From 523c5b89640e147abc7c70466f55327df8559d0a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sun, 30 Nov 2014 17:52:32 +0100 Subject: i2c: Remove support for legacy PM There haven't been any I2C driver that use the legacy suspend/resume callbacks for a while now and new drivers are supposed to use PM ops. So remove support for legacy suspend/resume for I2C drivers. Since there aren't any special bus specific things to do during suspend/resume and since the PM core will automatically fallback directly to using the device's PM ops if no bus PM ops are specified there is no need to have any I2C bus PM ops. Signed-off-by: Lars-Peter Clausen Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 118 ------------------------------------------------- include/linux/i2c.h | 4 -- 2 files changed, 122 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 39d25a8cb1ad..393bb0e8c8f2 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -698,101 +698,6 @@ static void i2c_device_shutdown(struct device *dev) driver->shutdown(client); } -#ifdef CONFIG_PM_SLEEP -static int i2c_legacy_suspend(struct device *dev, pm_message_t mesg) -{ - struct i2c_client *client = i2c_verify_client(dev); - struct i2c_driver *driver; - - if (!client || !dev->driver) - return 0; - driver = to_i2c_driver(dev->driver); - if (!driver->suspend) - return 0; - return driver->suspend(client, mesg); -} - -static int i2c_legacy_resume(struct device *dev) -{ - struct i2c_client *client = i2c_verify_client(dev); - struct i2c_driver *driver; - - if (!client || !dev->driver) - return 0; - driver = to_i2c_driver(dev->driver); - if (!driver->resume) - return 0; - return driver->resume(client); -} - -static int i2c_device_pm_suspend(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_suspend(dev); - else - return i2c_legacy_suspend(dev, PMSG_SUSPEND); -} - -static int i2c_device_pm_resume(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_resume(dev); - else - return i2c_legacy_resume(dev); -} - -static int i2c_device_pm_freeze(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_freeze(dev); - else - return i2c_legacy_suspend(dev, PMSG_FREEZE); -} - -static int i2c_device_pm_thaw(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_thaw(dev); - else - return i2c_legacy_resume(dev); -} - -static int i2c_device_pm_poweroff(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_poweroff(dev); - else - return i2c_legacy_suspend(dev, PMSG_HIBERNATE); -} - -static int i2c_device_pm_restore(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_restore(dev); - else - return i2c_legacy_resume(dev); -} -#else /* !CONFIG_PM_SLEEP */ -#define i2c_device_pm_suspend NULL -#define i2c_device_pm_resume NULL -#define i2c_device_pm_freeze NULL -#define i2c_device_pm_thaw NULL -#define i2c_device_pm_poweroff NULL -#define i2c_device_pm_restore NULL -#endif /* !CONFIG_PM_SLEEP */ - static void i2c_client_dev_release(struct device *dev) { kfree(to_i2c_client(dev)); @@ -837,27 +742,12 @@ static const struct attribute_group *i2c_dev_attr_groups[] = { NULL }; -static const struct dev_pm_ops i2c_device_pm_ops = { - .suspend = i2c_device_pm_suspend, - .resume = i2c_device_pm_resume, - .freeze = i2c_device_pm_freeze, - .thaw = i2c_device_pm_thaw, - .poweroff = i2c_device_pm_poweroff, - .restore = i2c_device_pm_restore, - SET_RUNTIME_PM_OPS( - pm_generic_runtime_suspend, - pm_generic_runtime_resume, - NULL - ) -}; - struct bus_type i2c_bus_type = { .name = "i2c", .match = i2c_device_match, .probe = i2c_device_probe, .remove = i2c_device_remove, .shutdown = i2c_device_shutdown, - .pm = &i2c_device_pm_ops, }; EXPORT_SYMBOL_GPL(i2c_bus_type); @@ -1859,14 +1749,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) if (res) return res; - /* Drivers should switch to dev_pm_ops instead. */ - if (driver->suspend) - pr_warn("i2c-core: driver [%s] using legacy suspend method\n", - driver->driver.name); - if (driver->resume) - pr_warn("i2c-core: driver [%s] using legacy resume method\n", - driver->driver.name); - pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); INIT_LIST_HEAD(&driver->clients); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index e3a1721c8354..3090ee6e171d 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -130,8 +130,6 @@ extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, * @probe: Callback for device binding * @remove: Callback for device unbinding * @shutdown: Callback for device shutdown - * @suspend: Callback for device suspend - * @resume: Callback for device resume * @alert: Alert callback, for example for the SMBus alert protocol * @command: Callback for bus-wide signaling (optional) * @driver: Device driver model driver @@ -174,8 +172,6 @@ struct i2c_driver { /* driver model interfaces that don't relate to enumeration */ void (*shutdown)(struct i2c_client *); - int (*suspend)(struct i2c_client *, pm_message_t mesg); - int (*resume)(struct i2c_client *); /* Alert callback, for example for the SMBus alert protocol. * The format and meaning of the data value depends on the protocol. -- cgit v1.2.3 From 1c57499361c403f18e5423969b9aa2446bdbe622 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 8 Jan 2015 20:19:00 +0100 Subject: i2c: pmcmsp: remove dead code CPPCHECK rightfully says: drivers/i2c/busses/i2c-pmcmsp.c:151: style: The function 'pmcmsptwi_reg_to_clock' is never used. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pmcmsp.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index 44f03eed00dd..d37d9db6681e 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -148,13 +148,6 @@ static inline u32 pmcmsptwi_clock_to_reg( return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff); } -static inline void pmcmsptwi_reg_to_clock( - u32 reg, struct pmcmsptwi_clock *clock) -{ - clock->filter = (reg >> 12) & 0xf; - clock->clock = reg & 0x03ff; -} - static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg) { return ((cfg->arbf & 0xf) << 12) | -- cgit v1.2.3 From 9fae82e1acda8d4a6881be63cc38521b84007ba9 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 12 Dec 2014 09:48:26 +0530 Subject: i2c: cadence: Handle > 252 byte transfers The I2C controller sends a NACK to the slave when transfer size register reaches zero, irrespective of the hold bit. So, in order to handle transfers greater than 252 bytes, the transfer size register has to be maintained at a value >= 1. This patch implements the same. The interrupt status is cleared at the beginning of the isr instead of the end, to avoid missing any interrupts. Signed-off-by: Harini Katakam [wsa: added braces around else branch] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 175 +++++++++++++++++++++++---------------- 1 file changed, 102 insertions(+), 73 deletions(-) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 626f74ecd4be..871cb58aaa06 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -128,6 +128,7 @@ * @suspended: Flag holding the device's PM status * @send_count: Number of bytes still expected to send * @recv_count: Number of bytes still expected to receive + * @curr_recv_count: Number of bytes to be received in current transfer * @irq: IRQ number * @input_clk: Input clock to I2C controller * @i2c_clk: Maximum I2C clock speed @@ -146,6 +147,7 @@ struct cdns_i2c { u8 suspended; unsigned int send_count; unsigned int recv_count; + unsigned int curr_recv_count; int irq; unsigned long input_clk; unsigned int i2c_clk; @@ -182,14 +184,15 @@ static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id) */ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) { - unsigned int isr_status, avail_bytes; - unsigned int bytes_to_recv, bytes_to_send; + unsigned int isr_status, avail_bytes, updatetx; + unsigned int bytes_to_send; struct cdns_i2c *id = ptr; /* Signal completion only after everything is updated */ int done_flag = 0; irqreturn_t status = IRQ_NONE; isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET); + cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET); /* Handling nack and arbitration lost interrupt */ if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) { @@ -197,89 +200,112 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) status = IRQ_HANDLED; } - /* Handling Data interrupt */ - if ((isr_status & CDNS_I2C_IXR_DATA) && - (id->recv_count >= CDNS_I2C_DATA_INTR_DEPTH)) { - /* Always read data interrupt threshold bytes */ - bytes_to_recv = CDNS_I2C_DATA_INTR_DEPTH; - id->recv_count -= CDNS_I2C_DATA_INTR_DEPTH; - avail_bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET); - - /* - * if the tranfer size register value is zero, then - * check for the remaining bytes and update the - * transfer size register. - */ - if (!avail_bytes) { - if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) - cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE, - CDNS_I2C_XFER_SIZE_OFFSET); - else - cdns_i2c_writereg(id->recv_count, - CDNS_I2C_XFER_SIZE_OFFSET); - } + /* + * Check if transfer size register needs to be updated again for a + * large data receive operation. + */ + updatetx = 0; + if (id->recv_count > id->curr_recv_count) + updatetx = 1; + + /* When receiving, handle data interrupt and completion interrupt */ + if (id->p_recv_buf && + ((isr_status & CDNS_I2C_IXR_COMP) || + (isr_status & CDNS_I2C_IXR_DATA))) { + /* Read data if receive data valid is set */ + while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & + CDNS_I2C_SR_RXDV) { + /* + * Clear hold bit that was set for FIFO control if + * RX data left is less than FIFO depth, unless + * repeated start is selected. + */ + if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) && + !id->bus_hold_flag) + cdns_i2c_clear_bus_hold(id); - /* Process the data received */ - while (bytes_to_recv--) *(id->p_recv_buf)++ = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET); + id->recv_count--; + id->curr_recv_count--; - if (!id->bus_hold_flag && - (id->recv_count <= CDNS_I2C_FIFO_DEPTH)) - cdns_i2c_clear_bus_hold(id); + if (updatetx && + (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) + break; + } - status = IRQ_HANDLED; - } + /* + * The controller sends NACK to the slave when transfer size + * register reaches zero without considering the HOLD bit. + * This workaround is implemented for large data transfers to + * maintain transfer size non-zero while performing a large + * receive operation. + */ + if (updatetx && + (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) { + /* wait while fifo is full */ + while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) != + (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH)) + ; - /* Handling Transfer Complete interrupt */ - if (isr_status & CDNS_I2C_IXR_COMP) { - if (!id->p_recv_buf) { /* - * If the device is sending data If there is further - * data to be sent. Calculate the available space - * in FIFO and fill the FIFO with that many bytes. + * Check number of bytes to be received against maximum + * transfer size and update register accordingly. */ - if (id->send_count) { - avail_bytes = CDNS_I2C_FIFO_DEPTH - - cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET); - if (id->send_count > avail_bytes) - bytes_to_send = avail_bytes; - else - bytes_to_send = id->send_count; - - while (bytes_to_send--) { - cdns_i2c_writereg( - (*(id->p_send_buf)++), - CDNS_I2C_DATA_OFFSET); - id->send_count--; - } + if (((int)(id->recv_count) - CDNS_I2C_FIFO_DEPTH) > + CDNS_I2C_TRANSFER_SIZE) { + cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE, + CDNS_I2C_XFER_SIZE_OFFSET); + id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE + + CDNS_I2C_FIFO_DEPTH; } else { - /* - * Signal the completion of transaction and - * clear the hold bus bit if there are no - * further messages to be processed. - */ - done_flag = 1; + cdns_i2c_writereg(id->recv_count - + CDNS_I2C_FIFO_DEPTH, + CDNS_I2C_XFER_SIZE_OFFSET); + id->curr_recv_count = id->recv_count; } - if (!id->send_count && !id->bus_hold_flag) - cdns_i2c_clear_bus_hold(id); - } else { + } + + /* Clear hold (if not repeated start) and signal completion */ + if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) { if (!id->bus_hold_flag) cdns_i2c_clear_bus_hold(id); + done_flag = 1; + } + + status = IRQ_HANDLED; + } + + /* When sending, handle transfer complete interrupt */ + if ((isr_status & CDNS_I2C_IXR_COMP) && !id->p_recv_buf) { + /* + * If there is more data to be sent, calculate the + * space available in FIFO and fill with that many bytes. + */ + if (id->send_count) { + avail_bytes = CDNS_I2C_FIFO_DEPTH - + cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET); + if (id->send_count > avail_bytes) + bytes_to_send = avail_bytes; + else + bytes_to_send = id->send_count; + + while (bytes_to_send--) { + cdns_i2c_writereg( + (*(id->p_send_buf)++), + CDNS_I2C_DATA_OFFSET); + id->send_count--; + } + } else { /* - * If the device is receiving data, then signal - * the completion of transaction and read the data - * present in the FIFO. Signal the completion of - * transaction. + * Signal the completion of transaction and + * clear the hold bus bit if there are no + * further messages to be processed. */ - while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & - CDNS_I2C_SR_RXDV) { - *(id->p_recv_buf)++ = - cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET); - id->recv_count--; - } done_flag = 1; } + if (!id->send_count && !id->bus_hold_flag) + cdns_i2c_clear_bus_hold(id); status = IRQ_HANDLED; } @@ -289,8 +315,6 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) if (id->err_status) status = IRQ_HANDLED; - cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET); - if (done_flag) complete(&id->xfer_done); @@ -316,6 +340,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) if (id->p_msg->flags & I2C_M_RECV_LEN) id->recv_count = I2C_SMBUS_BLOCK_MAX + 1; + id->curr_recv_count = id->recv_count; + /* * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. @@ -335,11 +361,14 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * receive if it is less than transfer size and transfer size if * it is more. Enable the interrupts. */ - if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) + if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) { cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE, CDNS_I2C_XFER_SIZE_OFFSET); - else + id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE; + } else { cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET); + } + /* Clear the bus hold flag if bytes to receive is less than FIFO size */ if (!id->bus_hold_flag && ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) && -- cgit v1.2.3 From 1330e29105a3ad0a2a88d7a37ddd29d3f70675cf Mon Sep 17 00:00:00 2001 From: addy ke Date: Thu, 11 Dec 2014 19:02:40 +0800 Subject: i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification The number of clock cycles to be written into the CLKDIV register that determines the I2C clk high phase includes the rise time. So to meet the timing requirements defined in the I2C specification which defines the minimal time SCL has to be high, the rise time has to taken into account. The same applies to the low phase with falling time. In my test on RK3288-Pink2 board, which is not an upstream board yet, if external pull-up resistor is 4.7K, rise_ns is about 700ns. So the measured high_ns is about 3900ns, which is less than 4000ns (the minimum high_ns in I2C specification for Standard-mode). To fix this bug min_low_ns should include fall time and min_high_ns should include rise time. This patch merged the patch from chromium project which can get the rise and fall times for signals from the device tree. This allows us to more accurately calculate timings. see: https://chromium-review.googlesource.com/#/c/232774/ Signed-off-by: Addy Ke Reviewed-by: Doug Anderson Tested-by: Doug Anderson [wsa: fixed a typo in the docs] Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 11 ++++ drivers/i2c/busses/i2c-rk3x.c | 72 +++++++++++++++------- 2 files changed, 60 insertions(+), 23 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt index dde6c22ce91a..c4fd545720af 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt @@ -21,6 +21,14 @@ Required on RK3066, RK3188 : Optional properties : - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used. + - i2c-scl-rising-time-ns : Number of nanoseconds the signal takes to rise + (t(r) in I2C specification). If not specified this is assumed to be + the maximum the specification allows(1000 ns for Standard-mode, + 300 ns for Fast-mode) which might cause slightly slower communication. + - i2c-scl-falling-time-ns : Number of nanoseconds the signal takes to fall + (t(f) in the I2C specification). If not specified this is assumed to + be the maximum the specification allows (300 ns) which might cause + slightly slower communication. Example: @@ -39,4 +47,7 @@ i2c0: i2c@2002d000 { clock-names = "i2c"; clocks = <&cru PCLK_I2C0>; + + i2c-scl-rising-time-ns = <800>; + i2c-scl-falling-time-ns = <100>; }; diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 92462843db66..36a922445814 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -102,6 +102,8 @@ struct rk3x_i2c { /* Settings */ unsigned int scl_frequency; + unsigned int rise_ns; + unsigned int fall_ns; /* Synchronization & notification */ spinlock_t lock; @@ -435,6 +437,8 @@ out: * * @clk_rate: I2C input clock rate * @scl_rate: Desired SCL rate + * @rise_ns: How many ns it takes for signals to rise. + * @fall_ns: How many ns it takes for signals to fall. * @div_low: Divider output for low * @div_high: Divider output for high * @@ -443,11 +447,14 @@ out: * too high, we silently use the highest possible rate. */ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, + unsigned long rise_ns, unsigned long fall_ns, unsigned long *div_low, unsigned long *div_high) { - unsigned long min_low_ns, min_high_ns; - unsigned long max_data_hold_ns; + unsigned long spec_min_low_ns, spec_min_high_ns; + unsigned long spec_max_data_hold_ns; unsigned long data_hold_buffer_ns; + + unsigned long min_low_ns, min_high_ns; unsigned long max_low_ns, min_total_ns; unsigned long clk_rate_khz, scl_rate_khz; @@ -469,29 +476,33 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, scl_rate = 1000; /* - * min_low_ns: The minimum number of ns we need to hold low - * to meet i2c spec - * min_high_ns: The minimum number of ns we need to hold high - * to meet i2c spec - * max_low_ns: The maximum number of ns we can hold low - * to meet i2c spec + * min_low_ns: The minimum number of ns we need to hold low to + * meet I2C specification, should include fall time. + * min_high_ns: The minimum number of ns we need to hold high to + * meet I2C specification, should include rise time. + * max_low_ns: The maximum number of ns we can hold low to meet + * I2C specification. * - * Note: max_low_ns should be (max data hold time * 2 - buffer) + * Note: max_low_ns should be (maximum data hold time * 2 - buffer) * This is because the i2c host on Rockchip holds the data line * for half the low time. */ if (scl_rate <= 100000) { - min_low_ns = 4700; - min_high_ns = 4000; - max_data_hold_ns = 3450; + /* Standard-mode */ + spec_min_low_ns = 4700; + spec_min_high_ns = 4000; + spec_max_data_hold_ns = 3450; data_hold_buffer_ns = 50; } else { - min_low_ns = 1300; - min_high_ns = 600; - max_data_hold_ns = 900; + /* Fast-mode */ + spec_min_low_ns = 1300; + spec_min_high_ns = 600; + spec_max_data_hold_ns = 900; data_hold_buffer_ns = 50; } - max_low_ns = max_data_hold_ns * 2 - data_hold_buffer_ns; + min_low_ns = spec_min_low_ns + fall_ns; + min_high_ns = spec_min_high_ns + rise_ns; + max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns; min_total_ns = min_low_ns + min_high_ns; /* Adjust to avoid overflow */ @@ -510,8 +521,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, min_div_for_hold = (min_low_div + min_high_div); /* - * This is the maximum divider so we don't go over the max. - * We don't round up here (we round down) since this is a max. + * This is the maximum divider so we don't go over the maximum. + * We don't round up here (we round down) since this is a maximum. */ max_low_div = clk_rate_khz * max_low_ns / (8 * 1000000); @@ -544,7 +555,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, ideal_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, scl_rate_khz * 8 * min_total_ns); - /* Don't allow it to go over the max */ + /* Don't allow it to go over the maximum */ if (ideal_low_div > max_low_div) ideal_low_div = max_low_div; @@ -588,8 +599,8 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) u64 t_low_ns, t_high_ns; int ret; - ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, &div_low, - &div_high); + ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->rise_ns, + i2c->fall_ns, &div_low, &div_high); WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency); @@ -633,9 +644,9 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long switch (event) { case PRE_RATE_CHANGE: if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency, - &div_low, &div_high) != 0) { + i2c->rise_ns, i2c->fall_ns, &div_low, + &div_high) != 0) return NOTIFY_STOP; - } /* scale up */ if (ndata->new_rate > ndata->old_rate) @@ -859,6 +870,21 @@ static int rk3x_i2c_probe(struct platform_device *pdev) i2c->scl_frequency = DEFAULT_SCL_RATE; } + /* + * Read rise and fall time from device tree. If not available use + * the default maximum timing from the specification. + */ + if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-rising-time-ns", + &i2c->rise_ns)) { + if (i2c->scl_frequency <= 100000) + i2c->rise_ns = 1000; + else + i2c->rise_ns = 300; + } + if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", + &i2c->fall_ns)) + i2c->fall_ns = 300; + strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; i2c->adap.algo = &rk3x_i2c_algorithm; -- cgit v1.2.3 From 387f0de6c37380ad72bb92bb621f23555dd4c42e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 18 Dec 2014 09:44:07 -0800 Subject: i2c: rk3x: Account for repeated start time requirement On Rockchip I2C the controller drops SDA low slightly too soon to meet the "repeated start" requirements. >From my own experimentation over a number of rates: - controller appears to drop SDA at .875x (7/8) programmed clk high. - controller appears to keep SCL high for 2x programmed clk high. The first rule isn't enough to meet tSU;STA requirements in Standard-mode on the system I tested on. The second rule is probably enough to meet tHD;STA requirements in nearly all cases (especially after accounting for the first), but it doesn't hurt to account for it anyway just in case. Even though the repeated start requirement only need to be accounted for during a small part of the transfer, we'll adjust the timings for the whole transfer to meet it. I believe that adjusting the timings in just the right place to switch things up for repeated start would require several extra interrupts and that doesn't seem terribly worth it. With this change and worst case rise/fall times, I see 100kHz i2c going to ~85kHz. With slightly optimized rise/fall (800ns / 50ns) I see i2c going to ~89kHz. Fast-mode isn't affected much because tSU;STA is shorter relative to tHD;STA there. As part of this change we needed to account for the SDA falling time. The specification indicates that this should be the same, but we'll follow Designware's lead and add a binding. Note that we deviate from Designware and assign the default SDA falling time to be the same as the SCL falling time, which is incredibly likely. Signed-off-by: Doug Anderson [wsa: rebased to i2c/for-next] Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 7 ++- drivers/i2c/busses/i2c-rk3x.c | 61 +++++++++++++++------- 2 files changed, 48 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt index c4fd545720af..f0d71bc52e64 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt @@ -21,14 +21,17 @@ Required on RK3066, RK3188 : Optional properties : - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used. - - i2c-scl-rising-time-ns : Number of nanoseconds the signal takes to rise + - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise (t(r) in I2C specification). If not specified this is assumed to be the maximum the specification allows(1000 ns for Standard-mode, 300 ns for Fast-mode) which might cause slightly slower communication. - - i2c-scl-falling-time-ns : Number of nanoseconds the signal takes to fall + - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall (t(f) in the I2C specification). If not specified this is assumed to be the maximum the specification allows (300 ns) which might cause slightly slower communication. + - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall + (t(f) in the I2C specification). If not specified we'll use the SCL + value since they are the same in nearly all cases. Example: diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 36a922445814..5f96b1b3e3a5 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -102,8 +102,9 @@ struct rk3x_i2c { /* Settings */ unsigned int scl_frequency; - unsigned int rise_ns; - unsigned int fall_ns; + unsigned int scl_rise_ns; + unsigned int scl_fall_ns; + unsigned int sda_fall_ns; /* Synchronization & notification */ spinlock_t lock; @@ -437,8 +438,9 @@ out: * * @clk_rate: I2C input clock rate * @scl_rate: Desired SCL rate - * @rise_ns: How many ns it takes for signals to rise. - * @fall_ns: How many ns it takes for signals to fall. + * @scl_rise_ns: How many ns it takes for SCL to rise. + * @scl_fall_ns: How many ns it takes for SCL to fall. + * @sda_fall_ns: How many ns it takes for SDA to fall. * @div_low: Divider output for low * @div_high: Divider output for high * @@ -447,11 +449,13 @@ out: * too high, we silently use the highest possible rate. */ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, - unsigned long rise_ns, unsigned long fall_ns, + unsigned long scl_rise_ns, + unsigned long scl_fall_ns, + unsigned long sda_fall_ns, unsigned long *div_low, unsigned long *div_high) { unsigned long spec_min_low_ns, spec_min_high_ns; - unsigned long spec_max_data_hold_ns; + unsigned long spec_setup_start, spec_max_data_hold_ns; unsigned long data_hold_buffer_ns; unsigned long min_low_ns, min_high_ns; @@ -490,18 +494,35 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate, if (scl_rate <= 100000) { /* Standard-mode */ spec_min_low_ns = 4700; + spec_setup_start = 4700; spec_min_high_ns = 4000; spec_max_data_hold_ns = 3450; data_hold_buffer_ns = 50; } else { /* Fast-mode */ spec_min_low_ns = 1300; + spec_setup_start = 600; spec_min_high_ns = 600; spec_max_data_hold_ns = 900; data_hold_buffer_ns = 50; } - min_low_ns = spec_min_low_ns + fall_ns; - min_high_ns = spec_min_high_ns + rise_ns; + min_high_ns = scl_rise_ns + spec_min_high_ns; + + /* + * Timings for repeated start: + * - controller appears to drop SDA at .875x (7/8) programmed clk high. + * - controller appears to keep SCL high for 2x programmed clk high. + * + * We need to account for those rules in picking our "high" time so + * we meet tSU;STA and tHD;STA times. + */ + min_high_ns = max(min_high_ns, + DIV_ROUND_UP((scl_rise_ns + spec_setup_start) * 1000, 875)); + min_high_ns = max(min_high_ns, + DIV_ROUND_UP((scl_rise_ns + spec_setup_start + + sda_fall_ns + spec_min_high_ns), 2)); + + min_low_ns = scl_fall_ns + spec_min_low_ns; max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns; min_total_ns = min_low_ns + min_high_ns; @@ -599,9 +620,9 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) u64 t_low_ns, t_high_ns; int ret; - ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->rise_ns, - i2c->fall_ns, &div_low, &div_high); - + ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns, + i2c->scl_fall_ns, i2c->sda_fall_ns, + &div_low, &div_high); WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency); clk_enable(i2c->clk); @@ -644,8 +665,9 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long switch (event) { case PRE_RATE_CHANGE: if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency, - i2c->rise_ns, i2c->fall_ns, &div_low, - &div_high) != 0) + i2c->scl_rise_ns, i2c->scl_fall_ns, + i2c->sda_fall_ns, + &div_low, &div_high) != 0) return NOTIFY_STOP; /* scale up */ @@ -875,15 +897,18 @@ static int rk3x_i2c_probe(struct platform_device *pdev) * the default maximum timing from the specification. */ if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-rising-time-ns", - &i2c->rise_ns)) { + &i2c->scl_rise_ns)) { if (i2c->scl_frequency <= 100000) - i2c->rise_ns = 1000; + i2c->scl_rise_ns = 1000; else - i2c->rise_ns = 300; + i2c->scl_rise_ns = 300; } if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", - &i2c->fall_ns)) - i2c->fall_ns = 300; + &i2c->scl_fall_ns)) + i2c->scl_fall_ns = 300; + if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", + &i2c->scl_fall_ns)) + i2c->sda_fall_ns = i2c->scl_fall_ns; strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; -- cgit v1.2.3 From cb9eaba4c5dc16b4c00d7a86e4f5636c4edf964c Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Sat, 27 Dec 2014 08:33:53 -0500 Subject: i2c: imx: fix handling of wait_for_completion_timeout result wait_for_completion_timeout does not return negative values so "result" handling here should be simplified to cover the actually possible cases only. Signed-off-by: Nicholas Mc Guire Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 7f3a9fe9bf4e..2be7d9d6d1b3 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -628,9 +628,9 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, result = wait_for_completion_timeout( &i2c_imx->dma->cmd_complete, msecs_to_jiffies(DMA_TIMEOUT)); - if (result <= 0) { + if (result == 0) { dmaengine_terminate_all(dma->chan_using); - return result ?: -ETIMEDOUT; + return -ETIMEDOUT; } /* Waiting for transfer complete. */ @@ -686,9 +686,9 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, result = wait_for_completion_timeout( &i2c_imx->dma->cmd_complete, msecs_to_jiffies(DMA_TIMEOUT)); - if (result <= 0) { + if (result == 0) { dmaengine_terminate_all(dma->chan_using); - return result ?: -ETIMEDOUT; + return -ETIMEDOUT; } /* waiting for transfer complete. */ -- cgit v1.2.3 From ef2829144dc995d8263dbec3b057a29541e789b4 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 16 Dec 2014 22:19:53 +0100 Subject: dt-bindings: use isil prefix for Intersil in I2C trivial-devices.txt This patch fixes I2C trivial-devices.txt DT documentation file to reference isil (NASDAQ symbol and the most used prefix inside the kernel) for Intersil. It reverts 7c75c1d5e72b ("dt-bindings: Document deprecated device vendor name to fix related warning"). Signed-off-by: Arnaud Ebalard Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 9f4e3824e71e..55b8cd396d43 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -58,9 +58,8 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) -isl,isl12057 Intersil ISL12057 I2C RTC Chip -isil,isl29028 (deprecated, use isl) -isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor +isil,isl12057 Intersil ISL12057 I2C RTC Chip +isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -- cgit v1.2.3 From 8a86c3aee0cfec09b35159da9d925157f3e4f2cc Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Wed, 14 Jan 2015 00:04:59 +0530 Subject: i2c: cadence: Check for errata condition involving master receive Cadence I2C controller has the following bugs: - completion indication is not given to the driver at the end of a read/receive transfer with HOLD bit set. - Invalid read transaction are generated on the bus when HW timeout condition occurs with HOLD bit set. As a result of the above, if a set of messages to be transferred with repeated start includes any message following a read message, completion is never indicated and timeout occurs. Hence a check is implemented to return -EOPNOTSUPP for such sequences. Signed-off-by: Harini Katakam Signed-off-by: Vishnu Motghare [wsa: fixed some whitespaces] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 871cb58aaa06..7d7a14cdadfb 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -545,6 +545,20 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, * processed with a repeated start. */ if (num > 1) { + /* + * This controller does not give completion interrupt after a + * master receive message if HOLD bit is set (repeated start), + * resulting in SW timeout. Hence, if a receive message is + * followed by any other message, an error is returned + * indicating that this sequence is not supported. + */ + for (count = 0; count < num - 1; count++) { + if (msgs[count].flags & I2C_M_RD) { + dev_warn(adap->dev.parent, + "Can't do repeated start after a receive message\n"); + return -EOPNOTSUPP; + } + } id->bus_hold_flag = 1; reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET); reg |= CDNS_I2C_CR_HOLD; -- cgit v1.2.3 From 393cc1ceb96648f842eb81f41f8f56d1eba9b637 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 29 Dec 2014 15:48:48 +0200 Subject: i2c: ACPI: Pick the first address if device has multiple ACPI specification allows I2C devices with multiple addresses. The current implementation goes over all addresses and assigns the last one to the device. This is typically not the primary address of the device. Instead of doing that we assign the first address to the device and then let the driver handle rest of the addresses as it wishes. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 393bb0e8c8f2..79ac8605936d 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -102,7 +102,7 @@ static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) struct acpi_resource_i2c_serialbus *sb; sb = &ares->data.i2c_serial_bus; - if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { + if (!info->addr && sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { info->addr = sb->slave_address; if (sb->access_mode == ACPI_I2C_10BIT_MODE) info->flags |= I2C_CLIENT_TEN; -- cgit v1.2.3 From 90ebd0eb065168995ab400266934bf5ed498c5ae Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 6 Jan 2015 15:48:20 +0100 Subject: i2c: imx: remove unused return value assignments The ret variable is set and never used in the error path of i2c_imx_dma_request. Signed-off-by: Philipp Zabel Acked-by: Fugang Duan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 2be7d9d6d1b3..cb7c4b28b624 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -295,7 +295,6 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma->chan_tx = dma_request_slave_channel(dev, "tx"); if (!dma->chan_tx) { dev_dbg(dev, "can't request DMA tx channel\n"); - ret = -ENODEV; goto fail_al; } @@ -313,7 +312,6 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma->chan_rx = dma_request_slave_channel(dev, "rx"); if (!dma->chan_rx) { dev_dbg(dev, "can't request DMA rx channel\n"); - ret = -ENODEV; goto fail_tx; } -- cgit v1.2.3 From a5eb71b207ecefac07bc36fd50b43d83c047b0ce Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 19 Jan 2015 20:12:24 +0100 Subject: i2c: simplify boilerplate code for attribute groups Declaring attribute groups can be done with macros these days, let's use them for consistency and readability reasons. Also, put the ATTR macros directly below the referenced functions while we are here. Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 79ac8605936d..7730a68fa2d0 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -709,6 +709,7 @@ show_name(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%s\n", dev->type == &i2c_client_type ? to_i2c_client(dev)->name : to_i2c_adapter(dev)->name); } +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf) @@ -722,8 +723,6 @@ show_modalias(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name); } - -static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); static struct attribute *i2c_dev_attrs[] = { @@ -732,15 +731,7 @@ static struct attribute *i2c_dev_attrs[] = { &dev_attr_modalias.attr, NULL }; - -static struct attribute_group i2c_dev_attr_group = { - .attrs = i2c_dev_attrs, -}; - -static const struct attribute_group *i2c_dev_attr_groups[] = { - &i2c_dev_attr_group, - NULL -}; +ATTRIBUTE_GROUPS(i2c_dev); struct bus_type i2c_bus_type = { .name = "i2c", @@ -752,7 +743,7 @@ struct bus_type i2c_bus_type = { EXPORT_SYMBOL_GPL(i2c_bus_type); static struct device_type i2c_client_type = { - .groups = i2c_dev_attr_groups, + .groups = i2c_dev_groups, .uevent = i2c_device_uevent, .release = i2c_client_dev_release, }; @@ -1151,6 +1142,7 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr, return count; } +static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device); /* * And of course let the users delete the devices they instantiated, if @@ -1205,8 +1197,6 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, "delete_device"); return res; } - -static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device); static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device); @@ -1216,18 +1206,10 @@ static struct attribute *i2c_adapter_attrs[] = { &dev_attr_delete_device.attr, NULL }; - -static struct attribute_group i2c_adapter_attr_group = { - .attrs = i2c_adapter_attrs, -}; - -static const struct attribute_group *i2c_adapter_attr_groups[] = { - &i2c_adapter_attr_group, - NULL -}; +ATTRIBUTE_GROUPS(i2c_adapter); struct device_type i2c_adapter_type = { - .groups = i2c_adapter_attr_groups, + .groups = i2c_adapter_groups, .release = i2c_adapter_dev_release, }; EXPORT_SYMBOL_GPL(i2c_adapter_type); -- cgit v1.2.3 From 4e355f5128ff5f340b5de49015d4a25d9c6b38c4 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 22 Jan 2015 16:17:29 +0100 Subject: i2c: imx: whitespace and checkpatch cleanup This patch fixes up some whitespace issues and addresses a few checkpatch warnings. Signed-off-by: Philipp Zabel Acked-by: Fugang Duan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index cb7c4b28b624..d7b26fc6f432 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -201,7 +201,7 @@ struct imx_i2c_struct { void __iomem *base; wait_queue_head_t queue; unsigned long i2csr; - unsigned int disable_delay; + unsigned int disable_delay; int stopped; unsigned int ifdr; /* IMX_I2C_IFDR */ unsigned int cur_clk; @@ -479,8 +479,8 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx) i2c_clk_rate = clk_get_rate(i2c_imx->clk); if (i2c_imx->cur_clk == i2c_clk_rate) return; - else - i2c_imx->cur_clk = i2c_clk_rate; + + i2c_imx->cur_clk = i2c_clk_rate; div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate; if (div < i2c_clk_div[0].div) @@ -488,7 +488,8 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx) else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div) i = i2c_imx->hwdata->ndivs - 1; else - for (i = 0; i2c_clk_div[i].div < div; i++); + for (i = 0; i2c_clk_div[i].div < div; i++) + ; /* Store divider value */ i2c_imx->ifdr = i2c_clk_div[i].val; @@ -820,6 +821,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo /* read data */ for (i = 0; i < msgs->len; i++) { u8 len = 0; + result = i2c_imx_trx_complete(i2c_imx); if (result) return result; @@ -915,15 +917,16 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, /* write/read data */ #ifdef CONFIG_I2C_DEBUG_BUS temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); - dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, " - "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__, + dev_dbg(&i2c_imx->adapter.dev, + "<%s> CONTROL: IEN=%d, IIEN=%d, MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", + __func__, (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0), (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0), (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0)); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); dev_dbg(&i2c_imx->adapter.dev, - "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, " - "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__, + "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", + __func__, (temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0), (temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0), (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0), @@ -1002,7 +1005,7 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx->adapter.owner = THIS_MODULE; i2c_imx->adapter.algo = &i2c_imx_algo; i2c_imx->adapter.dev.parent = &pdev->dev; - i2c_imx->adapter.nr = pdev->id; + i2c_imx->adapter.nr = pdev->id; i2c_imx->adapter.dev.of_node = pdev->dev.of_node; i2c_imx->base = base; @@ -1061,7 +1064,7 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx->adapter.name); dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); - /* Init DMA config if support*/ + /* Init DMA config if supported */ i2c_imx_dma_request(i2c_imx, phy_addr); return 0; /* Return OK */ -- cgit v1.2.3 From bd1179fd5626f84d0ba177fdfb2e2bb1ced4c996 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 23 Jan 2015 13:54:02 +0200 Subject: i2c: designware-pci: remove Moorestown support The Moorestown support bits were removed few years ago. This is a follow up to that changes. Suggested-by: David Cohen Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-pcidrv.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index acb40f95db78..5c6fca70fb76 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -40,10 +40,6 @@ #define DRIVER_NAME "i2c-designware-pci" enum dw_pci_ctl_id_t { - moorestown_0, - moorestown_1, - moorestown_2, - medfield_0, medfield_1, medfield_2, @@ -102,27 +98,6 @@ static struct dw_scl_sda_cfg hsw_config = { }; static struct dw_pci_controller dw_pci_controllers[] = { - [moorestown_0] = { - .bus_num = 0, - .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, - .tx_fifo_depth = 32, - .rx_fifo_depth = 32, - .clk_khz = 25000, - }, - [moorestown_1] = { - .bus_num = 1, - .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, - .tx_fifo_depth = 32, - .rx_fifo_depth = 32, - .clk_khz = 25000, - }, - [moorestown_2] = { - .bus_num = 2, - .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, - .tx_fifo_depth = 32, - .rx_fifo_depth = 32, - .clk_khz = 25000, - }, [medfield_0] = { .bus_num = 0, .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, @@ -325,10 +300,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) MODULE_ALIAS("i2c_designware-pci"); static const struct pci_device_id i2_designware_pci_ids[] = { - /* Moorestown */ - { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 }, - { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 }, - { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 }, /* Medfield */ { PCI_VDEVICE(INTEL, 0x0817), medfield_3,}, { PCI_VDEVICE(INTEL, 0x0818), medfield_4 }, -- cgit v1.2.3 From c99d49a964c700ad0bab5c54e2f559fce0487fad Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 23 Jan 2015 13:54:04 +0200 Subject: i2c: designware-pci: no need to provide clk_khz The clk_khz field makes sense only if SS counters are not provided. Since we provide them for Haswell and Baytrail explicitly we may omit the clk_khz parameter. Reviewed-by: Jarkko Nikula Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 5c6fca70fb76..87f51f50985d 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -145,7 +145,6 @@ static struct dw_pci_controller dw_pci_controllers[] = { .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, .tx_fifo_depth = 32, .rx_fifo_depth = 32, - .clk_khz = 100000, .functionality = I2C_FUNC_10BIT_ADDR, .scl_sda_cfg = &byt_config, }, @@ -154,7 +153,6 @@ static struct dw_pci_controller dw_pci_controllers[] = { .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, .tx_fifo_depth = 32, .rx_fifo_depth = 32, - .clk_khz = 100000, .functionality = I2C_FUNC_10BIT_ADDR, .scl_sda_cfg = &hsw_config, }, -- cgit v1.2.3 From 67105c5a94fbff6cc3a47e3ba65bacb3c706c5e6 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Thu, 11 Dec 2014 14:26:41 +0800 Subject: i2c: designware: use {readl|writel}_relaxed instead of readl/writel readl/writel is too expensive especially on Cortex A9 w/ outer L2 cache. This introduces i2c read/write delays on Marvell BG2/BG2Q SoCs when there are heavy L2 cache maintenance operations at the same time. The driver does not perform DMA, so it's safe to use the relaxed version. From another side, the relaxed io accessor macros are available on all architectures now, so we can use the relaxed versions instead. Signed-off-by: Jisheng Zhang Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 23628b7bfb8d..e2799483dc45 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -170,10 +170,10 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset) u32 value; if (dev->accessor_flags & ACCESS_16BIT) - value = readw(dev->base + offset) | - (readw(dev->base + offset + 2) << 16); + value = readw_relaxed(dev->base + offset) | + (readw_relaxed(dev->base + offset + 2) << 16); else - value = readl(dev->base + offset); + value = readl_relaxed(dev->base + offset); if (dev->accessor_flags & ACCESS_SWAP) return swab32(value); @@ -187,10 +187,10 @@ void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) b = swab32(b); if (dev->accessor_flags & ACCESS_16BIT) { - writew((u16)b, dev->base + offset); - writew((u16)(b >> 16), dev->base + offset + 2); + writew_relaxed((u16)b, dev->base + offset); + writew_relaxed((u16)(b >> 16), dev->base + offset + 2); } else { - writel(b, dev->base + offset); + writel_relaxed(b, dev->base + offset); } } -- cgit v1.2.3 From 72f0271576eeef40c81c2949e0a8abeaef9a7690 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 23 Jan 2015 16:41:29 +0100 Subject: of: i2c: Add i2c-mux-idle-disconnect DT property to PCA954x mux driver Add i2c-mux-idle-disconnect device tree property to PCA954x mux driver. The new property forces the multiplexer to disconnect child buses in idle state. This is used, for example, when there are several multiplexers on the same bus and the devices on the underlying buses might have same I2C addresses. Signed-off-by: Alexander Sverdlin [wsa: added a newline] Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 3 +++ drivers/i2c/muxes/i2c-mux-pca954x.c | 11 ++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index 34a3fb6f8488..cf53d5fba20a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -16,6 +16,9 @@ Required Properties: Optional Properties: - reset-gpios: Reference to the GPIO connected to the reset input. + - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all + children in idle state. This is necessary for example, if there are several + multiplexers on the bus and the devices behind them use same I2C addresses. Example: diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index ec11b404b433..3d8f4fe2e47e 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -186,6 +187,8 @@ static int pca954x_probe(struct i2c_client *client, { struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); + struct device_node *of_node = client->dev.of_node; + bool idle_disconnect_dt; struct gpio_desc *gpio; int num, force, class; struct pca954x *data; @@ -217,8 +220,13 @@ static int pca954x_probe(struct i2c_client *client, data->type = id->driver_data; data->last_chan = 0; /* force the first selection */ + idle_disconnect_dt = of_node && + of_property_read_bool(of_node, "i2c-mux-idle-disconnect"); + /* Now create an adapter for each channel */ for (num = 0; num < chips[data->type].nchans; num++) { + bool idle_disconnect_pd = false; + force = 0; /* dynamic adap number */ class = 0; /* no class by default */ if (pdata) { @@ -229,12 +237,13 @@ static int pca954x_probe(struct i2c_client *client, } else /* discard unconfigured channels */ break; + idle_disconnect_pd = pdata->modes[num].deselect_on_exit; } data->virt_adaps[num] = i2c_add_mux_adapter(adap, &client->dev, client, force, num, class, pca954x_select_chan, - (pdata && pdata->modes[num].deselect_on_exit) + (idle_disconnect_pd || idle_disconnect_dt) ? pca954x_deselect_mux : NULL); if (data->virt_adaps[num] == NULL) { -- cgit v1.2.3 From c0601d285efe063def984f91b04de2d227f89526 Mon Sep 17 00:00:00 2001 From: David Box Date: Thu, 15 Jan 2015 01:12:16 -0800 Subject: i2c: designware: Add i2c bus locking support Adds support for acquiring and releasing a hardware bus lock in the i2c designware core transfer function. This is needed for i2c bus controllers that are shared with but not controlled by the kernel. Signed-off-by: David E. Box Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 26 ++++++++++++++++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 6 ++++++ 2 files changed, 32 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index e2799483dc45..fbb48fb138e7 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -285,6 +285,15 @@ int i2c_dw_init(struct dw_i2c_dev *dev) u32 hcnt, lcnt; u32 reg; u32 sda_falling_time, scl_falling_time; + int ret; + + if (dev->acquire_lock) { + ret = dev->acquire_lock(dev); + if (ret) { + dev_err(dev->dev, "couldn't acquire bus ownership\n"); + return ret; + } + } input_clock_khz = dev->get_clk_rate_khz(dev); @@ -298,6 +307,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev) } else if (reg != DW_IC_COMP_TYPE_VALUE) { dev_err(dev->dev, "Unknown Synopsys component type: " "0x%08x\n", reg); + if (dev->release_lock) + dev->release_lock(dev); return -ENODEV; } @@ -364,6 +375,9 @@ int i2c_dw_init(struct dw_i2c_dev *dev) /* configure the i2c master */ dw_writel(dev, dev->master_cfg , DW_IC_CON); + + if (dev->release_lock) + dev->release_lock(dev); return 0; } EXPORT_SYMBOL_GPL(i2c_dw_init); @@ -627,6 +641,14 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev->abort_source = 0; dev->rx_outstanding = 0; + if (dev->acquire_lock) { + ret = dev->acquire_lock(dev); + if (ret) { + dev_err(dev->dev, "couldn't acquire bus ownership\n"); + goto done_nolock; + } + } + ret = i2c_dw_wait_bus_not_busy(dev); if (ret < 0) goto done; @@ -672,6 +694,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) ret = -EIO; done: + if (dev->release_lock) + dev->release_lock(dev); + +done_nolock: pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); mutex_unlock(&dev->lock); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 5a410ef17abd..ef8ba839e2d3 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -61,6 +61,9 @@ * @ss_lcnt: standard speed LCNT value * @fs_hcnt: fast speed HCNT value * @fs_lcnt: fast speed LCNT value + * @acquire_lock: function to acquire a hardware lock on the bus + * @release_lock: function to release a hardware lock on the bus + * @pm_runtime_disabled: true if pm runtime is disabled * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -101,6 +104,9 @@ struct dw_i2c_dev { u16 ss_lcnt; u16 fs_hcnt; u16 fs_lcnt; + int (*acquire_lock)(struct dw_i2c_dev *dev); + void (*release_lock)(struct dw_i2c_dev *dev); + bool pm_runtime_disabled; }; #define ACCESS_SWAP 0x00000001 -- cgit v1.2.3 From 894acb2f823b13afacfe40b02efbd9146af58586 Mon Sep 17 00:00:00 2001 From: David Box Date: Thu, 15 Jan 2015 01:12:17 -0800 Subject: i2c: designware: Add Intel Baytrail PMIC I2C bus support This patch implements an I2C bus sharing mechanism between the host and platform hardware on select Intel BayTrail SoC platforms using the X-Powers AXP288 PMIC. On these platforms access to the PMIC must be shared with platform hardware. The hardware unit assumes full control of the I2C bus and the host must request access through a special semaphore. Hardware control of the bus also makes it necessary to disable runtime pm to avoid interfering with hardware transactions. Signed-off-by: David E. Box Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 11 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-designware-baytrail.c | 160 +++++++++++++++++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 6 + drivers/i2c/busses/i2c-designware-platdrv.c | 20 +++- 5 files changed, 193 insertions(+), 5 deletions(-) create mode 100644 drivers/i2c/busses/i2c-designware-baytrail.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 31e8308ba899..83062b2c0e6b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -465,6 +465,17 @@ config I2C_DESIGNWARE_PCI This driver can also be built as a module. If so, the module will be called i2c-designware-pci. +config I2C_DESIGNWARE_BAYTRAIL + bool "Intel Baytrail I2C semaphore support" + depends on I2C_DESIGNWARE_PLATFORM + select IOSF_MBI + help + This driver enables managed host access to the PMIC I2C bus on select + Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows + the host to request uninterrupted access to the PMIC's I2C bus from + the platform firmware controlling it. You should say Y if running on + a BayTrail system using the AXP288. + config I2C_EFM32 tristate "EFM32 I2C controller" depends on ARCH_EFM32 || COMPILE_TEST diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 56388f658d2f..a04f9726596d 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o +i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_EFM32) += i2c-efm32.o diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c new file mode 100644 index 000000000000..5f1ff4cc5c34 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-baytrail.c @@ -0,0 +1,160 @@ +/* + * Intel BayTrail PMIC I2C bus semaphore implementaion + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include "i2c-designware-core.h" + +#define SEMAPHORE_TIMEOUT 100 +#define PUNIT_SEMAPHORE 0x7 + +static unsigned long acquired; + +static int get_sem(struct device *dev, u32 *sem) +{ + u32 reg_val; + int ret; + + ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE, + ®_val); + if (ret) { + dev_err(dev, "iosf failed to read punit semaphore\n"); + return ret; + } + + *sem = reg_val & 0x1; + + return 0; +} + +static void reset_semaphore(struct device *dev) +{ + u32 data; + + if (iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, + PUNIT_SEMAPHORE, &data)) { + dev_err(dev, "iosf failed to reset punit semaphore during read\n"); + return; + } + + data = data & 0xfffffffe; + if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE, + PUNIT_SEMAPHORE, data)) + dev_err(dev, "iosf failed to reset punit semaphore during write\n"); +} + +int baytrail_i2c_acquire(struct dw_i2c_dev *dev) +{ + u32 sem = 0; + int ret; + unsigned long start, end; + + if (!dev || !dev->dev) + return -ENODEV; + + if (!dev->acquire_lock) + return 0; + + /* host driver writes 0x2 to side band semaphore register */ + ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE, + PUNIT_SEMAPHORE, 0x2); + if (ret) { + dev_err(dev->dev, "iosf punit semaphore request failed\n"); + return ret; + } + + /* host driver waits for bit 0 to be set in semaphore register */ + start = jiffies; + end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT); + while (!time_after(jiffies, end)) { + ret = get_sem(dev->dev, &sem); + if (!ret && sem) { + acquired = jiffies; + dev_dbg(dev->dev, "punit semaphore acquired after %ums\n", + jiffies_to_msecs(jiffies - start)); + return 0; + } + + usleep_range(1000, 2000); + } + + dev_err(dev->dev, "punit semaphore timed out, resetting\n"); + reset_semaphore(dev->dev); + + ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, + PUNIT_SEMAPHORE, &sem); + if (!ret) + dev_err(dev->dev, "iosf failed to read punit semaphore\n"); + else + dev_err(dev->dev, "PUNIT SEM: %d\n", sem); + + WARN_ON(1); + + return -ETIMEDOUT; +} +EXPORT_SYMBOL(baytrail_i2c_acquire); + +void baytrail_i2c_release(struct dw_i2c_dev *dev) +{ + if (!dev || !dev->dev) + return; + + if (!dev->acquire_lock) + return; + + reset_semaphore(dev->dev); + dev_dbg(dev->dev, "punit semaphore held for %ums\n", + jiffies_to_msecs(jiffies - acquired)); +} +EXPORT_SYMBOL(baytrail_i2c_release); + +int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev) +{ + acpi_status status; + unsigned long long shared_host = 0; + acpi_handle handle; + + if (!dev || !dev->dev) + return 0; + + handle = ACPI_HANDLE(dev->dev); + if (!handle) + return 0; + + status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host); + + if (ACPI_FAILURE(status)) + return 0; + + if (shared_host) { + dev_info(dev->dev, "I2C bus managed by PUNIT\n"); + dev->acquire_lock = baytrail_i2c_acquire; + dev->release_lock = baytrail_i2c_release; + dev->pm_runtime_disabled = true; + } + + if (!iosf_mbi_available()) + return -EPROBE_DEFER; + + return 0; +} +EXPORT_SYMBOL(i2c_dw_eval_lock_support); + +MODULE_AUTHOR("David E. Box "); +MODULE_DESCRIPTION("Baytrail I2C Semaphore driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index ef8ba839e2d3..9630222abf32 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -125,3 +125,9 @@ extern void i2c_dw_disable(struct dw_i2c_dev *dev); extern void i2c_dw_clear_int(struct dw_i2c_dev *dev); extern void i2c_dw_disable_int(struct dw_i2c_dev *dev); extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); + +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) +extern int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev); +#else +static inline int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev) { return 0; } +#endif diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 2b463c313e4e..c270f5f9a8f9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -195,6 +195,10 @@ static int dw_i2c_probe(struct platform_device *pdev) clk_freq = pdata->i2c_scl_freq; } + r = i2c_dw_eval_lock_support(dev); + if (r) + return r; + dev->functionality = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | @@ -257,10 +261,14 @@ static int dw_i2c_probe(struct platform_device *pdev) return r; } - pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); + if (dev->pm_runtime_disabled) { + pm_runtime_forbid(&pdev->dev); + } else { + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + } return 0; } @@ -310,7 +318,9 @@ static int dw_i2c_resume(struct device *dev) struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); clk_prepare_enable(i_dev->clk); - i2c_dw_init(i_dev); + + if (!i_dev->pm_runtime_disabled) + i2c_dw_init(i_dev); return 0; } -- cgit v1.2.3 From c680eed5ccd4a1c99ee48cd41f4e5fdfad497dc2 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 16 Jan 2015 00:07:22 -0800 Subject: i2c: do not try to load modules for of-registered devices Trying to register an I2C device asynchronously (via async_schedule() call) results in an ugly warning from request_module() warning about potential deadlock (because request_module tries to wait for async works to complete). While we could try to switch to request_module_nowait(), other buses, as well as I2C itself when not using device tree, do not try to load modules, but rather rely on the standard infrastructure (udev) to execute module loading, and we should be doing the same. Signed-off-by: Dmitry Torokhov Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7730a68fa2d0..72d53e40ebab 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1291,8 +1291,6 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, if (of_get_property(node, "wakeup-source", NULL)) info.flags |= I2C_CLIENT_WAKE; - request_module("%s%s", I2C_MODULE_PREFIX, info.type); - result = i2c_new_device(adap, &info); if (result == NULL) { dev_err(&adap->dev, "of_i2c: Failure registering %s\n", -- cgit v1.2.3 From 42ffd3907c1663441cd1bd4d1a575930b63a5964 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 23 Jan 2015 11:35:55 +0200 Subject: i2c: designware: Do not calculate SCL timing parameters needlessly Do SCL timing parameter calculation conditionally depending are custom parameters provided since calculated values will get instantly overwritten by provided parameters. Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 45 ++++++++++++++++---------------- 1 file changed, 22 insertions(+), 23 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index fbb48fb138e7..6e25c010e690 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -320,40 +320,39 @@ int i2c_dw_init(struct dw_i2c_dev *dev) sda_falling_time = dev->sda_falling_time ?: 300; /* ns */ scl_falling_time = dev->scl_falling_time ?: 300; /* ns */ - /* Standard-mode */ - hcnt = i2c_dw_scl_hcnt(input_clock_khz, - 4000, /* tHD;STA = tHIGH = 4.0 us */ - sda_falling_time, - 0, /* 0: DW default, 1: Ideal */ - 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(input_clock_khz, - 4700, /* tLOW = 4.7 us */ - scl_falling_time, - 0); /* No offset */ - - /* Allow platforms to specify the ideal HCNT and LCNT values */ + /* Set SCL timing parameters for standard-mode */ if (dev->ss_hcnt && dev->ss_lcnt) { hcnt = dev->ss_hcnt; lcnt = dev->ss_lcnt; + } else { + hcnt = i2c_dw_scl_hcnt(input_clock_khz, + 4000, /* tHD;STA = tHIGH = 4.0 us */ + sda_falling_time, + 0, /* 0: DW default, 1: Ideal */ + 0); /* No offset */ + lcnt = i2c_dw_scl_lcnt(input_clock_khz, + 4700, /* tLOW = 4.7 us */ + scl_falling_time, + 0); /* No offset */ } dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT); dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); - /* Fast-mode */ - hcnt = i2c_dw_scl_hcnt(input_clock_khz, - 600, /* tHD;STA = tHIGH = 0.6 us */ - sda_falling_time, - 0, /* 0: DW default, 1: Ideal */ - 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(input_clock_khz, - 1300, /* tLOW = 1.3 us */ - scl_falling_time, - 0); /* No offset */ - + /* Set SCL timing parameters for fast-mode */ if (dev->fs_hcnt && dev->fs_lcnt) { hcnt = dev->fs_hcnt; lcnt = dev->fs_lcnt; + } else { + hcnt = i2c_dw_scl_hcnt(input_clock_khz, + 600, /* tHD;STA = tHIGH = 0.6 us */ + sda_falling_time, + 0, /* 0: DW default, 1: Ideal */ + 0); /* No offset */ + lcnt = i2c_dw_scl_lcnt(input_clock_khz, + 1300, /* tLOW = 1.3 us */ + scl_falling_time, + 0); /* No offset */ } dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT); dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); -- cgit v1.2.3 From 9136c5463f990d51c9f9361cd6be27f7f4d8fca7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 26 Jan 2015 17:49:34 +0100 Subject: i2c: designware-baytrail: use proper Kconfig dependencies IOSF_MBI depends on PCI, so we should not select it but depend on it. This ensures also we compile on X86 only, other archs will break because of an arch specific include. Also depend on ACPI since this driver uses it. Signed-off-by: Wolfram Sang Acked-by: David E. Box --- drivers/i2c/busses/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 83062b2c0e6b..442408d2e7b7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -467,8 +467,7 @@ config I2C_DESIGNWARE_PCI config I2C_DESIGNWARE_BAYTRAIL bool "Intel Baytrail I2C semaphore support" - depends on I2C_DESIGNWARE_PLATFORM - select IOSF_MBI + depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI && ACPI help This driver enables managed host access to the PMIC I2C bus on select Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows -- cgit v1.2.3 From 8c340f6090e365ce5bac02eed07c1de3aa83f735 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Mon, 26 Jan 2015 19:55:02 +0300 Subject: i2c: tegra: Maintain CPU endianness Support CPU BE mode by adding endianness conversion for memcpy interactions. Signed-off-by: Dmitry Osipenko Acked-by: Alexandre Courbot Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 28b87e683503..29f14331dd9d 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -286,6 +286,7 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev) if (rx_fifo_avail > 0 && buf_remaining > 0) { BUG_ON(buf_remaining > 3); val = i2c_readl(i2c_dev, I2C_RX_FIFO); + val = cpu_to_le32(val); memcpy(buf, &val, buf_remaining); buf_remaining = 0; rx_fifo_avail--; @@ -344,6 +345,7 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) if (tx_fifo_avail > 0 && buf_remaining > 0) { BUG_ON(buf_remaining > 3); memcpy(&val, buf, buf_remaining); + val = le32_to_cpu(val); /* Again update before writing to FIFO to make sure isr sees. */ i2c_dev->msg_buf_remaining = 0; -- cgit v1.2.3 From 3a33a85401ecdb0e2c01ea86d9e36a5711ce01d4 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 2 Feb 2015 18:28:12 +0300 Subject: i2c: ocores: fix clock-frequency binding usage clock-frequency property is meant to control the bus frequency for i2c bus drivers, but it was incorrectly used to specify i2c controller input clock frequency. Introduce new attribute, opencores,ip-clock-frequency, that specifies i2c controller clock frequency and make clock-frequency attribute compatible with other i2c drivers. Maintain backwards compatibility in case opencores,ip-clock-frequency attribute is missing. Signed-off-by: Max Filippov Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-ocores.txt | 18 ++++++- drivers/i2c/busses/i2c-ocores.c | 55 +++++++++++++++++----- 2 files changed, 58 insertions(+), 15 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt index 1637c298a1b3..5bef3adf2c35 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt @@ -4,15 +4,29 @@ Required properties: - compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst" - reg : bus address start and address range size of device - interrupts : interrupt number -- clock-frequency : frequency of bus clock in Hz +- opencores,ip-clock-frequency: frequency of the controller clock in Hz; + see the note below - #address-cells : should be <1> - #size-cells : should be <0> Optional properties: +- clock-frequency : frequency of bus clock in Hz; see the note below. + Defaults to 100 KHz when the property is not specified - reg-shift : device register offsets are shifted by this value - reg-io-width : io register width in bytes (1, 2 or 4) - regstep : deprecated, use reg-shift above +Note +clock-frequency property is meant to control the bus frequency for i2c bus +drivers, but it was incorrectly used to specify i2c controller input clock +frequency. So the following rules are set to fix this situation: +- if clock-frequency is present and opencores,ip-clock-frequency is not, + then clock-frequency specifies i2c controller clock frequency. This is + to keep backwards compatibility with setups using old DTB. i2c bus + frequency is fixed at 100 KHz. +- if opencores,ip-clock-frequency is present it specifies i2c controller + clock frequency. clock-frequency property specifies i2c bus frequency. + Example: i2c0: ocores@a0000000 { @@ -21,7 +35,7 @@ Example: compatible = "opencores,i2c-ocores"; reg = <0xa0000000 0x8>; interrupts = <10>; - clock-frequency = <20000000>; + opencores,ip-clock-frequency = <20000000>; reg-shift = <0>; /* 8 bit registers */ reg-io-width = <1>; /* 8 bit read/write */ diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 7249b5b1e5d0..6cbbb134cfb7 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -35,7 +35,8 @@ struct ocores_i2c { int pos; int nmsgs; int state; /* see STATE_ */ - int clock_khz; + int ip_clock_khz; + int bus_clock_khz; void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); u8 (*getreg)(struct ocores_i2c *i2c, int reg); }; @@ -215,21 +216,34 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return -ETIMEDOUT; } -static void ocores_init(struct ocores_i2c *i2c) +static int ocores_init(struct device *dev, struct ocores_i2c *i2c) { int prescale; + int diff; u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); /* make sure the device is disabled */ oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); - prescale = (i2c->clock_khz / (5*100)) - 1; + prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1; + prescale = clamp(prescale, 0, 0xffff); + + diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz; + if (abs(diff) > i2c->bus_clock_khz / 10) { + dev_err(dev, + "Unsupported clock settings: core: %d KHz, bus: %d KHz\n", + i2c->ip_clock_khz, i2c->bus_clock_khz); + return -EINVAL; + } + oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); /* Init the device */ oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN); + + return 0; } @@ -304,6 +318,8 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; u32 val; + u32 clock_frequency; + bool clock_frequency_present; if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) { /* no 'reg-shift', check for deprecated 'regstep' */ @@ -319,12 +335,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, } } - if (of_property_read_u32(np, "clock-frequency", &val)) { - dev_err(&pdev->dev, - "Missing required parameter 'clock-frequency'\n"); - return -ENODEV; + clock_frequency_present = !of_property_read_u32(np, "clock-frequency", + &clock_frequency); + i2c->bus_clock_khz = 100; + + if (of_property_read_u32(np, "opencores,ip-clock-frequency", &val)) { + if (!clock_frequency_present) { + dev_err(&pdev->dev, + "Missing required parameter 'opencores,ip-clock-frequency'\n"); + return -ENODEV; + } + i2c->ip_clock_khz = clock_frequency / 1000; + dev_warn(&pdev->dev, + "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n"); + } else { + i2c->ip_clock_khz = val / 1000; + if (clock_frequency_present) + i2c->bus_clock_khz = clock_frequency / 1000; } - i2c->clock_khz = val / 1000; of_property_read_u32(pdev->dev.of_node, "reg-io-width", &i2c->reg_io_width); @@ -368,7 +396,8 @@ static int ocores_i2c_probe(struct platform_device *pdev) if (pdata) { i2c->reg_shift = pdata->reg_shift; i2c->reg_io_width = pdata->reg_io_width; - i2c->clock_khz = pdata->clock_khz; + i2c->ip_clock_khz = pdata->clock_khz; + i2c->bus_clock_khz = 100; } else { ret = ocores_i2c_of_probe(pdev, i2c); if (ret) @@ -402,7 +431,9 @@ static int ocores_i2c_probe(struct platform_device *pdev) } } - ocores_init(i2c); + ret = ocores_init(&pdev->dev, i2c); + if (ret) + return ret; init_waitqueue_head(&i2c->wait); ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, @@ -465,9 +496,7 @@ static int ocores_i2c_resume(struct device *dev) { struct ocores_i2c *i2c = dev_get_drvdata(dev); - ocores_init(i2c); - - return 0; + return ocores_init(dev, i2c); } static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume); -- cgit v1.2.3 From 26680ee279ca7e404275eab2c683b5324afb396a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 29 Jan 2015 22:45:09 +0100 Subject: i2c: clarify comments about the dev_released completion There was quite some confusion why this completion is there and if it is still necessary. Sadly, it is. However, let's improve the comments and share what we rediscovered. Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 72d53e40ebab..4764a1fa0b56 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1666,11 +1666,15 @@ void i2c_del_adapter(struct i2c_adapter *adap) /* device name is gone after device_unregister */ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); - /* clean up the sysfs representation */ + /* wait until all references to the device are gone + * + * FIXME: This is old code and should ideally be replaced by an + * alternative which results in decoupling the lifetime of the struct + * device from the i2c_adapter, like spi or netdev do. Any solution + * should be throughly tested with DEBUG_KOBJECT_RELEASE enabled! + */ init_completion(&adap->dev_released); device_unregister(&adap->dev); - - /* wait for sysfs to drop all references */ wait_for_completion(&adap->dev_released); /* free bus id */ -- cgit v1.2.3 From 181d9a07da1050d3da30c6936eb825724fefc18a Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Sat, 31 Jan 2015 17:28:15 +0800 Subject: i2c: hix5hd2: add COMPILE_TEST Commit 9439eb3ab9d1ec ("asm-generic: io: implement relaxed accessor macros as conditional wrappers") has added {read,write}{b,w,l,q}_relaxed to include/asm-generic/io.h. So COMPILE_TEST can be added. Signed-off-by: Zhangfei Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 442408d2e7b7..d4a5c2e5788b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -79,7 +79,7 @@ config I2C_AMD8111 config I2C_HIX5HD2 tristate "Hix5hd2 high-speed I2C driver" - depends on ARCH_HIX5HD2 + depends on ARCH_HIX5HD2 || COMPILE_TEST help Say Y here to include support for high-speed I2C controller in the Hisilicon based hix5hd2 SoCs. -- cgit v1.2.3 From e961a094afe04c6c8ca1adac50c8d16513f31b93 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 5 Feb 2015 22:55:01 +0300 Subject: i2c: ocores: add common clock support Allow bus clock specification as a common clock handle. This makes this controller easier to use in a setup based on common clock framework. Signed-off-by: Max Filippov Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-ocores.txt | 32 +++++++++++++++++---- drivers/i2c/busses/i2c-ocores.c | 33 +++++++++++++++++++++- 2 files changed, 59 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt index 5bef3adf2c35..17bef9a34e50 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt @@ -4,8 +4,10 @@ Required properties: - compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst" - reg : bus address start and address range size of device - interrupts : interrupt number +- clocks : handle to the controller clock; see the note below. + Mutually exclusive with opencores,ip-clock-frequency - opencores,ip-clock-frequency: frequency of the controller clock in Hz; - see the note below + see the note below. Mutually exclusive with clocks - #address-cells : should be <1> - #size-cells : should be <0> @@ -20,14 +22,16 @@ Note clock-frequency property is meant to control the bus frequency for i2c bus drivers, but it was incorrectly used to specify i2c controller input clock frequency. So the following rules are set to fix this situation: -- if clock-frequency is present and opencores,ip-clock-frequency is not, - then clock-frequency specifies i2c controller clock frequency. This is - to keep backwards compatibility with setups using old DTB. i2c bus +- if clock-frequency is present and neither opencores,ip-clock-frequency nor + clocks are, then clock-frequency specifies i2c controller clock frequency. + This is to keep backwards compatibility with setups using old DTB. i2c bus frequency is fixed at 100 KHz. +- if clocks is present it specifies i2c controller clock. clock-frequency + property specifies i2c bus frequency. - if opencores,ip-clock-frequency is present it specifies i2c controller clock frequency. clock-frequency property specifies i2c bus frequency. -Example: +Examples: i2c0: ocores@a0000000 { #address-cells = <1>; @@ -40,6 +44,24 @@ Example: reg-shift = <0>; /* 8 bit registers */ reg-io-width = <1>; /* 8 bit read/write */ + dummy@60 { + compatible = "dummy"; + reg = <0x60>; + }; + }; +or + i2c0: ocores@a0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "opencores,i2c-ocores"; + reg = <0xa0000000 0x8>; + interrupts = <10>; + clocks = <&osc>; + clock-frequency = <400000>; /* i2c bus frequency 400 KHz */ + + reg-shift = <0>; /* 8 bit registers */ + reg-io-width = <1>; /* 8 bit read/write */ + dummy@60 { compatible = "dummy"; reg = <0x60>; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 6cbbb134cfb7..3fc76b6ffcaa 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -12,6 +12,7 @@ * kind, whether express or implied. */ +#include #include #include #include @@ -35,6 +36,7 @@ struct ocores_i2c { int pos; int nmsgs; int state; /* see STATE_ */ + struct clk *clk; int ip_clock_khz; int bus_clock_khz; void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); @@ -339,7 +341,21 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, &clock_frequency); i2c->bus_clock_khz = 100; - if (of_property_read_u32(np, "opencores,ip-clock-frequency", &val)) { + i2c->clk = devm_clk_get(&pdev->dev, NULL); + + if (!IS_ERR(i2c->clk)) { + int ret = clk_prepare_enable(i2c->clk); + + if (ret) { + dev_err(&pdev->dev, + "clk_prepare_enable failed: %d\n", ret); + return ret; + } + i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; + if (clock_frequency_present) + i2c->bus_clock_khz = clock_frequency / 1000; + } else if (of_property_read_u32(np, "opencores,ip-clock-frequency", + &val)) { if (!clock_frequency_present) { dev_err(&pdev->dev, "Missing required parameter 'opencores,ip-clock-frequency'\n"); @@ -477,6 +493,9 @@ static int ocores_i2c_remove(struct platform_device *pdev) /* remove adapter & data */ i2c_del_adapter(&i2c->adap); + if (!IS_ERR(i2c->clk)) + clk_disable_unprepare(i2c->clk); + return 0; } @@ -489,6 +508,8 @@ static int ocores_i2c_suspend(struct device *dev) /* make sure the device is disabled */ oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + if (!IS_ERR(i2c->clk)) + clk_disable_unprepare(i2c->clk); return 0; } @@ -496,6 +517,16 @@ static int ocores_i2c_resume(struct device *dev) { struct ocores_i2c *i2c = dev_get_drvdata(dev); + if (!IS_ERR(i2c->clk)) { + int ret = clk_prepare_enable(i2c->clk); + + if (ret) { + dev_err(dev, + "clk_prepare_enable failed: %d\n", ret); + return ret; + } + i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; + } return ocores_init(dev, i2c); } -- cgit v1.2.3 From a93ac5786d26851fd5df42338e26593cb8d58725 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 6 Feb 2015 13:47:02 +0200 Subject: i2c: designware-pci: update Intel copyright line While here, fix few indentations issues across the code. There is no functional change. Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-pcidrv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 87f51f50985d..6643d2dc0b25 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -6,7 +6,7 @@ * Copyright (C) 2006 Texas Instruments. * Copyright (C) 2007 MontaVista Software Inc. * Copyright (C) 2009 Provigent Ltd. - * Copyright (C) 2011 Intel corporation. + * Copyright (C) 2011, 2015 Intel Corporation. * * ---------------------------------------------------------------------------- * @@ -97,7 +97,7 @@ static struct dw_scl_sda_cfg hsw_config = { .sda_hold = 0x9, }; -static struct dw_pci_controller dw_pci_controllers[] = { +static struct dw_pci_controller dw_pci_controllers[] = { [medfield_0] = { .bus_num = 0, .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, @@ -232,7 +232,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->functionality = controller->functionality | DW_DEFAULT_FUNCTIONALITY; - dev->master_cfg = controller->bus_cfg; + dev->master_cfg = controller->bus_cfg; if (controller->scl_sda_cfg) { cfg = controller->scl_sda_cfg; dev->ss_hcnt = cfg->ss_hcnt; @@ -299,7 +299,7 @@ MODULE_ALIAS("i2c_designware-pci"); static const struct pci_device_id i2_designware_pci_ids[] = { /* Medfield */ - { PCI_VDEVICE(INTEL, 0x0817), medfield_3,}, + { PCI_VDEVICE(INTEL, 0x0817), medfield_3 }, { PCI_VDEVICE(INTEL, 0x0818), medfield_4 }, { PCI_VDEVICE(INTEL, 0x0819), medfield_5 }, { PCI_VDEVICE(INTEL, 0x082C), medfield_0 }, @@ -317,7 +317,7 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x9c61), haswell }, { PCI_VDEVICE(INTEL, 0x9c62), haswell }, /* Braswell / Cherrytrail */ - { PCI_VDEVICE(INTEL, 0x22C1), baytrail,}, + { PCI_VDEVICE(INTEL, 0x22C1), baytrail }, { PCI_VDEVICE(INTEL, 0x22C2), baytrail }, { PCI_VDEVICE(INTEL, 0x22C3), baytrail }, { PCI_VDEVICE(INTEL, 0x22C4), baytrail }, -- cgit v1.2.3 From e6e5dd3566e092459a11083e5c0775d01df8682f Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Sat, 7 Feb 2015 21:25:24 -0800 Subject: i2c: iproc: Add Broadcom iProc I2C Driver Add initial support to the Broadcom iProc I2C controller found in the iProc family of SoCs. The iProc I2C controller has separate internal TX and RX FIFOs, each has a size of 64 bytes. The iProc I2C controller supports two bus speeds including standard mode (100kHz) and fast mode (400kHz) Signed-off-by: Ray Jui Reviewed-by: Scott Branden Reviewed-by: Kevin Cernekee Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/brcm,iproc-i2c.txt | 37 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-bcm-iproc.c | 461 +++++++++++++++++++++ 4 files changed, 509 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt create mode 100644 drivers/i2c/busses/i2c-bcm-iproc.c diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt new file mode 100644 index 000000000000..81f982ccca31 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt @@ -0,0 +1,37 @@ +Broadcom iProc I2C controller + +Required properties: + +- compatible: + Must be "brcm,iproc-i2c" + +- reg: + Define the base and range of the I/O address space that contain the iProc + I2C controller registers + +- interrupts: + Should contain the I2C interrupt + +- clock-frequency: + This is the I2C bus clock. Need to be either 100000 or 400000 + +- #address-cells: + Always 1 (for I2C addresses) + +- #size-cells: + Always 0 + +Example: + i2c0: i2c@18008000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + + codec: wm8750@1a { + compatible = "wlf,wm8750"; + reg = <0x1a>; + }; + }; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d4a5c2e5788b..3de426e2263a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -372,6 +372,16 @@ config I2C_BCM2835 This support is also available as a module. If so, the module will be called i2c-bcm2835. +config I2C_BCM_IPROC + tristate "Broadcom iProc I2C controller" + depends on ARCH_BCM_IPROC || COMPILE_TEST + default ARCH_BCM_IPROC + help + If you say yes to this option, support will be included for the + Broadcom iProc I2C controller. + + If you don't know what to do here, say N. + config I2C_BCM_KONA tristate "BCM Kona I2C adapter" depends on ARCH_BCM_MOBILE diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index a04f9726596d..3638feb6677e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o +obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c new file mode 100644 index 000000000000..d3c89157b337 --- /dev/null +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -0,0 +1,461 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CFG_OFFSET 0x00 +#define CFG_RESET_SHIFT 31 +#define CFG_EN_SHIFT 30 +#define CFG_M_RETRY_CNT_SHIFT 16 +#define CFG_M_RETRY_CNT_MASK 0x0f + +#define TIM_CFG_OFFSET 0x04 +#define TIM_CFG_MODE_400_SHIFT 31 + +#define M_FIFO_CTRL_OFFSET 0x0c +#define M_FIFO_RX_FLUSH_SHIFT 31 +#define M_FIFO_TX_FLUSH_SHIFT 30 +#define M_FIFO_RX_CNT_SHIFT 16 +#define M_FIFO_RX_CNT_MASK 0x7f +#define M_FIFO_RX_THLD_SHIFT 8 +#define M_FIFO_RX_THLD_MASK 0x3f + +#define M_CMD_OFFSET 0x30 +#define M_CMD_START_BUSY_SHIFT 31 +#define M_CMD_STATUS_SHIFT 25 +#define M_CMD_STATUS_MASK 0x07 +#define M_CMD_STATUS_SUCCESS 0x0 +#define M_CMD_STATUS_LOST_ARB 0x1 +#define M_CMD_STATUS_NACK_ADDR 0x2 +#define M_CMD_STATUS_NACK_DATA 0x3 +#define M_CMD_STATUS_TIMEOUT 0x4 +#define M_CMD_PROTOCOL_SHIFT 9 +#define M_CMD_PROTOCOL_MASK 0xf +#define M_CMD_PROTOCOL_BLK_WR 0x7 +#define M_CMD_PROTOCOL_BLK_RD 0x8 +#define M_CMD_PEC_SHIFT 8 +#define M_CMD_RD_CNT_SHIFT 0 +#define M_CMD_RD_CNT_MASK 0xff + +#define IE_OFFSET 0x38 +#define IE_M_RX_FIFO_FULL_SHIFT 31 +#define IE_M_RX_THLD_SHIFT 30 +#define IE_M_START_BUSY_SHIFT 28 + +#define IS_OFFSET 0x3c +#define IS_M_RX_FIFO_FULL_SHIFT 31 +#define IS_M_RX_THLD_SHIFT 30 +#define IS_M_START_BUSY_SHIFT 28 + +#define M_TX_OFFSET 0x40 +#define M_TX_WR_STATUS_SHIFT 31 +#define M_TX_DATA_SHIFT 0 +#define M_TX_DATA_MASK 0xff + +#define M_RX_OFFSET 0x44 +#define M_RX_STATUS_SHIFT 30 +#define M_RX_STATUS_MASK 0x03 +#define M_RX_PEC_ERR_SHIFT 29 +#define M_RX_DATA_SHIFT 0 +#define M_RX_DATA_MASK 0xff + +#define I2C_TIMEOUT_MESC 100 +#define M_TX_RX_FIFO_SIZE 64 + +enum bus_speed_index { + I2C_SPD_100K = 0, + I2C_SPD_400K, +}; + +struct bcm_iproc_i2c_dev { + struct device *device; + int irq; + + void __iomem *base; + + struct i2c_adapter adapter; + + struct completion done; + int xfer_is_done; +}; + +/* + * Can be expanded in the future if more interrupt status bits are utilized + */ +#define ISR_MASK (1 << IS_M_START_BUSY_SHIFT) + +static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = data; + u32 status = readl(iproc_i2c->base + IS_OFFSET); + + status &= ISR_MASK; + + if (!status) + return IRQ_NONE; + + writel(status, iproc_i2c->base + IS_OFFSET); + iproc_i2c->xfer_is_done = 1; + complete_all(&iproc_i2c->done); + + return IRQ_HANDLED; +} + +static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, + struct i2c_msg *msg) +{ + u32 val; + + val = readl(iproc_i2c->base + M_CMD_OFFSET); + val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK; + + switch (val) { + case M_CMD_STATUS_SUCCESS: + return 0; + + case M_CMD_STATUS_LOST_ARB: + dev_dbg(iproc_i2c->device, "lost bus arbitration\n"); + return -EAGAIN; + + case M_CMD_STATUS_NACK_ADDR: + dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr); + return -ENXIO; + + case M_CMD_STATUS_NACK_DATA: + dev_dbg(iproc_i2c->device, "NAK data\n"); + return -ENXIO; + + case M_CMD_STATUS_TIMEOUT: + dev_dbg(iproc_i2c->device, "bus timeout\n"); + return -ETIMEDOUT; + + default: + dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val); + return -EIO; + } +} + +static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, + struct i2c_msg *msg) +{ + int ret, i; + u8 addr; + u32 val; + unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC); + + /* need to reserve one byte in the FIFO for the slave address */ + if (msg->len > M_TX_RX_FIFO_SIZE - 1) { + dev_err(iproc_i2c->device, + "only support data length up to %u bytes\n", + M_TX_RX_FIFO_SIZE - 1); + return -EOPNOTSUPP; + } + + /* check if bus is busy */ + if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) & + BIT(M_CMD_START_BUSY_SHIFT))) { + dev_warn(iproc_i2c->device, "bus is busy\n"); + return -EBUSY; + } + + /* format and load slave address into the TX FIFO */ + addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0); + writel(addr, iproc_i2c->base + M_TX_OFFSET); + + /* for a write transaction, load data into the TX FIFO */ + if (!(msg->flags & I2C_M_RD)) { + for (i = 0; i < msg->len; i++) { + val = msg->buf[i]; + + /* mark the last byte */ + if (i == msg->len - 1) + val |= 1 << M_TX_WR_STATUS_SHIFT; + + writel(val, iproc_i2c->base + M_TX_OFFSET); + } + } + + /* mark as incomplete before starting the transaction */ + reinit_completion(&iproc_i2c->done); + iproc_i2c->xfer_is_done = 0; + + /* + * Enable the "start busy" interrupt, which will be triggered after the + * transaction is done, i.e., the internal start_busy bit, transitions + * from 1 to 0. + */ + writel(1 << IE_M_START_BUSY_SHIFT, iproc_i2c->base + IE_OFFSET); + + /* + * Now we can activate the transfer. For a read operation, specify the + * number of bytes to read + */ + val = 1 << M_CMD_START_BUSY_SHIFT; + if (msg->flags & I2C_M_RD) { + val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) | + (msg->len << M_CMD_RD_CNT_SHIFT); + } else { + val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT); + } + writel(val, iproc_i2c->base + M_CMD_OFFSET); + + time_left = wait_for_completion_timeout(&iproc_i2c->done, time_left); + + /* disable all interrupts */ + writel(0, iproc_i2c->base + IE_OFFSET); + /* read it back to flush the write */ + readl(iproc_i2c->base + IE_OFFSET); + + /* make sure the interrupt handler isn't running */ + synchronize_irq(iproc_i2c->irq); + + if (!time_left && !iproc_i2c->xfer_is_done) { + dev_err(iproc_i2c->device, "transaction timed out\n"); + + /* flush FIFOs */ + val = (1 << M_FIFO_RX_FLUSH_SHIFT) | + (1 << M_FIFO_TX_FLUSH_SHIFT); + writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + return -ETIMEDOUT; + } + + ret = bcm_iproc_i2c_check_status(iproc_i2c, msg); + if (ret) { + /* flush both TX/RX FIFOs */ + val = (1 << M_FIFO_RX_FLUSH_SHIFT) | + (1 << M_FIFO_TX_FLUSH_SHIFT); + writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + return ret; + } + + /* + * For a read operation, we now need to load the data from FIFO + * into the memory buffer + */ + if (msg->flags & I2C_M_RD) { + for (i = 0; i < msg->len; i++) { + msg->buf[i] = (readl(iproc_i2c->base + M_RX_OFFSET) >> + M_RX_DATA_SHIFT) & M_RX_DATA_MASK; + } + } + + return 0; +} + +static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg msgs[], int num) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter); + int ret, i; + + /* go through all messages */ + for (i = 0; i < num; i++) { + ret = bcm_iproc_i2c_xfer_single_msg(iproc_i2c, &msgs[i]); + if (ret) { + dev_dbg(iproc_i2c->device, "xfer failed\n"); + return ret; + } + } + + return num; +} + +static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm bcm_iproc_algo = { + .master_xfer = bcm_iproc_i2c_xfer, + .functionality = bcm_iproc_i2c_functionality, +}; + +static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + unsigned int bus_speed; + u32 val; + int ret = of_property_read_u32(iproc_i2c->device->of_node, + "clock-frequency", &bus_speed); + if (ret < 0) { + dev_info(iproc_i2c->device, + "unable to interpret clock-frequency DT property\n"); + bus_speed = 100000; + } + + if (bus_speed < 100000) { + dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n", + bus_speed); + dev_err(iproc_i2c->device, + "valid speeds are 100khz and 400khz\n"); + return -EINVAL; + } else if (bus_speed < 400000) { + bus_speed = 100000; + } else { + bus_speed = 400000; + } + + val = readl(iproc_i2c->base + TIM_CFG_OFFSET); + val &= ~(1 << TIM_CFG_MODE_400_SHIFT); + val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT; + writel(val, iproc_i2c->base + TIM_CFG_OFFSET); + + dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); + + return 0; +} + +static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + u32 val; + + /* put controller in reset */ + val = readl(iproc_i2c->base + CFG_OFFSET); + val |= 1 << CFG_RESET_SHIFT; + val &= ~(1 << CFG_EN_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); + + /* wait 100 usec per spec */ + udelay(100); + + /* bring controller out of reset */ + val &= ~(1 << CFG_RESET_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); + + /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ + val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT); + writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + + /* disable all interrupts */ + writel(0, iproc_i2c->base + IE_OFFSET); + + /* clear all pending interrupts */ + writel(0xffffffff, iproc_i2c->base + IS_OFFSET); + + return 0; +} + +static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, + bool enable) +{ + u32 val; + + val = readl(iproc_i2c->base + CFG_OFFSET); + if (enable) + val |= BIT(CFG_EN_SHIFT); + else + val &= ~BIT(CFG_EN_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); +} + +static int bcm_iproc_i2c_probe(struct platform_device *pdev) +{ + int irq, ret = 0; + struct bcm_iproc_i2c_dev *iproc_i2c; + struct i2c_adapter *adap; + struct resource *res; + + iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c), + GFP_KERNEL); + if (!iproc_i2c) + return -ENOMEM; + + platform_set_drvdata(pdev, iproc_i2c); + iproc_i2c->device = &pdev->dev; + init_completion(&iproc_i2c->done); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res); + if (IS_ERR(iproc_i2c->base)) + return PTR_ERR(iproc_i2c->base); + + ret = bcm_iproc_i2c_init(iproc_i2c); + if (ret) + return ret; + + ret = bcm_iproc_i2c_cfg_speed(iproc_i2c); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(iproc_i2c->device, "no irq resource\n"); + return irq; + } + iproc_i2c->irq = irq; + + ret = devm_request_irq(iproc_i2c->device, irq, bcm_iproc_i2c_isr, 0, + pdev->name, iproc_i2c); + if (ret < 0) { + dev_err(iproc_i2c->device, "unable to request irq %i\n", irq); + return ret; + } + + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + + adap = &iproc_i2c->adapter; + i2c_set_adapdata(adap, iproc_i2c); + strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name)); + adap->algo = &bcm_iproc_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + ret = i2c_add_adapter(adap); + if (ret) { + dev_err(iproc_i2c->device, "failed to add adapter\n"); + return ret; + } + + return 0; +} + +static int bcm_iproc_i2c_remove(struct platform_device *pdev) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev); + + /* make sure there's no pending interrupt when we remove the adapter */ + writel(0, iproc_i2c->base + IE_OFFSET); + readl(iproc_i2c->base + IE_OFFSET); + synchronize_irq(iproc_i2c->irq); + + i2c_del_adapter(&iproc_i2c->adapter); + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + + return 0; +} + +static const struct of_device_id bcm_iproc_i2c_of_match[] = { + { .compatible = "brcm,iproc-i2c" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match); + +static struct platform_driver bcm_iproc_i2c_driver = { + .driver = { + .name = "bcm-iproc-i2c", + .of_match_table = bcm_iproc_i2c_of_match, + }, + .probe = bcm_iproc_i2c_probe, + .remove = bcm_iproc_i2c_remove, +}; +module_platform_driver(bcm_iproc_i2c_driver); + +MODULE_AUTHOR("Ray Jui "); +MODULE_DESCRIPTION("Broadcom iProc I2C Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 8421d4fe8ec5360a8af0c29f3570feaf79e7f27a Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 19 Feb 2015 12:51:30 +0200 Subject: i2c: fix reference to functionality constants definition Since commit 607ca46e97 ('UAPI: (Scripted) Disintegrate include/linux') the list of functionality constants moved to include/uapi/linux/i2c.h. Update the reference accordingly. Fixes: 607ca46e97 ('UAPI: (Scripted) Disintegrate include/linux') Signed-off-by: Baruch Siach Signed-off-by: Wolfram Sang --- Documentation/i2c/functionality | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality index 4556a3eb87c4..4aae8ed15873 100644 --- a/Documentation/i2c/functionality +++ b/Documentation/i2c/functionality @@ -12,7 +12,7 @@ FUNCTIONALITY CONSTANTS ----------------------- For the most up-to-date list of functionality constants, please check -! +! I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus adapters typically can not do these) -- cgit v1.2.3 From b4ad0510f5d9099487acf2c748b99081ab6ab869 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Feb 2015 17:02:59 +0100 Subject: i2c: designware-baytrail: another fixup for proper Kconfig dependencies IOSF_MBI is tristate. Baytrail driver isn't. Reported-by: Randy Dunlap Acked-by: David E. Box Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3de426e2263a..81a3ce90edb3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -477,7 +477,7 @@ config I2C_DESIGNWARE_PCI config I2C_DESIGNWARE_BAYTRAIL bool "Intel Baytrail I2C semaphore support" - depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI && ACPI + depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI=y && ACPI help This driver enables managed host access to the PMIC I2C bus on select Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows -- cgit v1.2.3 From 0d8fb59924cf20e7bef2c41f8d4e87127f573546 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Feb 2015 17:22:34 +0100 Subject: i2c: ocores: rework clk code to handle NULL cookie For, !HAVE_CLK the clk API returns a NULL cookie. Rework the initialization code to handle that. If clk_get_rate() delivers 0, we use the fallback mechanisms. The patch is pretty easy when ignoring white space issues (git diff -b). Suggested-by: Russell King Signed-off-by: Wolfram Sang Tested-by: Max Filippov --- drivers/i2c/busses/i2c-ocores.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 3fc76b6ffcaa..abf5db7e441e 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -354,20 +354,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; if (clock_frequency_present) i2c->bus_clock_khz = clock_frequency / 1000; - } else if (of_property_read_u32(np, "opencores,ip-clock-frequency", - &val)) { - if (!clock_frequency_present) { - dev_err(&pdev->dev, - "Missing required parameter 'opencores,ip-clock-frequency'\n"); - return -ENODEV; + } + + if (i2c->ip_clock_khz == 0) { + if (of_property_read_u32(np, "opencores,ip-clock-frequency", + &val)) { + if (!clock_frequency_present) { + dev_err(&pdev->dev, + "Missing required parameter 'opencores,ip-clock-frequency'\n"); + return -ENODEV; + } + i2c->ip_clock_khz = clock_frequency / 1000; + dev_warn(&pdev->dev, + "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n"); + } else { + i2c->ip_clock_khz = val / 1000; + if (clock_frequency_present) + i2c->bus_clock_khz = clock_frequency / 1000; } - i2c->ip_clock_khz = clock_frequency / 1000; - dev_warn(&pdev->dev, - "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n"); - } else { - i2c->ip_clock_khz = val / 1000; - if (clock_frequency_present) - i2c->bus_clock_khz = clock_frequency / 1000; } of_property_read_u32(pdev->dev.of_node, "reg-io-width", @@ -518,6 +522,7 @@ static int ocores_i2c_resume(struct device *dev) struct ocores_i2c *i2c = dev_get_drvdata(dev); if (!IS_ERR(i2c->clk)) { + unsigned long rate; int ret = clk_prepare_enable(i2c->clk); if (ret) { @@ -525,7 +530,9 @@ static int ocores_i2c_resume(struct device *dev) "clk_prepare_enable failed: %d\n", ret); return ret; } - i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; + rate = clk_get_rate(i2c->clk) / 1000; + if (rate) + i2c->ip_clock_khz = rate; } return ocores_init(dev, i2c); } -- cgit v1.2.3