summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
3 daysktest: Run POST_KTEST hooks on failure and cancellationRicardo B. Marlière1-5/+22
[ Upstream commit bc6e165a452da909cef0efbc286e6695624db372 ] PRE_KTEST can be useful for setting up the environment and POST_KTEST to tear it down, however POST_KTEST only runs on the normal end-of-run path. It is skipped when ktest exits through dodie() or cancel_test(). Final cleanup hooks are skipped. Factor the final hook execution into run_post_ktest(), call it from the normal exit path and from the early exit paths, and guard it so the hook runs at most once. Cc: John Hawley <warthog9@eaglescrag.net> Cc: Andrea Righi <arighi@nvidia.com> Cc: Marcos Paulo de Souza <mpdesouza@suse.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Fernando Fernandez Mancera <fmancera@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Link: https://patch.msgid.link/20260307-ktest-fixes-v1-8-565d412f4925@suse.com Fixes: 921ed4c7208e ("ktest: Add PRE/POST_KTEST and TEST options") Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysktest: Honor empty per-test option overridesRicardo B. Marlière1-2/+4
[ Upstream commit a2de57a3c8192dcd67cccaff6c341b93748d799b ] A per-test override can clear an inherited default option by assigning an empty value, but __set_test_option() still used option_defined() to decide whether a per-test key existed. That turned an empty per-test assignment back into "fall back to the default", so tests still could not clear inherited settings. For example: DEFAULTS (...) LOG_FILE = /tmp/ktest-empty-override.log CLEAR_LOG = 1 ADD_CONFIG = /tmp/.config TEST_START TEST_TYPE = build BUILD_TYPE = nobuild ADD_CONFIG = This would run the test with ADD_CONFIG[1] = /tmp/.config Fix by checking whether the per-test key exists before falling back. If it does exist but is empty, treat it as unset for that test and stop the fallback chain there. Cc: John Hawley <warthog9@eaglescrag.net> Cc: Andrea Righi <arighi@nvidia.com> Cc: Marcos Paulo de Souza <mpdesouza@suse.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Fernando Fernandez Mancera <fmancera@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Link: https://patch.msgid.link/20260307-ktest-fixes-v1-4-565d412f4925@suse.com Fixes: 22c37a9ac49d ("ktest: Allow tests to undefine default options") Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysktest: Avoid undef warning when WARNINGS_FILE is unsetRicardo B. Marlière1-1/+1
[ Upstream commit 057854f8a595160656fe77ed7bf0d2403724b915 ] check_buildlog() probes $warnings_file with -f even when WARNINGS_FILE is not configured. Perl warns about the uninitialized value and adds noise to the test log, which can hide the output we actually care about. Check that WARNINGS_FILE is defined before testing whether the file exists. Cc: John Hawley <warthog9@eaglescrag.net> Cc: Andrea Righi <arighi@nvidia.com> Cc: Marcos Paulo de Souza <mpdesouza@suse.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Fernando Fernandez Mancera <fmancera@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Link: https://patch.msgid.link/20260307-ktest-fixes-v1-1-565d412f4925@suse.com Fixes: 4283b169abfb ("ktest: Add make_warnings_file and process full warnings") Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysselftest: memcg: skip memcg_sock test if address family not supportedWaiman Long1-1/+10
[ Upstream commit 2d028f3e4bbbfd448928a8d3d2814b0b04c214f4 ] The test_memcg_sock test in memcontrol.c sets up an IPv6 socket and send data over it to consume memory and verify that memory.stat.sock and memory.current values are close. On systems where IPv6 isn't enabled or not configured to support SOCK_STREAM, the test_memcg_sock test always fails. When the socket() call fails, there is no way we can test the memory consumption and verify the above claim. I believe it is better to just skip the test in this case instead of reporting a test failure hinting that there may be something wrong with the memcg code. Link: https://lkml.kernel.org/r/20260311200526.885899-1-longman@redhat.com Fixes: 5f8f019380b8 ("selftests: cgroup/memcontrol: add basic test for socket accounting") Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Michal Koutný <mkoutny@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysktest: Fix the month in the name of the failure directorySteven Rostedt1-1/+1
commit 768059ede35f197575a38b10797b52402d9d4d2f upstream. The Perl localtime() function returns the month starting at 0 not 1. This caused the date produced to create the directory for saving files of a failed run to have the month off by one. machine-test-useconfig-fail-20260314073628 The above happened in April, not March. The correct name should have been: machine-test-useconfig-fail-20260414073628 This was somewhat confusing. Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Link: https://patch.msgid.link/20260420142426.33ad0293@fedora Fixes: 7faafbd69639b ("ktest: Add open and close console and start stop monitor") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysselftests/mqueue: Fix incorrectly named fileSimon Liebold1-0/+0
commit 64fac99037689020ad97e472ae898e96ea3616dc upstream. Commit 85506aca2eb4 ("selftests/mqueue: Set timeout to 180 seconds") intended to increase the timeout for mq_perf_tests from the default kselftest limit of 45 seconds to 180 seconds. Unfortunately, the file storing this information was incorrectly named `setting` instead of `settings`, causing the kselftest runner not to pick up the limit and keep using the default 45 seconds limit. Fix this by renaming it to `settings` to ensure that the kselftest runner uses the increased timeout of 180 seconds for this test. Fixes: 85506aca2eb4 ("selftests/mqueue: Set timeout to 180 seconds") Cc: <stable@vger.kernel.org> # 5.10.y Signed-off-by: Simon Liebold <simonlie@amazon.de> Link: https://lore.kernel.org/r/20260312140200.2224850-1-simonlie@amazon.de Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18selftests: mptcp: more stable simult_flows testsPaolo Abeni1-4/+7
commit 8c09412e584d9bcc0e71d758ec1008d1c8d1a326 upstream. By default, the netem qdisc can keep up to 1000 packets under its belly to deal with the configured rate and delay. The simult flows test-case simulates very low speed links, to avoid problems due to slow CPUs and the TCP stack tend to transmit at a slightly higher rate than the (virtual) link constraints. All the above causes a relatively large amount of packets being enqueued in the netem qdiscs - the longer the transfer, the longer the queue - producing increasingly high TCP RTT samples and consequently increasingly larger receive buffer size due to DRS. When the receive buffer size becomes considerably larger than the needed size, the tests results can flake, i.e. because minimal inaccuracy in the pacing rate can lead to a single subflow usage towards the end of the connection for a considerable amount of data. Address the issue explicitly setting netem limits suitable for the configured link speeds and unflake all the affected tests. Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-04selftests/mm/charge_reserved_hugetlb: drop mount size for hugetlbfsLi Wang1-2/+2
[ Upstream commit 1aa1dd9cc595917882fb6db67725442956f79607 ] charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a fixed size of 256M. On systems with large base hugepages (e.g. 512MB), this is smaller than a single hugepage, so the hugetlbfs mount ends up with zero capacity (often visible as size=0 in mount output). As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang waiting for progress. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... # mount |grep /mnt/huge none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0) # grep -i huge /proc/meminfo ... HugePages_Total: 10 HugePages_Free: 10 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 524288 kB Hugetlb: 5242880 kB Drop the mount args with 'size=256M', so the filesystem capacity is sufficient regardless of HugeTLB page size. Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter ↵Aleksei Oladko1-10/+16
enabled [ Upstream commit 02cb2e6bacbb08ebf6acb61be816efd11e1f4a21 ] The test generates VXLAN traffic using mausezahn, where the encapsulated inner IPv4 packet contains a zero IP header checksum. After VXLAN decapsulation, such packets do not pass sanity checks in br_netfilter and are dropped, which causes the test to fail. Fix this by calculating and setting a valid IPv4 header checksum for the encapsulated packet generated by mausezahn, so that the packet is accepted by br_netfilter. Fixed by using the payload_template_calc_checksum() / payload_template_expand_checksum() helpers that are only available in v6.3 and newer kernels. Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2Ido Schimmel1-2/+2
[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-19selftests: mptcp: pm: ensure unknown flags are ignoredMatthieu Baerts (NGI0)2-0/+15
commit 29f4801e9c8dfd12bdcb33b61a6ac479c7162bd7 upstream. This validates the previous commit: the userspace can set unknown flags -- the 7th bit is currently unused -- without errors, but only the supported ones are printed in the endpoints dumps. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in pm_netlink.sh, because some refactoring have been done later on: commit 0d16ed0c2e74 ("selftests: mptcp: add {get,format}_endpoint(s) helpers") and commit c99d57d0007a ("selftests: mptcp: use pm_nl endpoint ops") are not in this version. The same operation can still be done at the same place, without using the new helpers. Also, commit 1dc88d241f92 ("selftests: mptcp: pm_nl_ctl: always look for errors") is not in this version, and create a conflict in the context which is not related to the modification here. Conflicts in pm_nl_ctl.c, because commit 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") is not in this version, and caused a conflict in the context which is not related to the modification here. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06testptp: Add option to open PHC in readonly modeWojtek Wasko1-14/+23
[ Upstream commit 76868642e42795353106197abf9c607ad80f4c9e ] PTP Hardware Clocks no longer require WRITE permission to perform readonly operations, such as listing device capabilities or listening to EXTTS events once they have been enabled by a process with WRITE permissions. Add '-r' option to testptp to open the PHC in readonly mode instead of the default read-write mode. Skip enabling EXTTS if readonly mode is requested. Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Wojtek Wasko <wwasko@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftest/ptp: update ptp selftest to exercise the gettimex optionsMahesh Bandewar1-5/+57
[ Upstream commit 3d07b691ee707c00afaf365440975e81bb96cd9b ] With the inclusion of commit c259acab839e ("ptp/ioctl: support MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime() now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW timebases along with the previously supported CLOCK_REALTIME. This patch adds a command line option 'y' to the testptp program to choose one of the allowed timebases [realtime aka system, monotonic, and monotonic-raw). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Shuah Khan <shuah@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06ptp: add testptp mask testXabier Marquiegui1-1/+18
[ Upstream commit 26285e689c6cd2cf3849568c83b2ebe53f467143 ] Add option to test timestamp event queue mask manipulation in testptp. Option -F allows the user to specify a single channel that will be applied on the mask filter via IOCTL. The test program will maintain the file open until user input is received. This allows checking the effect of the IOCTL in debugfs. eg: Console 1: ``` Channel 12 exclusively enabled. Check on debugfs. Press any key to continue ``` Console 2: ``` 0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 ``` Signed-off-by: Xabier Marquiegui <reibax@gmail.com> Suggested-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests/ptp: Add -X option for testing PTP_SYS_OFFSET_PRECISEAlex Maftei1-1/+30
[ Upstream commit 3cf119ad5dc2b5c11385106d6d0ba86fbb47324c ] The -X option was chosen because X looks like a cross, and the underlying callback is 'get cross timestamp'. Signed-off-by: Alex Maftei <alex.maftei@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests/ptp: Add -x option for testing PTP_SYS_OFFSET_EXTENDEDAlex Maftei1-2/+42
[ Upstream commit c8ba75c4eb846888f8f2730690b99cb5bf7b337c ] The -x option (where 'x' stands for eXtended) takes an argument which represents the number of samples to request from the PTP device. The help message will display the maximum number of samples allowed. Providing an invalid argument will also display the maximum number of samples allowed. Signed-off-by: Alex Maftei <alex.maftei@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06testptp: Add support for testing ptp_clock_info .adjphase callbackRahul Rameshbabu1-1/+18
[ Upstream commit 3a9a9a6139286584d1199f555fa4f96f592a3217 ] Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp is invoked with a phase adjustment offset value. Support seconds and nanoseconds for the offset value. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06testptp: add option to shift clock by nanosecondsMaciek Machnikowski1-4/+14
[ Upstream commit f64ae40de5efaa33c36f4e2226b33824ba1b42a7 ] Add option to shift the clock by a specified number of nanoseconds. The new argument -n will specify the number of nanoseconds to add to the ptp clock. Since the API doesn't support negative shifts those needs to be calculated by subtracting full seconds and adding a nanosecond offset. Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 76868642e427 ("testptp: Add option to open PHC in readonly mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06selftests: drv-net: fix RPS mask handling for high CPU numbersGal Pressman1-2/+2
[ Upstream commit cf055f8c000445aa688c53a706ef4f580818eedb ] The RPS bitmask bounds check uses ~(RPS_MAX_CPUS - 1) which equals ~15 = 0xfff0, only allowing CPUs 0-3. Change the mask to ~((1UL << RPS_MAX_CPUS) - 1) = ~0xffff to allow CPUs 0-15. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260112173715.384843-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06vsock/test: add a final full barrier after run all testsStefano Garzarella1-0/+12
[ Upstream commit c39a6a277e0e67ffff6a8efcbbf7e7e23ce9e38c ] If the last test fails, the other side still completes correctly, which could lead to false positives. Let's add a final barrier that ensures that the last test has finished correctly on both sides, but also that the two sides agree on the number of tests to be performed. Fixes: 2f65b44e199c ("VSOCK: add full barrier between test cases") Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19selftests: net: test_vxlan_under_vrf: fix HV connectivity testAndrea Righi1-0/+2
[ Upstream commit e7e4785fa30f9b5d1b60ed2d8e221891325dfc5f ] It looks like test_vxlan_under_vrf.sh is always failing to verify the connectivity test during the ping between the two simulated VMs. This is due to the fact that veth-hv in each VM should have a distinct MAC address. Fix by setting a unique MAC address on each simulated VM interface. Without this fix: $ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL] With this fix applied: $ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [FAIL] NOTE: the connectivity test with the underlay VRF is still failing; it seems that ARP requests are blocked at the simulated hypervisor level, probably due to some missing ARP forwarding rules. This requires more investigation (in the meantime we may consider to set that test as expected failure - XFAIL). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Cao Jiaqiang <caojiaqiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19idr: fix idr_alloc() returning an ID out of rangeMatthew Wilcox (Oracle)1-0/+21
commit c6e8e595a0798ad67da0f7bebaf69c31ef70dfff upstream. If you use an IDR with a non-zero base, and specify a range that lies entirely below the base, 'max - base' becomes very large and idr_get_free() can return an ID that lies outside of the requested range. Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org Fixes: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Jan Sokolowski <jan.sokolowski@intel.com> Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19selftests/ftrace: traceonoff_triggers: strip off namesYipeng Zou1-2/+3
[ Upstream commit b889b4fb4cbea3ca7eb9814075d6a51936394bd9 ] The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19tools/testing/nvdimm: Use per-DIMM device handleAlison Schofield1-1/+6
commit f59b701b4674f7955170b54c4167c5590f4714eb upstream. KASAN reports a global-out-of-bounds access when running these nfit tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh, daxdev-errors.sh, and inject-error.sh. [] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test] [] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215 [] The buggy address belongs to the variable: [] handle+0x1c/0x1df4 [nfit_test] nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device handle and triggers a KASAN error when it reads past the end of the handle array. It should not be indexing the handle array at all. The correct device handle is stored in per-DIMM test data. Each DIMM has a struct nfit_mem that embeds a struct acpi_nfit_memdev that describes the NFIT device handle. Use that device handle here. Fixes: 10246dc84dfc ("acpi nfit: nfit_test supports translate SPA") Cc: stable@vger.kernel.org Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>> --- Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19ktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt1-2/+2
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream. The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19selftests/bpf: Improve reliability of test_perf_branches_no_hw()Matt Bobrowski2-2/+17
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ] Currently, test_perf_branches_no_hw() relies on the busy loop within test_perf_branches_common() being slow enough to allow at least one perf event sample tick to occur before starting to tear down the backing perf event BPF program. With a relatively small fixed iteration count of 1,000,000, this is not guaranteed on modern fast CPUs, resulting in the test run to subsequently fail with the following: bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:PASS:output not valid 0 nsec check_good_sample:PASS:read_branches_size 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_stack 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_global 0 nsec check_good_sample:PASS:read_branches_size 0 nsec test_perf_branches_no_hw:PASS:perf_event_open 0 nsec test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_bad_sample:FAIL:output not valid no valid sample from prog Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1 million increments of a volatile integer can take significantly less than 1 millisecond. If the spin loop and detachment of the perf event BPF program elapses before the first 1 ms sampling interval elapses, the perf event will never end up firing. Fix this by bumping the loop iteration counter a little within test_perf_branches_common(), along with ensuring adding another loop termination condition which is directly influenced by the backing perf event BPF program executing. Notably, a concious decision was made to not adjust the sample_freq value as that is just not a reliable way to go about fixing the problem. It effectively still leaves the race window open. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19selftests/bpf: skip test_perf_branches_hw() on unsupported platformsMatt Bobrowski1-3/+3
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ] Gracefully skip the test_perf_branches_hw subtest on platforms that do not support LBR or require specialized perf event attributes to enable branch sampling. For example, AMD's Milan (Zen 3) supports BRS rather than traditional LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW, attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the generic setup used within this test. Notably, it also probably doesn't hold much value to special case perf event configurations for selected micro architectures. Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest") Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19selftests/bpf: Fix failure paths in send_signal testAlexei Starovoitov1-0/+5
[ Upstream commit c13339039891dbdfa6c1972f0483bd07f610b776 ] When test_send_signal_kern__open_and_load() fails parent closes the pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child continues and enters infinite loop, while parent is stuck in wait(NULL). Other error paths have similar issue, so kill the child before waiting on it. The bug was discovered while compiling all of selftests with -O1 instead of -O2 which caused progs/test_send_signal_kern.c to fail to load. Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3Andrii Nakryiko1-2/+2
commit 70bc793382a0e37ba4e35e4d1a317b280b829a44 upstream. PT_REGS*() macro on some architectures force-cast struct pt_regs to other types (user_pt_regs, etc) and might drop volatile modifiers, if any. Volatile isn't really required as pt_regs value isn't supposed to change during the BPF program run, so this is correct behavior. But progs/loop3.c relies on that volatile modifier to ensure that loop is preserved. Fix loop3.c by declaring i and sum variables as volatile instead. It preserves the loop and makes the test pass on all architectures (including s390x which is currently broken). Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: join: rm: set backup flagMatthieu Baerts (NGI0)1-27/+27
commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 upstream. Some of these 'remove' tests rarely fail because a subflow has been reset instead of cleanly removed. This can happen when one extra subflow which has never carried data is being closed (FIN) on one side, while the other is sending data for the first time. To avoid such subflows to be used right at the end, the backup flag has been added. With that, data will be only carried on the initial subflow. Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ The subtests structure has changed quite a bit in newer versions, see commit c7d49c033de0 ("selftests: mptcp: join: alt. to exec specific tests") and commit ae7bd9ccecc3 ("selftests: mptcp: join: option to execute specific tests") for example. To resolve the conflicts, the same principle has been applied: adding ',backup' for each non-ID0 endpoint in remove_tests. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: mptcp: connect: fix fallback note due to OoOMatthieu Baerts (NGI0)1-1/+1
[ Upstream commit 63c643aa7b7287fdbb0167063785f89ece3f000f ] The "fallback due to TCP OoO" was never printed because the stat_ooo_now variable was checked twice: once in the parent if-statement, and one in the child one. The second condition was then always true then, and the 'else' branch was never taken. The idea is that when there are more ACK + MP_CAPABLE than expected, the test either fails if there was no out of order packets, or a notice is printed. Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Different operators used ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: net: use BASH for bareudp testingPo-Hsu Lin1-1/+1
[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ] In bareudp.sh, this script uses /bin/sh and it will load another lib.sh BASH script at the very beginning. But on some operating systems like Ubuntu, /bin/sh is actually pointed to DASH, thus it will try to run BASH commands with DASH and consequently leads to syntax issues: # ./bareudp.sh: 4: ./lib.sh: Bad substitution # ./bareudp.sh: 5: ./lib.sh: source: not found # ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected Fix this by explicitly using BASH for bareudp.sh. This fixes test execution failures on systems where /bin/sh is not BASH. Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com> Link: https://bugs.launchpad.net/bugs/2129812 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: netdevsim: set test timeout to 10 minutesJakub Kicinski1-0/+1
commit afbf75e8da8ce8a0698212953d350697bb4355a6 upstream. The longest running netdevsim test, nexthop.sh, currently takes 5 min to finish. Around 260s to be exact, and 310s on a debug kernel. The default timeout in selftest is 45sec, so we need an explicit config. Give ourselves some headroom and use 10min. Commit under Fixes isn't really to "blame" but prior to that netdevsim tests weren't integrated with kselftest infra so blaming the tests themselves doesn't seem right, either. Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ↵Wang Liang1-0/+4
ethtool-common.sh [ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07netdevsim: add Makefile for selftestsDavid Wei1-0/+17
[ Upstream commit 8ff25dac88f616ebebb30830e3a20f079d7a30c9 ] Add a Makefile for netdevsim selftests and add selftests path to MAINTAINERS Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: d01f8136d46b ("selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: use destination options instead of hop-by-hopAnubhav Singh1-2/+2
[ Upstream commit f8e8486702abb05b8c734093aab1606af0eac068 ] The GRO self-test, gro.c, currently constructs IPv6 packets containing a Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path correctly handles IPv6 extension headers. However, network elements may be configured to drop packets with the Hop-by-Hop Options header (HBH). This causes the self-test to fail in environments where such network elements are present. To improve the robustness and reliability of this test in diverse network environments, switch from using IPPROTO_HOPOPTS to IPPROTO_DSTOPTS (Destination Options). The Destination Options header is less likely to be dropped by intermediate routers and still serves the core purpose of the test: validating GRO's handling of an IPv6 extension header. This change ensures the test can execute successfully without being incorrectly failed by network policies outside the kernel's control. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Anubhav Singh <anubhavsinggh@google.com> Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: fix GRO coalesce test and add ext header coalesce testsRichard Gobert1-6/+87
[ Upstream commit 4e321d590cec6053cb3c566413794706035ee638 ] Currently there is no test which checks that IPv6 extension header packets successfully coalesce. This commit adds a test, which verifies two IPv6 packets with HBH extension headers do coalesce, and another test which checks that packets with different extension header data do not coalesce in GRO. I changed the receive socket filter to accept a packet with one extension header. This change exposed a bug in the fragment test -- the old BPF did not accept the fragment packet. I updated correct_num_packets in the fragment test accordingly. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f8e8486702ab ("selftests/net: use destination options instead of hop-by-hop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: fix out-of-order delivery of FIN in gro:tcp testAnubhav Singh1-0/+8
[ Upstream commit 02d064de05b1fcca769391fa82d205bed8bb9bf0 ] Due to the gro_sender sending data packets and FIN packets in very quick succession, these are received almost simultaneously by the gro_receiver. FIN packets are sometimes processed before the data packets leading to intermittent (~1/100) test failures. This change adds a delay of 100ms before sending FIN packets in gro:tcp test to avoid the out-of-order delivery. The same mitigation already exists for the gro:ip test. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Anubhav Singh <anubhavsinggh@google.com> Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/Makefile: include $(INSTALL_DEP_TARGETS) in clean target to clean ↵Nai-Chen Cheng1-1/+1
net/lib dependency [ Upstream commit d3f7457da7b9527a06dbcbfaf666aa51ac2eeb53 ] The selftests 'make clean' does not clean the net/lib because it only processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves compiled objects in net/lib after cleaning, requiring manual cleanup. Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib dependency is properly cleaned. Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: Replace sleep with slowwaitDavid Ahern1-1/+1
[ Upstream commit 2f186dd5585c3afb415df80e52f71af16c9d3655 ] Replace the sleep in kill_procs with slowwait. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250910025828.38900-2-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: Disable dad for ipv6 in fcnal-test.shDavid Ahern1-0/+2
[ Upstream commit 53d591730ea34f97a82f7ec6e7c987ca6e34dc21 ] Constrained test environment; duplicate address detection is not needed and causes races so disable it. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250910025828.38900-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests: traceroute: Use require_command()Ido Schimmel1-10/+3
[ Upstream commit 47efbac9b768553331b9459743a29861e0acd797 ] Use require_command() so that the test will return SKIP (4) when a required command is not present. Before: # ./traceroute.sh SKIP: Could not run IPV6 test without traceroute6 SKIP: Could not run IPV4 test without traceroute $ echo $? 0 After: # ./traceroute.sh TEST: traceroute6 not installed [SKIP] $ echo $? 4 Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: Ensure assert() triggers in psock_tpacket.cWake Liu1-0/+1
[ Upstream commit bc4c0a48bdad7f225740b8e750fdc1da6d85e1eb ] The get_next_frame() function in psock_tpacket.c was missing a return statement in its default switch case, leading to a compiler warning. This was caused by a `bug_on(1)` call, which is defined as an `assert()`, being compiled out because NDEBUG is defined during the build. Instead of adding a `return NULL;` which would silently hide the error and could lead to crashes later, this change restores the original author's intent. By adding `#undef NDEBUG` before including <assert.h>, we ensure the assertion is active and will cause the test to abort if this unreachable code is ever executed. Signed-off-by: Wake Liu <wakel@google.com> Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/net: Replace non-standard __WORDSIZE with sizeof(long) * 8Wake Liu1-2/+1
[ Upstream commit c36748e8733ef9c5f4cd1d7c4327994e5b88b8df ] The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>` header, is a GNU extension and not universally available with all toolchains, such as Clang when used with musl libc. This can lead to build failures in environments where this header is missing. The intention of the code is to determine the bit width of a C `long`. Replace the non-portable `__WORDSIZE` with the standard and portable `sizeof(long) * 8` expression to achieve the same result. This change also removes the inclusion of the now-unused `<bits/wordsize.h>` header. Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07selftests/bpf: Fix bpf_prog_detach2 usage in test_lirc_mode2Ricardo B. Marlière1-1/+1
[ Upstream commit 98857d111c53954aa038fcbc4cf48873e4240f7c ] Commit e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs") redefined the way that bpf_prog_detach2() returns. Therefore, adapt the usage in test_lirc_mode2_user.c. Signed-off-by: Ricardo B. Marlière <rbm@suse.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250828-selftests-bpf-v1-1-c7811cd8b98c@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19selftests: mptcp: join: validate C-flag + def limitMatthieu Baerts (NGI0)1-0/+10
commit 008385efd05e04d8dff299382df2e8be0f91d8a0 upstream. The previous commit adds an exception for the C-flag case. The 'mptcp_join.sh' selftest is extended to validate this case. In this subtest, there is a typical CDN deployment with a client where MPTCP endpoints have been 'automatically' configured: - the server set net.mptcp.allow_join_initial_addr_port=0 - the client has multiple 'subflow' endpoints, and the default limits: not accepting ADD_ADDRs. Without the parent patch, the client is not able to establish new subflows using its 'subflow' endpoints. The parent commit fixes that. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mptcp_join.sh, because many different helpers have been modified in newer kernel versions, e.g. in commit 03668c65d153 ("selftests: mptcp: join: rework detailed report"), or commit 985de45923e2 ("selftests: mptcp: centralize stats dumping"), etc. Adaptations have been made to use the old way, similar to what is done just above. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19minmax: make generic MIN() and MAX() macros available everywhereLinus Torvalds1-0/+2
[ Upstream commit 1a251f52cfdc417c84411a056bc142cbd77baef4 ] This just standardizes the use of MIN() and MAX() macros, with the very traditional semantics. The goal is to use these for C constant expressions and for top-level / static initializers, and so be able to simplify the min()/max() macros. These macro names were used by various kernel code - they are very traditional, after all - and all such users have been fixed up, with a few different approaches: - trivial duplicated macro definitions have been removed Note that 'trivial' here means that it's obviously kernel code that already included all the major kernel headers, and thus gets the new generic MIN/MAX macros automatically. - non-trivial duplicated macro definitions are guarded with #ifndef This is the "yes, they define their own versions, but no, the include situation is not entirely obvious, and maybe they don't get the generic version automatically" case. - strange use case #1 A couple of drivers decided that the way they want to describe their versioning is with #define MAJ 1 #define MIN 2 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) which adds zero value and I just did my Alexander the Great impersonation, and rewrote that pointless Gordian knot as #define DRV_VERSION "1.2" instead. - strange use case #2 A couple of drivers thought that it's a good idea to have a random 'MIN' or 'MAX' define for a value or index into a table, rather than the traditional macro that takes arguments. These values were re-written as C enum's instead. The new function-line macros only expand when followed by an open parenthesis, and thus don't clash with enum use. Happily, there weren't really all that many of these cases, and a lot of users already had the pattern of using '#ifndef' guarding (or in one case just using '#undef MIN') before defining their own private version that does the same thing. I left such cases alone. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19rseq/selftests: Use weak symbol reference, not definition, to link with glibcSean Christopherson1-4/+4
commit a001cd248ab244633c5fabe4f7c707e13fc1d1cc upstream. Add "extern" to the glibc-defined weak rseq symbols to convert the rseq selftest's usage from weak symbol definitions to weak symbol _references_. Effectively re-defining the glibc symbols wreaks havoc when building with -fno-common, e.g. generates segfaults when running multi-threaded programs, as dynamically linked applications end up with multiple versions of the symbols. Building with -fcommon, which until recently has the been the default for GCC and clang, papers over the bug by allowing the linker to resolve the weak/tentative definition to glibc's "real" definition. Note, the symbol itself (or rather its address), not the value of the symbol, is set to 0/NULL for unresolved weak symbol references, as the symbol doesn't exist and thus can't have a value. Check for a NULL rseq size pointer to handle the scenario where the test is statically linked against a libc that doesn't support rseq in any capacity. Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Reported-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()Guangshuo Li1-1/+12
commit a9e6aa994917ee602798bbb03180a194b37865bb upstream. devm_kcalloc() may fail. ndtest_probe() allocates three DMA address arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses them in ndtest_nvdimm_init(), which can lead to a NULL pointer dereference under low-memory conditions. Check all three allocations and return -ENOMEM if any allocation fails, jumping to the common error path. Do not emit an extra error message since the allocator already warns on allocation failure. Fixes: 9399ab61ad82 ("ndtest: Add dimms to the two buses") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supportedAkhilesh Patil1-0/+6
[ Upstream commit e8cfc524eaf3c0ed88106177edb6961e202e6716 ] Check if watchdog device supports WDIOF_KEEPALIVEPING option before entering keep_alive() ping test loop. Fix watchdog-test silently looping if ioctl based ping is not supported by the device. Exit from test in such case instead of getting stuck in loop executing failing keep_alive() watchdog_info: identity: m41t93 rtc Watchdog firmware_version: 0 Support/Status: Set timeout (in seconds) Support/Status: Watchdog triggers a management or other external alarm not a reboot Watchdog card disabled. Watchdog timeout set to 5 seconds. Watchdog ping rate set to 2 seconds. Watchdog card enabled. WDIOC_KEEPALIVE not supported by this device without this change Watchdog card disabled. Watchdog timeout set to 5 seconds. Watchdog ping rate set to 2 seconds. Watchdog card enabled. Watchdog Ticking Away! (Where test stuck here forver silently) Updated change log at commit time: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in Fixes: d89d08ffd2c5 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path") Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-06-04 16:24:12 +0300