From c26964ead57f0aa1dff4926aae2982b174798e7b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 1 Oct 2009 15:41:06 +0100 Subject: wm831x: Factor out WM831x backup battery charger The backup battery on WM831x is a separate IP block to the main PMU and is largely unrelated to the main supply functionality. Factor it out into a separate driver in order to reflect this and better support future hardware versions. Signed-off-by: Mark Brown Acked-by: Samuel Ortiz Signed-off-by: Anton Vorontsov --- drivers/mfd/wm831x-core.c | 9 ++ drivers/power/Kconfig | 7 ++ drivers/power/Makefile | 1 + drivers/power/wm831x_backup.c | 233 ++++++++++++++++++++++++++++++++++++++++++ drivers/power/wm831x_power.c | 144 +------------------------- 5 files changed, 253 insertions(+), 141 deletions(-) create mode 100644 drivers/power/wm831x_backup.c diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 49b7885c2702..6a35f2a2702c 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -793,6 +793,9 @@ static struct resource wm831x_wdt_resources[] = { }; static struct mfd_cell wm8310_devs[] = { + { + .name = "wm831x-backup", + }, { .name = "wm831x-buckv", .id = 1, @@ -946,6 +949,9 @@ static struct mfd_cell wm8310_devs[] = { }; static struct mfd_cell wm8311_devs[] = { + { + .name = "wm831x-backup", + }, { .name = "wm831x-buckv", .id = 1, @@ -1080,6 +1086,9 @@ static struct mfd_cell wm8311_devs[] = { }; static struct mfd_cell wm8312_devs[] = { + { + .name = "wm831x-backup", + }, { .name = "wm831x-buckv", .id = 1, diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index cea6cef27e89..783e9b790b02 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -29,6 +29,13 @@ config APM_POWER Say Y here to enable support APM status emulation using battery class devices. +config WM831X_BACKUP + tristate "WM831X backup battery charger support" + depends on MFD_WM831X + help + Say Y here to enable support for the backup battery charger + in the Wolfson Microelectronics WM831x PMICs. + config WM831X_POWER tristate "WM831X PMU support" depends on MFD_WM831X diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b96f29d91c28..d1406b9f02fb 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o obj-$(CONFIG_WM831X_POWER) += wm831x_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c new file mode 100644 index 000000000000..f181076a4085 --- /dev/null +++ b/drivers/power/wm831x_backup.c @@ -0,0 +1,233 @@ +/* + * Backup battery driver for Wolfson Microelectronics wm831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +struct wm831x_backup { + struct wm831x *wm831x; + struct power_supply backup; +}; + +static int wm831x_backup_read_voltage(struct wm831x *wm831x, + enum wm831x_auxadc src, + union power_supply_propval *val) +{ + int ret; + + ret = wm831x_auxadc_read_uv(wm831x, src); + if (ret >= 0) + val->intval = ret; + + return ret; +} + +/********************************************************************* + * Backup supply properties + *********************************************************************/ + +static void wm831x_config_backup(struct wm831x *wm831x) +{ + struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; + struct wm831x_backup_pdata *pdata; + int ret, reg; + + if (!wm831x_pdata || !wm831x_pdata->backup) { + dev_warn(wm831x->dev, + "No backup battery charger configuration\n"); + return; + } + + pdata = wm831x_pdata->backup; + + reg = 0; + + if (pdata->charger_enable) + reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; + if (pdata->no_constant_voltage) + reg |= WM831X_BKUP_CHG_MODE; + + switch (pdata->vlim) { + case 2500: + break; + case 3100: + reg |= WM831X_BKUP_CHG_VLIM; + break; + default: + dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", + pdata->vlim); + } + + switch (pdata->ilim) { + case 100: + break; + case 200: + reg |= 1; + break; + case 300: + reg |= 2; + break; + case 400: + reg |= 3; + break; + default: + dev_err(wm831x->dev, "Invalid backup current limit %duA\n", + pdata->ilim); + } + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, + WM831X_BKUP_CHG_ENA_MASK | + WM831X_BKUP_CHG_MODE_MASK | + WM831X_BKUP_BATT_DET_ENA_MASK | + WM831X_BKUP_CHG_VLIM_MASK | + WM831X_BKUP_CHG_ILIM_MASK, + reg); + if (ret != 0) + dev_err(wm831x->dev, + "Failed to set backup charger config: %d\n", ret); + + wm831x_reg_lock(wm831x); +} + +static int wm831x_backup_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_backup *devdata = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = devdata->wm831x; + int ret = 0; + + ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); + if (ret < 0) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_backup_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, + val); + break; + + case POWER_SUPPLY_PROP_PRESENT: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = 1; + else + val->intval = 0; + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_backup_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_PRESENT, +}; + +/********************************************************************* + * Initialisation + *********************************************************************/ + +static __devinit int wm831x_backup_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_backup *devdata; + struct power_supply *backup; + int ret, irq, i; + + devdata = kzalloc(sizeof(struct wm831x_backup), GFP_KERNEL); + if (devdata == NULL) + return -ENOMEM; + + devdata->wm831x = wm831x; + platform_set_drvdata(pdev, devdata); + + backup = &devdata->backup; + + /* We ignore configuration failures since we can still read + * back the status without enabling the charger (which may + * already be enabled anyway). + */ + wm831x_config_backup(wm831x); + + backup->name = "wm831x-backup"; + backup->type = POWER_SUPPLY_TYPE_BATTERY; + backup->properties = wm831x_backup_props; + backup->num_properties = ARRAY_SIZE(wm831x_backup_props); + backup->get_property = wm831x_backup_get_prop; + ret = power_supply_register(&pdev->dev, backup); + if (ret) + goto err_kmalloc; + + return ret; + +err_kmalloc: + kfree(devdata); + return ret; +} + +static __devexit int wm831x_backup_remove(struct platform_device *pdev) +{ + struct wm831x_backup *devdata = platform_get_drvdata(pdev); + + power_supply_unregister(&devdata->backup); + kfree(devdata); + + return 0; +} + +static struct platform_driver wm831x_backup_driver = { + .probe = wm831x_backup_probe, + .remove = __devexit_p(wm831x_backup_remove), + .driver = { + .name = "wm831x-backup", + }, +}; + +static int __init wm831x_backup_init(void) +{ + return platform_driver_register(&wm831x_backup_driver); +} +module_init(wm831x_backup_init); + +static void __exit wm831x_backup_exit(void) +{ + platform_driver_unregister(&wm831x_backup_driver); +} +module_exit(wm831x_backup_exit); + +MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs"); +MODULE_AUTHOR("Mark Brown "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-backup"); diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index 2a4c8b0b829c..f85e80b1b400 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -21,7 +21,6 @@ struct wm831x_power { struct wm831x *wm831x; struct power_supply wall; - struct power_supply backup; struct power_supply usb; struct power_supply battery; }; @@ -453,125 +452,6 @@ static irqreturn_t wm831x_bat_irq(int irq, void *data) } -/********************************************************************* - * Backup supply properties - *********************************************************************/ - -static void wm831x_config_backup(struct wm831x *wm831x) -{ - struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; - struct wm831x_backup_pdata *pdata; - int ret, reg; - - if (!wm831x_pdata || !wm831x_pdata->backup) { - dev_warn(wm831x->dev, - "No backup battery charger configuration\n"); - return; - } - - pdata = wm831x_pdata->backup; - - reg = 0; - - if (pdata->charger_enable) - reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; - if (pdata->no_constant_voltage) - reg |= WM831X_BKUP_CHG_MODE; - - switch (pdata->vlim) { - case 2500: - break; - case 3100: - reg |= WM831X_BKUP_CHG_VLIM; - break; - default: - dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", - pdata->vlim); - } - - switch (pdata->ilim) { - case 100: - break; - case 200: - reg |= 1; - break; - case 300: - reg |= 2; - break; - case 400: - reg |= 3; - break; - default: - dev_err(wm831x->dev, "Invalid backup current limit %duA\n", - pdata->ilim); - } - - ret = wm831x_reg_unlock(wm831x); - if (ret != 0) { - dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); - return; - } - - ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, - WM831X_BKUP_CHG_ENA_MASK | - WM831X_BKUP_CHG_MODE_MASK | - WM831X_BKUP_BATT_DET_ENA_MASK | - WM831X_BKUP_CHG_VLIM_MASK | - WM831X_BKUP_CHG_ILIM_MASK, - reg); - if (ret != 0) - dev_err(wm831x->dev, - "Failed to set backup charger config: %d\n", ret); - - wm831x_reg_lock(wm831x); -} - -static int wm831x_backup_get_prop(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); - struct wm831x *wm831x = wm831x_power->wm831x; - int ret = 0; - - ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); - if (ret < 0) - return ret; - - switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - if (ret & WM831X_BKUP_CHG_STS) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - break; - - case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, - val); - break; - - case POWER_SUPPLY_PROP_PRESENT: - if (ret & WM831X_BKUP_CHG_STS) - val->intval = 1; - else - val->intval = 0; - break; - - default: - ret = -EINVAL; - break; - } - - return ret; -} - -static enum power_supply_property wm831x_backup_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_PRESENT, -}; - /********************************************************************* * Initialisation *********************************************************************/ @@ -595,10 +475,7 @@ static irqreturn_t wm831x_pwr_src_irq(int irq, void *data) dev_dbg(wm831x->dev, "Power source changed\n"); - /* Just notify for everything - little harm in overnotifying. - * The backup battery is not a power source while the system - * is running so skip that. - */ + /* Just notify for everything - little harm in overnotifying. */ power_supply_changed(&wm831x_power->battery); power_supply_changed(&wm831x_power->usb); power_supply_changed(&wm831x_power->wall); @@ -613,7 +490,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) struct power_supply *usb; struct power_supply *battery; struct power_supply *wall; - struct power_supply *backup; int ret, irq, i; power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); @@ -626,13 +502,11 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) usb = &power->usb; battery = &power->battery; wall = &power->wall; - backup = &power->backup; /* We ignore configuration failures since we can still read back - * the status without enabling either of the chargers. + * the status without enabling the charger. */ wm831x_config_battery(wm831x); - wm831x_config_backup(wm831x); wall->name = "wm831x-wall"; wall->type = POWER_SUPPLY_TYPE_MAINS; @@ -661,15 +535,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) if (ret) goto err_battery; - backup->name = "wm831x-backup"; - backup->type = POWER_SUPPLY_TYPE_BATTERY; - backup->properties = wm831x_backup_props; - backup->num_properties = ARRAY_SIZE(wm831x_backup_props); - backup->get_property = wm831x_backup_get_prop; - ret = power_supply_register(&pdev->dev, backup); - if (ret) - goto err_usb; - irq = platform_get_irq_byname(pdev, "SYSLO"); ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq, IRQF_TRIGGER_RISING, "SYSLO", @@ -677,7 +542,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", irq, ret); - goto err_backup; + goto err_usb; } irq = platform_get_irq_byname(pdev, "PWR SRC"); @@ -716,8 +581,6 @@ err_bat_irq: err_syslo: irq = platform_get_irq_byname(pdev, "SYSLO"); wm831x_free_irq(wm831x, irq, power); -err_backup: - power_supply_unregister(backup); err_usb: power_supply_unregister(usb); err_battery: @@ -746,7 +609,6 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev) irq = platform_get_irq_byname(pdev, "SYSLO"); wm831x_free_irq(wm831x, irq, wm831x_power); - power_supply_unregister(&wm831x_power->backup); power_supply_unregister(&wm831x_power->battery); power_supply_unregister(&wm831x_power->wall); power_supply_unregister(&wm831x_power->usb); -- cgit v1.2.3 From 7677f33f0a813e98612dce97d5342c1f5046878a Mon Sep 17 00:00:00 2001 From: Sean McNeil Date: Thu, 5 Nov 2009 00:24:54 +0300 Subject: pcf50633: Add ac power supply class to the charger This adds an appropriate ac power_supply class and shows usb only when at the appropriate current limit. Signed-off-by: Sean McNeil Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 46 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index e8b278f71781..48e92c020f4b 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -36,6 +36,7 @@ struct pcf50633_mbc { struct power_supply usb; struct power_supply adapter; + struct power_supply ac; struct delayed_work charging_restart_work; }; @@ -237,6 +238,7 @@ pcf50633_mbc_irq_handler(int irq, void *data) else if (irq == PCF50633_IRQ_USBLIMOFF) mbc->usb_active = 1; + power_supply_changed(&mbc->ac); power_supply_changed(&mbc->usb); power_supply_changed(&mbc->adapter); @@ -269,10 +271,34 @@ static int usb_get_property(struct power_supply *psy, { struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb); int ret = 0; + u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) & + PCF50633_MBCC7_USB_MASK; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = mbc->usb_online && + (usblim <= PCF50633_MBCC7_USB_500mA); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac); + int ret = 0; + u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) & + PCF50633_MBCC7_USB_MASK; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: - val->intval = mbc->usb_online; + val->intval = mbc->usb_online && + (usblim == PCF50633_MBCC7_USB_1000mA); break; default: ret = -EINVAL; @@ -337,6 +363,14 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev) mbc->usb.supplied_to = mbc->pcf->pdata->batteries; mbc->usb.num_supplicants = mbc->pcf->pdata->num_batteries; + mbc->ac.name = "ac"; + mbc->ac.type = POWER_SUPPLY_TYPE_MAINS; + mbc->ac.properties = power_props; + mbc->ac.num_properties = ARRAY_SIZE(power_props); + mbc->ac.get_property = ac_get_property; + mbc->ac.supplied_to = mbc->pcf->pdata->batteries; + mbc->ac.num_supplicants = mbc->pcf->pdata->num_batteries; + ret = power_supply_register(&pdev->dev, &mbc->adapter); if (ret) { dev_err(mbc->pcf->dev, "failed to register adapter\n"); @@ -352,6 +386,15 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev) return ret; } + ret = power_supply_register(&pdev->dev, &mbc->ac); + if (ret) { + dev_err(mbc->pcf->dev, "failed to register ac\n"); + power_supply_unregister(&mbc->adapter); + power_supply_unregister(&mbc->usb); + kfree(mbc); + return ret; + } + INIT_DELAYED_WORK(&mbc->charging_restart_work, pcf50633_mbc_charging_restart); @@ -379,6 +422,7 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev) power_supply_unregister(&mbc->usb); power_supply_unregister(&mbc->adapter); + power_supply_unregister(&mbc->ac); cancel_delayed_work_sync(&mbc->charging_restart_work); -- cgit v1.2.3 From 31b4ff06e01a9a98a8e6ae6e8c42213648eec1d1 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Thu, 5 Nov 2009 00:24:55 +0300 Subject: pcf50633: introduces battery charging current control Implement a new sysfs attribute to allow changing MBC charging limit on the fly independently of usb current limit. It also gets set automatically every time usb current limit is changed. Limiting charging current also prevents violating USB specification in the case when the whole device is shut down and usb current limit is reset to the factory default by the pcf50633 state transition. Signed-off-by: Balaji Rao Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 78 ++++++++++++++++++++++++++++++++++++--- include/linux/mfd/pcf50633/core.h | 7 ++++ 2 files changed, 80 insertions(+), 5 deletions(-) diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 48e92c020f4b..21b6e64e7805 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -48,16 +48,21 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) u8 bits; int charging_start = 1; u8 mbcs2, chgmod; + unsigned int mbcc5; - if (ma >= 1000) + if (ma >= 1000) { bits = PCF50633_MBCC7_USB_1000mA; - else if (ma >= 500) + ma = 1000; + } else if (ma >= 500) { bits = PCF50633_MBCC7_USB_500mA; - else if (ma >= 100) + ma = 500; + } else if (ma >= 100) { bits = PCF50633_MBCC7_USB_100mA; - else { + ma = 100; + } else { bits = PCF50633_MBCC7_USB_SUSPEND; charging_start = 0; + ma = 0; } ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, @@ -67,7 +72,24 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) else dev_info(pcf->dev, "usb curlim to %d mA\n", ma); - /* Manual charging start */ + /* + * We limit the charging current to be the USB current limit. + * The reason is that on pcf50633, when it enters PMU Standby mode, + * which it does when the device goes "off", the USB current limit + * reverts to the variant default. In at least one common case, that + * default is 500mA. By setting the charging current to be the same + * as the USB limit we set here before PMU standby, we enforce it only + * using the correct amount of current even when the USB current limit + * gets reset to the wrong thing + */ + + if (mbc->pcf->pdata->charger_reference_current_ma) { + mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma; + if (mbcc5 > 255) + mbcc5 = 255; + pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5); + } + mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); @@ -157,9 +179,55 @@ static ssize_t set_usblim(struct device *dev, static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim); +static ssize_t +show_chglim(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pcf50633_mbc *mbc = dev_get_drvdata(dev); + u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5); + unsigned int ma; + + if (!mbc->pcf->pdata->charger_reference_current_ma) + return -ENODEV; + + ma = (mbc->pcf->pdata->charger_reference_current_ma * mbcc5) >> 8; + + return sprintf(buf, "%u\n", ma); +} + +static ssize_t set_chglim(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct pcf50633_mbc *mbc = dev_get_drvdata(dev); + unsigned long ma; + unsigned int mbcc5; + int ret; + + if (!mbc->pcf->pdata->charger_reference_current_ma) + return -ENODEV; + + ret = strict_strtoul(buf, 10, &ma); + if (ret) + return -EINVAL; + + mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma; + if (mbcc5 > 255) + mbcc5 = 255; + pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5); + + return count; +} + +/* + * This attribute allows to change MBC charging limit on the fly + * independently of usb current limit. It also gets set automatically every + * time usb current limit is changed. + */ +static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim); + static struct attribute *pcf50633_mbc_sysfs_entries[] = { &dev_attr_chgmode.attr, &dev_attr_usb_curlim.attr, + &dev_attr_chg_curlim.attr, NULL, }; diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 9aba7b779fbc..09af8fdfbb5d 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -31,6 +31,13 @@ struct pcf50633_platform_data { int charging_restart_interval; + /* + * Should be set accordingly to the reference resistor used, see + * I_{ch(ref)} charger reference current in the pcf50633 User + * Manual. + */ + int charger_reference_current_ma; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v1.2.3 From e98c73a24f33d6f54402f5cef2e7bf282d1d1fcc Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 5 Nov 2009 00:24:57 +0300 Subject: pcf50633: Get rid of charging restart software auto-triggering After reaching Battery Full condition MBC state machine switches back into charging mode when the battery voltage falls below 96% of a battery float voltage. The voltage drop in Li-Ion batteries is marginal (1-2%) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 75-80%. That is a desired behaviour recommended by battery manufacturers, don't mess with it. Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 46 --------------------------------------- include/linux/mfd/pcf50633/core.h | 2 -- 2 files changed, 48 deletions(-) diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 21b6e64e7805..338311996eea 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -37,8 +37,6 @@ struct pcf50633_mbc { struct power_supply usb; struct power_supply adapter; struct power_supply ac; - - struct delayed_work charging_restart_work; }; int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) @@ -236,44 +234,10 @@ static struct attribute_group mbc_attr_group = { .attrs = pcf50633_mbc_sysfs_entries, }; -/* MBC state machine switches into charging mode when the battery voltage - * falls below 96% of a battery float voltage. But the voltage drop in Li-ion - * batteries is marginal(1~2 %) till about 80% of its capacity - which means, - * after a BATFULL, charging won't be restarted until 80%. - * - * This work_struct function restarts charging at regular intervals to make - * sure we don't discharge too much - */ - -static void pcf50633_mbc_charging_restart(struct work_struct *work) -{ - struct pcf50633_mbc *mbc; - u8 mbcs2, chgmod; - - mbc = container_of(work, struct pcf50633_mbc, - charging_restart_work.work); - - mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2); - chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); - - if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL) - return; - - /* Restart charging */ - pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1, - PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME); - mbc->usb_active = 1; - power_supply_changed(&mbc->usb); - - dev_info(mbc->pcf->dev, "Charging restarted\n"); -} - static void pcf50633_mbc_irq_handler(int irq, void *data) { struct pcf50633_mbc *mbc = data; - int chg_restart_interval = - mbc->pcf->pdata->charging_restart_interval; /* USB */ if (irq == PCF50633_IRQ_USBINS) { @@ -282,7 +246,6 @@ pcf50633_mbc_irq_handler(int irq, void *data) mbc->usb_online = 0; mbc->usb_active = 0; pcf50633_mbc_usb_curlim_set(mbc->pcf, 0); - cancel_delayed_work_sync(&mbc->charging_restart_work); } /* Adapter */ @@ -297,10 +260,6 @@ pcf50633_mbc_irq_handler(int irq, void *data) if (irq == PCF50633_IRQ_BATFULL) { mbc->usb_active = 0; mbc->adapter_active = 0; - - if (chg_restart_interval > 0) - schedule_delayed_work(&mbc->charging_restart_work, - chg_restart_interval); } else if (irq == PCF50633_IRQ_USBLIMON) mbc->usb_active = 0; else if (irq == PCF50633_IRQ_USBLIMOFF) @@ -463,9 +422,6 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev) return ret; } - INIT_DELAYED_WORK(&mbc->charging_restart_work, - pcf50633_mbc_charging_restart); - ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group); if (ret) dev_err(mbc->pcf->dev, "failed to create sysfs entries\n"); @@ -492,8 +448,6 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev) power_supply_unregister(&mbc->adapter); power_supply_unregister(&mbc->ac); - cancel_delayed_work_sync(&mbc->charging_restart_work); - kfree(mbc); return 0; diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 09af8fdfbb5d..46df7f053c29 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,8 +29,6 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; - int charging_restart_interval; - /* * Should be set accordingly to the reference resistor used, see * I_{ch(ref)} charger reference current in the pcf50633 User -- cgit v1.2.3 From 1282b35a1edf5f12ae58a2b16ae8615dfe0d9ecc Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 5 Nov 2009 00:24:58 +0300 Subject: pcf50633: Properly reenable charging when the supply conditions change If chgmod == BATFULL, setting chgena has no effect. Datasheet says we need to set resume instead but when autoresume is used resume doesn't work. Clear and set chgena instead. This enables a user to force charging by re-plugging USB even when the charger entered Battery Full mode, might be handy before a long trip. Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 338311996eea..47187337b96c 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -92,14 +92,18 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); /* If chgmod == BATFULL, setting chgena has no effect. - * We need to set resume instead. + * Datasheet says we need to set resume instead but when autoresume is + * used resume doesn't work. Clear and set chgena instead. */ if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL) pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); - else + else { + pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1, + PCF50633_MBCC1_CHGENA); pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, - PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME); + PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); + } mbc->usb_active = charging_start; -- cgit v1.2.3 From c329795052aa339850a45fab649ab97a36905136 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 5 Nov 2009 00:24:59 +0300 Subject: pcf50633: Query charger status directly Current scheme is fragile and is likely to go off sync, especially on batfull->adapter charging automatic MBC transition. Query the status bit every time we need it instead. We need to export another function to query for USB presence because we can't read anything from PCF50633 (via I2C) inside irq context and that is needed by usb gadgets. Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 50 +++++++++++++++++++++++----------------- include/linux/mfd/pcf50633/mbc.h | 1 + 2 files changed, 30 insertions(+), 21 deletions(-) diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 47187337b96c..b915a008f587 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -29,9 +29,7 @@ struct pcf50633_mbc { struct pcf50633 *pcf; - int adapter_active; int adapter_online; - int usb_active; int usb_online; struct power_supply usb; @@ -88,7 +86,7 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5); } - mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); + mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2); chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); /* If chgmod == BATFULL, setting chgena has no effect. @@ -105,8 +103,6 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); } - mbc->usb_active = charging_start; - power_supply_changed(&mbc->usb); return ret; @@ -117,20 +113,44 @@ int pcf50633_mbc_get_status(struct pcf50633 *pcf) { struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); int status = 0; + u8 chgmod; + + if (!mbc) + return 0; + + chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2) + & PCF50633_MBCS2_MBC_MASK; if (mbc->usb_online) status |= PCF50633_MBC_USB_ONLINE; - if (mbc->usb_active) + if (chgmod == PCF50633_MBCS2_MBC_USB_PRE || + chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT || + chgmod == PCF50633_MBCS2_MBC_USB_FAST || + chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT) status |= PCF50633_MBC_USB_ACTIVE; if (mbc->adapter_online) status |= PCF50633_MBC_ADAPTER_ONLINE; - if (mbc->adapter_active) + if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE || + chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT || + chgmod == PCF50633_MBCS2_MBC_ADP_FAST || + chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT) status |= PCF50633_MBC_ADAPTER_ACTIVE; return status; } EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status); +int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf) +{ + struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); + + if (!mbc) + return 0; + + return mbc->usb_online; +} +EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status); + static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr, char *buf) { @@ -248,26 +268,14 @@ pcf50633_mbc_irq_handler(int irq, void *data) mbc->usb_online = 1; } else if (irq == PCF50633_IRQ_USBREM) { mbc->usb_online = 0; - mbc->usb_active = 0; pcf50633_mbc_usb_curlim_set(mbc->pcf, 0); } /* Adapter */ - if (irq == PCF50633_IRQ_ADPINS) { + if (irq == PCF50633_IRQ_ADPINS) mbc->adapter_online = 1; - mbc->adapter_active = 1; - } else if (irq == PCF50633_IRQ_ADPREM) { + else if (irq == PCF50633_IRQ_ADPREM) mbc->adapter_online = 0; - mbc->adapter_active = 0; - } - - if (irq == PCF50633_IRQ_BATFULL) { - mbc->usb_active = 0; - mbc->adapter_active = 0; - } else if (irq == PCF50633_IRQ_USBLIMON) - mbc->usb_active = 0; - else if (irq == PCF50633_IRQ_USBLIMOFF) - mbc->usb_active = 1; power_supply_changed(&mbc->ac); power_supply_changed(&mbc->usb); diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 4119579acf2c..df4f5fa88de3 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,6 +128,7 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); +int pcf50633_mbc_get_usb_online_status(struct pcf50633 *); #endif -- cgit v1.2.3 From 2f745dde1f5659d8d6ff5b36996039b3f5a0a20a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 5 Nov 2009 00:24:56 +0300 Subject: gta02: Set pcf50633 charger_reference_current_ma This value is board-specific and is needed for calculations to set charging current limit properly. Signed-off-by: Lars-Peter Clausen Acked-by: Nelson Castillo Signed-off-by: Paul Fertser Cc: Russell King Cc: Ben Dooks Signed-off-by: Anton Vorontsov --- arch/arm/mach-s3c2442/mach-gta02.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index 0fb385bd9cd9..99d42446d0ff 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -268,6 +268,9 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .batteries = gta02_batteries, .num_batteries = ARRAY_SIZE(gta02_batteries), + + .charger_reference_current_ma = 1000, + .reg_init_data = { [PCF50633_REGULATOR_AUTO] = { .constraints = { -- cgit v1.2.3 From 0e19dbb73eab1f5de328e297b8b6d9887c3e73c2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 17 Nov 2009 15:44:54 +0000 Subject: wm831x_backup: Remove unused variables Signed-off-by: Alan Cox Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/wm831x_backup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c index f181076a4085..bf4f387a8009 100644 --- a/drivers/power/wm831x_backup.c +++ b/drivers/power/wm831x_backup.c @@ -164,7 +164,7 @@ static __devinit int wm831x_backup_probe(struct platform_device *pdev) struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); struct wm831x_backup *devdata; struct power_supply *backup; - int ret, irq, i; + int ret; devdata = kzalloc(sizeof(struct wm831x_backup), GFP_KERNEL); if (devdata == NULL) -- cgit v1.2.3 From 9d233e8bb92e355fd20b14745c1d9ff402e0e685 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Dec 2009 00:24:51 +0300 Subject: power_supply_sysfs: Handle -ENODATA in a special way There are cases when some device can not report any meaningful value, e.g. TWL4030 charger can report voltage only when charging is active. In these cases drivers will return -ENODATA, and we shouldn't flood kernel log with error messages. Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_sysfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 08144393d64b..c790e0c77d4b 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -65,7 +65,10 @@ static ssize_t power_supply_show_property(struct device *dev, ret = psy->get_property(psy, off, &value); if (ret < 0) { - if (ret != -ENODEV) + if (ret == -ENODATA) + dev_dbg(dev, "driver has no data for `%s' property\n", + attr->attr.name); + else if (ret != -ENODEV) dev_err(dev, "driver failed to report `%s' property\n", attr->attr.name); return ret; -- cgit v1.2.3