summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
41 hoursselftests/hid: fix compilation when bpf_wq and hid_device are not exportedBenjamin Tissoires1-0/+12
commit 5d4c6c132ea9a967d48890dd03e6a786c060e968 upstream. This can happen in situations when CONFIG_HID_SUPPORT is set to no, or some complex situations where struct bpf_wq is not exported. So do the usual dance of hiding them before including vmlinux.h, and then redefining them and make use of CO-RE to have the correct offsets. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202603111558.KLCIxsZB-lkp@intel.com/ Fixes: fe8d561db3e8 ("selftests/hid: add wq test for hid_bpf_input_report()") Cc: stable@vger.kernel.org Acked-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
41 hoursselftests: mptcp: join: check RM_ADDR not sent over same subflowMatthieu Baerts (NGI0)1-0/+36
[ Upstream commit 560edd99b5f58b2d4bbe3c8e51e1eed68d887b0e ] This validates the previous commit: RM_ADDR were sent over the first found active subflow which could be the same as the one being removed. It is more likely to loose this notification. For this check, RM_ADDR are explicitly dropped when trying to send them over the initial subflow, when removing the endpoint attached to it. If it is dropped, the test will complain because some RM_ADDR have not been received. Note that only the RM_ADDR are dropped, to allow the linked subflow to be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte code is used. If the IPTables commands fail, that's OK, the tests will continue to pass, but not validate this part. This can be ignored: another subtest fully depends on such command, and will be marked as skipped. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 8dd5efb1f91b ("mptcp: send ack for rm_addr") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
41 hoursselftests: mptcp: add a check for 'add_addr_accepted'Gang Yan1-0/+7
[ Upstream commit 0eee0fdf9b7b0baf698f9b426384aa9714d76a51 ] The previous patch fixed an issue with the 'add_addr_accepted' counter. This was not spot by the test suite. Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add signal' test. This should help spotting similar regressions later on. These counters are crucial for ensuring the MPTCP path manager correctly handles the subflow creation via 'ADD_ADDR'. Signed-off-by: Gang Yan <yangang@kylinos.cn> Reviewed-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 560edd99b5f5 ("selftests: mptcp: join: check RM_ADDR not sent over same subflow") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysselftest/arm64: Fix sve2p1_sigill() to hwcap testYifan Wu1-2/+2
[ Upstream commit d87c828daa7ead9763416f75cc416496969cf1dc ] The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However, the BFADD requires the FEAT_SVE_B16B16, which is indicated by ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16. LD1Q Gather load quadwords which is decoded from SVE encodings and implied by FEAT_SVE2p1. Fixes: c5195b027d29 ("kselftest/arm64: Add SVE 2.1 to hwcap test") Signed-off-by: Yifan Wu <wuyifan50@huawei.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysselftests/harness: order TEST_F and XFAIL_ADD constructorsSun Jian1-2/+5
[ Upstream commit 6be2681514261324c8ee8a1c6f76cefdf700220f ] TEST_F() allocates and registers its struct __test_metadata via mmap() inside its constructor, and only then assigns the _##fixture_##test##_object pointer. XFAIL_ADD() runs in a constructor too and reads _##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs first, xfail->test can be NULL and the expected failure will be reported as FAIL. Use constructor priorities to ensure TEST_F registration runs before XFAIL_ADD, without adding extra state or runtime lookups. Fixes: 2709473c9386 ("selftests: kselftest_harness: support using xfail") Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 dayskselftest/harness: Use helper to avoid zero-size memset warningWake Liu1-1/+7
[ Upstream commit 19b8a76cd99bde6d299e60490f3e62b8d3df3997 ] When building kselftests with a toolchain that enables source fortification (e.g., Android's build environment, which uses -D_FORTIFY_SOURCE=3), a build failure occurs in tests that use an empty FIXTURE(). The root cause is that an empty fixture struct results in `sizeof(self_private)` evaluating to 0. The compiler's fortification checks then detect the `memset()` call with a compile-time constant size of 0, issuing a `-Wuser-defined-warnings` which is promoted to an error by `-Werror`. An initial attempt to guard the call with `if (sizeof(self_private) > 0)` was insufficient. The compiler's static analysis is aggressive enough to flag the `memset(..., 0)` pattern before evaluating the conditional, thus still triggering the error. To resolve this robustly, this change introduces a `static inline` helper function, `__kselftest_memset_safe()`. This function wraps the size check and the `memset()` call. By replacing the direct `memset()` in the `__TEST_F_IMPL` macro with a call to this helper, we create an abstraction boundary. This prevents the compiler's static analyzer from "seeing" the problematic pattern at the macro expansion site, resolving the build failure. Build Context: Compiler: Android (14488419, +pgo, +bolt, +lto, +mlgo, based on r584948) clang version 22.0.0 (https://android.googlesource.com/toolchain/llvm-project 2d65e4108033380e6fe8e08b1f1826cd2bfb0c99) Relevant Options: -O2 -Wall -Werror -D_FORTIFY_SOURCE=3 -target i686-linux-android10000 Test: m kselftest_futex_futex_requeue_pi Removed Gerrit Change-Id Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20251224084120.249417-1-wakel@google.com Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: 6be268151426 ("selftests/harness: order TEST_F and XFAIL_ADD constructors") Signed-off-by: Sasha Levin <sashal@kernel.org>
13 dayskunit: tool: copy caller args in run_kernel to prevent mutationShuvam Pandey2-2/+30
[ Upstream commit 40804c4974b8df2adab72f6475d343eaff72b7f6 ] run_kernel() appended KUnit flags directly to the caller-provided args list. When exec_tests() calls run_kernel() repeatedly (e.g. with --run_isolated), each call mutated the same list, causing later runs to inherit stale filter_glob values and duplicate kunit.enable flags. Fix this by copying args at the start of run_kernel(). Add a regression test that calls run_kernel() twice with the same list and verifies the original remains unchanged. Fixes: ff9e09a3762f ("kunit: tool: support running each suite/test separately") Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com> Reviewed-by: David Gow <david@davidgow.net> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
13 daysselftests: mptcp: join: check removing signal+subflow endpMatthieu Baerts (NGI0)1-0/+13
commit 1777f349ff41b62dfe27454b69c27b0bc99ffca5 upstream. This validates the previous commit: endpoints with both the signal and subflow flags should always be marked as used even if it was not possible to create new subflows due to the MPTCP PM limits. For this test, an extra endpoint is created with both the signal and the subflow flags, and limits are set not to create extra subflows. In this case, an ADD_ADDR is sent, but no subflows are created. Still, the local endpoint is marked as used, and no warning is fired when removing the endpoint, after having sent a RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 daysselftests: mptcp: more stable simult_flows testsPaolo Abeni1-4/+7
commit 8c09412e584d9bcc0e71d758ec1008d1c8d1a326 upstream. By default, the netem qdisc can keep up to 1000 packets under its belly to deal with the configured rate and delay. The simult flows test-case simulates very low speed links, to avoid problems due to slow CPUs and the TCP stack tend to transmit at a slightly higher rate than the (virtual) link constraints. All the above causes a relatively large amount of packets being enqueued in the netem qdiscs - the longer the transfer, the longer the queue - producing increasingly high TCP RTT samples and consequently increasingly larger receive buffer size due to DRS. When the receive buffer size becomes considerably larger than the needed size, the tests results can flake, i.e. because minimal inaccuracy in the pacing rate can lead to a single subflow usage towards the end of the connection for a considerable amount of data. Address the issue explicitly setting netem limits suitable for the configured link speeds and unflake all the affected tests. Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-04selftests/mm/charge_reserved_hugetlb: drop mount size for hugetlbfsLi Wang1-2/+2
[ Upstream commit 1aa1dd9cc595917882fb6db67725442956f79607 ] charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a fixed size of 256M. On systems with large base hugepages (e.g. 512MB), this is smaller than a single hugepage, so the hugetlbfs mount ends up with zero capacity (often visible as size=0 in mount output). As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang waiting for progress. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... # mount |grep /mnt/huge none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0) # grep -i huge /proc/meminfo ... HugePages_Total: 10 HugePages_Free: 10 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 524288 kB Hugetlb: 5242880 kB Drop the mount args with 'size=256M', so the filesystem capacity is sufficient regardless of HugeTLB page size. Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: forwarding: vxlan_bridge_1d_ipv6: fix test failure with ↵Aleksei Oladko1-1/+1
br_netfilter enabled [ Upstream commit ce9f6aec0fb780dafc1dfc5f47c688422aff464a ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv6 packet has an incorrect payload length set in the IPv6 header. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by setting the correct IPv6 payload length for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh lines 698-706 )"00:03:"$( : Payload length )"3a:"$( : Next header )"04:"$( : Hop limit )"$saddr:"$( : IP saddr )"$daddr:"$( : IP daddr )"80:"$( : ICMPv6.type )"00:"$( : ICMPv6.code )"00:"$( : ICMPv6.checksum ) Data after IPv6 header: • 80: — 1 byte (ICMPv6 type) • 00: — 1 byte (ICMPv6 code) • 00: — 1 byte (ICMPv6 checksum, truncated) Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match the actual payload size. Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter ↵Aleksei Oladko1-10/+16
enabled [ Upstream commit 02cb2e6bacbb08ebf6acb61be816efd11e1f4a21 ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv4 packet contains a zero IP header checksum. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by calculating and setting a valid IPv4 header checksum for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. Fixed by using the payload_template_calc_checksum() / payload_template_expand_checksum() helpers that are only available in v6.3 and newer kernels. Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2Ido Schimmel1-2/+2
[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONTAristeu Rozanski1-8/+105
[ Upstream commit b24335521de92fd2ee22460072b75367ca8860b0 ] selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT In order to synchronize new processes to test inheritance of memfd_noexec sysctl, memfd_test sets up the sysctl with a value before creating the new process. The new process then sends itself a SIGSTOP in order to wait for the parent to flip the sysctl value and send a SIGCONT signal. This would work as intended if it wasn't the fact that the new process is being created with CLONE_NEWPID, which creates a new PID namespace and the new process has PID 1 in this namespace. There're restrictions on sending signals to PID 1 and, although it's relaxed for other than root PID namespace, it's biting us here. In this specific case the SIGSTOP sent by the new process is ignored (no error to kill() is returned) and it never stops its execution. This is usually not noticiable as the parent usually manages to set the new sysctl value before the child has a chance to run and the test succeeds. But if you run the test in a loop, it eventually reproduces: while [ 1 ]; do ./memfd_test >log 2>&1 || break; done; cat log So this patch replaces the SIGSTOP/SIGCONT synchronization with IPC semaphore. Link: https://lkml.kernel.org/r/a7776389-b3d6-4b18-b438-0b0e3ed1fd3b@work Fixes: 6469b66e3f5a ("selftests: improve vm.memfd_noexec sysctl tests") Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Shuah Khan <shuah@kernel.org> Cc: liuye <liuye@kylinos.cn> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/mm: convert page_size to unsigned longSiddarth G1-6/+6
[ Upstream commit 0bf19a357e0eaf03e757ac9482c45a797e40157a ] Cppcheck warning: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. This patch changes the type of page_size from 'unsigned int' to 'unsigned long' instead of using ULL suffixes. Changing hpage_size to 'unsigned long' was considered, but since gethugepage() expects an int, this change was avoided. Link: https://lkml.kernel.org/r/20250403101345.29226-1-siddarthsgml@gmail.com Signed-off-by: Siddarth G <siddarthsgml@gmail.com> Reported-by: David Binderman <dcb314@hotmail.com> Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02MB10217.eurprd02.prod.outlook.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 7e938f00b003 ("selftests/mm: fix faulting-in code in pagemap_ioctl test") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/mm: pagemap_ioctl: Fix types mismatches shown by compiler optionsMuhammad Usama Anjum2-51/+59
[ Upstream commit 43448e5bbbad1fb168b728b8a7c0058ab1397375 ] Fix following warnings caught by compiler: - There are several type mismatches among different variables. - Remove unused variable warnings. Link: https://lkml.kernel.org/r/20241209185624.2245158-3-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 7e938f00b003 ("selftests/mm: fix faulting-in code in pagemap_ioctl test") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/bpf: Fix resource leak in serial_test_wq on attach failureKery Qi1-2/+3
[ Upstream commit a32ae2658471dd87a2f7a438388ed7d9a5767212 ] When wq__attach() fails, serial_test_wq() returns early without calling wq__destroy(), leaking the skeleton resources allocated by wq__open_and_load(). This causes ASAN leak reports in selftests runs. Fix this by jumping to a common clean_up label that calls wq__destroy() on all exit paths after successful open_and_load. Note that the early return after wq__open_and_load() failure is correct and doesn't need fixing, since that function returns NULL on failure (after internally cleaning up any partial allocations). Fixes: 8290dba51910 ("selftests/bpf: wq: add bpf_wq_start() checks") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20260121094114.1801-3-qikeyu2017@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests/bpf: veristat: fix printing order in output_stats()Puranjay Mohan1-1/+1
[ Upstream commit c286e7e9d1f1f3d90ad11c37e896f582b02d19c4 ] The order of the variables in the printf() doesn't match the text and therefore veristat prints something like this: Done. Processed 24 files, 0 programs. Skipped 62 files, 0 programs. When it should print: Done. Processed 24 files, 62 programs. Skipped 0 files, 0 programs. Fix the order of variables in the printf() call. Fixes: 518fee8bfaf2 ("selftests/bpf: make veristat skip non-BPF and failing-to-open BPF objects") Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20251231221052.759396-1-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-12vsock/test: verify socket options after setting themKonstantin Shkolnyy9-53/+181
commit 86814d8ffd55fd4ad19c512eccd721522a370fb2 upstream. Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> [Stefano: patch needed to avoid vsock test build failure reported by Johan Korsnes after backporting commit 0a98de8013696 ("vsock/test: fix seqpacket message bounds test") in 6.12-stable tree] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Johan Korsnes <johan.korsnes@remarkable.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-11KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failuresZhiquan Li1-0/+1
[ Upstream commit e396a74222654486d6ab45dca5d0c54c408b8b91 ] Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is automatically enabled at -O1 or above. This results in some fortified version of definitions of standard library functions are included. While linker resolves the symbols, the fortified versions might override the definitions in lib/string_override.c and reference to those PLT entries in GLIBC. This is not a problem for the code in host, but it is a disaster for the guest code. E.g., if build and run x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to memset() reference to __memset_chk@plt. The option -fno-builtin-memset is not helpful here, because those fortified versions are not built-in but some definitions which are included by header, they are for different intentions. In order to eliminate the unpredictable behaviors may vary depending on the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to prevent from introducing the fortified definitions. Signed-off-by: Zhiquan Li <zhiquan_li@163.com> Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use") Cc: stable@vger.kernel.org [sean: tag for stable] Signed-off-by: Sean Christopherson <seanjc@google.com> [ Makefile.kvm -> Makefile ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06bpf/selftests: test_select_reuseport_kern: Remove unused headerAlexis Lothoré (eBPF Foundation)1-1/+0
commit 93cf4e537ed0c5bd9ba6cbdb2c33864547c1442f upstream. test_select_reuseport_kern.c is currently including <stdlib.h>, but it does not use any definition from there. Remove stdlib.h inclusion from test_select_reuseport_kern.c Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250227-remove_wrong_header-v1-1-bc94eb4e2f73@bootlin.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> [shung-hsi.yu: Fix compilation error mentioned in footer of Alexis' patch with newer glibc header: [...] CLNG-BPF [test_progs-cpuv4] test_select_reuseport_kern.bpf.o In file included from progs/test_select_reuseport_kern.c:4: /usr/include/bits/floatn.h:83:52: error: unsupported machine mode '__TC__' 83 | typedef _Complex float __cfloat128 __attribute__ ((__mode__ (__TC__))); | ^ /usr/include/bits/floatn.h:97:9: error: __float128 is not supported on this target 97 | typedef __float128 _Float128; I'm not certain when the problem starts to occur, but I'm quite sure test_select_reuseport_kern.c were not meant to be using the C standard library in the first place.] Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: join: fix local endp not being trackedMatthieu Baerts (NGI0)1-5/+4
commit c5d5ecf21fdd9ce91e6116feb3aa83cee73352cc upstream. When running this mptcp_join.sh selftest on older kernel versions not supporting local endpoints tracking, this test fails because 3 MP_JOIN ACKs have been received, while only 2 were expected. It is not clear why only 2 MP_JOIN ACKs were expected on old kernel versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is expected in the selftests included in this kernel version, see commit f4480eaad489 ("selftests: mptcp: add missing join check"). Switch the expected MP_JOIN ACKs to 3. While at it, move this chk_join_nr helper out of the special condition for older kernel versions as it is now the same as with more recent ones. Also, invert the condition to be more logical: what's expected on newer kernel versions having such helper first. Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: check subflow errors in close eventsMatthieu Baerts (NGI0)1-3/+20
commit 2ef9e3a3845d0a20b62b01f5b731debd0364688d upstream. This validates the previous commit: subflow closed events should contain an error field when a subflow got closed with an error, e.g. reset or timeout. For this test, the chk_evt_nr helper has been extended to check attributes in the matched events. In this test, the 2 subflow closed events should have an error. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06selftests: mptcp: check no dup close events after errorMatthieu Baerts (NGI0)1-0/+51
commit 8467458dfa61b37e259e3485a5d3e415d08193c1 upstream. This validates the previous commit: subflow closed events are re-sent with less info when the initial subflow is disconnected after an error and each time a subflow is closed after that. In this new test, the userspace PM is involved because that's how it was discovered, but it is not specific to it. The initial subflow is terminated with a RESET, and that will cause the subflow disconnect. Then, a new subflow is initiated, but also got rejected, which cause a second subflow closed event, but not a third one. While at it, in case of failure to get the expected amount of events, the events are printed. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30selftests/bpf: Check for timeout in perf_link testIhor Solodrai1-2/+13
commit e6c209da7e0e9aaf955a7b59e91ed78c2b6c96fb upstream. Recently perf_link test started unreliably failing on libbpf CI: * https://github.com/libbpf/libbpf/actions/runs/11260672407/job/31312405473 * https://github.com/libbpf/libbpf/actions/runs/11260992334/job/31315514626 * https://github.com/libbpf/libbpf/actions/runs/11263162459/job/31320458251 Part of the test is running a dummy loop for a while and then checking for a counter incremented by the test program. Instead of waiting for an arbitrary number of loop iterations once, check for the test counter in a loop and use get_time_ns() helper to enforce a 100ms timeout. v1: https://lore.kernel.org/bpf/zuRd072x9tumn2iN4wDNs5av0nu5nekMNV4PkR-YwCT10eFFTrUtZBRkLWFbrcCe7guvLStGQlhibo8qWojCO7i2-NGajes5GYIyynexD-w=@pm.me/ Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241011153104.249800-1-ihor.solodrai@pm.me Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30vsock/test: fix seqpacket message bounds testStefano Garzarella1-0/+11
[ Upstream commit 0a98de80136968bab7db37b16282b37f044694d3 ] The test requires the sender (client) to send all messages before waking up the receiver (server). Since virtio-vsock had a bug and did not respect the size of the TX buffer, this test worked, but now that we are going to fix the bug, the test hangs because the sender would fill the TX buffer before waking up the receiver. Set the buffer size in the sender (client) as well, as we already do for the receiver (server). Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests: net: amt: wait longer for connection before sending packetsTaehee Yoo1-2/+5
[ Upstream commit 04708606fd7bdc34b69089a4ff848ff36d7088f9 ] Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel connection between the gateway and the relay, and for the listener socket to be created in the LISTENER namespace. However, tests sometimes fail because packets are sent before the connection is fully established. Increase the waiting time to make the tests more reliable, and use wait_local_port_listen() to explicitly wait for the listener socket. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftests: net: fib-onlink-tests: Convert to use namespaces by defaultRicardo B. Marlière1-41/+30
[ Upstream commit 4f5f148dd7c0459229d2ab9a769b2e820f9ee6a2 ] Currently, the test breaks if the SUT already has a default route configured for IPv6. Fix by avoiding the use of the default namespace. Fixes: 4ed591c8ab44 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route") Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30testptp: Add option to open PHC in readonly modeWojtek Wasko1-14/+23
[ Upstream commit 76868642e42795353106197abf9c607ad80f4c9e ] PTP Hardware Clocks no longer require WRITE permission to perform readonly operations, such as listing device capabilities or listening to EXTTS events once they have been enabled by a process with WRITE permissions. Add '-r' option to testptp to open the PHC in readonly mode instead of the default read-write mode. Skip enabling EXTTS if readonly mode is requested. Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Wojtek Wasko <wwasko@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30selftest/ptp: update ptp selftest to exercise the gettimex optionsMahesh Bandewar1-5/+57
[ Upstream commit 3d07b691ee707c00afaf365440975e81bb96cd9b ] With the inclusion of commit c259acab839e ("ptp/ioctl: support MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime() now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW timebases along with the previously supported CLOCK_REALTIME. This patch adds a command line option 'y' to the testptp program to choose one of the allowed timebases [realtime aka system, monotonic, and monotonic-raw). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Shuah Khan <shuah@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests/bpf: Test invalid narrower ctx loadPaul Chaignon1-0/+25
commit ba578b87fe2beef95b37264f8a98c0b505b93de9 upstream. This patch adds selftests to cover invalid narrower loads on the context. These used to cause kernel warnings before the previous patch. To trigger the warning, the load had to be aligned, to read an affected context field (ex., skb->sk), and not starting at the beginning of the field. The nine new cases all fail without the previous patch. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://patch.msgid.link/44cd83ea9c6868079943f0a436c6efa850528cc1.1753194596.git.paul.chaignon@gmail.com Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23selftests/landlock: Properly close a file descriptorGünther Noack1-1/+2
[ Upstream commit 15e8d739fda1084d81f7d3813e9600eba6e0f134 ] Add a missing close(srv_fd) call, and use EXPECT_EQ() to check the result. Signed-off-by: Günther Noack <gnoack3000@gmail.com> Fixes: f83d51a5bdfe ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets") Link: https://lore.kernel.org/r/20260101134102.25938-2-gnoack3000@gmail.com [mic: Use EXPECT_EQ() and update commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests/landlock: Remove invalid unix socket bind()Matthieu Buffet1-3/+0
[ Upstream commit e1a57c33590a50a6639798e60a597af4a23b0340 ] Remove bind() call on a client socket that doesn't make sense. Since strlen(cli_un.sun_path) returns a random value depending on stack garbage, that many uninitialized bytes are read from the stack as an unix socket address. This creates random test failures due to the bind address being invalid or already in use if the same stack value comes up twice. Fixes: f83d51a5bdfe ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets") Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Reviewed-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20251201003631.190817-1-matthieu@buffet.re Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests/landlock: Fix TCP bind(AF_UNSPEC) test caseMatthieu Buffet2-1/+16
[ Upstream commit bd09d9a05cf04028f639e209b416bacaeffd4909 ] The nominal error code for bind(AF_UNSPEC) on an IPv6 socket is -EAFNOSUPPORT, not -EINVAL. -EINVAL is only returned when the supplied address struct is too short, which happens to be the case in current selftests because they treat AF_UNSPEC like IPv4 sockets do: as an alias for AF_INET (which is a 16-byte struct instead of the 24 bytes required by IPv6 sockets). Make the union large enough for any address (by adding struct sockaddr_storage to the union), and make AF_UNSPEC addresses large enough for any family. Test for -EAFNOSUPPORT instead, and add a dedicated test case for truncated inputs with -EINVAL. Fixes: a549d055a22e ("selftests/landlock: Add network tests") Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Link: https://lore.kernel.org/r/20251027190726.626244-2-matthieu@buffet.re Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23selftests: drv-net: fix RPS mask handling for high CPU numbersGal Pressman1-2/+2
[ Upstream commit cf055f8c000445aa688c53a706ef4f580818eedb ] The RPS bitmask bounds check uses ~(RPS_MAX_CPUS - 1) which equals ~15 = 0xfff0, only allowing CPUs 0-3. Change the mask to ~((1UL << RPS_MAX_CPUS) - 1) = ~0xffff to allow CPUs 0-15. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260112173715.384843-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-23vsock/test: add a final full barrier after run all testsStefano Garzarella1-0/+12
[ Upstream commit c39a6a277e0e67ffff6a8efcbbf7e7e23ce9e38c ] If the last test fails, the other side still completes correctly, which could lead to false positives. Let's add a final barrier that ensures that the last test has finished correctly on both sides, but also that the two sides agree on the number of tests to be performed. Fixes: 2f65b44e199c ("VSOCK: add full barrier between test cases") Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-17bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUNAmery Hung1-3/+1
[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ] To test bpf_xdp_pull_data(), an xdp packet containing fragments as well as free linear data area after xdp->data_end needs to be created. However, bpf_prog_test_run_xdp() always fills the linear area with data_in before creating fragments, leaving no space to pull data. This patch will allow users to specify the linear data size through ctx->data_end. Currently, ctx_in->data_end must match data_size_in and will not be the final ctx->data_end seen by xdp programs. This is because ctx->data_end is populated according to the xdp_buff passed to test_run. The linear data area available in an xdp_buff, max_linear_sz, is alawys filled up before copying data_in into fragments. This patch will allow users to specify the size of data that goes into the linear area. When ctx_in->data_end is different from data_size_in, only ctx_in->data_end bytes of data will be put into the linear area when creating the xdp_buff. While ctx_in->data_end will be allowed to be different from data_size_in, it cannot be larger than the data_size_in as there will be no data to copy from user space. If it is larger than the maximum linear data area size, the layout suggested by the user will not be honored. Data beyond max_linear_sz bytes will still be copied into fragments. Finally, since it is possible for a NIC to produce a xdp_buff with empty linear data area, allow it when calling bpf_test_init() from bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such xdp_buff. This is done by moving lower-bound check to callers as most of them already do except bpf_prog_test_run_skb(). The change also fixes a bug that allows passing an xdp_buff with data < ETH_HLEN. This can happen when ctx is used and metadata is at least ETH_HLEN. Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-17bpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4KYonghong Song2-8/+96
[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ] The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on arm64 with 64KB page: xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on when constructing frags, with 64K page size, the frag data_len could be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail(). To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel can test different page size properly. With the kernel change, the user space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default value is 17, so for 4K page, the maximum packet size will be less than 68K. To test 64K page, a bigger maximum packet size than 68K is desired. So two different functions are implemented for subtest xdp_adjust_frags_tail_grow. Depending on different page size, different data input/output sizes are used to adapt with different page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08idr: fix idr_alloc() returning an ID out of rangeMatthew Wilcox (Oracle)1-0/+21
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream. If you use an IDR with a non-zero base, and specify a range that lies entirely below the base, 'max - base' becomes very large and idr_get_free() can return an ID that lies outside of the requested range. Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Jan Sokolowski <jan.sokolowski@intel.com> Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-08selftests/ftrace: traceonoff_triggers: strip off namesYipeng Zou1-2/+3
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ] The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08selftests: net: fix "buffer overflow detected" for tap.cAlice C. Munduruca1-11/+5
[ Upstream commit 472c5dd6b95c02b3e5d7395acf542150e91165e7 ] When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3', the strcpy() in rtattr_add_strsz() is replaced with a checked version which causes the test to consistently fail when compiled with toolchains for which this option is enabled by default. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN tap.test_packet_valid_udp_gso ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_gso: Test terminated by assertion # FAIL tap.test_packet_valid_udp_gso not ok 1 tap.test_packet_valid_udp_gso # RUN tap.test_packet_valid_udp_csum ... *** buffer overflow detected ***: terminated # test_packet_valid_udp_csum: Test terminated by assertion # FAIL tap.test_packet_valid_udp_csum not ok 2 tap.test_packet_valid_udp_csum # RUN tap.test_packet_crash_tap_invalid_eth_proto ... *** buffer overflow detected ***: terminated # test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion # FAIL tap.test_packet_crash_tap_invalid_eth_proto not ok 3 tap.test_packet_crash_tap_invalid_eth_proto # FAILED: 0 / 3 tests passed. # Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0 A buffer overflow is detected by the fortified glibc __strcpy_chk() since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly reported as 1, even though there is ample space in its bounding buffer `req`. Additionally, given that IFLA_IFNAME also expects a null-terminated string, callers of rtaddr_add_str{,sz}() could simply use the rtaddr_add_strsz() variant. (which has been renamed to remove the trailing `sz`) memset() has been used for this function since it is unchecked and thus circumvents the issue discussed in the previous paragraph. Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver") Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com> Reviewed-by: Cengiz Can <cengiz.can@canonical.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08tools/testing/nvdimm: Use per-DIMM device handleAlison Schofield1-1/+6
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream. KASAN reports a global-out-of-bounds access when running these nfit tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh, daxdev-errors.sh, and inject-error.sh. [] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test] [] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215 [] The buggy address belongs to the variable: [] handle+0x1c/0x1df4 [nfit_test] nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device handle and triggers a KASAN error when it reads past the end of the handle array. It should not be indexing the handle array at all. The correct device handle is stored in per-DIMM test data. Each DIMM has a struct nfit_mem that embeds a struct acpi_nfit_memdev that describes the NFIT device handle. Use that device handle here. Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA") Cc: stable@vger.kernel.org Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>> --- Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-08selftests: mptcp: pm: ensure unknown flags are ignoredMatthieu Baerts (NGI0)2-0/+15
commit 29f4801e9c8dfd12bdcb33b61a6ac479c7162bd7 upstream. This validates the previous commit: the userspace can set unknown flags -- the 7th bit is currently unused -- without errors, but only the supported ones are printed in the endpoints dumps. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-08ktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt1-2/+2
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream. The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-08iommufd/selftest: Make it clearer to gcc that the access is not out of boundsJason Gunthorpe1-5/+3
[ Upstream commit 5b244b077c0b0e76573fbb9542cf038e42368901 ] GCC gets a bit confused and reports: In function '_test_cmd_get_hw_info', inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3, inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1: >> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=] 804 | assert(!info->flags); | ~~~~^~~~~~~ iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info': iommufd.c:761:11: note: object 'buffer_smaller' of size 4 761 | } buffer_smaller; | ^~~~~~~~~~~~~~ While it is true that "struct iommu_test_hw_info[0]" is partly out of bounds of the input pointer, it is not true that info->flags is out of bounds. Unclear why it warns on this. Reuse an existing properly sized stack buffer and pass a truncated length instead to test the same thing. Fixes: af4fde93c319 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl") Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08iommufd/selftest: Update hw_info coverage for an input data_typeNicolin Chen3-23/+46
[ Upstream commit 3a35f7d4a4673edf6f02422bb2d78b17c667e167 ] Test both IOMMU_HW_INFO_TYPE_DEFAULT and IOMMU_HW_INFO_TYPE_SELFTEST, and add a negative test for an unsupported type. Also drop the unused mask in test_cmd_get_hw_capabilities() as checkpatch is complaining. Link: https://patch.msgid.link/r/f01a1e50cd7366f217cbf192ad0b2b79e0eb89f0.1752126748.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Pranjal Shrivastava <praan@google.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFOYi Liu3-5/+33
[ Upstream commit 6d9500bb1ff8c7f9c3ce199521c41aa41e8fd994 ] IOMMU_HW_INFO is extended to report max_pasid_log2, hence add coverage for it. Link: https://patch.msgid.link/r/20250321180143.8468-6-yi.l.liu@intel.com Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08selftests: netfilter: packetdrill: avoid failure on HZ=100 kernelFlorian Westphal1-1/+1
[ Upstream commit fec7b0795548b43e2c3c46e3143c34ef6070341c ] packetdrill --ip_version=ipv4 --mtu=1500 --tolerance_usecs=1000000 --non_fatal packet conntrack_syn_challenge_ack.pkt conntrack v1.4.8 (conntrack-tools): 1 flow entries have been shown. conntrack_syn_challenge_ack.pkt:32: error executing `conntrack -f $NFCT_IP_VERSION \ -L -p tcp --dport 8080 | grep UNREPLIED | grep -q SYN_SENT` command: non-zero status 1 Affected kernel had CONFIG_HZ=100; reset packet was still sitting in backlog. Reported-by: Yi Chen <yiche@redhat.com> Fixes: a8a388c2aae4 ("selftests: netfilter: add packetdrill based conntrack tests") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-08netfilter: nf_nat: remove bogus direction checkFlorian Westphal2-4/+11
[ Upstream commit 5ec8ca26fe93103577c904644b0957f069d0051a ] Jakub reports spurious failures of the 'conntrack_reverse_clash.sh' selftest. A bogus test makes nat core resort to port rewrite even though there is no need for this. When the test is made, nf_nat_used_tuple() would already have caused us to return if no other CPU had added a colliding entry. Moreover, nf_nat_used_tuple() would have ignored the colliding entry if their origin tuples had been the same. All that is left to check is if the colliding entry in the hash table is subject to NAT, and, if its not, if our entry matches in the reverse direction, e.g. hash table has addr1:1234 -> addr2:80, and we want to commit addr2:80 -> addr1:1234. Because we already checked that neither the new nor the committed entry is subject to NAT we only have to check origin vs. reply tuple: for non-nat entries, the reply tuple is always the inverted original. Just in case there are more problems extend the error reporting in the selftest while at it and dump conntrack table/stats on error. Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/ Fixes: d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests: bonding: add delay before each xvlan_over_bond connectivity checkHangbin Liu1-0/+1
[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ] Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular kernel, while the tests consistently pass on a debug kernel. This suggests a timing-sensitive issue. To mitigate this, introduce a short sleep before each xvlan_over_bond connectivity check. The delay helps ensure neighbor and route cache have fully converged before verifying connectivity. The sleep interval is kept minimal since check_connection() is invoked nearly 100 times during the test. Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-03-27 05:41:16 +0300