| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
* ad8801 dac
- new driver supporting ad8801 and ad8803 DACs.
* adc12138
- new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
- new driver
* mxc6255
- add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
- add support for the vz89te part which drops the voc_short channel and adds
CRCs compared to other supported parts.
New features
* core
- immutable triggers. These effectively grant exclusive control over a
trigger. The typical usecase is a device representing an analog part
(perhaps a MUX) that needs to control the sampling of a downstream
ADC.
- resource managed trigger registration and triggered_buffer_init.
- iio_push_event now protected against case of the event interface
registration not having yet occured. Only matters if an interrupt
can occur during this window - might happen on shared interrupt lines.
- helper to let a driver query if the trigger it is using is provided by
itself (using the convention of both device and trigger having the same
parent).
* tools
- iio-utils. Used channel modifier scaling in preference to generic scaling
when both exist.
* at91-adc
- Add support for touchscreen switches closure time needed by some newer
parts.
* stx104
- support the ADC channels on this ADC/DAC board. As these are the primary
feature of the board also move the driver to the iio/adc directory.
* sx9500
- device tree bindings.
Cleanups / Fixes
* ad5755
- fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
- drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
- avoid an unused functional warning due to rework in PM core code.
- remove .owner field setting as done by i2c_core.
* ina2xx
- clear out a left over debug field from chip global data.
* hid-sensors
- avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
- fix non static symbol warnings.
* ms5611
- fetch and enable regulators unconditionally when they aren't optional.
* sca3000
- whitespace cleanup.
* st_sensors
- fetch and enable regulators unconditionally rather than having them
supported as optional regulators (missunderstanding on my part amongst
others a while back)
- followup to previous patch fixes error checking on the regulators.
- mark symbols static where possible.
- use the 'is it my trigger' help function. This prevents the odd case
of another device triggering from the st-sensors trigger whilst the
st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
- add missing of_node_put.
* vz89x
- rework to all support of new devices.
- prevent reading of a corrupted buffer.
- fixup a return value of 0/1 in a bool returning function.
Address updates
- Vlad Dogaru email address change.
|
|
We need the IIO changes in here for future patches to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 4.8 cycle.
We have a big rework of the kxsd9 driver queued up behind the fix below and
a fix for a recent fix that was marked for stable.
Hence this fix series is perhaps a little more urgent than average for IIO.
* core
- a fix for a fix in the last set. The recent fix for blocking ops when
! task running left a path (unlikely one) in which the function return
value was not set - so initialise it to 0.
- The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
fractions. Turned out a fix for this was in Analog's tree but hadn't made
it upstream.
* bmc150
- reset chip at init time. At least one board out there ends up coming up
in an unstable state due to noise during power up. The reset does no
harm on other boards.
* kxsd9
- Fix a bug in the reported scaling due to failing to set the integer
part to 0.
* hid-sensors-pressure
- Output was in the wrong units to comply with the IIO ABI.
* tools
- iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
out for having no trigger when we explicitly said we didn't want to have
one.
|
|
We want the staging fixes in here as well to handle merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in
linux-next with no reported issues"
* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
arm: dts: rockchip: add reset node for the exist saradc SoCs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: accel: kxsd9: Fix raw read return
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
include/linux: fix excess fence.h kernel-doc notation
staging: wilc1000: correctly check if associatedsta has not been found
staging: wilc1000: NULL dereference on error
staging: wilc1000: txq_event: Fix coding error
MAINTAINERS: Add file patterns for ion device tree bindings
MAINTAINERS: Update maintainer entry for wilc1000
iio: chemical: atlas-ph-sensor: fix typo in val assignment
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: dt2811: fix a precedence bug
staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
...
|
|
Passing the trigger-less mode option on the command line causes
iio_generic_buffer to fail searching for an IIO trigger.
Fix this by skipping trigger initialization if trigger-less mode is
requested.
Technically it actually fixes:
7c7e9dad70 where the bug was introduced but as the window to the patch
below that changes the context was very small let's mark it with that.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Fixes: deb4d1fdcb5af ("iio: generic_buffer: Fix --trigger-num option")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Now there are channel modifiers with their own scaling those should be
used when possible over the generic channel type scaling.
Examples are of IIO_TEMP channel having a generic scaling value, and
another having IIO_MOD_TEMP_AMBIENT modifier with another scaling value.
Previously the first scaling value for a channel type would be applied
to all channels of like type in iio_generic_buffer
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A few fixes from the perf departement
- prevent a imbalanced preemption disable in the events teardown code
- prevent out of bound acces in perf userspace
- make perf tools compile with UCLIBC again
- a fix for the userspace unwinder utility"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Use this_cpu_ptr() when stopping AUX events
perf evsel: Do not access outside hw cache name arrays
tools lib: Reinstate strlcpy() header guard with __UCLIBC__
perf unwind: Use addr_location::addr instead of ip for entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing
Jonathan writes:
First round of new features, device support and cleanups for IIO in the 4.9 cycle.
Device support
* ak8974
- New driver and bindings for this 2009 vintage magnetometer (it was very
popular back then!)
* atlas-ph-sensor
- ORP sensor support(I had to look up what one of these was)
* cio-dac
- New driver for Measurement Computing DAC boards
* dmard06
- New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
- New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
- max6675 and max31855 new driver
* mt6577 auxdac
- new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
hardware.
* ti-adc161s626
- new driver for this TI single channel differential ADC.
* vcnl4000
- support vcnl4010 and vcnl4020 which are compatible for all features
currently supported by this driver.
New features
* Core
- Allow retrieving of underlying iio_dev from a callback buffer handle.
This is needed to allow client drivers to perform operations such as
configuring the trigger used.
* hid-sensors
- asynchronous resume support to avoid really long resume times.
* kxcjk-1013
- add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
- lsiio now enumerates processed as well as raw channels.
Cleanup
* ad7298
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ad7793
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ade7854
- checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
- Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* hdc100x
- Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
- Add driver specific prefixes to defines and function names.
- Remove excessive logging.
- Drop newlines which add nothing to readability.
- General tidying up of comments.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
- Add driver specific prefixes to defines, enums and function names.
- Drop comma's from available attribute output as not ABI compliant.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
- devicetree bindings.
* mag3110
- This one wasn't locking to protect against mode switches during
raw_reads. Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
- Fix missing selects for triggered buffer support in Kconfig.
* nau7802
- Use complete instead of complete_all as only one completion at a time.
* sx9500
- Use complete instead of complete_all as only one completion at a time.
* us5182d
- Add a missing error code asignment instead of checking the result of
an already checked statement.
* vcnl4000
- Use BIT macro where appropriate.
- Refactor return codes in read_raw callback.
- Add some missing locking for concurrent accesses to the device.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are a few GPIO fixes for v4.8.
I was expecting some fallout from the new chardev rework but nothing
like that turned up att all. Instead a Kconfig confusion that I think
I have finally nailed, then some ordinary driver noise and trivia.
This fixes a Kconfig issue with UM: when I made GPIOLIB available to
all archs, that included UM, but the OF part of GPIOLIB requires
HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were implicitly
assuming OF_GPIO as their dependency but instead depended on OF alone
(the typical problem being a pointer inside gpio_chip not existing
unless OF_GPIO is selected) and then UM would fail to compile with
these drivers instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is certainly what
they meant and the only thing that makes sense anyway. GPIO with just
OF but !OF_GPIO does not make sense.
Also a fix for the max730x driver data pointer, and a minor comment
fix for the GPIO tools"
* tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make any OF dependent driver depend on OF_GPIO
gpio: Fix OF build problem on UM
gpio: max730x: set gpiochip data pointer before using it
tools/gpio: fix gpio-event-mon header comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also start/stop filter related fixes, a perf
event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Check return value of the perf_event_read() IPI
perf/core: Enable mapping of the stop filters
perf/core: Update filters only on executable mmap
perf/core: Fix file name handling for start/stop filters
perf/core: Fix event_function_local()
uprobes: Fix the memcg accounting
perf intel-pt: Fix occasional decoding errors when tracing system-wide
tools: Sync kvm related header files for arm64 and s390
perf probe: Release resources on error when handling exit paths
perf probe: Check for dup and fdopen failures
perf symbols: Fix annotation of objects with debuginfo files
perf script: Don't disable use_callchain if input is pipe
perf script: Show proper message when failed list scripts
perf jitdump: Add the right header to get the major()/minor() definitions
perf ppc64le: Fix build failure when libelf is not present
perf tools mem: Fix -t store option for record command
perf intel-pt: Fix ip compression
|
|
We have to check if the values are >= *_MAX, not just >, fix it.
From the bugzilla report:
''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.
It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"
Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''
Committer note:
Testing it:
$ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
[ perf record: Woken up 16 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
$ perf evlist
L1-dcache-load-misses
L1-dcache-loads
L1-dcache-stores
L1-icache-load-misses
LLC-load-misses
LLC-loads
LLC-store-misses
LLC-stores
branch-load-misses
branch-loads
dTLB-load-misses
dTLB-loads
dTLB-store-misses
dTLB-stores
iTLB-load-misses
iTLB-loads
node-load-misses
node-loads
node-store-misses
node-stores
$ perf list cache
List of pre-defined events (to be used in -e):
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
node-store-misses [Hardware cache event]
node-stores [Hardware cache event]
$
Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf tools build in recent kernels spews splat when cross compiling with uClibc:
| CC util/alias.o
| In file included from tools/perf/util/../ui/../util/cache.h:8:0,
| from tools/perf/util/../ui/helpline.h:7,
| from tools/perf/util/debug.h:8,
| from arch/../util/cpumap.h:9,
| from arch/../util/env.h:5,
| from arch/common.h:4,
| from arch/common.c:3:
| tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls]
| extern size_t strlcpy(char *dest, const char *src, size_t size);
^
This is after commit 61a6445e463a31 ("tools lib: Guard the strlcpy() header with
__GLIBC__").
The problem is uClibc also defines __GLIBC__ for exported headers for
applications. So add that specific check to not trip for uClibc.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Gynther <pgynther@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-snps-arc@lists.infradead.org
Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull virtio/vhost fixes from Michael Tsirkin:
- test fixes
- a vsock fix
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: add dma stubs
vhost/test: fix after swiotlb changes
vhost/vsock: drop space available check for TX vq
ringtest: test build fix
|
|
This fixes the srcline translation for call chains of user space
applications.
Before we got:
perf report --stdio --no-children -s sym,srcline -g address
8.92% [.] main mandelbrot.h:41
|
|--3.70%--main +8390240
| __libc_start_main +139950056726769
| _start +8388650
|
|--2.74%--main +8390189
|
--2.08%--main +8390296
__libc_start_main +139950056726769
_start +8388650
7.59% [.] main complex:1326
|
|--4.79%--main +8390203
| __libc_start_main +139950056726769
| _start +8388650
|
--2.80%--main +8390219
7.12% [.] __muldc3 libgcc2.c:1945
|
|--3.76%--__muldc3 +139950060519490
| main +8390224
| __libc_start_main +139950056726769
| _start +8388650
|
--3.32%--__muldc3 +139950060519512
main +8390224
With this patch applied, we instead get:
perf report --stdio --no-children -s sym,srcline -g address
8.92% [.] main mandelbrot.h:41
|
|--3.70%--main mandelbrot.h:41
| __libc_start_main +241
| _start +4194346
|
|--2.74%--main mandelbrot.h:41
|
--2.08%--main mandelbrot.h:41
__libc_start_main +241
_start +4194346
7.59% [.] main complex:1326
|
|--4.79%--main complex:1326
| __libc_start_main +241
| _start +4194346
|
--2.80%--main complex:1326
7.12% [.] __muldc3 libgcc2.c:1945
|
|--3.76%--__muldc3 libgcc2.c:1945
| main mandelbrot.h:39
| __libc_start_main +241
| _start +4194346
|
--3.32%--__muldc3 libgcc2.c:1945
main mandelbrot.h:39
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20160816153926.11288-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix occasional decoding errors when tracing system-wide with
Intel PT (Adrian Hunter)
- Fix ip compression in Intel PT for some specific packet types not
present on current hardware (Adrian Hunter)
- Fix annotation of objects with debuginfo files (Anton Blanchard)
- Fix build on Fedora Rawhide (25) wrt using the right header to
get the major() & minor() definitions in the jitdump code, now
it is deprecated getting those using sys/types.h, one has to use
sys/sysmacros.h (Arnaldo Carvalho de Melo)
- Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo)
- Check for dup and fdopen failures in 'perf probe' (Colin Ian King,
Arnaldo Carvalho de Melo)
- Fix showing callchains in pipe mode, i.e.
perf record -g -o - workload | perf script
now shows callchains (He Kuang)
- Show proper message when the scripts directory points to some
invalid location in 'perf script --list' (He Kuang)
- Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events
again (Jiri Olsa)
- Fix ppc64le build failure when libelf is not present (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In order to successfully decode Intel PT traces, context switch events
are needed from the moment the trace starts. Currently that is ensured
by using the 'immediate' flag which enables the switch event when it is
opened.
However, since commit 86c2786994bd ("perf intel-pt: Add support for
PERF_RECORD_SWITCH") that might not always happen. When tracing
system-wide the context switch event is added to the tracking event
which was not set as 'immediate'. Change that so it is.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 86c2786994bd ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
From a quick look nothing stands out as requiring changes to kvm tools
such as tools/perf/arch/s390/util/kvm-stat.c.
Silences these header checking warnings:
$ make -C tools/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: tools/arch/s390/include/uapi/asm/sie.h differs from kernel
Warning: tools/arch/arm64/include/uapi/asm/kvm.h differs from kernel
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-btutge414g516qmh6r5ienlj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zh2j4iqimralugke5qq7dn6d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dup and fdopen can potentially fail, so add some extra
error handling checks rather than assuming they always work.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1471038296-12956-1-git-send-email-colin.king@canonical.com
[ Free resources when those functions (now being verified) fail ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 73cdf0c6ea9c ("perf symbols: Record text offset in dso
to calculate objdump address") started storing the offset of
the text section for all DSOs:
if (elf_section_by_name(elf, &ehdr, &tshdr, ".text", NULL))
dso->text_offset = tshdr.sh_addr - tshdr.sh_offset;
Unfortunately this breaks debuginfo files, because we need to calculate
the offset of the text section in the associated executable file. As a
result perf annotate returns junk for all debuginfo files.
Fix this by using runtime_ss->elf which should point at the executable
when parsing a debuginfo file.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: 73cdf0c6ea9c ("perf symbols: Record text offset in dso to calculate objdump address")
Link: http://lkml.kernel.org/r/20160813115533.6de17912@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Enumerate the processed channels (e.g. *_input) as well the raw channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Because perf data from pipe do not have a header with evsel attr, we
should not check that and disable symbol_conf.use_callchain. Otherwise,
perf script won't show callchains even if the data stream contains
callchain.
Before:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1828 182630.186578: 250000 cpu-clock: ..b9499 setup_arg_pages
uname 1828 182630.186850: 250000 cpu-clock: ..83b20 ___might_sleep
uname 1828 182630.187153: 250000 cpu-clock: ..4b6be file_map_prot_ch
...
After:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1833 182675.927099: 250000 cpu-clock:
ba5520 _raw_spin_lock+0xfe200040 ([kernel.kallsyms])
389dd4 expand_downwards+0xfe200154 ([kernel.kallsyms])
389f34 expand_stack+0xfe200024 ([kernel.kallsyms])
3b957e setup_arg_pages+0xfe20019e ([kernel.kallsyms])
40c80f load_elf_binary+0xfe20042f ([kernel.kallsyms])
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf shows the usage message when perf scripts folder failed to open,
which misleads users to let them think the command is being mistyped.
This patch shows a proper message and guides users to check the
PERF_EXEC_PATH environment variable in that case.
Before:
$ perf script --list
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-l, --list list available scripts
After:
$ perf script --list
open(/home/user/perf-core/scripts) failed.
Check for "PERF_EXEC_PATH" env to set scripts dir.
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Noticed on Fedora Rawhide:
$ gcc --version
gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4)
$ rpm -q glibc
glibc-2.24.90-1.fc26.x86_64
$
CC /tmp/build/perf/util/jitdump.o
util/jitdump.c: In function 'jit_repipe_code_load':
util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
event->mmap2.maj = major(st.st_dev);
^~~~~
In file included from /usr/include/features.h:397:0,
from /usr/include/sys/types.h:25,
from util/jitdump.c:1:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
Fix it following that recomendation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Uninitialized channel pointer causes segmentation fault when we
call free(channel) during cleanup() with no channels initialized.
This happens when you exit early for usage errors. Initialize
the pointer to NULL when it is declared.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Tested-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fixes build after recent IOMMU-related changes,
mustly by adding more stubs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Recent changes to ptr_ring broke the ringtest
which lacks a likely() stub. Fix it up.
Fixes: 982fb490c298896d15e9323a882f34a57c11ff56
("ptr_ring: support zero length ring")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix for the nd_blk (NVDIMM Block Window Aperture) driver.
A spec clarification requires the driver to mask off reserved bits in
status register. This is tagged for -stable back to the v4.2 kernel.
- Fix for a kernel crash in the nvdimm unit tests when module loading
is interrupted with SIGTERM. Tagged for -stable since validation
efforts external to Intel use the unit tests for qualifying
backports.
- Add a new 'size' sysfs attribute for the BTT (NVDIMM Block
Translation Table) driver to make it symmetric with the other
namespace personality drivers (PFN and DAX) that provide a size
attribute for indicating how much namespace capacity is lost to
metadata.
The BTT change arrived at the start of the merge window and has
appeared in a -next release. It can technically wait for 4.9, but it
is small, fixes asymmetry in the libnvdimm-sysfs interface, and
something I would have squeezed into the v4.8 pull request had it
arrived a few days earlier.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
nvdimm, btt: add a size attribute for BTTs
libnvdimm, nd_blk: mask off reserved status bits
|
|
arch__post_process_probe_trace_events() calls get_target_map() to
prepare symbol table. get_target_map() is defined inside
util/probe-event.c.
probe-event.c will only get included in perf binary if CONFIG_LIBELF is
set. Hence arch__post_process_probe_trace_events() needs to be defined
inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com
[ Thunderbird MUA mangled it, fix that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Michael reported 'perf mem -t store record' being broken. The reason is
latest rework of this area:
commit acbe613e0c03 ("perf tools: Add monitored events array")
We don't mark perf_mem_events store record when -t store option is
specified.
Committer notes:
Before:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cycles:ppp
#
After:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cpu/mem-stores/P
#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: acbe613e0c03 ("perf tools: Add monitored events array")
Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer
to section 36.4.2.2 Target IP (TIP) Packet - IP Compression.
Existing Intel PT packet decoder did not support type 4, and got type 6
wrong. Because type 3 and type 4 have the same number of bytes, the
packet 'count' has been changed from being the number of ip bytes to
being the type code. That allows the Intel PT decoder to correctly
decide whether to sign-extend or use the last ip. However that also
meant the code had to be adjusted in a number of places.
Currently hardware is not using the new compression types, so this fix
has no effect on existing hardware.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The unit tests crash when hotplug races the previous probe. This race
requires that the loading of the nfit_test module be terminated with
SIGTERM, and the module to be unloaded while the ars scan is still
running.
In contrast to the normal nfit driver, the unit test calls
acpi_nfit_init() twice to simulate hotplug, whereas the nominal case
goes through the acpi_nfit_notify() event handler. The
acpi_nfit_notify() path is careful to flush the previous region
registration before servicing the hotplug event. The unit test was
missing this guarantee.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170
[..]
Call Trace:
[<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0
[<ffffffff810ce490>] process_one_work+0x2d0/0x680
[<ffffffff810ce331>] ? process_one_work+0x171/0x680
[<ffffffff810ce88e>] worker_thread+0x4e/0x480
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810d5343>] kthread+0xf3/0x110
[<ffffffff8199846f>] ret_from_fork+0x1f/0x40
[<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We have some tests that assume we're using std=gnu99, which is fine on
most compilers, but some old compilers use a different default.
So make it explicit that we want to use std=gnu99.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible fixes:
- Fix the lookup for a kernel module in 'perf probe', fixing for instance, the
erroneous return of "[raid10]" when looking for "[raid1]" (Konstantin Khlebnikov)
- Disable counters in a group before reading them in 'perf stat', to avoid skew (Mark Rutland)
- Fix adding probes to function aliases in systems using kaslr (Masami Hiramatsu)
- Trip libtraceevent trace_seq buffers, removing unnecessary memory usage that could
bring a system using tracepoint events with 'perf top' to a crawl, as the trace_seq
buffers start at a whooping 4 KB, which is very rarely used in perf's usecases,
so realloc it to the really used space as a last measure after using libtraceevent
functions to format the fields of tracepoint events (Arnaldo Carvalho de Melo)
- Fix 'perf probe' location when using DWARF on ppc64le (Ravi Bangoria)
- Allow specifying signedness casts to a 'perf probe' variable, to shorten
the number of steps to see signed values that otherwise would always appear
as hex values (Naohiro Aota)
Documentation fixes:
- Add 'bpf-output' field to 'perf script' usage message (Brendan Gregg)
Infrastructure fixes:
- Sync kernel header files: cpufeatures.h, {disabled,required}-features.h,
bpf.h and vmx.h, so that we get a clean build, without warnings about files
being different from the kernel counterparts.
A verification of the need or desirability of changes in tools/ based on what
was done in the kernel changesets was made and documented in the respective
file sync changesets (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Powerpc has Global Entry Point and Local Entry Point for functions. LEP
catches call from both the GEP and the LEP. Symbol table of ELF contains
GEP and Offset from which we can calculate LEP, but debuginfo does not
have LEP info.
Currently, perf prioritize symbol table over dwarf to probe on LEP for
ppc64le. But when user tries to probe with function parameter, we fall
back to using dwarf(i.e. GEP) and when function called via LEP, probe
will never hit.
For example:
$ objdump -d vmlinux
...
do_sys_open():
c0000000002eb4a0: e8 00 4c 3c addis r2,r12,232
c0000000002eb4a4: 60 00 42 38 addi r2,r2,96
c0000000002eb4a8: a6 02 08 7c mflr r0
c0000000002eb4ac: d0 ff 41 fb std r26,-48(r1)
$ sudo ./perf probe do_sys_open
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060896 filename_string=+0(%gpr4):string
For second case, perf probed on GEP. So when function will be called via
LEP, probe won't hit.
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB perf.data ]
To resolve this issue, let's not prioritize symbol table, let perf
decide what it wants to use. Perf is already converting GEP to LEP when
it uses symbol table. When perf uses debuginfo, let it find LEP offset
form symbol table. This way we fall back to probe on LEP for all cases.
After patch:
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904 filename_string=+0(%gpr4):string
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (11 samples) ]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of inline code, introduce function to post process kernel
probe trace events.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Due to:
1e61f78baf89 ("x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated")
No changes to tools using those headers (tools/arch/x86/lib/mem{set,cpu}_64.S)
seems necessary.
Detected by the tools build header drift checker:
$ make -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
GEN /tmp/build/perf/common-cmds.h
Warning: tools/arch/x86/include/asm/disabled-features.h differs from kernel
Warning: tools/arch/x86/include/asm/required-features.h differs from kernel
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
CC /tmp/build/perf/util/probe-finder.o
CC /tmp/build/perf/builtin-help.o
<SNIP>
^C$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ja75m7zk8j0jkzmrv16i5ehw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The way we're using kernel headers in tools/ now, with a copy that is
made to the same path prefixed by "tools/" plus checking if that copy
got stale, i.e. if the kernel counterpart changed, helps in keeping
track with new features that may be useful for tools to exploit.
For instance, looking at all the changes to bpf.h since it was last
copied to tools/include brings this to toolers' attention:
Need to investigate this one to check how to run a program via perf, setting up
a BPF event, that will take advantage of the way perf already calls clang/LLVM,
sets up the event and runs the workload in a single command line, helping in
debugging such semi cooperative programs:
96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
This one needs further investigation about using the feature it improves
in 'perf trace' to do some tcpdumpin' mixed with syscalls, tracepoints,
probe points, callgraphs, etc:
555c8a8623a3 ("bpf: avoid stack copy and use skb ctx for event output")
Add tracing just packets that are related to some container to that mix:
4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
4ed8ec521ed5 ("cgroup: bpf: Add BPF_MAP_TYPE_CGROUP_ARRAY")
Definetely needs to have example programs accessing task_struct from a bpf proggie
started from 'perf trace':
606274c5abd8 ("bpf: introduce bpf_get_current_task() helper")
Core networking related, XDP:
6ce96ca348a9 ("bpf: add XDP_TX xdp_action for direct forwarding")
6a773a15a1e8 ("bpf: add XDP prog type for early driver filter")
13c5c240f789 ("bpf: add bpf_get_hash_recalc helper")
d2485c4242a8 ("bpf: add bpf_skb_change_type helper")
6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Changes detected by the tools build system:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
INSTALL GTK UI
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-difq4ts1xvww6eyfs9e7zlft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There were changes related to the deprecation of the "pcommit"
instruction:
fd1d961dd681 ("x86/insn: remove pcommit")
dfa169bbee00 ("Revert "KVM: x86: add pcommit support"")
No need to update anything in the tools, as "pcommit" wasn't being
listed on the VMX_EXIT_REASONS in the tools/perf/arch/x86/util/kvm-stat.c
file.
Just grab fresh copies of these files to silence the file cache
coherency detector:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: tools/arch/x86/include/uapi/asm/vmx.h differs from kernel
INSTALL GTK UI
<SNIP>
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-07pmcc1ysydhyyxbmp1vt0l4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf probe' tool detects a variable's type and use the detected
type to add a new probe. Then, kprobes prints its variable in
hexadecimal format if the variable is unsigned and prints in decimal if
it is signed.
We sometimes want to see unsigned variable in decimal format (i.e.
sector_t or size_t). In that case, we need to investigate the variable's
size manually to specify just signedness.
This patch add signedness casting support. By specifying "s" or "u" as a
type, perf-probe will investigate variable size as usual and use the
specified signedness.
E.g. without this:
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9692 [003] d..1 971.096633: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d00
dbench-9692 [003] d..1 971.096685: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x1a3d80
dbench-9692 [003] d..1 971.096687: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d80
...
// need to investigate the variable size
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector:s64'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s64)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
With this:
// just use "s" to cast its signedness
$ perf probe -v -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9689 [001] d..1 1212.391237: submit_bio: (submit_bio+0x0/0x140) bi_sector=128
dbench-9689 [001] d..1 1212.391252: submit_bio: (submit_bio+0x0/0x140) bi_sector=131072
dbench-9697 [006] d..1 1212.398611: submit_bio: (submit_bio+0x0/0x140) bi_sector=30208
This commit also update perf-probe.txt to describe "types". Most parts
are based on existing documentation: Documentation/trace/kprobetrace.txt
Committer note:
Testing using 'perf trace':
# perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=0xc133c0)
3181.861 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffb8)
3181.881 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc0)
3184.488 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc8)
<SNIP>
4717.927 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7a88)
4717.970 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7880)
^C[root@jouet ~]#
Now, using this new feature:
[root@jouet ~]# perf probe -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
[root@jouet ~]# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145704)
0.017 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145712)
0.019 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145720)
2.567 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145728)
5631.919 probe:submit_bio:(ffffffffac3aee00) bi_sector=0)
5631.941 probe:submit_bio:(ffffffffac3aee00) bi_sector=8)
5631.945 probe:submit_bio:(ffffffffac3aee00) bi_sector=16)
5631.948 probe:submit_bio:(ffffffffac3aee00) bi_sector=24)
^C#
With callchains:
# trace --no-syscalls --ev probe:submit_bio/max-stack=10/
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662544)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.023 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662552)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.027 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662560)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
2.593 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662568)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
journal_submit_commit_record+0xa82001ac ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa82012e8 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
^C#
Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470710408-23515-1-git-send-email-naohiro.aota@hgst.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we don't have a tracee (i.e. we're attaching to a task or CPU),
counters can still be running after our workload finishes, and can still
be running as we read their values. As we read events one-by-one, there
can be arbitrary skew between values of events, even within a group.
This means that ratios within an event group are not reliable.
This skew can be seen if measuring a group of identical events, e.g:
# perf stat -a -C0 -e '{cycles,cycles}' sleep 1
To avoid this, we must stop groups from counting before we read the
values of any constituent events. This patch adds and makes use of a new
disable_counters() helper, which disables group leaders (and thus each
group as a whole). This mirrors the use of enable_counters() for
starting event groups in the absence of a tracee.
Closing a group leader splits the group, and without a disabled group
leader the newly split events will begin counting. Thus to ensure counts
are reliable we must defer closing group leaders until all counts have
been read. To do so this patch removes the event closing logic from the
read_counters() helper, explicitly closes the events using
perf_evlist__close(), which also aids legibility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1470747869-3567-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If module is "module" then dso->short_name is "[module]". Substring
comparing is't enough: "raid10" matches to "[raid1]". This patch also
checks terminating zero in module name.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/147039975648.715620.12985971832789032159.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adjust map->reloc offset for the unmapped address when finding
alternative symbol address from map, because KASLR can relocate the
kernel symbol address.
The same adjustment has been done when finding appropriate kernel symbol
address from map which was introduced by commit f90acac75713 ("perf
probe: Find given address from offline dwarf")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160806192948.e366f3fbc4b194de600f8326@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we use libtraceevent to format trace event fields into printable
strings to use in hist entries it is important to trim it from the
default 4 KiB it starts with to what is really used, to reduce the
memory footprint, so use realloc(seq.buffer, seq.len + 1) when returning
the seq.buffer formatted with the fields contents.
Reported-and-Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-t3hl7uxmilrkigzmc90rlhk2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This adds the 'bpf-output' field to the perf script usage message, and docs.
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470192469-11910-4-git-send-email-bgregg@netflix.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes: 97f69747d8b1 ('tools/gpio: add the gpio-event-mon tool')
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Mostly tooling fixes and some late tooling updates, plus two perf
related printk message fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests bpf: Use SyS_epoll_wait alias
perf tests: objdump output can contain multi byte chunks
perf record: Add --sample-cpu option
perf hists: Introduce output_resort_cb method
perf tools: Move config/Makefile into Makefile.config
perf tests: Add test for bitmap_scnprintf function
tools lib: Add bitmap_and function
tools lib: Add bitmap_scnprintf function
tools lib: Add bitmap_alloc function
tools lib traceevent: Ignore generated library files
perf tools: Fix build failure on perl script context
perf/core: Change log level for duration warning to KERN_INFO
perf annotate: Plug filename string leak
perf annotate: Introduce strerror for handling symbol__disassemble() errors
perf annotate: Rename symbol__annotate() to symbol__disassemble()
perf/x86: Modify error message in virtualized environment
perf target: str_error_r() always returns the buffer it receives
perf annotate: Use pipe + fork instead of popen
perf evsel: Introduce constructor for cycles event
|
|
Pull NTB updates from Jon Mason:
"NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the
ntb_perf and ntb_pingpong for increased debugability.
Also, modification to the ntb_transport layer to increase/decrease
the number of transport entries depending on the ring size"
* tag 'ntb-4.8' of git://github.com/jonmason/ntb:
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
ntb_tool: Add memory window debug support
ntb_perf: Allow limiting the size of the memory windows
NTB: allocate number transport entries depending on size of ring size
ntb_tool: BUG: Ensure the buffer size is large enough to return all spads
ntb_tool: Fix infinite loop bug when writing spad/peer_spad file
|
