summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2 daysbpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUNAmery Hung1-3/+1
[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ] To test bpf_xdp_pull_data(), an xdp packet containing fragments as well as free linear data area after xdp->data_end needs to be created. However, bpf_prog_test_run_xdp() always fills the linear area with data_in before creating fragments, leaving no space to pull data. This patch will allow users to specify the linear data size through ctx->data_end. Currently, ctx_in->data_end must match data_size_in and will not be the final ctx->data_end seen by xdp programs. This is because ctx->data_end is populated according to the xdp_buff passed to test_run. The linear data area available in an xdp_buff, max_linear_sz, is alawys filled up before copying data_in into fragments. This patch will allow users to specify the size of data that goes into the linear area. When ctx_in->data_end is different from data_size_in, only ctx_in->data_end bytes of data will be put into the linear area when creating the xdp_buff. While ctx_in->data_end will be allowed to be different from data_size_in, it cannot be larger than the data_size_in as there will be no data to copy from user space. If it is larger than the maximum linear data area size, the layout suggested by the user will not be honored. Data beyond max_linear_sz bytes will still be copied into fragments. Finally, since it is possible for a NIC to produce a xdp_buff with empty linear data area, allow it when calling bpf_test_init() from bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such xdp_buff. This is done by moving lower-bound check to callers as most of them already do except bpf_prog_test_run_skb(). The change also fixes a bug that allows passing an xdp_buff with data < ETH_HLEN. This can happen when ctx is used and metadata is at least ETH_HLEN. Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysbpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4KYonghong Song2-8/+96
[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ] The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on arm64 with 64KB page: xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on when constructing frags, with 64K page size, the frag data_len could be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail(). To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel can test different page size properly. With the kernel change, the user space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default value is 17, so for 4K page, the maximum packet size will be less than 68K. To test 64K page, a bigger maximum packet size than 68K is desired. So two different functions are implemented for subtest xdp_adjust_frags_tail_grow. Depending on different page size, different data input/output sizes are used to adapt with different page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysidr: fix idr_alloc() returning an ID out of rangeMatthew Wilcox (Oracle)1-0/+21
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream. If you use an IDR with a non-zero base, and specify a range that lies entirely below the base, 'max - base' becomes very large and idr_get_free() can return an ID that lies outside of the requested range. Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Jan Sokolowski <jan.sokolowski@intel.com> Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 daysselftests/ftrace: traceonoff_triggers: strip off namesYipeng Zou1-2/+3
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ] The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysselftests: net: fix "buffer overflow detected" for tap.cAlice C. Munduruca1-11/+5
[ Upstream commit 472c5dd6b95c02b3e5d7395acf542150e91165e7 ] When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3', the strcpy() in rtattr_add_strsz() is replaced with a checked version which causes the test to consistently fail when compiled with toolchains for which this option is enabled by default. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN tap.test_packet_valid_udp_gso ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_gso: Test terminated by assertion # FAIL tap.test_packet_valid_udp_gso not ok 1 tap.test_packet_valid_udp_gso # RUN tap.test_packet_valid_udp_csum ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_csum: Test terminated by assertion # FAIL tap.test_packet_valid_udp_csum not ok 2 tap.test_packet_valid_udp_csum # RUN tap.test_packet_crash_tap_invalid_eth_proto ... *** buffer overflow detected ***: terminated # test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion # FAIL tap.test_packet_crash_tap_invalid_eth_proto not ok 3 tap.test_packet_crash_tap_invalid_eth_proto # FAILED: 0 / 3 tests passed. # Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 A buffer overflow is detected by the fortified glibc __strcpy_chk() since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly reported as 1, even though there is ample space in its bounding buffer `req`. Additionally, given that IFLA_IFNAME also expects a null-terminated string, callers of rtaddr_add_str{,sz}() could simply use the rtaddr_add_strsz() variant. (which has been renamed to remove the trailing `sz`) memset() has been used for this function since it is unchecked and thus circumvents the issue discussed in the previous paragraph. Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver") Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com> Reviewed-by: Cengiz Can <cengiz.can@canonical.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daystools/testing/nvdimm: Use per-DIMM device handleAlison Schofield1-1/+6
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream. KASAN reports a global-out-of-bounds access when running these nfit tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh, daxdev-errors.sh, and inject-error.sh. [] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test] [] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215 [] The buggy address belongs to the variable: [] handle+0x1c/0x1df4 [nfit_test] nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device handle and triggers a KASAN error when it reads past the end of the handle array. It should not be indexing the handle array at all. The correct device handle is stored in per-DIMM test data. Each DIMM has a struct nfit_mem that embeds a struct acpi_nfit_memdev that describes the NFIT device handle. Use that device handle here. Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA") Cc: stable@vger.kernel.org Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>> --- Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 daysktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt1-2/+2
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream. The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 daysperf tools: Fix split kallsyms DSO countingNamhyung Kim1-2/+2
[ Upstream commit ad0b9c4865b98dc37f4d606d26b1c19808796805 ] It's counted twice as it's increased after calling maps__insert(). I guess we want to increase it only after it's added properly. Reviewed-by: Ian Rogers <irogers@google.com> Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysselftests/bpf: Improve reliability of test_perf_branches_no_hw()Matt Bobrowski2-2/+17
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ] Currently, test_perf_branches_no_hw() relies on the busy loop within test_perf_branches_common() being slow enough to allow at least one perf event sample tick to occur before starting to tear down the backing perf event BPF program. With a relatively small fixed iteration count of 1,000,000, this is not guaranteed on modern fast CPUs, resulting in the test run to subsequently fail with the following: bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:PASS:output not valid 0 nsec check_good_sample:PASS:read_branches_size 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_size 0 nsec test_perf_branches_no_hw:PASS:perf_event_open 0 nsec test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_bad_sample:FAIL:output not valid no valid sample from prog Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1 million increments of a volatile integer can take significantly less than 1 millisecond. If the spin loop and detachment of the perf event BPF program elapses before the first 1 ms sampling interval elapses, the perf event will never end up firing. Fix this by bumping the loop iteration counter a little within test_perf_branches_common(), along with ensuring adding another loop termination condition which is directly influenced by the backing perf event BPF program executing. Notably, a concious decision was made to not adjust the sample_freq value as that is just not a reliable way to go about fixing the problem. It effectively still leaves the race window open. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysselftests/bpf: skip test_perf_branches_hw() on unsupported platformsMatt Bobrowski1-3/+3
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ] Gracefully skip the test_perf_branches_hw subtest on platforms that do not support LBR or require specialized perf event attributes to enable branch sampling. For example, AMD's Milan (Zen 3) supports BRS rather than traditional LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW, attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the generic setup used within this test. Notably, it also probably doesn't hold much value to special case perf event configurations for selected micro architectures. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysselftests/bpf: Fix failure paths in send_signal testAlexei Starovoitov1-0/+5
[ Upstream commit c13339039891dbdfa6c1972f0483bd07f610b776 ] When test_send_signal_kern__open_and_load() fails parent closes the pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child continues and enters infinite loop, while parent is stuck in wait(NULL). Other error paths have similar issue, so kill the child before waiting on it. The bug was discovered while compiling all of selftests with -O1 instead of -O2 which caused progs/test_send_signal_kern.c to fail to load. Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysperf record: skip synthesize event when open evsel failedShuai Xue1-1/+1
[ Upstream commit 163e5f2b96632b7fb2eaa965562aca0dbdf9f996 ] When using perf record with the `--overwrite` option, a segmentation fault occurs if an event fails to open. For example: perf record -e cycles-ct -F 1000 -a --overwrite Error: cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' perf: Segmentation fault #0 0x6466b6 in dump_stack debug.c:366 #1 0x646729 in sighandler_dump_stack debug.c:378 #2 0x453fd1 in sigsegv_handler builtin-record.c:722 #3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090] #4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862 #5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943 #6 0x458090 in record__synthesize builtin-record.c:2075 #7 0x45a85a in __cmd_record builtin-record.c:2888 #8 0x45deb6 in cmd_record builtin-record.c:4374 #9 0x4e5e33 in run_builtin perf.c:349 #10 0x4e60bf in handle_internal_command perf.c:401 #11 0x4e6215 in run_argv perf.c:448 #12 0x4e653a in main perf.c:555 #13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72] #14 0x43a3ee in _start ??:0 The --overwrite option implies --tail-synthesize, which collects non-sample events reflecting the system status when recording finishes. However, when evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist is not initialized and remains NULL. The code unconditionally calls record__synthesize() in the error path, which iterates through the NULL evlist pointer and causes a segfault. To fix it, move the record__synthesize() call inside the error check block, so it's only called when there was no error during recording, ensuring that evlist is properly initialized. Fixes: 4ea648aec019 ("perf record: Add --tail-synthesize option") Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daystools/nolibc/stdio: let perror work when NOLIBC_IGNORE_ERRNO is setBenjamin Berg1-0/+4
[ Upstream commit c485ca3aff2442adea4c08ceb5183e671ebed22a ] There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such, simply print the message with "unknown error" rather than the integer value of errno. Fixes: acab7bcdb1bc ("tools/nolibc/stdio: add perror() to report the errno value") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysobjtool: Fix weak symbol detectionJosh Poimboeuf1-4/+4
[ Upstream commit 72567c630d32bc31f671977f78228c80937ed80e ] find_symbol_hole_containing() fails to find a symbol hole (aka stripped weak symbol) if its section has no symbols before the hole. This breaks weak symbol detection if -ffunction-sections is enabled. Fix that by allowing the interval tree to contain section symbols, which are always at offset zero for a given section. Fixes a bunch of (-ffunction-sections) warnings like: vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction Fixes: 4adb23686795 ("objtool: Ignore extra-symbol code") Acked-by: Petr Mladek <pmladek@suse.com> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
8 daysobjtool: Fix find_{symbol,func}_containing()Peter Zijlstra3-54/+229
[ Upstream commit 5da6aea375cde499fdfac3cde4f26df4a840eb9f ] The current find_{symbol,func}_containing() functions are broken in the face of overlapping symbols, exactly the case that is needed for a new ibt/endbr supression. Import interval_tree_generic.h into the tools tree and convert the symbol tree to an interval tree to support proper range stabs. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220915111146.330203761@infradead.org Stable-dep-of: 72567c630d32 ("objtool: Fix weak symbol detection") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: mptcp: join: endpoints: longer transferMatthieu Baerts (NGI0)1-4/+4
[ Upstream commit 6457595db9870298ee30b6d75287b8548e33fe19 ] In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all endpoints tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ removed curly braces and stderr redirection ] Signed-off-by: Sasha Levin <sashal@kernel.org> [ Conflicts in mptcp_join.sh because commit 0c93af1f8907 ("selftests: mptcp: drop test_linkfail parameter") is not in this version. It moved the 4th parameter to an env var. To fix the conflicts, the new value simply needs to be added as the 4th argument instead of an env var. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: connect: fix fallback note due to OoOMatthieu Baerts (NGI0)1-1/+1
[ Upstream commit 63c643aa7b7287fdbb0167063785f89ece3f000f ] The "fallback due to TCP OoO" was never printed because the stat_ooo_now variable was checked twice: once in the parent if-statement, and one in the child one. The second condition was then always true then, and the 'else' branch was never taken. The idea is that when there are more ACK + MP_CAPABLE than expected, the test either fails if there was no out of order packets, or a notice is printed. Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Different operators used ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: join: rm: set backup flagMatthieu Baerts (NGI0)1-27/+27
[ Upstream commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 ] Some of these 'remove' tests rarely fail because a subflow has been reset instead of cleanly removed. This can happen when one extra subflow which has never carried data is being closed (FIN) on one side, while the other is sending data for the first time. To avoid such subflows to be used right at the end, the backup flag has been added. With that, data will be only carried on the initial subflow. Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07tracing/tools: Fix incorrcet short option in usage text for --threadsZhang Chujun1-1/+1
[ Upstream commit 53afec2c8fb2a562222948cb1c2aac48598578c9 ] The help message incorrectly listed '-t' as the short option for --threads, but the actual getopt_long configuration uses '-e'. This mismatch can confuse users and lead to incorrect command-line usage. This patch updates the usage string to correctly show: "-e, --threads NRTHR" to match the implementation. Note: checkpatch.pl reports a false-positive spelling warning on 'Run', which is intentional. Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: net: use BASH for bareudp testingPo-Hsu Lin1-1/+1
[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ] In bareudp.sh, this script uses /bin/sh and it will load another lib.sh BASH script at the very beginning. But on some operating systems like Ubuntu, /bin/sh is actually pointed to DASH, thus it will try to run BASH commands with DASH and consequently leads to syntax issues: # ./bareudp.sh: 4: ./lib.sh: Bad substitution # ./bareudp.sh: 5: ./lib.sh: source: not found # ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected Fix this by explicitly using BASH for bareudp.sh. This fixes test execution failures on systems where /bin/sh is not BASH. Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com> Link: https://bugs.launchpad.net/bugs/2129812 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and ↵Arnd Bergmann2-0/+38
loongarch" commit 6e8d96909a23c8078ee965bd48bb31cbef2de943 upstream. Unifying the asm-generic headers across 32-bit and 64-bit architectures based on the compiler provided macros was a good idea and appears to work with all user space, but it caused a regression when building old kernels on systems that have the new headers installed in /usr/include, as this combination trips an inconsistency in the kernel's own tools/include headers that are a mix of userspace and kernel-internal headers. This affects kernel builds on arm64, riscv64 and loongarch64 systems that might end up using the "#define __BITS_PER_LONG 32" default from the old tools headers. Backporting the commit into stable kernels would address this, but it would still break building kernels without that backport, and waste time for developers trying to understand the problem. arm64 build machines are rather common, and on riscv64 this can also happen in practice, but loongarch64 is probably new enough to not be used much for building old kernels, so only revert the bits for arm64 and riscv. Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/ Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: connect: trunc: read all recv dataMatthieu Baerts (NGI0)1-5/+13
commit ee79980f7a428ec299f6261bea4c1084dcbc9631 upstream. MPTCP Join "fastclose server" selftest is sometimes failing because the client output file doesn't have the expected size, e.g. 296B instead of 1024B. When looking at a packet trace when this happens, the server sent the expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE. It is then strange to see the client only receiving 296B, which would mean it only got a part of the second packet. The problem is then not on the networking side, but rather on the data reception side. When mptcp_connect is launched with '-f -1', it means the connection might stop before having sent everything, because a reset has been received. When this happens, the program was directly stopped. But it is also possible there are still some data to read, simply because the previous 'read' step was done with a buffer smaller than the pending data, see do_rnd_read(). In this case, it is important to read what's left in the kernel buffers before stopping without error like before. SIGPIPE is now ignored, not to quit the app before having read everything. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarchTiezhu Yang4-45/+13
[ Upstream commit 8386f58f8deda81110283798a387fb53ec21957c ] Now we specify the minimal version of GCC as 5.1 and Clang/LLVM as 11.0.0 in Documentation/process/changes.rst, __CHAR_BIT__ and __SIZEOF_LONG__ are usable, it is probably fine to unify the definition of __BITS_PER_LONG as (__CHAR_BIT__ * __SIZEOF_LONG__) in asm-generic uapi bitsperlong.h. In order to keep safe and avoid regression, only unify uapi bitsperlong.h for some archs such as arm64, riscv and loongarch which are using newer toolchains that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__. Suggested-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/all/d3e255e4746de44c9903c4433616d44ffcf18d1b.camel@xry111.site/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-arch/a3a4f48a-07d4-4ed9-bc53-5d383428bdd2@app.fastmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: net: local_termination: Wait for interfaces to come upAlexander Sverdlin1-0/+2
[ Upstream commit 57531b3416448d1ced36a2a974a4085ec43d57b0 ] It seems that most of the tests prepare the interfaces once before the test run (setup_prepare()), rely on setup_wait() to wait for link and only then run the test(s). local_termination brings the physical interfaces down and up during test run but never wait for them to come up. If the auto-negotiation takes some seconds, first test packets are being lost, which leads to false-negative test results. Use setup_wait() in run_test() to make sure auto-negotiation has been completed after all simple_if_init() calls on physical interfaces and test packets will not be lost because of the race against link establishment. Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: netdevsim: set test timeout to 10 minutesJakub Kicinski1-0/+1
commit afbf75e8da8ce8a0698212953d350697bb4355a6 upstream. The longest running netdevsim test, nexthop.sh, currently takes 5 min to finish. Around 260s to be exact, and 310s on a debug kernel. The default timeout in selftest is 45sec, so we need an explicit config. Give ourselves some headroom and use 10min. Commit under Fixes isn't really to "blame" but prior to that netdevsim tests weren't integrated with kselftest infra so blaming the tests themselves doesn't seem right, either. Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ↵Wang Liang1-0/+4
ethtool-common.sh [ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07netdevsim: add Makefile for selftestsDavid Wei1-0/+17
[ Upstream commit 8ff25dac88f616ebebb30830e3a20f079d7a30c9 ] Add a Makefile for netdevsim selftests and add selftests path to MAINTAINERS Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: d01f8136d46b ("selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: use destination options instead of hop-by-hopAnubhav Singh1-2/+2
[ Upstream commit f8e8486702abb05b8c734093aab1606af0eac068 ] The GRO self-test, gro.c, currently constructs IPv6 packets containing a Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path correctly handles IPv6 extension headers. However, network elements may be configured to drop packets with the Hop-by-Hop Options header (HBH). This causes the self-test to fail in environments where such network elements are present. To improve the robustness and reliability of this test in diverse network environments, switch from using IPPROTO_HOPOPTS to IPPROTO_DSTOPTS (Destination Options). The Destination Options header is less likely to be dropped by intermediate routers and still serves the core purpose of the test: validating GRO's handling of an IPv6 extension header. This change ensures the test can execute successfully without being incorrectly failed by network policies outside the kernel's control. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Anubhav Singh <anubhavsinggh@google.com> Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: fix GRO coalesce test and add ext header coalesce testsRichard Gobert1-6/+87
[ Upstream commit 4e321d590cec6053cb3c566413794706035ee638 ] Currently there is no test which checks that IPv6 extension header packets successfully coalesce. This commit adds a test, which verifies two IPv6 packets with HBH extension headers do coalesce, and another test which checks that packets with different extension header data do not coalesce in GRO. I changed the receive socket filter to accept a packet with one extension header. This change exposed a bug in the fragment test -- the old BPF did not accept the fragment packet. I updated correct_num_packets in the fragment test accordingly. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f8e8486702ab ("selftests/net: use destination options instead of hop-by-hop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: fix out-of-order delivery of FIN in gro:tcp testAnubhav Singh1-0/+8
[ Upstream commit 02d064de05b1fcca769391fa82d205bed8bb9bf0 ] Due to the gro_sender sending data packets and FIN packets in very quick succession, these are received almost simultaneously by the gro_receiver. FIN packets are sometimes processed before the data packets leading to intermittent (~1/100) test failures. This change adds a delay of 100ms before sending FIN packets in gro:tcp test to avoid the out-of-order delivery. The same mitigation already exists for the gro:ip test. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Anubhav Singh <anubhavsinggh@google.com> Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools: lib: thermal: use pkg-config to locate libnl3Sascha Hauer1-1/+6
[ Upstream commit b31f7f725cd932e2c2b41f3e4b66273653953687 ] To make libthermal more cross compile friendly use pkg-config to locate libnl3. Only if that fails fall back to hardcoded /usr/include/libnl3. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools: lib: thermal: don't preserve owner in installEmil Dahl Juhl1-1/+1
[ Upstream commit 1375152bb02ab2a8435e87ea27034482dbc95f57 ] Instead of preserving mode, timestamp, and owner, for the object files during installation, just preserve the mode and timestamp. When installing as root, the installed files should be owned by root. When installing as user, --preserve=ownership doesn't work anyway. This makes --preserve=ownership rather pointless. Signed-off-by: Emil Dahl Juhl <juhl.emildahl@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools bitmap: Add missing asm-generic/bitsperlong.h includeIan Rogers1-0/+1
[ Upstream commit f38ce0209ab4553906b44bd1159e35c740a84161 ] small_const_nbits is defined in asm-generic/bitsperlong.h which bitmap.h uses but doesn't include causing build failures in some build systems. Add the missing #include. Note the bitmap.h in tools has diverged from that of the kernel, so no changes are made there. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Yury Norov <yury.norov@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: André Almeida <andrealmeid@igalia.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Darren Hart <dvhart@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jason Xing <kerneljasonxing@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maurice Lambert <mauricelambert434@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Machata <petrm@nvidia.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yuyang Huang <yuyanghuang@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/Makefile: include $(INSTALL_DEP_TARGETS) in clean target to clean ↵Nai-Chen Cheng1-1/+1
net/lib dependency [ Upstream commit d3f7457da7b9527a06dbcbfaf666aa51ac2eeb53 ] The selftests 'make clean' does not clean the net/lib because it only processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves compiled objects in net/lib after cleaning, requiring manual cleanup. Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib dependency is properly cleaned. Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: Replace sleep with slowwaitDavid Ahern1-1/+1
[ Upstream commit 2f186dd5585c3afb415df80e52f71af16c9d3655 ] Replace the sleep in kill_procs with slowwait. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250910025828.38900-2-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: Disable dad for ipv6 in fcnal-test.shDavid Ahern1-0/+2
[ Upstream commit 53d591730ea34f97a82f7ec6e7c987ca6e34dc21 ] Constrained test environment; duplicate address detection is not needed and causes races so disable it. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250910025828.38900-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: traceroute: Use require_command()Ido Schimmel1-10/+3
[ Upstream commit 47efbac9b768553331b9459743a29861e0acd797 ] Use require_command() so that the test will return SKIP (4) when a required command is not present. Before: # ./traceroute.sh SKIP: Could not run IPV6 test without traceroute6 SKIP: Could not run IPV4 test without traceroute $ echo $? 0 After: # ./traceroute.sh TEST: traceroute6 not installed [SKIP] $ echo $? 4 Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: net: replace sleeps in fcnal-test with waitsJakub Kicinski1-214/+214
[ Upstream commit 15c068cb214d74a2faca9293b25f454242d0d65e ] fcnal-test.sh already includes lib.sh, use relevant helpers instead of sleeping. Replace sleep after starting nettest as a server with wait_local_port_listen. Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250909223837.863217-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: Ensure assert() triggers in psock_tpacket.cWake Liu1-0/+1
[ Upstream commit bc4c0a48bdad7f225740b8e750fdc1da6d85e1eb ] The get_next_frame() function in psock_tpacket.c was missing a return statement in its default switch case, leading to a compiler warning. This was caused by a `bug_on(1)` call, which is defined as an `assert()`, being compiled out because NDEBUG is defined during the build. Instead of adding a `return NULL;` which would silently hide the error and could lead to crashes later, this change restores the original author's intent. By adding `#undef NDEBUG` before including <assert.h>, we ensure the assertion is active and will cause the test to abort if this unreachable code is ever executed. Signed-off-by: Wake Liu <wakel@google.com> Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: Replace non-standard __WORDSIZE with sizeof(long) * 8Wake Liu1-2/+1
[ Upstream commit c36748e8733ef9c5f4cd1d7c4327994e5b88b8df ] The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>` header, is a GNU extension and not universally available with all toolchains, such as Clang when used with musl libc. This can lead to build failures in environments where this header is missing. The intention of the code is to determine the bit width of a C `long`. Replace the non-portable `__WORDSIZE` with the standard and portable `sizeof(long) * 8` expression to achieve the same result. This change also removes the inclusion of the now-unused `<bits/wordsize.h>` header. Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools/power x86_energy_perf_policy: Prefer driver HWP limitsLen Brown1-4/+9
[ Upstream commit 2734fdbc9bb8a3aeb309ba0d62212d7f53f30bc7 ] When we are successful in using cpufreq min/max limits, skip setting the raw MSR limits entirely. This is necessary to avoid undoing any modification that the cpufreq driver makes to our sysfs request. eg. intel_pstate may take our request for a limit that is valid according to HWP.CAP.MIN/MAX and clip it to be within the range available in PLATFORM_INFO. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools/power x86_energy_perf_policy: Enhance HWP enableLen Brown1-4/+9
[ Upstream commit c97c057d357c4b39b153e9e430bbf8976e05bd4e ] On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE. Also, skip writing the MSR_PM_ENABLE if HWP is already enabled. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools/power x86_energy_perf_policy: Fix incorrect fopen mode usageKaushlendra Kumar1-2/+2
[ Upstream commit 62127655b7ab7b8c2997041aca48a81bf5c6da0c ] The fopen_or_die() function was previously hardcoded to open files in read-only mode ("r"), ignoring the mode parameter passed to it. This patch corrects fopen_or_die() to use the provided mode argument, allowing for flexible file access as intended. Additionally, the call to fopen_or_die() in err_on_hypervisor() incorrectly used the mode "ro", which is not a valid fopen mode. This is fixed to use the correct "r" mode. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools/cpupower: Fix incorrect size in cpuidle_state_disable()Kaushlendra Kumar1-2/+3
[ Upstream commit 23199d2aa6dcaf6dd2da772f93d2c94317d71459 ] Fix incorrect size parameter passed to cpuidle_state_write_file() in cpuidle_state_disable(). The function was incorrectly using sizeof(disable) which returns the size of the unsigned int variable (4 bytes) instead of the actual length of the string stored in the 'value' buffer. Since 'value' is populated with snprintf() to contain the string representation of the disable value, we should use the length returned by snprintf() to get the correct string length for writing to the sysfs file. This ensures the correct number of bytes is written to the cpuidle state disable file in sysfs. Link: https://lore.kernel.org/r/20250917050820.1785377-1-kaushlendra.kumar@intel.com Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07bpftool: Fix -Wuninitialized-const-pointer warnings with clang >= 21Tom Stellard2-2/+2
[ Upstream commit 5612ea8b554375d45c14cbb0f8ea93ec5d172891 ] This fixes the build with -Werror -Wall. btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer] 71 | info.func_info = ptr_to_u64(&finfo); | ^~~~~ prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer] 2294 | info.func_info = ptr_to_u64(&func_info); | v2: - Initialize instead of using memset. Signed-off-by: Tom Stellard <tstellar@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <qmo@kernel.org> Link: https://lore.kernel.org/bpf/20250917183847.318163-1-tstellar@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07tools/cpupower: fix error return value in cpupower_write_sysfs()Kaushlendra Kumar1-1/+1
[ Upstream commit 57b100d4cf14276e0340eecb561005c07c129eb8 ] The cpupower_write_sysfs() function currently returns -1 on write failure, but the function signature indicates it should return an unsigned int. Returning -1 from an unsigned function results in a large positive value rather than indicating an error condition. Fix this by returning 0 on failure, which is more appropriate for an unsigned return type and maintains consistency with typical success/failure semantics where 0 indicates failure and non-zero indicates success (bytes written). Link: https://lore.kernel.org/r/20250828063000.803229-1-kaushlendra.kumar@intel.com Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/bpf: Upon failures, exit with code 1 in test_xsk.shRicardo B. Marlière1-0/+2
[ Upstream commit 2a912258c90e895363c0ffc0be8a47f112ab67b7 ] Currently, even if some subtests fails, the end result will still yield "ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are any failures. Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20250828-selftests-bpf-test_xsk_ret-v1-1-e6656c01f397@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/bpf: Fix bpf_prog_detach2 usage in test_lirc_mode2Ricardo B. Marlière1-1/+1
[ Upstream commit 98857d111c53954aa038fcbc4cf48873e4240f7c ] Commit e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs") redefined the way that bpf_prog_detach2() returns. Therefore, adapt the usage in test_lirc_mode2_user.c. Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250828-selftests-bpf-v1-1-c7811cd8b98c@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07libbpf: Fix powerpc's stack register definition in bpf_tracing.hAndrii Nakryiko1-1/+1
[ Upstream commit 7221b9caf84b3294688228a19273d74ea19a2ee4 ] retsnoop's build on powerpc (ppc64le) architecture ([0]) failed due to wrong definition of PT_REGS_SP() macro. Looking at powerpc's implementation of stack unwinding in perf_callchain_user_64() clearly shows that stack pointer register is gpr[1]. Fix libbpf's definition of __PT_SP_REG for powerpc to fix all this. [0] https://kojipkgs.fedoraproject.org/work/tasks/1544/137921544/build.log Fixes: 138d6153a139 ("samples/bpf: Enable powerpc support") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org> Link: https://lore.kernel.org/r/20251020203643.989467-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: mptcp: join: mark 'delete re-add signal' as skipped if not supportedMatthieu Baerts (NGI0)1-1/+1
[ Upstream commit c3496c052ac36ea98ec4f8e95ae6285a425a2457 ] The call to 'continue_if' was missing: it properly marks a subtest as 'skipped' if the attached condition is not valid. Without that, the test is wrongly marked as passed on older kernels. Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-19 21:56:04 +0300