summaryrefslogtreecommitdiff
path: root/virt/kvm
AgeCommit message (Collapse)AuthorFilesLines
2015-09-17Merge tag 'kvm-arm-for-4.3-rc2-2' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master Second set of KVM/ARM changes for 4.3-rc2 - Workaround for a Cortex-A57 erratum - Bug fix for the debugging infrastructure - Fix for 32bit guests with more than 4GB of address space on a 32bit host - A number of fixes for the (unusual) case when we don't use the in-kernel GIC emulation - Removal of ThumbEE handling on arm64, since these have been dropped from the architecture before anyone actually ever built a CPU - Remove the KVM_ARM_MAX_VCPUS limitation which has become fairly pointless
2015-09-17arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'Ming Lei1-1/+1
This patch removes config option of KVM_ARM_MAX_VCPUS, and like other ARCHs, just choose the maximum allowed value from hardware, and follows the reasons: 1) from distribution view, the option has to be defined as the max allowed value because it need to meet all kinds of virtulization applications and need to support most of SoCs; 2) using a bigger value doesn't introduce extra memory consumption, and the help text in Kconfig isn't accurate because kvm_vpu structure isn't allocated until request of creating VCPU is sent from QEMU; 3) the main effect is that the field of vcpus[] in 'struct kvm' becomes a bit bigger(sizeof(void *) per vcpu) and need more cache lines to hold the structure, but 'struct kvm' is one generic struct, and it has worked well on other ARCHs already in this way. Also, the world switch frequecy is often low, for example, it is ~2000 when running kernel building load in VM from APM xgene KVM host, so the effect is very small, and the difference can't be observed in my test at all. Cc: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16KVM: add halt_attempted_poll to VCPU statsPaolo Bonzini1-0/+1
This new statistic can help diagnosing VCPUs that, for any reason, trigger bad behavior of halt_poll_ns autotuning. For example, say halt_poll_ns = 480000, and wakeups are spaced exactly like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes 10+20+40+80+160+320+480 = 1110 microseconds out of every 479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then is consuming about 30% more CPU than it would use without polling. This would show as an abnormally high number of attempted polling compared to the successful polls. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com< Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: fix zero length mmio searchingJason Wang1-2/+17
Currently, if we had a zero length mmio eventfd assigned on KVM_MMIO_BUS. It will never be found by kvm_io_bus_cmp() since it always compares the kvm_io_range() with the length that guest wrote. This will cause e.g for vhost, kick will be trapped by qemu userspace instead of vhost. Fixing this by using zero length if an iodevice is zero length. Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: fix double free for fast mmio eventfdJason Wang1-18/+25
We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: factor out core eventfd assign/deassign logicJason Wang1-35/+50
This patch factors out core eventfd assign/deassign logic and leaves the argument checking and bus index selection to callers. Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfdJason Wang1-2/+2
We only want zero length mmio eventfd to be registered on KVM_FAST_MMIO_BUS. So check this explicitly when arg->len is zero to make sure this. Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14KVM: make the declaration of functions within 80 charactersWei Yang1-2/+2
After 'commit 0b8ba4a2b658 ("KVM: fix checkpatch.pl errors in kvm/coalesced_mmio.h")', the declaration of the two function will exceed 80 characters. This patch reduces the TAPs to make each line in 80 characters. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14Merge tag 'kvm-arm-for-4.3-rc2' of ↵Paolo Bonzini2-16/+34
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM changes for 4.3-rc2 - Fix timer interrupt injection after the rework that went in during the merge window - Reset the timer to zero on reboot - Make sure the TCR_EL2 RES1 bits are really set to 1 - Fix a PSCI affinity bug for non-existing vcpus
2015-09-14KVM: fix polling for guest halt continued even if disable itWanpeng Li1-1/+2
If there is already some polling ongoing, it's impossible to disable the polling, since as soon as somebody sets halt_poll_ns to 0, polling will never stop, as grow and shrink are only handled if halt_poll_ns is != 0. This patch fix it by reset vcpu->halt_poll_ns in order to stop polling when polling is disabled. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+31
Merge third patch-bomb from Andrew Morton: - even more of the rest of MM - lib/ updates - checkpatch updates - small changes to a few scruffy filesystems - kmod fixes/cleanups - kexec updates - a dma-mapping cleanup series from hch * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) dma-mapping: consolidate dma_set_mask dma-mapping: consolidate dma_supported dma-mapping: cosolidate dma_mapping_error dma-mapping: consolidate dma_{alloc,free}_noncoherent dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent} mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd() mm: make sure all file VMAs have ->vm_ops set mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff() mm: mark most vm_operations_struct const namei: fix warning while make xmldocs caused by namei.c ipc: convert invalid scenarios to use WARN_ON zlib_deflate/deftree: remove bi_reverse() lib/decompress_unlzma: Do a NULL check for pointer lib/decompressors: use real out buf size for gunzip with kernel fs/affs: make root lookup from blkdev logical size sysctl: fix int -> unsigned long assignments in INT_MIN case kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo kexec: align crash_notes allocation to make it be inside one physical page kexec: remove unnecessary test in kimage_alloc_crash_control_pages() kexec: split kexec_load syscall from kexec core code ...
2015-09-10mmu-notifier: add clear_young callbackVladimir Davydov1-0/+31
In the scope of the idle memory tracking feature, which is introduced by the following patch, we need to clear the referenced/accessed bit not only in primary, but also in secondary ptes. The latter is required in order to estimate wss of KVM VMs. At the same time we want to avoid flushing tlb, because it is quite expensive and it won't really affect the final result. Currently, there is no function for clearing pte young bit that would meet our requirements, so this patch introduces one. To achieve that we have to add a new mmu-notifier callback, clear_young, since there is no method for testing-and-clearing a secondary pte w/o flushing tlb. The new method is not mandatory and currently only implemented by KVM. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08kvm: irqchip: fix memory leakSudip Mukherjee1-2/+6
We were taking the exit path after checking ue->flags and return value of setup_routing_entry(), but 'e' was not freed incase of a failure. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-06KVM: trace kvm_halt_poll_ns grow/shrinkWanpeng Li1-2/+6
Tracepoint for dynamic halt_pool_ns, fired on every potential change. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-06KVM: dynamic halt-pollingWanpeng Li1-2/+51
There is a downside of always-poll since poll is still happened for idle vCPUs which can waste cpu usage. This patchset add the ability to adjust halt_poll_ns dynamically, to grow halt_poll_ns when shot halt is detected, and to shrink halt_poll_ns when long halt is detected. There are two new kernel parameters for changing the halt_poll_ns: halt_poll_ns_grow and halt_poll_ns_shrink. no-poll always-poll dynamic-poll ----------------------------------------------------------------------- Idle (nohz) vCPU %c0 0.15% 0.3% 0.2% Idle (250HZ) vCPU %c0 1.1% 4.6%~14% 1.2% TCP_RR latency 34us 27us 26.7us "Idle (X) vCPU %c0" is the percent of time the physical cpu spent in c0 over 60 seconds (each vCPU is pinned to a pCPU). (nohz) means the guest was tickless. (250HZ) means the guest was ticking at 250HZ. The big win is with ticking operating systems. Running the linux guest with nohz=off (and HZ=250), we save 3.4%~12.8% CPUs/second and get close to no-polling overhead levels by using the dynamic-poll. The savings should be even higher for higher frequency ticks. Suggested-by: David Matlack <dmatlack@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Simplify the patch. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-06KVM: make halt_poll_ns per-vCPUWanpeng Li1-2/+3
Change halt_poll_ns into per-VCPU variable, seeded from module parameter, to allow greater flexibility. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-04arm/arm64: KVM: arch timer: Reset CNTV_CTL to 0Christoffer Dall1-0/+8
Provide a better quality of implementation and be architecture compliant on ARMv7 for the architected timer by resetting the CNTV_CTL to 0 on reset of the timer. This change alone fixes the UEFI reset issue reported by Laszlo back in February. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Drew Jones <drjones@redhat.com> Cc: Wei Huang <wei@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-04arm/arm64: KVM: vgic: Move active state handling to flush_hwstateChristoffer Dall1-16/+26
We currently set the physical active state only when we *inject* a new pending virtual interrupt, but this is actually not correct, because we could have been preempted and run something else on the system that resets the active state to clear. This causes us to run the VM with the timer set to fire, but without setting the physical active state. The solution is to always check the LR configurations, and we if have a mapped interrupt in the LR in either the pending or active state (virtual), then set the physical active state. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-23Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into ↵Paolo Bonzini2-14/+10
kvm-queue Patch queue for ppc - 2015-08-22 Highlights for KVM PPC this time around: - Book3S: A few bug fixes - Book3S: Allow micro-threading on POWER8
2015-08-12KVM: arm/arm64: timer: Allow the timer to control the active stateMarc Zyngier1-7/+22
In order to remove the crude hack where we sneak the masked bit into the timer's control register, make use of the phys_irq_map API control the active state of the interrupt. This causes some limited changes to allow for potential error propagation. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Prevent userspace injection of a mapped interruptMarc Zyngier1-33/+70
Virtual interrupts mapped to a HW interrupt should only be triggered from inside the kernel. Otherwise, you could end up confusing the kernel (and the GIC's) state machine. Rearrange the injection path so that kvm_vgic_inject_irq is used for non-mapped interrupts, and kvm_vgic_inject_mapped_irq is used for mapped interrupts. The latter should only be called from inside the kernel (timer, irqfd). Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Add vgic_{get,set}_phys_irq_activeMarc Zyngier1-0/+24
In order to control the active state of an interrupt, introduce a pair of accessors allowing the state to be set/queried. This only affects the logical state, and the HW state will only be applied at world-switch time. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guestMarc Zyngier1-3/+86
To allow a HW interrupt to be injected into a guest, we lookup the guest virtual interrupt in the irq_phys_map list, and if we have a match, encode both interrupts in the LR. We also mark the interrupt as "active" at the host distributor level. On guest EOI on the virtual interrupt, the host interrupt will be deactivated. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interruptsMarc Zyngier1-1/+208
In order to be able to feed physical interrupts to a guest, we need to be able to establish the virtual-physical mapping between the two worlds. The mappings are kept in a set of RCU lists, indexed by virtual interrupts. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQsMarc Zyngier1-1/+1
We only set the irq_queued flag for level interrupts, meaning that "!vgic_irq_is_queued(vcpu, irq)" is a good enough predicate for all interrupts. This will allow us to inject edge HW interrupts, for which the state ACTIVE+PENDING is not allowed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-12KVM: arm/arm64: vgic: Allow HW irq to be encoded in LRMarc Zyngier2-4/+33
Now that struct vgic_lr supports the LR_HW bit and carries a hwirq field, we can encode that information into the list registers. This patch provides implementations for both GICv2 and GICv3. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-30KVM: document memory barriers for kvm->vcpus/kvm->online_vcpusPaolo Bonzini1-0/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-29KVM: move code related to KVM_SET_BOOT_CPU_ID to x86Paolo Bonzini1-14/+0
This is another remnant of ia64 support. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-10KVM: count number of assigned devicesPaolo Bonzini1-0/+5
If there are no assigned devices, the guest PAT are not providing any useful information and can be overridden to writeback; VMX always does this because it has the "IPAT" bit in its extended page table entries, but SVM does not have anything similar. Hook into VFIO and legacy device assignment so that they provide this information to KVM. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03sched, preempt_notifier: separate notifier registration from static_key inc/decPeter Zijlstra1-0/+3
Commit 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") had two problems. First, the preempt-notifier API needs to sleep with the addition of the static_key, we do however need to hold off preemption while modifying the preempt notifier list, otherwise a preemption could observe an inconsistent list state. KVM correctly registers and unregisters preempt notifiers with preemption disabled, so the sleep caused dmesg splats. Second, KVM registers and unregisters preemption notifiers very often (in vcpu_load/vcpu_put). With a single uniprocessor guest the static key would move between 0 and 1 continuously, hitting the slow path on every userspace exit. To fix this, wrap the static_key inc/dec in a new API, and call it from KVM. Fixes: 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-24Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Mostly refactoring/clean-up: - CPU ops and PSCI (Power State Coordination Interface) refactoring following the merging of the arm64 ACPI support, together with handling of Trusted (secure) OS instances - Using fixmap for permanent FDT mapping, removing the initial dtb placement requirements (within 512MB from the start of the kernel image). This required moving the FDT self reservation out of the memreserve processing - Idmap (1:1 mapping used for MMU on/off) handling clean-up - Removing flush_cache_all() - not safe on ARM unless the MMU is off. Last stages of CPU power down/up are handled by firmware already - "Alternatives" (run-time code patching) refactoring and support for immediate branch patching, GICv3 CPU interface access - User faults handling clean-up And some fixes: - Fix for VDSO building with broken ELF toolchains - Fix another case of init_mm.pgd usage for user mappings (during ASID roll-over broadcasting) - Fix for FPSIMD reloading after CPU hotplug - Fix for missing syscall trace exit - Workaround for .inst asm bug - Compat fix for switching the user tls tpidr_el0 register" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits) arm64: use private ratelimit state along with show_unhandled_signals arm64: show unhandled SP/PC alignment faults arm64: vdso: work-around broken ELF toolchains in Makefile arm64: kernel: rename __cpu_suspend to keep it aligned with arm arm64: compat: print compat_sp instead of sp arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP arm64: entry: fix context tracking for el0_sp_pc arm64: defconfig: enable memtest arm64: mm: remove reference to tlb.S from comment block arm64: Do not attempt to use init_mm in reset_context() arm64: KVM: Switch vgic save/restore to alternative_insn arm64: alternative: Introduce feature for GICv3 CPU interface arm64: psci: fix !CONFIG_HOTPLUG_CPU build warning arm64: fix bug for reloading FPSIMD state after CPU hotplug. arm64: kernel thread don't need to save fpsimd context. arm64: fix missing syscall trace exit arm64: alternative: Work around .inst assembler bugs arm64: alternative: Merge alternative-asm.h into alternative.h arm64: alternative: Allow immediate branch as alternative instruction arm64: Rework alternate sequence for ARM erratum 845719 ...
2015-06-19KVM: fix checkpatch.pl errors in kvm/coalesced_mmio.hKevin Mulvey1-2/+2
Tabs rather than spaces Signed-off-by: Kevin Mulvey <kmulvey@linux.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: fix checkpatch.pl errors in kvm/async_pf.hKevin Mulvey1-2/+2
fix brace spacing Signed-off-by: Kevin Mulvey <kmulvey@linux.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19kvm: irqchip: Break up high order allocations of kvm_irq_routing_tableJoerg Roedel1-8/+33
The allocation size of the kvm_irq_routing_table depends on the number of irq routing entries because they are all allocated with one kzalloc call. When the irq routing table gets bigger this requires high order allocations which fail from time to time: qemu-kvm: page allocation failure: order:4, mode:0xd0 This patch fixes this issue by breaking up the allocation of the table and its entries into individual kzalloc calls. These could all be satisfied with order-0 allocations, which are less likely to fail. The downside of this change is the lower performance, because of more calls to kzalloc. But given how often kvm_set_irq_routing is called in the lifetime of a guest, it doesn't really matter much. Signed-off-by: Joerg Roedel <jroedel@suse.de> [Avoid sparse warning through rcu_access_pointer. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19Merge tag 'kvm-arm-for-4.2' of ↵Paolo Bonzini2-12/+51
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM changes for v4.2: - Proper guest time accounting - FP access fix for 32bit - The usual pile of GIC fixes - PSCI fixes - Random cleanups
2015-06-18KVM: arm/arm64: vgic: Remove useless arm-gic.h #includeMarc Zyngier1-2/+0
Back in the days, vgic.c used to have an intimate knowledge of the actual GICv2. These days, this has been abstracted away into hardware-specific backends. Remove the now useless arm-gic.h #include directive, making it clear that GICv2 specific code doesn't belong here. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-17KVM: arm/arm64: vgic: Avoid injecting reserved IRQ numbersMarc Zyngier1-4/+1
Commit fd1d0ddf2ae9 (KVM: arm/arm64: check IRQ number on userland injection) rightly limited the range of interrupts userspace can inject in a guest, but failed to consider the (unlikely) case where a guest is configured with 1024 interrupts. In this case, interrupts ranging from 1020 to 1023 are unuseable, as they have a special meaning for the GIC CPU interface. Make sure that these number cannot be used as an IRQ. Also delete a redundant (and similarily buggy) check in kvm_set_irq. Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Andre Przywara <andre.przywara@arm.com> Cc: <stable@vger.kernel.org> # 4.1, 4.0, 3.19, 3.18 Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-17KVM: arm: vgic: Drop useless Group0 warningMarc Zyngier1-2/+0
If a GICv3-enabled guest tries to configure Group0, we print a warning on the console (because we don't support Group0 interrupts). This is fairly pointless, and would allow a guest to spam the console. Let's just drop the warning. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-12arm64: KVM: Switch vgic save/restore to alternative_insnMarc Zyngier1-3/+0
So far, we configured the world-switch by having a small array of pointers to the save and restore functions, depending on the GIC used on the platform. Loading these values each time is a bit silly (they never change), and it makes sense to rely on the instruction patching instead. This leads to a nice cleanup of the code. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-09KVM: arm64: add active register handling to GICv3 emulation as wellAndre Przywara1-4/+50
Commit 47a98b15ba7c ("arm/arm64: KVM: support for un-queuing active IRQs") introduced handling of the GICD_I[SC]ACTIVER registers, but only for the GICv2 emulation. For the sake of completeness and as this is a pre-requisite for save/restore of the GICv3 distributor state, we should also emulate their handling in the distributor and redistributor frames of an emulated GICv3. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-05KVM: implement multiple address spacesPaolo Bonzini1-27/+43
Only two ioctls have to be modified; the address space id is placed in the higher 16 bits of their slot id argument. As of this patch, no architecture defines more than one address space; x86 will be the first. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05KVM: add vcpu-specific functions to read/write/translate GFNsPaolo Bonzini1-13/+154
We need to hide SMRAM from guests not running in SMM. Therefore, all uses of kvm_read_guest* and kvm_write_guest* must be changed to use different address spaces, depending on whether the VCPU is in system management mode. We need to introduce a new family of functions for this purpose. For now, the VCPU-based functions have the same behavior as the existing per-VM ones, they just accept a different type for the first argument. Later however they will be changed to use one of many "struct kvm_memslots" stored in struct kvm, through an architecture hook. VM-based functions will unconditionally use the first memslots pointer. Whenever possible, this patch introduces slot-based functions with an __ prefix, with two wrappers for generic and vcpu-based actions. The exceptions are kvm_read_guest and kvm_write_guest, which are copied into the new functions kvm_vcpu_read_guest and kvm_vcpu_write_guest. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: remove unused argument from mark_page_dirty_in_slotPaolo Bonzini1-7/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: remove __gfn_to_pfnPaolo Bonzini1-24/+15
Most of the function that wrap it can be rewritten without it, except for gfn_to_pfn_prot. Just inline it into gfn_to_pfn_prot, and rewrite the other function on top of gfn_to_pfn_memslot*. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: pass kvm_memory_slot to gfn_to_page_many_atomicPaolo Bonzini1-3/+3
The memory slot is already available from gfn_to_memslot_dirty_bitmap. Isn't it a shame to look it up again? Plus, it makes gfn_to_page_many_atomic agnostic of multiple VCPU address spaces. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: add "new" argument to kvm_arch_commit_memory_regionPaolo Bonzini1-1/+1
This lets the function access the new memory slot without going through kvm_memslots and id_to_memslot. It will simplify the code when more than one address space will be supported. Unfortunately, the "const"ness of the new argument must be casted away in two places. Fixing KVM to accept const struct kvm_memory_slot pointers would require modifications in pretty much all architectures, and is left for later. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: add memslots argument to kvm_arch_memslots_updatedPaolo Bonzini1-1/+1
Prepare for the case of multiple address spaces. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: const-ify uses of struct kvm_userspace_memory_regionPaolo Bonzini1-11/+11
Architecture-specific helpers are not supposed to muck with struct kvm_userspace_memory_region contents. Add const to enforce this. In order to eliminate the only write in __kvm_set_memory_region, the cleaning of deleted slots is pulled up from update_memslots to __kvm_set_memory_region. Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: use kvm_memslots whenever possiblePaolo Bonzini1-6/+10
kvm_memslots provides lockdep checking. Use it consistently instead of explicit dereferencing of kvm->memslots. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: introduce kvm_alloc/free_memslotsPaolo Bonzini1-49/+55
kvm_alloc_memslots is extracted out of previously scattered code that was in kvm_init_memslots_id and kvm_create_vm. kvm_free_memslot and kvm_free_memslots are new names of kvm_free_physmem and kvm_free_physmem_slot, but they also take an explicit pointer to struct kvm_memslots. This will simplify the transition to multiple address spaces, each represented by one pointer to struct kvm_memslots. Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 05:04:15 +0300