summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2020-06-17KVM: arm64: Save the host's PtrAuth keys in non-preemptible contextMarc Zyngier1-1/+21
commit ef3e40a7ea8dbe2abd0a345032cd7d5023b9684f upstream. When using the PtrAuth feature in a guest, we need to save the host's keys before allowing the guest to program them. For that, we dump them in a per-CPU data structure (the so called host context). But both call sites that do this are in preemptible context, which may end up in disaster should the vcpu thread get preempted before reentering the guest. Instead, save the keys eagerly on each vcpu_load(). This has an increased overhead, but is at least safe. Cc: stable@vger.kernel.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17KVM: arm64: Synchronize sysreg state on injecting an AArch32 exceptionMarc Zyngier1-0/+28
commit 0370964dd3ff7d3d406f292cb443a927952cbd05 upstream. On a VHE system, the EL1 state is left in the CPU most of the time, and only syncronized back to memory when vcpu_put() is called (most of the time on preemption). Which means that when injecting an exception, we'd better have a way to either: (1) write directly to the EL1 sysregs (2) synchronize the state back to memory, and do the changes there For an AArch64, we already do (1), so we are safe. Unfortunately, doing the same thing for AArch32 would be pretty invasive. Instead, we can easily implement (2) by calling the put/load architectural backends, and keep preemption disabled. We can then reload the state back into EL1. Cc: stable@vger.kernel.org Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17KVM: x86: Fix APIC page invalidation raceEiichi Tsukata1-10/+16
commit e649b3f0188f8fd34dd0dde8d43fd3312b902fb2 upstream. Commit b1394e745b94 ("KVM: x86: fix APIC page invalidation") tried to fix inappropriate APIC page invalidation by re-introducing arch specific kvm_arch_mmu_notifier_invalidate_range() and calling it from kvm_mmu_notifier_invalidate_range_start. However, the patch left a possible race where the VMCS APIC address cache is updated *before* it is unmapped: (Invalidator) kvm_mmu_notifier_invalidate_range_start() (Invalidator) kvm_make_all_cpus_request(kvm, KVM_REQ_APIC_PAGE_RELOAD) (KVM VCPU) vcpu_enter_guest() (KVM VCPU) kvm_vcpu_reload_apic_access_page() (Invalidator) actually unmap page Because of the above race, there can be a mismatch between the host physical address stored in the APIC_ACCESS_PAGE VMCS field and the host physical address stored in the EPT entry for the APIC GPA (0xfee0000). When this happens, the processor will not trap APIC accesses, and will instead show the raw contents of the APIC-access page. Because Windows OS periodically checks for unexpected modifications to the LAPIC register, this will show up as a BSOD crash with BugCheck CRITICAL_STRUCTURE_CORRUPTION (109) we are currently seeing in https://bugzilla.redhat.com/show_bug.cgi?id=1751017. The root cause of the issue is that kvm_arch_mmu_notifier_invalidate_range() cannot guarantee that no additional references are taken to the pages in the range before kvm_mmu_notifier_invalidate_range_end(). Fortunately, this case is supported by the MMU notifier API, as documented in include/linux/mmu_notifier.h: * If the subsystem * can't guarantee that no additional references are taken to * the pages in the range, it has to implement the * invalidate_range() notifier to remove any references taken * after invalidate_range_start(). The fix therefore is to reload the APIC-access page field in the VMCS from kvm_mmu_notifier_invalidate_range() instead of ..._range_start(). Cc: stable@vger.kernel.org Fixes: b1394e745b94 ("KVM: x86: fix APIC page invalidation") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=197951 Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Message-Id: <20200606042627.61070-1-eiichi.tsukata@nutanix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER readMarc Zyngier4-44/+75
[ Upstream commit 9a50ebbffa9862db7604345f5fd763122b0f6fed ] When a guest tries to read the active state of its interrupts, we currently just return whatever state we have in memory. This means that if such an interrupt lives in a List Register on another CPU, we fail to obsertve the latest active state for this interrupt. In order to remedy this, stop all the other vcpus so that they exit and we can observe the most recent value for the state. This is similar to what we are doing for the write side of the same registers, and results in new MMIO handlers for userspace (which do not need to stop the guest, as it is supposed to be stopped already). Reported-by: Julien Grall <julien@xen.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-14KVM: arm64: Fix 32bit PC wrap-aroundMarc Zyngier1-2/+6
commit 0225fd5e0a6a32af7af0aefac45c8ebf19dc5183 upstream. In the unlikely event that a 32bit vcpu traps into the hypervisor on an instruction that is located right at the end of the 32bit range, the emulation of that instruction is going to increment PC past the 32bit range. This isn't great, as userspace can then observe this value and get a bit confused. Conversly, userspace can do things like (in the context of a 64bit guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0, set PC to a 64bit value, change PSTATE to AArch32-USR, and observe that PC hasn't been truncated. More confusion. Fix both by: - truncating PC increments for 32bit guests - sanitizing all 32bit regs every time a core reg is changed by userspace, and that PSTATE indicates a 32bit mode. Cc: stable@vger.kernel.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14KVM: arm: vgic: Fix limit condition when writing to GICD_I[CS]ACTIVERMarc Zyngier1-2/+2
commit 1c32ca5dc6d00012f0c964e5fdd7042fcc71efb1 upstream. When deciding whether a guest has to be stopped we check whether this is a private interrupt or not. Unfortunately, there's an off-by-one bug here, and we fail to recognize a whole range of interrupts as being global (GICv2 SPIs 32-63). Fix the condition from > to be >=. Cc: stable@vger.kernel.org Fixes: abd7229626b93 ("KVM: arm/arm64: Simplify active_change_prepare and plug race") Reported-by: André Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05KVM: Check for a bad hva before dropping into the ghc slow pathSean Christopherson1-6/+6
commit fcfbc617547fc6d9552cb6c1c563b6a90ee98085 upstream. When reading/writing using the guest/host cache, check for a bad hva before checking for a NULL memslot, which triggers the slow path for handing cross-page accesses. Because the memslot is nullified on error by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after crossing into a new page, then the kvm_{read,write}_guest() slow path could potentially write/access the first chunk prior to detecting the bad hva. Arguably, performing a partial access is semantically correct from an architectural perspective, but that behavior is certainly not intended. In the original implementation, memslot was not explicitly nullified and therefore the partial access behavior varied based on whether the memslot itself was null, or if the hva was simply bad. The current behavior was introduced as a seemingly unintentional side effect in commit f1b9dd5eb86c ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init"), which justified the change with "since some callers don't check the return code from this function, it sit seems prudent to clear ghc->memslot in the event of an error". Regardless of intent, the partial access is dependent on _not_ checking the result of the cache initialization, which is arguably a bug in its own right, at best simply weird. Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Cc: Jim Mattson <jmattson@google.com> Cc: Andrew Honig <ahonig@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integerAlexandru Elisei1-1/+2
commit 4a267aa707953a9a73d1f5dc7f894dd9024a92be upstream. According to the ARM ARM, registers CNT{P,V}_TVAL_EL0 have bits [63:32] RES0 [1]. When reading the register, the value is truncated to the least significant 32 bits [2], and on writes, TimerValue is treated as a signed 32-bit integer [1, 2]. When the guest behaves correctly and writes 32-bit values, treating TVAL as an unsigned 64 bit register works as expected. However, things start to break down when the guest writes larger values, because (u64)0x1_ffff_ffff = 8589934591. but (s32)0x1_ffff_ffff = -1, and the former will cause the timer interrupt to be asserted in the future, but the latter will cause it to be asserted now. Let's treat TVAL as a signed 32-bit register on writes, to match the behaviour described in the architecture, and the behaviour experimentally exhibited by the virtual timer on a non-vhe host. [1] Arm DDI 0487E.a, section D13.8.18 [2] Arm DDI 0487E.a, section D11.2.4 Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> [maz: replaced the read-side mask with lower_32_bits] Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: 8fa761624871 ("KVM: arm/arm64: arch_timer: Fix CNTP_TVAL calculation") Link: https://lore.kernel.org/r/20200127103652.2326-1-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm64: pmu: Fix chained SW_INCR countersEric Auger1-13/+30
commit aa76829171e98bd75a0cc00b6248eca269ac7f4f upstream. At the moment a SW_INCR counter always overflows on 32-bit boundary, independently on whether the n+1th counter is programmed as CHAIN. Check whether the SW_INCR counter is a 64b counter and if so, implement the 64b logic. Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200124142535.29386-4-eric.auger@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unsetEric Auger1-0/+3
commit 3837407c1aa1101ed5e214c7d6041e7a23335c6e upstream. The specification says PMSWINC increments PMEVCNTR<n>_EL1 by 1 if PMEVCNTR<n>_EL0 is enabled and configured to count SW_INCR. For PMEVCNTR<n>_EL0 to be enabled, we need both PMCNTENSET to be set for the corresponding event counter but we also need the PMCR.E bit to be set. Fixes: 7a0adc7064b8 ("arm64: KVM: Add access handler for PMSWINC register") Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200124142535.29386-2-eric.auger@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm: Make inject_abt32() inject an external abort insteadJames Morse1-3/+7
commit 21aecdbd7f3ab02c9b82597dc733ee759fb8b274 upstream. KVM's inject_abt64() injects an external-abort into an aarch64 guest. The KVM_CAP_ARM_INJECT_EXT_DABT is intended to do exactly this, but for an aarch32 guest inject_abt32() injects an implementation-defined exception, 'Lockdown fault'. Change this to external abort. For non-LPAE we now get the documented: | Unhandled fault: external abort on non-linefetch (0x008) at 0x9c800f00 and for LPAE: | Unhandled fault: synchronous external abort (0x210) at 0x9c800f00 Fixes: 74a64a981662a ("KVM: arm/arm64: Unify 32bit fault injection") Reported-by: Beata Michalska <beata.michalska@linaro.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200121123356.203000-3-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm: Fix DFSR setting for non-LPAE aarch32 guestsJames Morse1-3/+5
commit 018f22f95e8a6c3e27188b7317ef2c70a34cb2cd upstream. Beata reports that KVM_SET_VCPU_EVENTS doesn't inject the expected exception to a non-LPAE aarch32 guest. The host intends to inject DFSR.FS=0x14 "IMPLEMENTATION DEFINED fault (Lockdown fault)", but the guest receives DFSR.FS=0x04 "Fault on instruction cache maintenance". This fault is hooked by do_translation_fault() since ARMv6, which goes on to silently 'handle' the exception, and restart the faulting instruction. It turns out, when TTBCR.EAE is clear DFSR is split, and FS[4] has to shuffle up to DFSR[10]. As KVM only does this in one place, fix up the static values. We now get the expected: | Unhandled fault: lock abort (0x404) at 0x9c800f00 Fixes: 74a64a981662a ("KVM: arm/arm64: Unify 32bit fault injection") Reported-by: Beata Michalska <beata.michalska@linaro.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200121123356.203000-2-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm/arm64: Fix young bit from mmu notifierGavin Shan1-1/+2
commit cf2d23e0bac9f6b5cd1cba8898f5f05ead40e530 upstream. kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong address range has been passed to handle_hva_to_gpa(). With the wrong address range, no young bits will be checked in handle_hva_to_gpa(). It means zero is always returned from mmu_notifier_test_young(). This fixes the issue by passing correct address range to the underly function handle_hva_to_gpa(), so that the hardware young (access) bit will be visited. Fixes: 35307b9a5f7e ("arm/arm64: KVM: Implement Stage-2 page aging") Signed-off-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15KVM: arm/arm64: vgic-its: Fix restoration of unmapped collectionsEric Auger1-1/+2
commit 8c58be34494b7f1b2adb446e2d8beeb90e5de65b upstream. Saving/restoring an unmapped collection is a valid scenario. For example this happens if a MAPTI command was sent, featuring an unmapped collection. At the moment the CTE fails to be restored. Only compare against the number of online vcpus if the rdist base is set. Fixes: ea1ad53e1e31a ("KVM: arm64: vgic-its: Collection table save/restore") Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11KVM: Play nice with read-only memslots when querying host page sizeSean Christopherson1-1/+1
[ Upstream commit 42cde48b2d39772dba47e680781a32a6c4b7dc33 ] Avoid the "writable" check in __gfn_to_hva_many(), which will always fail on read-only memslots due to gfn_to_hva() assuming writes. Functionally, this allows x86 to create large mappings for read-only memslots that are backed by HugeTLB mappings. Note, the changelog for commit 05da45583de9 ("KVM: MMU: large page support") states "If the largepage contains write-protected pages, a large pte is not used.", but "write-protected" refers to pages that are temporarily read-only, e.g. read-only memslots didn't even exist at the time. Fixes: 4d8b81abc47b ("KVM: introduce readonly memslot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> [Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-11KVM: Use vcpu-specific gva->hva translation when querying host page sizeSean Christopherson1-2/+2
[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-11KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVMSean Christopherson1-5/+5
[ Upstream commit 736c291c9f36b07f8889c61764c28edce20e715d ] Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-11x86/kvm: Cache gfn to pfn translationBoris Ostrovsky1-19/+79
commit 917248144db5d7320655dbb41d3af0b8a0f3d589 upstream. __kvm_map_gfn()'s call to gfn_to_pfn_memslot() is * relatively expensive * in certain cases (such as when done from atomic context) cannot be called Stashing gfn-to-pfn mapping should help with both cases. This is part of CVE-2019-3016. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11x86/kvm: Introduce kvm_(un)map_gfn()Boris Ostrovsky1-5/+24
commit 1eff70a9abd46f175defafd29bc17ad456f398a7 upstream. kvm_vcpu_(un)map operates on gfns from any current address space. In certain cases we want to make sure we are not mapping SMRAM and for that we can use kvm_(un)map_gfn() that we are introducing in this patch. This is part of CVE-2019-3016. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11KVM: arm64: Only sign-extend MMIO up to register widthChristoffer Dall1-0/+6
commit b6ae256afd32f96bec0117175b329d0dd617655e upstream. On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit register, and we should only sign extend the register up to the width of the register as specified in the operation (by using the 32-bit Wn or 64-bit Xn register specifier). As it turns out, the architecture provides this decoding information in the SF ("Sixty-Four" -- how cute...) bit. Let's take advantage of this with the usual 32-bit/64-bit header file dance and do the right thing on AArch64 hosts. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11KVM: arm/arm64: Correct AArch32 SPSR on exception entryMark Rutland1-3/+3
commit 1cfbb484de158e378e8971ac40f3082e53ecca55 upstream. Confusingly, there are three SPSR layouts that a kernel may need to deal with: (1) An AArch64 SPSR_ELx view of an AArch64 pstate (2) An AArch64 SPSR_ELx view of an AArch32 pstate (3) An AArch32 SPSR_* view of an AArch32 pstate When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions match the AArch32 SPSR_* view. However, when we inject an exception into an AArch32 guest, we have to synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64 host needs to synthesize layout #3 from layout #2. This patch adds a new host_spsr_to_spsr32() helper for this, and makes use of it in the KVM AArch32 support code. For arm64 we need to shuffle the DIT bit around, and remove the SS bit, while for arm we can use the value as-is. I've open-coded the bit manipulation for now to avoid having to rework the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_* definitions. I hope to perform a more thorough refactoring in future so that we can handle pstate view manipulation more consistently across the kernel tree. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11KVM: arm/arm64: Correct CPSR on exception entryMark Rutland1-10/+101
commit 3c2483f15499b877ccb53250d88addb8c91da147 upstream. When KVM injects an exception into a guest, it generates the CPSR value from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some CPSR bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-426. Note that this code is used by both arm and arm64, and is intended to fuction with the SPSR_EL2 and SPSR_HYP layouts. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31KVM: arm/arm64: Properly handle faulting of device mappingsMarc Zyngier1-4/+17
commit 6d674e28f642e3ff676fbae2d8d1b872814d32b6 upstream. A device mapping is normally always mapped at Stage-2, since there is very little gain in having it faulted in. Nonetheless, it is possible to end-up in a situation where the device mapping has been removed from Stage-2 (userspace munmaped the VFIO region, and the MMU notifier did its job), but present in a userspace mapping (userpace has mapped it back at the same address). In such a situation, the device mapping will be demand-paged as the guest performs memory accesses. This requires to be careful when dealing with mapping size, cache management, and to handle potential execution of a device mapping. Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13KVM: arm/arm64: vgic: Don't rely on the wrong pending tableZenghui Yu1-3/+3
commit ca185b260951d3b55108c0b95e188682d8a507b7 upstream. It's possible that two LPIs locate in the same "byte_offset" but target two different vcpus, where their pending status are indicated by two different pending tables. In such a scenario, using last_byte_offset optimization will lead KVM relying on the wrong pending table entry. Let us use last_ptr instead, which can be treated as a byte index into a pending table and also, can be vcpu specific. Fixes: 280771252c1b ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES") Cc: stable@vger.kernel.org Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-15KVM: Add a comment describing the /dev/kvm no_compat handlingMarc Zyngier1-0/+7
Add a comment explaining the rational behind having both no_compat open and ioctl callbacks to fend off compat tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=nMarc Zyngier1-1/+7
On a system without KVM_COMPAT, we prevent IOCTLs from being issued by a compat task. Although this prevents most silly things from happening, it can still confuse a 32bit userspace that is able to open the kvm device (the qemu test suite seems to be pretty mad with this behaviour). Take a more radical approach and return a -ENODEV to the compat task. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-14/+34
Pull kvm fixes from Paolo Bonzini: "Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts, DAX/ZONE_DEVICE, and module unload/reload" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved KVM: VMX: Introduce pi_is_pir_empty() helper KVM: VMX: Do not change PID.NDST when loading a blocked vCPU KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON KVM: X86: Fix initialization of MSR lists KVM: fix placement of refcount initialization KVM: Fix NULL-ptr deref after kvm_create_vm fails
2019-11-12KVM: MMU: Do not treat ZONE_DEVICE pages as being reservedSean Christopherson1-3/+23
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl Reported-by: Adam Borowski <kilobyte@angband.pl> Analyzed-by: David Hildenbrand <david@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11KVM: fix placement of refcount initializationPaolo Bonzini1-2/+2
Reported by syzkaller: ============================= WARNING: suspicious RCU usage ----------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by repro_11/12688. stack backtrace: Call Trace: dump_stack+0x7d/0xc5 lockdep_rcu_suspicious+0x123/0x170 kvm_dev_ioctl+0x9a9/0x1260 [kvm] do_vfs_ioctl+0x1a1/0xfb0 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x73/0xb0 do_syscall_64+0x108/0xaa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit a97b0e773e4 (kvm: call kvm_arch_destroy_vm if vm creation fails) sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm() fails, we need to decrease this count. By moving it earlier, we can push the decrease to out_err_no_arch_destroy_vm without introducing yet another error label. syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000 Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com Fixes: a97b0e773e49 ("kvm: call kvm_arch_destroy_vm if vm creation fails") Cc: Jim Mattson <jmattson@google.com> Analyzed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11KVM: Fix NULL-ptr deref after kvm_create_vm failsPaolo Bonzini1-9/+9
Reported by syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0 RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121 Call Trace: kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline] kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696 ksys_ioctl+0x62/0x90 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718 do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit 9121923c457d ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails initialization, NULL will be returned instead of error code, NULL will not be intercepted in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch fixes it. Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that was also reported by syzkaller: wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline] synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline] so do it. Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com Fixes: 9121923c457d ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") Cc: Jim Mattson <jmattson@google.com> Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-04kvm: x86: mmu: Recovery of shattered NX large pagesJunaid Shahid1-0/+28
The page table pages corresponding to broken down large pages are zapped in FIFO order, so that the large page can potentially be recovered, if it is not longer being used for execution. This removes the performance penalty for walking deeper EPT page tables. By default, one large page will last about one hour once the guest reaches a steady state. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04kvm: Add helper function for creating VM worker threadsJunaid Shahid1-0/+84
Add a function to create a kernel thread associated with a given VM. In particular, it ensures that the worker thread inherits the priority and cgroups of the calling thread. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-31kvm: call kvm_arch_destroy_vm if vm creation failsJim Mattson1-5/+7
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but then fail later in the function, we need to call kvm_arch_destroy_vm() so that it can do any necessary cleanup (like freeing memory). Fixes: 44a95dae1d229a ("KVM: x86: Detect and Initialize AVIC support") Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com> [Remove dependency on "kvm: Don't clear reference count on kvm_create_vm() error path" which was not committed. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-25kvm: Allocate memslots and buses before calling kvm_arch_init_vmJim Mattson1-19/+21
This reorganization will allow us to call kvm_arch_destroy_vm in the event that kvm_create_vm fails after calling kvm_arch_init_vm. Suggested-by: Junaid Shahid <junaids@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge tag 'kvmarm-fixes-5.4-2' of ↵Paolo Bonzini1-13/+35
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow
2019-10-22KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabledWanpeng Li1-13/+16
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host side polling is disabled. Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-20KVM: arm64: pmu: Reset sample period on overflow handlingMarc Zyngier1-0/+20
The PMU emulation code uses the perf event sample period to trigger the overflow detection. This works fine for the *first* overflow handling, but results in a huge number of interrupts on the host, unrelated to the number of interrupts handled in the guest (a x20 factor is pretty common for the cycle counter). On a slow system (such as a SW model), this can result in the guest only making forward progress at a glacial pace. It turns out that the clue is in the name. The sample period is exactly that: a period. And once the an overflow has occured, the following period should be the full width of the associated counter, instead of whatever the guest had initially programed. Reset the sample period to the architected value in the overflow handler, which now results in a number of host interrupts that is much closer to the number of interrupts in the guest. Fixes: b02386eb7dac ("arm64: KVM: Add PMU overflow interrupt routing") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel eventMarc Zyngier1-3/+3
The current convention for KVM to request a chained event from the host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED). But as it turns out, this bit gets set *after* we create the kernel event that backs our virtual counter, meaning that we never get a 64bit counter. Moving the setting to an earlier point solves the problem. Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20KVM: arm64: pmu: Fix cycle counter truncationMarc Zyngier1-10/+12
When a counter is disabled, its value is sampled before the event is being disabled, and the value written back in the shadow register. In that process, the value gets truncated to 32bit, which is adequate for any counter but the cycle counter (defined as a 64bit counter). This obviously results in a corrupted counter, and things like "perf record -e cycles" not working at all when run in a guest... A similar, but less critical bug exists in kvm_pmu_get_counter_value. Make the truncation conditional on the counter not being the cycle counter, which results in a minor code reorganisation. Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-03Merge tag 'kvmarm-fixes-5.4-1' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #1 - Remove the now obsolete hyp_alternate_select construct - Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-09-30kvm: x86, powerpc: do not allow clearing largepages debugfs entryPaolo Bonzini1-3/+7
The largepages debugfs entry is incremented/decremented as shadow pages are created or destroyed. Clearing it will result in an underflow, which is harmless to KVM but ugly (and could be misinterpreted by tools that use debugfs information), so make this particular statistic read-only. Cc: kvm-ppc@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-85/+305
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-18KVM: coalesced_mmio: add bounds checkingMatt Delco1-8/+11
The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address. This fixes CVE-2019-14821. Cc: stable@vger.kernel.org Fixes: 5f94c1741bdc ("KVM: Add coalesced MMIO support (common part)") Signed-off-by: Matt Delco <delco@chromium.org> Signed-off-by: Jim Mattson <jmattson@google.com> Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com [Use READ_ONCE. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATHZenghui Yu1-1/+1
Commit 49dfe94fe5ad ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h and explains why did the old one work. The same fix should be applied to virt/kvm/arm/vgic/trace.h. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-09KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINEMarc Zyngier1-0/+2
While parts of the VGIC support a large number of vcpus (we bravely allow up to 512), other parts are more limited. One of these limits is visible in the KVM_IRQ_LINE ioctl, which only allows 256 vcpus to be signalled when using the CPU or PPI types. Unfortunately, we've cornered ourselves badly by allocating all the bits in the irq field. Since the irq_type subfield (8 bit wide) is currently only taking the values 0, 1 and 2 (and we have been careful not to allow anything else), let's reduce this field to only 4 bits, and allocate the remaining 4 bits to a vcpu2_index, which acts as a multiplier: vcpu_id = 256 * vcpu2_index + vcpu_index With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2) allowing this to be discovered, it becomes possible to inject PPIs to up to 4096 vcpus. But please just don't. Whilst we're there, add a clarification about the use of KVM_IRQ_LINE on arm, which is not completely conditionned by KVM_CAP_IRQCHIP. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-28Merge tag 'arm64-fixes' of ↵Linus Torvalds4-2/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Hot on the heels of our last set of fixes are a few more for -rc7. Two of them are fixing issues with our virtual interrupt controller implementation in KVM/arm, while the other is a longstanding but straightforward kallsyms fix which was been acked by Masami and resolves an initialisation failure in kprobes observed on arm64. - Fix GICv2 emulation bug (KVM) - Fix deadlock in virtual GIC interrupt injection code (KVM) - Fix kprobes blacklist init failure due to broken kallsyms lookup" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
2019-08-28KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WIMarc Zyngier3-2/+26
A guest is not allowed to inject a SGI (or clear its pending state) by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8). Make sure we correctly emulate the architecture. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is longHeyi Guo1-0/+7
If the ap_list is longer than 256 entries, merge_final() in list_sort() will call the comparison callback with the same element twice, causing a deadlock in vgic_irq_cmp(). Fix it by returning early when irqa == irqb. Cc: stable@vger.kernel.org # 4.7+ Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> [maz: massaged commit log and patch, added Fixes and Cc-stable] Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Use a single IO device per redistributorEric Auger2-58/+24
At the moment we use 2 IO devices per GICv3 redistributor: one one for the RD_base frame and one for the SGI_base frame. Instead we can use a single IO device per redistributor (the 2 frames are contiguous). This saves slots on the KVM_MMIO_BUS which is currently limited to NR_IOBUS_DEVS (1000). This change allows to instantiate up to 512 redistributors and may speed the guest boot with a large number of VCPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Remove spurious semicolonsMarc Zyngier1-1/+1
Detected by Coccinelle (and Will Deacon) using scripts/coccinelle/misc/semicolon.cocci. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 01:00:16 +0300