summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2023-08-10selftests/seccomp: Handle arm32 corner cases betterKees Cook1-1/+11
It turns out arm32 doesn't handle syscall -1 gracefully, so skip testing for that. Additionally skip tests that depend on clone3 when it is not available (for example when building the seccomp selftests on an old arm image without clone3 headers). And improve error reporting for when nanosleep fails, as seen on arm32 since v5.15. Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2023-08-10Merge tag 'net-6.5-rc6' of ↵Linus Torvalds18-52/+245
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wireless and bpf. Still trending up in size but the good news is that the "current" regressions are resolved, AFAIK. We're getting weirdly many fixes for Wake-on-LAN and suspend/resume handling on embedded this week (most not merged yet), not sure why. But those are all for older bugs. Current release - regressions: - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data over to TCP Current release - new code bugs: - eth: mlx5: correct IDs on VFs internal to the device (IPU) Previous releases - regressions: - phy: at803x: fix WoL support / reporting on AR8032 - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from slaves, leading to BUG_ON() - tun: prevent tun_build_skb() from exceeding the packet size limit - wifi: rtw89: fix 8852AE disconnection caused by RX full flags - eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor firmware's device disabled status"), keep PCI devices around even if they are disabled / not going to be probed to be able to apply quirks on them - eth: prestera: fix handling IPv4 routes with nexthop IDs Previous releases - always broken: - netfilter: re-work garbage collection to avoid races between user-facing API and timeouts - tunnels: fix generating ipv4 PMTU error on non-linear skbs - nexthop: fix infinite nexthop bucket dump when using maximum nexthop ID - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems() Misc: - unix: use consistent error code in SO_PEERPIDFD - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for upcoming IETF RFC" * tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) net: hns3: fix strscpy causing content truncation issue net: tls: set MSG_SPLICE_PAGES consistently ibmvnic: Ensure login failure recovery is safe from other resets ibmvnic: Do partial reset on login failure ibmvnic: Handle DMA unmapping of login buffs in release functions ibmvnic: Unmap DMA login rsp buffer on send login fail ibmvnic: Enforce stronger sanity checks on login response net: mana: Fix MANA VF unload when hardware is unresponsive netfilter: nf_tables: remove busy mark and gc batch API netfilter: nft_set_hash: mark set element as dead when deleting from packet path netfilter: nf_tables: adapt set backend to use GC transaction API netfilter: nf_tables: GC transaction API to avoid race with control plane selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ipv6: adjust ndisc_is_useropt() to also return true for PIO selftests: forwarding: bridge_mdb: Make test more robust selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet ...
2023-08-10Merge tag 'for-netdev' of ↵Jakub Kicinski2-1/+87
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-09 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 6 files changed, 102 insertions(+), 8 deletions(-). The main changes are: 1) A bpf sockmap memleak fix and a fix in accessing the programs of a sockmap under the incorrect map type from Xu Kuohai. 2) A refcount underflow fix in xsk from Magnus Karlsson. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ==================== Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests/bpf: Add sockmap test for redirecting partial skb dataXu Kuohai2-0/+86
Add a test case to check whether sockmap redirection works correctly when data length returned by stream_parser is less than skb->len. In addition, this test checks whether strp_done is called correctly. The reason is that we returns skb->len - 1 from the stream_parser, so the last byte in the skb will be held by strp->skb_head. Therefore, if strp_done is not called to free strp->skb_head, we'll get a memleak warning. Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-10selftests/bpf: fix a CI failure caused by vsock sockmap testXu Kuohai1-1/+1
BPF CI has reported the following failure: Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11 vsock_unix_redir_connectible:FAIL:1514 ./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b vsock_unix_redir_connectible:FAIL:1518 ./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0 It’s because the recv(... MSG_DONTWAIT) syscall in the test case is called before the queued work sk_psock_backlog() in the kernel finishes executing. So the data to be read is still queued in psock->ingress_skb and cannot be read by the user program. Therefore, the non-blocking recv() reads nothing and reports an EAGAIN error. So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls select() to wait for data to be readable or timeout before calls recv(). Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-10selftests/tc-testing: verify that a qdisc can be grafted onto a taprio classVladimir Oltean1-0/+50
The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the patch it reverted caused a crash when attaching a CBS shaper to one of the taprio classes. Prevent that from happening again by adding a test case for it, which now passes correctly in both offload and software modes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests/tc-testing: test that taprio can only be attached as rootVladimir Oltean2-0/+66
Check that the "Can only be attached as root qdisc" error message from taprio is effective by attempting to attach it to a class of another taprio qdisc. That operation should fail. In the bug that was squashed by change "net/sched: taprio: try again to report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root software taprio would be misinterpreted as a change() to the root taprio. Catch this by looking at whether the base-time of the root taprio has changed to follow the base-time of the child taprio, something which should have absolutely never happened assuming correct semantics. Vinicius points out that looking at "base_time" in the tc qdisc show output is unreliable because user space is in a race with the kernel applying the setting. So we create a helper bash script which waits while there is any pending schedule. Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230807193324.4128292-11-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests/tc-testing: add ptp_mock Kconfig dependencyVladimir Oltean1-1/+2
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver is used. Suggested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-10-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10net/sched: taprio: dump class stats for the actual q->qdiscs[]Vladimir Oltean1-1/+1
This makes a difference for the software scheduling mode, where dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself, but when we're talking about what Qdisc and stats get reported for a traffic class, the root taprio isn't what comes to mind, but q->qdiscs[] is. To understand the difference, I've attempted to send 100 packets in software mode through class 8001:5, and recorded the stats before and after the change. Here is before: $ tc -s class show dev eth0 class taprio 8001:1 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 and here is after: class taprio 8001:1 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 800d: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 The most glaring (and expected) difference is that before, all class stats reported the global stats, whereas now, they really report just the counters for that traffic class. Finally, Pedro Tammela points out that there is a tc selftest which checks specifically which handle do the child Qdiscs corresponding to each class have. That's changing here - taprio no longer reports tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0 (the handle of the default pfifo child Qdiscs). Since iproute2 does not print a child Qdisc handle of 0, adjust the test's expected output. Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: mlxsw: router_bridge_lag: Add a new selftestPetr Machata1-0/+50
Add a selftest to verify enslavement to a LAG with upper after fresh devlink reload. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/373a7754daa4dac32759a45095f47b08a2a869c8.1691498735.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb: Make test more robustIdo Schimmel1-4/+4
Some test cases check that the group timer is (or isn't) 0. Instead of grepping for "0.00" grep for " 0.00" as the former can also match "260.00" which is the default group membership interval. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb_max: Fix failing test with old libnetIdo Schimmel1-4/+10
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-17-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb: Fix failing test with old libnetIdo Schimmel1-22/+24
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_flower_l2_miss: Fix failing test with old libnetIdo Schimmel1-5/+8
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-15-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_tunnel_key: Make filters more specificIdo Schimmel1-3/+6
The test installs filters that match on various IP fragments (e.g., no fragment, first fragment) and expects a certain amount of packets to hit each filter. This is problematic as the filters are not specific enough and can match IP packets (e.g., IGMP) generated by the stack, resulting in failures [1]. Fix by making the filters more specific and match on more fields in the IP header: Source IP, destination IP and protocol. [1] # timeout set to 0 # selftests: net/forwarding: tc_tunnel_key.sh # TEST: tunnel_key nofrag (skip_hw) [FAIL] # packet smaller than MTU was not tunneled # INFO: Could not test offloaded functionality not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1 Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-14-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_flower: Relax success criterionIdo Schimmel1-4/+4
The test checks that filters that match on source or destination MAC were only hit once. A host can send more than one packet with a given source or destination MAC, resulting in failures. Fix by relaxing the success criterion and instead check that the filters were not hit zero times. Using tc_check_at_least_x_packets() is also an option, but it is not available in older kernels. Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_actions: Use ncat instead of ncIdo Schimmel1-2/+4
The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supportedIdo Schimmel1-5/+13
MAC Merge cannot be tested with veth pairs, resulting in failures: # ./ethtool_mm.sh [...] TEST: Manual configuration with verification: swp1 to swp2 [FAIL] Verification did not succeed Fix by skipping the test when the interfaces do not support MAC Merge. Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairsIdo Schimmel1-0/+2
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool_extended_state: Skip when using veth pairsIdo Schimmel1-0/+2
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool: Skip when using veth pairsIdo Schimmel1-0/+2
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Add a helper to skip test when using veth pairsIdo Schimmel1-0/+11
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Set default IPv6 traceroute utilityIdo Schimmel2-0/+3
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb_max: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Switch off timeoutIdo Schimmel1-0/+1
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf: Switch off timeout"). Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Skip test when no interfaces are specifiedIdo Schimmel1-0/+5
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop bucket dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e54fc ("net: Initial nexthop code") Reported-by: Petr Machata <petrm@nvidia.com> Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests/bpf: relax expected log messages to allow emitting BPF_STEduard Zingerman2-6/+33
Update [1] to LLVM BPF backend seeks to enable generation of BPF_ST instruction when CPUv4 is selected. This affects expected log messages for the following selftests: - log_fixup/missing_map - spin_lock/lock_id_mapval_preserve - spin_lock/lock_id_innermapval_preserve Expected messages in these tests hard-code instruction numbers for BPF programs compiled from C. These instruction numbers change when BPF_ST is allowed because single BPF_ST instruction replaces a pair of BPF_MOV/BPF_STX instructions, e.g.: r1 = 42; *(u32 *)(r10 - 8) = r1; ---> *(u32 *)(r10 - 8) = 42; This commit updates expected log messages to avoid matching specific instruction numbers (program position still could be uniquely identified). [1] https://reviews.llvm.org/D140804 "[BPF] support for BPF_ST instruction in codegen" Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230808162755.392606-1-eddyz87@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-09selftests/bpf: remove duplicated functionsKui-Feng Lee1-76/+17
The file cgroup_tcp_skb.c contains redundant implementations of the similar functions (create_server_sock_v6(), connect_client_server_v6() and get_sock_port_v6()) found in network_helpers.c. Let's eliminate these duplicated functions. Changes from v1: - Remove get_sock_port_v6() as well. v1: https://lore.kernel.org/all/20230807193840.567962-1-thinker.li@gmail.com/ Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20230808162858.326871-1-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-08selftests/rseq: Use rseq_unqual_scalar_typeof in macrosMathieu Desnoyers6-13/+13
Use rseq_unqual_scalar_typeof() rather than typeof() in macros to remove the volatile qualifier (if there is one in the input argument), thus generating better assembly code in those scenarios. Also add extra brackets around the "p" parameter in RSEQ_READ_ONCE(), RSEQ_WRITE_ONCE(), and rseq_unqual_scalar_typeof() across architectures to preserve expectations of operator priority. Here is an example that shows how operator priority may be an issue with missing parentheses: #define m(p) \ do { \ __typeof__(*p) v = 0; \ } while (0) void fct(unsigned long long *p1) { m(p1 + 1); /* works */ m(1 + p1); /* broken */ } Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-08-08selftests/rseq: Fix arm64 buggy load-acquire/store-release macrosMathieu Desnoyers1-28/+30
The arm64 load-acquire/store-release macros from the Linux kernel rseq selftests are buggy. Remplace them by a working implementation. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-08-08selftests/rseq: Implement rseq_unqual_scalar_typeofMathieu Desnoyers1-0/+26
Allow defining variables and perform cast with a typeof which removes the volatile and const qualifiers. This prevents declaring a stack variable with a volatile qualifier within a macro, which would generate sub-optimal assembler. This is imported from the "librseq" project. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-08-08selftests/rseq: Fix CID_ID typo in MakefileMathieu Desnoyers1-1/+1
Ensure that the basic percpu ops tests are effectively built against mm_cid. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-08-08selftests/bpf: Add bpf_get_func_ip test for uprobe inside functionJiri Olsa2-4/+60
Adding get_func_ip test for uprobe inside function that validates the get_func_ip helper returns correct probe address value. Tested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230807085956.2344866-4-jolsa@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-08selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entryJiri Olsa2-2/+34
Adding get_func_ip tests for uprobe on function entry that validates that bpf_get_func_ip returns proper values from both uprobe and return uprobe. Tested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230807085956.2344866-3-jolsa@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-08selftests/bpf: Add a movsx selftest for sign-extension of R10Yonghong Song1-0/+22
A movsx selftest is added for sign-extension of frame pointer R10. The verification fails for both privileged and unprivileged prog runs. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230807175726.672394-1-yonghong.song@linux.dev Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+5
Pull kvm fixes from Paolo Bonzini: "x86: - Fix SEV race condition ARM: - Fixes for the configuration of SVE/SME traps when hVHE mode is in use - Allow use of pKVM on systems with FF-A implementations that are v1.0 compatible - Request/release percpu IRQs (arch timer, vGIC maintenance) correctly when pKVM is in use - Fix function prototype after __kvm_host_psci_cpu_entry() rename - Skip to the next instruction when emulating writes to TCR_EL1 on AmpereOne systems Selftests: - Fix missing include" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests/rseq: Fix build with undefined __weak KVM: SEV: remove ghcb variable declarations KVM: SEV: only access GHCB fields once KVM: SEV: snapshot the GHCB before accessing it KVM: arm64: Skip instruction after emulating write to TCR_EL1 KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype KVM: arm64: Fix resetting SME trap values on reset for (h)VHE KVM: arm64: Fix resetting SVE trap values on reset for hVHE KVM: arm64: Use the appropriate feature trap register when activating traps KVM: arm64: Helper to write to appropriate feature trap register based on mode KVM: arm64: Disable SME traps for (h)VHE at setup KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup KVM: arm64: Factor out code for checking (h)VHE mode into a macro KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp KVM: arm64: Fix hardware enable/disable flows for pKVM KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
2023-08-06selftests/nolibc: restore the failed tests printZhangjin Wu1-1/+1
The commit fa0df56a804b ("selftests/nolibc: also count skipped and failed tests in output") added counting for the skipped and failed tests, but also removed the 'FAIL' results print, let's restore it for it really allow users to learn the failed details without opening the log file. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06selftests/nolibc: always print the path to test log fileZhangjin Wu1-2/+2
Even when there is no failure, developers may be still interested in the test log file, especially, string alignment, duplicated print, kernel message and so forth, so, always print the path to test log file. A new line is added for such a print to avoid annoying people who don't care about it when the test pass completely. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06selftests/nolibc: add a standalone test report macroZhangjin Wu1-12/+7
The run-user, run and rerun targets use the same test report script, let's add a standalone test report macro for them. This shrinks code lines and simplify the future maintainability. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-05selftests: fchmodat2: remove duplicate unneeded definesMuhammad Usama Anjum2-21/+1
These duplicate defines should automatically be picked up from kernel headers. Use KHDR_INCLUDES to add kernel header files. Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Message-Id: <20230805073809.1753462-4-usama.anjum@collabora.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-05selftests: mptcp: join: fix 'implicit EP' testAndrea Claudi1-2/+3
mptcp_join 'implicit EP' test currently fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' Error: too many addresses or duplicate one: -22. ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal ' This happens because of two reasons: - iproute v6.3.0 does not support the implicit flag, fixed with iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit flag") - pm_nl_check_endpoint wrongly expects the ip address to be repeated two times in iproute output, and does not account for a final whitespace in it. This fixes the issue trimming the whitespace in the output string and removing the double address in the expected string. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05selftests: mptcp: join: fix 'delete and re-add' testAndrea Claudi1-0/+1
mptcp_join 'delete and re-add' test fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 002 delete and re-add before delete[ ok ] mptcp_info subflows=1 [ ok ] Error: argument "ADDRESS" is wrong: invalid for non-zero id address after delete[fail] got 2:2 subflows expected 1 This happens because endpoint delete includes an ip address while id is not 0, contrary to what is indicated in the ip mptcp man page: "When used with the delete id operation, an IFADDR is only included when the ID is 0." This fixes the issue using the $addr variable in pm_nl_del_endpoint() only when id is 0. Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05selftests: net: test vxlan pmtu exceptions with tcpFlorian Westphal1-0/+35
TCP might get stuck if a nonlinear skb exceeds the path MTU, icmp error contains an incorrect icmp checksum in that case. Extend the existing test for vxlan to also send at least 1MB worth of data via TCP in addition to the existing 'large icmp packet adds route exception'. On my test VM this fails due to 0-size output file without "tunnels: fix kasan splat when generating ipv4 pmtu error". Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05Merge tag 'riscv-for-linus-6.5-rc5' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of fixes for build-related failures in the selftests - A fix for a sparse warning in acpi_os_ioremap() - A fix to restore the kernel PA offset in vmcoreinfo, to fix crash handling * tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: kdump: Add va_kernel_pa_offset for RISCV64 riscv: Export va_kernel_pa_offset in vmcoreinfo RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address selftests: riscv: Fix compilation error with vstate_exec_nolibc.c selftests/riscv: fix potential build failure during the "emit_tests" step
2023-08-05selftests/rseq: Fix build with undefined __weakMark Brown2-1/+5
Commit 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") which is now in Linus' tree introduced uses of __weak but did nothing to ensure that a definition is provided for it resulting in build failures for the rseq tests: rseq.c:41:1: error: unknown type name '__weak' __weak ptrdiff_t __rseq_offset; ^ rseq.c:41:17: error: expected ';' after top level declarator __weak ptrdiff_t __rseq_offset; ^ ; rseq.c:42:1: error: unknown type name '__weak' __weak unsigned int __rseq_size; ^ rseq.c:43:1: error: unknown type name '__weak' __weak unsigned int __rseq_flags; Fix this by using the definition from tools/include compiler.h. Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Signed-off-by: Mark Brown <broonie@kernel.org> Message-Id: <20230804-kselftest-rseq-build-v1-1-015830b66aa9@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-04selftests: cgroup: fix test_kmem_basic false positivesJohannes Weiner1-0/+4
This test fails routinely in our prod testing environment, and I can reproduce it locally as well. The test allocates dcache inside a cgroup, then drops the memory limit and checks that usage drops correspondingly. The reason it fails is because dentries are freed with an RCU delay - a debugging sleep shows that usage drops as expected shortly after. Insert a 1s sleep after dropping the limit. This should be good enough, assuming that machines running those tests are otherwise not very busy. Link: https://lkml.kernel.org/r/20230801135632.1768830-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-04selftests: mm: ksm: fix incorrect evaluation of parameterAyush Jain1-0/+1
A missing break in kms_tests leads to kselftest hang when the parameter -s is used. In current code flow because of missing break in -s, -t parses args spilled from -s and as -t accepts only valid values as 0,1 so any arg in -s >1 or <0, gets in ksm_test failure This went undetected since, before the addition of option -t, the next case -M would immediately break out of the switch statement but that is no longer the case Add the missing break statement. ----Before---- ./ksm_tests -H -s 100 Invalid merge type ----After---- ./ksm_tests -H -s 100 Number of normal pages: 0 Number of huge pages: 50 Total size: 100 MiB Total time: 0.401732682 s Average speed: 248.922 MiB/s Link: https://lkml.kernel.org/r/20230728163952.4634-1-ayush.jain3@amd.com Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM") Signed-off-by: Ayush Jain <ayush.jain3@amd.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Stefan Roesch <shr@devkernel.io> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 16:39:56 +0300