| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
|
|
lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:
d8b0f5465012538c ("wire up syscalls for statmount/listmount")
5f42375904b08890 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
|
|
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.
Update metric constraints for architectures with topdown l2 events.
Conversion script updated in:
https://github.com/intel/perfmon/pull/128
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZZam-EG-UepcXtWw@kernel.org/
Link: https://lore.kernel.org/r/20240104231903.775717-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
a5d3df8ae13fada7 ("KVM: remove deprecated UAPIs")
6d72283526090850 ("KVM x86/xen: add an override for PVCLOCK_TSC_STABLE_BIT")
89ea60c2c7b5838b ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
8dd2eee9d526c30f ("KVM: x86/mmu: Handle page fault for private memory")
a7800aa80ea4d535 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
5a475554db1e476a ("KVM: Introduce per-page memory attributes")
16f95f3b95caded2 ("KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace")
bb58b90b1a8f753b ("KVM: Introduce KVM_SET_USER_MEMORY_REGION2")
3f9cd0ca848413fd ("KVM: arm64: Allow userspace to get the writable masks for feature ID registers")
That automatically adds support for some new ioctls and remove a bunch
of deprecated ones.
This ends up making the new binary to forget about the deprecated one,
so when used in an older system it will not be able to resolve those
codes to strings.
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-27 14:48:16.523014020 -0300
+++ after 2024-01-27 14:48:24.183932866 -0300
@@ -14,6 +14,7 @@
[0x46] = "SET_USER_MEMORY_REGION",
[0x47] = "SET_TSS_ADDR",
[0x48] = "SET_IDENTITY_MAP_ADDR",
+ [0x49] = "SET_USER_MEMORY_REGION2",
[0x60] = "CREATE_IRQCHIP",
[0x61] = "IRQ_LINE",
[0x62] = "GET_IRQCHIP",
@@ -22,14 +23,8 @@
[0x65] = "GET_PIT",
[0x66] = "SET_PIT",
[0x67] = "IRQ_LINE_STATUS",
- [0x69] = "ASSIGN_PCI_DEVICE",
[0x6a] = "SET_GSI_ROUTING",
- [0x70] = "ASSIGN_DEV_IRQ",
[0x71] = "REINJECT_CONTROL",
- [0x72] = "DEASSIGN_PCI_DEVICE",
- [0x73] = "ASSIGN_SET_MSIX_NR",
- [0x74] = "ASSIGN_SET_MSIX_ENTRY",
- [0x75] = "DEASSIGN_DEV_IRQ",
[0x76] = "IRQFD",
[0x77] = "CREATE_PIT2",
[0x78] = "SET_BOOT_CPU_ID",
@@ -66,7 +61,6 @@
[0x9f] = "GET_VCPU_EVENTS",
[0xa0] = "SET_VCPU_EVENTS",
[0xa3] = "ENABLE_CAP",
- [0xa4] = "ASSIGN_SET_INTX_MASK",
[0xa5] = "SIGNAL_MSI",
[0xa6] = "GET_XCRS",
[0xa7] = "SET_XCRS",
@@ -97,6 +91,8 @@
[0xcd] = "SET_SREGS2",
[0xce] = "GET_STATS_FD",
[0xd0] = "XEN_HVM_EVTCHN_SEND",
+ [0xd2] = "SET_MEMORY_ATTRIBUTES",
+ [0xd4] = "CREATE_GUEST_MEMFD",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chao Peng <chao.p.peng@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZbVLbkngp4oq13qN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq drivers and the cpupower utility.
Specifics:
- Fix the handling of scaling_max/min_freq sysfs attributes in the
AMD P-state cpufreq driver (Mario Limonciello)
- Make the intel_pstate cpufreq driver avoid unnecessary computation
of the HWP performance level corresponding to a given frequency in
the cases when it is known already, which also helps to avoid
reducing the maximum CPU capacity artificially on some systems
(Rafael J. Wysocki)
- Fix compilation of the cpupower utility when CFLAGS is passed as a
make argument for cpupower, but it does not take effect as expected
due to mishandling (Stanley Chan)"
* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
tools cpupower bench: Override CFLAGS assignments
|
|
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.
The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.
Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.
Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:
# selftests: net: udpgro_frglist.sh
# ipv6
# tcp - over veth touching data
# -l 4 -6 -D 2001:db8::1 -t rx -4 -t
# Error: TC classifier not found.
# We have an error talking to the kernel
# Error: TC classifier not found.
# We have an error talking to the kernel
Add the missing knob.
Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:
# selftests: net: big_tcp.sh
# Error: Failed to load TC action module.
# We have an error talking to the kernel
...
# Testing for BIG TCP:
# CLI GSO | GW GRO | GW GSO | SER GRO
# ./big_tcp.sh: line 107: test: !=: unary operator expected
...
# on on on on : [FAIL_on_link1]
Add the missing configs
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KVM/riscv changes for 6.8 part #2
- Zbc extension support for Guest/VM
- Scalar crypto extensions support for Guest/VM
- Vector crypto extensions support for Guest/VM
- Zfh[min] extensions support for Guest/VM
- Zihintntl extension support for Guest/VM
- Zvfh[min] extensions support for Guest/VM
- Zfa extension support for Guest/VM
|
|
the definition of calloc is as follows:
void *calloc(size_t nmemb, size_t size);
number of members is in the first parameter and the size is in the
second parameter.
Fix error messages on gcc 14 20240102:
error: 'calloc' sizes specified with 'sizeof' in the earlier argument and
not in the later argument [-Werror=calloc-transposed-args]
Committer notes:
I noticed this on fedora 40 and rawhide.
Signed-off-by: Sun Haiyong <sunhaiyong@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240106094129.3337057-1-siyanteng@loongson.cn
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
builtin-top.c: In function ‘prompt_integer’:
builtin-top.c:360:21: error: allocation of insufficient size ‘0’ for
type ‘char’ with size ‘1’ [-Werror=alloc-size]
360 | char *buf = malloc(0), *p;
| ^~~~~~
Just set it to NULL, getline() will do the allocation.
Signed-off-by: Sun Haiyong <sunhaiyong@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231204082055.91877-1-siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf build failed due to the shellcheck on my machine (v0.4.6 on Ubuntu
18.04.1 LTS) doesn't support -a/--check-sourced and -S/--severity option.
These two options are introduced in shellcheck v0.4.7 and v0.6.0
respectively. So restrict the minimal version of shellcheck to v0.6.0.
Fixes: b809fc656e763296 ("perf build: Shellcheck support for OUTPUT directory")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20240122080406.28678-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
DRM_IOCTL_MODE_CLOSEFB
Picking the changes from:
8570c27932e132d2 ("drm/syncobj: Add deadline support for syncobj waits")
9724ed6c1b1212d1 ("drm: Introduce DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT")
e4d983acffff270c ("drm: introduce DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP")
d208d875667e2a29 ("drm: introduce CLOSEFB IOCTL")
afa5cf3175a22b71 ("drm/i915/uapi: fix typos/spellos and punctuation")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl command into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-26 10:54:23.486381862 -0300
+++ after 2024-01-26 10:54:35.767902442 -0300
@@ -109,6 +109,7 @@
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
[0xCF] = "SYNCOBJ_EVENTFD",
+ [0xD0] = "MODE_CLOSEFB",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Simon Ser <contact@emersion.fr>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/lkml/ZbPIN9Dcc5AM0uxo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add an option to write the 'perf list' output to a specific file. This
can avoid issues with debug output being written into the output stream.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using printf() can interrupt 'perf list output', use pr_err() which can
respect debug settings and the debug file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
8a924db2d7b5eb69 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface function")
That don't add anything that is handled by existing hard coded tables or
table generation scripts.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/lkml/ZbJv9fGF_k2xXEdr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
IA32_MKTME_KEYID_PARTITIONING
To pick up the changes in:
765a0542fdc7aad7 ("x86/virt/tdx: Detect TDX during kernel boot")
Addressing this tools/perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2024-01-25 11:08:12.363223880 -0300
+++ after 2024-01-25 11:08:24.839307699 -0300
@@ -21,6 +21,7 @@
[0x0000004f] = "PPIN",
[0x00000060] = "LBR_CORE_TO",
[0x00000079] = "IA32_UCODE_WRITE",
+ [0x00000087] = "IA32_MKTME_KEYID_PARTITIONING",
[0x0000008b] = "AMD64_PATCH_LEVEL",
[0x0000008C] = "IA32_SGXLEPUBKEYHASH0",
[0x0000008D] = "IA32_SGXLEPUBKEYHASH1",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_MKTME_KEYID_PARTITIONING"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_MKTME_KEYID_PARTITIONING"
Using CPUID GenuineIntel-6-8E-A
0x87
New filter for msr:read_msr: (msr==0x87) && (common_pid != 58627 && common_pid != 3792)
0x87
New filter for msr:write_msr: (msr==0x87) && (common_pid != 58627 && common_pid != 3792)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbJt27rjkQVU1YoP@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
STATX_MNT_ID_UNIQUE
To pick the changes from:
98d2b43081972abe ("add unique mount ID")
That add STATX_MNT_ID_UNIQUE that was manually added to
tools/perf/trace/beauty/statx.c, at some point this should move to the
shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbJq08s19890WDo-@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ksm_tests was previously mmapping a region of memory, aligning the
returned pointer to a PMD boundary, then setting MADV_HUGEPAGE, but was
setting it past the end of the mmapped area due to not taking the pointer
alignment into consideration. Fix this behaviour.
Up until commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries"), this buggy behavior was (usually) masked because the
alignment difference was always less than PMD-size. But since the
mentioned commit, `ksm_tests -H -s 100` started failing.
Link: https://lkml.kernel.org/r/20240122120554.3108022-1-ryan.roberts@arm.com
Fixes: 325254899684 ("selftests: vm: add KSM huge pages merging time test")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order for the page table level 5 to be in use, the CPU must have the
setting enabled in addition to the CONFIG option. Check for the flag to be
set to avoid false test failures on systems that do not have this cpu flag
set.
The test does a series of mmap calls including three using the
MAP_FIXED flag and specifying an address that is 1<<47 or 1<<48. These
addresses are only available if you are using level 5 page tables,
which requires both the CPU to have the capabiltiy (la57 flag) and the
kernel to be configured. Currently the test only checks for the kernel
configuration option, so this test can still report a false positive.
Here are the three failing lines:
$ ./va_high_addr_switch | grep FAILED
mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED
mmap(HIGH_ADDR, MAP_FIXED): 0xffffffffffffffff - FAILED
mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED
I thought (for about a second) refactoring the test so that these three
mmap calls will only be run on systems with the level 5 page tables
available, but the whole point of the test is to check the level 5
feature...
Link: https://lkml.kernel.org/r/20240119205801.62769-1-audra@redhat.com
Fixes: 4f2930c6718a ("selftests/vm: only run 128TBswitch with 5-level paging")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Adam Sindelar <adam@wowsignal.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On systems with 64k page size and 512M huge page sizes, the allocation and
test succeeds but errors out at the munmap. As the comment states, munmap
will failure if its not HUGEPAGE aligned. This is due to the length of
the mapping being 1/2 the size of the hugepage causing the munmap to not
be hugepage aligned. Fix this by making the mapping length the full
hugepage if the hugepage is larger than the length of the mapping.
Link: https://lkml.kernel.org/r/20240119131429.172448-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Running charge_reserved_hugetlb.sh generates errors if sh is set to
dash:
./charge_reserved_hugetlb.sh: 9: [[: not found
./charge_reserved_hugetlb.sh: 19: [[: not found
./charge_reserved_hugetlb.sh: 27: [[: not found
./charge_reserved_hugetlb.sh: 37: [[: not found
./charge_reserved_hugetlb.sh: 45: Syntax error: "(" unexpected
Switch to using /bin/bash instead of /bin/sh. Make the switch for
write_hugetlb_memory.sh as well which is called from
charge_reserved_hugetlb.sh.
Link: https://lkml.kernel.org/r/20240116090455.3407378-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use 2 separate variables of types int and unsigned long long instead of
confusing them. This corrects the correct print format for each of them
and removes the build warning:
warning: format `%d' expects argument of type `int', but argument 2 has type `long long unsigned int'
Link: https://lkml.kernel.org/r/20240112071851.612930-1-usama.anjum@collabora.com
Fixes: a4cb3b243343 ("selftests: mm: add a test for remapping to area immediately after existing mapping")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The busywait timeout value is a millisecond, not a second. So the
current setting 2 is too small. On slow/busy host (or VMs) the
current timeout can expire even on "correct" execution, causing random
failures. Let's copy the WAIT_TIMEOUT from forwarding/lib.sh and set
BUSYWAIT_TIMEOUT here.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240124061344.1864484-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default timeout for tests is 45sec, bench-lookups_ipv6
seems to take around 50sec when running in a VM without
HW acceleration. Give it a 2x margin and set the timeout
to 120sec.
Fixes: d1066c9c58d4 ("selftests/net: Add test/benchmark for removing MKTs")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240124233630.1977708-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.
That causes sporadic failures depending on the host load.
Replace the sleep with the existing helper waiting for the desired
port being exposed.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit below introduce a dependency in some net self-tests
towards a newly introduce helper script.
Such script is currently not included into the TEST_PROGS_EXTENDED list
and thus is not installed, causing failure for the relevant tests when
executed from the install dir.
Fix the issue updating the install targets.
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.
That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Still a bit unclear whether each directory should have its own
config file, but assuming they should lets add one for tcp_ao.
The following tests still fail with this config in place:
- rst_ipv4,
- rst_ipv6,
- bench-lookups_ipv6.
other 21 pass.
Fixes: d11301f65977 ("selftests/net: Add TCP-AO ICMPs accept test")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240124192550.1865743-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
|
|
The prio_arp/ns tests hard code the mode to active-backup. At the same
time, The balance-alb/tlb modes do not support arp/ns target. So remove
the prio_arp/ns tests from the loop and only test active-backup mode.
Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests")
Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test is missing a whole bunch of checks for interface
renaming and one ifup. Presumably it was only used on a system
with renaming disabled and NetworkManager running.
Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are missing a lot of config options from net selftests,
it seems:
tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests: CONFIG_NET_SCH_FQ_CODEL
l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf: CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING
gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range: CONFIG_MPTCP
fib_test: CONFIG_NET_CLS_BASIC
rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb: CONFIG_NET_ACT_GACT
tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample: CONFIG_PSAMPLE
fcnal: CONFIG_TCP_MD5SIG
Try to add them in a semi-alphabetical order.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prevent warnings of the form:
tools/testing/cxl/test/mock.c:44:6: error: no previous prototype for
‘__wrap_is_acpi_device_node’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:63:5: error: no previous prototype for
‘__wrap_acpi_table_parse_cedt’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:81:13: error: no previous prototype for
‘__wrap_acpi_evaluate_integer’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/cxl/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543983780.460832.10920261849128601697.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Indexing with mm_cid is incompatible with skipping disallowed cpumask,
because concurrency IDs are based on a virtual ID allocation which is
unrelated to the physical CPU mask.
These issues can be reproduced by running the rseq selftests under a
taskset which excludes CPU 0, e.g.
taskset -c 10-20 ./run_param_test.sh
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow user to specify outside CFLAGS values as make argument
Corrects an issue where CFLAGS is passed as a make argument for
cpupower, but bench's makefile does not inherit and append to them.
Signed-off-by: Stanley Chan <schan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
|
|
When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:
make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds
This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.
I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.
Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
processing patches, switching roles from perf-tools to perf-tools-next
at each Linux release.
Data profiling:
- Associate samples that identify loads and stores with data
structures. This uses events available on Intel, AMD and others and
DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
$ perf report -s type,typeoff --hierarchy --group --stdio
...
#
# Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
# Event count (approx.): 602758064
#
# Overhead Data Type / Data Type Offset
# ........................... ............................
#
26.09% 3.28% 0.00% long unsigned int
26.09% 3.28% 0.00% long unsigned int +0 (no field)
18.48% 0.73% 0.00% struct page
10.83% 0.02% 0.00% struct page +8 (lru.next)
3.90% 0.28% 0.00% struct page +0 (flags)
3.45% 0.06% 0.00% struct page +24 (mapping)
0.25% 0.28% 0.00% struct page +48 (_mapcount.counter)
0.02% 0.06% 0.00% struct page +32 (index)
0.02% 0.00% 0.00% struct page +52 (_refcount.counter)
0.02% 0.01% 0.00% struct page +56 (memcg_data)
0.00% 0.01% 0.00% struct page +16 (lru.prev)
15.37% 17.54% 0.00% (stack operation)
15.37% 17.54% 0.00% (stack operation) +0 (no field)
11.71% 50.27% 0.00% (unknown)
11.71% 50.27% 0.00% (unknown) +0 (no field)
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
$ perf annotate --data-type=page --group
Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
event[0] = cpu/mem-loads,ldlat=4/P
event[1] = cpu/mem-stores/P
event[2] = dummy:u
===================================================================================
samples offset size field
447 33 0 0 64 struct page {
108 8 0 0 8 long unsigned int flags;
319 13 0 8 40 union {
319 13 0 8 40 struct {
236 2 0 8 16 union {
236 2 0 8 16 struct list_head lru {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct {
236 1 0 8 8 void* __filler;
0 1 0 16 4 unsigned int mlock_count;
};
236 2 0 8 16 struct list_head buddy_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct list_head pcp_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
};
82 4 0 24 8 struct address_space* mapping;
1 7 0 32 8 union {
1 7 0 32 8 long unsigned int index;
1 7 0 32 8 long unsigned int share;
};
0 0 0 40 8 long unsigned int private;
};
This uses the existing annotate code, calling objdump to do the
disassembly, with improvements to avoid having this take too long,
but longer term a switch to a disassembler library, possibly
reusing code in the kernel will be pursued.
This is the initial implementation, please use it and report
impressions and bugs. Make sure the kernel-debuginfo packages match
the running kernel. The 'perf report' phase for non short perf.data
files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X,
using a distro kernel, while doing a simple 'find /' on an
otherwise idle system resulted in:
# uname -r
6.6.9-100.fc38.x86_64
# perf -vv | grep BPF_
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
# rpm -qa | grep kernel-debuginfo
kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
kernel-debuginfo-6.6.9-100.fc38.x86_64
#
# perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
#
# ls -la perf.data
-rw-------. 1 root root 2346486 Jan 9 18:36 perf.data
# perf evlist
ibs_op//
dummy:u
# perf evlist -v
ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -s type,typeoff --hierarchy --group --stdio
# Total Lost Samples: 0
#
# Samples: 2K of events 'ibs_op//, dummy:u'
# Event count (approx.): 1904553038
#
# Overhead Data Type / Data Type Offset
# ................... ............................
#
73.70% 0.00% (unknown)
73.70% 0.00% (unknown) +0 (no field)
3.01% 0.00% long unsigned int
3.00% 0.00% long unsigned int +0 (no field)
0.01% 0.00% long unsigned int +2 (no field)
2.73% 0.00% struct task_struct
1.71% 0.00% struct task_struct +52 (on_cpu)
0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting)
0.14% 0.00% struct task_struct +2384 ()
0.06% 0.00% struct task_struct +3096 (signal)
0.05% 0.00% struct task_struct +3616 (cgroups)
0.05% 0.00% struct task_struct +2344 (active_mm)
0.02% 0.00% struct task_struct +46 (flags)
0.02% 0.00% struct task_struct +2096 (migration_disabled)
0.01% 0.00% struct task_struct +24 (__state)
0.01% 0.00% struct task_struct +3956 (mm_cid_active)
0.01% 0.00% struct task_struct +1048 (cpus_ptr)
0.01% 0.00% struct task_struct +184 (se.group_node.next)
0.01% 0.00% struct task_struct +20 (thread_info.cpu)
0.00% 0.00% struct task_struct +104 (on_rq)
0.00% 0.00% struct task_struct +2456 (pid)
1.36% 0.00% struct module
0.59% 0.00% struct module +952 (kallsyms)
0.42% 0.00% struct module +0 (state)
0.23% 0.00% struct module +8 (list.next)
0.12% 0.00% struct module +216 (syms)
0.95% 0.00% struct inode
0.41% 0.00% struct inode +40 (i_sb)
0.22% 0.00% struct inode +0 (i_mode)
0.06% 0.00% struct inode +76 (i_rdev)
0.06% 0.00% struct inode +56 (i_security)
<SNIP>
perf top/report:
- Don't ignore job control, allowing control+Z + bg to work.
- Add s390 raw data interpretation for PAI (Processor Activity
Instrumentation) counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line
(perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the
same, as IBS (Instruction Based Sampling) is used and it is
inherentely precise, not having levels of precision like in Intel
systems.
- When 'cycles' isn't available, fall back to the "task-clock" event
when not system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function
pointers for selecting if addresses are identity or DSO relative,
and using just a byte for some boolean struct members.
- Resolve the arch specific strerrno just once to use in
perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it
starts with a browser showing the number of samples for Efficiency
(cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
behaviour is similar on ARM64, with its respective set of
big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event
in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
code.
- Use the newly introduced maps__for_each_map() to add missing
locking around iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the
first one, ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on
libelf.
- Use alternative to 'find ... -printf' as this isn't supported in
busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is
stripped. These tests check if a symbol is resolved, if some hot
function is indeed detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
skip it if sleeping spinlocks are detected (using BTF) and point to
the mailing list discussion about it. This test is also being
skipped on several architectures (powerpc, s390x, arm and aarch64)
due to other pending issues with intruction breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
addressing issues caused by the fallback from cycles to task-clock
done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make
sure changes don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via
'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton
test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's
Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
- Add T-HEAD C9xx JSON file.
https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md
ARM64:
- Remove UTF-8 characters from cmn.json, that were causing build
failure in some distros.
- Add core PMU events and metrics for Ampere One X.
- Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
libperf:
- Rename several perf_cpu_map constructor names to clarify what they
really do.
- Ditto for some other methods, coping with some issues in their
semantics, like perf_cpu_map__empty() ->
perf_cpu_map__has_any_cpu_or_is_empty().
- Document perf_cpu_map__nr()'s behavior
perf stat:
- Exit if parse groups fails.
- Combine the -A/--no-aggr and --no-merge options.
- Fix help message for --metric-no-threshold option.
Hardware tracing:
ARM64 CoreSight:
- Bump minimum OpenCSD version to ensure a bugfix is present.
- Add 'T' itrace option for timestamp trace
- Set start vm addr of exectable file to 0 and don't ignore first
sample on the arm-cs-trace-disasm.py 'perf script'"
* tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer
perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm
perf db-export: Fix missing reference count get in call_path_from_sample()
perf tests: Add perf script test
libsubcmd: Fix memory leak in uniq()
perf TUI: Don't ignore job control
perf vendor events intel: Update sapphirerapids events to v1.17
perf vendor events intel: Update icelakex events to v1.23
perf vendor events intel: Update emeraldrapids events to v1.02
perf vendor events intel: Alderlake/rocketlake metric fixes
perf x86 test: Add hybrid test for conflicting legacy/sysfs event
perf x86 test: Update hybrid expectations
perf vendor events amd: Add Zen 4 memory controller events
perf stat: Fix hard coded LL miss units
perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event
perf env: Avoid recursively taking env->bpf_progs.lock
perf annotate: Add --insn-stat option for debugging
perf annotate: Add --type-stat option for debugging
perf annotate: Support event group display
perf annotate: Add --data-type option
...
|
|
The KVM RISC-V allows Zfa extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zvfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zihintntl extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
