summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf
AgeCommit message (Collapse)AuthorFilesLines
2019-12-05selftests: bpf: correct perror stringsJakub Kicinski2-20/+20
[ Upstream commit e5dc9dd3258098bf8b5ceb75fc3433b41eff618a ] perror(str) is basically equivalent to print("%s: %s\n", str, strerror(errno)). New line or colon at the end of str is a mistake/breaks formatting. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05selftests: bpf: test_sockmap: handle file creation failures gracefullyJakub Kicinski1-0/+9
[ Upstream commit 4b67c515036313f3c3ecba3cb2babb9cbddb3f85 ] test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05bpf: Allow narrow loads of bpf_sysctl fields with offset > 0Ilya Leoshkevich1-1/+7
[ Upstream commit 7541c87c9b7a7e07c84481f37f2c19063b44469b ] "ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it reads the wrong byte, which happens to have the expected value of 0. Improve the test by seeking to the 4th byte and expecting 4 instead of 0. This makes the latent problem apparent: the test attempts to read the first byte of bpf_sysctl.file_pos, assuming this is the least-significant byte, which is not the case on big-endian machines: a non-zero offset is needed. The point of the test is to verify narrow loads, so we cannot cheat our way out by simply using BPF_W. The existence of the test means that such loads have to be supported, most likely because llvm can generate them. Fix the test by adding a big-endian variant, which uses an offset to access the least-significant byte of bpf_sysctl.file_pos. This reveals the final problem: verifier rejects accesses to bpf_sysctl fields with offset > 0. Such accesses are already allowed for a wide range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few. Extend this support to bpf_sysctl by using bpf_ctx_range instead of offsetof when matching field offsets. Fixes: 7b146cebe30c ("bpf: Sysctl hook") Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12selftests/bpf: More compatible nc options in test_tc_edtJiri Benc1-1/+1
[ Upstream commit 11875ba7f251c52effb2b924e04c2ddefa9856ef ] Out of the three nc implementations widely in use, at least two (BSD netcat and nmap-ncat) do not support -l combined with -s. Modify the nc invocation to be accepted by all of them. Fixes: 7df5e3db8f63 ("selftests: bpf: tc-bpf flow shaping with EDT") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Peter Oskolkov <posk@google.com> Link: https://lore.kernel.org/bpf/f5bf07dccd8b552a76c84d49e80b86c5aa071122.1571400024.git.jbenc@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-11selftests/bpf: adjust strobemeta loop to satisfy latest clangAndrii Nakryiko1-1/+4
[ Upstream commit 4670d68b9254710fdeaf794cad54d8b2c9929e0a ] Some recent changes in latest Clang started causing the following warning when unrolling strobemeta test case main loop: progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering [-Wpass-failed=transform-warning] This patch simplifies loop's exit condition to depend only on constant max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early termination logic inside the loop body. The changes are equivalent from program logic standpoint, but fixes the warning. It also appears to improve generated BPF code, as it fixes previously failing non-unrolled strobemeta test cases. Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-21selftests/bpf: install files test_xdp_vlan.shAnders Roxell1-1/+2
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't find file test_xdp_vlan.sh. # selftests: bpf: test_xdp_vlan_mode_generic.sh # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such file or directory Rework so that test_xdp_vlan.sh gets installed, added to the variable TEST_PROGS_EXTENDED. Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: add config fragment BPF_JITAnders Roxell1-0/+1
When running test_kmod.sh the following shows up # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_enable # # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_harden # Rework to enable CONFIG_BPF_JIT to solve "No such file or directory" Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_btf_dump with O=Ilya Leoshkevich2-0/+10
test_btf_dump fails when run with O=, because it needs to access source files and assumes they live in ./progs/, which is not the case in this scenario. Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the test directory. Since kselftest does not preserve directory structure, adjust the test to look in ./progs/ and then in ./. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_cgroup_storage on s390Ilya Leoshkevich1-3/+3
test_cgroup_storage fails on s390 with an assertion failure: packets are dropped when they shouldn't. The problem is that BPF_DW packet count is accessed as BPF_W with an offset of 0, which is not correct on big-endian machines. Since the point of this test is not to verify narrow loads/stores, simply use BPF_DW when working with packet counts. Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test") Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14selftests/bpf: fix "bind{4, 6} deny specific IP & port" on s390Ilya Leoshkevich1-2/+5
"bind4 allow specific IP & port" and "bind6 deny specific IP & port" fail on s390 because of endianness issue: the 4 IP address bytes are loaded as a word and compared with a constant, but the value of this constant should be different on big- and little- endian machines, which is not the case right now. Use __bpf_constant_ntohl to generate proper value based on machine endianness. Fixes: 1d436885b23b ("selftests/bpf: Selftest for sys_bind post-hooks.") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+28
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-11 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei. 2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii. 3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak. 4) Fix bpftool to dump an error if pinning fails, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05selftests/bpf: reduce time to execute test_xdp_vlan.shJesper Dangaard Brouer1-5/+5
Given the increasing number of BPF selftests, it makes sense to reduce the time to execute these tests. The ping parameters are adjusted to reduce the time from measures 9 sec to approx 2.8 sec. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05selftests/bpf: add wrapper scripts for test_xdp_vlan.shJesper Dangaard Brouer4-2/+24
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric) create two wrapper test scripts, that start the test_xdp_vlan.sh script with these modes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05bpf: fix XDP vlan selftests test_xdp_vlan.shJesper Dangaard Brouer1-6/+36
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP. This selftest was created together with a fix for generic XDP, in commit 297249569932 ("net: fix generic XDP to handle if eth header was mangled"). And was suppose to catch if generic XDP was broken again. The tests are using veth and assumed that veth driver didn't support native driver XDP, thus it used the (ip link set) 'xdp' attach that fell back to generic-XDP. But veth gained native-XDP support in 948d4f214fde ("veth: Add driver XDP"), which caused this test script to use native-XDP. Fixes: 948d4f214fde ("veth: Add driver XDP") Fixes: 97396ff0bc2d ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01selftests/bpf: tests for jmp to 1st insnAlexei Starovoitov1-0/+28
Add 2 tests that check JIT code generation to jumps to 1st insn. 1st test is similar to syzbot reproducer. The backwards branch is never taken at runtime. 2nd test has branch to 1st insn that executes. The test is written as two bpf functions, since it's not possible to construct valid single bpf program that jumps to 1st insn. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com>
2019-07-24selftests/bpf: add another gso_segs accessEric Dumazet1-0/+11
Use BPF_REG_1 for source and destination of gso_segs read, to exercise "bpf: fix access to skb_shared_info->gso_segs" fix. Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-22selftests/bpf: fix sendmsg6_prog on s390Ilya Leoshkevich1-2/+1
"sendmsg6: rewrite IP & port (C)" fails on s390, because the code in sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to leading IPv6 address digits, which is not the case on big-endian machines. Since checking bitwise operations doesn't seem to be the point of the test, replace two short comparisons with a single int comparison. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-18selftests/bpf: fix test_xdp_noinline on s390Ilya Leoshkevich1-8/+9
test_xdp_noinline fails on s390 due to a handful of endianness issues. Use ntohs for parsing eth_proto. Replace bswaps with ntohs/htons. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-18selftests/bpf: fix "valid read map access into a read-only array 1" on s390Ilya Leoshkevich1-1/+1
This test looks up a 32-bit map element and then loads it using a 64-bit load. This does not work on s390, which is a big-endian machine. Since the point of this test doesn't seem to be loading a smaller value using a larger load, simply use a 32-bit load. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-17selftests/bpf: fix perf_buffer on s390Ilya Leoshkevich3-17/+11
perf_buffer test fails for exactly the same reason test_attach_probe used to fail: different nanosleep syscall kprobe name. Reuse the test_attach_probe fix. Fixes: ee5cf82ce04a ("selftests/bpf: test perf buffer API") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-17selftests/bpf: structure test_{progs, maps, verifier} test runners uniformlyAndrii Nakryiko1-14/+10
It's easier to follow the logic if it's structured the same. There is just slight difference between test_progs/test_maps and test_verifier. test_verifier's verifier/*.c files are not really compilable C files (they are more of include headers), so they can't be specified as explicit dependencies of test_verifier. Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-17selftests/bpf: fix test_verifier/test_maps make dependenciesAndrii Nakryiko1-3/+3
e46fc22e60a4 ("selftests/bpf: make directory prerequisites order-only") exposed existing problem in Makefile for test_verifier and test_maps tests: their dependency on auto-generated header file with a list of all tests wasn't recorded explicitly. This patch fixes these issues. Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Fixes: 6b7b6995c43e ("selftests: bpf: tests.h should depend on .c files, not the output") Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-16selftests/bpf: skip nmi test when perf hw events are disabledIlya Leoshkevich1-1/+32
Some setups (e.g. virtual machines) might run with hardware perf events disabled. If this is the case, skip the test_send_signal_nmi test. Add a separate test involving a software perf event. This allows testing the perf event path regardless of hardware perf event support. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-16selftests/bpf: fix "alu with different scalars 1" on s390Ilya Leoshkevich1-1/+1
BPF_LDX_MEM is used to load the least significant byte of the retrieved test_val.index, however, on big-endian machines it ends up retrieving the most significant byte. Change the test to load the whole int in order to make it endianness-independent. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-16selftests/bpf: remove logic duplication in test_verifierAndrii Nakryiko1-20/+15
test_verifier tests can specify single- and multi-runs tests. Internally logic of handling them is duplicated. Get rid of it by making single run retval/data specification to be a first run spec. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Cc: Krzesimir Nowak <krzesimir@kinvolk.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: add selftests for wide loadsStanislav Fomichev1-0/+37
Mirror existing wide store tests with wide loads. The only significant difference is expected error string. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: rename verifier/wide_store.c to verifier/wide_access.cStanislav Fomichev2-36/+36
Move the file and rename internal BPF_SOCK_ADDR define to BPF_SOCK_ADDR_STORE. This selftest will be extended in the next commit with the wide loads. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: put test_stub.o into $(OUTPUT)Ilya Leoshkevich1-2/+5
Add a rule to put test_stub.o in $(OUTPUT) and change the references to it accordingly. This prevents test_stub.o from being created in the source directory. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: make directory prerequisites order-onlyIlya Leoshkevich1-8/+8
When directories are used as prerequisites in Makefiles, they can cause a lot of unnecessary rebuilds, because a directory is considered changed whenever a file in this directory is added, removed or modified. If the only thing a target is interested in is the existence of the directory it depends on, which is the case for selftests/bpf, this directory should be specified as an order-only prerequisite: it would still be created in case it does not exist, but it would not trigger a rebuild of a target in case it's considered changed. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: fix attach_probe on s390Ilya Leoshkevich1-0/+2
attach_probe test fails, because it cannot install a kprobe on a non-existent sys_nanosleep symbol. Use the correct symbol name for the nanosleep syscall on 64-bit s390. Don't bother adding one for 31-bit mode, since tests are compiled only in 64-bit mode. Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: use typedef'ed arrays as map valuesAndrii Nakryiko3-4/+4
Convert few tests that couldn't use typedef'ed arrays due to kernel bug. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-16selftests/bpf: add trickier size resolution testsAndrii Nakryiko1-0/+88
Add more BTF tests, validating that size resolution logic is correct in few trickier cases. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: fix compiling loop{1, 2, 3}.c on s390Ilya Leoshkevich3-3/+3
Use PT_REGS_RC(ctx) instead of ctx->rax, which is not present on s390. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Tested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: make PT_REGS_* work in userspaceIlya Leoshkevich1-20/+55
Right now, on certain architectures, these macros are usable only with kernel headers. This patch makes it possible to use them with userspace headers and, as a consequence, not only in BPF samples, but also in BPF selftests. On s390, provide the forward declaration of struct pt_regs and cast it to user_pt_regs in PT_REGS_* macros. This is necessary, because instead of the full struct pt_regs, s390 exposes only its first member user_pt_regs to userspace, and bpf_helpers.h is used with both userspace (in selftests) and kernel (in samples) headers. It was added in commit 466698e654e8 ("s390/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type"). Ditto on arm64. On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and arm64, x86 provides struct pt_regs to both userspace and kernel, however, with different member names. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: fix s930 -> s390 typoIlya Leoshkevich1-5/+5
Also check for __s390__ instead of __s390x__, just in case bpf_helpers.h is ever used by 32-bit userspace. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: compile progs with -D__TARGET_ARCH_$(SRCARCH)Ilya Leoshkevich1-1/+3
This opens up the possibility of accessing registers in an arch-independent way. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: do not ignore clang failuresIlya Leoshkevich1-6/+7
When compiling an eBPF prog fails, make still returns 0, because failing clang command's output is piped to llc and therefore its exit status is ignored. When clang fails, pipe the string "clang failed" to llc. This will make llc fail with an informative error message. This solution was chosen over using pipefail, having separate targets or getting rid of llc invocation due to its simplicity. In addition, pull Kbuild.include in order to get .DELETE_ON_ERROR target, which would cause partial .o files to be removed. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12selftests/bpf: fix bpf_target_sparc checkIlya Leoshkevich1-2/+2
bpf_helpers.h fails to compile on sparc: the code should be checking for defined(bpf_target_sparc), but checks simply for bpf_target_sparc. Also change #ifdef bpf_target_powerpc to #if defined() for consistency. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+91
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09selftests/bpf: fix test_reuseport_array on s390Ilya Leoshkevich1-6/+15
Fix endianness issue: passing a pointer to 64-bit fd as a 32-bit key does not work on big-endian architectures. So cast fd to 32-bits when necessary. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: fix test_attach_probe map definitionAndrii Nakryiko1-8/+5
ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") changed BTF-defined maps syntax, while independently merged 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") added new test using outdated syntax of maps. This patch fixes this test after corresponding patch sets were merged. Fixes: ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: add verifier tests for wide storesStanislav Fomichev2-3/+50
Make sure that wide stores are allowed at proper (aligned) addresses. Note that user_ip6 is naturally aligned on 8-byte boundary, so correct addresses are user_ip6[0] and user_ip6[2]. msg_src_ip6 is, however, aligned on a 4-byte bondary, so only msg_src_ip6[1] can be wide-stored. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: test perf buffer APIAndrii Nakryiko2-0/+125
Add test verifying perf buffer API functionality. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-06selftests/bpf: add test_tcp_rtt to .gitignoreStanislav Fomichev1-0/+1
Forgot to add it in the original patch. Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-06selftests/bpf: fix test_align liveliness expectationsStanislav Fomichev1-8/+8
Commit 2589726d12a1 ("bpf: introduce bounded loops") caused a change in the way some registers liveliness is reported in the test_align. Add missing "_w" to a couple of tests. Note, there are no offset changes! Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert legacy BPF maps to BTF-defined onesAndrii Nakryiko11-236/+228
Convert selftests that were originally left out and new ones added recently to consistently use BTF-defined maps. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert selftests using BTF-defined maps to new syntaxAndrii Nakryiko20-494/+300
Convert all the existing selftests that are already using BTF-defined maps to use new syntax (with no static data initialization). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: add __uint and __type macro for BTF-defined mapsAndrii Nakryiko1-0/+3
Add simple __uint and __type macro that hide details of how type and integer values are captured in BTF-defined maps. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert existing tracepoint tests to new APIsAndrii Nakryiko3-81/+32
Convert some existing tests that attach to tracepoints to use bpf_program__attach_tracepoint API instead. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: add kprobe/uprobe selftestsAndrii Nakryiko2-0/+221
Add tests verifying kprobe/kretprobe/uprobe/uretprobe APIs work as expected. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 00:37:46 +0300