From e73694d871867cae8471d2350ce89acb38bc2b63 Mon Sep 17 00:00:00 2001 From: Nikesh Oswal Date: Wed, 23 Dec 2015 14:18:05 +0000 Subject: ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as we test for a multiple of 8kHz. This patch fixes this issue by testing for multiples of 4kHz instead. Signed-off-by: Nikesh Oswal Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/arizona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index 9929efc6b9aa..5070a976adaa 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -1543,7 +1543,7 @@ static int arizona_hw_params(struct snd_pcm_substream *substream, bool reconfig; unsigned int aif_tx_state, aif_rx_state; - if (params_rate(params) % 8000) + if (params_rate(params) % 4000) rates = &arizona_44k1_bclk_rates[0]; else rates = &arizona_48k_bclk_rates[0]; -- cgit v1.2.3 From 3694cb2947db50753caf432db067487eafae7b9b Mon Sep 17 00:00:00 2001 From: Kailang Date: Mon, 28 Dec 2015 11:35:24 +0800 Subject: ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO The Lenovo ThinkCenter AIO uses Line2 (NID 0x1b) to implement the micmute hotkey, here we register an input device and use Line2 unsol event to collect the hotkey pressing or releasing. In the meanwhile, the micmute led is controlled by GPIO2, so we use an existing function alc_fixup_gpio_mic_mute_hook() to control the led. [Hui: And there are two places to register the input device, to make the code simple and clean, move the two same code sections into a function.] Cc: Signed-off-by: Kailang Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 84 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 71 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fe96428aa403..257b839ea94d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3468,6 +3468,29 @@ static void gpio2_mic_hotkey_event(struct hda_codec *codec, input_sync(spec->kb_dev); } +static int alc_register_micmute_input_device(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->kb_dev = input_allocate_device(); + if (!spec->kb_dev) { + codec_err(codec, "Out of memory (input_allocate_device)\n"); + return -ENOMEM; + } + spec->kb_dev->name = "Microphone Mute Button"; + spec->kb_dev->evbit[0] = BIT_MASK(EV_KEY); + spec->kb_dev->keybit[BIT_WORD(KEY_MICMUTE)] = BIT_MASK(KEY_MICMUTE); + + if (input_register_device(spec->kb_dev)) { + codec_err(codec, "input_register_device failed\n"); + input_free_device(spec->kb_dev); + spec->kb_dev = NULL; + return -ENOMEM; + } + + return 0; +} + static void alc280_fixup_hp_gpio2_mic_hotkey(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -3485,20 +3508,8 @@ static void alc280_fixup_hp_gpio2_mic_hotkey(struct hda_codec *codec, struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->kb_dev = input_allocate_device(); - if (!spec->kb_dev) { - codec_err(codec, "Out of memory (input_allocate_device)\n"); + if (alc_register_micmute_input_device(codec) != 0) return; - } - spec->kb_dev->name = "Microphone Mute Button"; - spec->kb_dev->evbit[0] = BIT_MASK(EV_KEY); - spec->kb_dev->keybit[BIT_WORD(KEY_MICMUTE)] = BIT_MASK(KEY_MICMUTE); - if (input_register_device(spec->kb_dev)) { - codec_err(codec, "input_register_device failed\n"); - input_free_device(spec->kb_dev); - spec->kb_dev = NULL; - return; - } snd_hda_add_verbs(codec, gpio_init); snd_hda_codec_write_cache(codec, codec->core.afg, 0, @@ -3528,6 +3539,47 @@ static void alc280_fixup_hp_gpio2_mic_hotkey(struct hda_codec *codec, } } +static void alc233_fixup_lenovo_line2_mic_hotkey(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + /* Line2 = mic mute hotkey + GPIO2 = mic mute LED */ + static const struct hda_verb gpio_init[] = { + { 0x01, AC_VERB_SET_GPIO_MASK, 0x04 }, + { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x04 }, + {} + }; + + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + if (alc_register_micmute_input_device(codec) != 0) + return; + + snd_hda_add_verbs(codec, gpio_init); + snd_hda_jack_detect_enable_callback(codec, 0x1b, + gpio2_mic_hotkey_event); + + spec->gen.cap_sync_hook = alc_fixup_gpio_mic_mute_hook; + spec->gpio_led = 0; + spec->mute_led_polarity = 0; + spec->gpio_mic_led_mask = 0x04; + return; + } + + if (!spec->kb_dev) + return; + + switch (action) { + case HDA_FIXUP_ACT_PROBE: + spec->init_amp = ALC_INIT_DEFAULT; + break; + case HDA_FIXUP_ACT_FREE: + input_unregister_device(spec->kb_dev); + spec->kb_dev = NULL; + } +} + static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -4628,6 +4680,7 @@ enum { ALC275_FIXUP_DELL_XPS, ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE, ALC293_FIXUP_LENOVO_SPK_NOISE, + ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY, }; static const struct hda_fixup alc269_fixups[] = { @@ -5237,6 +5290,10 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_THINKPAD_ACPI }, + [ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc233_fixup_lenovo_line2_mic_hotkey, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -5386,6 +5443,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE), + SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP), SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- cgit v1.2.3 From c7b60a89516beb20a352ec85c73a8fccd5becf26 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Mon, 28 Dec 2015 11:35:25 +0800 Subject: ALSA: hda - Add keycode map for alc input device Then users can remap the keycode from userspace. If without the remap, the input device will pass KEY_MICMUTE to userspace, but in X11 layer, it uses KEY_F20 rather than KEY_MICMUTE for XF86AudioMicMute. After adding the keycode map, users can remap the keycode to any value users want. Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 257b839ea94d..3a89d82f8057 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -67,6 +67,10 @@ enum { ALC_HEADSET_TYPE_OMTP, }; +enum { + ALC_KEY_MICMUTE_INDEX, +}; + struct alc_customize_define { unsigned int sku_cfg; unsigned char port_connectivity; @@ -123,6 +127,7 @@ struct alc_spec { unsigned int pll_coef_idx, pll_coef_bit; unsigned int coef0; struct input_dev *kb_dev; + u8 alc_mute_keycode_map[1]; }; /* @@ -3462,24 +3467,32 @@ static void gpio2_mic_hotkey_event(struct hda_codec *codec, /* GPIO2 just toggles on a keypress/keyrelease cycle. Therefore send both key on and key off event for every interrupt. */ - input_report_key(spec->kb_dev, KEY_MICMUTE, 1); + input_report_key(spec->kb_dev, spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX], 1); input_sync(spec->kb_dev); - input_report_key(spec->kb_dev, KEY_MICMUTE, 0); + input_report_key(spec->kb_dev, spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX], 0); input_sync(spec->kb_dev); } static int alc_register_micmute_input_device(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; + int i; spec->kb_dev = input_allocate_device(); if (!spec->kb_dev) { codec_err(codec, "Out of memory (input_allocate_device)\n"); return -ENOMEM; } + + spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX] = KEY_MICMUTE; + spec->kb_dev->name = "Microphone Mute Button"; spec->kb_dev->evbit[0] = BIT_MASK(EV_KEY); - spec->kb_dev->keybit[BIT_WORD(KEY_MICMUTE)] = BIT_MASK(KEY_MICMUTE); + spec->kb_dev->keycodesize = sizeof(spec->alc_mute_keycode_map[0]); + spec->kb_dev->keycodemax = ARRAY_SIZE(spec->alc_mute_keycode_map); + spec->kb_dev->keycode = spec->alc_mute_keycode_map; + for (i = 0; i < ARRAY_SIZE(spec->alc_mute_keycode_map); i++) + set_bit(spec->alc_mute_keycode_map[i], spec->kb_dev->keybit); if (input_register_device(spec->kb_dev)) { codec_err(codec, "input_register_device failed\n"); -- cgit v1.2.3 From ca8457bb02d8ecddf7f49ab874127dd4df782b16 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Wed, 30 Dec 2015 15:33:21 +0800 Subject: ASoC: rt5645: add sys clk detection Add system clock detection to prevent output DC from SPO. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 4 ++++ sound/soc/codecs/rt5645.h | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 28132375e427..61bbeac0c117 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -1646,9 +1646,13 @@ static int rt5645_spk_event(struct snd_soc_dapm_widget *w, RT5645_PWR_CLS_D_L, RT5645_PWR_CLS_D | RT5645_PWR_CLS_D_R | RT5645_PWR_CLS_D_L); + snd_soc_update_bits(codec, RT5645_GEN_CTRL3, + RT5645_DET_CLK_MASK, RT5645_DET_CLK_MODE1); break; case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, RT5645_GEN_CTRL3, + RT5645_DET_CLK_MASK, RT5645_DET_CLK_DIS); snd_soc_write(codec, RT5645_EQ_CTRL2, 0); snd_soc_update_bits(codec, RT5645_PWR_DIG1, RT5645_PWR_CLS_D | RT5645_PWR_CLS_D_R | diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index 093e46d559fb..205e0715c99a 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -2122,6 +2122,10 @@ enum { /* General Control3 (0xfc) */ #define RT5645_JD_PSV_MODE (0x1 << 12) #define RT5645_IRQ_CLK_GATE_CTRL (0x1 << 11) +#define RT5645_DET_CLK_MASK (0x3 << 9) +#define RT5645_DET_CLK_DIS (0x0 << 9) +#define RT5645_DET_CLK_MODE1 (0x1 << 9) +#define RT5645_DET_CLK_MODE2 (0x2 << 9) #define RT5645_MICINDET_MANU (0x1 << 7) #define RT5645_RING2_SLEEVE_GND (0x1 << 5) -- cgit v1.2.3 From 783513eec3209542fcd6ac0cbcb030b3c17a4827 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 29 Dec 2015 16:25:13 +0000 Subject: ASoC: Use nested lock for snd_soc_dapm_mutex_lock snd_soc_dapm_mutex_lock currently uses the un-nested call which can cause lockdep warnings when called from control handlers (a relatively common usage) and using modules. As creating the control causes a potential mutex inversion with the handler, creating the control will take the controls_rwsem under the dapm_mutex and accessing the control will take the dapm_mutex under controls_rwsem. All the users look like they want to be using the runtime class of the lock anyway, so this patch just changes snd_soc_dapm_mutex_lock to use the nested call, with the SND_SOC_DAPM_CLASS_RUNTIME class. Fixes: f6d5e586b416 ("ASoC: dapm: Add helpers to lock/unlock DAPM mutex") Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/sound/soc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index a8b4b9c8b1d2..fb955e69a78e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1655,7 +1655,7 @@ extern const struct dev_pm_ops snd_soc_pm_ops; /* Helper functions */ static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm) { - mutex_lock(&dapm->card->dapm_mutex); + mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); } static inline void snd_soc_dapm_mutex_unlock(struct snd_soc_dapm_context *dapm) -- cgit v1.2.3 From fb203adc28a3717c252bde0f068b3ebd2206994b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 5 Jan 2016 17:16:03 +0530 Subject: ASoC: Intel: Skylake: Revert previous broken fix memory leak fix This reverts commit 87b5ed8ecb9fe05a696e1c0b53c7a49ea66432c1 ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[] [] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [] string.isra.4+0x3b/0xd0 [ 66.939793] [] vsnprintf+0x116/0x540 [ 66.945742] [] kvasprintf+0x40/0x80 [ 66.951591] [] kasprintf+0x40/0x50 [ 66.957359] [] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [] ? mutex_unlock+0x9/0x10 [ 67.022405] [] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [] ? debug_mutex_init+0x32/0x40 [ 67.037973] [] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index ffea427aeca8..a7854c8fc523 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1240,7 +1240,6 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus) */ ret = snd_soc_tplg_component_load(&platform->component, &skl_tplg_ops, fw, 0); - release_firmware(fw); if (ret < 0) { dev_err(bus->dev, "tplg component load failed%d\n", ret); return -EINVAL; -- cgit v1.2.3 From d8018361b58bb7b9a2a657104e54c33c2ef1439d Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 5 Jan 2016 17:16:04 +0530 Subject: ASoC: Intel: Skylake: Fix the memory leak This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 2 ++ sound/soc/intel/skylake/skl.c | 4 ++++ sound/soc/intel/skylake/skl.h | 2 ++ 3 files changed, 8 insertions(+) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index a7854c8fc523..ad4d0f82603e 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1248,5 +1248,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus) skl->resource.max_mcps = SKL_MAX_MCPS; skl->resource.max_mem = SKL_FW_MAX_MEM; + skl->tplg = fw; + return 0; } diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 5319529aedf7..caa69c4598a6 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include "skl.h" @@ -520,6 +521,9 @@ static void skl_remove(struct pci_dev *pci) struct hdac_ext_bus *ebus = pci_get_drvdata(pci); struct skl *skl = ebus_to_skl(ebus); + if (skl->tplg) + release_firmware(skl->tplg); + if (pci_dev_run_wake(pci)) pm_runtime_get_noresume(&pci->dev); pci_dev_put(pci); diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index dd2e79ae45a8..a0709e344d44 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -68,6 +68,8 @@ struct skl { struct skl_dsp_resource resource; struct list_head ppl_list; struct list_head dapm_path_list; + + const struct firmware *tplg; }; #define skl_to_ebus(s) (&(s)->ebus) -- cgit v1.2.3