From 8a6be2bdb608dec6b988d2b9a875a88f8b684bfb Mon Sep 17 00:00:00 2001 From: Xie Xiaobo Date: Wed, 6 Nov 2013 17:08:03 +0800 Subject: powerpc/85xx: Add TWR-P1025 board support TWR-P1025 Overview ----------------- 512Mbyte DDR3 (on board DDR) 64MB Nor Flash eTSEC1: Connected to RGMII PHY AR8035 eTSEC3: Connected to RGMII PHY AR8035 Two USB2.0 Type A One microSD Card slot One mini-PCIe slot One mini-USB TypeB dual UART Signed-off-by: Michael Johnston Signed-off-by: Xie Xiaobo [scottwood@freescale.com: use pr_info rather than KERN_INFO] Signed-off-by: Scott Wood --- .../devicetree/bindings/video/ssd1289fb.txt | 13 + arch/powerpc/boot/dts/p1025twr.dts | 95 +++++++ arch/powerpc/boot/dts/p1025twr.dtsi | 280 +++++++++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 6 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/twr_p102x.c | 147 +++++++++++ 6 files changed, 542 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ssd1289fb.txt create mode 100644 arch/powerpc/boot/dts/p1025twr.dts create mode 100644 arch/powerpc/boot/dts/p1025twr.dtsi create mode 100644 arch/powerpc/platforms/85xx/twr_p102x.c diff --git a/Documentation/devicetree/bindings/video/ssd1289fb.txt b/Documentation/devicetree/bindings/video/ssd1289fb.txt new file mode 100644 index 000000000000..4fcd5e68cb6e --- /dev/null +++ b/Documentation/devicetree/bindings/video/ssd1289fb.txt @@ -0,0 +1,13 @@ +* Solomon SSD1289 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,ssd1289fb". The only supported bus for + now is lbc. + - reg: Should contain address of the controller on the LBC bus. The detail + was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt + +Examples: +display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; +}; diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts new file mode 100644 index 000000000000..9036a4987905 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi new file mode 100644 index 000000000000..8453501c256e --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dtsi @@ -0,0 +1,280 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4d4634958cfb..c17aae80e7ff 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -123,6 +123,12 @@ config P1023_RDS help This option enables support for the P1023 RDS and RDB boards +config TWR_P102x + bool "Freescale TWR-P102x" + select DEFAULT_UIMAGE + help + This option enables support for the TWR-P1025 board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index dd4c0b59577b..25cebe74ac46 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 000000000000..c25ff10f05ee --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,147 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3