summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-03-16selftests/memfd: clean up mapping in mfd_fail_writeMike Kravetz1-0/+1
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ] Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows: memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages. Fix by making sure to unmap in mfd_fail_write. Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftest/vm: fix map_fixed_noreplace test failureAneesh Kumar K.V1-12/+37
[ Upstream commit f39c58008dee7ab5fc94c3f1995a21e886801df0 ] On the latest RHEL the test fails due to executable mapped at 256MB address # ./map_fixed_noreplace mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists 10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap] 7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar] 7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso] 7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2 7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack] Error: couldn't map the space we need for the test Fix this by finding a free address using mmap instead of hardcoding BASE_ADDRESS. Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Jann Horn <jannh@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests/bpf: Add test for bpf_timer overwriting crashKumar Kartikeya Dwivedi2-0/+86
[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ] Add a test that validates that timer value is not overwritten when doing a copy_map_value call in the kernel. Without the prior fix, this test triggers a crash. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests: pmtu.sh: Kill nettest processes launched in subshell.Guillaume Nault1-2/+12
[ Upstream commit 94a4a4fe4c696413932eed8bdec46574de9576b8 ] When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault1-2/+5
[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ] The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08selftests: mlxsw: resource_scale: Fix return valueAmit Cohen1-1/+1
[ Upstream commit 196f9bc050cbc5085b4cbb61cce2efe380bc66d0 ] The test runs several test cases and is supposed to return an error in case at least one of them failed. Currently, the check of the return value of each test case is in the wrong place, which can result in the wrong return value. For example: # TESTS='tc_police' ./resource_scale.sh TEST: 'tc_police' [default] 968 [FAIL] tc police offload count failed Error: mlxsw_spectrum: Failed to allocate policer index. We have an error talking to the kernel Command failed /tmp/tmp.i7Oc5HwmXY:969 TEST: 'tc_police' [default] overflow 969 [ OK ] ... TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ] $ echo $? 0 Fix this by moving the check to be done after each test case. Fixes: 059b18e21c63 ("selftests: mlxsw: Return correct error code in resource scale test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08selftests: mlxsw: tc_police_scale: Make test more robustAmit Cohen1-1/+2
commit dc9752075341e7beb653e37c6f4a3723074dc8bc upstream. The test adds tc filters and checks how many of them were offloaded by grepping for 'in_hw'. iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control action offload") added offload indication to tc actions, producing the following output: $ tc filter show dev swp2 ingress ... filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0 eth_type ipv6 dst_ip 2001:db8:1::7bf skip_sw in_hw in_hw_count 1 action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b ref 1 bind 1 not_in_hw used_hw_stats immediate The current grep expression matches on both 'in_hw' and 'not_in_hw', resulting in incorrect results. Fix that by using JSON output instead. Fixes: 5061e773264b ("selftests: mlxsw: Add scale test for tc-police") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup settingWaiman Long3-23/+34
[ Upstream commit 209376ed2a8431ccb4c40fdcef11194fc1e749b0 ] The hugetlb cgroup reservation test charge_reserved_hugetlb.sh assume that no cgroup filesystems are mounted before running the test. That is not true in many cases. As a result, the test fails to run. Fix that by querying the current cgroup mount setting and using the existing cgroup setup instead before attempting to freshly mount a cgroup filesystem. Similar change is also made for hugetlb_reparenting_test.sh as well, though it still has problem if cgroup v2 isn't used. The patched test scripts were run on a centos 8 based system to verify that they ran properly. Link: https://lkml.kernel.org/r/20220106201359.1646575-1-longman@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08selftests/ftrace: Do not trace do_softirq because of PREEMPT_RTKrzysztof Kozlowski1-1/+1
[ Upstream commit 6fec1ab67f8d60704cc7de64abcfd389ab131542 ] The PREEMPT_RT patchset does not use do_softirq() function thus trying to filter for do_softirq fails for such kernel: echo do_softirq ftracetest: 81: echo: echo: I/O error Choose some other visible function for the test. The function does not have to be actually executed during the test, because it is only testing filter API interface. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08selftests/seccomp: Fix seccomp failure by adding missing headersSherry Yang1-1/+1
[ Upstream commit 21bffcb76ee2fbafc7d5946cef10abc9df5cfff7 ] seccomp_bpf failed on tests 47 global.user_notification_filter_empty and 48 global.user_notification_filter_empty_threaded when it's tested on updated kernel but with old kernel headers. Because old kernel headers don't have definition of macro __NR_clone3 which is required for these two tests. Since under selftests/, we can install headers once for all tests (the default INSTALL_HDR_PATH is usr/include), fix it by adding usr/include to the list of directories to be searched. Use "-isystem" to indicate it's a system directory as the real kernel headers directories are. Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Tested-by: Sherry Yang <sherry.yang@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-02selftests: bpf: Check bpf_msg_push_data return valueFelix Maurer1-8/+18
commit 61d06f01f9710b327a53492e5add9f972eb909b3 upstream. bpf_msg_push_data may return a non-zero value to indicate an error. The return value should be checked to prevent undetected errors. To indicate an error, the BPF programs now perform a different action than their intended one to make the userspace test program notice the error, i.e., the programs supposed to pass/redirect drop, the program supposed to drop passes. Fixes: 84fbfe026acaa ("bpf: test_sockmap add options to use msg_push_data") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02selftests: mptcp: be more conservative with cookie MPJ limitsPaolo Abeni1-3/+12
commit e35f885b357d47e04380a2056d1b2cc3e6f4f24b upstream. Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02selftests: mptcp: fix diag instabilityPaolo Abeni1-7/+37
commit 0cd33c5ffec12bd77a1c02db2469fac08f840939 upstream. Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258 Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23tests: fix idmapped mount_setattr testChristian Brauner1-2/+2
commit d1c56bfdaca465bd1d0e913053a9c5cafe8b6a6c upstream. The test treated zero as a successful run when it really should treat non-zero as a successful run. A mount's idmapping can't change once it has been attached to the filesystem. Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests") Cc: Seth Forshee <seth.forshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23selftests: fixup build warnings in pidfd / clone3 testsAxel Rasmussen3-8/+5
[ Upstream commit e2aa5e650b07693477dff554053605976789fd68 ] These are some trivial fixups, which were needed to build the tests with clang and -Werror. The following issues are fixed: - Remove various unused variables. - In child_poll_leader_exit_test, clang isn't smart enough to realize syscall(SYS_exit, 0) won't return, so it complains we never return from a non-void function. Add an extra exit(0) to appease it. - In test_pidfd_poll_leader_exit, ret may be branched on despite being uninitialized, if we have !use_waitpid. Initialize it to zero to get the right behavior in that case. Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23pidfd: fix test failure due to stack overflow on some archesAxel Rasmussen2-7/+28
[ Upstream commit 4cbd93c3c110447adc66cb67c08af21f939ae2d7 ] When running the pidfd_fdinfo_test on arm64, it fails for me. After some digging, the reason is that the child exits due to SIGBUS, because it overflows the 1024 byte stack we've reserved for it. To fix the issue, increase the stack size to 8192 bytes (this number is somewhat arbitrary, and was arrived at through experimentation -- I kept doubling until the failure no longer occurred). Also, let's make the issue easier to debug. wait_for_pid() returns an ambiguous value: it may return -1 in all of these cases: 1. waitpid() itself returned -1 2. waitpid() returned success, but we found !WIFEXITED(status). 3. The child process exited, but it did so with a -1 exit code. There's no way for the caller to tell the difference. So, at least log which occurred, so the test runner can debug things. While debugging this, I found that we had !WIFEXITED(), because the child exited due to a signal. This seems like a reasonably common case, so also print out whether or not we have WIFSIGNALED(), and the associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing clearly when it occurs. Finally, I'm suspicious of allocating the child's stack on our stack. man clone(2) suggests that the correct way to do this is with mmap(), and in particular by setting MAP_STACK. So, switch to doing it that way instead. Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/exec: Add non-regular to TEST_GEN_PROGSMuhammad Usama Anjum1-2/+2
commit a7e793a867ae312cecdeb6f06cceff98263e75dd upstream. non-regular file needs to be compiled and then copied to the output directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This removes error thrown by rsync when non-regular object isn't found: rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23selftests: netfilter: disable rp_filter on routerHangbin Liu1-0/+1
commit bbe4c0896d25009a7c86285d2ab024eed4374eea upstream. Some distros may enable rp_filter by default. After ns1 change addr to 10.0.2.99 and set default router to 10.0.2.1, while the connected router address is still 10.0.1.1. The router will not reply the arp request from ns1. Fix it by setting the router's veth0 rp_filter to 0. Before the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1 table inet filter { chain prerouting { type filter hook prerouting priority filter; policy accept; ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop } } After the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops PASS: fib expression did drop packets for 1.1.1.1 PASS: fib expression did drop packets for 1c3::c01d Fixes: 82944421243e ("selftests: netfilter: add fib test case") Signed-off-by: Yi Chen <yiche@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23selftests: netfilter: fix exit value for nft_concat_rangeHangbin Liu1-1/+1
commit 2e71ec1a725a794a16e3862791ed43fe5ba6a06b upstream. When the nft_concat_range test failed, it exit 1 in the code specifically. But when part of, or all of the test passed, it will failed the [ ${passed} -eq 0 ] check and thus exit with 1, which is the same exit value with failure result. Fix it by exit 0 when passed is not 0. Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23kselftest: Fix vdso_test_abi return statusVincenzo Frascino1-73/+62
[ Upstream commit ec049891b2dc16591813eacaddc476b3d27c8c14 ] vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: skip mincore.check_file_mmap when fs lacks needed supportCristian Marussi1-6/+14
[ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ] Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: openat2: Skip testcases that fail with EOPNOTSUPPCristian Marussi1-1/+11
[ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ] Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: openat2: Add missing dependency in MakefileCristian Marussi2-1/+2
[ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ] Add a dependency on header helpers.h to the main target; while at that add to helpers.h also a missing include for bool types. Cc: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: openat2: Print also errno in failure messagesCristian Marussi1-5/+6
[ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ] In E_func() macro, on error, print also errno in order to aid debugging. Cc: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Adapt the situation that /dev/zram0 is being usedYang Xu4-63/+66
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram01.sh: Fix compression ratio calculationYang Xu1-22/+8
[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Skip max_comp_streams interface on newer kernelYang Xu1-0/+24
[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23kselftest: signal all child processesLi Zhijian1-1/+3
[ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ] We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. Here we group all its child processes so that kill() can signal all of them in timeout. Fixed change log: Shuah Khan <skhan@linuxfoundation.org> Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests: rtc: Increase test timeout so that all tests runNícolas F. R. A. Prado1-1/+1
[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23kunit: tool: Import missing importlib.abcMichał Winiarski1-0/+1
[ Upstream commit 235528072f28b3b0a1446279b7eaddda36dbf743 ] Python 3.10.0 contains: 9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)") It causes importlib.util to no longer import importlib.abs, which leads to the following error when trying to use kunit with qemu: AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'? Add the missing import. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08selftests: netfilter: check stateless nat udp checksum fixupFlorian Westphal1-0/+152
commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa upstream. Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08selftests: nft_concat_range: add test for reload with no element add/delFlorian Westphal1-1/+71
commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream. Add a specific test for the reload issue fixed with commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone"). Add to set, then flush set content + restore without other add/remove in the transaction. On kernels before the fix, this test case fails: net,mac with reload [FAIL] Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08selftests: futex: Use variable MAKE instead of makeMuhammad Usama Anjum1-2/+2
commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream. Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08selftests/exec: Remove pipe from TEST_GEN_FILESMuhammad Usama Anjum1-1/+1
commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream. pipe named FIFO special file is being created in execveat.c to perform some tests. Makefile doesn't need to do anything with the pipe. When it isn't found, Makefile generates the following build error: make: *** No rule to make target '../tools/testing/selftests/exec/pipe', needed by 'all'. Stop. pipe is created and removed during test run-time. Amended change log to add pipe remove info: Shuah Khan <skhan@linuxfoundation.org> Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05selftests: mptcp: fix ipv6 routing setupPaolo Abeni1-2/+3
commit 9846921dba4936d92f7608315b5d1e0a8ec3a538 upstream. MPJ ipv6 selftests currently lack per link route to the server net. Additionally, ipv6 subflows endpoints are created without any interface specified. The end-result is that in ipv6 self-tests subflows are created all on the same link, leading to expected delays and sporadic self-tests failures. Fix the issue by adding the missing setup bits. Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Reported-and-tested-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guestSean Christopherson1-1/+0
[ Upstream commit 4cf3d3ebe8794c449af3e0e8c1d790c97e461d20 ] Don't skip the vmcall() in l2_guest_code() prior to re-entering L2, doing so will result in L2 running to completion, popping '0' off the stack for RET, jumping to address '0', and ultimately dying with a triple fault shutdown. It's not at all obvious why the test re-enters L2 and re-executes VMCALL, but presumably it serves a purpose. The VMX path doesn't skip vmcall(), and the test can't possibly have passed on SVM, so just do what VMX does. Fixes: d951b2210c1a ("KVM: selftests: smm_test: Test SMM enter from L2") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125221725.2101126-1-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_faultAlistair Popple1-0/+42
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream. hmm_range_fault() can be used instead of get_user_pages() for devices which allow faulting however unlike get_user_pages() it will return an error when used on a VM_MIXEDMAP range. To make hmm_range_fault() more closely match get_user_pages() remove this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL case in hmm_vma_handle_pte(). Rather than replicating the logic of vm_normal_page() call it directly and do a check for the zero pfn similar to what get_user_pages() currently does. Also add a test to hmm selftest to verify functionality. Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27selftests/powerpc: Add a test of sigreturning to the kernelMichael Ellerman3-0/+134
[ Upstream commit a8968521cfdc3e339fe69473d6632e0aa8d7202a ] We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP before sigreturn. But the chance of it hitting a kernel address and also clearing MSR_PR is fairly slim. So add a specific test of sigreturn to a kernel address, both with and without attempting to clear MSR_PR (which the kernel must block). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/powerpc/spectre_v2: Return skip code when miss_percent is highThadeu Lima de Souza Cascardo1-1/+1
[ Upstream commit 3c42e9542050d49610077e083c7c3f5fd5e26820 ] A mis-match between reported and actual mitigation is not restricted to the Vulnerable case. The guest might also report the mitigation as "Software count cache flush" and the host will still mitigate with branch cache disabled. So, instead of skipping depending on the detected mitigation, simply skip whenever the detected miss_percent is the expected one for a fully mitigated system, that is, above 95%. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211207130557.40566-1-cascardo@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bpf/selftests: Fix namespace mount setup in tc_redirectJiri Olsa1-0/+7
[ Upstream commit 5e22dd18626726028a93ff1350a8a71a00fd843d ] The tc_redirect umounts /sys in the new namespace, which can be mounted as shared and cause global umount. The lazy umount also takes down mounted trees under /sys like debugfs, which won't be available after sysfs mounts again and could cause fails in other tests. # cat /proc/self/mountinfo | grep debugfs 34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw # cat /proc/self/mountinfo | grep sysfs 23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw # mount | grep debugfs debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime) # ./test_progs -t tc_redirect #164 tc_redirect:OK Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED # mount | grep debugfs # cat /proc/self/mountinfo | grep debugfs # cat /proc/self/mountinfo | grep sysfs 25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw Making the sysfs private under the new namespace so the umount won't trigger the global sysfs umount. Reported-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jussi Maki <joamaki@gmail.com> Link: https://lore.kernel.org/bpf/20220104121030.138216-1-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/ftrace: make kprobe profile testcase description uniqueHeiko Carstens1-1/+1
[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ] Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase") added a new kprobes testcase, but has a description which does not describe what the test case is doing and is duplicating the description of another test case. Therefore change the test case description, so it is unique and then allows easily to tell which test case actually passed or failed. Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/bpf: Fix bpf_object leak in skb_ctx selftestAndrii Nakryiko1-0/+2
[ Upstream commit 8c7a95520184b6677ca6075e12df9c208d57d088 ] skb_ctx selftest didn't close bpf_object implicitly allocated by bpf_prog_test_load() helper. Fix the problem by explicitly calling bpf_object__close() at the end of the test. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Link: https://lore.kernel.org/bpf/20211107165521.9240-10-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/bpf: Destroy XDP link correctlyAndrii Nakryiko1-2/+2
[ Upstream commit f91231eeeed752119f49eb6620cae44ec745a007 ] bpf_link__detach() was confused with bpf_link__destroy() and leaves leaked FD in the process. Fix the problem. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Link: https://lore.kernel.org/bpf/20211107165521.9240-9-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/bpf: Fix memory leaks in btf_type_c_dump() helperAndrii Nakryiko1-2/+7
[ Upstream commit 8ba285874913da21ca39a46376e9cc5ce0f45f94 ] Free up memory and resources used by temporary allocated memstream and btf_dump instance. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Link: https://lore.kernel.org/bpf/20211107165521.9240-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests: harness: avoid false negatives if test has no ASSERTsJakub Kicinski1-1/+1
[ Upstream commit 3abedf4646fdc0036fcb8ebbc3b600667167fafe ] Test can fail either immediately when ASSERT() failed or at the end if one or more EXPECT() was not met. The exact return code is decided based on the number of successful ASSERT()s. If test has no ASSERT()s, however, the return code will be 0, as if the test did not fail. Start counting ASSERT()s from 1. Fixes: 369130b63178 ("selftests: Enhance kselftest_harness.h to print which assert failed") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests: clone3: clone3: add case CLONE3_ARGS_NO_TESTAnders Roxell1-0/+6
[ Upstream commit a531b0c23c0fc68ad758cc31a74cf612a4dafeb0 ] Building selftests/clone3 with clang warns about enumeration not handled in switch case: clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch] switch (test_mode) { ^ Add the missing switch case with a comment. Fixes: 17a810699c18 ("selftests: add tests for clone3()") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bpf: Fix the test_task_vma selftest to support output shorter than 1 kBMaxim Mikityanskiy1-2/+3
[ Upstream commit da54ab14953c38d98cb3e34c564c06c3739394b2 ] The test for bpf_iter_task_vma assumes that the output will be longer than 1 kB, as the comment above the loop says. Due to this assumption, the loop becomes infinite if the output turns to be shorter than 1 kB. The return value of read_fd_into_buffer is 0 when the end of file was reached, and len isn't being increased any more. This commit adds a break on EOF to handle short output correctly. For the reference, this is the contents that I get when running test_progs under vmtest.sh, and it's shorter than 1 kB: 00400000-00401000 r--p 00000000 fe:00 25867 /root/bpf/test_progs 00401000-00674000 r-xp 00001000 fe:00 25867 /root/bpf/test_progs 00674000-0095f000 r--p 00274000 fe:00 25867 /root/bpf/test_progs 0095f000-00983000 r--p 0055e000 fe:00 25867 /root/bpf/test_progs 00983000-00a8a000 rw-p 00582000 fe:00 25867 /root/bpf/test_progs 00a8a000-0484e000 rw-p 00000000 00:00 0 7f6c64000000-7f6c64021000 rw-p 00000000 00:00 0 7f6c64021000-7f6c68000000 ---p 00000000 00:00 0 7f6c6ac8f000-7f6c6ac90000 r--s 00000000 00:0d 8032 anon_inode:bpf-map 7f6c6ac90000-7f6c6ac91000 ---p 00000000 00:00 0 7f6c6ac91000-7f6c6b491000 rw-p 00000000 00:00 0 7f6c6b491000-7f6c6b492000 r--s 00000000 00:0d 8032 anon_inode:bpf-map 7f6c6b492000-7f6c6b493000 rw-s 00000000 00:0d 8032 anon_inode:bpf-map 7ffc1e23d000-7ffc1e25e000 rw-p 00000000 00:00 0 7ffc1e3b8000-7ffc1e3bc000 r--p 00000000 00:00 0 7ffc1e3bc000-7ffc1e3bd000 r-xp 00000000 00:00 0 7fffffffe000-7ffffffff000 --xp 00000000 00:00 0 Fixes: e8168840e16c ("selftests/bpf: Add test for bpf_iter_task_vma") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211130181811.594220-1-maximmi@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11userfaultfd/selftests: fix hugetlb area allocationsMike Kravetz1-6/+10
[ Upstream commit f5c73297181c6b3ad76537bad98eaad6d29b9333 ] Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh or any environment where there are 'just enough' hugetlb pages will always fail with: testing events (fork, remap, remove): ERROR: UFFDIO_COPY error: -12 (errno=12, line=616) The ENOMEM error code implies there are not enough hugetlb pages. However, there are free hugetlb pages but they are all reserved. There is a basic problem with the way the test allocates hugetlb pages which has existed since the test was originally written. Due to the way 'cleanup' was done between different phases of the test, this issue was masked until recently. The issue was uncovered by commit 8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each test"). For the hugetlb test, src and dst areas are allocated as PRIVATE mappings of a hugetlb file. This means that at mmap time, pages are reserved for the src and dst areas. At the start of event testing (and other tests) the src area is populated which results in allocation of huge pages to fill the area and consumption of reserves associated with the area. Then, a child is forked to fault in the dst area. Note that the dst area was allocated in the parent and hence the parent owns the reserves associated with the mapping. The child has normal access to the dst area, but can not use the reserves created/owned by the parent. Thus, if there are no other huge pages available allocation of a page for the dst by the child will fail. Fix by not creating reserves for the dst area. In this way the child can use free (non-reserved) pages. Also, MAP_PRIVATE of a file only makes sense if you are interested in the contents of the file before making a COW copy. The test does not do this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous hugetlb mapping. There is no need to create a hugetlb file in the non-shared case. Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11selftests: net: udpgro_fwd.sh: explicitly checking the available ping featureJianguo Wu1-1/+2
commit 5e75d0b215b868337e7a193f28a543ec00e858b1 upstream. As Paolo pointed out, the result of ping IPv6 address depends on the running distro. So explicitly checking the available ping feature, as e.g. do the bareudp.sh self-tests. Fixes: 8b3170e07539 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11selftests: x86: fix [-Wstringop-overread] warn in test_process_vm_readv()Shuah Khan1-1/+1
commit dd40f44eabe1e122c6852fabb298aac05b083fce upstream. Fix the following [-Wstringop-overread] by passing in the variable instead of the value. test_vsyscall.c: In function ‘test_process_vm_readv’: test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread] 500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 10:41:41 +0300