summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
3 daysselftests/bpf: Test bpf_skb_check_mtu(BPF_MTU_CHK_SEGS) when ↵Martin KaFai Lau2-1/+34
transport_header is not set commit 6cc73f35406cae1f053e984e8de40e6dc9681446 upstream. Add a test to check that bpf_skb_check_mtu(BPF_MTU_CHK_SEGS) is rejected (-EINVAL) if skb->transport_header is not set. The test needs to lower the MTU of the loopback device. Thus, take this opportunity to run the test in a netns by adding "ns_" to the test name. The "serial_" prefix can then be removed. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20251112232331.1566074-2-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysselftests: tc_actions: don't dump 2MB of \0 to stdoutJakub Kicinski1-1/+1
[ Upstream commit 32b70e62034aa72f8414ad4e9122cce7ad418c48 ] Since we started running selftests in NIPA we have been seeing tc_actions.sh generate a soft lockup warning on ~20% of the runs. On the pre-netdev foundation setup it was actually a missed irq splat from the console. Now it's either that or a lockup. I initially suspected a socket locking issue since the test is exercising local loopback with act_mirred. After hours of staring at this I noticed in strace that ncat when -o $file is specified _both_ saves the output to the file and still prints it to stdout. Because the file being sent is constructed with: dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred ^^^^^^^^^ the data printed is all \0. Most terminals don't display nul characters (and neither does vng output capture save them). But QEMU's serial console still has to poke them thru which is very slow and causes the lockup (if the file is >600kB). Replace the '-o $file' with '> $file'. This speeds the test up from 2m20s to 18s on debug kernels, and prevents the warnings. Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysbpftool: Fix truncated netlink dumpsJakub Kicinski2-2/+7
[ Upstream commit 3b39d73cc3379360a33eb583b17f21fe55e1288e ] Netlink requires that the recv buffer used during dumps is at least min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will get truncated. Make sure bpftool follows this requirement, avoid missing information on systems with large pages. Acked-by: Quentin Monnet <qmo@kernel.org> Fixes: 7084566a236f ("tools/bpftool: Remove libbpf_internal.h usage in bpftool") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20260217194150.734701-1-kuba@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: forwarding: vxlan_bridge_1d_ipv6: fix test failure with ↵Aleksei Oladko1-1/+1
br_netfilter enabled [ Upstream commit ce9f6aec0fb780dafc1dfc5f47c688422aff464a ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv6 packet has an incorrect payload length set in the IPv6 header. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by setting the correct IPv6 payload length for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh lines 698-706 )"00:03:"$( : Payload length )"3a:"$( : Next header )"04:"$( : Hop limit )"$saddr:"$( : IP saddr )"$daddr:"$( : IP daddr )"80:"$( : ICMPv6.type )"00:"$( : ICMPv6.code )"00:"$( : ICMPv6.checksum ) Data after IPv6 header: • 80: — 1 byte (ICMPv6 type) • 00: — 1 byte (ICMPv6 code) • 00: — 1 byte (ICMPv6 checksum, truncated) Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match the actual payload size. Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter ↵Aleksei Oladko1-10/+16
enabled [ Upstream commit 02cb2e6bacbb08ebf6acb61be816efd11e1f4a21 ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv4 packet contains a zero IP header checksum. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by calculating and setting a valid IPv4 header checksum for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. Fixed by using the payload_template_calc_checksum() / payload_template_expand_checksum() helpers that are only available in v6.3 and newer kernels. Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 dayslibbpf: Fix invalid write loop logic in bpf_linker__add_buf()Amery Hung1-1/+1
[ Upstream commit 04999b99e81eaa7b6223ec1c03af3bcb4ac57aaa ] Fix bpf_linker__add_buf()'s logic of copying data from memory buffer into memfd. In the event of short write not writing entire buf_sz bytes into memfd file, we'll append bytes from the beginning of buf *again* (corrupting ELF file contents) instead of correctly appending the rest of not-yet-read buf contents. Closes: https://github.com/libbpf/libbpf/issues/945 Fixes: 6d5e5e5d7ce1 ("libbpf: Extend linker API to support in-memory ELF files") Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20260209230134.3530521-1-ameryhung@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: netconsole: Increase port listening timeoutPin-yen Lin1-2/+2
[ Upstream commit a68a9bd086c2822d0c629443bd16ad1317afe501 ] wait_for_port() can wait up to 2 seconds with the sleep and the polling in wait_local_port_listen() combined. So, in netcons_basic.sh, the socat process could die before the test writes to the netconsole. Increase the timeout to 3 seconds to make netcons_basic.sh pass consistently. Fixes: 3dc6c76391cb ("selftests: net: Add IPv6 support to netconsole basic tests") Signed-off-by: Pin-yen Lin <treapking@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260210005939.3230550-1-treapking@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: netconsole: remove log noise due to socat exitAndre Carvalho1-1/+1
[ Upstream commit e3b8cbf40c6e60a7a935bd8980884d5741a7a77b ] This removes some noise that can be distracting while looking at selftests by redirecting socat stderr to /dev/null. Before this commit, netcons_basic would output: Running with target mode: basic (ipv6) 2025/11/29 12:08:03 socat[259] W exiting on signal 15 2025/11/29 12:08:03 socat[271] W exiting on signal 15 basic : ipv6 : Test passed Running with target mode: basic (ipv4) 2025/11/29 12:08:05 socat[329] W exiting on signal 15 2025/11/29 12:08:05 socat[322] W exiting on signal 15 basic : ipv4 : Test passed Running with target mode: extended (ipv6) 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[380] W exiting on signal 15 extended : ipv6 : Test passed Running with target mode: extended (ipv4) 2025/11/29 12:08:10 socat[440] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 extended : ipv4 : Test passed After these changes, output looks like: Running with target mode: basic (ipv6) basic : ipv6 : Test passed Running with target mode: basic (ipv4) basic : ipv4 : Test passed Running with target mode: extended (ipv6) extended : ipv6 : Test passed Running with target mode: extended (ipv4) extended : ipv4 : Test passed Signed-off-by: Andre Carvalho <asantostc@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: a68a9bd086c2 ("selftests: netconsole: Increase port listening timeout") Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: net: lib: Fix jq parsing errorYue Haibing1-1/+1
[ Upstream commit 10ec0fc0ccc525abc807b0ca8ad5a26a0bd56361 ] The testcase failed as below: $./vlan_bridge_binding.sh ... + adf_ip_link_set_up d1 + local name=d1 + shift + ip_link_is_up d1 + ip_link_has_flag d1 UP + local name=d1 + shift + local flag=UP + shift ++ ip -j link show d1 ++ jq --arg flag UP 'any(.[].flags.[]; . == $flag)' jq: error: syntax error, unexpected '[', expecting FORMAT or QQSTRING_START (Unix shell quoting issues?) at <top-level>, line 1: any(.[].flags.[]; . == $flag) jq: 1 compile error Remove the extra dot (.) after flags array to fix this. Fixes: 4baa1d3a5080 ("selftests: net: lib: Add ip_link_has_flag()") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260211022146.190948-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests: mlxsw: tc_restrictions: Fix test failure with new iproute2Ido Schimmel1-2/+2
[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONTAristeu Rozanski1-8/+105
[ Upstream commit b24335521de92fd2ee22460072b75367ca8860b0 ] selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT In order to synchronize new processes to test inheritance of memfd_noexec sysctl, memfd_test sets up the sysctl with a value before creating the new process. The new process then sends itself a SIGSTOP in order to wait for the parent to flip the sysctl value and send a SIGCONT signal. This would work as intended if it wasn't the fact that the new process is being created with CLONE_NEWPID, which creates a new PID namespace and the new process has PID 1 in this namespace. There're restrictions on sending signals to PID 1 and, although it's relaxed for other than root PID namespace, it's biting us here. In this specific case the SIGSTOP sent by the new process is ignored (no error to kill() is returned) and it never stops its execution. This is usually not noticiable as the parent usually manages to set the new sysctl value before the child has a chance to run and the test succeeds. But if you run the test in a loop, it eventually reproduces: while [ 1 ]; do ./memfd_test >log 2>&1 || break; done; cat log So this patch replaces the SIGSTOP/SIGCONT synchronization with IPC semaphore. Link: https://lkml.kernel.org/r/a7776389-b3d6-4b18-b438-0b0e3ed1fd3b@work Fixes: 6469b66e3f5a ("selftests: improve vm.memfd_noexec sysctl tests") Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Shuah Khan <shuah@kernel.org> Cc: liuye <liuye@kylinos.cn> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 dayskbuild: Add objtool to top-level clean targetJosh Poimboeuf1-0/+2
[ Upstream commit 68b4fe32d73789dea23e356f468de67c8367ef8f ] Objtool is an integral part of the build, make sure it gets cleaned by "make clean" and "make mrproper". Fixes: 442f04c34a1a ("objtool: Add tool to perform compile-time stack metadata validation") Reported-by: Jens Remus <jremus@linux.ibm.com> Closes: https://lore.kernel.org/15f2af3b-be33-46fc-b972-6b8e7e0aa52e@linux.ibm.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Jens Remus <jremus@linux.ibm.com> Link: https://patch.msgid.link/968faf2ed30fa8b3519f79f01a1ecfe7929553e5.1770759919.git.jpoimboe@kernel.org [nathan: use Closes: instead of Link: per checkpatch.pl] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daystools/power/x86/intel-speed-select: Fix file descriptor leak in isolate_cpus()Malaya Kumar Rout1-0/+2
[ Upstream commit 56c17ee151c6e1a73d77e15b82a8e2130cd8dd16 ] The file descriptor opened in isolate_cpus() when (!level) is true was not being closed before returning, causing a file descriptor leak in both the error path and the success path. When write() fails at line 950, the function returns at line 953 without closing the file descriptor. Similarly, on success, the function returns at line 956 without closing the file descriptor. Add close(fd) calls before both return statements to fix the resource leak. This follows the same pattern used elsewhere in the same function where file descriptors are properly closed before returning (see lines 1005 and 1027). Fixes: 997074df658e ("tools/power/x86/intel-speed-select: Use cgroup v2 isolation") Signed-off-by: Malaya Kumar Rout <mrout@redhat.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/mm: fix usage of FORCE_READ() in cow testsKevin Brodsky1-8/+8
[ Upstream commit bce1dabd310e87fefe0645fec9ba98b84d37e418 ] Commit 5bbc2b785e63 ("selftests/mm: fix FORCE_READ to read input value correctly") modified FORCE_READ() to take a value instead of a pointer. It also changed most of the call sites accordingly, but missed many of them in cow.c. In those cases, we ended up with the pointer itself being read, not the memory it points to. No failure occurred as a result, so it looks like the tests work just fine without faulting in. However, the huge_zeropage tests explicitly check that pages are populated, so those became skipped. Convert all the remaining FORCE_READ() to fault in the mapped page, as was originally intended. This allows the huge_zeropage tests to run again (3 tests in total). Link: https://lkml.kernel.org/r/20260122170224.4056513-5-kevin.brodsky@arm.com Fixes: 5bbc2b785e63 ("selftests/mm: fix FORCE_READ to read input value correctly") Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Acked-by: SeongJae Park <sj@kernel.org> Reviewed-by: wang lian <lianux.mm@gmail.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Reviewed-by: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Usama Anjum <Usama.Anjum@arm.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysxdrgen: Remove inclusion of nlm4.h headerChuck Lever1-1/+0
[ Upstream commit eb1f3b55ac6202a013daf14ed508066947cdafa8 ] The client-side source code template mistakenly includes the nlm4.h header file, which is specific to the NLM protocol and should not be present in the generic template that generates client stubs for all XDR-based protocols. Fixes: 903a7d37d9ea ("xdrgen: Update the files included in client-side source code") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysxdrgen: Fix struct prefix for typedef types in program wrappersChuck Lever3-1/+12
[ Upstream commit bf0fe9ad3d597d8e1378dc9953ca96dfc3addb2b ] The program templates for decoder/argument.j2 and encoder/result.j2 unconditionally add 'struct' prefix to all types. This is incorrect when an RPC protocol specification lists a typedef'd basic type or an enum as a procedure argument or result (e.g., NFSv2's fhandle or stat), resulting in compiler errors when building generated C code. Fixes: 4b132aacb076 ("tools: Add xdrgen") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysspi: tools: Add include folder to .gitignoreFrancesco Lavra1-0/+1
[ Upstream commit 5af56f30c4fcbade4a92f94dadfea517d1db9703 ] The Makefile for the SPI tools creates an include/linux/spi folder and some symlinks inside it. After running `make -C spi/tools`, this folder shows up as untracked in the git status. Add the above folder to the .gitignore file. Fixes: f325b73dc4db ("spi: tools: move to tools buildsystem") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Link: https://patch.msgid.link/20260209095001.556495-1-flavra@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/xsk: fix number of Tx frags in invalid packetLarysa Zaremba1-1/+1
[ Upstream commit 88af9fefed412e4bea9a1a771cbe6fe347fa3507 ] The issue occurs in TOO_MANY_FRAGS test case when xdp_zc_max_segs is set to an odd number. TOO_MANY_FRAGS test case contains an invalid packet consisting of (xdp_zc_max_segs) frags. Every frag, even the last one has XDP_PKT_CONTD flag set. This packet is expected to be dropped. After that, there is a valid linear packet, which is expected to be received back. Once (xdp_zc_max_segs) is an odd number, the last packet cannot be received, if packet forwarding between Rx and Tx interfaces relies on the ethernet header, e.g. checks for ETH_P_LOOPBACK. Packet is malformed, if all traffic is looped. Turns out, sending function processes multiple invalid frags as if they were in 2-frag packets. So once the invalid mbuf packet contains an odd number of those, the valid packet after gets paired with the previous invalid descriptor, and hence does not get an ethernet header generated, so it is either dropped or malformed. Make invalid packets in verbatim mode always have only a single frag. For such packets, number of frags is otherwise meaningless, as descriptor flags are pre-configured in verbatim mode and packet data is not generated for invalid descriptors. Fixes: 697604492b64 ("selftests/xsk: add invalid descriptor test for multi-buffer") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20260203155103.2305816-3-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/xsk: properly handle batch ending in the middle of a packetLarysa Zaremba1-0/+2
[ Upstream commit 42e41b2a0afa04ca49ee2725aadf90ccb058ed28 ] Referenced commit reduced the scope of the variable pkt, so now it has to be reinitialized via pkt_stream_get_next_rx_pkt(), which also increments some counters. When the packet is interrupted by the batch ending, pkt stream therefore proceeds to the next packet, while xsk ring still contains the previous one, this results in a pkt_nb mismatch. Decrement the affected counters when packet is interrupted. Fixes: 8913e653e9b8 ("selftests/xsk: Iterate over all the sockets in the receive pkts function") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20260203155103.2305816-2-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/bpf: test_xsk: Split xskxceiverBastien Curutchet (eBPF Foundation)5-2634/+2738
[ Upstream commit 3ab77f35a75eb236956c1e8ba8494ef18a75eae0 ] AF_XDP features are tested by the test_xsk.sh script but not by the test_progs framework. The tests used by the script are defined in xksxceiver.c which can't be integrated in the test_progs framework as is. Extract these test definitions from xskxceiver{.c/.h} to put them in new test_xsk{.c/.h} files. Keep the main() function and its unshared dependencies in xksxceiver to avoid impacting the test_xsk.sh script which is often used to test real hardware. Move ksft_test_result_*() calls to xskxceiver.c to keep the kselftest's report valid Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com> Link: https://lore.kernel.org/r/20251031-xsk-v7-1-39fe486593a3@bootlin.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: 42e41b2a0afa ("selftests/xsk: properly handle batch ending in the middle of a packet") Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/bpf: Fix kprobe multi stacktrace_ips testJiri Olsa1-5/+14
[ Upstream commit 0207f94971e72a13380e28022c86da147e8e090f ] We now include the attached function in the stack trace, fixing the test accordingly. Fixes: c9e208fa93cd ("selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260126211837.472802-4-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/bpf: Fix resource leak in serial_test_wq on attach failureKery Qi1-2/+3
[ Upstream commit a32ae2658471dd87a2f7a438388ed7d9a5767212 ] When wq__attach() fails, serial_test_wq() returns early without calling wq__destroy(), leaking the skeleton resources allocated by wq__open_and_load(). This causes ASAN leak reports in selftests runs. Fix this by jumping to a common clean_up label that calls wq__destroy() on all exit paths after successful open_and_load. Note that the early return after wq__open_and_load() failure is correct and doesn't need fixing, since that function returns NULL on failure (after internally cleaning up any partial allocations). Fixes: 8290dba51910 ("selftests/bpf: wq: add bpf_wq_start() checks") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20260121094114.1801-3-qikeyu2017@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
3 dayslibbpf: Fix OOB read in btf_dump_get_bitfield_valueVarun R Mallya1-0/+9
[ Upstream commit 5714ca8cba5ed736f3733663c446cbee63a10a64 ] When dumping bitfield data, btf_dump_get_bitfield_value() reads data based on the underlying type's size (t->size). However, it does not verify that the provided data buffer (data_sz) is large enough to contain these bytes. If btf_dump__dump_type_data() is called with a buffer smaller than the type's size, this leads to an out-of-bounds read. This was confirmed by AddressSanitizer in the linked issue. Fix this by ensuring we do not read past the provided data_sz limit. Fixes: a1d3cc3c5eca ("libbpf: Avoid use of __int128 in typed dump display") Reported-by: Harrison Green <harrisonmichaelgreen@gmail.com> Suggested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Varun R Mallya <varunrmallya@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260106233527.163487-1-varunrmallya@gmail.com Closes: https://github.com/libbpf/libbpf/issues/928 Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/bpf: veristat: fix printing order in output_stats()Puranjay Mohan1-1/+1
[ Upstream commit c286e7e9d1f1f3d90ad11c37e896f582b02d19c4 ] The order of the variables in the printf() doesn't match the text and therefore veristat prints something like this: Done. Processed 24 files, 0 programs. Skipped 62 files, 0 programs. When it should print: Done. Processed 24 files, 62 programs. Skipped 0 files, 0 programs. Fix the order of variables in the printf() call. Fixes: 518fee8bfaf2 ("selftests/bpf: make veristat skip non-BPF and failing-to-open BPF objects") Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20251231221052.759396-1-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftests/resctrl: Fix a division by zero error on HygonXiaochen Shen1-0/+10
[ Upstream commit 671ef08d9455f5754d1fc96f5a14e357d6b80936 ] Change to adjust effective L3 cache size with SNC enabled change introduced the snc_nodes_per_l3_cache() function to detect the Intel Sub-NUMA Clustering (SNC) feature by comparing #CPUs in node0 with #CPUs sharing LLC with CPU0. The function was designed to return: (1) >1: SNC mode is enabled. (2) 1: SNC mode is not enabled or not supported. However, on certain Hygon CPUs, #CPUs sharing LLC with CPU0 is actually less than #CPUs in node0. This results in snc_nodes_per_l3_cache() returning 0 (calculated as cache_cpus / node_cpus). This leads to a division by zero error in get_cache_size(): *cache_size /= snc_nodes_per_l3_cache(); Causing the resctrl selftest to fail with: "Floating point exception (core dumped)" Fix the issue by ensuring snc_nodes_per_l3_cache() returns 1 when SNC mode is not supported on the platform. Updated commit log to fix commit has issues: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20251217030456.3834956-2-shenxiaochen@open-hieco.net Fixes: a1cd99e700ec ("selftests/resctrl: Adjust effective L3 cache size with SNC enabled") Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-11KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failuresZhiquan Li1-0/+1
commit e396a74222654486d6ab45dca5d0c54c408b8b91 upstream. Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is automatically enabled at -O1 or above. This results in some fortified version of definitions of standard library functions are included. While linker resolves the symbols, the fortified versions might override the definitions in lib/string_override.c and reference to those PLT entries in GLIBC. This is not a problem for the code in host, but it is a disaster for the guest code. E.g., if build and run x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to memset() reference to __memset_chk@plt. The option -fno-builtin-memset is not helpful here, because those fortified versions are not built-in but some definitions which are included by header, they are for different intentions. In order to eliminate the unpredictable behaviors may vary depending on the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to prevent from introducing the fortified definitions. Signed-off-by: Zhiquan Li <zhiquan_li@163.com> Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use") Cc: stable@vger.kernel.org [sean: tag for stable] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06libbpf: Fix -Wdiscarded-qualifiers under C23Mikhail Gavrilov1-3/+4
commit d70f79fef65810faf64dbae1f3a1b5623cdb2345 upstream. glibc ≥ 2.42 (GCC 15) defaults to -std=gnu23, which promotes -Wdiscarded-qualifiers to an error. In C23, strstr() and strchr() return "const char *". Change variable types to const char * where the pointers are never modified (res, sym_sfx, next_path). Suggested-by: Florian Weimer <fweimer@redhat.com> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/r/20251206092825.1471385-1-mikhail.v.gavrilov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> [ shung-hsi.yu: needed to fix kernel build failure due to libbpf since glibc 2.43+ (which adds 'const' qualifier to strstr) ] Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: join: fix local endp not being trackedMatthieu Baerts (NGI0)1-5/+4
commit c5d5ecf21fdd9ce91e6116feb3aa83cee73352cc upstream. When running this mptcp_join.sh selftest on older kernel versions not supporting local endpoints tracking, this test fails because 3 MP_JOIN ACKs have been received, while only 2 were expected. It is not clear why only 2 MP_JOIN ACKs were expected on old kernel versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is expected in the selftests included in this kernel version, see commit f4480eaad489 ("selftests: mptcp: add missing join check"). Switch the expected MP_JOIN ACKs to 3. While at it, move this chk_join_nr helper out of the special condition for older kernel versions as it is now the same as with more recent ones. Also, invert the condition to be more logical: what's expected on newer kernel versions having such helper first. Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: check subflow errors in close eventsMatthieu Baerts (NGI0)1-3/+20
commit 2ef9e3a3845d0a20b62b01f5b731debd0364688d upstream. This validates the previous commit: subflow closed events should contain an error field when a subflow got closed with an error, e.g. reset or timeout. For this test, the chk_evt_nr helper has been extended to check attributes in the matched events. In this test, the 2 subflow closed events should have an error. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: check no dup close events after errorMatthieu Baerts (NGI0)1-0/+51
commit 8467458dfa61b37e259e3485a5d3e415d08193c1 upstream. This validates the previous commit: subflow closed events are re-sent with less info when the initial subflow is disconnected after an error and each time a subflow is closed after that. In this new test, the userspace PM is involved because that's how it was discovered, but it is not specific to it. The initial subflow is terminated with a RESET, and that will cause the subflow disconnect. Then, a new subflow is initiated, but also got rejected, which cause a second subflow closed event, but not a third one. While at it, in case of failure to get the expected amount of events, the events are printed. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30vsock/test: fix seqpacket message bounds testStefano Garzarella1-0/+11
[ Upstream commit 0a98de80136968bab7db37b16282b37f044694d3 ] The test requires the sender (client) to send all messages before waking up the receiver (server). Since virtio-vsock had a bug and did not respect the size of the TX buffer, this test worked, but now that we are going to fix the bug, the test hangs because the sender would fill the TX buffer before waking up the receiver. Set the buffer size in the sender (client) as well, as we already do for the receiver (server). Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests: net: amt: wait longer for connection before sending packetsTaehee Yoo1-2/+5
[ Upstream commit 04708606fd7bdc34b69089a4ff848ff36d7088f9 ] Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel connection between the gateway and the relay, and for the listener socket to be created in the LISTENER namespace. However, tests sometimes fail because packets are sent before the connection is fully established. Increase the waiting time to make the tests more reliable, and use wait_local_port_listen() to explicitly wait for the listener socket. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests/ublk: fix garbage output in foreground modeMing Lei1-1/+2
[ Upstream commit e7e1cc18f120a415646be12470169a978a1adcd9 ] Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output when running kublk in foreground mode. Without this, _evtfd is zero-initialized to 0 (stdin), and ublk_send_dev_event() writes binary data to stdin which appears as garbage on the terminal. Also fix debug message format string. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests/ublk: fix error handling for starting deviceMing Lei1-2/+4
[ Upstream commit 23e62cf75518825aac12e9a22bdc40f062428898 ] Fix error handling in ublk_start_daemon() when start_dev fails: 1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before cleanup. Without this, the device deletion may hang waiting for I/O completion that will never happen. 2. Add fail_start label so that pthread_join() is called on the error path. This ensures proper thread cleanup when startup fails. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests/ublk: fix IO thread idle checkMing Lei1-1/+1
[ Upstream commit 75aad5ffe099a1b1a342257236dc260493917ed2 ] Include cmd_inflight in ublk_thread_is_done() check. Without this, the thread may exit before all FETCH commands are completed, which may cause device deletion to hang. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30vsock/test: Do not filter kallsyms by symbol typeMichal Luczaj1-1/+1
[ Upstream commit 5d54aa40c7b7e9dee5746cca99e9ddbcca13e895 ] Blamed commit implemented logic to discover available vsock transports by grepping /proc/kallsyms for known symbols. It incorrectly filtered entries by type 'd'. For some kernel configs having CONFIG_VIRTIO_VSOCKETS=m CONFIG_VSOCKETS_LOOPBACK=y kallsyms reports 0000000000000000 d virtio_transport [vmw_vsock_virtio_transport] 0000000000000000 t loopback_transport Overzealous filtering might have affected vsock test suit, resulting in insufficient/misleading testing. Do not filter symbols by type. It never helped much. Fixes: 3070c05b7afd ("vsock/test: Introduce get_transports()") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260116-vsock_test-kallsyms-grep-v1-1-3320bc3346f2@rbox.co Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30tools: ynl: Specify --no-line-number in ynl-regen.sh.Kuniyuki Iwashima1-1/+1
[ Upstream commit 68578370f9b3a2aba5964b273312d51c581b6aad ] If grep.lineNumber is enabled in .gitconfig, [grep] lineNumber = true ynl-regen.sh fails with the following error: $ ./tools/net/ynl/ynl-regen.sh -f ... ynl_gen_c.py: error: argument --mode: invalid choice: '4:' (choose from user, kernel, uapi) GEN 4: net/ipv4/fou_nl.c Let's specify --no-line-number explicitly. Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260115172533.693652-3-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests: net: fib-onlink-tests: Convert to use namespaces by defaultRicardo B. Marlière1-41/+30
[ Upstream commit 4f5f148dd7c0459229d2ab9a769b2e820f9ee6a2 ] Currently, the test breaks if the SUT already has a default route configured for IPv6. Fix by avoiding the use of the default namespace. Fixes: 4ed591c8ab44 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route") Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30perf parse-events: Fix evsel allocation failureFaisal Bukhari1-2/+5
[ Upstream commit 1eb217ab2e737609f8a861b517649e82e7236d05 ] If evsel__new_idx() returns NULL, the function currently jumps to label 'out_err'. Here, references to `cpus` and `pmu_cpus` are dropped. Also, resources held by evsel->name and evsel->metric_id are freed. But if evsel__new_idx() returns NULL, it can lead to NULL pointer dereference. Fixes: cd63c22168257a0b ("perf parse-events: Minor __add_event refactoring") Signed-off-by: Faisal Bukhari <faisalbukhari523@gmail.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23tools/testing/selftests: fix gup_longterm for unknown fsLorenzo Stoakes1-1/+1
commit 21c68ad1d9771d331198cc73cbf6e908d7915f35 upstream. Commit 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm") introduced a small bug causing unknown filesystems to always result in a test failure. This is because do_test() was updated to use a common reporting path, but this case appears to have been missed. This is problematic for e.g. virtme-ng which uses an overlayfs file system, causing gup_longterm to appear to fail each time due to a test count mismatch: # Planned tests != run tests (50 != 46) # Totals: pass:24 fail:0 xfail:0 xpass:0 skip:22 error:0 The fix is to simply change the return into a break. Link: https://lkml.kernel.org/r/20260106154547.214907-1-lorenzo.stoakes@oracle.com Fixes: 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23tools/testing/selftests: add forked (un)/faulted VMA merge testsLorenzo Stoakes1-41/+139
commit fb39444732f02c32a8312c168d97e33d872c14d3 upstream. Now we correctly handle forked faulted/unfaulted merge on mremap(), exhaustively assert that we handle this correctly. Do this in the less duplicative way by adding a new merge_with_fork fixture and forked/unforked variants, and abstract the forking logic as necessary to avoid code duplication with this also. Link: https://lkml.kernel.org/r/1daf76d89fdb9d96f38a6a0152d8f3c2e9e30ac7.1767638272.git.lorenzo.stoakes@oracle.com Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23tools/testing/selftests: add tests for !tgt, src mremap() mergesLorenzo Stoakes1-0/+232
commit 0ace8f2db6b3b4b0677e559d1a7ab7fd625d61ec upstream. Test that mremap()'ing a VMA into a position such that the target VMA on merge is unfaulted and the source faulted is correctly performed. We cover 4 cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev target = prev, expand prev to cover. 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next target = next, expand next to cover. 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next target = prev, expand prev to cover. 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next target = prev, expand prev to cover. Essentially equivalent to 3, but with additional requirement that next's anon_vma is the same as the copied VMA's. Each of these are performed with MREMAP_DONTUNMAP set, which will cause a KASAN assert for UAF or an assert on zero refcount anon_vma if a bug exists with correctly propagating anon_vma state in each scenario. Link: https://lkml.kernel.org/r/f903af2930c7c2c6e0948c886b58d0f42d8e8ba3.1767638272.git.lorenzo.stoakes@oracle.com Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23selftests: kvm: try getting XFD and XSAVE state out of syncPaolo Bonzini1-8/+30
commit 0383a8edef396cf0a6884b0be81d62bde60737b0 upstream. The host is allowed to set FPU state that includes a disabled xstate component. Check that this does not cause bad effects. Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23selftests: kvm: replace numbered sync points with actionsPaolo Bonzini1-45/+43
commit a1025dcd377ef92d9a09af03b70ce80be281ee22 upstream. Rework the guest=>host syncs in the AMX test to use named actions instead of arbitrary, incrementing numbers. The "stage" of the test has no real meaning, what matters is what action the test wants the host to perform. The incrementing numbers are somewhat helpful for triaging failures, but fully debugging failures almost always requires a much deeper dive into the test (and KVM). Using named actions not only makes it easier to extend the test without having to shift all sync point numbers, it makes the code easier to read. [Commit message by Sean Christopherson] Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23selftests/bpf: Fix selftest verif_scale_strobemeta failure with llvm22Yonghong Song1-3/+3
commit 4f8543b5f20f851cedbb23f8eade159871d84e2a upstream. With latest llvm22, I hit the verif_scale_strobemeta selftest failure below: $ ./test_progs -n 618 libbpf: prog 'on_event': BPF program load failed: -E2BIG libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG -- BPF program is too large. Processed 1000001 insn verification time 7019091 usec stack depth 488 processed 1000001 insns (limit 1000000) max_states_per_insn 28 total_states 33927 peak_states 12813 mark_read 0 -- END PROG LOAD LOG -- libbpf: prog 'on_event': failed to load: -E2BIG libbpf: failed to load object 'strobemeta.bpf.o' scale_test:FAIL:expect_success unexpected error: -7 (errno 7) #618 verif_scale_strobemeta:FAIL But if I increase the verificaiton insn limit from 1M to 10M, the above test_progs run actually will succeed. The below is the result from veristat: $ ./veristat strobemeta.bpf.o Processing 'strobemeta.bpf.o'... File Program Verdict Duration (us) Insns States Program size Jited size ---------------- -------- ------- ------------- ------- ------ ------------ ---------- strobemeta.bpf.o on_event success 90250893 9777685 358230 15954 80794 ---------------- -------- ------- ------------- ------- ------ ------------ ---------- Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs. Further debugging shows the llvm commit [1] is responsible for the verificaiton failure as it tries to convert certain switch statement to if-condition. Such change may cause different transformation compared to original switch statement. In bpf program strobemeta.c case, the initial llvm ir for read_int_var() function is define internal void @read_int_var(ptr noundef %0, i64 noundef %1, ptr noundef %2, ptr noundef %3, ptr noundef %4) #2 !dbg !535 { %6 = alloca ptr, align 8 %7 = alloca i64, align 8 %8 = alloca ptr, align 8 %9 = alloca ptr, align 8 %10 = alloca ptr, align 8 %11 = alloca ptr, align 8 %12 = alloca i32, align 4 ... %20 = icmp ne ptr %19, null, !dbg !561 br i1 %20, label %22, label %21, !dbg !562 21: ; preds = %5 store i32 1, ptr %12, align 4 br label %48, !dbg !563 22: %23 = load ptr, ptr %9, align 8, !dbg !564 ... 47: ; preds = %38, %22 store i32 0, ptr %12, align 4, !dbg !588 br label %48, !dbg !588 48: ; preds = %47, %21 call void @llvm.lifetime.end.p0(ptr %11) #4, !dbg !588 %49 = load i32, ptr %12, align 4 switch i32 %49, label %51 [ i32 0, label %50 i32 1, label %50 ] 50: ; preds = %48, %48 ret void, !dbg !589 51: ; preds = %48 unreachable } Note that the above 'switch' statement is added by clang frontend. Without [1], the switch statement will survive until SelectionDag, so the switch statement acts like a 'barrier' and prevents some transformation involved with both 'before' and 'after' the switch statement. But with [1], the switch statement will be removed during middle end optimization and later middle end passes (esp. after inlining) have more freedom to reorder the code. The following is the related source code: static void *calc_location(struct strobe_value_loc *loc, void *tls_base): bpf_probe_read_user(&tls_ptr, sizeof(void *), dtv); /* if pointer has (void *)-1 value, then TLS wasn't initialized yet */ return tls_ptr && tls_ptr != (void *)-1 ? tls_ptr + tls_index.offset : NULL; In read_int_var() func, we have: void *location = calc_location(&cfg->int_locs[idx], tls_base); if (!location) return; bpf_probe_read_user(value, sizeof(struct strobe_value_generic), location); ... The static func calc_location() is called inside read_int_var(). The asm code without [1]: 77: .123....89 (85) call bpf_probe_read_user#112 78: ........89 (79) r1 = *(u64 *)(r10 -368) 79: .1......89 (79) r2 = *(u64 *)(r10 -8) 80: .12.....89 (bf) r3 = r2 81: .123....89 (0f) r3 += r1 82: ..23....89 (07) r2 += 1 83: ..23....89 (79) r4 = *(u64 *)(r10 -464) 84: ..234...89 (a5) if r2 < 0x2 goto pc+13 85: ...34...89 (15) if r3 == 0x0 goto pc+12 86: ...3....89 (bf) r1 = r10 87: .1.3....89 (07) r1 += -400 88: .1.3....89 (b4) w2 = 16 In this case, 'r2 < 0x2' and 'r3 == 0x0' go to null 'locaiton' place, so the verifier actually prefers to do verification first at 'r1 = r10' etc. The asm code with [1]: 119: .123....89 (85) call bpf_probe_read_user#112 120: ........89 (79) r1 = *(u64 *)(r10 -368) 121: .1......89 (79) r2 = *(u64 *)(r10 -8) 122: .12.....89 (bf) r3 = r2 123: .123....89 (0f) r3 += r1 124: ..23....89 (07) r2 += -1 125: ..23....89 (a5) if r2 < 0xfffffffe goto pc+6 126: ........89 (05) goto pc+17 ... 144: ........89 (b4) w1 = 0 145: .1......89 (6b) *(u16 *)(r8 +80) = r1 In this case, if 'r2 < 0xfffffffe' is true, the control will go to non-null 'location' branch, so 'goto pc+17' will actually go to null 'location' branch. This seems causing tremendous amount of verificaiton state. To fix the issue, rewrite the following code return tls_ptr && tls_ptr != (void *)-1 ? tls_ptr + tls_index.offset : NULL; to if/then statement and hopefully these explicit if/then statements are sticky during middle-end optimizations. Test with llvm20 and llvm21 as well and all strobemeta related selftests are passed. [1] https://github.com/llvm/llvm-project/pull/161000 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20251014051639.1996331-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23selftests/landlock: Properly close a file descriptorGünther Noack1-1/+2
[ Upstream commit 15e8d739fda1084d81f7d3813e9600eba6e0f134 ] Add a missing close(srv_fd) call, and use EXPECT_EQ() to check the result. Signed-off-by: Günther Noack <gnoack3000@gmail.com> Fixes: f83d51a5bdfe ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets") Link: https://lore.kernel.org/r/20260101134102.25938-2-gnoack3000@gmail.com [mic: Use EXPECT_EQ() and update commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests/landlock: Remove invalid unix socket bind()Matthieu Buffet1-3/+0
[ Upstream commit e1a57c33590a50a6639798e60a597af4a23b0340 ] Remove bind() call on a client socket that doesn't make sense. Since strlen(cli_un.sun_path) returns a random value depending on stack garbage, that many uninitialized bytes are read from the stack as an unix socket address. This creates random test failures due to the bind address being invalid or already in use if the same stack value comes up twice. Fixes: f83d51a5bdfe ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets") Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Reviewed-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20251201003631.190817-1-matthieu@buffet.re Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests/landlock: Fix TCP bind(AF_UNSPEC) test caseMatthieu Buffet2-1/+16
[ Upstream commit bd09d9a05cf04028f639e209b416bacaeffd4909 ] The nominal error code for bind(AF_UNSPEC) on an IPv6 socket is -EAFNOSUPPORT, not -EINVAL. -EINVAL is only returned when the supplied address struct is too short, which happens to be the case in current selftests because they treat AF_UNSPEC like IPv4 sockets do: as an alias for AF_INET (which is a 16-byte struct instead of the 24 bytes required by IPv6 sockets). Make the union large enough for any address (by adding struct sockaddr_storage to the union), and make AF_UNSPEC addresses large enough for any family. Test for -EAFNOSUPPORT instead, and add a dedicated test case for truncated inputs with -EINVAL. Fixes: a549d055a22e ("selftests/landlock: Add network tests") Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Link: https://lore.kernel.org/r/20251027190726.626244-2-matthieu@buffet.re Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests: drv-net: fix RPS mask handling for high CPU numbersGal Pressman1-2/+2
[ Upstream commit cf055f8c000445aa688c53a706ef4f580818eedb ] The RPS bitmask bounds check uses ~(RPS_MAX_CPUS - 1) which equals ~15 = 0xfff0, only allowing CPUs 0-3. Change the mask to ~((1UL << RPS_MAX_CPUS) - 1) = ~0xffff to allow CPUs 0-15. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260112173715.384843-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23vsock/test: add a final full barrier after run all testsStefano Garzarella1-0/+12
[ Upstream commit c39a6a277e0e67ffff6a8efcbbf7e7e23ce9e38c ] If the last test fails, the other side still completes correctly, which could lead to false positives. Let's add a final barrier that ensures that the last test has finished correctly on both sides, but also that the two sides agree on the number of tests to be performed. Fixes: 2f65b44e199c ("VSOCK: add full barrier between test cases") Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-03-02 13:12:10 +0300