summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-05-17perf stat: Separate bperf from bpf_profilerDmitrii Dolgov2-2/+7
[ Upstream commit ecc68ee216c6c5b2f84915e1441adf436f1b019b ] It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf tracepoint: Fix memory leak in is_valid_tracepoint()Yang Jihong1-0/+1
[ Upstream commit 9b86c49710eec7b4fbb78a0232b2dd0972a2b576 ] When is_valid_tracepoint() returns 1, need to call put_events_file() to free `dir_path`. Fixes: 25a7d914274de386 ("perf parse-events: Use get/put_events_file()") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230421025953.173826-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf symbols: Fix return incorrect build_id size in elf_read_build_id()Yang Jihong1-1/+1
[ Upstream commit 1511e4696acb715a4fe48be89e1e691daec91c0e ] In elf_read_build_id(), if gnu build_id is found, should return the size of the actually copied data. If descsz is greater thanBuild_ID_SIZE, write_buildid data access may occur. Fixes: be96ea8ffa788dcc ("perf symbols: Fix issue with binaries using 16-bytes buildids (v2)") Reported-by: Will Ochowicz <Will.Ochowicz@genusplc.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Will Ochowicz <Will.Ochowicz@genusplc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/lkml/CWLP265MB49702F7BA3D6D8F13E4B1A719C649@CWLP265MB4970.GBRP265.PROD.OUTLOOK.COM/T/ Link: https://lore.kernel.org/r/20230427012841.231729-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf cs-etm: Fix timeless decode mode detectionJames Clark1-12/+18
[ Upstream commit 449067f3fc9f340da54e383738286881e6634d0b ] In this context, timeless refers to the trace data rather than the perf event data. But when detecting whether there are timestamps in the trace data or not, the presence of a timestamp flag on any perf event is used. Since commit f42c0ce573df ("perf record: Always get text_poke events with --kcore option") timestamps were added to a tracking event when --kcore is used which breaks this detection mechanism. Fix it by detecting if trace timestamps exist by looking at the ETM config flags. This would have always been a more accurate way of doing it anyway. This fixes the following error message when using --kcore with Coresight: $ perf record --kcore -e cs_etm// --per-thread $ perf report The perf.data/data data has no samples! Fixes: f42c0ce573df79d1 ("perf record: Always get text_poke events with --kcore option") Reported-by: Yang Shi <shy828301@gmail.com> Signed-off-by: James Clark <james.clark@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: denik@google.com Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/lkml/CAHbLzkrJQTrYBtPkf=jf3OpQ-yBcJe7XkvQstX9j2frz4WF-SQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20230424134748.228137-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf map: Delete two variable initialisations before null pointer checks in ↵Markus Elfring1-2/+1
sort__sym_from_cmp() [ Upstream commit c160118a90d4acf335993d8d59b02ae2147a524e ] Addresses of two data structure members were determined before corresponding null pointer checks in the implementation of the function “sort__sym_from_cmp”. Thus avoid the risk for undefined behaviour by removing extra initialisations for the local variables “from_l” and “from_r” (also because they were already reassigned with the same value behind this pointer check). This issue was detected by using the Coccinelle software. Fixes: 1b9e97a2a95e4941 ("perf tools: Fix report -F symbol_from for data without branch info") Signed-off-by: <elfring@users.sourceforge.net> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf pmu: zfree() expects a pointer to a pointer to zero it after freeing ↵Arnaldo Carvalho de Melo1-1/+1
its contents [ Upstream commit 57f14b5ae1a97537f2abd2828ee7212cada7036e ] An audit showed just this one problem with zfree(), fix it. Fixes: 9fbc61f832ebf432 ("perf pmu: Add support for PMU capabilities") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf vendor events power9: Remove UTF-8 characters from JSON filesKajol Jain2-3/+3
[ Upstream commit 5d9df8731c0941f3add30f96745a62586a0c9d52 ] Commit 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events") added and updated power9 PMU JSON events. However some of the JSON events which are part of other.json and pipeline.json files, contains UTF-8 characters in their brief description. Having UTF-8 character could breaks the perf build on some distros. Fix this issue by removing the UTF-8 characters from other.json and pipeline.json files. Result without the fix: [command]# file -i pmu-events/arch/powerpc/power9/* pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/other.json: application/json; charset=utf-8 pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=utf-8 pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii [command]# Result with the fix: [command]# file -i pmu-events/arch/powerpc/power9/* pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/other.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii [command]# Fixes: 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/lkml/ZBxP77deq7ikTxwG@kernel.org/ Link: https://lore.kernel.org/r/20230328112908.113158-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf ftrace: Make system wide the default target for latency subcommandYang Jihong1-2/+4
[ Upstream commit ecd4960d908e27e40b63a7046df2f942c148c6f6 ] If no target is specified for 'latency' subcommand, the execution fails because - 1 (invalid value) is written to set_ftrace_pid tracefs file. Make system wide the default target, which is the same as the default behavior of 'trace' subcommand. Before the fix: # perf ftrace latency -T schedule failed to set ftrace pid After the fix: # perf ftrace latency -T schedule ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 0 | | 4 - 8 us | 2828 | #### | 8 - 16 us | 23953 | ######################################## | 16 - 32 us | 408 | | 32 - 64 us | 318 | | 64 - 128 us | 4 | | 128 - 256 us | 3 | | 256 - 512 us | 0 | | 512 - 1024 us | 1 | | 1 - 2 ms | 4 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 4 | | 256 - 512 ms | 2 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | Fixes: 53be50282269b46c ("perf ftrace: Add 'latency' subcommand") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230324032702.109964-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf tests record_offcpu.sh: Fix redirection of stderr to stdinPatrice Duroux1-1/+1
[ Upstream commit 9835b742ac3ee16dee361e7ccda8022f99d1cd94 ] It's not 2&>1, the correct is 2>&1 Fixes: ade1d0307b2fb3d9 ("perf offcpu: Update offcpu test for child process") Signed-off-by: Patrice Duroux <patrice.duroux@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20230303193058.21274-1-patrice.duroux@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf vendor events s390: Remove UTF-8 characters from JSON fileThomas Richter1-5/+5
[ Upstream commit eb2feb68cb7d404288493c41480843bc9f404789 ] Commit 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390") contains the verbal description for z16 extended counter set. However some entries of the public description contain UTF-8 characters which breaks the build on some distros. Fix this and remove the UTF-8 characters. Fixes: 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/ZBwkl77/I31AQk12@osiris Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf hist: Improve srcfile sort key performance (really)Namhyung Kim1-6/+1
[ Upstream commit 6094c7744bb0563e833e81d8df8513f9a4e7a257 ] The earlier commit f0cdde28fecc0d7f ("perf hist: Improve srcfile sort key performance") updated the srcfile logic but missed to change the ->cmp() callback which is called for every sample. It should use the same logic like in the srcline to speed up the processing because it'd return the same information repeatedly for the same address. The real processing will be done in sort__srcfile_collapse(). Fixes: f0cdde28fecc0d7f ("perf hist: Improve srcfile sort key performance") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230323025005.191239-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf script: Fix Python support when no libtraceeventAdrian Hunter9-30/+72
[ Upstream commit 80c3a7d9f20401169283b5670dbb8d7ac07a1d55 ] Python scripting can be used without libtraceevent. In particular, scripting for Intel PT does not use tracepoints, and so does not need libtraceevent support. Alter the build and employ conditional compilation to allow Python scripting without libtraceevent. Example: Before: $ ldd `which perf` | grep -i python $ ldd `which perf` | grep -i libtraceevent $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.031 MB perf.data ] $ perf script intel-pt-events.py |& head -3 Error: Couldn't find script `intel-pt-events.py' See perf script -l for available scripts. After: $ ldd `which perf` | grep -i python libpython3.10.so.1.0 => /lib/x86_64-linux-gnu/libpython3.10.so.1.0 (0x00007f4bac400000) $ ldd `which perf` | grep -i libtraceevent $ perf script intel-pt-events.py | head Intel PT Branch Trace, Power Events, Event Trace and PTWRITE Switch In 8021/8021 [000] 11234.097713404 0/0 perf-exec 8021/8021 [000] 11234.098041726 psb offset: 0x0 0 [unknown] ([unknown]) perf-exec 8021/8021 [000] 11234.098041726 cbr 45 freq: 4505 MHz (161%) 0 [unknown] ([unknown]) uname 8021/8021 [000] 11234.098082170 branches:uH tr strt 0 [unknown] ([unknown]) => 7f3a8b9422b0 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) uname 8021/8021 [000] 11234.098082379 branches:uH tr end 7f3a8b9422b0 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) => 0 [unknown] ([unknown]) uname 8021/8021 [000] 11234.098083629 branches:uH tr strt 0 [unknown] ([unknown]) => 7f3a8b9422b0 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) uname 8021/8021 [000] 11234.098083629 branches:uH call 7f3a8b9422b3 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) => 7f3a8b943050 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) uname 8021/8021 [000] 11234.098083837 branches:uH tr end 7f3a8b943060 _dl_start+0x10 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) => 0 [unknown] ([unknown]) IPC: 0.01 (9/938) uname 8021/8021 [000] 11234.098084670 branches:uH tr strt 0 [unknown] ([unknown]) => 7f3a8b943060 _dl_start+0x10 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20230315084321.14563-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf scripts intel-pt-events.py: Fix IPC output for Python 2Roman Lozko1-1/+1
[ Upstream commit 1f64cfdebfe0494264271e8d7a3a47faf5f58ec7 ] Integers are not converted to floats during division in Python 2 which results in incorrect IPC values. Fix by switching to new division behavior. Fixes: a483e64c0b62e93a ("perf scripting python: intel-pt-events.py: Add --insn-trace and --src-trace") Signed-off-by: Roman Lozko <lozko.roma@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230310150445.2925841-1-lozko.roma@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf build: Support python/perf.so testingIan Rogers2-4/+8
[ Upstream commit 7a9b223ca0761a7c7c72e569b86b84a907aa0f92 ] Add a build target to echo the python/perf.so's name from Makefile.perf. Use it in tests/make so the correct target is built and tested for. Fixes: caec54705adb73b0 ("perf build: Fix python/perf.so library's name") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Roberto Sassu <roberto.sassu@huawei.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17perf record: Fix "read LOST count failed" msg with sample readKan Liang1-1/+1
[ Upstream commit 07d85ba9d04e1ebd282f656a29ddf08c5b7b32a2 ] Hundreds of "read LOST count failed" error messages may be displayed, when the below command is launched. perf record -e '{cpu/mem-loads-aux/,cpu/event=0xcd,umask=0x1/}:S' -a According to the commit 89e3106fa25fb1b6 ("libperf: Handle read format in perf_evsel__read()"), the PERF_FORMAT_GROUP is only available for the leader. However, the record__read_lost_samples() goes through every entry of an evlist, which includes both leader and member. The member event errors out and triggers the error message. Since there may be hundreds of CPUs on a server, the message will be printed hundreds of times, which is very annoying. The message itself is correct, but the pr_err is a overkill. Other error messages in the record__read_lost_samples() are all pr_debug. To make the output format consistent, change the pr_err("read LOST count failed\n"); to pr_debug("read LOST count failed\n");. User can still get the message via -v option. Fixes: e3a23261ad06d598 ("perf record: Read and inject LOST_SAMPLES events") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230301150413.27011-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17selftests: netfilter: fix libmnl pkg-config usageJeremy Sowden1-2/+5
[ Upstream commit de4773f0235acf74554f6a64ea60adc0d7b01895 ] 1. Don't hard-code pkg-config 2. Remove distro-specific default for CFLAGS 3. Use pkg-config for LDLIBS Fixes: a50a88f026fb ("selftests: netfilter: fix a build error on openSUSE") Suggested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17selftests: srv6: make srv6_end_dt46_l3vpn_test more robustAndrea Mayer1-5/+5
[ Upstream commit 46ef24c60f8ee70662968ac55325297ed4624d61 ] On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 03a0b567a03d ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11perf intel-pt: Fix CYC timestamps after standalone CBRAdrian Hunter1-0/+2
commit 430635a0ef1ce958b7b4311f172694ece2c692b8 upstream. After a standalone CBR (not associated with TSC), update the cycles reference timestamp and reset the cycle count, so that CYC timestamps are calculated relative to that point with the new frequency. Fixes: cc33618619cefc6d ("perf tools: Add Intel PT support for decoding CYC packets") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11perf auxtrace: Fix address filter entire kernel sizeAdrian Hunter1-1/+4
commit 1f9f33ccf0320be21703d9195dd2b36a1c9a07cb upstream. kallsyms is not completely in address order. In find_entire_kern_cb(), calculate the kernel end from the maximum address not the last symbol. Example: Before: $ sudo cat /proc/kallsyms | grep ' [twTw] ' | tail -1 ffffffffc00b8bd0 t bpf_prog_6deef7357e7b4530 [bpf] $ sudo cat /proc/kallsyms | grep ' [twTw] ' | sort | tail -1 ffffffffc15e0cc0 t iwl_mvm_exit [iwlmvm] $ perf.d093603a05aa record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter Address filter: filter 0xffffffff93200000/0x2ceba000 After: $ perf.8fb0f7a01f8e record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter Address filter: filter 0xffffffff93200000/0x2e3e2000 Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11tracing/user_events: Ensure write index cannot be negativeBeau Belgrave1-0/+5
[ Upstream commit cd98c93286a30cc4588dfd02453bec63c2f4acf4 ] The write index indicates which event the data is for and accesses a per-file array. The index is passed by user processes during write() calls as the first 4 bytes. Ensure that it cannot be negative by returning -EINVAL to prevent out of bounds accesses. Update ftrace self-test to ensure this occurs properly. Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com Fixes: 7f5a08c79df3 ("user_events: Add minimal support for trace_event into ftrace") Reported-by: Doug Cook <dcook@linux.microsoft.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11rv: Fix addition on an uninitialized variable 'run'Colin Ian King1-1/+1
[ Upstream commit 54a0dffa62de0c91b406ff32082a121ccfa0d7f1 ] The variable run is not initialized however it is being accumulated by the return value from the call to ikm_run_monitor. Fix this by initializing run to zero at the start of the function. Link: https://lkml.kernel.org/r/20230424094730.105313-1-colin.i.king@gmail.com Fixes: 4bc4b131d44c ("rv: Add rv tool") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11Revert "objtool: Support addition to set CFA base"Josh Poimboeuf1-11/+0
[ Upstream commit e18398e80c73e3cc7d9c3d2e0bc06a4af8f4f1cb ] Commit 468af56a7bba ("objtool: Support addition to set CFA base") was added as a preparatory patch for arm64 support, but that support never came. It triggers a false positive warning on x86, so just revert it for now. Fixes the following warning: vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40 Fixes: 468af56a7bba ("objtool: Support addition to set CFA base") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/oe-kbuild-all/202304080538.j5G6h1AB-lkp@intel.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/powerpc/pmu: Fix sample field check in the ↵Kajol Jain1-2/+2
mmcra_thresh_marked_sample_test [ Upstream commit 8a32341cf04ba05974931b4664683c2c9fb84e56 ] The testcase verifies the setting of different fields in Monitor Mode Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro is used to extract the "sample" field, which then needs to be further processed to fetch rand_samp_elig and rand_samp_mode bits. But the current code is not passing valid sample field to EV_CODE_EXTRACT macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT. Fixes: 29cf373c5766 ("selftests/powerpc/pmu: Add interface test for mmcra register fields") Reported-by: David Binderman <dcb314@hotmail.com> Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11net/sched: sch_fq: fix integer overflow of "credit"Davide Caratti1-0/+22
[ Upstream commit 7041101ff6c3073fd8f2e99920f535b111c929cb ] if sch_fq is configured with "initial quantum" having values greater than INT_MAX, the first assignment of "credit" does signed integer overflow to a very negative value. In this situation, the syzkaller script provided by Cristoph triggers the CPU soft-lockup warning even with few sockets. It's not an infinite loop, but "credit" wasn't probably meant to be minus 2Gb for each new flow. Capping "initial quantum" to INT_MAX proved to fix the issue. v2: validation of "initial quantum" is done in fq_policy, instead of open coding in fq_change() _ suggested by Jakub Kicinski Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377 Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix leaked bpf_link in get_stackid_cannot_attachSong Liu1-0/+1
[ Upstream commit c1e07a80cf23d3a6e96172bc9a73bfa912a9fcbc ] skel->links.oncpu is leaked in one case. This causes test perf_branches fails when it runs after get_stackid_cannot_attach: ./test_progs -t get_stackid_cannot_attach,perf_branches 84 get_stackid_cannot_attach:OK test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146/2 perf_branches/perf_branches_no_hw:OK 146 perf_branches:FAIL All error logs: test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146 perf_branches:FAIL Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED Fix this by adding the missing bpf_link__destroy(). Fixes: 346938e9380c ("selftests/bpf: Add get_stackid_cannot_attach") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Use read_perf_max_sample_freq() in perf_event_stackmapSong Liu4-16/+24
[ Upstream commit de6d014a09bf12a9a8959d60c0a1d4a41d394a89 ] Currently, perf_event sample period in perf_event_stackmap is set too low that the test fails randomly. Fix this by using the max sample frequency, from read_perf_max_sample_freq(). Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK() with if-printf, as CHECK is not available in testing_helpers.c. Fixes: 1da4864c2b20 ("selftests/bpf: Add callchain_stackid") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11bpftool: Fix bug for long instructions in program CFG dumpsQuentin Monnet1-0/+7
[ Upstream commit 67cf52cdb6c8fa6365d29106555dacf95c9fd374 ] When dumping the control flow graphs for programs using the 16-byte long load instruction, we need to skip the second part of this instruction when looking for the next instruction to process. Otherwise, we end up printing "BUG_ld_00" from the kernel disassembler in the CFG. Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Wait for receive in cg_storage_multi testYiFei Zhu1-2/+6
[ Upstream commit 5af607a861d43ffff830fc1890033e579ec44799 ] In some cases the loopback latency might be large enough, causing the assertion on invocations to be run before ingress prog getting executed. The assertion would fail and the test would flake. This can be reliably reproduced by arbitrarily increasing the loopback latency (thanks to [1]): tc qdisc add dev lo root handle 1: htb default 12 tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps tc qdisc add dev lo parent 1:12 netem delay 100ms Fix this by waiting on the receive end, instead of instantly returning to the assert. The call to read() will wait for the default SO_RCVTIMEO timeout of 3 seconds provided by start_server(). [1] https://gist.github.com/kstevens715/4598301 Reported-by: Martin KaFai Lau <martin.lau@linux.dev> Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/ Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress") Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Deflakify STATS_RX_DROPPED testKal Conley1-2/+8
[ Upstream commit 68e7322142f5e731af222892d384d311835db0f1 ] Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after receiving the last (valid) packet which is not the final packet sent in the test (valid and invalid packets are sent in alternating fashion with the final packet being invalid). Since the last packet may or may not have been dropped already, both outcomes must be allowed. This issue could also be fixed by making sure the last packet sent is valid. This alternative is left as an exercise to the reader (or the benevolent maintainers of this file). This problem was quite visible on certain setups. On one machine this failure was observed 50% of the time. Also, remove a redundant assignment of pkt_stream->nb_pkts. This field is already initialized by __pkt_stream_alloc. Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Disable IPv6 on VETH1Kal Conley1-0/+1
[ Upstream commit f2b50f17268390567bc0e95642170d88f336c8f4 ] This change fixes flakiness in the BIDIRECTIONAL test: # [is_pkt_valid] expected length [60], got length [90] not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL When IPv6 is enabled, the interface will periodically send MLDv1 and MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail since it uses VETH0 for RX. For other tests, this was not a problem since they only receive on VETH1 and IPv6 was already disabled on VETH0. Fixes: a89052572ebb ("selftests/bpf: Xsk selftests framework") Signed-off-by: Kal Conley <kal.conley@dectris.com> Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests: xsk: Use correct UMEM size in testapp_invalid_descKal Conley2-5/+5
[ Upstream commit 7a2050df244e2c9a4e90882052b7907450ad10ed ] Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the macro since it's no longer being used. Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11bpf: Add basic bpf_rb_{root,node} supportDave Marchevsky2-6/+17
[ Upstream commit 9c395c1b99bd23f74bc628fa000480c49593d17f ] This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new types, and adds bpf_rb_root_free function for freeing bpf_rb_root in map_values. structs bpf_rb_root and bpf_rb_node are opaque types meant to obscure structs rb_root_cached rb_node, respectively. btf_struct_access will prevent BPF programs from touching these special fields automatically now that they're recognized. btf_check_and_fixup_fields now groups list_head and rb_root together as "graph root" fields and {list,rb}_node as "graph node", and does same ownership cycle checking as before. Note that this function does _not_ prevent ownership type mixups (e.g. rb_root owning list_node) - that's handled by btf_parse_graph_root. After this patch, a bpf program can have a struct bpf_rb_root in a map_value, but not add anything to nor do anything useful with it. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11bpf: Migrate release_on_unlock logic to non-owning ref semanticsDave Marchevsky3-41/+63
[ Upstream commit 6a3cd3318ff65622415e34e8ee39d76331e7c869 ] This patch introduces non-owning reference semantics to the verifier, specifically linked_list API kfunc handling. release_on_unlock logic for refs is refactored - with small functional changes - to implement these semantics, and bpf_list_push_{front,back} are migrated to use them. When a list node is pushed to a list, the program still has a pointer to the node: n = bpf_obj_new(typeof(*n)); bpf_spin_lock(&l); bpf_list_push_back(&l, n); /* n still points to the just-added node */ bpf_spin_unlock(&l); What the verifier considers n to be after the push, and thus what can be done with n, are changed by this patch. Common properties both before/after this patch: * After push, n is only a valid reference to the node until end of critical section * After push, n cannot be pushed to any list * After push, the program can read the node's fields using n Before: * After push, n retains the ref_obj_id which it received on bpf_obj_new, but the associated bpf_reference_state's release_on_unlock field is set to true * release_on_unlock field and associated logic is used to implement "n is only a valid ref until end of critical section" * After push, n cannot be written to, the node must be removed from the list before writing to its fields * After push, n is marked PTR_UNTRUSTED After: * After push, n's ref is released and ref_obj_id set to 0. NON_OWN_REF type flag is added to reg's type, indicating that it's a non-owning reference. * NON_OWN_REF flag and logic is used to implement "n is only a valid ref until end of critical section" * n can be written to (except for special fields e.g. bpf_list_node, timer, ...) Summary of specific implementation changes to achieve the above: * release_on_unlock field, ref_set_release_on_unlock helper, and logic to "release on unlock" based on that field are removed * The anonymous active_lock struct used by bpf_verifier_state is pulled out into a named struct bpf_active_lock. * NON_OWN_REF type flag is introduced along with verifier logic changes to handle non-owning refs * Helpers are added to use NON_OWN_REF flag to implement non-owning ref semantics as described above * invalidate_non_owning_refs - helper to clobber all non-owning refs matching a particular bpf_active_lock identity. Replaces release_on_unlock logic in process_spin_lock. * ref_set_non_owning - set NON_OWN_REF type flag after doing some sanity checking * ref_convert_owning_non_owning - convert owning reference w/ specified ref_obj_id to non-owning references. Set NON_OWN_REF flag for each reg with that ref_obj_id and 0-out its ref_obj_id * Update linked_list selftests to account for minor semantic differences introduced by this patch * Writes to a release_on_unlock node ref are not allowed, while writes to non-owning reference pointees are. As a result the linked_list "write after push" failure tests are no longer scenarios that should fail. * The test##missing_lock##op and test##incorrect_lock##op macro-generated failure tests need to have a valid node argument in order to have the same error output as before. Otherwise verification will fail early and the expected error output won't be seen. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230212092715.1422619-2-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11bpf: Fix __reg_bound_offset 64->32 var_off subreg propagationDaniel Borkmann1-2/+2
[ Upstream commit 7be14c1c9030f73cc18b4ff23b78a0a081f16188 ] Xu reports that after commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following BPF program is rejected by the verifier: 0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit And the verifier log says: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0) 4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0) 6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568 8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15) 9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808 11: (07) r0 += 1 ; R0_w=-9223372036854775807 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809) 13: (b7) r0 = 0 ; R0_w=0 14: (95) exit from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775806 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775810,var_off=(0x8000000000000000; 0xffffffff)) 13: safe [...] from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775794 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775822,umax=9223372036854775822,var_off=(0x8000000000000000; 0xffffffff)) 13: safe from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe [...] The 64bit umin=9223372036854775810 bound continuously bumps by +1 while umax=9223372036854775823 stays as-is until the verifier complexity limit is reached and the program gets finally rejected. During this simulation, the umin also eventually surpasses umax. Looking at the first 'from 12 to 11' output line from the loop, R1 has the following state: R1_w=scalar(umin=0x8000000000000002 (9223372036854775810), umax=0x800000000000000f (9223372036854775823), var_off=(0x8000000000000000; 0xffffffff)) The var_off has technically not an inconsistent state but it's very imprecise and far off surpassing 64bit umax bounds whereas the expected output with refined known bits in var_off should have been like: R1_w=scalar(umin=0x8000000000000002 (9223372036854775810), umax=0x800000000000000f (9223372036854775823), var_off=(0x8000000000000000; 0xf)) In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff) and does not converge into a narrower mask where more bits become known, eventually transforming R1 into a constant upon umin=9223372036854775823, umax=9223372036854775823 case where the verifier would have terminated and let the program pass. The __reg_combine_64_into_32() marks the subregister unknown and propagates 64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within the 32bit universe. The question came up whether __reg_combine_64_into_32() should special case the situation that when 64bit {s,u}min bounds have the same value as 64bit {s,u}max bounds to then assign the latter as well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the above example however, that is just /one/ special case and not a /generic/ solution given above example would still not be addressed this way and remain at an imprecise var_off=(0x8000000000000000; 0xffffffff). The improvement is needed in __reg_bound_offset() to refine var32_off with the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync() code first refines information about the register's min/max bounds via __update_reg_bounds() from the current var_off, then in __reg_deduce_bounds() from sign bit and with the potentially learned bits from bounds it'll update the var_off tnum in __reg_bound_offset(). For example, intersecting with the old var_off might have improved bounds slightly, e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then result in (0; 0x7f...fc). The intersected var64_off holds then the universe which is a superset of var32_off. The point for the latter is not to broaden, but to further refine known bits based on the intersection of var_off with 32 bit bounds, so that we later construct the final var_off from upper and lower 32 bits. The final __update_reg_bounds() can then potentially still slightly refine bounds if more bits became known from the new var_off. After the improvement, we can see R1 converging successively: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0) 3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0) 4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0) 6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568 8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15) 9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808 11: (07) r0 += 1 ; R0_w=-9223372036854775807 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809) 13: (b7) r0 = 0 ; R0_w=0 14: (95) exit from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775806 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=-9223372036854775806 13: safe from 12 to 11: R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775811,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775805 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775805 R1_w=-9223372036854775805 13: safe [...] from 12 to 11: R0_w=-9223372036854775798 R1=scalar(umin=9223372036854775819,umax=9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775797 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775797 R1=-9223372036854775797 13: safe from 12 to 11: R0_w=-9223372036854775797 R1=scalar(umin=9223372036854775820,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775796 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775796 R1=-9223372036854775796 13: safe from 12 to 11: R0_w=-9223372036854775796 R1=scalar(umin=9223372036854775821,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775795 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775795 R1=-9223372036854775795 13: safe from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775794 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=-9223372036854775794 13: safe from 12 to 11: R0_w=-9223372036854775794 R1=-9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 last_idx 12 first_idx 12 parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=scalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 last_idx 11 first_idx 11 regs=1 stack=0 before 11: (07) r0 += 1 parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=scalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 last_idx 12 first_idx 0 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=1 stack=0 before 11: (07) r0 += 1 regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000 last_idx 12 first_idx 12 parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=Pscalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0 last_idx 11 first_idx 11 regs=2 stack=0 before 11: (07) r0 += 1 parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=Pscalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0 last_idx 12 first_idx 0 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2 regs=2 stack=0 before 11: (07) r0 += 1 regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000 regs=2 stack=0 before 8: (0f) r1 += r0 regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10 regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0) 13: safe from 4 to 13: safe verification time 322 usec stack depth 0 processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1 This also fixes up a test case along with this improvement where we match on the verifier log. The updated log now has a refined var_off, too. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Xu Kuohai <xukuohai@huaweicloud.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11libbpf: Fix ld_imm64 copy logic for ksym in light skeleton.Alexei Starovoitov1-4/+6
[ Upstream commit a506d6ce1dd184051037dc9d26c3eb187c9fe625 ] Unlike normal libbpf the light skeleton 'loader' program is doing btf_find_by_name_kind() call at run-time to find ksym in the kernel and populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the search multiple times for the same ksym it remembers the first patched ld_imm64 insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn. Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag. Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA to clarify the code. Fixes: d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/bpf: Fix a fd leak in an error path in network_helpers.cMartin KaFai Lau1-1/+1
[ Upstream commit 226efec2b0efad60d4a6c4b2c3a8710dafc4dc21 ] In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails. This patch fixes it. Fixes: eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11tools: bpftool: Remove invalid \' json escapeLuis Gerhorst1-3/+0
[ Upstream commit c679bbd611c08b0559ffae079330bc4e5574696a ] RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid two-character escape sequences. This does not include \', which is not required in JSON because it exclusively uses double quotes as string separators. Solidus (/) may be escaped, but does not have to. Only reverse solidus (\), double quotes ("), and the control characters have to be escaped. Therefore, with this fix, bpftool correctly supports all valid two-character escape sequences (but still does not support characters that require multi-character escape sequences). Witout this fix, attempting to load a JSON file generated by bpftool using Python 3.10.6's default json.load() may fail with the error "Invalid \escape" if the file contains the invalid escaped single quote (\'). Fixes: b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository") Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007Terry Bowman1-2/+2
[ Upstream commit 4e347bdf44c1fd4296a7b9657a2c0e1bd900fa50 ] Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to be bit 31. Fixes: c6b2f240bf8d ("tools/x86: Add a kcpuid tool to show raw CPU features") Signed-off-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Check for return value after write_schemata()Ilpo Järvinen1-1/+6
[ Upstream commit 0d45c83b95da414e98ad333e723141a94f6e2c64 ] MBA test case writes schemata but it does not check if the write is successful or not. Add the error check and return error properly. Fixes: 01fee6b4d1f9 ("selftests/resctrl: Add MBA test") Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Allow ->setup() to return errorsIlpo Järvinen7-6/+12
[ Upstream commit fa10366cc6f4cc862871f8938426d85c2481f084 ] resctrl_val() assumes ->setup() always returns either 0 to continue tests or < 0 in case of the normal termination of tests after x runs. The latter overlaps with normal error returns. Define END_OF_TESTS (=1) to differentiate the normal termination of tests and return errors as negative values. Alter callers of ->setup() to handle errors properly. Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest") Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Move ->setup() call outside of test specific branchesIlpo Järvinen1-13/+6
[ Upstream commit c90b3b588e369c20087699316259fa5ebbb16f2d ] resctrl_val() function is called only by MBM, MBA, and CMT tests which means the else branch is never used. Both test branches call param->setup(). Remove the unused else branch and place the ->setup() call outside of the test specific branches reducing code duplication. Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc memIlpo Järvinen1-0/+2
[ Upstream commit 22a8be280383812235131dda18a8212a59fadd2d ] malloc_and_init_memory() in fill_buf isn't checking if memalign() successfully allocated memory or not before accessing the memory. Check the return value of memalign() and return NULL if allocating aligned memory fails. Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark") Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11selftests mount: Fix mount_setattr_test builds failedAnh Tuan Phan1-0/+1
[ Upstream commit f1594bc676579133a3cd906d7d27733289edfb86 ] When compiling selftests with target mount_setattr I encountered some errors with the below messages: mount_setattr_test.c: In function ‘mount_setattr_thread’: mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type 343 | struct mount_attr attr = { | ^~~~~~~~~~ These errors might be because of linux/mount.h is not included. This patch resolves that issue. Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26tools/mm/page_owner_sort.c: fix TGID output when cull=tg is usedSteve Chou1-1/+1
commit 9235756885e865070c4be2facda75262dbd85967 upstream. When using cull option with 'tg' flag, the fprintf is using pid instead of tgid. It should use tgid instead. Link: https://lkml.kernel.org/r/20230411034929.2071501-1-steve_chou@pesi.com.tw Fixes: 9c8a0a8e599f4a ("tools/vm/page_owner_sort.c: support for user-defined culling rules") Signed-off-by: Steve Chou <steve_chou@pesi.com.tw> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-26selftests: sigaltstack: fix -WuninitializedNick Desaulniers2-6/+24
[ Upstream commit 05107edc910135d27fe557267dc45be9630bf3dd ] Building sigaltstack with clang via: $ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/ produces the following warning: warning: variable 'sp' is uninitialized when used here [-Wuninitialized] if (sp < (unsigned long)sstack || ^~ Clang expects these to be declared at global scope; we've fixed this in the kernel proper by using the macro `current_stack_pointer`. This is defined in different headers for different target architectures, so just create a new header that defines the arch-specific register names for the stack pointer register, and define it for more targets (at least the ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER). Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/ Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20selftests: mptcp: userspace pm: uniform verify eventsMatthieu Baerts1-0/+2
commit 711ae788cbbb82818531b55e32b09518ee09a11a upstream. Simply adding a "sleep" before checking something is usually not a good idea because the time that has been picked can not be enough or too much. The best is to wait for events with a timeout. In this selftest, 'sleep 0.5' is used more than 40 times. It is always used before calling a 'verify_*' function except for this verify_listener_events which has been added later. At the end, using all these 'sleep 0.5' seems to work: the slow CIs don't complain so far. Also because it doesn't take too much time, we can just add two more 'sleep 0.5' to uniform what is done before calling a 'verify_*' function. For the same reasons, we can also delay a bigger refactoring to replace all these 'sleep 0.5' by functions waiting for events instead of waiting for a fix time and hope for the best. Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20maple_tree: fix write memory barrier of nodes once dead for RCU modeLiam R. Howlett1-0/+16
[ Upstream commit c13af03de46ba27674dd9fb31a17c0d480081139 ] During the development of the maple tree, the strategy of freeing multiple nodes changed and, in the process, the pivots were reused to store pointers to dead nodes. To ensure the readers see accurate pivots, the writers need to mark the nodes as dead and call smp_wmb() to ensure any readers can identify the node as dead before using the pivot values. There were two places where the old method of marking the node as dead without smp_wmb() were being used, which resulted in RCU readers seeing the wrong pivot value before seeing the node was dead. Fix this race condition by using mte_set_node_dead() which has the smp_wmb() call to ensure the race is closed. Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed are marked as dead to ensure there are no other call paths besides the two updated paths. This is necessary for the RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20selftests/bpf: Fix progs/find_vma_fail1.c build error.Alexei Starovoitov1-0/+1
[ Upstream commit 32513d40d908b267508d37994753d9bd1600914b ] The commit 11e456cae91e ("selftests/bpf: Fix compilation errors: Assign a value to a constant") fixed the issue cleanly in bpf-next. This is an alternative fix in bpf tree to avoid merge conflict between bpf and bpf-next. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20selftests: add the missing CONFIG_IP_SCTP in net configXin Long1-0/+1
[ Upstream commit 3a0385be133e7091cc9a9a998c7ec712bb9585db ] The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20selftests: openvswitch: adjust datapath NL message declarationAaron Conole1-1/+1
[ Upstream commit 306dc21361993f4fe50a15d4db6b1a4de5d0adb0 ] The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Signed-off-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-29 20:39:00 +0300