| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit a32bf5bb7933fde6f39747499f8ec232b5b5400f upstream.
After commit b1f202060afe ("mm: remap unused subpages to shared zeropage
when splitting isolated thp"), cow test cases involving swapping out THPs
via madvise(MADV_PAGEOUT) started to be skipped due to the subsequent
check via pagemap determining that the memory was not actually swapped
out. Logs similar to this were emitted:
...
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (16 kB)
ok 2 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with single PTE of swapped-out THP (16 kB)
ok 3 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (32 kB)
ok 4 # SKIP MADV_PAGEOUT did not work, is swap enabled?
...
The commit in question introduces the behaviour of scanning THPs and if
their content is predominantly zero, it splits them and replaces the pages
which are wholly zero with the zero page. These cow test cases were
getting caught up in this.
So let's avoid that by filling the contents of all allocated memory with
a non-zero value. With this in place, the tests are passing again.
Link: https://lkml.kernel.org/r/20250107142555.1870101-1-ryan.roberts@arm.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bbb6df62c54e6a2c1fcce4908df768f0cfa1e91 upstream.
Currently vma test is failing because of the new vma_assert_attached()
assertion. The check is failing because previous refcount_set() inside
vma_mark_attached() is a NoOp. Fix the definition of atomic_set() to
correctly set the value of the atomic.
Link: https://lkml.kernel.org/r/20241227222220.1726384-1-surenb@google.com
Fixes: 9325b8b5a1cb ("tools: add skeleton code for userland testing of VMA logic")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 218cc166321fb3cc8786677ffe0d09a78778a910 upstream.
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ce2b93fc1dfa1c82f2576aa571731c4e5dcc8dd7 ]
The dsp_local_on selftest expects the scheduler to fail by trying to
schedule an e.g. CPU-affine task to the wrong CPU. However, this isn't
guaranteed to happen in the 1 second window that the test is running.
Besides, it's odd to have this particular exception path tested when there
are no other tests that verify that the interface is working at all - e.g.
the test would pass if dsp_local_on interface is completely broken and fails
on any attempt.
Flip the test so that it verifies that the feature works. While at it, fix a
typo in the info message.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: http://lkml.kernel.org/r/Z1n9v7Z6iNJ-wKmq@slm.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8f614207b0d5e4abd6df8d5cb3cc11f009d1d93 ]
maximal.bpf.c is still dispatching to and consuming from SCX_DSQ_GLOBAL.
Let's have it use its own DSQ to avoid any runtime errors.
Signed-off-by: David Vernet <void@manifault.com>
Tested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef7009decc30eb2515a64253791d61b72229c119 ]
The selftests are falining to build on current tip of bpf-next and
sched_ext [1]. This has broken BPF CI [2] after merge from upstream.
Use appropriate function names in the selftests according to the
recent changes in the sched_ext API [3].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=fc39fb56917bb3cb53e99560ca3612a84456ada2
[2] https://github.com/kernel-patches/bpf/actions/runs/11959327258/job/33340923745
[3] https://lore.kernel.org/all/20241109194853.580310-1-tj@kernel.org/
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e95274dfe86490ec2a5633035c24b2de6722841f ]
After previous change rshift >= 32 is no longer allowed.
Modify the test to use 31, the test doesn't seem to send
any traffic so the exact value shouldn't matter.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103182458.1213486-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b496a8bbed9cc292b0dfd796f38ec58b6d0375f ]
Isolated CPUs are not allowed to be used in a non-isolated partition.
The only exception is the top cpuset which is allowed to contain boot
time isolated CPUs.
Commit ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation
problem") introduces a simplified scheme of including only partition
roots in sched domain generation. However, it does not properly account
for this exception case. This can result in leakage of isolated CPUs
into a sched domain.
Fix it by making sure that isolated CPUs are excluded from the top
cpuset before generating sched domains.
Also update the way the boot time isolated CPUs are handled in
test_cpuset_prs.sh to make sure that those isolated CPUs are really
isolated instead of just skipping them in the tests.
Fixes: ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55853cb829dc707427c3519f6b8686682a204368 ]
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a4607ffba35bf2a630aab299e34dd3f6e658d70 ]
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 246068b86b1c36e4590388ab8f278e21f1997dc1 ]
Since the blamed commit, we require mausezahn because send_raw() uses it.
Remove the "REQUIRE_MZ=no" line, which overwrites the default of requiring it.
Fixes: 237979504264 ("selftests: net: local_termination: add PTP frames to the mix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241219155410.1856868-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd74e238ae6944b462f57ce8752440a011ba4530 ]
Andrii spotted that process_dynptr_func's rejection of incorrect
argument register type will print an error string where argument numbers
are not zero-indexed, unlike elsewhere in the verifier. Fix this by
subtracting 1 from regno. The same scenario exists for iterator
messages. Fix selftest error strings that match on the exact argument
number while we're at it to ensure clean bisection.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 716f2bca1ce93bb95364f1fc0555c1650507b588 ]
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 29d44cce324dab2bd86c447071a596262e7109b6 upstream.
Currently, LoongArch LLVM does not support the constraint "o" and no plan
to support it, it only supports the similar constraint "m", so change the
constraints from "nor" in the "else" case to arch-specific "nmr" to avoid
the build error such as "unexpected asm memory constraint" for LoongArch.
Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests")
Suggested-by: Weining Lu <luweining@loongson.cn>
Suggested-by: Li Chen <chenli@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Link: https://llvm.org/docs/LangRef.html#supported-constraint-code-list
Link: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/LoongArch/LoongArchISelDAGToDAG.cpp#L172
Link: https://lore.kernel.org/bpf/20241219111506.20643-1-yangtiezhu@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a75f19af16ff482cfd6085c77123aa0f464f8dd upstream.
The sysctl tests for vm.memfd_noexec rely on the kernel to support PID
namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the
kernel the test runs on does not support PID namespaces, the first sysctl
test will fail when attempting to spawn a new thread in a new PID
namespace, abort the test, preventing the remaining tests from being run.
This is not desirable, as not all kernels need PID namespaces, but can
still use the other features provided by memfd. Therefore, only run the
sysctl tests if the kernel supports PID namespaces. Otherwise, skip those
tests and emit an informative message to let the user know why the sysctl
tests are not being run.
Link: https://lkml.kernel.org/r/20241205192943.3228757-1-isaacmanjarres@google.com
Fixes: 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a17975992cc11588767175247ccaae1213a8b582 ]
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce03573a1917532da06057da9f8e74a2ee9e2ac9 ]
When using svcr_in to check ZA and Streaming Mode, we should make sure
that the value in x2 is correct, otherwise it may trigger an Illegal
instruction if FEAT_SVE and !FEAT_SME.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211111639.12344-1-o451686892@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d92906fd1b940681b4509f7bb8ae737789fb4695 ]
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f2c7ab15fd806043db1a7d54b5ec36be0bd93b1 ]
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c46ad4d1bb2e8ec2265296e53765190f6e32f33 ]
On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is
checked on $h2 twice, when only the error message is different and does not
match the check itself.
Remove the two duplicated test cases from the test.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf3515c556907b4da290967a2a6cbbd9ee0ee723 ]
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 659b9ba7cb2d7adb64618b87ddfaa528a143766e upstream.
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c00d738e1673ab801e1577e4e3c780ccf88b1a5b upstream.
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d44d26987bb3df6d76556827097fc9ce17565cb8 upstream.
Since 135225a363ae timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.
timekeeping_advance() handles large offsets already correctly.
That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 777f290ab328de333b85558bb6807a69a59b36ba ]
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc34a ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ]
resctrl selftests discover system properties via a variety of sysfs files.
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the contents of
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
Similarly, the resctrl selftests discover the cache size via
/sys/bus/cpu/devices/cpu<id>/cache/index<index>/size.
Take care to do bounds checking when using fscanf() to read the
contents of files into a string buffer because by default fscanf() assumes
arbitrarily long strings. If the file contains more bytes than the array
can accommodate then an overflow will occur.
Provide a maximum field width to the conversion specifier to protect
against array overflow. The maximum is one less than the array size because
string input stores a terminating null byte that is not covered by the
maximum field width.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27141b690547da5650a420f26ec369ba142a9ebb ]
The PAC exec_sign_all() test spawns some child processes, creating pipes
to be stdin and stdout for the child. It cleans up most of the file
descriptors that are created as part of this but neglects to clean up the
parent end of the child stdin and stdout. Add the missing close() calls.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-1-171875f37e44@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dca93d29845dfed60910ba13dbfb6ae6a0e19f6d ]
Currently if we encounter an error between fork() and exec() of a child
process we log the error to stderr. This means that the errors don't get
annotated with the child information which makes diagnostics harder and
means that if we miss the exit signal from the child we can deadlock
waiting for output from the child. Improve robustness and output quality
by logging to stdout instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241023-arm64-fp-stress-exec-fail-v1-1-ee3c62932c15@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4ae132c693896b0713db572676c90ffd855a4246 upstream.
The string logged when a test passes or fails is used by the selftest
framework to identify which test is being reported. The hugetlb_dio test
not only uses the same strings for every test that is run but it also uses
different strings for test passes and failures which means that test
automation is unable to follow what the test is doing at all.
Pull the existing duplicated logging of the number of free huge pages
before and after the test out of the conditional and replace that and the
logging of the result with a single ksft_print_result() which incorporates
the parameters passed into the test into the output.
Link: https://lkml.kernel.org/r/20241127-kselftest-mm-hugetlb-dio-names-v1-1-22aab01bf550@kernel.org
Fixes: fae1980347bf ("selftests: hugetlb_dio: fixup check for initial conditions to skip in the start")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a475c0a7eeb3368eca40fe7cb02d157eeddc77a upstream.
When running selftests I encountered the following error message with
some damon tests:
# Traceback (most recent call last):
# File "[...]/damon/./damos_quota.py", line 7, in <module>
# import _damon_sysfs
# ModuleNotFoundError: No module named '_damon_sysfs'
Fix this by adding the _damon_sysfs.py file to TEST_FILES so that it
will be available when running the respective damon selftests.
Link: https://lkml.kernel.org/r/20241127-picks-visitor-7416685b-mheyne@amazon.de
Fixes: 306abb63a8ca ("selftests/damon: implement a python module for test-purpose DAMON sysfs controls")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 12659d28615d606b36e382f4de2dd05550d202af ]
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779c1 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f36ee29e732b68044d531f47d31f22d265954c6 ]
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Fixes: 685a21c314a8 ("test/vsock: add big message test")
Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ce1c0921a806ee7d4bb24f74a3b30c89fc5fb39 ]
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fbae ("vsock_test: POLLIN + SO_RCVLOWAT test")
Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8f34747bddedaf3895e5d5066e0f71713fff811 ]
The correct exit code to mark a test as skipped is 4.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Link: https://patch.msgid.link/20241126135850.76493-1-mheyne@amazon.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f13242a46438e690067a4bf47068fde4d5719947 ]
Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE,
with errors such as:
# RUN mount_setattr_idmapped.invalid_fd_negative ...
mkfs.ext4: No space left on device while writing out and closing file system
# mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0)
# invalid_fd_negative: Test terminated by assertion
# FAIL mount_setattr_idmapped.invalid_fd_negative
not ok 12 mount_setattr_idmapped.invalid_fd_negative
The code creates a 100,000 byte tmpfs:
ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV,
"size=100000,mode=700"), 0);
And then a little later creates a 2MB ext4 filesystem in that tmpfs:
ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0);
ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0);
At first glance it seems like that should never work, after all 2MB is
larger than 100,000 bytes. However the filesystem image doesn't actually
occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the
ext4.img uses ~84KB of actual space (according to du), which just fits.
However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB,
which is too large to fit in the tmpfs, hence the errors.
It seems fraught to rely on the ext4.img taking less space on disk than
the allocated size, so instead create the tmpfs with a size of 2MB. With
that all 21 tests pass on 64K PAGE_SIZE kernels.
Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0161bd38c24312853ed5ae9a425a1c41c4ac674a ]
On powerpc64 as shown below by readelf, vDSO functions symbols have
type NOTYPE.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
Link: https://github.com/mpe/linux-fullhistory/commit/5f2dd691b62da9d9cc54b938f8b29c22c93cb805
Fixes: ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0290abc9860917f1ee8b58309c2bbd740a39ee8e ]
Some distros may not load nf_conntrack by default, which will cause
subsequent nf_conntrack sets to fail. Load this module if it is not
already loaded.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
[ Jason: add [[ -e ... ]] check so this works in the qemu harness. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 041bd1e4f2d82859690cd8b41c35f0f9404c3770 ]
Fix the bug of some functions were missing return values.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: Guan Jing <guanjing@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9ccb18f83ea2bb654289b6ecf014fd267cc988b ]
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 937a1c29a287e8f48c4cea714c76a13e14d989ac ]
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c658d1 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52ed077aa6336dbef83a2d6d21c52d1706fb7f16 ]
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 862087c3d36219ed44569666eb263efc97f00c9a ]
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 523dffccbadea0cfd65f1ff04944b864c558c4a8 ]
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4095031463d4e99b534d2cd82035a417295764ae ]
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66c54c20408d994be34be2c070fba08472f69eee ]
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb4158ce8ec8a5bb528cc1693356a5eb8058094d ]
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b2bfc29695d273492c3dd8512775261f3272686 ]
Global variables of special types (like `struct bpf_spin_lock`) make
underlying ARRAY maps non-mmapable. To make this work with libbpf's
mmaping logic, application is expected to declare such special variables
as static, so libbpf doesn't even attempt to mmap() such ARRAYs.
test_spin_lock_fail.c didn't follow this rule, but given it relied on
this test to trigger failures, this went unnoticed, as we never got to
the step of mmap()'ing these ARRAY maps.
It is fragile and relies on specific sequence of libbpf steps, which are
an internal implementation details.
Fix the test by marking lockA and lockB as static.
Fixes: c48748aea4f8 ("selftests/bpf: Add failure test cases for spin lock pairing")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b29e231d66303c12b7b8ac3ac2a057df06b161e8 ]
txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be
1 instead of 0.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee9b352ce4650ffc0d8ca0ac373d7c009c7e561e ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c5d ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc9b3fb827fceec4e05564d6e668280f4470ab5b ]
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3e9 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
