summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/forwarding/lib.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-10-27ipv6: When forwarding count rx stats on the orig netdevStephen Suryaputra1-0/+8
[ Upstream commit 0857d6f8c759d95f89d0436f86cdfd189ef99f20 ] Commit bdb7cc643fc9 ("ipv6: Count interface receive statistics on the ingress netdev") does not work when ip6_forward() executes on the skbs with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one. Add a selftest script to verify. Fixes: bdb7cc643fc9 ("ipv6: Count interface receive statistics on the ingress netdev") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-03selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloadsVladimir Oltean1-0/+43
Provide an example script which can be used as a skeleton for offloading TCAM rules in the Ocelot switches. Not all actions are demoed, mostly because of difficulty to automate this from a single board. For example, policing. We can set up an iperf3 UDP server and client and measure throughput at destination. But at least with DSA setups, network namespacing the individual ports is not possible because all switch ports are handled by the same DSA master. And we cannot assume that the target platform (an embedded board) has 2 other non-switch generator ports, we need to work with the generator ports as switch ports (this is the reason why mausezahn is used, and not IP traffic like ping). When somebody has an idea how to test policing, that can be added to this test. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19selftests: mlxsw: Add tc action hw_stats testsJiri Pirko1-0/+9
Add tests for mlxsw hw_stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06selftests: forwarding: ETS: Use Qdisc countersPetr Machata1-0/+10
Currently the SW-datapath ETS selftests use "ip link" stats to obtain the number of packets that went through a given band. mlxsw then uses ethtool per-priority counters. Instead, change both to use qdiscs. In SW datapath this is the obvious choice, and now that mlxsw offloads FIFO, this should work on the offloaded datapath as well. This has the effect of verifying that the FIFO offload works. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04selftests: forwarding: Convert until_counter_is() to take expressionPetr Machata1-3/+3
until_counter_is() currently takes as an argument a number and the condition holds when the current counter value is >= that number. Make the function more generic by taking a partial expression instead of just the number. Convert the two existing users. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04selftests: forwarding: lib: Add tc_rule_handle_stats_get()Petr Machata1-0/+11
The function tc_rule_stats_get() fetches a given statistic of a TC rule given the rule preference. Another common way to reference a rule is using its handle. Introduce a dual to the aforementioned function that gets a statistic given rule handle. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Use busywait helper in vxlan testDanielle Ratson1-0/+22
Vxlan test uses offload indication checks. Use a busywait helper and wait until the offload indication is set or fail if it reaches timeout. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Use busywait helper in blackhole routes testDanielle Ratson1-0/+5
Blackhole routes test uses offload indication checks. Use busywait helper and wait until the routes offload indication is set or fail if it reaches timeout. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Add a RED selftestPetr Machata1-0/+10
This tests that below the queue minimum length, there is no dropping / marking, and above max, everything is dropped / marked. The test is structured as a core file with topology and test code, and three wrappers: one for RED used as a root Qdisc, and two for testing (W)RED under PRIO and ETS. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: forwarding: lib.sh: Add start_tcp_trafficPetr Machata1-2/+13
Extract a helper __start_traffic() configurable by protocol type. Allow passing through extra mausezahn arguments. Add a wrapper, start_tcp_traffic(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Allow reading TC rule byte countersPetr Machata1-1/+2
The function tc_rule_stats_get() fetches a packet counter of a given TC rule. Extend it to support byte counters as well by adding an optional argument with selector. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Add helpers for busywaitingPetr Machata1-0/+18
The function busywait() is handy as a safety-latched variant of a while loop. Many selftests deal specifically with counter values, and busywaiting on them is likely to be rather common (it is not quite common now, but busywait() has not been around for very long). To facilitate expressing simply what is tested, introduce two helpers: - until_counter_is(), which can be used as a predicate passed to busywait(), which holds when expression, which is itself passed as an argument to until_counter_is(), reaches a desired value. - busywait_for_counter(), which is useful for waiting until a given counter changes "by" (as opposed to "to") a certain amount. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: Move two functions from mlxsw's qos_lib to libPetr Machata1-0/+24
The function humanize() is used for converting value in bits/s to a human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing hardware-specific in that, so move the function to lib.sh. Similarly for the rate() function, which just does a bit of math to calculate a rate, given two counter values and a time interval. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03selftests: mlxsw: Add a self-test for port-default priorityPetr Machata1-0/+23
Send non-IP traffic to a port and observe that it gets prioritized according to the lldptool app=$prio,1,0 rules. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19selftests: forwarding: Move start_/stop_traffic from mlxsw to lib.shPetr Machata1-0/+18
These two functions are used for starting several streams of traffic, and then stopping them later. They will be handy for the test coverage of ETS Qdisc. Move them from mlxsw-specific qos_lib.sh to the generic lib.sh. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19selftests: forwarding: lib.sh: Add wait for dev with timeoutAmit Cohen1-3/+26
Add a function that waits for device with maximum number of iterations. It enables to limit the waiting and prevent infinite loop. This will be used by the subsequent patch which will set two ports to different speeds in order to make sure they cannot negotiate a link. Waiting for all the setup is limited with 10 minutes for each device. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06selftests: test creating netdevsim inside network namespaceJiri Pirko1-1/+6
Add a test that creates netdevsim instance inside network namespace and verifies that the related devlink instance and port netdevices reside in the namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15selftests: net: push jq workaround into separate helperJiri Pirko1-0/+19
Push the jq return value workaround code into a separate helper so it could be used by the rest of the code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02selftests: forwarding: Make ping timeout configurableIdo Schimmel1-2/+5
The current timeout (2 seconds) proved to be too low for some (emulated) systems where we run the tests. Make the timeout configurable and default to 5 seconds. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28selftests: forwarding: Use OK instead of PASS in test outputIdo Schimmel1-1/+1
It is easier to distinguish "[ OK ]" from "[FAIL]" than "[PASS]". Signed-off-by: Ido Schimmel <idosch@mellanox.com> Suggested-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12selftests: forwarding: Add multicast routing testNir Dotan1-0/+2
Introduce basic testing for both IPv4 and IPv6 multicast. The test creates an (S,G) type route, sends traffic and verifies traffic arrives when the route is present and then verifies traffic does not arrive after deleting the route. This test requires smcroute - https://github.com/troglobit/smcroute which is a tool that allows creation of static multicast routes. Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20selftests: forwarding: lib: Add link_stats_rx_errors_get()Petr Machata1-2/+15
Such a function will be useful for counting malformed packets in the ECN decap test. To that end, introduce a common handler for handling stat-fetching, and reuse it in link_stats_tx_packets_get() and link_stats_rx_errors_get(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20selftests: forwarding: ping{6, }_do(): Allow passing ping argumentsPetr Machata1-2/+4
Make the ping routine more generic by allowing passing arbitrary ping command-line arguments. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20selftests: forwarding: ping{6, }_test(): Add description argumentPetr Machata1-2/+2
Have ping_test() recognize an optional argument with a description of the test. This is handy if there are several ping test, to make it clear which is which. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20selftests: forwarding: lib: Add in_ns()Petr Machata1-0/+11
In order to run a certain command inside another network namespace, it's possible to use "ip netns exec ns command". However then one can't use functions defined in lib.sh or a test suite. One option is to do "ip netns exec ns bash -c command", provided that all functions that one wishes to use (and their dependencies) are published using "export -f". That may not be practical. Therefore, introduce a helper in_ns(), which wraps a given command in a boilerplate of "ip netns exec" and "source lib.sh", thus making all library functions available. (Custom functions that a script wishes to run within a namespace still need to be exported.) Because quotes in "$@" aren't recognized in heredoc, hand-expand the array in an explicit for loop, leveraging printf %q to handle proper quoting. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20selftests: forwarding: lib: Support NUM_NETIFS of 0Petr Machata1-2/+2
So far the case of NUM_NETIFS of 0 has not been interesting. However if one wishes to reuse the lib.sh routines in a setup of a separate namespace, being able to import like this is handy. Therefore replace the {1..$NUM_NETIFS} references, which cause iteration over 1 and 0, with an explicit for loop like we do in setup_wait() and tc_offload_check(), so that for NUM_NETIFS of 0 no iteration is done. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11selftests: forwarding: Have lldpad_app_wait_set() wait for unknown, tooPetr Machata1-1/+1
Immediately after mlxsw module is probed and lldpad started, added APP entries are briefly in "unknown" state before becoming "pending". That's the state that lldpad_app_wait_set() typically sees, and since there are no pending entries at that time, it bails out. However the entries have not been pushed to the kernel yet at that point, and thus the test case fails. Fix by waiting for both unknown and pending entries to disappear before proceeding. Fixes: d159261f3662 ("selftests: mlxsw: Add test for trust-DSCP") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20selftests: forwarding: lib: Add mtu_set(), mtu_restore()Petr Machata1-0/+17
Some selftests need to tweak MTU of an interface, and naturally should at teardown restore the MTU back to the original value. Add two functions to facilitate this MTU handling: mtu_set() to change MTU value, and mtu_reset() to change it back to what it was before. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20selftests: forwarding: lib: Add ethtool_stats_get()Petr Machata1-0/+8
Add a new service function to obtain ethtool counters. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01selftests: forwarding: Move DSCP capture to lib.shPetr Machata1-0/+42
dscp_capture_install() and dscp_capture_uninstall() are going to be useful for a test added by a following patch, move them therefore to lib.sh together with related helpers. While doing so, change the rule preference from mere DSCP value to DSCP+100 in order to support adding captures of packets with DSCP of 0. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01selftests: forwarding: Move lldpad waiting to lib.shPetr Machata1-0/+21
The function lldpad_wait() will be useful for a test added by a following patch. Likewise would the "sleep 5" with its extensive comment. Therefore move lldpad_wait() to lib.sh in order to allow reuse. Rename it to lldpad_app_wait_set() to recognize that what this is intended to wait on are the pending APP sets. For the sleeping, add a function lldpad_app_wait_del(). That will serve to hold the related explanatory comment (which edit for clarity), and as a token in the caller to identify the sites where this sort of waiting takes place. That will serve when/if a better way to handle this business is found. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: Introduce $ARPINGPetr Machata1-0/+1
Instead of relying on "arping" being installed everywhere under that name, introduce a variable $ARPING like the other tools do. Convert an existing test, mirror_gre_vlan_bridge_1q.sh to require_command $ARPING and then invoke arping through the variable. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: lib: Support team devicesPetr Machata1-0/+23
Add team_create() and team_destroy() to manage team netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: lib: Add require_command()Petr Machata1-8/+11
The logic for testing whether a certain command is available is used several times in the current code base. The tests in follow-up patches add more requirements like that. Therefore extract the logic into a named function, require_command(), that can be used directly from lib.sh as well as from any test that wishes to declare dependence on some command. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24selftests: forwarding: add tests for TC chains creation adn destructionJiri Pirko1-0/+9
Add basic sanity tests for TC chains. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24selftests: forwarding: move shblock tc support check to a separate helperJiri Pirko1-0/+3
The shared block support is only needed for tc_shblock.sh. No need to require that for other test. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04selftests: forwarding: lib: extract ping and ping6 so they can be reusedNikolay Aleksandrov1-6/+16
Extract ping and ping6 command execution so the return value can be checked by the caller, this is needed for port isolation tests that are intended to fail. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: lib: Parameterize NUM_NETIFS in two functionsPetr Machata1-2/+6
setup_wait() and tc_offload_check() both assume that all NUM_NETIFS interfaces are relevant for a given test. However, the scale test script acts as an umbrella for a number of sub-tests, some of which may not require all the interfaces. Thus it's suboptimal for tc_offload_check() to query all the interfaces. In case of setup_wait() it's incorrect, because the sub-test in question of course doesn't configure any interfaces beyond what it needs, and setup_wait() then ends up waiting indefinitely for the extraneous interfaces to come up. For that reason, give setup_wait() and tc_offload_check() an optional parameter with a number of interfaces to probe. Fall back to global NUM_NETIFS if the parameter is not given. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: lib: Add check_err_fail()Petr Machata1-0/+13
In the scale testing scenarios, one usually has a condition that is expected to either fail, or pass, depending on which side of the scale is being tested. To capture this logic, add a function check_err_fail(), which dispatches either to check_err() or check_fail(), depending on the value of the first argument, should_fail. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: Allow lib.sh sourcing from other directoriesYuval Mintz1-2/+7
The devlink related scripts are mlxsw-specific. As a result, they'll reside in a different directory - but would still need the common logic implemented in lib.sh. So as a preliminary step, allow lib.sh to be sourced from other directories as well. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: lib: Avoid trapping soft devicesPetr Machata1-4/+12
There are several cases where traffic that would normally be forwarded in silicon needs to be observed in slow path. That's achieved by trapping such traffic, and the functions trap_install() and trap_uninstall() realize that. However, such treatment is obviously wrong if the device in question is actually a soft device not backed by an ASIC. Therefore try to trap if possible, but fall back to inserting a continue if not. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: lib: Split out setup_wait_dev()Petr Machata1-9/+16
Split out of setup_wait() a function setup_wait_dev() that waits for a single device. This gives tests the opportunity to wait for a selected device after they tinkered with its upness. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: lib: Extract interface-init functionsPetr Machata1-7/+25
The function simple_if_init() does two things: it creates a VRF, then moves an interface into this VRF and configures addresses. The latter comes in handy when adding more interfaces into a VRF later on. The situation is similar for simple_if_fini(). Therefore split the interface remastering and address de/initialization logic to a new pair of helpers __simple_if_init() / __simple_if_fini(), and defer to these helpers from simple_if_init() and simple_if_fini(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: tc_rule_stats_get: Parameterize directionPetr Machata1-2/+3
The GRE multipath tests need stats on an egress counter. Change tc_rule_stats_get() to take direction as an optional argument, with default of ingress. Take the opportunity to change line continuation character from | to \. Move the | to the next line, which indent. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: multipath_eval(): Improve stylePetr Machata1-35/+39
- Change the indentation of the function body from 7 spaces to one tab. - Move initialization of weights_ratio up so that it can be referenced from the error message about packet difference being zero. - Move |'s consistently to continuation line, which reindent. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: Move multipath_eval() to lib.shPetr Machata1-0/+39
This function will be useful for the GRE multipath test that is coming later. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: lib: Move here vlan_capture_{, un}install()Petr Machata1-0/+23
Move vlan_capture_install() and vlan_capture_uninstall() from mirror_vlan.sh test to lib.sh so that it can be reused in other tests. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25selftests: forwarding: lib: Extract trap_{, un}install()Petr Machata1-9/+18
A mirror-to-vlan test that's coming next needs to install the trap unconditionally. Therefore extract from slow_path_trap_{,un}install() a more generic functions trap_install() and trap_uninstall(), and covert the former two to conditional wrappers around these. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25selftests: forwarding: lib: Support VLAN devicesPetr Machata1-0/+25
Add vlan_create() and vlan_destroy() to manage VLAN netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03selftests: forwarding: Use sysctl_set(), sysctl_restore()Petr Machata1-7/+4
Instead of hand-managing the sysctl set and restore, use the wrappers sysctl_set() and sysctl_restore() to do the bookkeeping automatically. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 05:03:08 +0300