summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2015-11-11Merge branch 'next' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...
2015-11-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+3
Merge final patch-bomb from Andrew Morton: "Various leftovers, mainly Christoph's pci_dma_supported() removals" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pci: remove pci_dma_supported usbnet: remove ifdefed out call to dma_supported kaweth: remove ifdefed out call to dma_supported sfc: don't call dma_supported nouveau: don't call pci_dma_supported netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported cx23885: use pci_set_dma_mask insted of pci_dma_supported cx25821: use pci_set_dma_mask insted of pci_dma_supported cx88: use pci_set_dma_mask insted of pci_dma_supported saa7134: use pci_set_dma_mask insted of pci_dma_supported saa7164: use pci_set_dma_mask insted of pci_dma_supported tw68-core: use pci_set_dma_mask insted of pci_dma_supported pcnet32: use pci_set_dma_mask insted of pci_dma_supported lib/string.c: add ULL suffix to the constant definition hugetlb: trivial comment fix selftests/mlock2: add ULL suffix to 64-bit constants selftests/mlock2: add missing #define _GNU_SOURCE
2015-11-11Merge tag 'linux-kselftest-4.4-rc1' of ↵Linus Torvalds22-53/+362
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This 12 patch update for 4.4-rc1 consists of a new pstore test and fixes to existing tests" * tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: breakpoint: Actually build it selftests: vm: Try harder to allocate huge pages selftests: Make scripts executable selftests: kprobe: Choose an always-defined function to probe selftests: memfd: Stop unnecessary rebuilds selftests: Add missing #include directives selftests/seccomp: Be more precise with syscall arguments. selftests/seccomp: build and pass on arm64 selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned selftests/pstore: add pstore test scripts going with reboot selftests/pstore: add pstore test script for pre-reboot selftests: add .gitignore for efivarfs
2015-11-11selftests/mlock2: add ULL suffix to 64-bit constantsGeert Uytterhoeven1-2/+2
On 32-bit (e.g. m68k): mlock2-tests.c: In function 'lock_check': mlock2-tests.c:293: warning: integer constant is too large for 'long' type mlock2-tests.c:294: warning: integer constant is too large for 'long' type mlock2-tests.c:299: warning: integer constant is too large for 'long' type ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11selftests/mlock2: add missing #define _GNU_SOURCEGeert Uytterhoeven1-0/+1
On glibc 2.3.6: mlock2-tests.c: In function 'seek_to_smaps_entry': mlock2-tests.c:158: warning: implicit declaration of function 'getline' According to the manpage of getline(), it needs _GNU_SOURCE before glibc 2.10. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10Merge tag 'libnvdimm-for-4.4' of ↵Linus Torvalds1-2/+162
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Outside of the new ACPI-NFIT hot-add support this pull request is more notable for what it does not contain, than what it does. There were a handful of development topics this cycle, dax get_user_pages, dax fsync, and raw block dax, that need more more iteration and will wait for 4.5. The patches to make devm and the pmem driver NUMA aware have been in -next for several weeks. The hot-add support has not, but is contained to the NFIT driver and is passing unit tests. The coredump support is straightforward and was looked over by Jeff. All of it has received a 0day build success notification across 107 configs. Summary: - Add support for the ACPI 6.0 NFIT hot add mechanism to process updates of the NFIT at runtime. - Teach the coredump implementation how to filter out DAX mappings. - Introduce NUMA hints for allocations made by the pmem driver, and as a side effect all devm allocations now hint their NUMA node by default" * tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: coredump: add DAX filtering for FDPIC ELF coredumps coredump: add DAX filtering for ELF coredumps acpi: nfit: Add support for hot-add nfit: in acpi_nfit_init, break on a 0-length table pmem, memremap: convert to numa aware allocations devm_memremap_pages: use numa_mem_id devm: make allocations numa aware by default devm_memremap: convert to return ERR_PTR devm_memunmap: use devres_release() pmem: kill memremap_pmem() x86, mm: quiet arch_add_memory()
2015-11-10Merge tag 'rtc-v4.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - Fix rtctest error path New drivers: - Microcrystal RV8803 Subsystem wide cleanups: - remove misuse of IRQF_NO_SUSPEND flag Drivers: - at91rm9200: clear RTC alarm status flag prior to suspending - davinci: remove incorrect reference to probe function - ds1307: Fix alarm programming for mcp794xx - ds1390: trickle charger support, fix ds1390_get_reg - isl1208: Pass the IRQF_ONESHOT flag - opal: fix type of token - pcf2127: fix RTC_READ_VL, remove useless driver version - pcf85063: return an error when date is invalid - pcf8563: add CLKOUT to common clock framework - rx8025: remove unnecessary braces - s3c: Set year, month, day value for setting alarm - stmp3xxx: unify register access macros - License fixes: pcf2127, da9063 - wakeup-source support for isl12057 and opal" * tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits) rtc: Add a driver for Micro Crystal RV8803 rtc: s3c: Set year, month, day value for setting alarm rtc: ds1307: Fix alarm programming for mcp794xx rtc: isl12057: enable support for the standard "wakeup-source" property rtc: opal: enable support for the stardard "wakeup-source" property rtc: isl1208: Pass the IRQF_ONESHOT flag rtc: pcf8563: add CLKOUT to common clock framework rtc: davinci: remove incorrect reference to probe function rtc: at91rm9200: clear RTC alarm status flag prior to suspending rtc: pcf2127: remove useless driver version rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl rtc: stmp3xxx: unify register access macros rtc: da9063: GPL copyright inconsistency fix rtc: pcf85063: return an error when date is invalid rtc: rx8025: remove unnecessary braces rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag rtc: opal: fix type of token rtc: ds1390: Add trickle charger device tree binding ...
2015-11-07selftests: run lib/test_printf moduleKees Cook3-0/+19
This runs the lib/test_printf module to make sure printf is operating sanely. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge tag 'powerpc-4.4-1' of ↵Linus Torvalds33-3/+244
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...
2015-11-06selftests: vm: add tests for lock on faultEric B Munson4-0/+807
Test the mmap() flag, and the mlockall() flag. These tests ensure that pages are not faulted in until they are accessed, that the pages are unevictable once faulted in, and that VMA splitting and merging works with the new VM flag. The second test ensures that mlock limits are respected. Note that the limit test needs to be run a normal user. Also add tests to use the new mlock2 family of system calls. [treding@nvidia.com: : Fix mlock2-tests for 32-bit architectures] [treding@nvidia.com: ensure the mlock2 syscall number can be found] [treding@nvidia.com: use the right arguments for main()] Signed-off-by: Eric B Munson <emunson@akamai.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: gnuplot slabifo extended statSergey Senozhatsky1-0/+275
GNUplot `slabinfo -X' stats, collected, for example, using the following command: while [ 1 ]; do slabinfo -X >> stats; sleep 1; done `slabinfo-gnuplot.sh stats' pre-processes collected records and generate graphs (totals, slabs sorted by size, slabs sorted by size). Graphs can be [individually] regenerate with different samples range and graph width-heigh (-r %d,%d and -s %d,%d options). To visually compare N `totals' graphs: slabinfo-gnuplot.sh -t FILE1-totals FILE2-totals ... FILEN-totals Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: cosmetic globals cleanupSergey Senozhatsky1-27/+27
checkpatch.pl complains about globals being explicitly zeroed out: "ERROR: do not initialise globals to 0 or NULL". New globals, introduced in this patch set, have no explicit 0 initialization; clean up the old ones to make it less hairy. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: output sizes in bytesSergey Senozhatsky1-37/+51
Introduce "-B|--Bytes" opt to disable store_size() dynamic size scaling and report size in bytes instead. This `expands' the interface a bit, it's impossible to use printf("%6s") anymore to output sizes. Example: slabinfo -X -N 2 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a Besides, store_size() does not use powers of two for G/M/K if (value > 1000000000UL) { divisor = 100000000UL; trailer = 'G'; } else if (value > 1000000UL) { divisor = 100000UL; trailer = 'M'; } else if (value > 1000UL) { divisor = 100; trailer = 'K'; } Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: introduce extended totals modeSergey Senozhatsky1-10/+44
Add "-X|--Xtotals" opt to output extended totals summary, which includes: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) Example: ======= slabinfo --X -N 1 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 120->69 Active: 65 Memory used: 568.3M # Loss : 30.4M MRatio: 5% # Objects : 920.1K # PartObj: 161.2K ORatio: 17% Per Cache Average Min Max Total --------------------------------------------------------- #Objects 14.1K 1 227.8K 920.1K #Slabs 533 1 11.7K 34.7K #PartSlab 86 0 4.3K 5.6K %PartSlab 24% 0% 100% 16% PartObjs 17 0 129.3K 161.2K % PartObj 17% 0% 100% 17% Memory 8.7M 8.1K 384.7M 568.3M Used 8.2M 160 366.5M 537.9M Loss 468.8K 0 18.2M 30.4M Per Object Average Min Max --------------------------------------------- Memory 587 8 8.1K User 584 8 8.1K Loss 2 0 64 Slabs sorted by size ---------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 384.7M 11732/40/10 18 3 0 95 a Slabs sorted by loss ---------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 18.2M 11732/40/10 18 3 0 95 a Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: fix alternate opts namesSergey Senozhatsky1-3/+5
Fix mismatches between usage() output and real opts[] options. Add missing alternative opt names, e.g., '-S' had no '--Size' opts[] entry, etc. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: sort slabs by lossSergey Senozhatsky1-4/+21
Introduce opt "-L|--sort-loss" to sort and output slabs by loss (waste) in slabcache(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: limit the number of reported slabsSergey Senozhatsky1-3/+15
Introduce opt "-N|--lines=K" to limit the number of slabs being reported in output_slabs(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: use getopt no_argument/optional_argumentSergey Senozhatsky1-17/+17
This patchset adds 'extended' slabinfo mode that provides additional information: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) The patches also introduces several new slabinfo options to limit the number of slabs reported, sort slabs by loss (waste); and some fixes. Extended output example (slabinfo -X -N 2): Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a The last patch in the series addresses Linus' comment from http://marc.info/?l=linux-mm&m=144148518703321&w=2 (well, it's been some time. sorry.) gnuplot script takes the slabinfo records file, where every record is a `slabinfo -X' output. So the basic workflow is, for example, as follows: while [ 1 ]; do slabinfo -X -N 2 >> stats; sleep 1; done ^C slabinfo-gnuplot.sh stats The last command will produce 3 png files (and 3 stats files) -- graph of slabinfo totals -- graph of slabs by size -- graph of slabs by loss It's also possible to select a range of records for plotting (a range of collected slabinfo outputs) via `-r 10,100` (for example); and compare totals from several measurements (to visially compare slabs behaviour (10,50 range)) using pre-parsed totals files: slabinfo-gnuplot.sh -r 10,50 -t stats-totals1 .. stats-totals2 This also, technically, supports ktest. Upload new slabinfo to target, collect the stats and give the resulting stats file to slabinfo-gnuplot This patch (of 8): Use getopt constants in `struct option' ->has_arg instead of numerical representations. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge tag 'staging-4.4-rc1' of ↵Linus Torvalds2-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver update for 4.4-rc1. If you were disappointed for 4.3-rc1 that we didn't contribute enough changesets, you should be happy with this pull request of over 2400 patches. But overall we removed more lines of code than we added, which is nice to see. Full details in the shortlog. All of these have been in linux-next for a while" Greg, I've never been disappointed in how few commits Staging contributes to the kernel.. Never. * tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits) Staging: rtl8192u: ieee80211: added missing blank lines Staging: rtl8192u: ieee80211: removed unnecessary braces Staging: rtl8192u: ieee80211: corrected block comments Staging: rtl8192u: ieee80211: corrected indent Staging: rtl8192u: ieee80211: added missing spaces after if Staging: rtl8192u: ieee80211: added missing space around '=' Staging: rtl8192u: ieee80211: fixed position of else statements Staging: rtl8192u: ieee80211: fixed open brace positions staging: rdma: ipath: Remove unneeded vairable. staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c staging: rtl8188eu: operator = replaced by += in loop increment staging: rtl8188eu: occurrence of the 5 GHz code marked staging: rtl8188eu: increment placed into for loop header staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie ...
2015-11-05Merge tag 'usb-4.4-rc1' of ↵Linus Torvalds2-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.4-rc1. As usual, most of the changes are in the gadget subsystem, and we removed a host controller for a device that is no longer in existance, and probably never was even made public. There is also other minor driver updates and new device ids, full details in the changelog. All of these have been in linux-next for a while" * tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits) USB: core: Codestyle fix in urb.c usb: misc: usb3503: Use i2c_add_driver helper macro usb: host: lpc32xx: don't unregister phy device usb: host: lpc32xx: balance clk enable/disable on removal usb: host: lpc32xx: fix warnings caused by enabling unprepared clock uwb: drp: Use setup_timer uwb: neh: Use setup_timer uwb: rsv: Use setup_timer USB: qcserial: add Sierra Wireless MC74xx/EM74xx usb: chipidea: otg: don't wait vbus drops below BSV when starts host chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE() doc: dt-binding: ci-hdrc-usb2: split vendor specific properties usb: chipidea: imx: add imx6ul usb support doc: dt-binding: ci-hdrc-usb2: improve property description usb: chipidea: imx: add usb support for imx7d Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry usb: chipidea: Add support for 'phy-clkgate-delay-us' property usb: chipidea: Use extcon framework for VBUS and ID detect usb: gadget: net2280: restore ep_cfg after defect7374 workaround usb: dwc2: host: Fix use after free w/ simultaneous irqs ...
2015-11-05Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+2
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
2015-11-04Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds4-2/+564
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu changes from Ingo Molnar: "There are two main areas of changes: - Rework of the extended FPU state code to robustify the kernel's usage of cpuid provided xstate sizes - and related changes (Dave Hansen)" - math emulation enhancements: new modern FPU instructions support, with testcases, plus cleanups (Denys Vlasnko)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/fpu: Fixup uninitialized feature_name warning x86/fpu/math-emu: Add support for FISTTP instructions x86/fpu/math-emu, selftests: Add test for FISTTP instructions x86/fpu/math-emu: Add support for FCMOVcc insns x86/fpu/math-emu: Add support for F[U]COMI[P] insns x86/fpu/math-emu: Remove define layer for undocumented opcodes x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns x86/fpu/math-emu: Remove !NO_UNDOC_CODE x86/fpu: Check CPU-provided sizes against struct declarations x86/fpu: Check to ensure increasing-offset xstate offsets x86/fpu: Correct and check XSAVE xstate size calculations x86/fpu: Add C structures for AVX-512 state components x86/fpu: Rework YMM definition x86/fpu/mpx: Rework MPX 'xstate' types x86/fpu: Add xfeature_enabled() helper instead of test_bit() x86/fpu: Remove 'xfeature_nr' x86/fpu: Rework XSTATE_* macros to remove magic '2' x86/fpu: Rename XFEATURES_NR_MAX x86/fpu: Rename XSAVE macros x86/fpu: Remove partial LWP support definitions ...
2015-11-04Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds6-2/+1011
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm changes from Ingo Molnar: "The main change in this cycle is another step in the big x86 system call interface rework by Andy Lutomirski, which moves most of the low level x86 entry code from assembly to C, for all syscall entries except native 64-bit system calls: arch/x86/entry/entry_32.S | 182 ++++------ arch/x86/entry/entry_64_compat.S | 547 ++++++++----------------------- 194 insertions(+), 535 deletions(-) ... our hope is that the final remaining step (converting native 64-bit system calls) will be less painful as all the previous steps, given that most of the legacies and quirks are concentrated around native 32-bit and compat environments" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on um/x86: Fix build after x86 syscall changes x86/asm: Remove the xyz_cfi macros from dwarf2.h selftests/x86: Style fixes for the 'unwind_vdso' test x86/entry/64/compat: Document sysenter_fix_flags's reason for existence x86/entry: Split and inline syscall_return_slowpath() x86/entry: Split and inline prepare_exit_to_usermode() x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY x86/entry: Micro-optimize compat fast syscall arg fetch x86/entry: Force inlining of 32-bit syscall code x86/entry: Make irqs_disabled checks in exit code depend on lockdep x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls x86/asm: Remove thread_info.sysenter_return x86/entry/32: Re-implement SYSENTER using the new C path x86/entry/32: Switch INT80 to the new C syscall path x86/entry/32: Open-code return tracking from fork and kthreads x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace ...
2015-11-04Merge branch 'perf-core-for-linus' of ↵Linus Torvalds192-1872/+8489
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Improve accuracy of perf/sched clock on x86. (Adrian Hunter) - Intel DS and BTS updates. (Alexander Shishkin) - Intel cstate PMU support. (Kan Liang) - Add group read support to perf_event_read(). (Peter Zijlstra) - Branch call hardware sampling support, implemented on x86 and PowerPC. (Stephane Eranian) - Event groups transactional interface enhancements. (Sukadev Bhattiprolu) - Enable proper x86/intel/uncore PMU support on multi-segment PCI systems. (Taku Izumi) - ... misc fixes and cleanups. The perf tooling team was very busy again with 200+ commits, the full diff doesn't fit into lkml size limits. Here's an (incomplete) list of the tooling highlights: New features: - Change the default event used in all tools (record/top): use the most precise "cycles" hw counter available, i.e. when the user doesn't specify any event, it will try using cycles:ppp, cycles:pp, etc and fall back transparently until it finds a working counter. (Arnaldo Carvalho de Melo) - Integration of perf with eBPF that, given an eBPF .c source file (or .o file built for the 'bpf' target with clang), will get it automatically built, validated and loaded into the kernel via the sys_bpf syscall, which can then be used and seen using 'perf trace' and other tools. (Wang Nan) Various user interface improvements: - Automatic pager invocation on long help output. (Namhyung Kim) - Search for more options when passing args to -h, e.g.: (Arnaldo Carvalho de Melo) $ perf report -h interface Usage: perf report [<options>] --gtk Use the GTK2 interface --stdio Use the stdio interface --tui Use the TUI interface - Show ordered command line options when -h is used or when an unknown option is specified. (Arnaldo Carvalho de Melo) - If options are passed after -h, show just its descriptions, not all options. (Arnaldo Carvalho de Melo) - Implement column based horizontal scrolling in the hists browser (top, report), making it possible to use the TUI for things like 'perf mem report' where there are many more columns than can fit in a terminal. (Arnaldo Carvalho de Melo) - Enhance the error reporting of tracepoint event parsing, e.g.: $ oldperf record -e sched:sched_switc usleep 1 event syntax error: 'sched:sched_switc' \___ unknown tracepoint Run 'perf list' for a list of valid events Now we get the much nicer: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ can't access trace events Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' And after we have those mount point permissions fixed: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. I.e. basically now the event parsing routing uses the strerror_open() routines introduced by and used in 'perf trace' work. (Jiri Olsa) - Fail properly when pattern matching fails to find a tracepoint, i.e. '-e non:existent' was being correctly handled, with a proper error message about that not being a valid event, but '-e non:existent*' wasn't, fix it. (Jiri Olsa) - Do event name substring search as last resort in 'perf list'. (Arnaldo Carvalho de Melo) E.g.: # perf list clock List of pre-defined events (to be used in -e): cpu-clock [Software event] task-clock [Software event] uncore_cbox_0/clockticks/ [Kernel PMU event] uncore_cbox_1/clockticks/ [Kernel PMU event] kvm:kvm_pvclock_update [Tracepoint event] kvm:kvm_update_master_clock [Tracepoint event] power:clock_disable [Tracepoint event] power:clock_enable [Tracepoint event] power:clock_set_rate [Tracepoint event] syscalls:sys_enter_clock_adjtime [Tracepoint event] syscalls:sys_enter_clock_getres [Tracepoint event] syscalls:sys_enter_clock_gettime [Tracepoint event] syscalls:sys_enter_clock_nanosleep [Tracepoint event] syscalls:sys_enter_clock_settime [Tracepoint event] syscalls:sys_exit_clock_adjtime [Tracepoint event] syscalls:sys_exit_clock_getres [Tracepoint event] syscalls:sys_exit_clock_gettime [Tracepoint event] syscalls:sys_exit_clock_nanosleep [Tracepoint event] syscalls:sys_exit_clock_settime [Tracepoint event] Intel PT hardware tracing enhancements: - Accept a zero --itrace period, meaning "as often as possible". In the case of Intel PT that is the same as a period of 1 and a unit of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter) - Harmonize itrace's synthesized callchains with the existing --max-stack tool option. (Adrian Hunter) - Allow time to be displayed in nanoseconds in 'perf script'. (Adrian Hunter) - Fix potential infinite loop when handling Intel PT timestamps. (Adrian Hunter) - Slighly improve Intel PT debug logging. (Adrian Hunter) - Warn when AUX data has been lost, just like when processing PERF_RECORD_LOST. (Adrian Hunter) - Further document export-to-postgresql.py script. (Adrian Hunter) - Add option to synthesize branch stack from auxtrace data. (Adrian Hunter) Misc notable changes: - Switch the default callchain output mode to 'graph,0.5,caller', to make it look like the default for other tools, reducing the learning curve for people used to 'caller' based viewing. (Arnaldo Carvalho de Melo) - various call chain usability enhancements. (Namhyung Kim) - Introduce the 'P' event modifier, meaning 'max precision level, please', i.e.: $ perf record -e cycles:P usleep 1 Is now similar to: $ perf record usleep 1 Useful, for instance, when specifying multiple events. (Jiri Olsa) - Add 'socket' sort entry, to sort by the processor socket in 'perf top' and 'perf report'. (Kan Liang) - Introduce --socket-filter to 'perf report', for filtering by processor socket. (Kan Liang) - Add new "Zoom into Processor Socket" operation in the perf hists browser, used in 'perf top' and 'perf report'. (Kan Liang) - Allow probing on kmodules without DWARF. (Masami Hiramatsu) - Fix 'perf probe -l' for probes added to kernel module functions. (Masami Hiramatsu) - Preparatory work for the 'perf stat record' feature that will allow generating perf.data files with counting data in addition to the sampling mode we have now (Jiri Olsa) - Update libtraceevent KVM plugin. (Paolo Bonzini) - ... plus lots of other enhancements that I failed to list properly, by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda, Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim, Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang Nan, Yang Shi and Yunlong Song" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits) perf unwind: Pass symbol source to libunwind tools build: Fix libiberty feature detection perf tools: Compile scriptlets to BPF objects when passing '.c' to --event perf record: Add clang options for compiling BPF scripts perf bpf: Attach eBPF filter to perf event perf tools: Make sure fixdep is built before libbpf perf script: Enable printing of branch stack perf trace: Add cmd string table to decode sys_bpf first arg perf bpf: Collect perf_evsel in BPF object files perf tools: Load eBPF object into kernel perf tools: Create probe points for BPF programs perf tools: Enable passing bpf object file to --event perf ebpf: Add the libbpf glue perf tools: Make perf depend on libbpf perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore perf tools: Enable pre-event inherit setting by config terms perf symbols: we can now read separate debug-info files based on a build ID perf symbols: Fix type error when reading a build-id perf tools: Search for more options when passing args to -h perf stat: Cache aggregated map entries in extra cpumap ...
2015-11-04selftests: breakpoint: Actually build itBen Hutchings1-1/+1
Fixes: 9fae100cbd10 ("selftests: breakpoints: fix installing error on ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04selftests: vm: Try harder to allocate huge pagesBen Hutchings1-1/+14
If we need to increase the number of huge pages, drop caches first to reduce fragmentation and then check that we actually allocated as many as we wanted. Retry once if that doesn't work. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04selftests: Make scripts executableBen Hutchings2-0/+0
Fixes: 87b2d44026e0 ("selftests: add memfd/sealing page-pinning tests") Fixes: 2bf9e0ab08c6 ("locking/static_keys: Provide a selftest") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04selftests: kprobe: Choose an always-defined function to probeBen Hutchings5-11/+11
do_fork() is no longer defined on x86, so probe _do_fork() instead. Fixes: 3033f14ab78c ("clone: support passing tls argument via C ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04selftests: memfd: Stop unnecessary rebuildsBen Hutchings1-6/+6
Instead of explicitly running the compiler, add dependencies and take advantage of implicit rules to build only as necessary. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04selftests: Add missing #include directivesBen Hutchings4-0/+4
Several C programs fail to include the headers declaring all the functions they call, resulting in warnings or errors. After this, memfd_test.c is still missing some function declarations but can't easily get them because of a conflict between <linux/fcntl.h> and <sys/fcntl.h>. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-04Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds6-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: "The main changes in this cycle were: - Improvements to expedited grace periods (Paul E McKenney) - Performance improvements to and locktorture tests for percpu-rwsem (Oleg Nesterov, Paul E McKenney) - Torture-test changes (Paul E McKenney, Davidlohr Bueso) - Documentation updates (Paul E McKenney) - Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov, Patrick Marlier)" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs() rcu: Better hotplug handling for synchronize_sched_expedited() rcu: Enable stall warnings for synchronize_rcu_expedited() rcu: Add tasks to expedited stall-warning messages rcu: Add online/offline info to expedited stall warning message rcu: Consolidate expedited CPU selection rcu: Prepare for consolidating expedited CPU selection cpu: Remove try_get_online_cpus() rcu: Stop excluding CPU hotplug in synchronize_sched_expedited() rcu: Stop silencing lockdep false positive for expedited grace periods rcu: Switch synchronize_sched_expedited() to IPI locktorture: Fix module unwind when bad torture_type specified torture: Forgive non-plural arguments rcutorture: Fix unused-function warning for torturing_tasks() rcutorture: Fix module unwind when bad torture_type specified rcu_sync: Cleanup the CONFIG_PROVE_RCU checks locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read() locking/percpu-rwsem: Fix the comments outdated by rcu_sync locking/percpu-rwsem: Make use of the rcu_sync infrastructure locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe ...
2015-11-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-1/+223
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement provides: - More y2038 work in the area of ntp and pps. - Optimization of posix cpu timers - New time related selftests - Some new clocksource drivers - The usual pile of fixes, cleanups and improvements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) timeconst: Update path in comment timers/x86/hpet: Type adjustments clocksource/drivers/armada-370-xp: Implement ARM delay timer clocksource/drivers/tango_xtal: Add new timer for Tango SoCs clocksource/drivers/imx: Allow timer irq affinity change clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr() clocksource/drivers/h8300_*: Remove unneeded memset()s clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup() clocksource/drivers/em_sti: Remove unneeded memset()s clocksource/drivers/mediatek: Use GPT as sched clock source clockevents/drivers/mtk: Fix spurious interrupt leading to crash posix_cpu_timer: Reduce unnecessary sighand lock contention posix_cpu_timer: Convert cputimer->running to bool posix_cpu_timer: Check thread timers only when there are active thread timers posix_cpu_timer: Optimize fastpath_timer_check() timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments timers: Use __fls in apply_slack() clocksource: Remove return statement from void functions net: sfc: avoid using timespec ntp/pps: use y2038 safe types in pps_event_time ...
2015-11-03rtc: rtctest: enabling UIE for a chip that doesn't support it returns EINVALUwe Kleine-König1-1/+1
Calling ioctl(..., RTC_UIE_ON, ...) without CONFIG_RTC_INTF_DEV_UIE_EMUL either ends in rtc_update_irq_enable if rtc->uie_unsupported is true or in __rtc_set_alarm in the if (!rtc->ops->set_alarm) branch. In both cases the return value is -EINVAL. So check for that one instead of ENOTTY. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-03selftests/seccomp: Be more precise with syscall arguments.Robert Sesek1-11/+35
Certain syscall emulation layers strictly check that the number of arguments match what the syscall handler expects. The KILL_one_arg_one and KILL_one_arg_six tests passed more parameters than expected to various syscalls, causing failures in this emulation mode. Instead, test using syscalls that take the appropriate number of arguments. Signed-off-by: Robert Sesek <rsesek@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-02acpi: nfit: Add support for hot-addVishal Verma1-2/+162
Add a .notify callback to the acpi_nfit_driver that gets called on a hotplug event. From this, evaluate the _FIT ACPI method which returns the updated NFIT with handles for the hot-plugged NVDIMM. Iterate over the new NFIT, and add any new tables found, and register/enable the corresponding regions. In the nfit test framework, after normal initialization, update the NFIT with a new hot-plugged NVDIMM, and directly call into the driver to update its view of the available regions. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Elliott, Robert <elliott@hpe.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: <linux-acpi@vger.kernel.org> Cc: <linux-nvdimm@lists.01.org> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-02Merge branch 'acpica'Rafael J. Wysocki1-1/+1
* acpica: ACPICA: Update version to 20150930 ACPICA: Debugger: Fix dead lock issue ocurred in single stepping mode ACPI: Enable build of AML interpreter debugger ACPICA: Debugger: Add thread ID support so that single step mode can only apply to the debugger thread ACPICA: Debugger: Fix "terminate" command by cleaning up subsystem shutdown logic ACPICA: Debugger: Fix "quit/exit" command by cleaning up user commands termination logic ACPICA: Linuxize: Export debugger files to Linux ACPICA: iASL: General cleanup of the file suffix #defines ACPICA: Improve typechecking, both compile-time and runtime ACPICA: Update NFIT table to rename a flags field ACPICA: Debugger: Update mutexes used for multithreaded debugger ACPICA: Update exception code for "file not found" error ACPICA: iASL: Add symbolic operator support for Index() operator ACPICA: Remove unnecessary conditional compilation
2015-10-31selftests/x86: Add a fork() to entry_from_vm86 to catch fork bugsAndy Lutomirski1-0/+4
Mere possession of vm86 state is strange. Make sure that nothing gets corrupted if we fork after calling vm86(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Stas Sergeev <stsp@list.ru> Link: http://lkml.kernel.org/r/08f83295460a80e41dc5e3e81ec40d6844d316f5.1446270067.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-29perf unwind: Pass symbol source to libunwindRabin Vincent1-1/+4
Even if --symfs is used to point to the debug binaries, we send in the non-debug filenames to libunwind, which leads to libunwind not finding the debug frame. Fix this by preferring the file in --symfs, if it is available. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rabin Vincent <rabinv@axis.com> Link: http://lkml.kernel.org/r/1446104978-26429-1-git-send-email-rabin.vincent@axis.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29tools build: Fix libiberty feature detectionRabin Vincent1-2/+2
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature build command. This many include for example -I or -L to point to libraries and include files in custom paths. In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD macro which always sends in CFLAGS and LDFLAGS. The libiberty build line however doesn't use the BUILD macro and thus needs to send in CFLAGS and LDFLAGS explicitly. Without this, when using custom CFLAGS/LDFLAGS, libiberty fails to be detected and the perf link fails with something like: LINK perf libbfd.a(bfd.o): In function `bfd_errmsg': bfd.c:(.text+0x168): undefined reference to `xstrerror' bbfd.a(opncls.o): In function `_bfd_new_bfd': opncls.c:(.text+0xe8): undefined reference to `objalloc_create' ... Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rabin Vincent <rabinv@axis.com> Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf tools: Compile scriptlets to BPF objects when passing '.c' to --eventWang Nan7-9/+83
This patch provides infrastructure for passing source files to --event directly using: # perf record --event bpf-file.c command This patch does following works: 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is expanded to allow caller tell it whether the passed file is source file or object. 2) llvm__compile_bpf() is called to compile the '.c' file, the result is saved into memory. Use bpf_object__open_buffer() to load the in-memory object. Introduces a bpf-script-example.c so we can manually test it: # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1 Note that '--clang-opt' must put before '--event'. Futher patches will merge it into a testcase so can be tested automatically. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf record: Add clang options for compiling BPF scriptsWang Nan2-0/+13
Although previous patch allows setting BPF compiler related options in perfconfig, on some ad-hoc situation it still requires passing options through cmdline. This patch introduces 2 options to 'perf record' for this propose: --clang-path and --clang-opt. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com [ Add the new options to the 'record' man page ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf bpf: Attach eBPF filter to perf eventWang Nan3-0/+24
This is the final patch which makes basic BPF filter work. After applying this patch, users are allowed to use BPF filter like: # perf record --event ./hello_world.o ls A bpf_fd field is appended to 'struct evsel', and setup during the callback function add_bpf_event() for each 'probe_trace_event'. PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly created perf event. The file descriptor of the eBPF program is passed to perf record using previous patches, and stored into evsel->bpf_fd. It is possible that different perf event are created for one kprobe events for different CPUs. In this case, when trying to call the ioctl, EEXIST will be return. This patch doesn't treat it as an error. Committer note: The bpf proggie used so far: __attribute__((section("fork=_do_fork"), used)) int fork(void *ctx) { return 0; } char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = 0x40300; failed to produce any samples, even with forks happening and it being running in system wide mode. That is because now the filter is being associated, and the code above always returns zero, meaning that all forks will be probed but filtered away ;-/ Change it to 'return 1;' instead and after that: # trace --no-syscalls --event /tmp/foo.o 0.000 perf_bpf_probe:fork:(ffffffff8109be30)) 2.333 perf_bpf_probe:fork:(ffffffff8109be30)) 3.725 perf_bpf_probe:fork:(ffffffff8109be30)) 4.550 perf_bpf_probe:fork:(ffffffff8109be30)) ^C# And it works with all tools, including 'perf trace'. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf tools: Make sure fixdep is built before libbpfJiri Olsa1-1/+1
While doing 'make -C tools/perf build-test': LD fixdep-in.o LINK fixdep /bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied make[6]: *** [bpf.o] Error 1 make[5]: *** [libbpf-in.o] Error 2 make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2 make[4]: *** Waiting for unfinished jobs.... The fixdep tool needs to be built as the first binary. Libraries are built in paralel, so each of them needs to depend on fixdep target. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf script: Enable printing of branch stackStephane Eranian2-3/+93
This patch improves perf script by enabling printing of the branch stack via the 'brstack' and 'brstacksym' arguments to the field selection option -F. The option is off by default and operates only if the perf.data file has branch stack content. The branches are printed in to/from pairs. The most recent branch is printed first. The number of branch entries vary based on the underlying hardware and filtering used. The brstack prints FROM/TO addresses in raw hexadecimal format. The brstacksym prints FROM/TO addresses in symbolic form wherever possible. $ perf script -F ip,brstack 5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ... $ perf script -F ip,brstacksym 4011e0 noploop+0x0/noploop+0x0/P/-/-/0 The notation F/T/M/X/A/C describes the attributes of the branch. F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL) Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yuanfang Chen <cyfmxc@gmail.com> Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf trace: Add cmd string table to decode sys_bpf first argArnaldo Carvalho de Melo1-0/+7
# perf trace -e bpf perf record -e /tmp/foo.o -a 362.779 (0.130 ms): perf/3451 bpf(cmd: PROG_LOAD, uattr: 0x7ffe9a6825d0, size: 48) = 3 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2b0nknu53baz9e0wj4thcdd8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf bpf: Collect perf_evsel in BPF object filesWang Nan3-7/+99
This patch creates a 'struct perf_evsel' for every probe in a BPF object file(s) and fills 'struct evlist' with them. The previously introduced dummy event is now removed. After this patch, the following command: # perf record --event filter.o ls Can trace on each of the probes defined in filter.o. The core of this patch is bpf__foreach_tev(), which calls a callback function for each 'struct probe_trace_event' event for a bpf program with each associated file descriptors. The add_bpf_event() callback creates evsels by calling parse_events_add_tracepoint(). Since bpf-loader.c will not be built if libbpf is turned off, an empty bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors. Committer notes: Before: # /tmp/oldperf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.198 MB perf.data ] # perf evlist /tmp/foo.o # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 I.e. we create just the PERF_TYPE_SOFTWARE (type: 1), PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.210 MB perf.data ] # perf evlist -v perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd, which is how, after setting up the event via the kprobes interface, the 'perf_bpf_probe:fork' event is accessible via the perf_event_open syscall. This is all transient, as soon as the 'perf record' session ends, these probes will go away. To see how it looks like, lets try doing a neverending session, one that expects a control+C to end: # perf record --event /tmp/foo.o -a So, with that in place, we can use 'perf probe' to see what is in place: # perf probe -l perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c) We also can use debugfs: [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events p:perf_bpf_probe/fork _text+638512 Ok, now lets stop and see if we got some forks: [root@felicio linux]# perf record --event /tmp/foo.o -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ] [root@felicio linux]# perf script sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30) <SNIP> Sure enough, we have 111 forks :-) Callchains seems to work as well: # perf report --stdio --no-child # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 562 of event 'perf_bpf_probe:fork' # Event count (approx.): 562 # # Overhead Command Shared Object Symbol # ........ ........ ................ ............ # 44.66% sh [kernel.vmlinux] [k] _do_fork | ---_do_fork entry_SYSCALL_64_fastpath __libc_fork make_child 26.16% make [kernel.vmlinux] [k] _do_fork <SNIP> # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf tools: Load eBPF object into kernelWang Nan3-0/+39
This patch utilizes bpf_object__load() provided by libbpf to load all objects into kernel. Committer notes: Testing it: When using an incorrect kernel version number, i.e., having this in your eBPF proggie: int _version __attribute__((section("version"), used)) = 0x40100; For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event parsing time, to provide a better error report to the user: # perf record --event /tmp/foo.o sleep 1 libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: libbpf: -- END LOG -- libbpf: failed to load program 'fork=_do_fork' libbpf: failed to load object '/tmp/foo.o' event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+ kernel, the whole process goes thru: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.202 MB perf.data ] # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf tools: Create probe points for BPF programsWang Nan3-1/+268
This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf tools: Enable passing bpf object file to --eventWang Nan6-1/+88
By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>