summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2026-03-04selftests/mm/charge_reserved_hugetlb: drop mount size for hugetlbfsLi Wang1-2/+2
[ Upstream commit 1aa1dd9cc595917882fb6db67725442956f79607 ] charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a fixed size of 256M. On systems with large base hugepages (e.g. 512MB), this is smaller than a single hugepage, so the hugetlbfs mount ends up with zero capacity (often visible as size=0 in mount output). As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang waiting for progress. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... # mount |grep /mnt/huge none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0) # grep -i huge /proc/meminfo ... HugePages_Total: 10 HugePages_Free: 10 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 524288 kB Hugetlb: 5242880 kB Drop the mount args with 'size=256M', so the filesystem capacity is sufficient regardless of HugeTLB page size. Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04tools/power cpupower: Reset errno before strtoull()Kaushlendra Kumar1-0/+1
[ Upstream commit f9bd3762cf1bd0c2465f2e6121b340883471d1bf ] cpuidle_state_get_one_value() never cleared errno before calling strtoull(), so a prior ERANGE caused every cpuidle counter read to return zero. Reset errno to 0 before the conversion so each sysfs read is evaluated independently. Link: https://lore.kernel.org/r/20251201121745.3776703-1-kaushlendra.kumar@intel.com Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04libperf build: Always place libperf includes firstIan Rogers1-1/+1
[ Upstream commit 8c5b40678c63be6b85f1c2dc8c8b89d632faf988 ] When building tools/perf the CFLAGS can contain a directory for the installed headers. As the headers may be being installed while building libperf.a this can cause headers to be partially installed and found in the include path while building an object file for libperf.a. The installed header may reference other installed headers that are missing given the partial nature of the install and then the build fails with a missing header file. Avoid this by ensuring the libperf source headers are always first in the CFLAGS. Fixes: 3143504918105156 ("libperf: Make libperf.a part of the perf build") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04libperf: Don't remove -g when EXTRA_CFLAGS are usedJames Clark1-9/+3
[ Upstream commit f5b07010c13c77541e8ade167d05bef3b8a63739 ] When using EXTRA_CFLAGS, for example "EXTRA_CFLAGS=-DREFCNT_CHECKING=1", this construct stops setting -g which you'd expect would not be affected by adding extra flags. Additionally, EXTRA_CFLAGS should be the last thing to be appended so that it can be used to undo any defaults. And no condition is required, just += appends to any existing CFLAGS and also appends or doesn't append EXTRA_CFLAGS if they are or aren't set. It's not clear why DEBUG=1 is required for -g in Perf when in libperf it's always on, but I don't think we need to change that behavior now because someone may be depending on it. Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250319114009.417865-1-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Stable-dep-of: 8c5b40678c63 ("libperf build: Always place libperf includes first") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04perf callchain: Fix srcline printing with inlinesIan Rogers1-2/+6
[ Upstream commit abec464767b5d26f0612250d511c18f420826ca1 ] sample__fprintf_callchain() was using map__fprintf_srcline() which won't report inline line numbers. Fix by using the srcline from the callchain and falling back to the map variant. Fixes: 25da4fab5f66e659 ("perf evsel: Move fprintf methods to separate source file") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Tony Jones <tonyj@suse.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04bpftool: Fix truncated netlink dumpsJakub Kicinski2-2/+7
[ Upstream commit 3b39d73cc3379360a33eb583b17f21fe55e1288e ] Netlink requires that the recv buffer used during dumps is at least min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will get truncated. Make sure bpftool follows this requirement, avoid missing information on systems with large pages. Acked-by: Quentin Monnet <qmo@kernel.org> Fixes: 7084566a236f ("tools/bpftool: Remove libbpf_internal.h usage in bpftool") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20260217194150.734701-1-kuba@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: forwarding: vxlan_bridge_1d_ipv6: fix test failure with ↵Aleksei Oladko1-1/+1
br_netfilter enabled [ Upstream commit ce9f6aec0fb780dafc1dfc5f47c688422aff464a ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv6 packet has an incorrect payload length set in the IPv6 header. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by setting the correct IPv6 payload length for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh lines 698-706 )"00:03:"$( : Payload length )"3a:"$( : Next header )"04:"$( : Hop limit )"$saddr:"$( : IP saddr )"$daddr:"$( : IP daddr )"80:"$( : ICMPv6.type )"00:"$( : ICMPv6.code )"00:"$( : ICMPv6.checksum ) Data after IPv6 header: • 80: — 1 byte (ICMPv6 type) • 00: — 1 byte (ICMPv6 code) • 00: — 1 byte (ICMPv6 checksum, truncated) Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match the actual payload size. Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter ↵Aleksei Oladko1-10/+16
enabled [ Upstream commit 02cb2e6bacbb08ebf6acb61be816efd11e1f4a21 ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv4 packet contains a zero IP header checksum. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by calculating and setting a valid IPv4 header checksum for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. Fixed by using the payload_template_calc_checksum() / payload_template_expand_checksum() helpers that are only available in v6.3 and newer kernels. Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2Ido Schimmel1-2/+2
[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04spi: tools: Add include folder to .gitignoreFrancesco Lavra1-0/+1
[ Upstream commit 5af56f30c4fcbade4a92f94dadfea517d1db9703 ] The Makefile for the SPI tools creates an include/linux/spi folder and some symlinks inside it. After running `make -C spi/tools`, this folder shows up as untracked in the git status. Add the above folder to the .gitignore file. Fixes: f325b73dc4db ("spi: tools: move to tools buildsystem") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Link: https://patch.msgid.link/20260209095001.556495-1-flavra@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04libbpf: Fix OOB read in btf_dump_get_bitfield_valueVarun R Mallya1-0/+9
[ Upstream commit 5714ca8cba5ed736f3733663c446cbee63a10a64 ] When dumping bitfield data, btf_dump_get_bitfield_value() reads data based on the underlying type's size (t->size). However, it does not verify that the provided data buffer (data_sz) is large enough to contain these bytes. If btf_dump__dump_type_data() is called with a buffer smaller than the type's size, this leads to an out-of-bounds read. This was confirmed by AddressSanitizer in the linked issue. Fix this by ensuring we do not read past the provided data_sz limit. Fixes: a1d3cc3c5eca ("libbpf: Avoid use of __int128 in typed dump display") Reported-by: Harrison Green <harrisonmichaelgreen@gmail.com> Suggested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Varun R Mallya <varunrmallya@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260106233527.163487-1-varunrmallya@gmail.com Closes: https://github.com/libbpf/libbpf/issues/928 Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/bpf: veristat: fix printing order in output_stats()Puranjay Mohan1-1/+1
[ Upstream commit c286e7e9d1f1f3d90ad11c37e896f582b02d19c4 ] The order of the variables in the printf() doesn't match the text and therefore veristat prints something like this: Done. Processed 24 files, 0 programs. Skipped 62 files, 0 programs. When it should print: Done. Processed 24 files, 62 programs. Skipped 0 files, 0 programs. Fix the order of variables in the printf() call. Fixes: 518fee8bfaf2 ("selftests/bpf: make veristat skip non-BPF and failing-to-open BPF objects") Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20251231221052.759396-1-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-19selftests: mptcp: join: fix local endp not being trackedMatthieu Baerts (NGI0)1-5/+4
commit c5d5ecf21fdd9ce91e6116feb3aa83cee73352cc upstream. When running this mptcp_join.sh selftest on older kernel versions not supporting local endpoints tracking, this test fails because 3 MP_JOIN ACKs have been received, while only 2 were expected. It is not clear why only 2 MP_JOIN ACKs were expected on old kernel versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is expected in the selftests included in this kernel version, see commit f4480eaad489 ("selftests: mptcp: add missing join check"). Switch the expected MP_JOIN ACKs to 3. While at it, move this chk_join_nr helper out of the special condition for older kernel versions as it is now the same as with more recent ones. Also, invert the condition to be more logical: what's expected on newer kernel versions having such helper first. Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mptcp_join.sh, because commit e571fb09c893 ("selftests: mptcp: add speed env var") is not in this version, and caused conflicts in the context. The same modification can still be applied at the same place. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19selftests: mptcp: check subflow errors in close eventsMatthieu Baerts (NGI0)1-3/+22
commit 2ef9e3a3845d0a20b62b01f5b731debd0364688d upstream. This validates the previous commit: subflow closed events should contain an error field when a subflow got closed with an error, e.g. reset or timeout. For this test, the chk_evt_nr helper has been extended to check attributes in the matched events. In this test, the 2 subflow closed events should have an error. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mptcp_join.sh, because in this version, commit 20ccc7c5f7a3 ("selftests: mptcp: join: validate event numbers") has been backported with adaptations to display results correctly, see commit 5dc9170eee96 ("selftests: mptcp: join: validate event numbers") for more details. The same type of adaptations had to be made here as well. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19selftests: mptcp: check no dup close events after errorMatthieu Baerts (NGI0)1-0/+79
commit 8467458dfa61b37e259e3485a5d3e415d08193c1 upstream. This validates the previous commit: subflow closed events are re-sent with less info when the initial subflow is disconnected after an error and each time a subflow is closed after that. In this new test, the userspace PM is involved because that's how it was discovered, but it is not specific to it. The initial subflow is terminated with a RESET, and that will cause the subflow disconnect. Then, a new subflow is initiated, but also got rejected, which cause a second subflow closed event, but not a third one. While at it, in case of failure to get the expected amount of events, the events are printed. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mptcp_join.sh, because in this version, commit 20ccc7c5f7a3 ("selftests: mptcp: join: validate event numbers") has been backported with adaptations to display results correctly, see commit 5dc9170eee96 ("selftests: mptcp: join: validate event numbers") for more details. The same type of adaptations had to be made here as well, plus importing a few additional helpers: userspace_pm_add_sf, evts_get_info and get_info_value. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19selftests: mptcp: pm: ensure unknown flags are ignoredMatthieu Baerts (NGI0)2-0/+15
commit 29f4801e9c8dfd12bdcb33b61a6ac479c7162bd7 upstream. This validates the previous commit: the userspace can set unknown flags -- the 7th bit is currently unused -- without errors, but only the supported ones are printed in the endpoints dumps. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in pm_netlink.sh, because some refactoring have been done later on: commit 0d16ed0c2e74 ("selftests: mptcp: add {get,format}_endpoint(s) helpers") and commit c99d57d0007a ("selftests: mptcp: use pm_nl endpoint ops") are not in this version. The same operation can still be done at the same place, without using the new helpers. Also, commit 1dc88d241f92 ("selftests: mptcp: pm_nl_ctl: always look for errors") is not in this version, and create a conflict in the context which is not related to the modification here. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-11KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failuresZhiquan Li1-0/+1
[ Upstream commit e396a74222654486d6ab45dca5d0c54c408b8b91 ] Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is automatically enabled at -O1 or above. This results in some fortified version of definitions of standard library functions are included. While linker resolves the symbols, the fortified versions might override the definitions in lib/string_override.c and reference to those PLT entries in GLIBC. This is not a problem for the code in host, but it is a disaster for the guest code. E.g., if build and run x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to memset() reference to __memset_chk@plt. The option -fno-builtin-memset is not helpful here, because those fortified versions are not built-in but some definitions which are included by header, they are for different intentions. In order to eliminate the unpredictable behaviors may vary depending on the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to prevent from introducing the fortified definitions. Signed-off-by: Zhiquan Li <zhiquan_li@163.com> Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use") Cc: stable@vger.kernel.org [sean: tag for stable] Signed-off-by: Sean Christopherson <seanjc@google.com> [ Makefile.kvm -> Makefile ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: net: amt: wait longer for connection before sending packetsTaehee Yoo1-2/+5
[ Upstream commit 04708606fd7bdc34b69089a4ff848ff36d7088f9 ] Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel connection between the gateway and the relay, and for the listener socket to be created in the LISTENER namespace. However, tests sometimes fail because packets are sent before the connection is fully established. Increase the waiting time to make the tests more reliable, and use wait_local_port_listen() to explicitly wait for the listener socket. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06testptp: Add option to open PHC in readonly modeWojtek Wasko1-14/+23
[ Upstream commit 76868642e42795353106197abf9c607ad80f4c9e ] PTP Hardware Clocks no longer require WRITE permission to perform readonly operations, such as listing device capabilities or listening to EXTTS events once they have been enabled by a process with WRITE permissions. Add '-r' option to testptp to open the PHC in readonly mode instead of the default read-write mode. Skip enabling EXTTS if readonly mode is requested. Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Wojtek Wasko <wwasko@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftest/ptp: update ptp selftest to exercise the gettimex optionsMahesh Bandewar1-5/+57
[ Upstream commit 3d07b691ee707c00afaf365440975e81bb96cd9b ] With the inclusion of commit c259acab839e ("ptp/ioctl: support MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime() now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW timebases along with the previously supported CLOCK_REALTIME. This patch adds a command line option 'y' to the testptp program to choose one of the allowed timebases [realtime aka system, monotonic, and monotonic-raw). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Shuah Khan <shuah@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06ptp: add testptp mask testXabier Marquiegui1-1/+18
[ Upstream commit 26285e689c6cd2cf3849568c83b2ebe53f467143 ] Add option to test timestamp event queue mask manipulation in testptp. Option -F allows the user to specify a single channel that will be applied on the mask filter via IOCTL. The test program will maintain the file open until user input is received. This allows checking the effect of the IOCTL in debugfs. eg: Console 1: ``` Channel 12 exclusively enabled. Check on debugfs. Press any key to continue ``` Console 2: ``` 0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 ``` Signed-off-by: Xabier Marquiegui <reibax@gmail.com> Suggested-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests/ptp: Add -X option for testing PTP_SYS_OFFSET_PRECISEAlex Maftei1-1/+30
[ Upstream commit 3cf119ad5dc2b5c11385106d6d0ba86fbb47324c ] The -X option was chosen because X looks like a cross, and the underlying callback is 'get cross timestamp'. Signed-off-by: Alex Maftei <alex.maftei@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests/ptp: Add -x option for testing PTP_SYS_OFFSET_EXTENDEDAlex Maftei1-2/+42
[ Upstream commit c8ba75c4eb846888f8f2730690b99cb5bf7b337c ] The -x option (where 'x' stands for eXtended) takes an argument which represents the number of samples to request from the PTP device. The help message will display the maximum number of samples allowed. Providing an invalid argument will also display the maximum number of samples allowed. Signed-off-by: Alex Maftei <alex.maftei@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06testptp: Add support for testing ptp_clock_info .adjphase callbackRahul Rameshbabu1-1/+18
[ Upstream commit 3a9a9a6139286584d1199f555fa4f96f592a3217 ] Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp is invoked with a phase adjustment offset value. Support seconds and nanoseconds for the offset value. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests: drv-net: fix RPS mask handling for high CPU numbersGal Pressman1-2/+2
[ Upstream commit cf055f8c000445aa688c53a706ef4f580818eedb ] The RPS bitmask bounds check uses ~(RPS_MAX_CPUS - 1) which equals ~15 = 0xfff0, only allowing CPUs 0-3. Change the mask to ~((1UL << RPS_MAX_CPUS) - 1) = ~0xffff to allow CPUs 0-15. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260112173715.384843-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06vsock/test: add a final full barrier after run all testsStefano Garzarella1-0/+12
[ Upstream commit c39a6a277e0e67ffff6a8efcbbf7e7e23ce9e38c ] If the last test fails, the other side still completes correctly, which could lead to false positives. Let's add a final barrier that ensures that the last test has finished correctly on both sides, but also that the two sides agree on the number of tests to be performed. Fixes: 2f65b44e199c ("VSOCK: add full barrier between test cases") Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-17bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUNAmery Hung1-3/+1
[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ] To test bpf_xdp_pull_data(), an xdp packet containing fragments as well as free linear data area after xdp->data_end needs to be created. However, bpf_prog_test_run_xdp() always fills the linear area with data_in before creating fragments, leaving no space to pull data. This patch will allow users to specify the linear data size through ctx->data_end. Currently, ctx_in->data_end must match data_size_in and will not be the final ctx->data_end seen by xdp programs. This is because ctx->data_end is populated according to the xdp_buff passed to test_run. The linear data area available in an xdp_buff, max_linear_sz, is alawys filled up before copying data_in into fragments. This patch will allow users to specify the size of data that goes into the linear area. When ctx_in->data_end is different from data_size_in, only ctx_in->data_end bytes of data will be put into the linear area when creating the xdp_buff. While ctx_in->data_end will be allowed to be different from data_size_in, it cannot be larger than the data_size_in as there will be no data to copy from user space. If it is larger than the maximum linear data area size, the layout suggested by the user will not be honored. Data beyond max_linear_sz bytes will still be copied into fragments. Finally, since it is possible for a NIC to produce a xdp_buff with empty linear data area, allow it when calling bpf_test_init() from bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such xdp_buff. This is done by moving lower-bound check to callers as most of them already do except bpf_prog_test_run_skb(). The change also fixes a bug that allows passing an xdp_buff with data < ETH_HLEN. This can happen when ctx is used and metadata is at least ETH_HLEN. Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-17bpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4KYonghong Song2-8/+96
[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ] The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on arm64 with 64KB page: xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on when constructing frags, with 64K page size, the frag data_len could be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail(). To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel can test different page size properly. With the kernel change, the user space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default value is 17, so for 4K page, the maximum packet size will be less than 68K. To test 64K page, a bigger maximum packet size than 68K is desired. So two different functions are implemented for subtest xdp_adjust_frags_tail_grow. Depending on different page size, different data input/output sizes are used to adapt with different page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11idr: fix idr_alloc() returning an ID out of rangeMatthew Wilcox (Oracle)1-0/+21
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream. If you use an IDR with a non-zero base, and specify a range that lies entirely below the base, 'max - base' becomes very large and idr_get_free() can return an ID that lies outside of the requested range. Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Jan Sokolowski <jan.sokolowski@intel.com> Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-11selftests/ftrace: traceonoff_triggers: strip off namesYipeng Zou1-2/+3
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ] The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11selftests: net: fix "buffer overflow detected" for tap.cAlice C. Munduruca1-11/+5
[ Upstream commit 472c5dd6b95c02b3e5d7395acf542150e91165e7 ] When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3', the strcpy() in rtattr_add_strsz() is replaced with a checked version which causes the test to consistently fail when compiled with toolchains for which this option is enabled by default. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN tap.test_packet_valid_udp_gso ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_gso: Test terminated by assertion # FAIL tap.test_packet_valid_udp_gso not ok 1 tap.test_packet_valid_udp_gso # RUN tap.test_packet_valid_udp_csum ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_csum: Test terminated by assertion # FAIL tap.test_packet_valid_udp_csum not ok 2 tap.test_packet_valid_udp_csum # RUN tap.test_packet_crash_tap_invalid_eth_proto ... *** buffer overflow detected ***: terminated # test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion # FAIL tap.test_packet_crash_tap_invalid_eth_proto not ok 3 tap.test_packet_crash_tap_invalid_eth_proto # FAILED: 0 / 3 tests passed. # Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 A buffer overflow is detected by the fortified glibc __strcpy_chk() since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly reported as 1, even though there is ample space in its bounding buffer `req`. Additionally, given that IFLA_IFNAME also expects a null-terminated string, callers of rtaddr_add_str{,sz}() could simply use the rtaddr_add_strsz() variant. (which has been renamed to remove the trailing `sz`) memset() has been used for this function since it is unchecked and thus circumvents the issue discussed in the previous paragraph. Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver") Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com> Reviewed-by: Cengiz Can <cengiz.can@canonical.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11tools/testing/nvdimm: Use per-DIMM device handleAlison Schofield1-1/+6
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream. KASAN reports a global-out-of-bounds access when running these nfit tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh, daxdev-errors.sh, and inject-error.sh. [] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test] [] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215 [] The buggy address belongs to the variable: [] handle+0x1c/0x1df4 [nfit_test] nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device handle and triggers a KASAN error when it reads past the end of the handle array. It should not be indexing the handle array at all. The correct device handle is stored in per-DIMM test data. Each DIMM has a struct nfit_mem that embeds a struct acpi_nfit_memdev that describes the NFIT device handle. Use that device handle here. Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA") Cc: stable@vger.kernel.org Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>> --- Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-11ktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt1-2/+2
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream. The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-11perf tools: Fix split kallsyms DSO countingNamhyung Kim1-2/+2
[ Upstream commit ad0b9c4865b98dc37f4d606d26b1c19808796805 ] It's counted twice as it's increased after calling maps__insert(). I guess we want to increase it only after it's added properly. Reviewed-by: Ian Rogers <irogers@google.com> Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11selftests/bpf: Improve reliability of test_perf_branches_no_hw()Matt Bobrowski2-2/+17
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ] Currently, test_perf_branches_no_hw() relies on the busy loop within test_perf_branches_common() being slow enough to allow at least one perf event sample tick to occur before starting to tear down the backing perf event BPF program. With a relatively small fixed iteration count of 1,000,000, this is not guaranteed on modern fast CPUs, resulting in the test run to subsequently fail with the following: bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:PASS:output not valid 0 nsec check_good_sample:PASS:read_branches_size 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_size 0 nsec test_perf_branches_no_hw:PASS:perf_event_open 0 nsec test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_bad_sample:FAIL:output not valid no valid sample from prog Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1 million increments of a volatile integer can take significantly less than 1 millisecond. If the spin loop and detachment of the perf event BPF program elapses before the first 1 ms sampling interval elapses, the perf event will never end up firing. Fix this by bumping the loop iteration counter a little within test_perf_branches_common(), along with ensuring adding another loop termination condition which is directly influenced by the backing perf event BPF program executing. Notably, a concious decision was made to not adjust the sample_freq value as that is just not a reliable way to go about fixing the problem. It effectively still leaves the race window open. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11selftests/bpf: skip test_perf_branches_hw() on unsupported platformsMatt Bobrowski1-3/+3
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ] Gracefully skip the test_perf_branches_hw subtest on platforms that do not support LBR or require specialized perf event attributes to enable branch sampling. For example, AMD's Milan (Zen 3) supports BRS rather than traditional LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW, attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the generic setup used within this test. Notably, it also probably doesn't hold much value to special case perf event configurations for selected micro architectures. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11selftests/bpf: Fix failure paths in send_signal testAlexei Starovoitov1-0/+5
[ Upstream commit c13339039891dbdfa6c1972f0483bd07f610b776 ] When test_send_signal_kern__open_and_load() fails parent closes the pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child continues and enters infinite loop, while parent is stuck in wait(NULL). Other error paths have similar issue, so kill the child before waiting on it. The bug was discovered while compiling all of selftests with -O1 instead of -O2 which caused progs/test_send_signal_kern.c to fail to load. Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11perf record: skip synthesize event when open evsel failedShuai Xue1-1/+1
[ Upstream commit 163e5f2b96632b7fb2eaa965562aca0dbdf9f996 ] When using perf record with the `--overwrite` option, a segmentation fault occurs if an event fails to open. For example: perf record -e cycles-ct -F 1000 -a --overwrite Error: cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' perf: Segmentation fault #0 0x6466b6 in dump_stack debug.c:366 #1 0x646729 in sighandler_dump_stack debug.c:378 #2 0x453fd1 in sigsegv_handler builtin-record.c:722 #3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090] #4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862 #5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943 #6 0x458090 in record__synthesize builtin-record.c:2075 #7 0x45a85a in __cmd_record builtin-record.c:2888 #8 0x45deb6 in cmd_record builtin-record.c:4374 #9 0x4e5e33 in run_builtin perf.c:349 #10 0x4e60bf in handle_internal_command perf.c:401 #11 0x4e6215 in run_argv perf.c:448 #12 0x4e653a in main perf.c:555 #13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72] #14 0x43a3ee in _start ??:0 The --overwrite option implies --tail-synthesize, which collects non-sample events reflecting the system status when recording finishes. However, when evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist is not initialized and remains NULL. The code unconditionally calls record__synthesize() in the error path, which iterates through the NULL evlist pointer and causes a segfault. To fix it, move the record__synthesize() call inside the error check block, so it's only called when there was no error during recording, ensuring that evlist is properly initialized. Fixes: 4ea648aec019 ("perf record: Add --tail-synthesize option") Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11tools/nolibc/stdio: let perror work when NOLIBC_IGNORE_ERRNO is setBenjamin Berg1-0/+4
[ Upstream commit c485ca3aff2442adea4c08ceb5183e671ebed22a ] There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such, simply print the message with "unknown error" rather than the integer value of errno. Fixes: acab7bcdb1bc ("tools/nolibc/stdio: add perror() to report the errno value") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11objtool: Fix weak symbol detectionJosh Poimboeuf1-4/+4
[ Upstream commit 72567c630d32bc31f671977f78228c80937ed80e ] find_symbol_hole_containing() fails to find a symbol hole (aka stripped weak symbol) if its section has no symbols before the hole. This breaks weak symbol detection if -ffunction-sections is enabled. Fix that by allowing the interval tree to contain section symbols, which are always at offset zero for a given section. Fixes a bunch of (-ffunction-sections) warnings like: vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction Fixes: 4adb23686795 ("objtool: Ignore extra-symbol code") Acked-by: Petr Mladek <pmladek@suse.com> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11objtool: Fix find_{symbol,func}_containing()Peter Zijlstra3-54/+229
[ Upstream commit 5da6aea375cde499fdfac3cde4f26df4a840eb9f ] The current find_{symbol,func}_containing() functions are broken in the face of overlapping symbols, exactly the case that is needed for a new ibt/endbr supression. Import interval_tree_generic.h into the tools tree and convert the symbol tree to an interval tree to support proper range stabs. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220915111146.330203761@infradead.org Stable-dep-of: 72567c630d32 ("objtool: Fix weak symbol detection") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: mptcp: join: endpoints: longer transferMatthieu Baerts (NGI0)1-4/+4
[ Upstream commit 6457595db9870298ee30b6d75287b8548e33fe19 ] In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all endpoints tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ removed curly braces and stderr redirection ] Signed-off-by: Sasha Levin <sashal@kernel.org> [ Conflicts in mptcp_join.sh because commit 0c93af1f8907 ("selftests: mptcp: drop test_linkfail parameter") is not in this version. It moved the 4th parameter to an env var. To fix the conflicts, the new value simply needs to be added as the 4th argument instead of an env var. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: connect: fix fallback note due to OoOMatthieu Baerts (NGI0)1-1/+1
[ Upstream commit 63c643aa7b7287fdbb0167063785f89ece3f000f ] The "fallback due to TCP OoO" was never printed because the stat_ooo_now variable was checked twice: once in the parent if-statement, and one in the child one. The second condition was then always true then, and the 'else' branch was never taken. The idea is that when there are more ACK + MP_CAPABLE than expected, the test either fails if there was no out of order packets, or a notice is printed. Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Different operators used ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: join: rm: set backup flagMatthieu Baerts (NGI0)1-27/+27
[ Upstream commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 ] Some of these 'remove' tests rarely fail because a subflow has been reset instead of cleanly removed. This can happen when one extra subflow which has never carried data is being closed (FIN) on one side, while the other is sending data for the first time. To avoid such subflows to be used right at the end, the backup flag has been added. With that, data will be only carried on the initial subflow. Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07tracing/tools: Fix incorrcet short option in usage text for --threadsZhang Chujun1-1/+1
[ Upstream commit 53afec2c8fb2a562222948cb1c2aac48598578c9 ] The help message incorrectly listed '-t' as the short option for --threads, but the actual getopt_long configuration uses '-e'. This mismatch can confuse users and lead to incorrect command-line usage. This patch updates the usage string to correctly show: "-e, --threads NRTHR" to match the implementation. Note: checkpatch.pl reports a false-positive spelling warning on 'Run', which is intentional. Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: net: use BASH for bareudp testingPo-Hsu Lin1-1/+1
[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ] In bareudp.sh, this script uses /bin/sh and it will load another lib.sh BASH script at the very beginning. But on some operating systems like Ubuntu, /bin/sh is actually pointed to DASH, thus it will try to run BASH commands with DASH and consequently leads to syntax issues: # ./bareudp.sh: 4: ./lib.sh: Bad substitution # ./bareudp.sh: 5: ./lib.sh: source: not found # ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected Fix this by explicitly using BASH for bareudp.sh. This fixes test execution failures on systems where /bin/sh is not BASH. Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com> Link: https://bugs.launchpad.net/bugs/2129812 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and ↵Arnd Bergmann2-0/+38
loongarch" commit 6e8d96909a23c8078ee965bd48bb31cbef2de943 upstream. Unifying the asm-generic headers across 32-bit and 64-bit architectures based on the compiler provided macros was a good idea and appears to work with all user space, but it caused a regression when building old kernels on systems that have the new headers installed in /usr/include, as this combination trips an inconsistency in the kernel's own tools/include headers that are a mix of userspace and kernel-internal headers. This affects kernel builds on arm64, riscv64 and loongarch64 systems that might end up using the "#define __BITS_PER_LONG 32" default from the old tools headers. Backporting the commit into stable kernels would address this, but it would still break building kernels without that backport, and waste time for developers trying to understand the problem. arm64 build machines are rather common, and on riscv64 this can also happen in practice, but loongarch64 is probably new enough to not be used much for building old kernels, so only revert the bits for arm64 and riscv. Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/ Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: connect: trunc: read all recv dataMatthieu Baerts (NGI0)1-5/+13
commit ee79980f7a428ec299f6261bea4c1084dcbc9631 upstream. MPTCP Join "fastclose server" selftest is sometimes failing because the client output file doesn't have the expected size, e.g. 296B instead of 1024B. When looking at a packet trace when this happens, the server sent the expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE. It is then strange to see the client only receiving 296B, which would mean it only got a part of the second packet. The problem is then not on the networking side, but rather on the data reception side. When mptcp_connect is launched with '-f -1', it means the connection might stop before having sent everything, because a reset has been received. When this happens, the program was directly stopped. But it is also possible there are still some data to read, simply because the previous 'read' step was done with a buffer smaller than the pending data, see do_rnd_read(). In this case, it is important to read what's left in the kernel buffers before stopping without error like before. SIGPIPE is now ignored, not to quit the app before having read everything. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarchTiezhu Yang4-45/+13
[ Upstream commit 8386f58f8deda81110283798a387fb53ec21957c ] Now we specify the minimal version of GCC as 5.1 and Clang/LLVM as 11.0.0 in Documentation/process/changes.rst, __CHAR_BIT__ and __SIZEOF_LONG__ are usable, it is probably fine to unify the definition of __BITS_PER_LONG as (__CHAR_BIT__ * __SIZEOF_LONG__) in asm-generic uapi bitsperlong.h. In order to keep safe and avoid regression, only unify uapi bitsperlong.h for some archs such as arm64, riscv and loongarch which are using newer toolchains that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__. Suggested-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/all/d3e255e4746de44c9903c4433616d44ffcf18d1b.camel@xry111.site/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-arch/a3a4f48a-07d4-4ed9-bc53-5d383428bdd2@app.fastmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: net: local_termination: Wait for interfaces to come upAlexander Sverdlin1-0/+2
[ Upstream commit 57531b3416448d1ced36a2a974a4085ec43d57b0 ] It seems that most of the tests prepare the interfaces once before the test run (setup_prepare()), rely on setup_wait() to wait for link and only then run the test(s). local_termination brings the physical interfaces down and up during test run but never wait for them to come up. If the auto-negotiation takes some seconds, first test packets are being lost, which leads to false-negative test results. Use setup_wait() in run_test() to make sure auto-negotiation has been completed after all simple_if_init() calls on physical interfaces and test packets will not be lost because of the race against link establishment. Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-03-26 19:50:10 +0300