summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
3 daysbpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUNAmery Hung1-3/+1
[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ] To test bpf_xdp_pull_data(), an xdp packet containing fragments as well as free linear data area after xdp->data_end needs to be created. However, bpf_prog_test_run_xdp() always fills the linear area with data_in before creating fragments, leaving no space to pull data. This patch will allow users to specify the linear data size through ctx->data_end. Currently, ctx_in->data_end must match data_size_in and will not be the final ctx->data_end seen by xdp programs. This is because ctx->data_end is populated according to the xdp_buff passed to test_run. The linear data area available in an xdp_buff, max_linear_sz, is alawys filled up before copying data_in into fragments. This patch will allow users to specify the size of data that goes into the linear area. When ctx_in->data_end is different from data_size_in, only ctx_in->data_end bytes of data will be put into the linear area when creating the xdp_buff. While ctx_in->data_end will be allowed to be different from data_size_in, it cannot be larger than the data_size_in as there will be no data to copy from user space. If it is larger than the maximum linear data area size, the layout suggested by the user will not be honored. Data beyond max_linear_sz bytes will still be copied into fragments. Finally, since it is possible for a NIC to produce a xdp_buff with empty linear data area, allow it when calling bpf_test_init() from bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such xdp_buff. This is done by moving lower-bound check to callers as most of them already do except bpf_prog_test_run_skb(). The change also fixes a bug that allows passing an xdp_buff with data < ETH_HLEN. This can happen when ctx is used and metadata is at least ETH_HLEN. Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysbpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4KYonghong Song2-8/+96
[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ] The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on arm64 with 64KB page: xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on when constructing frags, with 64K page size, the frag data_len could be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail(). To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel can test different page size properly. With the kernel change, the user space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default value is 17, so for 4K page, the maximum packet size will be less than 68K. To test 64K page, a bigger maximum packet size than 68K is desired. So two different functions are implemented for subtest xdp_adjust_frags_tail_grow. Depending on different page size, different data input/output sizes are used to adapt with different page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daystools/mm/page_owner_sort: fix timestamp comparison for stable sortingKaushlendra Kumar1-1/+5
commit 7013803444dd3bbbe28fd3360c084cec3057c554 upstream. The ternary operator in compare_ts() returns 1 when timestamps are equal, causing unstable sorting behavior. Replace with explicit three-way comparison that returns 0 for equal timestamps, ensuring stable qsort ordering and consistent output. Link: https://lkml.kernel.org/r/20251209044552.3396468-1-kaushlendra.kumar@intel.com Fixes: 8f9c447e2e2b ("tools/vm/page_owner_sort.c: support sorting pid and time") Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysidr: fix idr_alloc() returning an ID out of rangeMatthew Wilcox (Oracle)1-0/+21
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream. If you use an IDR with a non-zero base, and specify a range that lies entirely below the base, 'max - base' becomes very large and idr_get_free() can return an ID that lies outside of the requested range. Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Jan Sokolowski <jan.sokolowski@intel.com> Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysselftests/ftrace: traceonoff_triggers: strip off namesYipeng Zou1-2/+3
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ] The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysselftests: net: fix "buffer overflow detected" for tap.cAlice C. Munduruca1-11/+5
[ Upstream commit 472c5dd6b95c02b3e5d7395acf542150e91165e7 ] When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3', the strcpy() in rtattr_add_strsz() is replaced with a checked version which causes the test to consistently fail when compiled with toolchains for which this option is enabled by default. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN tap.test_packet_valid_udp_gso ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_gso: Test terminated by assertion # FAIL tap.test_packet_valid_udp_gso not ok 1 tap.test_packet_valid_udp_gso # RUN tap.test_packet_valid_udp_csum ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_csum: Test terminated by assertion # FAIL tap.test_packet_valid_udp_csum not ok 2 tap.test_packet_valid_udp_csum # RUN tap.test_packet_crash_tap_invalid_eth_proto ... *** buffer overflow detected ***: terminated # test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion # FAIL tap.test_packet_crash_tap_invalid_eth_proto not ok 3 tap.test_packet_crash_tap_invalid_eth_proto # FAILED: 0 / 3 tests passed. # Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 A buffer overflow is detected by the fortified glibc __strcpy_chk() since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly reported as 1, even though there is ample space in its bounding buffer `req`. Additionally, given that IFLA_IFNAME also expects a null-terminated string, callers of rtaddr_add_str{,sz}() could simply use the rtaddr_add_strsz() variant. (which has been renamed to remove the trailing `sz`) memset() has been used for this function since it is unchecked and thus circumvents the issue discussed in the previous paragraph. Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver") Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com> Reviewed-by: Cengiz Can <cengiz.can@canonical.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daystools/testing/nvdimm: Use per-DIMM device handleAlison Schofield1-1/+6
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream. KASAN reports a global-out-of-bounds access when running these nfit tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh, daxdev-errors.sh, and inject-error.sh. [] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test] [] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215 [] The buggy address belongs to the variable: [] handle+0x1c/0x1df4 [nfit_test] nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device handle and triggers a KASAN error when it reads past the end of the handle array. It should not be indexing the handle array at all. The correct device handle is stored in per-DIMM test data. Each DIMM has a struct nfit_mem that embeds a struct acpi_nfit_memdev that describes the NFIT device handle. Use that device handle here. Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA") Cc: stable@vger.kernel.org Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>> --- Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysselftests: mptcp: pm: ensure unknown flags are ignoredMatthieu Baerts (NGI0)2-0/+15
commit 29f4801e9c8dfd12bdcb33b61a6ac479c7162bd7 upstream. This validates the previous commit: the userspace can set unknown flags -- the 7th bit is currently unused -- without errors, but only the supported ones are printed in the endpoints dumps. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt1-2/+2
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream. The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 dayslibperf cpumap: Fix perf_cpu_map__max for an empty/NULL mapIan Rogers1-4/+6
[ Upstream commit a0a4173631bfcfd3520192c0a61cf911d6a52c3a ] Passing an empty map to perf_cpu_map__max triggered a SEGV. Explicitly test for the empty map. Reported-by: Ingo Molnar <mingo@kernel.org> Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/ Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysiommufd/selftest: Make it clearer to gcc that the access is not out of boundsJason Gunthorpe1-5/+3
[ Upstream commit 5b244b077c0b0e76573fbb9542cf038e42368901 ] GCC gets a bit confused and reports: In function '_test_cmd_get_hw_info', inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3, inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1: >> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=] 804 | assert(!info->flags); | ~~~~^~~~~~~ iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info': iommufd.c:761:11: note: object 'buffer_smaller' of size 4 761 | } buffer_smaller; | ^~~~~~~~~~~~~~ While it is true that "struct iommu_test_hw_info[0]" is partly out of bounds of the input pointer, it is not true that info->flags is out of bounds. Unclear why it warns on this. Reuse an existing properly sized stack buffer and pass a truncated length instead to test the same thing. Fixes: af4fde93c319 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl") Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysiommufd/selftest: Update hw_info coverage for an input data_typeNicolin Chen3-23/+46
[ Upstream commit 3a35f7d4a4673edf6f02422bb2d78b17c667e167 ] Test both IOMMU_HW_INFO_TYPE_DEFAULT and IOMMU_HW_INFO_TYPE_SELFTEST, and add a negative test for an unsupported type. Also drop the unused mask in test_cmd_get_hw_capabilities() as checkpatch is complaining. Link: https://patch.msgid.link/r/f01a1e50cd7366f217cbf192ad0b2b79e0eb89f0.1752126748.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Pranjal Shrivastava <praan@google.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds") Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysiommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFOYi Liu3-5/+33
[ Upstream commit 6d9500bb1ff8c7f9c3ce199521c41aa41e8fd994 ] IOMMU_HW_INFO is extended to report max_pasid_log2, hence add coverage for it. Link: https://patch.msgid.link/r/20250321180143.8468-6-yi.l.liu@intel.com Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds") Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysselftests: netfilter: packetdrill: avoid failure on HZ=100 kernelFlorian Westphal1-1/+1
[ Upstream commit fec7b0795548b43e2c3c46e3143c34ef6070341c ] packetdrill --ip_version=ipv4 --mtu=1500 --tolerance_usecs=1000000 --non_fatal packet conntrack_syn_challenge_ack.pkt conntrack v1.4.8 (conntrack-tools): 1 flow entries have been shown. conntrack_syn_challenge_ack.pkt:32: error executing `conntrack -f $NFCT_IP_VERSION \ -L -p tcp --dport 8080 | grep UNREPLIED | grep -q SYN_SENT` command: non-zero status 1 Affected kernel had CONFIG_HZ=100; reset packet was still sitting in backlog. Reported-by: Yi Chen <yiche@redhat.com> Fixes: a8a388c2aae4 ("selftests: netfilter: add packetdrill based conntrack tests") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysnetfilter: nf_nat: remove bogus direction checkFlorian Westphal2-4/+11
[ Upstream commit 5ec8ca26fe93103577c904644b0957f069d0051a ] Jakub reports spurious failures of the 'conntrack_reverse_clash.sh' selftest. A bogus test makes nat core resort to port rewrite even though there is no need for this. When the test is made, nf_nat_used_tuple() would already have caused us to return if no other CPU had added a colliding entry. Moreover, nf_nat_used_tuple() would have ignored the colliding entry if their origin tuples had been the same. All that is left to check is if the colliding entry in the hash table is subject to NAT, and, if its not, if our entry matches in the reverse direction, e.g. hash table has addr1:1234 -> addr2:80, and we want to commit addr2:80 -> addr1:1234. Because we already checked that neither the new nor the committed entry is subject to NAT we only have to check origin vs. reply tuple: for non-nat entries, the reply tuple is always the inverted original. Just in case there are more problems extend the error reporting in the selftest while at it and dump conntrack table/stats on error. Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/ Fixes: d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf hist: In init, ensure mem_info is put on error pathsIan Rogers1-4/+2
[ Upstream commit f60efb4454b24cc944ff3eac164bb9dce9169f71 ] Rather than exit the internal map_symbols directly, put the mem-info that does this and also lowers the reference count on the mem-info itself otherwise the mem-info is being leaked. Fixes: 56e144fe98260a0f ("perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit") Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf tools: Fix split kallsyms DSO countingNamhyung Kim1-2/+2
[ Upstream commit ad0b9c4865b98dc37f4d606d26b1c19808796805 ] It's counted twice as it's increased after calling maps__insert(). I guess we want to increase it only after it's added properly. Reviewed-by: Ian Rogers <irogers@google.com> Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf tools: Mark split kallsyms DSOs as loadedNamhyung Kim1-0/+1
[ Upstream commit 7da4d60db33cccd8f4c445ab20bba71531435ee5 ] The maps__split_kallsyms() will split symbols to module DSOs if it comes from a module. It also handled some unusual kernel symbols after modules by creating new kernel maps like "[kernel].0". But they are pseudo DSOs to have those unexpected symbols. They should not be considered as unloaded kernel DSOs. Otherwise the dso__load() for them will end up calling dso__load_kallsyms() and then maps__split_kallsyms() again and again. Reviewed-by: Ian Rogers <irogers@google.com> Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests: bonding: add delay before each xvlan_over_bond connectivity checkHangbin Liu1-0/+1
[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ] Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular kernel, while the tests consistently pass on a debug kernel. This suggests a timing-sensitive issue. To mitigate this, introduce a short sleep before each xvlan_over_bond connectivity check. The delay helps ensure neighbor and route cache have fully converged before verifying connectivity. The sleep interval is kept minimal since check_connection() is invoked nearly 100 times during the test. Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests: bonding: add ipvlan over bond testingEtienne Champetier4-100/+98
[ Upstream commit 08ac69b24507ab06871c18adc421c9d4f1008c61 ] This rework bond_macvlan.sh into bond_macvlan_ipvlan.sh We only test bridge mode for macvlan and l2 mode ]# ./bond_macvlan_ipvlan.sh TEST: active-backup/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: active-backup/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-tlb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-tlb/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-alb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-alb/ipvlan_l2: IPv4: client->server [ OK ] ... Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> Link: https://patch.msgid.link/20250109032819.326528-3-champetier.etienne@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests/bpf: Improve reliability of test_perf_branches_no_hw()Matt Bobrowski2-2/+17
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ] Currently, test_perf_branches_no_hw() relies on the busy loop within test_perf_branches_common() being slow enough to allow at least one perf event sample tick to occur before starting to tear down the backing perf event BPF program. With a relatively small fixed iteration count of 1,000,000, this is not guaranteed on modern fast CPUs, resulting in the test run to subsequently fail with the following: bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:PASS:output not valid 0 nsec check_good_sample:PASS:read_branches_size 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_size 0 nsec test_perf_branches_no_hw:PASS:perf_event_open 0 nsec test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_bad_sample:FAIL:output not valid no valid sample from prog Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1 million increments of a volatile integer can take significantly less than 1 millisecond. If the spin loop and detachment of the perf event BPF program elapses before the first 1 ms sampling interval elapses, the perf event will never end up firing. Fix this by bumping the loop iteration counter a little within test_perf_branches_common(), along with ensuring adding another loop termination condition which is directly influenced by the backing perf event BPF program executing. Notably, a concious decision was made to not adjust the sample_freq value as that is just not a reliable way to go about fixing the problem. It effectively still leaves the race window open. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests/bpf: skip test_perf_branches_hw() on unsupported platformsMatt Bobrowski1-3/+3
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ] Gracefully skip the test_perf_branches_hw subtest on platforms that do not support LBR or require specialized perf event attributes to enable branch sampling. For example, AMD's Milan (Zen 3) supports BRS rather than traditional LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW, attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the generic setup used within this test. Notably, it also probably doesn't hold much value to special case perf event configurations for selected micro architectures. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf arm_spe: Fix memset subclass in operationLeo Yan2-26/+14
[ Upstream commit 33e1fffea492b7158a168914dc0da6aedf78d08e ] The operation subclass is extracted from bits [7..1] of the payload. Since bit [0] is not parsed, there is no chance to match the memset type (0x25). As a result, the memset payload is never parsed successfully. Instead of extracting a unified bit field, change to extract the specific bits for each operation subclass. Fixes: 34fb60400e32 ("perf arm-spe: Add raw decoding for SPEv1.3 MTE and MOPS load/store") Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf arm-spe: Extend branch operationsLeo Yan2-6/+17
[ Upstream commit 64d86c03e1441742216b6332bdfabfb6ede31662 ] In Arm ARM (ARM DDI 0487, L.a), the section "D18.2.7 Operation Type packet", the branch subclass is extended for Call Return (CR), Guarded control stack data access (GCS). This commit adds support CR and GCS operations. The IND (indirect) operation is defined only in bit [1], its macro is updated accordingly. Move the COND (Conditional) macro into the same group with other operations for better maintenance. Reviewed-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Link: https://lore.kernel.org/r/20250304111240.3378214-8-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Stable-dep-of: 33e1fffea492 ("perf arm_spe: Fix memset subclass in operation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests/bpf: Fix failure paths in send_signal testAlexei Starovoitov1-0/+5
[ Upstream commit c13339039891dbdfa6c1972f0483bd07f610b776 ] When test_send_signal_kern__open_and_load() fails parent closes the pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child continues and enters infinite loop, while parent is stuck in wait(NULL). Other error paths have similar issue, so kill the child before waiting on it. The bug was discovered while compiling all of selftests with -O1 instead of -O2 which caused progs/test_send_signal_kern.c to fail to load. Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18libbpf: Fix parsing of multi-split BTFAlan Maguire1-2/+2
[ Upstream commit 4f596acc260e691a2e348f64230392f3472feea3 ] When creating multi-split BTF we correctly set the start string offset to be the size of the base string section plus the base BTF start string offset; the latter is needed for multi-split BTF since the offset is non-zero there. Unfortunately the BTF parsing case needed that logic and it was missed. Fixes: 4e29128a9ace ("libbpf/btf: Fix string handling to support multi-split BTF") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf record: skip synthesize event when open evsel failedShuai Xue1-1/+1
[ Upstream commit 163e5f2b96632b7fb2eaa965562aca0dbdf9f996 ] When using perf record with the `--overwrite` option, a segmentation fault occurs if an event fails to open. For example: perf record -e cycles-ct -F 1000 -a --overwrite Error: cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' perf: Segmentation fault #0 0x6466b6 in dump_stack debug.c:366 #1 0x646729 in sighandler_dump_stack debug.c:378 #2 0x453fd1 in sigsegv_handler builtin-record.c:722 #3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090] #4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862 #5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943 #6 0x458090 in record__synthesize builtin-record.c:2075 #7 0x45a85a in __cmd_record builtin-record.c:2888 #8 0x45deb6 in cmd_record builtin-record.c:4374 #9 0x4e5e33 in run_builtin perf.c:349 #10 0x4e60bf in handle_internal_command perf.c:401 #11 0x4e6215 in run_argv perf.c:448 #12 0x4e653a in main perf.c:555 #13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72] #14 0x43a3ee in _start ??:0 The --overwrite option implies --tail-synthesize, which collects non-sample events reflecting the system status when recording finishes. However, when evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist is not initialized and remains NULL. The code unconditionally calls record__synthesize() in the error path, which iterates through the NULL evlist pointer and causes a segfault. To fix it, move the record__synthesize() call inside the error check block, so it's only called when there was no error during recording, ensuring that evlist is properly initialized. Fixes: 4ea648aec019 ("perf record: Add --tail-synthesize option") Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf lock contention: Load kernel map before lookupNamhyung Kim1-3/+3
[ Upstream commit 553d18c98a896094b99a01765b9698b204183d49 ] On some machines, it caused troubles when it tried to find kernel symbols. I think it's because kernel modules and kallsyms are messed up during load and split. Basically we want to make sure the kernel map is loaded and the code has it in the lock_contention_read(). But recently we added more lookups in the lock_contention_prepare() which is called before _read(). Also the kernel map (kallsyms) may not be the first one in the group like on ARM. Let's use machine__kernel_map() rather than just loading the first map. Reviewed-by: Ian Rogers <irogers@google.com> Fixes: 688d2e8de231c54e ("perf lock contention: Add -l/--lock-addr option") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18tools/nolibc/stdio: let perror work when NOLIBC_IGNORE_ERRNO is setBenjamin Berg1-0/+4
[ Upstream commit c485ca3aff2442adea4c08ceb5183e671ebed22a ] There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such, simply print the message with "unknown error" rather than the integer value of errno. Fixes: acab7bcdb1bc ("tools/nolibc/stdio: add perror() to report the errno value") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf annotate: Check return value of evsel__get_arch() properlyTianyou Li1-1/+1
[ Upstream commit f1204e5846d22fb2fffbd1164eeb19535f306797 ] Check the error code of evsel__get_arch() in the symbol__annotate(). Previously it checked non-zero value but after the refactoring it does only for negative values. Fixes: 0669729eb0afb0cf ("perf annotate: Factor out evsel__get_arch()") Suggested-by: James Clark <james.clark@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tianyou Li <tianyou.li@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18objtool: Fix weak symbol detectionJosh Poimboeuf1-4/+4
[ Upstream commit 72567c630d32bc31f671977f78228c80937ed80e ] find_symbol_hole_containing() fails to find a symbol hole (aka stripped weak symbol) if its section has no symbols before the hole. This breaks weak symbol detection if -ffunction-sections is enabled. Fix that by allowing the interval tree to contain section symbols, which are always at offset zero for a given section. Fixes a bunch of (-ffunction-sections) warnings like: vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction Fixes: 4adb23686795 ("objtool: Ignore extra-symbol code") Acked-by: Petr Mladek <pmladek@suse.com> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18objtool: Fix standalone --hacks=jump_labelDylan Hatch1-1/+2
[ Upstream commit be8374a5ba7cbab6b97df94b4ffe0b92f5c8a6d2 ] The objtool command line 'objtool --hacks=jump_label foo.o' on its own should be expected to rewrite jump labels to NOPs. This means the add_special_section_alts() code path needs to run when only this option is provided. This is mainly relevant in certain debugging situations, but could potentially also fix kernel builds in which objtool is run with --hacks=jump_label but without --orc, --stackval, --uaccess, or --hacks=noinstr. Fixes: de6fbcedf5ab ("objtool: Read special sections with alts only when specific options are selected") Signed-off-by: Dylan Hatch <dylanbhatch@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01tracing/tools: Fix incorrcet short option in usage text for --threadsZhang Chujun1-1/+1
[ Upstream commit 53afec2c8fb2a562222948cb1c2aac48598578c9 ] The help message incorrectly listed '-t' as the short option for --threads, but the actual getopt_long configuration uses '-e'. This mismatch can confuse users and lead to incorrect command-line usage. This patch updates the usage string to correctly show: "-e, --threads NRTHR" to match the implementation. Note: checkpatch.pl reports a false-positive spelling warning on 'Run', which is intentional. Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01selftests: net: use BASH for bareudp testingPo-Hsu Lin1-1/+1
[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ] In bareudp.sh, this script uses /bin/sh and it will load another lib.sh BASH script at the very beginning. But on some operating systems like Ubuntu, /bin/sh is actually pointed to DASH, thus it will try to run BASH commands with DASH and consequently leads to syntax issues: # ./bareudp.sh: 4: ./lib.sh: Bad substitution # ./bareudp.sh: 5: ./lib.sh: source: not found # ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected Fix this by explicitly using BASH for bareudp.sh. This fixes test execution failures on systems where /bin/sh is not BASH. Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com> Link: https://bugs.launchpad.net/bugs/2129812 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01selftests: net: lib: Do not overwrite error messagesIdo Schimmel2-1/+8
[ Upstream commit bed22c7b90af732978715a1789bca1c3cfa245a6 ] ret_set_ksft_status() calls ksft_status_merge() with the current return status and the last one. It treats a non-zero return code from ksft_status_merge() as an indication that the return status was overwritten by the last one and therefore overwrites the return message with the last one. Currently, ksft_status_merge() returns a non-zero return code even if the current return status and the last one are equal. This results in return messages being overwritten which is counter-productive since we are more interested in the first failure message and not the last one. Fix by changing ksft_status_merge() to only return a non-zero return code if the current return status was actually changed. Add a test case which checks that the first error message is not overwritten. Before: # ./lib_sh_test.sh [...] TEST: RET tfail2 tfail -> fail [FAIL] retmsg=tfail expected tfail2 [...] # echo $? 1 After: # ./lib_sh_test.sh [...] TEST: RET tfail2 tfail -> fail [ OK ] [...] # echo $? 0 Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01tools: riscv: Fixed misalignment of CSR related definitionsChen Pei1-2/+3
[ Upstream commit e2cb69263e797c0aa6676bcef23e9e27e44c83b0 ] The file tools/arch/riscv/include/asm/csr.h borrows from arch/riscv/include/asm/csr.h, and subsequent modifications related to CSR should maintain consistency. Signed-off-by: Chen Pei <cp0613@linux.alibaba.com> Link: https://patch.msgid.link/20251114071215.816-1-cp0613@linux.alibaba.com [pjw@kernel.org: dropped Fixes: lines for patches that weren't broken; removed superfluous blank line] Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01selftests: mptcp: join: userspace: longer timeoutMatthieu Baerts (NGI0)1-5/+5
commit 0e4ec14dc1ee4b1ec347729c225c3ca950f2bcf6 upstream. In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to have a longer timeout, and even go over the default one. This connection will be killed at the end, after the verifications: increasing the timeout doesn't change anything, apart from avoiding it to end before the end of the verifications. To play it safe, all userspace tests not waiting for the end of the transfer are now having a longer timeout: 2 minutes. The Fixes commit was making the connection longer, but still, the default timeout would have stopped it after 1 minute, which might not be enough in very slow environments. Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Geliang Tang <geliang@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-01selftests: mptcp: join: endpoints: longer timeoutMatthieu Baerts (NGI0)1-4/+4
commit fb13c6bb810ca871964e062cf91882d1c83db509 upstream. In rare cases, when the test environment is very slow, some endpoints tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to have a longer timeout, and even go over the default one. This connection will be killed at the end, after the verifications: increasing the timeout doesn't change anything, apart from avoiding it to end before the end of the verifications. To play it safe, all endpoints tests not waiting for the end of the transfer are now having a longer timeout: 2 minutes. The Fixes commit was making the connection longer, but still, the default timeout would have stopped it after 1 minute, which might not be enough in very slow environments. Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Geliang Tang <geliang@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: join: properly kill background tasksMatthieu Baerts (NGI0)2-9/+30
commit 852b644acbce1529307a4bb283752c4e77b5cda7 upstream. The 'run_tests' function is executed in the background, but killing its associated PID would not kill the children tasks running in the background. To properly kill all background tasks, 'kill -- -PID' could be used, but this requires kill from procps-ng. Instead, all children tasks are listed using 'ps', and 'kill' is called with all PIDs of this group. Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)") Cc: stable@vger.kernel.org Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: join: userspace: longer transferMatthieu Baerts (NGI0)1-5/+5
commit 290493078b96ce2ce3e60f55c23654acb678042a upstream. In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all userspace tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: connect: trunc: read all recv dataMatthieu Baerts (NGI0)1-5/+13
commit ee79980f7a428ec299f6261bea4c1084dcbc9631 upstream. MPTCP Join "fastclose server" selftest is sometimes failing because the client output file doesn't have the expected size, e.g. 296B instead of 1024B. When looking at a packet trace when this happens, the server sent the expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE. It is then strange to see the client only receiving 296B, which would mean it only got a part of the second packet. The problem is then not on the networking side, but rather on the data reception side. When mptcp_connect is launched with '-f -1', it means the connection might stop before having sent everything, because a reset has been received. When this happens, the program was directly stopped. But it is also possible there are still some data to read, simply because the previous 'read' step was done with a buffer smaller than the pending data, see do_rnd_read(). In this case, it is important to read what's left in the kernel buffers before stopping without error like before. SIGPIPE is now ignored, not to quit the app before having read everything. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: join: endpoints: longer transferMatthieu Baerts (NGI0)1-4/+4
commit 6457595db9870298ee30b6d75287b8548e33fe19 upstream. In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all endpoints tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: join: rm: set backup flagMatthieu Baerts (NGI0)1-27/+27
commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 upstream. Some of these 'remove' tests rarely fail because a subflow has been reset instead of cleanly removed. This can happen when one extra subflow which has never carried data is being closed (FIN) on one side, while the other is sending data for the first time. To avoid such subflows to be used right at the end, the backup flag has been added. With that, data will be only carried on the initial subflow. Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: mptcp: connect: fix fallback note due to OoOMatthieu Baerts (NGI0)1-1/+1
commit 63c643aa7b7287fdbb0167063785f89ece3f000f upstream. The "fallback due to TCP OoO" was never printed because the stat_ooo_now variable was checked twice: once in the parent if-statement, and one in the child one. The second condition was then always true then, and the 'else' branch was never taken. The idea is that when there are more ACK + MP_CAPABLE than expected, the test either fails if there was no out of order packets, or a notice is printed. Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests/user_events: fix type cast for write_index packed member in perf_testAnkit Khushwaha1-1/+1
commit 216158f063fe24fb003bd7da0cd92cd6e2c4d48b upstream. Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member warning due to potential unaligned pointer access: perf_test.c:239:38: warning: taking address of packed member 'write_index' of class or structure 'user_reg' may result in an unaligned pointer value [-Waddress-of-packed-member] 239 | ASSERT_NE(-1, write(self->data_fd, &reg.write_index, | ^~~~~~~~~~~~~~~ Since write(2) works with any alignment. Casting '&reg.write_index' explicitly to 'void *' to suppress this warning. Link: https://lkml.kernel.org/r/20251106095532.15185-1-ankitkhushwaha.linux@gmail.com Fixes: 42187bdc3ca4 ("selftests/user_events: Add perf self-test for empty arguments events") Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: sunliming <sunliming@kylinos.cn> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests/tracing: Run sample events to clear page cache eventsSteven Rostedt1-0/+4
commit dd4adb986a86727ed8f56c48b6d0695f1e211e65 upstream. The tracing selftest "event-filter-function.tc" was failing because it first runs the "sample_events" function that triggers the kmem_cache_free event and it looks at what function was used during a call to "ls". But the first time it calls this, it could trigger events that are used to pull pages into the page cache. The rest of the test uses the function it finds during that call to see if it will be called in subsequent "sample_events" calls. But if there's no need to pull pages into the page cache, it will not trigger that function and the test will fail. Call the "sample_events" twice to trigger all the page cache work before it calls it to find a function to use in subsequent checks. Cc: stable@vger.kernel.org Fixes: eb50d0f250e96 ("selftests/ftrace: Choose target function for filter test from samples") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24selftests: net: local_termination: Wait for interfaces to come upAlexander Sverdlin1-0/+2
[ Upstream commit 57531b3416448d1ced36a2a974a4085ec43d57b0 ] It seems that most of the tests prepare the interfaces once before the test run (setup_prepare()), rely on setup_wait() to wait for link and only then run the test(s). local_termination brings the physical interfaces down and up during test run but never wait for them to come up. If the auto-negotiation takes some seconds, first test packets are being lost, which leads to false-negative test results. Use setup_wait() in run_test() to make sure auto-negotiation has been completed after all simple_if_init() calls on physical interfaces and test packets will not be lost because of the race against link establishment. Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24iommufd: Make vfio_compat's unmap succeed if the range is already emptyJason Gunthorpe1-0/+2
[ Upstream commit afb47765f9235181fddc61c8633b5a8cfae29fd2 ] iommufd returns ENOENT when attempting to unmap a range that is already empty, while vfio type1 returns success. Fix vfio_compat to match. Fixes: d624d6652a65 ("iommufd: vfio container FD ioctl compatibility") Link: https://patch.msgid.link/r/0-v1-76be45eff0be+5d-iommufd_unmap_compat_jgg@nvidia.com Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Alex Mastro <amastro@fb.com> Reported-by: Alex Mastro <amastro@fb.com> Closes: https://lore.kernel.org/r/aP0S5ZF9l3sWkJ1G@devgpu012.nha5.facebook.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ↵Wang Liang1-0/+4
ethtool-common.sh [ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13selftests/net: use destination options instead of hop-by-hopAnubhav Singh1-2/+2
[ Upstream commit f8e8486702abb05b8c734093aab1606af0eac068 ] The GRO self-test, gro.c, currently constructs IPv6 packets containing a Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path correctly handles IPv6 extension headers. However, network elements may be configured to drop packets with the Hop-by-Hop Options header (HBH). This causes the self-test to fail in environments where such network elements are present. To improve the robustness and reliability of this test in diverse network environments, switch from using IPPROTO_HOPOPTS to IPPROTO_DSTOPTS (Destination Options). The Destination Options header is less likely to be dropped by intermediate routers and still serves the core purpose of the test: validating GRO's handling of an IPv6 extension header. This change ensures the test can execute successfully without being incorrectly failed by network policies outside the kernel's control. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Anubhav Singh <anubhavsinggh@google.com> Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 02:01:21 +0300