summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds4-11/+63
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-25Merge tag 'libnvdimm-for-4.20' of ↵Linus Torvalds4-25/+12
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Improve the efficiency and performance of reading nvdimm-namespace labels. Reduce the amount of label data read at driver load time by a few orders of magnitude. Reduce heavyweight call-outs to platform-firmware routines. - Handle media errors located in the 'struct page' array stored on a persistent memory namespace. Let the kernel clear these errors rather than an awkward userspace workaround. - Fix Address Range Scrub (ARS) completion tracking. Correct occasions where the kernel indicates completion of ARS before submission. - Fix asynchronous device registration reference counting. - Add support for reporting an nvdimm dirty-shutdown-count via sysfs. - Fix various small libnvdimm core and uapi issues. * tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) acpi, nfit: Further restrict userspace ARS start requests acpi, nfit: Fix Address Range Scrub completion tracking UAPI: ndctl: Remove use of PAGE_SIZE UAPI: ndctl: Fix g++-unsupported initialisation in headers tools/testing/nvdimm: Populate dirty shutdown data acpi, nfit: Collect shutdown status acpi, nfit: Introduce nfit_mem flags libnvdimm, label: Fix sparse warning nvdimm: Use namespace index data to reduce number of label reads needed nvdimm: Split label init out from the logic for getting config data nvdimm: Remove empty if statement nvdimm: Clarify comment in sizeof_namespace_index nvdimm: Sanity check labeloff libnvdimm, dimm: Maximize label transfer size libnvdimm, pmem: Fix badblocks population for 'raw' namespaces libnvdimm, namespace: Drop the repeat assignment for variable dev->parent libnvdimm, region: Fail badblocks listing for inactive regions libnvdimm, pfn: during init, clear errors in the metadata area libnvdimm: Set device node in nd_device_register libnvdimm: Hold reference on parent while scheduling async init ...
2018-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds92-1080/+9120
Pull networking updates from David Miller: 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson. 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel. 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we can get rid of the {g,s}et_settings ethtool callbacks, from Michal Kubecek. 4) Add software timestamping to veth driver, from Michael Walle. 5) More work to make packet classifiers and actions lockless, from Vlad Buslov. 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov. 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks. 8) Support batching of XDP buffers in vhost_net, from Jason Wang. 9) Add flow dissector BPF hook, from Petar Penkov. 10) i40e vf --> generic iavf conversion, from Jesse Brandeburg. 11) Add NLA_REJECT netlink attribute policy type, to signal when users provide attributes in situations which don't make sense. From Johannes Berg. 12) Switch TCP and fair-queue scheduler over to earliest departure time model. From Eric Dumazet. 13) Improve guest receive performance by doing rx busy polling in tx path of vhost networking driver, from Tonghao Zhang. 14) Add per-cgroup local storage to bpf 15) Add reference tracking to BPF, from Joe Stringer. The verifier can now make sure that references taken to objects are properly released by the program. 16) Support in-place encryption in TLS, from Vakul Garg. 17) Add new taprio packet scheduler, from Vinicius Costa Gomes. 18) Lots of selftests additions, too numerous to mention one by one here but all of which are very much appreciated. 19) Support offloading of eBPF programs containing BPF to BPF calls in nfp driver, frm Quentin Monnet. 20) Move dpaa2_ptp driver out of staging, from Yangbo Lu. 21) Lots of u32 classifier cleanups and simplifications, from Al Viro. 22) Add new strict versions of netlink message parsers, and enable them for some situations. From David Ahern. 23) Evict neighbour entries on carrier down, also from David Ahern. 24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann and John Fastabend. 25) Add support for filtering route dumps, from David Ahern. 26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al. 27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido Schimmel. 28) Add queue and stack map types to eBPF, from Mauricio Vasquez B. 29) Add back byte-queue-limit support to r8169, with all the bug fixes in other areas of the driver it works now! From Florian Westphal and Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits) tcp: add tcp_reset_xmit_timer() helper qed: Fix static checker warning Revert "be2net: remove desc field from be_eq_obj" Revert "net: simplify sock_poll_wait" net: socionext: Reset tx queue in ndo_stop net: socionext: Add dummy PHY register read in phy_write() net: socionext: Stop PHY before resetting netsec net: stmmac: Set OWN bit for jumbo frames arm64: dts: stratix10: Support Ethernet Jumbo frame tls: Add maintainers net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes octeontx2-af: Support for setting MAC address octeontx2-af: Support for changing RSS algorithm octeontx2-af: NIX Rx flowkey configuration for RSS octeontx2-af: Install ucast and bcast pkt forwarding rules octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response octeontx2-af: NPC MCAM and LDATA extract minimal configuration octeontx2-af: Enable packet length and csum validation octeontx2-af: Support for VTAG strip and capture ...
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds6-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds102-3497/+5370
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-23Merge branch 'locking-core-for-linus' of ↵Linus Torvalds7-56/+294
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and misc x86 updates from Ingo Molnar: "Lots of changes in this cycle - in part because locking/core attracted a number of related x86 low level work which was easier to handle in a single tree: - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E. McKenney, Andrea Parri) - lockdep scalability improvements and micro-optimizations (Waiman Long) - rwsem improvements (Waiman Long) - spinlock micro-optimization (Matthew Wilcox) - qspinlocks: Provide a liveness guarantee (more fairness) on x86. (Peter Zijlstra) - Add support for relative references in jump tables on arm64, x86 and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens) - Be a lot less permissive on weird (kernel address) uaccess faults on x86: BUG() when uaccess helpers fault on kernel addresses (Jann Horn) - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav Amit) - ... and a handful of other smaller changes as well" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) locking/lockdep: Make global debug_locks* variables read-mostly locking/lockdep: Fix debug_locks off performance problem locking/pvqspinlock: Extend node size when pvqspinlock is configured locking/qspinlock_stat: Count instances of nested lock slowpaths locking/qspinlock, x86: Provide liveness guarantee x86/asm: 'Simplify' GEN_*_RMWcc() macros locking/qspinlock: Rework some comments locking/qspinlock: Re-order code locking/lockdep: Remove duplicated 'lock_class_ops' percpu array x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y futex: Replace spin_is_locked() with lockdep locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs x86/extable: Macrofy inline assembly code to work around GCC inlining bugs x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs x86/refcount: Work around GCC inlining bug x86/objtool: Use asm macros to work around GCC inlining bugs ...
2018-10-23Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds10-13/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest change in this cycle is the conclusion of the big 'simplify RCU to two primary flavors' consolidation work - i.e. there's a single RCU flavor for any kernel variant (PREEMPT and !PREEMPT): - Consolidate the RCU-bh, RCU-preempt, and RCU-sched flavors into a single flavor similar to RCU-sched in !PREEMPT kernels and into a single flavor similar to RCU-preempt (but also waiting on preempt-disabled sequences of code) in PREEMPT kernels. This branch also includes a refactoring of rcu_{nmi,irq}_{enter,exit}() from Byungchul Park. - Now that there is only one RCU flavor in any given running kernel, the many "rsp" pointers are no longer required, and this cleanup series removes them. - This branch carries out additional cleanups made possible by the RCU flavor consolidation, including inlining now-trivial functions, updating comments and definitions, and removing now-unneeded rcutorture scenarios. - Now that there is only one flavor of RCU in any running kernel, there is also only on rcu_data structure per CPU. This means that the rcu_dynticks structure can be merged into the rcu_data structure, a task taken on by this branch. This branch also contains a -rt-related fix from Mike Galbraith. There were also other updates: - Documentation updates, including some good-eye catches from Joel Fernandes. - SRCU updates, most notably changes enabling call_srcu() to be invoked very early in the boot sequence. - Torture-test updates, including some preliminary work towards making rcutorture better able to find problems that result in insufficient grace-period forward progress. - Initial changes to RCU to better promote forward progress of grace periods, including fixing a bug found by Marius Hillenbrand and David Woodhouse, with the fix suggested by Peter Zijlstra" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) srcu: Make early-boot call_srcu() reuse workqueue lists rcutorture: Test early boot call_srcu() srcu: Make call_srcu() available during very early boot rcu: Convert rcu_state.ofl_lock to raw_spinlock_t rcu: Remove obsolete ->dynticks_fqs and ->cond_resched_completed rcu: Switch ->dynticks to rcu_data structure, remove rcu_dynticks rcu: Switch dyntick nesting counters to rcu_data structure rcu: Switch urgent quiescent-state requests to rcu_data structure rcu: Switch lazy counts to rcu_data structure rcu: Switch last accelerate/advance to rcu_data structure rcu: Switch ->tick_nohz_enabled_snap to rcu_data structure rcu: Merge rcu_dynticks structure into rcu_data structure rcu: Remove unused rcu_dynticks_snap() from Tiny RCU rcu: Convert "1UL << x" to "BIT(x)" rcu: Avoid resched_cpu() when rescheduling the current CPU rcu: More aggressively enlist scheduler aid for nohz_full CPUs rcu: Compute jiffies_till_sched_qs from other kernel parameters rcu: Provide functions for determining if call_rcu() has been invoked rcu: Eliminate ->rcu_qs_ctr from the rcu_dynticks structure rcu: Motivate Tiny RCU forward progress ...
2018-10-23Merge branch 'x86/cache' into perf/core, to pick up fixesIngo Molnar4-10/+184
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-23Merge tag 'pm-4.20-rc1' of ↵Linus Torvalds9-898/+1096
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These make hibernation on 32-bit x86 systems work in all of the cases in which it works on 64-bit x86 ones, update the menu cpuidle governor and the "polling" state to make them more efficient, add more hardware support to cpufreq drivers and fix issues with some of them, fix a bug in the conservative cpufreq governor, fix the operating performance points (OPP) framework and make it more stable, update the devfreq subsystem to take changes in the APIs used by into account and clean up some things all over. Specifics: - Backport hibernation bug fixes from x86-64 to x86-32 and consolidate hibernation handling on x86 to allow 32-bit systems to work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen Yu). - Fix hibernation documentation (Vladimir D. Seleznev). - Update the menu cpuidle governor to fix a couple of issues with it, make it more efficient in some cases and clean it up (Rafael Wysocki). - Rework the cpuidle polling state implementation to make it more efficient (Rafael Wysocki). - Clean up the cpuidle core somewhat (Fieah Lim). - Fix the cpufreq conservative governor to take policy limits into account properly in some cases (Rafael Wysocki). - Add support for retrieving guaranteed performance information to the ACPI CPPC library and make the intel_pstate driver use it to expose the CPU base frequency via sysfs on systems with the hardware-managed P-states (HWP) feature enabled (Srinivas Pandruvada). - Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor). - Get rid of device_node.name printing from cpufreq (Rob Herring). - Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa). - Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju Das). - Update the dt-platdev cpufreq driver to allow RK3399 to have separate tunables per cluster (Dmitry Torokhov). - Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver (Christoph Hellwig). - Make the imx6q cpufreq driver read OCOTP through nvmem for imx6ul/imx6ull (Anson Huang). - Fix several bugs in the operating performance points (OPP) framework and make it more stable (Viresh Kumar, Dave Gerlach). - Update the devfreq subsystem to take changes in the APIs used by into account, fix some issues with it and make it stop print device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra, Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang). - Prepare the generic power domains (genpd) framework for dealing with domains containing CPUs (Ulf Hansson). - Prevent sysfs attributes representing low-power S0 residency counters from being exposed if low-power S0 support is not indicated in ACPI FADT (Rajneesh Bhardwaj). - Get rid of custom CPU features macros for Intel CPUs from the intel_idle and RAPL drivers (Andy Shevchenko). - Update the tasks freezer to list tasks that refused to freeze and caused a system transition to a sleep state to be aborted (Todd Brandt). - Update the pm-graph set of tools to v5.2 (Todd Brandt). - Fix some issues in the cpupower utility (Anders Roxell, Prarit Bhargava)" * tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits) PM / Domains: Document flags for genpd PM / Domains: Deal with multiple states but no governor in genpd PM / Domains: Don't treat zero found compatible idle states as an error cpuidle: menu: Avoid computations when result will be discarded cpuidle: menu: Drop redundant comparison cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent() cpufreq: conservative: Take limits changes into account properly Documentation: intel_pstate: Add base_frequency information cpufreq: intel_pstate: Add base_frequency attribute ACPI / CPPC: Add support for guaranteed performance cpuidle: menu: Simplify checks related to the polling state PM / tools: sleepgraph and bootgraph: upgrade to v5.2 PM / tools: sleepgraph: first batch of v5.2 changes cpupower: Fix coredump on VMWare cpupower: Fix AMD Family 0x17 msr_pstate size cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster cpuidle: poll_state: Revise loop termination condition cpuidle: menu: Move the latency_req == 0 special case check cpuidle: menu: Avoid computations for very close timers ...
2018-10-23tc-tests: test denial of 'goto chain' for exceed traffic in police.jsonDavide Caratti1-0/+24
add test to verify if act_police forbids 'goto chain' control actions for 'exceed' traffic. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23tc-tests: test denial of 'goto chain' on 'random' traffic in gact.jsonDavide Caratti1-0/+24
add test to verify if act_gact forbids 'goto chain' control actions on 'random' traffic in gact.json. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23Merge tag 'spi-v5.0' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "One new core feature here, a small collection of new drivers and a bunch of small improvements in existing drivers: - A new CS_WORD flag for transfers where the chip select is toggled at every word, with both a generic implementation and the ability for controllers to do this automatically (including a DaVinci one). - New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum SPI and ST STM32 QSPI plus new IDs for several existing ones" * tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits) spi: lpspi: add imx8qxp compatible string spi: Allow building SPI_BCM63XX_HSSPI on ARM-based SoCs spi: omap2-mcspi: Add slave mode support spi: omap2-mcspi: Set FIFO DMA trigger level to word length spi: omap2-mcspi: Switch to readl_poll_timeout() spi: spi-mem: add stm32 qspi controller dt-bindings: spi: add stm32 qspi controller spi: sh-msiof: document R8A779{7|8}0 bindings spi: pic32-sqi: don't pass GFP_DMA32 to dma_alloc_coherent MAINTAINERS: Add entry for Broadcom SPI controller spi: sh-msiof: fix deferred probing spi: imx: use PIO mode if size is small spi: imx: correct wml as the last sg length spi: imx: move wml setting to later than setup_transfer PCI: Provide pci_match_id() with CONFIG_PCI=n spi: Make GPIO CSs honour the SPI_NO_CS flag spi/spi-pxa2xx: add PXA2xx SSP SPI Controller spi: pxa2xx: Add devicetree support spi: pxa2xx: Use an enum for type spi: spi-geni-qcom: Add SPI driver support for GENI based QUP ...
2018-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller39-318/+1379
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-10-21 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Implement two new kind of BPF maps, that is, queue and stack map along with new peek, push and pop operations, from Mauricio. 2) Add support for MSG_PEEK flag when redirecting into an ingress psock sk_msg queue, and add a new helper bpf_msg_push_data() for insert data into the message, from John. 3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use direct packet access for __skb_buff, from Song. 4) Use more lightweight barriers for walking perf ring buffer for libbpf and perf tool as well. Also, various fixes and improvements from verifier side, from Daniel. 5) Add per-symbol visibility for DSO in libbpf and hide by default global symbols such as netlink related functions, from Andrey. 6) Two improvements to nfp's BPF offload to check vNIC capabilities in case prog is shared with multiple vNICs and to protect against mis-initializing atomic counters, from Jakub. 7) Fix for bpftool to use 4 context mode for the nfp disassembler, also from Jakub. 8) Fix a return value comparison in test_libbpf.sh and add several bpftool improvements in bash completion, documentation of bpf fs restrictions and batch mode summary print, from Quentin. 9) Fix a file resource leak in BPF selftest's load_kallsyms() helper, from Peng. 10) Fix an unused variable warning in map_lookup_and_delete_elem(), from Alexei. 11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc, from Nicolas. 12) Add missing executables to .gitignore in BPF selftests, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller14-45/+123
David Ahern's dump indexing bug fix in 'net' overlapped the change of the function signature of inet6_fill_ifaddr() in 'net-next'. Trivially resolved. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-21tools: bpftool: fix completion for "bpftool map update"Quentin Monnet1-1/+1
When trying to complete "bpftool map update" commands, the call to printf would print an error message that would show on the command line if no map is found to complete the command line. Fix it by making sure we have map ids to complete the line with, before we try to print something. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-21tools: bpftool: print nb of cmds to stdout (not stderr) for batch modeQuentin Monnet1-1/+2
When batch mode is used and all commands succeeds, bpftool prints the number of commands processed to stderr. There is no particular reason to use stderr for this, we could as well use stdout. It would avoid getting unnecessary output on stderr if the standard ouptut is redirected, for example. Reported-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-21tools: bpftool: document restriction on '.' in names to pin in bpffsQuentin Monnet2-3/+9
Names used to pin eBPF programs and maps under the eBPF virtual file system cannot contain a dot character, which is reserved for future extensions of this file system. Document this in bpftool man pages to avoid users getting confused if pinning fails because of a dot. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-21Merge branch 'spi-4.20' into spi-nextMark Brown1-3/+3
2018-10-21selftests/bpf: fix return value comparison for tests in test_libbpf.shQuentin Monnet1-1/+1
The return value for each test in test_libbpf.sh is compared with if (( $? == 0 )) ; then ... This works well with bash, but not with dash, that /bin/sh is aliased to on some systems (such as Ubuntu). Let's replace this comparison by something that works on both shells. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-21bpf, libbpf: simplify and cleanup perf ring buffer walkDaniel Borkmann4-52/+47
Simplify bpf_perf_event_read_simple() a bit and fix up some minor things along the way: the return code in the header is not of type int but enum bpf_perf_event_ret instead. Once callback indicated to break the loop walking event data, it also needs to be consumed in data_tail since it has been processed already. Moreover, bpf_perf_event_print_t callback should avoid void * as we actually get a pointer to struct perf_event_header and thus applications can make use of container_of() to have type checks. The walk also doesn't have to use modulo op since the ring size is required to be power of two. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-21bpf, verifier: fix register type dump in xadd and stDaniel Borkmann1-5/+5
Using reg_type_str[insn->dst_reg] is incorrect since insn->dst_reg contains the register number but not the actual register type. Add a small reg_state() helper and use it to get to the type. Also fix up the test_verifier test cases that have an incorrect errstr. Fixes: 9d2be44a7f33 ("bpf: Reuse canonical string formatter for ctx errs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-20bpf: test_sockmap add options to use msg_push_dataJohn Fastabend2-26/+129
Add options to run msg_push_data, this patch creates two more flags in test_sockmap that can be used to specify the offset and length of bytes to be added. The new options are --txmsg_start_push to specify where bytes should be inserted and --txmsg_end_push to specify how many bytes. This is analagous to the options that are used to pull data, --txmsg_start and --txmsg_end. In addition to adding the options tests are added to the test suit to run the tests similar to what was done for msg_pull_data. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-20bpf: libbpf support for msg_push_dataJohn Fastabend2-1/+21
Add support for new bpf_msg_push_data in libbpf. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-20Merge branch 'perf-urgent-for-linus' of ↵Greg Kroah-Hartman12-45/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Ingo writes: "perf fixes: Misc perf tooling fixes." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Stop fallbacking to kallsyms for vdso symbols lookup perf tools: Pass build flags to traceevent build perf report: Don't crash on invalid inline debug information perf cpu_map: Align cpu map synthesized events properly. perf tools: Fix tracing_path_mount proper path perf tools: Fix use of alternatives to find JDIR perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus perf vendor events intel: Fix wrong filter_band* values for uncore events Revert "perf tools: Fix PMU term format max value calculation" tools headers uapi: Sync kvm.h copy tools arch uapi: Sync the x86 kvm.h copy
2018-10-20Merge tag 'trace-v4.19-rc8-2' of ↵Greg Kroah-Hartman1-0/+80
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Steven writes: "tracing: A few small fixes to synthetic events Masami found some issues with the creation of synthetic events. The first two patches fix handling of unsigned type, and handling of a space before an ending semi-colon. The third patch adds a selftest to test the processing of synthetic events." * tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests: ftrace: Add synthetic event syntax testcase tracing: Fix synthetic event to allow semicolon at end tracing: Fix synthetic event to accept unsigned modifier
2018-10-20selftests: ftrace: Add synthetic event syntax testcaseMasami Hiramatsu1-0/+80
Add a testcase to check the syntax and field types for synthetic_events interface. Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-10-19bpf: add tests for direct packet access from CGROUP_SKBSong Liu1-0/+171
Tests are added to make sure CGROUP_SKB cannot access: tc_classid, data_meta, flow_keys and can read and write: mark, prority, and cb[0-4] and can read other fields. To make selftest with skb->sk work, a dummy sk is added in bpf_prog_test_run_skb(). Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19bpf, libbpf: use correct barriers in perf ring buffer walkDaniel Borkmann1-6/+4
Given libbpf is a generic library and not restricted to x86-64 only, the compiler barrier in bpf_perf_event_read_simple() after fetching the head needs to be replaced with smp_rmb() at minimum. Also, writing out the tail we should use WRITE_ONCE() to avoid store tearing. Now that we have the logic in place in ring_buffer_read_head() and ring_buffer_write_tail() helper also used by perf tool which would select the correct and best variant for a given architecture (e.g. x86-64 can avoid CPU barriers entirely), make use of these in order to fix bpf_perf_event_read_simple(). Fixes: d0cabbb021be ("tools: bpf: move the event reading loop to libbpf") Fixes: 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19tools, perf: add and use optimized ring_buffer_{read_head, write_tail} helpersDaniel Borkmann9-12/+250
Currently, on x86-64, perf uses LFENCE and MFENCE (rmb() and mb(), respectively) when processing events from the perf ring buffer which is unnecessarily expensive as we can do more lightweight in particular given this is critical fast-path in perf. According to Peter rmb()/mb() were added back then via a94d342b9cb0 ("tools/perf: Add required memory barriers") at a time where kernel still supported chips that needed it, but nowadays support for these has been ditched completely, therefore we can fix them up as well. While for x86-64, replacing rmb() and mb() with smp_*() variants would result in just a compiler barrier for the former and LOCK + ADD for the latter (__sync_synchronize() uses slower MFENCE by the way), Peter suggested we can use smp_{load_acquire,store_release}() instead for architectures where its implementation doesn't resolve in slower smp_mb(). Thus, e.g. in x86-64 we would be able to avoid CPU barrier entirely due to TSO. For architectures where the latter needs to use smp_mb() e.g. on arm, we stick to cheaper smp_rmb() variant for fetching the head. This work adds helpers ring_buffer_read_head() and ring_buffer_write_tail() for tools infrastructure that either switches to smp_load_acquire() for architectures where it is cheaper or uses READ_ONCE() + smp_rmb() barrier for those where it's not in order to fetch the data_head from the perf control page, and it uses smp_store_release() to write the data_tail. Latter is smp_mb() + WRITE_ONCE() combination or a cheaper variant if architecture allows for it. Those that rely on smp_rmb() and smp_mb() can further improve performance in a follow up step by implementing the two under tools/arch/*/include/asm/barrier.h such that they don't have to fallback to rmb() and mb() in tools/include/asm/barrier.h. Switch perf to use ring_buffer_read_head() and ring_buffer_write_tail() so it can make use of the optimizations. Later, we convert libbpf as well to use the same helpers. Side note [0]: the topic has been raised of whether one could simply use the C11 gcc builtins [1] for the smp_load_acquire() and smp_store_release() instead: __atomic_load_n(ptr, __ATOMIC_ACQUIRE); __atomic_store_n(ptr, val, __ATOMIC_RELEASE); Kernel and (presumably) tooling shipped along with the kernel has a minimum requirement of being able to build with gcc-4.6 and the latter does not have C11 builtins. While generally the C11 memory models don't align with the kernel's, the C11 load-acquire and store-release alone /could/ suffice, however. Issue is that this is implementation dependent on how the load-acquire and store-release is done by the compiler and the mapping of supported compilers must align to be compatible with the kernel's implementation, and thus needs to be verified/tracked on a case by case basis whether they match (unless an architecture uses them also from kernel side). The implementations for smp_load_acquire() and smp_store_release() in this patch have been adapted from the kernel side ones to have a concrete and compatible mapping in place. [0] http://patchwork.ozlabs.org/patch/985422/ [1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19selftests/bpf: add missing executables to .gitignoreAnders Roxell1-0/+2
Fixes: 371e4fcc9d96 ("selftests/bpf: cgroup local storage-based network counters") Fixes: 370920c47b26 ("selftests/bpf: Test libbpf_{prog,attach}_type_by_name") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19selftests/bpf: add test cases for queue and stack mapsMauricio Vasquez B9-1/+313
test_maps: Tests that queue/stack maps are behaving correctly even in corner cases test_progs: Tests new ebpf helpers Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19Sync uapi/bpf.h to tools/includeMauricio Vasquez B1-1/+29
Sync both files. Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+9
net/sched/cls_api.c has overlapping changes to a call to nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL to the 5th argument, and another (from 'net-next') added cb->extack instead of NULL to the 6th argument. net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to code which moved (to mr_table_dump)) in 'net-next'. Thanks to David Ahern for the heads up. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19Merge tag 'usb-4.19-final' of ↵Greg Kroah-Hartman1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb I wrote: "USB fixes for 4.19-final Here are a small number of last-minute USB driver fixes Included here are: - spectre fix for usb storage gadgets - xhci fixes - cdc-acm fixes - usbip fixes for reported problems All of these have been in linux-next with no reported issues." * tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: storage: Fix Spectre v1 vulnerability USB: fix the usbfs flag sanitization for control transfers usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable cdc-acm: correct counting of UART states in serial state notification cdc-acm: do not reset notification buffer index upon urb unlinking cdc-acm: fix race between reset and control messaging usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control() selftests: usbip: add wait after attach and before checking port status
2018-10-18tools: bpftool: use 4 context mode for the NFP disasmJakub Kicinski4-9/+20
The nfp driver is currently always JITing the BPF for 4 context/thread mode of the NFP flow processors. Tell this to the disassembler, otherwise some registers may be incorrectly decoded. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-18selftests/bpf: fix file resource leak in load_kallsymsPeng Hao1-0/+1
FILE pointer variable f is opened but never closed. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-18Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki9-898/+1096
* pm-devfreq: PM / devfreq: remove redundant null pointer check before kfree PM / devfreq: stopping the governor before device_unregister() PM / devfreq: Convert to using %pOFn instead of device_node.name PM / devfreq: Make update_devfreq() public PM / devfreq: Don't adjust to user limits in governors PM / devfreq: Fix handling of min/max_freq == 0 PM / devfreq: Drop custom MIN/MAX macros PM / devfreq: Fix devfreq_add_device() when drivers are built as modules. * pm-tools: PM / tools: sleepgraph and bootgraph: upgrade to v5.2 PM / tools: sleepgraph: first batch of v5.2 changes cpupower: Fix coredump on VMWare cpupower: Fix AMD Family 0x17 msr_pstate size cpupower: remove stringop-truncation waring
2018-10-18Merge tag 'perf-urgent-for-mingo-4.19-20181017' of ↵Ingo Molnar12-45/+39
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Stop falling back to kallsyms for vDSO symbols lookup, this wasn't being really used and is not valid in arches such as Sparc, where user and kernel space don't share the address space, relying only on cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo) - Align CPU map synthesized events properly, fixing SIGBUS in CPUs like Sparc (David Miller) - Fix use of alternatives to find JDIR (Jarod Wilson) - Store IDs for events with their own CPUs when synthesizing user level event details (scale, unit, etc) events, fixing a crash when recording a PMU event with a cpumask defined (Jiri Olsa) - Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa) - Fix detection of tracefs path in systems without tracefs, where that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa) - Pass build flags to traceevent build, allowing using alternative flags in distro packages, RPM, for instance (Jiri Olsa) - Fix 'perf report' crash on invalid inline debug information (Milian Wolff) - Synch KVM UAPI copies (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-18bpf: fix doc of bpf_skb_adjust_room() in uapiNicolas Dichtel1-1/+1
len_diff is signed. Fixes: fa15601ab31e ("bpf: add documentation for eBPF helpers (33-41)") CC: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-17perf tools: Stop fallbacking to kallsyms for vdso symbols lookupArnaldo Carvalho de Melo1-19/+2
David reports that: <quote> Perf has this hack where it uses the kernel symbol map as a backup when a symbol can't be found in the user's symbol table(s). This causes problems because the tests driving this code path use machine__kernel_ip(), and that is completely meaningless on Sparc. On sparc64 the kernel and user live in physically separate virtual address spaces, rather than a shared one. And the kernel lives at a virtual address that overlaps common userspace addresses. So this test passes almost all the time when a user symbol lookup fails. The consequence of this is that, if the unfound user virtual address in the sample doesn't match up to a kernel symbol either, we trigger things like this code in builtin-top.c: if (al.sym == NULL && al.map != NULL) { const char *msg = "Kernel samples will not be resolved.\n"; /* * As we do lazy loading of symtabs we only will know if the * specified vmlinux file is invalid when we actually have a * hit in kernel space and then try to load it. So if we get * here and there are _no_ symbols in the DSO backing the * kernel map, bail out. * * We may never get here, for instance, if we use -K/ * --hide-kernel-symbols, even if the user specifies an * invalid --vmlinux ;-) */ if (!machine->kptr_restrict_warned && !top->vmlinux_warned && __map__is_kernel(al.map) && map__has_symbols(al.map)) { if (symbol_conf.vmlinux_name) { char serr[256]; dso__strerror_load(al.map->dso, serr, sizeof(serr)); ui__warning("The %s file can't be used: %s\n%s", symbol_conf.vmlinux_name, serr, msg); } else { ui__warning("A vmlinux file was not found.\n%s", msg); } if (use_browser <= 0) sleep(5); top->vmlinux_warned = true; } } When I fire up a compilation on sparc, this triggers immediately. I'm trying to figure out what the "backup to kernel map" code is accomplishing. I see some language in the current code and in the changes that have happened in this area talking about vdso. Does that really happen? The vdso is mapped into userspace virtual addresses, not kernel ones. More history. This didn't cause problems on sparc some time ago, because the kernel IP check used to be "ip < 0" :-) Sparc kernel addresses are not negative. But now with machine__kernel_ip(), which works using the symbol table determined kernel address range, it does trigger. What it all boils down to is that on architectures like sparc, machine__kernel_ip() should always return false in this scenerio, and therefore this kind of logic: if (cpumode == PERF_RECORD_MISC_USER && machine && mg != &machine->kmaps && machine__kernel_ip(machine, al->addr)) { is basically invalid. PERF_RECORD_MISC_USER implies no kernel address can possibly match for the sample/event in question (no matter how hard you try!) :-) </> So, I thought something had changed and in the past we would somehow find that address in the kallsyms, but I couldn't find anything to back that up, the patch introducing this is over a decade old, lots of things changed, so I was just thinking I was missing something. I tried a gtod busy loop to generate vdso activity and added a 'perf probe' at that branch, on x86_64 to see if it ever gets hit: Made thread__find_map() noinline, as 'perf probe' in lines of inline functions seems to not be working, only at function start. (Masami?) # perf probe -x ~/bin/perf -L thread__find_map:57 <thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57> 57 if (cpumode == PERF_RECORD_MISC_USER && machine && 58 mg != &machine->kmaps && 59 machine__kernel_ip(machine, al->addr)) { 60 mg = &machine->kmaps; 61 load_map = true; 62 goto try_again; } } else { /* * Kernel maps might be changed when loading * symbols so loading * must be done prior to using kernel maps. */ 69 if (load_map) 70 map__load(al->map); 71 al->addr = al->map->map_ip(al->map, al->addr); # perf probe -x ~/bin/perf thread__find_map:60 Added new event: probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:thread__find_map -aR sleep 1 # Then used this to see if, system wide, those probe points were being hit: # perf trace -e *perf:thread*/max-stack=8/ ^C[root@jouet ~]# No hits when running 'perf top' and: # cat gtod.c #include <sys/time.h> int main(void) { struct timeval tv; while (1) gettimeofday(&tv, 0); return 0; } [root@jouet c]# ./gtod ^C Pressed 'P' in 'perf top' and the [vdso] samples are there: 62.84% [vdso] [.] __vdso_gettimeofday 8.13% gtod [.] main 7.51% [vdso] [.] 0x0000000000000914 5.78% [vdso] [.] 0x0000000000000917 5.43% gtod [.] _init 2.71% [vdso] [.] 0x000000000000092d 0.35% [kernel] [k] native_io_delay 0.33% libc-2.26.so [.] __memmove_avx_unaligned_erms 0.20% [vdso] [.] 0x000000000000091d 0.17% [i2c_i801] [k] i801_access 0.06% firefox [.] free 0.06% libglib-2.0.so.0.5400.3 [.] g_source_iter_next 0.05% [vdso] [.] 0x0000000000000919 0.05% libpthread-2.26.so [.] __pthread_mutex_lock 0.05% libpixman-1.so.0.34.0 [.] 0x000000000006d3a7 0.04% [kernel] [k] entry_SYSCALL_64_trampoline 0.04% libxul.so [.] style::dom_apis::query_selector_slow 0.04% [kernel] [k] module_get_kallsym 0.04% firefox [.] malloc 0.04% [vdso] [.] 0x0000000000000910 I added a 'perf probe' to thread__find_map:69, and that surely got tons of hits, i.e. for every map found, just to make sure the 'perf probe' command was really working. In the process I noticed a bug, we're only have records for '[vdso]' for pre-existing commands, i.e. ones that are running when we start 'perf top', when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps. I.e. like this, for preexisting processes with a vdso map, again, tracing for all the system, only pre-existing processes get a [vdso] map (when having one): [root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso Added new event: probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1 [root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/ 0.000 probe_perf:__machine__addnew_vdso:(568eb3) __machine__addnew_vdso (/home/acme/bin/perf) map__new (/home/acme/bin/perf) machine__process_mmap2_event (/home/acme/bin/perf) machine__process_event (/home/acme/bin/perf) perf_event__process (/home/acme/bin/perf) perf_tool__process_synth_event (/home/acme/bin/perf) perf_event__synthesize_mmap_events (/home/acme/bin/perf) __event__synthesize_thread (/home/acme/bin/perf) The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow 'perf top' is not getting those records while 'perf record' is: # perf record ~acme/c/gtod ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ] # perf report -D | grep PERF_RECORD_MMAP2 71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137 541179306]: r-xp /home/acme/c/gtod 71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00 3146370 854107250]: r-xp /usr/lib64/ld-2.26.so 71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso] 71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00 3149723 262067164]: r-xp /usr/lib64/libc-2.26.so # # perf script | grep vdso | head gtod 25484 71293.612768: 2485554 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso]) gtod 25484 71293.613576: 2149343 cycles:ppp: 7ffcdb53a917 [unknown] ([vdso]) gtod 25484 71293.614274: 1814652 cycles:ppp: 7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso]) gtod 25484 71293.614862: 1669070 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso]) gtod 25484 71293.615404: 1451589 cycles:ppp: 7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso]) gtod 25484 71293.615999: 1269941 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso]) gtod 25484 71293.616405: 1177946 cycles:ppp: 7ffcdb53a914 [unknown] ([vdso]) gtod 25484 71293.616775: 1121290 cycles:ppp: 7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso]) gtod 25484 71293.617150: 1037721 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso]) gtod 25484 71293.617478: 994526 cycles:ppp: 7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso]) # The patch is the obvious one and with it we also continue to resolve vdso symbols for pre-existing processes in 'perf top' and for all processes in 'perf record' + 'perf report/script'. Suggested-by: David Miller <davem@davemloft.net> Acked-by: David Miller <davem@davemloft.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-17tools/testing/nvdimm: Populate dirty shutdown dataDan Williams3-1/+11
Allow the unit tests to verify the retrieval of the dirty shutdown count via smart commands, and allow the driver-load-time retrieval of the smart health payload to be simulated by nfit_test. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-17acpi, nfit: Collect shutdown statusDan Williams2-24/+1
Some NVDIMMs, in addition to providing an indication of whether the previous shutdown was clean, also provide a running count of lifetime dirty-shutdown events for the device. In anticipation of this functionality appearing on more devices arrange for the nfit driver to retrieve / cache this data at DIMM discovery time, and export it via sysfs. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-17bpf: sockmap, add msg_peek tests to test_sockmapJohn Fastabend1-52/+115
Add tests that do a MSG_PEEK recv followed by a regular receive to test flag support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17libbpf: Per-symbol visibility for DSOAndrey Ignatov4-148/+179
Make global symbols in libbpf DSO hidden by default with -fvisibility=hidden and export symbols that are part of ABI explicitly with __attribute__((visibility("default"))). This is common practice that should prevent from accidentally exporting a symbol, that is not supposed to be a part of ABI what, in turn, improves both libbpf developer- and user-experiences. See [1] for more details. Export control becomes more important since more and more projects use libbpf. The patch doesn't export a bunch of netlink related functions since as agreed in [2] they'll be reworked. That doesn't break bpftool since bpftool links libbpf statically. [1] https://www.akkadia.org/drepper/dsohowto.pdf (2.2 Export Control) [2] https://www.mail-archive.com/netdev@vger.kernel.org/msg251434.html Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-16perf tools: Pass build flags to traceevent buildJiri Olsa1-1/+1
So the extra user build flags are propagated to libtraceevent. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: "Herton R. Krzesinski" <herton@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Link: http://lkml.kernel.org/r/20181016150614.21260-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-16perf report: Don't crash on invalid inline debug informationMilian Wolff1-0/+3
When the function name for an inline frame is invalid, we must not try to demangle this symbol, otherwise we crash with: #0 0x0000555555895c01 in bfd_demangle () #1 0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215 #2 dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400 #3 0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89 #4 inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264 #5 0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0, line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313 #6 0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf") at util/srcline.c:358 So instead handle the case where we get invalid function names for inlined frames and use a fallback '??' function name instead. While this crash was originally reported by Hadrien for rust code, I can now also reproduce it with trivial C++ code. Indeed, it seems like libbfd fails to interpret the debug information for the inline frame symbol name: $ addr2line -e /home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf -if b48 main /usr/include/c++/8.2.1/complex:610 ?? /usr/include/c++/8.2.1/complex:618 ?? /usr/include/c++/8.2.1/complex:675 ?? /usr/include/c++/8.2.1/complex:685 main /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 I've reported this bug upstream and also attached a patch there which should fix this issue: https://sourceware.org/bugzilla/show_bug.cgi?id=23715 Reported-by: Hadrien Grasland <grasland@lal.in2p3.fr> Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a64489c56c30 ("perf report: Find the inline stack for a given address") [ The above 'Fixes:' cset is where originally the problem was introduced, i.e. using a2l->funcname without checking if it is NULL, but this current patch fixes the current codebase, i.e. multiple csets were applied after a64489c56c30 before the problem was reported by Hadrien ] Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-16Merge branch 'x86/build' into locking/core, to pick up dependent patches and ↵Ingo Molnar75-69/+996
unify jump-label work Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-16perf cpu_map: Align cpu map synthesized events properly.David Miller1-0/+1
The size of the resulting cpu map can be smaller than a multiple of sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event will not be aligned properly. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Fixes: 6c872901af07 ("perf cpu_map: Add cpu_map event synthesize function") Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-16perf tools: Fix tracing_path_mount proper pathJiri Olsa1-2/+2
If there's no tracefs (RHEL7) support the tracing_path_mount returns debugfs path which results in following fail: # perf probe sys_write kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS. Error: Failed to add events. In tracing_path_debugfs_mount function we need to return the 'tracing' path instead of just the mount to make it work: # perf probe sys_write Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 Adding the 'return tracing_path;' also to tracing_path_tracefs_mount function just for consistency with tracing_path_debugfs_mount. Upstream keeps working, because it has the tracefs support. Link: http://lkml.kernel.org/n/tip-yiwkzexq9fk1ey1xg3gnjlw4@git.kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: 23773ca18b39 ("perf tools: Make perf aware of tracefs") Link: http://lkml.kernel.org/r/20181016114818.3595-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-16bpf, tls: add tls header to tools infrastructureDaniel Borkmann2-5/+86
Andrey reported a build error for the BPF kselftest suite when compiled on a machine which does not have tls related header bits installed natively: test_sockmap.c:120:23: fatal error: linux/tls.h: No such file or directory #include <linux/tls.h> ^ compilation terminated. Fix it by adding the header to the tools include infrastructure and add definitions such as SOL_TLS that could potentially be missing. Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>