.3 From 739b4e7756d3301dd673ca517afca46a5f635562 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Oct 2021 15:33:08 +0300 Subject: drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index 614dc7f26f2c..75ae3008b68f 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -215,8 +215,10 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } - if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) + if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) { + ret = -EINVAL; goto fail; + } msm_dsi->encoder = encoder; -- cgit v1.2.3 From c8f01ffc83923a91e8087aaa077de13354a7aa59 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Oct 2021 15:34:09 +0300 Subject: drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index e269df285136..c86b5090fae6 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -451,7 +451,7 @@ static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host) return 0; err: - for (; i > 0; i--) + while (--i >= 0) clk_disable_unprepare(msm_host->bus_clks[i]); return ret; -- cgit v1.2.3 From 013923477cb311293df9079332cf8b806ed0e6f2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 6 Oct 2021 10:34:19 +0300 Subject: pata_legacy: fix a couple uninitialized variable bugs The last byte of "pad" is used without being initialized. Fixes: 55dba3120fbc ("libata: update ->data_xfer hook for ATAPI") Signed-off-by: Dan Carpenter Signed-off-by: Damien Le Moal --- drivers/ata/pata_legacy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index c3e6592712c4..0a8bf09a5c19 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -352,7 +352,8 @@ static unsigned int pdc_data_xfer_vlb(struct ata_queued_cmd *qc, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad; + __le32 pad = 0; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); @@ -742,7 +743,8 @@ static unsigned int vlb32_data_xfer(struct ata_queued_cmd *qc, ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad; + __le32 pad = 0; + if (rw == WRITE) { memcpy(&pad, buf + buflen - slop, slop); iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); -- cgit v1.2.3 From 0edf0824e0dc359ed76bf96af986e6570ca2c0b9 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 8 Oct 2021 14:59:45 -0700 Subject: af_unix: Rename UNIX-DGRAM to UNIX to maintain backwards compatability Then name of this protocol changed in commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") because that commit added stream support to the af_unix protocol. Renaming the existing protocol makes a ChromeOS protocol test[1] fail now that the name has changed in /proc/net/protocols from "UNIX" to "UNIX-DGRAM". Let's put the name back to how it was while keeping the stream protocol as "UNIX-STREAM" so that the procfs interface doesn't change. This fixes the test and maintains backwards compatibility in proc. Cc: Jiang Wang Cc: Andrii Nakryiko Cc: Cong Wang Cc: Jakub Sitnicki Cc: John Fastabend Cc: Dmitry Osipenko Link: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/tast-tests/src/chromiumos/tast/local/bundles/cros/network/supported_protocols.go;l=50;drc=e8b1c3f94cb40a054f4aa1ef1aff61e75dc38f18 [1] Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- net/unix/af_unix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 0878ab86597b..89f9e85ae970 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -828,7 +828,7 @@ static void unix_unhash(struct sock *sk) } struct proto unix_dgram_proto = { - .name = "UNIX-DGRAM", + .name = "UNIX", .owner = THIS_MODULE, .obj_size = sizeof(struct unix_sock), .close = unix_close, -- cgit v1.2.3 From 74a3bc42fe514098030a78c1ad5e6024463dd378 Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Mon, 11 Oct 2021 10:27:41 +0800 Subject: net: mscc: ocelot: Fix dumplicated argument in ocelot Fix the following coccicheck warning: drivers/net/ethernet/mscc/ocelot.c:474:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot.c:476:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot_net.c:1627:duplicated argument to & or | These DEV_CLOCK_CFG_MAC_TX_RST are duplicate here. Here should be DEV_CLOCK_CFG_MAC_RX_RST. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Wan Jiabing Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 4 ++-- drivers/net/ethernet/mscc/ocelot_net.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 559177e6ded4..4de58321907c 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -472,9 +472,9 @@ void ocelot_phylink_mac_link_down(struct ocelot *ocelot, int port, !(quirks & OCELOT_QUIRK_QSGMII_PORTS_MUST_BE_UP)) ocelot_port_rmwl(ocelot_port, DEV_CLOCK_CFG_MAC_TX_RST | - DEV_CLOCK_CFG_MAC_TX_RST, + DEV_CLOCK_CFG_MAC_RX_RST, DEV_CLOCK_CFG_MAC_TX_RST | - DEV_CLOCK_CFG_MAC_TX_RST, + DEV_CLOCK_CFG_MAC_RX_RST, DEV_CLOCK_CFG); } EXPORT_SYMBOL_GPL(ocelot_phylink_mac_link_down); diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c index e54b9fb2a97a..2a85bcb5d0c2 100644 --- a/drivers/net/ethernet/mscc/ocelot_net.c +++ b/drivers/net/ethernet/mscc/ocelot_net.c @@ -1625,7 +1625,7 @@ static int ocelot_port_phylink_create(struct ocelot *ocelot, int port, if (phy_mode == PHY_INTERFACE_MODE_QSGMII) ocelot_port_rmwl(ocelot_port, 0, DEV_CLOCK_CFG_MAC_TX_RST | - DEV_CLOCK_CFG_MAC_TX_RST, + DEV_CLOCK_CFG_MAC_RX_RST, DEV_CLOCK_CFG); ocelot_port->phy_mode = phy_mode; -- cgit v1.2.3 From 4a3e0aeddf091f00974b02627c157843ce382a24 Mon Sep 17 00:00:00 2001 From: Maarten Zanders Date: Mon, 11 Oct 2021 16:27:20 +0200 Subject: net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's mv88e6xxx_port_ppu_updates() interpretes data in the PORT_STS register incorrectly for internal ports (ie no PPU). In these cases, the PHY_DETECT bit indicates link status. This results in forcing the MAC state whenever the PHY link goes down which is not intended. As a side effect, LED's configured to show link status stay lit even though the physical link is down. Add a check in mac_link_down and mac_link_up to see if it concerns an external port and only then, look at PPU status. Fixes: 5d5b231da7ac (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down) Reported-by: Maarten Zanders Reviewed-by: Maxime Chevallier Signed-off-by: Maarten Zanders Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d7b29792732b..8dadcae93c9b 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -750,7 +750,11 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, ops = chip->info->ops; mv88e6xxx_reg_lock(chip); - if ((!mv88e6xxx_port_ppu_updates(chip, port) || + /* Internal PHYs propagate their configuration directly to the MAC. + * External PHYs depend on whether the PPU is enabled for this port. + */ + if (((!mv88e6xxx_phy_is_internal(ds, port) && + !mv88e6xxx_port_ppu_updates(chip, port)) || mode == MLO_AN_FIXED) && ops->port_sync_link) err = ops->port_sync_link(chip, port, mode, false); mv88e6xxx_reg_unlock(chip); @@ -773,7 +777,12 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, ops = chip->info->ops; mv88e6xxx_reg_lock(chip); - if (!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) { + /* Internal PHYs propagate their configuration directly to the MAC. + * External PHYs depend on whether the PPU is enabled for this port. + */ + if ((!mv88e6xxx_phy_is_internal(ds, port) && + !mv88e6xxx_port_ppu_updates(chip, port)) || + mode == MLO_AN_FIXED) { /* FIXME: for an automedia port, should we force the link * down here - what if the link comes up due to "other" media * while we're bringing the port up, how is the exclusivity -- cgit v1.2.3 From 9973a43012b6ad1720dbc4d5faf5302c28635b8c Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Mon, 11 Oct 2021 17:22:49 +0200 Subject: r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256 Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d05a2a1 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69301c7 ("net/usb: new driver for RTL8152") Signed-off-by: Vegard Nossum Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 4c5d69732a7e..f87f17503373 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -99,6 +99,10 @@ config USB_RTL8150 config USB_RTL8152 tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" select MII + select CRC32 + select CRYPTO + select CRYPTO_HASH + select CRYPTO_SHA256 help This option adds support for Realtek RTL8152 based USB 2.0 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000 -- cgit v1.2.3 From ef1100ef20f29aec4e62abeccdb5bdbebba1e378 Mon Sep 17 00:00:00 2001 From: Arun Ramadoss Date: Mon, 11 Oct 2021 21:18:08 +0530 Subject: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work Fixes: 469b390e1ba3 ("net: dsa: microchip: use delayed_work instead of timer + work") Signed-off-by: Arun Ramadoss Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 1542bfb8b5e5..7c2968a639eb 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -449,8 +449,10 @@ EXPORT_SYMBOL(ksz_switch_register); void ksz_switch_remove(struct ksz_device *dev) { /* timer started */ - if (dev->mib_read_interval) + if (dev->mib_read_interval) { + dev->mib_read_interval = 0; cancel_delayed_work_sync(&dev->mib_read); + } dev->dev_ops->exit(dev); dsa_unregister_switch(dev->ds); -- cgit v1.2.3 From aa18457c4af7a9dad1f2b150b11beae1d8ab57aa Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Mon, 11 Oct 2021 15:49:03 +0100 Subject: ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets Ensure the default 0dB playback path is always used. The code that set FULL_SCALE_VOL based on LOAD_DET_RCSTAT was spurious, and resulted in a -6dB attenuation being accidentally inserted into the playback path. Signed-off-by: Stefan Binding Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20211011144903.28915-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l42.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index fb1e4c33e27d..9a463ab54bdd 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -922,7 +922,6 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream) struct snd_soc_component *component = dai->component; struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component); unsigned int regval; - u8 fullScaleVol; int ret; if (mute) { @@ -993,20 +992,11 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream) cs42l42->stream_use |= 1 << stream; if (stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* Read the headphone load */ - regval = snd_soc_component_read(component, CS42L42_LOAD_DET_RCSTAT); - if (((regval & CS42L42_RLA_STAT_MASK) >> CS42L42_RLA_STAT_SHIFT) == - CS42L42_RLA_STAT_15_OHM) { - fullScaleVol = CS42L42_HP_FULL_SCALE_VOL_MASK; - } else { - fullScaleVol = 0; - } - - /* Un-mute the headphone, set the full scale volume flag */ + /* Un-mute the headphone */ snd_soc_component_update_bits(component, CS42L42_HP_CTL, CS42L42_HP_ANA_AMUTE_MASK | - CS42L42_HP_ANA_BMUTE_MASK | - CS42L42_HP_FULL_SCALE_VOL_MASK, fullScaleVol); + CS42L42_HP_ANA_BMUTE_MASK, + 0); } } -- cgit v1.2.3 From 2bbc977ca689e5e18e8cf98f68854f92bd053c97 Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Mon, 11 Oct 2021 20:04:11 +0200 Subject: ipv6: ioam: move the check for undefined bits The check for undefined bits in the trace type is moved from the input side to the output side, while the input side is relaxed and now inserts default empty values when an undefined bit is set. Signed-off-by: Justin Iurman Signed-off-by: David S. Miller --- net/ipv6/ioam6.c | 70 +++++++++++++++++++++++++++++++++++++++++------ net/ipv6/ioam6_iptunnel.c | 6 +++- 2 files changed, 67 insertions(+), 9 deletions(-) diff --git a/net/ipv6/ioam6.c b/net/ipv6/ioam6.c index 5e8961004832..d128172bb549 100644 --- a/net/ipv6/ioam6.c +++ b/net/ipv6/ioam6.c @@ -770,6 +770,66 @@ static void __ioam6_fill_trace_data(struct sk_buff *skb, data += sizeof(__be32); } + /* bit12 undefined: filled with empty value */ + if (trace->type.bit12) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit13 undefined: filled with empty value */ + if (trace->type.bit13) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit14 undefined: filled with empty value */ + if (trace->type.bit14) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit15 undefined: filled with empty value */ + if (trace->type.bit15) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit16 undefined: filled with empty value */ + if (trace->type.bit16) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit17 undefined: filled with empty value */ + if (trace->type.bit17) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit18 undefined: filled with empty value */ + if (trace->type.bit18) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit19 undefined: filled with empty value */ + if (trace->type.bit19) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit20 undefined: filled with empty value */ + if (trace->type.bit20) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + + /* bit21 undefined: filled with empty value */ + if (trace->type.bit21) { + *(__be32 *)data = cpu_to_be32(IOAM6_U32_UNAVAILABLE); + data += sizeof(__be32); + } + /* opaque state snapshot */ if (trace->type.bit22) { if (!sc) { @@ -791,16 +851,10 @@ void ioam6_fill_trace_data(struct sk_buff *skb, struct ioam6_schema *sc; u8 sclen = 0; - /* Skip if Overflow flag is set OR - * if an unknown type (bit 12-21) is set + /* Skip if Overflow flag is set */ - if (trace->overflow || - trace->type.bit12 | trace->type.bit13 | trace->type.bit14 | - trace->type.bit15 | trace->type.bit16 | trace->type.bit17 | - trace->type.bit18 | trace->type.bit19 | trace->type.bit20 | - trace->type.bit21) { + if (trace->overflow) return; - } /* NodeLen does not include Opaque State Snapshot length. We need to * take it into account if the corresponding bit is set (bit 22) and diff --git a/net/ipv6/ioam6_iptunnel.c b/net/ipv6/ioam6_iptunnel.c index f9ee04541c17..9b7b726f8f45 100644 --- a/net/ipv6/ioam6_iptunnel.c +++ b/net/ipv6/ioam6_iptunnel.c @@ -75,7 +75,11 @@ static bool ioam6_validate_trace_hdr(struct ioam6_trace_hdr *trace) u32 fields; if (!trace->type_be32 || !trace->remlen || - trace->remlen > IOAM6_TRACE_DATA_SIZE_MAX / 4) + trace->remlen > IOAM6_TRACE_DATA_SIZE_MAX / 4 || + trace->type.bit12 | trace->type.bit13 | trace->type.bit14 | + trace->type.bit15 | trace->type.bit16 | trace->type.bit17 | + trace->type.bit18 | trace->type.bit19 | trace->type.bit20 | + trace->type.bit21) return false; trace->nodelen = 0; -- cgit v1.2.3 From 7b1700e009cc17702e8db3af1d983860c0eb7164 Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Mon, 11 Oct 2021 20:04:12 +0200 Subject: selftests: net: modify IOAM tests for undef bits The output behavior for undefined bits is now directly tested inside the bash script. Trying to set an undefined bit should be refused. The input behavior for undefined bits has been removed due to the fact that we would need another sender allowed to set undefined bits. Signed-off-by: Justin Iurman Signed-off-by: David S. Miller --- tools/testing/selftests/net/ioam6.sh | 26 ++++- tools/testing/selftests/net/ioam6_parser.c | 164 +++++++++++------------------ 2 files changed, 81 insertions(+), 109 deletions(-) diff --git a/tools/testing/selftests/net/ioam6.sh b/tools/testing/selftests/net/ioam6.sh index 3caf72bb9c6a..a2489ec398fe 100755 --- a/tools/testing/selftests/net/ioam6.sh +++ b/tools/testing/selftests/net/ioam6.sh @@ -468,10 +468,26 @@ out_bits() for i in {0..22} do ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace \ - prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} dev veth0 - - run_test "out_bit$i" "${desc//$i}" ioam-node-alpha ioam-node-beta \ - db01::2 db01::1 veth0 ${bit2type[$i]} 123 + prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} \ + dev veth0 &>/dev/null + + local cmd_res=$? + local descr="${desc//$i}" + + if [[ $i -ge 12 && $i -le 21 ]] + then + if [ $cmd_res != 0 ] + then + npassed=$((npassed+1)) + log_test_passed "$descr" + else + nfailed=$((nfailed+1)) + log_test_failed "$descr" + fi + else + run_test "out_bit$i" "$descr" ioam-node-alpha ioam-node-beta \ + db01::2 db01::1 veth0 ${bit2type[$i]} 123 + fi done bit2size[22]=$tmp @@ -544,7 +560,7 @@ in_bits() local tmp=${bit2size[22]} bit2size[22]=$(( $tmp + ${#BETA[9]} + ((4 - (${#BETA[9]} % 4)) % 4) )) - for i in {0..22} + for i in {0..11} {22..22} do ip -netns ioam-node-alpha route change db01::/64 encap ioam6 trace \ prealloc type ${bit2type[$i]} ns 123 size ${bit2size[$i]} dev veth0 diff --git a/tools/testing/selftests/net/ioam6_parser.c b/tools/testing/selftests/net/ioam6_parser.c index d376cb2c383c..8f6997d35816 100644 --- a/tools/testing/selftests/net/ioam6_parser.c +++ b/tools/testing/selftests/net/ioam6_parser.c @@ -94,16 +94,6 @@ enum { TEST_OUT_BIT9, TEST_OUT_BIT10, TEST_OUT_BIT11, - TEST_OUT_BIT12, - TEST_OUT_BIT13, - TEST_OUT_BIT14, - TEST_OUT_BIT15, - TEST_OUT_BIT16, - TEST_OUT_BIT17, - TEST_OUT_BIT18, - TEST_OUT_BIT19, - TEST_OUT_BIT20, - TEST_OUT_BIT21, TEST_OUT_BIT22, TEST_OUT_FULL_SUPP_TRACE, @@ -125,16 +115,6 @@ enum { TEST_IN_BIT9, TEST_IN_BIT10, TEST_IN_BIT11, - TEST_IN_BIT12, - TEST_IN_BIT13, - TEST_IN_BIT14, - TEST_IN_BIT15, - TEST_IN_BIT16, - TEST_IN_BIT17, - TEST_IN_BIT18, - TEST_IN_BIT19, - TEST_IN_BIT20, - TEST_IN_BIT21, TEST_IN_BIT22, TEST_IN_FULL_SUPP_TRACE, @@ -199,30 +179,6 @@ static int check_ioam_header(int tid, struct ioam6_trace_hdr *ioam6h, ioam6h->nodelen != 2 || ioam6h->remlen; - case TEST_OUT_BIT12: - case TEST_IN_BIT12: - case TEST_OUT_BIT13: - case TEST_IN_BIT13: - case TEST_OUT_BIT14: - case TEST_IN_BIT14: - case TEST_OUT_BIT15: - case TEST_IN_BIT15: - case TEST_OUT_BIT16: - case TEST_IN_BIT16: - case TEST_OUT_BIT17: - case TEST_IN_BIT17: - case TEST_OUT_BIT18: - case TEST_IN_BIT18: - case TEST_OUT_BIT19: - case TEST_IN_BIT19: - case TEST_OUT_BIT20: - case TEST_IN_BIT20: - case TEST_OUT_BIT21: - case TEST_IN_BIT21: - return ioam6h->overflow || - ioam6h->nodelen || - ioam6h->remlen != 1; - case TEST_OUT_BIT22: case TEST_IN_BIT22: return ioam6h->overflow || @@ -326,6 +282,66 @@ static int check_ioam6_data(__u8 **p, struct ioam6_trace_hdr *ioam6h, *p += sizeof(__u32); } + if (ioam6h->type.bit12) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit13) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit14) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit15) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit16) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit17) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit18) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit19) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit20) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + + if (ioam6h->type.bit21) { + if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff) + return 1; + *p += sizeof(__u32); + } + if (ioam6h->type.bit22) { len = cnf.sc_data ? strlen(cnf.sc_data) : 0; aligned = cnf.sc_data ? __ALIGN_KERNEL(len, 4) : 0; @@ -455,26 +471,6 @@ static int str2id(const char *tname) return TEST_OUT_BIT10; if (!strcmp("out_bit11", tname)) return TEST_OUT_BIT11; - if (!strcmp("out_bit12", tname)) - return TEST_OUT_BIT12; - if (!strcmp("out_bit13", tname)) - return TEST_OUT_BIT13; - if (!strcmp("out_bit14", tname)) - return TEST_OUT_BIT14; - if (!strcmp("out_bit15", tname)) - return TEST_OUT_BIT15; - if (!strcmp("out_bit16", tname)) - return TEST_OUT_BIT16; - if (!strcmp("out_bit17", tname)) - return TEST_OUT_BIT17; - if (!strcmp("out_bit18", tname)) - return TEST_OUT_BIT18; - if (!strcmp("out_bit19", tname)) - return TEST_OUT_BIT19; - if (!strcmp("out_bit20", tname)) - return TEST_OUT_BIT20; - if (!strcmp("out_bit21", tname)) - return TEST_OUT_BIT21; if (!strcmp("out_bit22", tname)) return TEST_OUT_BIT22; if (!strcmp("out_full_supp_trace", tname)) @@ -509,26 +505,6 @@ static int str2id(const char *tname) return TEST_IN_BIT10; if (!strcmp("in_bit11", tname)) return TEST_IN_BIT11; - if (!strcmp("in_bit12", tname)) - return TEST_IN_BIT12; - if (!strcmp("in_bit13", tname)) - return TEST_IN_BIT13; - if (!strcmp("in_bit14", tname)) - return TEST_IN_BIT14; - if (!strcmp("in_bit15", tname)) - return TEST_IN_BIT15; - if (!strcmp("in_bit16", tname)) - return TEST_IN_BIT16; - if (!strcmp("in_bit17", tname)) - return TEST_IN_BIT17; - if (!strcmp("in_bit18", tname)) - return TEST_IN_BIT18; - if (!strcmp("in_bit19", tname)) - return TEST_IN_BIT19; - if (!strcmp("in_bit20", tname)) - return TEST_IN_BIT20; - if (!strcmp("in_bit21", tname)) - return TEST_IN_BIT21; if (!strcmp("in_bit22", tname)) return TEST_IN_BIT22; if (!strcmp("in_full_supp_trace", tname)) @@ -606,16 +582,6 @@ static int (*func[__TEST_MAX])(int, struct ioam6_trace_hdr *, __u32, __u16) = { [TEST_OUT_BIT9] = check_ioam_header_and_data, [TEST_OUT_BIT10] = check_ioam_header_and_data, [TEST_OUT_BIT11] = check_ioam_header_and_data, - [TEST_OUT_BIT12] = check_ioam_header, - [TEST_OUT_BIT13] = check_ioam_header, - [TEST_OUT_BIT14] = check_ioam_header, - [TEST_OUT_BIT15] = check_ioam_header, - [TEST_OUT_BIT16] = check_ioam_header, - [TEST_OUT_BIT17] = check_ioam_header, - [TEST_OUT_BIT18] = check_ioam_header, - [TEST_OUT_BIT19] = check_ioam_header, - [TEST_OUT_BIT20] = check_ioam_header, - [TEST_OUT_BIT21] = check_ioam_header, [TEST_OUT_BIT22] = check_ioam_header_and_data, [TEST_OUT_FULL_SUPP_TRACE] = check_ioam_header_and_data, [TEST_IN_UNDEF_NS] = check_ioam_header, @@ -633,16 +599,6 @@ static int (*func[__TEST_MAX])(int, struct ioam6_trace_hdr *, __u32, __u16) = { [TEST_IN_BIT9] = check_ioam_header_and_data, [TEST_IN_BIT10] = check_ioam_header_and_data, [TEST_IN_BIT11] = check_ioam_header_and_data, - [TEST_IN_BIT12] = check_ioam_header, - [TEST_IN_BIT13] = check_ioam_header, - [TEST_IN_BIT14] = check_ioam_header, - [TEST_IN_BIT15] = check_ioam_header, - [TEST_IN_BIT16] = check_ioam_header, - [TEST_IN_BIT17] = check_ioam_header, - [TEST_IN_BIT18] = check_ioam_header, - [TEST_IN_BIT19] = check_ioam_header, - [TEST_IN_BIT20] = check_ioam_header, - [TEST_IN_BIT21] = check_ioam_header, [TEST_IN_BIT22] = check_ioam_header_and_data, [TEST_IN_FULL_SUPP_TRACE] = check_ioam_header_and_data, [TEST_FWD_FULL_SUPP_TRACE] = check_ioam_header_and_data, -- cgit v1.2.3 From 1606520a24542d6566077f99f3678e18d05bdd28 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 6 Oct 2021 18:01:19 +0200 Subject: KVM: s390: remove myself as reviewer I currently don't have time anymore to review KVM/s390 code. Signed-off-by: Cornelia Huck Acked-by: Janosch Frank Acked-by: Christian Borntraeger Link: https://lore.kernel.org/r/20211006160120.217636-2-cohuck@redhat.com Signed-off-by: Vasily Gorbik --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index abdcbcfef73d..0149e1a3e65e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10275,7 +10275,6 @@ KERNEL VIRTUAL MACHINE for s390 (KVM/s390) M: Christian Borntraeger M: Janosch Frank R: David Hildenbrand -R: Cornelia Huck R: Claudio Imbrenda L: kvm@vger.kernel.org S: Supported -- cgit v1.2.3 From 4540938952d47eec558ae69e190e0fe3076ec8ad Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 6 Oct 2021 18:01:20 +0200 Subject: vfio-ccw: step down as maintainer I currently don't have time to act as vfio-ccw maintainer anymore, but I trust that I leave it in capable hands. Signed-off-by: Cornelia Huck Acked-by: Eric Farman Acked-by: Matthew Rosato Acked-by: Christian Borntraeger Link: https://lore.kernel.org/r/20211006160120.217636-3-cohuck@redhat.com Signed-off-by: Vasily Gorbik --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0149e1a3e65e..92db89512678 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16374,7 +16374,6 @@ F: drivers/s390/crypto/vfio_ap_ops.c F: drivers/s390/crypto/vfio_ap_private.h S390 VFIO-CCW DRIVER -M: Cornelia Huck M: Eric Farman M: Matthew Rosato R: Halil Pasic -- cgit v1.2.3 From 8e0ab8e26b72a80e991c66a8abc16e6c856abe3d Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Tue, 5 Oct 2021 14:08:36 +0200 Subject: s390: fix strrchr() implementation Fix two problems found in the strrchr() implementation for s390 architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Heiko Carstens (incorrect behavior with empty strings) Signed-off-by: Roberto Sassu Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/lib/string.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c index cfcdf76d6a95..a95ca6df4e5e 100644 --- a/arch/s390/lib/string.c +++ b/arch/s390/lib/string.c @@ -259,14 +259,13 @@ EXPORT_SYMBOL(strcmp); #ifdef __HAVE_ARCH_STRRCHR char *strrchr(const char *s, int c) { - size_t len = __strend(s) - s; - - if (len) - do { - if (s[len] == (char) c) - return (char *) s + len; - } while (--len > 0); - return NULL; + ssize_t len = __strend(s) - s; + + do { + if (s[len] == (char)c) + return (char *)s + len; + } while (--len >= 0); + return NULL; } EXPORT_SYMBOL(strrchr); #endif -- cgit v1.2.3 From 4d4a223a86afe658cd878800f09458e8bb54415d Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 11 Oct 2021 13:48:06 -0700 Subject: ice: fix locking for Tx timestamp tracking flush Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 715.716857] ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.724637] __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.730210] ? free_module+0x6d0/0x6d0 [ 715.733963] ? task_work_run+0xe1/0x170 [ 715.737803] ? exit_to_user_mode_loop+0x17f/0x1d0 [ 715.742509] ? rcu_read_lock_sched_held+0x12/0x80 [ 715.747215] ? trace_hardirqs_on+0x1c/0x130 [ 715.751401] do_syscall_64+0x3b/0x90 [ 715.754981] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.760033] RIP: 0033:0x7f4dfe59000b [ 715.763612] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 1e 0c 00 f7 d8 64 89 01 48 [ 715.782357] RSP: 002b:00007ffe8c891708 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 715.789923] RAX: ffffffffffffffda RBX: 00005558a20468b0 RCX: 00007f4dfe59000b [ 715.797054] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005558a2046918 [ 715.804189] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 715.811319] R10: 00007f4dfe603ac0 R11: 0000000000000206 R12: 00007ffe8c891940 [ 715.818455] R13: 00007ffe8c8920a3 R14: 00005558a20462a0 R15: 00005558a20468b0 Notice that this is the only case where we use the lock in this way. In the cleanup kthread and work kthread the lock is only taken around the bit accesses. This was done intentionally to avoid this kind of issue. The way the lock is used, we only protect ordering of bit sets vs bit clears. The Tx writers in the hot path don't need to be protected against the entire kthread loop. The Tx queues threads only need to ensure that they do not re-use an index that is currently in use. The cleanup loop does not need to block all new set bits, since it will re-queue itself if new timestamps are present. Fix the tracker flow so that it uses the same flow as the standard cleanup thread. In addition, ensure the in_use bitmap actually gets cleared properly. This fixes the warning and also avoids the potential deadlock that might have occurred otherwise. Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Jacob Keller Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ice/ice_ptp.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 05cc5870e4ef..80380aed8882 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -1313,22 +1313,21 @@ ice_ptp_flush_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx) { u8 idx; - spin_lock(&tx->lock); - for (idx = 0; idx < tx->len; idx++) { u8 phy_idx = idx + tx->quad_offset; - /* Clear any potential residual timestamp in the PHY block */ - if (!pf->hw.reset_ongoing) - ice_clear_phy_tstamp(&pf->hw, tx->quad, phy_idx); - + spin_lock(&tx->lock); if (tx->tstamps[idx].skb) { dev_kfree_skb_any(tx->tstamps[idx].skb); tx->tstamps[idx].skb = NULL; } - } + clear_bit(idx, tx->in_use); + spin_unlock(&tx->lock); - spin_unlock(&tx->lock); + /* Clear any potential residual timestamp in the PHY block */ + if (!pf->hw.reset_ongoing) + ice_clear_phy_tstamp(&pf->hw, tx->quad, phy_idx); + } } /** -- cgit v1.2.3 From 7f565d0ead264329749c0da488de9c8dfa2f18ce Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Tue, 12 Oct 2021 13:01:16 +0530 Subject: tee: optee: Fix missing devices unregister during optee_remove When OP-TEE driver is built as a module, OP-TEE client devices registered on TEE bus during probe should be unregistered during optee_remove. So implement optee_unregister_devices() accordingly. Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reported-by: Sudeep Holla Signed-off-by: Sumit Garg Signed-off-by: Jens Wiklander --- drivers/tee/optee/core.c | 3 +++ drivers/tee/optee/device.c | 22 ++++++++++++++++++++++ drivers/tee/optee/optee_private.h | 1 + 3 files changed, 26 insertions(+) diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 5ce13b099d7d..5363ebebfc35 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -585,6 +585,9 @@ static int optee_remove(struct platform_device *pdev) { struct optee *optee = platform_get_drvdata(pdev); + /* Unregister OP-TEE specific client devices on TEE bus */ + optee_unregister_devices(); + /* * Ask OP-TEE to free all cached shared memory objects to decrease * reference counters and also avoid wild pointers in secure world diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index ec1d24693eba..128a2d2a50a1 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -53,6 +53,13 @@ static int get_devices(struct tee_context *ctx, u32 session, return 0; } +static void optee_release_device(struct device *dev) +{ + struct tee_client_device *optee_device = to_tee_client_device(dev); + + kfree(optee_device); +} + static int optee_register_device(const uuid_t *device_uuid) { struct tee_client_device *optee_device = NULL; @@ -63,6 +70,7 @@ static int optee_register_device(const uuid_t *device_uuid) return -ENOMEM; optee_device->dev.bus = &tee_bus_type; + optee_device->dev.release = optee_release_device; if (dev_set_name(&optee_device->dev, "optee-ta-%pUb", device_uuid)) { kfree(optee_device); return -ENOMEM; @@ -154,3 +162,17 @@ int optee_enumerate_devices(u32 func) { return __optee_enumerate_devices(func); } + +static int __optee_unregister_device(struct device *dev, void *data) +{ + if (!strncmp(dev_name(dev), "optee-ta", strlen("optee-ta"))) + device_unregister(dev); + + return 0; +} + +void optee_unregister_devices(void) +{ + bus_for_each_dev(&tee_bus_type, NULL, NULL, + __optee_unregister_device); +} diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index dbdd367be156..f6bb4a763ba9 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -184,6 +184,7 @@ void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, #define PTA_CMD_GET_DEVICES 0x0 #define PTA_CMD_GET_DEVICES_SUPP 0x1 int optee_enumerate_devices(u32 func); +void optee_unregister_devices(void); /* * Small helpers -- cgit v1.2.3 From a3fd1a986e499a06ac5ef95c3a39aa4611e7444c Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Tue, 12 Oct 2021 19:47:48 +0800 Subject: ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537 Reported-and-tested-by: msd Cc: Signed-off-by: Hui Wang Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bca5830ff706..22d27b12c4e7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10197,6 +10197,9 @@ enum { ALC671_FIXUP_HP_HEADSET_MIC2, ALC662_FIXUP_ACER_X2660G_HEADSET_MODE, ALC662_FIXUP_ACER_NITRO_HEADSET_MODE, + ALC668_FIXUP_ASUS_NO_HEADSET_MIC, + ALC668_FIXUP_HEADSET_MIC, + ALC668_FIXUP_MIC_DET_COEF, }; static const struct hda_fixup alc662_fixups[] = { @@ -10580,6 +10583,29 @@ static const struct hda_fixup alc662_fixups[] = { .chained = true, .chain_id = ALC662_FIXUP_USI_FUNC }, + [ALC668_FIXUP_ASUS_NO_HEADSET_MIC] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x1b, 0x04a1112c }, + { } + }, + .chained = true, + .chain_id = ALC668_FIXUP_HEADSET_MIC + }, + [ALC668_FIXUP_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_headset_mic, + .chained = true, + .chain_id = ALC668_FIXUP_MIC_DET_COEF + }, + [ALC668_FIXUP_MIC_DET_COEF] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x15 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0d60 }, + {} + }, + }, }; static const struct snd_pci_quirk alc662_fixup_tbl[] = { @@ -10615,6 +10641,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16), SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51), SND_PCI_QUIRK(0x1043, 0x17bd, "ASUS N751", ALC668_FIXUP_ASUS_Nx51), + SND_PCI_QUIRK(0x1043, 0x185d, "ASUS G551JW", ALC668_FIXUP_ASUS_NO_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71SL", ALC662_FIXUP_ASUS_MODE8), SND_PCI_QUIRK(0x1043, 0x1b73, "ASUS N55SF", ALC662_FIXUP_BASS_16), SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_BASS_MODE4_CHMAP), -- cgit v1.2.3 From 1ea1dbf1f54c3345072c963b3acf8830e2468c1b Mon Sep 17 00:00:00 2001 From: Sachi King Date: Sat, 2 Oct 2021 14:18:40 +1000 Subject: ACPI: PM: Include alternate AMDI0005 id in special behaviour The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. The AMD0005 needs the same special casing as AMDI0005. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Signed-off-by: Sachi King Reviewed-by: Mario Limonciello Cc: 5.14+ # 5.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/x86/s2idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c index bd92b549fd5a..1c48358b43ba 100644 --- a/drivers/acpi/x86/s2idle.c +++ b/drivers/acpi/x86/s2idle.c @@ -371,7 +371,7 @@ static int lps0_device_attach(struct acpi_device *adev, return 0; if (acpi_s2idle_vendor_amd()) { - /* AMD0004, AMDI0005: + /* AMD0004, AMD0005, AMDI0005: * - Should use rev_id 0x0 * - function mask > 0x3: Should use AMD method, but has off by one bug * - function mask = 0x3: Should use Microsoft method @@ -390,6 +390,7 @@ static int lps0_device_attach(struct acpi_device *adev, ACPI_LPS0_DSM_UUID_MICROSOFT, 0, &lps0_dsm_guid_microsoft); if (lps0_dsm_func_mask > 0x3 && (!strcmp(hid, "AMD0004") || + !strcmp(hid, "AMD0005") || !strcmp(hid, "AMDI0005"))) { lps0_dsm_func_mask = (lps0_dsm_func_mask << 1) | 0x1; acpi_handle_debug(adev->handle, "_DSM UUID %s: Adjusted function mask: 0x%x\n", -- cgit v1.2.3 From 8607954cf255329d1c6dfc073ff1508b7585573c Mon Sep 17 00:00:00 2001 From: Konstantin Komarov Date: Mon, 11 Oct 2021 19:43:29 +0300 Subject: fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list Check for potential NULL pointers. Print error message if found. Thread, that leads to this commit: https://lore.kernel.org/ntfs3/227c13e3-5a22-0cba-41eb-fcaf41940711@paragon-software.com/ Reported-by: Mohammad Rasim Signed-off-by: Konstantin Komarov --- fs/ntfs3/frecord.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index ecb965e4afd0..6f47a9c17f89 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -705,18 +705,35 @@ static int ni_try_remove_attr_list(struct ntfs_inode *ni) continue; mi = ni_find_mi(ni, ino_get(&le->ref)); + if (!mi) { + /* Should never happened, 'cause already checked. */ + goto bad; + } attr = mi_find_attr(mi, NULL, le->type, le_name(le), le->name_len, &le->id); + if (!attr) { + /* Should never happened, 'cause already checked. */ + goto bad; + } asize = le32_to_cpu(attr->size); /* Insert into primary record. */ attr_ins = mi_insert_attr(&ni->mi, le->type, le_name(le), le->name_len, asize, le16_to_cpu(attr->name_off)); - id = attr_ins->id; + if (!attr_ins) { + /* + * Internal error. + * Either no space in primary record (already checked). + * Either tried to insert another + * non indexed attribute (logic error). + */ + goto bad; + } /* Copy all except id. */ + id = attr_ins->id; memcpy(attr_ins, attr, asize); attr_ins->id = id; @@ -732,6 +749,10 @@ static int ni_try_remove_attr_list(struct ntfs_inode *ni) ni->attr_list.dirty = false; return 0; +bad: + ntfs_inode_err(&ni->vfs_inode, "Internal error"); + make_bad_inode(&ni->vfs_inode); + return -EINVAL; } /* -- cgit v1.2.3 From b37a15188eae9d4c49c5bb035e0c8d4058e4d9b3 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Tue, 12 Oct 2021 17:29:35 +0300 Subject: ALSA: hda: avoid write to STATESTS if controller is in reset The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai --- sound/hda/hdac_controller.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 062da7a7a586..f7bd6e2db085 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -421,8 +421,9 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset) if (!full_reset) goto skip_reset; - /* clear STATESTS */ - snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK); + /* clear STATESTS if not in reset */ + if (snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET) + snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK); /* reset controller */ snd_hdac_bus_enter_link_reset(bus); -- cgit v1.2.3 From 13dbc954b3c9a9de0ad5b7279e8d3b708d31068b Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 31 Aug 2021 14:58:42 +0200 Subject: ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index abf8298610a7..43cd71574115 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -217,7 +217,8 @@ }; &pcie0 { - pci@1,0 { + pci@0,0 { + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; ranges; -- cgit v1.2.3 From 3f32472854614d6f53b09b4812372dba9fc5c7de Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 31 Aug 2021 14:58:43 +0200 Subject: ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address The unit address is supposed to represent ','. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 43cd71574115..72ce80fbf266 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -225,8 +225,8 @@ reg = <0 0 0 0 0>; - usb@1,0 { - reg = <0x10000 0 0 0 0>; + usb@0,0 { + reg = <0 0 0 0 0>; resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; }; }; -- cgit v1.2.3 From 50b6cb3516365cb69753b006be2b61c966b70588 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Thu, 7 Oct 2021 21:35:46 -0700 Subject: scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma() After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the hv_storvsc driver sets scsi_driver.can_queue to an integer value that exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets shost->cmd_per_lun to a negative "short" value. Use min_t(int, ...) to work around the issue. Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang Reviewed-by: Ming Lei Reviewed-by: John Garry Signed-off-by: Dexuan Cui Signed-off-by: Martin K. Petersen --- drivers/scsi/hosts.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 3f6f14f0cafb..24b72ee4246f 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -220,7 +220,8 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev, goto fail; } - shost->cmd_per_lun = min_t(short, shost->cmd_per_lun, + /* Use min_t(int, ...) in case shost->can_queue exceeds SHRT_MAX */ + shost->cmd_per_lun = min_t(int, shost->cmd_per_lun, shost->can_queue); error = scsi_init_sense_cache(shost); -- cgit v1.2.3 From 7904022decc260a19dd65b56ac896387f5da6f8c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 Oct 2021 11:44:43 +0300 Subject: block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs These variables are printed on the error path if match_int() fails so they have to be initialized. Fixes: 2958a995edc9 ("block/rnbd-clt: Support polling mode for IO latency optimization") Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions") Signed-off-by: Dan Carpenter Acked-by: Gioh Kim Link: https://lore.kernel.org/r/20211012084443.GA31472@kili Signed-off-by: Jens Axboe --- drivers/block/rnbd/rnbd-clt-sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/block/rnbd/rnbd-clt-sysfs.c b/drivers/block/rnbd/rnbd-clt-sysfs.c index 4b93fd83bf79..44e45af00e83 100644 --- a/drivers/block/rnbd/rnbd-clt-sysfs.c +++ b/drivers/block/rnbd/rnbd-clt-sysfs.c @@ -71,8 +71,10 @@ static int rnbd_clt_parse_map_options(const char *buf, size_t max_path_cnt, int opt_mask = 0; int token; int ret = -EINVAL; - int i, dest_port, nr_poll_queues; + int nr_poll_queues = 0; + int dest_port = 0; int p_cnt = 0; + int i; options = kstrdup(buf, GFP_KERNEL); if (!options) -- cgit v1.2.3 From 596143e3aec35c93508d6b7a05ddc999ee209b61 Mon Sep 17 00:00:00 2001 From: Jackie Liu Date: Mon, 23 Aug 2021 17:25:26 +0800 Subject: acpi/arm64: fix next_platform_timer() section mismatch error Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by: Jackie Liu Acked-by: Hanjun Guo Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by: Catalin Marinas --- drivers/acpi/arm64/gtdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index 0a0a982f9c28..c0e77c1c8e09 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -36,7 +36,7 @@ struct acpi_gtdt_descriptor { static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; -static inline void *next_platform_timer(void *platform_timer) +static inline __init void *next_platform_timer(void *platform_timer) { struct acpi_gtdt_header *gh = platform_timer; -- cgit v1.2.3 From 187a580c9e7895978dcd1e627b9c9e7e3d13ca96 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 10 Oct 2021 11:19:04 -0500 Subject: scsi: iscsi: Fix set_param() handling In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") we meant to add a check where before we call ->set_param() we make sure the iscsi_cls_connection is bound. The problem is that between versions 4 and 5 of the patch the deletion of the unchecked set_param() call was dropped so we ended up with 2 calls. As a result we can still hit a crash where we access the unbound connection on the first call. This patch removes that first call. Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com Reviewed-by: Lee Duncan Reviewed-by: Li Feng Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 922e4c7bd88e..78343d3f9385 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2930,8 +2930,6 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) session->recovery_tmo = value; break; default: - err = transport->set_param(conn, ev->u.set_param.param, - data, ev->u.set_param.len); if ((conn->state == ISCSI_CONN_BOUND) || (conn->state == ISCSI_CONN_UP)) { err = transport->set_param(conn, ev->u.set_param.param, -- cgit v1.2.3 From 2c0468e054c0adb660ac055fc396622ec7235df9 Mon Sep 17 00:00:00 2001 From: Akilesh Kailash Date: Mon, 13 Sep 2021 09:26:42 +0000 Subject: dm verity: skip redundant verity_handle_err() on I/O errors Without FEC, dm-verity won't call verity_handle_err() when I/O fails, but with FEC enabled, it currently does even if an I/O error has occurred. If there is an I/O error and FEC correction fails, return the error instead of calling verity_handle_err() again. Suggested-by: Sami Tolvanen Signed-off-by: Akilesh Kailash Reviewed-by: Sami Tolvanen Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-target.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 22a5ac82446a..88288c8d6bc8 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -475,6 +475,7 @@ static int verity_verify_io(struct dm_verity_io *io) struct bvec_iter start; unsigned b; struct crypto_wait wait; + struct bio *bio = dm_bio_from_per_bio_data(io, v->ti->per_io_data_size); for (b = 0; b < io->n_blocks; b++) { int r; @@ -529,9 +530,17 @@ static int verity_verify_io(struct dm_verity_io *io) else if (verity_fec_decode(v, io, DM_VERITY_BLOCK_TYPE_DATA, cur_block, NULL, &start) == 0) continue; - else if (verity_handle_err(v, DM_VERITY_BLOCK_TYPE_DATA, - cur_block)) - return -EIO; + else { + if (bio->bi_status) { + /* + * Error correction failed; Just return error + */ + return -EIO; + } + if (verity_handle_err(v, DM_VERITY_BLOCK_TYPE_DATA, + cur_block)) + return -EIO; + } } return 0; -- cgit v1.2.3 From ec132ef2d1d94d43d9dce1400521526bbed89a8b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 15 Sep 2021 12:14:40 +0100 Subject: dm clone: make array 'descs' static Don't populate the read-only array descs on the stack but instead it static and add extra const. Also makes the object code smaller by 66 bytes: Before: text data bss dec hex filename 42382 11140 512 54034 d312 ./drivers/md/dm-clone-target.o After: text data bss dec hex filename 42220 11236 512 53968 d2d0 ./drivers/md/dm-clone-target.o (gcc version 11.2.0) Signed-off-by: Colin Ian King Signed-off-by: Mike Snitzer --- drivers/md/dm-clone-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-clone-target.c b/drivers/md/dm-clone-target.c index 84dbe08ad205..edd22e4d65df 100644 --- a/drivers/md/dm-clone-target.c +++ b/drivers/md/dm-clone-target.c @@ -161,7 +161,7 @@ static const char *clone_device_name(struct clone *clone) static void __set_clone_mode(struct clone *clone, enum clone_metadata_mode new_mode) { - const char *descs[] = { + static const char * const descs[] = { "read-write", "read-only", "fail" -- cgit v1.2.3 From b4459b11e84092658fa195a2587aff3b9637f0e7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 23 Sep 2021 17:11:31 +0800 Subject: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. Cc: stable@vger.kernel.org Signed-off-by: Ming Lei Signed-off-by: Mike Snitzer --- drivers/md/dm-rq.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c index 5b95eea517d1..a896dea9750e 100644 --- a/drivers/md/dm-rq.c +++ b/drivers/md/dm-rq.c @@ -490,6 +490,14 @@ static blk_status_t dm_mq_queue_rq(struct blk_mq_hw_ctx *hctx, struct mapped_device *md = tio->md; struct dm_target *ti = md->immutable_target; + /* + * blk-mq's unquiesce may come from outside events, such as + * elevator switch, updating nr_requests or others, and request may + * come during suspend, so simply ask for blk-mq to requeue it. + */ + if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags))) + return BLK_STS_RESOURCE; + if (unlikely(!ti)) { int srcu_idx; struct dm_table *map = dm_get_live_table(md, &srcu_idx); -- cgit v1.2.3 From d208b89401e073de986dc891037c5a668f5d5d95 Mon Sep 17 00:00:00 2001 From: Jiazi Li Date: Wed, 29 Sep 2021 19:59:28 +0800 Subject: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). Cc: stable@vger.kernel.org Signed-off-by: Jiazi Li Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index a011d09cb0fa..76d9da49fda7 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -496,18 +496,17 @@ static void start_io_acct(struct dm_io *io) false, 0, &io->stats_aux); } -static void end_io_acct(struct dm_io *io) +static void end_io_acct(struct mapped_device *md, struct bio *bio, + unsigned long start_time, struct dm_stats_aux *stats_aux) { - struct mapped_device *md = io->md; - struct bio *bio = io->orig_bio; - unsigned long duration = jiffies - io->start_time; + unsigned long duration = jiffies - start_time; - bio_end_io_acct(bio, io->start_time); + bio_end_io_acct(bio, start_time); if (unlikely(dm_stats_used(&md->stats))) dm_stats_account_io(&md->stats, bio_data_dir(bio), bio->bi_iter.bi_sector, bio_sectors(bio), - true, duration, &io->stats_aux); + true, duration, stats_aux); /* nudge anyone waiting on suspend queue */ if (unlikely(wq_has_sleeper(&md->wait))) @@ -790,6 +789,8 @@ void dm_io_dec_pending(struct dm_io *io, blk_status_t error) blk_status_t io_error; struct bio *bio; struct mapped_device *md = io->md; + unsigned long start_time = 0; + struct dm_stats_aux stats_aux; /* Push-back supersedes any I/O errors */ if (unlikely(error)) { @@ -821,8 +822,10 @@ void dm_io_dec_pending(struct dm_io *io, blk_status_t error) } io_error = io->status; - end_io_acct(io); + start_time = io->start_time; + stats_aux = io->stats_aux; free_io(md, io); + end_io_acct(md, bio, start_time, &stats_aux); if (io_error == BLK_STS_DM_REQUEUE) return; -- cgit v1.2.3 From 48827e1d6af58f219e89c7ec08dccbca28c7694e Mon Sep 17 00:00:00 2001 From: Jonas Hahnfeld Date: Tue, 12 Oct 2021 22:09:07 +0200 Subject: ALSA: usb-audio: Add quirk for VF0770 The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld Cc: Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index e03043f7dad3..de18fff69280 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -77,6 +77,48 @@ /* E-Mu 0204 USB */ { USB_DEVICE_VENDOR_SPEC(0x041e, 0x3f19) }, +/* + * Creative Technology, Ltd Live! Cam Sync HD [VF0770] + * The device advertises 8 formats, but only a rate of 48kHz is honored by the + * hardware and 24 bits give chopped audio, so only report the one working + * combination. + */ +{ + USB_DEVICE(0x041e, 0x4095), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = &(const struct snd_usb_audio_quirk[]) { + { + .ifnum = 2, + .type = QUIRK_AUDIO_STANDARD_MIXER, + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .channels = 2, + .fmt_bits = 16, + .iface = 3, + .altsetting = 4, + .altset_idx = 4, + .endpoint = 0x82, + .ep_attr = 0x05, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 }, + }, + }, + { + .ifnum = -1 + }, + }, + }, +}, + /* * HP Wireless Audio * When not ignored, causes instability issues for some users, forcing them to -- cgit v1.2.3 From 2266bb1e122a4f7cdf3427defcfb48e5c6a8f205 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Mon, 13 Sep 2021 15:48:11 +0300 Subject: net/mlx5: Fix cleanup of bridge delayed work Currently, bridge cleanup is calling to cancel_delayed_work(). When this function is finished, there is a chance that the delayed work is still running. Also, the delayed work is queueing itself. As a result, we might execute the delayed work after the bridge cleanup have finished and hit a null-ptr oops[1]. Fix it by using cancel_delayed_work_sync(), which is waiting until the work is done and will cancel the queue work. [1] [ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 8202.144438 ] #PF: supervisor write access in kernel mode [ 8202.145476 ] #PF: error_code(0x0002) - not-present page [ 8202.146520 ] PGD 0 P4D 0 [ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI [ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1 [ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046 [ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000 [ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000 [ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8 [ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000 [ 8202.164018 ] FS: 0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000 [ 8202.164960 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0 [ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8202.168852 ] Call Trace: [ 8202.169421 ] [ 8202.169792 ] __queue_work+0xf2/0x3d0 [ 8202.170481 ] ? queue_work_node+0x40/0x40 [ 8202.171270 ] call_timer_fn+0x2b/0x100 [ 8202.171932 ] __run_timers.part.0+0x152/0x220 [ 8202.172717 ] ? __hrtimer_run_queues+0x171/0x290 [ 8202.173526 ] ? kvm_clock_get_cycles+0xd/0x10 [ 8202.174232 ] ? ktime_get+0x35/0x90 [ 8202.174943 ] run_timer_softirq+0x26/0x50 [ 8202.175745 ] __do_softirq+0xc7/0x271 [ 8202.176373 ] irq_exit_rcu+0x93/0xb0 [ 8202.176983 ] sysvec_apic_timer_interrupt+0x72/0x90 [ 8202.177755 ] [ 8202.178245 ] asm_sysvec_apic_timer_interrupt+0x12/0x20 Fixes: c636a0f0f3f0 ("net/mlx5: Bridge, dynamic entry ageing") Signed-off-by: Shay Drory Reviewed-by: Vlad Buslov Reviewed-by: Leon Romanovsky Reviewed-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c index b5ddaa82755f..c6d2f8c78db7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c @@ -475,9 +475,6 @@ void mlx5e_rep_bridge_init(struct mlx5e_priv *priv) esw_warn(mdev, "Failed to allocate bridge offloads workqueue\n"); goto err_alloc_wq; } - INIT_DELAYED_WORK(&br_offloads->update_work, mlx5_esw_bridge_update_work); - queue_delayed_work(br_offloads->wq, &br_offloads->update_work, - msecs_to_jiffies(MLX5_ESW_BRIDGE_UPDATE_INTERVAL)); br_offloads->nb.notifier_call = mlx5_esw_bridge_switchdev_event; err = register_switchdev_notifier(&br_offloads->nb); @@ -500,6 +497,9 @@ void mlx5e_rep_bridge_init(struct mlx5e_priv *priv) err); goto err_register_netdev; } + INIT_DELAYED_WORK(&br_offloads->update_work, mlx5_esw_bridge_update_work); + queue_delayed_work(br_offloads->wq, &br_offloads->update_work, + msecs_to_jiffies(MLX5_ESW_BRIDGE_UPDATE_INTERVAL)); return; err_register_netdev: @@ -523,10 +523,10 @@ void mlx5e_rep_bridge_cleanup(struct mlx5e_priv *priv) if (!br_offloads) return; + cancel_delayed_work_sync(&br_offloads->update_work); unregister_netdevice_notifier(&br_offloads->netdev_nb); unregister_switchdev_blocking_notifier(&br_offloads->nb_blk); unregister_switchdev_notifier(&br_offloads->nb); - cancel_delayed_work(&br_offloads->update_work); destroy_workqueue(br_offloads->wq); rtnl_lock(); mlx5_esw_bridge_cleanup(esw); -- cgit v1.2.3 From ca20dfda05ae0531c8f5117b6ac989816f6cf658 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 4 Oct 2021 15:04:25 +0300 Subject: net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode Do not allow configurations of MQPRIO channel mode that do not fully define and utilize the channels txqs. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 0c5197f9cea3..336aa07313da 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2981,8 +2981,8 @@ static int mlx5e_mqprio_channel_validate(struct mlx5e_priv *priv, agg_count += mqprio->qopt.count[i]; } - if (priv->channels.params.num_channels < agg_count) { - netdev_err(netdev, "Num of queues (%d) exceeds available (%d)\n", + if (priv->channels.params.num_channels != agg_count) { + netdev_err(netdev, "Num of queues (%d) does not match available (%d)\n", agg_count, priv->channels.params.num_channels); return -EINVAL; } -- cgit v1.2.3 From 94b960b9deffc02fc0747afc01f72cc62ab099e3 Mon Sep 17 00:00:00 2001 From: Valentine Fatiev Date: Sun, 15 Aug 2021 17:43:19 +0300 Subject: net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Valentine Fatiev Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cq.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cq.c b/drivers/net/ethernet/mellanox/mlx5/core/cq.c index cf97985628ab..02e77ffe5c3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cq.c @@ -155,6 +155,8 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq) u32 in[MLX5_ST_SZ_DW(destroy_cq_in)] = {}; int err; + mlx5_debug_cq_remove(dev, cq); + mlx5_eq_del_cq(mlx5_get_async_eq(dev), cq); mlx5_eq_del_cq(&cq->eq->core, cq); @@ -162,16 +164,13 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq) MLX5_SET(destroy_cq_in, in, cqn, cq->cqn); MLX5_SET(destroy_cq_in, in, uid, cq->uid); err = mlx5_cmd_exec_in(dev, destroy_cq, in); - if (err) - return err; synchronize_irq(cq->irqn); - mlx5_debug_cq_remove(dev, cq); mlx5_cq_put(cq); wait_for_completion(&cq->free); - return 0; + return err; } EXPORT_SYMBOL(mlx5_core_destroy_cq); -- cgit v1.2.3 From b2107cdc43d8601f2cadfba990ae844cc1f44e68 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 4 Oct 2021 21:20:25 -0700 Subject: net/mlx5e: Switchdev representors are not vlan challenged Before this patch, mlx5 representors advertised the NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when using reps with vxlan/bridge and maybe other virtual interfaces, when such interfaces inherit this bit and block vlan usage in their topology. Example: $ip link add dev bridge type bridge # add representor interface to the bridge $ip link set dev pf0hpf master $ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q Error: 8021q: VLANs not supported on device. Reps are perfectly capable of handling vlan traffic, although they don't implement vlan_{add,kill}_vid ndos, hence, remove NETIF_F_VLAN_CHALLENGED advertisement. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Reported-by: Roopa Prabhu Signed-off-by: Saeed Mahameed Reviewed-by: Roi Dayan --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 3dd1101cc693..0439203fc7d9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -643,7 +643,6 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev, netdev->hw_features |= NETIF_F_RXCSUM; netdev->features |= netdev->hw_features; - netdev->features |= NETIF_F_VLAN_CHALLENGED; netdev->features |= NETIF_F_NETNS_LOCAL; } -- cgit v1.2.3 From 0bc73ad46a76ed6ece4dcacb28858e7b38561e1c Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Sun, 26 Sep 2021 17:55:41 +0300 Subject: net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 57 +++++++++++++++++++++-- include/linux/mlx5/mlx5_ifc.h | 10 +++- 2 files changed, 60 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 336aa07313da..09c8b71b186c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3325,20 +3325,67 @@ static int set_feature_rx_all(struct net_device *netdev, bool enable) return mlx5_set_port_fcs(mdev, !enable); } +static int mlx5e_set_rx_port_ts(struct mlx5_core_dev *mdev, bool enable) +{ + u32 in[MLX5_ST_SZ_DW(pcmr_reg)] = {}; + bool supported, curr_state; + int err; + + if (!MLX5_CAP_GEN(mdev, ports_check)) + return 0; + + err = mlx5_query_ports_check(mdev, in, sizeof(in)); + if (err) + return err; + + supported = MLX5_GET(pcmr_reg, in, rx_ts_over_crc_cap); + curr_state = MLX5_GET(pcmr_reg, in, rx_ts_over_crc); + + if (!supported || enable == curr_state) + return 0; + + MLX5_SET(pcmr_reg, in, local_port, 1); + MLX5_SET(pcmr_reg, in, rx_ts_over_crc, enable); + + return mlx5_set_ports_check(mdev, in, sizeof(in)); +} + static int set_feature_rx_fcs(struct net_device *netdev, bool enable) { struct mlx5e_priv *priv = netdev_priv(netdev); + struct mlx5e_channels *chs = &priv->channels; + struct mlx5_core_dev *mdev = priv->mdev; int err; mutex_lock(&priv->state_lock); - priv->channels.params.scatter_fcs_en = enable; - err = mlx5e_modify_channels_scatter_fcs(&priv->channels, enable); - if (err) - priv->channels.params.scatter_fcs_en = !enable; + if (enable) { + err = mlx5e_set_rx_port_ts(mdev, false); + if (err) + goto out; - mutex_unlock(&priv->state_lock); + chs->params.scatter_fcs_en = true; + err = mlx5e_modify_channels_scatter_fcs(chs, true); + if (err) { + chs->params.scatter_fcs_en = false; + mlx5e_set_rx_port_ts(mdev, true); + } + } else { + chs->params.scatter_fcs_en = false; + err = mlx5e_modify_channels_scatter_fcs(chs, false); + if (err) { + chs->params.scatter_fcs_en = true; + goto out; + } + err = mlx5e_set_rx_port_ts(mdev, true); + if (err) { + mlx5_core_warn(mdev, "Failed to set RX port timestamp %d\n", err); + err = 0; + } + } +out: + mutex_unlock(&priv->state_lock); return err; } diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index f3638d09ba77..993204a6c1a1 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -9475,16 +9475,22 @@ struct mlx5_ifc_pcmr_reg_bits { u8 reserved_at_0[0x8]; u8 local_port[0x8]; u8 reserved_at_10[0x10]; + u8 entropy_force_cap[0x1]; u8 entropy_calc_cap[0x1]; u8 entropy_gre_calc_cap[0x1]; - u8 reserved_at_23[0x1b]; + u8 reserved_at_23[0xf]; + u8 rx_ts_over_crc_cap[0x1]; + u8 reserved_at_33[0xb]; u8 fcs_cap[0x1]; u8 reserved_at_3f[0x1]; + u8 entropy_force[0x1]; u8 entropy_calc[0x1]; u8 entropy_gre_calc[0x1]; - u8 reserved_at_43[0x1b]; + u8 reserved_at_43[0xf]; + u8 rx_ts_over_crc[0x1]; + u8 reserved_at_53[0xb]; u8 fcs_chk[0x1]; u8 reserved_at_5f[0x1]; }; -- cgit v1.2.3 From 84c8a87402cf073ba7948dd62d4815a3f4a224c8 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Mon, 11 Oct 2021 18:39:35 +0300 Subject: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 0439203fc7d9..0684ac6699b2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -618,6 +618,11 @@ static void mlx5e_build_rep_params(struct net_device *netdev) params->mqprio.num_tc = 1; params->tunneled_offload_en = false; + /* Set an initial non-zero value, so that mlx5e_select_queue won't + * divide by zero if called before first activating channels. + */ + priv->num_tc_x_num_ch = params->num_channels * params->mqprio.num_tc; + mlx5_query_min_inline(mdev, ¶ms->tx_min_inline_mode); } -- cgit v1.2.3 From 0dee6f70fd40e3375d45d3f93abdf6a57fc0e549 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 22 Aug 2021 02:44:27 +0300 Subject: drm: rcar-du: Don't create encoder for unconnected LVDS outputs On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU, even when LVDS outputs are not used. For this reason, the rcar-lvds driver probes successfully on those platforms even if no further bridge or panel is connected to the LVDS output, in order to provide the rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU driver. If an LVDS output isn't connected, trying to create a DRM connector for the output will fail. Fix this by skipping connector creation in that case, and also skip creation of the DRM encoder as there's no point in an encoder without a connector. Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper") Reported-by: Geert Uytterhoeven Signed-off-by: Laurent Pinchart Tested-by: Geert Uytterhoeven (cherry picked from commit 187502afe87a0fc96832056558978fa423920ee0) Signed-off-by: Dave Airlie --- drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 16 ++++++++++++---- drivers/gpu/drm/rcar-du/rcar_lvds.c | 11 +++++++++++ drivers/gpu/drm/rcar-du/rcar_lvds.h | 5 +++++ 3 files changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c index 0daa8bba50f5..4bf4e25d7f01 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c @@ -86,12 +86,20 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu, } /* - * Create and initialize the encoder. On Gen3 skip the LVDS1 output if + * Create and initialize the encoder. On Gen3, skip the LVDS1 output if * the LVDS1 encoder is used as a companion for LVDS0 in dual-link - * mode. + * mode, or any LVDS output if it isn't connected. The latter may happen + * on D3 or E3 as the LVDS encoders are needed to provide the pixel + * clock to the DU, even when the LVDS outputs are not used. */ - if (rcdu->info->gen >= 3 && output == RCAR_DU_OUTPUT_LVDS1) { - if (rcar_lvds_dual_link(bridge)) + if (rcdu->info->gen >= 3) { + if (output == RCAR_DU_OUTPUT_LVDS1 && + rcar_lvds_dual_link(bridge)) + return -ENOLINK; + + if ((output == RCAR_DU_OUTPUT_LVDS0 || + output == RCAR_DU_OUTPUT_LVDS1) && + !rcar_lvds_is_connected(bridge)) return -ENOLINK; } diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c index d061b8de748f..b672c5bd72ee 100644 --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c @@ -576,6 +576,9 @@ static int rcar_lvds_attach(struct drm_bridge *bridge, { struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); + if (!lvds->next_bridge) + return 0; + return drm_bridge_attach(bridge->encoder, lvds->next_bridge, bridge, flags); } @@ -598,6 +601,14 @@ bool rcar_lvds_dual_link(struct drm_bridge *bridge) } EXPORT_SYMBOL_GPL(rcar_lvds_dual_link); +bool rcar_lvds_is_connected(struct drm_bridge *bridge) +{ + struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); + + return lvds->next_bridge != NULL; +} +EXPORT_SYMBOL_GPL(rcar_lvds_is_connected); + /* ----------------------------------------------------------------------------- * Probe & Remove */ diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.h b/drivers/gpu/drm/rcar-du/rcar_lvds.h index 222ec0e60785..eb7c6ef03b00 100644 --- a/drivers/gpu/drm/rcar-du/rcar_lvds.h +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.h @@ -16,6 +16,7 @@ struct drm_bridge; int rcar_lvds_clk_enable(struct drm_bridge *bridge, unsigned long freq); void rcar_lvds_clk_disable(struct drm_bridge *bridge); bool rcar_lvds_dual_link(struct drm_bridge *bridge); +bool rcar_lvds_is_connected(struct drm_bridge *bridge); #else static inline int rcar_lvds_clk_enable(struct drm_bridge *bridge, unsigned long freq) @@ -27,6 +28,10 @@ static inline bool rcar_lvds_dual_link(struct drm_bridge *bridge) { return false; } +static inline bool rcar_lvds_is_connected(struct drm_bridge *bridge) +{ + return false; +} #endif /* CONFIG_DRM_RCAR_LVDS */ #endif /* __RCAR_LVDS_H__ */ -- cgit v1.2.3 From 60d950f443a52d950126ad664fbd4a1eb8353dc9 Mon Sep 17 00:00:00 2001 From: Baowen Zheng Date: Tue, 12 Oct 2021 14:48:50 +0200 Subject: nfp: flow_offload: move flow_indr_dev_register from app init to app start In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Baowen Zheng Signed-off-by: Simon Horman Signed-off-by: Louis Peens Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/netronome/nfp/flower/main.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.c b/drivers/net/ethernet/netronome/nfp/flower/main.c index c029950a81e2..ac1dcfa1d179 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.c +++ b/drivers/net/ethernet/netronome/nfp/flower/main.c @@ -830,10 +830,6 @@ static int nfp_flower_init(struct nfp_app *app) if (err) goto err_cleanup; - err = flow_indr_dev_register(nfp_flower_indr_setup_tc_cb, app); - if (err) - goto err_cleanup; - if (app_priv->flower_ext_feats & NFP_FL_FEATS_VF_RLIM) nfp_flower_qos_init(app); @@ -942,7 +938,20 @@ static int nfp_flower_start(struct nfp_app *app) return err; } - return nfp_tunnel_config_start(app); + err = flow_indr_dev_register(nfp_flower_indr_setup_tc_cb, app); + if (err) + return err; + + err = nfp_tunnel_config_start(app); + if (err) + goto err_tunnel_config; + + return 0; + +err_tunnel_config: + flow_indr_dev_unregister(nfp_flower_indr_setup_tc_cb, app, + nfp_flower_setup_indr_tc_release); + return err; } static void nfp_flower_stop(struct nfp_app *app) -- cgit v1.2.3 From 43a4b4dbd48c9006ef64df3a12acf33bdfe11c61 Mon Sep 17 00:00:00 2001 From: Alvin Šipraga Date: Tue, 12 Oct 2021 13:27:31 +0200 Subject: net: dsa: fix spurious error message when unoffloaded port leaves bridge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Flip the sign of a return value check, thereby suppressing the following spurious error: port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP ... which is emitted when removing an unoffloaded DSA switch port from a bridge. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Alvin Šipraga Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20211012112730.3429157-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski --- net/dsa/switch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dsa/switch.c b/net/dsa/switch.c index 1c797ec8e2c2..6466d0539af9 100644 --- a/net/dsa/switch.c +++ b/net/dsa/switch.c @@ -168,7 +168,7 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds, if (extack._msg) dev_err(ds->dev, "port %d: %s\n", info->port, extack._msg); - if (err && err != EOPNOTSUPP) + if (err && err != -EOPNOTSUPP) return err; } -- cgit v1.2.3 From 28da0555c3b542d605e4ca26eea6a740cf2c9174 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 22 Sep 2021 17:37:25 +0300 Subject: net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driver The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/sja1105/sja1105_ptp.c | 45 +++++------------------------------ drivers/net/dsa/sja1105/sja1105_ptp.h | 19 --------------- include/linux/dsa/sja1105.h | 29 +++++++++++----------- net/dsa/tag_sja1105.c | 43 +++++++++++++++++++++++++++++++++ 4 files changed, 63 insertions(+), 73 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index 691f6dd7e669..54396992a919 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -64,6 +64,7 @@ enum sja1105_ptp_clk_mode { static int sja1105_change_rxtstamping(struct sja1105_private *priv, bool on) { + struct sja1105_tagger_data *tagger_data = &priv->tagger_data; struct sja1105_ptp_data *ptp_data = &priv->ptp_data; struct sja1105_general_params_entry *general_params; struct sja1105_table *table; @@ -79,7 +80,7 @@ static int sja1105_change_rxtstamping(struct sja1105_private *priv, priv->tagger_data.stampable_skb = NULL; } ptp_cancel_worker_sync(ptp_data->clock); - skb_queue_purge(&ptp_data->skb_txtstamp_queue); + skb_queue_purge(&tagger_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); return sja1105_static_config_reload(priv, SJA1105_RX_HWTSTAMPING); @@ -452,40 +453,6 @@ bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, return priv->info->rxtstamp(ds, port, skb); } -void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, u8 ts_id, - enum sja1110_meta_tstamp dir, u64 tstamp) -{ - struct sja1105_private *priv = ds->priv; - struct sja1105_ptp_data *ptp_data = &priv->ptp_data; - struct sk_buff *skb, *skb_tmp, *skb_match = NULL; - struct skb_shared_hwtstamps shwt = {0}; - - /* We don't care about RX timestamps on the CPU port */ - if (dir == SJA1110_META_TSTAMP_RX) - return; - - spin_lock(&ptp_data->skb_txtstamp_queue.lock); - - skb_queue_walk_safe(&ptp_data->skb_txtstamp_queue, skb, skb_tmp) { - if (SJA1105_SKB_CB(skb)->ts_id != ts_id) - continue; - - __skb_unlink(skb, &ptp_data->skb_txtstamp_queue); - skb_match = skb; - - break; - } - - spin_unlock(&ptp_data->skb_txtstamp_queue.lock); - - if (WARN_ON(!skb_match)) - return; - - shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(tstamp)); - skb_complete_tx_timestamp(skb_match, &shwt); -} -EXPORT_SYMBOL_GPL(sja1110_process_meta_tstamp); - /* In addition to cloning the skb which is done by the common * sja1105_port_txtstamp, we need to generate a timestamp ID and save the * packet to the TX timestamping queue. @@ -494,7 +461,6 @@ void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) { struct sk_buff *clone = SJA1105_SKB_CB(skb)->clone; struct sja1105_private *priv = ds->priv; - struct sja1105_ptp_data *ptp_data = &priv->ptp_data; struct sja1105_port *sp = &priv->ports[port]; u8 ts_id; @@ -510,7 +476,7 @@ void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) spin_unlock(&sp->data->meta_lock); - skb_queue_tail(&ptp_data->skb_txtstamp_queue, clone); + skb_queue_tail(&sp->data->skb_txtstamp_queue, clone); } /* Called from dsa_skb_tx_timestamp. This callback is just to clone @@ -953,7 +919,7 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) /* Only used on SJA1105 */ skb_queue_head_init(&ptp_data->skb_rxtstamp_queue); /* Only used on SJA1110 */ - skb_queue_head_init(&ptp_data->skb_txtstamp_queue); + skb_queue_head_init(&tagger_data->skb_txtstamp_queue); spin_lock_init(&tagger_data->meta_lock); ptp_data->clock = ptp_clock_register(&ptp_data->caps, ds->dev); @@ -971,6 +937,7 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) void sja1105_ptp_clock_unregister(struct dsa_switch *ds) { struct sja1105_private *priv = ds->priv; + struct sja1105_tagger_data *tagger_data = &priv->tagger_data; struct sja1105_ptp_data *ptp_data = &priv->ptp_data; if (IS_ERR_OR_NULL(ptp_data->clock)) @@ -978,7 +945,7 @@ void sja1105_ptp_clock_unregister(struct dsa_switch *ds) del_timer_sync(&ptp_data->extts_timer); ptp_cancel_worker_sync(ptp_data->clock); - skb_queue_purge(&ptp_data->skb_txtstamp_queue); + skb_queue_purge(&tagger_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); ptp_clock_unregister(ptp_data->clock); ptp_data->clock = NULL; diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index 3c874bb4c17b..3ae6b9fdd492 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -8,21 +8,6 @@ #if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) -/* Timestamps are in units of 8 ns clock ticks (equivalent to - * a fixed 125 MHz clock). - */ -#define SJA1105_TICK_NS 8 - -static inline s64 ns_to_sja1105_ticks(s64 ns) -{ - return ns / SJA1105_TICK_NS; -} - -static inline s64 sja1105_ticks_to_ns(s64 ticks) -{ - return ticks * SJA1105_TICK_NS; -} - /* Calculate the first base_time in the future that satisfies this * relationship: * @@ -77,10 +62,6 @@ struct sja1105_ptp_data { struct timer_list extts_timer; /* Used only on SJA1105 to reconstruct partial timestamps */ struct sk_buff_head skb_rxtstamp_queue; - /* Used on SJA1110 where meta frames are generated only for - * 2-step TX timestamps - */ - struct sk_buff_head skb_txtstamp_queue; struct ptp_clock_info caps; struct ptp_clock *clock; struct sja1105_ptp_cmd cmd; diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h index 171106202fe5..0485ab2fcc46 100644 --- a/include/linux/dsa/sja1105.h +++ b/include/linux/dsa/sja1105.h @@ -48,6 +48,10 @@ struct sja1105_tagger_data { spinlock_t meta_lock; unsigned long state; u8 ts_id; + /* Used on SJA1110 where meta frames are generated only for + * 2-step TX timestamps + */ + struct sk_buff_head skb_txtstamp_queue; }; struct sja1105_skb_cb { @@ -69,25 +73,20 @@ struct sja1105_port { bool hwts_tx_en; }; -enum sja1110_meta_tstamp { - SJA1110_META_TSTAMP_TX = 0, - SJA1110_META_TSTAMP_RX = 1, -}; - -#if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) - -void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, u8 ts_id, - enum sja1110_meta_tstamp dir, u64 tstamp); - -#else +/* Timestamps are in units of 8 ns clock ticks (equivalent to + * a fixed 125 MHz clock). + */ +#define SJA1105_TICK_NS 8 -static inline void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, - u8 ts_id, enum sja1110_meta_tstamp dir, - u64 tstamp) +static inline s64 ns_to_sja1105_ticks(s64 ns) { + return ns / SJA1105_TICK_NS; } -#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) */ +static inline s64 sja1105_ticks_to_ns(s64 ticks) +{ + return ticks * SJA1105_TICK_NS; +} #if IS_ENABLED(CONFIG_NET_DSA_SJA1105) diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c index c054f48541c8..2edede9ddac9 100644 --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include "dsa_priv.h" @@ -53,6 +54,11 @@ #define SJA1110_TX_TRAILER_LEN 4 #define SJA1110_MAX_PADDING_LEN 15 +enum sja1110_meta_tstamp { + SJA1110_META_TSTAMP_TX = 0, + SJA1110_META_TSTAMP_RX = 1, +}; + /* Similar to is_link_local_ether_addr(hdr->h_dest) but also covers PTP */ static inline bool sja1105_is_link_local(const struct sk_buff *skb) { @@ -520,6 +526,43 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, is_meta); } +static void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, + u8 ts_id, enum sja1110_meta_tstamp dir, + u64 tstamp) +{ + struct sk_buff *skb, *skb_tmp, *skb_match = NULL; + struct dsa_port *dp = dsa_to_port(ds, port); + struct skb_shared_hwtstamps shwt = {0}; + struct sja1105_port *sp = dp->priv; + + if (!dsa_port_is_sja1105(dp)) + return; + + /* We don't care about RX timestamps on the CPU port */ + if (dir == SJA1110_META_TSTAMP_RX) + return; + + spin_lock(&sp->data->skb_txtstamp_queue.lock); + + skb_queue_walk_safe(&sp->data->skb_txtstamp_queue, skb, skb_tmp) { + if (SJA1105_SKB_CB(skb)->ts_id != ts_id) + continue; + + __skb_unlink(skb, &sp->data->skb_txtstamp_queue); + skb_match = skb; + + break; + } + + spin_unlock(&sp->data->skb_txtstamp_queue.lock); + + if (WARN_ON(!skb_match)) + return; + + shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(tstamp)); + skb_complete_tx_timestamp(skb_match, &shwt); +} + static struct sk_buff *sja1110_rcv_meta(struct sk_buff *skb, u16 rx_header) { u8 *buf = dsa_etype_header_pos_rx(skb) + SJA1110_HEADER_LEN; -- cgit v1.2.3 From 4ac0567e40b334b54988e3c28a2425ff9c8bdd35 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 22 Sep 2021 17:37:26 +0300 Subject: net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driver It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/sja1105/sja1105_main.c | 3 +-- include/linux/dsa/sja1105.h | 15 +-------------- net/dsa/Kconfig | 1 - 3 files changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 7c0db80eff00..924c3f129992 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -3117,7 +3117,7 @@ static void sja1105_teardown(struct dsa_switch *ds) sja1105_static_config_free(&priv->static_config); } -const struct dsa_switch_ops sja1105_switch_ops = { +static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .teardown = sja1105_teardown, @@ -3166,7 +3166,6 @@ const struct dsa_switch_ops sja1105_switch_ops = { .port_bridge_tx_fwd_offload = dsa_tag_8021q_bridge_tx_fwd_offload, .port_bridge_tx_fwd_unoffload = dsa_tag_8021q_bridge_tx_fwd_unoffload, }; -EXPORT_SYMBOL_GPL(sja1105_switch_ops); static const struct of_device_id sja1105_dt_ids[]; diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h index 0485ab2fcc46..9e07079528a5 100644 --- a/include/linux/dsa/sja1105.h +++ b/include/linux/dsa/sja1105.h @@ -88,22 +88,9 @@ static inline s64 sja1105_ticks_to_ns(s64 ticks) return ticks * SJA1105_TICK_NS; } -#if IS_ENABLED(CONFIG_NET_DSA_SJA1105) - -extern const struct dsa_switch_ops sja1105_switch_ops; - -static inline bool dsa_port_is_sja1105(struct dsa_port *dp) -{ - return dp->ds->ops == &sja1105_switch_ops; -} - -#else - static inline bool dsa_port_is_sja1105(struct dsa_port *dp) { - return false; + return true; } -#endif - #endif /* _NET_DSA_SJA1105_H */ diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 548285539752..bca1b5d66df2 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -138,7 +138,6 @@ config NET_DSA_TAG_LAN9303 config NET_DSA_TAG_SJA1105 tristate "Tag driver for NXP SJA1105 switches" - depends on NET_DSA_SJA1105 || !NET_DSA_SJA1105 select PACKING help Say Y or M if you want to enable support for tagging frames with the -- cgit v1.2.3 From c57fe0037a4e3863d9b740f8c14df9c51ac31aa1 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:35 +0300 Subject: net: mscc: ocelot: make use of all 63 PTP timestamp identifiers At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 4 +++- include/soc/mscc/ocelot_ptp.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 4de58321907c..c43c8f53faaf 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -579,7 +579,9 @@ static void ocelot_port_add_txtstamp_skb(struct ocelot *ocelot, int port, skb_shinfo(clone)->tx_flags |= SKBTX_IN_PROGRESS; /* Store timestamp ID in OCELOT_SKB_CB(clone)->ts_id */ OCELOT_SKB_CB(clone)->ts_id = ocelot_port->ts_id; - ocelot_port->ts_id = (ocelot_port->ts_id + 1) % 4; + ocelot_port->ts_id++; + if (ocelot_port->ts_id == OCELOT_MAX_PTP_ID) + ocelot_port->ts_id = 0; skb_queue_tail(&ocelot_port->tx_skbs, clone); spin_unlock(&ocelot_port->ts_id_lock); diff --git a/include/soc/mscc/ocelot_ptp.h b/include/soc/mscc/ocelot_ptp.h index ded497d72bdb..6e54442b49ad 100644 --- a/include/soc/mscc/ocelot_ptp.h +++ b/include/soc/mscc/ocelot_ptp.h @@ -13,6 +13,8 @@ #include #include +#define OCELOT_MAX_PTP_ID 63 + #define PTP_PIN_CFG_RSZ 0x20 #define PTP_PIN_TOD_SEC_MSB_RSZ PTP_PIN_CFG_RSZ #define PTP_PIN_TOD_SEC_LSB_RSZ PTP_PIN_CFG_RSZ -- cgit v1.2.3 From 52849bcf0029ccc553be304e4f804938a39112e2 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:36 +0300 Subject: net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/ocelot/felix.c | 6 +++++- drivers/net/ethernet/mscc/ocelot.c | 37 ++++++++++++++++++++++++++++++------- include/soc/mscc/ocelot.h | 5 ++++- include/soc/mscc/ocelot_ptp.h | 1 + 4 files changed, 40 insertions(+), 9 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index a3a9636430d6..50ef20724958 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1291,8 +1291,12 @@ static void felix_txtstamp(struct dsa_switch *ds, int port, if (!ocelot->ptp) return; - if (ocelot_port_txtstamp_request(ocelot, port, skb, &clone)) + if (ocelot_port_txtstamp_request(ocelot, port, skb, &clone)) { + dev_err_ratelimited(ds->dev, + "port %d delivering skb without TX timestamp\n", + port); return; + } if (clone) OCELOT_SKB_CB(skb)->clone = clone; diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index c43c8f53faaf..9c62f1d13adc 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -569,22 +569,36 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port, } EXPORT_SYMBOL_GPL(ocelot_phylink_mac_link_up); -static void ocelot_port_add_txtstamp_skb(struct ocelot *ocelot, int port, - struct sk_buff *clone) +static int ocelot_port_add_txtstamp_skb(struct ocelot *ocelot, int port, + struct sk_buff *clone) { struct ocelot_port *ocelot_port = ocelot->ports[port]; + unsigned long flags; + + spin_lock_irqsave(&ocelot->ts_id_lock, flags); - spin_lock(&ocelot_port->ts_id_lock); + if (ocelot_port->ptp_skbs_in_flight == OCELOT_MAX_PTP_ID || + ocelot->ptp_skbs_in_flight == OCELOT_PTP_FIFO_SIZE) { + spin_unlock_irqrestore(&ocelot->ts_id_lock, flags); + return -EBUSY; + } skb_shinfo(clone)->tx_flags |= SKBTX_IN_PROGRESS; /* Store timestamp ID in OCELOT_SKB_CB(clone)->ts_id */ OCELOT_SKB_CB(clone)->ts_id = ocelot_port->ts_id; + ocelot_port->ts_id++; if (ocelot_port->ts_id == OCELOT_MAX_PTP_ID) ocelot_port->ts_id = 0; + + ocelot_port->ptp_skbs_in_flight++; + ocelot->ptp_skbs_in_flight++; + skb_queue_tail(&ocelot_port->tx_skbs, clone); - spin_unlock(&ocelot_port->ts_id_lock); + spin_unlock_irqrestore(&ocelot->ts_id_lock, flags); + + return 0; } u32 ocelot_ptp_rew_op(struct sk_buff *skb) @@ -633,6 +647,7 @@ int ocelot_port_txtstamp_request(struct ocelot *ocelot, int port, { struct ocelot_port *ocelot_port = ocelot->ports[port]; u8 ptp_cmd = ocelot_port->ptp_cmd; + int err; /* Store ptp_cmd in OCELOT_SKB_CB(skb)->ptp_cmd */ if (ptp_cmd == IFH_REW_OP_ORIGIN_PTP) { @@ -650,7 +665,10 @@ int ocelot_port_txtstamp_request(struct ocelot *ocelot, int port, if (!(*clone)) return -ENOMEM; - ocelot_port_add_txtstamp_skb(ocelot, port, *clone); + err = ocelot_port_add_txtstamp_skb(ocelot, port, *clone); + if (err) + return err; + OCELOT_SKB_CB(skb)->ptp_cmd = ptp_cmd; } @@ -709,9 +727,14 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) id = SYS_PTP_STATUS_PTP_MESS_ID_X(val); txport = SYS_PTP_STATUS_PTP_MESS_TXPORT_X(val); - /* Retrieve its associated skb */ port = ocelot->ports[txport]; + spin_lock(&ocelot->ts_id_lock); + port->ptp_skbs_in_flight--; + ocelot->ptp_skbs_in_flight--; + spin_unlock(&ocelot->ts_id_lock); + + /* Retrieve its associated skb */ spin_lock_irqsave(&port->tx_skbs.lock, flags); skb_queue_walk_safe(&port->tx_skbs, skb, skb_tmp) { @@ -1950,7 +1973,6 @@ void ocelot_init_port(struct ocelot *ocelot, int port) struct ocelot_port *ocelot_port = ocelot->ports[port]; skb_queue_head_init(&ocelot_port->tx_skbs); - spin_lock_init(&ocelot_port->ts_id_lock); /* Basic L2 initialization */ @@ -2083,6 +2105,7 @@ int ocelot_init(struct ocelot *ocelot) mutex_init(&ocelot->stats_lock); mutex_init(&ocelot->ptp_lock); spin_lock_init(&ocelot->ptp_clock_lock); + spin_lock_init(&ocelot->ts_id_lock); snprintf(queue_name, sizeof(queue_name), "%s-stats", dev_name(ocelot->dev)); ocelot->stats_queue = create_singlethread_workqueue(queue_name); diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h index 06706a9fd5b1..b0ece85d9a76 100644 --- a/include/soc/mscc/ocelot.h +++ b/include/soc/mscc/ocelot.h @@ -603,10 +603,10 @@ struct ocelot_port { /* The VLAN ID that will be transmitted as untagged, on egress */ struct ocelot_vlan native_vlan; + unsigned int ptp_skbs_in_flight; u8 ptp_cmd; struct sk_buff_head tx_skbs; u8 ts_id; - spinlock_t ts_id_lock; phy_interface_t phy_mode; @@ -680,6 +680,9 @@ struct ocelot { struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_info; struct hwtstamp_config hwtstamp_config; + unsigned int ptp_skbs_in_flight; + /* Protects the 2-step TX timestamp ID logic */ + spinlock_t ts_id_lock; /* Protects the PTP interface state */ struct mutex ptp_lock; /* Protects the PTP clock */ diff --git a/include/soc/mscc/ocelot_ptp.h b/include/soc/mscc/ocelot_ptp.h index 6e54442b49ad..f085884b1fa2 100644 --- a/include/soc/mscc/ocelot_ptp.h +++ b/include/soc/mscc/ocelot_ptp.h @@ -14,6 +14,7 @@ #include #define OCELOT_MAX_PTP_ID 63 +#define OCELOT_PTP_FIFO_SIZE 128 #define PTP_PIN_CFG_RSZ 0x20 #define PTP_PIN_TOD_SEC_MSB_RSZ PTP_PIN_CFG_RSZ -- cgit v1.2.3 From 9fde506e0c53b8309f69b18b4b8144c544b4b3b1 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:37 +0300 Subject: net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 9c62f1d13adc..687c07c338cd 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -747,12 +747,12 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) spin_unlock_irqrestore(&port->tx_skbs.lock, flags); + if (WARN_ON(!skb_match)) + continue; + /* Get the h/w timestamp */ ocelot_get_hwtimestamp(ocelot, &ts); - if (unlikely(!skb_match)) - continue; - /* Set the timestamp into the skb */ memset(&shhwtstamps, 0, sizeof(shhwtstamps)); shhwtstamps.hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec); -- cgit v1.2.3 From fba01283d85a09e0e2ef552c6e764b903111d90a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:38 +0300 Subject: net: mscc: ocelot: deny TX timestamping of non-PTP packets It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 687c07c338cd..3b1f0bb6a414 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -618,16 +618,12 @@ u32 ocelot_ptp_rew_op(struct sk_buff *skb) } EXPORT_SYMBOL(ocelot_ptp_rew_op); -static bool ocelot_ptp_is_onestep_sync(struct sk_buff *skb) +static bool ocelot_ptp_is_onestep_sync(struct sk_buff *skb, + unsigned int ptp_class) { struct ptp_header *hdr; - unsigned int ptp_class; u8 msgtype, twostep; - ptp_class = ptp_classify_raw(skb); - if (ptp_class == PTP_CLASS_NONE) - return false; - hdr = ptp_parse_header(skb, ptp_class); if (!hdr) return false; @@ -647,11 +643,20 @@ int ocelot_port_txtstamp_request(struct ocelot *ocelot, int port, { struct ocelot_port *ocelot_port = ocelot->ports[port]; u8 ptp_cmd = ocelot_port->ptp_cmd; + unsigned int ptp_class; int err; + /* Don't do anything if PTP timestamping not enabled */ + if (!ptp_cmd) + return 0; + + ptp_class = ptp_classify_raw(skb); + if (ptp_class == PTP_CLASS_NONE) + return -EINVAL; + /* Store ptp_cmd in OCELOT_SKB_CB(skb)->ptp_cmd */ if (ptp_cmd == IFH_REW_OP_ORIGIN_PTP) { - if (ocelot_ptp_is_onestep_sync(skb)) { + if (ocelot_ptp_is_onestep_sync(skb, ptp_class)) { OCELOT_SKB_CB(skb)->ptp_cmd = ptp_cmd; return 0; } -- cgit v1.2.3 From ebb4c6a990f786d7e0e4618a0d3766cd660125d8 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:39 +0300 Subject: net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 24 +++++++++++++++++++++++- include/soc/mscc/ocelot.h | 1 + 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 3b1f0bb6a414..f0044329e3d7 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -675,6 +675,7 @@ int ocelot_port_txtstamp_request(struct ocelot *ocelot, int port, return err; OCELOT_SKB_CB(skb)->ptp_cmd = ptp_cmd; + OCELOT_SKB_CB(*clone)->ptp_class = ptp_class; } return 0; @@ -708,6 +709,17 @@ static void ocelot_get_hwtimestamp(struct ocelot *ocelot, spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags); } +static bool ocelot_validate_ptp_skb(struct sk_buff *clone, u16 seqid) +{ + struct ptp_header *hdr; + + hdr = ptp_parse_header(clone, OCELOT_SKB_CB(clone)->ptp_class); + if (WARN_ON(!hdr)) + return false; + + return seqid == ntohs(hdr->sequence_id); +} + void ocelot_get_txtstamp(struct ocelot *ocelot) { int budget = OCELOT_PTP_QUEUE_SZ; @@ -715,10 +727,10 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) while (budget--) { struct sk_buff *skb, *skb_tmp, *skb_match = NULL; struct skb_shared_hwtstamps shhwtstamps; + u32 val, id, seqid, txport; struct ocelot_port *port; struct timespec64 ts; unsigned long flags; - u32 val, id, txport; val = ocelot_read(ocelot, SYS_PTP_STATUS); @@ -731,6 +743,7 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) /* Retrieve the ts ID and Tx port */ id = SYS_PTP_STATUS_PTP_MESS_ID_X(val); txport = SYS_PTP_STATUS_PTP_MESS_TXPORT_X(val); + seqid = SYS_PTP_STATUS_PTP_MESS_SEQ_ID(val); port = ocelot->ports[txport]; @@ -740,6 +753,7 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) spin_unlock(&ocelot->ts_id_lock); /* Retrieve its associated skb */ +try_again: spin_lock_irqsave(&port->tx_skbs.lock, flags); skb_queue_walk_safe(&port->tx_skbs, skb, skb_tmp) { @@ -755,6 +769,14 @@ void ocelot_get_txtstamp(struct ocelot *ocelot) if (WARN_ON(!skb_match)) continue; + if (!ocelot_validate_ptp_skb(skb_match, seqid)) { + dev_err_ratelimited(ocelot->dev, + "port %d received stale TX timestamp for seqid %d, discarding\n", + txport, seqid); + dev_kfree_skb_any(skb); + goto try_again; + } + /* Get the h/w timestamp */ ocelot_get_hwtimestamp(ocelot, &ts); diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h index b0ece85d9a76..cabacef8731c 100644 --- a/include/soc/mscc/ocelot.h +++ b/include/soc/mscc/ocelot.h @@ -697,6 +697,7 @@ struct ocelot_policer { struct ocelot_skb_cb { struct sk_buff *clone; + unsigned int ptp_class; /* valid only for clones */ u8 ptp_cmd; u8 ts_id; }; -- cgit v1.2.3 From deab6b1cd9789bb9bd466d5e76aecb8b336259b4 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:40 +0300 Subject: net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 17 ---------------- drivers/net/ethernet/mscc/ocelot_net.c | 1 + include/linux/dsa/ocelot.h | 37 ++++++++++++++++++++++++++++++++++ include/soc/mscc/ocelot.h | 24 ---------------------- net/dsa/Kconfig | 2 -- net/dsa/tag_ocelot.c | 1 - net/dsa/tag_ocelot_8021q.c | 1 + 7 files changed, 39 insertions(+), 44 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index f0044329e3d7..a08e4f530c1c 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -601,23 +601,6 @@ static int ocelot_port_add_txtstamp_skb(struct ocelot *ocelot, int port, return 0; } -u32 ocelot_ptp_rew_op(struct sk_buff *skb) -{ - struct sk_buff *clone = OCELOT_SKB_CB(skb)->clone; - u8 ptp_cmd = OCELOT_SKB_CB(skb)->ptp_cmd; - u32 rew_op = 0; - - if (ptp_cmd == IFH_REW_OP_TWO_STEP_PTP && clone) { - rew_op = ptp_cmd; - rew_op |= OCELOT_SKB_CB(clone)->ts_id << 3; - } else if (ptp_cmd == IFH_REW_OP_ORIGIN_PTP) { - rew_op = ptp_cmd; - } - - return rew_op; -} -EXPORT_SYMBOL(ocelot_ptp_rew_op); - static bool ocelot_ptp_is_onestep_sync(struct sk_buff *skb, unsigned int ptp_class) { diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c index 2a85bcb5d0c2..2545727fd5b2 100644 --- a/drivers/net/ethernet/mscc/ocelot_net.c +++ b/drivers/net/ethernet/mscc/ocelot_net.c @@ -8,6 +8,7 @@ * Copyright 2020-2021 NXP */ +#include #include #include #include diff --git a/include/linux/dsa/ocelot.h b/include/linux/dsa/ocelot.h index 435777a0073c..50641a7529ad 100644 --- a/include/linux/dsa/ocelot.h +++ b/include/linux/dsa/ocelot.h @@ -6,6 +6,26 @@ #define _NET_DSA_TAG_OCELOT_H #include +#include + +struct ocelot_skb_cb { + struct sk_buff *clone; + unsigned int ptp_class; /* valid only for clones */ + u8 ptp_cmd; + u8 ts_id; +}; + +#define OCELOT_SKB_CB(skb) \ + ((struct ocelot_skb_cb *)((skb)->cb)) + +#define IFH_TAG_TYPE_C 0 +#define IFH_TAG_TYPE_S 1 + +#define IFH_REW_OP_NOOP 0x0 +#define IFH_REW_OP_DSCP 0x1 +#define IFH_REW_OP_ONE_STEP_PTP 0x2 +#define IFH_REW_OP_TWO_STEP_PTP 0x3 +#define IFH_REW_OP_ORIGIN_PTP 0x5 #define OCELOT_TAG_LEN 16 #define OCELOT_SHORT_PREFIX_LEN 4 @@ -215,4 +235,21 @@ static inline void ocelot_ifh_set_vid(void *injection, u64 vid) packing(injection, &vid, 11, 0, OCELOT_TAG_LEN, PACK, 0); } +/* Determine the PTP REW_OP to use for injecting the given skb */ +static inline u32 ocelot_ptp_rew_op(struct sk_buff *skb) +{ + struct sk_buff *clone = OCELOT_SKB_CB(skb)->clone; + u8 ptp_cmd = OCELOT_SKB_CB(skb)->ptp_cmd; + u32 rew_op = 0; + + if (ptp_cmd == IFH_REW_OP_TWO_STEP_PTP && clone) { + rew_op = ptp_cmd; + rew_op |= OCELOT_SKB_CB(clone)->ts_id << 3; + } else if (ptp_cmd == IFH_REW_OP_ORIGIN_PTP) { + rew_op = ptp_cmd; + } + + return rew_op; +} + #endif diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h index cabacef8731c..66b2e65c1179 100644 --- a/include/soc/mscc/ocelot.h +++ b/include/soc/mscc/ocelot.h @@ -89,15 +89,6 @@ /* Source PGIDs, one per physical port */ #define PGID_SRC 80 -#define IFH_TAG_TYPE_C 0 -#define IFH_TAG_TYPE_S 1 - -#define IFH_REW_OP_NOOP 0x0 -#define IFH_REW_OP_DSCP 0x1 -#define IFH_REW_OP_ONE_STEP_PTP 0x2 -#define IFH_REW_OP_TWO_STEP_PTP 0x3 -#define IFH_REW_OP_ORIGIN_PTP 0x5 - #define OCELOT_NUM_TC 8 #define OCELOT_SPEED_2500 0 @@ -695,16 +686,6 @@ struct ocelot_policer { u32 burst; /* bytes */ }; -struct ocelot_skb_cb { - struct sk_buff *clone; - unsigned int ptp_class; /* valid only for clones */ - u8 ptp_cmd; - u8 ts_id; -}; - -#define OCELOT_SKB_CB(skb) \ - ((struct ocelot_skb_cb *)((skb)->cb)) - #define ocelot_read_ix(ocelot, reg, gi, ri) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi) + reg##_RSZ * (ri)) #define ocelot_read_gix(ocelot, reg, gi) __ocelot_read_ix(ocelot, reg, reg##_GSZ * (gi)) #define ocelot_read_rix(ocelot, reg, ri) __ocelot_read_ix(ocelot, reg, reg##_RSZ * (ri)) @@ -765,7 +746,6 @@ void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int grp, int ocelot_xtr_poll_frame(struct ocelot *ocelot, int grp, struct sk_buff **skb); void ocelot_drain_cpu_queue(struct ocelot *ocelot, int grp); -u32 ocelot_ptp_rew_op(struct sk_buff *skb); #else static inline bool ocelot_can_inject(struct ocelot *ocelot, int grp) @@ -789,10 +769,6 @@ static inline void ocelot_drain_cpu_queue(struct ocelot *ocelot, int grp) { } -static inline u32 ocelot_ptp_rew_op(struct sk_buff *skb) -{ - return 0; -} #endif /* Hardware initialization */ diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index bca1b5d66df2..d166377d7085 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -101,8 +101,6 @@ config NET_DSA_TAG_RTL4_A config NET_DSA_TAG_OCELOT tristate "Tag driver for Ocelot family of switches, using NPI port" - depends on MSCC_OCELOT_SWITCH_LIB || \ - (MSCC_OCELOT_SWITCH_LIB=n && COMPILE_TEST) select PACKING help Say Y or M if you want to enable NPI tagging for the Ocelot switches diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c index 8025ed778d33..605b51ca6921 100644 --- a/net/dsa/tag_ocelot.c +++ b/net/dsa/tag_ocelot.c @@ -2,7 +2,6 @@ /* Copyright 2019 NXP */ #include -#include #include "dsa_priv.h" static void ocelot_xmit_common(struct sk_buff *skb, struct net_device *netdev, diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index 59072930cb02..1e4e66ea6796 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -9,6 +9,7 @@ * that on egress */ #include +#include #include #include #include "dsa_priv.h" -- cgit v1.2.3 From 49f885b2d97093451410e7279aa29d81e094e108 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:41 +0300 Subject: net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/ocelot/felix.c | 96 ++++++++++++++++++++++++++++++++++++++++-- drivers/net/dsa/ocelot/felix.h | 1 + include/linux/dsa/ocelot.h | 12 ++++++ include/soc/mscc/ocelot.h | 27 ------------ net/dsa/Kconfig | 2 - net/dsa/tag_ocelot_8021q.c | 38 +++++++++++------ 6 files changed, 130 insertions(+), 46 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 50ef20724958..f8603e068e7c 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1074,6 +1074,73 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) return 0; } +#define work_to_xmit_work(w) \ + container_of((w), struct felix_deferred_xmit_work, work) + +static void felix_port_deferred_xmit(struct kthread_work *work) +{ + struct felix_deferred_xmit_work *xmit_work = work_to_xmit_work(work); + struct dsa_switch *ds = xmit_work->dp->ds; + struct sk_buff *skb = xmit_work->skb; + u32 rew_op = ocelot_ptp_rew_op(skb); + struct ocelot *ocelot = ds->priv; + int port = xmit_work->dp->index; + int retries = 10; + + do { + if (ocelot_can_inject(ocelot, 0)) + break; + + cpu_relax(); + } while (--retries); + + if (!retries) { + dev_err(ocelot->dev, "port %d failed to inject skb\n", + port); + kfree_skb(skb); + return; + } + + ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb); + + consume_skb(skb); + kfree(xmit_work); +} + +static int felix_port_setup_tagger_data(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + struct felix_port *felix_port; + + if (!dsa_port_is_user(dp)) + return 0; + + felix_port = kzalloc(sizeof(*felix_port), GFP_KERNEL); + if (!felix_port) + return -ENOMEM; + + felix_port->xmit_worker = felix->xmit_worker; + felix_port->xmit_work_fn = felix_port_deferred_xmit; + + dp->priv = felix_port; + + return 0; +} + +static void felix_port_teardown_tagger_data(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct felix_port *felix_port = dp->priv; + + if (!felix_port) + return; + + dp->priv = NULL; + kfree(felix_port); +} + /* Hardware initialization done here so that we can allocate structures with * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing * us to allocate structures twice (leak memory) and map PCI memory twice @@ -1102,6 +1169,12 @@ static int felix_setup(struct dsa_switch *ds) } } + felix->xmit_worker = kthread_create_worker(0, "felix_xmit"); + if (IS_ERR(felix->xmit_worker)) { + err = PTR_ERR(felix->xmit_worker); + goto out_deinit_timestamp; + } + for (port = 0; port < ds->num_ports; port++) { if (dsa_is_unused_port(ds, port)) continue; @@ -1112,6 +1185,14 @@ static int felix_setup(struct dsa_switch *ds) * bits of vlan tag. */ felix_port_qos_map_init(ocelot, port); + + err = felix_port_setup_tagger_data(ds, port); + if (err) { + dev_err(ds->dev, + "port %d failed to set up tagger data: %pe\n", + port, ERR_PTR(err)); + goto out_deinit_ports; + } } err = ocelot_devlink_sb_register(ocelot); @@ -1138,9 +1219,13 @@ out_deinit_ports: if (dsa_is_unused_port(ds, port)) continue; + felix_port_teardown_tagger_data(ds, port); ocelot_deinit_port(ocelot, port); } + kthread_destroy_worker(felix->xmit_worker); + +out_deinit_timestamp: ocelot_deinit_timestamp(ocelot); ocelot_deinit(ocelot); @@ -1164,17 +1249,20 @@ static void felix_teardown(struct dsa_switch *ds) felix_del_tag_protocol(ds, port, felix->tag_proto); } - ocelot_devlink_sb_unregister(ocelot); - ocelot_deinit_timestamp(ocelot); - ocelot_deinit(ocelot); - for (port = 0; port < ocelot->num_phys_ports; port++) { if (dsa_is_unused_port(ds, port)) continue; + felix_port_teardown_tagger_data(ds, port); ocelot_deinit_port(ocelot, port); } + kthread_destroy_worker(felix->xmit_worker); + + ocelot_devlink_sb_unregister(ocelot); + ocelot_deinit_timestamp(ocelot); + ocelot_deinit(ocelot); + if (felix->info->mdio_bus_free) felix->info->mdio_bus_free(ocelot); } diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h index 54024b6f9498..be3e42e135c0 100644 --- a/drivers/net/dsa/ocelot/felix.h +++ b/drivers/net/dsa/ocelot/felix.h @@ -62,6 +62,7 @@ struct felix { resource_size_t switch_base; resource_size_t imdio_base; enum dsa_tag_protocol tag_proto; + struct kthread_worker *xmit_worker; }; struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port); diff --git a/include/linux/dsa/ocelot.h b/include/linux/dsa/ocelot.h index 50641a7529ad..8ae999f587c4 100644 --- a/include/linux/dsa/ocelot.h +++ b/include/linux/dsa/ocelot.h @@ -5,6 +5,7 @@ #ifndef _NET_DSA_TAG_OCELOT_H #define _NET_DSA_TAG_OCELOT_H +#include #include #include @@ -160,6 +161,17 @@ struct ocelot_skb_cb { * +------+------+------+------+------+------+------+------+ */ +struct felix_deferred_xmit_work { + struct dsa_port *dp; + struct sk_buff *skb; + struct kthread_work work; +}; + +struct felix_port { + void (*xmit_work_fn)(struct kthread_work *work); + struct kthread_worker *xmit_worker; +}; + static inline void ocelot_xfh_get_rew_val(void *extraction, u64 *rew_val) { packing(extraction, rew_val, 116, 85, OCELOT_TAG_LEN, UNPACK, 0); diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h index 66b2e65c1179..d7055b41982d 100644 --- a/include/soc/mscc/ocelot.h +++ b/include/soc/mscc/ocelot.h @@ -737,8 +737,6 @@ u32 __ocelot_target_read_ix(struct ocelot *ocelot, enum ocelot_target target, void __ocelot_target_write_ix(struct ocelot *ocelot, enum ocelot_target target, u32 val, u32 reg, u32 offset); -#if IS_ENABLED(CONFIG_MSCC_OCELOT_SWITCH_LIB) - /* Packet I/O */ bool ocelot_can_inject(struct ocelot *ocelot, int grp); void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int grp, @@ -746,31 +744,6 @@ void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int grp, int ocelot_xtr_poll_frame(struct ocelot *ocelot, int grp, struct sk_buff **skb); void ocelot_drain_cpu_queue(struct ocelot *ocelot, int grp); -#else - -static inline bool ocelot_can_inject(struct ocelot *ocelot, int grp) -{ - return false; -} - -static inline void ocelot_port_inject_frame(struct ocelot *ocelot, int port, - int grp, u32 rew_op, - struct sk_buff *skb) -{ -} - -static inline int ocelot_xtr_poll_frame(struct ocelot *ocelot, int grp, - struct sk_buff **skb) -{ - return -EIO; -} - -static inline void ocelot_drain_cpu_queue(struct ocelot *ocelot, int grp) -{ -} - -#endif - /* Hardware initialization */ int ocelot_regfields_init(struct ocelot *ocelot, const struct reg_field *const regfields); diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index d166377d7085..d8ee15f1c7a9 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -112,8 +112,6 @@ config NET_DSA_TAG_OCELOT config NET_DSA_TAG_OCELOT_8021Q tristate "Tag driver for Ocelot family of switches, using VLAN" - depends on MSCC_OCELOT_SWITCH_LIB || \ - (MSCC_OCELOT_SWITCH_LIB=n && COMPILE_TEST) help Say Y or M if you want to enable support for tagging frames with a custom VLAN-based header. Frames that require timestamping, such as diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index 1e4e66ea6796..d05c352f96e5 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -10,10 +10,31 @@ */ #include #include -#include -#include #include "dsa_priv.h" +static struct sk_buff *ocelot_defer_xmit(struct dsa_port *dp, + struct sk_buff *skb) +{ + struct felix_deferred_xmit_work *xmit_work; + struct felix_port *felix_port = dp->priv; + + xmit_work = kzalloc(sizeof(*xmit_work), GFP_ATOMIC); + if (!xmit_work) + return NULL; + + /* Calls felix_port_deferred_xmit in felix.c */ + kthread_init_work(&xmit_work->work, felix_port->xmit_work_fn); + /* Increase refcount so the kfree_skb in dsa_slave_xmit + * won't really free the packet. + */ + xmit_work->dp = dp; + xmit_work->skb = skb_get(skb); + + kthread_queue_work(felix_port->xmit_worker, &xmit_work->work); + + return NULL; +} + static struct sk_buff *ocelot_xmit(struct sk_buff *skb, struct net_device *netdev) { @@ -21,18 +42,9 @@ static struct sk_buff *ocelot_xmit(struct sk_buff *skb, u16 tx_vid = dsa_8021q_tx_vid(dp->ds, dp->index); u16 queue_mapping = skb_get_queue_mapping(skb); u8 pcp = netdev_txq_to_tc(netdev, queue_mapping); - struct ocelot *ocelot = dp->ds->priv; - int port = dp->index; - u32 rew_op = 0; - rew_op = ocelot_ptp_rew_op(skb); - if (rew_op) { - if (!ocelot_can_inject(ocelot, 0)) - return NULL; - - ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb); - return NULL; - } + if (ocelot_ptp_rew_op(skb)) + return ocelot_defer_xmit(dp, skb); return dsa_8021q_xmit(skb, netdev, ETH_P_8021Q, ((pcp << VLAN_PRIO_SHIFT) | tx_vid)); -- cgit v1.2.3 From 1328a883258b4507909090ed0a9ad63771f9f780 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:42 +0300 Subject: net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/ocelot/felix.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index f8603e068e7c..9af8f900aa56 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1074,6 +1074,33 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) return 0; } +static void ocelot_port_purge_txtstamp_skb(struct ocelot *ocelot, int port, + struct sk_buff *skb) +{ + struct ocelot_port *ocelot_port = ocelot->ports[port]; + struct sk_buff *clone = OCELOT_SKB_CB(skb)->clone; + struct sk_buff *skb_match = NULL, *skb_tmp; + unsigned long flags; + + if (!clone) + return; + + spin_lock_irqsave(&ocelot_port->tx_skbs.lock, flags); + + skb_queue_walk_safe(&ocelot_port->tx_skbs, skb, skb_tmp) { + if (skb != clone) + continue; + __skb_unlink(skb, &ocelot_port->tx_skbs); + skb_match = skb; + break; + } + + spin_unlock_irqrestore(&ocelot_port->tx_skbs.lock, flags); + + WARN_ONCE(!skb_match, + "Could not find skb clone in TX timestamping list\n"); +} + #define work_to_xmit_work(w) \ container_of((w), struct felix_deferred_xmit_work, work) @@ -1097,6 +1124,7 @@ static void felix_port_deferred_xmit(struct kthread_work *work) if (!retries) { dev_err(ocelot->dev, "port %d failed to inject skb\n", port); + ocelot_port_purge_txtstamp_skb(ocelot, port, skb); kfree_skb(skb); return; } -- cgit v1.2.3 From 43ba33b4f143965a451cfdc1e826b61f6933c887 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:43 +0300 Subject: net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports When setting up a bridge with stp_state 1, topology changes are not detected and loops are not blocked. This is because the standard way of transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the right egress port, does not override the port STP state (in the case of Ocelot switches, that's really the PGID_SRC masks). To force a packet to be injected into a port that's BLOCKING, we must send it as a control packet, which means in the case of this tagger to send it using the manual register injection method. We already do this for PTP frames, extend the logic to apply to any link-local MAC DA. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- net/dsa/tag_ocelot_8021q.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index d05c352f96e5..3412051981d7 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -42,8 +42,9 @@ static struct sk_buff *ocelot_xmit(struct sk_buff *skb, u16 tx_vid = dsa_8021q_tx_vid(dp->ds, dp->index); u16 queue_mapping = skb_get_queue_mapping(skb); u8 pcp = netdev_txq_to_tc(netdev, queue_mapping); + struct ethhdr *hdr = eth_hdr(skb); - if (ocelot_ptp_rew_op(skb)) + if (ocelot_ptp_rew_op(skb) || is_link_local_ether_addr(hdr->h_dest)) return ocelot_defer_xmit(dp, skb); return dsa_8021q_xmit(skb, netdev, ETH_P_8021Q, -- cgit v1.2.3 From 8d5f7954b7c8de54902a8beda141064a7e2e6ee0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 12 Oct 2021 14:40:44 +0300 Subject: net: dsa: felix: break at first CPU port during init and teardown The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/dsa/ocelot/felix.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 9af8f900aa56..341236dcbdb4 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -266,12 +266,12 @@ static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port) */ static int felix_setup_mmio_filtering(struct felix *felix) { - unsigned long user_ports = 0, cpu_ports = 0; + unsigned long user_ports = dsa_user_ports(felix->ds); struct ocelot_vcap_filter *redirect_rule; struct ocelot_vcap_filter *tagging_rule; struct ocelot *ocelot = &felix->ocelot; struct dsa_switch *ds = felix->ds; - int port, ret; + int cpu = -1, port, ret; tagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL); if (!tagging_rule) @@ -284,12 +284,15 @@ static int felix_setup_mmio_filtering(struct felix *felix) } for (port = 0; port < ocelot->num_phys_ports; port++) { - if (dsa_is_user_port(ds, port)) - user_ports |= BIT(port); - if (dsa_is_cpu_port(ds, port)) - cpu_ports |= BIT(port); + if (dsa_is_cpu_port(ds, port)) { + cpu = port; + break; + } } + if (cpu < 0) + return -EINVAL; + tagging_rule->key_type = OCELOT_VCAP_KEY_ETYPE; *(__be16 *)tagging_rule->key.etype.etype.value = htons(ETH_P_1588); *(__be16 *)tagging_rule->key.etype.etype.mask = htons(0xffff); @@ -325,7 +328,7 @@ static int felix_setup_mmio_filtering(struct felix *felix) * the CPU port module */ redirect_rule->action.mask_mode = OCELOT_MASK_MODE_REDIRECT; - redirect_rule->action.port_mask = cpu_ports; + redirect_rule->action.port_mask = BIT(cpu); } else { /* Trap PTP packets only to the CPU port module (which is * redirected to the NPI port) @@ -1235,6 +1238,7 @@ static int felix_setup(struct dsa_switch *ds) * there's no real point in checking for errors. */ felix_set_tag_protocol(ds, port, felix->tag_proto); + break; } ds->mtu_enforcement_ingress = true; @@ -1275,6 +1279,7 @@ static void felix_teardown(struct dsa_switch *ds) continue; felix_del_tag_protocol(ds, port, felix->tag_proto); + break; } for (port = 0; port < ocelot->num_phys_ports; port++) { -- cgit v1.2.3 From 2b94b6b79b7c24092a6169db9e83c4565be0db42 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Tue, 12 Oct 2021 15:15:56 +0800 Subject: PCI/MSI: Handle msi_populate_sysfs() errors correctly Previously, when msi_populate_sysfs() failed, we saved the error return value as dev->msi_irq_groups, which leads to a page fault when free_msi_irqs() calls msi_destroy_sysfs(). To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs() fails. Found by the Hulk Robot when injecting a memory allocation fault in msi_populate_sysfs(): BUG: unable to handle page fault for address: fffffffffffffff4 ... Call Trace: msi_destroy_sysfs+0x30/0xa0 free_msi_irqs+0x11d/0x1b0 Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core") Link: https://lore.kernel.org/r/20211012071556.939137-1-wanghai38@huawei.com Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Bjorn Helgaas Acked-by: Barry Song --- drivers/pci/msi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 0099a00af361..4b4792940e86 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -535,6 +535,7 @@ static int msi_verify_entries(struct pci_dev *dev) static int msi_capability_init(struct pci_dev *dev, int nvec, struct irq_affinity *affd) { + const struct attribute_group **groups; struct msi_desc *entry; int ret; @@ -558,12 +559,14 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, if (ret) goto err; - dev->msi_irq_groups = msi_populate_sysfs(&dev->dev); - if (IS_ERR(dev->msi_irq_groups)) { - ret = PTR_ERR(dev->msi_irq_groups); + groups = msi_populate_sysfs(&dev->dev); + if (IS_ERR(groups)) { + ret = PTR_ERR(groups); goto err; } + dev->msi_irq_groups = groups; + /* Set MSI enabled bits */ pci_intx_for_msi(dev, 0); pci_msi_set_enable(dev, 1); @@ -691,6 +694,7 @@ static void msix_mask_all(void __iomem *base, int tsize) static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, int nvec, struct irq_affinity *affd) { + const struct attribute_group **groups; void __iomem *base; int ret, tsize; u16 control; @@ -730,12 +734,14 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, msix_update_entries(dev, entries); - dev->msi_irq_groups = msi_populate_sysfs(&dev->dev); - if (IS_ERR(dev->msi_irq_groups)) { - ret = PTR_ERR(dev->msi_irq_groups); + groups = msi_populate_sysfs(&dev->dev); + if (IS_ERR(groups)) { + ret = PTR_ERR(groups); goto out_free; } + dev->msi_irq_groups = groups; + /* Set MSI-X enabled bits and unmask the function */ pci_intx_for_msi(dev, 0); dev->msix_enabled = 1; -- cgit v1.2.3 From 6fd13d699d24beaa28310848fe65fd898fbb9043 Mon Sep 17 00:00:00 2001 From: "Andrea Parri (Microsoft)" Date: Thu, 7 Oct 2021 14:28:28 +0200 Subject: scsi: storvsc: Fix validation for unsolicited incoming packets The validation on the length of incoming packets performed in storvsc_on_channel_callback() does not apply to unsolicited packets with ID of 0 sent by Hyper-V. Adjust the validation for such unsolicited packets. Link: https://lore.kernel.org/r/20211007122828.469289-1-parri.andrea@gmail.com Fixes: 91b1b640b834b2 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()") Reported-by: Dexuan Cui Reviewed-by: Michael Kelley Reviewed-by: Haiyang Zhang Signed-off-by: Andrea Parri (Microsoft) Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index ebbbc1299c62..9eb1b88a29dd 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1285,11 +1285,15 @@ static void storvsc_on_channel_callback(void *context) foreach_vmbus_pkt(desc, channel) { struct vstor_packet *packet = hv_pkt_data(desc); struct storvsc_cmd_request *request = NULL; + u32 pktlen = hv_pkt_datalen(desc); u64 rqst_id = desc->trans_id; + u32 minlen = rqst_id ? sizeof(struct vstor_packet) - + stor_device->vmscsi_size_delta : sizeof(enum vstor_packet_operation); - if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - - stor_device->vmscsi_size_delta) { - dev_err(&device->device, "Invalid packet len\n"); + if (pktlen < minlen) { + dev_err(&device->device, + "Invalid pkt: id=%llu, len=%u, minlen=%u\n", + rqst_id, pktlen, minlen); continue; } @@ -1302,13 +1306,23 @@ static void storvsc_on_channel_callback(void *context) if (rqst_id == 0) { /* * storvsc_on_receive() looks at the vstor_packet in the message - * from the ring buffer. If the operation in the vstor_packet is - * COMPLETE_IO, then we call storvsc_on_io_completion(), and - * dereference the guest memory address. Make sure we don't call - * storvsc_on_io_completion() with a guest memory address that is - * zero if Hyper-V were to construct and send such a bogus packet. + * from the ring buffer. + * + * - If the operation in the vstor_packet is COMPLETE_IO, then + * we call storvsc_on_io_completion(), and dereference the + * guest memory address. Make sure we don't call + * storvsc_on_io_completion() with a guest memory address + * that is zero if Hyper-V were to construct and send such + * a bogus packet. + * + * - If the operation in the vstor_packet is FCHBA_DATA, then + * we call cache_wwn(), and access the data payload area of + * the packet (wwn_packet); however, there is no guarantee + * that the packet is big enough to contain such area. + * Future-proof the code by rejecting such a bogus packet. */ - if (packet->operation == VSTOR_OPERATION_COMPLETE_IO) { + if (packet->operation == VSTOR_OPERATION_COMPLETE_IO || + packet->operation == VSTOR_OPERATION_FCHBA_DATA) { dev_err(&device->device, "Invalid packet with ID of 0\n"); continue; } -- cgit v1.2.3 From f2b85040acec9a928b4eb1b57a989324e8e38d3f Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 8 Oct 2021 13:01:18 +0800 Subject: scsi: core: Put LLD module refcnt after SCSI device is released SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi. Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com Cc: Greg Kroah-Hartman Reported-by: Changhui Zhong Reported-by: Yi Zhang Tested-by: Yi Zhang Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi.c | 4 +++- drivers/scsi/scsi_sysfs.c | 9 +++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index b241f9e3885c..291ecc33b1fe 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -553,8 +553,10 @@ EXPORT_SYMBOL(scsi_device_get); */ void scsi_device_put(struct scsi_device *sdev) { - module_put(sdev->host->hostt->module); + struct module *mod = sdev->host->hostt->module; + put_device(&sdev->sdev_gendev); + module_put(mod); } EXPORT_SYMBOL(scsi_device_put); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 86793259e541..a35841b34bfd 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -449,9 +449,12 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL; struct scsi_vpd *vpd_pg0 = NULL, *vpd_pg89 = NULL; unsigned long flags; + struct module *mod; sdev = container_of(work, struct scsi_device, ew.work); + mod = sdev->host->hostt->module; + scsi_dh_release_device(sdev); parent = sdev->sdev_gendev.parent; @@ -502,11 +505,17 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) if (parent) put_device(parent); + module_put(mod); } static void scsi_device_dev_release(struct device *dev) { struct scsi_device *sdp = to_scsi_device(dev); + + /* Set module pointer as NULL in case of module unloading */ + if (!try_module_get(sdp->host->hostt->module)) + sdp->host->hostt->module = NULL; + execute_in_process_context(scsi_device_dev_release_usercontext, &sdp->ew); } -- cgit v1.2.3 From 6e44bd6d34d659c44cd8e7fc925c8a97f49b3c33 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 13 Oct 2021 08:36:59 +0300 Subject: memblock: exclude NOMAP regions from kmemleak Vladimir Zapolskiy reports: commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac Indeed, NOMAP regions don't have linear map entries so an attempt to scan these areas would fault. Prevent such faults by excluding NOMAP regions from kmemleak. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Mike Rapoport Tested-by: Vladimir Zapolskiy --- mm/memblock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 184dcd2e5d99..5c3503c98b2f 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -936,7 +936,12 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size) */ int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size) { - return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP); + int ret = memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP); + + if (!ret) + kmemleak_free_part_phys(base, size); + + return ret; } /** -- cgit v1.2.3 From 6f779e1d359b8d5801f677c1d49dcfa10bf95674 Mon Sep 17 00:00:00 2001 From: Cédric Le Goater Date: Mon, 11 Oct 2021 09:02:03 +0200 Subject: powerpc/xive: Discard disabled interrupts in get_irqchip_state() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When an interrupt is passed through, the KVM XIVE device calls the set_vcpu_affinity() handler which raises the P bit to mask the interrupt and to catch any in-flight interrupts while routing the interrupt to the guest. On the guest side, drivers (like some Intels) can request at probe time some MSIs and call synchronize_irq() to check that there are no in flight interrupts. This will call the XIVE get_irqchip_state() handler which will always return true as the interrupt P bit has been set on the host side and lock the CPU in an infinite loop. Fix that by discarding disabled interrupts in get_irqchip_state(). Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org #v5.4+ Signed-off-by: Cédric Le Goater Tested-by: seeteena Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org --- arch/powerpc/sysdev/xive/common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c index c732ce5a3e1a..c5d75c02ad8b 100644 --- a/arch/powerpc/sysdev/xive/common.c +++ b/arch/powerpc/sysdev/xive/common.c @@ -945,7 +945,8 @@ static int xive_get_irqchip_state(struct irq_data *data, * interrupt to be inactive in that case. */ *state = (pq != XIVE_ESB_INVALID) && !xd->stale_p && - (xd->saved_p || !!(pq & XIVE_ESB_VAL_P)); + (xd->saved_p || (!!(pq & XIVE_ESB_VAL_P) && + !irqd_irq_disabled(data))); return 0; default: return -EINVAL; -- cgit v1.2.3 From 6d7163f2c49fda5658e43105a96b555c89a4548d Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Wed, 13 Oct 2021 10:45:52 +0300 Subject: mei: hbm: drop hbm responses on early shutdown Drop HBM responses also in the early shutdown phase where the usual traffic is allowed. Extend the rule that drop HBM responses received during the shutdown phase by also in MEI_DEV_POWERING_DOWN state. This resolves the stall if the driver is stopping in the middle of the link init or link reset. Fixes: da3eb47c90d4 ("mei: hbm: drop hbm responses on shutdown") Fixes: 36edb1407c3c ("mei: allow clients on bus to communicate in remove callback") Cc: # v5.12+ Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20211013074552.2278419-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 99b5c1ecc444..be41843df75b 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -1298,7 +1298,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) if (dev->dev_state != MEI_DEV_INIT_CLIENTS || dev->hbm_state != MEI_HBM_STARTING) { - if (dev->dev_state == MEI_DEV_POWER_DOWN) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { dev_dbg(dev->dev, "hbm: start: on shutdown, ignoring\n"); return 0; } @@ -1381,7 +1382,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) if (dev->dev_state != MEI_DEV_INIT_CLIENTS || dev->hbm_state != MEI_HBM_DR_SETUP) { - if (dev->dev_state == MEI_DEV_POWER_DOWN) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { dev_dbg(dev->dev, "hbm: dma setup response: on shutdown, ignoring\n"); return 0; } @@ -1448,7 +1450,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) if (dev->dev_state != MEI_DEV_INIT_CLIENTS || dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) { - if (dev->dev_state == MEI_DEV_POWER_DOWN) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { dev_dbg(dev->dev, "hbm: properties response: on shutdown, ignoring\n"); return 0; } @@ -1490,7 +1493,8 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) if (dev->dev_state != MEI_DEV_INIT_CLIENTS || dev->hbm_state != MEI_HBM_ENUM_CLIENTS) { - if (dev->dev_state == MEI_DEV_POWER_DOWN) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { dev_dbg(dev->dev, "hbm: enumeration response: on shutdown, ignoring\n"); return 0; } -- cgit v1.2.3 From af628cdd64e11f03181a5a19645768ed4687bda4 Mon Sep 17 00:00:00 2001 From: Matthew Brost Date: Fri, 1 Oct 2021 08:58:25 -0700 Subject: drm/i915: Fix bug in user proto-context creation that leaked contexts Set number of engines before attempting to create contexts so the function free_engines can clean up properly. Also check return of alloc_engines for NULL. v2: (Tvrtko) - Send as stand alone patch (John Harrison) - Check for alloc_engines returning NULL v3: (Checkpatch / Tvrtko) - Remove braces around single line if statement Cc: Jason Ekstrand Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Reviewed-by: Tvrtko Ursulin Signed-off-by: Matthew Brost Cc: Signed-off-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com (cherry picked from commit 84edf53776343d6b5bf5fa59a6f600a22ca23c40) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_context.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_context.c b/drivers/gpu/drm/i915/gem/i915_gem_context.c index 9ccf4b29b82e..166bb46408a9 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_context.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_context.c @@ -937,6 +937,10 @@ static struct i915_gem_engines *user_engines(struct i915_gem_context *ctx, unsigned int n; e = alloc_engines(num_engines); + if (!e) + return ERR_PTR(-ENOMEM); + e->num_engines = num_engines; + for (n = 0; n < num_engines; n++) { struct intel_context *ce; int ret; @@ -970,7 +974,6 @@ static struct i915_gem_engines *user_engines(struct i915_gem_context *ctx, goto free_engines; } } - e->num_engines = num_engines; return e; -- cgit v1.2.3 From 82a59c7f456db9f2874e9f1e9cb4cc19e71e95c5 Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Mon, 6 Sep 2021 11:35:41 +0800 Subject: drm/i915: Free the returned object of acpi_evaluate_dsm() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As per the comment on top of acpi_evaluate_dsm(): | * Evaluate device's _DSM method with specified GUID, revision id and | * function number. Caller needs to free the returned object. We should free the returned object of acpi_evaluate_dsm() to avoid memory leakage. Otherwise the kmemleak splat will be triggered at boot time (if we compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y). Fixes: 8e55f99c510f ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops") Cc: Kai-Heng Feng Signed-off-by: Zenghui Yu Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com (cherry picked from commit 149ac2e7ae1845191bd18b66a725392ac83a0c47) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_acpi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_acpi.c b/drivers/gpu/drm/i915/display/intel_acpi.c index 7cfe91fc05f2..68abeaf2d7d4 100644 --- a/drivers/gpu/drm/i915/display/intel_acpi.c +++ b/drivers/gpu/drm/i915/display/intel_acpi.c @@ -186,13 +186,16 @@ void intel_dsm_get_bios_data_funcs_supported(struct drm_i915_private *i915) { struct pci_dev *pdev = to_pci_dev(i915->drm.dev); acpi_handle dhandle; + union acpi_object *obj; dhandle = ACPI_HANDLE(&pdev->dev); if (!dhandle) return; - acpi_evaluate_dsm(dhandle, &intel_dsm_guid2, INTEL_DSM_REVISION_ID, - INTEL_DSM_FN_GET_BIOS_DATA_FUNCS_SUPPORTED, NULL); + obj = acpi_evaluate_dsm(dhandle, &intel_dsm_guid2, INTEL_DSM_REVISION_ID, + INTEL_DSM_FN_GET_BIOS_DATA_FUNCS_SUPPORTED, NULL); + if (obj) + ACPI_FREE(obj); } /* -- cgit v1.2.3 From c2115b2b16421d93d4993f3fe4c520e91d6fe801 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 6 Oct 2021 00:16:31 +0200 Subject: usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_dsps.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index ce9fc46c9266..b5935834f9d2 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -899,11 +899,13 @@ static int dsps_probe(struct platform_device *pdev) if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) { ret = dsps_setup_optional_vbus_irq(pdev, glue); if (ret) - goto err; + goto unregister_pdev; } return 0; +unregister_pdev: + platform_device_unregister(glue->musb); err: pm_runtime_disable(&pdev->dev); iounmap(glue->usbss_base); -- cgit v1.2.3 From 2f9a174f918e29608564c7a4e8329893ab604fb4 Mon Sep 17 00:00:00 2001 From: Halil Pasic Date: Mon, 11 Oct 2021 07:39:21 +0200 Subject: virtio: write back F_VERSION_1 before validate The virtio specification virtio-v1.1-cs01 states: "Transitional devices MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not been acknowledged by the driver." This is exactly what QEMU as of 6.1 has done relying solely on VIRTIO_F_VERSION_1 for detecting that. However, the specification also says: "... the driver MAY read (but MUST NOT write) the device-specific configuration fields to check that it can support the device ..." before setting FEATURES_OK. In that case, any transitional device relying solely on VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in legacy format. In particular, this implies that it is in big endian format for big endian guests. This naturally confuses the driver which expects little endian in the modern mode. It is probably a good idea to amend the spec to clarify that VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation is complete. Before validate callback existed, config space was only read after FEATURES_OK. However, we already have two regressions, so let's address this here as well. The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when virtio 1.0 is used on both sides. The latter renders virtio-blk unusable with DASD backing, because things simply don't work with the default. See Fixes tags for relevant commits. For QEMU, we can work around the issue by writing out the feature bits with VIRTIO_F_VERSION_1 bit set. We (ab)use the finalize_features config op for this. This isn't enough to address all vhost devices since these do not get the features until FEATURES_OK, however it looks like the affected devices actually never handled the endianness for legacy mode correctly, so at least that's not a regression. No devices except virtio net and virtio blk seem to be affected. Long term the right thing to do is to fix the hypervisors. Cc: #v4.11 Signed-off-by: Halil Pasic Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range") Reported-by: markver@us.ibm.com Reviewed-by: Cornelia Huck Link: https://lore.kernel.org/r/20211011053921.1198936-1-pasic@linux.ibm.com Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0a5b54034d4b..236081afe9a2 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -239,6 +239,17 @@ static int virtio_dev_probe(struct device *_d) driver_features_legacy = driver_features; } + /* + * Some devices detect legacy solely via F_VERSION_1. Write + * F_VERSION_1 to force LE config space accesses before FEATURES_OK for + * these when needed. + */ + if (drv->validate && !virtio_legacy_is_little_endian() + && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) { + dev->features = BIT_ULL(VIRTIO_F_VERSION_1); + dev->config->finalize_features(dev); + } + if (device_features & (1ULL << VIRTIO_F_VERSION_1)) dev->features = driver_features & device_features; else -- cgit v1.2.3 From 97f854be203883b61d24f230445bd533bbdf770c Mon Sep 17 00:00:00 2001 From: Wu Zongyong Date: Wed, 15 Sep 2021 14:39:32 +0800 Subject: vhost_vdpa: unset vq irq before freeing irq Currently we unset vq irq after freeing irq and that will result in error messages: pi_update_irte: failed to update PI IRTE irq bypass consumer (token 000000005a07a12b) unregistration fails: -22 This patch solves this. Signed-off-by: Wu Zongyong Link: https://lore.kernel.org/r/02637d38dcf4e4b836c5b3a65055fe92bf812b3b.1631687872.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vhost/vdpa.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 35927ceb26ff..924751427cd2 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -173,6 +173,10 @@ static long vhost_vdpa_set_status(struct vhost_vdpa *v, u8 __user *statusp) if (status != 0 && (ops->get_status(vdpa) & ~status) != 0) return -EINVAL; + if ((status_old & VIRTIO_CONFIG_S_DRIVER_OK) && !(status & VIRTIO_CONFIG_S_DRIVER_OK)) + for (i = 0; i < nvqs; i++) + vhost_vdpa_unsetup_vq_irq(v, i); + if (status == 0) { ret = ops->reset(vdpa); if (ret) @@ -184,10 +188,6 @@ static long vhost_vdpa_set_status(struct vhost_vdpa *v, u8 __user *statusp) for (i = 0; i < nvqs; i++) vhost_vdpa_setup_vq_irq(v, i); - if ((status_old & VIRTIO_CONFIG_S_DRIVER_OK) && !(status & VIRTIO_CONFIG_S_DRIVER_OK)) - for (i = 0; i < nvqs; i++) - vhost_vdpa_unsetup_vq_irq(v, i); - return 0; } -- cgit v1.2.3 From ff63198850f33eab54b2da6905380fd4d4fc0739 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 4 Oct 2021 11:31:00 -0400 Subject: Revert "virtio-blk: Add validation for block size in config space" It turns out that access to config space before completing the feature negotiation is broken for big endian guests at least with QEMU hosts up to 6.1 inclusive. This affects any device that accesses config space in the validate callback: at the moment that is virtio-net with VIRTIO_NET_F_MTU but since 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") that also started affecting virtio-blk with VIRTIO_BLK_F_BLK_SIZE. Further, unlike VIRTIO_NET_F_MTU which is off by default on QEMU, VIRTIO_BLK_F_BLK_SIZE is on by default, which resulted in lots of people not being able to boot VMs on BE. The spec is very clear that what we are doing is legal so QEMU needs to be fixed, but given it's been broken for so many years and no one noticed, we need to give QEMU a bit more time before applying this. Further, this patch is incomplete (does not check blk size is a power of two) and it duplicates the logic from nbd. Revert for now, and we'll reapply a cleaner logic in the next release. Cc: stable@vger.kernel.org Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") Cc: Xie Yongji Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 37 ++++++------------------------------- 1 file changed, 6 insertions(+), 31 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 9b3bd083b411..303caf2d17d0 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -689,28 +689,6 @@ static const struct blk_mq_ops virtio_mq_ops = { static unsigned int virtblk_queue_depth; module_param_named(queue_depth, virtblk_queue_depth, uint, 0444); -static int virtblk_validate(struct virtio_device *vdev) -{ - u32 blk_size; - - if (!vdev->config->get) { - dev_err(&vdev->dev, "%s failure: config access disabled\n", - __func__); - return -EINVAL; - } - - if (!virtio_has_feature(vdev, VIRTIO_BLK_F_BLK_SIZE)) - return 0; - - blk_size = virtio_cread32(vdev, - offsetof(struct virtio_blk_config, blk_size)); - - if (blk_size < SECTOR_SIZE || blk_size > PAGE_SIZE) - __virtio_clear_bit(vdev, VIRTIO_BLK_F_BLK_SIZE); - - return 0; -} - static int virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; @@ -722,6 +700,12 @@ static int virtblk_probe(struct virtio_device *vdev) u8 physical_block_exp, alignment_offset; unsigned int queue_depth; + if (!vdev->config->get) { + dev_err(&vdev->dev, "%s failure: config access disabled\n", + __func__); + return -EINVAL; + } + err = ida_simple_get(&vd_index_ida, 0, minor_to_index(1 << MINORBITS), GFP_KERNEL); if (err < 0) @@ -836,14 +820,6 @@ static int virtblk_probe(struct virtio_device *vdev) else blk_size = queue_logical_block_size(q); - if (blk_size < SECTOR_SIZE || blk_size > PAGE_SIZE) { - dev_err(&vdev->dev, - "block size is changed unexpectedly, now is %u\n", - blk_size); - err = -EINVAL; - goto out_cleanup_disk; - } - /* Use topology information if available */ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY, struct virtio_blk_config, physical_block_exp, @@ -1009,7 +985,6 @@ static struct virtio_driver virtio_blk = { .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, - .validate = virtblk_validate, .probe = virtblk_probe, .remove = virtblk_remove, .config_changed = virtblk_config_changed, -- cgit v1.2.3 From 8b7216439e2e2128f6f1a19ad4b6be94d8b0e23d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Oct 2021 11:45:38 +0200 Subject: s390: add Alexander Gordeev as reviewer Alexander Gordeev will help reviewing s390 code. Acked-by: Alexander Gordeev Acked-by: Vasily Gorbik Acked-by: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 92db89512678..888b329413d3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16296,6 +16296,7 @@ S390 M: Heiko Carstens M: Vasily Gorbik M: Christian Borntraeger +R: Alexander Gordeev L: linux-s390@vger.kernel.org S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ -- cgit v1.2.3 From 09b6addf64860bf7b0e3dddf03229c8c20eda4b5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Oct 2021 13:29:04 -0700 Subject: VDUSE: fix documentation underline warning Fix a VDUSE documentation build warning: Documentation/userspace-api/vduse.rst:21: WARNING: Title underline too short. Fixes: 7bc7f61897b6 ("Documentation: Add documentation for VDUSE") Signed-off-by: Randy Dunlap Cc: Xie Yongji Cc: Jason Wang Cc: Michael S. Tsirkin Cc: virtualization@lists.linux-foundation.org Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20211006202904.30241-1-rdunlap@infradead.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Xie Yongji Acked-by: Jason Wang --- Documentation/userspace-api/vduse.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst index 42ef59ea5314..bdb880e01132 100644 --- a/Documentation/userspace-api/vduse.rst +++ b/Documentation/userspace-api/vduse.rst @@ -18,7 +18,7 @@ types can be added after the security issue of corresponding device driver is clarified or fixed in the future. Create/Destroy VDUSE devices ------------------------- +---------------------------- VDUSE devices are created as follows: -- cgit v1.2.3 From bcef9356fc2e1302daf373c83c826aa27954d128 Mon Sep 17 00:00:00 2001 From: Cindy Lu Date: Wed, 29 Sep 2021 17:09:33 +0800 Subject: vhost-vdpa: Fix the wrong input in config_cb Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb, the input cb.private was used as struct vhost_vdpa, so the input was wrong here, fix this issue Fixes: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Signed-off-by: Cindy Lu Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 924751427cd2..39039e046117 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -322,7 +322,7 @@ static long vhost_vdpa_set_config_call(struct vhost_vdpa *v, u32 __user *argp) struct eventfd_ctx *ctx; cb.callback = vhost_vdpa_config_cb; - cb.private = v->vdpa; + cb.private = v; if (copy_from_user(&fd, argp, sizeof(fd))) return -EFAULT; -- cgit v1.2.3 From 5d388fa01fa6eb310ac023a363a6cb216d9d8fe9 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 13 Oct 2021 13:45:11 +0100 Subject: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Cc: Douglas Anderson Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 3d87fadaa160..8976da38b375 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -1383,7 +1383,8 @@ static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf) *p-- = 0; /* clear msb bits if any leftover in the last byte */ - *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); + if (cell->nbits % BITS_PER_BYTE) + *p &= GENMASK((cell->nbits % BITS_PER_BYTE) - 1, 0); } static int __nvmem_cell_read(struct nvmem_device *nvmem, -- cgit v1.2.3 From 6b9b546dc00797c74bef491668ce5431ff54e1e2 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Wed, 13 Oct 2021 13:17:04 +0800 Subject: ASoC: wm8960: Fix clock configuration on slave mode There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang Acked-by: Charles Keepax Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm8960.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 9e621a254392..499604f1e178 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -742,9 +742,16 @@ static int wm8960_configure_clocking(struct snd_soc_component *component) int i, j, k; int ret; - if (!(iface1 & (1<<6))) { - dev_dbg(component->dev, - "Codec is slave mode, no need to configure clock\n"); + /* + * For Slave mode clocking should still be configured, + * so this if statement should be removed, but some platform + * may not work if the sysclk is not configured, to avoid such + * compatible issue, just add '!wm8960->sysclk' condition in + * this if statement. + */ + if (!(iface1 & (1 << 6)) && !wm8960->sysclk) { + dev_warn(component->dev, + "slave mode, but proceeding with no clock configuration\n"); return 0; } -- cgit v1.2.3 From e599ee234ad4fdfe241d937bbabd96e0d8f9d868 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 12 Oct 2021 11:34:46 +0200 Subject: net: arc: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/arc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig index 37a41773dd43..92a79c4ffa2c 100644 --- a/drivers/net/ethernet/arc/Kconfig +++ b/drivers/net/ethernet/arc/Kconfig @@ -21,6 +21,7 @@ config ARC_EMAC_CORE depends on ARC || ARCH_ROCKCHIP || COMPILE_TEST select MII select PHYLIB + select CRC32 config ARC_EMAC tristate "ARC EMAC support" -- cgit v1.2.3 From e41bdd18644a5dde1f344b70eb262b5c426e6f16 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 19 Sep 2021 10:23:08 +0800 Subject: clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc It looks that the offset 0x7d060 is a copy & paste from above hlos1_vote_turing_mmu_tbu1_gdsc. Correct it to 0x7d07c as per downstream kernel. Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115") Signed-off-by: Shawn Guo Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-sm6115.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-sm6115.c b/drivers/clk/qcom/gcc-sm6115.c index bc09736ece76..68fe9f6f0d2f 100644 --- a/drivers/clk/qcom/gcc-sm6115.c +++ b/drivers/clk/qcom/gcc-sm6115.c @@ -3242,7 +3242,7 @@ static struct gdsc hlos1_vote_turing_mmu_tbu1_gdsc = { }; static struct gdsc hlos1_vote_turing_mmu_tbu0_gdsc = { - .gdscr = 0x7d060, + .gdscr = 0x7d07c, .pd = { .name = "hlos1_vote_turing_mmu_tbu0", }, -- cgit v1.2.3 From 92c02ff1a43edce37cf1b092bfad37d84d7e4ea6 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Thu, 7 Oct 2021 23:24:28 +0200 Subject: clk: qcom: add select QCOM_GDSC for SM6350 QCOM_GDSC is needed for the gcc driver to probe. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz Signed-off-by: Stephen Boyd --- drivers/clk/qcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 0a5596797b93..9ef007b3cf9b 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -564,6 +564,7 @@ config SM_GCC_6125 config SM_GCC_6350 tristate "SM6350 Global Clock Controller" + select QCOM_GDSC help Support for the global clock controller on SM6350 devices. Say Y if you want to use peripheral devices such as UART, -- cgit v1.2.3 From 0f0f80d9d5db0b9a78a6ec74714f08b7b8bda0de Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 10 Oct 2021 19:27:03 +0200 Subject: iommu/arm: fix ARM_SMMU_QCOM compilation My previous bugfix ended up making things worse for the QCOM IOMMU driver when it forgot to add the Kconfig symbol that is getting used to control the compilation of the SMMU implementation specific code for Qualcomm. Fixes: 424953cf3c66 ("qcom_scm: hide Kconfig symbol") Reported-by: Daniel Lezcano Reported-by: Dmitry Baryshkov Reported-by: John Stultz Link: https://lore.kernel.org/lkml/20211010023350.978638-1-dmitry.baryshkov@linaro.org/ Acked-by: Will Deacon Signed-off-by: Arnd Bergmann --- drivers/iommu/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index c5c71b7ab7e8..3eb68fa1b8cc 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -355,6 +355,14 @@ config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT 'arm-smmu.disable_bypass' will continue to override this config. +config ARM_SMMU_QCOM + def_tristate y + depends on ARM_SMMU && ARCH_QCOM + select QCOM_SCM + help + When running on a Qualcomm platform that has the custom variant + of the ARM SMMU, this needs to be built into the SMMU driver. + config ARM_SMMU_V3 tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support" depends on ARM64 -- cgit v1.2.3 From 427f974d9727ca681085ddcd0530c97ab5811ae0 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 12 Oct 2021 17:25:09 +0200 Subject: net: korina: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291bcd5f9 ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Acked-by: Florian fainelli Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index d796684ec9ca..412ae3e43ffb 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -100,6 +100,7 @@ config JME config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on MIKROTIK_RB532 || COMPILE_TEST + select CRC32 select MII help If you have a Mikrotik RouterBoard 500 or IDT RC32434 -- cgit v1.2.3 From f03dca0c9e2297c84a018e306f8a9cd534ee4287 Mon Sep 17 00:00:00 2001 From: Nanyong Sun Date: Tue, 12 Oct 2021 20:59:01 +0800 Subject: net: encx24j600: check error in devm_regmap_init_encx24j600 devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot Signed-off-by: Nanyong Sun Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/microchip/encx24j600-regmap.c | 10 ++++++++-- drivers/net/ethernet/microchip/encx24j600.c | 5 ++++- drivers/net/ethernet/microchip/encx24j600_hw.h | 4 ++-- 3 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c index 796e46a53926..81a8ccca7e5e 100644 --- a/drivers/net/ethernet/microchip/encx24j600-regmap.c +++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c @@ -497,13 +497,19 @@ static struct regmap_bus phymap_encx24j600 = { .reg_read = regmap_encx24j600_phy_reg_read, }; -void devm_regmap_init_encx24j600(struct device *dev, - struct encx24j600_context *ctx) +int devm_regmap_init_encx24j600(struct device *dev, + struct encx24j600_context *ctx) { mutex_init(&ctx->mutex); regcfg.lock_arg = ctx; ctx->regmap = devm_regmap_init(dev, ®map_encx24j600, ctx, ®cfg); + if (IS_ERR(ctx->regmap)) + return PTR_ERR(ctx->regmap); ctx->phymap = devm_regmap_init(dev, &phymap_encx24j600, ctx, &phycfg); + if (IS_ERR(ctx->phymap)) + return PTR_ERR(ctx->phymap); + + return 0; } EXPORT_SYMBOL_GPL(devm_regmap_init_encx24j600); diff --git a/drivers/net/ethernet/microchip/encx24j600.c b/drivers/net/ethernet/microchip/encx24j600.c index ee921a99e439..0bc6b3176fbf 100644 --- a/drivers/net/ethernet/microchip/encx24j600.c +++ b/drivers/net/ethernet/microchip/encx24j600.c @@ -1023,10 +1023,13 @@ static int encx24j600_spi_probe(struct spi_device *spi) priv->speed = SPEED_100; priv->ctx.spi = spi; - devm_regmap_init_encx24j600(&spi->dev, &priv->ctx); ndev->irq = spi->irq; ndev->netdev_ops = &encx24j600_netdev_ops; + ret = devm_regmap_init_encx24j600(&spi->dev, &priv->ctx); + if (ret) + goto out_free; + mutex_init(&priv->lock); /* Reset device and check if it is connected */ diff --git a/drivers/net/ethernet/microchip/encx24j600_hw.h b/drivers/net/ethernet/microchip/encx24j600_hw.h index fac61a8fbd02..34c5a289898c 100644 --- a/drivers/net/ethernet/microchip/encx24j600_hw.h +++ b/drivers/net/ethernet/microchip/encx24j600_hw.h @@ -15,8 +15,8 @@ struct encx24j600_context { int bank; }; -void devm_regmap_init_encx24j600(struct device *dev, - struct encx24j600_context *ctx); +int devm_regmap_init_encx24j600(struct device *dev, + struct encx24j600_context *ctx); /* Single-byte instructions */ #define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1)) -- cgit v1.2.3 From 0398adaec3419bdfa93baae70a3b696b4abdd7ad Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 8 Oct 2021 22:59:36 +0200 Subject: Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 2ae80900f239484069569380e1fc4340fd6e0089. My rework was unneeded & wrong. It replaced a clear & correct "reg" property usage with a custom "offset" one. Back then I didn't understand how to properly handle CRU block binding. I heard / read about syscon and tried to use it in a totally invalid way. That change also missed Rob's review (obviously). Northstar's pin controller is a simple consistent hardware block that can be cleanly mapped using a 0x24 long reg space. Since the rework commit there wasn't any follow up modifying in-kernel DTS files to use the new binding. Broadcom also isn't known to use that bugged binding. There is close to zero chance this revert may actually cause problems / regressions. This commit is a simple revert. Example binding may (should) be updated / cleaned up but that can be handled separately. Signed-off-by: Rafał Miłecki Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20211008205938.29925-1-zajec5@gmail.com Signed-off-by: Linus Walleij --- .../devicetree/bindings/mfd/brcm,cru.yaml | 11 ++++++----- .../bindings/pinctrl/brcm,ns-pinmux.yaml | 23 ++++++++++++---------- 2 files changed, 19 insertions(+), 15 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml index fc1317ab3226..28ac60acf4ac 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -32,13 +32,13 @@ properties: "#size-cells": const: 1 - pinctrl: - $ref: ../pinctrl/brcm,ns-pinmux.yaml - patternProperties: '^clock-controller@[a-f0-9]+$': $ref: ../clock/brcm,iproc-clocks.yaml + '^pin-controller@[a-f0-9]+$': + $ref: ../pinctrl/brcm,ns-pinmux.yaml + '^thermal@[a-f0-9]+$': $ref: ../thermal/brcm,ns-thermal.yaml @@ -73,9 +73,10 @@ examples: "iprocfast", "sata1", "sata2"; }; - pinctrl { + pin-controller@1c0 { compatible = "brcm,bcm4708-pinmux"; - offset = <0x1c0>; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; }; thermal@2c0 { diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml index 470aff599c27..78600a8fe403 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -17,9 +17,6 @@ description: A list of pins varies across chipsets so few bindings are available. - Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" - node. - properties: compatible: enum: @@ -27,10 +24,11 @@ properties: - brcm,bcm4709-pinmux - brcm,bcm53012-pinmux - offset: - description: offset of pin registers in the CRU block + reg: maxItems: 1 - $ref: /schemas/types.yaml#/definitions/uint32-array + + reg-names: + const: cru_gpio_control patternProperties: '-pins$': @@ -72,19 +70,24 @@ allOf: uart1_grp ] required: - - offset + - reg + - reg-names additionalProperties: false examples: - | cru@1800c100 { - compatible = "syscon", "simple-mfd"; + compatible = "simple-bus"; reg = <0x1800c100 0x1a4>; + ranges; + #address-cells = <1>; + #size-cells = <1>; - pinctrl { + pin-controller@1c0 { compatible = "brcm,bcm4708-pinmux"; - offset = <0xc0>; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; spi-pins { function = "spi"; -- cgit v1.2.3 From 1d0a779892e8aae484e11bf5f28fb41d49e8b0f6 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 8 Oct 2021 22:59:37 +0200 Subject: dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no need to include CRU in example of this binding. It wasn't complete / correct anyway. The proper binding can be find in the mfd/brcm,cru.yaml . Signed-off-by: Rafał Miłecki Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20211008205938.29925-2-zajec5@gmail.com Signed-off-by: Linus Walleij --- .../bindings/pinctrl/brcm,ns-pinmux.yaml | 24 ++++++++-------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml index 78600a8fe403..fc39e3e9f71c 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -77,21 +77,13 @@ additionalProperties: false examples: - | - cru@1800c100 { - compatible = "simple-bus"; - reg = <0x1800c100 0x1a4>; - ranges; - #address-cells = <1>; - #size-cells = <1>; - - pin-controller@1c0 { - compatible = "brcm,bcm4708-pinmux"; - reg = <0x1c0 0x24>; - reg-names = "cru_gpio_control"; - - spi-pins { - function = "spi"; - groups = "spi_grp"; - }; + pin-controller@1800c1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1800c1c0 0x24>; + reg-names = "cru_gpio_control"; + + spi-pins { + function = "spi"; + groups = "spi_grp"; }; }; -- cgit v1.2.3 From 6dba4bdfd7a30e77b848a45404b224588bf989e5 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 8 Oct 2021 22:59:38 +0200 Subject: Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a49d784d5a8272d0f63c448fe8dc69e589db006e. The updated binding was wrong / invalid and has been reverted. There isn't any upstream kernel DTS using it and Broadcom isn't known to use it neither. There is close to zero chance this will cause regression for anyone. Actually in-kernel bcm5301x.dtsi still uses the old good binding and so it's broken since the driver update. This revert fixes it. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-ns.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-ns.c b/drivers/pinctrl/bcm/pinctrl-ns.c index e79690bd8b85..d7f8175d2c1c 100644 --- a/drivers/pinctrl/bcm/pinctrl-ns.c +++ b/drivers/pinctrl/bcm/pinctrl-ns.c @@ -5,7 +5,6 @@ #include #include -#include #include #include #include @@ -13,7 +12,6 @@ #include #include #include -#include #include #define FLAG_BCM4708 BIT(1) @@ -24,8 +22,7 @@ struct ns_pinctrl { struct device *dev; unsigned int chipset_flag; struct pinctrl_dev *pctldev; - struct regmap *regmap; - u32 offset; + void __iomem *base; struct pinctrl_desc pctldesc; struct ns_pinctrl_group *groups; @@ -232,9 +229,9 @@ static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev, unset |= BIT(pin_number); } - regmap_read(ns_pinctrl->regmap, ns_pinctrl->offset, &tmp); + tmp = readl(ns_pinctrl->base); tmp &= ~unset; - regmap_write(ns_pinctrl->regmap, ns_pinctrl->offset, tmp); + writel(tmp, ns_pinctrl->base); return 0; } @@ -266,13 +263,13 @@ static const struct of_device_id ns_pinctrl_of_match_table[] = { static int ns_pinctrl_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; const struct of_device_id *of_id; struct ns_pinctrl *ns_pinctrl; struct pinctrl_desc *pctldesc; struct pinctrl_pin_desc *pin; struct ns_pinctrl_group *group; struct ns_pinctrl_function *function; + struct resource *res; int i; ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL); @@ -290,18 +287,12 @@ static int ns_pinctrl_probe(struct platform_device *pdev) return -EINVAL; ns_pinctrl->chipset_flag = (uintptr_t)of_id->data; - ns_pinctrl->regmap = syscon_node_to_regmap(of_get_parent(np)); - if (IS_ERR(ns_pinctrl->regmap)) { - int err = PTR_ERR(ns_pinctrl->regmap); - - dev_err(dev, "Failed to map pinctrl regs: %d\n", err); - - return err; - } - - if (of_property_read_u32(np, "offset", &ns_pinctrl->offset)) { - dev_err(dev, "Failed to get register offset\n"); - return -ENOENT; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "cru_gpio_control"); + ns_pinctrl->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ns_pinctrl->base)) { + dev_err(dev, "Failed to map pinctrl regs\n"); + return PTR_ERR(ns_pinctrl->base); } memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc)); -- cgit v1.2.3 From c370bb474016ab9edfdabd7c08a88dd13a71ddbd Mon Sep 17 00:00:00 2001 From: Fabien Dessenne Date: Fri, 8 Oct 2021 14:25:17 +0200 Subject: pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume() When resuming from low power, the driver attempts to restore the configuration of some pins. This is done by a call to: stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin) where 'pin' must be a valid pin value (i.e. matching some 'groups->pin'). Fix the current implementation which uses some wrong 'pin' value. Fixes: e2f3cf18c3e2 ("pinctrl: stm32: add suspend/resume management") Signed-off-by: Fabien Dessenne Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 68b3886f9f0f..dfd8888a222a 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1644,8 +1644,8 @@ int __maybe_unused stm32_pinctrl_resume(struct device *dev) struct stm32_pinctrl_group *g = pctl->groups; int i; - for (i = g->pin; i < g->pin + pctl->ngroups; i++) - stm32_pinctrl_restore_gpio_regs(pctl, i); + for (i = 0; i < pctl->ngroups; i++, g++) + stm32_pinctrl_restore_gpio_regs(pctl, g->pin); return 0; } -- cgit v1.2.3 From 7d5fda1c841f9f3930eed61b92d542137f93fc30 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 13 Oct 2021 16:51:12 -0400 Subject: tracing: Fix event probe removal from dynamic events When an event probe is to be removed via the API that created it via the dynamic events, an -ENOENT error is returned. This is because the removal of the event probe does not expect to see the event system and name that the event probe is attached to, even though that's part of the API to create it. As the removal of probes is to use the same API as they are created. In fact, the removal is not consistent with the kprobes and uprobes removal. Fix that by allowing various ways to remove the eprobe. The eprobe is created with: e:[GROUP/]NAME SYSTEM/EVENT [OPTIONS] Have it get removed by echoing in the following into dynamic_events: # Remove all eprobes with NAME echo '-:NAME' >> dynamic_events # Remove a specific eprobe echo '-:GROUP/NAME' >> dynamic_events echo '-:GROUP/NAME SYSTEM/EVENT' >> dynamic_events echo '-:NAME SYSTEM/EVENT' >> dynamic_events echo '-:GROUP/NAME SYSTEM/EVENT OPTIONS' >> dynamic_events echo '-:NAME SYSTEM/EVENT OPTIONS' >> dynamic_events Link: https://lkml.kernel.org/r/20211012081925.0e19cc4f@gandalf.local.home Link: https://lkml.kernel.org/r/20211013205533.630722129@goodmis.org Suggested-by: Masami Hiramatsu Acked-by: Masami Hiramatsu Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_eprobe.c | 54 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_eprobe.c b/kernel/trace/trace_eprobe.c index 570d081929fb..c4a15aef36af 100644 --- a/kernel/trace/trace_eprobe.c +++ b/kernel/trace/trace_eprobe.c @@ -119,10 +119,58 @@ static bool eprobe_dyn_event_match(const char *system, const char *event, int argc, const char **argv, struct dyn_event *ev) { struct trace_eprobe *ep = to_trace_eprobe(ev); + const char *slash; - return strcmp(trace_probe_name(&ep->tp), event) == 0 && - (!system || strcmp(trace_probe_group_name(&ep->tp), system) == 0) && - trace_probe_match_command_args(&ep->tp, argc, argv); + /* + * We match the following: + * event only - match all eprobes with event name + * system and event only - match all system/event probes + * + * The below has the above satisfied with more arguments: + * + * attached system/event - If the arg has the system and event + * the probe is attached to, match + * probes with the attachment. + * + * If any more args are given, then it requires a full match. + */ + + /* + * If system exists, but this probe is not part of that system + * do not match. + */ + if (system && strcmp(trace_probe_group_name(&ep->tp), system) != 0) + return false; + + /* Must match the event name */ + if (strcmp(trace_probe_name(&ep->tp), event) != 0) + return false; + + /* No arguments match all */ + if (argc < 1) + return true; + + /* First argument is the system/event the probe is attached to */ + + slash = strchr(argv[0], '/'); + if (!slash) + slash = strchr(argv[0], '.'); + if (!slash) + return false; + + if (strncmp(ep->event_system, argv[0], slash - argv[0])) + return false; + if (strcmp(ep->event_name, slash + 1)) + return false; + + argc--; + argv++; + + /* If there are no other args, then match */ + if (argc < 1) + return true; + + return trace_probe_match_command_args(&ep->tp, argc, argv); } static struct dyn_event_operations eprobe_dyn_event_ops = { -- cgit v1.2.3 From 0282b0f0126489af5b3993e52d1a05e6c7ebc4e8 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 13 Oct 2021 16:51:13 -0400 Subject: selftests/ftrace: Update test for more eprobe removal process The removal of eprobes was broken and missed in testing. Add various ways to remove eprobes that are considered acceptable to the testing process to catch when/if they break again. Link: https://lkml.kernel.org/r/20211013205533.836644549@goodmis.org Acked-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- .../ftrace/test.d/dynevent/add_remove_eprobe.tc | 54 +++++++++++++++++++++- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc index 5f5b2ba3e557..60c02b482be8 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc @@ -11,8 +11,8 @@ SYSTEM="syscalls" EVENT="sys_enter_openat" FIELD="filename" EPROBE="eprobe_open" - -echo "e:$EPROBE $SYSTEM/$EVENT file=+0(\$filename):ustring" >> dynamic_events +OPTIONS="file=+0(\$filename):ustring" +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events grep -q "$EPROBE" dynamic_events test -d events/eprobes/$EPROBE @@ -37,4 +37,54 @@ echo "-:$EPROBE" >> dynamic_events ! grep -q "$EPROBE" dynamic_events ! test -d events/eprobes/$EPROBE +# test various ways to remove the probe (already tested with just event name) + +# With group name +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +grep -q "$EPROBE" dynamic_events +test -d events/eprobes/$EPROBE +echo "-:eprobes/$EPROBE" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + +# With group name and system/event +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +grep -q "$EPROBE" dynamic_events +test -d events/eprobes/$EPROBE +echo "-:eprobes/$EPROBE $SYSTEM/$EVENT" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + +# With just event name and system/event +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +grep -q "$EPROBE" dynamic_events +test -d events/eprobes/$EPROBE +echo "-:$EPROBE $SYSTEM/$EVENT" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + +# With just event name and system/event and options +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +grep -q "$EPROBE" dynamic_events +test -d events/eprobes/$EPROBE +echo "-:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + +# With group name and system/event and options +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +grep -q "$EPROBE" dynamic_events +test -d events/eprobes/$EPROBE +echo "-:eprobes/$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + +# Finally make sure what is in the dynamic_events file clears it too +echo "e:$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +LINE=`sed -e '/$EPROBE/s/^e/-/' < dynamic_events` +test -d events/eprobes/$EPROBE +echo "-:eprobes/$EPROBE $SYSTEM/$EVENT $OPTIONS" >> dynamic_events +! grep -q "$EPROBE" dynamic_events +! test -d events/eprobes/$EPROBE + clear_trace -- cgit v1.2.3 From 1f922d9e374f0ca7d1b241666c792f403c6120aa Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 13 Oct 2021 03:19:09 +0300 Subject: Revert "net: procfs: add seq_puts() statement for dev_mcast" This reverts commit ec18e8455484370d633a718c6456ddbf6eceef21. It turns out that there are user space programs which got broken by that change. One example is the "ifstat" program shipped by Debian: https://packages.debian.org/source/bullseye/ifstat which, confusingly enough, seems to not have anything in common with the much more familiar (at least to me) ifstat program from iproute2: https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/tree/misc/ifstat.c root@debian:~# ifstat ifstat: /proc/net/dev: unsupported format. This change modified the header (first two lines of text) in /proc/net/dev so that it looks like this: root@debian:~# cat /proc/net/dev Interface| Receive | Transmit | bytes packets errs drop fifo frame compressed multicast| bytes packets errs drop fifo colls carrier compressed lo: 97400 1204 0 0 0 0 0 0 97400 1204 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 5002206 6651 0 0 0 0 0 0 105518642 1465023 0 0 0 0 0 0 swp0: 134531 2448 0 0 0 0 0 0 99599598 1464381 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 4867675 4203 0 0 0 0 0 0 58134 631 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 124739 2448 0 1422 0 0 0 0 93741184 1464369 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 4850863 4203 0 0 0 0 0 0 54722 619 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 br0: 10508 212 0 212 0 0 0 212 61369558 958857 0 0 0 0 0 0 whereas before it looked like this: root@debian:~# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 13160 164 0 0 0 0 0 0 13160 164 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 30824 268 0 0 0 0 0 0 3332 37 0 0 0 0 0 0 swp0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 30824 268 0 0 0 0 0 0 2428 27 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 29752 268 0 0 0 0 0 0 1564 17 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The reason why the ifstat shipped by Debian (v1.1, with a Debian patch upgrading it to 1.1-8.1 at the time of writing) is broken is because its "proc" driver/backend parses the header very literally: main/drivers.c#L825 if (!data->checked && strncmp(buf, "Inter-|", 7)) goto badproc; and there's no way in which the header can be changed such that programs parsing like that would not get broken. Even if we fix this ancient and very "lightly" maintained program to parse the text output of /proc/net/dev in a more sensible way, this story seems bound to repeat again with other programs, and modifying them all could cause more trouble than it's worth. On the other hand, the reverted patch had no other reason than an aesthetic one, so reverting it is the simplest way out. I don't know what other distributions would be affected; the fact that Debian doesn't ship the iproute2 version of the program (a different code base altogether, which uses netlink and not /proc/net/dev) is surprising in itself. Fixes: ec18e8455484 ("net: procfs: add seq_puts() statement for dev_mcast") Link: https://lore.kernel.org/netdev/20211009163511.vayjvtn3rrteglsu@skbuf/ Cc: Yajun Deng Cc: Matthieu Baerts Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20211013001909.3164185-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- net/core/net-procfs.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/net/core/net-procfs.c b/net/core/net-procfs.c index eab5fc88a002..d8b9dbabd4a4 100644 --- a/net/core/net-procfs.c +++ b/net/core/net-procfs.c @@ -77,8 +77,8 @@ static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) struct rtnl_link_stats64 temp; const struct rtnl_link_stats64 *stats = dev_get_stats(dev, &temp); - seq_printf(seq, "%9s: %16llu %12llu %4llu %6llu %4llu %5llu %10llu %9llu " - "%16llu %12llu %4llu %6llu %4llu %5llu %7llu %10llu\n", + seq_printf(seq, "%6s: %7llu %7llu %4llu %4llu %4llu %5llu %10llu %9llu " + "%8llu %7llu %4llu %4llu %4llu %5llu %7llu %10llu\n", dev->name, stats->rx_bytes, stats->rx_packets, stats->rx_errors, stats->rx_dropped + stats->rx_missed_errors, @@ -103,11 +103,11 @@ static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) static int dev_seq_show(struct seq_file *seq, void *v) { if (v == SEQ_START_TOKEN) - seq_puts(seq, "Interface| Receive " - " | Transmit\n" - " | bytes packets errs drop fifo frame " - "compressed multicast| bytes packets errs " - " drop fifo colls carrier compressed\n"); + seq_puts(seq, "Inter-| Receive " + " | Transmit\n" + " face |bytes packets errs drop fifo frame " + "compressed multicast|bytes packets errs " + "drop fifo colls carrier compressed\n"); else dev_seq_printf_stats(seq, v); return 0; @@ -259,14 +259,14 @@ static int ptype_seq_show(struct seq_file *seq, void *v) struct packet_type *pt = v; if (v == SEQ_START_TOKEN) - seq_puts(seq, "Type Device Function\n"); + seq_puts(seq, "Type Device Function\n"); else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) { if (pt->type == htons(ETH_P_ALL)) seq_puts(seq, "ALL "); else seq_printf(seq, "%04x", ntohs(pt->type)); - seq_printf(seq, " %-9s %ps\n", + seq_printf(seq, " %-8s %ps\n", pt->dev ? pt->dev->name : "", pt->func); } @@ -327,14 +327,12 @@ static int dev_mc_seq_show(struct seq_file *seq, void *v) struct netdev_hw_addr *ha; struct net_device *dev = v; - if (v == SEQ_START_TOKEN) { - seq_puts(seq, "Ifindex Interface Refcount Global_use Address\n"); + if (v == SEQ_START_TOKEN) return 0; - } netif_addr_lock_bh(dev); netdev_for_each_mc_addr(ha, dev) { - seq_printf(seq, "%-7d %-9s %-8d %-10d %*phN\n", + seq_printf(seq, "%-4d %-15s %-5d %-5d %*phN\n", dev->ifindex, dev->name, ha->refcount, ha->global_use, (int)dev->addr_len, ha->addr); -- cgit v1.2.3 From 0911ab31896f0e908540746414a77dd63912748d Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Wed, 13 Oct 2021 11:49:32 +0800 Subject: nfc: fix error handling of nfc_proto_register() When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case. Fixes: c7fe3b52c128 ("NFC: add NFC socket family") Signed-off-by: Ziyang Xuan Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski --- net/nfc/af_nfc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/nfc/af_nfc.c b/net/nfc/af_nfc.c index 6024fad905ff..dda323e0a473 100644 --- a/net/nfc/af_nfc.c +++ b/net/nfc/af_nfc.c @@ -60,6 +60,9 @@ int nfc_proto_register(const struct nfc_protocol *nfc_proto) proto_tab[nfc_proto->id] = nfc_proto; write_unlock(&proto_tab_lock); + if (rc) + proto_unregister(nfc_proto->proto); + return rc; } EXPORT_SYMBOL(nfc_proto_register); -- cgit v1.2.3 From 58e7dcc9ca29c14e44267a4d0ea61e3229124907 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Wed, 13 Oct 2021 15:50:12 +0800 Subject: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. Fixes: 1c7a4c24fbfd ("NFC Digital: Add target NFC-DEP support") Signed-off-by: Ziyang Xuan Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski --- net/nfc/digital_core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/nfc/digital_core.c b/net/nfc/digital_core.c index fefc03674f4f..d63d2e5dc60c 100644 --- a/net/nfc/digital_core.c +++ b/net/nfc/digital_core.c @@ -277,6 +277,7 @@ int digital_tg_configure_hw(struct nfc_digital_dev *ddev, int type, int param) static int digital_tg_listen_mdaa(struct nfc_digital_dev *ddev, u8 rf_tech) { struct digital_tg_mdaa_params *params; + int rc; params = kzalloc(sizeof(*params), GFP_KERNEL); if (!params) @@ -291,8 +292,12 @@ static int digital_tg_listen_mdaa(struct nfc_digital_dev *ddev, u8 rf_tech) get_random_bytes(params->nfcid2 + 2, NFC_NFCID2_MAXSIZE - 2); params->sc = DIGITAL_SENSF_FELICA_SC; - return digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params, - 500, digital_tg_recv_atr_req, NULL); + rc = digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params, + 500, digital_tg_recv_atr_req, NULL); + if (rc) + kfree(params); + + return rc; } static int digital_tg_listen_md(struct nfc_digital_dev *ddev, u8 rf_tech) -- cgit v1.2.3 From 291c932fc3692e4d211a445ba8aa35663831bac7 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Wed, 13 Oct 2021 15:50:32 +0800 Subject: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. Fixes: 2c66daecc409 ("NFC Digital: Add NFC-A technology support") Signed-off-by: Ziyang Xuan Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski --- net/nfc/digital_technology.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/nfc/digital_technology.c b/net/nfc/digital_technology.c index 84d2345c75a3..3adf4589852a 100644 --- a/net/nfc/digital_technology.c +++ b/net/nfc/digital_technology.c @@ -465,8 +465,12 @@ static int digital_in_send_sdd_req(struct nfc_digital_dev *ddev, skb_put_u8(skb, sel_cmd); skb_put_u8(skb, DIGITAL_SDD_REQ_SEL_PAR); - return digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res, - target); + rc = digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res, + target); + if (rc) + kfree_skb(skb); + + return rc; } static void digital_in_recv_sens_res(struct nfc_digital_dev *ddev, void *arg, -- cgit v1.2.3 From 776c75010803849c1cc4f11031a2b3960ab05202 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Wed, 13 Oct 2021 14:16:31 +0800 Subject: ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() I got a null-ptr-deref report: KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] ... RIP: 0010:regulator_enable+0x84/0x260 ... Call Trace: ahci_platform_enable_regulators+0xae/0x320 ahci_platform_enable_resources+0x1a/0x120 ahci_probe+0x4f/0x1b9 platform_probe+0x10b/0x280 ... entry_SYSCALL_64_after_hwframe+0x44/0xae If devm_regulator_get() in ahci_platform_get_resources() fails, hpriv->phy_regulator will point to NULL, when enabling or disabling it, null-ptr-deref will occur. ahci_probe() ahci_platform_get_resources() devm_regulator_get(, "phy") // failed, let phy_regulator = NULL ahci_platform_enable_resources() ahci_platform_enable_regulators() regulator_enable(hpriv->phy_regulator) // null-ptr-deref commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") replaces devm_regulator_get_optional() with devm_regulator_get(), but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI. Delete it like AHCI regulator to fix this bug. Fixes: commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") Reported-by: Hulk Robot Signed-off-by: Wang Hai Reviewed-by: Hans de Goede Signed-off-by: Damien Le Moal --- drivers/ata/libahci_platform.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index b2f552088291..0910441321f7 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -440,10 +440,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, hpriv->phy_regulator = devm_regulator_get(dev, "phy"); if (IS_ERR(hpriv->phy_regulator)) { rc = PTR_ERR(hpriv->phy_regulator); - if (rc == -EPROBE_DEFER) - goto err_out; - rc = 0; - hpriv->phy_regulator = NULL; + goto err_out; } if (flags & AHCI_PLATFORM_GET_RESETS) { -- cgit v1.2.3 From f7db8fd03a4bc5baf70ccf8978fe17cb54368b97 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 8 Oct 2021 07:31:03 +0900 Subject: ksmbd: add validation in smb2_ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add validation for request/response buffer size check in smb2_ioctl and fsctl_copychunk() take copychunk_ioctl_req pointer and the other arguments instead of smb2_ioctl_req structure and remove an unused smb2_ioctl_req argument of fsctl_validate_negotiate_info. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Cc: Sergey Senozhatsky Acked-by: Hyunchul Lee Signed-off-by: Colin Ian King Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 113 +++++++++++++++++++++++++++++++++++++++-------------- fs/ksmbd/vfs.c | 2 +- fs/ksmbd/vfs.h | 2 +- 3 files changed, 86 insertions(+), 31 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 005aa93a49d6..1c7b837c8106 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -7023,24 +7023,26 @@ out2: return err; } -static int fsctl_copychunk(struct ksmbd_work *work, struct smb2_ioctl_req *req, +static int fsctl_copychunk(struct ksmbd_work *work, + struct copychunk_ioctl_req *ci_req, + unsigned int cnt_code, + unsigned int input_count, + unsigned long long volatile_id, + unsigned long long persistent_id, struct smb2_ioctl_rsp *rsp) { - struct copychunk_ioctl_req *ci_req; struct copychunk_ioctl_rsp *ci_rsp; struct ksmbd_file *src_fp = NULL, *dst_fp = NULL; struct srv_copychunk *chunks; unsigned int i, chunk_count, chunk_count_written = 0; unsigned int chunk_size_written = 0; loff_t total_size_written = 0; - int ret, cnt_code; + int ret = 0; - cnt_code = le32_to_cpu(req->CntCode); - ci_req = (struct copychunk_ioctl_req *)&req->Buffer[0]; ci_rsp = (struct copychunk_ioctl_rsp *)&rsp->Buffer[0]; - rsp->VolatileFileId = req->VolatileFileId; - rsp->PersistentFileId = req->PersistentFileId; + rsp->VolatileFileId = cpu_to_le64(volatile_id); + rsp->PersistentFileId = cpu_to_le64(persistent_id); ci_rsp->ChunksWritten = cpu_to_le32(ksmbd_server_side_copy_max_chunk_count()); ci_rsp->ChunkBytesWritten = @@ -7050,12 +7052,13 @@ static int fsctl_copychunk(struct ksmbd_work *work, struct smb2_ioctl_req *req, chunks = (struct srv_copychunk *)&ci_req->Chunks[0]; chunk_count = le32_to_cpu(ci_req->ChunkCount); + if (chunk_count == 0) + goto out; total_size_written = 0; /* verify the SRV_COPYCHUNK_COPY packet */ if (chunk_count > ksmbd_server_side_copy_max_chunk_count() || - le32_to_cpu(req->InputCount) < - offsetof(struct copychunk_ioctl_req, Chunks) + + input_count < offsetof(struct copychunk_ioctl_req, Chunks) + chunk_count * sizeof(struct srv_copychunk)) { rsp->hdr.Status = STATUS_INVALID_PARAMETER; return -EINVAL; @@ -7076,9 +7079,7 @@ static int fsctl_copychunk(struct ksmbd_work *work, struct smb2_ioctl_req *req, src_fp = ksmbd_lookup_foreign_fd(work, le64_to_cpu(ci_req->ResumeKey[0])); - dst_fp = ksmbd_lookup_fd_slow(work, - le64_to_cpu(req->VolatileFileId), - le64_to_cpu(req->PersistentFileId)); + dst_fp = ksmbd_lookup_fd_slow(work, volatile_id, persistent_id); ret = -EINVAL; if (!src_fp || src_fp->persistent_id != le64_to_cpu(ci_req->ResumeKey[1])) { @@ -7153,8 +7154,8 @@ static __be32 idev_ipv4_address(struct in_device *idev) } static int fsctl_query_iface_info_ioctl(struct ksmbd_conn *conn, - struct smb2_ioctl_req *req, - struct smb2_ioctl_rsp *rsp) + struct smb2_ioctl_rsp *rsp, + unsigned int out_buf_len) { struct network_interface_info_ioctl_rsp *nii_rsp = NULL; int nbytes = 0; @@ -7166,6 +7167,12 @@ static int fsctl_query_iface_info_ioctl(struct ksmbd_conn *conn, rtnl_lock(); for_each_netdev(&init_net, netdev) { + if (out_buf_len < + nbytes + sizeof(struct network_interface_info_ioctl_rsp)) { + rtnl_unlock(); + return -ENOSPC; + } + if (netdev->type == ARPHRD_LOOPBACK) continue; @@ -7245,11 +7252,6 @@ static int fsctl_query_iface_info_ioctl(struct ksmbd_conn *conn, if (nii_rsp) nii_rsp->Next = 0; - if (!nbytes) { - rsp->hdr.Status = STATUS_BUFFER_TOO_SMALL; - return -EINVAL; - } - rsp->PersistentFileId = cpu_to_le64(SMB2_NO_FID); rsp->VolatileFileId = cpu_to_le64(SMB2_NO_FID); return nbytes; @@ -7257,11 +7259,16 @@ static int fsctl_query_iface_info_ioctl(struct ksmbd_conn *conn, static int fsctl_validate_negotiate_info(struct ksmbd_conn *conn, struct validate_negotiate_info_req *neg_req, - struct validate_negotiate_info_rsp *neg_rsp) + struct validate_negotiate_info_rsp *neg_rsp, + unsigned int in_buf_len) { int ret = 0; int dialect; + if (in_buf_len < sizeof(struct validate_negotiate_info_req) + + le16_to_cpu(neg_req->DialectCount) * sizeof(__le16)) + return -EINVAL; + dialect = ksmbd_lookup_dialect_by_id(neg_req->Dialects, neg_req->DialectCount); if (dialect == BAD_PROT_ID || dialect != conn->dialect) { @@ -7295,7 +7302,7 @@ err_out: static int fsctl_query_allocated_ranges(struct ksmbd_work *work, u64 id, struct file_allocated_range_buffer *qar_req, struct file_allocated_range_buffer *qar_rsp, - int in_count, int *out_count) + unsigned int in_count, unsigned int *out_count) { struct ksmbd_file *fp; loff_t start, length; @@ -7322,7 +7329,8 @@ static int fsctl_query_allocated_ranges(struct ksmbd_work *work, u64 id, } static int fsctl_pipe_transceive(struct ksmbd_work *work, u64 id, - int out_buf_len, struct smb2_ioctl_req *req, + unsigned int out_buf_len, + struct smb2_ioctl_req *req, struct smb2_ioctl_rsp *rsp) { struct ksmbd_rpc_command *rpc_resp; @@ -7436,8 +7444,7 @@ int smb2_ioctl(struct ksmbd_work *work) { struct smb2_ioctl_req *req; struct smb2_ioctl_rsp *rsp, *rsp_org; - int cnt_code, nbytes = 0; - int out_buf_len; + unsigned int cnt_code, nbytes = 0, out_buf_len, in_buf_len; u64 id = KSMBD_NO_FID; struct ksmbd_conn *conn = work->conn; int ret = 0; @@ -7466,7 +7473,11 @@ int smb2_ioctl(struct ksmbd_work *work) cnt_code = le32_to_cpu(req->CntCode); out_buf_len = le32_to_cpu(req->MaxOutputResponse); - out_buf_len = min(KSMBD_IPC_MAX_PAYLOAD, out_buf_len); + out_buf_len = + min_t(u32, work->response_sz - work->next_smb2_rsp_hdr_off - + (offsetof(struct smb2_ioctl_rsp, Buffer) - 4), + out_buf_len); + in_buf_len = le32_to_cpu(req->InputCount); switch (cnt_code) { case FSCTL_DFS_GET_REFERRALS: @@ -7494,6 +7505,7 @@ int smb2_ioctl(struct ksmbd_work *work) break; } case FSCTL_PIPE_TRANSCEIVE: + out_buf_len = min_t(u32, KSMBD_IPC_MAX_PAYLOAD, out_buf_len); nbytes = fsctl_pipe_transceive(work, id, out_buf_len, req, rsp); break; case FSCTL_VALIDATE_NEGOTIATE_INFO: @@ -7502,9 +7514,16 @@ int smb2_ioctl(struct ksmbd_work *work) goto out; } + if (in_buf_len < sizeof(struct validate_negotiate_info_req)) + return -EINVAL; + + if (out_buf_len < sizeof(struct validate_negotiate_info_rsp)) + return -EINVAL; + ret = fsctl_validate_negotiate_info(conn, (struct validate_negotiate_info_req *)&req->Buffer[0], - (struct validate_negotiate_info_rsp *)&rsp->Buffer[0]); + (struct validate_negotiate_info_rsp *)&rsp->Buffer[0], + in_buf_len); if (ret < 0) goto out; @@ -7513,9 +7532,10 @@ int smb2_ioctl(struct ksmbd_work *work) rsp->VolatileFileId = cpu_to_le64(SMB2_NO_FID); break; case FSCTL_QUERY_NETWORK_INTERFACE_INFO: - nbytes = fsctl_query_iface_info_ioctl(conn, req, rsp); - if (nbytes < 0) + ret = fsctl_query_iface_info_ioctl(conn, rsp, out_buf_len); + if (ret < 0) goto out; + nbytes = ret; break; case FSCTL_REQUEST_RESUME_KEY: if (out_buf_len < sizeof(struct resume_key_ioctl_rsp)) { @@ -7540,15 +7560,33 @@ int smb2_ioctl(struct ksmbd_work *work) goto out; } + if (in_buf_len < sizeof(struct copychunk_ioctl_req)) { + ret = -EINVAL; + goto out; + } + if (out_buf_len < sizeof(struct copychunk_ioctl_rsp)) { ret = -EINVAL; goto out; } nbytes = sizeof(struct copychunk_ioctl_rsp); - fsctl_copychunk(work, req, rsp); + rsp->VolatileFileId = req->VolatileFileId; + rsp->PersistentFileId = req->PersistentFileId; + fsctl_copychunk(work, + (struct copychunk_ioctl_req *)&req->Buffer[0], + le32_to_cpu(req->CntCode), + le32_to_cpu(req->InputCount), + le64_to_cpu(req->VolatileFileId), + le64_to_cpu(req->PersistentFileId), + rsp); break; case FSCTL_SET_SPARSE: + if (in_buf_len < sizeof(struct file_sparse)) { + ret = -EINVAL; + goto out; + } + ret = fsctl_set_sparse(work, id, (struct file_sparse *)&req->Buffer[0]); if (ret < 0) @@ -7567,6 +7605,11 @@ int smb2_ioctl(struct ksmbd_work *work) goto out; } + if (in_buf_len < sizeof(struct file_zero_data_information)) { + ret = -EINVAL; + goto out; + } + zero_data = (struct file_zero_data_information *)&req->Buffer[0]; @@ -7586,6 +7629,11 @@ int smb2_ioctl(struct ksmbd_work *work) break; } case FSCTL_QUERY_ALLOCATED_RANGES: + if (in_buf_len < sizeof(struct file_allocated_range_buffer)) { + ret = -EINVAL; + goto out; + } + ret = fsctl_query_allocated_ranges(work, id, (struct file_allocated_range_buffer *)&req->Buffer[0], (struct file_allocated_range_buffer *)&rsp->Buffer[0], @@ -7626,6 +7674,11 @@ int smb2_ioctl(struct ksmbd_work *work) struct duplicate_extents_to_file *dup_ext; loff_t src_off, dst_off, length, cloned; + if (in_buf_len < sizeof(struct duplicate_extents_to_file)) { + ret = -EINVAL; + goto out; + } + dup_ext = (struct duplicate_extents_to_file *)&req->Buffer[0]; fp_in = ksmbd_lookup_fd_slow(work, dup_ext->VolatileFileHandle, @@ -7696,6 +7749,8 @@ out: rsp->hdr.Status = STATUS_OBJECT_NAME_NOT_FOUND; else if (ret == -EOPNOTSUPP) rsp->hdr.Status = STATUS_NOT_SUPPORTED; + else if (ret == -ENOSPC) + rsp->hdr.Status = STATUS_BUFFER_TOO_SMALL; else if (ret < 0 || rsp->hdr.Status == 0) rsp->hdr.Status = STATUS_INVALID_PARAMETER; smb2_set_err_rsp(work); diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c index b41954294d38..835b384b0895 100644 --- a/fs/ksmbd/vfs.c +++ b/fs/ksmbd/vfs.c @@ -1023,7 +1023,7 @@ int ksmbd_vfs_zero_data(struct ksmbd_work *work, struct ksmbd_file *fp, int ksmbd_vfs_fqar_lseek(struct ksmbd_file *fp, loff_t start, loff_t length, struct file_allocated_range_buffer *ranges, - int in_count, int *out_count) + unsigned int in_count, unsigned int *out_count) { struct file *f = fp->filp; struct inode *inode = file_inode(fp->filp); diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h index 7b1dcaa3fbdc..b0d5b8feb4a3 100644 --- a/fs/ksmbd/vfs.h +++ b/fs/ksmbd/vfs.h @@ -166,7 +166,7 @@ int ksmbd_vfs_zero_data(struct ksmbd_work *work, struct ksmbd_file *fp, struct file_allocated_range_buffer; int ksmbd_vfs_fqar_lseek(struct ksmbd_file *fp, loff_t start, loff_t length, struct file_allocated_range_buffer *ranges, - int in_count, int *out_count); + unsigned int in_count, unsigned int *out_count); int ksmbd_vfs_unlink(struct user_namespace *user_ns, struct dentry *dir, struct dentry *dentry); void *ksmbd_vfs_init_kstat(char **p, struct ksmbd_kstat *ksmbd_kstat); -- cgit v1.2.3 From bf8acc9e10e21c28452dfa067a7d31e6067104b1 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Thu, 7 Oct 2021 16:26:58 +0900 Subject: ksmbd: improve credits management * Requests except READ, WRITE, IOCTL, INFO, QUERY DIRECOTRY, CANCEL must consume one credit. * If client's granted credits are insufficient, refuse to handle requests. * Windows server 2016 or later grant up to 8192 credits to clients at once. Acked-by: Namjae Jeon Signed-off-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/connection.c | 2 ++ fs/ksmbd/smb2misc.c | 38 +++++++++++++++++------- fs/ksmbd/smb2pdu.c | 81 ++++++++++++++++++--------------------------------- 3 files changed, 59 insertions(+), 62 deletions(-) diff --git a/fs/ksmbd/connection.c b/fs/ksmbd/connection.c index 48b18b4ec117..b57a0d8a392f 100644 --- a/fs/ksmbd/connection.c +++ b/fs/ksmbd/connection.c @@ -61,6 +61,8 @@ struct ksmbd_conn *ksmbd_conn_alloc(void) conn->local_nls = load_nls_default(); atomic_set(&conn->req_running, 0); atomic_set(&conn->r_count, 0); + conn->total_credits = 1; + init_waitqueue_head(&conn->req_running_q); INIT_LIST_HEAD(&conn->conns_list); INIT_LIST_HEAD(&conn->sessions); diff --git a/fs/ksmbd/smb2misc.c b/fs/ksmbd/smb2misc.c index 9edd9c161b27..e7e441c8f050 100644 --- a/fs/ksmbd/smb2misc.c +++ b/fs/ksmbd/smb2misc.c @@ -284,11 +284,13 @@ static inline int smb2_ioctl_resp_len(struct smb2_ioctl_req *h) le32_to_cpu(h->MaxOutputResponse); } -static int smb2_validate_credit_charge(struct smb2_hdr *hdr) +static int smb2_validate_credit_charge(struct ksmbd_conn *conn, + struct smb2_hdr *hdr) { - int req_len = 0, expect_resp_len = 0, calc_credit_num, max_len; - int credit_charge = le16_to_cpu(hdr->CreditCharge); + unsigned int req_len = 0, expect_resp_len = 0, calc_credit_num, max_len; + unsigned short credit_charge = le16_to_cpu(hdr->CreditCharge); void *__hdr = hdr; + int ret; switch (hdr->Command) { case SMB2_QUERY_INFO: @@ -310,21 +312,37 @@ static int smb2_validate_credit_charge(struct smb2_hdr *hdr) req_len = smb2_ioctl_req_len(__hdr); expect_resp_len = smb2_ioctl_resp_len(__hdr); break; - default: + case SMB2_CANCEL: return 0; + default: + req_len = 1; + break; } - credit_charge = max(1, credit_charge); - max_len = max(req_len, expect_resp_len); + credit_charge = max_t(unsigned short, credit_charge, 1); + max_len = max_t(unsigned int, req_len, expect_resp_len); calc_credit_num = DIV_ROUND_UP(max_len, SMB2_MAX_BUFFER_SIZE); if (credit_charge < calc_credit_num) { - pr_err("Insufficient credit charge, given: %d, needed: %d\n", - credit_charge, calc_credit_num); + ksmbd_debug(SMB, "Insufficient credit charge, given: %d, needed: %d\n", + credit_charge, calc_credit_num); + return 1; + } else if (credit_charge > conn->max_credits) { + ksmbd_debug(SMB, "Too large credit charge: %d\n", credit_charge); return 1; } - return 0; + spin_lock(&conn->credits_lock); + if (credit_charge <= conn->total_credits) { + conn->total_credits -= credit_charge; + ret = 0; + } else { + ksmbd_debug(SMB, "Insufficient credits granted, given: %u, granted: %u\n", + credit_charge, conn->total_credits); + ret = 1; + } + spin_unlock(&conn->credits_lock); + return ret; } int ksmbd_smb2_check_message(struct ksmbd_work *work) @@ -383,7 +401,7 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) } if ((work->conn->vals->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU) && - smb2_validate_credit_charge(hdr)) { + smb2_validate_credit_charge(work->conn, hdr)) { work->conn->ops->set_rsp_status(work, STATUS_INVALID_PARAMETER); return 1; } diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 1c7b837c8106..79b296abe04e 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -292,22 +292,6 @@ int init_smb2_neg_rsp(struct ksmbd_work *work) return 0; } -static int smb2_consume_credit_charge(struct ksmbd_work *work, - unsigned short credit_charge) -{ - struct ksmbd_conn *conn = work->conn; - unsigned int rsp_credits = 1; - - if (!conn->total_credits) - return 0; - - if (credit_charge > 0) - rsp_credits = credit_charge; - - conn->total_credits -= rsp_credits; - return rsp_credits; -} - /** * smb2_set_rsp_credits() - set number of credits in response buffer * @work: smb work containing smb response buffer @@ -317,49 +301,43 @@ int smb2_set_rsp_credits(struct ksmbd_work *work) struct smb2_hdr *req_hdr = ksmbd_req_buf_next(work); struct smb2_hdr *hdr = ksmbd_resp_buf_next(work); struct ksmbd_conn *conn = work->conn; - unsigned short credits_requested = le16_to_cpu(req_hdr->CreditRequest); - unsigned short credit_charge = 1, credits_granted = 0; - unsigned short aux_max, aux_credits, min_credits; - int rsp_credit_charge; + unsigned short credits_requested; + unsigned short credit_charge, credits_granted = 0; + unsigned short aux_max, aux_credits; - if (hdr->Command == SMB2_CANCEL) - goto out; + if (work->send_no_response) + return 0; - /* get default minimum credits by shifting maximum credits by 4 */ - min_credits = conn->max_credits >> 4; + hdr->CreditCharge = req_hdr->CreditCharge; - if (conn->total_credits >= conn->max_credits) { + if (conn->total_credits > conn->max_credits) { + hdr->CreditRequest = 0; pr_err("Total credits overflow: %d\n", conn->total_credits); - conn->total_credits = min_credits; - } - - rsp_credit_charge = - smb2_consume_credit_charge(work, le16_to_cpu(req_hdr->CreditCharge)); - if (rsp_credit_charge < 0) return -EINVAL; + } - hdr->CreditCharge = cpu_to_le16(rsp_credit_charge); + credit_charge = max_t(unsigned short, + le16_to_cpu(req_hdr->CreditCharge), 1); + credits_requested = max_t(unsigned short, + le16_to_cpu(req_hdr->CreditRequest), 1); - if (credits_requested > 0) { - aux_credits = credits_requested - 1; - aux_max = 32; - if (hdr->Command == SMB2_NEGOTIATE) - aux_max = 0; - aux_credits = (aux_credits < aux_max) ? aux_credits : aux_max; - credits_granted = aux_credits + credit_charge; + /* according to smb2.credits smbtorture, Windows server + * 2016 or later grant up to 8192 credits at once. + * + * TODO: Need to adjuct CreditRequest value according to + * current cpu load + */ + aux_credits = credits_requested - 1; + if (hdr->Command == SMB2_NEGOTIATE) + aux_max = 0; + else + aux_max = conn->max_credits - credit_charge; + aux_credits = min_t(unsigned short, aux_credits, aux_max); + credits_granted = credit_charge + aux_credits; - /* if credits granted per client is getting bigger than default - * minimum credits then we should wrap it up within the limits. - */ - if ((conn->total_credits + credits_granted) > min_credits) - credits_granted = min_credits - conn->total_credits; - /* - * TODO: Need to adjuct CreditRequest value according to - * current cpu load - */ - } else if (conn->total_credits == 0) { - credits_granted = 1; - } + if (conn->max_credits - conn->total_credits < credits_granted) + credits_granted = conn->max_credits - + conn->total_credits; conn->total_credits += credits_granted; work->credits_granted += credits_granted; @@ -368,7 +346,6 @@ int smb2_set_rsp_credits(struct ksmbd_work *work) /* Update CreditRequest in last request */ hdr->CreditRequest = cpu_to_le16(work->credits_granted); } -out: ksmbd_debug(SMB, "credits: requested[%d] granted[%d] total_granted[%d]\n", credits_requested, credits_granted, -- cgit v1.2.3 From 9a63b999ae5435d82a5c353c6b1467100f857742 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 11 Oct 2021 12:48:31 +0900 Subject: ksmbd: fix potencial 32bit overflow from data area check in smb2_write DataOffset and Length validation can be potencial 32bit overflow. This patch fix it. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 79b296abe04e..7b4689f2df49 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -6197,8 +6197,7 @@ static noinline int smb2_write_pipe(struct ksmbd_work *work) (offsetof(struct smb2_write_req, Buffer) - 4)) { data_buf = (char *)&req->Buffer[0]; } else { - if ((le16_to_cpu(req->DataOffset) > get_rfc1002_len(req)) || - (le16_to_cpu(req->DataOffset) + length > get_rfc1002_len(req))) { + if ((u64)le16_to_cpu(req->DataOffset) + length > get_rfc1002_len(req)) { pr_err("invalid write data offset %u, smb_len %u\n", le16_to_cpu(req->DataOffset), get_rfc1002_len(req)); @@ -6356,8 +6355,7 @@ int smb2_write(struct ksmbd_work *work) (offsetof(struct smb2_write_req, Buffer) - 4)) { data_buf = (char *)&req->Buffer[0]; } else { - if ((le16_to_cpu(req->DataOffset) > get_rfc1002_len(req)) || - (le16_to_cpu(req->DataOffset) + length > get_rfc1002_len(req))) { + if ((u64)le16_to_cpu(req->DataOffset) + length > get_rfc1002_len(req)) { pr_err("invalid write data offset %u, smb_len %u\n", le16_to_cpu(req->DataOffset), get_rfc1002_len(req)); -- cgit v1.2.3 From dbad63001eac3abeeb2b66ddf71504e8ab128c5c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 11 Oct 2021 19:15:25 +0900 Subject: ksmbd: validate compound response buffer Add the check to validate compound response buffer. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 7b4689f2df49..89c187aa8db2 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -449,6 +449,12 @@ bool is_chained_smb2_message(struct ksmbd_work *work) return false; } + if ((u64)get_rfc1002_len(work->response_buf) + MAX_CIFS_SMALL_BUFFER_SIZE > + work->response_sz) { + pr_err("next response offset exceeds response buffer size\n"); + return false; + } + ksmbd_debug(SMB, "got SMB2 chained command\n"); init_chained_smb2_rsp(work); return true; -- cgit v1.2.3 From be5eb933542629ad6a7d4c92097b1b472b1612d0 Mon Sep 17 00:00:00 2001 From: Adam Manzanares Date: Wed, 13 Oct 2021 15:04:19 +0000 Subject: nvme: fix per-namespace chardev deletion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev") Reported-by: Yi Zhang Suggested-by: Sagi Grimberg Signed-off-by: Adam Manzanares Reviewed-by: Javier González Tested-by: Yi Zhang Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 21 ++++++++++++--------- drivers/nvme/host/multipath.c | 2 -- 2 files changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e486845d2c7e..587385bc82b6 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3548,10 +3548,15 @@ static int __nvme_check_ids(struct nvme_subsystem *subsys, return 0; } +static void nvme_cdev_rel(struct device *dev) +{ + ida_simple_remove(&nvme_ns_chr_minor_ida, MINOR(dev->devt)); +} + void nvme_cdev_del(struct cdev *cdev, struct device *cdev_device) { cdev_device_del(cdev, cdev_device); - ida_simple_remove(&nvme_ns_chr_minor_ida, MINOR(cdev_device->devt)); + put_device(cdev_device); } int nvme_cdev_add(struct cdev *cdev, struct device *cdev_device, @@ -3564,14 +3569,14 @@ int nvme_cdev_add(struct cdev *cdev, struct device *cdev_device, return minor; cdev_device->devt = MKDEV(MAJOR(nvme_ns_chr_devt), minor); cdev_device->class = nvme_ns_chr_class; + cdev_device->release = nvme_cdev_rel; device_initialize(cdev_device); cdev_init(cdev, fops); cdev->owner = owner; ret = cdev_device_add(cdev, cdev_device); - if (ret) { + if (ret) put_device(cdev_device); - ida_simple_remove(&nvme_ns_chr_minor_ida, minor); - } + return ret; } @@ -3603,11 +3608,9 @@ static int nvme_add_ns_cdev(struct nvme_ns *ns) ns->ctrl->instance, ns->head->instance); if (ret) return ret; - ret = nvme_cdev_add(&ns->cdev, &ns->cdev_device, &nvme_ns_chr_fops, - ns->ctrl->ops->module); - if (ret) - kfree_const(ns->cdev_device.kobj.name); - return ret; + + return nvme_cdev_add(&ns->cdev, &ns->cdev_device, &nvme_ns_chr_fops, + ns->ctrl->ops->module); } static struct nvme_ns_head *nvme_alloc_ns_head(struct nvme_ctrl *ctrl, diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index e8ccdd398f78..fba06618c6c2 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -431,8 +431,6 @@ static int nvme_add_ns_head_cdev(struct nvme_ns_head *head) return ret; ret = nvme_cdev_add(&head->cdev, &head->cdev_device, &nvme_ns_head_chr_fops, THIS_MODULE); - if (ret) - kfree_const(head->cdev_device.kobj.name); return ret; } -- cgit v1.2.3 From d9b7748ffc45250b4d7bcf22404383229bc495f5 Mon Sep 17 00:00:00 2001 From: Hans Potsch Date: Wed, 6 Oct 2021 14:13:32 +0200 Subject: EDAC/armada-xp: Fix output of uncorrectable error counter The number of correctable errors is displayed as uncorrectable errors because the "SBE" error count is passed to both calls of edac_mc_handle_error(). Pass the correct uncorrectable error count to the second edac_mc_handle_error() call when logging uncorrectable errors. [ bp: Massage commit message. ] Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC") Signed-off-by: Hans Potsch Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com --- drivers/edac/armada_xp_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/armada_xp_edac.c b/drivers/edac/armada_xp_edac.c index e3e757513d1b..b1f46a974b9e 100644 --- a/drivers/edac/armada_xp_edac.c +++ b/drivers/edac/armada_xp_edac.c @@ -178,7 +178,7 @@ static void axp_mc_check(struct mem_ctl_info *mci) "details unavailable (multiple errors)"); if (cnt_dbe) edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, - cnt_sbe, /* error count */ + cnt_dbe, /* error count */ 0, 0, 0, /* pfn, offset, syndrome */ -1, -1, -1, /* top, mid, low layer */ mci->ctl_name, -- cgit v1.2.3 From 6098475d4cb48d821bdf453c61118c56e26294f0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 8 Oct 2021 14:31:57 +0100 Subject: spi: Fix deadlock when adding SPI controllers on SPI buses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. Reported-by: Uwe Kleine-König Signed-off-by: Mark Brown --- drivers/spi/spi.c | 17 ++++++----------- include/linux/spi/spi.h | 3 +++ 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index aea037c65985..412a10586233 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -478,12 +478,6 @@ static LIST_HEAD(spi_controller_list); */ static DEFINE_MUTEX(board_lock); -/* - * Prevents addition of devices with same chip select and - * addition of devices below an unregistering controller. - */ -static DEFINE_MUTEX(spi_add_lock); - /** * spi_alloc_device - Allocate a new SPI device * @ctlr: Controller to which device is connected @@ -636,9 +630,9 @@ int spi_add_device(struct spi_device *spi) * chipselect **BEFORE** we call setup(), else we'll trash * its configuration. Lock against concurrent add() calls. */ - mutex_lock(&spi_add_lock); + mutex_lock(&ctlr->add_lock); status = __spi_add_device(spi); - mutex_unlock(&spi_add_lock); + mutex_unlock(&ctlr->add_lock); return status; } EXPORT_SYMBOL_GPL(spi_add_device); @@ -658,7 +652,7 @@ static int spi_add_device_locked(struct spi_device *spi) /* Set the bus ID string */ spi_dev_set_name(spi); - WARN_ON(!mutex_is_locked(&spi_add_lock)); + WARN_ON(!mutex_is_locked(&ctlr->add_lock)); return __spi_add_device(spi); } @@ -2830,6 +2824,7 @@ int spi_register_controller(struct spi_controller *ctlr) spin_lock_init(&ctlr->bus_lock_spinlock); mutex_init(&ctlr->bus_lock_mutex); mutex_init(&ctlr->io_mutex); + mutex_init(&ctlr->add_lock); ctlr->bus_lock_flag = 0; init_completion(&ctlr->xfer_completion); if (!ctlr->max_dma_len) @@ -2966,7 +2961,7 @@ void spi_unregister_controller(struct spi_controller *ctlr) /* Prevent addition of new devices, unregister existing ones */ if (IS_ENABLED(CONFIG_SPI_DYNAMIC)) - mutex_lock(&spi_add_lock); + mutex_lock(&ctlr->add_lock); device_for_each_child(&ctlr->dev, NULL, __unregister); @@ -2997,7 +2992,7 @@ void spi_unregister_controller(struct spi_controller *ctlr) mutex_unlock(&board_lock); if (IS_ENABLED(CONFIG_SPI_DYNAMIC)) - mutex_unlock(&spi_add_lock); + mutex_unlock(&ctlr->add_lock); } EXPORT_SYMBOL_GPL(spi_unregister_controller); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 8371bca13729..6b0b686f6f90 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -531,6 +531,9 @@ struct spi_controller { /* I/O mutex */ struct mutex io_mutex; + /* Used to avoid adding the same CS twice */ + struct mutex add_lock; + /* lock and mutex for SPI bus locking */ spinlock_t bus_lock_spinlock; struct mutex bus_lock_mutex; -- cgit v1.2.3 From 16a8e2fbb2d49111004efc1c7342e083eafabeb0 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 13 Oct 2021 15:37:10 +0200 Subject: spi-mux: Fix false-positive lockdep splats MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls spi_setup() which results in a nested lock of io_mutex. add_lock is taken by spi_add_device(). The device_add() call in there can result in calling spi-mux's .probe() callback which registers its own spi controller which in turn results in spi_add_device() being called again. To fix this initialize the controller's locks already in spi_alloc_controller() to give spi_mux_probe() a chance to set the lockdep subclass. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown --- drivers/spi/spi-mux.c | 7 +++++++ drivers/spi/spi.c | 12 ++++++------ 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c index 9708b7827ff7..f5d32ec4634e 100644 --- a/drivers/spi/spi-mux.c +++ b/drivers/spi/spi-mux.c @@ -137,6 +137,13 @@ static int spi_mux_probe(struct spi_device *spi) priv = spi_controller_get_devdata(ctlr); priv->spi = spi; + /* + * Increase lockdep class as these lock are taken while the parent bus + * already holds their instance's lock. + */ + lockdep_set_subclass(&ctlr->io_mutex, 1); + lockdep_set_subclass(&ctlr->add_lock, 1); + priv->mux = devm_mux_control_get(&spi->dev, NULL); if (IS_ERR(priv->mux)) { ret = dev_err_probe(&spi->dev, PTR_ERR(priv->mux), diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 412a10586233..926b68aa45d3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2547,6 +2547,12 @@ struct spi_controller *__spi_alloc_controller(struct device *dev, return NULL; device_initialize(&ctlr->dev); + INIT_LIST_HEAD(&ctlr->queue); + spin_lock_init(&ctlr->queue_lock); + spin_lock_init(&ctlr->bus_lock_spinlock); + mutex_init(&ctlr->bus_lock_mutex); + mutex_init(&ctlr->io_mutex); + mutex_init(&ctlr->add_lock); ctlr->bus_num = -1; ctlr->num_chipselect = 1; ctlr->slave = slave; @@ -2819,12 +2825,6 @@ int spi_register_controller(struct spi_controller *ctlr) return id; ctlr->bus_num = id; } - INIT_LIST_HEAD(&ctlr->queue); - spin_lock_init(&ctlr->queue_lock); - spin_lock_init(&ctlr->bus_lock_spinlock); - mutex_init(&ctlr->bus_lock_mutex); - mutex_init(&ctlr->io_mutex); - mutex_init(&ctlr->add_lock); ctlr->bus_lock_flag = 0; init_completion(&ctlr->xfer_completion); if (!ctlr->max_dma_len) -- cgit v1.2.3 From 22390ce786c59328ccd13c329959dee1e8757487 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Oct 2021 13:17:50 +0200 Subject: ALSA: usb-audio: add Schiit Hel device to quirk table The Shciit Hel device responds to the ctl message for the mic capture switch with a timeout of -EPIPE: usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 This seems safe to ignore as the device works properly with the control message quirk, so add it to the quirk table so all is good. Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 889c855addfc..b8da4a08c458 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1884,6 +1884,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x2912, 0x30c8, /* Audioengine D1 */ QUIRK_FLAG_GET_SAMPLE_RATE), + DEVICE_FLG(0x30be, 0x0101, /* Schiit Hel */ + QUIRK_FLAG_IGNORE_CTL_ERROR), DEVICE_FLG(0x413c, 0xa506, /* Dell AE515 sound bar */ QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ -- cgit v1.2.3 From aef454b40288158b850aab13e3d2a8c406779401 Mon Sep 17 00:00:00 2001 From: Steven Clarkson Date: Thu, 14 Oct 2021 06:35:54 -0700 Subject: ALSA: hda/realtek: Add quirk for Clevo PC50HS Apply existing PCI quirk to the Clevo PC50HS and related models to fix audio output on the built in speakers. Signed-off-by: Steven Clarkson Cc: Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 22d27b12c4e7..1bbe22769ca9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2535,6 +2535,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x65d2, "Clevo PB51R[CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x65e1, "Clevo PB51[ED][DF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x65e5, "Clevo PC50D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x65f1, "Clevo PC50HS", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), -- cgit v1.2.3 From 26d6574109838b8fa40a8261421693015bab0579 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 12 Oct 2021 22:40:56 -0500 Subject: MAINTAINERS: Update entry for the Stratix10 firmware Richard Gong is no longer at Intel, so update the MAINTAINER's entry for the Stratix10 firmware drivers. Signed-off-by: Dinh Nguyen Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index e0bca0de0df7..6b6f98483deb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9629,7 +9629,7 @@ F: include/uapi/linux/isst_if.h F: tools/power/x86/intel-speed-select/ INTEL STRATIX10 FIRMWARE DRIVERS -M: Richard Gong +M: Dinh Nguyen L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu -- cgit v1.2.3 From 40507e7aada8422c38aafa0c8a1a09e4623c712a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 13 Oct 2021 16:35:49 +0200 Subject: ethernet: s2io: fix setting mac address during resume After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/neterion/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 09c0e839cca5..3b6b2e61139e 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -8566,7 +8566,7 @@ static void s2io_io_resume(struct pci_dev *pdev) return; } - if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) { + if (do_s2io_prog_unicast(netdev, netdev->dev_addr) == FAILURE) { s2io_card_down(sp); pr_err("Can't restore mac addr after reset.\n"); return; -- cgit v1.2.3 From 332fdf951df8b870e3da86b122ae304e2aabe88c Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 12 Oct 2021 20:49:55 +0300 Subject: mlxsw: thermal: Fix out-of-bounds memory accesses Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel Tested-by: Vadim Pasternak Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 52 +++------------------- 1 file changed, 5 insertions(+), 47 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c index 0998dcc9cac0..b29824448aa8 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c @@ -24,16 +24,8 @@ #define MLXSW_THERMAL_ZONE_MAX_NAME 16 #define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0) #define MLXSW_THERMAL_MAX_STATE 10 +#define MLXSW_THERMAL_MIN_STATE 2 #define MLXSW_THERMAL_MAX_DUTY 255 -/* Minimum and maximum fan allowed speed in percent: from 20% to 100%. Values - * MLXSW_THERMAL_MAX_STATE + x, where x is between 2 and 10 are used for - * setting fan speed dynamic minimum. For example, if value is set to 14 (40%) - * cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to - * introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100. - */ -#define MLXSW_THERMAL_SPEED_MIN (MLXSW_THERMAL_MAX_STATE + 2) -#define MLXSW_THERMAL_SPEED_MAX (MLXSW_THERMAL_MAX_STATE * 2) -#define MLXSW_THERMAL_SPEED_MIN_LEVEL 2 /* 20% */ /* External cooling devices, allowed for binding to mlxsw thermal zones. */ static char * const mlxsw_thermal_external_allowed_cdev[] = { @@ -646,49 +638,16 @@ static int mlxsw_thermal_set_cur_state(struct thermal_cooling_device *cdev, struct mlxsw_thermal *thermal = cdev->devdata; struct device *dev = thermal->bus_info->dev; char mfsc_pl[MLXSW_REG_MFSC_LEN]; - unsigned long cur_state, i; int idx; - u8 duty; int err; + if (state > MLXSW_THERMAL_MAX_STATE) + return -EINVAL; + idx = mlxsw_get_cooling_device_idx(thermal, cdev); if (idx < 0) return idx; - /* Verify if this request is for changing allowed fan dynamical - * minimum. If it is - update cooling levels accordingly and update - * state, if current state is below the newly requested minimum state. - * For example, if current state is 5, and minimal state is to be - * changed from 4 to 6, thermal->cooling_levels[0 to 5] will be changed - * all from 4 to 6. And state 5 (thermal->cooling_levels[4]) should be - * overwritten. - */ - if (state >= MLXSW_THERMAL_SPEED_MIN && - state <= MLXSW_THERMAL_SPEED_MAX) { - state -= MLXSW_THERMAL_MAX_STATE; - for (i = 0; i <= MLXSW_THERMAL_MAX_STATE; i++) - thermal->cooling_levels[i] = max(state, i); - - mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0); - err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl); - if (err) - return err; - - duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl); - cur_state = mlxsw_duty_to_state(duty); - - /* If current fan state is lower than requested dynamical - * minimum, increase fan speed up to dynamical minimum. - */ - if (state < cur_state) - return 0; - - state = cur_state; - } - - if (state > MLXSW_THERMAL_MAX_STATE) - return -EINVAL; - /* Normalize the state to the valid speed range. */ state = thermal->cooling_levels[state]; mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state)); @@ -998,8 +957,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core, /* Initialize cooling levels per PWM state. */ for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++) - thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL, - i); + thermal->cooling_levels[i] = max(MLXSW_THERMAL_MIN_STATE, i); thermal->polling_delay = bus_info->low_frequency ? MLXSW_THERMAL_SLOW_POLL_INT : -- cgit v1.2.3 From a2d859e3fc97e79d907761550dbc03ff1b36479c Mon Sep 17 00:00:00 2001 From: Eiichi Tsukata Date: Wed, 13 Oct 2021 17:27:29 -0300 Subject: sctp: account stream padding length for reconf chunk sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich Cc: Neil Horman Cc: Greg KH Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by: Eiichi Tsukata Signed-off-by: Eiichi Tsukata Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: Marcelo Ricardo Leitner Reviewed-by: Xin Long Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.com Signed-off-by: Jakub Kicinski --- net/sctp/sm_make_chunk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index b8fa8f1a7277..c7503fd64915 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -3697,7 +3697,7 @@ struct sctp_chunk *sctp_make_strreset_req( outlen = (sizeof(outreq) + stream_len) * out; inlen = (sizeof(inreq) + stream_len) * in; - retval = sctp_make_reconf(asoc, outlen + inlen); + retval = sctp_make_reconf(asoc, SCTP_PAD4(outlen) + SCTP_PAD4(inlen)); if (!retval) return NULL; -- cgit v1.2.3 From ea142b09a6399fb2c35c07198e3f0e2423273540 Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Thu, 14 Oct 2021 19:02:14 +0800 Subject: MAINTAINERS: Update the devicetree documentation path of imx fec driver Change the devicetree documentation path to "Documentation/devicetree/bindings/net/fsl,fec.yaml" since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already. Signed-off-by: Cai Huoqing Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 17f652b2f653..c4f2f3382e26 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7440,7 +7440,7 @@ FREESCALE IMX / MXC FEC DRIVER M: Joakim Zhang L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/fsl-fec.txt +F: Documentation/devicetree/bindings/net/fsl,fec.yaml F: drivers/net/ethernet/freescale/fec.h F: drivers/net/ethernet/freescale/fec_main.c F: drivers/net/ethernet/freescale/fec_ptp.c -- cgit v1.2.3 From 1fcd794518b7644169595c66b1bfe726d1f498ab Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 14 Oct 2021 05:50:50 -0400 Subject: icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done step by step and skb_header_pointer() return value should always be checked, this patch fixes 3 places in there: - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name from skb by skb_header_pointer(), its len is ident_len. Besides, the return value of skb_header_pointer() should always be checked. - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of skb_header_pointer(), and also do the return value check for skb_header_pointer(). - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr. ctype3_hdr.addrlen, skb_header_pointer() should be called first, then check its return value and ident_len. On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident. addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value. On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr)" or "ident_len". v1->v2: - To make it more clear, call skb_header_pointer() once only for iio->indent's parsing as Jakub Suggested. v2->v3: - The extobj_hdr.length check against sizeof(_iio) should be done before calling skb_header_pointer(), as Eric noticed. Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Reported-by: Dan Carpenter Signed-off-by: Xin Long Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/icmp.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 8b30cadff708..b7e277d8a84d 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -1054,14 +1054,19 @@ bool icmp_build_probe(struct sk_buff *skb, struct icmphdr *icmphdr) iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr), &_iio); if (!ext_hdr || !iio) goto send_mal_query; - if (ntohs(iio->extobj_hdr.length) <= sizeof(iio->extobj_hdr)) + if (ntohs(iio->extobj_hdr.length) <= sizeof(iio->extobj_hdr) || + ntohs(iio->extobj_hdr.length) > sizeof(_iio)) goto send_mal_query; ident_len = ntohs(iio->extobj_hdr.length) - sizeof(iio->extobj_hdr); + iio = skb_header_pointer(skb, sizeof(_ext_hdr), + sizeof(iio->extobj_hdr) + ident_len, &_iio); + if (!iio) + goto send_mal_query; + status = 0; dev = NULL; switch (iio->extobj_hdr.class_type) { case ICMP_EXT_ECHO_CTYPE_NAME: - iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(_iio), &_iio); if (ident_len >= IFNAMSIZ) goto send_mal_query; memset(buff, 0, sizeof(buff)); @@ -1069,30 +1074,24 @@ bool icmp_build_probe(struct sk_buff *skb, struct icmphdr *icmphdr) dev = dev_get_by_name(net, buff); break; case ICMP_EXT_ECHO_CTYPE_INDEX: - iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr) + - sizeof(iio->ident.ifindex), &_iio); if (ident_len != sizeof(iio->ident.ifindex)) goto send_mal_query; dev = dev_get_by_index(net, ntohl(iio->ident.ifindex)); break; case ICMP_EXT_ECHO_CTYPE_ADDR: - if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + + if (ident_len < sizeof(iio->ident.addr.ctype3_hdr) || + ident_len != sizeof(iio->ident.addr.ctype3_hdr) + iio->ident.addr.ctype3_hdr.addrlen) goto send_mal_query; switch (ntohs(iio->ident.addr.ctype3_hdr.afi)) { case ICMP_AFI_IP: - iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr) + - sizeof(struct in_addr), &_iio); - if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + - sizeof(struct in_addr)) + if (iio->ident.addr.ctype3_hdr.addrlen != sizeof(struct in_addr)) goto send_mal_query; dev = ip_dev_find(net, iio->ident.addr.ip_addr.ipv4_addr); break; #if IS_ENABLED(CONFIG_IPV6) case ICMP_AFI_IP6: - iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(_iio), &_iio); - if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) + - sizeof(struct in6_addr)) + if (iio->ident.addr.ctype3_hdr.addrlen != sizeof(struct in6_addr)) goto send_mal_query; dev = ipv6_stub->ipv6_dev_find(net, &iio->ident.addr.ip_addr.ipv6_addr, dev); dev_hold(dev); -- cgit v1.2.3 From 14cfbb7a7856f190035f8e53045bdbfa648fae41 Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Thu, 14 Oct 2021 22:04:00 +0800 Subject: io_uring: fix wrong condition to grab uring lock Grab uring lock when we are in io-worker rather than in the original or system-wq context since we already hold it in these two situation. Signed-off-by: Hao Xu Fixes: b66ceaf324b3 ("io_uring: move iopoll reissue into regular IO path") Link: https://lore.kernel.org/r/20211014140400.50235-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 6b9e70208782..e68d27829bb2 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -2949,7 +2949,7 @@ static void kiocb_done(struct kiocb *kiocb, ssize_t ret, struct io_ring_ctx *ctx = req->ctx; req_set_fail(req); - if (issue_flags & IO_URING_F_NONBLOCK) { + if (!(issue_flags & IO_URING_F_NONBLOCK)) { mutex_lock(&ctx->uring_lock); __io_req_complete(req, issue_flags, ret, cflags); mutex_unlock(&ctx->uring_lock); -- cgit v1.2.3 From ff7e93219442f5ac5b2cfd33e4fe4b7d5942f957 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Mon, 28 Jun 2021 10:53:45 -0700 Subject: ice: Fix failure to re-add LAN/RDMA Tx queues Currently if the VSI is rebuilt/removed and the RDMA PF driver is active the RDMA Tx queue scheduler node configuration will not be cleaned up. This will cause the rebuild/re-add of the VSI to fail due to the software structures not being correctly cleaned up for the VSI index. Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there are no RDMA scheduler nodes created, then there is no harm in calling ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if RDMA support is added for other VSI types they will also get this change. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Brett Creeley Tested-by: Jerzy Wiktor Jurkowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_lib.c | 9 +++++++++ drivers/net/ethernet/intel/ice/ice_sched.c | 13 +++++++++++++ drivers/net/ethernet/intel/ice/ice_sched.h | 1 + 3 files changed, 23 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index dde9802c6c72..b718e196af2a 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2841,6 +2841,7 @@ void ice_napi_del(struct ice_vsi *vsi) */ int ice_vsi_release(struct ice_vsi *vsi) { + enum ice_status err; struct ice_pf *pf; if (!vsi->back) @@ -2912,6 +2913,10 @@ int ice_vsi_release(struct ice_vsi *vsi) ice_fltr_remove_all(vsi); ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx); + err = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx); + if (err) + dev_err(ice_pf_to_dev(vsi->back), "Failed to remove RDMA scheduler config for VSI %u, err %d\n", + vsi->vsi_num, err); ice_vsi_delete(vsi); ice_vsi_free_q_vectors(vsi); @@ -3092,6 +3097,10 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi) prev_num_q_vectors = ice_vsi_rebuild_get_coalesce(vsi, coalesce); ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx); + ret = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx); + if (ret) + dev_err(ice_pf_to_dev(vsi->back), "Failed to remove RDMA scheduler config for VSI %u, err %d\n", + vsi->vsi_num, ret); ice_vsi_free_q_vectors(vsi); /* SR-IOV determines needed MSIX resources all at once instead of per diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c index 9f07b6641705..2d9b10277186 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.c +++ b/drivers/net/ethernet/intel/ice/ice_sched.c @@ -2070,6 +2070,19 @@ enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle) return ice_sched_rm_vsi_cfg(pi, vsi_handle, ICE_SCHED_NODE_OWNER_LAN); } +/** + * ice_rm_vsi_rdma_cfg - remove VSI and its RDMA children nodes + * @pi: port information structure + * @vsi_handle: software VSI handle + * + * This function clears the VSI and its RDMA children nodes from scheduler tree + * for all TCs. + */ +enum ice_status ice_rm_vsi_rdma_cfg(struct ice_port_info *pi, u16 vsi_handle) +{ + return ice_sched_rm_vsi_cfg(pi, vsi_handle, ICE_SCHED_NODE_OWNER_RDMA); +} + /** * ice_get_agg_info - get the aggregator ID * @hw: pointer to the hardware structure diff --git a/drivers/net/ethernet/intel/ice/ice_sched.h b/drivers/net/ethernet/intel/ice/ice_sched.h index 9beef8f0ec76..fdf7a5882f07 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.h +++ b/drivers/net/ethernet/intel/ice/ice_sched.h @@ -89,6 +89,7 @@ enum ice_status ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs, u8 owner, bool enable); enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle); +enum ice_status ice_rm_vsi_rdma_cfg(struct ice_port_info *pi, u16 vsi_handle); /* Tx scheduler rate limiter functions */ enum ice_status -- cgit v1.2.3 From 73e30a62b19b9fbb4e6a3465c59da186630d5f2e Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Mon, 4 Oct 2021 05:15:25 -0700 Subject: ice: Avoid crash from unnecessary IDA free In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. Fixes: d25a0fc41c1f9 ("ice: Initialize RDMA support") Reported-by: Jun Miao Signed-off-by: Dave Ertman Tested-by: Jesse Brandeburg Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 0d6c143f6653..94037881bfd8 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4224,6 +4224,9 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) if (!pf) return -ENOMEM; + /* initialize Auxiliary index to invalid value */ + pf->aux_idx = -1; + /* set up for high or low DMA */ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); if (err) @@ -4615,7 +4618,8 @@ static void ice_remove(struct pci_dev *pdev) ice_aq_cancel_waiting_tasks(pf); ice_unplug_aux_dev(pf); - ida_free(&ice_aux_ida, pf->aux_idx); + if (pf->aux_idx >= 0) + ida_free(&ice_aux_ida, pf->aux_idx); set_bit(ICE_DOWN, pf->state); mutex_destroy(&(&pf->hw)->fdir_fltr_lock); -- cgit v1.2.3 From e4c2efa1393c6f1fbfabf91d1d83fcb4ae691ccb Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Tue, 14 Sep 2021 19:25:05 -0400 Subject: ice: fix getting UDP tunnel entry Correct parameters order in call to ice_tunnel_idx_to_entry function. Entry in sparse port table is correct when the idx is 0. For idx 1 one correct entry should be skipped, for idx 2 two of them should be skipped etc. Change if condition to be true when idx is 0, which means that previous valid entry of this tunnel type were skipped. Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure") Signed-off-by: Michal Swiatkowski Tested-by: Gurucharan G Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_flex_pipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c index 06ac9badee77..1ac96dc66d0d 100644 --- a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c +++ b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c @@ -1668,7 +1668,7 @@ static u16 ice_tunnel_idx_to_entry(struct ice_hw *hw, enum ice_tunnel_type type, for (i = 0; i < hw->tnl.count && i < ICE_TUNNEL_MAX_ENTRIES; i++) if (hw->tnl.tbl[i].valid && hw->tnl.tbl[i].type == type && - idx--) + idx-- == 0) return i; WARN_ON_ONCE(1); @@ -1828,7 +1828,7 @@ int ice_udp_tunnel_set_port(struct net_device *netdev, unsigned int table, u16 index; tnl_type = ti->type == UDP_TUNNEL_TYPE_VXLAN ? TNL_VXLAN : TNL_GENEVE; - index = ice_tunnel_idx_to_entry(&pf->hw, idx, tnl_type); + index = ice_tunnel_idx_to_entry(&pf->hw, tnl_type, idx); status = ice_create_tunnel(&pf->hw, index, tnl_type, ntohs(ti->port)); if (status) { -- cgit v1.2.3 From b726ddf984a56a385c9df406a66c221f3a77c951 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Mon, 27 Sep 2021 11:21:50 -0700 Subject: ice: Print the api_patch as part of the fw.mgmt.api Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley Tested-by: Gurucharan G Signed-off-by: Tony Nguyen --- Documentation/networking/devlink/ice.rst | 9 +++++---- drivers/net/ethernet/intel/ice/ice_devlink.c | 3 ++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index a432dc419fa4..5d97cee9457b 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -30,10 +30,11 @@ The ``ice`` driver reports the following versions PHY, link, etc. * - ``fw.mgmt.api`` - running - - 1.5 - - 2-digit version number of the API exported over the AdminQ by the - management firmware. Used by the driver to identify what commands - are supported. + - 1.5.1 + - 3-digit version number (major.minor.patch) of the API exported over + the AdminQ by the management firmware. Used by the driver to + identify what commands are supported. Historical versions of the + kernel only displayed a 2-digit version number (major.minor). * - ``fw.mgmt.build`` - running - 0x305d955f diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c index 14afce82ef63..da7288bdc9a3 100644 --- a/drivers/net/ethernet/intel/ice/ice_devlink.c +++ b/drivers/net/ethernet/intel/ice/ice_devlink.c @@ -63,7 +63,8 @@ static int ice_info_fw_api(struct ice_pf *pf, struct ice_info_ctx *ctx) { struct ice_hw *hw = &pf->hw; - snprintf(ctx->buf, sizeof(ctx->buf), "%u.%u", hw->api_maj_ver, hw->api_min_ver); + snprintf(ctx->buf, sizeof(ctx->buf), "%u.%u.%u", hw->api_maj_ver, + hw->api_min_ver, hw->api_patch); return 0; } -- cgit v1.2.3 From 8e820f962345e6ce6f4677044209f23dde39d76d Mon Sep 17 00:00:00 2001 From: Alexey Bayduraev Date: Wed, 29 Sep 2021 12:14:45 +0300 Subject: perf report: Output non-zero offset for decompressed records Print offset of PERF_RECORD_COMPRESSED record instead of zero for decompressed records in raw trace dump (-D option of perf-report): 0x17cf08 [0x28]: event: 9 instead of: 0 [0x28]: event: 9 The fix is not critical, because currently file_pos for compressed events is used in perf_session__process_event only to show offsets in the raw dump. This patch was separated from patchset: https://lore.kernel.org/lkml/cover.1629186429.git.alexey.v.bayduraev@linux.intel.com/ and was already rewieved. Reviewed-by: Riccardo Mancini Signed-off-by: Alexey Bayduraev Tested-by: Riccardo Mancini Acked-by: Andi Kleen Acked-by: Jiri Olsa Acked-by: Namhyung Kim Cc: Adrian Hunter Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Alexei Budankov Cc: Ingo Molnar Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20210929091445.18274-1-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 069c2cfdd3be..352f16076e01 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -2116,7 +2116,7 @@ fetch_decomp_event(u64 head, size_t mmap_size, char *buf, bool needs_swap) static int __perf_session__process_decomp_events(struct perf_session *session) { s64 skip; - u64 size, file_pos = 0; + u64 size; struct decomp *decomp = session->decomp_last; if (!decomp) @@ -2132,7 +2132,7 @@ static int __perf_session__process_decomp_events(struct perf_session *session) size = event->header.size; if (size < sizeof(struct perf_event_header) || - (skip = perf_session__process_event(session, event, file_pos)) < 0) { + (skip = perf_session__process_event(session, event, decomp->file_pos)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", decomp->file_pos + decomp->head, event->header.size, event->header.type); return -EINVAL; -- cgit v1.2.3 From f304c8d949f9adc2ef51304b63e49d5ea1c2d288 Mon Sep 17 00:00:00 2001 From: Shunsuke Nakamura Date: Wed, 6 Oct 2021 18:57:03 +0900 Subject: libperf test evsel: Fix build error on !x86 architectures In test_stat_user_read, following build error occurs except i386 and x86_64 architectures: tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable] struct perf_event_mmap_page *pc; Fix build error. Signed-off-by: Shunsuke Nakamura Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20211006095703.477826-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/perf/tests/test-evsel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/lib/perf/tests/test-evsel.c b/tools/lib/perf/tests/test-evsel.c index a184e4861627..9abd4c0bf6db 100644 --- a/tools/lib/perf/tests/test-evsel.c +++ b/tools/lib/perf/tests/test-evsel.c @@ -148,6 +148,7 @@ static int test_stat_user_read(int event) __T("failed to mmap evsel", err == 0); pc = perf_evsel__mmap_base(evsel, 0, 0); + __T("failed to get mmapped address", pc); #if defined(__i386__) || defined(__x86_64__) __T("userspace counter access not supported", pc->cap_user_rdpmc); -- cgit v1.2.3 From 3ff6d64e68abc231955d216236615918797614ae Mon Sep 17 00:00:00 2001 From: Shunsuke Nakamura Date: Mon, 11 Oct 2021 17:37:04 +0900 Subject: libperf tests: Fix test_stat_cpu The `cpu` argument of perf_evsel__read() must specify the cpu index. perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index) and is thus not appropriate for use with perf_evsel__read(). So, if there is an offline CPU, the cpu number specified in the argument may point out of range because the cpu number and the cpu index are different. Fix test_stat_cpu(). Testing it: # make tests -C tools/lib/perf/ make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' running static: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK running dynamic: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' Signed-off-by: Shunsuke Nakamura Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/perf/tests/test-evlist.c | 6 +++--- tools/lib/perf/tests/test-evsel.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/lib/perf/tests/test-evlist.c b/tools/lib/perf/tests/test-evlist.c index c67c83399170..ce91a582f0e4 100644 --- a/tools/lib/perf/tests/test-evlist.c +++ b/tools/lib/perf/tests/test-evlist.c @@ -40,7 +40,7 @@ static int test_stat_cpu(void) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK, }; - int err, cpu, tmp; + int err, idx; cpus = perf_cpu_map__new(NULL); __T("failed to create cpus", cpus); @@ -70,10 +70,10 @@ static int test_stat_cpu(void) perf_evlist__for_each_evsel(evlist, evsel) { cpus = perf_evsel__cpus(evsel); - perf_cpu_map__for_each_cpu(cpu, tmp, cpus) { + for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) { struct perf_counts_values counts = { .val = 0 }; - perf_evsel__read(evsel, cpu, 0, &counts); + perf_evsel__read(evsel, idx, 0, &counts); __T("failed to read value for evsel", counts.val != 0); } } diff --git a/tools/lib/perf/tests/test-evsel.c b/tools/lib/perf/tests/test-evsel.c index 9abd4c0bf6db..33ae9334861a 100644 --- a/tools/lib/perf/tests/test-evsel.c +++ b/tools/lib/perf/tests/test-evsel.c @@ -22,7 +22,7 @@ static int test_stat_cpu(void) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; - int err, cpu, tmp; + int err, idx; cpus = perf_cpu_map__new(NULL); __T("failed to create cpus", cpus); @@ -33,10 +33,10 @@ static int test_stat_cpu(void) err = perf_evsel__open(evsel, cpus, NULL); __T("failed to open evsel", err == 0); - perf_cpu_map__for_each_cpu(cpu, tmp, cpus) { + for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) { struct perf_counts_values counts = { .val = 0 }; - perf_evsel__read(evsel, cpu, 0, &counts); + perf_evsel__read(evsel, idx, 0, &counts); __T("failed to read value for evsel", counts.val != 0); } -- cgit v1.2.3 From a482c5e00a9b5a194085bcd372ac36141028becb Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 12 Oct 2021 08:18:13 -0400 Subject: netfilter: ip6t_rt: fix rt0_hdr parsing in rt_mt6 In rt_mt6(), when it's a nonlinear skb, the 1st skb_header_pointer() only copies sizeof(struct ipv6_rt_hdr) to _route that rh points to. The access by ((const struct rt0_hdr *)rh)->reserved will overflow the buffer. So this access should be moved below the 2nd call to skb_header_pointer(). Besides, after the 2nd skb_header_pointer(), its return value should also be checked, othersize, *rp may cause null-pointer-ref. v1->v2: - clean up some old debugging log. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Dan Carpenter Signed-off-by: Xin Long Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6t_rt.c | 48 ++++++-------------------------------------- 1 file changed, 6 insertions(+), 42 deletions(-) diff --git a/net/ipv6/netfilter/ip6t_rt.c b/net/ipv6/netfilter/ip6t_rt.c index 733c83d38b30..4ad8b2032f1f 100644 --- a/net/ipv6/netfilter/ip6t_rt.c +++ b/net/ipv6/netfilter/ip6t_rt.c @@ -25,12 +25,7 @@ MODULE_AUTHOR("Andras Kis-Szabo "); static inline bool segsleft_match(u_int32_t min, u_int32_t max, u_int32_t id, bool invert) { - bool r; - pr_debug("segsleft_match:%c 0x%x <= 0x%x <= 0x%x\n", - invert ? '!' : ' ', min, id, max); - r = (id >= min && id <= max) ^ invert; - pr_debug(" result %s\n", r ? "PASS" : "FAILED"); - return r; + return (id >= min && id <= max) ^ invert; } static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par) @@ -65,30 +60,6 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par) return false; } - pr_debug("IPv6 RT LEN %u %u ", hdrlen, rh->hdrlen); - pr_debug("TYPE %04X ", rh->type); - pr_debug("SGS_LEFT %u %02X\n", rh->segments_left, rh->segments_left); - - pr_debug("IPv6 RT segsleft %02X ", - segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1], - rh->segments_left, - !!(rtinfo->invflags & IP6T_RT_INV_SGS))); - pr_debug("type %02X %02X %02X ", - rtinfo->rt_type, rh->type, - (!(rtinfo->flags & IP6T_RT_TYP) || - ((rtinfo->rt_type == rh->type) ^ - !!(rtinfo->invflags & IP6T_RT_INV_TYP)))); - pr_debug("len %02X %04X %02X ", - rtinfo->hdrlen, hdrlen, - !(rtinfo->flags & IP6T_RT_LEN) || - ((rtinfo->hdrlen == hdrlen) ^ - !!(rtinfo->invflags & IP6T_RT_INV_LEN))); - pr_debug("res %02X %02X %02X ", - rtinfo->flags & IP6T_RT_RES, - ((const struct rt0_hdr *)rh)->reserved, - !((rtinfo->flags & IP6T_RT_RES) && - (((const struct rt0_hdr *)rh)->reserved))); - ret = (segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1], rh->segments_left, !!(rtinfo->invflags & IP6T_RT_INV_SGS))) && @@ -107,22 +78,22 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par) reserved), sizeof(_reserved), &_reserved); + if (!rp) { + par->hotdrop = true; + return false; + } ret = (*rp == 0); } - pr_debug("#%d ", rtinfo->addrnr); if (!(rtinfo->flags & IP6T_RT_FST)) { return ret; } else if (rtinfo->flags & IP6T_RT_FST_NSTRICT) { - pr_debug("Not strict "); if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) { - pr_debug("There isn't enough space\n"); return false; } else { unsigned int i = 0; - pr_debug("#%d ", rtinfo->addrnr); for (temp = 0; temp < (unsigned int)((hdrlen - 8) / 16); temp++) { @@ -138,26 +109,20 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par) return false; } - if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { - pr_debug("i=%d temp=%d;\n", i, temp); + if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) i++; - } if (i == rtinfo->addrnr) break; } - pr_debug("i=%d #%d\n", i, rtinfo->addrnr); if (i == rtinfo->addrnr) return ret; else return false; } } else { - pr_debug("Strict "); if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) { - pr_debug("There isn't enough space\n"); return false; } else { - pr_debug("#%d ", rtinfo->addrnr); for (temp = 0; temp < rtinfo->addrnr; temp++) { ap = skb_header_pointer(skb, ptr @@ -173,7 +138,6 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par) if (!ipv6_addr_equal(ap, &rtinfo->addrs[temp])) break; } - pr_debug("temp=%d #%d\n", temp, rtinfo->addrnr); if (temp == rtinfo->addrnr && temp == (unsigned int)((hdrlen - 8) / 16)) return ret; -- cgit v1.2.3 From 174c376278949c44aad89c514a6b5db6cee8db59 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Tue, 12 Oct 2021 16:54:37 +0200 Subject: netfilter: ipvs: make global sysctl readonly in non-init netns Because the data pointer of net/ipv4/vs/debug_level is not updated per netns, it must be marked as read-only in non-init netns. Fixes: c6d2d445d8de ("IPVS: netns, final patch enabling network name space.") Signed-off-by: Antoine Tenart Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index c25097092a06..29ec3ef63edc 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -4090,6 +4090,11 @@ static int __net_init ip_vs_control_net_init_sysctl(struct netns_ipvs *ipvs) tbl[idx++].data = &ipvs->sysctl_conn_reuse_mode; tbl[idx++].data = &ipvs->sysctl_schedule_icmp; tbl[idx++].data = &ipvs->sysctl_ignore_tunneled; +#ifdef CONFIG_IP_VS_DEBUG + /* Global sysctls must be ro in non-init netns */ + if (!net_eq(net, &init_net)) + tbl[idx++].mode = 0444; +#endif ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl); if (ipvs->sysctl_hdr == NULL) { -- cgit v1.2.3 From 3e6ed7703dae6838c104d73d3e76e9b79f5c0528 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 12 Oct 2021 18:37:09 +0200 Subject: selftests: netfilter: remove stray bash debug line This should not be there. Fixes: 2de03b45236f ("selftests: netfilter: add flowtable test script") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_flowtable.sh | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index 427d94816f2d..d4ffebb989f8 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -199,7 +199,6 @@ fi # test basic connectivity if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then echo "ERROR: ns1 cannot reach ns2" 1>&2 - bash exit 1 fi -- cgit v1.2.3 From a1467faa10414ab3d91be7ef6d2b11272ec00e95 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 5 Oct 2021 12:06:18 +0200 Subject: ARM: imx: register reset controller from a platform driver Starting with commit 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms""), the imx-drm driver fails to load due to forever dormant devlinks to the reset-controller node. This node was never associated with a struct device. Add a platform device to allow fw_devnode to activate the devlinks. Fixes: 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms"") Signed-off-by: Philipp Zabel Tested-by: Fabio Estevam Reviewed-by: Saravana Kannan Signed-off-by: Shawn Guo --- arch/arm/mach-imx/src.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 95fd1fbb0826..59a8e8cc4469 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -81,11 +82,6 @@ static const struct reset_control_ops imx_src_ops = { .reset = imx_src_reset_module, }; -static struct reset_controller_dev imx_reset_controller = { - .ops = &imx_src_ops, - .nr_resets = ARRAY_SIZE(sw_reset_bits), -}; - static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset) { writel_relaxed(enable, gpc_base + offset); @@ -177,10 +173,6 @@ void __init imx_src_init(void) src_base = of_iomap(np, 0); WARN_ON(!src_base); - imx_reset_controller.of_node = np; - if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) - reset_controller_register(&imx_reset_controller); - /* * force warm reset sources to generate cold reset * for a more reliable restart @@ -214,3 +206,33 @@ void __init imx7_src_init(void) if (!gpc_base) return; } + +static const struct of_device_id imx_src_dt_ids[] = { + { .compatible = "fsl,imx51-src" }, + { /* sentinel */ } +}; + +static int imx_src_probe(struct platform_device *pdev) +{ + struct reset_controller_dev *rcdev; + + rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL); + if (!rcdev) + return -ENOMEM; + + rcdev->ops = &imx_src_ops; + rcdev->dev = &pdev->dev; + rcdev->of_node = pdev->dev.of_node; + rcdev->nr_resets = ARRAY_SIZE(sw_reset_bits); + + return devm_reset_controller_register(&pdev->dev, rcdev); +} + +static struct platform_driver imx_src_driver = { + .driver = { + .name = "imx-src", + .of_match_table = imx_src_dt_ids, + }, + .probe = imx_src_probe, +}; +builtin_platform_driver(imx_src_driver); -- cgit v1.2.3 From 97794170b696856483f74b47bfb6049780d2d3a0 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 5 Oct 2021 19:29:08 -0700 Subject: drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by: Ville Syrjälä Signed-off-by: Douglas Anderson Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 6325877c5fd6..ea9a79bc9583 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1834,11 +1834,20 @@ static void connector_bad_edid(struct drm_connector *connector, u8 *edid, int num_blocks) { int i; - u8 num_of_ext = edid[0x7e]; + u8 last_block; + + /* + * 0x7e in the EDID is the number of extension blocks. The EDID + * is 1 (base block) + num_ext_blocks big. That means we can think + * of 0x7e in the EDID of the _index_ of the last block in the + * combined chunk of memory. + */ + last_block = edid[0x7e]; /* Calculate real checksum for the last edid extension block data */ - connector->real_edid_checksum = - drm_edid_block_checksum(edid + num_of_ext * EDID_LENGTH); + if (last_block < num_blocks) + connector->real_edid_checksum = + drm_edid_block_checksum(edid + last_block * EDID_LENGTH); if (connector->bad_edid_counter++ && !drm_debug_enabled(DRM_UT_KMS)) return; -- cgit v1.2.3 From b693e42921e0220c0d564c55c6cdc680b0f85390 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Tue, 5 Oct 2021 09:03:55 +0200 Subject: drm/fbdev: Clamp fbdev surface size if too large MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Clamp the fbdev surface size of the available maximumi height to avoid failing to init console emulation. An example error is shown below. bad framebuffer height 2304, should be >= 768 && <= 768 [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22) This is especially a problem with drivers that have very small screen sizes and cannot over-allocate at all. v2: * reduce warning level (Ville) Signed-off-by: Thomas Zimmermann Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Reviewed-by: Ville Syrjälä Reviewed-by: Alex Deucher Reported-by: Amanoel Dawod Reported-by: Zoltán Kővágó Reported-by: Michael Stapelberg Cc: Daniel Vetter Cc: Maxime Ripard Cc: dri-devel@lists.freedesktop.org Cc: # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 3ab078321045..8e7a124d6c5a 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1506,6 +1506,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, { struct drm_client_dev *client = &fb_helper->client; struct drm_device *dev = fb_helper->dev; + struct drm_mode_config *config = &dev->mode_config; int ret = 0; int crtc_count = 0; struct drm_connector_list_iter conn_iter; @@ -1663,6 +1664,11 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, /* Handle our overallocation */ sizes.surface_height *= drm_fbdev_overalloc; sizes.surface_height /= 100; + if (sizes.surface_height > config->max_height) { + drm_dbg_kms(dev, "Fbdev over-allocation too large; clamping height to %d\n", + config->max_height); + sizes.surface_height = config->max_height; + } /* push down into drivers */ ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes); -- cgit v1.2.3 From b253c3026c29d4231099d3cf8d984d25787793af Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Thu, 16 Sep 2021 12:36:44 -0700 Subject: drm/hyperv: Fix double mouse pointers Hyper-V supports a hardware cursor feature. It is not used by Linux VM, but the Hyper-V host still draws a point as an extra mouse pointer, which is unwanted, especially when Xorg is running. The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer. When the hyperv_drm driver was developed, the function synthvid_send_ptr() was not copied from the hyperv_fb driver. Fix the issue by adding the function into hyperv_drm. Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by: Dexuan Cui Reviewed-by: Haiyang Zhang Reviewed-by: Deepak Rawat Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com Signed-off-by: Dave Airlie --- drivers/gpu/drm/hyperv/hyperv_drm.h | 1 + drivers/gpu/drm/hyperv/hyperv_drm_modeset.c | 1 + drivers/gpu/drm/hyperv/hyperv_drm_proto.c | 54 ++++++++++++++++++++++++++++- 3 files changed, 55 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/hyperv/hyperv_drm.h b/drivers/gpu/drm/hyperv/hyperv_drm.h index 886add4f9cd0..d2d8582b36df 100644 --- a/drivers/gpu/drm/hyperv/hyperv_drm.h +++ b/drivers/gpu/drm/hyperv/hyperv_drm.h @@ -46,6 +46,7 @@ int hyperv_mode_config_init(struct hyperv_drm_device *hv); int hyperv_update_vram_location(struct hv_device *hdev, phys_addr_t vram_pp); int hyperv_update_situation(struct hv_device *hdev, u8 active, u32 bpp, u32 w, u32 h, u32 pitch); +int hyperv_hide_hw_ptr(struct hv_device *hdev); int hyperv_update_dirt(struct hv_device *hdev, struct drm_rect *rect); int hyperv_connect_vsp(struct hv_device *hdev); diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c b/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c index 6dd4717d3e1e..8c97a20dfe23 100644 --- a/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c +++ b/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c @@ -101,6 +101,7 @@ static void hyperv_pipe_enable(struct drm_simple_display_pipe *pipe, struct hyperv_drm_device *hv = to_hv(pipe->crtc.dev); struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + hyperv_hide_hw_ptr(hv->hdev); hyperv_update_situation(hv->hdev, 1, hv->screen_depth, crtc_state->mode.hdisplay, crtc_state->mode.vdisplay, diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c index 6d4bdccfbd1a..c0155c6271bf 100644 --- a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c +++ b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c @@ -299,6 +299,55 @@ int hyperv_update_situation(struct hv_device *hdev, u8 active, u32 bpp, return 0; } +/* + * Hyper-V supports a hardware cursor feature. It's not used by Linux VM, + * but the Hyper-V host still draws a point as an extra mouse pointer, + * which is unwanted, especially when Xorg is running. + * + * The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted + * pointer, by setting msg.ptr_pos.is_visible = 1 and setting the + * msg.ptr_shape.data. Note: setting msg.ptr_pos.is_visible to 0 doesn't + * work in tests. + * + * Copy synthvid_send_ptr() to hyperv_drm and rename it to + * hyperv_hide_hw_ptr(). Note: hyperv_hide_hw_ptr() is also called in the + * handler of the SYNTHVID_FEATURE_CHANGE event, otherwise the host still + * draws an extra unwanted mouse pointer after the VM Connection window is + * closed and reopened. + */ +int hyperv_hide_hw_ptr(struct hv_device *hdev) +{ + struct synthvid_msg msg; + + memset(&msg, 0, sizeof(struct synthvid_msg)); + msg.vid_hdr.type = SYNTHVID_POINTER_POSITION; + msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) + + sizeof(struct synthvid_pointer_position); + msg.ptr_pos.is_visible = 1; + msg.ptr_pos.video_output = 0; + msg.ptr_pos.image_x = 0; + msg.ptr_pos.image_y = 0; + hyperv_sendpacket(hdev, &msg); + + memset(&msg, 0, sizeof(struct synthvid_msg)); + msg.vid_hdr.type = SYNTHVID_POINTER_SHAPE; + msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) + + sizeof(struct synthvid_pointer_shape); + msg.ptr_shape.part_idx = SYNTHVID_CURSOR_COMPLETE; + msg.ptr_shape.is_argb = 1; + msg.ptr_shape.width = 1; + msg.ptr_shape.height = 1; + msg.ptr_shape.hot_x = 0; + msg.ptr_shape.hot_y = 0; + msg.ptr_shape.data[0] = 0; + msg.ptr_shape.data[1] = 1; + msg.ptr_shape.data[2] = 1; + msg.ptr_shape.data[3] = 1; + hyperv_sendpacket(hdev, &msg); + + return 0; +} + int hyperv_update_dirt(struct hv_device *hdev, struct drm_rect *rect) { struct hyperv_drm_device *hv = hv_get_drvdata(hdev); @@ -392,8 +441,11 @@ static void hyperv_receive_sub(struct hv_device *hdev) return; } - if (msg->vid_hdr.type == SYNTHVID_FEATURE_CHANGE) + if (msg->vid_hdr.type == SYNTHVID_FEATURE_CHANGE) { hv->dirt_needed = msg->feature_chg.is_dirt_needed; + if (hv->dirt_needed) + hyperv_hide_hw_ptr(hv->hdev); + } } static void hyperv_receive(void *ctx) -- cgit v1.2.3 From d1d94b0129dccd226784633c60b7df90e8a051b5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 Oct 2021 23:41:17 +0200 Subject: drm/nouveau/fifo: Reinstate the correct engine bit programming Commit 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") replaced fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned from the later g84_fifo_engine_id() are incremented by 1 compared to the previous g84_fifo_chan_engine() return values. This is fine either way for most of the code, except this one line where an engine bit programmed into the hardware is derived from the return value. Decrement the return value accordingly, otherwise the wrong engine bit is programmed into the hardware and that leads to the following failure: nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420 On the following hardware: lspci -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2) lspci -ns 01:00.0 01:00.0 0300: 10de:0a3c (rev a2) Fixes: 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") Signed-off-by: Marek Vasut Cc: # 5.12+ Cc: Ben Skeggs Cc: Karol Herbst Cc: Lyude Paul Reviewed-by: Karol Herbst Reviewed-by: Ben Skeggs Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c index 353b77d9b3dc..3492c561f2cf 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/chang84.c @@ -82,7 +82,7 @@ g84_fifo_chan_engine_fini(struct nvkm_fifo_chan *base, if (offset < 0) return 0; - engn = fifo->base.func->engine_id(&fifo->base, engine); + engn = fifo->base.func->engine_id(&fifo->base, engine) - 1; save = nvkm_mask(device, 0x002520, 0x0000003f, 1 << engn); nvkm_wr32(device, 0x0032fc, chan->base.inst->addr >> 12); done = nvkm_msec(device, 2000, -- cgit v1.2.3 From 1a361b41c1a1c399399cd2a83e449c452d9d8115 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 11 Oct 2021 01:00:06 -0700 Subject: drm/r128: fix build for UML MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a build error on CONFIG_UML, which does not support (provide) wbinvd(). UML can use the generic mb() instead. ../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’: ../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration] wbinvd(); ^~~~~~ Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap Cc: David Airlie Cc: Daniel Vetter Cc: dri-devel@lists.freedesktop.org Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: linux-um@lists.infradead.org Cc: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/r128/ati_pcigart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/r128/ati_pcigart.c b/drivers/gpu/drm/r128/ati_pcigart.c index 0ecccf25a3c7..d2a0f5394fef 100644 --- a/drivers/gpu/drm/r128/ati_pcigart.c +++ b/drivers/gpu/drm/r128/ati_pcigart.c @@ -214,7 +214,7 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga } ret = 0; -#if defined(__i386__) || defined(__x86_64__) +#ifdef CONFIG_X86 wbinvd(); #else mb(); -- cgit v1.2.3 From a14bc107edd0c108bda2245e50daa22f91c95d20 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 12 Oct 2021 13:52:42 +0200 Subject: drm/panel: olimex-lcd-olinuxino: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie --- drivers/gpu/drm/panel/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index beb581b96ecd..418638e6e3b0 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -295,6 +295,7 @@ config DRM_PANEL_OLIMEX_LCD_OLINUXINO depends on OF depends on I2C depends on BACKLIGHT_CLASS_DEVICE + select CRC32 help The panel is used with different sizes LCDs, from 480x272 to 1280x800, and 24 bit per pixel. -- cgit v1.2.3 From 3c414eb65c294719a91a746260085363413f91c1 Mon Sep 17 00:00:00 2001 From: Brendan Grieve Date: Fri, 15 Oct 2021 10:53:35 +0800 Subject: ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13 The GSP670 has 2 playback and 1 recording device that by default are detected in an incompatible order for alsa. This may have been done to make it compatible for the console by the manufacturer and only affects the latest firmware which uses its own ID. This quirk will resolve this by reordering the channels. Signed-off-by: Brendan Grieve Cc: Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index de18fff69280..2af8c68fac27 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -4012,6 +4012,38 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* + * Sennheiser GSP670 + * Change order of interfaces loaded + */ + USB_DEVICE(0x1395, 0x0300), + .bInterfaceClass = USB_CLASS_PER_INTERFACE, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = &(const struct snd_usb_audio_quirk[]) { + // Communication + { + .ifnum = 3, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + // Recording + { + .ifnum = 4, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + // Main + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC #undef USB_AUDIO_DEVICE -- cgit v1.2.3 From d94befbb5ae379f6dfd4fa6d460eacc09fa7b9c3 Mon Sep 17 00:00:00 2001 From: Davide Baldo Date: Fri, 15 Oct 2021 09:21:22 +0200 Subject: ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and rear speakers are silent, this patch fixes that by overriding the pin layout and by initializing the amplifier which needs a GPIO pin to be set to 1 then 0, similar to the existing HP Spectre x360 14 model. In order to have volume control, both front and rear speakers were forced to use the DAC1. This patch also correctly map the mute LED but since there is no microphone on/off switch exposed by the alsa subsystem it never turns on by itself. There are still known audio issues in this laptop: headset microphone doesn't work, the button to mute/unmute microphone is not yet mapped, the LED of the mute/unmute speakers doesn't seems to be exposed via GPIO and never turns on. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953 Signed-off-by: Davide Baldo Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 46 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1bbe22769ca9..965b096f416f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6406,6 +6406,44 @@ static void alc_fixup_no_int_mic(struct hda_codec *codec, } } +/* GPIO1 = amplifier on/off + * GPIO3 = mic mute LED + */ +static void alc285_fixup_hp_spectre_x360_eb1(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + static const hda_nid_t conn[] = { 0x02 }; + + struct alc_spec *spec = codec->spec; + static const struct hda_pintbl pincfgs[] = { + { 0x14, 0x90170110 }, /* front/high speakers */ + { 0x17, 0x90170130 }, /* back/bass speakers */ + { } + }; + + //enable micmute led + alc_fixup_hp_gpio_led(codec, action, 0x00, 0x04); + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + spec->micmute_led_polarity = 1; + /* needed for amp of back speakers */ + spec->gpio_mask |= 0x01; + spec->gpio_dir |= 0x01; + snd_hda_apply_pincfgs(codec, pincfgs); + /* share DAC to have unified volume control */ + snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn), conn); + snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn); + break; + case HDA_FIXUP_ACT_INIT: + /* need to toggle GPIO to enable the amp of back speakers */ + alc_update_gpio_data(codec, 0x01, true); + msleep(100); + alc_update_gpio_data(codec, 0x01, false); + break; + } +} + static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6558,6 +6596,7 @@ enum { ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, ALC280_FIXUP_HP_9480M, ALC245_FIXUP_HP_X360_AMP, + ALC285_FIXUP_HP_SPECTRE_X360_EB1, ALC288_FIXUP_DELL_HEADSET_MODE, ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, ALC288_FIXUP_DELL_XPS_13, @@ -8251,6 +8290,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_hp_spectre_x360, }, + [ALC285_FIXUP_HP_SPECTRE_X360_EB1] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_hp_spectre_x360_eb1 + }, [ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_ideapad_s740_coef, @@ -8585,6 +8628,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), + SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), @@ -9006,6 +9051,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"}, {.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"}, {.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"}, + {.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"}, {.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"}, {.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"}, {.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"}, -- cgit v1.2.3 From 019057bd73d1751fdfec41e43148baf3303d98f9 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 11:07:59 -0400 Subject: KVM: SEV-ES: fix length of string I/O The size of the data in the scratch buffer is not divided by the size of each port I/O operation, so vcpu->arch.pio.count ends up being larger than it should be by a factor of size. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Acked-by: Tom Lendacky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index c36b5fe4c27c..e672493b5d8d 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -2583,7 +2583,7 @@ int sev_es_string_io(struct vcpu_svm *svm, int size, unsigned int port, int in) return -EINVAL; return kvm_sev_es_string_io(&svm->vcpu, size, port, - svm->ghcb_sa, svm->ghcb_sa_len, in); + svm->ghcb_sa, svm->ghcb_sa_len / size, in); } void sev_es_init_vmcb(struct vcpu_svm *svm) -- cgit v1.2.3 From f42752729e2068a92c7d8b576d0dbbc9c1464149 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 14 Oct 2021 17:37:18 +0200 Subject: eeprom: 93xx46: fix MODULE_DEVICE_TABLE The newly added SPI device ID table does not work because the entry is incorrectly copied from the OF device table. During build testing, this shows as a compile failure when building it as a loadable module: drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table' MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); Change the entry to refer to the correct symbol. Fixes: 137879f7ff23 ("eeprom: 93xx46: Add SPI device ID table") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/eeprom_93xx46.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index 660ee924f8b1..1f15399e5cb4 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -421,7 +421,7 @@ static const struct spi_device_id eeprom_93xx46_spi_ids[] = { .driver_data = (kernel_ulong_t)µchip_93lc46b_data, }, {} }; -MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); +MODULE_DEVICE_TABLE(spi, eeprom_93xx46_spi_ids); static int eeprom_93xx46_probe_dt(struct spi_device *spi) { -- cgit v1.2.3 From 71920ea97d6d1d800ee8b51951dc3fda3f5dc698 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Wed, 6 Oct 2021 13:12:17 -0700 Subject: perf/x86/msr: Add Sapphire Rapids CPU support SMI_COUNT MSR is supported on Sapphire Rapids CPU. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com --- arch/x86/events/msr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c index c853b28efa33..96c775abe31f 100644 --- a/arch/x86/events/msr.c +++ b/arch/x86/events/msr.c @@ -68,6 +68,7 @@ static bool test_intel(int idx, void *data) case INTEL_FAM6_BROADWELL_D: case INTEL_FAM6_BROADWELL_G: case INTEL_FAM6_BROADWELL_X: + case INTEL_FAM6_SAPPHIRERAPIDS_X: case INTEL_FAM6_ATOM_SILVERMONT: case INTEL_FAM6_ATOM_SILVERMONT_D: -- cgit v1.2.3 From c2402d43d183b11445aed921e7bebcd47ef222f1 Mon Sep 17 00:00:00 2001 From: Kele Huang Date: Thu, 14 Oct 2021 11:19:52 +0800 Subject: ptp: fix error print of ptp_kvm on X86_64 platform Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported") fixes the error message print on ARM platform by only concerning about the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP. Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the same value 95. Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that -KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them. This patch fixes this by returning them to ptp_kvm_init() respectively. Signed-off-by: Kele Huang Signed-off-by: David S. Miller --- drivers/ptp/ptp_kvm_x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ptp/ptp_kvm_x86.c b/drivers/ptp/ptp_kvm_x86.c index d0096cd7096a..4991054a2135 100644 --- a/drivers/ptp/ptp_kvm_x86.c +++ b/drivers/ptp/ptp_kvm_x86.c @@ -31,10 +31,10 @@ int kvm_arch_ptp_init(void) ret = kvm_hypercall2(KVM_HC_CLOCK_PAIRING, clock_pair_gpa, KVM_CLOCK_PAIRING_WALLCLOCK); - if (ret == -KVM_ENOSYS || ret == -KVM_EOPNOTSUPP) + if (ret == -KVM_ENOSYS) return -ENODEV; - return 0; + return ret; } int kvm_arch_ptp_get_clock(struct timespec64 *ts) -- cgit v1.2.3 From 075718fdaf0efe20223571236c1bf14ca35a7aa1 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 14 Oct 2021 00:50:55 -0400 Subject: sctp: fix transport encap_port update in sctp_vtag_verify transport encap_port update should be updated when sctp_vtag_verify() succeeds, namely, returns 1, not returns 0. Correct it in this patch. While at it, also fix the indentation. Fixes: a1dd2cf2f1ae ("sctp: allow changing transport encap_port by peer packets") Signed-off-by: Xin Long Signed-off-by: David S. Miller --- include/net/sctp/sm.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 2eb6d7c2c931..f37c7a558d6d 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -384,11 +384,11 @@ sctp_vtag_verify(const struct sctp_chunk *chunk, * Verification Tag value does not match the receiver's own * tag value, the receiver shall silently discard the packet... */ - if (ntohl(chunk->sctp_hdr->vtag) == asoc->c.my_vtag) - return 1; + if (ntohl(chunk->sctp_hdr->vtag) != asoc->c.my_vtag) + return 0; chunk->transport->encap_port = SCTP_INPUT_CB(chunk->skb)->encap_port; - return 0; + return 1; } /* Check VTAG of the packet matches the sender's own tag and the T bit is -- cgit v1.2.3 From 46393d61a328d7c4e3264252dae891921126c674 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 15 Oct 2021 15:07:54 +0200 Subject: lan78xx: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Vegard Nossum Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index f87f17503373..b554054a7560 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -117,6 +117,7 @@ config USB_LAN78XX select PHYLIB select MICROCHIP_PHY select FIXED_PHY + select CRC32 help This option adds support for Microchip LAN78XX based USB 2 & USB 3 10/100/1000 Ethernet adapters. -- cgit v1.2.3 From 86f1e3a8489f6a0232c1f3bc2bdb379f5ccdecec Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 15 Oct 2021 10:26:04 +0300 Subject: tcp: md5: Fix overlap between vrf and non-vrf keys With net.ipv4.tcp_l3mdev_accept=1 it is possible for a listen socket to accept connection from the same client address in different VRFs. It is also possible to set different MD5 keys for these clients which differ only in the tcpm_l3index field. This appears to work when distinguishing between different VRFs but not between non-VRF and VRF connections. In particular: * tcp_md5_do_lookup_exact will match a non-vrf key against a vrf key. This means that adding a key with l3index != 0 after a key with l3index == 0 will cause the earlier key to be deleted. Both keys can be present if the non-vrf key is added later. * _tcp_md5_do_lookup can match a non-vrf key before a vrf key. This casues failures if the passwords differ. Fix this by making tcp_md5_do_lookup_exact perform an actual exact comparison on l3index and by making __tcp_md5_do_lookup perfer vrf-bound keys above other considerations like prefixlen. Fixes: dea53bb80e07 ("tcp: Add l3index to tcp_md5sig_key and md5 functions") Signed-off-by: Leonard Crestez Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 2e62e0d6373a..f64b6c8380e8 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1037,6 +1037,20 @@ static void tcp_v4_reqsk_destructor(struct request_sock *req) DEFINE_STATIC_KEY_FALSE(tcp_md5_needed); EXPORT_SYMBOL(tcp_md5_needed); +static bool better_md5_match(struct tcp_md5sig_key *old, struct tcp_md5sig_key *new) +{ + if (!old) + return true; + + /* l3index always overrides non-l3index */ + if (old->l3index && new->l3index == 0) + return false; + if (old->l3index == 0 && new->l3index) + return true; + + return old->prefixlen < new->prefixlen; +} + /* Find the Key structure for an address. */ struct tcp_md5sig_key *__tcp_md5_do_lookup(const struct sock *sk, int l3index, const union tcp_md5_addr *addr, @@ -1074,8 +1088,7 @@ struct tcp_md5sig_key *__tcp_md5_do_lookup(const struct sock *sk, int l3index, match = false; } - if (match && (!best_match || - key->prefixlen > best_match->prefixlen)) + if (match && better_md5_match(best_match, key)) best_match = key; } return best_match; @@ -1105,7 +1118,7 @@ static struct tcp_md5sig_key *tcp_md5_do_lookup_exact(const struct sock *sk, lockdep_sock_is_held(sk)) { if (key->family != family) continue; - if (key->l3index && key->l3index != l3index) + if (key->l3index != l3index) continue; if (!memcmp(&key->addr, addr, size) && key->prefixlen == prefixlen) -- cgit v1.2.3 From a76c2315bec7afeb9bafe776fe532106fa0a8b05 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 15 Oct 2021 10:26:05 +0300 Subject: tcp: md5: Allow MD5SIG_FLAG_IFINDEX with ifindex=0 Multiple VRFs are generally meant to be "separate" but right now md5 keys for the default VRF also affect connections inside VRFs if the IP addresses happen to overlap. So far the combination of TCP_MD5SIG_FLAG_IFINDEX with tcpm_ifindex == 0 was an error, accept this to mean "key only applies to default VRF". This is what applications using VRFs for traffic separation want. Signed-off-by: Leonard Crestez Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/tcp.h | 5 +++-- net/ipv4/tcp_ipv4.c | 26 ++++++++++++++++---------- net/ipv6/tcp_ipv6.c | 15 +++++++++------ 3 files changed, 28 insertions(+), 18 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 3166dc15d7d6..60c384569e9c 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1576,6 +1576,7 @@ struct tcp_md5sig_key { u8 keylen; u8 family; /* AF_INET or AF_INET6 */ u8 prefixlen; + u8 flags; union tcp_md5_addr addr; int l3index; /* set if key added with L3 scope */ u8 key[TCP_MD5SIG_MAXKEYLEN]; @@ -1621,10 +1622,10 @@ struct tcp_md5sig_pool { int tcp_v4_md5_hash_skb(char *md5_hash, const struct tcp_md5sig_key *key, const struct sock *sk, const struct sk_buff *skb); int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, - int family, u8 prefixlen, int l3index, + int family, u8 prefixlen, int l3index, u8 flags, const u8 *newkey, u8 newkeylen, gfp_t gfp); int tcp_md5_do_del(struct sock *sk, const union tcp_md5_addr *addr, - int family, u8 prefixlen, int l3index); + int family, u8 prefixlen, int l3index, u8 flags); struct tcp_md5sig_key *tcp_v4_md5_lookup(const struct sock *sk, const struct sock *addr_sk); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index f64b6c8380e8..5b8ce65dfc06 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1073,7 +1073,7 @@ struct tcp_md5sig_key *__tcp_md5_do_lookup(const struct sock *sk, int l3index, lockdep_sock_is_held(sk)) { if (key->family != family) continue; - if (key->l3index && key->l3index != l3index) + if (key->flags & TCP_MD5SIG_FLAG_IFINDEX && key->l3index != l3index) continue; if (family == AF_INET) { mask = inet_make_mask(key->prefixlen); @@ -1098,7 +1098,7 @@ EXPORT_SYMBOL(__tcp_md5_do_lookup); static struct tcp_md5sig_key *tcp_md5_do_lookup_exact(const struct sock *sk, const union tcp_md5_addr *addr, int family, u8 prefixlen, - int l3index) + int l3index, u8 flags) { const struct tcp_sock *tp = tcp_sk(sk); struct tcp_md5sig_key *key; @@ -1118,6 +1118,8 @@ static struct tcp_md5sig_key *tcp_md5_do_lookup_exact(const struct sock *sk, lockdep_sock_is_held(sk)) { if (key->family != family) continue; + if ((key->flags & TCP_MD5SIG_FLAG_IFINDEX) != (flags & TCP_MD5SIG_FLAG_IFINDEX)) + continue; if (key->l3index != l3index) continue; if (!memcmp(&key->addr, addr, size) && @@ -1142,7 +1144,7 @@ EXPORT_SYMBOL(tcp_v4_md5_lookup); /* This can be called on a newly created socket, from other files */ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, - int family, u8 prefixlen, int l3index, + int family, u8 prefixlen, int l3index, u8 flags, const u8 *newkey, u8 newkeylen, gfp_t gfp) { /* Add Key to the list */ @@ -1150,7 +1152,7 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, struct tcp_sock *tp = tcp_sk(sk); struct tcp_md5sig_info *md5sig; - key = tcp_md5_do_lookup_exact(sk, addr, family, prefixlen, l3index); + key = tcp_md5_do_lookup_exact(sk, addr, family, prefixlen, l3index, flags); if (key) { /* Pre-existing entry - just update that one. * Note that the key might be used concurrently. @@ -1195,6 +1197,7 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, key->family = family; key->prefixlen = prefixlen; key->l3index = l3index; + key->flags = flags; memcpy(&key->addr, addr, (family == AF_INET6) ? sizeof(struct in6_addr) : sizeof(struct in_addr)); @@ -1204,11 +1207,11 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr, EXPORT_SYMBOL(tcp_md5_do_add); int tcp_md5_do_del(struct sock *sk, const union tcp_md5_addr *addr, int family, - u8 prefixlen, int l3index) + u8 prefixlen, int l3index, u8 flags) { struct tcp_md5sig_key *key; - key = tcp_md5_do_lookup_exact(sk, addr, family, prefixlen, l3index); + key = tcp_md5_do_lookup_exact(sk, addr, family, prefixlen, l3index, flags); if (!key) return -ENOENT; hlist_del_rcu(&key->node); @@ -1242,6 +1245,7 @@ static int tcp_v4_parse_md5_keys(struct sock *sk, int optname, const union tcp_md5_addr *addr; u8 prefixlen = 32; int l3index = 0; + u8 flags; if (optlen < sizeof(cmd)) return -EINVAL; @@ -1252,6 +1256,8 @@ static int tcp_v4_parse_md5_keys(struct sock *sk, int optname, if (sin->sin_family != AF_INET) return -EINVAL; + flags = cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX; + if (optname == TCP_MD5SIG_EXT && cmd.tcpm_flags & TCP_MD5SIG_FLAG_PREFIX) { prefixlen = cmd.tcpm_prefixlen; @@ -1259,7 +1265,7 @@ static int tcp_v4_parse_md5_keys(struct sock *sk, int optname, return -EINVAL; } - if (optname == TCP_MD5SIG_EXT && + if (optname == TCP_MD5SIG_EXT && cmd.tcpm_ifindex && cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX) { struct net_device *dev; @@ -1280,12 +1286,12 @@ static int tcp_v4_parse_md5_keys(struct sock *sk, int optname, addr = (union tcp_md5_addr *)&sin->sin_addr.s_addr; if (!cmd.tcpm_keylen) - return tcp_md5_do_del(sk, addr, AF_INET, prefixlen, l3index); + return tcp_md5_do_del(sk, addr, AF_INET, prefixlen, l3index, flags); if (cmd.tcpm_keylen > TCP_MD5SIG_MAXKEYLEN) return -EINVAL; - return tcp_md5_do_add(sk, addr, AF_INET, prefixlen, l3index, + return tcp_md5_do_add(sk, addr, AF_INET, prefixlen, l3index, flags, cmd.tcpm_key, cmd.tcpm_keylen, GFP_KERNEL); } @@ -1609,7 +1615,7 @@ struct sock *tcp_v4_syn_recv_sock(const struct sock *sk, struct sk_buff *skb, * memory, then we end up not copying the key * across. Shucks. */ - tcp_md5_do_add(newsk, addr, AF_INET, 32, l3index, + tcp_md5_do_add(newsk, addr, AF_INET, 32, l3index, key->flags, key->key, key->keylen, GFP_ATOMIC); sk_nocaps_add(newsk, NETIF_F_GSO_MASK); } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 0ce52d46e4f8..b03dd02c9f13 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -599,6 +599,7 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname, struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&cmd.tcpm_addr; int l3index = 0; u8 prefixlen; + u8 flags; if (optlen < sizeof(cmd)) return -EINVAL; @@ -609,6 +610,8 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname, if (sin6->sin6_family != AF_INET6) return -EINVAL; + flags = cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX; + if (optname == TCP_MD5SIG_EXT && cmd.tcpm_flags & TCP_MD5SIG_FLAG_PREFIX) { prefixlen = cmd.tcpm_prefixlen; @@ -619,7 +622,7 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname, prefixlen = ipv6_addr_v4mapped(&sin6->sin6_addr) ? 32 : 128; } - if (optname == TCP_MD5SIG_EXT && + if (optname == TCP_MD5SIG_EXT && cmd.tcpm_ifindex && cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX) { struct net_device *dev; @@ -640,9 +643,9 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname, if (ipv6_addr_v4mapped(&sin6->sin6_addr)) return tcp_md5_do_del(sk, (union tcp_md5_addr *)&sin6->sin6_addr.s6_addr32[3], AF_INET, prefixlen, - l3index); + l3index, flags); return tcp_md5_do_del(sk, (union tcp_md5_addr *)&sin6->sin6_addr, - AF_INET6, prefixlen, l3index); + AF_INET6, prefixlen, l3index, flags); } if (cmd.tcpm_keylen > TCP_MD5SIG_MAXKEYLEN) @@ -650,12 +653,12 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname, if (ipv6_addr_v4mapped(&sin6->sin6_addr)) return tcp_md5_do_add(sk, (union tcp_md5_addr *)&sin6->sin6_addr.s6_addr32[3], - AF_INET, prefixlen, l3index, + AF_INET, prefixlen, l3index, flags, cmd.tcpm_key, cmd.tcpm_keylen, GFP_KERNEL); return tcp_md5_do_add(sk, (union tcp_md5_addr *)&sin6->sin6_addr, - AF_INET6, prefixlen, l3index, + AF_INET6, prefixlen, l3index, flags, cmd.tcpm_key, cmd.tcpm_keylen, GFP_KERNEL); } @@ -1404,7 +1407,7 @@ static struct sock *tcp_v6_syn_recv_sock(const struct sock *sk, struct sk_buff * * across. Shucks. */ tcp_md5_do_add(newsk, (union tcp_md5_addr *)&newsk->sk_v6_daddr, - AF_INET6, 128, l3index, key->key, key->keylen, + AF_INET6, 128, l3index, key->flags, key->key, key->keylen, sk_gfp_mask(sk, GFP_ATOMIC)); } #endif -- cgit v1.2.3 From 78a9cf6143e2d4fb4dd48dde529b24cd5b6bf0e0 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 15 Oct 2021 10:26:06 +0300 Subject: selftests: nettest: Add --{force,no}-bind-key-ifindex These options allow explicit control over the TCP_MD5SIG_FLAG_IFINDEX flag instead of always setting it based on binding to an interface. Do this by converting to getopt_long because nettest has too many single-character flags already and getopt_long is widely used in selftests. Signed-off-by: Leonard Crestez Reviewed-by: David Ahern Signed-off-by: David S. Miller --- tools/testing/selftests/net/nettest.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index bd6288302094..b599003eb5ba 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -101,6 +102,8 @@ struct sock_args { struct sockaddr_in6 v6; } md5_prefix; unsigned int prefix_len; + /* 0: default, -1: force off, +1: force on */ + int bind_key_ifindex; /* expected addresses and device index for connection */ const char *expected_dev; @@ -271,11 +274,14 @@ static int tcp_md5sig(int sd, void *addr, socklen_t alen, struct sock_args *args } memcpy(&md5sig.tcpm_addr, addr, alen); - if (args->ifindex) { + if ((args->ifindex && args->bind_key_ifindex >= 0) || args->bind_key_ifindex >= 1) { opt = TCP_MD5SIG_EXT; md5sig.tcpm_flags |= TCP_MD5SIG_FLAG_IFINDEX; md5sig.tcpm_ifindex = args->ifindex; + log_msg("TCP_MD5SIG_FLAG_IFINDEX set tcpm_ifindex=%d\n", md5sig.tcpm_ifindex); + } else { + log_msg("TCP_MD5SIG_FLAG_IFINDEX off\n", md5sig.tcpm_ifindex); } rc = setsockopt(sd, IPPROTO_TCP, opt, &md5sig, sizeof(md5sig)); @@ -1822,6 +1828,14 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args) } #define GETOPT_STR "sr:l:c:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6xL:0:1:2:3:Fbq" +#define OPT_FORCE_BIND_KEY_IFINDEX 1001 +#define OPT_NO_BIND_KEY_IFINDEX 1002 + +static struct option long_opts[] = { + {"force-bind-key-ifindex", 0, 0, OPT_FORCE_BIND_KEY_IFINDEX}, + {"no-bind-key-ifindex", 0, 0, OPT_NO_BIND_KEY_IFINDEX}, + {0, 0, 0, 0} +}; static void print_usage(char *prog) { @@ -1858,6 +1872,10 @@ static void print_usage(char *prog) " -M password use MD5 sum protection\n" " -X password MD5 password for client mode\n" " -m prefix/len prefix and length to use for MD5 key\n" + " --no-bind-key-ifindex: Force TCP_MD5SIG_FLAG_IFINDEX off\n" + " --force-bind-key-ifindex: Force TCP_MD5SIG_FLAG_IFINDEX on\n" + " (default: only if -I is passed)\n" + "\n" " -g grp multicast group (e.g., 239.1.1.1)\n" " -i interactive mode (default is echo and terminate)\n" "\n" @@ -1893,7 +1911,7 @@ int main(int argc, char *argv[]) * process input args */ - while ((rc = getopt(argc, argv, GETOPT_STR)) != -1) { + while ((rc = getopt_long(argc, argv, GETOPT_STR, long_opts, NULL)) != -1) { switch (rc) { case 'B': both_mode = 1; @@ -1966,6 +1984,12 @@ int main(int argc, char *argv[]) case 'M': args.password = optarg; break; + case OPT_FORCE_BIND_KEY_IFINDEX: + args.bind_key_ifindex = 1; + break; + case OPT_NO_BIND_KEY_IFINDEX: + args.bind_key_ifindex = -1; + break; case 'X': args.client_pw = optarg; break; -- cgit v1.2.3 From 64e4017778bea04a50ed564615339801e02d2d32 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 15 Oct 2021 10:26:07 +0300 Subject: selftests: net/fcnal: Test --{force,no}-bind-key-ifindex Test that applications binding listening sockets to VRFs without specifying TCP_MD5SIG_FLAG_IFINDEX will work as expected. This would be broken if __tcp_md5_do_lookup always made a strict comparison on l3index. See this email: https://lore.kernel.org/netdev/209548b5-27d2-2059-f2e9-2148f5a0291b@gmail.com/ Applications using tcp_l3mdev_accept=1 and a single global socket (not bound to any interface) also should have a way to specify keys that are only for the default VRF, this is done by --force-bind-key-ifindex without otherwise binding to a device. Signed-off-by: Leonard Crestez Reviewed-by: David Ahern Signed-off-by: David S. Miller --- tools/testing/selftests/net/fcnal-test.sh | 60 +++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 13350cd5c8ac..8e67a252b672 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -289,6 +289,12 @@ set_sysctl() run_cmd sysctl -q -w $* } +# get sysctl values in NS-A +get_sysctl() +{ + ${NSA_CMD} sysctl -n $* +} + ################################################################################ # Setup for tests @@ -1003,6 +1009,60 @@ ipv4_tcp_md5() run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET} log_test $? 1 "MD5: VRF: Device must be a VRF - prefix" + test_ipv4_md5_vrf__vrf_server__no_bind_ifindex + test_ipv4_md5_vrf__global_server__bind_ifindex0 +} + +test_ipv4_md5_vrf__vrf_server__no_bind_ifindex() +{ + log_start + show_hint "Simulates applications using VRF without TCP_MD5SIG_FLAG_IFINDEX" + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 0 "MD5: VRF: VRF-bound server, unbound key accepts connection" + + log_start + show_hint "Binding both the socket and the key is not required but it works" + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 0 "MD5: VRF: VRF-bound server, bound key accepts connection" +} + +test_ipv4_md5_vrf__global_server__bind_ifindex0() +{ + # This particular test needs tcp_l3mdev_accept=1 for Global server to accept VRF connections + local old_tcp_l3mdev_accept + old_tcp_l3mdev_accept=$(get_sysctl net.ipv4.tcp_l3mdev_accept) + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + + log_start + run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 2 "MD5: VRF: Global server, Key bound to ifindex=0 rejects VRF connection" + + log_start + run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 0 "MD5: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection" + log_start + + run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & + sleep 1 + run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts VRF connection" + + log_start + run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & + sleep 1 + run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} + log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts non-VRF connection" + + # restore value + set_sysctl net.ipv4.tcp_l3mdev_accept="$old_tcp_l3mdev_accept" } ipv4_tcp_novrf() -- cgit v1.2.3 From 9b4416c5095c20e110c82ae602c254099b83b72f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 15 Oct 2021 23:01:48 +1100 Subject: KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 90484425a1e6..ec57952b60b0 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -255,13 +255,15 @@ kvm_novcpu_exit: * r3 contains the SRR1 wakeup value, SRR1 is trashed. */ _GLOBAL(idle_kvm_start_guest) - ld r4,PACAEMERGSP(r13) mfcr r5 mflr r0 - std r1,0(r4) - std r5,8(r4) - std r0,16(r4) - subi r1,r4,STACK_FRAME_OVERHEAD + std r5, 8(r1) // Save CR in caller's frame + std r0, 16(r1) // Save LR in caller's frame + // Create frame on emergency stack + ld r4, PACAEMERGSP(r13) + stdu r1, -SWITCH_FRAME_SIZE(r4) + // Switch to new frame on emergency stack + mr r1, r4 SAVE_NVGPRS(r1) /* @@ -395,10 +397,9 @@ kvm_no_guest: /* set up r3 for return */ mfspr r3,SPRN_SRR1 REST_NVGPRS(r1) - addi r1, r1, STACK_FRAME_OVERHEAD - ld r0, 16(r1) - ld r5, 8(r1) - ld r1, 0(r1) + ld r1, 0(r1) // Switch back to caller stack + ld r0, 16(r1) // Reload LR + ld r5, 8(r1) // Reload CR mtlr r0 mtcr r5 blr -- cgit v1.2.3 From cdeb5d7d890e14f3b70e8087e745c4a6a7d9f337 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 15 Oct 2021 23:02:08 +1100 Subject: KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest We call idle_kvm_start_guest() from power7_offline() if the thread has been requested to enter KVM. We pass it the SRR1 value that was returned from power7_idle_insn() which tells us what sort of wakeup we're processing. Depending on the SRR1 value we pass in, the KVM code might enter the guest, or it might return to us to do some host action if the wakeup requires it. If idle_kvm_start_guest() is able to handle the wakeup, and enter the guest it is supposed to indicate that by returning a zero SRR1 value to us. That was the behaviour prior to commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C"), however in that commit the handling of SRR1 was reworked, and the zeroing behaviour was lost. Returning from idle_kvm_start_guest() without zeroing the SRR1 value can confuse the host offline code, causing the guest to crash and other weirdness. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index ec57952b60b0..eb776d0c5d8e 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -264,6 +264,7 @@ _GLOBAL(idle_kvm_start_guest) stdu r1, -SWITCH_FRAME_SIZE(r4) // Switch to new frame on emergency stack mr r1, r4 + std r3, 32(r1) // Save SRR1 wakeup value SAVE_NVGPRS(r1) /* @@ -315,6 +316,10 @@ kvm_unsplit_wakeup: kvm_secondary_got_guest: + // About to go to guest, clear saved SRR1 + li r0, 0 + std r0, 32(r1) + /* Set HSTATE_DSCR(r13) to something sensible */ ld r6, PACA_DSCR_DEFAULT(r13) std r6, HSTATE_DSCR(r13) @@ -394,8 +399,8 @@ kvm_no_guest: mfspr r4, SPRN_LPCR rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1 mtspr SPRN_LPCR, r4 - /* set up r3 for return */ - mfspr r3,SPRN_SRR1 + // Return SRR1 wakeup value, or 0 if we went into the guest + ld r3, 32(r1) REST_NVGPRS(r1) ld r1, 0(r1) // Switch back to caller stack ld r0, 16(r1) // Reload LR -- cgit v1.2.3 From 4bc59477c3298b191c72b5d99feb54a1dc8c254d Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 15 Oct 2021 17:14:02 +0900 Subject: ksmbd: limit read/write/trans buffer size not to exceed 8MB ksmbd limit read/write/trans buffer size not to exceed maximum 8MB. And set the minimum value of max response buffer size to 64KB. Windows client doesn't send session setup request if ksmbd set max trans/read/write size lower than 64KB in smb2 negotiate. It means windows allow at least 64 KB or more about this value. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2ops.c | 3 +++ fs/ksmbd/smb2pdu.c | 2 +- fs/ksmbd/smb2pdu.h | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ksmbd/smb2ops.c b/fs/ksmbd/smb2ops.c index b06456eb587b..fb6a65d23139 100644 --- a/fs/ksmbd/smb2ops.c +++ b/fs/ksmbd/smb2ops.c @@ -284,6 +284,7 @@ int init_smb3_11_server(struct ksmbd_conn *conn) void init_smb2_max_read_size(unsigned int sz) { + sz = clamp_val(sz, SMB3_MIN_IOSIZE, SMB3_MAX_IOSIZE); smb21_server_values.max_read_size = sz; smb30_server_values.max_read_size = sz; smb302_server_values.max_read_size = sz; @@ -292,6 +293,7 @@ void init_smb2_max_read_size(unsigned int sz) void init_smb2_max_write_size(unsigned int sz) { + sz = clamp_val(sz, SMB3_MIN_IOSIZE, SMB3_MAX_IOSIZE); smb21_server_values.max_write_size = sz; smb30_server_values.max_write_size = sz; smb302_server_values.max_write_size = sz; @@ -300,6 +302,7 @@ void init_smb2_max_write_size(unsigned int sz) void init_smb2_max_trans_size(unsigned int sz) { + sz = clamp_val(sz, SMB3_MIN_IOSIZE, SMB3_MAX_IOSIZE); smb21_server_values.max_trans_size = sz; smb30_server_values.max_trans_size = sz; smb302_server_values.max_trans_size = sz; diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 89c187aa8db2..7999d8bc6892 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -524,7 +524,7 @@ int smb2_allocate_rsp_buf(struct ksmbd_work *work) { struct smb2_hdr *hdr = work->request_buf; size_t small_sz = MAX_CIFS_SMALL_BUFFER_SIZE; - size_t large_sz = work->conn->vals->max_trans_size + MAX_SMB2_HDR_SIZE; + size_t large_sz = small_sz + work->conn->vals->max_trans_size; size_t sz = small_sz; int cmd = le16_to_cpu(hdr->Command); diff --git a/fs/ksmbd/smb2pdu.h b/fs/ksmbd/smb2pdu.h index a6dec5ec6a54..ff5a2f01d34a 100644 --- a/fs/ksmbd/smb2pdu.h +++ b/fs/ksmbd/smb2pdu.h @@ -113,6 +113,8 @@ #define SMB21_DEFAULT_IOSIZE (1024 * 1024) #define SMB3_DEFAULT_IOSIZE (4 * 1024 * 1024) #define SMB3_DEFAULT_TRANS_SIZE (1024 * 1024) +#define SMB3_MIN_IOSIZE (64 * 1024) +#define SMB3_MAX_IOSIZE (8 * 1024 * 1024) /* * SMB2 Header Definition -- cgit v1.2.3 From 2ea086e35c3d726a3bacd0a971c1f02a50e98206 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Fri, 15 Oct 2021 06:02:50 +0900 Subject: ksmbd: add buffer validation for smb direct Add buffer validation for smb direct. Acked-by: Namjae Jeon Signed-off-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/transport_rdma.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/fs/ksmbd/transport_rdma.c b/fs/ksmbd/transport_rdma.c index 3a7fa23ba850..a2fd5a4d4cd5 100644 --- a/fs/ksmbd/transport_rdma.c +++ b/fs/ksmbd/transport_rdma.c @@ -549,6 +549,10 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc) switch (recvmsg->type) { case SMB_DIRECT_MSG_NEGOTIATE_REQ: + if (wc->byte_len < sizeof(struct smb_direct_negotiate_req)) { + put_empty_recvmsg(t, recvmsg); + return; + } t->negotiation_requested = true; t->full_packet_received = true; wake_up_interruptible(&t->wait_status); @@ -556,10 +560,23 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc) case SMB_DIRECT_MSG_DATA_TRANSFER: { struct smb_direct_data_transfer *data_transfer = (struct smb_direct_data_transfer *)recvmsg->packet; - int data_length = le32_to_cpu(data_transfer->data_length); + unsigned int data_length; int avail_recvmsg_count, receive_credits; + if (wc->byte_len < + offsetof(struct smb_direct_data_transfer, padding)) { + put_empty_recvmsg(t, recvmsg); + return; + } + + data_length = le32_to_cpu(data_transfer->data_length); if (data_length) { + if (wc->byte_len < sizeof(struct smb_direct_data_transfer) + + (u64)data_length) { + put_empty_recvmsg(t, recvmsg); + return; + } + if (t->full_packet_received) recvmsg->first_segment = true; @@ -568,7 +585,7 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc) else t->full_packet_received = true; - enqueue_reassembly(t, recvmsg, data_length); + enqueue_reassembly(t, recvmsg, (int)data_length); wake_up_interruptible(&t->wait_reassembly_queue); spin_lock(&t->receive_credit_lock); -- cgit v1.2.3 From 7a33488705008b5bb5f8d95d05326dcc64fc55f4 Mon Sep 17 00:00:00 2001 From: Ralph Boehme Date: Fri, 15 Oct 2021 12:52:58 +0900 Subject: ksmbd: validate credit charge after validating SMB2 PDU body size smb2_validate_credit_charge() accesses fields in the SMB2 PDU body, but until smb2_calc_size() is called the PDU has not yet been verified to be large enough to access the PDU dynamic part length field. Acked-by: Namjae Jeon Signed-off-by: Ralph Boehme Signed-off-by: Steve French --- fs/ksmbd/smb2misc.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/fs/ksmbd/smb2misc.c b/fs/ksmbd/smb2misc.c index e7e441c8f050..030ca57c3784 100644 --- a/fs/ksmbd/smb2misc.c +++ b/fs/ksmbd/smb2misc.c @@ -400,26 +400,20 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) } } - if ((work->conn->vals->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU) && - smb2_validate_credit_charge(work->conn, hdr)) { - work->conn->ops->set_rsp_status(work, STATUS_INVALID_PARAMETER); - return 1; - } - if (smb2_calc_size(hdr, &clc_len)) return 1; if (len != clc_len) { /* client can return one byte more due to implied bcc[0] */ if (clc_len == len + 1) - return 0; + goto validate_credit; /* * Some windows servers (win2016) will pad also the final * PDU in a compound to 8 bytes. */ if (ALIGN(clc_len, 8) == len) - return 0; + goto validate_credit; /* * windows client also pad up to 8 bytes when compounding. @@ -432,7 +426,7 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) "cli req padded more than expected. Length %d not %d for cmd:%d mid:%llu\n", len, clc_len, command, le64_to_cpu(hdr->MessageId)); - return 0; + goto validate_credit; } ksmbd_debug(SMB, @@ -443,6 +437,13 @@ int ksmbd_smb2_check_message(struct ksmbd_work *work) return 1; } +validate_credit: + if ((work->conn->vals->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU) && + smb2_validate_credit_charge(work->conn, hdr)) { + work->conn->ops->set_rsp_status(work, STATUS_INVALID_PARAMETER); + return 1; + } + return 0; } -- cgit v1.2.3 From 0857d6f8c759d95f89d0436f86cdfd189ef99f20 Mon Sep 17 00:00:00 2001 From: Stephen Suryaputra Date: Thu, 14 Oct 2021 09:08:45 -0400 Subject: ipv6: When forwarding count rx stats on the orig netdev Commit bdb7cc643fc9 ("ipv6: Count interface receive statistics on the ingress netdev") does not work when ip6_forward() executes on the skbs with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one. Add a selftest script to verify. Fixes: bdb7cc643fc9 ("ipv6: Count interface receive statistics on the ingress netdev") Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv6/ip6_output.c | 3 +- tools/testing/selftests/net/forwarding/Makefile | 1 + .../net/forwarding/forwarding.config.sample | 2 + .../net/forwarding/ip6_forward_instats_vrf.sh | 172 +++++++++++++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 8 + 5 files changed, 185 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 12f985f43bcc..2f044a49afa8 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -464,13 +464,14 @@ static bool ip6_pkt_too_big(const struct sk_buff *skb, unsigned int mtu) int ip6_forward(struct sk_buff *skb) { - struct inet6_dev *idev = __in6_dev_get_safely(skb->dev); struct dst_entry *dst = skb_dst(skb); struct ipv6hdr *hdr = ipv6_hdr(skb); struct inet6_skb_parm *opt = IP6CB(skb); struct net *net = dev_net(dst->dev); + struct inet6_dev *idev; u32 mtu; + idev = __in6_dev_get_safely(dev_get_by_index_rcu(net, IP6CB(skb)->iif)); if (net->ipv6.devconf_all->forwarding == 0) goto error; diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index d97bd6889446..72ee644d47bf 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -9,6 +9,7 @@ TEST_PROGS = bridge_igmp.sh \ gre_inner_v4_multipath.sh \ gre_inner_v6_multipath.sh \ gre_multipath.sh \ + ip6_forward_instats_vrf.sh \ ip6gre_inner_v4_multipath.sh \ ip6gre_inner_v6_multipath.sh \ ipip_flat_gre_key.sh \ diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample index b802c14d2950..e5e2fbeca22e 100644 --- a/tools/testing/selftests/net/forwarding/forwarding.config.sample +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -39,3 +39,5 @@ NETIF_CREATE=yes # Timeout (in seconds) before ping exits regardless of how many packets have # been sent or received PING_TIMEOUT=5 +# IPv6 traceroute utility name. +TROUTE6=traceroute6 diff --git a/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh new file mode 100755 index 000000000000..9f5b3e2e5e95 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh @@ -0,0 +1,172 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test ipv6 stats on the incoming if when forwarding with VRF + +ALL_TESTS=" + ipv6_ping + ipv6_in_too_big_err + ipv6_in_hdr_err + ipv6_in_addr_err + ipv6_in_discard +" + +NUM_NETIFS=4 +source lib.sh + +h1_create() +{ + simple_if_init $h1 2001:1:1::2/64 + ip -6 route add vrf v$h1 2001:1:2::/64 via 2001:1:1::1 +} + +h1_destroy() +{ + ip -6 route del vrf v$h1 2001:1:2::/64 via 2001:1:1::1 + simple_if_fini $h1 2001:1:1::2/64 +} + +router_create() +{ + vrf_create router + __simple_if_init $rtr1 router 2001:1:1::1/64 + __simple_if_init $rtr2 router 2001:1:2::1/64 + mtu_set $rtr2 1280 +} + +router_destroy() +{ + mtu_restore $rtr2 + __simple_if_fini $rtr2 2001:1:2::1/64 + __simple_if_fini $rtr1 2001:1:1::1/64 + vrf_destroy router +} + +h2_create() +{ + simple_if_init $h2 2001:1:2::2/64 + ip -6 route add vrf v$h2 2001:1:1::/64 via 2001:1:2::1 + mtu_set $h2 1280 +} + +h2_destroy() +{ + mtu_restore $h2 + ip -6 route del vrf v$h2 2001:1:1::/64 via 2001:1:2::1 + simple_if_fini $h2 2001:1:2::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rtr1=${NETIFS[p2]} + + rtr2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + h1_create + router_create + h2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + h2_destroy + router_destroy + h1_destroy + vrf_cleanup +} + +ipv6_in_too_big_err() +{ + RET=0 + + local t0=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors) + local vrf_name=$(master_name_get $h1) + + # Send too big packets + ip vrf exec $vrf_name \ + $PING6 -s 1300 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null + + local t1=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors) + test "$((t1 - t0))" -ne 0 + check_err $? + log_test "Ip6InTooBigErrors" +} + +ipv6_in_hdr_err() +{ + RET=0 + + local t0=$(ipv6_stats_get $rtr1 Ip6InHdrErrors) + local vrf_name=$(master_name_get $h1) + + # Send packets with hop limit 1, easiest with traceroute6 as some ping6 + # doesn't allow hop limit to be specified + ip vrf exec $vrf_name \ + $TROUTE6 2001:1:2::2 &> /dev/null + + local t1=$(ipv6_stats_get $rtr1 Ip6InHdrErrors) + test "$((t1 - t0))" -ne 0 + check_err $? + log_test "Ip6InHdrErrors" +} + +ipv6_in_addr_err() +{ + RET=0 + + local t0=$(ipv6_stats_get $rtr1 Ip6InAddrErrors) + local vrf_name=$(master_name_get $h1) + + # Disable forwarding temporary while sending the packet + sysctl -qw net.ipv6.conf.all.forwarding=0 + ip vrf exec $vrf_name \ + $PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null + sysctl -qw net.ipv6.conf.all.forwarding=1 + + local t1=$(ipv6_stats_get $rtr1 Ip6InAddrErrors) + test "$((t1 - t0))" -ne 0 + check_err $? + log_test "Ip6InAddrErrors" +} + +ipv6_in_discard() +{ + RET=0 + + local t0=$(ipv6_stats_get $rtr1 Ip6InDiscards) + local vrf_name=$(master_name_get $h1) + + # Add a policy to discard + ip xfrm policy add dst 2001:1:2::2/128 dir fwd action block + ip vrf exec $vrf_name \ + $PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null + ip xfrm policy del dst 2001:1:2::2/128 dir fwd + + local t1=$(ipv6_stats_get $rtr1 Ip6InDiscards) + test "$((t1 - t0))" -ne 0 + check_err $? + log_test "Ip6InDiscards" +} +ipv6_ping() +{ + RET=0 + + ping6_test $h1 2001:1:2::2 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index e7fc5c35b569..92087d423bcf 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -751,6 +751,14 @@ qdisc_parent_stats_get() | jq '.[] | select(.parent == "'"$parent"'") | '"$selector" } +ipv6_stats_get() +{ + local dev=$1; shift + local stat=$1; shift + + cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2 +} + humanize() { local speed=$1; shift -- cgit v1.2.3 From fbd63c08cdcca5fb1315aca3172b3c9c272cfb4f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 24 Sep 2021 00:35:42 +0000 Subject: csky: don't let sigreturn play with priveleged bits of status register csky restore_sigcontext() blindly overwrites regs->sr with the value it finds in sigcontext. Attacker can store whatever they want in there, which includes things like S-bit. Userland shouldn't be able to set that, or anything other than C flag (bit 0). Do the same thing other architectures with protected bits in flags register do - preserve everything that shouldn't be settable in user mode, picking the rest from the value saved is sigcontext. Signed-off-by: Al Viro Signed-off-by: Guo Ren Cc: stable@vger.kernel.org --- arch/csky/kernel/signal.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c index bc4238b9f709..c7b763d2f526 100644 --- a/arch/csky/kernel/signal.c +++ b/arch/csky/kernel/signal.c @@ -52,10 +52,14 @@ static long restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) { int err = 0; + unsigned long sr = regs->sr; /* sc_pt_regs is structured the same as the start of pt_regs */ err |= __copy_from_user(regs, &sc->sc_pt_regs, sizeof(struct pt_regs)); + /* BIT(0) of regs->sr is Condition Code/Carry bit */ + regs->sr = (sr & ~1) | (regs->sr & 1); + /* Restore the floating-point state. */ err |= restore_fpu_state(sc); -- cgit v1.2.3 From af89ebaa64de726ca0a39bbb0bf0c81a1f43ad50 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Fri, 24 Sep 2021 15:33:38 +0800 Subject: csky: Fixup regs.sr broken in ptrace gpr_get() return the entire pt_regs (include sr) to userspace, if we don't restore the C bit in gpr_set, it may break the ALU result in that context. So the C flag bit is part of gpr context, that's why riscv totally remove the C bit in the ISA. That makes sr reg clear from userspace to supervisor privilege. Signed-off-by: Guo Ren Cc: Al Viro Cc: stable@vger.kernel.org --- arch/csky/kernel/ptrace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c index 0105ac81b432..1a5f54e0d272 100644 --- a/arch/csky/kernel/ptrace.c +++ b/arch/csky/kernel/ptrace.c @@ -99,7 +99,8 @@ static int gpr_set(struct task_struct *target, if (ret) return ret; - regs.sr = task_pt_regs(target)->sr; + /* BIT(0) of regs.sr is Condition Code/Carry bit */ + regs.sr = (regs.sr & BIT(0)) | (task_pt_regs(target)->sr & ~BIT(0)); #ifdef CONFIG_CPU_HAS_HILO regs.dcsr = task_pt_regs(target)->dcsr; #endif -- cgit v1.2.3 From aeba0b84dd07a9e6b362395f5ad47091249db13d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Sep 2021 21:38:36 -0700 Subject: csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it Compiling csky:allmodconfig with an upstream C compiler results in the following error. csky-linux-gcc: error: unrecognized command-line option '-mbacktrace'; did you mean '-fbacktrace'? Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to avoid the error. Signed-off-by: Guenter Roeck Signed-off-by: Guo Ren --- arch/csky/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig index 9d4d898df76b..58ca3ef02bab 100644 --- a/arch/csky/Kconfig +++ b/arch/csky/Kconfig @@ -8,7 +8,7 @@ config CSKY select ARCH_HAS_SYNC_DMA_FOR_DEVICE select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_QUEUED_RWLOCKS - select ARCH_WANT_FRAME_POINTERS if !CPU_CK610 + select ARCH_WANT_FRAME_POINTERS if !CPU_CK610 && $(cc-option,-mbacktrace) select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT select COMMON_CLK select CLKSRC_MMIO -- cgit v1.2.3 From fb5d69a5cd7865a733c2c1f26e2e3b75f59ce00d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Sep 2021 21:38:37 -0700 Subject: csky: bitops: Remove duplicate __clear_bit define Building csky:allmodconfig results in the following build error. In file included from ./include/linux/bitops.h:33, from ./include/linux/log2.h:12, from kernel/bounds.c:13: ./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined Since commit 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers"), __clear_bit is defined in include/asm-generic/bitops/non-atomic.h, and the define in the csky include file is no longer necessary or useful. Remove it. Fixes: 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers") Signed-off-by: Guenter Roeck Signed-off-by: Guo Ren --- arch/csky/include/asm/bitops.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/csky/include/asm/bitops.h b/arch/csky/include/asm/bitops.h index 91818787d860..02b72a000767 100644 --- a/arch/csky/include/asm/bitops.h +++ b/arch/csky/include/asm/bitops.h @@ -74,7 +74,6 @@ static __always_inline unsigned long __fls(unsigned long x) * bug fix, why only could use atomic!!!! */ #include -#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr) #include #include -- cgit v1.2.3 From e21e52ad1e0126e2a5e2013084ac3f47cf1e887a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Sep 2021 21:38:38 -0700 Subject: csky: Make HAVE_TCM depend on !COMPILE_TEST Building csky:allmodconfig results in the following build errors. arch/csky/mm/tcm.c:9:2: error: #error "You should define ITCM_RAM_BASE" 9 | #error "You should define ITCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:14:2: error: #error "You should define DTCM_RAM_BASE" 14 | #error "You should define DTCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:18:2: error: #error "You should define correct DTCM_RAM_BASE" 18 | #error "You should define correct DTCM_RAM_BASE" This is seen with compile tests since those enable HAVE_TCM, but do not provide useful default values for ITCM_RAM_BASE or DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid the error. Signed-off-by: Guenter Roeck Signed-off-by: Guo Ren --- arch/csky/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig index 58ca3ef02bab..823d3d5a9e11 100644 --- a/arch/csky/Kconfig +++ b/arch/csky/Kconfig @@ -241,6 +241,7 @@ endchoice menuconfig HAVE_TCM bool "Tightly-Coupled/Sram Memory" + depends on !COMPILE_TEST help The implementation are not only used by TCM (Tightly-Coupled Meory) but also used by sram on SOC bus. It follow existed linux tcm -- cgit v1.2.3 From ba95a6225b02c24d99f39fd930b6a388e5fd7b48 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Thu, 14 Oct 2021 17:20:45 +0200 Subject: vsock_diag_test: remove free_sock_stat() call in test_no_sockets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In `test_no_sockets` we don't expect any sockets, indeed check_no_sockets() prints an error and exits if `sockets` list is not empty, so free_sock_stat() call is unnecessary since it would only be called when the `sockets` list is empty. This was discovered by a strange warning printed by gcc v11.2.1: In file included from ../../include/linux/list.h:7, from vsock_diag_test.c:18: vsock_diag_test.c: In function ‘test_no_sockets’: ../../include/linux/kernel.h:35:45: error: array subscript ‘struct vsock_stat[0]’ is partly outside array bound s of ‘struct list_head[1]’ [-Werror=array-bounds] 35 | const typeof(((type *)0)->member) * __mptr = (ptr); \ | ^~~~~~ ../../include/linux/list.h:352:9: note: in expansion of macro ‘container_of’ 352 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ../../include/linux/list.h:393:9: note: in expansion of macro ‘list_entry’ 393 | list_entry((pos)->member.next, typeof(*(pos)), member) | ^~~~~~~~~~ ../../include/linux/list.h:522:21: note: in expansion of macro ‘list_next_entry’ 522 | n = list_next_entry(pos, member); \ | ^~~~~~~~~~~~~~~ vsock_diag_test.c:325:9: note: in expansion of macro ‘list_for_each_entry_safe’ 325 | list_for_each_entry_safe(st, next, sockets, list) { | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from vsock_diag_test.c:18: vsock_diag_test.c:333:19: note: while referencing ‘sockets’ 333 | LIST_HEAD(sockets); | ^~~~~~~ ../../include/linux/list.h:23:26: note: in definition of macro ‘LIST_HEAD’ 23 | struct list_head name = LIST_HEAD_INIT(name) It seems related to some compiler optimization and assumption about the empty `sockets` list, since this warning is printed only with -02 or -O3. Also removing `exit(1)` from check_no_sockets() makes the warning disappear since in that case free_sock_stat() can be reached also when the list is not empty. Reported-by: Marc-André Lureau Signed-off-by: Stefano Garzarella Link: https://lore.kernel.org/r/20211014152045.173872-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski --- tools/testing/vsock/vsock_diag_test.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/testing/vsock/vsock_diag_test.c b/tools/testing/vsock/vsock_diag_test.c index cec6f5a738e1..fa927ad16f8a 100644 --- a/tools/testing/vsock/vsock_diag_test.c +++ b/tools/testing/vsock/vsock_diag_test.c @@ -332,8 +332,6 @@ static void test_no_sockets(const struct test_opts *opts) read_vsock_stat(&sockets); check_no_sockets(&sockets); - - free_sock_stat(&sockets); } static void test_listen_socket_server(const struct test_opts *opts) -- cgit v1.2.3 From c3ca31ce0ea1e1ae34748ded54b6ccc319e7ed20 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 15 Oct 2021 10:43:35 -0700 Subject: ARC: fix potential build snafu In the big pgtable header split, I inadvertently introduced a couple of duplicate symbols. Fixes: fe6cb7b043b69cd9 ("ARC: mm: disintegrate pgtable.h into levels and flags") Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 9320b04c04bf..4cf45a99fd79 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -26,11 +26,6 @@ extern char empty_zero_page[PAGE_SIZE]; extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE); -/* Macro to mark a page protection as uncacheable */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE)) - -extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE); - /* to cope with aliasing VIPT cache */ #define HAVE_ARCH_UNMAPPED_AREA -- cgit v1.2.3 From be358af1191b1b2fedebd8f3421cafdc8edacc7d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 14 Oct 2021 14:35:07 -0400 Subject: nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of: Error: invalid operands (*UND* and *UND* sections) for `^' issues with various files. Those files were temporary asm files that looked like: kernel/.tmp_mc_fork.s I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further. The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_.s". The problem here is that the objdump produced by the nds32 object file, contains things that look like: 0000159a <.L3^B1>: 159a: c6 00 beqz38 $r6, 159a <.L3^B1> 159a: R_NDS32_9_PCREL_RELA .text+0x159e 159c: 84 d2 movi55 $r6, #-14 159e: 80 06 mov55 $r0, $r6 15a0: ec 3c addi10.sp #0x3c Where ".L3^B1 is somehow selected as the "global" variable to index off of. Then the assembly file that holds the mcount locations looks like this: .section __mcount_loc,"a",@progbits .align 2 .long .L3^B1 + -5522 .long .L3^B1 + -5384 .long .L3^B1 + -5270 .long .L3^B1 + -5098 .long .L3^B1 + -4970 .long .L3^B1 + -4758 .long .L3^B1 + -4122 [...] And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol. Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name. Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Greentime Hu Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support") Signed-off-by: Steven Rostedt (VMware) --- scripts/recordmcount.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 8f6b13ae46bf..7d631aaa0ae1 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -189,7 +189,7 @@ if ($arch =~ /(x86(_64)?)|(i386)/) { $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)"; $weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)"; $section_regex = "Disassembly of section\\s+(\\S+):"; -$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:"; +$function_regex = "^([0-9a-fA-F]+)\\s+<([^^]*?)>:"; $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s(mcount|__fentry__)\$"; $section_type = '@progbits'; $mcount_adjust = 0; -- cgit v1.2.3 From cc9c884dd7f4f036965e23f5445f838db316eb46 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Sep 2021 09:12:37 +0200 Subject: block: call submit_bio_checks under q_usage_counter Ensure all bios check the current values of the queue under freeze protection, i.e. to make sure the zero capacity set by del_gendisk is actually seen before dispatching to the driver. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/blk-core.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 5454db2fa263..c071f1a90b10 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -899,11 +899,18 @@ static blk_qc_t __submit_bio(struct bio *bio) struct gendisk *disk = bio->bi_bdev->bd_disk; blk_qc_t ret = BLK_QC_T_NONE; - if (blk_crypto_bio_prep(&bio)) { - if (!disk->fops->submit_bio) - return blk_mq_submit_bio(bio); + if (unlikely(bio_queue_enter(bio) != 0)) + return BLK_QC_T_NONE; + + if (!submit_bio_checks(bio) || !blk_crypto_bio_prep(&bio)) + goto queue_exit; + if (disk->fops->submit_bio) { ret = disk->fops->submit_bio(bio); + goto queue_exit; } + return blk_mq_submit_bio(bio); + +queue_exit: blk_queue_exit(disk->queue); return ret; } @@ -941,9 +948,6 @@ static blk_qc_t __submit_bio_noacct(struct bio *bio) struct request_queue *q = bio->bi_bdev->bd_disk->queue; struct bio_list lower, same; - if (unlikely(bio_queue_enter(bio) != 0)) - continue; - /* * Create a fresh bio_list for all subordinate requests. */ @@ -979,23 +983,12 @@ static blk_qc_t __submit_bio_noacct(struct bio *bio) static blk_qc_t __submit_bio_noacct_mq(struct bio *bio) { struct bio_list bio_list[2] = { }; - blk_qc_t ret = BLK_QC_T_NONE; + blk_qc_t ret; current->bio_list = bio_list; do { - struct gendisk *disk = bio->bi_bdev->bd_disk; - - if (unlikely(bio_queue_enter(bio) != 0)) - continue; - - if (!blk_crypto_bio_prep(&bio)) { - blk_queue_exit(disk->queue); - ret = BLK_QC_T_NONE; - continue; - } - - ret = blk_mq_submit_bio(bio); + ret = __submit_bio(bio); } while ((bio = bio_list_pop(&bio_list[0]))); current->bio_list = NULL; @@ -1013,9 +1006,6 @@ static blk_qc_t __submit_bio_noacct_mq(struct bio *bio) */ blk_qc_t submit_bio_noacct(struct bio *bio) { - if (!submit_bio_checks(bio)) - return BLK_QC_T_NONE; - /* * We only want one ->submit_bio to be active at a time, else stack * usage with stacked devices could be a problem. Use current->bio_list -- cgit v1.2.3 From 1f14a0989073459c2be6b5c7b3fb7f9f3d7fa2af Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Sep 2021 09:12:38 +0200 Subject: block: factor out a blk_try_enter_queue helper Factor out the code to try to get q_usage_counter without blocking into a separate helper. Both to improve code readability and to prepare for splitting bio_queue_enter from blk_queue_enter. Signed-off-by: Christoph Hellwig Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/blk-core.c | 60 ++++++++++++++++++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 28 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index c071f1a90b10..7e9eadacf2de 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -416,6 +416,30 @@ void blk_cleanup_queue(struct request_queue *q) } EXPORT_SYMBOL(blk_cleanup_queue); +static bool blk_try_enter_queue(struct request_queue *q, bool pm) +{ + rcu_read_lock(); + if (!percpu_ref_tryget_live(&q->q_usage_counter)) + goto fail; + + /* + * The code that increments the pm_only counter must ensure that the + * counter is globally visible before the queue is unfrozen. + */ + if (blk_queue_pm_only(q) && + (!pm || queue_rpm_status(q) == RPM_SUSPENDED)) + goto fail_put; + + rcu_read_unlock(); + return true; + +fail_put: + percpu_ref_put(&q->q_usage_counter); +fail: + rcu_read_unlock(); + return false; +} + /** * blk_queue_enter() - try to increase q->q_usage_counter * @q: request queue pointer @@ -425,40 +449,18 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags) { const bool pm = flags & BLK_MQ_REQ_PM; - while (true) { - bool success = false; - - rcu_read_lock(); - if (percpu_ref_tryget_live(&q->q_usage_counter)) { - /* - * The code that increments the pm_only counter is - * responsible for ensuring that that counter is - * globally visible before the queue is unfrozen. - */ - if ((pm && queue_rpm_status(q) != RPM_SUSPENDED) || - !blk_queue_pm_only(q)) { - success = true; - } else { - percpu_ref_put(&q->q_usage_counter); - } - } - rcu_read_unlock(); - - if (success) - return 0; - + while (!blk_try_enter_queue(q, pm)) { if (flags & BLK_MQ_REQ_NOWAIT) return -EBUSY; /* - * read pair of barrier in blk_freeze_queue_start(), - * we need to order reading __PERCPU_REF_DEAD flag of - * .q_usage_counter and reading .mq_freeze_depth or - * queue dying flag, otherwise the following wait may - * never return if the two reads are reordered. + * read pair of barrier in blk_freeze_queue_start(), we need to + * order reading __PERCPU_REF_DEAD flag of .q_usage_counter and + * reading .mq_freeze_depth or queue dying flag, otherwise the + * following wait may never return if the two reads are + * reordered. */ smp_rmb(); - wait_event(q->mq_freeze_wq, (!q->mq_freeze_depth && blk_pm_resume_queue(pm, q)) || @@ -466,6 +468,8 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags) if (blk_queue_dying(q)) return -ENODEV; } + + return 0; } static inline int bio_queue_enter(struct bio *bio) -- cgit v1.2.3 From a6741536f44ae65491cfde6870ae518aabe1ca36 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Sep 2021 09:12:39 +0200 Subject: block: split bio_queue_enter from blk_queue_enter To prepare for fixing a gendisk shutdown race, open code the blk_queue_enter logic in bio_queue_enter. This also removes the pointless flags translation. Signed-off-by: Christoph Hellwig Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/blk-core.c | 33 +++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 7e9eadacf2de..43f5da707d8e 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -475,18 +475,35 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags) static inline int bio_queue_enter(struct bio *bio) { struct request_queue *q = bio->bi_bdev->bd_disk->queue; - bool nowait = bio->bi_opf & REQ_NOWAIT; - int ret; - ret = blk_queue_enter(q, nowait ? BLK_MQ_REQ_NOWAIT : 0); - if (unlikely(ret)) { - if (nowait && !blk_queue_dying(q)) + while (!blk_try_enter_queue(q, false)) { + if (bio->bi_opf & REQ_NOWAIT) { + if (blk_queue_dying(q)) + goto dead; bio_wouldblock_error(bio); - else - bio_io_error(bio); + return -EBUSY; + } + + /* + * read pair of barrier in blk_freeze_queue_start(), we need to + * order reading __PERCPU_REF_DEAD flag of .q_usage_counter and + * reading .mq_freeze_depth or queue dying flag, otherwise the + * following wait may never return if the two reads are + * reordered. + */ + smp_rmb(); + wait_event(q->mq_freeze_wq, + (!q->mq_freeze_depth && + blk_pm_resume_queue(false, q)) || + blk_queue_dying(q)); + if (blk_queue_dying(q)) + goto dead; } - return ret; + return 0; +dead: + bio_io_error(bio); + return -ENODEV; } void blk_queue_exit(struct request_queue *q) -- cgit v1.2.3 From 8e141f9eb803e209714a80aa6ec073893f94c526 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Sep 2021 09:12:40 +0200 Subject: block: drain file system I/O on del_gendisk Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk") Reported-by: Ming Lei Signed-off-by: Christoph Hellwig Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/blk-core.c | 27 ++++++++++++--------------- block/blk.h | 1 + block/genhd.c | 21 +++++++++++++++++++++ include/linux/genhd.h | 1 + 4 files changed, 35 insertions(+), 15 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 43f5da707d8e..4d8f5fe91588 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -49,7 +49,6 @@ #include "blk-mq.h" #include "blk-mq-sched.h" #include "blk-pm.h" -#include "blk-rq-qos.h" struct dentry *blk_debugfs_root; @@ -337,23 +336,25 @@ void blk_put_queue(struct request_queue *q) } EXPORT_SYMBOL(blk_put_queue); -void blk_set_queue_dying(struct request_queue *q) +void blk_queue_start_drain(struct request_queue *q) { - blk_queue_flag_set(QUEUE_FLAG_DYING, q); - /* * When queue DYING flag is set, we need to block new req * entering queue, so we call blk_freeze_queue_start() to * prevent I/O from crossing blk_queue_enter(). */ blk_freeze_queue_start(q); - if (queue_is_mq(q)) blk_mq_wake_waiters(q); - /* Make blk_queue_enter() reexamine the DYING flag. */ wake_up_all(&q->mq_freeze_wq); } + +void blk_set_queue_dying(struct request_queue *q) +{ + blk_queue_flag_set(QUEUE_FLAG_DYING, q); + blk_queue_start_drain(q); +} EXPORT_SYMBOL_GPL(blk_set_queue_dying); /** @@ -385,13 +386,8 @@ void blk_cleanup_queue(struct request_queue *q) */ blk_freeze_queue(q); - rq_qos_exit(q); - blk_queue_flag_set(QUEUE_FLAG_DEAD, q); - /* for synchronous bio-based driver finish in-flight integrity i/o */ - blk_flush_integrity(); - blk_sync_queue(q); if (queue_is_mq(q)) blk_mq_exit_queue(q); @@ -474,11 +470,12 @@ int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags) static inline int bio_queue_enter(struct bio *bio) { - struct request_queue *q = bio->bi_bdev->bd_disk->queue; + struct gendisk *disk = bio->bi_bdev->bd_disk; + struct request_queue *q = disk->queue; while (!blk_try_enter_queue(q, false)) { if (bio->bi_opf & REQ_NOWAIT) { - if (blk_queue_dying(q)) + if (test_bit(GD_DEAD, &disk->state)) goto dead; bio_wouldblock_error(bio); return -EBUSY; @@ -495,8 +492,8 @@ static inline int bio_queue_enter(struct bio *bio) wait_event(q->mq_freeze_wq, (!q->mq_freeze_depth && blk_pm_resume_queue(false, q)) || - blk_queue_dying(q)); - if (blk_queue_dying(q)) + test_bit(GD_DEAD, &disk->state)); + if (test_bit(GD_DEAD, &disk->state)) goto dead; } diff --git a/block/blk.h b/block/blk.h index 7d2a0ba7ed21..e2ed2257709a 100644 --- a/block/blk.h +++ b/block/blk.h @@ -51,6 +51,7 @@ struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size, void blk_free_flush_queue(struct blk_flush_queue *q); void blk_freeze_queue(struct request_queue *q); +void blk_queue_start_drain(struct request_queue *q); #define BIO_INLINE_VECS 4 struct bio_vec *bvec_alloc(mempool_t *pool, unsigned short *nr_vecs, diff --git a/block/genhd.c b/block/genhd.c index 496e8458c357..1fe816be9bcd 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -26,6 +26,7 @@ #include #include "blk.h" +#include "blk-rq-qos.h" static struct kobject *block_depr; @@ -559,6 +560,8 @@ EXPORT_SYMBOL(device_add_disk); */ void del_gendisk(struct gendisk *disk) { + struct request_queue *q = disk->queue; + might_sleep(); if (WARN_ON_ONCE(!disk_live(disk) && !(disk->flags & GENHD_FL_HIDDEN))) @@ -575,8 +578,26 @@ void del_gendisk(struct gendisk *disk) fsync_bdev(disk->part0); __invalidate_device(disk->part0, true); + /* + * Fail any new I/O. + */ + set_bit(GD_DEAD, &disk->state); set_capacity(disk, 0); + /* + * Prevent new I/O from crossing bio_queue_enter(). + */ + blk_queue_start_drain(q); + blk_mq_freeze_queue_wait(q); + + rq_qos_exit(q); + blk_sync_queue(q); + blk_flush_integrity(); + /* + * Allow using passthrough request again after the queue is torn down. + */ + blk_mq_unfreeze_queue(q); + if (!(disk->flags & GENHD_FL_HIDDEN)) { sysfs_remove_link(&disk_to_dev(disk)->kobj, "bdi"); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index c68d83c87f83..0f5315c2b5a3 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -149,6 +149,7 @@ struct gendisk { unsigned long state; #define GD_NEED_PART_SCAN 0 #define GD_READ_ONLY 1 +#define GD_DEAD 2 struct mutex open_mutex; /* open/close mutex */ unsigned open_partitions; /* number of open partitions */ -- cgit v1.2.3 From aec89dc5d421200b353d99a2bfff9e0967f67037 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Sep 2021 09:12:41 +0200 Subject: block: keep q_usage_counter in atomic mode after del_gendisk Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by: Ming Lei Signed-off-by: Christoph Hellwig Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/blk-mq.c | 9 ++++++++- block/blk.h | 1 + block/genhd.c | 3 ++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 108a352051be..bc026372de43 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -188,9 +188,11 @@ void blk_mq_freeze_queue(struct request_queue *q) } EXPORT_SYMBOL_GPL(blk_mq_freeze_queue); -void blk_mq_unfreeze_queue(struct request_queue *q) +void __blk_mq_unfreeze_queue(struct request_queue *q, bool force_atomic) { mutex_lock(&q->mq_freeze_lock); + if (force_atomic) + q->q_usage_counter.data->force_atomic = true; q->mq_freeze_depth--; WARN_ON_ONCE(q->mq_freeze_depth < 0); if (!q->mq_freeze_depth) { @@ -199,6 +201,11 @@ void blk_mq_unfreeze_queue(struct request_queue *q) } mutex_unlock(&q->mq_freeze_lock); } + +void blk_mq_unfreeze_queue(struct request_queue *q) +{ + __blk_mq_unfreeze_queue(q, false); +} EXPORT_SYMBOL_GPL(blk_mq_unfreeze_queue); /* diff --git a/block/blk.h b/block/blk.h index e2ed2257709a..6c3c00a8fe19 100644 --- a/block/blk.h +++ b/block/blk.h @@ -51,6 +51,7 @@ struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size, void blk_free_flush_queue(struct blk_flush_queue *q); void blk_freeze_queue(struct request_queue *q); +void __blk_mq_unfreeze_queue(struct request_queue *q, bool force_atomic); void blk_queue_start_drain(struct request_queue *q); #define BIO_INLINE_VECS 4 diff --git a/block/genhd.c b/block/genhd.c index 1fe816be9bcd..7a766cc613c7 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -596,7 +596,8 @@ void del_gendisk(struct gendisk *disk) /* * Allow using passthrough request again after the queue is torn down. */ - blk_mq_unfreeze_queue(q); + blk_queue_flag_clear(QUEUE_FLAG_INIT_DONE, q); + __blk_mq_unfreeze_queue(q, true); if (!(disk->flags & GENHD_FL_HIDDEN)) { sysfs_remove_link(&disk_to_dev(disk)->kobj, "bdi"); -- cgit v1.2.3 From c41108049d143304faf06852c7181262b7b0d242 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Oct 2021 11:33:01 +0200 Subject: kyber: avoid q->disk dereferences in trace points q->disk becomes invalid after the gendisk is removed. Work around this by caching the dev_t for the tracepoints. The real fix would be to properly tear down the I/O schedulers with the gendisk, but that is a much more invasive change. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de Tested-by: Yi Zhang Signed-off-by: Jens Axboe --- block/kyber-iosched.c | 10 ++++++---- include/trace/events/kyber.h | 19 +++++++++---------- 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c index 15a8be57203d..a0ffbabfac2c 100644 --- a/block/kyber-iosched.c +++ b/block/kyber-iosched.c @@ -151,6 +151,7 @@ struct kyber_ctx_queue { struct kyber_queue_data { struct request_queue *q; + dev_t dev; /* * Each scheduling domain has a limited number of in-flight requests @@ -257,7 +258,7 @@ static int calculate_percentile(struct kyber_queue_data *kqd, } memset(buckets, 0, sizeof(kqd->latency_buckets[sched_domain][type])); - trace_kyber_latency(kqd->q, kyber_domain_names[sched_domain], + trace_kyber_latency(kqd->dev, kyber_domain_names[sched_domain], kyber_latency_type_names[type], percentile, bucket + 1, 1 << KYBER_LATENCY_SHIFT, samples); @@ -270,7 +271,7 @@ static void kyber_resize_domain(struct kyber_queue_data *kqd, depth = clamp(depth, 1U, kyber_depth[sched_domain]); if (depth != kqd->domain_tokens[sched_domain].sb.depth) { sbitmap_queue_resize(&kqd->domain_tokens[sched_domain], depth); - trace_kyber_adjust(kqd->q, kyber_domain_names[sched_domain], + trace_kyber_adjust(kqd->dev, kyber_domain_names[sched_domain], depth); } } @@ -366,6 +367,7 @@ static struct kyber_queue_data *kyber_queue_data_alloc(struct request_queue *q) goto err; kqd->q = q; + kqd->dev = disk_devt(q->disk); kqd->cpu_latency = alloc_percpu_gfp(struct kyber_cpu_latency, GFP_KERNEL | __GFP_ZERO); @@ -774,7 +776,7 @@ kyber_dispatch_cur_domain(struct kyber_queue_data *kqd, list_del_init(&rq->queuelist); return rq; } else { - trace_kyber_throttled(kqd->q, + trace_kyber_throttled(kqd->dev, kyber_domain_names[khd->cur_domain]); } } else if (sbitmap_any_bit_set(&khd->kcq_map[khd->cur_domain])) { @@ -787,7 +789,7 @@ kyber_dispatch_cur_domain(struct kyber_queue_data *kqd, list_del_init(&rq->queuelist); return rq; } else { - trace_kyber_throttled(kqd->q, + trace_kyber_throttled(kqd->dev, kyber_domain_names[khd->cur_domain]); } } diff --git a/include/trace/events/kyber.h b/include/trace/events/kyber.h index 491098a0d8ed..bf7533f171ff 100644 --- a/include/trace/events/kyber.h +++ b/include/trace/events/kyber.h @@ -13,11 +13,11 @@ TRACE_EVENT(kyber_latency, - TP_PROTO(struct request_queue *q, const char *domain, const char *type, + TP_PROTO(dev_t dev, const char *domain, const char *type, unsigned int percentile, unsigned int numerator, unsigned int denominator, unsigned int samples), - TP_ARGS(q, domain, type, percentile, numerator, denominator, samples), + TP_ARGS(dev, domain, type, percentile, numerator, denominator, samples), TP_STRUCT__entry( __field( dev_t, dev ) @@ -30,7 +30,7 @@ TRACE_EVENT(kyber_latency, ), TP_fast_assign( - __entry->dev = disk_devt(q->disk); + __entry->dev = dev; strlcpy(__entry->domain, domain, sizeof(__entry->domain)); strlcpy(__entry->type, type, sizeof(__entry->type)); __entry->percentile = percentile; @@ -47,10 +47,9 @@ TRACE_EVENT(kyber_latency, TRACE_EVENT(kyber_adjust, - TP_PROTO(struct request_queue *q, const char *domain, - unsigned int depth), + TP_PROTO(dev_t dev, const char *domain, unsigned int depth), - TP_ARGS(q, domain, depth), + TP_ARGS(dev, domain, depth), TP_STRUCT__entry( __field( dev_t, dev ) @@ -59,7 +58,7 @@ TRACE_EVENT(kyber_adjust, ), TP_fast_assign( - __entry->dev = disk_devt(q->disk); + __entry->dev = dev; strlcpy(__entry->domain, domain, sizeof(__entry->domain)); __entry->depth = depth; ), @@ -71,9 +70,9 @@ TRACE_EVENT(kyber_adjust, TRACE_EVENT(kyber_throttled, - TP_PROTO(struct request_queue *q, const char *domain), + TP_PROTO(dev_t dev, const char *domain), - TP_ARGS(q, domain), + TP_ARGS(dev, domain), TP_STRUCT__entry( __field( dev_t, dev ) @@ -81,7 +80,7 @@ TRACE_EVENT(kyber_throttled, ), TP_fast_assign( - __entry->dev = disk_devt(q->disk); + __entry->dev = dev; strlcpy(__entry->domain, domain, sizeof(__entry->domain)); ), -- cgit v1.2.3 From d997cc1715df7b6c3df798881fb9941acf0079f8 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 15 Oct 2021 21:19:33 -0700 Subject: Input: snvs_pwrkey - add clk handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/snvs_pwrkey.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c index 2f5e3ab5ed63..65286762b02a 100644 --- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -3,6 +3,7 @@ // Driver for the IMX SNVS ON/OFF Power Key // Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved. +#include #include #include #include @@ -99,6 +100,11 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static void imx_snvs_pwrkey_disable_clk(void *data) +{ + clk_disable_unprepare(data); +} + static void imx_snvs_pwrkey_act(void *pdata) { struct pwrkey_drv_data *pd = pdata; @@ -111,6 +117,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) struct pwrkey_drv_data *pdata; struct input_dev *input; struct device_node *np; + struct clk *clk; int error; u32 vid; @@ -134,6 +141,28 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n"); } + clk = devm_clk_get_optional(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk); + return PTR_ERR(clk); + } + + error = clk_prepare_enable(clk); + if (error) { + dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n", + ERR_PTR(error)); + return error; + } + + error = devm_add_action_or_reset(&pdev->dev, + imx_snvs_pwrkey_disable_clk, clk); + if (error) { + dev_err(&pdev->dev, + "Failed to register clock cleanup handler (%pe)\n", + ERR_PTR(error)); + return error; + } + pdata->wakeup = of_property_read_bool(np, "wakeup-source"); pdata->irq = platform_get_irq(pdev, 0); -- cgit v1.2.3 From fe0a7e3d012738b0034b3c97ddb0e8bc0a3ff0e6 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 15 Oct 2021 21:12:06 -0700 Subject: Input: resistive-adc-touch - fix division by zero error on z1 == 0 For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/resistive-adc-touch.c | 29 ++++++++++++++----------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c index 744544a723b7..6f754a8d30b1 100644 --- a/drivers/input/touchscreen/resistive-adc-touch.c +++ b/drivers/input/touchscreen/resistive-adc-touch.c @@ -71,19 +71,22 @@ static int grts_cb(const void *data, void *private) unsigned int z2 = touch_info[st->ch_map[GRTS_CH_Z2]]; unsigned int Rt; - Rt = z2; - Rt -= z1; - Rt *= st->x_plate_ohms; - Rt = DIV_ROUND_CLOSEST(Rt, 16); - Rt *= x; - Rt /= z1; - Rt = DIV_ROUND_CLOSEST(Rt, 256); - /* - * On increased pressure the resistance (Rt) is decreasing - * so, convert values to make it looks as real pressure. - */ - if (Rt < GRTS_DEFAULT_PRESSURE_MAX) - press = GRTS_DEFAULT_PRESSURE_MAX - Rt; + if (likely(x && z1)) { + Rt = z2; + Rt -= z1; + Rt *= st->x_plate_ohms; + Rt = DIV_ROUND_CLOSEST(Rt, 16); + Rt *= x; + Rt /= z1; + Rt = DIV_ROUND_CLOSEST(Rt, 256); + /* + * On increased pressure the resistance (Rt) is + * decreasing so, convert values to make it looks as + * real pressure. + */ + if (Rt < GRTS_DEFAULT_PRESSURE_MAX) + press = GRTS_DEFAULT_PRESSURE_MAX - Rt; + } } if ((!x && !y) || (st->pressure && (press < st->pressure_min))) { -- cgit v1.2.3 From 3378a07daa6cdd11e042797454c706d1c69f9ca6 Mon Sep 17 00:00:00 2001 From: Michael Cullen Date: Fri, 15 Oct 2021 13:17:50 -0700 Subject: Input: xpad - add support for another USB ID of Nacon GC-100 The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 29de8412e416..4c914f75a902 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -334,6 +334,7 @@ static const struct xpad_device { { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } @@ -451,6 +452,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */ XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke X-Box One pad */ XPAD_XBOX360_VENDOR(0x2f24), /* GameSir Controllers */ + XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ { } }; -- cgit v1.2.3 From a02dcde595f7cbd240ccd64de96034ad91cffc40 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 15 Oct 2021 13:13:06 -0700 Subject: Input: touchscreen - avoid bitwise vs logical OR warning A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor Reported-by: Nick Desaulniers Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/input/touchscreen.c b/drivers/input/touchscreen.c index dd18cb917c4d..4620e20d0190 100644 --- a/drivers/input/touchscreen.c +++ b/drivers/input/touchscreen.c @@ -80,27 +80,27 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", input_abs_get_min(input, axis_x), - &minimum) | - touchscreen_get_prop_u32(dev, "touchscreen-size-x", - input_abs_get_max(input, - axis_x) + 1, - &maximum) | - touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", - input_abs_get_fuzz(input, axis_x), - &fuzz); + &minimum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-size-x", + input_abs_get_max(input, + axis_x) + 1, + &maximum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", + input_abs_get_fuzz(input, axis_x), + &fuzz); if (data_present) touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz); data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y", input_abs_get_min(input, axis_y), - &minimum) | - touchscreen_get_prop_u32(dev, "touchscreen-size-y", - input_abs_get_max(input, - axis_y) + 1, - &maximum) | - touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", - input_abs_get_fuzz(input, axis_y), - &fuzz); + &minimum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-size-y", + input_abs_get_max(input, + axis_y) + 1, + &maximum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", + input_abs_get_fuzz(input, axis_y), + &fuzz); if (data_present) touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz); @@ -108,11 +108,11 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, data_present = touchscreen_get_prop_u32(dev, "touchscreen-max-pressure", input_abs_get_max(input, axis), - &maximum) | - touchscreen_get_prop_u32(dev, - "touchscreen-fuzz-pressure", - input_abs_get_fuzz(input, axis), - &fuzz); + &maximum); + data_present |= touchscreen_get_prop_u32(dev, + "touchscreen-fuzz-pressure", + input_abs_get_fuzz(input, axis), + &fuzz); if (data_present) touchscreen_set_params(input, axis, 0, maximum, fuzz); -- cgit v1.2.3 From b2381acd3fd9bacd2c63f53b2c610c89959b31cc Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 15 Oct 2021 12:46:25 +0200 Subject: x86/fpu: Mask out the invalid MXCSR bits properly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a fix for the fix (yeah, /facepalm). The correct mask to use is not the negation of the MXCSR_MASK but the actual mask which contains the supported bits in the MXCSR register. Reported and debugged by Ville Syrjälä Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") Signed-off-by: Borislav Petkov Tested-by: Ville Syrjälä Tested-by: Ser Olmy Cc: Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com --- arch/x86/kernel/fpu/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index fa17a27390ab..831b25c5e705 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -385,7 +385,7 @@ static int __fpu_restore_sig(void __user *buf, void __user *buf_fx, return -EINVAL; } else { /* Mask invalid bits out for historical reasons (broken hardware). */ - fpu->state.fxsave.mxcsr &= ~mxcsr_feature_mask; + fpu->state.fxsave.mxcsr &= mxcsr_feature_mask; } /* Enforce XFEATURE_MASK_FPSSE when XSAVE is enabled */ -- cgit v1.2.3 From fac3cb82a54a4b7c49c932f96ef196cf5774344c Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 15 Oct 2021 12:05:46 +0300 Subject: net: bridge: mcast: use multicast_membership_interval for IGMPv3 When I added IGMPv3 support I decided to follow the RFC for computing the GMI dynamically: " 8.4. Group Membership Interval The Group Membership Interval is the amount of time that must pass before a multicast router decides there are no more members of a group or a particular source on a network. This value MUST be ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval)." But that actually is inconsistent with how the bridge used to compute it for IGMPv2, where it was user-configurable that has a correct default value but it is up to user-space to maintain it. This would make it consistent with the other timer values which are also maintained correct by the user instead of being dynamically computed. It also changes back to the previous user-expected GMI behaviour for IGMPv3 queries which were supported before IGMPv3 was added. Note that to properly compute it dynamically we would need to add support for "Robustness Variable" which is currently missing. Reported-by: Hangbin Liu Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_private.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index e8136db44462..37ca76406f1e 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -1125,9 +1125,7 @@ static inline unsigned long br_multicast_lmqt(const struct net_bridge_mcast *brm static inline unsigned long br_multicast_gmi(const struct net_bridge_mcast *brmctx) { - /* use the RFC default of 2 for QRV */ - return 2 * brmctx->multicast_query_interval + - brmctx->multicast_query_response_interval; + return brmctx->multicast_membership_interval; } static inline bool -- cgit v1.2.3 From 4e5a04be88fe335ad5331f4f8c17f4ebd357e065 Mon Sep 17 00:00:00 2001 From: Sachi King Date: Sat, 9 Oct 2021 14:32:40 +1100 Subject: pinctrl: amd: disable and mask interrupts on probe Some systems such as the Microsoft Surface Laptop 4 leave interrupts enabled and configured for use in sleep states on boot, which cause unexpected behaviour such as spurious wakes and failed resumes in s2idle states. As interrupts should not be enabled until they are claimed and explicitly enabled, disabling any interrupts mistakenly left enabled by firmware should be safe. Signed-off-by: Sachi King Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 8d0f88e9ca88..bae9d429b813 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -840,6 +840,34 @@ static const struct pinconf_ops amd_pinconf_ops = { .pin_config_group_set = amd_pinconf_group_set, }; +static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) +{ + struct pinctrl_desc *desc = gpio_dev->pctrl->desc; + unsigned long flags; + u32 pin_reg, mask; + int i; + + mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) | + BIT(INTERRUPT_MASK_OFF) | BIT(INTERRUPT_ENABLE_OFF) | + BIT(WAKE_CNTRL_OFF_S4); + + for (i = 0; i < desc->npins; i++) { + int pin = desc->pins[i].number; + const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin); + + if (!pd) + continue; + + raw_spin_lock_irqsave(&gpio_dev->lock, flags); + + pin_reg = readl(gpio_dev->base + i * 4); + pin_reg &= ~mask; + writel(pin_reg, gpio_dev->base + i * 4); + + raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); + } +} + #ifdef CONFIG_PM_SLEEP static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin) { @@ -976,6 +1004,9 @@ static int amd_gpio_probe(struct platform_device *pdev) return PTR_ERR(gpio_dev->pctrl); } + /* Disable and mask interrupts */ + amd_gpio_irq_init(gpio_dev); + girq = &gpio_dev->gc.irq; girq->chip = &amd_gpio_irqchip; /* This will let us handle the parent IRQ in the driver */ -- cgit v1.2.3 From 97e6ea6d78064e7f1e9e19c45dc690aabbb71297 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Thu, 14 Oct 2021 11:24:25 +0530 Subject: scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs When scanning devices through the 'scan' attribute in sysfs, the user will observe duplicate device entries in lsscsi command output. Set the shost's max_channel to zero to avoid this. Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index 2197988333fe..3cae8803383b 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -3736,7 +3736,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) shost->max_lun = -1; shost->unique_id = mrioc->id; - shost->max_channel = 1; + shost->max_channel = 0; shost->max_id = 0xFFFFFFFF; if (prot_mask >= 0) -- cgit v1.2.3 From 85374b6392293d103c2b3406ceb9a1253f81d328 Mon Sep 17 00:00:00 2001 From: Miles Chen Date: Fri, 15 Oct 2021 15:46:54 +0800 Subject: scsi: sd: Fix crashes in sd_resume_runtime() After commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), the following crash was observed. static int sd_resume_runtime(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash if (sdp->ignore_media_change) { ... } It is possible for sdkp to be NULL in sd_resume_runtime(). To fix this crash, follow sd_resume() to test if sdkp is NULL before dereferencing it. Crash: [ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 4.696591][ T151] Mem abort info: [ 4.697919][ T151] ESR = 0x96000005 [ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.701990][ T151] SET = 0, FnV = 0 [ 4.702513][ T151] EA = 0, S1PTW = 0 [ 4.704431][ T151] FSC = 0x05: level 1 translation fault [ 4.705254][ T151] Data abort info: [ 4.705806][ T151] ISV = 0, ISS = 0x00000005 [ 4.706484][ T151] CM = 0, WnR = 0 [ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper [ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000 [ 4.833254][ T151] PHYS_OFFSET: 0x40000000 [ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c [ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4 [ 4.835916][ T151] sp : ffffffc0110db8d0 [ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001 [ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0 [ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000 [ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c [ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000 [ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078 [ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac [ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d [ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0 [ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001 [ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c [ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000 [ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001 [ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003 [ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260 [ 4.856708][ T151] die+0x16c/0x59c [ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210 [ 4.857833][ T151] do_page_fault+0xa4/0x654 [ 4.858418][ T151] do_translation_fault+0x6c/0x1b0 [ 4.859083][ T151] do_mem_abort+0x68/0x10c [ 4.859655][ T151] el1_abort+0x40/0x64 [ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88 [ 4.860834][ T151] el1h_64_sync+0x7c/0x80 [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 [ 4.864489][ T151] sd_probe+0x30/0x428 [ 4.865016][ T151] really_probe+0x14c/0x500 [ 4.865602][ T151] __driver_probe_device+0xb4/0x18c [ 4.866278][ T151] driver_probe_device+0x60/0x2c4 [ 4.866931][ T151] __device_attach_driver+0x228/0x2bc [ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c [ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4 [ 4.869038][ T151] process_one_work+0x3ac/0x590 [ 4.869670][ T151] worker_thread+0x320/0x758 [ 4.870265][ T151] kthread+0x2e8/0x35c [ 4.870792][ T151] ret_from_fork+0x10/0x20 Link: https://lore.kernel.org/r/20211015074654.19615-1-miles.chen@mediatek.com Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") Cc: Stanley Chu Reviewed-by: Martin Kepplinger Reviewed-by: Stanley Chu Signed-off-by: Miles Chen Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 523bf2fdc253..fce63335084e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3683,7 +3683,12 @@ static int sd_resume(struct device *dev) static int sd_resume_runtime(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); - struct scsi_device *sdp = sdkp->device; + struct scsi_device *sdp; + + if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ + return 0; + + sdp = sdkp->device; if (sdp->ignore_media_change) { /* clear the device's sense data */ -- cgit v1.2.3 From b504a884f6b5a77dac7d580ffa08e482f70d1a30 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Mon, 6 Sep 2021 17:42:19 +0800 Subject: can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimer When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will give an alert "rx timeout, send abort", but do nothing actually. Move the alert into session active judgment condition, it is more reasonable. One of the scenarios is that j1939_tp_rxtimer() execute followed by j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde --- net/can/j1939/transport.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index bb5c4b8979be..bfb0718d4587 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1237,12 +1237,11 @@ static enum hrtimer_restart j1939_tp_rxtimer(struct hrtimer *hrtimer) session->err = -ETIME; j1939_session_deactivate(session); } else { - netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n", - __func__, session); - j1939_session_list_lock(session->priv); if (session->state >= J1939_SESSION_ACTIVE && session->state < J1939_SESSION_ACTIVE_MAX) { + netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n", + __func__, session); j1939_session_get(session); hrtimer_start(&session->rxtimer, ms_to_ktime(J1939_XTP_ABORT_TIMEOUT_MS), -- cgit v1.2.3 From d9d52a3ebd284882f5562c88e55991add5d01586 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Sun, 26 Sep 2021 18:47:57 +0800 Subject: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde --- net/can/j1939/main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c index 08c8606cfd9c..9bc55ecb37f9 100644 --- a/net/can/j1939/main.c +++ b/net/can/j1939/main.c @@ -249,11 +249,14 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev) struct j1939_priv *priv, *priv_new; int ret; - priv = j1939_priv_get_by_ndev(ndev); + spin_lock(&j1939_netdev_lock); + priv = j1939_priv_get_by_ndev_locked(ndev); if (priv) { kref_get(&priv->rx_kref); + spin_unlock(&j1939_netdev_lock); return priv; } + spin_unlock(&j1939_netdev_lock); priv = j1939_priv_create(ndev); if (!priv) @@ -269,10 +272,10 @@ struct j1939_priv *j1939_netdev_start(struct net_device *ndev) /* Someone was faster than us, use their priv and roll * back our's. */ + kref_get(&priv_new->rx_kref); spin_unlock(&j1939_netdev_lock); dev_put(ndev); kfree(priv); - kref_get(&priv_new->rx_kref); return priv_new; } j1939_priv_set(ndev, priv); -- cgit v1.2.3 From 379743985ab6cfe2cbd32067cf4ed497baca6d06 Mon Sep 17 00:00:00 2001 From: Zhang Changzhong Date: Thu, 30 Sep 2021 11:33:20 +0800 Subject: can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with error length According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so cancel session when receive unexpected TP.DT message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde --- net/can/j1939/transport.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index bfb0718d4587..1ea6fee3d986 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1788,6 +1788,7 @@ static void j1939_xtp_rx_dpo(struct j1939_priv *priv, struct sk_buff *skb, static void j1939_xtp_rx_dat_one(struct j1939_session *session, struct sk_buff *skb) { + enum j1939_xtp_abort abort = J1939_XTP_ABORT_FAULT; struct j1939_priv *priv = session->priv; struct j1939_sk_buff_cb *skcb, *se_skcb; struct sk_buff *se_skb = NULL; @@ -1802,9 +1803,11 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session, skcb = j1939_skb_to_cb(skb); dat = skb->data; - if (skb->len <= 1) + if (skb->len != 8) { /* makes no sense */ + abort = J1939_XTP_ABORT_UNEXPECTED_DATA; goto out_session_cancel; + } switch (session->last_cmd) { case 0xff: @@ -1903,7 +1906,7 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session, out_session_cancel: kfree_skb(se_skb); j1939_session_timers_cancel(session); - j1939_session_cancel(session, J1939_XTP_ABORT_FAULT); + j1939_session_cancel(session, abort); j1939_session_put(session); } -- cgit v1.2.3 From a4fbe70c5cb746441d56b28cf88161d9e0e25378 Mon Sep 17 00:00:00 2001 From: Zhang Changzhong Date: Thu, 14 Oct 2021 17:26:40 +0800 Subject: can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytes The receiver should abort TP if 'total message size' in TP.CM_RTS and TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the j1939 stack only checks the upper bound and the receiver will accept the following broadcast message: vcan1 18ECFF00 [8] 20 08 00 02 FF 00 23 01 vcan1 18EBFF00 [8] 01 00 00 00 00 00 00 00 vcan1 18EBFF00 [8] 02 00 FF FF FF FF FF FF This patch adds check for the lower bound and abort illegal TP. [1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong Acked-by: Oleksij Rempel Signed-off-by: Marc Kleine-Budde --- net/can/j1939/j1939-priv.h | 1 + net/can/j1939/transport.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/net/can/j1939/j1939-priv.h b/net/can/j1939/j1939-priv.h index f6df20808f5e..16af1a7f80f6 100644 --- a/net/can/j1939/j1939-priv.h +++ b/net/can/j1939/j1939-priv.h @@ -330,6 +330,7 @@ int j1939_session_activate(struct j1939_session *session); void j1939_tp_schedule_txtimer(struct j1939_session *session, int msec); void j1939_session_timers_cancel(struct j1939_session *session); +#define J1939_MIN_TP_PACKET_SIZE 9 #define J1939_MAX_TP_PACKET_SIZE (7 * 0xff) #define J1939_MAX_ETP_PACKET_SIZE (7 * 0x00ffffff) diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index 1ea6fee3d986..6c0a0ebdd024 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1608,6 +1608,8 @@ j1939_session *j1939_xtp_rx_rts_session_new(struct j1939_priv *priv, abort = J1939_XTP_ABORT_FAULT; else if (len > priv->tp_max_packet_size) abort = J1939_XTP_ABORT_RESOURCE; + else if (len < J1939_MIN_TP_PACKET_SIZE) + abort = J1939_XTP_ABORT_FAULT; } if (abort != J1939_XTP_NO_ABORT) { -- cgit v1.2.3 From 9acf636215a6ce9362fe618e7da4913b8bfe84c8 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Sat, 9 Oct 2021 15:40:18 +0800 Subject: can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible() Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/isotp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/can/isotp.c b/net/can/isotp.c index caaa532ece94..2ac29c2b2ca6 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -865,7 +865,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) return -EAGAIN; /* wait for complete transmission of current pdu */ - wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE); + err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE); + if (err) + return err; } if (!size || size > MAX_MSG_LENGTH) -- cgit v1.2.3 From 43a08c3bdac4cb42eff8fe5e2278bffe0c5c3daa Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Sat, 9 Oct 2021 15:40:30 +0800 Subject: can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg() When isotp_sendmsg() concurrent, tx.state of all TX processes can be ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and wq_has_sleeper(&so->wait) can not protect TX buffer from being accessed by multiple TX processes. We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly. If the modification of the previous process succeed, the later process must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer is accessed by only one process at the same time. And we should also restore the original tx.state at the subsequent error processes. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/isotp.c | 46 +++++++++++++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/net/can/isotp.c b/net/can/isotp.c index 2ac29c2b2ca6..d1f54273c0bb 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -121,7 +121,7 @@ enum { struct tpcon { int idx; int len; - u8 state; + u32 state; u8 bs; u8 sn; u8 ll_dl; @@ -848,6 +848,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) { struct sock *sk = sock->sk; struct isotp_sock *so = isotp_sk(sk); + u32 old_state = so->tx.state; struct sk_buff *skb; struct net_device *dev; struct canfd_frame *cf; @@ -860,47 +861,55 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) return -EADDRNOTAVAIL; /* we do not support multiple buffers - for now */ - if (so->tx.state != ISOTP_IDLE || wq_has_sleeper(&so->wait)) { - if (msg->msg_flags & MSG_DONTWAIT) - return -EAGAIN; + if (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE || + wq_has_sleeper(&so->wait)) { + if (msg->msg_flags & MSG_DONTWAIT) { + err = -EAGAIN; + goto err_out; + } /* wait for complete transmission of current pdu */ err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE); if (err) - return err; + goto err_out; } - if (!size || size > MAX_MSG_LENGTH) - return -EINVAL; + if (!size || size > MAX_MSG_LENGTH) { + err = -EINVAL; + goto err_out; + } /* take care of a potential SF_DL ESC offset for TX_DL > 8 */ off = (so->tx.ll_dl > CAN_MAX_DLEN) ? 1 : 0; /* does the given data fit into a single frame for SF_BROADCAST? */ if ((so->opt.flags & CAN_ISOTP_SF_BROADCAST) && - (size > so->tx.ll_dl - SF_PCI_SZ4 - ae - off)) - return -EINVAL; + (size > so->tx.ll_dl - SF_PCI_SZ4 - ae - off)) { + err = -EINVAL; + goto err_out; + } err = memcpy_from_msg(so->tx.buf, msg, size); if (err < 0) - return err; + goto err_out; dev = dev_get_by_index(sock_net(sk), so->ifindex); - if (!dev) - return -ENXIO; + if (!dev) { + err = -ENXIO; + goto err_out; + } skb = sock_alloc_send_skb(sk, so->ll.mtu + sizeof(struct can_skb_priv), msg->msg_flags & MSG_DONTWAIT, &err); if (!skb) { dev_put(dev); - return err; + goto err_out; } can_skb_reserve(skb); can_skb_prv(skb)->ifindex = dev->ifindex; can_skb_prv(skb)->skbcnt = 0; - so->tx.state = ISOTP_SENDING; so->tx.len = size; so->tx.idx = 0; @@ -956,7 +965,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) if (err) { pr_notice_once("can-isotp: %s: can_send_ret %pe\n", __func__, ERR_PTR(err)); - return err; + goto err_out; } if (wait_tx_done) { @@ -965,6 +974,13 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) } return size; + +err_out: + so->tx.state = old_state; + if (so->tx.state == ISOTP_IDLE) + wake_up_interruptible(&so->wait); + + return err; } static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, -- cgit v1.2.3 From f7bf35862477d6d4f8a9746c645a4380de984700 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 7 Sep 2021 19:18:00 +0900 Subject: brd: reduce the brd_devices_mutex scope As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by: Tetsuo Handa Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp Signed-off-by: Jens Axboe --- drivers/block/brd.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 58ec167aa018..530b31240203 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -373,10 +373,22 @@ static int brd_alloc(int i) struct gendisk *disk; char buf[DISK_NAME_LEN]; + mutex_lock(&brd_devices_mutex); + list_for_each_entry(brd, &brd_devices, brd_list) { + if (brd->brd_number == i) { + mutex_unlock(&brd_devices_mutex); + return -EEXIST; + } + } brd = kzalloc(sizeof(*brd), GFP_KERNEL); - if (!brd) + if (!brd) { + mutex_unlock(&brd_devices_mutex); return -ENOMEM; + } brd->brd_number = i; + list_add_tail(&brd->brd_list, &brd_devices); + mutex_unlock(&brd_devices_mutex); + spin_lock_init(&brd->brd_lock); INIT_RADIX_TREE(&brd->brd_pages, GFP_ATOMIC); @@ -411,37 +423,30 @@ static int brd_alloc(int i) blk_queue_flag_set(QUEUE_FLAG_NONROT, disk->queue); blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, disk->queue); add_disk(disk); - list_add_tail(&brd->brd_list, &brd_devices); return 0; out_free_dev: + mutex_lock(&brd_devices_mutex); + list_del(&brd->brd_list); + mutex_unlock(&brd_devices_mutex); kfree(brd); return -ENOMEM; } static void brd_probe(dev_t dev) { - int i = MINOR(dev) / max_part; - struct brd_device *brd; - - mutex_lock(&brd_devices_mutex); - list_for_each_entry(brd, &brd_devices, brd_list) { - if (brd->brd_number == i) - goto out_unlock; - } - - brd_alloc(i); -out_unlock: - mutex_unlock(&brd_devices_mutex); + brd_alloc(MINOR(dev) / max_part); } static void brd_del_one(struct brd_device *brd) { - list_del(&brd->brd_list); del_gendisk(brd->brd_disk); blk_cleanup_disk(brd->brd_disk); brd_free_pages(brd); + mutex_lock(&brd_devices_mutex); + list_del(&brd->brd_list); + mutex_unlock(&brd_devices_mutex); kfree(brd); } @@ -491,25 +496,21 @@ static int __init brd_init(void) brd_debugfs_dir = debugfs_create_dir("ramdisk_pages", NULL); - mutex_lock(&brd_devices_mutex); for (i = 0; i < rd_nr; i++) { err = brd_alloc(i); if (err) goto out_free; } - mutex_unlock(&brd_devices_mutex); - pr_info("brd: module loaded\n"); return 0; out_free: + unregister_blkdev(RAMDISK_MAJOR, "ramdisk"); debugfs_remove_recursive(brd_debugfs_dir); list_for_each_entry_safe(brd, next, &brd_devices, brd_list) brd_del_one(brd); - mutex_unlock(&brd_devices_mutex); - unregister_blkdev(RAMDISK_MAJOR, "ramdisk"); pr_info("brd: module NOT loaded !!!\n"); return err; @@ -519,13 +520,12 @@ static void __exit brd_exit(void) { struct brd_device *brd, *next; + unregister_blkdev(RAMDISK_MAJOR, "ramdisk"); debugfs_remove_recursive(brd_debugfs_dir); list_for_each_entry_safe(brd, next, &brd_devices, brd_list) brd_del_one(brd); - unregister_blkdev(RAMDISK_MAJOR, "ramdisk"); - pr_info("brd: module unloaded\n"); } -- cgit v1.2.3 From a20417611b98e12a724e5c828c472ea16990b71f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 14 Oct 2021 15:02:31 +0200 Subject: block: warn when putting the final reference on a registered disk Warn when the last reference on a live disk is put without calling del_gendisk first. There are some BDI related bug reports that look like a case of this, so make sure we have the proper instrumentation to catch it. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de Signed-off-by: Jens Axboe --- block/genhd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/genhd.c b/block/genhd.c index 7a766cc613c7..b49858550fa6 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1078,6 +1078,7 @@ static void disk_release(struct device *dev) struct gendisk *disk = dev_to_disk(dev); might_sleep(); + WARN_ON_ONCE(disk_live(disk)); disk_release_events(disk); kfree(disk->random); -- cgit v1.2.3 From d29bd41428cfff9b582c248db14a47e2be8457a8 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Fri, 15 Oct 2021 16:43:36 +0200 Subject: block, bfq: reset last_bfqq_created on group change Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal Signed-off-by: Paolo Valente Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe --- block/bfq-cgroup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c index e2f14508f2d6..85b8e1c3a762 100644 --- a/block/bfq-cgroup.c +++ b/block/bfq-cgroup.c @@ -666,6 +666,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq, bfq_put_idle_entity(bfq_entity_service_tree(entity), entity); bfqg_and_blkg_put(bfqq_group(bfqq)); + if (entity->parent && + entity->parent->last_bfqq_created == bfqq) + entity->parent->last_bfqq_created = NULL; + else if (bfqd->last_bfqq_created == bfqq) + bfqd->last_bfqq_created = NULL; + entity->parent = bfqg->my_entity; entity->sched_data = &bfqg->sched_data; /* pin down bfqg and its associated blkg */ -- cgit v1.2.3 From 5370b0f49078203acf3c064b634a09707167a864 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 14 Oct 2021 13:20:22 -1000 Subject: blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu c3df5fb57fe8 ("cgroup: rstat: fix A-A deadlock on 32bit around u64_stats_sync") made u64_stats updates irq-safe to avoid A-A deadlocks. Unfortunately, the conversion missed one in blk_cgroup_bio_start(). Fix it. Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat") Cc: stable@vger.kernel.org # v5.13+ Reported-by: syzbot+9738c8815b375ce482a1@syzkaller.appspotmail.com Signed-off-by: Tejun Heo Link: https://lore.kernel.org/r/YWi7NrQdVlxD6J9W@slm.duckdns.org Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 38b9f7684952..9a1c5839dd46 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -1897,10 +1897,11 @@ void blk_cgroup_bio_start(struct bio *bio) { int rwd = blk_cgroup_io_type(bio), cpu; struct blkg_iostat_set *bis; + unsigned long flags; cpu = get_cpu(); bis = per_cpu_ptr(bio->bi_blkg->iostat_cpu, cpu); - u64_stats_update_begin(&bis->sync); + flags = u64_stats_update_begin_irqsave(&bis->sync); /* * If the bio is flagged with BIO_CGROUP_ACCT it means this is a split @@ -1912,7 +1913,7 @@ void blk_cgroup_bio_start(struct bio *bio) } bis->cur.ios[rwd]++; - u64_stats_update_end(&bis->sync); + u64_stats_update_end_irqrestore(&bis->sync, flags); if (cgroup_subsys_on_dfl(io_cgrp_subsys)) cgroup_rstat_updated(bio->bi_blkg->blkcg->css.cgroup, cpu); put_cpu(); -- cgit v1.2.3 From f7c05c3987dcfde9a4e8c2d533db013fabebca0d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Sep 2021 16:55:56 +0900 Subject: can: rcar_can: fix suspend/resume If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda Tested-by: Ayumi Nakamichi Reviewed-by: Ulrich Hecht Tested-by: Biju Das Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar/rcar_can.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index 00e4533c8bdd..8999ec9455ec 100644 --- a/drivers/net/can/rcar/rcar_can.c +++ b/drivers/net/can/rcar/rcar_can.c @@ -846,10 +846,12 @@ static int __maybe_unused rcar_can_suspend(struct device *dev) struct rcar_can_priv *priv = netdev_priv(ndev); u16 ctlr; - if (netif_running(ndev)) { - netif_stop_queue(ndev); - netif_device_detach(ndev); - } + if (!netif_running(ndev)) + return 0; + + netif_stop_queue(ndev); + netif_device_detach(ndev); + ctlr = readw(&priv->regs->ctlr); ctlr |= RCAR_CAN_CTLR_CANM_HALT; writew(ctlr, &priv->regs->ctlr); @@ -868,6 +870,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev) u16 ctlr; int err; + if (!netif_running(ndev)) + return 0; + err = clk_enable(priv->clk); if (err) { netdev_err(ndev, "clk_enable() failed, error %d\n", err); @@ -881,10 +886,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev) writew(ctlr, &priv->regs->ctlr); priv->can.state = CAN_STATE_ERROR_ACTIVE; - if (netif_running(ndev)) { - netif_device_attach(ndev); - netif_start_queue(ndev); - } + netif_device_attach(ndev); + netif_start_queue(ndev); + return 0; } -- cgit v1.2.3 From 99d173fbe8944861a00ebd1c73817a1260d21e60 Mon Sep 17 00:00:00 2001 From: Aswath Govindraju Date: Mon, 20 Sep 2021 18:03:43 +0530 Subject: can: m_can: fix iomap_read_fifo() and iomap_write_fifo() The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20210920123344.2320-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can_platform.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c index 308d4f2fff00..eee47bad0592 100644 --- a/drivers/net/can/m_can/m_can_platform.c +++ b/drivers/net/can/m_can/m_can_platform.c @@ -32,8 +32,13 @@ static u32 iomap_read_reg(struct m_can_classdev *cdev, int reg) static int iomap_read_fifo(struct m_can_classdev *cdev, int offset, void *val, size_t val_count) { struct m_can_plat_priv *priv = cdev_to_priv(cdev); + void __iomem *src = priv->mram_base + offset; - ioread32_rep(priv->mram_base + offset, val, val_count); + while (val_count--) { + *(unsigned int *)val = ioread32(src); + val += 4; + src += 4; + } return 0; } @@ -51,8 +56,13 @@ static int iomap_write_fifo(struct m_can_classdev *cdev, int offset, const void *val, size_t val_count) { struct m_can_plat_priv *priv = cdev_to_priv(cdev); + void __iomem *dst = priv->mram_base + offset; - iowrite32_rep(priv->base + offset, val, val_count); + while (val_count--) { + iowrite32(*(unsigned int *)val, dst); + val += 4; + dst += 4; + } return 0; } -- cgit v1.2.3 From 949fe9b35570361bc6ee2652f89a0561b26eec98 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Thu, 14 Oct 2021 06:28:33 +0000 Subject: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/peak_pci.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 6db90dc4bc9d..84f34020aafb 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -752,16 +752,15 @@ static void peak_pci_remove(struct pci_dev *pdev) struct net_device *prev_dev = chan->prev_dev; dev_info(&pdev->dev, "removing device %s\n", dev->name); + /* do that only for first channel */ + if (!prev_dev && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); unregister_sja1000dev(dev); free_sja1000dev(dev); dev = prev_dev; - if (!dev) { - /* do that only for first channel */ - if (chan->pciec_card) - peak_pciec_remove(chan->pciec_card); + if (!dev) break; - } priv = netdev_priv(dev); chan = priv->priv; } -- cgit v1.2.3 From 3d031abc7e7249573148871180c28ecedb5e27df Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Wed, 29 Sep 2021 16:21:10 +0200 Subject: can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index b11eabad575b..e206959b3d06 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -551,11 +551,10 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if, } else if (sm->channel_p_w_b & PUCAN_BUS_WARNING) { new_state = CAN_STATE_ERROR_WARNING; } else { - /* no error bit (so, no error skb, back to active state) */ - dev->can.state = CAN_STATE_ERROR_ACTIVE; + /* back to (or still in) ERROR_ACTIVE state */ + new_state = CAN_STATE_ERROR_ACTIVE; pdev->bec.txerr = 0; pdev->bec.rxerr = 0; - return 0; } /* state hasn't changed */ -- cgit v1.2.3 From 553715feaa9e0453bc59f6ba20e1c69346888bd5 Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Wed, 29 Sep 2021 16:21:11 +0200 Subject: can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the nullity of a pointer Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/20210929142111.55757-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index e206959b3d06..09029a3bad1a 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -567,8 +567,7 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if, /* allocate an skb to store the error frame */ skb = alloc_can_err_skb(netdev, &cf); - if (skb) - can_change_state(netdev, cf, tx_state, rx_state); + can_change_state(netdev, cf, tx_state, rx_state); /* things must be done even in case of OOM */ if (new_state == CAN_STATE_BUS_OFF) -- cgit v1.2.3 From d9aaaf223297f6146d9d7f36caca927c92ab855a Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Sun, 10 Oct 2021 11:24:39 -0700 Subject: netfilter: ebtables: allocate chainstack on CPU local nodes Keep the per-CPU memory allocated for chainstacks local. Signed-off-by: Davidlohr Bueso Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 83d1798dfbb4..ba045f35114d 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -926,7 +926,9 @@ static int translate_table(struct net *net, const char *name, return -ENOMEM; for_each_possible_cpu(i) { newinfo->chainstack[i] = - vmalloc(array_size(udc_cnt, sizeof(*(newinfo->chainstack[0])))); + vmalloc_node(array_size(udc_cnt, + sizeof(*(newinfo->chainstack[0]))), + cpu_to_node(i)); if (!newinfo->chainstack[i]) { while (i) vfree(newinfo->chainstack[--i]); -- cgit v1.2.3 From 519d81956ee277b4419c723adfb154603c2565ba Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 17 Oct 2021 20:00:13 -1000 Subject: Linux 5.15-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4d0c0ed9236e..91297670da8e 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit v1.2.3 From c2bbf9d1e9ac7d4fdd503b190bc1ba8a6302bc49 Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Tue, 12 Oct 2021 01:54:03 -0400 Subject: dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC Mapping something twice should be possible as long as, DMA_ATTR_SKIP_CPU_SYNC is passed to the strictly speaking second relevant mapping operation (that attempts to map the same thing). So, don't issue a warning if the specified condition is met in add_dma_entry(). Signed-off-by: Hamza Mahfooz Signed-off-by: Christoph Hellwig --- kernel/dma/debug.c | 24 ++++++++++++++---------- kernel/dma/debug.h | 24 ++++++++++++++++-------- kernel/dma/mapping.c | 12 ++++++------ 3 files changed, 36 insertions(+), 24 deletions(-) diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c index 35da4c3a6486..7a14ca29c377 100644 --- a/kernel/dma/debug.c +++ b/kernel/dma/debug.c @@ -552,7 +552,7 @@ static void active_cacheline_remove(struct dma_debug_entry *entry) * Wrapper function for adding an entry to the hash. * This function takes care of locking itself. */ -static void add_dma_entry(struct dma_debug_entry *entry) +static void add_dma_entry(struct dma_debug_entry *entry, unsigned long attrs) { struct hash_bucket *bucket; unsigned long flags; @@ -566,7 +566,7 @@ static void add_dma_entry(struct dma_debug_entry *entry) if (rc == -ENOMEM) { pr_err("cacheline tracking ENOMEM, dma-debug disabled\n"); global_disable = true; - } else if (rc == -EEXIST) { + } else if (rc == -EEXIST && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { err_printk(entry->dev, entry, "cacheline tracking EEXIST, overlapping mappings aren't supported\n"); } @@ -1191,7 +1191,8 @@ void debug_dma_map_single(struct device *dev, const void *addr, EXPORT_SYMBOL(debug_dma_map_single); void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, - size_t size, int direction, dma_addr_t dma_addr) + size_t size, int direction, dma_addr_t dma_addr, + unsigned long attrs) { struct dma_debug_entry *entry; @@ -1222,7 +1223,7 @@ void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, check_for_illegal_area(dev, addr, size); } - add_dma_entry(entry); + add_dma_entry(entry, attrs); } void debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) @@ -1280,7 +1281,8 @@ void debug_dma_unmap_page(struct device *dev, dma_addr_t addr, } void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, int mapped_ents, int direction) + int nents, int mapped_ents, int direction, + unsigned long attrs) { struct dma_debug_entry *entry; struct scatterlist *s; @@ -1312,7 +1314,7 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, check_sg_segment(dev, s); - add_dma_entry(entry); + add_dma_entry(entry, attrs); } } @@ -1368,7 +1370,8 @@ void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, } void debug_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t dma_addr, void *virt) + dma_addr_t dma_addr, void *virt, + unsigned long attrs) { struct dma_debug_entry *entry; @@ -1398,7 +1401,7 @@ void debug_dma_alloc_coherent(struct device *dev, size_t size, else entry->pfn = page_to_pfn(virt_to_page(virt)); - add_dma_entry(entry); + add_dma_entry(entry, attrs); } void debug_dma_free_coherent(struct device *dev, size_t size, @@ -1429,7 +1432,8 @@ void debug_dma_free_coherent(struct device *dev, size_t size, } void debug_dma_map_resource(struct device *dev, phys_addr_t addr, size_t size, - int direction, dma_addr_t dma_addr) + int direction, dma_addr_t dma_addr, + unsigned long attrs) { struct dma_debug_entry *entry; @@ -1449,7 +1453,7 @@ void debug_dma_map_resource(struct device *dev, phys_addr_t addr, size_t size, entry->direction = direction; entry->map_err_type = MAP_ERR_NOT_CHECKED; - add_dma_entry(entry); + add_dma_entry(entry, attrs); } void debug_dma_unmap_resource(struct device *dev, dma_addr_t dma_addr, diff --git a/kernel/dma/debug.h b/kernel/dma/debug.h index 83643b3010b2..f525197d3cae 100644 --- a/kernel/dma/debug.h +++ b/kernel/dma/debug.h @@ -11,26 +11,30 @@ #ifdef CONFIG_DMA_API_DEBUG extern void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, size_t size, - int direction, dma_addr_t dma_addr); + int direction, dma_addr_t dma_addr, + unsigned long attrs); extern void debug_dma_unmap_page(struct device *dev, dma_addr_t addr, size_t size, int direction); extern void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, int mapped_ents, int direction); + int nents, int mapped_ents, int direction, + unsigned long attrs); extern void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nelems, int dir); extern void debug_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t dma_addr, void *virt); + dma_addr_t dma_addr, void *virt, + unsigned long attrs); extern void debug_dma_free_coherent(struct device *dev, size_t size, void *virt, dma_addr_t addr); extern void debug_dma_map_resource(struct device *dev, phys_addr_t addr, size_t size, int direction, - dma_addr_t dma_addr); + dma_addr_t dma_addr, + unsigned long attrs); extern void debug_dma_unmap_resource(struct device *dev, dma_addr_t dma_addr, size_t size, int direction); @@ -53,7 +57,8 @@ extern void debug_dma_sync_sg_for_device(struct device *dev, #else /* CONFIG_DMA_API_DEBUG */ static inline void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, size_t size, - int direction, dma_addr_t dma_addr) + int direction, dma_addr_t dma_addr, + unsigned long attrs) { } @@ -63,7 +68,8 @@ static inline void debug_dma_unmap_page(struct device *dev, dma_addr_t addr, } static inline void debug_dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, int mapped_ents, int direction) + int nents, int mapped_ents, int direction, + unsigned long attrs) { } @@ -74,7 +80,8 @@ static inline void debug_dma_unmap_sg(struct device *dev, } static inline void debug_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t dma_addr, void *virt) + dma_addr_t dma_addr, void *virt, + unsigned long attrs) { } @@ -85,7 +92,8 @@ static inline void debug_dma_free_coherent(struct device *dev, size_t size, static inline void debug_dma_map_resource(struct device *dev, phys_addr_t addr, size_t size, int direction, - dma_addr_t dma_addr) + dma_addr_t dma_addr, + unsigned long attrs) { } diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index 49885023c223..8349a9f2c345 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -156,7 +156,7 @@ dma_addr_t dma_map_page_attrs(struct device *dev, struct page *page, addr = dma_direct_map_page(dev, page, offset, size, dir, attrs); else addr = ops->map_page(dev, page, offset, size, dir, attrs); - debug_dma_map_page(dev, page, offset, size, dir, addr); + debug_dma_map_page(dev, page, offset, size, dir, addr, attrs); return addr; } @@ -195,7 +195,7 @@ static int __dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, ents = ops->map_sg(dev, sg, nents, dir, attrs); if (ents > 0) - debug_dma_map_sg(dev, sg, nents, ents, dir); + debug_dma_map_sg(dev, sg, nents, ents, dir, attrs); else if (WARN_ON_ONCE(ents != -EINVAL && ents != -ENOMEM && ents != -EIO)) return -EIO; @@ -305,7 +305,7 @@ dma_addr_t dma_map_resource(struct device *dev, phys_addr_t phys_addr, else if (ops->map_resource) addr = ops->map_resource(dev, phys_addr, size, dir, attrs); - debug_dma_map_resource(dev, phys_addr, size, dir, addr); + debug_dma_map_resource(dev, phys_addr, size, dir, addr, attrs); return addr; } EXPORT_SYMBOL(dma_map_resource); @@ -510,7 +510,7 @@ void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle, else return NULL; - debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); + debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr, attrs); return cpu_addr; } EXPORT_SYMBOL(dma_alloc_attrs); @@ -566,7 +566,7 @@ struct page *dma_alloc_pages(struct device *dev, size_t size, struct page *page = __dma_alloc_pages(dev, size, dma_handle, dir, gfp); if (page) - debug_dma_map_page(dev, page, 0, size, dir, *dma_handle); + debug_dma_map_page(dev, page, 0, size, dir, *dma_handle, 0); return page; } EXPORT_SYMBOL_GPL(dma_alloc_pages); @@ -644,7 +644,7 @@ struct sg_table *dma_alloc_noncontiguous(struct device *dev, size_t size, if (sgt) { sgt->nents = 1; - debug_dma_map_sg(dev, sgt->sgl, sgt->orig_nents, 1, dir); + debug_dma_map_sg(dev, sgt->sgl, sgt->orig_nents, 1, dir, attrs); } return sgt; } -- cgit v1.2.3 From 0a9bb11a5e298e72b675255a4bb2893513000584 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 14 Oct 2021 19:18:04 -0700 Subject: hamradio: baycom_epp: fix build for UML MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On i386, the baycom_epp driver wants to inspect X86 CPU features (TSC) and then act on that data, but that info is not available when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/hamradio/baycom_epp.c: In function ‘epp_bh’: ../drivers/net/hamradio/baycom_epp.c:630:6: error: implicit declaration of function ‘boot_cpu_has’; did you mean ‘get_cpu_mask’? [-Werror=implicit-function-declaration] if (boot_cpu_has(X86_FEATURE_TSC)) \ ^ ../drivers/net/hamradio/baycom_epp.c:658:2: note: in expansion of macro ‘GETTICK’ GETTICK(time1); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap Cc: linux-um@lists.infradead.org Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Thomas Sailer Cc: linux-hams@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/hamradio/baycom_epp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 775dcf4ebde5..6b6f28d5b8d5 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -623,16 +623,16 @@ static int receive(struct net_device *dev, int cnt) /* --------------------------------------------------------------------- */ -#ifdef __i386__ +#if defined(__i386__) && !defined(CONFIG_UML) #include #define GETTICK(x) \ ({ \ if (boot_cpu_has(X86_FEATURE_TSC)) \ x = (unsigned int)rdtsc(); \ }) -#else /* __i386__ */ +#else /* __i386__ && !CONFIG_UML */ #define GETTICK(x) -#endif /* __i386__ */ +#endif /* __i386__ && !CONFIG_UML */ static void epp_bh(struct work_struct *work) { -- cgit v1.2.3 From 66d262804a2276721eac86cf18fcd61046149193 Mon Sep 17 00:00:00 2001 From: Aleksander Jan Bajkowski Date: Sat, 16 Oct 2021 00:10:20 +0200 Subject: net: dsa: lantiq_gswip: fix register definition I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski Acked-by: Hauke Mehrtens Signed-off-by: David S. Miller --- drivers/net/dsa/lantiq_gswip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 3ff4b7e177f3..dbd4486a173f 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -230,7 +230,7 @@ #define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) #define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ #define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ -#define GSWIP_SDMA_PCTRL_PAUFWD BIT(1) /* Pause Frame Forwarding */ +#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ #define GSWIP_TABLE_ACTIVE_VLAN 0x01 #define GSWIP_TABLE_VLAN_MAPPING 0x02 -- cgit v1.2.3 From 342afce10d6f61c443c95e244f812d4766f73f53 Mon Sep 17 00:00:00 2001 From: DENG Qingfang Date: Sat, 16 Oct 2021 14:24:14 +0800 Subject: net: dsa: mt7530: correct ds->num_ports Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports. Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required. Cc: stable@vger.kernel.org Signed-off-by: DENG Qingfang Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 094737e5084a..9890672a206d 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex); /* Allow the user port gets connected to the cpu port and also @@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex); /* Clear up all port matrix which could be restored in the next @@ -3211,7 +3205,7 @@ mt7530_probe(struct mdio_device *mdiodev) return -ENOMEM; priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS; /* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence. -- cgit v1.2.3 From 2dc4e9e88cfcc38454d52b01ed3422238c134003 Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Sun, 17 Oct 2021 14:58:51 +0300 Subject: net/sched: act_ct: Fix byte count on fragmented packets First fragmented packets (frag offset = 0) byte len is zeroed when stolen by ip_defrag(). And since act_ct update the stats only afterwards (at end of execute), bytes aren't correctly accounted for such packets. To fix this, move stats update to start of action execute. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey Signed-off-by: David S. Miller --- net/sched/act_ct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index ad9df0cb4b98..90866ae45573 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -960,6 +960,7 @@ static int tcf_ct_act(struct sk_buff *skb, const struct tc_action *a, tmpl = p->tmpl; tcf_lastuse_update(&c->tcf_tm); + tcf_action_update_bstats(&c->common, skb); if (clear) { qdisc_skb_cb(skb)->post_ct = false; @@ -1049,7 +1050,6 @@ out_push: qdisc_skb_cb(skb)->post_ct = true; out_clear: - tcf_action_update_bstats(&c->common, skb); if (defrag) qdisc_skb_cb(skb)->pkt_len = skb->len; return retval; -- cgit v1.2.3 From d9fd7e9fccfac466fb528a783f2fc76f2982604c Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Sun, 17 Oct 2021 21:31:30 -0400 Subject: net: sparx5: Add of_node_put() before goto Fix following coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/sparx5/sparx5_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c index cbece6e9bff2..5030dfca3879 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c @@ -758,6 +758,7 @@ static int mchp_sparx5_probe(struct platform_device *pdev) err = dev_err_probe(sparx5->dev, PTR_ERR(serdes), "port %u: missing serdes\n", portno); + of_node_put(portnp); goto cleanup_config; } config->portno = portno; -- cgit v1.2.3 From d1a7b9e4696584ce05c12567762c18a866837a85 Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Sun, 17 Oct 2021 21:32:32 -0400 Subject: net: mscc: ocelot: Add of_node_put() before goto Fix following coccicheck warning: ./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto. Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot_vsc7514.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c index 291ae6817c26..d51f799e4e86 100644 --- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c +++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c @@ -969,6 +969,7 @@ static int mscc_ocelot_init_ports(struct platform_device *pdev, target = ocelot_regmap_init(ocelot, res); if (IS_ERR(target)) { err = PTR_ERR(target); + of_node_put(portnp); goto out_teardown; } -- cgit v1.2.3 From b2cddb44bddc1a9c5949a978bb454bba863264db Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Mon, 18 Oct 2021 02:16:22 +0000 Subject: cavium: Return negative value when pci_alloc_irq_vectors() fails During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 691e1475d55e..0fbecd093fa1 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -1193,7 +1193,7 @@ static int nic_register_interrupts(struct nicpf *nic) dev_err(&nic->pdev->dev, "Request for #%d msix vectors failed, returned %d\n", nic->num_vec, ret); - return 1; + return ret; } /* Register mailbox interrupt handler */ -- cgit v1.2.3 From b416beb25d9317499c823aea1522eefd8d72ea36 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 18 Oct 2021 11:29:34 +0800 Subject: mctp: unify sockaddr_mctp types Use the more precise __kernel_sa_family_t for smctp_family, to match struct sockaddr. Also, use an unsigned int for the network member; negative networks don't make much sense. We're already using unsigned for mctp_dev and mctp_skb_cb, but need to change mctp_sock to suit. Fixes: 60fc63981693 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by: Jeremy Kerr Acked-by: Eugene Syromiatnikov Signed-off-by: David S. Miller --- Documentation/networking/mctp.rst | 10 +++++----- include/net/mctp.h | 2 +- include/uapi/linux/mctp.h | 5 +++-- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/Documentation/networking/mctp.rst b/Documentation/networking/mctp.rst index 6100cdc220f6..fa7730dbf7b9 100644 --- a/Documentation/networking/mctp.rst +++ b/Documentation/networking/mctp.rst @@ -59,11 +59,11 @@ specified with a ``sockaddr`` type, with a single-byte endpoint address: }; struct sockaddr_mctp { - unsigned short int smctp_family; - int smctp_network; - struct mctp_addr smctp_addr; - __u8 smctp_type; - __u8 smctp_tag; + __kernel_sa_family_t smctp_family; + unsigned int smctp_network; + struct mctp_addr smctp_addr; + __u8 smctp_type; + __u8 smctp_tag; }; #define MCTP_NET_ANY 0x0 diff --git a/include/net/mctp.h b/include/net/mctp.h index a824d47c3c6d..ffd2c23bd76d 100644 --- a/include/net/mctp.h +++ b/include/net/mctp.h @@ -54,7 +54,7 @@ struct mctp_sock { struct sock sk; /* bind() params */ - int bind_net; + unsigned int bind_net; mctp_eid_t bind_addr; __u8 bind_type; diff --git a/include/uapi/linux/mctp.h b/include/uapi/linux/mctp.h index 52b54d13f385..f384962d8ff2 100644 --- a/include/uapi/linux/mctp.h +++ b/include/uapi/linux/mctp.h @@ -10,6 +10,7 @@ #define __UAPI_MCTP_H #include +#include typedef __u8 mctp_eid_t; @@ -18,8 +19,8 @@ struct mctp_addr { }; struct sockaddr_mctp { - unsigned short int smctp_family; - int smctp_network; + __kernel_sa_family_t smctp_family; + unsigned int smctp_network; struct mctp_addr smctp_addr; __u8 smctp_type; __u8 smctp_tag; -- cgit v1.2.3 From 5a20dd46b8b8459382685969cf0f196ae9fb9766 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 18 Oct 2021 11:29:35 +0800 Subject: mctp: Be explicit about struct sockaddr_mctp padding We currently have some implicit padding in struct sockaddr_mctp. This patch makes this padding explicit, and ensures we have consistent layout on platforms with <32bit alignmnent. Fixes: 60fc63981693 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by: Jeremy Kerr Signed-off-by: David S. Miller --- include/uapi/linux/mctp.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/uapi/linux/mctp.h b/include/uapi/linux/mctp.h index f384962d8ff2..6acd4ccafbf7 100644 --- a/include/uapi/linux/mctp.h +++ b/include/uapi/linux/mctp.h @@ -20,10 +20,12 @@ struct mctp_addr { struct sockaddr_mctp { __kernel_sa_family_t smctp_family; + __u16 __smctp_pad0; unsigned int smctp_network; struct mctp_addr smctp_addr; __u8 smctp_type; __u8 smctp_tag; + __u8 __smctp_pad1; }; #define MCTP_NET_ANY 0x0 -- cgit v1.2.3 From d49fe5e8151711ed5276f049bc7f73e02dc141f8 Mon Sep 17 00:00:00 2001 From: Tianjia Zhang Date: Mon, 18 Oct 2021 14:42:01 +0800 Subject: selftests/tls: add SM4 algorithm dependency for tls selftests Kernel TLS test has added SM4 GCM/CCM algorithm support, but SM4 algorithm is not compiled by default, this patch add SM4 config dependency. Reported-by: Hangbin Liu Reported-by: kernel test robot Signed-off-by: Tianjia Zhang Signed-off-by: David S. Miller --- tools/testing/selftests/net/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 21b646d10b88..86ab429fe7f3 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -43,3 +43,4 @@ CONFIG_NET_ACT_TUNNEL_KEY=m CONFIG_NET_ACT_MIRRED=m CONFIG_BAREUDP=m CONFIG_IPV6_IOAM6_LWTUNNEL=y +CONFIG_CRYPTO_SM4=y -- cgit v1.2.3 From 4cce60f15c04d69eff6ffc539ab09137dbe15070 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Oct 2021 00:56:06 -0700 Subject: NIOS2: irqflags: rename a redefined register name Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro with the name "CTL_STATUS". Change the one in arch/nios2/ to be "CTL_FSTATUS" (flags status) to eliminate the build warning. In file included from ../drivers/mmc/host/tmio_mmc.c:22: drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined 31 | #define CTL_STATUS 0x1c arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition 14 | #define CTL_STATUS 0 Fixes: b31ebd8055ea ("nios2: Nios2 registers") Signed-off-by: Randy Dunlap Cc: Dinh Nguyen Signed-off-by: Dinh Nguyen --- arch/nios2/include/asm/irqflags.h | 4 ++-- arch/nios2/include/asm/registers.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/nios2/include/asm/irqflags.h b/arch/nios2/include/asm/irqflags.h index b3ec3e510706..25acf27862f9 100644 --- a/arch/nios2/include/asm/irqflags.h +++ b/arch/nios2/include/asm/irqflags.h @@ -9,7 +9,7 @@ static inline unsigned long arch_local_save_flags(void) { - return RDCTL(CTL_STATUS); + return RDCTL(CTL_FSTATUS); } /* @@ -18,7 +18,7 @@ static inline unsigned long arch_local_save_flags(void) */ static inline void arch_local_irq_restore(unsigned long flags) { - WRCTL(CTL_STATUS, flags); + WRCTL(CTL_FSTATUS, flags); } static inline void arch_local_irq_disable(void) diff --git a/arch/nios2/include/asm/registers.h b/arch/nios2/include/asm/registers.h index 183c720e454d..95b67dd16f81 100644 --- a/arch/nios2/include/asm/registers.h +++ b/arch/nios2/include/asm/registers.h @@ -11,7 +11,7 @@ #endif /* control register numbers */ -#define CTL_STATUS 0 +#define CTL_FSTATUS 0 #define CTL_ESTATUS 1 #define CTL_BSTATUS 2 #define CTL_IENABLE 3 -- cgit v1.2.3 From 9fbfabfda25d8774c5a08634fdd2da000a924890 Mon Sep 17 00:00:00 2001 From: Zqiang Date: Mon, 18 Oct 2021 18:34:22 +0800 Subject: block: fix incorrect references to disk objects When adding partitions to the disk, the reference count of the disk object is increased. then alloc partition device and called device_add(), if the device_add() return error, the reference count of the disk object will be reduced twice, at put_device(pdev) and put_disk(disk). this leads to the end of the object's life cycle prematurely, and trigger following calltrace. __init_work+0x2d/0x50 kernel/workqueue.c:519 synchronize_rcu_expedited+0x3af/0x650 kernel/rcu/tree_exp.h:847 bdi_remove_from_list mm/backing-dev.c:938 [inline] bdi_unregister+0x17f/0x5c0 mm/backing-dev.c:946 release_bdi+0xa1/0xc0 mm/backing-dev.c:968 kref_put include/linux/kref.h:65 [inline] bdi_put+0x72/0xa0 mm/backing-dev.c:976 bdev_free_inode+0x11e/0x220 block/bdev.c:408 i_callback+0x3f/0x70 fs/inode.c:226 rcu_do_batch kernel/rcu/tree.c:2508 [inline] rcu_core+0x76d/0x16c0 kernel/rcu/tree.c:2743 __do_softirq+0x1d7/0x93b kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0xf2/0x130 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x93/0xc0 making disk is NULL when calling put_disk(). Reported-by: Hao Sun Signed-off-by: Zqiang Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20211018103422.2043-1-qiang.zhang1211@gmail.com Signed-off-by: Jens Axboe --- block/partitions/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/partitions/core.c b/block/partitions/core.c index 58c4c362c94f..7bea19dd9458 100644 --- a/block/partitions/core.c +++ b/block/partitions/core.c @@ -423,6 +423,7 @@ out_del: device_del(pdev); out_put: put_device(pdev); + return ERR_PTR(err); out_put_disk: put_disk(disk); return ERR_PTR(err); -- cgit v1.2.3 From fa13843d1565d4c5b3aeb9be3343b313416bef46 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 15 Oct 2021 13:05:00 -0400 Subject: KVM: X86: fix lazy allocation of rmaps If allocation of rmaps fails, but some of the pointers have already been written, those pointers can be cleaned up when the memslot is freed, or even reused later for another attempt at allocating the rmaps. Therefore there is no need to WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be skipped lest KVM will overwrite the previous pointer and will indeed leak memory. Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index aabd3a2ec1bc..0c8b5129effd 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -11392,7 +11392,8 @@ static int memslot_rmap_alloc(struct kvm_memory_slot *slot, int level = i + 1; int lpages = __kvm_mmu_slot_lpages(slot, npages, level); - WARN_ON(slot->arch.rmap[i]); + if (slot->arch.rmap[i]) + continue; slot->arch.rmap[i] = kvcalloc(lpages, sz, GFP_KERNEL_ACCOUNT); if (!slot->arch.rmap[i]) { -- cgit v1.2.3 From baa1e5ca172ce7bf9554070139482dd7ea919528 Mon Sep 17 00:00:00 2001 From: Peter Gonda Date: Fri, 15 Oct 2021 13:32:22 -0400 Subject: KVM: SEV-ES: Set guest_state_protected after VMSA update The refactoring in commit bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") left behind the assignment to svm->vcpu.arch.guest_state_protected; add it back. Signed-off-by: Peter Gonda [Delta between v2 and v3 of Peter's patch, which had already been committed; the commit message is my own. - Paolo] Fixes: bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index e672493b5d8d..0d21d59936e5 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -618,7 +618,12 @@ static int __sev_launch_update_vmsa(struct kvm *kvm, struct kvm_vcpu *vcpu, vmsa.handle = to_kvm_svm(kvm)->sev_info.handle; vmsa.address = __sme_pa(svm->vmsa); vmsa.len = PAGE_SIZE; - return sev_issue_cmd(kvm, SEV_CMD_LAUNCH_UPDATE_VMSA, &vmsa, error); + ret = sev_issue_cmd(kvm, SEV_CMD_LAUNCH_UPDATE_VMSA, &vmsa, error); + if (ret) + return ret; + + vcpu->arch.guest_state_protected = true; + return 0; } static int sev_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp) -- cgit v1.2.3 From f7d8a19f9a056a05c5c509fa65af472a322abfee Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 12 Oct 2021 17:35:53 -0700 Subject: Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" Revert a change to open code bits of kvm_lapic_set_base() when emulating APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base and apic_hw_disabled being unsyncrhonized when the APIC is created. If kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic() will see the initialized-to-zero vcpu->arch.apic_base and decrement apic_hw_disabled without KVM ever having incremented apic_hw_disabled. Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a potential future where KVM supports RESET outside of vCPU creation, in which case all the side effects of kvm_lapic_set_base() are needed, e.g. to handle the transition from x2APIC => xAPIC. Alternatively, KVM could temporarily increment apic_hw_disabled (and call kvm_lapic_set_base() at RESET), but that's a waste of cycles and would impact the performance of other vCPUs and VMs. The other subtle side effect is that updating the xAPIC ID needs to be done at RESET regardless of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs an explicit call to kvm_apic_set_xapic_id() regardless of whether or not kvm_lapic_set_base() also performs the update. That makes stuffing the enable bit at vCPU creation slightly more palatable, as doing so affects only the apic_hw_disabled key. Opportunistically tweak the comment to explicitly call out the connection between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to call out the need to always do kvm_apic_set_xapic_id() at RESET. Underflow scenario: kvm_vm_ioctl() { kvm_vm_ioctl_create_vcpu() { kvm_arch_vcpu_create() { if (something_went_wrong) goto fail_free_lapic; /* vcpu->arch.apic_base is initialized when something_went_wrong is false. */ kvm_vcpu_reset() { kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE; } } return 0; fail_free_lapic: kvm_free_lapic() { /* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */ if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE)) static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug. } return r; } } } This (mostly) reverts commit 421221234ada41b4a9f0beeb08e30b07388bd4bd. Fixes: 421221234ada ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET") Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com Debugged-by: Tetsuo Handa Signed-off-by: Sean Christopherson Message-Id: <20211013003554.47705-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 76fb00921203..7af25304bda9 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2321,13 +2321,14 @@ EXPORT_SYMBOL_GPL(kvm_apic_update_apicv); void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { struct kvm_lapic *apic = vcpu->arch.apic; + u64 msr_val; int i; if (!init_event) { - vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | - MSR_IA32_APICBASE_ENABLE; + msr_val = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE; if (kvm_vcpu_is_reset_bsp(vcpu)) - vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP; + msr_val |= MSR_IA32_APICBASE_BSP; + kvm_lapic_set_base(vcpu, msr_val); } if (!apic) @@ -2336,11 +2337,9 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) /* Stop the timer in case it's a reset to an active apic */ hrtimer_cancel(&apic->lapic_timer.timer); - if (!init_event) { - apic->base_address = APIC_DEFAULT_PHYS_BASE; - + /* The xAPIC ID is set at RESET even if the APIC was already enabled. */ + if (!init_event) kvm_apic_set_xapic_id(apic, vcpu->vcpu_id); - } kvm_apic_set_version(apic->vcpu); for (i = 0; i < KVM_APIC_LVT_NUM; i++) @@ -2481,6 +2480,11 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu, int timer_advance_ns) lapic_timer_advance_dynamic = false; } + /* + * Stuff the APIC ENABLE bit in lieu of temporarily incrementing + * apic_hw_disabled; the full RESET value is set by kvm_lapic_reset(). + */ + vcpu->arch.apic_base = MSR_IA32_APICBASE_ENABLE; static_branch_inc(&apic_sw_disabled.key); /* sw disabled at reset */ kvm_iodevice_init(&apic->dev, &apic_mmio_ops); -- cgit v1.2.3 From 9139a7a64581c80d157027ae20e86f2f24d4292c Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 12 Oct 2021 17:35:54 -0700 Subject: KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload WARN if the static keys used to track if any vCPU has disabled its APIC are left elevated at module exit. Unlike the underflow case, nothing in the static key infrastructure will complain if a key is left elevated, and because an elevated key only affects performance, nothing in KVM will fail if either key is improperly incremented. Signed-off-by: Sean Christopherson Message-Id: <20211013003554.47705-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 7af25304bda9..d6ac32f3f650 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2946,5 +2946,7 @@ int kvm_apic_accept_events(struct kvm_vcpu *vcpu) void kvm_lapic_exit(void) { static_key_deferred_flush(&apic_hw_disabled); + WARN_ON(static_branch_unlikely(&apic_hw_disabled.key)); static_key_deferred_flush(&apic_sw_disabled); + WARN_ON(static_branch_unlikely(&apic_sw_disabled.key)); } -- cgit v1.2.3 From 01c7d2672a84dbdfa8050d073c3ea466437578fd Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 6 Oct 2021 12:17:24 +0000 Subject: KVM: kvm_stat: do not show halt_wait_ns Similar to commit 111d0bda8eeb ("tools/kvm_stat: Exempt time-based counters"), we should not show timer values in kvm_stat. Remove the new halt_wait_ns. Fixes: 87bcc5fa092f ("KVM: stats: Add halt_wait_ns stats for all architectures") Cc: Jing Zhang Cc: Stefan Raspl Signed-off-by: Christian Borntraeger Reviewed-by: Stefan Raspl Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini --- tools/kvm/kvm_stat/kvm_stat | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/kvm/kvm_stat/kvm_stat b/tools/kvm/kvm_stat/kvm_stat index b0bf56c5f120..5a5bd74f55bd 100755 --- a/tools/kvm/kvm_stat/kvm_stat +++ b/tools/kvm/kvm_stat/kvm_stat @@ -742,7 +742,7 @@ class DebugfsProvider(Provider): The fields are all available KVM debugfs files """ - exempt_list = ['halt_poll_fail_ns', 'halt_poll_success_ns'] + exempt_list = ['halt_poll_fail_ns', 'halt_poll_success_ns', 'halt_wait_ns'] fields = [field for field in self.walkdir(PATH_DEBUGFS_KVM)[2] if field not in exempt_list] -- cgit v1.2.3 From d61863c66f9b443192997613cd6aeca3f65cc313 Mon Sep 17 00:00:00 2001 From: Hao Xiang Date: Fri, 15 Oct 2021 19:59:21 +0800 Subject: KVM: VMX: Remove redundant handling of bus lock vmexit Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK. We can remove redundant handling of bus lock vmexit. Unconditionally Set exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit(). Signed-off-by: Hao Xiang Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 116b08904ac3..7fb2a3a1ca46 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -5562,9 +5562,13 @@ static int handle_encls(struct kvm_vcpu *vcpu) static int handle_bus_lock_vmexit(struct kvm_vcpu *vcpu) { - vcpu->run->exit_reason = KVM_EXIT_X86_BUS_LOCK; - vcpu->run->flags |= KVM_RUN_X86_BUS_LOCK; - return 0; + /* + * Hardware may or may not set the BUS_LOCK_DETECTED flag on BUS_LOCK + * VM-Exits. Unconditionally set the flag here and leave the handling to + * vmx_handle_exit(). + */ + to_vmx(vcpu)->exit_reason.bus_lock_detected = true; + return 1; } /* @@ -6051,9 +6055,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath) int ret = __vmx_handle_exit(vcpu, exit_fastpath); /* - * Even when current exit reason is handled by KVM internally, we - * still need to exit to user space when bus lock detected to inform - * that there is a bus lock in guest. + * Exit to user space when bus lock detected to inform that there is + * a bus lock in guest. */ if (to_vmx(vcpu)->exit_reason.bus_lock_detected) { if (ret > 0) -- cgit v1.2.3 From 9f1ee7b169afbd10c3ad254220d1b37beb5798aa Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 18 Oct 2021 06:49:18 -0400 Subject: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT), so there is no need for it to be a u64. This fixes a build error on 32-bit systems: i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io: sev.c:(.text+0x110f): undefined reference to `__udivdi3' Cc: stable@vger.kernel.org Fixes: 019057bd73d1 ("KVM: SEV-ES: fix length of string I/O") Reported-by: Naresh Kamboju Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h index 128a54b1fbf1..5d30db599e10 100644 --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -191,7 +191,7 @@ struct vcpu_svm { /* SEV-ES scratch area support */ void *ghcb_sa; - u64 ghcb_sa_len; + u32 ghcb_sa_len; bool ghcb_sa_sync; bool ghcb_sa_free; -- cgit v1.2.3 From 15bc01effefe97757ef02ca09e9d1b927ab22725 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 16 Oct 2021 15:59:49 -0500 Subject: ucounts: Fix signal ucount refcounting In commit fda31c50292a ("signal: avoid double atomic counter increments for user accounting") Linus made a clever optimization to how rlimits and the struct user_struct. Unfortunately that optimization does not work in the obvious way when moved to nested rlimits. The problem is that the last decrement of the per user namespace per user sigpending counter might also be the last decrement of the sigpending counter in the parent user namespace as well. Which means that simply freeing the leaf ucount in __free_sigqueue is not enough. Maintain the optimization and handle the tricky cases by introducing inc_rlimit_get_ucounts and dec_rlimit_put_ucounts. By moving the entire optimization into functions that perform all of the work it becomes possible to ensure that every level is handled properly. The new function inc_rlimit_get_ucounts returns 0 on failure to increment the ucount. This is different than inc_rlimit_ucounts which increments the ucounts and returns LONG_MAX if the ucount counter has exceeded it's maximum or it wrapped (to indicate the counter needs to decremented). I wish we had a single user to account all pending signals to across all of the threads of a process so this complexity was not necessary Cc: stable@vger.kernel.org Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") v1: https://lkml.kernel.org/r/87mtnavszx.fsf_-_@disp2133 Link: https://lkml.kernel.org/r/87fssytizw.fsf_-_@disp2133 Reviewed-by: Alexey Gladkov Tested-by: Rune Kleveland Tested-by: Yu Zhao Tested-by: Jordan Glover Signed-off-by: "Eric W. Biederman" --- include/linux/user_namespace.h | 2 ++ kernel/signal.c | 25 ++++++--------------- kernel/ucount.c | 49 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+), 19 deletions(-) diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index eb70cabe6e7f..33a4240e6a6f 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -127,6 +127,8 @@ static inline long get_ucounts_value(struct ucounts *ucounts, enum ucount_type t long inc_rlimit_ucounts(struct ucounts *ucounts, enum ucount_type type, long v); bool dec_rlimit_ucounts(struct ucounts *ucounts, enum ucount_type type, long v); +long inc_rlimit_get_ucounts(struct ucounts *ucounts, enum ucount_type type); +void dec_rlimit_put_ucounts(struct ucounts *ucounts, enum ucount_type type); bool is_ucounts_overlimit(struct ucounts *ucounts, enum ucount_type type, unsigned long max); static inline void set_rlimit_ucount_max(struct user_namespace *ns, diff --git a/kernel/signal.c b/kernel/signal.c index a3229add4455..13d2505a14a0 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -425,22 +425,10 @@ __sigqueue_alloc(int sig, struct task_struct *t, gfp_t gfp_flags, */ rcu_read_lock(); ucounts = task_ucounts(t); - sigpending = inc_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING, 1); - switch (sigpending) { - case 1: - if (likely(get_ucounts(ucounts))) - break; - fallthrough; - case LONG_MAX: - /* - * we need to decrease the ucount in the userns tree on any - * failure to avoid counts leaking. - */ - dec_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING, 1); - rcu_read_unlock(); - return NULL; - } + sigpending = inc_rlimit_get_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING); rcu_read_unlock(); + if (!sigpending) + return NULL; if (override_rlimit || likely(sigpending <= task_rlimit(t, RLIMIT_SIGPENDING))) { q = kmem_cache_alloc(sigqueue_cachep, gfp_flags); @@ -449,8 +437,7 @@ __sigqueue_alloc(int sig, struct task_struct *t, gfp_t gfp_flags, } if (unlikely(q == NULL)) { - if (dec_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING, 1)) - put_ucounts(ucounts); + dec_rlimit_put_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING); } else { INIT_LIST_HEAD(&q->list); q->flags = sigqueue_flags; @@ -463,8 +450,8 @@ static void __sigqueue_free(struct sigqueue *q) { if (q->flags & SIGQUEUE_PREALLOC) return; - if (q->ucounts && dec_rlimit_ucounts(q->ucounts, UCOUNT_RLIMIT_SIGPENDING, 1)) { - put_ucounts(q->ucounts); + if (q->ucounts) { + dec_rlimit_put_ucounts(q->ucounts, UCOUNT_RLIMIT_SIGPENDING); q->ucounts = NULL; } kmem_cache_free(sigqueue_cachep, q); diff --git a/kernel/ucount.c b/kernel/ucount.c index bb51849e6375..eb03f3c68375 100644 --- a/kernel/ucount.c +++ b/kernel/ucount.c @@ -284,6 +284,55 @@ bool dec_rlimit_ucounts(struct ucounts *ucounts, enum ucount_type type, long v) return (new == 0); } +static void do_dec_rlimit_put_ucounts(struct ucounts *ucounts, + struct ucounts *last, enum ucount_type type) +{ + struct ucounts *iter, *next; + for (iter = ucounts; iter != last; iter = next) { + long dec = atomic_long_add_return(-1, &iter->ucount[type]); + WARN_ON_ONCE(dec < 0); + next = iter->ns->ucounts; + if (dec == 0) + put_ucounts(iter); + } +} + +void dec_rlimit_put_ucounts(struct ucounts *ucounts, enum ucount_type type) +{ + do_dec_rlimit_put_ucounts(ucounts, NULL, type); +} + +long inc_rlimit_get_ucounts(struct ucounts *ucounts, enum ucount_type type) +{ + /* Caller must hold a reference to ucounts */ + struct ucounts *iter; + long dec, ret = 0; + + for (iter = ucounts; iter; iter = iter->ns->ucounts) { + long max = READ_ONCE(iter->ns->ucount_max[type]); + long new = atomic_long_add_return(1, &iter->ucount[type]); + if (new < 0 || new > max) + goto unwind; + if (iter == ucounts) + ret = new; + /* + * Grab an extra ucount reference for the caller when + * the rlimit count was previously 0. + */ + if (new != 1) + continue; + if (!get_ucounts(iter)) + goto dec_unwind; + } + return ret; +dec_unwind: + dec = atomic_long_add_return(-1, &iter->ucount[type]); + WARN_ON_ONCE(dec < 0); +unwind: + do_dec_rlimit_put_ucounts(ucounts, iter, type); + return 0; +} + bool is_ucounts_overlimit(struct ucounts *ucounts, enum ucount_type type, unsigned long max) { struct ucounts *iter; -- cgit v1.2.3 From 5ca6779d2f18b195cb3b66a14a271911fc609094 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 18 Oct 2021 08:36:25 -0700 Subject: drm/msm/devfreq: Restrict idle clamping to a618 for now Until we better understand the stability issues caused by frequent frequency changes, lets limit them to a618. Signed-off-by: Rob Clark Tested-by: John Stultz Tested-by: Caleb Connolly Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++ drivers/gpu/drm/msm/msm_gpu.h | 4 ++++ drivers/gpu/drm/msm/msm_gpu_devfreq.c | 3 ++- 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 33da25b81615..267a880811d6 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1838,6 +1838,13 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) adreno_cmp_rev(ADRENO_REV(6, 3, 5, ANY_ID), info->rev))) adreno_gpu->base.hw_apriv = true; + /* + * For now only clamp to idle freq for devices where this is known not + * to cause power supply issues: + */ + if (info && (info->revn == 618)) + gpu->clamp_to_idle = true; + a6xx_llc_slices_init(pdev, a6xx_gpu); ret = a6xx_set_supported_hw(&pdev->dev, config->rev); diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h index 030f82f149c2..ee25d556c8a1 100644 --- a/drivers/gpu/drm/msm/msm_gpu.h +++ b/drivers/gpu/drm/msm/msm_gpu.h @@ -203,6 +203,10 @@ struct msm_gpu { uint32_t suspend_count; struct msm_gpu_state *crashstate; + + /* Enable clamping to idle freq when inactive: */ + bool clamp_to_idle; + /* True if the hardware supports expanded apriv (a650 and newer) */ bool hw_apriv; diff --git a/drivers/gpu/drm/msm/msm_gpu_devfreq.c b/drivers/gpu/drm/msm/msm_gpu_devfreq.c index 84e98c07c900..20006d060b5b 100644 --- a/drivers/gpu/drm/msm/msm_gpu_devfreq.c +++ b/drivers/gpu/drm/msm/msm_gpu_devfreq.c @@ -200,7 +200,8 @@ void msm_devfreq_idle(struct msm_gpu *gpu) idle_freq = get_freq(gpu); - msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0); + if (gpu->clamp_to_idle) + msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0); df->idle_time = ktime_get(); df->idle_freq = idle_freq; -- cgit v1.2.3 From 8a64ef042eab8a6cec04a6c79d44d1af79b628ca Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 18 Oct 2021 12:31:01 -0700 Subject: nfp: bpf: silence bitwise vs. logical OR warning A new warning in clang points out two places in this driver where boolean expressions are being used with a bitwise OR instead of a logical one: drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning 2 errors generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this case, it does not seem like short circuiting is harmful so implement the suggested fix of changing to a logical operation to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1479 Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20211018193101.2340261-1-nathan@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/netronome/nfp/nfp_asm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfp_asm.c b/drivers/net/ethernet/netronome/nfp/nfp_asm.c index 2643ea5948f4..154399c5453f 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_asm.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_asm.c @@ -196,7 +196,7 @@ int swreg_to_unrestricted(swreg dst, swreg lreg, swreg rreg, } reg->dst_lmextn = swreg_lmextn(dst); - reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); + reg->src_lmextn = swreg_lmextn(lreg) || swreg_lmextn(rreg); return 0; } @@ -277,7 +277,7 @@ int swreg_to_restricted(swreg dst, swreg lreg, swreg rreg, } reg->dst_lmextn = swreg_lmextn(dst); - reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); + reg->src_lmextn = swreg_lmextn(lreg) || swreg_lmextn(rreg); return 0; } -- cgit v1.2.3 From ed65df63a39a3f6ed04f7258de8b6789e5021c18 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 18 Oct 2021 15:44:12 -0400 Subject: tracing: Have all levels of checks prevent recursion While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds Cc: Petr Mladek Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Thomas Gleixner Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Josh Poimboeuf Cc: Jiri Kosina Cc: Miroslav Benes Cc: Joe Lawrence Cc: Colin Ian King Cc: Masami Hiramatsu Cc: "Peter Zijlstra (Intel)" Cc: Nicholas Piggin Cc: Jisheng Zhang Cc: =?utf-8?b?546L6LSH?= Cc: Guo Ren Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) --- include/linux/trace_recursion.h | 49 ++++++++--------------------------------- kernel/trace/ftrace.c | 4 ++-- 2 files changed, 11 insertions(+), 42 deletions(-) diff --git a/include/linux/trace_recursion.h b/include/linux/trace_recursion.h index a9f9c5714e65..fe95f0922526 100644 --- a/include/linux/trace_recursion.h +++ b/include/linux/trace_recursion.h @@ -16,23 +16,8 @@ * When function tracing occurs, the following steps are made: * If arch does not support a ftrace feature: * call internal function (uses INTERNAL bits) which calls... - * If callback is registered to the "global" list, the list - * function is called and recursion checks the GLOBAL bits. - * then this function calls... * The function callback, which can use the FTRACE bits to * check for recursion. - * - * Now if the arch does not support a feature, and it calls - * the global list function which calls the ftrace callback - * all three of these steps will do a recursion protection. - * There's no reason to do one if the previous caller already - * did. The recursion that we are protecting against will - * go through the same steps again. - * - * To prevent the multiple recursion checks, if a recursion - * bit is set that is higher than the MAX bit of the current - * check, then we know that the check was made by the previous - * caller, and we can skip the current check. */ enum { /* Function recursion bits */ @@ -40,12 +25,14 @@ enum { TRACE_FTRACE_NMI_BIT, TRACE_FTRACE_IRQ_BIT, TRACE_FTRACE_SIRQ_BIT, + TRACE_FTRACE_TRANSITION_BIT, - /* INTERNAL_BITs must be greater than FTRACE_BITs */ + /* Internal use recursion bits */ TRACE_INTERNAL_BIT, TRACE_INTERNAL_NMI_BIT, TRACE_INTERNAL_IRQ_BIT, TRACE_INTERNAL_SIRQ_BIT, + TRACE_INTERNAL_TRANSITION_BIT, TRACE_BRANCH_BIT, /* @@ -86,12 +73,6 @@ enum { */ TRACE_GRAPH_NOTRACE_BIT, - /* - * When transitioning between context, the preempt_count() may - * not be correct. Allow for a single recursion to cover this case. - */ - TRACE_TRANSITION_BIT, - /* Used to prevent recursion recording from recursing. */ TRACE_RECORD_RECURSION_BIT, }; @@ -113,12 +94,10 @@ enum { #define TRACE_CONTEXT_BITS 4 #define TRACE_FTRACE_START TRACE_FTRACE_BIT -#define TRACE_FTRACE_MAX ((1 << (TRACE_FTRACE_START + TRACE_CONTEXT_BITS)) - 1) #define TRACE_LIST_START TRACE_INTERNAL_BIT -#define TRACE_LIST_MAX ((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1) -#define TRACE_CONTEXT_MASK TRACE_LIST_MAX +#define TRACE_CONTEXT_MASK ((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1) /* * Used for setting context @@ -132,6 +111,7 @@ enum { TRACE_CTX_IRQ, TRACE_CTX_SOFTIRQ, TRACE_CTX_NORMAL, + TRACE_CTX_TRANSITION, }; static __always_inline int trace_get_context_bit(void) @@ -160,45 +140,34 @@ extern void ftrace_record_recursion(unsigned long ip, unsigned long parent_ip); #endif static __always_inline int trace_test_and_set_recursion(unsigned long ip, unsigned long pip, - int start, int max) + int start) { unsigned int val = READ_ONCE(current->trace_recursion); int bit; - /* A previous recursion check was made */ - if ((val & TRACE_CONTEXT_MASK) > max) - return 0; - bit = trace_get_context_bit() + start; if (unlikely(val & (1 << bit))) { /* * It could be that preempt_count has not been updated during * a switch between contexts. Allow for a single recursion. */ - bit = TRACE_TRANSITION_BIT; + bit = TRACE_CTX_TRANSITION + start; if (val & (1 << bit)) { do_ftrace_record_recursion(ip, pip); return -1; } - } else { - /* Normal check passed, clear the transition to allow it again */ - val &= ~(1 << TRACE_TRANSITION_BIT); } val |= 1 << bit; current->trace_recursion = val; barrier(); - return bit + 1; + return bit; } static __always_inline void trace_clear_recursion(int bit) { - if (!bit) - return; - barrier(); - bit--; trace_recursion_clear(bit); } @@ -214,7 +183,7 @@ static __always_inline void trace_clear_recursion(int bit) static __always_inline int ftrace_test_recursion_trylock(unsigned long ip, unsigned long parent_ip) { - return trace_test_and_set_recursion(ip, parent_ip, TRACE_FTRACE_START, TRACE_FTRACE_MAX); + return trace_test_and_set_recursion(ip, parent_ip, TRACE_FTRACE_START); } /** diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 7efbc8aaf7f6..635fbdc9d589 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -6977,7 +6977,7 @@ __ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip, struct ftrace_ops *op; int bit; - bit = trace_test_and_set_recursion(ip, parent_ip, TRACE_LIST_START, TRACE_LIST_MAX); + bit = trace_test_and_set_recursion(ip, parent_ip, TRACE_LIST_START); if (bit < 0) return; @@ -7052,7 +7052,7 @@ static void ftrace_ops_assist_func(unsigned long ip, unsigned long parent_ip, { int bit; - bit = trace_test_and_set_recursion(ip, parent_ip, TRACE_LIST_START, TRACE_LIST_MAX); + bit = trace_test_and_set_recursion(ip, parent_ip, TRACE_LIST_START); if (bit < 0) return; -- cgit v1.2.3 From 6e3ee990c90494561921c756481d0e2125d8b895 Mon Sep 17 00:00:00 2001 From: Gaosheng Cui Date: Sat, 16 Oct 2021 15:23:50 +0800 Subject: audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null Cc: stable@vger.kernel.org Fixes: bf361231c295 ("audit: add saddr_fam filter field") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Gaosheng Cui Signed-off-by: Paul Moore --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 8dd73a64f921..b1cb1dbf7417 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -657,7 +657,7 @@ static int audit_filter_rules(struct task_struct *tsk, result = audit_comparator(audit_loginuid_set(tsk), f->op, f->val); break; case AUDIT_SADDR_FAM: - if (ctx->sockaddr) + if (ctx && ctx->sockaddr) result = audit_comparator(ctx->sockaddr->ss_family, f->op, f->val); break; -- cgit v1.2.3 From 06634d5b6e923ed0d4772aba8def5a618f44c7fe Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Mon, 18 Oct 2021 01:56:21 +0000 Subject: scsi: qla2xxx: Return -ENOMEM if kzalloc() fails The driver probing function should return < 0 for failure, otherwise kernel will treat value > 0 as success. Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com Reviewed-by: Himanshu Madhani Signed-off-by: Zheyu Ma Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index d2e40aaba734..836fedcea241 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4157,7 +4157,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, ql_dbg_pci(ql_dbg_init, ha->pdev, 0xe0ee, "%s: failed alloc dsd\n", __func__); - return 1; + return -ENOMEM; } ha->dif_bundle_kallocs++; -- cgit v1.2.3 From 7fb223d0ad801f633c78cbe42b1d1b55f5d163ad Mon Sep 17 00:00:00 2001 From: Joy Gu Date: Tue, 12 Oct 2021 12:18:33 -0700 Subject: scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()"), intended to change: bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN to: bsg_job->request->msgcode != FC_BSG_RPT_ELS but changed it to: bsg_job->request->msgcode == FC_BSG_RPT_ELS instead. Change the == to a != to avoid leaking the fcport structure or freeing unallocated memory. Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com Fixes: 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()") Reviewed-by: Bart Van Assche Signed-off-by: Joy Gu Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_bsg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 4b5d28d89d69..655cf5de604b 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -431,7 +431,7 @@ done_unmap_sg: goto done_free_fcport; done_free_fcport: - if (bsg_request->msgcode == FC_BSG_RPT_ELS) + if (bsg_request->msgcode != FC_BSG_RPT_ELS) qla2x00_free_fcport(fcport); done: return rval; -- cgit v1.2.3 From 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Mon, 18 Oct 2021 15:26:50 +0300 Subject: scsi: qla2xxx: Fix unmap of already freed sgl The sgl is freed in the target stack in target_release_cmd_kref() before calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that causes a panic if sgl is not yet DMA unmapped: NIP dma_direct_unmap_sg+0xdc/0x180 LR dma_direct_unmap_sg+0xc8/0x180 Call Trace: ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable) dma_unmap_sg_attrs+0x54/0xf0 qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx] qlt_free_cmd+0x124/0x1d0 [qla2xxx] tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx] target_put_sess_cmd+0x198/0x370 [target_core_mod] transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod] tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx] The sgl may be left unmapped in error cases of response sending. For instance, qlt_rdy_to_xfer() maps sgl and exits when session is being deleted keeping the sgl mapped. This patch removes use-after-free of the sgl and ensures that the sgl is unmapped for any command that was not sent to firmware. Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com Reviewed-by: Himanshu Madhani Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index b3478ed9b12e..7d8242c120fc 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -3319,8 +3319,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type, "RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n", vha->flags.online, qla2x00_reset_active(vha), cmd->reset_count, qpair->chip_reset); - spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); - return 0; + goto out_unmap_unlock; } /* Does F/W have an IOCBs for this request */ @@ -3445,10 +3444,6 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd) prm.sg = NULL; prm.req_cnt = 1; - /* Calculate number of entries and segments required */ - if (qlt_pci_map_calc_cnt(&prm) != 0) - return -EAGAIN; - if (!qpair->fw_started || (cmd->reset_count != qpair->chip_reset) || (cmd->sess && cmd->sess->deleted)) { /* @@ -3466,6 +3461,10 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd) return 0; } + /* Calculate number of entries and segments required */ + if (qlt_pci_map_calc_cnt(&prm) != 0) + return -EAGAIN; + spin_lock_irqsave(qpair->qp_lock_ptr, flags); /* Does F/W have an IOCBs for this request */ res = qlt_check_reserve_free_req(qpair, prm.req_cnt); @@ -3870,9 +3869,6 @@ void qlt_free_cmd(struct qla_tgt_cmd *cmd) BUG_ON(cmd->cmd_in_wq); - if (cmd->sg_mapped) - qlt_unmap_sg(cmd->vha, cmd); - if (!cmd->q_full) qlt_decr_num_pend_cmds(cmd->vha); -- cgit v1.2.3 From 4e5483b8440d01f6851a1388801088a6e0da0b56 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 18 Oct 2021 18:10:04 +0300 Subject: scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk Implement the ->restore() PM operation and set the link to off, which will force a full reset and restore. This ensures that Host Performance Booster is reset after suspend-to-disk. The Host Performance Booster feature caches logical-to-physical mapping information in the host memory. After suspend-to-disk, such information is not valid, so a full reset and restore is needed. A full reset and restore is done if the SPM level is 5 or 6, but not for other SPM levels, so this change fixes those cases. A full reset and restore also restores base address registers, so that code is removed. Link: https://lore.kernel.org/r/20211018151004.284200-2-adrian.hunter@intel.com Reviewed-by: Avri Altman Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd-pci.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index 149c1aa09103..51424557810d 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -370,20 +370,6 @@ static void ufs_intel_common_exit(struct ufs_hba *hba) static int ufs_intel_resume(struct ufs_hba *hba, enum ufs_pm_op op) { - /* - * To support S4 (suspend-to-disk) with spm_lvl other than 5, the base - * address registers must be restored because the restore kernel can - * have used different addresses. - */ - ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), - REG_UTP_TRANSFER_REQ_LIST_BASE_L); - ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), - REG_UTP_TRANSFER_REQ_LIST_BASE_H); - ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), - REG_UTP_TASK_REQ_LIST_BASE_L); - ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), - REG_UTP_TASK_REQ_LIST_BASE_H); - if (ufshcd_is_link_hibern8(hba)) { int ret = ufshcd_uic_hibern8_exit(hba); @@ -463,6 +449,18 @@ static struct ufs_hba_variant_ops ufs_intel_lkf_hba_vops = { .device_reset = ufs_intel_device_reset, }; +#ifdef CONFIG_PM_SLEEP +static int ufshcd_pci_restore(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + /* Force a full reset and restore */ + ufshcd_set_link_off(hba); + + return ufshcd_system_resume(dev); +} +#endif + /** * ufshcd_pci_shutdown - main function to put the controller in reset state * @pdev: pointer to PCI device handle @@ -546,9 +544,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) } static const struct dev_pm_ops ufshcd_pci_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) #ifdef CONFIG_PM_SLEEP + .suspend = ufshcd_system_suspend, + .resume = ufshcd_system_resume, + .freeze = ufshcd_system_suspend, + .thaw = ufshcd_system_resume, + .poweroff = ufshcd_system_suspend, + .restore = ufshcd_pci_restore, .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, #endif -- cgit v1.2.3 From 29664923725a384dc7e0f74af7c66e5ab7bb2a26 Mon Sep 17 00:00:00 2001 From: Marco Giunta Date: Mon, 18 Oct 2021 18:25:52 +0200 Subject: ALSA: usb-audio: Fix microphone sound on Jieli webcam. When a Jieli Technology USB Webcam is connected, the video part works well, but the mic sound is speeded up. On dmesg there are messages about different rates from the runtime rates, warnings about volume resolution and lastly, the log is filled, every 5 seconds, with retire_capture_urb error messages. The mic works only when ep packet size is set to wMaxPacketSize (normal sound and no more retire_capture_urb error messages). Skipping reading sample rate, fixes the messages about different rates and forcing a volume resolution, fixes warnings about volume range. I have arbitrarily choosed the value (16): I read in a comment that there should be no more than 255 levels, so 4096 (max volume) / 16 = 0-255. Signed-off-by: Marco Giunta Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 7 +++++++ 2 files changed, 14 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index a2ce535df14b..8e030b1c061a 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1198,6 +1198,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 1; } break; + case USB_ID(0x1224, 0x2a25): /* Jieli Technology USB PHY 2.0 */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index b8da4a08c458..8929d9abe8aa 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1719,6 +1719,11 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, */ fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX; break; + case USB_ID(0x1224, 0x2a25): /* Jieli Technology USB PHY 2.0 */ + /* mic works only when ep packet size is set to wMaxPacketSize */ + fp->attributes |= UAC_EP_CS_ATTR_FILL_MAX; + break; + } } @@ -1890,6 +1895,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- cgit v1.2.3 From 8913970c19915bbe773d97d42989cd85b7fdc098 Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Mon, 18 Oct 2021 15:15:22 -0700 Subject: mm/userfaultfd: selftests: fix memory corruption with thp enabled In RHEL's gating selftests we've encountered memory corruption in the uffd event test even with upstream kernel: # ./userfaultfd anon 128 4 nr_pages: 32768, nr_pages_per_cpu: 32768 bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729) bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877) bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699) bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196) testing uffd-wp with pagemap (pgsize=4096): done testing uffd-wp with pagemap (pgsize=2097152): done testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963) ERROR: faulting process failed (errno=0, line=1117) It can be easily reproduced when global thp enabled, which is the default for RHEL. It's also known as a side effect of commit 0db282ba2c12 ("selftest: use mmap instead of posix_memalign to allocate memory", 2021-07-23), which is imho right itself on using mmap() to make sure the addresses will be untagged even on arm. The problem is, for each test we allocate buffers using two allocate_area() calls. We assumed these two buffers won't affect each other, however they could, because mmap() could have found that the two buffers are near each other and having the same VMA flags, so they got merged into one VMA. It won't be a big problem if thp is not enabled, but when thp is agressively enabled it means when initializing the src buffer it could accidentally setup part of the dest buffer too when there's a shared THP that overlaps the two regions. Then some of the dest buffer won't be able to be trapped by userfaultfd missing mode, then it'll cause memory corruption as described. To fix it, do release_pages() after initializing the src buffer. Since the previous two release_pages() calls are after uffd_test_ctx_clear() which will unmap all the buffers anyway (which is stronger than release pages; as unmap() also tear town pgtables), drop them as they shouldn't really be anything useful. We can mark the Fixes tag upon 0db282ba2c12 as it's reported to only happen there, however the real "Fixes" IMHO should be 8ba6e8640844, as before that commit we'll always do explicit release_pages() before registration of uffd, and 8ba6e8640844 changed that logic by adding extra unmap/map and we didn't release the pages at the right place. Meanwhile I don't have a solid glue anyway on whether posix_memalign() could always avoid triggering this bug, hence it's safer to attach this fix to commit 8ba6e8640844. Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com Fixes: 8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each test") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931 Signed-off-by: Peter Xu Reported-by: Li Wang Tested-by: Li Wang Reviewed-by: Axel Rasmussen Cc: Andrea Arcangeli Cc: Nadav Amit Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/vm/userfaultfd.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 10ab56c2484a..60aa1a4fc69b 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -414,9 +414,6 @@ static void uffd_test_ctx_init_ext(uint64_t *features) uffd_test_ops->allocate_area((void **)&area_src); uffd_test_ops->allocate_area((void **)&area_dst); - uffd_test_ops->release_pages(area_src); - uffd_test_ops->release_pages(area_dst); - userfaultfd_open(features); count_verify = malloc(nr_pages * sizeof(unsigned long long)); @@ -437,6 +434,26 @@ static void uffd_test_ctx_init_ext(uint64_t *features) *(area_count(area_src, nr) + 1) = 1; } + /* + * After initialization of area_src, we must explicitly release pages + * for area_dst to make sure it's fully empty. Otherwise we could have + * some area_dst pages be errornously initialized with zero pages, + * hence we could hit memory corruption later in the test. + * + * One example is when THP is globally enabled, above allocate_area() + * calls could have the two areas merged into a single VMA (as they + * will have the same VMA flags so they're mergeable). When we + * initialize the area_src above, it's possible that some part of + * area_dst could have been faulted in via one huge THP that will be + * shared between area_src and area_dst. It could cause some of the + * area_dst won't be trapped by missing userfaults. + * + * This release_pages() will guarantee even if that happened, we'll + * proactively split the thp and drop any accidentally initialized + * pages within area_dst. + */ + uffd_test_ops->release_pages(area_dst); + pipefd = malloc(sizeof(int) * nr_cpus * 2); if (!pipefd) err("pipefd"); -- cgit v1.2.3 From cb185d5f1ebf900f4ae3bf84cee212e6dd035aca Mon Sep 17 00:00:00 2001 From: Nadav Amit Date: Mon, 18 Oct 2021 15:15:25 -0700 Subject: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com Fixes: 63b2d4174c4ad ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Signed-off-by: Nadav Amit Tested-by: Li Wang Reviewed-by: Peter Xu Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index 003f0d31743e..22bf14ab2d16 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -1827,9 +1827,15 @@ static int userfaultfd_writeprotect(struct userfaultfd_ctx *ctx, if (mode_wp && mode_dontwake) return -EINVAL; - ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start, - uffdio_wp.range.len, mode_wp, - &ctx->mmap_changing); + if (mmget_not_zero(ctx->mm)) { + ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start, + uffdio_wp.range.len, mode_wp, + &ctx->mmap_changing); + mmput(ctx->mm); + } else { + return -ESRCH; + } + if (ret) return ret; -- cgit v1.2.3 From 295be91f7ef0027fca2f2e4788e99731aa931834 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 18 Oct 2021 15:15:29 -0700 Subject: mm/migrate: optimize hotplug-time demotion order updates Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2. This contains two fixes for the "automatic demotion" code which was merged into 5.15: * Fix memory hotplug performance regression by watching suppressing any real action on irrelevant hotplug events. * Ensure CPU hotplug handler is registered when memory hotplug is disabled. This patch (of 2): == tl;dr == Automatic demotion opted for a simple, lazy approach to handling hotplug events. This noticeably slows down memory hotplug[1]. Optimize away updates to the demotion order when memory hotplug events should have no effect. This has no effect on CPU hotplug. There is no known problem on the CPU side and any work there will be in a separate series. == Background == Automatic demotion is a memory migration strategy to ensure that new allocations have room in faster memory tiers on tiered memory systems. The kernel maintains an array (node_demotion[]) to drive these migrations. The node_demotion[] path is calculated by starting at nodes with CPUs and then "walking" to nodes with memory. Only hotplug events which online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will actually affect the migration order. == Problem == However, the current code is lazy. It completely regenerates the migration order on *any* CPU or memory hotplug event. The logic was that these events are extremely rare and that the overhead from indiscriminate order regeneration is minimal. Part of the update logic involves a synchronize_rcu(), which is a pretty big hammer. Its overhead was large enough to be detected by some 0day tests that watch memory hotplug performance[1]. == Solution == Add a new helper (node_demotion_topo_changed()) which can differentiate between superfluous and impactful hotplug events. Skip the expensive update operation for superfluous events. == Aside: Locking == It took me a few moments to declare the locking to be safe enough for node_demotion_topo_changed() to work. It all hinges on the memory hotplug lock: During memory hotplug events, 'mem_hotplug_lock' is held for write. This ensures that two memory hotplug events can not be called simultaneously. CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides mutual exclusion between CPU hotplug events. In addition, the demotion code acquire and hold the mem_hotplug_lock for read during its CPU hotplug handlers. This provides mutual exclusion between the demotion memory hotplug callbacks and the CPU hotplug callbacks. This effectively allows treating the migration target generation code to act as if it is single-threaded. 1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen Reported-by: kernel test robot Reviewed-by: David Hildenbrand Cc: "Huang, Ying" Cc: Michal Hocko Cc: Wei Xu Cc: Oscar Salvador Cc: David Rientjes Cc: Dan Williams Cc: Greg Thelen Cc: Yang Shi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index a6a7743ee98f..a6311e46f605 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -3239,8 +3239,18 @@ static int migration_offline_cpu(unsigned int cpu) * set_migration_target_nodes(). */ static int __meminit migrate_on_reclaim_callback(struct notifier_block *self, - unsigned long action, void *arg) + unsigned long action, void *_arg) { + struct memory_notify *arg = _arg; + + /* + * Only update the node migration order when a node is + * changing status, like online->offline. This avoids + * the overhead of synchronize_rcu() in most cases. + */ + if (arg->status_change_nid < 0) + return notifier_from_errno(0); + switch (action) { case MEM_GOING_OFFLINE: /* -- cgit v1.2.3 From 76af6a054da4055305ddb28c5eb151b9ee4f74f9 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 18 Oct 2021 15:15:32 -0700 Subject: mm/migrate: add CPU hotplug to demotion #ifdef Once upon a time, the node demotion updates were driven solely by memory hotplug events. But now, there are handlers for both CPU and memory hotplug. However, the #ifdef around the code checks only memory hotplug. A system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU hotplug events. Update the #ifdef around the common code. Add memory and CPU-specific #ifdefs for their handlers. These memory/CPU #ifdefs avoid unused function warnings when their Kconfig option is off. [arnd@arndb.de: rework hotplug_memory_notifier() stub] Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen Signed-off-by: Arnd Bergmann Cc: "Huang, Ying" Cc: Michal Hocko Cc: Wei Xu Cc: Oscar Salvador Cc: David Rientjes Cc: Dan Williams Cc: David Hildenbrand Cc: Greg Thelen Cc: Yang Shi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memory.h | 5 ++++- mm/migrate.c | 42 +++++++++++++++++++++--------------------- mm/page_ext.c | 4 +--- mm/slab.c | 4 ++-- 4 files changed, 28 insertions(+), 27 deletions(-) diff --git a/include/linux/memory.h b/include/linux/memory.h index 7efc0a7c14c9..182c606adb06 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -160,7 +160,10 @@ int walk_dynamic_memory_groups(int nid, walk_memory_groups_func_t func, #define register_hotmemory_notifier(nb) register_memory_notifier(nb) #define unregister_hotmemory_notifier(nb) unregister_memory_notifier(nb) #else -#define hotplug_memory_notifier(fn, pri) ({ 0; }) +static inline int hotplug_memory_notifier(notifier_fn_t fn, int pri) +{ + return 0; +} /* These aren't inline functions due to a GCC bug. */ #define register_hotmemory_notifier(nb) ({ (void)(nb); 0; }) #define unregister_hotmemory_notifier(nb) ({ (void)(nb); }) diff --git a/mm/migrate.c b/mm/migrate.c index a6311e46f605..700112c0123d 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -3066,7 +3066,7 @@ void migrate_vma_finalize(struct migrate_vma *migrate) EXPORT_SYMBOL(migrate_vma_finalize); #endif /* CONFIG_DEVICE_PRIVATE */ -#if defined(CONFIG_MEMORY_HOTPLUG) +#if defined(CONFIG_HOTPLUG_CPU) /* Disable reclaim-based migration. */ static void __disable_all_migrate_targets(void) { @@ -3208,25 +3208,6 @@ static void set_migration_target_nodes(void) put_online_mems(); } -/* - * React to hotplug events that might affect the migration targets - * like events that online or offline NUMA nodes. - * - * The ordering is also currently dependent on which nodes have - * CPUs. That means we need CPU on/offline notification too. - */ -static int migration_online_cpu(unsigned int cpu) -{ - set_migration_target_nodes(); - return 0; -} - -static int migration_offline_cpu(unsigned int cpu) -{ - set_migration_target_nodes(); - return 0; -} - /* * This leaves migrate-on-reclaim transiently disabled between * the MEM_GOING_OFFLINE and MEM_OFFLINE events. This runs @@ -3284,6 +3265,25 @@ static int __meminit migrate_on_reclaim_callback(struct notifier_block *self, return notifier_from_errno(0); } +/* + * React to hotplug events that might affect the migration targets + * like events that online or offline NUMA nodes. + * + * The ordering is also currently dependent on which nodes have + * CPUs. That means we need CPU on/offline notification too. + */ +static int migration_online_cpu(unsigned int cpu) +{ + set_migration_target_nodes(); + return 0; +} + +static int migration_offline_cpu(unsigned int cpu) +{ + set_migration_target_nodes(); + return 0; +} + static int __init migrate_on_reclaim_init(void) { int ret; @@ -3303,4 +3303,4 @@ static int __init migrate_on_reclaim_init(void) return 0; } late_initcall(migrate_on_reclaim_init); -#endif /* CONFIG_MEMORY_HOTPLUG */ +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/mm/page_ext.c b/mm/page_ext.c index dfb91653d359..2a52fd9ed464 100644 --- a/mm/page_ext.c +++ b/mm/page_ext.c @@ -269,7 +269,7 @@ static int __meminit init_section_page_ext(unsigned long pfn, int nid) total_usage += table_size; return 0; } -#ifdef CONFIG_MEMORY_HOTPLUG + static void free_page_ext(void *addr) { if (is_vmalloc_addr(addr)) { @@ -374,8 +374,6 @@ static int __meminit page_ext_callback(struct notifier_block *self, return notifier_from_errno(ret); } -#endif - void __init page_ext_init(void) { unsigned long pfn; diff --git a/mm/slab.c b/mm/slab.c index d0f725637663..874b3f8fe80d 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1095,7 +1095,7 @@ static int slab_offline_cpu(unsigned int cpu) return 0; } -#if defined(CONFIG_NUMA) && defined(CONFIG_MEMORY_HOTPLUG) +#if defined(CONFIG_NUMA) /* * Drains freelist for a node on each slab cache, used for memory hot-remove. * Returns -EBUSY if all objects cannot be drained so that the node is not @@ -1157,7 +1157,7 @@ static int __meminit slab_memory_callback(struct notifier_block *self, out: return notifier_from_errno(ret); } -#endif /* CONFIG_NUMA && CONFIG_MEMORY_HOTPLUG */ +#endif /* CONFIG_NUMA */ /* * swap the static kmem_cache_node with kmalloced memory -- cgit v1.2.3 From a6a0251c6fce496744121b4e08c899f45270dbcc Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Mon, 18 Oct 2021 15:15:35 -0700 Subject: mm/migrate: fix CPUHP state to update node demotion order The node demotion order needs to be updated during CPU hotplug. Because whether a NUMA node has CPU may influence the demotion order. The update function should be called during CPU online/offline after the node_states[N_CPU] has been updated. That is done in CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during CPU offline. But in commit 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events"), the function to update node demotion order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline. This doesn't satisfy the order requirement. For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0 and P2, P3 in S1), the demotion order is - S0 -> NUMA_NO_NODE - S1 -> NUMA_NO_NODE After P2 and P3 is offlined, because S1 has no CPU now, the demotion order should have been changed to - S0 -> S1 - S1 -> NO_NODE but it isn't changed, because the order updating callback for CPU hotplug doesn't see the new nodemask. After that, if P1 is offlined, the demotion order is changed to the expected order as above. So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the update function on them. Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: "Huang, Ying" Cc: Thomas Gleixner Cc: Dave Hansen Cc: Yang Shi Cc: Zi Yan Cc: Michal Hocko Cc: Wei Xu Cc: Oscar Salvador Cc: David Rientjes Cc: Dan Williams Cc: David Hildenbrand Cc: Greg Thelen Cc: Keith Busch Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpuhotplug.h | 4 ++++ mm/migrate.c | 8 +++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 832d8a74fa59..991911048857 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -72,6 +72,8 @@ enum cpuhp_state { CPUHP_SLUB_DEAD, CPUHP_DEBUG_OBJ_DEAD, CPUHP_MM_WRITEBACK_DEAD, + /* Must be after CPUHP_MM_VMSTAT_DEAD */ + CPUHP_MM_DEMOTION_DEAD, CPUHP_MM_VMSTAT_DEAD, CPUHP_SOFTIRQ_DEAD, CPUHP_NET_MVNETA_DEAD, @@ -240,6 +242,8 @@ enum cpuhp_state { CPUHP_AP_BASE_CACHEINFO_ONLINE, CPUHP_AP_ONLINE_DYN, CPUHP_AP_ONLINE_DYN_END = CPUHP_AP_ONLINE_DYN + 30, + /* Must be after CPUHP_AP_ONLINE_DYN for node_states[N_CPU] update */ + CPUHP_AP_MM_DEMOTION_ONLINE, CPUHP_AP_X86_HPET_ONLINE, CPUHP_AP_X86_KVM_CLK_ONLINE, CPUHP_AP_DTPM_CPU_ONLINE, diff --git a/mm/migrate.c b/mm/migrate.c index 700112c0123d..1852d787e6ab 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -3288,9 +3288,8 @@ static int __init migrate_on_reclaim_init(void) { int ret; - ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "migrate on reclaim", - migration_online_cpu, - migration_offline_cpu); + ret = cpuhp_setup_state_nocalls(CPUHP_MM_DEMOTION_DEAD, "mm/demotion:offline", + NULL, migration_offline_cpu); /* * In the unlikely case that this fails, the automatic * migration targets may become suboptimal for nodes @@ -3298,6 +3297,9 @@ static int __init migrate_on_reclaim_init(void) * rare case, do not bother trying to do anything special. */ WARN_ON(ret < 0); + ret = cpuhp_setup_state(CPUHP_AP_MM_DEMOTION_ONLINE, "mm/demotion:online", + migration_online_cpu, NULL); + WARN_ON(ret < 0); hotplug_memory_notifier(migrate_on_reclaim_callback, 100); return 0; -- cgit v1.2.3 From 5314454ea3ff6fc746eaf71b9a7ceebed52888fa Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 18 Oct 2021 15:15:39 -0700 Subject: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara Reviewed-by: Joseph Qi Tested-by: Joseph Qi Acked-by: Gang He Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: "Markov, Andrey" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/alloc.c | 46 ++++++++++++---------------------------------- 1 file changed, 12 insertions(+), 34 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index f1cc8258d34a..5d9ae17bd443 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -7045,7 +7045,7 @@ void ocfs2_set_inode_data_inline(struct inode *inode, struct ocfs2_dinode *di) int ocfs2_convert_inline_data_to_extents(struct inode *inode, struct buffer_head *di_bh) { - int ret, i, has_data, num_pages = 0; + int ret, has_data, num_pages = 0; int need_free = 0; u32 bit_off, num; handle_t *handle; @@ -7054,26 +7054,17 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode, struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; struct ocfs2_alloc_context *data_ac = NULL; - struct page **pages = NULL; - loff_t end = osb->s_clustersize; + struct page *page = NULL; struct ocfs2_extent_tree et; int did_quota = 0; has_data = i_size_read(inode) ? 1 : 0; if (has_data) { - pages = kcalloc(ocfs2_pages_per_cluster(osb->sb), - sizeof(struct page *), GFP_NOFS); - if (pages == NULL) { - ret = -ENOMEM; - mlog_errno(ret); - return ret; - } - ret = ocfs2_reserve_clusters(osb, 1, &data_ac); if (ret) { mlog_errno(ret); - goto free_pages; + goto out; } } @@ -7093,7 +7084,8 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode, } if (has_data) { - unsigned int page_end; + unsigned int page_end = min_t(unsigned, PAGE_SIZE, + osb->s_clustersize); u64 phys; ret = dquot_alloc_space_nodirty(inode, @@ -7117,15 +7109,8 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode, */ block = phys = ocfs2_clusters_to_blocks(inode->i_sb, bit_off); - /* - * Non sparse file systems zero on extend, so no need - * to do that now. - */ - if (!ocfs2_sparse_alloc(osb) && - PAGE_SIZE < osb->s_clustersize) - end = PAGE_SIZE; - - ret = ocfs2_grab_eof_pages(inode, 0, end, pages, &num_pages); + ret = ocfs2_grab_eof_pages(inode, 0, page_end, &page, + &num_pages); if (ret) { mlog_errno(ret); need_free = 1; @@ -7136,20 +7121,15 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode, * This should populate the 1st page for us and mark * it up to date. */ - ret = ocfs2_read_inline_data(inode, pages[0], di_bh); + ret = ocfs2_read_inline_data(inode, page, di_bh); if (ret) { mlog_errno(ret); need_free = 1; goto out_unlock; } - page_end = PAGE_SIZE; - if (PAGE_SIZE > osb->s_clustersize) - page_end = osb->s_clustersize; - - for (i = 0; i < num_pages; i++) - ocfs2_map_and_dirty_page(inode, handle, 0, page_end, - pages[i], i > 0, &phys); + ocfs2_map_and_dirty_page(inode, handle, 0, page_end, page, 0, + &phys); } spin_lock(&oi->ip_lock); @@ -7180,8 +7160,8 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode, } out_unlock: - if (pages) - ocfs2_unlock_and_free_pages(pages, num_pages); + if (page) + ocfs2_unlock_and_free_pages(&page, num_pages); out_commit: if (ret < 0 && did_quota) @@ -7205,8 +7185,6 @@ out_commit: out: if (data_ac) ocfs2_free_alloc_context(data_ac); -free_pages: - kfree(pages); return ret; } -- cgit v1.2.3 From b15fa9224e6e1239414525d8d556d824701849fc Mon Sep 17 00:00:00 2001 From: Valentin Vidic Date: Mon, 18 Oct 2021 15:15:42 -0700 Subject: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr Signed-off-by: Valentin Vidic Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/super.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index c86bd4e60e20..5c914ce9b3ac 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -2167,11 +2167,17 @@ static int ocfs2_initialize_super(struct super_block *sb, } if (ocfs2_clusterinfo_valid(osb)) { + /* + * ci_stack and ci_cluster in ocfs2_cluster_info may not be null + * terminated, so make sure no overflow happens here by using + * memcpy. Destination strings will always be null terminated + * because osb is allocated using kzalloc. + */ osb->osb_stackflags = OCFS2_RAW_SB(di)->s_cluster_info.ci_stackflags; - strlcpy(osb->osb_cluster_stack, + memcpy(osb->osb_cluster_stack, OCFS2_RAW_SB(di)->s_cluster_info.ci_stack, - OCFS2_STACK_LABEL_LEN + 1); + OCFS2_STACK_LABEL_LEN); if (strlen(osb->osb_cluster_stack) != OCFS2_STACK_LABEL_LEN) { mlog(ML_ERROR, "couldn't mount because of an invalid " @@ -2180,9 +2186,9 @@ static int ocfs2_initialize_super(struct super_block *sb, status = -EINVAL; goto bail; } - strlcpy(osb->osb_cluster_name, + memcpy(osb->osb_cluster_name, OCFS2_RAW_SB(di)->s_cluster_info.ci_cluster, - OCFS2_CLUSTER_NAME_LEN + 1); + OCFS2_CLUSTER_NAME_LEN); } else { /* The empty string is identical with classic tools that * don't know about s_cluster_info. */ -- cgit v1.2.3 From 5173ed72bcfcddda21ff274ee31c6472fa150f29 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 18 Oct 2021 15:15:45 -0700 Subject: memblock: check memory total_size mem=[X][G|M] is broken on ARM64 platform, there are cases that even type.cnt is 1, but total_size is not 0 because regions are merged into 1. So only check 'cnt' is not enough, total_size should be used, othersize bootargs 'mem=[X][G|B]' not work anymore. Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com Fixes: e888fa7bb882 ("memblock: Check memory add/cap ordering") Signed-off-by: Peng Fan Reviewed-by: Mike Rapoport Cc: Geert Uytterhoeven Cc: David Hildenbrand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 5c3503c98b2f..b91df5cf54d3 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -1692,7 +1692,7 @@ void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size) if (!size) return; - if (memblock.memory.cnt <= 1) { + if (!memblock_memory->total_size) { pr_warn("%s: No memory registered yet\n", __func__); return; } -- cgit v1.2.3 From 6d2aec9e123bb9c49cb5c7fc654f25f81e688e8c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 Oct 2021 15:15:49 -0700 Subject: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com Fixes: bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") Signed-off-by: Eric Dumazet Reported-by: syzbot Acked-by: Mel Gorman Cc: "Huang, Ying" Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 1592b081c58e..d12e0608fced 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -856,16 +856,6 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags, goto out; } - if (flags & MPOL_F_NUMA_BALANCING) { - if (new && new->mode == MPOL_BIND) { - new->flags |= (MPOL_F_MOF | MPOL_F_MORON); - } else { - ret = -EINVAL; - mpol_put(new); - goto out; - } - } - ret = mpol_set_nodemask(new, nodes, scratch); if (ret) { mpol_put(new); @@ -1458,7 +1448,11 @@ static inline int sanitize_mpol_flags(int *mode, unsigned short *flags) return -EINVAL; if ((*flags & MPOL_F_STATIC_NODES) && (*flags & MPOL_F_RELATIVE_NODES)) return -EINVAL; - + if (*flags & MPOL_F_NUMA_BALANCING) { + if (*mode != MPOL_BIND) + return -EINVAL; + *flags |= (MPOL_F_MOF | MPOL_F_MORON); + } return 0; } -- cgit v1.2.3 From 2127d22509aec3a83dffb2a3c736df7ba747a7ce Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Mon, 18 Oct 2021 15:15:52 -0700 Subject: mm, slub: fix two bugs in slab_debug_trace_open() Patch series "Fixups for slub". This series contains various bug fixes for slub. We fix memoryleak, use-afer-free, NULL pointer dereferencing and so on in slub. More details can be found in the respective changelogs. This patch (of 5): It's possible that __seq_open_private() will return NULL. So we should check it before using lest dereferencing NULL pointer. And in error paths, we forgot to release private buffer via seq_release_private(). Memory will leak in these paths. Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin Reviewed-by: Vlastimil Babka Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Greg Kroah-Hartman Cc: Faiyaz Mohammed Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Kees Cook Cc: Bharata B Rao Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 3d2025f7163b..ed160b6c54f8 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -6108,9 +6108,14 @@ static int slab_debug_trace_open(struct inode *inode, struct file *filep) struct kmem_cache *s = file_inode(filep)->i_private; unsigned long *obj_map; + if (!t) + return -ENOMEM; + obj_map = bitmap_alloc(oo_objects(s->oo), GFP_KERNEL); - if (!obj_map) + if (!obj_map) { + seq_release_private(inode, filep); return -ENOMEM; + } if (strcmp(filep->f_path.dentry->d_name.name, "alloc_traces") == 0) alloc = TRACK_ALLOC; @@ -6119,6 +6124,7 @@ static int slab_debug_trace_open(struct inode *inode, struct file *filep) if (!alloc_loc_track(t, PAGE_SIZE / sizeof(struct location), GFP_KERNEL)) { bitmap_free(obj_map); + seq_release_private(inode, filep); return -ENOMEM; } -- cgit v1.2.3 From 899447f669da76cc3605665e1a95ee877bc464cc Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Mon, 18 Oct 2021 15:15:55 -0700 Subject: mm, slub: fix mismatch between reconstructed freelist depth and cnt If object's reuse is delayed, it will be excluded from the reconstructed freelist. But we forgot to adjust the cnt accordingly. So there will be a mismatch between reconstructed freelist depth and cnt. This will lead to free_debug_processing() complaining about freelist count or a incorrect slub inuse count. Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com Fixes: c3895391df38 ("kasan, slub: fix handling of kasan_slab_free hook") Signed-off-by: Miaohe Lin Reviewed-by: Vlastimil Babka Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Bharata B Rao Cc: Christoph Lameter Cc: David Rientjes Cc: Faiyaz Mohammed Cc: Greg Kroah-Hartman Cc: Joonsoo Kim Cc: Kees Cook Cc: Pekka Enberg Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index ed160b6c54f8..a56a6423d4e8 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1701,7 +1701,8 @@ static __always_inline bool slab_free_hook(struct kmem_cache *s, } static inline bool slab_free_freelist_hook(struct kmem_cache *s, - void **head, void **tail) + void **head, void **tail, + int *cnt) { void *object; @@ -1728,6 +1729,12 @@ static inline bool slab_free_freelist_hook(struct kmem_cache *s, *head = object; if (!*tail) *tail = object; + } else { + /* + * Adjust the reconstructed freelist depth + * accordingly if object's reuse is delayed. + */ + --(*cnt); } } while (object != old_tail); @@ -3480,7 +3487,7 @@ static __always_inline void slab_free(struct kmem_cache *s, struct page *page, * With KASAN enabled slab_free_freelist_hook modifies the freelist * to remove objects, whose reuse must be delayed. */ - if (slab_free_freelist_hook(s, &head, &tail)) + if (slab_free_freelist_hook(s, &head, &tail, &cnt)) do_slab_free(s, page, head, tail, cnt, addr); } -- cgit v1.2.3 From 9037c57681d25e4dcc442d940d6dbe24dd31f461 Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Mon, 18 Oct 2021 15:15:59 -0700 Subject: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com Fixes: 210e7a43fa90 ("mm: SLUB freelist randomization") Signed-off-by: Miaohe Lin Reviewed-by: Vlastimil Babka Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Bharata B Rao Cc: Christoph Lameter Cc: David Rientjes Cc: Faiyaz Mohammed Cc: Greg Kroah-Hartman Cc: Joonsoo Kim Cc: Kees Cook Cc: Pekka Enberg Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index a56a6423d4e8..bf1793fb4ce5 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4210,8 +4210,8 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags) if (alloc_kmem_cache_cpus(s)) return 0; - free_kmem_cache_nodes(s); error: + __kmem_cache_release(s); return -EINVAL; } -- cgit v1.2.3 From 67823a544414def2a36c212abadb55b23bcda00c Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Mon, 18 Oct 2021 15:16:02 -0700 Subject: mm, slub: fix potential use-after-free in slab_debugfs_fops When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free. Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin Reviewed-by: Vlastimil Babka Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Bharata B Rao Cc: Christoph Lameter Cc: David Rientjes Cc: Faiyaz Mohammed Cc: Greg Kroah-Hartman Cc: Joonsoo Kim Cc: Kees Cook Cc: Pekka Enberg Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index bf1793fb4ce5..f3df0f04a472 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4887,13 +4887,15 @@ int __kmem_cache_create(struct kmem_cache *s, slab_flags_t flags) return 0; err = sysfs_slab_add(s); - if (err) + if (err) { __kmem_cache_release(s); + return err; + } if (s->flags & SLAB_STORE_USER) debugfs_slab_add(s); - return err; + return 0; } void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller) -- cgit v1.2.3 From 3ddd60268c24bcac9d744404cc277e9dc52fe6b6 Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Mon, 18 Oct 2021 15:16:06 -0700 Subject: mm, slub: fix incorrect memcg slab count for bulk free kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects when doing bulk free. So we shouldn't call memcg_slab_free_hook() again for bulk free to avoid incorrect memcg slab count. Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com Fixes: d1b2cf6cb84a ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()") Signed-off-by: Miaohe Lin Reviewed-by: Vlastimil Babka Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Bharata B Rao Cc: Christoph Lameter Cc: David Rientjes Cc: Faiyaz Mohammed Cc: Greg Kroah-Hartman Cc: Joonsoo Kim Cc: Kees Cook Cc: Pekka Enberg Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index f3df0f04a472..d8f77346376d 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3420,7 +3420,9 @@ static __always_inline void do_slab_free(struct kmem_cache *s, struct kmem_cache_cpu *c; unsigned long tid; - memcg_slab_free_hook(s, &head, 1); + /* memcg_slab_free_hook() is already called for bulk free. */ + if (!tail) + memcg_slab_free_hook(s, &head, 1); redo: /* * Determine the currently cpus per cpu slab. -- cgit v1.2.3 From b0e901280d9860a0a35055f220e8e457f300f40a Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Mon, 18 Oct 2021 15:16:09 -0700 Subject: elfcore: correct reference to CONFIG_UML Commit 6e7b64b9dd6d ("elfcore: fix building with clang") introduces special handling for two architectures, ia64 and User Mode Linux. However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig symbol for User-Mode Linux was used. Although the directory for User Mode Linux is ./arch/um; the Kconfig symbol for this architecture is called CONFIG_UML. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: UM Referencing files: include/linux/elfcore.h Similar symbols: UML, NUMA Correct the name of the config to the intended one. [akpm@linux-foundation.org: fix um/x86_64, per Catalin] Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com Fixes: 6e7b64b9dd6d ("elfcore: fix building with clang") Signed-off-by: Lukas Bulwahn Cc: Arnd Bergmann Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Catalin Marinas Cc: Barret Rhoden Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/elfcore.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 2aaa15779d50..957ebec35aad 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -109,7 +109,7 @@ static inline int elf_core_copy_task_fpregs(struct task_struct *t, struct pt_reg #endif } -#if defined(CONFIG_UM) || defined(CONFIG_IA64) +#if (defined(CONFIG_UML) && defined(CONFIG_X86_32)) || defined(CONFIG_IA64) /* * These functions parameterize elf_core_dump in fs/binfmt_elf.c to write out * extra segments containing the gate DSO contents. Dumping its -- cgit v1.2.3 From 032146cda85566abcd1c4884d9d23e4e30a07e9a Mon Sep 17 00:00:00 2001 From: "Matthew Wilcox (Oracle)" Date: Mon, 18 Oct 2021 15:16:12 -0700 Subject: vfs: check fd has read access in kernel_read_file_from_fd() If we open a file without read access and then pass the fd to a syscall whose implementation calls kernel_read_file_from_fd(), we get a warning from __kernel_read(): if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ))) This currently affects both finit_module() and kexec_file_load(), but it could affect other syscalls in the future. Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org Fixes: b844f0ecbc56 ("vfs: define kernel_copy_file_from_fd()") Signed-off-by: Matthew Wilcox (Oracle) Reported-by: Hao Sun Reviewed-by: Kees Cook Acked-by: Christian Brauner Cc: Al Viro Cc: Mimi Zohar Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/kernel_read_file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/kernel_read_file.c b/fs/kernel_read_file.c index 87aac4c72c37..1b07550485b9 100644 --- a/fs/kernel_read_file.c +++ b/fs/kernel_read_file.c @@ -178,7 +178,7 @@ int kernel_read_file_from_fd(int fd, loff_t offset, void **buf, struct fd f = fdget(fd); int ret = -EBADF; - if (!f.file) + if (!f.file || !(f.file->f_mode & FMODE_READ)) goto out; ret = kernel_read_file(f.file, offset, buf, buf_size, file_size, id); -- cgit v1.2.3 From 79f9bc5843142b649575f887dccdf1c07ad75c20 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 18 Oct 2021 15:16:16 -0700 Subject: mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Sean Christopherson Reported-by: Darrick J. Wong Reported-by: Stephen Tested-by: Darrick J. Wong Reviewed-by: David Hildenbrand Reviewed-by: Mike Rapoport Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/secretmem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/secretmem.h b/include/linux/secretmem.h index 21c3771e6a56..988528b5da43 100644 --- a/include/linux/secretmem.h +++ b/include/linux/secretmem.h @@ -23,7 +23,7 @@ static inline bool page_is_secretmem(struct page *page) mapping = (struct address_space *) ((unsigned long)page->mapping & ~PAGE_MAPPING_FLAGS); - if (mapping != page->mapping) + if (!mapping || mapping != page->mapping) return false; return mapping->a_ops == &secretmem_aops; -- cgit v1.2.3 From 1ca7554d05ac038c98271f8968ed821266ecaa9c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 18 Oct 2021 15:16:19 -0700 Subject: mm/thp: decrease nr_thps in file's mapping on THP split Decrease nr_thps counter in file's mapping to ensure that the page cache won't be dropped excessively on file write access if page has been already split. I've tried a test scenario running a big binary, kernel remaps it with THPs, then force a THP split with /sys/kernel/debug/split_huge_pages. During any further open of that binary with O_RDWR or O_WRITEONLY kernel drops page cache for it, because of non-zero thps counter. Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski Fixes: 09d91cda0e82 ("mm,thp: avoid writes to file with THP in pagecache") Fixes: 06d3eff62d9d ("mm/thp: fix node page state in split_huge_page_to_list()") Acked-by: Matthew Wilcox (Oracle) Reviewed-by: Yang Shi Cc: Cc: Song Liu Cc: Rik van Riel Cc: "Kirill A . Shutemov" Cc: Johannes Weiner Cc: Hillf Danton Cc: Hugh Dickins Cc: William Kucharski Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 5e9ef0fc261e..92192cb086c7 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2700,12 +2700,14 @@ int split_huge_page_to_list(struct page *page, struct list_head *list) if (mapping) { int nr = thp_nr_pages(head); - if (PageSwapBacked(head)) + if (PageSwapBacked(head)) { __mod_lruvec_page_state(head, NR_SHMEM_THPS, -nr); - else + } else { __mod_lruvec_page_state(head, NR_FILE_THPS, -nr); + filemap_nr_thps_dec(mapping); + } } __split_huge_page(page, list, end); -- cgit v1.2.3 From 362d5dfc483c7786bcfff27ff48e7b6f493f7c5a Mon Sep 17 00:00:00 2001 From: Andrej Shadura Date: Mon, 18 Oct 2021 15:16:22 -0700 Subject: mailmap: add Andrej Shadura Add a mapping for my old work email for BelDisplayTech to the personal email, and make sure the Collabora email has the correct spelling of the first name. Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.uk Signed-off-by: Andrej Shadura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .mailmap | 2 ++ 1 file changed, 2 insertions(+) diff --git a/.mailmap b/.mailmap index 6e849110cb4e..90e614d2bf7e 100644 --- a/.mailmap +++ b/.mailmap @@ -33,6 +33,8 @@ Al Viro Andi Kleen Andi Shyti Andreas Herrmann +Andrej Shadura +Andrej Shadura Andrew Morton Andrew Murray Andrew Murray -- cgit v1.2.3 From d674a8f123b4096d85955c7eaabec688f29724c9 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 7 May 2021 11:18:39 +0200 Subject: can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path When the a large chunk of data send and the receiver does not send a Flow Control frame back in time, the sendmsg() does not return a error code, but the number of bytes sent corresponding to the size of the packet. If a timeout occurs the isotp_tx_timer_handler() is fired, sets sk->sk_err and calls the sk->sk_error_report() function. It was wrongly expected that the error would be propagated to user space in every case. For isotp_sendmsg() blocking on wait_event_interruptible() this is not the case. This patch fixes the problem by checking if sk->sk_err is set and returning the error to user space. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/42 Link: https://github.com/hartkopp/can-isotp/pull/43 Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by: Sottas Guillaume (LMB) Tested-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/isotp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/can/isotp.c b/net/can/isotp.c index d1f54273c0bb..df6968b28bf4 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -971,6 +971,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) if (wait_tx_done) { /* wait for complete transmission of current pdu */ wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE); + + if (sk->sk_err) + return -sk->sk_err; } return size; -- cgit v1.2.3 From 98d0a6fb7303a6f4a120b8b8ed05b86ff5db53e8 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 30 Sep 2021 08:33:13 -0400 Subject: ceph: skip existing superblocks that are blocklisted or shut down when mounting Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton Reviewed-by: Xiubo Li Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/super.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 9b1b7f4cfdd4..fd8742bae847 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -1002,16 +1002,16 @@ static int ceph_compare_super(struct super_block *sb, struct fs_context *fc) struct ceph_fs_client *new = fc->s_fs_info; struct ceph_mount_options *fsopt = new->mount_options; struct ceph_options *opt = new->client->options; - struct ceph_fs_client *other = ceph_sb_to_client(sb); + struct ceph_fs_client *fsc = ceph_sb_to_client(sb); dout("ceph_compare_super %p\n", sb); - if (compare_mount_options(fsopt, opt, other)) { + if (compare_mount_options(fsopt, opt, fsc)) { dout("monitor(s)/mount options don't match\n"); return 0; } if ((opt->flags & CEPH_OPT_FSID) && - ceph_fsid_compare(&opt->fsid, &other->client->fsid)) { + ceph_fsid_compare(&opt->fsid, &fsc->client->fsid)) { dout("fsid doesn't match\n"); return 0; } @@ -1019,6 +1019,17 @@ static int ceph_compare_super(struct super_block *sb, struct fs_context *fc) dout("flags differ\n"); return 0; } + + if (fsc->blocklisted && !ceph_test_mount_opt(fsc, CLEANRECOVER)) { + dout("client is blocklisted (and CLEANRECOVER is not set)\n"); + return 0; + } + + if (fsc->mount_state == CEPH_MOUNT_SHUTDOWN) { + dout("client has been forcibly unmounted\n"); + return 0; + } + return 1; } -- cgit v1.2.3 From 1bd85aa65d0e7b5e4d09240f492f37c569fdd431 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 7 Oct 2021 14:19:49 -0400 Subject: ceph: fix handling of "meta" errors Currently, we check the wb_err too early for directories, before all of the unsafe child requests have been waited on. In order to fix that we need to check the mapping->wb_err later nearer to the end of ceph_fsync. We also have an overly-complex method for tracking errors after blocklisting. The errors recorded in cleanup_session_requests go to a completely separate field in the inode, but we end up reporting them the same way we would for any other error (in fsync). There's no real benefit to tracking these errors in two different places, since the only reporting mechanism for them is in fsync, and we'd need to advance them both every time. Given that, we can just remove i_meta_err, and convert the places that used it to instead just use mapping->wb_err instead. That also fixes the original problem by ensuring that we do a check_and_advance of the wb_err at the end of the fsync op. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52864 Reported-by: Patrick Donnelly Signed-off-by: Jeff Layton Reviewed-by: Xiubo Li Signed-off-by: Ilya Dryomov --- fs/ceph/caps.c | 12 +++--------- fs/ceph/file.c | 1 - fs/ceph/inode.c | 2 -- fs/ceph/mds_client.c | 17 +++++------------ fs/ceph/super.h | 3 --- 5 files changed, 8 insertions(+), 27 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 3e42d0466521..8f537f1d9d1d 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2330,7 +2330,6 @@ retry: int ceph_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - struct ceph_file_info *fi = file->private_data; struct inode *inode = file->f_mapping->host; struct ceph_inode_info *ci = ceph_inode(inode); u64 flush_tid; @@ -2365,14 +2364,9 @@ int ceph_fsync(struct file *file, loff_t start, loff_t end, int datasync) if (err < 0) ret = err; - if (errseq_check(&ci->i_meta_err, READ_ONCE(fi->meta_err))) { - spin_lock(&file->f_lock); - err = errseq_check_and_advance(&ci->i_meta_err, - &fi->meta_err); - spin_unlock(&file->f_lock); - if (err < 0) - ret = err; - } + err = file_check_and_advance_wb_err(file); + if (err < 0) + ret = err; out: dout("fsync %p%s result=%d\n", inode, datasync ? " datasync" : "", ret); return ret; diff --git a/fs/ceph/file.c b/fs/ceph/file.c index d16fd2d5fd42..e61018d9764e 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -233,7 +233,6 @@ static int ceph_init_file_info(struct inode *inode, struct file *file, spin_lock_init(&fi->rw_contexts_lock); INIT_LIST_HEAD(&fi->rw_contexts); - fi->meta_err = errseq_sample(&ci->i_meta_err); fi->filp_gen = READ_ONCE(ceph_inode_to_client(inode)->filp_gen); return 0; diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 2df1e1284451..1c7574105478 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -541,8 +541,6 @@ struct inode *ceph_alloc_inode(struct super_block *sb) ceph_fscache_inode_init(ci); - ci->i_meta_err = 0; - return &ci->vfs_inode; } diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 7cad180d6deb..d64413adc0fd 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1493,7 +1493,6 @@ static void cleanup_session_requests(struct ceph_mds_client *mdsc, { struct ceph_mds_request *req; struct rb_node *p; - struct ceph_inode_info *ci; dout("cleanup_session_requests mds%d\n", session->s_mds); mutex_lock(&mdsc->mutex); @@ -1502,16 +1501,10 @@ static void cleanup_session_requests(struct ceph_mds_client *mdsc, struct ceph_mds_request, r_unsafe_item); pr_warn_ratelimited(" dropping unsafe request %llu\n", req->r_tid); - if (req->r_target_inode) { - /* dropping unsafe change of inode's attributes */ - ci = ceph_inode(req->r_target_inode); - errseq_set(&ci->i_meta_err, -EIO); - } - if (req->r_unsafe_dir) { - /* dropping unsafe directory operation */ - ci = ceph_inode(req->r_unsafe_dir); - errseq_set(&ci->i_meta_err, -EIO); - } + if (req->r_target_inode) + mapping_set_error(req->r_target_inode->i_mapping, -EIO); + if (req->r_unsafe_dir) + mapping_set_error(req->r_unsafe_dir->i_mapping, -EIO); __unregister_request(mdsc, req); } /* zero r_attempts, so kick_requests() will re-send requests */ @@ -1678,7 +1671,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, spin_unlock(&mdsc->cap_dirty_lock); if (dirty_dropped) { - errseq_set(&ci->i_meta_err, -EIO); + mapping_set_error(inode->i_mapping, -EIO); if (ci->i_wrbuffer_ref_head == 0 && ci->i_wr_ref == 0 && diff --git a/fs/ceph/super.h b/fs/ceph/super.h index a40eb14c282a..14f951cd5b61 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -429,8 +429,6 @@ struct ceph_inode_info { #ifdef CONFIG_CEPH_FSCACHE struct fscache_cookie *fscache; #endif - errseq_t i_meta_err; - struct inode vfs_inode; /* at end */ }; @@ -774,7 +772,6 @@ struct ceph_file_info { spinlock_t rw_contexts_lock; struct list_head rw_contexts; - errseq_t meta_err; u32 filp_gen; atomic_t num_locks; }; -- cgit v1.2.3 From 9d417cbe36eee7afdd85c2e871685f8dab7c2dba Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Wed, 8 Sep 2021 19:25:59 +0100 Subject: ARM: 9122/1: select HAVE_FUTEX_CMPXCHG tglx notes: This function [futex_detect_cmpxchg] is only needed when an architecture has to runtime discover whether the CPU supports it or not. ARM has unconditional support for this, so the obvious thing to do is the below. Fixes linkage failure from Clang randconfigs: kernel/futex.o:(.text.fixup+0x5c): relocation truncated to fit: R_ARM_JUMP24 against `.init.text' and boot failures for CONFIG_THUMB2_KERNEL. Link: https://github.com/ClangBuiltLinux/linux/issues/325 Comments from Nick Desaulniers: See-also: 03b8c7b623c8 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") Reported-by: Arnd Bergmann Reported-by: Nathan Chancellor Suggested-by: Thomas Gleixner Signed-off-by: Nick Desaulniers Reviewed-by: Thomas Gleixner Tested-by: Nathan Chancellor Reviewed-by: Linus Walleij Cc: stable@vger.kernel.org # v3.14+ Reviewed-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fc196421b2ce..b760dd45b734 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -92,6 +92,7 @@ config ARM select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG select HAVE_FUNCTION_TRACER if !XIP_KERNEL + select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_GCC_PLUGINS select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) select HAVE_IRQ_TIME_ACCOUNTING -- cgit v1.2.3 From 00d43d13da6c3424101aebabefab9e97e6318bee Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 21 Sep 2021 15:31:23 +0100 Subject: ARM: 9125/1: fix incorrect use of get_kernel_nofault() Commit 344179fc7ef4 ("ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()") replaced an occurrence of __get_user() with get_kernel_nofault(), but inverted the sense of the conditional in the process, resulting in no values to be printed at all. I.e., every exception stack now looks like this: Exception stack(0xc18d1fb0 to 0xc18d1ff8) 1fa0: ???????? ???????? ???????? ???????? 1fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? 1fe0: ???????? ???????? ???????? ???????? ???????? ???????? which is rather unhelpful. Fixes: 344179fc7ef4 ("ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()") Signed-off-by: Ard Biesheuvel Reviewed-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4a7edc6e848f..195dff58bafc 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -136,7 +136,7 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom, for (p = first, i = 0; i < 8 && p < top; i++, p += 4) { if (p >= bottom && p < top) { unsigned long val; - if (get_kernel_nofault(val, (unsigned long *)p)) + if (!get_kernel_nofault(val, (unsigned long *)p)) sprintf(str + i * 9, " %08lx", val); else sprintf(str + i * 9, " ????????"); -- cgit v1.2.3 From df909df0770779f1a5560c2bb641a2809655ef28 Mon Sep 17 00:00:00 2001 From: Lexi Shao Date: Thu, 23 Sep 2021 03:41:25 +0100 Subject: ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images ARM: kasan: Fix __get_user_check failure with kasan In macro __get_user_check defined in arch/arm/include/asm/uaccess.h, error code is store in register int __e(r0). When kasan is enabled, assigning value to kernel address might trigger kasan check, which unexpectedly overwrites r0 and causes undefined behavior on arm kasan images. One example is failure in do_futex and results in process soft lockup. Log: watchdog: BUG: soft lockup - CPU#0 stuck for 62946ms! [rs:main Q:Reg:1151] ... (__asan_store4) from (futex_wait_setup+0xf8/0x2b4) (futex_wait_setup) from (futex_wait+0x138/0x394) (futex_wait) from (do_futex+0x164/0xe40) (do_futex) from (sys_futex_time32+0x178/0x230) (sys_futex_time32) from (ret_fast_syscall+0x0/0x50) The soft lockup happens in function futex_wait_setup. The reason is function get_futex_value_locked always return EINVAL, thus pc jump back to retry label and causes looping. This line in function get_futex_value_locked ret = __get_user(*dest, from); is expanded to *dest = (typeof(*(p))) __r2; , in macro __get_user_check. Writing to pointer dest triggers kasan check and overwrites the return value of __get_user_x function. The assembly code of get_futex_value_locked in kernel/futex.c: ... c01f6dc8: eb0b020e bl c04b7608 <__get_user_4> // "x = (typeof(*(p))) __r2;" triggers kasan check and r0 is overwritten c01f6dCc: e1a00007 mov r0, r7 c01f6dd0: e1a05002 mov r5, r2 c01f6dd4: eb04f1e6 bl c0333574 <__asan_store4> c01f6dd8: e5875000 str r5, [r7] // save ret value of __get_user(*dest, from), which is dest address now c01f6ddc: e1a05000 mov r5, r0 ... // checking return value of __get_user failed c01f6e00: e3550000 cmp r5, #0 ... c01f6e0c: 01a00005 moveq r0, r5 // assign return value to EINVAL c01f6e10: 13e0000d mvnne r0, #13 Return value is the destination address of get_user thus certainly non-zero, so get_futex_value_locked always return EINVAL. Fix it by using a tmp vairable to store the error code before the assignment. This fix has no effects to non-kasan images thanks to compiler optimization. It only affects cases that overwrite r0 due to kasan check. This should fix bug discussed in Link: [1] https://lore.kernel.org/linux-arm-kernel/0ef7c2a5-5d8b-c5e0-63fa-31693fd4495c@gmail.com/ Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: Lexi Shao Signed-off-by: Russell King (Oracle) --- arch/arm/include/asm/uaccess.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 084d1c07c2d0..36fbc3329252 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -176,6 +176,7 @@ extern int __get_user_64t_4(void *); register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ unsigned int __ua_flags = uaccess_save_and_enable(); \ + int __tmp_e; \ switch (sizeof(*(__p))) { \ case 1: \ if (sizeof((x)) >= 8) \ @@ -203,9 +204,10 @@ extern int __get_user_64t_4(void *); break; \ default: __e = __get_user_bad(); break; \ } \ + __tmp_e = __e; \ uaccess_restore(__ua_flags); \ x = (typeof(*(p))) __r2; \ - __e; \ + __tmp_e; \ }) #define get_user(x, p) \ -- cgit v1.2.3 From e6a0c958bdf9b2e1b57501fc9433a461f0a6aadd Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Mon, 4 Oct 2021 18:03:28 +0100 Subject: ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the assembler could generate non-naturally-aligned v7wbi_tlb_fns which results in a boot failure. The original commit adding the macro missed the .align directive on this data. Link: https://github.com/ClangBuiltLinux/linux/issues/1447 Link: https://lore.kernel.org/all/0699da7b-354f-aecc-a62f-e25693209af4@linaro.org/ Debugged-by: Ard Biesheuvel Debugged-by: Nathan Chancellor Debugged-by: Richard Henderson Fixes: 66a625a88174 ("ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros") Suggested-by: Ard Biesheuvel Acked-by: Ard Biesheuvel Signed-off-by: Nick Desaulniers Tested-by: Nathan Chancellor Signed-off-by: Russell King (Oracle) --- arch/arm/mm/proc-macros.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e2c743aa2eb2..d9f7dfe2a7ed 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -340,6 +340,7 @@ ENTRY(\name\()_cache_fns) .macro define_tlb_functions name:req, flags_up:req, flags_smp .type \name\()_tlb_fns, #object + .align 2 ENTRY(\name\()_tlb_fns) .long \name\()_flush_user_tlb_range .long \name\()_flush_kern_tlb_range -- cgit v1.2.3 From eaf6cc7165c9c5aa3c2f9faa03a98598123d0afb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Oct 2021 15:30:04 +0100 Subject: ARM: 9134/1: remove duplicate memcpy() definition Both the decompressor code and the kasan logic try to override the memcpy() and memmove() definitions, which leading to a clash in a KASAN-enabled kernel with XZ decompression: arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined] #define memmove memmove ^ arch/arm/include/asm/string.h:59:9: note: previous definition is here #define memmove(dst, src, len) __memmove(dst, src, len) ^ arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined] #define memcpy memcpy ^ arch/arm/include/asm/string.h:58:9: note: previous definition is here #define memcpy(dst, src, len) __memcpy(dst, src, len) ^ Here we want the set of functions from the decompressor, so undefine the other macros before the override. Link: https://lore.kernel.org/linux-arm-kernel/CACRpkdZYJogU_SN3H9oeVq=zJkRgRT1gDz3xp59gdqWXxw-B=w@mail.gmail.com/ Link: https://lore.kernel.org/lkml/202105091112.F5rmd4By-lkp@intel.com/ Fixes: d6d51a96c7d6 ("ARM: 9014/2: Replace string mem* functions for KASan") Fixes: a7f464f3db93 ("ARM: 7001/2: Wire up support for the XZ decompressor") Reported-by: kernel test robot Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/boot/compressed/decompress.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index aa075d8372ea..74255e819831 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int); #endif #ifdef CONFIG_KERNEL_XZ +/* Prevent KASAN override of string helpers in decompressor */ +#undef memmove #define memmove memmove +#undef memcpy #define memcpy memcpy #include "../../../../lib/decompress_unxz.c" #endif -- cgit v1.2.3 From 44cc6412e66b2b84544eaf2e14cf1764301e2a80 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Oct 2021 15:30:08 +0100 Subject: ARM: 9138/1: fix link warning with XIP + frame-pointer When frame pointers are used instead of the ARM unwinder, and the kernel is built using clang with an external assembler and CONFIG_XIP_KERNEL, every file produces two warnings like: arm-linux-gnueabi-ld: warning: orphan section `.ARM.extab' from `net/mac802154/util.o' being placed in section `.ARM.extab' arm-linux-gnueabi-ld: warning: orphan section `.ARM.exidx' from `net/mac802154/util.o' being placed in section `.ARM.exidx' The same fix was already merged for the normal (non-XIP) linker script, with a longer description. Fixes: c39866f268f8 ("arm/build: Always handle .ARM.exidx and .ARM.extab sections") Reviewed-by: Kees Cook Signed-off-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/kernel/vmlinux-xip.lds.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 50136828f5b5..e0c00986487f 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -40,6 +40,10 @@ SECTIONS ARM_DISCARD *(.alt.smp.init) *(.pv_table) +#ifndef CONFIG_ARM_UNWIND + *(.ARM.exidx) *(.ARM.exidx.*) + *(.ARM.extab) *(.ARM.extab.*) +#endif } . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -- cgit v1.2.3 From 1f323127cab086e4fd618981b1e5edc396eaf0f4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Oct 2021 15:30:09 +0100 Subject: ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype With extra warnings enabled, gcc complains about this function definition: arch/arm/probes/kprobes/core.c: In function 'arch_init_kprobes': arch/arm/probes/kprobes/core.c:465:12: warning: old-style function definition [-Wold-style-definition] 465 | int __init arch_init_kprobes() Link: https://lore.kernel.org/all/20201027093057.c685a14b386acacb3c449e3d@kernel.org/ Fixes: 24ba613c9d6c ("ARM kprobes: core code") Acked-by: Masami Hiramatsu Signed-off-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/probes/kprobes/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index 27e0af78e88b..9d8634e2f12f 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -439,7 +439,7 @@ static struct undef_hook kprobes_arm_break_hook = { #endif /* !CONFIG_THUMB2_KERNEL */ -int __init arch_init_kprobes() +int __init arch_init_kprobes(void) { arm_probes_decode_init(); #ifdef CONFIG_THUMB2_KERNEL -- cgit v1.2.3 From 48ccc8edf5b90622cdc4f8878e0042ab5883e2ca Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Oct 2021 15:30:37 +0100 Subject: ARM: 9141/1: only warn about XIP address when not compile testing In randconfig builds, we sometimes come across this warning: arm-linux-gnueabi-ld: XIP start address may cause MPU programming issues While this is helpful for actual systems to figure out why it fails, the warning does not provide any benefit for build testing, so guard it in a check for CONFIG_COMPILE_TEST, which is usually set on randconfig builds. Fixes: 216218308cfb ("ARM: 8713/1: NOMMU: Support MPU in XIP configuration") Signed-off-by: Arnd Bergmann Signed-off-by: Russell King (Oracle) --- arch/arm/kernel/vmlinux-xip.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index e0c00986487f..f14c2360ea0b 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -176,7 +176,7 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA") #endif -#ifdef CONFIG_ARM_MPU +#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST) /* * Due to PMSAv7 restriction on base address and size we have to * enforce minimal alignment restrictions. It was seen that weaker -- cgit v1.2.3 From e211210098cb7490db2183d725f5c0f10463a704 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Mon, 18 Oct 2021 14:20:38 +0000 Subject: mISDN: Fix return values of the probe function During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcpci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index e501cb03f211..bd087cca1c1d 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -1994,14 +1994,14 @@ setup_hw(struct hfc_pci *hc) pci_set_master(hc->pdev); if (!hc->irq) { printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n"); - return 1; + return -EINVAL; } hc->hw.pci_io = (char __iomem *)(unsigned long)hc->pdev->resource[1].start; if (!hc->hw.pci_io) { printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n"); - return 1; + return -ENOMEM; } /* Allocate memory for FIFOS */ /* the memory needs to be on a 32k boundary within the first 4G */ @@ -2012,7 +2012,7 @@ setup_hw(struct hfc_pci *hc) if (!buffer) { printk(KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n"); - return 1; + return -ENOMEM; } hc->hw.fifos = buffer; pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle); @@ -2022,7 +2022,7 @@ setup_hw(struct hfc_pci *hc) "HFC-PCI: Error in ioremap for PCI!\n"); dma_free_coherent(&hc->pdev->dev, 0x8000, hc->hw.fifos, hc->hw.dmahandle); - return 1; + return -ENOMEM; } printk(KERN_INFO -- cgit v1.2.3 From c69b2f46876825c726bd8a97c7fa852d8932bc32 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Mon, 18 Oct 2021 14:32:57 +0000 Subject: cavium: Fix return values of the probe function During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index d1667b759522..a27227aeae88 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -1224,7 +1224,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic) if (ret < 0) { netdev_err(nic->netdev, "Req for #%d msix vectors failed\n", nic->num_vec); - return 1; + return ret; } sprintf(nic->irq_name[irq], "%s Mbox", "NICVF"); @@ -1243,7 +1243,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic) if (!nicvf_check_pf_ready(nic)) { nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0); nicvf_unregister_interrupts(nic); - return 1; + return -EIO; } return 0; -- cgit v1.2.3 From 63acd42c0d4942f74710b11c38602fb14dea7320 Mon Sep 17 00:00:00 2001 From: Woody Lin Date: Tue, 12 Oct 2021 16:35:21 +0800 Subject: sched/scs: Reset the shadow stack when idle_task_exit Commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled") removed the init_idle() call from idle_thread_get(). This was the sole call-path on hotplug that resets the Shadow Call Stack (scs) Stack Pointer (sp). Not resetting the scs-sp leads to scs overflow after enough hotplug cycles. Therefore add an explicit scs_task_reset() to the hotplug code to make sure the scs-sp does get reset on hotplug. Fixes: f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled") Signed-off-by: Woody Lin [peterz: Changelog] Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Valentin Schneider Link: https://lore.kernel.org/r/20211012083521.973587-1-woodylin@google.com --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 1bba4128a3e6..f21714ea3db8 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -8795,6 +8795,7 @@ void idle_task_exit(void) finish_arch_post_lock_switch(); } + scs_task_reset(current); /* finish_cpu(), as ran on the BP, will clean up the active_mm state */ } -- cgit v1.2.3 From 629715adc62b0ad27ab04d0aa73a71927f886910 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 16 Oct 2021 12:30:00 -0500 Subject: ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds The purpose of inc_rlimit_ucounts and dec_rlimit_ucounts in commit_creds is to change which rlimit counter is used to track a process when the credentials changes. Use the same test for both to guarantee the tracking is correct. Cc: stable@vger.kernel.org Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Link: https://lkml.kernel.org/r/87v91us0w4.fsf_-_@disp2133 Tested-by: Yu Zhao Reviewed-by: Alexey Gladkov Signed-off-by: "Eric W. Biederman" --- kernel/cred.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cred.c b/kernel/cred.c index f784e08c2fbd..3d163bfd64a9 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -501,7 +501,7 @@ int commit_creds(struct cred *new) inc_rlimit_ucounts(new->ucounts, UCOUNT_RLIMIT_NPROC, 1); rcu_assign_pointer(task->real_cred, new); rcu_assign_pointer(task->cred, new); - if (new->user != old->user) + if (new->user != old->user || new->user_ns != old->user_ns) dec_rlimit_ucounts(old->ucounts, UCOUNT_RLIMIT_NPROC, 1); alter_cred_subscribers(old, -2); -- cgit v1.2.3 From 34dc2fd6e6908499b669c7b45320cddf38b332e1 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 16 Oct 2021 12:47:51 -0500 Subject: ucounts: Proper error handling in set_cred_ucounts Instead of leaking the ucounts in new if alloc_ucounts fails, store the result of alloc_ucounts into a temporary variable, which is later assigned to new->ucounts. Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/87pms2s0v8.fsf_-_@disp2133 Tested-by: Yu Zhao Reviewed-by: Alexey Gladkov Signed-off-by: "Eric W. Biederman" --- kernel/cred.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/cred.c b/kernel/cred.c index 3d163bfd64a9..16c05dfbec4d 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -669,7 +669,7 @@ int set_cred_ucounts(struct cred *new) { struct task_struct *task = current; const struct cred *old = task->real_cred; - struct ucounts *old_ucounts = new->ucounts; + struct ucounts *new_ucounts, *old_ucounts = new->ucounts; if (new->user == old->user && new->user_ns == old->user_ns) return 0; @@ -681,9 +681,10 @@ int set_cred_ucounts(struct cred *new) if (old_ucounts && old_ucounts->ns == new->user_ns && uid_eq(old_ucounts->uid, new->euid)) return 0; - if (!(new->ucounts = alloc_ucounts(new->user_ns, new->euid))) + if (!(new_ucounts = alloc_ucounts(new->user_ns, new->euid))) return -EAGAIN; + new->ucounts = new_ucounts; if (old_ucounts) put_ucounts(old_ucounts); -- cgit v1.2.3 From bc28368596436e6e81ffc48c815b8225d96121c0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 15 Oct 2021 19:12:21 +0200 Subject: ACPI: PM: Do not turn off power resources in unknown state Commit 6381195ad7d0 ("ACPI: power: Rework turning off unused power resources") caused power resources in unknown state with reference counters equal to zero to be turned off too, but that caused issues to appear in the field, so modify the code to only turn off power resources that are known to be "on". Link: https://lore.kernel.org/linux-acpi/6faf4b92-78d5-47a4-63df-cc2bab7769d0@molgen.mpg.de/ Fixes: 6381195ad7d0 ("ACPI: power: Rework turning off unused power resources") Reported-by: Andreas K. Huettel Tested-by: Andreas K. Huettel Signed-off-by: Rafael J. Wysocki Cc: 5.14+ # 5.14+ --- drivers/acpi/power.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index b9863e22b952..f0ed4414edb1 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -1035,13 +1035,8 @@ void acpi_turn_off_unused_power_resources(void) list_for_each_entry_reverse(resource, &acpi_power_resource_list, list_node) { mutex_lock(&resource->resource_lock); - /* - * Turn off power resources in an unknown state too, because the - * platform firmware on some system expects the OS to turn off - * power resources without any users unconditionally. - */ if (!resource->ref_count && - resource->state != ACPI_POWER_RESOURCE_STATE_OFF) { + resource->state == ACPI_POWER_RESOURCE_STATE_ON) { acpi_handle_debug(resource->device.handle, "Turning OFF\n"); __acpi_power_off(resource); } -- cgit v1.2.3 From ba69fd9101f20a6d05a96ab743341d4e7b1a2178 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 18 Oct 2021 21:59:00 +0200 Subject: net: dsa: Fix an error handling path in 'dsa_switch_parse_ports_of()' If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'port' must be released. Add the missing 'of_node_put()' calls. Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/15d5310d1d55ad51c1af80775865306d92432e03.1634587046.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski --- net/dsa/dsa2.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index da18094b5a04..e9911b18bdbf 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -1374,12 +1374,15 @@ static int dsa_switch_parse_ports_of(struct dsa_switch *ds, for_each_available_child_of_node(ports, port) { err = of_property_read_u32(port, "reg", ®); - if (err) + if (err) { + of_node_put(port); goto out_put_node; + } if (reg >= ds->num_ports) { dev_err(ds->dev, "port %pOF index %u exceeds num_ports (%zu)\n", port, reg, ds->num_ports); + of_node_put(port); err = -EINVAL; goto out_put_node; } @@ -1387,8 +1390,10 @@ static int dsa_switch_parse_ports_of(struct dsa_switch *ds, dp = dsa_to_port(ds, reg); err = dsa_port_parse_of(dp, port); - if (err) + if (err) { + of_node_put(port); goto out_put_node; + } } out_put_node: -- cgit v1.2.3 From bc369921d6708542eb93da33478762f1162a5805 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Tue, 19 Oct 2021 20:31:26 +0100 Subject: io-wq: max_worker fixes First, fix nr_workers checks against max_workers, with max_worker registration, it may pretty easily happen that nr_workers > max_workers. Also, synchronise writing to acct->max_worker with wqe->lock. It's not an actual problem, but as we don't care about io_wqe_create_worker(), it's better than WRITE_ONCE()/READ_ONCE(). Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers") Reported-by: Beld Zhang Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/11f90e6b49410b7d1a88f5d04fb8d95bb86b8cf3.1634671835.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io-wq.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/io-wq.c b/fs/io-wq.c index 5bf8aa81715e..422a7ed6a9bd 100644 --- a/fs/io-wq.c +++ b/fs/io-wq.c @@ -253,7 +253,7 @@ static bool io_wqe_create_worker(struct io_wqe *wqe, struct io_wqe_acct *acct) pr_warn_once("io-wq is not configured for unbound workers"); raw_spin_lock(&wqe->lock); - if (acct->nr_workers == acct->max_workers) { + if (acct->nr_workers >= acct->max_workers) { raw_spin_unlock(&wqe->lock); return true; } @@ -1291,15 +1291,18 @@ int io_wq_max_workers(struct io_wq *wq, int *new_count) rcu_read_lock(); for_each_node(node) { + struct io_wqe *wqe = wq->wqes[node]; struct io_wqe_acct *acct; + raw_spin_lock(&wqe->lock); for (i = 0; i < IO_WQ_ACCT_NR; i++) { - acct = &wq->wqes[node]->acct[i]; + acct = &wqe->acct[i]; prev = max_t(int, acct->max_workers, prev); if (new_count[i]) acct->max_workers = new_count[i]; new_count[i] = prev; } + raw_spin_unlock(&wqe->lock); } rcu_read_unlock(); return 0; -- cgit v1.2.3 From 34061d6b76a41b1e43c19e1e50d98e5d77f77d4e Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Sat, 16 Oct 2021 08:39:54 +0900 Subject: ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests Validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests and check the free size of response buffer for these requests. Acked-by: Namjae Jeon Signed-off-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 68 +++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 52 insertions(+), 16 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 7999d8bc6892..e0f3a44e1599 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -3762,6 +3762,24 @@ static int verify_info_level(int info_level) return 0; } +static int smb2_calc_max_out_buf_len(struct ksmbd_work *work, + unsigned short hdr2_len, + unsigned int out_buf_len) +{ + int free_len; + + if (out_buf_len > work->conn->vals->max_trans_size) + return -EINVAL; + + free_len = (int)(work->response_sz - + (get_rfc1002_len(work->response_buf) + 4)) - + hdr2_len; + if (free_len < 0) + return -EINVAL; + + return min_t(int, out_buf_len, free_len); +} + int smb2_query_dir(struct ksmbd_work *work) { struct ksmbd_conn *conn = work->conn; @@ -3838,9 +3856,13 @@ int smb2_query_dir(struct ksmbd_work *work) memset(&d_info, 0, sizeof(struct ksmbd_dir_info)); d_info.wptr = (char *)rsp->Buffer; d_info.rptr = (char *)rsp->Buffer; - d_info.out_buf_len = (work->response_sz - (get_rfc1002_len(rsp_org) + 4)); - d_info.out_buf_len = min_t(int, d_info.out_buf_len, le32_to_cpu(req->OutputBufferLength)) - - sizeof(struct smb2_query_directory_rsp); + d_info.out_buf_len = + smb2_calc_max_out_buf_len(work, 8, + le32_to_cpu(req->OutputBufferLength)); + if (d_info.out_buf_len < 0) { + rc = -EINVAL; + goto err_out; + } d_info.flags = srch_flag; /* @@ -4074,12 +4096,11 @@ static int smb2_get_ea(struct ksmbd_work *work, struct ksmbd_file *fp, le32_to_cpu(req->Flags)); } - buf_free_len = work->response_sz - - (get_rfc1002_len(rsp_org) + 4) - - sizeof(struct smb2_query_info_rsp); - - if (le32_to_cpu(req->OutputBufferLength) < buf_free_len) - buf_free_len = le32_to_cpu(req->OutputBufferLength); + buf_free_len = + smb2_calc_max_out_buf_len(work, 8, + le32_to_cpu(req->OutputBufferLength)); + if (buf_free_len < 0) + return -EINVAL; rc = ksmbd_vfs_listxattr(path->dentry, &xattr_list); if (rc < 0) { @@ -4390,6 +4411,8 @@ static void get_file_stream_info(struct ksmbd_work *work, struct path *path = &fp->filp->f_path; ssize_t xattr_list_len; int nbytes = 0, streamlen, stream_name_len, next, idx = 0; + int buf_free_len; + struct smb2_query_info_req *req = ksmbd_req_buf_next(work); generic_fillattr(file_mnt_user_ns(fp->filp), file_inode(fp->filp), &stat); @@ -4403,6 +4426,12 @@ static void get_file_stream_info(struct ksmbd_work *work, goto out; } + buf_free_len = + smb2_calc_max_out_buf_len(work, 8, + le32_to_cpu(req->OutputBufferLength)); + if (buf_free_len < 0) + goto out; + while (idx < xattr_list_len) { stream_name = xattr_list + idx; streamlen = strlen(stream_name); @@ -4427,6 +4456,10 @@ static void get_file_stream_info(struct ksmbd_work *work, streamlen = snprintf(stream_buf, streamlen + 1, ":%s", &stream_name[XATTR_NAME_STREAM_LEN]); + next = sizeof(struct smb2_file_stream_info) + streamlen * 2; + if (next > buf_free_len) + break; + file_info = (struct smb2_file_stream_info *)&rsp->Buffer[nbytes]; streamlen = smbConvertToUTF16((__le16 *)file_info->StreamName, stream_buf, streamlen, @@ -4437,12 +4470,13 @@ static void get_file_stream_info(struct ksmbd_work *work, file_info->StreamSize = cpu_to_le64(stream_name_len); file_info->StreamAllocationSize = cpu_to_le64(stream_name_len); - next = sizeof(struct smb2_file_stream_info) + streamlen; nbytes += next; + buf_free_len -= next; file_info->NextEntryOffset = cpu_to_le32(next); } - if (!S_ISDIR(stat.mode)) { + if (!S_ISDIR(stat.mode) && + buf_free_len >= sizeof(struct smb2_file_stream_info) + 7 * 2) { file_info = (struct smb2_file_stream_info *) &rsp->Buffer[nbytes]; streamlen = smbConvertToUTF16((__le16 *)file_info->StreamName, @@ -7453,11 +7487,13 @@ int smb2_ioctl(struct ksmbd_work *work) } cnt_code = le32_to_cpu(req->CntCode); - out_buf_len = le32_to_cpu(req->MaxOutputResponse); - out_buf_len = - min_t(u32, work->response_sz - work->next_smb2_rsp_hdr_off - - (offsetof(struct smb2_ioctl_rsp, Buffer) - 4), - out_buf_len); + ret = smb2_calc_max_out_buf_len(work, 48, + le32_to_cpu(req->MaxOutputResponse)); + if (ret < 0) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + goto out; + } + out_buf_len = (unsigned int)ret; in_buf_len = le32_to_cpu(req->InputCount); switch (cnt_code) { -- cgit v1.2.3 From 621be84a9d1fbf0097fd058e249ec5cc4f35f3c5 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 13 Oct 2021 17:28:31 +0900 Subject: ksmbd: throttle session setup failures to avoid dictionary attacks To avoid dictionary attacks (repeated session setups rapidly sent) to connect to server, ksmbd make a delay of a 5 seconds on session setup failure to make it harder to send enough random connection requests to break into a server if a user insert the wrong password 10 times in a row. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/ksmbd_netlink.h | 2 ++ fs/ksmbd/mgmt/user_config.c | 2 +- fs/ksmbd/mgmt/user_config.h | 1 + fs/ksmbd/smb2pdu.c | 27 ++++++++++++++++++++++++--- fs/ksmbd/transport_ipc.c | 3 ++- fs/ksmbd/transport_ipc.h | 2 +- 6 files changed, 31 insertions(+), 6 deletions(-) diff --git a/fs/ksmbd/ksmbd_netlink.h b/fs/ksmbd/ksmbd_netlink.h index 2fbe2bc1e093..c6718a05d347 100644 --- a/fs/ksmbd/ksmbd_netlink.h +++ b/fs/ksmbd/ksmbd_netlink.h @@ -211,6 +211,7 @@ struct ksmbd_tree_disconnect_request { */ struct ksmbd_logout_request { __s8 account[KSMBD_REQ_MAX_ACCOUNT_NAME_SZ]; /* user account name */ + __u32 account_flags; }; /* @@ -317,6 +318,7 @@ enum KSMBD_TREE_CONN_STATUS { #define KSMBD_USER_FLAG_BAD_UID BIT(2) #define KSMBD_USER_FLAG_BAD_USER BIT(3) #define KSMBD_USER_FLAG_GUEST_ACCOUNT BIT(4) +#define KSMBD_USER_FLAG_DELAY_SESSION BIT(5) /* * Share config flags. diff --git a/fs/ksmbd/mgmt/user_config.c b/fs/ksmbd/mgmt/user_config.c index d21629ae5c89..1019d3677d55 100644 --- a/fs/ksmbd/mgmt/user_config.c +++ b/fs/ksmbd/mgmt/user_config.c @@ -55,7 +55,7 @@ struct ksmbd_user *ksmbd_alloc_user(struct ksmbd_login_response *resp) void ksmbd_free_user(struct ksmbd_user *user) { - ksmbd_ipc_logout_request(user->name); + ksmbd_ipc_logout_request(user->name, user->flags); kfree(user->name); kfree(user->passkey); kfree(user); diff --git a/fs/ksmbd/mgmt/user_config.h b/fs/ksmbd/mgmt/user_config.h index b2bb074a0150..aff80b029579 100644 --- a/fs/ksmbd/mgmt/user_config.h +++ b/fs/ksmbd/mgmt/user_config.h @@ -18,6 +18,7 @@ struct ksmbd_user { size_t passkey_sz; char *passkey; + unsigned int failed_login_count; }; static inline bool user_guest(struct ksmbd_user *user) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index e0f3a44e1599..cf7db5f71f9b 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -1779,9 +1779,30 @@ out_err: conn->mechToken = NULL; } - if (rc < 0 && sess) { - ksmbd_session_destroy(sess); - work->sess = NULL; + if (rc < 0) { + /* + * SecurityBufferOffset should be set to zero + * in session setup error response. + */ + rsp->SecurityBufferOffset = 0; + + if (sess) { + bool try_delay = false; + + /* + * To avoid dictionary attacks (repeated session setups rapidly sent) to + * connect to server, ksmbd make a delay of a 5 seconds on session setup + * failure to make it harder to send enough random connection requests + * to break into a server. + */ + if (sess->user && sess->user->flags & KSMBD_USER_FLAG_DELAY_SESSION) + try_delay = true; + + ksmbd_session_destroy(sess); + work->sess = NULL; + if (try_delay) + ssleep(5); + } } return rc; diff --git a/fs/ksmbd/transport_ipc.c b/fs/ksmbd/transport_ipc.c index 44aea33a67fa..1acf1892a466 100644 --- a/fs/ksmbd/transport_ipc.c +++ b/fs/ksmbd/transport_ipc.c @@ -601,7 +601,7 @@ int ksmbd_ipc_tree_disconnect_request(unsigned long long session_id, return ret; } -int ksmbd_ipc_logout_request(const char *account) +int ksmbd_ipc_logout_request(const char *account, int flags) { struct ksmbd_ipc_msg *msg; struct ksmbd_logout_request *req; @@ -616,6 +616,7 @@ int ksmbd_ipc_logout_request(const char *account) msg->type = KSMBD_EVENT_LOGOUT_REQUEST; req = (struct ksmbd_logout_request *)msg->payload; + req->account_flags = flags; strscpy(req->account, account, KSMBD_REQ_MAX_ACCOUNT_NAME_SZ); ret = ipc_msg_send(msg); diff --git a/fs/ksmbd/transport_ipc.h b/fs/ksmbd/transport_ipc.h index 9eacc895ffdb..5e5b90a0c187 100644 --- a/fs/ksmbd/transport_ipc.h +++ b/fs/ksmbd/transport_ipc.h @@ -25,7 +25,7 @@ ksmbd_ipc_tree_connect_request(struct ksmbd_session *sess, struct sockaddr *peer_addr); int ksmbd_ipc_tree_disconnect_request(unsigned long long session_id, unsigned long long connect_id); -int ksmbd_ipc_logout_request(const char *account); +int ksmbd_ipc_logout_request(const char *account, int flags); struct ksmbd_share_config_response * ksmbd_ipc_share_config_request(const char *name); struct ksmbd_spnego_authen_response * -- cgit v1.2.3 From 0d994cd482ee4e8e851388a70869beee51be1c54 Mon Sep 17 00:00:00 2001 From: Marios Makassikis Date: Tue, 19 Oct 2021 17:39:38 +0200 Subject: ksmbd: add buffer validation in session setup Make sure the security buffer's length/offset are valid with regards to the packet length. Acked-by: Namjae Jeon Signed-off-by: Marios Makassikis Signed-off-by: Steve French --- fs/ksmbd/auth.c | 16 +++++++++------- fs/ksmbd/smb2pdu.c | 51 +++++++++++++++++++++++++++++++-------------------- 2 files changed, 40 insertions(+), 27 deletions(-) diff --git a/fs/ksmbd/auth.c b/fs/ksmbd/auth.c index 71c989f1568d..30a92ddc1817 100644 --- a/fs/ksmbd/auth.c +++ b/fs/ksmbd/auth.c @@ -298,8 +298,8 @@ int ksmbd_decode_ntlmssp_auth_blob(struct authenticate_message *authblob, int blob_len, struct ksmbd_session *sess) { char *domain_name; - unsigned int lm_off, nt_off; - unsigned short nt_len; + unsigned int nt_off, dn_off; + unsigned short nt_len, dn_len; int ret; if (blob_len < sizeof(struct authenticate_message)) { @@ -314,15 +314,17 @@ int ksmbd_decode_ntlmssp_auth_blob(struct authenticate_message *authblob, return -EINVAL; } - lm_off = le32_to_cpu(authblob->LmChallengeResponse.BufferOffset); nt_off = le32_to_cpu(authblob->NtChallengeResponse.BufferOffset); nt_len = le16_to_cpu(authblob->NtChallengeResponse.Length); + dn_off = le32_to_cpu(authblob->DomainName.BufferOffset); + dn_len = le16_to_cpu(authblob->DomainName.Length); + + if (blob_len < (u64)dn_off + dn_len || blob_len < (u64)nt_off + nt_len) + return -EINVAL; /* TODO : use domain name that imported from configuration file */ - domain_name = smb_strndup_from_utf16((const char *)authblob + - le32_to_cpu(authblob->DomainName.BufferOffset), - le16_to_cpu(authblob->DomainName.Length), true, - sess->conn->local_nls); + domain_name = smb_strndup_from_utf16((const char *)authblob + dn_off, + dn_len, true, sess->conn->local_nls); if (IS_ERR(domain_name)) return PTR_ERR(domain_name); diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index cf7db5f71f9b..7e448df3f847 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -1257,19 +1257,13 @@ static int generate_preauth_hash(struct ksmbd_work *work) return 0; } -static int decode_negotiation_token(struct ksmbd_work *work, - struct negotiate_message *negblob) +static int decode_negotiation_token(struct ksmbd_conn *conn, + struct negotiate_message *negblob, + size_t sz) { - struct ksmbd_conn *conn = work->conn; - struct smb2_sess_setup_req *req; - int sz; - if (!conn->use_spnego) return -EINVAL; - req = work->request_buf; - sz = le16_to_cpu(req->SecurityBufferLength); - if (ksmbd_decode_negTokenInit((char *)negblob, sz, conn)) { if (ksmbd_decode_negTokenTarg((char *)negblob, sz, conn)) { conn->auth_mechs |= KSMBD_AUTH_NTLMSSP; @@ -1281,9 +1275,9 @@ static int decode_negotiation_token(struct ksmbd_work *work, } static int ntlm_negotiate(struct ksmbd_work *work, - struct negotiate_message *negblob) + struct negotiate_message *negblob, + size_t negblob_len) { - struct smb2_sess_setup_req *req = work->request_buf; struct smb2_sess_setup_rsp *rsp = work->response_buf; struct challenge_message *chgblob; unsigned char *spnego_blob = NULL; @@ -1292,8 +1286,7 @@ static int ntlm_negotiate(struct ksmbd_work *work, int sz, rc; ksmbd_debug(SMB, "negotiate phase\n"); - sz = le16_to_cpu(req->SecurityBufferLength); - rc = ksmbd_decode_ntlmssp_neg_blob(negblob, sz, work->sess); + rc = ksmbd_decode_ntlmssp_neg_blob(negblob, negblob_len, work->sess); if (rc) return rc; @@ -1361,12 +1354,23 @@ static struct ksmbd_user *session_user(struct ksmbd_conn *conn, struct authenticate_message *authblob; struct ksmbd_user *user; char *name; - int sz; + unsigned int auth_msg_len, name_off, name_len, secbuf_len; + secbuf_len = le16_to_cpu(req->SecurityBufferLength); + if (secbuf_len < sizeof(struct authenticate_message)) { + ksmbd_debug(SMB, "blob len %d too small\n", secbuf_len); + return NULL; + } authblob = user_authblob(conn, req); - sz = le32_to_cpu(authblob->UserName.BufferOffset); - name = smb_strndup_from_utf16((const char *)authblob + sz, - le16_to_cpu(authblob->UserName.Length), + name_off = le32_to_cpu(authblob->UserName.BufferOffset); + name_len = le16_to_cpu(authblob->UserName.Length); + auth_msg_len = le16_to_cpu(req->SecurityBufferOffset) + secbuf_len; + + if (auth_msg_len < (u64)name_off + name_len) + return NULL; + + name = smb_strndup_from_utf16((const char *)authblob + name_off, + name_len, true, conn->local_nls); if (IS_ERR(name)) { @@ -1612,6 +1616,7 @@ int smb2_sess_setup(struct ksmbd_work *work) struct smb2_sess_setup_rsp *rsp = work->response_buf; struct ksmbd_session *sess; struct negotiate_message *negblob; + unsigned int negblob_len, negblob_off; int rc = 0; ksmbd_debug(SMB, "Received request for session setup\n"); @@ -1692,10 +1697,16 @@ int smb2_sess_setup(struct ksmbd_work *work) if (sess->state == SMB2_SESSION_EXPIRED) sess->state = SMB2_SESSION_IN_PROGRESS; + negblob_off = le16_to_cpu(req->SecurityBufferOffset); + negblob_len = le16_to_cpu(req->SecurityBufferLength); + if (negblob_off < (offsetof(struct smb2_sess_setup_req, Buffer) - 4) || + negblob_len < offsetof(struct negotiate_message, NegotiateFlags)) + return -EINVAL; + negblob = (struct negotiate_message *)((char *)&req->hdr.ProtocolId + - le16_to_cpu(req->SecurityBufferOffset)); + negblob_off); - if (decode_negotiation_token(work, negblob) == 0) { + if (decode_negotiation_token(conn, negblob, negblob_len) == 0) { if (conn->mechToken) negblob = (struct negotiate_message *)conn->mechToken; } @@ -1719,7 +1730,7 @@ int smb2_sess_setup(struct ksmbd_work *work) sess->Preauth_HashValue = NULL; } else if (conn->preferred_auth_mech == KSMBD_AUTH_NTLMSSP) { if (negblob->MessageType == NtLmNegotiate) { - rc = ntlm_negotiate(work, negblob); + rc = ntlm_negotiate(work, negblob, negblob_len); if (rc) goto out_err; rsp->hdr.Status = -- cgit v1.2.3 From 55161e67d44fdd23900be166a81e996abd6e3be9 Mon Sep 17 00:00:00 2001 From: Eugene Crosser Date: Mon, 18 Oct 2021 20:22:50 +0200 Subject: vrf: Revert "Reset skb conntrack connection..." This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1. When an interface is enslaved in a VRF, prerouting conntrack hook is called twice: once in the context of the original input interface, and once in the context of the VRF interface. If no special precausions are taken, this leads to creation of two conntrack entries instead of one, and breaks SNAT. Commit above was intended to avoid creation of extra conntrack entries when input interface is enslaved in a VRF. It did so by resetting conntrack related data associated with the skb when it enters VRF context. However it breaks netfilter operation. Imagine a use case when conntrack zone must be assigned based on the original input interface, rather than VRF interface (that would make original interfaces indistinguishable). One could create netfilter rules similar to these: chain rawprerouting { type filter hook prerouting priority raw; iif realiface1 ct zone set 1 return iif realiface2 ct zone set 2 return } This works before the mentioned commit, but not after: zone assignment is "forgotten", and any subsequent NAT or filtering that is dependent on the conntrack zone does not work. Here is a reproducer script that demonstrates the difference in behaviour. ========== #!/bin/sh # This script demonstrates unexpected change of nftables behaviour # caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack # connection on VRF rcv" # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1 # # Before the commit, it was possible to assign conntrack zone to a # packet (or mark it for `notracking`) in the prerouting chanin, raw # priority, based on the `iif` (interface from which the packet # arrived). # After the change, # if the interface is enslaved in a VRF, such # assignment is lost. Instead, assignment based on the `iif` matching # the VRF master interface is honored. Thus it is impossible to # distinguish packets based on the original interface. # # This script demonstrates this change of behaviour: conntrack zone 1 # or 2 is assigned depending on the match with the original interface # or the vrf master interface. It can be observed that conntrack entry # appears in different zone in the kernel versions before and after # the commit. IPIN=172.30.30.1 IPOUT=172.30.30.2 PFXL=30 ip li sh vein >/dev/null 2>&1 && ip li del vein ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf nft list table testct >/dev/null 2>&1 && nft delete table testct ip li add vein type veth peer veout ip li add tvrf type vrf table 9876 ip li set veout master tvrf ip li set vein up ip li set veout up ip li set tvrf up /sbin/sysctl -w net.ipv4.conf.veout.accept_local=1 /sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0 ip addr add $IPIN/$PFXL dev vein ip addr add $IPOUT/$PFXL dev veout nft -f - <<__END__ table testct { chain rawpre { type filter hook prerouting priority raw; iif { veout, tvrf } meta nftrace set 1 iif veout ct zone set 1 return iif tvrf ct zone set 2 return notrack } chain rawout { type filter hook output priority raw; notrack } } __END__ uname -rv conntrack -F ping -W 1 -c 1 -I vein $IPOUT conntrack -L Signed-off-by: Eugene Crosser Acked-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index bf2fac913942..662e26117353 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1360,8 +1360,6 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev, bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr); bool is_ndisc = ipv6_ndisc_frame(skb); - nf_reset_ct(skb); - /* loopback, multicast & non-ND link-local traffic; do not push through * packet taps again. Reset pkt_type for upper layers to process skb. * For strict packets with a source LLA, determine the dst using the @@ -1424,8 +1422,6 @@ static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev, skb->skb_iif = vrf_dev->ifindex; IPCB(skb)->flags |= IPSKB_L3SLAVE; - nf_reset_ct(skb); - if (ipv4_is_multicast(ip_hdr(skb)->daddr)) goto out; -- cgit v1.2.3 From 496c5fe25c377ddb7815c4ce8ecfb676f051e9b6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 20 Oct 2021 20:48:26 +1100 Subject: powerpc/idle: Don't corrupt back chain when going idle In isa206_idle_insn_mayloss() we store various registers into the stack red zone, which is allowed. However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again, to 0(r1), which corrupts the stack back chain. We used to do the same in isa206_idle_insn_mayloss() itself, but we fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving GPRs"), however we missed that the macro also corrupts the back chain. Corrupting the back chain is bad for debuggability but doesn't necessarily cause a bug. However we recently changed the stack handling in some KVM code, and it now relies on the stack back chain being valid when it returns. The corruption causes that code to return with r1 pointing somewhere in kernel data, at some point LR is restored from the stack and we branch to NULL or somewhere else invalid. Only affects Power8 hosts running KVM guests, with dynamic_mt_modes enabled (which it is by default). The fixes tag below points to the commit that changed the KVM stack handling, exposing this bug. The actual corruption of the back chain has always existed since 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode"). Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()") Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au --- arch/powerpc/kernel/idle_book3s.S | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index abb719b21cae..3d97fb833834 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -126,14 +126,16 @@ _GLOBAL(idle_return_gpr_loss) /* * This is the sequence required to execute idle instructions, as * specified in ISA v2.07 (and earlier). MSR[IR] and MSR[DR] must be 0. - * - * The 0(r1) slot is used to save r2 in isa206, so use that here. + * We have to store a GPR somewhere, ptesync, then reload it, and create + * a false dependency on the result of the load. It doesn't matter which + * GPR we store, or where we store it. We have already stored r2 to the + * stack at -8(r1) in isa206_idle_insn_mayloss, so use that. */ #define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \ /* Magic NAP/SLEEP/WINKLE mode enter sequence */ \ - std r2,0(r1); \ + std r2,-8(r1); \ ptesync; \ - ld r2,0(r1); \ + ld r2,-8(r1); \ 236: cmpd cr0,r2,r2; \ bne 236b; \ IDLE_INST; \ -- cgit v1.2.3 From 787252a10d9422f3058df9a4821f389e5326c440 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 15 Oct 2021 12:39:02 -0500 Subject: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") Signed-off-by: Nathan Lynch Reviewed-by: Valentin Schneider Reviewed-by: Srikar Dronamraju Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com --- arch/powerpc/kernel/smp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 9cc7d3dbf439..605bab448f84 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -1730,8 +1730,6 @@ void __cpu_die(unsigned int cpu) void arch_cpu_idle_dead(void) { - sched_preempt_enable_no_resched(); - /* * Disable on the down path. This will be re-enabled by * start_secondary() via start_secondary_resume() below -- cgit v1.2.3 From 60484103d5c387df49bd60de4b16c88022747048 Mon Sep 17 00:00:00 2001 From: Jiaran Zhang Date: Tue, 19 Oct 2021 22:16:28 +0800 Subject: net: hns3: Add configuration of TM QCN error event Add configuration of interrupt type and fifo interrupt enable of TM QCN error event if enabled, otherwise this event will not be reported when there is error. Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()") Signed-off-by: Jiaran Zhang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 5 ++++- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c index bb9b026ae88e..93aa7f2bdc13 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c @@ -1560,8 +1560,11 @@ static int hclge_config_tm_hw_err_int(struct hclge_dev *hdev, bool en) /* configure TM QCN hw errors */ hclge_cmd_setup_basic_desc(&desc, HCLGE_TM_QCN_MEM_INT_CFG, false); - if (en) + desc.data[0] = cpu_to_le32(HCLGE_TM_QCN_ERR_INT_TYPE); + if (en) { + desc.data[0] |= cpu_to_le32(HCLGE_TM_QCN_FIFO_INT_EN); desc.data[1] = cpu_to_le32(HCLGE_TM_QCN_MEM_ERR_INT_EN); + } ret = hclge_cmd_send(&hdev->hw, &desc, 1); if (ret) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h index 07987fb8332e..d811eeefe2c0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h @@ -50,6 +50,8 @@ #define HCLGE_PPP_MPF_ECC_ERR_INT3_EN 0x003F #define HCLGE_PPP_MPF_ECC_ERR_INT3_EN_MASK 0x003F #define HCLGE_TM_SCH_ECC_ERR_INT_EN 0x3 +#define HCLGE_TM_QCN_ERR_INT_TYPE 0x29 +#define HCLGE_TM_QCN_FIFO_INT_EN 0xFFFF00 #define HCLGE_TM_QCN_MEM_ERR_INT_EN 0xFFFFFF #define HCLGE_NCSI_ERR_INT_EN 0x3 #define HCLGE_NCSI_ERR_INT_TYPE 0x9 -- cgit v1.2.3 From b63fcaab959807282e9822e659034edf95fc8bd1 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Tue, 19 Oct 2021 22:16:29 +0800 Subject: net: hns3: reset DWRR of unused tc to zero Currently, DWRR of tc will be initialized to a fixed value when this tc is enabled, but it is not been reset to 0 when this tc is disabled. It cause a problem that the DWRR of unused tc is not 0 after using tc tool to add and delete multi-tc parameters. For examples, after enabling 4 TCs and restoring to 1 TC by follow tc commands: $ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \ 8@0 8@8 8@16 8@24 hw 1 mode channel $ tc qdisc del dev eth0 root Now there is just one TC is enabled for eth0, but the tc info querying by debugfs is shown as follow: $ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info enabled tc number: 1 weight_offset: 14 TC MODE WEIGHT 0 dwrr 100 1 dwrr 100 2 dwrr 100 3 dwrr 100 4 dwrr 0 5 dwrr 0 6 dwrr 0 7 dwrr 0 This patch fixes it by resetting DWRR of tc to 0 when tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index f314dbd3ce11..95074e91a846 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -752,6 +752,8 @@ static void hclge_tm_pg_info_init(struct hclge_dev *hdev) hdev->tm_info.pg_info[i].tc_bit_map = hdev->hw_tc_map; for (k = 0; k < hdev->tm_info.num_tc; k++) hdev->tm_info.pg_info[i].tc_dwrr[k] = BW_PERCENT; + for (; k < HNAE3_MAX_TC; k++) + hdev->tm_info.pg_info[i].tc_dwrr[k] = 0; } } -- cgit v1.2.3 From 731797fdffa3d083db536e2fdd07ceb050bb40b1 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Tue, 19 Oct 2021 22:16:30 +0800 Subject: net: hns3: add limit ets dwrr bandwidth cannot be 0 If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 307c9e830510..91cb578f56b8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -137,6 +137,15 @@ static int hclge_ets_sch_mode_validate(struct hclge_dev *hdev, *changed = true; break; case IEEE_8021QAZ_TSA_ETS: + /* The hardware will switch to sp mode if bandwidth is + * 0, so limit ets bandwidth must be greater than 0. + */ + if (!ets->tc_tx_bw[i]) { + dev_err(&hdev->pdev->dev, + "tc%u ets bw cannot be 0\n", i); + return -EINVAL; + } + if (hdev->tm_info.tc_info[i].tc_sch_mode != HCLGE_SCH_MODE_DWRR) *changed = true; -- cgit v1.2.3 From adfb7b4966c0c4c63a791f202b8b3837b07a9ece Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 19 Oct 2021 22:16:31 +0800 Subject: net: hns3: fix the max tx size according to user manual Currently the max tx size supported by the hw is calculated by using the max BD num supported by the hw. According to the hw user manual, the max tx size is fixed value for both non-TSO and TSO skb. This patch updates the max tx size according to the manual. Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 ++----- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 6 ++---- 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 468b8f07bf47..ea89772e8952 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1847,7 +1847,6 @@ void hns3_shinfo_pack(struct skb_shared_info *shinfo, __u32 *size) static int hns3_skb_linearize(struct hns3_enet_ring *ring, struct sk_buff *skb, - u8 max_non_tso_bd_num, unsigned int bd_num) { /* 'bd_num == UINT_MAX' means the skb' fraglist has a @@ -1864,8 +1863,7 @@ static int hns3_skb_linearize(struct hns3_enet_ring *ring, * will not help. */ if (skb->len > HNS3_MAX_TSO_SIZE || - (!skb_is_gso(skb) && skb->len > - HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num))) { + (!skb_is_gso(skb) && skb->len > HNS3_MAX_NON_TSO_SIZE)) { u64_stats_update_begin(&ring->syncp); ring->stats.hw_limitation++; u64_stats_update_end(&ring->syncp); @@ -1900,8 +1898,7 @@ static int hns3_nic_maybe_stop_tx(struct hns3_enet_ring *ring, goto out; } - if (hns3_skb_linearize(ring, skb, max_non_tso_bd_num, - bd_num)) + if (hns3_skb_linearize(ring, skb, bd_num)) return -ENOMEM; bd_num = hns3_tx_bd_count(skb->len); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 6162d9f88e37..9d9be3665bb1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -186,11 +186,9 @@ enum hns3_nic_state { #define HNS3_MAX_BD_SIZE 65535 #define HNS3_MAX_TSO_BD_NUM 63U -#define HNS3_MAX_TSO_SIZE \ - (HNS3_MAX_BD_SIZE * HNS3_MAX_TSO_BD_NUM) +#define HNS3_MAX_TSO_SIZE 1048576U +#define HNS3_MAX_NON_TSO_SIZE 9728U -#define HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num) \ - (HNS3_MAX_BD_SIZE * (max_non_tso_bd_num)) #define HNS3_VECTOR_GL0_OFFSET 0x100 #define HNS3_VECTOR_GL1_OFFSET 0x200 -- cgit v1.2.3 From 9f9f0f19994b42b3e5e8735d41b9c5136828a76c Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 19 Oct 2021 22:16:32 +0800 Subject: net: hns3: fix for miscalculation of rx unused desc rx unused desc is the desc that need attatching new buffer before refilling to hw to receive new packet, the number of desc need attatching new buffer is calculated using next_to_use and next_to_clean. when next_to_use == next_to_clean, currently hns3 driver assumes that all the desc has the buffer attatched, but 'next_to_use == next_to_clean' also means all the desc need attatching new buffer if hw has comsumed all the desc and the driver has not attatched any buffer to the desc yet. This patch adds 'refill' in desc_cb to indicate whether a new buffer has been refilled to a desc. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 8 ++++++++ drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index ea89772e8952..2ecc9abc02d6 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3255,6 +3255,7 @@ static void hns3_buffer_detach(struct hns3_enet_ring *ring, int i) { hns3_unmap_buffer(ring, &ring->desc_cb[i]); ring->desc[i].addr = 0; + ring->desc_cb[i].refill = 0; } static void hns3_free_buffer_detach(struct hns3_enet_ring *ring, int i, @@ -3333,6 +3334,7 @@ static int hns3_alloc_and_attach_buffer(struct hns3_enet_ring *ring, int i) ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma + ring->desc_cb[i].page_offset); + ring->desc_cb[i].refill = 1; return 0; } @@ -3362,6 +3364,7 @@ static void hns3_replace_buffer(struct hns3_enet_ring *ring, int i, { hns3_unmap_buffer(ring, &ring->desc_cb[i]); ring->desc_cb[i] = *res_cb; + ring->desc_cb[i].refill = 1; ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma + ring->desc_cb[i].page_offset); ring->desc[i].rx.bd_base_info = 0; @@ -3370,6 +3373,7 @@ static void hns3_replace_buffer(struct hns3_enet_ring *ring, int i, static void hns3_reuse_buffer(struct hns3_enet_ring *ring, int i) { ring->desc_cb[i].reuse_flag = 0; + ring->desc_cb[i].refill = 1; ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma + ring->desc_cb[i].page_offset); ring->desc[i].rx.bd_base_info = 0; @@ -3476,6 +3480,9 @@ static int hns3_desc_unused(struct hns3_enet_ring *ring) int ntc = ring->next_to_clean; int ntu = ring->next_to_use; + if (unlikely(ntc == ntu && !ring->desc_cb[ntc].refill)) + return ring->desc_num; + return ((ntc >= ntu) ? 0 : ring->desc_num) + ntc - ntu; } @@ -3821,6 +3828,7 @@ static void hns3_rx_ring_move_fw(struct hns3_enet_ring *ring) { ring->desc[ring->next_to_clean].rx.bd_base_info &= cpu_to_le32(~BIT(HNS3_RXD_VLD_B)); + ring->desc_cb[ring->next_to_clean].refill = 0; ring->next_to_clean += 1; if (unlikely(ring->next_to_clean == ring->desc_num)) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 9d9be3665bb1..f09a61d9c626 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -330,6 +330,7 @@ struct hns3_desc_cb { u32 length; /* length of the buffer */ u16 reuse_flag; + u16 refill; /* desc type, used by the ring user to mark the type of the priv data */ u16 type; -- cgit v1.2.3 From 68752b24f51a71d4f350a764d890b670f59062c5 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 19 Oct 2021 22:16:33 +0800 Subject: net: hns3: schedule the polling again when allocation fails Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 2ecc9abc02d6..4b886a13e079 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3486,7 +3486,8 @@ static int hns3_desc_unused(struct hns3_enet_ring *ring) return ((ntc >= ntu) ? 0 : ring->desc_num) + ntc - ntu; } -static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring, +/* Return true if there is any allocation failure */ +static bool hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring, int cleand_count) { struct hns3_desc_cb *desc_cb; @@ -3511,7 +3512,10 @@ static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring, hns3_rl_err(ring_to_netdev(ring), "alloc rx buffer failed: %d\n", ret); - break; + + writel(i, ring->tqp->io_base + + HNS3_RING_RX_RING_HEAD_REG); + return true; } hns3_replace_buffer(ring, ring->next_to_use, &res_cbs); @@ -3524,6 +3528,7 @@ static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring, } writel(i, ring->tqp->io_base + HNS3_RING_RX_RING_HEAD_REG); + return false; } static bool hns3_can_reuse_page(struct hns3_desc_cb *cb) @@ -4175,6 +4180,7 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget, { #define RCB_NOF_ALLOC_RX_BUFF_ONCE 16 int unused_count = hns3_desc_unused(ring); + bool failure = false; int recv_pkts = 0; int err; @@ -4183,9 +4189,9 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget, while (recv_pkts < budget) { /* Reuse or realloc buffers */ if (unused_count >= RCB_NOF_ALLOC_RX_BUFF_ONCE) { - hns3_nic_alloc_rx_buffers(ring, unused_count); - unused_count = hns3_desc_unused(ring) - - ring->pending_buf; + failure = failure || + hns3_nic_alloc_rx_buffers(ring, unused_count); + unused_count = 0; } /* Poll one pkt */ @@ -4204,11 +4210,7 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget, } out: - /* Make all data has been write before submit */ - if (unused_count > 0) - hns3_nic_alloc_rx_buffers(ring, unused_count); - - return recv_pkts; + return failure ? budget : recv_pkts; } static void hns3_update_rx_int_coalesce(struct hns3_enet_tqp_vector *tqp_vector) -- cgit v1.2.3 From 1385cc81baeb3bd8cbbbcdc1557f038ac1712529 Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Tue, 19 Oct 2021 22:16:34 +0800 Subject: net: hns3: fix vf reset workqueue cannot exit The task of VF reset is performed through the workqueue. It checks the value of hdev->reset_pending to determine whether to exit the loop. However, the value of hdev->reset_pending may also be assigned by the interrupt function hclgevf_misc_irq_handle(), which may cause the loop fail to exit and keep occupying the workqueue. This loop is not necessary, so remove it and the workqueue will be rescheduled if the reset needs to be retried or a new reset occurs. Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 5fdac8685f95..bef6b98e2f50 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2273,9 +2273,9 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev) hdev->reset_attempts = 0; hdev->last_reset_time = jiffies; - while ((hdev->reset_type = - hclgevf_get_reset_level(hdev, &hdev->reset_pending)) - != HNAE3_NONE_RESET) + hdev->reset_type = + hclgevf_get_reset_level(hdev, &hdev->reset_pending); + if (hdev->reset_type != HNAE3_NONE_RESET) hclgevf_reset(hdev); } else if (test_and_clear_bit(HCLGEVF_RESET_REQUESTED, &hdev->reset_state)) { -- cgit v1.2.3 From 0dd8a25f355b4df2d41c08df1716340854c7d4c5 Mon Sep 17 00:00:00 2001 From: Peng Li Date: Tue, 19 Oct 2021 22:16:35 +0800 Subject: net: hns3: disable sriov before unload hclge layer HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.c | 21 +++++++++++++++++++++ drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + 3 files changed, 23 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c index eef1b2764d34..67b0bf310daa 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c @@ -10,6 +10,27 @@ static LIST_HEAD(hnae3_ae_algo_list); static LIST_HEAD(hnae3_client_list); static LIST_HEAD(hnae3_ae_dev_list); +void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo) +{ + const struct pci_device_id *pci_id; + struct hnae3_ae_dev *ae_dev; + + if (!ae_algo) + return; + + list_for_each_entry(ae_dev, &hnae3_ae_dev_list, node) { + if (!hnae3_get_bit(ae_dev->flag, HNAE3_DEV_INITED_B)) + continue; + + pci_id = pci_match_id(ae_algo->pdev_id_table, ae_dev->pdev); + if (!pci_id) + continue; + if (IS_ENABLED(CONFIG_PCI_IOV)) + pci_disable_sriov(ae_dev->pdev); + } +} +EXPORT_SYMBOL(hnae3_unregister_ae_algo_prepare); + /* we are keeping things simple and using single lock for all the * list. This is a non-critical code so other updations, if happen * in parallel, can wait. diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index 8ba21d6dc220..d701451596c8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -853,6 +853,7 @@ struct hnae3_handle { int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev); void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev); +void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo); void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo); void hnae3_register_ae_algo(struct hnae3_ae_algo *ae_algo); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index f5b8d1fee0f1..dcd40cc73082 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -13065,6 +13065,7 @@ static int hclge_init(void) static void hclge_exit(void) { + hnae3_unregister_ae_algo_prepare(&ae_algo); hnae3_unregister_ae_algo(&ae_algo); destroy_workqueue(hclge_wq); } -- cgit v1.2.3 From 641e3fd1a038c68045bbf89d78502f4b4bbc7284 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 19 Oct 2021 22:49:16 +0200 Subject: nfc: st95hf: Make spi remove() callback return zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If something goes wrong in the remove callback, returning an error code just results in an error message. The device still disappears. So don't skip disabling the regulator in st95hf_remove() if resetting the controller via spi fails. Also don't return an error code which just results in two error messages. Signed-off-by: Uwe Kleine-König Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/nfc/st95hf/core.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c index d16cf3ff644e..b23f47936473 100644 --- a/drivers/nfc/st95hf/core.c +++ b/drivers/nfc/st95hf/core.c @@ -1226,11 +1226,9 @@ static int st95hf_remove(struct spi_device *nfc_spi_dev) &reset_cmd, ST95HF_RESET_CMD_LEN, ASYNC); - if (result) { + if (result) dev_err(&spictx->spidev->dev, "ST95HF reset failed in remove() err = %d\n", result); - return result; - } /* wait for 3 ms to complete the controller reset process */ usleep_range(3000, 4000); @@ -1239,7 +1237,7 @@ static int st95hf_remove(struct spi_device *nfc_spi_dev) if (stcontext->st95hf_supply) regulator_disable(stcontext->st95hf_supply); - return result; + return 0; } /* Register as SPI protocol driver */ -- cgit v1.2.3 From 3cb958027cb8b78d3ee639ce9af54c2ef1bf964f Mon Sep 17 00:00:00 2001 From: Kurt Kanzenbach Date: Wed, 20 Oct 2021 09:04:33 +0200 Subject: net: stmmac: Fix E2E delay mechanism When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong Signed-off-by: Kurt Kanzenbach Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index eb3b7bf771d7..3d67d1fa3690 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -736,7 +736,7 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; snap_type_sel = PTP_TCR_SNAPTYPSEL_1; - if (priv->synopsys_id != DWMAC_CORE_5_10) + if (priv->synopsys_id < DWMAC_CORE_4_10) ts_event_en = PTP_TCR_TSEVNTENA; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; -- cgit v1.2.3 From 4225fea1cb28370086e17e82c0f69bec2779dca0 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 20 Oct 2021 16:18:34 +0800 Subject: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). Reported-by: Hulk Robot Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index 4dfc52e06704..7fd02aabd79a 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -283,15 +283,22 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, /* Create a posix clock and link it to the device. */ err = posix_clock_register(&ptp->clock, &ptp->dev); if (err) { + if (ptp->pps_source) + pps_unregister_source(ptp->pps_source); + + kfree(ptp->vclock_index); + + if (ptp->kworker) + kthread_destroy_worker(ptp->kworker); + + put_device(&ptp->dev); + pr_err("failed to create posix clock\n"); - goto no_clock; + return ERR_PTR(err); } return ptp; -no_clock: - if (ptp->pps_source) - pps_unregister_source(ptp->pps_source); no_pps: ptp_cleanup_pin_groups(ptp); no_pin_groups: -- cgit v1.2.3 From 5ebcbe342b1c12fae44b4f83cbeae1520e09857e Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 16 Oct 2021 12:17:30 -0500 Subject: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring Setting cred->ucounts in cred_alloc_blank does not make sense. The uid and user_ns are deliberately not set in cred_alloc_blank but instead the setting is delayed until key_change_session_keyring. So move dealing with ucounts into key_change_session_keyring as well. Unfortunately that movement of get_ucounts adds a new failure mode to key_change_session_keyring. I do not see anything stopping the parent process from calling setuid and changing the relevant part of it's cred while keyctl_session_to_parent is running making it fundamentally necessary to call get_ucounts in key_change_session_keyring. Which means that the new failure mode cannot be avoided. A failure of key_change_session_keyring results in a single threaded parent keeping it's existing credentials. Which results in the parent process not being able to access the session keyring and whichever keys are in the new keyring. Further get_ucounts is only expected to fail if the number of bits in the refernece count for the structure is too few. Since the code has no other way to report the failure of get_ucounts and because such failures are not expected to be common add a WARN_ONCE to report this problem to userspace. Between the WARN_ONCE and the parent process not having access to the keys in the new session keyring I expect any failure of get_ucounts will be noticed and reported and we can find another way to handle this condition. (Possibly by just making ucounts->count an atomic_long_t). Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao Reviewed-by: Alexey Gladkov Signed-off-by: "Eric W. Biederman" --- kernel/cred.c | 2 -- security/keys/process_keys.c | 8 ++++++++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/cred.c b/kernel/cred.c index 16c05dfbec4d..1ae0b4948a5a 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -225,8 +225,6 @@ struct cred *cred_alloc_blank(void) #ifdef CONFIG_DEBUG_CREDENTIALS new->magic = CRED_MAGIC; #endif - new->ucounts = get_ucounts(&init_ucounts); - if (security_cred_alloc_blank(new, GFP_KERNEL_ACCOUNT) < 0) goto error; diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index e3d79a7b6db6..b5d5333ab330 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -918,6 +918,13 @@ void key_change_session_keyring(struct callback_head *twork) return; } + /* If get_ucounts fails more bits are needed in the refcount */ + if (unlikely(!get_ucounts(old->ucounts))) { + WARN_ONCE(1, "In %s get_ucounts failed\n", __func__); + put_cred(new); + return; + } + new-> uid = old-> uid; new-> euid = old-> euid; new-> suid = old-> suid; @@ -927,6 +934,7 @@ void key_change_session_keyring(struct callback_head *twork) new-> sgid = old-> sgid; new->fsgid = old->fsgid; new->user = get_uid(old->user); + new->ucounts = old->ucounts; new->user_ns = get_user_ns(old->user_ns); new->group_info = get_group_info(old->group_info); -- cgit v1.2.3 From 280db5d420090a24e4e41f9ddcbf37920a598572 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Wed, 22 Sep 2021 09:54:49 +0300 Subject: e1000e: Separate TGP board type from SPT We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng Signed-off-by: Sasha Neftin Reviewed-by: Paul Menzel Tested-by: Mark Pearson Tested-by: Nechama Kraus Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/e1000.h | 4 ++- drivers/net/ethernet/intel/e1000e/ich8lan.c | 20 +++++++++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 45 +++++++++++++++-------------- 3 files changed, 46 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 5b2143f4b1f8..3178efd98006 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -113,7 +113,8 @@ enum e1000_boards { board_pch2lan, board_pch_lpt, board_pch_spt, - board_pch_cnp + board_pch_cnp, + board_pch_tgp }; struct e1000_ps_page { @@ -499,6 +500,7 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_pch_spt_info; extern const struct e1000_info e1000_pch_cnp_info; +extern const struct e1000_info e1000_pch_tgp_info; extern const struct e1000_info e1000_es2_info; void e1000e_ptp_init(struct e1000_adapter *adapter); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 60c582a16821..66d7196310e2 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -5992,3 +5992,23 @@ const struct e1000_info e1000_pch_cnp_info = { .phy_ops = &ich8_phy_ops, .nvm_ops = &spt_nvm_ops, }; + +const struct e1000_info e1000_pch_tgp_info = { + .mac = e1000_pch_tgp, + .flags = FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_FLASH + | FLAG_HAS_JUMBO_FRAMES + | FLAG_APME_IN_WUC, + .flags2 = FLAG2_HAS_PHY_STATS + | FLAG2_HAS_EEE, + .pba = 26, + .max_hw_frame_size = 9022, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &spt_nvm_ops, +}; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 900b3ab998bd..ebcb2a30add0 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -51,6 +51,7 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_pch_lpt] = &e1000_pch_lpt_info, [board_pch_spt] = &e1000_pch_spt_info, [board_pch_cnp] = &e1000_pch_cnp_info, + [board_pch_tgp] = &e1000_pch_tgp_info, }; struct e1000_reg_info { @@ -7896,28 +7897,28 @@ static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V11), board_pch_cnp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM12), board_pch_spt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V12), board_pch_spt }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM23), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V23), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_cnp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_cnp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM23), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V23), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_tgp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_tgp }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; -- cgit v1.2.3 From e139a1ec92f8dbaaa7380d7e7ea17e148d473d06 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Tue, 19 Oct 2021 23:43:46 +0100 Subject: io_uring: apply max_workers limit to all future users Currently, IORING_REGISTER_IOWQ_MAX_WORKERS applies only to the task that issued it, it's unexpected for users. If one task creates a ring, limits workers and then passes it to another task the limit won't be applied to the other task. Another pitfall is that a task should either create a ring or submit at least one request for IORING_REGISTER_IOWQ_MAX_WORKERS to work at all, furher complicating the picture. Change the API, save the limits and apply to all future users. Note, it should be done first before giving away the ring or submitting new requests otherwise the result is not guaranteed. Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers") Link: https://github.com/axboe/liburing/issues/460 Reported-by: Beld Zhang Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/51d0bae97180e08ab722c0d5c93e7439cfb6f697.1634683237.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index e68d27829bb2..e8b71f14ac8b 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -456,6 +456,8 @@ struct io_ring_ctx { struct work_struct exit_work; struct list_head tctx_list; struct completion ref_comp; + u32 iowq_limits[2]; + bool iowq_limits_set; }; }; @@ -9638,7 +9640,16 @@ static int __io_uring_add_tctx_node(struct io_ring_ctx *ctx) ret = io_uring_alloc_task_context(current, ctx); if (unlikely(ret)) return ret; + tctx = current->io_uring; + if (ctx->iowq_limits_set) { + unsigned int limits[2] = { ctx->iowq_limits[0], + ctx->iowq_limits[1], }; + + ret = io_wq_max_workers(tctx->io_wq, limits); + if (ret) + return ret; + } } if (!xa_load(&tctx->xa, (unsigned long)ctx)) { node = kmalloc(sizeof(*node), GFP_KERNEL); @@ -10674,13 +10685,19 @@ static int io_register_iowq_max_workers(struct io_ring_ctx *ctx, tctx = current->io_uring; } - ret = -EINVAL; - if (!tctx || !tctx->io_wq) - goto err; + BUILD_BUG_ON(sizeof(new_count) != sizeof(ctx->iowq_limits)); - ret = io_wq_max_workers(tctx->io_wq, new_count); - if (ret) - goto err; + memcpy(ctx->iowq_limits, new_count, sizeof(new_count)); + ctx->iowq_limits_set = true; + + ret = -EINVAL; + if (tctx && tctx->io_wq) { + ret = io_wq_max_workers(tctx->io_wq, new_count); + if (ret) + goto err; + } else { + memset(new_count, 0, sizeof(new_count)); + } if (sqd) { mutex_unlock(&sqd->lock); -- cgit v1.2.3 From 4ea672ab694c23886b52e97cee10dea056e43e62 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Wed, 20 Oct 2021 09:53:02 +0100 Subject: io_uring: fix ltimeout unprep io_unprep_linked_timeout() is broken, first it needs to return back REQ_F_ARM_LTIMEOUT, so the linked timeout is enqueued and disarmed. But now we refcounted it, and linked timeouts may get not executed at all, leaking a request. Just kill the unprep optimisation. Fixes: 906c6caaf586 ("io_uring: optimise io_prep_linked_timeout()") Reported-by: Beld Zhang Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/51b8e2bfc4bea8ee625cf2ba62b2a350cc9be031.1634719585.git.asml.silence@gmail.com Link: https://github.com/axboe/liburing/issues/460 Reported-by: Beld Zhang Signed-off-by: Jens Axboe --- fs/io_uring.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index e8b71f14ac8b..d5cc103224f1 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1370,11 +1370,6 @@ static void io_req_track_inflight(struct io_kiocb *req) } } -static inline void io_unprep_linked_timeout(struct io_kiocb *req) -{ - req->flags &= ~REQ_F_LINK_TIMEOUT; -} - static struct io_kiocb *__io_prep_linked_timeout(struct io_kiocb *req) { if (WARN_ON_ONCE(!req->link)) @@ -6985,7 +6980,7 @@ issue_sqe: switch (io_arm_poll_handler(req)) { case IO_APOLL_READY: if (linked_timeout) - io_unprep_linked_timeout(req); + io_queue_linked_timeout(linked_timeout); goto issue_sqe; case IO_APOLL_ABORTED: /* -- cgit v1.2.3 From 639e298f432fb058a9496ea16863f53b1ce935fe Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Wed, 22 Sep 2021 09:55:42 +0300 Subject: e1000e: Fix packet loss on Tiger Lake and later Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin Tested-by: Mark Pearson Tested-by: Nechama Kraus Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++++- drivers/net/ethernet/intel/e1000e/ich8lan.h | 3 +++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 66d7196310e2..5e4fc9b4e2ad 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4813,7 +4813,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; - u32 ctrl_ext, txdctl, snoop; + u32 ctrl_ext, txdctl, snoop, fflt_dbg; s32 ret_val; u16 i; @@ -4872,6 +4872,15 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) snoop = (u32)~(PCIE_NO_SNOOP_ALL); e1000e_set_pcie_no_snoop(hw, snoop); + /* Enable workaround for packet loss issue on TGP PCH + * Do not gate DMA clock from the modPHY block + */ + if (mac->type >= e1000_pch_tgp) { + fflt_dbg = er32(FFLT_DBG); + fflt_dbg |= E1000_FFLT_DBG_DONT_GATE_WAKE_DMA_CLK; + ew32(FFLT_DBG, fflt_dbg); + } + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_RO_DIS; ew32(CTRL_EXT, ctrl_ext); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index d6a092e5ee74..2504b11c3169 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -289,6 +289,9 @@ /* Proprietary Latency Tolerance Reporting PCI Capability */ #define E1000_PCI_LTR_CAP_LPT 0xA8 +/* Don't gate wake DMA clock */ +#define E1000_FFLT_DBG_DONT_GATE_WAKE_DMA_CLK 0x1000 + void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); -- cgit v1.2.3 From 79cc8322b6d82747cb63ea464146c0bf5b5a6bc1 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Thu, 9 Sep 2021 20:49:04 +0300 Subject: igc: Update I226_K device ID The device ID for I226_K was incorrectly assigned, update the device ID to the correct one. Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin Tested-by: Nechama Kraus Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_hw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h index 4461f8b9a864..4e0203336c6b 100644 --- a/drivers/net/ethernet/intel/igc/igc_hw.h +++ b/drivers/net/ethernet/intel/igc/igc_hw.h @@ -22,8 +22,8 @@ #define IGC_DEV_ID_I220_V 0x15F7 #define IGC_DEV_ID_I225_K 0x3100 #define IGC_DEV_ID_I225_K2 0x3101 +#define IGC_DEV_ID_I226_K 0x3102 #define IGC_DEV_ID_I225_LMVP 0x5502 -#define IGC_DEV_ID_I226_K 0x5504 #define IGC_DEV_ID_I225_IT 0x0D9F #define IGC_DEV_ID_I226_LM 0x125B #define IGC_DEV_ID_I226_V 0x125C -- cgit v1.2.3 From 7dcf78b870be6418d72bb1c4d4924bf0f5ca5052 Mon Sep 17 00:00:00 2001 From: Tony Nguyen Date: Tue, 19 Oct 2021 13:04:16 -0700 Subject: ice: Add missing E810 device ids As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen Acked-by: Jesse Brandeburg Acked-by: Paul Menzel --- drivers/net/ethernet/intel/ice/ice_common.c | 2 ++ drivers/net/ethernet/intel/ice/ice_devids.h | 4 ++++ drivers/net/ethernet/intel/ice/ice_main.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 2fb81e359cdf..df5ad4de1f00 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -25,6 +25,8 @@ static enum ice_status ice_set_mac_type(struct ice_hw *hw) case ICE_DEV_ID_E810C_BACKPLANE: case ICE_DEV_ID_E810C_QSFP: case ICE_DEV_ID_E810C_SFP: + case ICE_DEV_ID_E810_XXV_BACKPLANE: + case ICE_DEV_ID_E810_XXV_QSFP: case ICE_DEV_ID_E810_XXV_SFP: hw->mac_type = ICE_MAC_E810; break; diff --git a/drivers/net/ethernet/intel/ice/ice_devids.h b/drivers/net/ethernet/intel/ice/ice_devids.h index 9d8194671f6a..ef4392e6e244 100644 --- a/drivers/net/ethernet/intel/ice/ice_devids.h +++ b/drivers/net/ethernet/intel/ice/ice_devids.h @@ -21,6 +21,10 @@ #define ICE_DEV_ID_E810C_QSFP 0x1592 /* Intel(R) Ethernet Controller E810-C for SFP */ #define ICE_DEV_ID_E810C_SFP 0x1593 +/* Intel(R) Ethernet Controller E810-XXV for backplane */ +#define ICE_DEV_ID_E810_XXV_BACKPLANE 0x1599 +/* Intel(R) Ethernet Controller E810-XXV for QSFP */ +#define ICE_DEV_ID_E810_XXV_QSFP 0x159A /* Intel(R) Ethernet Controller E810-XXV for SFP */ #define ICE_DEV_ID_E810_XXV_SFP 0x159B /* Intel(R) Ethernet Connection E823-C for backplane */ diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 94037881bfd8..06fa93e597fb 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -5020,6 +5020,8 @@ static const struct pci_device_id ice_pci_tbl[] = { { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_BACKPLANE), 0 }, { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_QSFP), 0 }, { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_SFP), 0 }, + { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_BACKPLANE), 0 }, + { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_QSFP), 0 }, { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_SFP), 0 }, { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_BACKPLANE), 0 }, { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_QSFP), 0 }, -- cgit v1.2.3 From 14fe2471c62816ba82546fb68369d957c3a58b59 Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Thu, 7 Oct 2021 16:05:38 +0300 Subject: net/mlx5: Lag, change multipath and bonding to be mutually exclusive Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/lag.c | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 13 ++++++++----- drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h | 2 ++ include/linux/mlx5/driver.h | 1 - 6 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index b4e986818794..4a13ef561587 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -10,6 +10,8 @@ #include "en_tc.h" #include "rep/tc.h" #include "rep/neigh.h" +#include "lag.h" +#include "lag_mp.h" struct mlx5e_tc_tun_route_attr { struct net_device *out_dev; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ba8164792016..129ff7e0d65c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -67,6 +67,8 @@ #include "lib/fs_chains.h" #include "diag/en_tc_tracepoint.h" #include +#include "lag.h" +#include "lag_mp.h" #define nic_chains(priv) ((priv)->fs.tc.chains) #define MLX5_MH_ACT_SZ MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c index ca5690b0a7ab..d2105c1635c3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c @@ -442,6 +442,10 @@ static void mlx5_do_bond(struct mlx5_lag *ldev) if (!mlx5_lag_is_ready(ldev)) { do_bond = false; } else { + /* VF LAG is in multipath mode, ignore bond change requests */ + if (mlx5_lag_is_multipath(dev0)) + return; + tracker = ldev->tracker; do_bond = tracker.is_bonded && mlx5_lag_check_prereq(ldev); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c index f239b352a58a..21fdaf708f1f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c @@ -9,20 +9,23 @@ #include "eswitch.h" #include "lib/mlx5.h" +static bool __mlx5_lag_is_multipath(struct mlx5_lag *ldev) +{ + return !!(ldev->flags & MLX5_LAG_FLAG_MULTIPATH); +} + static bool mlx5_lag_multipath_check_prereq(struct mlx5_lag *ldev) { if (!mlx5_lag_is_ready(ldev)) return false; + if (__mlx5_lag_is_active(ldev) && !__mlx5_lag_is_multipath(ldev)) + return false; + return mlx5_esw_multipath_prereq(ldev->pf[MLX5_LAG_P1].dev, ldev->pf[MLX5_LAG_P2].dev); } -static bool __mlx5_lag_is_multipath(struct mlx5_lag *ldev) -{ - return !!(ldev->flags & MLX5_LAG_FLAG_MULTIPATH); -} - bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev) { struct mlx5_lag *ldev; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h index 729c839397a8..dea199e79bed 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h @@ -24,12 +24,14 @@ struct lag_mp { void mlx5_lag_mp_reset(struct mlx5_lag *ldev); int mlx5_lag_mp_init(struct mlx5_lag *ldev); void mlx5_lag_mp_cleanup(struct mlx5_lag *ldev); +bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev); #else /* CONFIG_MLX5_ESWITCH */ static inline void mlx5_lag_mp_reset(struct mlx5_lag *ldev) {}; static inline int mlx5_lag_mp_init(struct mlx5_lag *ldev) { return 0; } static inline void mlx5_lag_mp_cleanup(struct mlx5_lag *ldev) {} +bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev) { return false; } #endif /* CONFIG_MLX5_ESWITCH */ #endif /* __MLX5_LAG_MP_H__ */ diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index e23417424373..f17d2101af7a 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1138,7 +1138,6 @@ int mlx5_cmd_create_vport_lag(struct mlx5_core_dev *dev); int mlx5_cmd_destroy_vport_lag(struct mlx5_core_dev *dev); bool mlx5_lag_is_roce(struct mlx5_core_dev *dev); bool mlx5_lag_is_sriov(struct mlx5_core_dev *dev); -bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev); bool mlx5_lag_is_active(struct mlx5_core_dev *dev); bool mlx5_lag_is_master(struct mlx5_core_dev *dev); bool mlx5_lag_is_shared_fdb(struct mlx5_core_dev *dev); -- cgit v1.2.3 From a6f74333548f56afb413fc928ae1aefc4fe7608f Mon Sep 17 00:00:00 2001 From: Dmytro Linkin Date: Wed, 25 Aug 2021 17:51:26 +0300 Subject: net/mlx5: E-switch, Return correct error code on group creation failure Dan Carpenter report: The patch f47e04eb96e0: "net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups" from May 31, 2021, leads to the following Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c:483 esw_qos_create_rate_group() warn: passing zero to 'ERR_PTR' If min rate normalization failed then error code may be overwritten to 0 if scheduling element destruction succeed. Ignore this value and always return initial one. Fixes: f47e04eb96e0 ("net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups") Reported-by: Dan Carpenter Signed-off-by: Dmytro Linkin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c index 985e305179d1..c6cc67cb4f6a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c @@ -473,10 +473,9 @@ esw_qos_create_rate_group(struct mlx5_eswitch *esw, struct netlink_ext_ack *exta err_min_rate: list_del(&group->list); - err = mlx5_destroy_scheduling_element_cmd(esw->dev, - SCHEDULING_HIERARCHY_E_SWITCH, - group->tsar_ix); - if (err) + if (mlx5_destroy_scheduling_element_cmd(esw->dev, + SCHEDULING_HIERARCHY_E_SWITCH, + group->tsar_ix)) NL_SET_ERR_MSG_MOD(extack, "E-Switch destroy TSAR for group failed"); err_sched_elem: kfree(group); -- cgit v1.2.3 From 68e66e1a69cd94f934522348ab232af49863452a Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Sat, 2 Oct 2021 11:15:35 +0300 Subject: net/mlx5e: Fix vlan data lost during suspend flow During suspend flow the driver calls mlx5e_destroy_vlan_table() which does not only delete the vlans steering flow rules, but also frees the data on currently active vlans, thus it is not restored during resume flow. This fix keeps the vlan data on suspend flow and frees it only on driver remove flow. Fixes: 6783f0a21a3c ("net/mlx5e: Dynamic alloc vlan table for netdev when needed") Signed-off-by: Moshe Shemesh Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/fs.h | 3 +++ drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 28 +++++++++++++---------- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 ++++++ 3 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h b/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h index 41684a6c44e9..a88a1a48229f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h @@ -199,6 +199,9 @@ void mlx5e_disable_cvlan_filter(struct mlx5e_priv *priv); int mlx5e_create_flow_steering(struct mlx5e_priv *priv); void mlx5e_destroy_flow_steering(struct mlx5e_priv *priv); +int mlx5e_fs_init(struct mlx5e_priv *priv); +void mlx5e_fs_cleanup(struct mlx5e_priv *priv); + int mlx5e_add_vlan_trap(struct mlx5e_priv *priv, int trap_id, int tir_num); void mlx5e_remove_vlan_trap(struct mlx5e_priv *priv); int mlx5e_add_mac_trap(struct mlx5e_priv *priv, int trap_id, int tir_num); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c index c06b4b938ae7..d226cc5ab1d1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c @@ -1186,10 +1186,6 @@ static int mlx5e_create_vlan_table(struct mlx5e_priv *priv) struct mlx5e_flow_table *ft; int err; - priv->fs.vlan = kvzalloc(sizeof(*priv->fs.vlan), GFP_KERNEL); - if (!priv->fs.vlan) - return -ENOMEM; - ft = &priv->fs.vlan->ft; ft->num_groups = 0; @@ -1198,10 +1194,8 @@ static int mlx5e_create_vlan_table(struct mlx5e_priv *priv) ft_attr.prio = MLX5E_NIC_PRIO; ft->t = mlx5_create_flow_table(priv->fs.ns, &ft_attr); - if (IS_ERR(ft->t)) { - err = PTR_ERR(ft->t); - goto err_free_t; - } + if (IS_ERR(ft->t)) + return PTR_ERR(ft->t); ft->g = kcalloc(MLX5E_NUM_VLAN_GROUPS, sizeof(*ft->g), GFP_KERNEL); if (!ft->g) { @@ -1221,9 +1215,6 @@ err_free_g: kfree(ft->g); err_destroy_vlan_table: mlx5_destroy_flow_table(ft->t); -err_free_t: - kvfree(priv->fs.vlan); - priv->fs.vlan = NULL; return err; } @@ -1232,7 +1223,6 @@ static void mlx5e_destroy_vlan_table(struct mlx5e_priv *priv) { mlx5e_del_vlan_rules(priv); mlx5e_destroy_flow_table(&priv->fs.vlan->ft); - kvfree(priv->fs.vlan); } static void mlx5e_destroy_inner_ttc_table(struct mlx5e_priv *priv) @@ -1351,3 +1341,17 @@ void mlx5e_destroy_flow_steering(struct mlx5e_priv *priv) mlx5e_arfs_destroy_tables(priv); mlx5e_ethtool_cleanup_steering(priv); } + +int mlx5e_fs_init(struct mlx5e_priv *priv) +{ + priv->fs.vlan = kvzalloc(sizeof(*priv->fs.vlan), GFP_KERNEL); + if (!priv->fs.vlan) + return -ENOMEM; + return 0; +} + +void mlx5e_fs_cleanup(struct mlx5e_priv *priv) +{ + kvfree(priv->fs.vlan); + priv->fs.vlan = NULL; +} diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 09c8b71b186c..41ef6eb70a58 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4578,6 +4578,12 @@ static int mlx5e_nic_init(struct mlx5_core_dev *mdev, mlx5e_timestamp_init(priv); + err = mlx5e_fs_init(priv); + if (err) { + mlx5_core_err(mdev, "FS initialization failed, %d\n", err); + return err; + } + err = mlx5e_ipsec_init(priv); if (err) mlx5_core_err(mdev, "IPSec initialization failed, %d\n", err); @@ -4595,6 +4601,7 @@ static void mlx5e_nic_cleanup(struct mlx5e_priv *priv) mlx5e_health_destroy_reporters(priv); mlx5e_tls_cleanup(priv); mlx5e_ipsec_cleanup(priv); + mlx5e_fs_cleanup(priv); } static int mlx5e_init_nic_rx(struct mlx5e_priv *priv) -- cgit v1.2.3 From d10457f85d4ae4d32c0df0cd65358a78c577fbe6 Mon Sep 17 00:00:00 2001 From: Emeel Hakim Date: Mon, 18 Oct 2021 15:30:09 +0300 Subject: net/mlx5e: IPsec: Fix a misuse of the software parser's fields IPsec crypto offload current Software Parser (SWP) fields settings in the ethernet segment (eseg) are not aligned with PRM/HW expectations. Among others in case of IP|ESP|TCP packet, current driver sets the offsets for inner_l3 and inner_l4 although there is no inner l3/l4 headers relative to ESP header in such packets. SWP provides the offsets for HW ,so it can be used to find csum fields to offload the checksum, however these are not necessarily used by HW and are used as fallback in case HW fails to parse the packet, e.g when performing IPSec Transport Aware (IP | ESP | TCP) there is no need to add SW parse on inner packet. So in some cases packets csum was calculated correctly , whereas in other cases it failed. The later faced csum errors (caused by wrong packet length calculations) which led to lots of packet drops hence the low throughput. Fix by setting the SWP fields as expected in a IP|ESP|TCP packet. the following describe the expected SWP offsets: * Tunnel Mode: * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP IP L4 * * Transport Mode: * SWP: OutL3 OutL4 * Pkt: MAC IP ESP L4 * * Tunnel(VXLAN TCP/UDP) over Transport Mode * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP UDP VXLAN IP L4 Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim Reviewed-by: Raed Salem Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/en_accel/ipsec_rxtx.c | 51 ++++++++++++---------- 1 file changed, 27 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c index 33de8f0092a6..fb5397324aa4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c @@ -141,8 +141,7 @@ static void mlx5e_ipsec_set_swp(struct sk_buff *skb, * Pkt: MAC IP ESP IP L4 * * Transport Mode: - * SWP: OutL3 InL4 - * InL3 + * SWP: OutL3 OutL4 * Pkt: MAC IP ESP L4 * * Tunnel(VXLAN TCP/UDP) over Transport Mode @@ -171,31 +170,35 @@ static void mlx5e_ipsec_set_swp(struct sk_buff *skb, return; if (!xo->inner_ipproto) { - eseg->swp_inner_l3_offset = skb_network_offset(skb) / 2; - eseg->swp_inner_l4_offset = skb_inner_transport_offset(skb) / 2; - if (skb->protocol == htons(ETH_P_IPV6)) - eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L3_IPV6; - if (xo->proto == IPPROTO_UDP) + switch (xo->proto) { + case IPPROTO_UDP: + eseg->swp_flags |= MLX5_ETH_WQE_SWP_OUTER_L4_UDP; + fallthrough; + case IPPROTO_TCP: + /* IP | ESP | TCP */ + eseg->swp_outer_l4_offset = skb_inner_transport_offset(skb) / 2; + break; + default: + break; + } + } else { + /* Tunnel(VXLAN TCP/UDP) over Transport Mode */ + switch (xo->inner_ipproto) { + case IPPROTO_UDP: eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L4_UDP; - return; - } - - /* Tunnel(VXLAN TCP/UDP) over Transport Mode */ - switch (xo->inner_ipproto) { - case IPPROTO_UDP: - eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L4_UDP; - fallthrough; - case IPPROTO_TCP: - eseg->swp_inner_l3_offset = skb_inner_network_offset(skb) / 2; - eseg->swp_inner_l4_offset = (skb->csum_start + skb->head - skb->data) / 2; - if (skb->protocol == htons(ETH_P_IPV6)) - eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L3_IPV6; - break; - default: - break; + fallthrough; + case IPPROTO_TCP: + eseg->swp_inner_l3_offset = skb_inner_network_offset(skb) / 2; + eseg->swp_inner_l4_offset = + (skb->csum_start + skb->head - skb->data) / 2; + if (skb->protocol == htons(ETH_P_IPV6)) + eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L3_IPV6; + break; + default: + break; + } } - return; } void mlx5e_ipsec_set_iv_esn(struct sk_buff *skb, struct xfrm_state *x, -- cgit v1.2.3 From 1d000323940137332d4d62c6332b6daf5f07aba7 Mon Sep 17 00:00:00 2001 From: Emeel Hakim Date: Mon, 18 Oct 2021 15:31:19 +0300 Subject: net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags Current Work Queue Entry (WQE) checksum (csum) flags in the ethernet segment (eseg) in case of IPsec crypto offload datapath are not aligned with PRM/HW expectations. Currently the driver always sets the l3_inner_csum flag in case of IPsec because of the wrong usage of skb->encapsulation as indicator for inner IPsec header since skb->encapsulation is always ON for IPsec packets since IPsec itself is an encapsulation protocol. The above forced a failing attempts of calculating csum of non-existing segments (like in the IP|ESP|TCP packet case which does not have an l3_inner) which led to lots of packet drops hence the low throughput. Fix by using xo->inner_ipproto as indicator for inner IPsec header instead of skb->encapsulation in addition to setting the csum flags as following: * Tunnel Mode: * Pkt: MAC IP ESP IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs * * Transport Mode: * Pkt: MAC IP ESP L4 * CSUM: l3_cs [ | l4_cs (checksum partial case)] * * Tunnel(VXLAN TCP/UDP) over Transport Mode * Pkt: MAC IP ESP UDP VXLAN IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index c63d78eda606..188994d091c5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -213,19 +213,18 @@ static inline void mlx5e_insert_vlan(void *start, struct sk_buff *skb, u16 ihs) memcpy(&vhdr->h_vlan_encapsulated_proto, skb->data + cpy1_sz, cpy2_sz); } -/* If packet is not IP's CHECKSUM_PARTIAL (e.g. icmd packet), - * need to set L3 checksum flag for IPsec - */ static void ipsec_txwqe_build_eseg_csum(struct mlx5e_txqsq *sq, struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg) { + struct xfrm_offload *xo = xfrm_offload(skb); + eseg->cs_flags = MLX5_ETH_WQE_L3_CSUM; - if (skb->encapsulation) { - eseg->cs_flags |= MLX5_ETH_WQE_L3_INNER_CSUM; + if (xo->inner_ipproto) { + eseg->cs_flags |= MLX5_ETH_WQE_L4_INNER_CSUM | MLX5_ETH_WQE_L3_INNER_CSUM; + } else if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + eseg->cs_flags |= MLX5_ETH_WQE_L4_CSUM; sq->stats->csum_partial_inner++; - } else { - sq->stats->csum_partial++; } } @@ -234,6 +233,11 @@ mlx5e_txwqe_build_eseg_csum(struct mlx5e_txqsq *sq, struct sk_buff *skb, struct mlx5e_accel_tx_state *accel, struct mlx5_wqe_eth_seg *eseg) { + if (unlikely(mlx5e_ipsec_eseg_meta(eseg))) { + ipsec_txwqe_build_eseg_csum(sq, skb, eseg); + return; + } + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { eseg->cs_flags = MLX5_ETH_WQE_L3_CSUM; if (skb->encapsulation) { @@ -249,8 +253,6 @@ mlx5e_txwqe_build_eseg_csum(struct mlx5e_txqsq *sq, struct sk_buff *skb, eseg->cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM; sq->stats->csum_partial++; #endif - } else if (unlikely(mlx5e_ipsec_eseg_meta(eseg))) { - ipsec_txwqe_build_eseg_csum(sq, skb, eseg); } else sq->stats->csum_none++; } -- cgit v1.2.3 From 25f54d08f12feb593e62cc2193fedefaf7825301 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Thu, 23 Sep 2021 15:13:39 +0800 Subject: autofs: fix wait name hash calculation in autofs_wait() There's a mistake in commit 2be7828c9fefc ("get rid of autofs_getpath()") that affects kernels from v5.13.0, basically missed because of me not fully testing the change for Al. The problem is that the hash calculation for the wait name qstr hasn't been updated to account for the change to use dentry_path_raw(). This prevents the correct matching an existing wait resulting in multiple notifications being sent to the daemon for the same mount which must not occur. The problem wasn't discovered earlier because it only occurs when multiple processes trigger a request for the same mount concurrently so it only shows up in more aggressive testing. Fixes: 2be7828c9fefc ("get rid of autofs_getpath()") Cc: stable@vger.kernel.org Signed-off-by: Ian Kent Signed-off-by: Al Viro --- fs/autofs/waitq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/autofs/waitq.c b/fs/autofs/waitq.c index 16b5fca0626e..54c1f8b8b075 100644 --- a/fs/autofs/waitq.c +++ b/fs/autofs/waitq.c @@ -358,7 +358,7 @@ int autofs_wait(struct autofs_sb_info *sbi, qstr.len = strlen(p); offset = p - name; } - qstr.hash = full_name_hash(dentry, name, qstr.len); + qstr.hash = full_name_hash(dentry, qstr.name, qstr.len); if (mutex_lock_interruptible(&sbi->wq_mutex)) { kfree(name); -- cgit v1.2.3 From de7cd3f6761f49bef044ec49493d88737a70f1a6 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 20 Oct 2021 06:27:36 -0400 Subject: KVM: x86: check for interrupts before deciding whether to exit the fast path The kvm_x86_sync_pir_to_irr callback can sometimes set KVM_REQ_EVENT. If that happens exactly at the time that an exit is handled as EXIT_FASTPATH_REENTER_GUEST, vcpu_enter_guest will go incorrectly through the loop that calls kvm_x86_run, instead of processing the request promptly. Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 0c8b5129effd..381384a54790 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9643,14 +9643,14 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) if (likely(exit_fastpath != EXIT_FASTPATH_REENTER_GUEST)) break; - if (unlikely(kvm_vcpu_exit_request(vcpu))) { + if (vcpu->arch.apicv_active) + static_call(kvm_x86_sync_pir_to_irr)(vcpu); + + if (unlikely(kvm_vcpu_exit_request(vcpu))) { exit_fastpath = EXIT_FASTPATH_EXIT_HANDLED; break; } - - if (vcpu->arch.apicv_active) - static_call(kvm_x86_sync_pir_to_irr)(vcpu); - } + } /* * Do this here before restoring debug registers on the host. And -- cgit v1.2.3 From 3a25dfa67fe40f3a2690af2c562e0947a78bd6a0 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 20 Oct 2021 06:22:59 -0400 Subject: KVM: nVMX: promptly process interrupts delivered while in guest mode Since commit c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") there is no longer the certainty that check_nested_events() tries to inject an external interrupt vmexit to L1 on every call to vcpu_enter_guest. Therefore, even in that case we need to set KVM_REQ_EVENT. This ensures that inject_pending_event() is called, and from there kvm_check_nested_events(). Fixes: c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx/vmx.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 7fb2a3a1ca46..7d595effb66f 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6305,18 +6305,13 @@ static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu) /* * If we are running L2 and L1 has a new pending interrupt - * which can be injected, we should re-evaluate - * what should be done with this new L1 interrupt. - * If L1 intercepts external-interrupts, we should - * exit from L2 to L1. Otherwise, interrupt should be - * delivered directly to L2. + * which can be injected, this may cause a vmexit or it may + * be injected into L2. Either way, this interrupt will be + * processed via KVM_REQ_EVENT, not RVI, because we do not use + * virtual interrupt delivery to inject L1 interrupts into L2. */ - if (is_guest_mode(vcpu) && max_irr_updated) { - if (nested_exit_on_intr(vcpu)) - kvm_vcpu_exiting_guest_mode(vcpu); - else - kvm_make_request(KVM_REQ_EVENT, vcpu); - } + if (is_guest_mode(vcpu) && max_irr_updated) + kvm_make_request(KVM_REQ_EVENT, vcpu); } else { max_irr = kvm_lapic_find_highest_irr(vcpu); } -- cgit v1.2.3 From d534d31d6a45d71de61db22090b4820afb68fddc Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 21 Oct 2021 10:01:38 +0200 Subject: fuse: check s_root when destroying sb Checking "fm" works because currently sb->s_fs_info is cleared on error paths; however, sb->s_root is what generic_shutdown_super() checks to determine whether the sb was fully initialized or not. This change will allow cleanup of sb setup error paths. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 2 +- fs/fuse/virtio_fs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 36cd03114b6d..60ceaf332840 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1747,7 +1747,7 @@ static void fuse_sb_destroy(struct super_block *sb) struct fuse_mount *fm = get_fuse_mount_super(sb); bool last; - if (fm) { + if (sb->s_root) { last = fuse_mount_remove(fm); if (last) fuse_conn_destroy(fm); diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index 0ad89c6629d7..32fd138c621e 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -1394,7 +1394,7 @@ static void virtio_kill_sb(struct super_block *sb) bool last; /* If mount failed, we can still be called without any fc */ - if (fm) { + if (sb->s_root) { last = fuse_mount_remove(fm); if (last) virtio_fs_conn_destroy(fm); -- cgit v1.2.3 From a27c061a49afd7ad2d935e6ac734e2a9f62861b8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 21 Oct 2021 10:01:38 +0200 Subject: fuse: get rid of fuse_put_super() The ->put_super callback is called from generic_shutdown_super() in case of a fully initialized sb. This is called from kill_***_super(), which is called from ->kill_sb instances. Fuse uses ->put_super to destroy the fs specific fuse_mount and drop the reference to the fuse_conn, while it does the same on each error case during sb setup. This patch moves the destruction from fuse_put_super() to fuse_mount_destroy(), called at the end of all ->kill_sb instances. A follup patch will clean up the error paths. Signed-off-by: Miklos Szeredi --- fs/fuse/fuse_i.h | 3 +++ fs/fuse/inode.c | 20 +++++++++++--------- fs/fuse/virtio_fs.c | 1 + 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 319596df5dc6..f55f9f94b1a4 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -1121,6 +1121,9 @@ int fuse_init_fs_context_submount(struct fs_context *fsc); */ void fuse_conn_destroy(struct fuse_mount *fm); +/* Drop the connection and free the fuse mount */ +void fuse_mount_destroy(struct fuse_mount *fm); + /** * Add connection to control filesystem */ diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 60ceaf332840..30ca1f71d777 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -457,14 +457,6 @@ static void fuse_send_destroy(struct fuse_mount *fm) } } -static void fuse_put_super(struct super_block *sb) -{ - struct fuse_mount *fm = get_fuse_mount_super(sb); - - fuse_conn_put(fm->fc); - kfree(fm); -} - static void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatfs *attr) { stbuf->f_type = FUSE_SUPER_MAGIC; @@ -1003,7 +995,6 @@ static const struct super_operations fuse_super_operations = { .evict_inode = fuse_evict_inode, .write_inode = fuse_write_inode, .drop_inode = generic_delete_inode, - .put_super = fuse_put_super, .umount_begin = fuse_umount_begin, .statfs = fuse_statfs, .sync_fs = fuse_sync_fs, @@ -1754,10 +1745,20 @@ static void fuse_sb_destroy(struct super_block *sb) } } +void fuse_mount_destroy(struct fuse_mount *fm) +{ + if (fm) { + fuse_conn_put(fm->fc); + kfree(fm); + } +} +EXPORT_SYMBOL(fuse_mount_destroy); + static void fuse_kill_sb_anon(struct super_block *sb) { fuse_sb_destroy(sb); kill_anon_super(sb); + fuse_mount_destroy(get_fuse_mount_super(sb)); } static struct file_system_type fuse_fs_type = { @@ -1775,6 +1776,7 @@ static void fuse_kill_sb_blk(struct super_block *sb) { fuse_sb_destroy(sb); kill_block_super(sb); + fuse_mount_destroy(get_fuse_mount_super(sb)); } static struct file_system_type fuseblk_fs_type = { diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index 32fd138c621e..fa80d250c802 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -1400,6 +1400,7 @@ static void virtio_kill_sb(struct super_block *sb) virtio_fs_conn_destroy(fm); } kill_anon_super(sb); + fuse_mount_destroy(fm); } static int virtio_fs_test_super(struct super_block *sb, -- cgit v1.2.3 From c191cd07ee948c93081d8e4cba43d23b18b2f3da Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 21 Oct 2021 10:01:39 +0200 Subject: fuse: clean up fuse_mount destruction 1. call fuse_mount_destroy() for open coded variants 2. before deactivate_locked_super() don't need fuse_mount destruction since that will now be done (if ->s_fs_info is not cleared) 3. rearrange fuse_mount setup in fuse_get_tree_submount() so that the regular pattern can be used Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 17 +++++------------ fs/fuse/virtio_fs.c | 9 ++------- 2 files changed, 7 insertions(+), 19 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 30ca1f71d777..308daee54c12 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1415,20 +1415,17 @@ static int fuse_get_tree_submount(struct fs_context *fsc) if (!fm) return -ENOMEM; + fm->fc = fuse_conn_get(fc); fsc->s_fs_info = fm; sb = sget_fc(fsc, NULL, set_anon_super_fc); - if (IS_ERR(sb)) { - kfree(fm); + if (fsc->s_fs_info) + fuse_mount_destroy(fm); + if (IS_ERR(sb)) return PTR_ERR(sb); - } - fm->fc = fuse_conn_get(fc); /* Initialize superblock, making @mp_fi its root */ err = fuse_fill_super_submount(sb, mp_fi); if (err) { - fuse_conn_put(fc); - kfree(fm); - sb->s_fs_info = NULL; deactivate_locked_super(sb); return err; } @@ -1595,16 +1592,12 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc) err = fuse_fill_super_common(sb, ctx); if (err) - goto err_put_conn; + goto err; /* file->private_data shall be visible on all CPUs after this */ smp_mb(); fuse_send_init(get_fuse_mount_super(sb)); return 0; - err_put_conn: - fuse_conn_put(fc); - kfree(fm); - sb->s_fs_info = NULL; err: return err; } diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index fa80d250c802..94fc874f5de7 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -1456,19 +1456,14 @@ static int virtio_fs_get_tree(struct fs_context *fsc) fsc->s_fs_info = fm; sb = sget_fc(fsc, virtio_fs_test_super, set_anon_super_fc); - if (fsc->s_fs_info) { - fuse_conn_put(fc); - kfree(fm); - } + if (fsc->s_fs_info) + fuse_mount_destroy(fm); if (IS_ERR(sb)) return PTR_ERR(sb); if (!sb->s_root) { err = virtio_fs_fill_super(sb, fsc); if (err) { - fuse_conn_put(fc); - kfree(fm); - sb->s_fs_info = NULL; deactivate_locked_super(sb); return err; } -- cgit v1.2.3 From 80019f1138324b6f35ae728b4f25eeb08899b452 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 21 Oct 2021 10:01:39 +0200 Subject: fuse: always initialize sb->s_fs_info Syzkaller reports a null pointer dereference in fuse_test_super() that is caused by sb->s_fs_info being NULL. This is due to the fact that fuse_fill_super() is initializing s_fs_info, which is too late, it's already on the fs_supers list. The initialization needs to be done in sget_fc() with the sb_lock held. Move allocation of fuse_mount and fuse_conn from fuse_fill_super() into fuse_get_tree(). After this ->kill_sb() will always be called with non-NULL ->s_fs_info, hence fuse_mount_destroy() can drop the test for non-NULL "fm". Reported-by: syzbot+74a15f02ccb51f398601@syzkaller.appspotmail.com Fixes: 5d5b74aa9c76 ("fuse: allow sharing existing sb") Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 50 +++++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 308daee54c12..b468f55634f2 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1557,8 +1557,6 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc) { struct fuse_fs_context *ctx = fsc->fs_private; int err; - struct fuse_conn *fc; - struct fuse_mount *fm; if (!ctx->file || !ctx->rootmode_present || !ctx->user_id_present || !ctx->group_id_present) @@ -1574,22 +1572,6 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc) goto err; ctx->fudptr = &ctx->file->private_data; - fc = kmalloc(sizeof(*fc), GFP_KERNEL); - err = -ENOMEM; - if (!fc) - goto err; - - fm = kzalloc(sizeof(*fm), GFP_KERNEL); - if (!fm) { - kfree(fc); - goto err; - } - - fuse_conn_init(fc, fm, sb->s_user_ns, &fuse_dev_fiq_ops, NULL); - fc->release = fuse_free_conn; - - sb->s_fs_info = fm; - err = fuse_fill_super_common(sb, ctx); if (err) goto err; @@ -1621,22 +1603,40 @@ static int fuse_get_tree(struct fs_context *fsc) { struct fuse_fs_context *ctx = fsc->fs_private; struct fuse_dev *fud; + struct fuse_conn *fc; + struct fuse_mount *fm; struct super_block *sb; int err; + fc = kmalloc(sizeof(*fc), GFP_KERNEL); + if (!fc) + return -ENOMEM; + + fm = kzalloc(sizeof(*fm), GFP_KERNEL); + if (!fm) { + kfree(fc); + return -ENOMEM; + } + + fuse_conn_init(fc, fm, fsc->user_ns, &fuse_dev_fiq_ops, NULL); + fc->release = fuse_free_conn; + + fsc->s_fs_info = fm; + if (ctx->fd_present) ctx->file = fget(ctx->fd); if (IS_ENABLED(CONFIG_BLOCK) && ctx->is_bdev) { err = get_tree_bdev(fsc, fuse_fill_super); - goto out_fput; + goto out; } /* * While block dev mount can be initialized with a dummy device fd * (found by device name), normal fuse mounts can't */ + err = -EINVAL; if (!ctx->file) - return -EINVAL; + goto out; /* * Allow creating a fuse mount with an already initialized fuse @@ -1652,7 +1652,9 @@ static int fuse_get_tree(struct fs_context *fsc) } else { err = get_tree_nodev(fsc, fuse_fill_super); } -out_fput: +out: + if (fsc->s_fs_info) + fuse_mount_destroy(fm); if (ctx->file) fput(ctx->file); return err; @@ -1740,10 +1742,8 @@ static void fuse_sb_destroy(struct super_block *sb) void fuse_mount_destroy(struct fuse_mount *fm) { - if (fm) { - fuse_conn_put(fm->fc); - kfree(fm); - } + fuse_conn_put(fm->fc); + kfree(fm); } EXPORT_SYMBOL(fuse_mount_destroy); -- cgit v1.2.3 From 964d32e512670c7b87870e30cfed2303da86d614 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 21 Oct 2021 10:01:39 +0200 Subject: fuse: clean up error exits in fuse_fill_super() Instead of "goto err", return error directly, since there's no error cleanup to do now. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index b468f55634f2..12d49a1914e8 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1566,22 +1566,18 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc) * Require mount to happen from the same user namespace which * opened /dev/fuse to prevent potential attacks. */ - err = -EINVAL; if ((ctx->file->f_op != &fuse_dev_operations) || (ctx->file->f_cred->user_ns != sb->s_user_ns)) - goto err; + return -EINVAL; ctx->fudptr = &ctx->file->private_data; err = fuse_fill_super_common(sb, ctx); if (err) - goto err; + return err; /* file->private_data shall be visible on all CPUs after this */ smp_mb(); fuse_send_init(get_fuse_mount_super(sb)); return 0; - - err: - return err; } /* -- cgit v1.2.3 From 3cfc183052c3dbf8eae57b6c1685dab00ed3db4a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 16 Oct 2021 23:04:46 +0200 Subject: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut Cc: Daniel Abrecht Cc: Emil Velikov Cc: Laurent Pinchart Cc: Sam Ravnborg Cc: Stefan Agner Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/mxsfb/mxsfb_drv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c index ec0432fe1bdf..86d78634a979 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c @@ -173,7 +173,11 @@ static void mxsfb_irq_disable(struct drm_device *drm) struct mxsfb_drm_private *mxsfb = drm->dev_private; mxsfb_enable_axi_clk(mxsfb); - mxsfb->crtc.funcs->disable_vblank(&mxsfb->crtc); + + /* Disable and clear VBLANK IRQ */ + writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_CLR); + writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR); + mxsfb_disable_axi_clk(mxsfb); } -- cgit v1.2.3 From 772970620a839141835eaf2bc507d957b10adcca Mon Sep 17 00:00:00 2001 From: Dan Johansen Date: Wed, 18 Aug 2021 23:48:18 +0200 Subject: drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard Signed-off-by: Dan Johansen Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c index 0145129d7c66..534dd7414d42 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c @@ -590,14 +590,14 @@ static const struct drm_display_mode k101_im2byl02_default_mode = { .clock = 69700, .hdisplay = 800, - .hsync_start = 800 + 6, - .hsync_end = 800 + 6 + 15, - .htotal = 800 + 6 + 15 + 16, + .hsync_start = 800 + 52, + .hsync_end = 800 + 52 + 8, + .htotal = 800 + 52 + 8 + 48, .vdisplay = 1280, - .vsync_start = 1280 + 8, - .vsync_end = 1280 + 8 + 48, - .vtotal = 1280 + 8 + 48 + 52, + .vsync_start = 1280 + 16, + .vsync_end = 1280 + 16 + 6, + .vtotal = 1280 + 16 + 6 + 15, .width_mm = 135, .height_mm = 217, -- cgit v1.2.3 From 3e4c31e8f70251732529a10934355084c7fab0ac Mon Sep 17 00:00:00 2001 From: Anitha Chrisanthus Date: Tue, 15 Dec 2020 11:13:09 -0800 Subject: drm/kmb: Work around for higher system clock Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_dsi.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c index 1793cd31b117..86e8e7943e89 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.c +++ b/drivers/gpu/drm/kmb/kmb_dsi.c @@ -482,6 +482,10 @@ static u32 mipi_tx_fg_section_cfg(struct kmb_dsi *kmb_dsi, return 0; } +#define CLK_DIFF_LOW 50 +#define CLK_DIFF_HI 60 +#define SYSCLK_500 500 + static void mipi_tx_fg_cfg_regs(struct kmb_dsi *kmb_dsi, u8 frame_gen, struct mipi_tx_frame_timing_cfg *fg_cfg) { @@ -492,7 +496,12 @@ static void mipi_tx_fg_cfg_regs(struct kmb_dsi *kmb_dsi, u8 frame_gen, /* 500 Mhz system clock minus 50 to account for the difference in * MIPI clock speed in RTL tests */ - sysclk = kmb_dsi->sys_clk_mhz - 50; + if (kmb_dsi->sys_clk_mhz == SYSCLK_500) { + sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_LOW; + } else { + /* 700 Mhz clk*/ + sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_HI; + } /* PPL-Pixel Packing Layer, LLP-Low Level Protocol * Frame genartor timing parameters are clocked on the system clock, -- cgit v1.2.3 From a79f40cccd4644c32f6d5ae1ccf091a262e1dc57 Mon Sep 17 00:00:00 2001 From: Anitha Chrisanthus Date: Fri, 8 Jan 2021 14:34:13 -0800 Subject: drm/kmb: Limit supported mode to 1080p KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea Signed-off-by: Edmund Dea Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_crtc.c | 34 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/kmb/kmb_drv.h | 9 ++++++++- 2 files changed, 42 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c index 44327bc629ca..08a45e813db7 100644 --- a/drivers/gpu/drm/kmb/kmb_crtc.c +++ b/drivers/gpu/drm/kmb/kmb_crtc.c @@ -185,11 +185,45 @@ static void kmb_crtc_atomic_flush(struct drm_crtc *crtc, spin_unlock_irq(&crtc->dev->event_lock); } +static enum drm_mode_status + kmb_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + int refresh; + struct drm_device *dev = crtc->dev; + int vfp = mode->vsync_start - mode->vdisplay; + + if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) { + drm_dbg(dev, "height = %d less than %d", + mode->vdisplay, KMB_CRTC_MAX_HEIGHT); + return MODE_BAD_VVALUE; + } + if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) { + drm_dbg(dev, "width = %d less than %d", + mode->hdisplay, KMB_CRTC_MAX_WIDTH); + return MODE_BAD_HVALUE; + } + refresh = drm_mode_vrefresh(mode); + if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) { + drm_dbg(dev, "refresh = %d less than %d or greater than %d", + refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH); + return MODE_BAD; + } + + if (vfp < KMB_CRTC_MIN_VFP) { + drm_dbg(dev, "vfp = %d less than %d", vfp, KMB_CRTC_MIN_VFP); + return MODE_BAD; + } + + return MODE_OK; +} + static const struct drm_crtc_helper_funcs kmb_crtc_helper_funcs = { .atomic_begin = kmb_crtc_atomic_begin, .atomic_enable = kmb_crtc_atomic_enable, .atomic_disable = kmb_crtc_atomic_disable, .atomic_flush = kmb_crtc_atomic_flush, + .mode_valid = kmb_crtc_mode_valid, }; int kmb_setup_crtc(struct drm_device *drm) diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index 69a62e2d03ff..4f7a98667626 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -20,11 +20,18 @@ #define DRIVER_MAJOR 1 #define DRIVER_MINOR 1 +/* Platform definitions */ +#define KMB_CRTC_MIN_VFP 4 +#define KMB_CRTC_MAX_WIDTH 1920 /* max width in pixels */ +#define KMB_CRTC_MAX_HEIGHT 1080 /* max height in pixels */ +#define KMB_CRTC_MIN_WIDTH 1920 +#define KMB_CRTC_MIN_HEIGHT 1080 #define KMB_FB_MAX_WIDTH 1920 #define KMB_FB_MAX_HEIGHT 1080 #define KMB_FB_MIN_WIDTH 1 #define KMB_FB_MIN_HEIGHT 1 - +#define KMB_MIN_VREFRESH 59 /*vertical refresh in Hz */ +#define KMB_MAX_VREFRESH 60 /*vertical refresh in Hz */ #define KMB_LCD_DEFAULT_CLK 200000000 #define KMB_SYS_CLK_MHZ 500 -- cgit v1.2.3 From 13047a092c6d3f23b7d684b5b3fe46b2b50423b9 Mon Sep 17 00:00:00 2001 From: Edmund Dea Date: Tue, 20 Apr 2021 15:31:53 -0700 Subject: drm/kmb: Remove clearing DPHY regs Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_dsi.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c index 86e8e7943e89..a0669b842ff5 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.c +++ b/drivers/gpu/drm/kmb/kmb_dsi.c @@ -1393,11 +1393,6 @@ int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode, mipi_tx_init_cfg.lane_rate_mbps = data_rate; } - kmb_write_mipi(kmb_dsi, DPHY_ENABLE, 0); - kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL0, 0); - kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL1, 0); - kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL2, 0); - /* Initialize mipi controller */ mipi_tx_init_cntrl(kmb_dsi, &mipi_tx_init_cfg); -- cgit v1.2.3 From 982f8ad666a1123028a077b6b009871a0dc9df26 Mon Sep 17 00:00:00 2001 From: Edmund Dea Date: Wed, 6 Oct 2021 16:03:48 -0700 Subject: drm/kmb: Disable change of plane parameters Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_drv.h | 1 + drivers/gpu/drm/kmb/kmb_plane.c | 43 ++++++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/kmb/kmb_plane.h | 6 ++++++ 3 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index 4f7a98667626..bf085e95b28f 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -57,6 +57,7 @@ struct kmb_drm_private { spinlock_t irq_lock; int irq_lcd; int sys_clk_mhz; + struct disp_cfg init_disp_cfg[KMB_MAX_PLANES]; struct layer_status plane_status[KMB_MAX_PLANES]; int kmb_under_flow; int kmb_flush_done; diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index 06b0c42c9e91..00404ba4126d 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -67,8 +67,21 @@ static const u32 kmb_formats_v[] = { static unsigned int check_pixel_format(struct drm_plane *plane, u32 format) { + struct kmb_drm_private *kmb; + struct kmb_plane *kmb_plane = to_kmb_plane(plane); int i; + int plane_id = kmb_plane->id; + struct disp_cfg init_disp_cfg; + kmb = to_kmb(plane->dev); + init_disp_cfg = kmb->init_disp_cfg[plane_id]; + /* Due to HW limitations, changing pixel format after initial + * plane configuration is not supported. + */ + if (init_disp_cfg.format && init_disp_cfg.format != format) { + drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration"); + return -EINVAL; + } for (i = 0; i < plane->format_count; i++) { if (plane->format_types[i] == format) return 0; @@ -81,11 +94,17 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, { struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); + struct kmb_drm_private *kmb; + struct kmb_plane *kmb_plane = to_kmb_plane(plane); + int plane_id = kmb_plane->id; + struct disp_cfg init_disp_cfg; struct drm_framebuffer *fb; int ret; struct drm_crtc_state *crtc_state; bool can_position; + kmb = to_kmb(plane->dev); + init_disp_cfg = kmb->init_disp_cfg[plane_id]; fb = new_plane_state->fb; if (!fb || !new_plane_state->crtc) return 0; @@ -99,6 +118,16 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, new_plane_state->crtc_w < KMB_FB_MIN_WIDTH || new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT) return -EINVAL; + + /* Due to HW limitations, changing plane height or width after + * initial plane configuration is not supported. + */ + if ((init_disp_cfg.width && init_disp_cfg.height) && + (init_disp_cfg.width != fb->width || + init_disp_cfg.height != fb->height)) { + drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration"); + return -EINVAL; + } can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY); crtc_state = drm_atomic_get_existing_crtc_state(state, @@ -335,6 +364,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, unsigned char plane_id; int num_planes; static dma_addr_t addr[MAX_SUB_PLANES]; + struct disp_cfg *init_disp_cfg; if (!plane || !new_plane_state || !old_plane_state) return; @@ -357,7 +387,8 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, } spin_unlock_irq(&kmb->irq_lock); - src_w = (new_plane_state->src_w >> 16); + init_disp_cfg = &kmb->init_disp_cfg[plane_id]; + src_w = new_plane_state->src_w >> 16; src_h = new_plane_state->src_h >> 16; crtc_x = new_plane_state->crtc_x; crtc_y = new_plane_state->crtc_y; @@ -500,6 +531,16 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, /* Enable DMA */ kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg); + + /* Save initial display config */ + if (!init_disp_cfg->width || + !init_disp_cfg->height || + !init_disp_cfg->format) { + init_disp_cfg->width = width; + init_disp_cfg->height = height; + init_disp_cfg->format = fb->format->format; + } + drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg, kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id))); diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h index 6e8d22cf8819..b51144044fe8 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.h +++ b/drivers/gpu/drm/kmb/kmb_plane.h @@ -63,6 +63,12 @@ struct layer_status { u32 ctrl; }; +struct disp_cfg { + unsigned int width; + unsigned int height; + unsigned int format; +}; + struct kmb_plane *kmb_plane_init(struct drm_device *drm); void kmb_plane_destroy(struct drm_plane *plane); #endif /* __KMB_PLANE_H__ */ -- cgit v1.2.3 From 004d2719806fb8e355c1bccd538e82c04319d391 Mon Sep 17 00:00:00 2001 From: Anitha Chrisanthus Date: Mon, 19 Jul 2021 16:28:51 -0700 Subject: drm/kmb: Corrected typo in handle_lcd_irq Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c index 12ce669650cc..961ac6fb5fcf 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.c +++ b/drivers/gpu/drm/kmb/kmb_drv.c @@ -380,7 +380,7 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev) if (val & LAYER3_DMA_FIFO_UNDERFLOW) drm_dbg(&kmb->drm, "LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val); - if (val & LAYER3_DMA_FIFO_UNDERFLOW) + if (val & LAYER3_DMA_FIFO_OVERFLOW) drm_dbg(&kmb->drm, "LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val); } -- cgit v1.2.3 From 74056092ff415e7e20ce2544689b32ee811c4f0b Mon Sep 17 00:00:00 2001 From: Anitha Chrisanthus Date: Mon, 7 Jun 2021 14:17:11 -0700 Subject: drm/kmb: Enable ADV bridge after modeset On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea Signed-off-by: Edmund Dea Signed-off-by: Anitha Chrisanthus Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/kmb/kmb_crtc.c | 7 ++++--- drivers/gpu/drm/kmb/kmb_dsi.c | 9 +++++---- drivers/gpu/drm/kmb/kmb_dsi.h | 2 +- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c index 08a45e813db7..06613ffeaaf8 100644 --- a/drivers/gpu/drm/kmb/kmb_crtc.c +++ b/drivers/gpu/drm/kmb/kmb_crtc.c @@ -66,7 +66,8 @@ static const struct drm_crtc_funcs kmb_crtc_funcs = { .disable_vblank = kmb_crtc_disable_vblank, }; -static void kmb_crtc_set_mode(struct drm_crtc *crtc) +static void kmb_crtc_set_mode(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) { struct drm_device *dev = crtc->dev; struct drm_display_mode *m = &crtc->state->adjusted_mode; @@ -75,7 +76,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc) unsigned int val = 0; /* Initialize mipi */ - kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz); + kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz, old_state); drm_info(dev, "vfp= %d vbp= %d vsync_len=%d hfp=%d hbp=%d hsync_len=%d\n", m->crtc_vsync_start - m->crtc_vdisplay, @@ -138,7 +139,7 @@ static void kmb_crtc_atomic_enable(struct drm_crtc *crtc, struct kmb_drm_private *kmb = crtc_to_kmb_priv(crtc); clk_prepare_enable(kmb->kmb_clk.clk_lcd); - kmb_crtc_set_mode(crtc); + kmb_crtc_set_mode(crtc, state); drm_crtc_vblank_on(crtc); } diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c index a0669b842ff5..f6071882054c 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.c +++ b/drivers/gpu/drm/kmb/kmb_dsi.c @@ -1331,7 +1331,8 @@ static u32 mipi_tx_init_dphy(struct kmb_dsi *kmb_dsi, return 0; } -static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi) +static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi, + struct drm_atomic_state *old_state) { struct regmap *msscam; @@ -1340,7 +1341,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi) dev_dbg(kmb_dsi->dev, "failed to get msscam syscon"); return; } - + drm_atomic_bridge_chain_enable(adv_bridge, old_state); /* DISABLE MIPI->CIF CONNECTION */ regmap_write(msscam, MSS_MIPI_CIF_CFG, 0); @@ -1351,7 +1352,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi) } int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode, - int sys_clk_mhz) + int sys_clk_mhz, struct drm_atomic_state *old_state) { u64 data_rate; @@ -1399,7 +1400,7 @@ int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode, /* Dphy initialization */ mipi_tx_init_dphy(kmb_dsi, &mipi_tx_init_cfg); - connect_lcd_to_mipi(kmb_dsi); + connect_lcd_to_mipi(kmb_dsi, old_state); dev_info(kmb_dsi->dev, "mipi hw initialized"); return 0; diff --git a/drivers/gpu/drm/kmb/kmb_dsi.h b/drivers/gpu/drm/kmb/kmb_dsi.h index 66b7c500d9bc..09dc88743d77 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.h +++ b/drivers/gpu/drm/kmb/kmb_dsi.h @@ -380,7 +380,7 @@ int kmb_dsi_host_bridge_init(struct device *dev); struct kmb_dsi *kmb_dsi_init(struct platform_device *pdev); void kmb_dsi_host_unregister(struct kmb_dsi *kmb_dsi); int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode, - int sys_clk_mhz); + int sys_clk_mhz, struct drm_atomic_state *old_state); int kmb_dsi_map_mmio(struct kmb_dsi *kmb_dsi); int kmb_dsi_clk_init(struct kmb_dsi *kmb_dsi); int kmb_dsi_encoder_init(struct drm_device *dev, struct kmb_dsi *kmb_dsi); -- cgit v1.2.3 From c62041c5baa9ded3bc6fd38d3f724de70683b489 Mon Sep 17 00:00:00 2001 From: Erik Ekman Date: Tue, 19 Oct 2021 23:13:32 +0200 Subject: sfc: Export fibre-specific supported link modes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman Acked-by: Martin Habets Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/mcdi_port_common.c | 37 ++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c index 4bd3ef8f3384..c4fe3c48ac46 100644 --- a/drivers/net/ethernet/sfc/mcdi_port_common.c +++ b/drivers/net/ethernet/sfc/mcdi_port_common.c @@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset) case MC_CMD_MEDIA_SFP_PLUS: case MC_CMD_MEDIA_QSFP_PLUS: SET_BIT(FIBRE); - if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) + if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) { SET_BIT(1000baseT_Full); - if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) - SET_BIT(10000baseT_Full); - if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) + SET_BIT(1000baseX_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) { + SET_BIT(10000baseCR_Full); + SET_BIT(10000baseLR_Full); + SET_BIT(10000baseSR_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) { SET_BIT(40000baseCR4_Full); - if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) + SET_BIT(40000baseSR4_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) { SET_BIT(100000baseCR4_Full); - if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) + SET_BIT(100000baseSR4_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) { SET_BIT(25000baseCR_Full); + SET_BIT(25000baseSR_Full); + } if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN)) SET_BIT(50000baseCR2_Full); break; @@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset) result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN); if (TEST_BIT(1000baseT_Half)) result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN); - if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full)) + if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) || + TEST_BIT(1000baseX_Full)) result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN); - if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full)) + if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) || + TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) || + TEST_BIT(10000baseSR_Full)) result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN); - if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full)) + if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) || + TEST_BIT(40000baseSR4_Full)) result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN); - if (TEST_BIT(100000baseCR4_Full)) + if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full)) result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN); - if (TEST_BIT(25000baseCR_Full)) + if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full)) result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN); if (TEST_BIT(50000baseCR2_Full)) result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN); -- cgit v1.2.3 From bf6abf345dfa77786aca554bc58c64bd428ecb1d Mon Sep 17 00:00:00 2001 From: Erik Ekman Date: Wed, 20 Oct 2021 00:40:16 +0200 Subject: sfc: Don't use netif_info before net_device setup Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman Acked-by: Martin Habets Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ptp.c | 4 ++-- drivers/net/ethernet/sfc/siena_sriov.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c index a39c5143b386..797e51802ccb 100644 --- a/drivers/net/ethernet/sfc/ptp.c +++ b/drivers/net/ethernet/sfc/ptp.c @@ -648,7 +648,7 @@ static int efx_ptp_get_attributes(struct efx_nic *efx) } else if (rc == -EINVAL) { fmt = MC_CMD_PTP_OUT_GET_ATTRIBUTES_SECONDS_NANOSECONDS; } else if (rc == -EPERM) { - netif_info(efx, probe, efx->net_dev, "no PTP support\n"); + pci_info(efx->pci_dev, "no PTP support\n"); return rc; } else { efx_mcdi_display_error(efx, MC_CMD_PTP, sizeof(inbuf), @@ -824,7 +824,7 @@ static int efx_ptp_disable(struct efx_nic *efx) * should only have been called during probe. */ if (rc == -ENOSYS || rc == -EPERM) - netif_info(efx, probe, efx->net_dev, "no PTP support\n"); + pci_info(efx->pci_dev, "no PTP support\n"); else if (rc) efx_mcdi_display_error(efx, MC_CMD_PTP, MC_CMD_PTP_IN_DISABLE_LEN, diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c index 83dcfcae3d4b..441e7f3e5375 100644 --- a/drivers/net/ethernet/sfc/siena_sriov.c +++ b/drivers/net/ethernet/sfc/siena_sriov.c @@ -1057,7 +1057,7 @@ void efx_siena_sriov_probe(struct efx_nic *efx) return; if (efx_siena_sriov_cmd(efx, false, &efx->vi_scale, &count)) { - netif_info(efx, probe, efx->net_dev, "no SR-IOV VFs probed\n"); + pci_info(efx->pci_dev, "no SR-IOV VFs probed\n"); return; } if (count > 0 && count > max_vfs) -- cgit v1.2.3 From b6b19a71c8bbde2abaa99ba29e6c76ddc84984f8 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 21 Oct 2021 17:13:53 +0800 Subject: ptp: free 'vclock_index' in ptp_clock_release() 'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller --- drivers/ptp/ptp_clock.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index 7fd02aabd79a..f9b2d66b0443 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -170,6 +170,7 @@ static void ptp_clock_release(struct device *dev) struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev); ptp_cleanup_pin_groups(ptp); + kfree(ptp->vclock_index); mutex_destroy(&ptp->tsevq_mux); mutex_destroy(&ptp->pincfg_mux); mutex_destroy(&ptp->n_vclocks_mux); @@ -286,8 +287,6 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, if (ptp->pps_source) pps_unregister_source(ptp->pps_source); - kfree(ptp->vclock_index); - if (ptp->kworker) kthread_destroy_worker(ptp->kworker); @@ -328,8 +327,6 @@ int ptp_clock_unregister(struct ptp_clock *ptp) ptp->defunct = 1; wake_up_interruptible(&ptp->tsev_wq); - kfree(ptp->vclock_index); - if (ptp->kworker) { kthread_cancel_delayed_work_sync(&ptp->aux_work); kthread_destroy_worker(ptp->kworker); -- cgit v1.2.3 From 0a30896fc5025e71c350449760b240fba5581b42 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 20 Oct 2021 23:08:16 +0200 Subject: MAINTAINERS: Add Dave Hansen to the x86 maintainer team Dave is already listed as x86/mm maintainer, has a profund knowledge of the x86 architecture in general and a good taste in terms of kernel programming in general. Add him as a full x86 maintainer with all rights and duties. Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov Acked-by: Borislav Petkov Acked-by: Andy Lutomirski Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/87zgr3flq7.ffs@tglx --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8d118d7957d2..f26920f0fa65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20336,6 +20336,7 @@ X86 ARCHITECTURE (32-BIT AND 64-BIT) M: Thomas Gleixner M: Ingo Molnar M: Borislav Petkov +M: Dave Hansen M: x86@kernel.org R: "H. Peter Anvin" L: linux-kernel@vger.kernel.org -- cgit v1.2.3 From fb8dc5fc8cbdfd62ecd16493848aee2f42ed84d9 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 20 Oct 2021 19:52:06 +0300 Subject: net: enetc: fix ethtool counter name for PM0_TERR There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean Reviewed-by: Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c index 9690e36e9e85..910b9f722504 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c @@ -157,7 +157,7 @@ static const struct { { ENETC_PM0_TFRM, "MAC tx frames" }, { ENETC_PM0_TFCS, "MAC tx fcs errors" }, { ENETC_PM0_TVLAN, "MAC tx VLAN frames" }, - { ENETC_PM0_TERR, "MAC tx frames" }, + { ENETC_PM0_TERR, "MAC tx frame errors" }, { ENETC_PM0_TUCA, "MAC tx unicast frames" }, { ENETC_PM0_TMCA, "MAC tx multicast frames" }, { ENETC_PM0_TBCA, "MAC tx broadcast frames" }, -- cgit v1.2.3 From e378f4967c8edd64c680f2e279cb646ee06b6f2d Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 20 Oct 2021 20:33:40 +0300 Subject: net: enetc: make sure all traffic classes can send large frames The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn Signed-off-by: Vladimir Oltean Reviewed-by: Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 4c977dfc44f0..d522bd5c90b4 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -517,10 +517,13 @@ static void enetc_port_si_configure(struct enetc_si *si) static void enetc_configure_port_mac(struct enetc_hw *hw) { + int tc; + enetc_port_wr(hw, ENETC_PM0_MAXFRM, ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE)); - enetc_port_wr(hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE); + for (tc = 0; tc < 8; tc++) + enetc_port_wr(hw, ENETC_PTCMSDUR(tc), ENETC_MAC_MAXFRM_SIZE); enetc_port_wr(hw, ENETC_PM0_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN | ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC); -- cgit v1.2.3 From 397430b50a363d8b7bdda00522123f82df6adc5e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 21 Oct 2021 14:29:44 +0200 Subject: usbnet: sanity check for maxpacket maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/usbnet.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 840c1c2ab16a..80432ee0ce69 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1788,6 +1788,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) if (!dev->rx_urb_size) dev->rx_urb_size = dev->hard_mtu; dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); + if (dev->maxpacket == 0) { + /* that is a broken device */ + goto out4; + } /* let userspace know we have a random address */ if (ether_addr_equal(net->dev_addr, node_id)) -- cgit v1.2.3 From a3ca5281bb771d8103ea16f0a6a8a5df9a7fb4f3 Mon Sep 17 00:00:00 2001 From: Chenyi Qiang Date: Thu, 21 Oct 2021 15:10:22 +0800 Subject: KVM: MMU: Reset mmu->pkru_mask to avoid stale data When updating mmu->pkru_mask, the value can only be added but it isn't reset in advance. This will make mmu->pkru_mask keep the stale data. Fix this issue. Fixes: 2d344105f57c ("KVM, pkeys: introduce pkru_mask to cache conditions") Signed-off-by: Chenyi Qiang Message-Id: <20211021071022.1140-1-chenyi.qiang@intel.com> Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/mmu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index 1a64ba5b9437..0cc58901bf7a 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -4596,10 +4596,10 @@ static void update_pkru_bitmask(struct kvm_mmu *mmu) unsigned bit; bool wp; - if (!is_cr4_pke(mmu)) { - mmu->pkru_mask = 0; + mmu->pkru_mask = 0; + + if (!is_cr4_pke(mmu)) return; - } wp = is_cr0_wp(mmu); -- cgit v1.2.3 From c8c340a9b4149fe5caa433f3b62463a1c8e07a46 Mon Sep 17 00:00:00 2001 From: Masahiro Kozuka Date: Tue, 14 Sep 2021 14:09:51 -0700 Subject: KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATA Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the PSP encrypts the data with the guest's key when writing to guest memory. If the target memory was not previously encrypted, the cache may contain dirty, unecrypted data that will persist on non-coherent systems. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda Cc: Marc Orr Cc: Tom Lendacky Cc: Brijesh Singh Signed-off-by: Masahiro Kozuka [sean: converted bug report to changelog] Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Message-Id: <20210914210951.2994260-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/sev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index 0d21d59936e5..2e4916be290e 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -1484,6 +1484,13 @@ static int sev_receive_update_data(struct kvm *kvm, struct kvm_sev_cmd *argp) goto e_free_trans; } + /* + * Flush (on non-coherent CPUs) before RECEIVE_UPDATE_DATA, the PSP + * encrypts the written data with the guest's key, and the cache may + * contain dirty, unencrypted data. + */ + sev_clflush_pages(guest_page, n); + /* The RECEIVE_UPDATE_DATA command requires C-bit to be always set. */ data.guest_address = (page_to_pfn(guest_page[0]) << PAGE_SHIFT) + offset; data.guest_address |= sev_me_mask; -- cgit v1.2.3 From b22fa62a35d7f2029d757a518d78041822b7c7c1 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Thu, 21 Oct 2021 13:20:29 +0100 Subject: io_uring: apply worker limits to previous users Another change to the API io-wq worker limitation API added in 5.15, apply the limit to all prior users that already registered a tctx. It may be confusing as it's now, in particular the change covers the following 2 cases: TASK1 | TASK2 _________________________________________________ ring = create() | | limit_iowq_workers() *not limited* | TASK1 | TASK2 _________________________________________________ ring = create() | | issue_requests() limit_iowq_workers() | | *not limited* A note on locking, it's safe to traverse ->tctx_list as we hold ->uring_lock, but do that after dropping sqd->lock to avoid possible problems. It's also safe to access tctx->io_wq there because tasks kill it only after removing themselves from tctx_list, see io_uring_cancel_generic() -> io_uring_clean_tctx() Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com Reviewed-by: Hao Xu Signed-off-by: Jens Axboe --- fs/io_uring.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index d5cc103224f1..bc18af5e0a93 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -10649,7 +10649,9 @@ static int io_unregister_iowq_aff(struct io_ring_ctx *ctx) static int io_register_iowq_max_workers(struct io_ring_ctx *ctx, void __user *arg) + __must_hold(&ctx->uring_lock) { + struct io_tctx_node *node; struct io_uring_task *tctx = NULL; struct io_sq_data *sqd = NULL; __u32 new_count[2]; @@ -10702,6 +10704,22 @@ static int io_register_iowq_max_workers(struct io_ring_ctx *ctx, if (copy_to_user(arg, new_count, sizeof(new_count))) return -EFAULT; + /* that's it for SQPOLL, only the SQPOLL task creates requests */ + if (sqd) + return 0; + + /* now propagate the restriction to all registered users */ + list_for_each_entry(node, &ctx->tctx_list, ctx_node) { + struct io_uring_task *tctx = node->task->io_uring; + + if (WARN_ON_ONCE(!tctx->io_wq)) + continue; + + for (i = 0; i < ARRAY_SIZE(new_count); i++) + new_count[i] = ctx->iowq_limits[i]; + /* ignore errors, it always returns zero anyway */ + (void)io_wq_max_workers(tctx->io_wq, new_count); + } return 0; err: if (sqd) { -- cgit v1.2.3 From 595cb5e0b832a3e100cbbdefef797b0c27bf725a Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 21 Oct 2021 10:30:06 -0500 Subject: Revert "drm/ast: Add detect function support" This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips Signed-off-by: Kim Phillips Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux Cc: Thomas Zimmermann Cc: David Airlie Cc: David Airlie Cc: Daniel Vetter Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III Cc: Borislav Petkov Cc: Borislav Petkov Cc: Jon Grimm Cc: dri-devel Cc: linux-kernel Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com --- drivers/gpu/drm/ast/ast_mode.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 6bfaefa01818..1e30eaeb0e1b 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1300,18 +1300,6 @@ static enum drm_mode_status ast_mode_valid(struct drm_connector *connector, return flags; } -static enum drm_connector_status ast_connector_detect(struct drm_connector - *connector, bool force) -{ - int r; - - r = ast_get_modes(connector); - if (r <= 0) - return connector_status_disconnected; - - return connector_status_connected; -} - static void ast_connector_destroy(struct drm_connector *connector) { struct ast_connector *ast_connector = to_ast_connector(connector); @@ -1327,7 +1315,6 @@ static const struct drm_connector_helper_funcs ast_connector_helper_funcs = { static const struct drm_connector_funcs ast_connector_funcs = { .reset = drm_atomic_helper_connector_reset, - .detect = ast_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = ast_connector_destroy, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, @@ -1355,8 +1342,7 @@ static int ast_connector_init(struct drm_device *dev) connector->interlace_allowed = 0; connector->doublescan_allowed = 0; - connector->polled = DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT; + connector->polled = DRM_CONNECTOR_POLL_CONNECT; drm_connector_attach_encoder(connector, encoder); @@ -1425,8 +1411,6 @@ int ast_mode_config_init(struct ast_private *ast) drm_mode_config_reset(dev); - drm_kms_helper_poll_init(dev); - return 0; } -- cgit v1.2.3 From 6c9a54551977ddf2d6e22c21354b4fb88946f96e Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 21 Oct 2021 10:09:28 +0300 Subject: Revert "memblock: exclude NOMAP regions from kmemleak" Commit 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak") breaks boot on EFI systems with kmemleak and VM_DEBUG enabled: efi: Processing EFI memory map: efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC] ------------[ cut here ]------------ kernel BUG at mm/kmemleak.c:1140! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104 pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kmemleak_free_part_phys+0x64/0x8c lr : kmemleak_free_part_phys+0x38/0x8c sp : ffff800011eafbc0 x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068 x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0 x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000 x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7 x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000 x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0 x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99 x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff Call trace: kmemleak_free_part_phys+0x64/0x8c memblock_mark_nomap+0x5c/0x78 reserve_regions+0x294/0x33c efi_init+0x2d0/0x490 setup_arch+0x80/0x138 start_kernel+0xa0/0x3ec __primary_switched+0xc0/0xc8 Code: 34000041 97d526e7 f9418e80 36000040 (d4210000) random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0 ---[ end trace 0000000000000000 ]--- The crash happens because kmemleak_free_part_phys() tries to use __va() before memstart_addr is initialized and this triggers a VM_BUG_ON() in arch/arm64/include/asm/memory.h: Revert 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak"), the issue it is fixing will be fixed differently. Reported-by: Qian Cai Signed-off-by: Mike Rapoport Acked-by: Catalin Marinas Signed-off-by: Linus Torvalds --- mm/memblock.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/mm/memblock.c b/mm/memblock.c index b91df5cf54d3..103b052c016e 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -936,12 +936,7 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size) */ int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size) { - int ret = memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP); - - if (!ret) - kmemleak_free_part_phys(base, size); - - return ret; + return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP); } /** -- cgit v1.2.3 From 658aafc8139c23a6a23f6f4d9a0c4c95476838d4 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 21 Oct 2021 10:09:29 +0300 Subject: memblock: exclude MEMBLOCK_NOMAP regions from kmemleak Vladimir Zapolskiy reports: Commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy Signed-off-by: Mike Rapoport Reviewed-by: Catalin Marinas Tested-by: Vladimir Zapolskiy Tested-by: Qian Cai Signed-off-by: Linus Torvalds --- drivers/acpi/tables.c | 3 +++ drivers/of/of_reserved_mem.c | 2 ++ mm/memblock.c | 3 +++ 3 files changed, 8 insertions(+) diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index f9383736fa0f..71419eb16e09 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "internal.h" #ifdef CONFIG_ACPI_CUSTOM_DSDT @@ -601,6 +602,8 @@ void __init acpi_table_upgrade(void) */ arch_reserve_mem_area(acpi_tables_addr, all_tables_size); + kmemleak_ignore_phys(acpi_tables_addr); + /* * early_ioremap only can remap 256k one time. If we map all * tables one time, we will hit the limit. Need to map chunks diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 59c1390cdf42..9da8835ba5a5 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "of_private.h" @@ -46,6 +47,7 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, err = memblock_mark_nomap(base, size); if (err) memblock_free(base, size); + kmemleak_ignore_phys(base); } return err; diff --git a/mm/memblock.c b/mm/memblock.c index 103b052c016e..5096500b2647 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -932,6 +932,9 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size) * covered by the memory map. The struct page representing NOMAP memory * frames in the memory map will be PageReserved() * + * Note: if the memory being marked %MEMBLOCK_NOMAP was allocated from + * memblock, the caller must inform kmemleak to ignore that memory + * * Return: 0 on success, -errno on failure. */ int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size) -- cgit v1.2.3 From b5998402e3de429b5e5f9bdea08ddf77c5fd661e Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 10:22:34 -0400 Subject: KVM: SEV-ES: rename guest_ins_data to sev_pio_data We will be using this field for OUTS emulation as well, in case the data that is pushed via OUTS spans more than one page. In that case, there will be a need to save the data pointer across exits to userspace. So, change the name to something that refers to any kind of PIO. Also spell out what it is used for, namely SEV-ES. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/x86.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index f8f48a7ec577..6bed6c416c6c 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -702,7 +702,7 @@ struct kvm_vcpu_arch { struct kvm_pio_request pio; void *pio_data; - void *guest_ins_data; + void *sev_pio_data; u8 event_exit_inst_len; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 381384a54790..379175b725a1 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12370,7 +12370,7 @@ EXPORT_SYMBOL_GPL(kvm_sev_es_mmio_read); static int complete_sev_es_emulated_ins(struct kvm_vcpu *vcpu) { - memcpy(vcpu->arch.guest_ins_data, vcpu->arch.pio_data, + memcpy(vcpu->arch.sev_pio_data, vcpu->arch.pio_data, vcpu->arch.pio.count * vcpu->arch.pio.size); vcpu->arch.pio.count = 0; @@ -12402,7 +12402,7 @@ static int kvm_sev_es_ins(struct kvm_vcpu *vcpu, unsigned int size, if (ret) { vcpu->arch.pio.count = 0; } else { - vcpu->arch.guest_ins_data = data; + vcpu->arch.sev_pio_data = data; vcpu->arch.complete_userspace_io = complete_sev_es_emulated_ins; } -- cgit v1.2.3 From 0d33b1baeb6ca7165d5ed4fdd1a8f969985e35b9 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 13 Oct 2021 12:29:42 -0400 Subject: KVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_out Currently emulator_pio_in clears vcpu->arch.pio.count twice if emulator_pio_in_out performs kernel PIO. Move the clear into emulator_pio_out where it is actually necessary. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 379175b725a1..dff28a4fbb21 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6914,10 +6914,8 @@ static int emulator_pio_in_out(struct kvm_vcpu *vcpu, int size, vcpu->arch.pio.count = count; vcpu->arch.pio.size = size; - if (!kernel_pio(vcpu, vcpu->arch.pio_data)) { - vcpu->arch.pio.count = 0; + if (!kernel_pio(vcpu, vcpu->arch.pio_data)) return 1; - } vcpu->run->exit_reason = KVM_EXIT_IO; vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT; @@ -6963,9 +6961,16 @@ static int emulator_pio_out(struct kvm_vcpu *vcpu, int size, unsigned short port, const void *val, unsigned int count) { + int ret; + memcpy(vcpu->arch.pio_data, val, size * count); trace_kvm_pio(KVM_PIO_OUT, port, size, count, vcpu->arch.pio_data); - return emulator_pio_in_out(vcpu, size, port, (void *)val, count, false); + ret = emulator_pio_in_out(vcpu, size, port, (void *)val, count, false); + if (ret) + vcpu->arch.pio.count = 0; + + return ret; + } static int emulator_pio_out_emulated(struct x86_emulate_ctxt *ctxt, -- cgit v1.2.3 From ea724ea420aac58b41bc822d1aed6940b136b78d Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 10:51:55 -0400 Subject: KVM: SEV-ES: clean up kvm_sev_es_ins/outs A few very small cleanups to the functions, smushed together because the patch is already very small like this: - inline emulator_pio_in_emulated and emulator_pio_out_emulated, since we already have the vCPU - remove the data argument and pull setting vcpu->arch.sev_pio_data into the caller - remove unnecessary clearing of vcpu->arch.pio.count when emulation is done by the kernel (and therefore vcpu->arch.pio.count is already clear on exit from emulator_pio_in and emulator_pio_out). No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index dff28a4fbb21..78ed0fe9fa1e 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12383,34 +12383,32 @@ static int complete_sev_es_emulated_ins(struct kvm_vcpu *vcpu) } static int kvm_sev_es_outs(struct kvm_vcpu *vcpu, unsigned int size, - unsigned int port, void *data, unsigned int count) + unsigned int port, unsigned int count) { - int ret; + int ret = emulator_pio_out(vcpu, size, port, + vcpu->arch.sev_pio_data, count); - ret = emulator_pio_out_emulated(vcpu->arch.emulate_ctxt, size, port, - data, count); - if (ret) + if (ret) { + /* Emulation done by the kernel. */ return ret; + } vcpu->arch.pio.count = 0; - return 0; } static int kvm_sev_es_ins(struct kvm_vcpu *vcpu, unsigned int size, - unsigned int port, void *data, unsigned int count) + unsigned int port, unsigned int count) { - int ret; + int ret = emulator_pio_in(vcpu, size, port, + vcpu->arch.sev_pio_data, count); - ret = emulator_pio_in_emulated(vcpu->arch.emulate_ctxt, size, port, - data, count); if (ret) { - vcpu->arch.pio.count = 0; - } else { - vcpu->arch.sev_pio_data = data; - vcpu->arch.complete_userspace_io = complete_sev_es_emulated_ins; + /* Emulation done by the kernel. */ + return ret; } + vcpu->arch.complete_userspace_io = complete_sev_es_emulated_ins; return 0; } @@ -12418,8 +12416,9 @@ int kvm_sev_es_string_io(struct kvm_vcpu *vcpu, unsigned int size, unsigned int port, void *data, unsigned int count, int in) { - return in ? kvm_sev_es_ins(vcpu, size, port, data, count) - : kvm_sev_es_outs(vcpu, size, port, data, count); + vcpu->arch.sev_pio_data = data; + return in ? kvm_sev_es_ins(vcpu, size, port, count) + : kvm_sev_es_outs(vcpu, size, port, count); } EXPORT_SYMBOL_GPL(kvm_sev_es_string_io); -- cgit v1.2.3 From 3b27de27183911d461afedf50c6fa30c59740c07 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 13 Oct 2021 12:32:02 -0400 Subject: KVM: x86: split the two parts of emulator_pio_in emulator_pio_in handles both the case where the data is pending in vcpu->arch.pio.count, and the case where I/O has to be done via either an in-kernel device or a userspace exit. For SEV-ES we would like to split these, to identify clearly the moment at which the sev_pio_data is consumed. To this end, create two different functions: __emulator_pio_in fills in vcpu->arch.pio.count, while complete_emulator_pio_in clears it and releases vcpu->arch.pio.data. Because this patch has to be backported, things are left a bit messy. kernel_pio() operates on vcpu->arch.pio, which leads to emulator_pio_in() having with two calls to complete_emulator_pio_in(). It will be fixed in the next release. While at it, remove the unused void* val argument of emulator_pio_in_out. The function currently hardcodes vcpu->arch.pio_data as the source/destination buffer, which sucks but will be fixed after the more severe SEV-ES buffer overflow. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 45 ++++++++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 78ed0fe9fa1e..c51ea81019e3 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6906,7 +6906,7 @@ static int kernel_pio(struct kvm_vcpu *vcpu, void *pd) } static int emulator_pio_in_out(struct kvm_vcpu *vcpu, int size, - unsigned short port, void *val, + unsigned short port, unsigned int count, bool in) { vcpu->arch.pio.port = port; @@ -6927,26 +6927,38 @@ static int emulator_pio_in_out(struct kvm_vcpu *vcpu, int size, return 0; } -static int emulator_pio_in(struct kvm_vcpu *vcpu, int size, - unsigned short port, void *val, unsigned int count) +static int __emulator_pio_in(struct kvm_vcpu *vcpu, int size, + unsigned short port, unsigned int count) { - int ret; + WARN_ON(vcpu->arch.pio.count); + memset(vcpu->arch.pio_data, 0, size * count); + return emulator_pio_in_out(vcpu, size, port, count, true); +} - if (vcpu->arch.pio.count) - goto data_avail; +static void complete_emulator_pio_in(struct kvm_vcpu *vcpu, int size, + unsigned short port, void *val) +{ + memcpy(val, vcpu->arch.pio_data, size * vcpu->arch.pio.count); + trace_kvm_pio(KVM_PIO_IN, port, size, vcpu->arch.pio.count, vcpu->arch.pio_data); + vcpu->arch.pio.count = 0; +} - memset(vcpu->arch.pio_data, 0, size * count); +static int emulator_pio_in(struct kvm_vcpu *vcpu, int size, + unsigned short port, void *val, unsigned int count) +{ + if (vcpu->arch.pio.count) { + /* Complete previous iteration. */ + } else { + int r = __emulator_pio_in(vcpu, size, port, count); + if (!r) + return r; - ret = emulator_pio_in_out(vcpu, size, port, val, count, true); - if (ret) { -data_avail: - memcpy(val, vcpu->arch.pio_data, size * count); - trace_kvm_pio(KVM_PIO_IN, port, size, count, vcpu->arch.pio_data); - vcpu->arch.pio.count = 0; - return 1; + /* Results already available, fall through. */ } - return 0; + WARN_ON(count != vcpu->arch.pio.count); + complete_emulator_pio_in(vcpu, size, port, val); + return 1; } static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt, @@ -6965,12 +6977,11 @@ static int emulator_pio_out(struct kvm_vcpu *vcpu, int size, memcpy(vcpu->arch.pio_data, val, size * count); trace_kvm_pio(KVM_PIO_OUT, port, size, count, vcpu->arch.pio_data); - ret = emulator_pio_in_out(vcpu, size, port, (void *)val, count, false); + ret = emulator_pio_in_out(vcpu, size, port, count, false); if (ret) vcpu->arch.pio.count = 0; return ret; - } static int emulator_pio_out_emulated(struct x86_emulate_ctxt *ctxt, -- cgit v1.2.3 From 6b5efc930bbc8c97e4a1fe2ccb9a6f286365a56d Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 12:35:20 -0400 Subject: KVM: x86: remove unnecessary arguments from complete_emulator_pio_in complete_emulator_pio_in can expect that vcpu->arch.pio has been filled in, and therefore does not need the size and count arguments. This makes things nicer when the function is called directly from a complete_userspace_io callback. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c51ea81019e3..63f9cb33cc19 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6935,11 +6935,12 @@ static int __emulator_pio_in(struct kvm_vcpu *vcpu, int size, return emulator_pio_in_out(vcpu, size, port, count, true); } -static void complete_emulator_pio_in(struct kvm_vcpu *vcpu, int size, - unsigned short port, void *val) +static void complete_emulator_pio_in(struct kvm_vcpu *vcpu, void *val) { - memcpy(val, vcpu->arch.pio_data, size * vcpu->arch.pio.count); - trace_kvm_pio(KVM_PIO_IN, port, size, vcpu->arch.pio.count, vcpu->arch.pio_data); + int size = vcpu->arch.pio.size; + unsigned count = vcpu->arch.pio.count; + memcpy(val, vcpu->arch.pio_data, size * count); + trace_kvm_pio(KVM_PIO_IN, vcpu->arch.pio.port, size, count, vcpu->arch.pio_data); vcpu->arch.pio.count = 0; } @@ -6957,7 +6958,7 @@ static int emulator_pio_in(struct kvm_vcpu *vcpu, int size, } WARN_ON(count != vcpu->arch.pio.count); - complete_emulator_pio_in(vcpu, size, port, val); + complete_emulator_pio_in(vcpu, val); return 1; } -- cgit v1.2.3 From 4fa4b38dae6fc6a3695695add8c18fa8b6a05a1a Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 11:25:45 -0400 Subject: KVM: SEV-ES: keep INS functions together Make the diff a little nicer when we actually get to fixing the bug. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 63f9cb33cc19..23e772412134 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12385,15 +12385,6 @@ int kvm_sev_es_mmio_read(struct kvm_vcpu *vcpu, gpa_t gpa, unsigned int bytes, } EXPORT_SYMBOL_GPL(kvm_sev_es_mmio_read); -static int complete_sev_es_emulated_ins(struct kvm_vcpu *vcpu) -{ - memcpy(vcpu->arch.sev_pio_data, vcpu->arch.pio_data, - vcpu->arch.pio.count * vcpu->arch.pio.size); - vcpu->arch.pio.count = 0; - - return 1; -} - static int kvm_sev_es_outs(struct kvm_vcpu *vcpu, unsigned int size, unsigned int port, unsigned int count) { @@ -12409,6 +12400,15 @@ static int kvm_sev_es_outs(struct kvm_vcpu *vcpu, unsigned int size, return 0; } +static int complete_sev_es_emulated_ins(struct kvm_vcpu *vcpu) +{ + memcpy(vcpu->arch.sev_pio_data, vcpu->arch.pio_data, + vcpu->arch.pio.count * vcpu->arch.pio.size); + vcpu->arch.pio.count = 0; + + return 1; +} + static int kvm_sev_es_ins(struct kvm_vcpu *vcpu, unsigned int size, unsigned int port, unsigned int count) { -- cgit v1.2.3 From 95e16b4792b0429f1933872f743410f00e590c55 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 12 Oct 2021 11:33:03 -0400 Subject: KVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if needed The PIO scratch buffer is larger than a single page, and therefore it is not possible to copy it in a single step to vcpu->arch/pio_data. Bound each call to emulator_pio_in/out to a single page; keep track of how many I/O operations are left in vcpu->arch.sev_pio_count, so that the operation can be restarted in the complete_userspace_io callback. For OUT, this means that the previous kvm_sev_es_outs implementation becomes an iterator of the loop, and we can consume the sev_pio_data buffer before leaving to userspace. For IN, instead, consuming the buffer and decreasing sev_pio_count is always done in the complete_userspace_io callback, because that is when the memcpy is done into sev_pio_data. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reported-by: Felix Wilhelm Reviewed-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/x86.c | 72 ++++++++++++++++++++++++++++++++--------- 2 files changed, 57 insertions(+), 16 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 6bed6c416c6c..5a0298aa56ba 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -703,6 +703,7 @@ struct kvm_vcpu_arch { struct kvm_pio_request pio; void *pio_data; void *sev_pio_data; + unsigned sev_pio_count; u8 event_exit_inst_len; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 23e772412134..b26647a5ea22 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12386,38 +12386,77 @@ int kvm_sev_es_mmio_read(struct kvm_vcpu *vcpu, gpa_t gpa, unsigned int bytes, EXPORT_SYMBOL_GPL(kvm_sev_es_mmio_read); static int kvm_sev_es_outs(struct kvm_vcpu *vcpu, unsigned int size, - unsigned int port, unsigned int count) + unsigned int port); + +static int complete_sev_es_emulated_outs(struct kvm_vcpu *vcpu) { - int ret = emulator_pio_out(vcpu, size, port, - vcpu->arch.sev_pio_data, count); + int size = vcpu->arch.pio.size; + int port = vcpu->arch.pio.port; + + vcpu->arch.pio.count = 0; + if (vcpu->arch.sev_pio_count) + return kvm_sev_es_outs(vcpu, size, port); + return 1; +} + +static int kvm_sev_es_outs(struct kvm_vcpu *vcpu, unsigned int size, + unsigned int port) +{ + for (;;) { + unsigned int count = + min_t(unsigned int, PAGE_SIZE / size, vcpu->arch.sev_pio_count); + int ret = emulator_pio_out(vcpu, size, port, vcpu->arch.sev_pio_data, count); + + /* memcpy done already by emulator_pio_out. */ + vcpu->arch.sev_pio_count -= count; + vcpu->arch.sev_pio_data += count * vcpu->arch.pio.size; + if (!ret) + break; - if (ret) { /* Emulation done by the kernel. */ - return ret; + if (!vcpu->arch.sev_pio_count) + return 1; } - vcpu->arch.pio.count = 0; + vcpu->arch.complete_userspace_io = complete_sev_es_emulated_outs; return 0; } +static int kvm_sev_es_ins(struct kvm_vcpu *vcpu, unsigned int size, + unsigned int port); + +static void advance_sev_es_emulated_ins(struct kvm_vcpu *vcpu) +{ + unsigned count = vcpu->arch.pio.count; + complete_emulator_pio_in(vcpu, vcpu->arch.sev_pio_data); + vcpu->arch.sev_pio_count -= count; + vcpu->arch.sev_pio_data += count * vcpu->arch.pio.size; +} + static int complete_sev_es_emulated_ins(struct kvm_vcpu *vcpu) { - memcpy(vcpu->arch.sev_pio_data, vcpu->arch.pio_data, - vcpu->arch.pio.count * vcpu->arch.pio.size); - vcpu->arch.pio.count = 0; + int size = vcpu->arch.pio.size; + int port = vcpu->arch.pio.port; + advance_sev_es_emulated_ins(vcpu); + if (vcpu->arch.sev_pio_count) + return kvm_sev_es_ins(vcpu, size, port); return 1; } static int kvm_sev_es_ins(struct kvm_vcpu *vcpu, unsigned int size, - unsigned int port, unsigned int count) + unsigned int port) { - int ret = emulator_pio_in(vcpu, size, port, - vcpu->arch.sev_pio_data, count); + for (;;) { + unsigned int count = + min_t(unsigned int, PAGE_SIZE / size, vcpu->arch.sev_pio_count); + if (!__emulator_pio_in(vcpu, size, port, count)) + break; - if (ret) { /* Emulation done by the kernel. */ - return ret; + advance_sev_es_emulated_ins(vcpu); + if (!vcpu->arch.sev_pio_count) + return 1; } vcpu->arch.complete_userspace_io = complete_sev_es_emulated_ins; @@ -12429,8 +12468,9 @@ int kvm_sev_es_string_io(struct kvm_vcpu *vcpu, unsigned int size, int in) { vcpu->arch.sev_pio_data = data; - return in ? kvm_sev_es_ins(vcpu, size, port, count) - : kvm_sev_es_outs(vcpu, size, port, count); + vcpu->arch.sev_pio_count = count; + return in ? kvm_sev_es_ins(vcpu, size, port) + : kvm_sev_es_outs(vcpu, size, port); } EXPORT_SYMBOL_GPL(kvm_sev_es_string_io); -- cgit v1.2.3 From 8017c99680fa65e1e8d999df1583de476a187830 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Oct 2021 15:19:08 +0200 Subject: hyperv/vmbus: include linux/bitops.h On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu --- drivers/hv/hyperv_vmbus.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index 42f3d9d123a1..d030577ad6a2 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -13,6 +13,7 @@ #define _HYPERV_VMBUS_H #include +#include #include #include #include -- cgit v1.2.3 From 87066fdd2e30fe9dd531125d95257c118a74617e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 Oct 2021 09:48:33 -1000 Subject: Revert "mm/secretmem: use refcount_t instead of atomic_t" This reverts commit 110860541f443f950c1274f217a1a3e298670a33. Converting the "secretmem_users" counter to a refcount is incorrect, because a refcount is special in zero and can't just be incremented (but a count of users is not, and "no users" is actually perfectly valid and not a sign of a free'd resource). Reported-by: syzbot+75639e6a0331cd61d3e2@syzkaller.appspotmail.com Cc: Jordy Zomer Cc: Kees Cook , Cc: Jordy Zomer Cc: James Bottomley Cc: Mike Rapoport Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/secretmem.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/mm/secretmem.c b/mm/secretmem.c index 1fea68b8d5a6..030f02ddc7c1 100644 --- a/mm/secretmem.c +++ b/mm/secretmem.c @@ -18,7 +18,6 @@ #include #include #include -#include #include @@ -41,11 +40,11 @@ module_param_named(enable, secretmem_enable, bool, 0400); MODULE_PARM_DESC(secretmem_enable, "Enable secretmem and memfd_secret(2) system call"); -static refcount_t secretmem_users; +static atomic_t secretmem_users; bool secretmem_active(void) { - return !!refcount_read(&secretmem_users); + return !!atomic_read(&secretmem_users); } static vm_fault_t secretmem_fault(struct vm_fault *vmf) @@ -104,7 +103,7 @@ static const struct vm_operations_struct secretmem_vm_ops = { static int secretmem_release(struct inode *inode, struct file *file) { - refcount_dec(&secretmem_users); + atomic_dec(&secretmem_users); return 0; } @@ -218,7 +217,7 @@ SYSCALL_DEFINE1(memfd_secret, unsigned int, flags) file->f_flags |= O_LARGEFILE; fd_install(fd, file); - refcount_inc(&secretmem_users); + atomic_inc(&secretmem_users); return fd; err_put_fd: -- cgit v1.2.3 From a0023bb9dd9bc439d44604eeec62426a990054cd Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Fri, 22 Oct 2021 09:12:26 +0000 Subject: ata: sata_mv: Fix the error handling of mv_chip_id() mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe(). During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err(). Signed-off-by: Zheyu Ma Signed-off-by: Damien Le Moal --- drivers/ata/sata_mv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9d86203e1e7a..c53633d47bfb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3896,8 +3896,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; default: - dev_err(host->dev, "BUG: invalid board index %u\n", board_idx); - return 1; + dev_alert(host->dev, "BUG: invalid board index %u\n", board_idx); + return -EINVAL; } hpriv->hp_flags = hp_flags; -- cgit v1.2.3 From 00568b8a6364e15009b345b462e927e0b9fc2bb9 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Thu, 21 Oct 2021 10:26:57 +0100 Subject: ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My intel-ixp42x-welltech-epbx100 no longer boot since 4.14. This is due to commit 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression") which forgot to handle CONFIG_CPU_ENDIAN_BE32 as possible BE config. Suggested-by: Krzysztof Hałasa Fixes: 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression") Signed-off-by: Corentin Labbe Signed-off-by: Russell King (Oracle) --- arch/arm/kernel/head.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 29070eb8df7d..3fc7f9750ce4 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -253,7 +253,7 @@ __create_page_tables: add r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER) ldr r6, =(_end - 1) adr_l r5, kernel_sec_start @ _pa(kernel_sec_start) -#ifdef CONFIG_CPU_ENDIAN_BE8 +#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32 str r8, [r5, #4] @ Save physical start of kernel (BE) #else str r8, [r5] @ Save physical start of kernel (LE) @@ -266,7 +266,7 @@ __create_page_tables: bls 1b eor r3, r3, r7 @ Remove the MMU flags adr_l r5, kernel_sec_end @ _pa(kernel_sec_end) -#ifdef CONFIG_CPU_ENDIAN_BE8 +#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32 str r3, [r5, #4] @ Save physical end of kernel (BE) #else str r3, [r5] @ Save physical end of kernel (LE) -- cgit v1.2.3 From ac8a6eba2a117e0fdc04da62ab568d1b7ca4c8f6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 25 Oct 2021 10:46:41 -0700 Subject: spi: Fix tegra20 build with CONFIG_PM=n once again Commit efafec27c565 ("spi: Fix tegra20 build with CONFIG_PM=n") already fixed the build without PM support once. There was an alternative fix by Guenter in commit 2bab94090b01 ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally"), and Mark then merged the two correctly in ffb1e76f4f32 ("Merge tag 'v5.15-rc2' into spi-5.15"). But for some inexplicable reason, Mark then merged things _again_ in commit 59c4e190b10c ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed things up at that point, and the __maybe_unused attribute on tegra_slink_runtime_resume() went missing. Reinstate it, so that alpha (and other architectures without PM support) builds cleanly again. Btw, this is another prime example of how random back-merges are not good. Just don't do them. Subsystem developers should not merge my tree in any normal circumstances. Both of those merge commits pointed to above are bad: even the one that got the merge result right doesn't even mention _why_ it was done, and the one that got it wrong is obviously broken. Reported-by: Guenter Roeck Cc: Mark Brown Signed-off-by: Linus Torvalds --- drivers/spi/spi-tegra20-slink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 713292b0c71e..3226c4e1c7c0 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1194,7 +1194,7 @@ static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev) return 0; } -static int tegra_slink_runtime_resume(struct device *dev) +static int __maybe_unused tegra_slink_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct tegra_slink_data *tspi = spi_master_get_devdata(master); -- cgit v1.2.3 From cb685432398122053f3e1dc6a1d68924e5b77be4 Mon Sep 17 00:00:00 2001 From: "Matthew Wilcox (Oracle)" Date: Mon, 25 Oct 2021 19:16:34 +0100 Subject: secretmem: Prevent secretmem_users from wrapping to zero Commit 110860541f44 ("mm/secretmem: use refcount_t instead of atomic_t") attempted to fix the problem of secretmem_users wrapping to zero and allowing suspend once again. But it was reverted in commit 87066fdd2e30 ("Revert 'mm/secretmem: use refcount_t instead of atomic_t'") because of the problems it caused - a refcount_t was not semantically the right type to use. Instead prevent secretmem_users from wrapping to zero by forbidding new users if the number of users has wrapped from positive to negative. This stops a long way short of reaching the necessary 4 billion users where it wraps to zero again, so there's no need to be clever with special anti-wrap types or checking the return value from atomic_inc(). Signed-off-by: Matthew Wilcox (Oracle) Cc: Jordy Zomer Cc: Kees Cook , Cc: James Bottomley Cc: Mike Rapoport Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/secretmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/secretmem.c b/mm/secretmem.c index 030f02ddc7c1..c2dda408bb36 100644 --- a/mm/secretmem.c +++ b/mm/secretmem.c @@ -203,6 +203,8 @@ SYSCALL_DEFINE1(memfd_secret, unsigned int, flags) if (flags & ~(SECRETMEM_FLAGS_MASK | O_CLOEXEC)) return -EINVAL; + if (atomic_read(&secretmem_users) < 0) + return -ENFILE; fd = get_unused_fd_flags(flags & O_CLOEXEC); if (fd < 0) -- cgit v1.2.3 From 3906fe9bb7f1a2c8667ae54e967dc8690824f4ea Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 25 Oct 2021 11:30:31 -0700 Subject: Linux 5.15-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 91297670da8e..30c7c81d0437 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit v1.2.3