summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/drivers
AgeCommit message (Collapse)AuthorFilesLines
2025-12-18selftests: bonding: add delay before each xvlan_over_bond connectivity checkHangbin Liu1-0/+1
[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ] Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular kernel, while the tests consistently pass on a debug kernel. This suggests a timing-sensitive issue. To mitigate this, introduce a short sleep before each xvlan_over_bond connectivity check. The delay helps ensure neighbor and route cache have fully converged before verifying connectivity. The sleep interval is kept minimal since check_connection() is invoked nearly 100 times during the test. Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18selftests: bonding: add ipvlan over bond testingEtienne Champetier4-100/+98
[ Upstream commit 08ac69b24507ab06871c18adc421c9d4f1008c61 ] This rework bond_macvlan.sh into bond_macvlan_ipvlan.sh We only test bridge mode for macvlan and l2 mode ]# ./bond_macvlan_ipvlan.sh TEST: active-backup/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: active-backup/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-tlb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-tlb/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-alb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-alb/ipvlan_l2: IPv4: client->server [ OK ] ... Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> Link: https://patch.msgid.link/20250109032819.326528-3-champetier.etienne@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ↵Wang Liang1-0/+4
ethtool-common.sh [ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13selftests: drv-net: rss_ctx: make the test pass with few queuesJakub Kicinski1-2/+7
[ Upstream commit e2cf2d5baa09248d3d50b73522594b778388e3bc ] rss_ctx.test_rss_key_indir implicitly expects at least 5 queues, as it checks that the traffic on first 2 queues is lower than the remaining queues when we use all queues. Special case fewer queues. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250901173139.881070-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13selftests: drv-net: rss_ctx: fix the queue count checkJakub Kicinski1-1/+1
[ Upstream commit c158b5a570a188b990ef10ded172b8b93e737826 ] Commit 0d6ccfe6b319 ("selftests: drv-net: rss_ctx: check for all-zero keys") added a skip exception if NIC has fewer than 3 queues enabled, but it's just constructing the object, it's not actually rising this exception. Before: # Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2 not ok 1 rss_ctx.test_rss_key_indir After: ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats) Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-09selftests: drv-net: csum: fix interface name for remote hostJakub Kicinski1-2/+2
[ Upstream commit 49c2502b5946ebf454d7e16fd0189769a82b6117 ] Use cfg.remote_ifname for arguments of remote command. Without this UDP tests fail in NIPA where local interface is called enp1s0 and remote enp0s4. Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests") Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250830183842.688935-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15selftests: drv-net: Fix remote command checking in require_cmd()Gal Pressman1-1/+1
[ Upstream commit b4d52c698210ae1a3ceb487b189701bc70551a48 ] The require_cmd() method was checking for command availability locally even when remote=True was specified, due to a missing host parameter. Fix by passing host=self.remote when checking remote command availability, ensuring commands are verified on the correct host. Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env") Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01selftests: drv-net: wait for iperf client to stop sendingNimrod Oren1-5/+18
[ Upstream commit 86941382508850d58c11bdafe0fec646dfd31b09 ] A few packets may still be sent out during the termination of iperf processes. These late packets cause failures in rss_ctx.py when they arrive on queues expected to be empty. Example failure observed: Check failed 2 != 0 traffic on inactive queues (context 1): [0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...] Check failed 4 != 0 traffic on inactive queues (context 2): [0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...] Check failed 2 != 0 traffic on inactive queues (context 3): [0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...] To avoid such failures, wait until all client sockets for the requested port are either closed or in the TIME_WAIT state. Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check") Signed-off-by: Nimrod Oren <noren@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22selftests: bonding: fix incorrect mac addressHangbin Liu1-2/+2
[ Upstream commit 9318dc2357b6b8b2ea1200ab7f2d5877851b7382 ] The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54, not 33:33:00:00:02:54. The same with client maddress. Fixes: 86fb6173d11e ("selftests: bonding: add ns multicast group testing") Acked-by: Jay Vosburgh <jv@jvosburgh.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07selftests: drv-net: Check if combined-count existsJoe Damato1-4/+3
[ Upstream commit 1cbddbddee68d17feb6467fc556c144777af91ef ] Some drivers, like tg3, do not set combined-count: $ ethtool -l enp4s0f1 Channel parameters for enp4s0f1: Pre-set maximums: RX: 4 TX: 4 Other: n/a Combined: n/a Current hardware settings: RX: 4 TX: 1 Other: n/a Combined: n/a In the case where combined-count is not set, the ethtool netlink code in the kernel elides the value and the code in the test: netnl.channels_get(...) With a tg3 device, the returned dictionary looks like: {'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'}, 'rx-max': 4, 'rx-count': 4, 'tx-max': 4, 'tx-count': 1} Note that the key 'combined-count' is missing. As a result of this missing key the test raises an exception: # Exception| if channels['combined-count'] == 0: # Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^ # Exception| KeyError: 'combined-count' Change the test to check if 'combined-count' is a key in the dictionary first and if not assume that this means the driver has separate RX and TX queues. With this change, the test now passes successfully on tg3 and mlx5 (which does have a 'combined-count'). Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: netdevsim: try to close UDP port harness racesJakub Kicinski1-8/+8
[ Upstream commit 50bf398e1ceacb9a7f85bd3bdca065ebe5cb6159 ] syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19selftests: mlxsw: sharedbuffer: Ensure no extra packets are countedDanielle Ratson1-0/+40
[ Upstream commit 5f2c7ab15fd806043db1a7d54b5ec36be0bd93b1 ] The test assumes that the packet it is sending is the only packet being passed to the device. However, it is not the case and so other packets are filling the buffers as well. Therefore, the test sometimes fails because it is reading a maximum occupancy that is larger than expected. Add egress filters on $h1 and $h2 that will guarantee the above. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19selftests: mlxsw: sharedbuffer: Remove duplicate test casesDanielle Ratson1-10/+0
[ Upstream commit 6c46ad4d1bb2e8ec2265296e53765190f6e32f33 ] On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is checked on $h2 twice, when only the error message is different and does not match the check itself. Remove the two duplicated test cases from the test. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19selftests: mlxsw: sharedbuffer: Remove h1 ingress test caseDanielle Ratson1-5/+0
[ Upstream commit cf3515c556907b4da290967a2a6cbbd9ee0ee723 ] The test is sending only one packet generated with mausezahn from $h1 to $h2. However, for some reason, it is testing for non-zero maximum occupancy in both the ingress pool of $h1 and $h2. The former only passes when $h2 happens to send a packet. Avoid intermittent failures by removing unintentional test case regarding the ingress pool of $h1. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-14selftests: bonding: add ns multicast group testingHangbin Liu1-1/+53
Add a test to make sure the backup slaves join correct multicast group when arp_validate enabled and ns_ip6_target is set. Here is the result: TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] TEST: arp_validate (join mcast group) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-17Merge tag 'linux_kselftest-next-6.12-rc1' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: - test coverage for dup_fd() failure handling in unshare_fd() - new selftest for the acct() syscall - basic uprobe testcase - several small fixes and cleanups to existing tests - user and strscpy removal as they became kunit tests - fixes to build failures and warnings * tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits) selftests: kselftest: Use strerror() on nolibc selftests/timers: Remove unused NSEC_PER_SEC macro selftests:resctrl: Fix build failure on archs without __cpuid_count() selftests/ftrace: Fix eventfs ownership testcase to find mount point selftests: filesystems: fix warn_unused_result build warnings selftests:core: test coverage for dup_fd() failure handling in unshare_fd() selftests/ftrace: Fix test to handle both old and new kernels kselftest: timers: Fix const correctness selftests/ftrace: Add required dependency for kprobe tests selftests: rust: config: disable GCC_PLUGINS selftests: rust: config: add trailing newline tracing/selftests: Run the ownership test twice selftests/uprobes: Add a basic uprobe testcase selftests: harness: rename __constructor_order for clarification selftests: harness: remove unneeded __constructor_order_last() selftest: acct: Add selftest for the acct() syscall selftests: lib: remove strscpy test selftests: user: remove user suite kselftest: cpufreq: Add RTC wakeup alarm selftests/exec: Fix grammar in an error message. ...
2024-08-26net: netconsole: selftests: Create a new netconsole selftestBreno Leitao3-1/+242
Adds a selftest that creates two virtual interfaces, assigns one to a new namespace, and assigns IP addresses to both. It listens on the destination interface using socat and configures a dynamic target on netconsole, pointing to the destination IP address. The test then checks if the message was received properly on the destination interface. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.h c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops") f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC") Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct pathIdo Schimmel1-1/+2
Source the ethtool library from the correct path and avoid the following error: ./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-12selftests: drv-net: rss_ctx: test dumping RSS contextsJakub Kicinski1-2/+74
Add a test for dumping RSS contexts. Make sure indir table and key are sane when contexts are created with various combination of inputs. Test the dump filtering by ifname and start-context. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-12selftests: drv-net: rss_ctx: add identifier to traffic commentsJakub Kicinski1-2/+2
Include the "name" of the context in the comment for traffic checks. Makes it easier to reason about which context failed when we loop over 32 contexts (it may matter if we failed in first vs last, for example). Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-06selftests: harness: remove unneeded __constructor_order_last()Masahiro Yamada1-6/+0
__constructor_order_last() is unneeded. If __constructor_order_last() is not called on backward-order systems, __constructor_order will remain 0 instead of being set to _CONSTRUCTOR_ORDER_BACKWARD (= -1). __LIST_APPEND() will still take the 'else' branch, so there is no difference in the behavior. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-08-03selftests: net: ksft: replace 95 with errno.EOPNOTSUPPStanislav Fomichev2-4/+5
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95 in the new test case. Adjust existing ones to match this style. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-03selftests: net: ksft: support marking tests as disruptiveStanislav Fomichev2-2/+5
Add new @ksft_disruptive decorator to mark the tests that might be disruptive to the system. Depending on how well the previous test works in the CI we might want to disable disruptive tests by default and only let the developers run them manually. KSFT framework runs disruptive tests by default. DISRUPTIVE=False environment (or config file) can be used to disable these tests. ksft_setup should be called by the test cases that want to use new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now). In the future we can add similar decorators to, for example, avoid running slow tests all the time. And/or have some option to run only 'fast' tests for some sort of smoke test scenario. $ DISRUPTIVE=False ./stats.py KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # SKIP marked as disruptive # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0 v3: - parse yes and properly treat non-zero nums as true (Petr) v2: - convert from cli argument to env variable (Jakub) Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-03selftests: net-drv: exercise queue stats when the device is downStanislav Fomichev1-1/+24
Verify that total device stats don't decrease after it has been turned down. Also make sure the device doesn't crash when we access per-queue stats when it's down (in case it tries to access some pointers that are NULL). KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0 v3: - use errno.EOPNOTSUPP (Petr) - move qstat[0] under try (Petr) v2: - KTAP output formatting (Jakub) - defer instead of try/finally (Jakub) - disappearing stats is an error (Jakub) - ksft_ge instead of open coding (Jakub) Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20240802000309.2368-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-29selftests: drv-net: rss_ctx: check for all-zero keysJakub Kicinski1-3/+34
We had a handful of bugs relating to key being either all 0 or just reported incorrectly as all 0. Check for this in the tests. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-22Merge tag 'mm-stable-2024-07-21-14-50' of ↵Linus Torvalds1-31/+183
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ...
2024-07-17Merge tag 'net-next-6.11' of ↵Linus Torvalds7-74/+649
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
2024-07-13selftests/udmabuf: add tests to verify data after page migrationVivek Kasireddy1-31/+183
Since the memfd pages associated with a udmabuf may be migrated as part of udmabuf create, we need to verify the data coherency after successful migration. The new tests added in this patch try to do just that using 4k sized pages and also 2 MB sized huge pages for the memfd. Successful completion of the tests would mean that there is no disconnect between the memfd pages and the ones associated with a udmabuf. And, these tests can also be augmented in the future to test newer udmabuf features (such as handling memfd hole punch). The idea for these tests comes from a patch by Mike Kravetz here: https://lists.freedesktop.org/archives/dri-devel/2023-June/410623.html v1->v2: (suggestions from Shuah) - Use ksft_* functions to print and capture results of tests - Use appropriate KSFT_* status codes for exit() - Add Mike Kravetz's suggested-by tag Link: https://lkml.kernel.org/r/20240624063952.1572359-10-vivek.kasireddy@intel.com Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Junxiao Chang <junxiao.chang@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-11selftests: ifs: verify IFS ARRAY BIST functionalityPengfei Xu1-0/+8
There are two selftest scenarios for ARRAY BIST(Board Integrated System Test) tests: 1. Perform IFS ARRAY BIST tests once on each CPU. 2. Perform IFS ARRAY BIST tests on a random CPU with 3 rounds. These are not meant to be exhaustive, but are some minimal tests for for checking IFS ARRAY BIST. Reviewed-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Acked-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests: ifs: verify IFS scan test functionalityPengfei Xu1-1/+189
Two selftests are added to verify IFS scan test feature: 1. Perform IFS scan test once on each CPU using all the available image files. 2. Perform IFS scan test with the default image on a random cpu for 3 rounds. Reviewed-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Acked-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests: ifs: verify test image loading functionalityPengfei Xu1-1/+120
Scan test image files have to be loaded before starting IFS test. Verify that In Field scan driver is able to load valid test image files. Also check if loading an invalid test image file fails. Reviewed-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Acked-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests: ifs: verify test interfaces are created by the driverPengfei Xu2-0/+185
IFS (In Field Scan) driver exposes its functionality via sysfs interfaces. Applications prepare and exercise the tests by interacting with the aforementioned sysfs files. Verify that the necessary sysfs entries are created after loading the IFS driver. Initialize test variables needed for building subsequent kself-test cases. Reviewed-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Acked-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-10selftests: drv-net: rss_ctx: test flow rehashing without impacting trafficJakub Kicinski1-1/+31
Some workloads may want to rehash the flows in response to an imbalance. Most effective way to do that is changing the RSS key. Check that changing the key does not cause link flaps or traffic disruption. Disrupting traffic for key update is not incorrect, but makes the key update unusable for rehashing under load. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10selftests: drv-net: rss_ctx: check behavior of indirection table resizingJakub Kicinski1-1/+36
Some devices dynamically increase and decrease the size of the RSS indirection table based on the number of enabled queues. When that happens driver must maintain the balance of entries (preferably duplicating the smaller table). Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10selftests: drv-net: rss_ctx: test queue changes vs user RSS configJakub Kicinski1-1/+80
By default main RSS table should change to include all queues. When user sets a specific RSS config the driver should preserve it, even when queue count changes. Driver should refuse to deactivate queues used in the user-set RSS config. For additional contexts driver should still refuse to deactivate queues in use. Whether the contexts should get resized like context 0 when queue count increases is a bit unclear. I anticipate most drivers today don't do that. Since main use case for additional contexts is to set the indir table - it doesn't seem worthwhile to care about behavior of the default table too much. Don't test that. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10selftests: drv-net: rss_ctx: factor out send traffic and checkJakub Kicinski1-19/+39
Wrap up sending traffic and checking in which queues it landed in a helper. The method used for testing is to send a lot of iperf traffic and check which queues received the most packets. Those should be the queues where we expect iperf to land - either because we installed a filter for the port iperf uses, or we didn't and expect it to use context 0. Contexts get disjoint queue sets, but the main context (AKA context 0) may receive some background traffic (noise). Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10selftests: drv-net: rss_ctx: fix cleanup in the basic testJakub Kicinski1-4/+4
The basic test may fail without resetting the RSS indir table. Use the .exec() method to run cleanup early since we re-test with traffic that returning to default state works. While at it reformat the doc a tiny bit. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04selftests: drv-net: rss_ctx: allow more noise on default contextJakub Kicinski1-6/+10
As predicted by David running the test on a machine with a single interface is a bit unreliable. We try to send 20k packets with iperf and expect fewer than 10k packets on the default context. The test isn't very quick, iperf will usually send 100k packets by the time we stop it. So we're off by 5x on the number of iperf packets but still expect default context to only get the hardcoded 10k. The intent is to make sure we get noticeably less traffic on the default context. Use half of the resulting iperf traffic instead of the hard coded 10k. Link: https://patch.msgid.link/20240702233728.4183387-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-29selftests: drv-net: rss_ctx: convert to defer()Jakub Kicinski1-132/+103
Use just added defer(). Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20240627185502.3069139-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-28selftests: mlxsw: mirror_gre: Obey TESTSPetr Machata1-5/+18
This test is unusual in that overriding TESTS does not change the tests to be run. Split the individual tests into several functions and invoke them through tests_run() as appropriate. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-28selftests: mlxsw: mirror_gre: SimplifyPetr Machata1-12/+5
After the previous patch, the function test_span_failable() is always called with should_fail=1. Drop the argument and streamline the code. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-28selftests: mirror: Drop dual SW/HW testingPetr Machata2-43/+8
The mirroring tests are currently run in a skip_hw and optionally a skip_sw mode. The former tests the SW datapath, the latter the HW datapath, if available. In order to be able to test SW datapath on HW loopbacks, traps are installed on ingress to get traffic from the HW datapath to the SW one. This adds an unnecessary complexity when it would be much simpler to just use a veth-based topology to test the SW datapath. Thus drop all the code that supports this dual testing. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-28selftests: mirror: Drop direction argument from several functionsPetr Machata1-6/+6
The argument is not used by these functions except to propagate it for ultimately no purpose. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-27selftests: drv-net: rss_ctx: add tests for RSS configuration and contextsJakub Kicinski3-3/+388
Add tests focusing on indirection table configuration and creating extra RSS contexts in drivers which support it. $ export NETIF=eth0 REMOTE_... $ ./drivers/net/hw/rss_ctx.py KTAP version 1 1..8 ok 1 rss_ctx.test_rss_key_indir ok 2 rss_ctx.test_rss_context ok 3 rss_ctx.test_rss_context4 # Increasing queue count 44 -> 66 # Failed to create context 32, trying to test what we got ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32 ok 5 rss_ctx.test_rss_context_overlap ok 6 rss_ctx.test_rss_context_overlap2 # .. sprays traffic like a headless chicken .. not ok 7 rss_ctx.test_rss_context_out_of_order ok 8 rss_ctx.test_rss_context4_create_with_cfg # Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0 Note that rss_ctx.test_rss_context_out_of_order fails with the device I tested with, but it seems to be a device / driver bug. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: add ability to wait for at least N packets to load genJakub Kicinski1-7/+23
Teach the load generator how to wait for at least given number of packets to be received. This will be useful for filtering where we'll want to send a non-trivial number of packets and make sure they landed in right queues. Reviewed-by: Breno Leitao <leitao@debian.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: add helper to wait for HW stats to syncJakub Kicinski1-1/+18
Some devices DMA stats to the host periodically. Add a helper which can wait for that to happen, based on frequency reported by the driver in ethtool. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+7
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20selftests: virtio_net: add forgotten config optionsJiri Pirko1-1/+7
One may use tools/testing/selftests/drivers/net/virtio_net/config for example for vng build command like this one: $ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config In that case, the needed kernel config options are not turned on. Add the missed kernel config options. Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20240617072614.75fe79e7@kernel.org/ Reported-by: Matthieu Baerts <matttbe@kernel.org> Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/ Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10mlxsw: spectrum_acl: Fix ACL scale regression and firmware errorsIdo Schimmel1-4/+51
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and newer ASICs can share the same mask if their masks only differ in up to 8 consecutive bits. For example, consider the following filters: # tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop # tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop The second filter can use the same mask as the first (dst_ip/24) with a delta of 1 bit. However, the above only works because the two filters have different values in the common unmasked part (dst_ip/24). When entries have the same value in the common unmasked part they create undesired collisions in the device since many entries now have the same key. This leads to firmware errors such as [1] and to a reduced scale. Fix by adjusting the hash table key to only include the value in the common unmasked part. That is, without including the delta bits. That way the driver will detect the collision during filter insertion and spill the filter into the circuit TCAM (C-TCAM). Add a test case that fails without the fix and adjust existing cases that check C-TCAM spillage according to the above limitation. [1] mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available)) Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP") Reported-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 10:43:35 +0300