| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 4d2868b5d191c74262f7407972d68d1bf3245d6a upstream.
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bec1f3b119ebc613d08dfbcdbaef01a79aa7de92 upstream.
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 30b651c8bc788c068a978dc760e9d5f824f7019e upstream.
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ]
Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT
configs. In this particular case, the base VM is AMD with 166 cpus, and I
run selftests with regular qemu on top of that and indeed send_signal test
failed. I also tried with an Intel box with 80 cpus and there is no issue.
The main qemu command line includes:
-enable-kvm -smp 16 -cpu host
The failure log looks like:
$ ./test_progs -t send_signal
[ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225]
[ 48.503622] Modules linked in: bpf_testmod(O)
[ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69
[ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290
[ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb
[ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246
[ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0
[ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000
[ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000
[ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280
[ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000
[ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0
[ 48.537538] Call Trace:
[ 48.537538] <IRQ>
[ 48.537538] ? watchdog_timer_fn+0x1cd/0x250
[ 48.539590] ? lockup_detector_update_enable+0x50/0x50
[ 48.539590] ? __hrtimer_run_queues+0xff/0x280
[ 48.542520] ? hrtimer_interrupt+0x103/0x230
[ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140
[ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90
[ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 48.547612] ? handle_softirqs+0x71/0x290
[ 48.547612] irq_exit_rcu+0x63/0x80
[ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90
[ 48.552521] </IRQ>
[ 48.553529] <TASK>
[ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260
[ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74
[ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282
[ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620
[ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00
[ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000
[ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000
[ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00
[ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260
[ 48.576523] __schedule+0x364/0xac0
[ 48.577535] schedule+0x2e/0x110
[ 48.578555] pipe_read+0x301/0x400
[ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30
[ 48.579589] vfs_read+0x2b3/0x2f0
[ 48.579589] ksys_read+0x8b/0xc0
[ 48.583590] do_syscall_64+0x3d/0xc0
[ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 48.586525] RIP: 0033:0x7f2f28703fa1
[ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0
[ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1
[ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006
[ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000
[ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0
[ 48.605527] </TASK>
In the test, two processes are communicating through pipe. Further debugging
with strace found that the above splat is triggered as read() syscall could
not receive the data even if the corresponding write() syscall in another
process successfully wrote data into the pipe.
The failed subtest is "send_signal_perf". The corresponding perf event has
sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every
overflow event will trigger a call to the BPF program. So I suspect this may
overwhelm the system. So I increased the sample_period to 100,000 and the test
passed. The sample_period 10,000 still has the test failed.
In other parts of selftest, e.g., [1], sample_freq is used instead. So I
decided to use sample_freq = 1,000 since the test can pass as well.
[1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 170c966cbe274e664288cfc12ee919d5e706dc50 ]
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f833470c27832136d4416d8fc55d658082af0989 upstream.
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 935ff5bb8a1cfcdf8e60c8f5c794d0bbbc234437 upstream.
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c70bcc2a84cf925f655ea1ac4b8088062b144a3 upstream.
In main_loop_s function, when the open(cfg_input, O_RDONLY) function is
run, the last fd is not closed if the "--cfg_repeat > 0" branch is not
taken.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a2f48992ddf4b8c2fba846c6754089edae6db5a upstream.
pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.
Fixes: 03668c65d153 ("selftests: mptcp: join: rework detailed report")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 63ba5b0fb4f54db256ec43b3062b2606b383055d ]
Currently, the RISC-V firmware JSON file has duplicate event name
"FW_SFENCE_VMA_RECEIVED". According to the RISC-V SBI PMU extension[1],
the event name should be "FW_SFENCE_VMA_ASID_SENT".
Before this patch:
$ perf list
firmware:
fw_access_load
[Load access trap event. Unit: cpu]
fw_access_store
[Store access trap event. Unit: cpu]
....
fw_set_timer
[Set timer event. Unit: cpu]
fw_sfence_vma_asid_received
[Received SFENCE.VMA with ASID request from other HART event. Unit: cpu]
fw_sfence_vma_received
[Sent SFENCE.VMA with ASID request to other HART event. Unit: cpu]
After this patch:
$ perf list
firmware:
fw_access_load
[Load access trap event. Unit: cpu]
fw_access_store
[Store access trap event. Unit: cpu]
.....
fw_set_timer
[Set timer event. Unit: cpu]
fw_sfence_vma_asid_received
[Received SFENCE.VMA with ASID request from other HART event. Unit: cpu]
fw_sfence_vma_asid_sent
[Sent SFENCE.VMA with ASID request to other HART event. Unit: cpu]
fw_sfence_vma_received
[Received SFENCE.VMA request from other HART event. Unit: cpu]
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-pmu.adoc#event-firmware-events-type-15 [1]
Fixes: 8f0dcb4e7364 ("perf arch events: riscv sbi firmware std event files")
Fixes: c4f769d4093d ("perf vendor events riscv: add Sifive U74 JSON file")
Fixes: acbf6de674ef ("perf vendor events riscv: Add StarFive Dubhe-80 JSON file")
Fixes: 7340c6df49df ("perf vendor events riscv: add T-HEAD C9xx JSON file")
Fixes: f5102e31c209 ("riscv: andes: Support specifying symbolic firmware and hardware raw event")
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240719115018.27356-1-eric.lin@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c17736689ccfc44ec7dcc472577f25c34cf8724 ]
With 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.
The path below could add a callchain_cursor_node with NULL ms.maps.
add_callchain_ip()
thread__find_symbol(.., &al)
thread__find_map(.., &al) // al->maps becomes NULL
ms.maps = maps__get(al.maps)
callchain_cursor_append(..., &ms, ...)
node->ms.maps = maps__get(ms->maps)
Then the path below would dereference NULL maps and get segfault.
fill_callchain_info()
maps__machine(node->ms.maps);
Fix it by checking if maps is NULL in fill_callchain_info().
Fixes: 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yzhong@purestorage.com
Link: https://lore.kernel.org/r/20240722211548.61455-1-cachen@purestorage.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 517125f6749402e579f715519147145944f12ad9 upstream.
Revert commit 90dc946059b7 ("selftests/bpf: DENYLIST.aarch64: Remove
fexit_sleep") again. The fix in 19d3c179a377 ("bpf, arm64: Fix trampoline
for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF
CI is still hanging and timing out:
https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436
[...]
#89/11 fexit_bpf2bpf/func_replace_global_func:OK
#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK
#89/13 fexit_bpf2bpf/func_replace_progmap:OK
#89 fexit_bpf2bpf:OK
Error: The operation was canceled.
Thus more investigation work & fixing is needed before the test can be put
in place again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 92717bc077892d1ce60fee07aee3a33f33909b85 ]
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes: 1553419c3c10 ("perf dso: Fix address sanitizer build")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240715094715.3914813-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
learning limit
[ Upstream commit 863ff546fb62a8fa75757a30794ab6ec6cc4bab7 ]
If the testing kernel doesn't support setting fdb_max_learned or show
fdb_n_learned, just skip it. Or we will get errors like
./bridge_fdb_learning_limit.sh: line 218: [: null: integer expression expected
./bridge_fdb_learning_limit.sh: line 225: [: null: integer expression expected
Fixes: 6f84090333bb ("selftests: forwarding: bridge_fdb_learning_limit: Add a new selftest")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
resolve_btfids
[ Upstream commit 13c9b702e6cb8e406d5fa6b2dca422fa42d2f13e ]
Add a type cast for set8->pairs to fix below compile warning:
main.c: In function 'sets_patch':
main.c:699:50: warning: comparison of distinct pointer types lacks a cast
699 | BUILD_BUG_ON(set8->pairs != &set8->pairs[0].id);
| ^~
Fixes: 9707ac4fe2f5 ("tools/resolve_btfids: Refactor set sorting with types from btf_ids.h")
Signed-off-by: Liwei Song <liwei.song.lsong@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240722083305.4009723-1-liwei.song.lsong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 189f1a976e426011e6a5588f1d3ceedf71fe2965 ]
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e1ef78dce9b7b0fa7f9d88bb3554441d74d33b34 ]
On ARM64 the stack pointer should be aligned at a 16 byte boundary or
the SPAlignmentFault can occur. The fexit_sleep selftest allocates the
stack for the child process as a character array, this is not guaranteed
to be aligned at 16 bytes.
Because of the SPAlignmentFault, the child process is killed before it
can do the nanosleep call and hence fentry_cnt remains as 0. This causes
the main thread to hang on the following line:
while (READ_ONCE(fexit_skel->bss->fentry_cnt) != 2);
Fix this by allocating the stack using mmap() as described in the
example in the man page of clone().
Remove the fexit_sleep test from the DENYLIST of arm64.
Fixes: eddbe8e65214 ("selftest/bpf: Add a test to check trampoline freeing logic.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240715173327.8657-1-puranjay@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 17c743b9da9e0d073ff19fd5313f521744514939 upstream.
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc9101 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3612ca8e2935c4c142d99e33b8effa7045ce32b5 upstream.
The hard-coded metrics is wrongly calculated on the hybrid machine.
$ perf stat -e cycles,instructions -a sleep 1
Performance counter stats for 'system wide':
18,205,487 cpu_atom/cycles/
9,733,603 cpu_core/cycles/
9,423,111 cpu_atom/instructions/ # 0.52 insn per cycle
4,268,965 cpu_core/instructions/ # 0.23 insn per cycle
The insn per cycle for cpu_core should be 4,268,965 / 9,733,603 = 0.44.
When finding the metric events, the find_stat() doesn't take the PMU
type into account. The cpu_atom/cycles/ is wrongly used to calculate
the IPC of the cpu_core.
In the hard-coded metrics, the events from a different PMU are only
SW_CPU_CLOCK and SW_TASK_CLOCK. They both have the stat type,
STAT_NSECS. Except the SW CLOCK events, check the PMU type as well.
Fixes: 0a57b910807a ("perf stat: Use counts rather than saved_value")
Reported-by: Khalil, Amiri <amiri.khalil@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606180316.4122904-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c830eef806679dc243e191f962c488dd9d00708 upstream.
Andrea reported that the following innocuous litmus test:
C T
{}
P0(spinlock_t *x)
{
int r0;
spin_lock(x);
spin_unlock(x);
r0 = spin_is_locked(x);
}
gives rise to a nonsensical empty result with no executions:
$ herd7 -conf linux-kernel.cfg T.litmus
Test T Required
States 0
Ok
Witnesses
Positive: 0 Negative: 0
Condition forall (true)
Observation T Never 0 0
Time T 0.00
Hash=6fa204e139ddddf2cb6fa963bad117c0
The problem is caused by a bug in the lock.cat part of the LKMM. Its
computation of the rf relation for RU (read-unlocked) events is
faulty; it implicitly assumes that every RU event must read from
either a UL (unlock) event in another thread or from the lock's
initial state. Neither is true in the litmus test above, so the
computation yields no possible executions.
The lock.cat code tries to make up for this deficiency by allowing RU
events outside of critical sections to read from the last po-previous
UL event. But it does this incorrectly, trying to keep these rfi links
separate from the rfe links that might also be needed, and passing only
the latter to herd7's cross() macro.
The problem is fixed by merging the two sets of possible rf links for
RU events and using them all in the call to cross().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Closes: https://lore.kernel.org/linux-arch/ZlC0IkzpQdeGj+a3@andrea/
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Fixes: 15553dcbca06 ("tools/memory-model: Add model support for spin_is_locked()")
CC: <stable@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92098b1c10cb29bcc6fa0908a766dc9e16b1e889 upstream.
Fix the following compiler warning on 32bit:
i386-linux-gcc -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 -W -Wall -Wextra -fno-stack-protector -m32 -mstack-protector-guard=global -fstack-protector-all -o nolibc-test \
-nostdlib -nostdinc -static -Isysroot/i386/include nolibc-test.c nolibc-test-linkage.c -lgcc
nolibc-test.c: In function 'expect_str_buf_eq':
nolibc-test.c:610:30: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
610 | llen += printf(" = %lu <%s> ", expr, buf);
| ~~^ ~~~~
| | |
| | size_t {aka unsigned int}
| long unsigned int
| %u
Fixes: 1063649cf531 ("selftests/nolibc: Add tests for strlcat() and strlcpy()")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc374782b6ca0fd634482391da977542443d3368 upstream.
Check that keyctl(KEYCTL_SESSION_TO_PARENT) preserves the parent's
restrictions.
Fixes: e1199815b47b ("selftests/landlock: Add user space tests")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240724.Ood5aige9she@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 34ec4344a5dabbb39e23e8daf30779892c0211a6 ]
Patch series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions".
This patch series fix a minor issue in a program for DAMON selftest, and
implement new functionality selftests for DAMOS tried regions and
{min,max}_nr_regions. The test for max_nr_regions also test the recovery
from online tuning-caused limit violation, which was fixed by a previous
patch [1] titled "mm/damon/core: merge regions aggressively when
max_nr_regions is unmet".
The first patch fixes a minor problem in the articial memory access
pattern generator for tests. Following 3 patches (2-4) implement schemes
tried regions test. Then a couple of patches (5-6) implementing static
setup based {min,max}_nr_regions functionality test follows. Final two
patches (7-8) implement dynamic max_nr_regions update test.
[1] https://lore.kernel.org/20240624210650.53960C2BBFC@smtp.kernel.org
This patch (of 8):
'access_memory' is an artificial memory access pattern generator for DAMON
tests. It creates and accesses memory regions that the user specified the
number and size via the command line. However, real access part of the
program ignores the user-specified size of each region. Instead, it uses
a hard-coded value, 10 MiB. Fix it to use user-defined size.
Note that all existing 'access_memory' users are setting the region size
as 10 MiB. Hence no real problem has happened so far.
Link: https://lkml.kernel.org/r/20240625180538.73134-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240625180538.73134-2-sj@kernel.org
Fixes: b5906f5f7359 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f036e68212c11e5a7edbb59b5e25299341829485 ]
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffa3c799ce157493615f9f3c2b3c9ba602d320b9 ]
commit a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
added tests covering edge cases in the boundaries of iova bitmap. Although
it used buffer sizes thinking in PAGE_SIZE (4K) as opposed to the
MOCK_PAGE_SIZE (2K) that is used in iommufd mock selftests. This meant that
isn't correctly exercising everything specifically the u32 and 4K bitmap
test cases. Fix selftests buffer sizes to be based on mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-5-joao.m.martins@oracle.com
Reported-by: Kevin Tian <kevin.tian@intel.com>
Closes: https://lore.kernel.org/linux-iommu/96efb6cf-a41c-420f-9673-2f0b682cac8c@oracle.com/
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33335584eb78c0bda21ff8d759c39e035abb48ac ]
Add more tests for bitmaps smaller than or equal to an u8, though skip the
tests if the IOVA buffer size is smaller than the mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: ffa3c799ce15 ("iommufd/selftest: Fix tests to use MOCK_PAGE_SIZE based buffer sizes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec61f820a2ff07d1717583bd57d6ee45d2763a6e ]
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/20240627110105.62325-2-joao.m.martins@oracle.com
Reported-by: Matt Ochs <mochs@nvidia.com>
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1553419c3c10cf386496e68b90b5d0ce966ac614 ]
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b40934ae32232140e85dc7dc1c3ea0e296986723 ]
In the past, the exclude_guest setting has had no effect on Intel PT
tracing, but that may not be the case in the future.
Set the flag correctly based upon whether KVM is using Intel PT
"Host/Guest" mode, which is determined by the kvm_intel module
parameter pt_mode:
pt_mode=0 System-wide mode : host and guest output to host buffer
pt_mode=1 Host/Guest mode : host/guest output to host/guest
buffers respectively
Fixes: 6e86bfdc4a60 ("perf intel-pt: Support decoding of guest kernel")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36b4cd990a8fd3f5b748883050e9d8c69fe6398d ]
aux_watermark is a u32. For a 64-bit size, cap the aux_watermark
calculation at UINT_MAX instead of truncating it to 32-bits.
Fixes: 874fc35cdd55 ("perf intel-pt: Use aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-2-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit caa463bb79a82ac5fce05a0dcf7893d94c84fc5e ]
The new --per-cluster option was added recently but it forgot to update
the aggr_header fields which are used for --metric-only option. And it
resulted in a segfault due to NULL string in fputs().
Fixes: cbc917a1b03b ("perf stat: Support per-cluster aggregation")
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628000604.1296808-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ]
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2119 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd9a426eade634bf794c7e0f1b0c6659f556942f ]
In the previous loop, all the members in the aliases[j-1] have been freed
and set to NULL. But in this loop, the function pmu_alias_is_duplicate()
compares the aliases[j] with the aliases[j-1] that has already been
disposed, so the function will always return false and duplicate aliases
will never be discarded.
If we find duplicate aliases, it skips the zfree aliases[j], which is
accompanied by a memory leak.
We can use the next aliases[j+1] to theck for duplicate aliases to
fixes the aliases NULL pointer dereference, then goto zfree code snippet
to release it.
After patch testing:
$ perf list --unit=hisi_sicl,cpa pmu
uncore cpa:
cpa_p0_rd_dat_32b
[Number of read ops transmitted by the P0 port which size is 32 bytes.
Unit: hisi_sicl,cpa]
cpa_p0_rd_dat_64b
[Number of read ops transmitted by the P0 port which size is 64 bytes.
Unit: hisi_sicl,cpa]
Fixes: c3245d2093c1 ("perf pmu: Abstract alias/event struct")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Cc: ravi.bangoria@amd.com
Cc: james.clark@arm.com
Cc: prime.zeng@hisilicon.com
Cc: cuigaosheng1@huawei.com
Cc: jonathan.cameron@huawei.com
Cc: linuxarm@huawei.com
Cc: yangyicong@huawei.com
Cc: robh@kernel.org
Cc: renyu.zj@linux.alibaba.com
Cc: kjain@linux.ibm.com
Cc: john.g.garry@oracle.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240614094318.11607-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0979f008f1352a44cd3c8877e3eb8a1e3e1c6f3 ]
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89ed ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf1435 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff16aeb9b83441b8458d4235496cf320189a0c60 ]
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d82752 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b90dfda222e38b7ca8dad6e098e36f5186f0b94 ]
In the case 'before' and 'after' are broken out from pos,
maps_by_address may be changed by __maps__insert, as such it needs
re-reading.
Don't ignore the return value from __maps_insert.
Fixes: 659ad3492b91 ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-2-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f67a90a0c8f5b3d0acc18f10650d90fec44775f9 ]
Lately, an additional locking was added by commit c0a40097f0bc
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
loops
[ Upstream commit c44000b6535dc9806b9128d1aed403862b2adab9 ]
The imc perf fd close() calls are missing from all error paths. In
addition, get_mem_bw_imc() handles fds in a for loop but close() is
based on two fixed indexes READ and WRITE.
Open code inner for loops to READ+WRITE entries for clarity and add a
function to close() IMC fds properly in all cases.
Fixes: 7f4d257e3a2a ("selftests/resctrl: Add callback to start a benchmark")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52b49ec1b2c78deb258596c3b231201445ef5380 ]
If bpf_object__load() fails in test_xdp_adjust_frags_tail_grow(), "obj"
opened before this should be closed. So use "goto out" to close it instead
of using "return" here.
Fixes: 110221081aac ("bpf: selftests: update xdp_adjust_tail selftest to include xdp frags")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f282a1ed2d0e3fb38cceefec8e81cabb69cab260.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eef0532e900c20a6760da829e82dac3ee18688c5 ]
Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch
platform, some "Segmentation fault" errors occur:
'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec
test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec
test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec
test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec
test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec
test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec
test_update_ca:FAIL:attach_struct_ops unexpected error: -524
settcpca:FAIL:setsockopt unexpected setsockopt: \
actual -1 == expected -1
(network_helpers.c:99: errno: No such file or directory) \
Failed to call post_socket_cb
start_test:FAIL:start_server_str unexpected start_server_str: \
actual -1 == expected -1
test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c]
linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0]
./test_progs(bpf_link__update_map+0x80)[0x555556824a78]
./test_progs(+0x94d68)[0x5555564c4d68]
./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88]
./test_progs(+0x3bde54)[0x5555567ede54]
./test_progs(main+0x61c)[0x5555567efd54]
/usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208]
/usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c]
./test_progs(_start+0x48)[0x55555646bca8]
Segmentation fault
'''
This is because BPF trampoline is not implemented on Loongarch yet,
"link" returned by bpf_map__attach_struct_ops() is NULL. test_progs
crashs when this NULL link passes to bpf_link__update_map(). This
patch adds NULL checks for all links in bpf_tcp_ca to fix these errors.
If "link" is NULL, goto the newly added label "out" to destroy the skel.
v2:
- use "goto out" instead of "return" as Eduard suggested.
Fixes: 06da9f3bd641 ("selftests/bpf: Test switching TCP Congestion Control algorithms.")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit adae187ebedcd95d02f045bc37dfecfd5b29434b ]
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da5f8fd1f0d393d5eaaba9ad8c22d1c26bb2bf9b ]
As Quentin said [0], BPF map pinning will fail if the pinmaps path is not
under the bpffs, like:
libbpf: specified path /home/ubuntu/test/sock_ops_map is not on BPF FS
Error: failed to pin all maps
[0] https://github.com/libbpf/bpftool/issues/146
Fixes: 3767a94b3253 ("bpftool: add pinmaps argument to the load/loadall")
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240702131150.15622-1-chen.dylane@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73a9683cb21012b6c0f14217974837151c527a8 ]
When upgrading to libbpf 1.3 we noticed a big performance hit while
loading programs using CORE on non base-BTF symbols. This was tracked
down to the new BTF sanity check logic. The issue is the base BTF
definitions are checked first for the base BTF and then again for every
module BTF.
Loading 5 dummy programs (using libbpf-rs) that are using CORE on a
non-base BTF symbol on my system:
- Before this fix: 3s.
- With this fix: 0.1s.
Fix this by only checking the types starting at the BTF start id. This
should ensure the base BTF is still checked as expected but only once
(btf->start_id == 1 when creating the base BTF), and then only
additional types are checked for each module BTF.
Fixes: 3903802bb99a ("libbpf: Add basic BTF sanity validation")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240624090908.171231-1-atenart@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc5083d1f3881624ad2de1f3cbb3a07e152cb254 ]
I encountered an issue when building the test_progs from the repository [1]:
$ pwd
/work/Qemu/x86_64/linux-6.10-rc2/tools/testing/selftests/bpf/
$ make test_progs V=1
[...]
./tools/sbin/bpftool gen object ./ip_check_defrag.bpf.linked2.o ./ip_check_defrag.bpf.linked1.o
libbpf: failed to find symbol for variable 'bpf_dynptr_slice' in section '.ksyms'
Error: failed to link './ip_check_defrag.bpf.linked1.o': No such file or directory (2)
[...]
Upon investigation, I discovered that the btf_types referenced in the '.ksyms'
section had a kind of BTF_KIND_FUNC instead of BTF_KIND_VAR:
$ bpftool btf dump file ./ip_check_defrag.bpf.linked1.o
[...]
[2] DATASEC '.ksyms' size=0 vlen=2
type_id=16 offset=0 size=0 (FUNC 'bpf_dynptr_from_skb')
type_id=17 offset=0 size=0 (FUNC 'bpf_dynptr_slice')
[...]
[16] FUNC 'bpf_dynptr_from_skb' type_id=82 linkage=extern
[17] FUNC 'bpf_dynptr_slice' type_id=85 linkage=extern
[...]
For a detailed analysis, please refer to [2]. We can add a kind checking to
fix the issue.
[1] https://github.com/eddyz87/bpf/tree/binsort-btf-dedup
[2] https://lore.kernel.org/all/0c0ef20c-c05e-4db9-bad7-2cbc0d6dfae7@oracle.com/
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240619122355.426405-1-dolinux.peng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 717d6313bba1b3179f0bf1026aaec6b7e26f484e ]
This reverts [1] and changes return value for bpf_session_cookie
in bpf selftests. Having long * might lead to problems on 32-bit
architectures.
Fixes: 2b8dd87332cd ("bpf: Make bpf_session_cookie() kfunc return long *")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240619081624.1620152-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75d8d7a63065b18df9555dbaab0b42d4c6f20943 ]
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de1b5ea789dc28066cc8dc634b6825bd6148f38b ]
The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's
necessary to check if it is positive before accumulating it to bytes_recvd.
Fixes: 16962b2404ac ("bpf: sockmap, add selftests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 531876c80004ecff7bfdbd8ba6c6b48835ef5e22 ]
Make sure to preserve and/or enforce FD_CLOEXEC flag on duped FDs.
Use dup3() with O_CLOEXEC flag for that.
Without this fix libbpf effectively clears FD_CLOEXEC flag on each of BPF
map/prog FD, which is definitely not the right or expected behavior.
Reported-by: Lennart Poettering <lennart@poettering.net>
Fixes: bc308d011ab8 ("libbpf: call dup2() syscall directly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529223239.504241-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c8d7598dfed759bf1d9d0322b4c2b42eb7252d8 ]
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4aba3471cfb9ccf69b476463f19b4c50fef6b14 ]
LLVM 17 started treating const structs as constants:
* https://github.com/llvm/llvm-project/commit/0b2d5b967d98
Combined with pointer laundering via ptr_to_u64, which takes a const ptr,
but in reality treats the underlying memory as mutable, this makes clang
always pass zero to btf__type_by_id, which breaks full name resolution.
Disassembly before (LLVM 16) and after (LLVM 17):
- 8b 75 cc mov -0x34(%rbp),%esi
- e8 47 8d 02 00 call 3f5b0 <btf__type_by_id>
+ 31 f6 xor %esi,%esi
+ e8 a9 8c 02 00 call 3f510 <btf__type_by_id>
It's a bigger project to fix this properly (and a question whether LLVM
itself should detect this), but for right now let's just fix bpftool.
For more information, see this thread in bpf mailing list:
* https://lore.kernel.org/bpf/CABWYdi0ymezpYsQsPv7qzpx2fWuTkoD1-wG1eT-9x-TSREFrQg@mail.gmail.com/T/
Fixes: b662000aff84 ("bpftool: Adding support for BTF program names")
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240520225149.5517-1-ivan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
