summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net
AgeCommit message (Collapse)AuthorFilesLines
2023-10-06selftests: tls: swap the TX and RX sockets in some testsSabrina Dubroca1-4/+4
[ Upstream commit c326ca98446e0ae4fee43a40acf79412b74cfedb ] tls.sendmsg_large and tls.sendmsg_multiple are trying to send through the self->cfd socket (only configured with TLS_RX) and to receive through the self->fd socket (only configured with TLS_TX), so they're not using kTLS at all. Swap the sockets. Fixes: 7f657d5bf507 ("selftests: tls: add selftests for TLS sockets") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19selftest: tcp: Fix address length in bind_wildcard.c.Kuniyuki Iwashima1-1/+1
[ Upstream commit 0071d15517b4a3d265abc00395beb1138e7236c7 ] The selftest passes the IPv6 address length for an IPv4 address. We should pass the correct length. Note inet_bind_sk() does not check if the size is larger than sizeof(struct sockaddr_in), so there is no real bug in this selftest. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-20selftests/net: Add log.txt and tools to .gitignoreAnh Tuan Phan1-0/+2
Update .gitignore to untrack tools directory and log.txt. "tools" is generated in "selftests/net/Makefile" and log.txt is generated in "selftests/net/gro.sh" when executing run_all_tests. Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14selftests: mirror_gre_changes: Tighten up the TTL test matchPetr Machata1-1/+2
This test verifies whether the encapsulated packets have the correct configured TTL. It does so by sending ICMP packets through the test topology and mirroring them to a gretap netdevice. On a busy host however, more than just the test ICMP packets may end up flowing through the topology, get mirrored, and counted. This leads to potential spurious failures as the test observes much more mirrored packets than the sent test packets, and assumes a bug. Fix this by tightening up the mirror action match. Change it from matchall to a flower classifier matching on ICMP packets specifically. Fixes: 45315673e0c5 ("selftests: forwarding: Test changes in mirror-to-gretap") Signed-off-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-10selftests: forwarding: bridge_mdb: Make test more robustIdo Schimmel1-4/+4
Some test cases check that the group timer is (or isn't) 0. Instead of grepping for "0.00" grep for " 0.00" as the former can also match "260.00" which is the default group membership interval. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb_max: Fix failing test with old libnetIdo Schimmel1-4/+10
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-17-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb: Fix failing test with old libnetIdo Schimmel1-22/+24
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_flower_l2_miss: Fix failing test with old libnetIdo Schimmel1-5/+8
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-15-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_tunnel_key: Make filters more specificIdo Schimmel1-3/+6
The test installs filters that match on various IP fragments (e.g., no fragment, first fragment) and expects a certain amount of packets to hit each filter. This is problematic as the filters are not specific enough and can match IP packets (e.g., IGMP) generated by the stack, resulting in failures [1]. Fix by making the filters more specific and match on more fields in the IP header: Source IP, destination IP and protocol. [1] # timeout set to 0 # selftests: net/forwarding: tc_tunnel_key.sh # TEST: tunnel_key nofrag (skip_hw) [FAIL] # packet smaller than MTU was not tunneled # INFO: Could not test offloaded functionality not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1 Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-14-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_flower: Relax success criterionIdo Schimmel1-4/+4
The test checks that filters that match on source or destination MAC were only hit once. A host can send more than one packet with a given source or destination MAC, resulting in failures. Fix by relaxing the success criterion and instead check that the filters were not hit zero times. Using tc_check_at_least_x_packets() is also an option, but it is not available in older kernels. Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: tc_actions: Use ncat instead of ncIdo Schimmel1-2/+4
The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supportedIdo Schimmel1-5/+13
MAC Merge cannot be tested with veth pairs, resulting in failures: # ./ethtool_mm.sh [...] TEST: Manual configuration with verification: swp1 to swp2 [FAIL] Verification did not succeed Fix by skipping the test when the interfaces do not support MAC Merge. Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairsIdo Schimmel1-0/+2
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool_extended_state: Skip when using veth pairsIdo Schimmel1-0/+2
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: ethtool: Skip when using veth pairsIdo Schimmel1-0/+2
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Add a helper to skip test when using veth pairsIdo Schimmel1-0/+11
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Set default IPv6 traceroute utilityIdo Schimmel2-0/+3
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb_max: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: bridge_mdb: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Switch off timeoutIdo Schimmel1-0/+1
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf: Switch off timeout"). Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10selftests: forwarding: Skip test when no interfaces are specifiedIdo Schimmel1-0/+5
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop bucket dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e54fc ("net: Initial nexthop code") Reported-by: Petr Machata <petrm@nvidia.com> Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05selftests: mptcp: join: fix 'implicit EP' testAndrea Claudi1-2/+3
mptcp_join 'implicit EP' test currently fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' Error: too many addresses or duplicate one: -22. ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal ' This happens because of two reasons: - iproute v6.3.0 does not support the implicit flag, fixed with iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit flag") - pm_nl_check_endpoint wrongly expects the ip address to be repeated two times in iproute output, and does not account for a final whitespace in it. This fixes the issue trimming the whitespace in the output string and removing the double address in the expected string. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05selftests: mptcp: join: fix 'delete and re-add' testAndrea Claudi1-0/+1
mptcp_join 'delete and re-add' test fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 002 delete and re-add before delete[ ok ] mptcp_info subflows=1 [ ok ] Error: argument "ADDRESS" is wrong: invalid for non-zero id address after delete[fail] got 2:2 subflows expected 1 This happens because endpoint delete includes an ip address while id is not 0, contrary to what is indicated in the ip mptcp man page: "When used with the delete id operation, an IFADDR is only included when the ID is 0." This fixes the issue using the $addr variable in pm_nl_del_endpoint() only when id is 0. Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-05selftests: net: test vxlan pmtu exceptions with tcpFlorian Westphal1-0/+35
TCP might get stuck if a nonlinear skb exceeds the path MTU, icmp error contains an incorrect icmp checksum in that case. Extend the existing test for vxlan to also send at least 1MB worth of data via TCP in addition to the existing 'large icmp packet adds route exception'. On my test VM this fails due to 0-size output file without "tunnels: fix kasan splat when generating ipv4 pmtu error". Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02selftest: net: Assert on a proper value in so_incoming_cpu.c.Kuniyuki Iwashima1-1/+1
Dan Carpenter reported an error spotted by Smatch. ./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients() error: uninitialized symbol 'ret'. The returned value of sched_setaffinity() should be checked with ASSERT_EQ(), but the value was not saved in a proper variable, resulting in an error above. Let's save the returned value of with sched_setaffinity(). Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-kselftest/fe376760-33b6-4fc9-88e8-178e809af1ac@moroto.mountain/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230731181553.5392-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27selftests: mptcp: join: only check for ip6tables if neededMatthieu Baerts1-3/+1
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be used instead of 'ip6tables'. So no need to look if 'ip6tables' is available in this case. Cc: stable@vger.kernel.org Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-05selftests: mptcp: pm_nl_ctl: fix 32-bit supportMatthieu Baerts1-5/+5
When using pm_nl_ctl to validate userspace path-manager's behaviours, it was failing on 32-bit architectures ~half of the time. pm_nl_ctl was not reporting any error but the command was not doing what it was expected to do. As a result, the expected linked event was not triggered after and the test failed. This is due to the fact the token given in argument to the application was parsed as an integer with atoi(): in a 32-bit arch, if the number was bigger than INT_MAX, 2147483647 was used instead. This can simply be fixed by using strtoul() instead of atoi(). The errors have been seen "by chance" when manually looking at the results from LKFT. Fixes: 9a0b36509df0 ("selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE") Cc: stable@vger.kernel.org Fixes: ecd2a77d672f ("selftests: mptcp: support MPTCP_PM_CMD_REMOVE") Fixes: cf8d0a6dfd64 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE") Fixes: 57cc361b8d38 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY") Fixes: ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: depend on SYN_COOKIESMatthieu Baerts1-0/+1
MPTCP selftests are using TCP SYN Cookies for quite a while now, since v5.9. Some CIs don't have this config option enabled and this is causing issues in the tests: # ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory # [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected There is no impact in the results but the test is not doing what it is supposed to do. Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: userspace_pm: report errors with 'remove' testsMatthieu Baerts1-0/+2
A message was mentioning an issue with the "remove" tests but the selftest was not marked as failed. Directly exit with an error like it is done everywhere else in this selftest. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: userspace_pm: use correct server portMatthieu Baerts1-1/+1
"server4_port" variable is not set but "app4_port" is the server port in v4 and the correct variable name to use. The port is optional so there was no visible impact. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: sockopt: return error if wrong markMatthieu Baerts1-4/+5
When an error was detected when checking the marks, a message was correctly printed mentioning the error but followed by another one saying everything was OK and the selftest was not marked as failed as expected. Now the 'ret' variable is directly set to 1 in order to make sure the exit is done with an error, similar to what is done in other functions. While at it, the error is correctly propagated to the caller. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: sockopt: use 'iptables-legacy' if availableMatthieu Baerts1-9/+11
IPTables commands using 'iptables-nft' fail on old kernels, at least on v5.15 because it doesn't see the default IPTables chains: $ iptables -L iptables/1.8.2 Failed to initialize nft: Protocol not supported As a first step before switching to NFTables, we can use iptables-legacy if available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-05selftests: mptcp: connect: fail if nft supposed to workMatthieu Baerts1-0/+3
In case of "external" errors when preparing the environment for the TProxy tests, the subtests were marked as skipped. This is fine but it means these errors are ignored. On MPTCP Public CI, we do want to catch such issues and mark the selftest as failed if there are such issues. We can then use mptcp_lib_fail_if_expected_feature() helper that has been recently added to fail if needed. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-03selftests/net: Add xt_policy config for xfrm_policy testDaniel Díaz1-0/+1
When running Kselftests with the current selftests/net/config the following problem can be seen with the net:xfrm_policy.sh selftest: # selftests: net: xfrm_policy.sh [ 41.076721] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready [ 41.094787] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready [ 41.107635] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36 # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?) # Perhaps iptables or your kernel needs to be upgraded. # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36 # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?) # Perhaps iptables or your kernel needs to be upgraded. # SKIP: Could not insert iptables rule ok 1 selftests: net: xfrm_policy.sh # SKIP This is because IPsec "policy" match support is not available to the kernel. This patch adds CONFIG_NETFILTER_XT_MATCH_POLICY as a module to the selftests/net/config file, so that `make kselftest-merge` can take this into consideration. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: connect: fix comment typoYueh-Shun Li1-1/+1
Spell "transmissions" properly. Found by searching for keyword "tranm". Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-8-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: add pm_nl_set_endpoint helperGeliang Tang1-113/+122
This patch moves endpoint settings out of do_transfer() into a new helper pm_nl_set_endpoint(). And invoke this helper in do_transfer(). This makes the code much more clearer. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-7-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: drop sflags parameterGeliang Tang1-17/+22
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "sflags=*" instead of positional parameter sflags of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-6-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: drop addr_nr_ns1/2 parametersGeliang Tang1-73/+103
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-5-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: drop test_linkfail parameterGeliang Tang1-93/+99
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "test_linkfail=*" instead of positional parameter test_linkfail of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: set FAILING_LINKS in run_testsGeliang Tang1-6/+6
Set FAILING_LINKS as an env var with a limited scope only when calling run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-3-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: check subflow and addr infosGeliang Tang1-21/+23
New MPTCP info are being checked in multiple places to improve the code coverage when using the userspace PM. This patch makes chk_mptcp_info() more generic to be able to check subflows, add_addr_signal and add_addr_accepted info (and even more later). New arguments are now required to get different infos from the two namespaces because some counters are specific to the client or the server. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-2-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: mptcp: test userspace pm out of transferGeliang Tang1-46/+99
This patch moves userspace pm tests out of do_transfer(). Move add address test into a new function userspace_pm_add_addr(), and remove address test into userspace_pm_rm_sf_addr_ns1(). Move add subflow test into userspace_pm_add_sf() and remove subflow into userspace_pm_rm_sf_addr_ns2(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-1-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25selftests: rtnetlink: remove netdevsim device after ipsec offload testSabrina Dubroca1-0/+1
On systems where netdevsim is built-in or loaded before the test starts, kci_test_ipsec_offload doesn't remove the netdevsim device it created during the test. Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/e1cb94f4f82f4eca4a444feec4488a1323396357.1687466906.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-25/+66
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22selftests: forwarding: Fix race condition in mirror installationDanielle Ratson2-0/+8
When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent in a couple of tests, so that it is always valid. Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d") Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22selftests: mptcp: join: skip check if MIB counter not supported (part 2)Matthieu Baerts1-16/+17
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953bc9c ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added recently in the -net tree to do the required checks and return an error if the counter is not available. This commit is similar to the one with the same title applied in the -net tree but it modifies code only present in net-next for the moment, see the Fixes commit below. While at it, we can also remove the use of ${extra_msg} variable which is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n' parameter. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22selftests: mptcp: add MPTCP_FULL_INFO testcasePaolo Abeni1-2/+91
Add a testcase explicitly triggering the newly introduce MPTCP_FULL_INFO getsockopt. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 09:24:56 +0300