| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ]
To test bpf_xdp_pull_data(), an xdp packet containing fragments as well
as free linear data area after xdp->data_end needs to be created.
However, bpf_prog_test_run_xdp() always fills the linear area with
data_in before creating fragments, leaving no space to pull data. This
patch will allow users to specify the linear data size through
ctx->data_end.
Currently, ctx_in->data_end must match data_size_in and will not be the
final ctx->data_end seen by xdp programs. This is because ctx->data_end
is populated according to the xdp_buff passed to test_run. The linear
data area available in an xdp_buff, max_linear_sz, is alawys filled up
before copying data_in into fragments.
This patch will allow users to specify the size of data that goes into
the linear area. When ctx_in->data_end is different from data_size_in,
only ctx_in->data_end bytes of data will be put into the linear area when
creating the xdp_buff.
While ctx_in->data_end will be allowed to be different from data_size_in,
it cannot be larger than the data_size_in as there will be no data to
copy from user space. If it is larger than the maximum linear data area
size, the layout suggested by the user will not be honored. Data beyond
max_linear_sz bytes will still be copied into fragments.
Finally, since it is possible for a NIC to produce a xdp_buff with empty
linear data area, allow it when calling bpf_test_init() from
bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such
xdp_buff. This is done by moving lower-bound check to callers as most of
them already do except bpf_prog_test_run_skb(). The change also fixes a
bug that allows passing an xdp_buff with data < ETH_HLEN. This can
happen when ctx is used and metadata is at least ETH_HLEN.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com
Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ]
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL
In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().
To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream.
If you use an IDR with a non-zero base, and specify a range that lies
entirely below the base, 'max - base' becomes very large and
idr_get_free() can return an ID that lies outside of the requested range.
Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org
Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ]
The func_traceonoff_triggers.tc sometimes goes to fail
on my board, Kunpeng-920.
[root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log
=== Ftrace unit tests ===
[1] ftrace - test for function traceon/off triggers [FAIL]
[2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED]
I look up the log, and it shows that the md5sum is different between csum1 and csum2.
++ cnt=611
++ sleep .1
+++ cnt_trace
+++ grep -v '^#' trace
+++ wc -l
++ cnt2=611
++ '[' 611 -ne 611 ']'
+++ cat tracing_on
++ on=0
++ '[' 0 '!=' 0 ']'
+++ md5sum trace
++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace'
++ sleep .1
+++ md5sum trace
++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace'
++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']'
++ fail 'Tracing file is still changing'
++ echo Tracing file is still changing
Tracing file is still changing
++ exit_fail
++ exit 1
So I directly dump the trace file before md5sum, the diff shows that:
[root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines
dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat
dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit
<...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat
<...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit
And we can see that <...> filed be filled with names.
We can strip off the names there to fix that.
After strip off the names:
kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k
kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw
<idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi
<idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi
<idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw
Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com
Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 472c5dd6b95c02b3e5d7395acf542150e91165e7 ]
When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3',
the strcpy() in rtattr_add_strsz() is replaced with a checked
version which causes the test to consistently fail when compiled
with toolchains for which this option is enabled by default.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN tap.test_packet_valid_udp_gso ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_gso: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_gso
not ok 1 tap.test_packet_valid_udp_gso
# RUN tap.test_packet_valid_udp_csum ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_csum: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_csum
not ok 2 tap.test_packet_valid_udp_csum
# RUN tap.test_packet_crash_tap_invalid_eth_proto ...
*** buffer overflow detected ***: terminated
# test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion
# FAIL tap.test_packet_crash_tap_invalid_eth_proto
not ok 3 tap.test_packet_crash_tap_invalid_eth_proto
# FAILED: 0 / 3 tests passed.
# Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0
A buffer overflow is detected by the fortified glibc __strcpy_chk()
since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly
reported as 1, even though there is ample space in its bounding
buffer `req`.
Additionally, given that IFLA_IFNAME also expects a null-terminated
string, callers of rtaddr_add_str{,sz}() could simply use the
rtaddr_add_strsz() variant. (which has been renamed to remove the
trailing `sz`) memset() has been used for this function since it
is unchecked and thus circumvents the issue discussed in the
previous paragraph.
Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver")
Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream.
KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29f4801e9c8dfd12bdcb33b61a6ac479c7162bd7 upstream.
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5b244b077c0b0e76573fbb9542cf038e42368901 ]
GCC gets a bit confused and reports:
In function '_test_cmd_get_hw_info',
inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3,
inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1:
>> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=]
804 | assert(!info->flags);
| ~~~~^~~~~~~
iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info':
iommufd.c:761:11: note: object 'buffer_smaller' of size 4
761 | } buffer_smaller;
| ^~~~~~~~~~~~~~
While it is true that "struct iommu_test_hw_info[0]" is partly out of
bounds of the input pointer, it is not true that info->flags is out of
bounds. Unclear why it warns on this.
Reuse an existing properly sized stack buffer and pass a truncated length
instead to test the same thing.
Fixes: af4fde93c319 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl")
Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a35f7d4a4673edf6f02422bb2d78b17c667e167 ]
Test both IOMMU_HW_INFO_TYPE_DEFAULT and IOMMU_HW_INFO_TYPE_SELFTEST, and
add a negative test for an unsupported type.
Also drop the unused mask in test_cmd_get_hw_capabilities() as checkpatch
is complaining.
Link: https://patch.msgid.link/r/f01a1e50cd7366f217cbf192ad0b2b79e0eb89f0.1752126748.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d9500bb1ff8c7f9c3ce199521c41aa41e8fd994 ]
IOMMU_HW_INFO is extended to report max_pasid_log2, hence add coverage
for it.
Link: https://patch.msgid.link/r/20250321180143.8468-6-yi.l.liu@intel.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5b244b077c0b ("iommufd/selftest: Make it clearer to gcc that the access is not out of bounds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fec7b0795548b43e2c3c46e3143c34ef6070341c ]
packetdrill --ip_version=ipv4 --mtu=1500 --tolerance_usecs=1000000 --non_fatal packet conntrack_syn_challenge_ack.pkt
conntrack v1.4.8 (conntrack-tools): 1 flow entries have been shown.
conntrack_syn_challenge_ack.pkt:32: error executing `conntrack -f $NFCT_IP_VERSION \
-L -p tcp --dport 8080 | grep UNREPLIED | grep -q SYN_SENT` command: non-zero status 1
Affected kernel had CONFIG_HZ=100; reset packet was still sitting in
backlog.
Reported-by: Yi Chen <yiche@redhat.com>
Fixes: a8a388c2aae4 ("selftests: netfilter: add packetdrill based conntrack tests")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ec8ca26fe93103577c904644b0957f069d0051a ]
Jakub reports spurious failures of the 'conntrack_reverse_clash.sh'
selftest. A bogus test makes nat core resort to port rewrite even
though there is no need for this.
When the test is made, nf_nat_used_tuple() would already have caused us
to return if no other CPU had added a colliding entry.
Moreover, nf_nat_used_tuple() would have ignored the colliding entry if
their origin tuples had been the same.
All that is left to check is if the colliding entry in the hash table
is subject to NAT, and, if its not, if our entry matches in the reverse
direction, e.g. hash table has
addr1:1234 -> addr2:80, and we want to commit
addr2:80 -> addr1:1234.
Because we already checked that neither the new nor the committed entry is
subject to NAT we only have to check origin vs. reply tuple:
for non-nat entries, the reply tuple is always the inverted original.
Just in case there are more problems extend the error reporting
in the selftest while at it and dump conntrack table/stats on error.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/
Fixes: d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ]
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08ac69b24507ab06871c18adc421c9d4f1008c61 ]
This rework bond_macvlan.sh into bond_macvlan_ipvlan.sh
We only test bridge mode for macvlan and l2 mode
]# ./bond_macvlan_ipvlan.sh
TEST: active-backup/macvlan_bridge: IPv4: client->server [ OK ]
...
TEST: active-backup/ipvlan_l2: IPv4: client->server [ OK ]
...
TEST: balance-tlb/macvlan_bridge: IPv4: client->server [ OK ]
...
TEST: balance-tlb/ipvlan_l2: IPv4: client->server [ OK ]
...
TEST: balance-alb/macvlan_bridge: IPv4: client->server [ OK ]
...
TEST: balance-alb/ipvlan_l2: IPv4: client->server [ OK ]
...
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Link: https://patch.msgid.link/20250109032819.326528-3-champetier.etienne@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ]
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ]
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c13339039891dbdfa6c1972f0483bd07f610b776 ]
When test_send_signal_kern__open_and_load() fails parent closes the
pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child
continues and enters infinite loop, while parent is stuck in wait(NULL).
Other error paths have similar issue, so kill the child before waiting on it.
The bug was discovered while compiling all of selftests with -O1 instead of -O2
which caused progs/test_send_signal_kern.c to fail to load.
Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bed22c7b90af732978715a1789bca1c3cfa245a6 ]
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0e4ec14dc1ee4b1ec347729c225c3ca950f2bcf6 upstream.
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb13c6bb810ca871964e062cf91882d1c83db509 upstream.
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 852b644acbce1529307a4bb283752c4e77b5cda7 upstream.
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 290493078b96ce2ce3e60f55c23654acb678042a upstream.
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee79980f7a428ec299f6261bea4c1084dcbc9631 upstream.
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6457595db9870298ee30b6d75287b8548e33fe19 upstream.
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 upstream.
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63c643aa7b7287fdbb0167063785f89ece3f000f upstream.
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 216158f063fe24fb003bd7da0cd92cd6e2c4d48b upstream.
Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member
warning due to potential unaligned pointer access:
perf_test.c:239:38: warning: taking address of packed member 'write_index'
of class or structure 'user_reg' may result in an unaligned pointer value
[-Waddress-of-packed-member]
239 | ASSERT_NE(-1, write(self->data_fd, ®.write_index,
| ^~~~~~~~~~~~~~~
Since write(2) works with any alignment. Casting '®.write_index'
explicitly to 'void *' to suppress this warning.
Link: https://lkml.kernel.org/r/20251106095532.15185-1-ankitkhushwaha.linux@gmail.com
Fixes: 42187bdc3ca4 ("selftests/user_events: Add perf self-test for empty arguments events")
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: sunliming <sunliming@kylinos.cn>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd4adb986a86727ed8f56c48b6d0695f1e211e65 upstream.
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".
But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.
The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.
Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.
Cc: stable@vger.kernel.org
Fixes: eb50d0f250e96 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 57531b3416448d1ced36a2a974a4085ec43d57b0 ]
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afb47765f9235181fddc61c8633b5a8cfae29fd2 ]
iommufd returns ENOENT when attempting to unmap a range that is already
empty, while vfio type1 returns success. Fix vfio_compat to match.
Fixes: d624d6652a65 ("iommufd: vfio container FD ioctl compatibility")
Link: https://patch.msgid.link/r/0-v1-76be45eff0be+5d-iommufd_unmap_compat_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Reported-by: Alex Mastro <amastro@fb.com>
Closes: https://lore.kernel.org/r/aP0S5ZF9l3sWkJ1G@devgpu012.nha5.facebook.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
ethtool-common.sh
[ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8e8486702abb05b8c734093aab1606af0eac068 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02d064de05b1fcca769391fa82d205bed8bb9bf0 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50d51cef555ee42fe47dd51b71366a77895e5f0b ]
Quoted from musl wiki:
GNU getopt permutes argv to pull options to the front, ahead of
non-option arguments. musl and the POSIX standard getopt stop
processing options at the first non-option argument with no
permutation.
Thus these scripts stop working on musl since non-option arguments for
tools using getopt() (in this case, (ar)ping) do not always come last.
Fix it by reordering arguments.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250919053538.1106753-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
net/lib dependency
[ Upstream commit d3f7457da7b9527a06dbcbfaf666aa51ac2eeb53 ]
The selftests 'make clean' does not clean the net/lib because it only
processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves
compiled objects in net/lib after cleaning, requiring manual cleanup.
Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib
dependency is properly cleaned.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f186dd5585c3afb415df80e52f71af16c9d3655 ]
Replace the sleep in kill_procs with slowwait.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910025828.38900-2-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53d591730ea34f97a82f7ec6e7c987ca6e34dc21 ]
Constrained test environment; duplicate address detection is not needed
and causes races so disable it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910025828.38900-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c068ba9d3ded56cb1ba4d5135ee84bf8039bd563 ]
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Before:
# ./traceroute.sh
TEST: IPV6 traceroute [FAIL]
TEST: IPV4 traceroute [ OK ]
Tests passed: 1
Tests failed: 1
$ echo $?
0
After:
# ./traceroute.sh
TEST: IPv6 traceroute [FAIL]
traceroute6 did not return 2000:102::2
TEST: IPv4 traceroute [ OK ]
$ echo $?
1
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-5-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47efbac9b768553331b9459743a29861e0acd797 ]
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15c068cb214d74a2faca9293b25f454242d0d65e ]
fcnal-test.sh already includes lib.sh, use relevant helpers
instead of sleeping. Replace sleep after starting nettest
as a server with wait_local_port_listen.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250909223837.863217-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2cda6343bfe459c3331db5afcd675ab333112dd ]
When many ADD_ADDR need to be sent, it can take some time to send each
of them, and create new subflows. Some CIs seem to occasionally have
issues with these tests, especially with "debug" kernels.
Two subtests will now run for a slightly longer time: the last two where
3 or more ADD_ADDR are sent during the test.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-3-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2cf2d5baa09248d3d50b73522594b778388e3bc ]
rss_ctx.test_rss_key_indir implicitly expects at least 5 queues,
as it checks that the traffic on first 2 queues is lower than
the remaining queues when we use all queues. Special case fewer
queues.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901173139.881070-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c158b5a570a188b990ef10ded172b8b93e737826 ]
Commit 0d6ccfe6b319 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc4c0a48bdad7f225740b8e750fdc1da6d85e1eb ]
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Signed-off-by: Wake Liu <wakel@google.com>
Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c36748e8733ef9c5f4cd1d7c4327994e5b88b8df ]
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 105eb5dc74109a9f53c2f26c9a918d9347a73595 ]
bpf_cookie can fail on perf_event_open(), when it runs after the task_work
selftest. The task_work test causes perf to lower
sysctl_perf_event_sample_rate, and bpf_cookie uses sample_freq,
which is validated against that sysctl. As a result,
perf_event_open() rejects the attr if the (now tighter) limit is
exceeded.
>From perf_event_open():
if (attr.freq) {
if (attr.sample_freq > sysctl_perf_event_sample_rate)
return -EINVAL;
} else {
if (attr.sample_period & (1ULL << 63))
return -EINVAL;
}
Switch bpf_cookie to use sample_period, which is not checked against
sysctl_perf_event_sample_rate.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925215230.265501-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a427fddec5e76360725a0f03df3a2a003efbe2e ]
With latest llvm22, I got the following verification failure:
...
; int big_alloc2(void *ctx) @ verifier_arena_large.c:207
0: (b4) w6 = 1 ; R6_w=1
...
; if (err) @ verifier_arena_large.c:233
53: (56) if w6 != 0x0 goto pc+62 ; R6=0
54: (b7) r7 = -4 ; R7_w=-4
55: (18) r8 = 0x7f4000000000 ; R8_w=scalar()
57: (bf) r9 = addr_space_cast(r8, 0, 1) ; R8_w=scalar() R9_w=arena
58: (b4) w6 = 5 ; R6_w=5
; pg = page[i]; @ verifier_arena_large.c:238
59: (bf) r1 = r7 ; R1_w=-4 R7_w=-4
60: (07) r1 += 4 ; R1_w=0
61: (79) r2 = *(u64 *)(r9 +0) ; R2_w=scalar() R9_w=arena
; if (*pg != i) @ verifier_arena_large.c:239
62: (bf) r3 = addr_space_cast(r2, 0, 1) ; R2_w=scalar() R3_w=arena
63: (71) r3 = *(u8 *)(r3 +0) ; R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
64: (5d) if r1 != r3 goto pc+51 ; R1_w=0 R3_w=0
; bpf_arena_free_pages(&arena, (void __arena *)pg, 2); @ verifier_arena_large.c:241
65: (18) r1 = 0xff11000114548000 ; R1_w=map_ptr(map=arena,ks=0,vs=0)
67: (b4) w3 = 2 ; R3_w=2
68: (85) call bpf_arena_free_pages#72675 ;
69: (b7) r1 = 0 ; R1_w=0
; page[i + 1] = NULL; @ verifier_arena_large.c:243
70: (7b) *(u64 *)(r8 +8) = r1
R8 invalid mem access 'scalar'
processed 61 insns (limit 1000000) max_states_per_insn 0 total_states 6 peak_states 6 mark_read 2
=============
#489/5 verifier_arena_large/big_alloc2:FAIL
The main reason is that 'r8' in insn '70' is not an arena pointer.
Further debugging at llvm side shows that llvm commit ([1]) caused
the failure. For the original code:
page[i] = NULL;
page[i + 1] = NULL;
the llvm transformed it to something like below at source level:
__builtin_memset(&page[i], 0, 16)
Such transformation prevents llvm BPFCheckAndAdjustIR pass from
generating proper addr_space_cast insns ([2]).
Adding support in llvm BPFCheckAndAdjustIR pass should work, but
not sure that such a pattern exists or not in real applications.
At the same time, simply adding a memory barrier between two 'page'
assignment can fix the issue.
[1] https://github.com/llvm/llvm-project/pull/155415
[2] https://github.com/llvm/llvm-project/pull/84410
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250920045805.3288551-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0115d063559fa6d25e41751cf455dda40aa2c856 ]
The workload hint may contain some other hints which are not defined.
So mask out unsupported types. Currently only lower 4 bits of workload
type hints are defined.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250828201541.931425-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
