| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ]
resctrl selftests discover system properties via a variety of sysfs files.
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the contents of
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
Similarly, the resctrl selftests discover the cache size via
/sys/bus/cpu/devices/cpu<id>/cache/index<index>/size.
Take care to do bounds checking when using fscanf() to read the
contents of files into a string buffer because by default fscanf() assumes
arbitrarily long strings. If the file contains more bytes than the array
can accommodate then an overflow will occur.
Provide a maximum field width to the conversion specifier to protect
against array overflow. The maximum is one less than the array size because
string input stores a terminating null byte that is not covered by the
maximum field width.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48ed4e799e8fbebae838dca404a8527763d41191 ]
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
file for each iMC instance that contains the formatted
output: "event=<event>,umask=<umask>"
Parsing of cas_count_read contents is done by initializing an array of
MAX_TOKENS elements with tokens (deliminated by "=,") from this file.
Remove the unnecessary append of a delimiter to the string needing to be
parsed. Per the strtok() man page: "delimiter bytes at the start or end of
the string are ignored". This has no impact on the token placement within
the array.
After initialization, the actual event and umask is determined by
parsing the tokens directly following the "event" and "umask" tokens
respectively.
Iterating through the array up to index "i < MAX_TOKENS" but then
accessing index "i + 1" risks array overrun during the final iteration.
Avoid array overrun by ensuring that the index used within for
loop will always be valid.
Fixes: 1d3f08687d76 ("selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
loops
[ Upstream commit c44000b6535dc9806b9128d1aed403862b2adab9 ]
The imc perf fd close() calls are missing from all error paths. In
addition, get_mem_bw_imc() handles fds in a for loop but close() is
based on two fixed indexes READ and WRITE.
Open code inner for loops to READ+WRITE entries for clarity and add a
function to close() IMC fds properly in all cases.
Fixes: 7f4d257e3a2a ("selftests/resctrl: Add callback to start a benchmark")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc8ff7f5c85c076297b18fb9f6d45ec5569d3d44 ]
The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.
Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.
Convert perror() to ksft_perror() or ksft_print_msg().
Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: c44000b6535d ("selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 508934b5d15ab79fd5895cc2a6063bc9d95f6a55 ]
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: c44000b6535d ("selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3aff5146445582454c35900f3c0c972987cdd595 ]
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes: caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e33cb5702a9f287d829b0e9e6abe57f6a4aba6d2 ]
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit beb7f471847663559bd0fe60af1d70e05a1d7c6c upstream.
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes: 73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct resctrl_val_param has ->setup() function that accepts variable
argument list. All test cases use only 1 argument as input and it's
the struct resctrl_val_param pointer.
Instead of variable argument list, directly pass struct
resctrl_val_param pointer as the only parameter to ->setup().
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to
umount resctrl FS.
Each and every test does require resctrl FS to be present already for
feature check. Thus, it makes sense to just mount it on higher level in
resctrl_tests.c and properly pair it with umount.
Move resctrl FS (re)mount/unmount into each test function in
resctrl_tests.c. Make feature validation to simply check that resctrl
FS is mounted.
As there's the final umount in main() before this change, the selftest
should not leave resctrl FS behind after the tests even if one of the
forementioned paths is taken (thus, no fixes tag).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
tests
After creating a child process with fork() in CAT test, if a signal such
as SIGINT is received, the parent process will be terminated immediately,
and therefore the child process will not be killed and also resctrlfs is
not unmounted.
There is a signal handler registered in CMT/MBM/MBA tests, which kills
child process, unmount resctrlfs, cleanups result files, etc., if a
signal such as SIGINT is received.
Commonize the signal handler registered for CMT/MBM/MBA tests and
reuse it in CAT.
To reuse the signal handler to kill child process use global bm_pid
instead of local bm_pid.
Also, since the MBA/MBA/CMT/CAT are run in order, unregister the signal
handler at the end of each test so that the signal handler cannot be
inherited by other tests.
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When a process has buffered output, a child process created by fork()
will also copy buffered output. When using kselftest framework,
the output (resctrl test result message) will be printed multiple times.
Add fflush() to flush out the buffered output before executing fork().
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.
Both test branches call param->setup().
Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
SIGTERM is received
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Dan reported following static checker warnings
tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals()
warn: 'bw_imc' unsigned <= 0
tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals()
warn: 'bw_resc_end' unsigned <= 0
These warnings are reported because
1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long
variables
2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned
to 'bw_imc' and 'bw_resc_end' respectively
3. The returned values are checked for <= 0 to see if the calls failed
Checking for < 0 for an unsigned value doesn't make any sense.
Fix this issue by changing the implementation of get_mem_bw_imc() and
get_mem_bw_resctrl() such that they now accept reference to a variable
and set the variable appropriately upon success and return 0, else return
< 0 on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
iMC (Integrated Memory Controller) counters are usually at
"/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>".
num_of_imcs() function tries to count number of such iMC counters so that
it could appropriately initialize required number of perf_attr structures
that could be used to read these iMC counters.
num_of_imcs() function assumes that all the directories under this path
that start with "uncore_imc" are iMC counters. But, on some systems there
could be directories named as "uncore_imc_free_running" which aren't iMC
counters. Trying to read from such directories will result in "not found
file" errors and MBM/MBA tests will fail.
Hence, fix the logic in num_of_imcs() such that it looks at the first
character after "uncore_imc_" to check if it's a numerical digit or not. If
it's a digit then the directory represents an iMC counter, else, skip the
directory.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Call kselftest APIs instead of using printf() to log test results
for cleaner code and better future extension.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CMT (Cache Monitoring Technology) [1] is a H/W feature that reports cache
occupancy of a process. resctrl selftest suite has a unit test to test CMT
for LLC but the test is named as CQM (Cache Quality Monitoring).
Furthermore, the unit test source file is named as cqm_test.c and several
functions, variables, comments, preprocessors and statements widely use
"cqm" as either suffix or prefix. This rampant misusage of CQM for CMT
might confuse someone who is newly looking at resctrl selftests because
this feature is named CMT in the Intel Software Developer's Manual.
Hence, rename all the occurrences (unit test source file name, functions,
variables, comments and preprocessors) of cqm with cmt.
[1] Please see Intel SDM, Volume 3, chapter 17 and section 18 for more
information on CMT: https://software.intel.com/content/www/us/en/develop/articles/intel-sdm.html
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Checking resctrl features call strcmp() to compare feature strings
(e.g. "mba", "cat" etc). The checkings are error prone and don't have
good coding style. Define the constant strings in macros and call
strncmp() to solve the potential issues.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Cache QoS Monitoring (CQM) selftest starts stressful cache benchmark
with specified size of memory to access the cache. Last Level cache
occupancy reported by CQM should be close to the size of the memory.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
MBM (Memory Bandwidth Monitoring) test is the first implemented selftest.
It starts a stressful memory bandwidth benchmark and assigns the
bandwidth pid in a resctrl monitoring group. Read and compare perf IMC
counter and MBM total bytes for the benchmark. The numbers should be
close enough to pass the test.
Default benchmark is built-in fill_buf. But users can specify their
own benchmark by option "-b".
We can add memory bandwidth monitoring for multiple processes in the
future.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The callback starts a child process and puts the child pid in created
resctrl group with specified memory bandwidth in schemata. The child
starts running benchmark.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrl file system
Total memory bandwidth can be monitored from perf IMC counter and from
resctrl file system. Later the two will be compared to verify the total
memory bandwidth read from resctrl is correct.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
