From 4cc8a57425c623753b10b77b15392e5b83baa5a3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:16 +0100 Subject: Revert "dell-laptop: Remove rfkill code" Without rfkill functionality in dell-laptop I have the following problems: -If the hardware radio switch is set to disable the radio, then userspace will still think it can use wireless and bluetooth. -The wwan / 3g modem cannot be soft blocked without the dell-laptop rfkill functionality I know the rfkill functionality was removed from the dell-laptop driver because it caused more problems then it fixed, and the blacklist for it was growing out of control. But in the thread discussing this Dell mentioned that they only QA the rfkill acpi interface on Latitudes and indeed there have been no blacklist entries for Latitudes. Therefor I would like to bring the rfkill functionality back only for Latitudes. This patch is a straight-forward revert. The next patch in this set will drop the blacklist and replace it with a Latitude check. This reverts commit a6c2390cd6d2083d27a2359658e08f2d3df375ac. Conflicts: drivers/platform/x86/dell-laptop.c Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 289 +++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bb77e18b3dd4..55f75a2d5168 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -89,6 +90,9 @@ static struct platform_driver platform_driver = { static struct platform_device *platform_device; static struct backlight_device *dell_backlight_device; +static struct rfkill *wifi_rfkill; +static struct rfkill *bluetooth_rfkill; +static struct rfkill *wwan_rfkill; static const struct dmi_system_id dell_device_table[] __initconst = { { @@ -115,6 +119,53 @@ static const struct dmi_system_id dell_device_table[] __initconst = { }; MODULE_DEVICE_TABLE(dmi, dell_device_table); +static struct dmi_system_id dell_blacklist[] = { + /* Supported by compal-laptop */ + { + .ident = "Dell Mini 9", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"), + }, + }, + { + .ident = "Dell Mini 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"), + }, + }, + { + .ident = "Dell Mini 10v", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"), + }, + }, + { + .ident = "Dell Mini 1012", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), + }, + }, + { + .ident = "Dell Inspiron 11z", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"), + }, + }, + { + .ident = "Dell Mini 12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"), + }, + }, + {} +}; + static struct dmi_system_id dell_quirks[] = { { .callback = dmi_matched, @@ -355,6 +406,94 @@ dell_send_request(struct calling_interface_buffer *buffer, int class, return buffer; } +/* Derived from information in DellWirelessCtl.cpp: + Class 17, select 11 is radio control. It returns an array of 32-bit values. + + Input byte 0 = 0: Wireless information + + result[0]: return code + result[1]: + Bit 0: Hardware switch supported + Bit 1: Wifi locator supported + Bit 2: Wifi is supported + Bit 3: Bluetooth is supported + Bit 4: WWAN is supported + Bit 5: Wireless keyboard supported + Bits 6-7: Reserved + Bit 8: Wifi is installed + Bit 9: Bluetooth is installed + Bit 10: WWAN is installed + Bits 11-15: Reserved + Bit 16: Hardware switch is on + Bit 17: Wifi is blocked + Bit 18: Bluetooth is blocked + Bit 19: WWAN is blocked + Bits 20-31: Reserved + result[2]: NVRAM size in bytes + result[3]: NVRAM format version number + + Input byte 0 = 2: Wireless switch configuration + result[0]: return code + result[1]: + Bit 0: Wifi controlled by switch + Bit 1: Bluetooth controlled by switch + Bit 2: WWAN controlled by switch + Bits 3-6: Reserved + Bit 7: Wireless switch config locked + Bit 8: Wifi locator enabled + Bits 9-14: Reserved + Bit 15: Wifi locator setting locked + Bits 16-31: Reserved +*/ + +static int dell_rfkill_set(void *data, bool blocked) +{ + int disable = blocked ? 1 : 0; + unsigned long radio = (unsigned long)data; + int hwswitch_bit = (unsigned long)data - 1; + int ret = 0; + + get_buffer(); + dell_send_request(buffer, 17, 11); + + /* If the hardware switch controls this radio, and the hardware + switch is disabled, don't allow changing the software state */ + if ((hwswitch_state & BIT(hwswitch_bit)) && + !(buffer->output[1] & BIT(16))) { + ret = -EINVAL; + goto out; + } + + buffer->input[0] = (1 | (radio<<8) | (disable << 16)); + dell_send_request(buffer, 17, 11); + +out: + release_buffer(); + return ret; +} + +static void dell_rfkill_query(struct rfkill *rfkill, void *data) +{ + int status; + int bit = (unsigned long)data + 16; + int hwswitch_bit = (unsigned long)data - 1; + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + release_buffer(); + + rfkill_set_sw_state(rfkill, !!(status & BIT(bit))); + + if (hwswitch_state & (BIT(hwswitch_bit))) + rfkill_set_hw_state(rfkill, !(status & BIT(16))); +} + +static const struct rfkill_ops dell_rfkill_ops = { + .set_block = dell_rfkill_set, + .query = dell_rfkill_query, +}; + static struct dentry *dell_laptop_dir; static int dell_debugfs_show(struct seq_file *s, void *data) @@ -424,6 +563,108 @@ static const struct file_operations dell_debugfs_fops = { .release = single_release, }; +static void dell_update_rfkill(struct work_struct *ignored) +{ + if (wifi_rfkill) + dell_rfkill_query(wifi_rfkill, (void *)1); + if (bluetooth_rfkill) + dell_rfkill_query(bluetooth_rfkill, (void *)2); + if (wwan_rfkill) + dell_rfkill_query(wwan_rfkill, (void *)3); +} +static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); + + +static int __init dell_setup_rfkill(void) +{ + int status; + int ret; + + if (dmi_check_system(dell_blacklist)) { + pr_info("Blacklisted hardware detected - not enabling rfkill\n"); + return 0; + } + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + buffer->input[0] = 0x2; + dell_send_request(buffer, 17, 11); + hwswitch_state = buffer->output[1]; + release_buffer(); + + if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { + wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev, + RFKILL_TYPE_WLAN, + &dell_rfkill_ops, (void *) 1); + if (!wifi_rfkill) { + ret = -ENOMEM; + goto err_wifi; + } + ret = rfkill_register(wifi_rfkill); + if (ret) + goto err_wifi; + } + + if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { + bluetooth_rfkill = rfkill_alloc("dell-bluetooth", + &platform_device->dev, + RFKILL_TYPE_BLUETOOTH, + &dell_rfkill_ops, (void *) 2); + if (!bluetooth_rfkill) { + ret = -ENOMEM; + goto err_bluetooth; + } + ret = rfkill_register(bluetooth_rfkill); + if (ret) + goto err_bluetooth; + } + + if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { + wwan_rfkill = rfkill_alloc("dell-wwan", + &platform_device->dev, + RFKILL_TYPE_WWAN, + &dell_rfkill_ops, (void *) 3); + if (!wwan_rfkill) { + ret = -ENOMEM; + goto err_wwan; + } + ret = rfkill_register(wwan_rfkill); + if (ret) + goto err_wwan; + } + + return 0; +err_wwan: + rfkill_destroy(wwan_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); +err_bluetooth: + rfkill_destroy(bluetooth_rfkill); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); +err_wifi: + rfkill_destroy(wifi_rfkill); + + return ret; +} + +static void dell_cleanup_rfkill(void) +{ + if (wifi_rfkill) { + rfkill_unregister(wifi_rfkill); + rfkill_destroy(wifi_rfkill); + } + if (bluetooth_rfkill) { + rfkill_unregister(bluetooth_rfkill); + rfkill_destroy(bluetooth_rfkill); + } + if (wwan_rfkill) { + rfkill_unregister(wwan_rfkill); + rfkill_destroy(wwan_rfkill); + } +} + static int dell_send_intensity(struct backlight_device *bd) { int ret = 0; @@ -515,6 +756,30 @@ static void touchpad_led_exit(void) led_classdev_unregister(&touchpad_led); } +static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str, + struct serio *port) +{ + static bool extended; + + if (str & 0x20) + return false; + + if (unlikely(data == 0xe0)) { + extended = true; + return false; + } else if (unlikely(extended)) { + switch (data) { + case 0x8: + schedule_delayed_work(&dell_rfkill_work, + round_jiffies_relative(HZ)); + break; + } + extended = false; + } + + return false; +} + static int __init dell_init(void) { int max_intensity = 0; @@ -557,10 +822,26 @@ static int __init dell_init(void) } buffer = page_address(bufferpage); + ret = dell_setup_rfkill(); + + if (ret) { + pr_warn("Unable to setup rfkill\n"); + goto fail_rfkill; + } + + ret = i8042_install_filter(dell_laptop_i8042_filter); + if (ret) { + pr_warn("Unable to install key filter\n"); + goto fail_filter; + } + if (quirks && quirks->touchpad_led) touchpad_led_init(&platform_device->dev); dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL); + if (dell_laptop_dir != NULL) + debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL, + &dell_debugfs_fops); #ifdef CONFIG_ACPI /* In the event of an ACPI backlight being available, don't @@ -603,6 +884,11 @@ static int __init dell_init(void) return 0; fail_backlight: + i8042_remove_filter(dell_laptop_i8042_filter); + cancel_delayed_work_sync(&dell_rfkill_work); +fail_filter: + dell_cleanup_rfkill(); +fail_rfkill: free_page((unsigned long)bufferpage); fail_buffer: platform_device_del(platform_device); @@ -620,7 +906,10 @@ static void __exit dell_exit(void) debugfs_remove_recursive(dell_laptop_dir); if (quirks && quirks->touchpad_led) touchpad_led_exit(); + i8042_remove_filter(dell_laptop_i8042_filter); + cancel_delayed_work_sync(&dell_rfkill_work); backlight_device_unregister(dell_backlight_device); + dell_cleanup_rfkill(); if (platform_device) { platform_device_unregister(platform_device); platform_driver_unregister(&platform_driver); -- cgit v1.2.3 From 2a92551845bbbc8421ba908cd14bbdf065e0f454 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:17 +0100 Subject: dell-laptop: Only enable rfkill on Latitudes The rfkill functionality was removed from the dell-laptop driver because it was causing problems on various non Latitude models, and the blacklist kept growing and growing. In the thread discussing this Dell mentioned that they only QA the rfkill acpi interface on Latitudes and indeed there have been no blacklist entries for Latitudes. Note that the blacklist contained no Vostros either, and most Vostros have a hardware switch too, so we could consider supporting Vostros with a hardware switch too. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 57 +++++--------------------------------- 1 file changed, 7 insertions(+), 50 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 55f75a2d5168..bae932b60bab 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -119,53 +119,6 @@ static const struct dmi_system_id dell_device_table[] __initconst = { }; MODULE_DEVICE_TABLE(dmi, dell_device_table); -static struct dmi_system_id dell_blacklist[] = { - /* Supported by compal-laptop */ - { - .ident = "Dell Mini 9", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"), - }, - }, - { - .ident = "Dell Mini 10", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"), - }, - }, - { - .ident = "Dell Mini 10v", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"), - }, - }, - { - .ident = "Dell Mini 1012", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), - }, - }, - { - .ident = "Dell Inspiron 11z", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"), - }, - }, - { - .ident = "Dell Mini 12", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"), - }, - }, - {} -}; - static struct dmi_system_id dell_quirks[] = { { .callback = dmi_matched, @@ -579,11 +532,15 @@ static int __init dell_setup_rfkill(void) { int status; int ret; + const char *product; - if (dmi_check_system(dell_blacklist)) { - pr_info("Blacklisted hardware detected - not enabling rfkill\n"); + /* + * rfkill causes trouble on various non Latitudes, according to Dell + * actually testing the rfkill functionality is only done on Latitudes. + */ + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product || strncmp(product, "Latitude", 8)) return 0; - } get_buffer(); dell_send_request(buffer, 17, 11); -- cgit v1.2.3 From ddde708217af6d5fe43c0086247c05ed317076b4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:18 +0100 Subject: dell-laptop: If there is no hwswitch, then clear all hw-controlled bits To ensure we don't enter any hw-switch related code paths on machines without a hw-switch. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bae932b60bab..48fabf6b6ecb 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -548,6 +548,9 @@ static int __init dell_setup_rfkill(void) buffer->input[0] = 0x2; dell_send_request(buffer, 17, 11); hwswitch_state = buffer->output[1]; + /* If there is no hwswitch, then clear all hw-controlled bits */ + if (!(status & BIT(0))) + hwswitch_state &= ~7; release_buffer(); if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { -- cgit v1.2.3 From d038880efd9dd222c67fd31fbfca3440d0db3a06 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:19 +0100 Subject: dell-laptop: Only get status from BIOS once when updating Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 48fabf6b6ecb..06f281bf7790 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -425,21 +425,24 @@ out: return ret; } +static void dell_rfkill_update(struct rfkill *rfkill, int radio, int status) +{ + rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + + if (hwswitch_state & (BIT(radio - 1))) + rfkill_set_hw_state(rfkill, !(status & BIT(16))); +} + static void dell_rfkill_query(struct rfkill *rfkill, void *data) { int status; - int bit = (unsigned long)data + 16; - int hwswitch_bit = (unsigned long)data - 1; get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; release_buffer(); - rfkill_set_sw_state(rfkill, !!(status & BIT(bit))); - - if (hwswitch_state & (BIT(hwswitch_bit))) - rfkill_set_hw_state(rfkill, !(status & BIT(16))); + dell_rfkill_update(rfkill, (unsigned long)data, status); } static const struct rfkill_ops dell_rfkill_ops = { @@ -518,12 +521,19 @@ static const struct file_operations dell_debugfs_fops = { static void dell_update_rfkill(struct work_struct *ignored) { + int status; + + get_buffer(); + dell_send_request(buffer, 17, 11); + status = buffer->output[1]; + release_buffer(); + if (wifi_rfkill) - dell_rfkill_query(wifi_rfkill, (void *)1); + dell_rfkill_update(wifi_rfkill, 1, status); if (bluetooth_rfkill) - dell_rfkill_query(bluetooth_rfkill, (void *)2); + dell_rfkill_update(bluetooth_rfkill, 2, status); if (wwan_rfkill) - dell_rfkill_query(wwan_rfkill, (void *)3); + dell_rfkill_update(wwan_rfkill, 3, status); } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); -- cgit v1.2.3 From 33f9359abb9f6ded3e7b6dc98b1468c83404af49 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:20 +0100 Subject: dell-laptop: Don't set sw_state from the query callback The query callback should only update the hw_state, see the comment in net/rfkill/core.c in rfkill_set_block, which is its only caller. rfkill_set_block will modify the sw_state directly after calling query so calling set_sw_state is an expensive NOP. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 06f281bf7790..7f47396846d1 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -425,10 +425,15 @@ out: return ret; } -static void dell_rfkill_update(struct rfkill *rfkill, int radio, int status) +static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, + int status) { rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); +} +static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio, + int status) +{ if (hwswitch_state & (BIT(radio - 1))) rfkill_set_hw_state(rfkill, !(status & BIT(16))); } @@ -442,7 +447,7 @@ static void dell_rfkill_query(struct rfkill *rfkill, void *data) status = buffer->output[1]; release_buffer(); - dell_rfkill_update(rfkill, (unsigned long)data, status); + dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status); } static const struct rfkill_ops dell_rfkill_ops = { @@ -528,12 +533,18 @@ static void dell_update_rfkill(struct work_struct *ignored) status = buffer->output[1]; release_buffer(); - if (wifi_rfkill) - dell_rfkill_update(wifi_rfkill, 1, status); - if (bluetooth_rfkill) - dell_rfkill_update(bluetooth_rfkill, 2, status); - if (wwan_rfkill) - dell_rfkill_update(wwan_rfkill, 3, status); + if (wifi_rfkill) { + dell_rfkill_update_hw_state(wifi_rfkill, 1, status); + dell_rfkill_update_sw_state(wifi_rfkill, 1, status); + } + if (bluetooth_rfkill) { + dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status); + dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status); + } + if (wwan_rfkill) { + dell_rfkill_update_hw_state(wwan_rfkill, 3, status); + dell_rfkill_update_sw_state(wwan_rfkill, 3, status); + } } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); -- cgit v1.2.3 From 3f56588a79a06a0499db0077cad6675762ddc40e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:21 +0100 Subject: dell-laptop: Don't read-back sw_state on machines with a hardware switch On machines with a hardware switch, the blocking settings can not be changed through a Fn + wireless-key combo, so there is no reason to read back the blocking state from the BIOS. Reading back is not only not necessary it is actually harmful, since on some machines the blocking state will be cleared to all 0 after a wireless switch toggle, even for radios not controlled by the hw-switch (yeah firmware bugs). This causes "magic" changes to the sw_state. This is inconsistent with other rfkill drivers which preserve the sw_state over a hw kill on / off. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 7f47396846d1..80de0cca1dfa 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -428,7 +428,10 @@ out: static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, int status) { - rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + if (!(status & BIT(0))) { + /* No hw-switch, sync BIOS state to sw_state */ + rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); + } } static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio, -- cgit v1.2.3 From 4d39d88ceb83e88953a76df8b1fa10f43f328038 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:22 +0100 Subject: dell-laptop: Allow changing the sw_state while the radio is blocked by hw This makes dell-laptop's rfkill code consistent with other drivers which allow sw_state changes while hw blocked. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 80de0cca1dfa..834f499a6aec 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -404,7 +404,6 @@ static int dell_rfkill_set(void *data, bool blocked) int disable = blocked ? 1 : 0; unsigned long radio = (unsigned long)data; int hwswitch_bit = (unsigned long)data - 1; - int ret = 0; get_buffer(); dell_send_request(buffer, 17, 11); @@ -412,17 +411,15 @@ static int dell_rfkill_set(void *data, bool blocked) /* If the hardware switch controls this radio, and the hardware switch is disabled, don't allow changing the software state */ if ((hwswitch_state & BIT(hwswitch_bit)) && - !(buffer->output[1] & BIT(16))) { - ret = -EINVAL; + !(buffer->output[1] & BIT(16))) goto out; - } buffer->input[0] = (1 | (radio<<8) | (disable << 16)); dell_send_request(buffer, 17, 11); out: release_buffer(); - return ret; + return 0; } static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, -- cgit v1.2.3 From 04c9a3a06c47b337b90a91e458716262cc45b103 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:23 +0100 Subject: dell-laptop: Sync current block state to BIOS on hw switch change This is necessary for 3 reasons: 1) To apply sw_state changes made while hw-blocked 2) To set all the blocked bits for hw-switch controlled radios to 1 when the switch gets changed to off, this is necessary on some models to actually turn the radio status LEDs off. 3) On some models non hw-switch controlled radios will have their block bit cleared (potentially undoing a soft-block) on hw-switch toggle, this restores the sw-block in this case. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 834f499a6aec..7f59624d805d 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -422,10 +422,16 @@ out: return 0; } +/* Must be called with the buffer held */ static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio, int status) { - if (!(status & BIT(0))) { + if (status & BIT(0)) { + /* Has hw-switch, sync sw_state to BIOS */ + int block = rfkill_blocked(rfkill); + buffer->input[0] = (1 | (radio << 8) | (block << 16)); + dell_send_request(buffer, 17, 11); + } else { /* No hw-switch, sync BIOS state to sw_state */ rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); } @@ -445,9 +451,10 @@ static void dell_rfkill_query(struct rfkill *rfkill, void *data) get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; - release_buffer(); dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status); + + release_buffer(); } static const struct rfkill_ops dell_rfkill_ops = { @@ -531,7 +538,6 @@ static void dell_update_rfkill(struct work_struct *ignored) get_buffer(); dell_send_request(buffer, 17, 11); status = buffer->output[1]; - release_buffer(); if (wifi_rfkill) { dell_rfkill_update_hw_state(wifi_rfkill, 1, status); @@ -545,6 +551,8 @@ static void dell_update_rfkill(struct work_struct *ignored) dell_rfkill_update_hw_state(wwan_rfkill, 3, status); dell_rfkill_update_sw_state(wwan_rfkill, 3, status); } + + release_buffer(); } static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill); -- cgit v1.2.3 From ed1128989ab242f44664b446702a512e5695c4b7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:24 +0100 Subject: dell-laptop: Do not skip setting blocked bit rfkill_set while hw-blocked Instead when hw-blocked always write 1 to the blocked bit for the radio in question. This is necessary to properly set all the blocked bits for hw-switch controlled radios to 1 after power-on and resume. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 7f59624d805d..b33b77991523 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -409,15 +409,14 @@ static int dell_rfkill_set(void *data, bool blocked) dell_send_request(buffer, 17, 11); /* If the hardware switch controls this radio, and the hardware - switch is disabled, don't allow changing the software state */ + switch is disabled, always disable the radio */ if ((hwswitch_state & BIT(hwswitch_bit)) && !(buffer->output[1] & BIT(16))) - goto out; + disable = 1; buffer->input[0] = (1 | (radio<<8) | (disable << 16)); dell_send_request(buffer, 17, 11); -out: release_buffer(); return 0; } -- cgit v1.2.3 From 26c22d63a70f62e0832c6d9f2a2690ab0155d584 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:25 +0100 Subject: dell-laptop: Wait less long before updating rfkill after an rfkill keypress Some time is needed for the BIOS to do its work, but 250ms should be plenty. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index b33b77991523..fe20f67ff44b 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -759,7 +759,7 @@ static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str, switch (data) { case 0x8: schedule_delayed_work(&dell_rfkill_work, - round_jiffies_relative(HZ)); + round_jiffies_relative(HZ / 4)); break; } extended = false; -- cgit v1.2.3 From 8e0e668d0aa09d2eb0a7a260b6c7801796e01bd3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:26 +0100 Subject: dell-laptop: Add a force_rfkill module parameter Setting force_rfkill will cause the dell-laptop rfkill code to skip its whitelist checks, this will allow individual users to override the whitelist, as well as to gather info from users to improve the checks. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index fe20f67ff44b..bd67c893ba07 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -93,6 +93,10 @@ static struct backlight_device *dell_backlight_device; static struct rfkill *wifi_rfkill; static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; +static bool force_rfkill; + +module_param(force_rfkill, bool, 0444); +MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models"); static const struct dmi_system_id dell_device_table[] __initconst = { { @@ -567,7 +571,7 @@ static int __init dell_setup_rfkill(void) * actually testing the rfkill functionality is only done on Latitudes. */ product = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!product || strncmp(product, "Latitude", 8)) + if (!force_rfkill && (!product || strncmp(product, "Latitude", 8))) return 0; get_buffer(); -- cgit v1.2.3 From 2bd4ac139259bb605fc0325a7dda33e2fbb67ae3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Nov 2013 14:00:27 +0100 Subject: dell-laptop: Only enable rfkill functionality on laptops with a hw killswitch All my testing has been on laptops with a hw killswitch, so to be on the safe side disable rfkill functionality on models without a hw killswitch for now. Once we gather some feedback on laptops without a hw killswitch this decision maybe reconsidered. Signed-off-by: Hans de Goede Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bd67c893ba07..c608b1d33f4a 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -580,11 +580,18 @@ static int __init dell_setup_rfkill(void) buffer->input[0] = 0x2; dell_send_request(buffer, 17, 11); hwswitch_state = buffer->output[1]; - /* If there is no hwswitch, then clear all hw-controlled bits */ - if (!(status & BIT(0))) - hwswitch_state &= ~7; release_buffer(); + if (!(status & BIT(0))) { + if (force_rfkill) { + /* No hwsitch, clear all hw-controlled bits */ + hwswitch_state &= ~7; + } else { + /* rfkill is only tested on laptops with a hwswitch */ + return 0; + } + } + if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev, RFKILL_TYPE_WLAN, -- cgit v1.2.3 From 1d885f4257165563342acc6bc473b67d9b36a742 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Wed, 30 Oct 2013 08:07:36 +0900 Subject: sony-laptop: warn on multiple KBD backlight handles MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some BIOS versions/Vaio models apparently ship with two nearly identical functions to handle backlight related controls. The only difference seems to be: If (LEqual (BUF1, 0x40)) { Store (0x40, P80H) Store (BUF2, Local0) - And (Local0, One, Local0) + And (Local0, 0x03, Local0) Store (Local0, ^^H_EC.KLPC) } Avoid erroring out on initialization and messing things up on cleanup for now since we never call into these methods with anything different than 1 or 0. This issue was found on a Sony VPCSE1V9E/BIOS R2087H4. Cc: Marco Krüger Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 47caab0ea7a1..03f02cc476e5 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -145,7 +145,8 @@ static void sony_nc_thermal_resume(void); #endif static int sony_nc_kbd_backlight_setup(struct platform_device *pd, unsigned int handle); -static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd); +static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd, + unsigned int handle); static int sony_nc_battery_care_setup(struct platform_device *pd, unsigned int handle); @@ -1444,7 +1445,7 @@ static void sony_nc_function_cleanup(struct platform_device *pd) case 0x014b: case 0x014c: case 0x0163: - sony_nc_kbd_backlight_cleanup(pd); + sony_nc_kbd_backlight_cleanup(pd, handle); break; default: continue; @@ -1822,6 +1823,12 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd, int result; int ret = 0; + if (kbdbl_ctl) { + pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n", + handle, kbdbl_ctl->handle); + return -EBUSY; + } + /* verify the kbd backlight presence, these handles are not used for * keyboard backlight only */ @@ -1881,9 +1888,10 @@ outkzalloc: return ret; } -static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd) +static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd, + unsigned int handle) { - if (kbdbl_ctl) { + if (kbdbl_ctl && handle == kbdbl_ctl->handle) { device_remove_file(&pd->dev, &kbdbl_ctl->mode_attr); device_remove_file(&pd->dev, &kbdbl_ctl->timeout_attr); kfree(kbdbl_ctl); -- cgit v1.2.3 From a825bc87b2694dbefe39590a3efe29c5da4d3dd3 Mon Sep 17 00:00:00 2001 From: Stephen Gildea Date: Wed, 13 Nov 2013 08:17:36 +0900 Subject: sony-laptop: fixe typos in sony_laptop_input_keycode_map Signed-off-by: Stephen Gildea Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 03f02cc476e5..c45c60f7ea2f 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -305,8 +305,8 @@ static int sony_laptop_input_keycode_map[] = { KEY_FN_F10, /* 14 SONYPI_EVENT_FNKEY_F10 */ KEY_FN_F11, /* 15 SONYPI_EVENT_FNKEY_F11 */ KEY_FN_F12, /* 16 SONYPI_EVENT_FNKEY_F12 */ - KEY_FN_F1, /* 17 SONYPI_EVENT_FNKEY_1 */ - KEY_FN_F2, /* 18 SONYPI_EVENT_FNKEY_2 */ + KEY_FN_1, /* 17 SONYPI_EVENT_FNKEY_1 */ + KEY_FN_2, /* 18 SONYPI_EVENT_FNKEY_2 */ KEY_FN_D, /* 19 SONYPI_EVENT_FNKEY_D */ KEY_FN_E, /* 20 SONYPI_EVENT_FNKEY_E */ KEY_FN_F, /* 21 SONYPI_EVENT_FNKEY_F */ -- cgit v1.2.3 From b222cca6002c9396c0ac03b68756f8c565d73561 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 23 Oct 2013 12:14:52 -0700 Subject: platform:x86: Remove OOM message after input_allocate_device Emitting an OOM message isn't necessary after input_allocate_device as there's a generic OOM and a dump_stack already done. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-laptop.c | 5 ++--- drivers/platform/x86/eeepc-laptop.c | 4 +--- drivers/platform/x86/ideapad-laptop.c | 4 +--- drivers/platform/x86/intel_mid_powerbtn.c | 4 +--- drivers/platform/x86/panasonic-laptop.c | 5 +---- drivers/platform/x86/thinkpad_acpi.c | 1 - drivers/platform/x86/topstar-laptop.c | 4 +--- drivers/platform/x86/toshiba_acpi.c | 4 +--- 8 files changed, 8 insertions(+), 23 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 0e9c169b42f8..594323a926cf 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -1494,10 +1494,9 @@ static int asus_input_init(struct asus_laptop *asus) int error; input = input_allocate_device(); - if (!input) { - pr_warn("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } + input->name = "Asus Laptop extra buttons"; input->phys = ASUS_LAPTOP_FILE "/input0"; input->id.bustype = BUS_HOST; diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index aefcc32e5634..dec68e7a99c7 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1203,10 +1203,8 @@ static int eeepc_input_init(struct eeepc_laptop *eeepc) int error; input = input_allocate_device(); - if (!input) { - pr_info("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } input->name = "Asus EeePC extra buttons"; input->phys = EEEPC_LAPTOP_FILE "/input0"; diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 6788acc22ab9..19ec95147f69 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -570,10 +570,8 @@ static int ideapad_input_init(struct ideapad_private *priv) int error; inputdev = input_allocate_device(); - if (!inputdev) { - pr_info("Unable to allocate input device\n"); + if (!inputdev) return -ENOMEM; - } inputdev->name = "Ideapad extra buttons"; inputdev->phys = "ideapad/input0"; diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 6b18aba82cfa..8d6775266d66 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -66,10 +66,8 @@ static int mfld_pb_probe(struct platform_device *pdev) return -EINVAL; input = input_allocate_device(); - if (!input) { - dev_err(&pdev->dev, "Input device allocation error\n"); + if (!input) return -ENOMEM; - } input->name = pdev->name; input->phys = "power-button/input0"; diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 10d12b221601..3008fd20572e 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -490,11 +490,8 @@ static int acpi_pcc_init_input(struct pcc_acpi *pcc) int error; input_dev = input_allocate_device(); - if (!input_dev) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't allocate input device for hotkey")); + if (!input_dev) return -ENOMEM; - } input_dev->name = ACPI_PCC_DRIVER_NAME; input_dev->phys = ACPI_PCC_INPUT_PHYS; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 05e046aa5e31..a5e99d749246 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9163,7 +9163,6 @@ static int __init thinkpad_acpi_module_init(void) mutex_init(&tpacpi_inputdev_send_mutex); tpacpi_inputdev = input_allocate_device(); if (!tpacpi_inputdev) { - pr_err("unable to allocate input device\n"); thinkpad_acpi_module_exit(); return -ENOMEM; } else { diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c index 67897c8740ba..e597de05e6c2 100644 --- a/drivers/platform/x86/topstar-laptop.c +++ b/drivers/platform/x86/topstar-laptop.c @@ -97,10 +97,8 @@ static int acpi_topstar_init_hkey(struct topstar_hkey *hkey) int error; input = input_allocate_device(); - if (!input) { - pr_err("Unable to allocate input device\n"); + if (!input) return -ENOMEM; - } input->name = "Topstar Laptop extra buttons"; input->phys = "topstar/input0"; diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 0cfadb65f7c6..7fce391818d3 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -975,10 +975,8 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev) u32 hci_result; dev->hotkey_dev = input_allocate_device(); - if (!dev->hotkey_dev) { - pr_info("Unable to register input device\n"); + if (!dev->hotkey_dev) return -ENOMEM; - } dev->hotkey_dev->name = "Toshiba input device"; dev->hotkey_dev->phys = "toshiba_acpi/input0"; -- cgit v1.2.3 From cfb743bf6173063b57ef5a8185ea87f130209d4d Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 12 Nov 2013 11:09:22 +0800 Subject: dell-wmi: Add KEY_MICMUTE to bios_to_linux_keycode Signed-off-by: Alex Hung Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-wmi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index fa9a2171cc13..60e0900bc117 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -130,7 +130,8 @@ static const u16 bios_to_linux_keycode[256] __initconst = { KEY_BRIGHTNESSUP, KEY_UNKNOWN, KEY_KBDILLUMTOGGLE, KEY_UNKNOWN, KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN, KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN, KEY_PROG2, - KEY_UNKNOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, + KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_MICMUTE, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -139,8 +140,8 @@ static const u16 bios_to_linux_keycode[256] __initconst = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - KEY_PROG3 + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PROG3 }; static struct input_dev *dell_wmi_input_dev; -- cgit v1.2.3 From 997daa1bd9aca412ab97955a35b26c460c0ec7a4 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 29 Oct 2013 14:57:58 +0800 Subject: hp-wmi: detect "2009 BIOS or later" flag by WMI 0x0d for wireless cmd Some HP BIOS has dummy WMI 0x05 cmd and it causes wireless set cmd to fail. This patch fixes the problem by detecting "2009 BIOS or later" flag which determines whether WMI 0x1b is supported and is used to replace WMI 0x05. Signed-off-by: Alex Hung Signed-off-by: Matthew Garrett --- drivers/platform/x86/hp-wmi.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 1c86fa0857c8..8ba8956b5a48 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -54,6 +54,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4"); #define HPWMI_HARDWARE_QUERY 0x4 #define HPWMI_WIRELESS_QUERY 0x5 #define HPWMI_HOTKEY_QUERY 0xc +#define HPWMI_FEATURE_QUERY 0xd #define HPWMI_WIRELESS2_QUERY 0x1b #define HPWMI_POSTCODEERROR_QUERY 0x2a @@ -292,6 +293,17 @@ static int hp_wmi_tablet_state(void) return (state & 0x4) ? 1 : 0; } +static int hp_wmi_bios_2009_later(void) +{ + int state = 0; + int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state, + sizeof(state), sizeof(state)); + if (ret) + return ret; + + return (state & 0x10) ? 1 : 0; +} + static int hp_wmi_set_block(void *data, bool blocked) { enum hp_wmi_radio r = (enum hp_wmi_radio) data; @@ -871,7 +883,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) gps_rfkill = NULL; rfkill2_count = 0; - if (hp_wmi_rfkill_setup(device)) + if (hp_wmi_bios_2009_later() || hp_wmi_rfkill_setup(device)) hp_wmi_rfkill2_setup(device); err = device_create_file(&device->dev, &dev_attr_display); -- cgit v1.2.3 From ab0431059ed0d0e3a9e532ad0488ada25021249d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 7 Nov 2013 14:25:45 -0800 Subject: platform: add chrome platform directory It makes sense to split out the Chromebook/Chromebox hardware platform drivers to a separate subdirectory, since some of it will be shared between ARM and x86. This moves over the existing chromeos_laptop driver without making any other changes, and adds appropriate Kconfig entries for the new directory. It also adds a MAINTAINERS entry for the new subdir. Signed-off-by: Olof Johansson Signed-off-by: Matthew Garrett --- MAINTAINERS | 5 + drivers/platform/Kconfig | 1 + drivers/platform/Makefile | 1 + drivers/platform/chrome/Kconfig | 28 ++ drivers/platform/chrome/Makefile | 2 + drivers/platform/chrome/chromeos_laptop.c | 408 ++++++++++++++++++++++++++++++ drivers/platform/x86/Kconfig | 11 - drivers/platform/x86/Makefile | 1 - drivers/platform/x86/chromeos_laptop.c | 408 ------------------------------ 9 files changed, 445 insertions(+), 420 deletions(-) create mode 100644 drivers/platform/chrome/Kconfig create mode 100644 drivers/platform/chrome/Makefile create mode 100644 drivers/platform/chrome/chromeos_laptop.c delete mode 100644 drivers/platform/x86/chromeos_laptop.c diff --git a/MAINTAINERS b/MAINTAINERS index 63f30484932b..d08f66f645aa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2142,6 +2142,11 @@ L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ +CHROME HARDWARE PLATFORM SUPPORT +M: Olof Johansson +S: Maintained +F: drivers/platform/chrome/ + CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti M: Sujith Sankar diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 69616aeaa966..09fde58b12e0 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -5,3 +5,4 @@ if GOLDFISH source "drivers/platform/goldfish/Kconfig" endif +source "drivers/platform/chrome/Kconfig" diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 8a44a4cd6d1e..3656b7b17b99 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_X86) += x86/ obj-$(CONFIG_OLPC) += olpc/ obj-$(CONFIG_GOLDFISH) += goldfish/ +obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig new file mode 100644 index 000000000000..b13303e75a34 --- /dev/null +++ b/drivers/platform/chrome/Kconfig @@ -0,0 +1,28 @@ +# +# Platform support for Chrome OS hardware (Chromebooks and Chromeboxes) +# + +menuconfig CHROME_PLATFORMS + bool "Platform support for Chrome hardware" + depends on X86 + ---help--- + Say Y here to get to see options for platform support for + various Chromebooks and Chromeboxes. This option alone does + not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if CHROME_PLATFORMS + +config CHROMEOS_LAPTOP + tristate "Chrome OS Laptop" + depends on I2C + depends on DMI + ---help--- + This driver instantiates i2c and smbus devices such as + light sensors and touchpads. + + If you have a supported Chromebook, choose Y or M here. + The module will be called chromeos_laptop. + +endif # CHROMEOS_PLATFORMS diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile new file mode 100644 index 000000000000..015e9195e226 --- /dev/null +++ b/drivers/platform/chrome/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o diff --git a/drivers/platform/chrome/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c new file mode 100644 index 000000000000..3e5b4497a1d0 --- /dev/null +++ b/drivers/platform/chrome/chromeos_laptop.c @@ -0,0 +1,408 @@ +/* + * chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices. + * + * Author : Benson Leung + * + * Copyright (C) 2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#define ATMEL_TP_I2C_ADDR 0x4b +#define ATMEL_TP_I2C_BL_ADDR 0x25 +#define ATMEL_TS_I2C_ADDR 0x4a +#define ATMEL_TS_I2C_BL_ADDR 0x26 +#define CYAPA_TP_I2C_ADDR 0x67 +#define ISL_ALS_I2C_ADDR 0x44 +#define TAOS_ALS_I2C_ADDR 0x29 + +static struct i2c_client *als; +static struct i2c_client *tp; +static struct i2c_client *ts; + +const char *i2c_adapter_names[] = { + "SMBus I801 adapter", + "i915 gmbus vga", + "i915 gmbus panel", +}; + +/* Keep this enum consistent with i2c_adapter_names */ +enum i2c_adapter_type { + I2C_ADAPTER_SMBUS = 0, + I2C_ADAPTER_VGADDC, + I2C_ADAPTER_PANEL, +}; + +static struct i2c_board_info __initdata cyapa_device = { + I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR), + .flags = I2C_CLIENT_WAKE, +}; + +static struct i2c_board_info __initdata isl_als_device = { + I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR), +}; + +static struct i2c_board_info __initdata tsl2583_als_device = { + I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR), +}; + +static struct i2c_board_info __initdata tsl2563_als_device = { + I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR), +}; + +static struct mxt_platform_data atmel_224s_tp_platform_data = { + .x_line = 18, + .y_line = 12, + .x_size = 102*20, + .y_size = 68*20, + .blen = 0x80, /* Gain setting is in upper 4 bits */ + .threshold = 0x32, + .voltage = 0, /* 3.3V */ + .orient = MXT_VERTICAL_FLIP, + .irqflags = IRQF_TRIGGER_FALLING, + .is_tp = true, + .key_map = { KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + BTN_LEFT }, + .config = NULL, + .config_length = 0, +}; + +static struct i2c_board_info __initdata atmel_224s_tp_device = { + I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR), + .platform_data = &atmel_224s_tp_platform_data, + .flags = I2C_CLIENT_WAKE, +}; + +static struct mxt_platform_data atmel_1664s_platform_data = { + .x_line = 32, + .y_line = 50, + .x_size = 1700, + .y_size = 2560, + .blen = 0x89, /* Gain setting is in upper 4 bits */ + .threshold = 0x28, + .voltage = 0, /* 3.3V */ + .orient = MXT_ROTATED_90_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, + .is_tp = false, + .config = NULL, + .config_length = 0, +}; + +static struct i2c_board_info __initdata atmel_1664s_device = { + I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR), + .platform_data = &atmel_1664s_platform_data, + .flags = I2C_CLIENT_WAKE, +}; + +static struct i2c_client __init *__add_probed_i2c_device( + const char *name, + int bus, + struct i2c_board_info *info, + const unsigned short *addrs) +{ + const struct dmi_device *dmi_dev; + const struct dmi_dev_onboard *dev_data; + struct i2c_adapter *adapter; + struct i2c_client *client; + + if (bus < 0) + return NULL; + /* + * If a name is specified, look for irq platform information stashed + * in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware. + */ + if (name) { + dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, name, NULL); + if (!dmi_dev) { + pr_err("%s failed to dmi find device %s.\n", + __func__, + name); + return NULL; + } + dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data; + if (!dev_data) { + pr_err("%s failed to get data from dmi for %s.\n", + __func__, name); + return NULL; + } + info->irq = dev_data->instance; + } + + adapter = i2c_get_adapter(bus); + if (!adapter) { + pr_err("%s failed to get i2c adapter %d.\n", __func__, bus); + return NULL; + } + + /* add the i2c device */ + client = i2c_new_probed_device(adapter, info, addrs, NULL); + if (!client) + pr_err("%s failed to register device %d-%02x\n", + __func__, bus, info->addr); + else + pr_debug("%s added i2c device %d-%02x\n", + __func__, bus, info->addr); + + i2c_put_adapter(adapter); + return client; +} + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + return 0; + adapter = to_i2c_adapter(dev); + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = i2c_adapter_names[type]; + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", __func__, + name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + return adapter->nr; +} + +/* + * Takes a list of addresses in addrs as such : + * { addr1, ... , addrn, I2C_CLIENT_END }; + * add_probed_i2c_device will use i2c_new_probed_device + * and probe for devices at all of the addresses listed. + * Returns NULL if no devices found. + * See Documentation/i2c/instantiating-devices for more information. + */ +static __init struct i2c_client *add_probed_i2c_device( + const char *name, + enum i2c_adapter_type type, + struct i2c_board_info *info, + const unsigned short *addrs) +{ + return __add_probed_i2c_device(name, + find_i2c_adapter_num(type), + info, + addrs); +} + +/* + * Probes for a device at a single address, the one provided by + * info->addr. + * Returns NULL if no device found. + */ +static __init struct i2c_client *add_i2c_device(const char *name, + enum i2c_adapter_type type, + struct i2c_board_info *info) +{ + const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END }; + return __add_probed_i2c_device(name, + find_i2c_adapter_num(type), + info, + addr_list); +} + + +static struct i2c_client __init *add_smbus_device(const char *name, + struct i2c_board_info *info) +{ + return add_i2c_device(name, I2C_ADAPTER_SMBUS, info); +} + +static int __init setup_cyapa_smbus_tp(const struct dmi_system_id *id) +{ + /* add cyapa touchpad on smbus */ + tp = add_smbus_device("trackpad", &cyapa_device); + return 0; +} + +static int __init setup_atmel_224s_tp(const struct dmi_system_id *id) +{ + const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR, + ATMEL_TP_I2C_ADDR, + I2C_CLIENT_END }; + + /* add atmel mxt touchpad on VGA DDC GMBus */ + tp = add_probed_i2c_device("trackpad", I2C_ADAPTER_VGADDC, + &atmel_224s_tp_device, addr_list); + return 0; +} + +static int __init setup_atmel_1664s_ts(const struct dmi_system_id *id) +{ + const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR, + ATMEL_TS_I2C_ADDR, + I2C_CLIENT_END }; + + /* add atmel mxt touch device on PANEL GMBus */ + ts = add_probed_i2c_device("touchscreen", I2C_ADAPTER_PANEL, + &atmel_1664s_device, addr_list); + return 0; +} + + +static int __init setup_isl29018_als(const struct dmi_system_id *id) +{ + /* add isl29018 light sensor */ + als = add_smbus_device("lightsensor", &isl_als_device); + return 0; +} + +static int __init setup_isl29023_als(const struct dmi_system_id *id) +{ + /* add isl29023 light sensor on Panel GMBus */ + als = add_i2c_device("lightsensor", I2C_ADAPTER_PANEL, + &isl_als_device); + return 0; +} + +static int __init setup_tsl2583_als(const struct dmi_system_id *id) +{ + /* add tsl2583 light sensor on smbus */ + als = add_smbus_device(NULL, &tsl2583_als_device); + return 0; +} + +static int __init setup_tsl2563_als(const struct dmi_system_id *id) +{ + /* add tsl2563 light sensor on smbus */ + als = add_smbus_device(NULL, &tsl2563_als_device); + return 0; +} + +static struct dmi_system_id __initdata chromeos_laptop_dmi_table[] = { + { + .ident = "Samsung Series 5 550 - Touchpad", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"), + DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"), + }, + .callback = setup_cyapa_smbus_tp, + }, + { + .ident = "Chromebook Pixel - Touchscreen", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Link"), + }, + .callback = setup_atmel_1664s_ts, + }, + { + .ident = "Chromebook Pixel - Touchpad", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Link"), + }, + .callback = setup_atmel_224s_tp, + }, + { + .ident = "Samsung Series 5 550 - Light Sensor", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"), + DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"), + }, + .callback = setup_isl29018_als, + }, + { + .ident = "Chromebook Pixel - Light Sensor", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Link"), + }, + .callback = setup_isl29023_als, + }, + { + .ident = "Acer C7 Chromebook - Touchpad", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"), + }, + .callback = setup_cyapa_smbus_tp, + }, + { + .ident = "HP Pavilion 14 Chromebook - Touchpad", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"), + }, + .callback = setup_cyapa_smbus_tp, + }, + { + .ident = "Samsung Series 5 - Light Sensor", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Alex"), + }, + .callback = setup_tsl2583_als, + }, + { + .ident = "Cr-48 - Light Sensor", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Mario"), + }, + .callback = setup_tsl2563_als, + }, + { + .ident = "Acer AC700 - Light Sensor", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), + }, + .callback = setup_tsl2563_als, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table); + +static int __init chromeos_laptop_init(void) +{ + if (!dmi_check_system(chromeos_laptop_dmi_table)) { + pr_debug("%s unsupported system.\n", __func__); + return -ENODEV; + } + return 0; +} + +static void __exit chromeos_laptop_exit(void) +{ + if (als) + i2c_unregister_device(als); + if (tp) + i2c_unregister_device(tp); + if (ts) + i2c_unregister_device(ts); +} + +module_init(chromeos_laptop_init); +module_exit(chromeos_laptop_exit); + +MODULE_DESCRIPTION("Chrome OS Laptop driver"); +MODULE_AUTHOR("Benson Leung "); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index b51a7460cc49..d9dcd37b5a52 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -79,17 +79,6 @@ config ASUS_LAPTOP If you have an ACPI-compatible ASUS laptop, say Y or M here. -config CHROMEOS_LAPTOP - tristate "Chrome OS Laptop" - depends on I2C - depends on DMI - ---help--- - This driver instantiates i2c and smbus devices such as - light sensors and touchpads. - - If you have a supported Chromebook, choose Y or M here. - The module will be called chromeos_laptop. - config DELL_LAPTOP tristate "Dell Laptop Extras" depends on X86 diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 5dbe19324351..f0e6aa407ffb 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o -obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o obj-$(CONFIG_INTEL_RST) += intel-rst.o obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o diff --git a/drivers/platform/x86/chromeos_laptop.c b/drivers/platform/x86/chromeos_laptop.c deleted file mode 100644 index 3e5b4497a1d0..000000000000 --- a/drivers/platform/x86/chromeos_laptop.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices. - * - * Author : Benson Leung - * - * Copyright (C) 2012 Google, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include - -#define ATMEL_TP_I2C_ADDR 0x4b -#define ATMEL_TP_I2C_BL_ADDR 0x25 -#define ATMEL_TS_I2C_ADDR 0x4a -#define ATMEL_TS_I2C_BL_ADDR 0x26 -#define CYAPA_TP_I2C_ADDR 0x67 -#define ISL_ALS_I2C_ADDR 0x44 -#define TAOS_ALS_I2C_ADDR 0x29 - -static struct i2c_client *als; -static struct i2c_client *tp; -static struct i2c_client *ts; - -const char *i2c_adapter_names[] = { - "SMBus I801 adapter", - "i915 gmbus vga", - "i915 gmbus panel", -}; - -/* Keep this enum consistent with i2c_adapter_names */ -enum i2c_adapter_type { - I2C_ADAPTER_SMBUS = 0, - I2C_ADAPTER_VGADDC, - I2C_ADAPTER_PANEL, -}; - -static struct i2c_board_info __initdata cyapa_device = { - I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR), - .flags = I2C_CLIENT_WAKE, -}; - -static struct i2c_board_info __initdata isl_als_device = { - I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR), -}; - -static struct i2c_board_info __initdata tsl2583_als_device = { - I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR), -}; - -static struct i2c_board_info __initdata tsl2563_als_device = { - I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR), -}; - -static struct mxt_platform_data atmel_224s_tp_platform_data = { - .x_line = 18, - .y_line = 12, - .x_size = 102*20, - .y_size = 68*20, - .blen = 0x80, /* Gain setting is in upper 4 bits */ - .threshold = 0x32, - .voltage = 0, /* 3.3V */ - .orient = MXT_VERTICAL_FLIP, - .irqflags = IRQF_TRIGGER_FALLING, - .is_tp = true, - .key_map = { KEY_RESERVED, - KEY_RESERVED, - KEY_RESERVED, - BTN_LEFT }, - .config = NULL, - .config_length = 0, -}; - -static struct i2c_board_info __initdata atmel_224s_tp_device = { - I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR), - .platform_data = &atmel_224s_tp_platform_data, - .flags = I2C_CLIENT_WAKE, -}; - -static struct mxt_platform_data atmel_1664s_platform_data = { - .x_line = 32, - .y_line = 50, - .x_size = 1700, - .y_size = 2560, - .blen = 0x89, /* Gain setting is in upper 4 bits */ - .threshold = 0x28, - .voltage = 0, /* 3.3V */ - .orient = MXT_ROTATED_90_COUNTER, - .irqflags = IRQF_TRIGGER_FALLING, - .is_tp = false, - .config = NULL, - .config_length = 0, -}; - -static struct i2c_board_info __initdata atmel_1664s_device = { - I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR), - .platform_data = &atmel_1664s_platform_data, - .flags = I2C_CLIENT_WAKE, -}; - -static struct i2c_client __init *__add_probed_i2c_device( - const char *name, - int bus, - struct i2c_board_info *info, - const unsigned short *addrs) -{ - const struct dmi_device *dmi_dev; - const struct dmi_dev_onboard *dev_data; - struct i2c_adapter *adapter; - struct i2c_client *client; - - if (bus < 0) - return NULL; - /* - * If a name is specified, look for irq platform information stashed - * in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware. - */ - if (name) { - dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, name, NULL); - if (!dmi_dev) { - pr_err("%s failed to dmi find device %s.\n", - __func__, - name); - return NULL; - } - dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data; - if (!dev_data) { - pr_err("%s failed to get data from dmi for %s.\n", - __func__, name); - return NULL; - } - info->irq = dev_data->instance; - } - - adapter = i2c_get_adapter(bus); - if (!adapter) { - pr_err("%s failed to get i2c adapter %d.\n", __func__, bus); - return NULL; - } - - /* add the i2c device */ - client = i2c_new_probed_device(adapter, info, addrs, NULL); - if (!client) - pr_err("%s failed to register device %d-%02x\n", - __func__, bus, info->addr); - else - pr_debug("%s added i2c device %d-%02x\n", - __func__, bus, info->addr); - - i2c_put_adapter(adapter); - return client; -} - -static int __init __find_i2c_adap(struct device *dev, void *data) -{ - const char *name = data; - static const char *prefix = "i2c-"; - struct i2c_adapter *adapter; - if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) - return 0; - adapter = to_i2c_adapter(dev); - return (strncmp(adapter->name, name, strlen(name)) == 0); -} - -static int __init find_i2c_adapter_num(enum i2c_adapter_type type) -{ - struct device *dev = NULL; - struct i2c_adapter *adapter; - const char *name = i2c_adapter_names[type]; - /* find the adapter by name */ - dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, - __find_i2c_adap); - if (!dev) { - pr_err("%s: i2c adapter %s not found on system.\n", __func__, - name); - return -ENODEV; - } - adapter = to_i2c_adapter(dev); - return adapter->nr; -} - -/* - * Takes a list of addresses in addrs as such : - * { addr1, ... , addrn, I2C_CLIENT_END }; - * add_probed_i2c_device will use i2c_new_probed_device - * and probe for devices at all of the addresses listed. - * Returns NULL if no devices found. - * See Documentation/i2c/instantiating-devices for more information. - */ -static __init struct i2c_client *add_probed_i2c_device( - const char *name, - enum i2c_adapter_type type, - struct i2c_board_info *info, - const unsigned short *addrs) -{ - return __add_probed_i2c_device(name, - find_i2c_adapter_num(type), - info, - addrs); -} - -/* - * Probes for a device at a single address, the one provided by - * info->addr. - * Returns NULL if no device found. - */ -static __init struct i2c_client *add_i2c_device(const char *name, - enum i2c_adapter_type type, - struct i2c_board_info *info) -{ - const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END }; - return __add_probed_i2c_device(name, - find_i2c_adapter_num(type), - info, - addr_list); -} - - -static struct i2c_client __init *add_smbus_device(const char *name, - struct i2c_board_info *info) -{ - return add_i2c_device(name, I2C_ADAPTER_SMBUS, info); -} - -static int __init setup_cyapa_smbus_tp(const struct dmi_system_id *id) -{ - /* add cyapa touchpad on smbus */ - tp = add_smbus_device("trackpad", &cyapa_device); - return 0; -} - -static int __init setup_atmel_224s_tp(const struct dmi_system_id *id) -{ - const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR, - ATMEL_TP_I2C_ADDR, - I2C_CLIENT_END }; - - /* add atmel mxt touchpad on VGA DDC GMBus */ - tp = add_probed_i2c_device("trackpad", I2C_ADAPTER_VGADDC, - &atmel_224s_tp_device, addr_list); - return 0; -} - -static int __init setup_atmel_1664s_ts(const struct dmi_system_id *id) -{ - const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR, - ATMEL_TS_I2C_ADDR, - I2C_CLIENT_END }; - - /* add atmel mxt touch device on PANEL GMBus */ - ts = add_probed_i2c_device("touchscreen", I2C_ADAPTER_PANEL, - &atmel_1664s_device, addr_list); - return 0; -} - - -static int __init setup_isl29018_als(const struct dmi_system_id *id) -{ - /* add isl29018 light sensor */ - als = add_smbus_device("lightsensor", &isl_als_device); - return 0; -} - -static int __init setup_isl29023_als(const struct dmi_system_id *id) -{ - /* add isl29023 light sensor on Panel GMBus */ - als = add_i2c_device("lightsensor", I2C_ADAPTER_PANEL, - &isl_als_device); - return 0; -} - -static int __init setup_tsl2583_als(const struct dmi_system_id *id) -{ - /* add tsl2583 light sensor on smbus */ - als = add_smbus_device(NULL, &tsl2583_als_device); - return 0; -} - -static int __init setup_tsl2563_als(const struct dmi_system_id *id) -{ - /* add tsl2563 light sensor on smbus */ - als = add_smbus_device(NULL, &tsl2563_als_device); - return 0; -} - -static struct dmi_system_id __initdata chromeos_laptop_dmi_table[] = { - { - .ident = "Samsung Series 5 550 - Touchpad", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"), - DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"), - }, - .callback = setup_cyapa_smbus_tp, - }, - { - .ident = "Chromebook Pixel - Touchscreen", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), - DMI_MATCH(DMI_PRODUCT_NAME, "Link"), - }, - .callback = setup_atmel_1664s_ts, - }, - { - .ident = "Chromebook Pixel - Touchpad", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), - DMI_MATCH(DMI_PRODUCT_NAME, "Link"), - }, - .callback = setup_atmel_224s_tp, - }, - { - .ident = "Samsung Series 5 550 - Light Sensor", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"), - DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"), - }, - .callback = setup_isl29018_als, - }, - { - .ident = "Chromebook Pixel - Light Sensor", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), - DMI_MATCH(DMI_PRODUCT_NAME, "Link"), - }, - .callback = setup_isl29023_als, - }, - { - .ident = "Acer C7 Chromebook - Touchpad", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"), - }, - .callback = setup_cyapa_smbus_tp, - }, - { - .ident = "HP Pavilion 14 Chromebook - Touchpad", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"), - }, - .callback = setup_cyapa_smbus_tp, - }, - { - .ident = "Samsung Series 5 - Light Sensor", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Alex"), - }, - .callback = setup_tsl2583_als, - }, - { - .ident = "Cr-48 - Light Sensor", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Mario"), - }, - .callback = setup_tsl2563_als, - }, - { - .ident = "Acer AC700 - Light Sensor", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), - }, - .callback = setup_tsl2563_als, - }, - { } -}; -MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table); - -static int __init chromeos_laptop_init(void) -{ - if (!dmi_check_system(chromeos_laptop_dmi_table)) { - pr_debug("%s unsupported system.\n", __func__); - return -ENODEV; - } - return 0; -} - -static void __exit chromeos_laptop_exit(void) -{ - if (als) - i2c_unregister_device(als); - if (tp) - i2c_unregister_device(tp); - if (ts) - i2c_unregister_device(ts); -} - -module_init(chromeos_laptop_init); -module_exit(chromeos_laptop_exit); - -MODULE_DESCRIPTION("Chrome OS Laptop driver"); -MODULE_AUTHOR("Benson Leung "); -MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cab6661344f14a09d7aecdf821a40f68ef9b18cc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 24 Oct 2013 16:06:32 +0200 Subject: thinkpad_acpi: Fix build error when CONFIG_SND_MAX_CARDS > 32 SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this can be over 32bit integer range, which leads to a build error. Cc: [v3.11+] Signed-off-by: Takashi Iwai Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a5e99d749246..58b0274d24cc 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6438,7 +6438,12 @@ static struct ibm_struct brightness_driver_data = { #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control" #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME -static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ +#if SNDRV_CARDS <= 32 +#define DEFAULT_ALSA_IDX ~((1 << (SNDRV_CARDS - 3)) - 1) +#else +#define DEFAULT_ALSA_IDX ~((1 << (32 - 3)) - 1) +#endif +static int alsa_index = DEFAULT_ALSA_IDX; /* last three slots */ static char *alsa_id = "ThinkPadEC"; static bool alsa_enable = SNDRV_DEFAULT_ENABLE1; -- cgit v1.2.3 From e97a1c981723f3b7620b124859383a457b12f06f Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:04 -0800 Subject: ipc: Added platform data structure Since the same ipc driver can be used by many platforms, using macros for defining ipc_base and i2c_base addresses is not a scalable approach. So added a platform data structure to pass this information. Signed-off-by: Kuppuswamy Sathyanarayanan Acked-by: Alan Cox Cc: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 37 ++++++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index d654f831410d..39ff57bdf18f 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -58,12 +58,29 @@ * message handler is called within firmware. */ -#define IPC_BASE_ADDR 0xFF11C000 /* IPC1 base register address */ -#define IPC_MAX_ADDR 0x100 /* Maximum IPC regisers */ #define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */ #define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */ -#define IPC_I2C_BASE 0xFF12B000 /* I2C control register base address */ -#define IPC_I2C_MAX_ADDR 0x10 /* Maximum I2C regisers */ + +enum { + SCU_IPC_LINCROFT, +}; + +/* intel scu ipc driver data*/ +struct intel_scu_ipc_pdata_t { + u32 ipc_base; + u32 i2c_base; + u32 ipc_len; + u32 i2c_len; +}; + +static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { + [SCU_IPC_LINCROFT] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, +}; static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id); static void ipc_remove(struct pci_dev *pdev); @@ -504,12 +521,16 @@ static irqreturn_t ioc(int irq, void *dev_id) */ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) { - int err; + int err, pid; + struct intel_scu_ipc_pdata_t *pdata; resource_size_t pci_resource; if (ipcdev.pdev) /* We support only one SCU */ return -EBUSY; + pid = id->driver_data; + pdata = &intel_scu_ipc_pdata[pid]; + ipcdev.pdev = pci_dev_get(dev); err = pci_enable_device(dev); @@ -527,11 +548,11 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev)) return -EBUSY; - ipcdev.ipc_base = ioremap_nocache(IPC_BASE_ADDR, IPC_MAX_ADDR); + ipcdev.ipc_base = ioremap_nocache(pdata->ipc_base, pdata->ipc_len); if (!ipcdev.ipc_base) return -ENOMEM; - ipcdev.i2c_base = ioremap_nocache(IPC_I2C_BASE, IPC_I2C_MAX_ADDR); + ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len); if (!ipcdev.i2c_base) { iounmap(ipcdev.ipc_base); return -ENOMEM; @@ -564,7 +585,7 @@ static void ipc_remove(struct pci_dev *pdev) } static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)}, + {PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT}, { 0,} }; MODULE_DEVICE_TABLE(pci, pci_ids); -- cgit v1.2.3 From 7f95afb317d94f383877e67dc52fda17dc37fa21 Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:05 -0800 Subject: ipc: Enabled ipc support for additional intel platforms Enabled ipc support for penwell, clovertrail & tangier platforms. Signed-off-by: Kuppuswamy Sathyanarayanan Cc: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 39ff57bdf18f..86b6ce2a7a47 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -63,6 +63,9 @@ enum { SCU_IPC_LINCROFT, + SCU_IPC_PENWELL, + SCU_IPC_CLOVERVIEW, + SCU_IPC_TANGIER, }; /* intel scu ipc driver data*/ @@ -80,6 +83,24 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { .ipc_len = 0x100, .i2c_len = 0x10, }, + [SCU_IPC_PENWELL] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, + [SCU_IPC_CLOVERVIEW] = { + .ipc_base = 0xff11c000, + .i2c_base = 0xff12b000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, + [SCU_IPC_TANGIER] = { + .ipc_base = 0xff009000, + .i2c_base = 0xff00d000, + .ipc_len = 0x100, + .i2c_len = 0x10, + }, }; static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id); @@ -586,6 +607,9 @@ static void ipc_remove(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { {PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT}, + {PCI_VDEVICE(INTEL, 0x080e), SCU_IPC_PENWELL}, + {PCI_VDEVICE(INTEL, 0x08ea), SCU_IPC_CLOVERVIEW}, + {PCI_VDEVICE(INTEL, 0x11a0), SCU_IPC_TANGIER}, { 0,} }; MODULE_DEVICE_TABLE(pci, pci_ids); -- cgit v1.2.3 From c7094d1d994c23950d8a55d33dcb7ed6d9b13f8f Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Thu, 14 Nov 2013 14:15:06 -0800 Subject: ipc: Handle error conditions in ipc command Handle error conditions in intel_scu_ipc_command() and pwr_reg_rdwr(). Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 86b6ce2a7a47..e26830f6c8dd 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -235,7 +235,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) } err = busy_loop(); - if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ + if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ /* Workaround: values are read as 0 without memcpy_fromio */ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); for (nc = 0; nc < count; nc++) @@ -465,8 +465,10 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, ipc_command((inlen << 16) | (sub << 12) | cmd); err = busy_loop(); - for (i = 0; i < outlen; i++) - *out++ = ipc_data_readl(4 * i); + if (!err) { + for (i = 0; i < outlen; i++) + *out++ = ipc_data_readl(4 * i); + } mutex_unlock(&ipclock); return err; -- cgit v1.2.3 From ed12f295bfd5c378970106891f12999589aec4e5 Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Fri, 15 Nov 2013 16:21:54 -0800 Subject: ipc: Added support for IPC interrupt mode This patch adds support for ipc command interrupt mode. Also added platform data option to select 'irq_mode' irq_mode = 1: configure the driver to receive IOC interrupt for each successful ipc_command. irq_mode = 0: makes driver use polling method to track the command completion status. Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: David Cohen Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_scu_ipc.c | 48 +++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index e26830f6c8dd..60ea476a9130 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -60,6 +60,7 @@ #define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */ #define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */ +#define IPC_IOC 0x100 /* IPC command register IOC bit */ enum { SCU_IPC_LINCROFT, @@ -74,6 +75,7 @@ struct intel_scu_ipc_pdata_t { u32 i2c_base; u32 ipc_len; u32 i2c_len; + u8 irq_mode; }; static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { @@ -82,24 +84,28 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = { .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 0, }, [SCU_IPC_PENWELL] = { .ipc_base = 0xff11c000, .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 1, }, [SCU_IPC_CLOVERVIEW] = { .ipc_base = 0xff11c000, .i2c_base = 0xff12b000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 1, }, [SCU_IPC_TANGIER] = { .ipc_base = 0xff009000, .i2c_base = 0xff00d000, .ipc_len = 0x100, .i2c_len = 0x10, + .irq_mode = 0, }, }; @@ -110,6 +116,8 @@ struct intel_scu_ipc_dev { struct pci_dev *pdev; void __iomem *ipc_base; void __iomem *i2c_base; + struct completion cmd_complete; + u8 irq_mode; }; static struct intel_scu_ipc_dev ipcdev; /* Only one for now */ @@ -136,6 +144,10 @@ static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */ */ static inline void ipc_command(u32 cmd) /* Send ipc command */ { + if (ipcdev.irq_mode) { + reinit_completion(&ipcdev.cmd_complete); + writel(cmd | IPC_IOC, ipcdev.ipc_base); + } writel(cmd, ipcdev.ipc_base); } @@ -194,6 +206,30 @@ static inline int busy_loop(void) /* Wait till scu status is busy */ return 0; } +/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */ +static inline int ipc_wait_for_interrupt(void) +{ + int status; + + if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) { + struct device *dev = &ipcdev.pdev->dev; + dev_err(dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + + status = ipc_read_status(); + + if ((status >> 1) & 1) + return -EIO; + + return 0; +} + +int intel_scu_ipc_check_status(void) +{ + return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop(); +} + /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) { @@ -234,7 +270,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) ipc_command(4 << 16 | id << 12 | 0 << 8 | op); } - err = busy_loop(); + err = intel_scu_ipc_check_status(); if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ /* Workaround: values are read as 0 without memcpy_fromio */ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); @@ -429,7 +465,7 @@ int intel_scu_ipc_simple_command(int cmd, int sub) return -ENODEV; } ipc_command(sub << 12 | cmd); - err = busy_loop(); + err = intel_scu_ipc_check_status(); mutex_unlock(&ipclock); return err; } @@ -463,7 +499,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, ipc_data_writel(*in++, 4 * i); ipc_command((inlen << 16) | (sub << 12) | cmd); - err = busy_loop(); + err = intel_scu_ipc_check_status(); if (!err) { for (i = 0; i < outlen; i++) @@ -531,6 +567,9 @@ EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); */ static irqreturn_t ioc(int irq, void *dev_id) { + if (ipcdev.irq_mode) + complete(&ipcdev.cmd_complete); + return IRQ_HANDLED; } @@ -555,6 +594,7 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) pdata = &intel_scu_ipc_pdata[pid]; ipcdev.pdev = pci_dev_get(dev); + ipcdev.irq_mode = pdata->irq_mode; err = pci_enable_device(dev); if (err) @@ -568,6 +608,8 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id) if (!pci_resource) return -ENOMEM; + init_completion(&ipcdev.cmd_complete); + if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev)) return -EBUSY; -- cgit v1.2.3 From a80e1053aaa395d94fff5ab7c73c89bb0c28c3c5 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 3 Oct 2013 19:23:36 -0400 Subject: x86, wmi fix modalias_show return values I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick look for other similar errors in the kernel. modalias_show() should return an empty string on error, not errno. Signed-off-by: Prarit Bhargava Cc: Matthew Garrett Signed-off-by: Matthew Garrett --- drivers/platform/x86/wmi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 62e8c221d01e..c2e7b2657aeb 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -672,8 +672,10 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, struct wmi_block *wblock; wblock = dev_get_drvdata(dev); - if (!wblock) - return -ENOMEM; + if (!wblock) { + strcat(buf, "\n"); + return strlen(buf); + } wmi_gtoa(wblock->gblock.guid, guid_string); -- cgit v1.2.3