From ef2e3ec520a8c20661ca4e7d17a5c7110d3a7828 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Thu, 4 Jun 2020 12:07:45 +0200 Subject: scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request The qla2xxx driver knows when request was processed successfully or not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The upper layer needs to figure out from the rcv_rsplen and transferred_length variables if the request was transferred successfully. This is not always possible, e.g. when the request data length is 0, the transferred_length is also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's inform the upper layer (nvme_fc_fcpio_done()) when something went wrong. nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an error which aligns it with the lpfc driver. Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.de Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Daniel Wagner Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_nvme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index d66d47a0f958..fa695a4007f8 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -139,11 +139,12 @@ static void qla_nvme_release_fcp_cmd_kref(struct kref *kref) sp->priv = NULL; if (priv->comp_status == QLA_SUCCESS) { fd->rcv_rsplen = le16_to_cpu(nvme->u.nvme.rsp_pyld_len); + fd->status = NVME_SC_SUCCESS; } else { fd->rcv_rsplen = 0; fd->transferred_length = 0; + fd->status = NVME_SC_INTERNAL; } - fd->status = 0; spin_unlock_irqrestore(&priv->cmd_lock, flags); fd->done(fd); -- cgit v1.2.3 From 632f24f09d5b7c8a2f94932c3391ca957ae76cc4 Mon Sep 17 00:00:00 2001 From: Roman Bolshakov Date: Fri, 5 Jun 2020 17:44:37 +0300 Subject: scsi: qla2xxx: Keep initiator ports after RSCN The driver performs SCR (state change registration) in all modes including pure target mode. For each RSCN, scan_needed flag is set in qla2x00_handle_rscn() for the port mentioned in the RSCN and fabric rescan is scheduled. During the rescan, GNN_FT handler, qla24xx_async_gnnft_done() deletes session of the port that caused the RSCN. In target mode, the session deletion has an impact on ATIO handler, qlt_24xx_atio_pkt(). Target responds with SAM STATUS BUSY to I/O incoming from the deleted session. qlt_handle_cmd_for_atio() and qlt_handle_task_mgmt() return -EFAULT if they are not able to find session of the command/TMF, and that results in invocation of qlt_send_busy(): qlt_24xx_atio_pkt_all_vps: qla_target(0): type 6 ox_id 0014 qla_target(0): Unable to send command to target, sending BUSY status Such response causes command timeout on the initiator. Error handler thread on the initiator will be spawned to abort the commands: scsi 23:0:0:0: tag#0 abort scheduled scsi 23:0:0:0: tag#0 aborting command qla2xxx [0000:af:00.0]-188c:23: Entered qla24xx_abort_command. qla2xxx [0000:af:00.0]-801c:23: Abort command issued nexus=23:0:0 -- 0 2003. Command abort is rejected by target and fails (2003), error handler then tries to perform DEVICE RESET and TARGET RESET but they're also doomed to fail because TMFs are ignored for the deleted sessions. Then initiator makes BUS RESET that resets the link via qla2x00_full_login_lip(). BUS RESET succeeds and brings initiator port up, SAN switch detects that and sends RSCN to the target port and it fails again the same way as described above. It never goes out of the loop. The change breaks the RSCN loop by keeping initiator sessions mentioned in RSCN payload in all modes, including dual and pure target mode. Link: https://lore.kernel.org/r/20200605144435.27023-1-r.bolshakov@yadro.com Fixes: 2037ce49d30a ("scsi: qla2xxx: Fix stale session") Cc: Quinn Tran Cc: Arun Easi Cc: Nilesh Javali Cc: Bart Van Assche Cc: Daniel Wagner Cc: Himanshu Madhani Cc: Martin Wilck Cc: stable@vger.kernel.org # v5.4+ Reviewed-by: Daniel Wagner Reviewed-by: Shyam Sundar Reviewed-by: Himanshu Madhani Signed-off-by: Roman Bolshakov Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_gs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 42c3ad27f1cb..df670fba2ab8 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3496,7 +3496,9 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) qla2x00_clear_loop_id(fcport); fcport->flags |= FCF_FABRIC_DEVICE; } else if (fcport->d_id.b24 != rp->id.b24 || - fcport->scan_needed) { + (fcport->scan_needed && + fcport->port_type != FCT_INITIATOR && + fcport->port_type != FCT_NVME_INITIATOR)) { qlt_schedule_sess_for_deletion(fcport); } fcport->d_id.b24 = rp->id.b24; -- cgit v1.2.3 From aad4b4d15f30de087c5972cfb767fadb5dbc3c52 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 20 Jun 2020 09:13:02 +0200 Subject: scsi: libata: Fix the ata_scsi_dma_need_drain stub We not only need the stub when libata is disabled, but also if it is modular and there are built-in SAS drivers (which can happen when SCSI_SAS_ATA is disabled). Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers") Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 042e584daca7..c57bf6749681 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1092,7 +1092,7 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, #define ATA_SCSI_COMPAT_IOCTL /* empty */ #endif extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); -#if IS_ENABLED(CONFIG_ATA) +#if IS_REACHABLE(CONFIG_ATA) bool ata_scsi_dma_need_drain(struct request *rq); #else #define ata_scsi_dma_need_drain NULL -- cgit v1.2.3 From 46da547e21d6cefceec3fb3dba5ebbca056627fc Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 23 Jun 2020 10:41:22 +0200 Subject: scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() Commit cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") has introduced static checker warnings for potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has tried to fix it. However, yet another potential null dereference is remaining. This commit fixes it. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com Fixes: 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset") Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") Reviewed-by: James Smart Signed-off-by: SeongJae Park Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 69a5249e007a..6637f84a3d1b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -11878,7 +11878,8 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) lpfc_sli4_xri_exchange_busy_wait(phba); /* per-phba callback de-registration for hotplug event */ - lpfc_cpuhp_remove(phba); + if (phba->pport) + lpfc_cpuhp_remove(phba); /* Disable PCI subsystem interrupt */ lpfc_sli4_disable_intr(phba); -- cgit v1.2.3 From 936e6b85da0476dd2edac7c51c68072da9fb4ba2 Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Tue, 23 Jun 2020 16:02:42 +0200 Subject: scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: #4.15+ Reviewed-by: Julian Wiedmann Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen --- drivers/s390/scsi/zfcp_erp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index db320dab1fee..79f6e8fb03ca 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -577,7 +577,10 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_dbf_rec_run("erscf_1", act); - req->erp_action = NULL; + /* lock-free concurrent access with + * zfcp_erp_timeout_handler() + */ + WRITE_ONCE(req->erp_action, NULL); } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_dbf_rec_run("erscf_2", act); @@ -613,8 +616,14 @@ void zfcp_erp_notify(struct zfcp_erp_action *erp_action, unsigned long set_mask) void zfcp_erp_timeout_handler(struct timer_list *t) { struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer); - struct zfcp_erp_action *act = fsf_req->erp_action; + struct zfcp_erp_action *act; + if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) + return; + /* lock-free concurrent access with zfcp_erp_strategy_check_fsfreq() */ + act = READ_ONCE(fsf_req->erp_action); + if (!act) + return; zfcp_erp_notify(act, ZFCP_STATUS_ERP_TIMEDOUT); } -- cgit v1.2.3 From afe89f115e84edbc76d316759e206580a06c6973 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Tue, 16 Jun 2020 17:04:46 +0200 Subject: scsi: mptscsih: Fix read sense data size The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.com Co-developed-by: Stanislav Saner Signed-off-by: Stanislav Saner Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen --- drivers/message/fusion/mptscsih.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index f0737c57ed5f..1491561d2e5c 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -118,8 +118,6 @@ int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); int mptscsih_resume(struct pci_dev *pdev); #endif -#define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -2422,7 +2420,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /* Copy the sense received into the scsi command block. */ req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); - memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc)); + memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC); /* Log SMART data (asc = 0x5D, non-IM case only) if required. */ -- cgit v1.2.3