summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-07-12selftests: forwarding: fix error message in learning_testVladimir Oltean1-1/+1
[ Upstream commit 83844aacab2015da1dba1df0cc61fc4b4c4e8076 ] When packets are not received, they aren't received on $host1_if, so the message talking about the second host not receiving them is incorrect. Fix it. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLTVladimir Oltean1-0/+2
[ Upstream commit 1a635d3e1c80626237fdae47a5545b6655d8d81c ] The first host interface has by default no interest in receiving packets MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc filter and this might confuse the selftest. Enable promiscuous mode such that the filter properly counts received packets. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLTVladimir Oltean1-0/+2
[ Upstream commit b8e629b05f5d23f9649c901bef09fab8b0c2e4b9 ] As mentioned in the blamed commit, flood_unicast_test() works by checking the match count on a tc filter placed on the receiving interface. But the second host interface (host2_if) has no interest in receiving a packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even before the ingress tc filter gets to be executed. So we will incorrectly get the message "Packet was not flooded when should", when in fact, the packet was flooded as expected but dropped due to an unrelated reason, at some other layer on the receiving side. Force h2 to accept this packet by temporarily placing it in promiscuous mode. Alternatively we could either deliver to its MAC address or use tcpdump_start, but this has the fewest complications. This fixes the "flooding" test from bridge_vlan_aware.sh and bridge_vlan_unaware.sh, which calls flood_test from the lib. Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-07selftests/rseq: Change type of rseq_offset to ptrdiff_tMathieu Desnoyers3-10/+12
commit 889c5d60fbcf332c8b6ab7054d45f2768914a375 upstream. Just before the 2.35 release of glibc, the __rseq_offset userspace ABI was changed from int to ptrdiff_t. Adapt to this change in the kernel selftests. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread areaMathieu Desnoyers1-32/+34
commit 127b6429d235ab7c358223bbfd8a8b8d8cc799b6 upstream. Rather than use rseq_get_abi() and pass its result through a register to the inline assembler, directly access the per-thread rseq area through a memory reference combining the %gs segment selector, the constant offset of the field in struct rseq, and the rseq_offset value (in a register). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-16-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread areaMathieu Desnoyers1-28/+30
commit 4e15bb766b6c6e963a4d33629034d0ec3b7637df upstream. Rather than use rseq_get_abi() and pass its result through a register to the inline assembler, directly access the per-thread rseq area through a memory reference combining the %fs segment selector, the constant offset of the field in struct rseq, and the rseq_offset value (in a register). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-15-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Fix: work-around asm goto compiler bugsMathieu Desnoyers7-6/+245
commit b53823fb2ef854222853be164f3b1e815f315144 upstream. gcc and clang each have their own compiler bugs with respect to asm goto. Implement a work-around for compiler versions known to have those bugs. gcc prior to 4.8.2 miscompiles asm goto. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 gcc prior to 8.1.0 miscompiles asm goto at O1. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908 clang prior to version 13.0.1 miscompiles asm goto at O2. https://github.com/llvm/llvm-project/issues/52735 Work around these issues by adding a volatile inline asm with memory clobber in the fallthrough after the asm goto and at each label target. Emit this for all compilers in case other similar issues are found in the future. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-14-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Remove arm/mips asm goto compiler work-aroundMathieu Desnoyers2-74/+0
commit 94c5cf2a0e193afffef8de48ddc42de6df7cac93 upstream. The arm and mips work-around for asm goto size guess issues are not properly documented, and lack reference to specific compiler versions, upstream compiler bug tracker entry, and reproducer. I can only find a loosely documented patch in my original LKML rseq post refering to gcc < 7 on ARM, but it does not appear to be sufficient to track the exact issue. Also, I am not sure MIPS really has the same limitation. Therefore, remove the work-around until we can properly document this. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20171121141900.18471-17-mathieu.desnoyers@efficios.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Fix warnings about #if checks of undefined tokensMathieu Desnoyers2-2/+2
commit d7ed99ade3e62b755584eea07b4e499e79240527 upstream. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-12-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Fix ppc32 offsets by using long rather than off_tMathieu Desnoyers9-11/+11
commit 26dc8a6d8e11552f3b797b5aafe01071ca32d692 upstream. The semantic of off_t is for file offsets. We mean to use it as an offset from a pointer. We really expect it to fit in a single register, and not use a 64-bit type on 32-bit architectures. Fix runtime issues on ppc32 where the offset is always 0 due to inconsistency between the argument type (off_t -> 64-bit) and type expected by the inline assembler (32-bit). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-11-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for ↵Mathieu Desnoyers1-27/+28
load/store commit de6b52a21420a18dc8a36438d581efd1313d5fe3 upstream. Building the rseq basic test with gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12) Target: powerpc-linux-gnu leads to these errors: /tmp/ccieEWxU.s: Assembler messages: /tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:118: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:121: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:626: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:629: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:735: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:738: Error: junk at end of line: `,8' /tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `(' /tmp/ccieEWxU.s:741: Error: junk at end of line: `,8' Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed Based on discussion with Linux powerpc maintainers and review of the use of the "m" operand in powerpc kernel code, add the missing %Un%Xn (where n is operand number) to the lwz, stw, ld, and std instructions when used with "m" operands. Using "WORD" to mean either a 32-bit or 64-bit type depending on the architecture is misleading. The term "WORD" really means a 32-bit type in both 32-bit and 64-bit powerpc assembler. The intent here is to wrap load/store to intptr_t into common macros for both 32-bit and 64-bit. Rename the macros with a RSEQ_ prefix, and use the terms "INT" for always 32-bit type, and "LONG" for architecture bitness-sized type. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endianMathieu Desnoyers5-38/+38
commit 24d1136a29da5953de5c0cbc6c83eb62a1e0bf14 upstream. ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by using the rseq_cs.arch.ptr field. Use this field across all architectures. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-9-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35Mathieu Desnoyers3-88/+88
commit 233e667e1ae3e348686bd9dd0172e62a09d852e1 upstream. glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer, rather than through an actual Thread-Local Storage (TLS) variable, as the Linux kernel selftests initially expected. The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot actively coexist in a process, because the kernel supports only a single rseq registration per thread. Here is the scheme introduced to ensure selftests can work both with an older glibc and with glibc-2.35+: - librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI. - librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size, __rseq_flags) using dlsym() in a librseq library constructor. If those are found, copy their values into rseq_offset, rseq_size, and rseq_flags. - Else, if those glibc symbols are not found, handle rseq registration from librseq and use its own IE-model TLS to implement the rseq ABI per-thread storage. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Introduce thread pointer gettersMathieu Desnoyers4-0/+114
commit 886ddfba933f5ce9d76c278165d834d114ba4ffc upstream. This is done in preparation for the selftest uplift to become compatible with glibc-2.35. glibc-2.35 exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer. The toolchains do not implement accessing the thread pointer on all architectures. Provide thread pointer getters for ppc and x86 which lack (or lacked until recently) toolchain support. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-7-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Introduce rseq_get_abi() helperMathieu Desnoyers7-94/+99
commit e546cd48ccc456074ddb8920732aef4af65d7ca7 upstream. This is done in preparation for the selftest uplift to become compatible with glibc-2.35. glibc-2.35 exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer, rather than through an actual Thread-Local Storage (TLS) variable, as the kernel selftests initially expected. Introduce a rseq_get_abi() helper, initially using the __rseq_abi TLS variable, in preparation for changing this userspace ABI for one which is compatible with glibc-2.35. Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot actively coexist in a process, because the kernel supports only a single rseq registration per thread. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-6-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Remove volatile from __rseq_abiMathieu Desnoyers2-4/+4
commit 94b80a19ebfe347a01301d750040a61c38200e2b upstream. This is done in preparation for the selftest uplift to become compatible with glibc-2.35. All accesses to the __rseq_abi fields are volatile, but remove the volatile from the TLS variable declaration, otherwise we are stuck with volatile for the upcoming rseq_get_abi() helper. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-5-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: Remove useless assignment to cpu variableMathieu Desnoyers1-3/+1
commit 930378d056eac2c96407b02aafe4938d0ac9cc37 upstream. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-4-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: introduce own copy of rseq uapi headerMathieu Desnoyers3-14/+161
commit 5c105d55a9dc9e01535116ccfc26e703168a574f upstream. The Linux kernel rseq uapi header has a broken layout for the rseq_cs.ptr field on 32-bit little endian architectures. The entire rseq_cs.ptr field is planned for removal, leaving only the 64-bit rseq_cs.ptr64 field available. Both glibc and librseq use their own copy of the Linux kernel uapi header, where they introduce proper union fields to access to the 32-bit low order bits of the rseq_cs pointer on 32-bit architectures. Introduce a copy of the Linux kernel uapi headers in the Linux kernel selftests. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/rseq: remove ARRAY_SIZE define from individual testsShuah Khan2-4/+2
commit 07ad4f7629d4802ff0d962b0ac23ea6445964e2a upstream. ARRAY_SIZE is defined in several selftests. Remove definitions from individual test files and include header file for the define instead. ARRAY_SIZE define is added in a separate patch to prepare for this change. Remove ARRAY_SIZE from rseq tests and pickup the one defined in kselftest.h. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07rseq/selftests,x86_64: Add rseq_offset_deref_addv()Peter Oskolkov1-0/+57
commit ea366dd79c05fcd4cf5e225d2de8a3a7c293160c upstream. This patch adds rseq_offset_deref_addv() function to tools/testing/selftests/rseq/rseq-x86.h, to be used in a selftest in the next patch in the patchset. Once an architecture adds support for this function they should define "RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV". Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/20200923233618.2572849-2-posk@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07selftests/net: pass ipv6_args to udpgso_bench's IPv6 TCP testDimitris Michailidis1-1/+1
commit b968080808f7f28b89aa495b7402ba48eb17ee93 upstream. udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments since its initial conmit. Looks like a typo. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Cc: willemb@google.com Signed-off-by: Dimitris Michailidis <dmichail@fungible.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14netfilter: nat: really support inet nat without l3 addressFlorian Westphal1-0/+43
[ Upstream commit 282e5f8fe907dc3f2fbf9f2103b0e62ffc3a68a5 ] When no l3 address is given, priv->family is set to NFPROTO_INET and the evaluation function isn't called. Call it too so l4-only rewrite can work. Also add a test case for this. Fixes: a33f387ecd5aa ("netfilter: nft_nat: allow to specify layer 4 protocol NAT only") Reported-by: Yi Chen <yiche@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14selftests/bpf: fix btf_dump/btf_dump due to recent clang changeYonghong Song1-1/+1
[ Upstream commit 4050764cbaa25760aab40857f723393c07898474 ] Latest llvm-project upstream had a change of behavior related to qualifiers on function return type ([1]). This caused selftests btf_dump/btf_dump failure. The following example shows what changed. $ cat t.c typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int)); struct t { int a; fn_ptr_arr2_t l; }; int foo(struct t *arg) { return arg->a; } Compiled with latest upstream llvm15, $ clang -O2 -g -target bpf -S -emit-llvm t.c The related generated debuginfo IR looks like: !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17) !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32) !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19) !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64) !20 = !DISubroutineType(types: !21) !21 = !{!22, null} !22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64) !23 = !DISubroutineType(types: !24) !24 = !{!25, !28} !25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64) !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27) !27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char) You can see two intermediate const qualifier to pointer are dropped in debuginfo IR. With llvm14, we have following debuginfo IR: !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17) !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34) !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19) !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64) !20 = !DISubroutineType(types: !21) !21 = !{!22, null} !22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23) !23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64) !24 = !DISubroutineType(types: !25) !25 = !{!26, !30} !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27) !27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64) !28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29) !29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char) All const qualifiers are preserved. To adapt the selftest to both old and new llvm, this patch removed the intermediate const qualifier in const-to-ptr types, to make the test succeed again. [1] https://reviews.llvm.org/D125919 Reported-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25selftests: add ping test with ping_group_range tunedNicolas Dichtel1-0/+12
[ Upstream commit e71b7f1f44d3d88c677769c85ef0171caf9fc89f ] The 'ping' utility is able to manage two kind of sockets (raw or icmp), depending on the sysctl ping_group_range. By default, ping_group_range is set to '1 0', which forces ping to use an ip raw socket. Let's replay the ping tests by allowing 'ping' to use the ip icmp socket. After the previous patch, ipv4 tests results are the same with both kinds of socket. For ipv6, there are a lot a new failures (the previous patch fixes only two cases). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is ↵Ido Schimmel1-0/+3
operational commit 3122257c02afd9f199a8fc84ae981e1fc4958532 upstream. In emulated environments, the bridge ports enslaved to br1 get a carrier before changing br1's PVID. This means that by the time the PVID is changed, br1 is already operational and configured with an IPv6 link-local address. When the test is run with netdevs registered by mlxsw, changing the PVID is vetoed, as changing the VID associated with an existing L3 interface is forbidden. This restriction is similar to the 8021q driver's restriction of changing the VID of an existing interface. Fix this by taking br1 down and bringing it back up when it is fully configured. With this fix, the test reliably passes on top of both the SW and HW data paths (emulated or not). Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel1-0/+17
[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ] The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu setAthira Rajeev1-8/+17
[ Upstream commit ce64763c63854b4079f2e036638aa881a1fb3fbc ] The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed. Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases. Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15selftests: cgroup: Test open-time cgroup namespace usage for migration checksTejun Heo1-0/+99
commit bf35a7879f1dfb0d050fe779168bcf25c7de66f5 upstream. When a task is writing to an fd opened by a different task, the perm check should use the cgroup namespace of the latter task. Add a test for it. Tested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> [OP: backport to v5.4: adjust context, add wait.h and fcntl.h includes] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15selftests: cgroup: Test open-time credential usage for migration checksTejun Heo1-0/+68
commit 613e040e4dc285367bff0f8f75ea59839bc10947 upstream. When a task is writing to an fd opened by a different task, the perm check should use the credentials of the latter task. Add a test for it. Tested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> [OP: backport to v5.4: adjust context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644Tejun Heo1-1/+1
commit b09c2baa56347ae65795350dfcc633dedb1c2970 upstream. 0644 is an odd perm to create a cgroup which is a directory. Use the regular 0755 instead. This is necessary for euid switching test case. Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15selftests: test_vxlan_under_vrf: Fix broken test caseIdo Schimmel1-4/+4
[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ] The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF. The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else. Fix it by reopening the VXLAN device instead of its physical device. Before: # ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [FAIL] After: # ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [ OK ] Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15selftests/bpf/test_lirc_mode2.sh: Exit with proper codeHangbin Liu1-1/+4
[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ] When test_lirc_mode2_user exec failed, the test report failed but still exit with 0. Fix it by exiting with an error code. Another issue is for the LIRCDEV checking. With bash -n, we need to quote the variable, or it will always be true. So if test_lirc_mode2_user was not run, just exit with skip code. Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15selftests/bpf: Make test_lwt_ip_encap more stable and fasterFelix Maurer1-1/+9
[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ] In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to time. The failure occured when an IPv4 ping through the IPv6 GRE encapsulation did not receive a reply within the timeout. The IPv4 ping and the IPv6 ping in the test used different timeouts (1 sec for IPv4 and 6 sec for IPv6), probably taking into account that IPv6 might need longer to successfully complete. However, when IPv4 pings (with the short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6 apply. The actual reason for the long delays with IPv6 was that the IPv6 neighbor discovery sometimes did not complete in time. This was caused by the outgoing interface only having a tentative link local address, i.e., not having completed DAD for that lladdr. The ND was successfully retried after 1 sec but that was too late for the ping timeout. The IPv6 addresses for the test were already added with nodad. However, for the lladdrs, DAD was still performed. We now disable DAD in the test netns completely and just assume that the two lladdrs on each veth pair do not collide. This removes all the delays for IPv6 traffic in the test. Without the delays, we can now also reduce the delay of the IPv6 ping to 1 sec. This makes the whole test complete faster because we don't need to wait for the excessive timeout for each IPv6 ping that is supposed to fail. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15selftests/x86: Add validity check and allow field splittingMuhammad Usama Anjum1-1/+1
[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ] Add check to test if CC has a string. CC can have multiple sub-strings like "ccache gcc". Erorr pops up if it is treated as single string and double quotes are used around it. This can be fixed by removing the quotes and not treating CC as a single string. Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23Revert "selftests/bpf: Add test for bpf_timer overwriting crash"Greg Kroah-Hartman2-86/+0
This reverts commit dcf55b071de9231e197ba7b1a2d0a423e8d7d33a which is commit a7e75016a0753c24d6c995bc02501ae35368e333 upstream. It is reported to break the bpf self-tests. Reported-by: Geliang Tang <geliang.tang@suse.com> Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/a0a7298ca5c64b3d0ecfcc8821c2de79186fa9f7.camel@nokia.com Link: https://lore.kernel.org/r/HE1PR0402MB3497CB13A12C4D15D20A1FCCF8139@HE1PR0402MB3497.eurprd04.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-19kselftest/vm: fix tests build with old libcChengming Zhou1-0/+1
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ] The error message when I build vm tests on debian10 (GLIBC 2.28): userfaultfd.c: In function `userfaultfd_pagemap_test': userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use in this function); did you mean `MADV_RANDOM'? if (madvise(area_dst, test_pgsize, MADV_PAGEOUT)) ^~~~~~~~~~~~ MADV_RANDOM This patch includes these newer definitions from UAPI linux/mman.h, is useful to fix tests build on systems without these definitions in glibc sys/mman.h. Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests/memfd: clean up mapping in mfd_fail_writeMike Kravetz1-0/+1
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ] Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows: memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages. Fix by making sure to unmap in mfd_fail_write. Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftest/vm: fix map_fixed_noreplace test failureAneesh Kumar K.V1-12/+37
[ Upstream commit f39c58008dee7ab5fc94c3f1995a21e886801df0 ] On the latest RHEL the test fails due to executable mapped at 256MB address # ./map_fixed_noreplace mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists 10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap] 7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar] 7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso] 7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2 7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack] Error: couldn't map the space we need for the test Fix this by finding a free address using mmap instead of hardcoding BASE_ADDRESS. Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Jann Horn <jannh@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests/bpf: Add test for bpf_timer overwriting crashKumar Kartikeya Dwivedi2-0/+86
[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ] Add a test that validates that timer value is not overwritten when doing a copy_map_value call in the kernel. Without the prior fix, this test triggers a crash. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault1-2/+5
[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ] The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Adapt the situation that /dev/zram0 is being usedYang Xu4-63/+66
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram01.sh: Fix compression ratio calculationYang Xu1-22/+8
[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Skip max_comp_streams interface on newer kernelYang Xu1-0/+24
[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: rtc: Increase test timeout so that all tests runNícolas F. R. A. Prado1-1/+1
[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08selftests: futex: Use variable MAKE instead of makeMuhammad Usama Anjum1-2/+2
commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream. Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11selftests: x86: fix [-Wstringop-overread] warn in test_process_vm_readv()Shuah Khan1-1/+1
commit dd40f44eabe1e122c6852fabb298aac05b083fce upstream. Fix the following [-Wstringop-overread] by passing in the variable instead of the value. test_vsyscall.c: In function ‘test_process_vm_readv’: test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread] 500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05selftests/net: udpgso_bench_tx: fix dst ip argumentwujianguo1-1/+7
[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ] udpgso_bench_tx call setup_sockaddr() for dest address before parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}", then ${dst_port} will be ignored, and using default cfg_port 8000. This will cause test case "multiple GRO socks" failed in udpgro.sh. Setup sockaddr after parsing all arguments. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-05selftests: Calculate udpgso segment count without header adjustmentCoco Li1-6/+6
[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ] The below referenced commit correctly updated the computation of number of segments (gso_size) by using only the gso payload size and removing the header lengths. With this change the regression test started failing. Update the tests to match this new behavior. Both IPv4 and IPv6 tests are updated, as a separate patch in this series will update udp_v6_send_skb to match this change in udp_send_skb. Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftest/net/forwarding: declare NETIFS p9 p10Hangbin Liu1-0/+2
[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ] The recent GRE selftests defined NUM_NETIFS=10. If the users copy forwarding.config.sample to forwarding.config directly, they will get error "Command line is not complete" when run the GRE tests, because create_netif_veth() failed with no interface name defined. Fix it by extending the NETIFS with p9 and p10. Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: Fix IPv6 address bind testsDavid Ahern1-5/+13
[ Upstream commit 28a2686c185e84b6aa6a4d9c9a972360eb7ca266 ] IPv6 allows binding a socket to a device then binding to an address not on the device (__inet6_bind -> ipv6_chk_addr with strict flag not set). Update the bind tests to reflect legacy behavior. Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test") Reported-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 02:29:09 +0300