summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf/progs
AgeCommit message (Collapse)AuthorFilesLines
2022-01-20Merge tag 'net-5.17-rc1' of ↵Linus Torvalds2-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf. Quite a handful of old regression fixes but most of those are pre-5.16. Current release - regressions: - fix memory leaks in the skb free deferral scheme if upper layer protocols are used, i.e. in-kernel TCP readers like TLS Current release - new code bugs: - nf_tables: fix NULL check typo in _clone() functions - change the default to y for Vertexcom vendor Kconfig - a couple of fixes to incorrect uses of ref tracking - two fixes for constifying netdev->dev_addr Previous releases - regressions: - bpf: - various verifier fixes mainly around register offset handling when passed to helper functions - fix mount source displayed for bpffs (none -> bpffs) - bonding: - fix extraction of ports for connection hash calculation - fix bond_xmit_broadcast return value when some devices are down - phy: marvell: add Marvell specific PHY loopback - sch_api: don't skip qdisc attach on ingress, prevent ref leak - htb: restore minimal packet size handling in rate control - sfp: fix high power modules without diagnostic monitoring - mscc: ocelot: - don't let phylink re-enable TX PAUSE on the NPI port - don't dereference NULL pointers with shared tc filters - smsc95xx: correct reset handling for LAN9514 - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account - phy: micrel: use kszphy_suspend/_resume for irq aware devices, avoid races with the interrupt Previous releases - always broken: - xdp: check prog type before updating BPF link - smc: resolve various races around abnormal connection termination - sit: allow encapsulated IPv6 traffic to be delivered locally - axienet: fix init/reset handling, add missing barriers, read the right status words, stop queues correctly - add missing dev_put() in sock_timestamping_bind_phc() Misc: - ipv4: prevent accidentally passing RTO_ONLINK to ip_route_output_key_hash() by sanitizing flags - ipv4: avoid quadratic behavior in netns dismantle - stmmac: dwmac-oxnas: add support for OX810SE - fsl: xgmac_mdio: add workaround for erratum A-009885" * tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys ipv4: avoid quadratic behavior in netns dismantle net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses dt-bindings: net: Document fsl,erratum-a009885 net/fsl: xgmac_mdio: Add workaround for erratum A-009885 net: mscc: ocelot: fix using match before it is set net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() net: axienet: increase default TX ring size to 128 net: axienet: fix for TX busy handling net: axienet: fix number of TX ring slots for available check net: axienet: Fix TX ring slot available check net: axienet: limit minimum TX ring size net: axienet: add missing memory barriers net: axienet: reset core on initialization prior to MDIO access net: axienet: Wait for PhyRstCmplt after core reset net: axienet: increase reset timeout bpf, selftests: Add ringbuf memory type confusion test ...
2022-01-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-6/+6
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ...
2022-01-20tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LENYafang Shao2-6/+6
As the sched:sched_switch tracepoint args are derived from the kernel, we'd better make it same with the kernel. So the macro TASK_COMM_LEN is converted to type enum, then all the BPF programs can get it through BTF. The BPF program which wants to use TASK_COMM_LEN should include the header vmlinux.h. Regarding the test_stacktrace_map and test_tracepoint, as the type defined in linux/bpf.h are also defined in vmlinux.h, so we don't need to include linux/bpf.h again. Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19bpf, selftests: Add ringbuf memory type confusion testDaniel Borkmann1-0/+32
Add two tests, one which asserts that ring buffer memory can be passed to other helpers for populating its entry area, and another one where verifier rejects different type of memory passed to bpf_ringbuf_submit(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2022-01-11bpf/selftests: Add check for updating XDP bpf_link with wrong program typeToke Høiland-Jørgensen1-0/+6
Add a check to the xdp_link selftest that the kernel rejects replacing an XDP program with a different program type on link update. v2: - Split this out into its own patch. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20220107221115.326171-3-toke@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-07bpf/selftests: Test bpf_d_path on rdonly_mem.Hao Luo1-0/+28
The second parameter of bpf_d_path() can only accept writable memories. Rdonly_mem obtained from bpf_per_cpu_ptr() can not be passed into bpf_d_path for modification. This patch adds a selftest to verify this behavior. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220106205525.2116218-1-haoluo@google.com
2022-01-07selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3Andrii Nakryiko1-2/+2
PT_REGS*() macro on some architectures force-cast struct pt_regs to other types (user_pt_regs, etc) and might drop volatile modifiers, if any. Volatile isn't really required as pt_regs value isn't supposed to change during the BPF program run, so this is correct behavior. But progs/loop3.c relies on that volatile modifier to ensure that loop is preserved. Fix loop3.c by declaring i and sum variables as volatile instead. It preserves the loop and makes the test pass on all architectures (including s390x which is currently broken). Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller5-19/+261
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30bpf/selftests: Update local storage selftest for sleepable programsKP Singh1-19/+5
Remove the spin lock logic and update the selftests to use sleepable programs to use a mix of sleepable and non-sleepable programs. It's more useful to test the sleepable programs since the tests don't really need spinlocks. Signed-off-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20211224152916.1550677-3-kpsingh@kernel.org
2021-12-19bpf/selftests: Test PTR_TO_RDONLY_MEMHao Luo1-0/+29
This test verifies that a ksym of non-struct can not be directly updated. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
2021-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+12
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16selftest/bpf: Add a test that reads various addresses.Alexei Starovoitov1-0/+12
Add a function to bpf_testmod that returns invalid kernel and user addresses. Then attach an fexit program to that function that tries to read memory through these addresses. This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-13selftests/bpf: Add tests for get_func_[arg|ret|arg_cnt] helpersJiri Olsa1-0/+123
Adding tests for get_func_[arg|ret|arg_cnt] helpers. Using these helpers in fentry/fexit/fmod_ret programs. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org
2021-12-12selftests/bpf: Add test cases for bpf_strncmp()Hou Tao1-0/+54
Four test cases are added: (1) ensure the return value is expected (2) ensure no const string size is rejected (3) ensure writable target is rejected (4) ensure no null-terminated target is rejected Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com
2021-12-12selftests/bpf: Add benchmark for bpf_strncmp() helperHou Tao1-0/+50
Add benchmark to compare the performance between home-made strncmp() in bpf program and bpf_strncmp() helper. In summary, the performance win of bpf_strncmp() under x86-64 is greater than 18% when the compared string length is greater than 64, and is 179% when the length is 4095. Under arm64 the performance win is even bigger: 33% when the length is greater than 64 and 600% when the length is 4095. The following is the details: no-helper-X: use home-made strncmp() to compare X-sized string helper-Y: use bpf_strncmp() to compare Y-sized string Under x86-64: no-helper-1 3.504 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-1 3.347 ± 0.001M/s (drops 0.000 ± 0.000M/s) no-helper-8 3.357 ± 0.001M/s (drops 0.000 ± 0.000M/s) helper-8 3.307 ± 0.001M/s (drops 0.000 ± 0.000M/s) no-helper-32 3.064 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-32 3.253 ± 0.001M/s (drops 0.000 ± 0.000M/s) no-helper-64 2.563 ± 0.001M/s (drops 0.000 ± 0.000M/s) helper-64 3.040 ± 0.001M/s (drops 0.000 ± 0.000M/s) no-helper-128 1.975 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-128 2.641 ± 0.000M/s (drops 0.000 ± 0.000M/s) no-helper-512 0.759 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-512 1.574 ± 0.000M/s (drops 0.000 ± 0.000M/s) no-helper-2048 0.329 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-2048 0.602 ± 0.000M/s (drops 0.000 ± 0.000M/s) no-helper-4095 0.117 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-4095 0.327 ± 0.000M/s (drops 0.000 ± 0.000M/s) Under arm64: no-helper-1 2.806 ± 0.004M/s (drops 0.000 ± 0.000M/s) helper-1 2.819 ± 0.002M/s (drops 0.000 ± 0.000M/s) no-helper-8 2.797 ± 0.109M/s (drops 0.000 ± 0.000M/s) helper-8 2.786 ± 0.025M/s (drops 0.000 ± 0.000M/s) no-helper-32 2.399 ± 0.011M/s (drops 0.000 ± 0.000M/s) helper-32 2.703 ± 0.002M/s (drops 0.000 ± 0.000M/s) no-helper-64 2.020 ± 0.015M/s (drops 0.000 ± 0.000M/s) helper-64 2.702 ± 0.073M/s (drops 0.000 ± 0.000M/s) no-helper-128 1.604 ± 0.001M/s (drops 0.000 ± 0.000M/s) helper-128 2.516 ± 0.002M/s (drops 0.000 ± 0.000M/s) no-helper-512 0.699 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-512 2.106 ± 0.003M/s (drops 0.000 ± 0.000M/s) no-helper-2048 0.215 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-2048 1.223 ± 0.003M/s (drops 0.000 ± 0.000M/s) no-helper-4095 0.112 ± 0.000M/s (drops 0.000 ± 0.000M/s) helper-4095 0.796 ± 0.000M/s (drops 0.000 ± 0.000M/s) Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211210141652.877186-4-houtao1@huawei.com
2021-12-11Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski14-9/+559
Andrii Nakryiko says: ==================== bpf-next 2021-12-10 v2 We've added 115 non-merge commits during the last 26 day(s) which contain a total of 182 files changed, 5747 insertions(+), 2564 deletions(-). The main changes are: 1) Various samples fixes, from Alexander Lobakin. 2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov. 3) A batch of new unified APIs for libbpf, logging improvements, version querying, etc. Also a batch of old deprecations for old APIs and various bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko. 4) BPF documentation reorganization and improvements, from Christoph Hellwig and Dave Tucker. 5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in libbpf, from Hengqi Chen. 6) Verifier log fixes, from Hou Tao. 7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong. 8) Extend branch record capturing to all platforms that support it, from Kajol Jain. 9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi. 10) bpftool doc-generating script improvements, from Quentin Monnet. 11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet. 12) Deprecation warning fix for perf/bpf_counter, from Song Liu. 13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf, from Tiezhu Yang. 14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song. 15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun, and others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits) libbpf: Add "bool skipped" to struct bpf_map libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition bpftool: Switch bpf_object__load_xattr() to bpf_object__load() selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr() selftests/bpf: Add test for libbpf's custom log_buf behavior selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load() libbpf: Deprecate bpf_object__load_xattr() libbpf: Add per-program log buffer setter and getter libbpf: Preserve kernel error code and remove kprobe prog type guessing libbpf: Improve logging around BPF program loading libbpf: Allow passing user log setting through bpf_object_open_opts libbpf: Allow passing preallocated log_buf when loading BTF into kernel libbpf: Add OPTS-based bpf_btf_load() API libbpf: Fix bpf_prog_load() log_buf logic for log_level 0 samples/bpf: Remove unneeded variable bpf: Remove redundant assignment to pointer t selftests/bpf: Fix a compilation warning perf/bpf_counter: Use bpf_map_create instead of bpf_create_map samples: bpf: Fix 'unknown warning group' build warning on Clang samples: bpf: Fix xdp_sample_user.o linking with Clang ... ==================== Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-11selftests/bpf: Add test for libbpf's custom log_buf behaviorAndrii Nakryiko1-0/+24
Add a selftest that validates that per-program and per-object log_buf overrides work as expected. Also test same logic for low-level bpf_prog_load() and bpf_btf_load() APIs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211209193840.1248570-11-andrii@kernel.org
2021-12-02selftests/bpf: Add CO-RE relocations to verifier scale test.Alexei Starovoitov1-2/+2
Add 182 CO-RE relocations to verifier scale test. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-18-alexei.starovoitov@gmail.com
2021-12-02selftests/bpf: Revert CO-RE removal in test_ksyms_weak.Alexei Starovoitov1-1/+1
The commit 087cba799ced ("selftests/bpf: Add weak/typeless ksym test for light skeleton") added test_ksyms_weak to light skeleton testing, but remove CO-RE access. Revert that part of commit, since light skeleton can use CO-RE in the kernel. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-17-alexei.starovoitov@gmail.com
2021-12-02selftests/bpf: Additional test for CO-RE in the kernel.Alexei Starovoitov1-0/+104
Add a test where randmap() function is appended to three different bpf programs. That action checks struct bpf_core_relo replication logic and offset adjustment in gen loader part of libbpf. Fourth bpf program has 360 CO-RE relocations from vmlinux, bpf_testmod, and non-existing type. It tests candidate cache logic. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-16-alexei.starovoitov@gmail.com
2021-12-02selftests/bpf: Improve inner_map test coverage.Alexei Starovoitov1-2/+14
Check that hash and array inner maps are properly initialized. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-14-alexei.starovoitov@gmail.com
2021-11-30selftest/bpf/benchs: Add bpf_loop benchmarkJoanne Koong1-0/+26
Add benchmark to measure the throughput and latency of the bpf_loop call. Testing this on my dev machine on 1 thread, the data is as follows: nr_loops: 10 bpf_loop - throughput: 198.519 ± 0.155 M ops/s, latency: 5.037 ns/op nr_loops: 100 bpf_loop - throughput: 247.448 ± 0.305 M ops/s, latency: 4.041 ns/op nr_loops: 500 bpf_loop - throughput: 260.839 ± 0.380 M ops/s, latency: 3.834 ns/op nr_loops: 1000 bpf_loop - throughput: 262.806 ± 0.629 M ops/s, latency: 3.805 ns/op nr_loops: 5000 bpf_loop - throughput: 264.211 ± 1.508 M ops/s, latency: 3.785 ns/op nr_loops: 10000 bpf_loop - throughput: 265.366 ± 3.054 M ops/s, latency: 3.768 ns/op nr_loops: 50000 bpf_loop - throughput: 235.986 ± 20.205 M ops/s, latency: 4.238 ns/op nr_loops: 100000 bpf_loop - throughput: 264.482 ± 0.279 M ops/s, latency: 3.781 ns/op nr_loops: 500000 bpf_loop - throughput: 309.773 ± 87.713 M ops/s, latency: 3.228 ns/op nr_loops: 1000000 bpf_loop - throughput: 262.818 ± 4.143 M ops/s, latency: 3.805 ns/op >From this data, we can see that the latency per loop decreases as the number of loops increases. On this particular machine, each loop had an overhead of about ~4 ns, and we were able to run ~250 million loops per second. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211130030622.4131246-5-joannekoong@fb.com
2021-11-30selftests/bpf: Measure bpf_loop verifier performanceJoanne Koong4-4/+157
This patch tests bpf_loop in pyperf and strobemeta, and measures the verifier performance of replacing the traditional for loop with bpf_loop. The results are as follows: ~strobemeta~ Baseline verification time 6808200 usec stack depth 496 processed 554252 insns (limit 1000000) max_states_per_insn 16 total_states 15878 peak_states 13489 mark_read 3110 #192 verif_scale_strobemeta:OK (unrolled loop) Using bpf_loop verification time 31589 usec stack depth 96+400 processed 1513 insns (limit 1000000) max_states_per_insn 2 total_states 106 peak_states 106 mark_read 60 #193 verif_scale_strobemeta_bpf_loop:OK ~pyperf600~ Baseline verification time 29702486 usec stack depth 368 processed 626838 insns (limit 1000000) max_states_per_insn 7 total_states 30368 peak_states 30279 mark_read 748 #182 verif_scale_pyperf600:OK (unrolled loop) Using bpf_loop verification time 148488 usec stack depth 320+40 processed 10518 insns (limit 1000000) max_states_per_insn 10 total_states 705 peak_states 517 mark_read 38 #183 verif_scale_pyperf600_bpf_loop:OK Using the bpf_loop helper led to approximately a 99% decrease in the verification time and in the number of instructions. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211130030622.4131246-4-joannekoong@fb.com
2021-11-30selftests/bpf: Add bpf_loop testJoanne Koong1-0/+112
Add test for bpf_loop testing a variety of cases: various nr_loops, null callback ctx, invalid flags, nested callbacks. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211130030622.4131246-3-joannekoong@fb.com
2021-11-29selftests/bpf: Test BPF_MAP_TYPE_PROG_ARRAY static initializationHengqi Chen1-0/+39
Add testcase for BPF_MAP_TYPE_PROG_ARRAY static initialization. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211128141633.502339-3-hengqi.chen@gmail.com
2021-11-27af_unix: Remove UNIX_ABSTRACT() macro and test sun_path[0] instead.Kuniyuki Iwashima3-4/+2
In BSD and abstract address cases, we store sockets in the hash table with keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket varies depending on its address type; sockets with BSD addresses always have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash. This is just for the UNIX_ABSTRACT() macro used to check the address type. The difference of the saved hashes comes from the first byte of the address in the first place. So, we can test it directly. Then we can keep a real hash in each socket and replace unix_table_lock with per-hash locks in the later patch. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26selftests/bpf: Mix legacy (maps) and modern (vars) BPF in one testAndrii Nakryiko1-0/+73
Add selftest that combines two BPF programs within single BPF object file such that one of the programs is using global variables, but can be skipped at runtime on old kernels that don't support global data. Another BPF program is written with the goal to be runnable on very old kernels and only relies on explicitly accessed BPF maps. Such test, run against old kernels (e.g., libbpf CI will run it against 4.9 kernel that doesn't support global data), allows to test the approach and ensure that libbpf doesn't make unnecessary assumption about necessary kernel features. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211123200105.387855-2-andrii@kernel.org
2021-11-24dccp/tcp: Remove an unused argument in inet_csk_listen_start().Kuniyuki Iwashima1-1/+1
The commit 1295e2cf3065 ("inet: minor optimization for backlog setting in listen(2)") added change so that sk_max_ack_backlog is initialised earlier in inet_dccp_listen() and inet_listen(). Since then, we no longer use backlog in inet_csk_listen_start(), so let's remove it. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Richard Sailer <richard_siegfried@systemli.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+123
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16selftests/bpf: Add uprobe triggering overhead benchmarksAndrii Nakryiko1-0/+7
Add benchmark to measure overhead of uprobes and uretprobes. Also have a baseline (no uprobe attached) benchmark. On my dev machine, baseline benchmark can trigger 130M user_target() invocations. When uprobe is attached, this falls to just 700K. With uretprobe, we get down to 520K: $ sudo ./bench trig-uprobe-base -a Summary: hits 131.289 ± 2.872M/s # UPROBE $ sudo ./bench -a trig-uprobe-without-nop Summary: hits 0.729 ± 0.007M/s $ sudo ./bench -a trig-uprobe-with-nop Summary: hits 1.798 ± 0.017M/s # URETPROBE $ sudo ./bench -a trig-uretprobe-without-nop Summary: hits 0.508 ± 0.012M/s $ sudo ./bench -a trig-uretprobe-with-nop Summary: hits 0.883 ± 0.008M/s So there is almost 2.5x performance difference between probing nop vs non-nop instruction for entry uprobe. And 1.7x difference for uretprobe. This means that non-nop uprobe overhead is around 1.4 microseconds for uprobe and 2 microseconds for non-nop uretprobe. For nop variants, uprobe and uretprobe overhead is down to 0.556 and 1.13 microseconds, respectively. For comparison, just doing a very low-overhead syscall (with no BPF programs attached anywhere) gives: $ sudo ./bench trig-base -a Summary: hits 4.830 ± 0.036M/s So uprobes are about 2.67x slower than pure context switch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211116013041.4072571-1-andrii@kernel.org
2021-11-16selftests/bpf: Add tests for restricted helpersDmitrii Banshchikov1-0/+123
This patch adds tests that bpf_ktime_get_coarse_ns(), bpf_timer_* and bpf_spin_lock()/bpf_spin_unlock() helpers are forbidden in tracing progs as their use there may result in various locking issues. Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-3-me@ubique.spb.ru
2021-11-15Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski15-12/+211
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-11-15 We've added 72 non-merge commits during the last 13 day(s) which contain a total of 171 files changed, 2728 insertions(+), 1143 deletions(-). The main changes are: 1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to BTF such that BPF verifier will be able to detect misuse, from Yonghong Song. 2) Big batch of libbpf improvements including various fixes, future proofing APIs, and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko. 3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush. 4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to ensure exception handling still works, from Russell King and Alan Maguire. 5) Add a new bpf_find_vma() helper for tracing to map an address to the backing file such as shared library, from Song Liu. 6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump, updating documentation and bash-completion among others, from Quentin Monnet. 7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as the API is heavily tailored around perf and is non-generic, from Dave Marchevsky. 8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an opt-out for more relaxed BPF program requirements, from Stanislav Fomichev. 9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits) bpftool: Use libbpf_get_error() to check error bpftool: Fix mixed indentation in documentation bpftool: Update the lists of names for maps and prog-attach types bpftool: Fix indent in option lists in the documentation bpftool: Remove inclusion of utilities.mak from Makefiles bpftool: Fix memory leak in prog_dump() selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning selftests/bpf: Fix an unused-but-set-variable compiler warning bpf: Introduce btf_tracing_ids bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs bpftool: Enable libbpf's strict mode by default docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support selftests/bpf: Clarify llvm dependency with btf_tag selftest selftests/bpf: Add a C test for btf_type_tag selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests selftests/bpf: Test libbpf API function btf__add_type_tag() bpftool: Support BTF_KIND_TYPE_TAG libbpf: Support BTF_KIND_TYPE_TAG ... ==================== Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12selftests/bpf: Add a C test for btf_type_tagYonghong Song1-0/+25
The following is the main btf_type_tag usage in the C test: #define __tag1 __attribute__((btf_type_tag("tag1"))) #define __tag2 __attribute__((btf_type_tag("tag2"))) struct btf_type_tag_test { int __tag1 * __tag1 __tag2 *p; } g; The bpftool raw dump with related types: [4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [11] STRUCT 'btf_type_tag_test' size=8 vlen=1 'p' type_id=14 bits_offset=0 [12] TYPE_TAG 'tag1' type_id=16 [13] TYPE_TAG 'tag2' type_id=12 [14] PTR '(anon)' type_id=13 [15] TYPE_TAG 'tag1' type_id=4 [16] PTR '(anon)' type_id=15 [17] VAR 'g' type_id=11, linkage=global With format C dump, we have struct btf_type_tag_test { int __attribute__((btf_type_tag("tag1"))) * __attribute__((btf_type_tag("tag1"))) __attribute__((btf_type_tag("tag2"))) *p; }; The result C code is identical to the original definition except macro's are gone. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211112012646.1508231-1-yhs@fb.com
2021-11-12selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.cYonghong Song1-4/+0
Rename progs/tag.c to progs/btf_decl_tag.c so we can introduce progs/btf_type_tag.c in the next patch. Also create a subtest for btf_decl_tag in prog_tests/btf_tag.c so we can introduce btf_type_tag subtest in the next patch. I also took opportunity to remove the check whether __has_attribute is defined or not in progs/btf_decl_tag.c since all recent clangs should already support this macro. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211112012641.1507144-1-yhs@fb.com
2021-11-11selftests/bpf: Add tests for accessing ingress_ifindex in bpf_sk_lookupMark Pashmfouroush1-0/+8
A new field was added to the bpf_sk_lookup data that users can access. Add tests that validate that the new ingress_ifindex field contains the right data. Signed-off-by: Mark Pashmfouroush <markpash@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211110111016.5670-3-markpash@cloudflare.com
2021-11-09selftests/bpf: Add exception handling selftests for tp_bpf programAlan Maguire1-0/+43
Exception handling is triggered in BPF tracing programs when a NULL pointer is dereferenced; the exception handler zeroes the target register and execution of the BPF program progresses. To test exception handling then, we need to trigger a NULL pointer dereference for a field which should never be zero; if it is, the only explanation is the exception handler ran. task->task_works is the NULL pointer chosen (for a new task from fork() no work is associated), and the task_works->func field should not be zero if task_works is non-NULL. The test verifies that task_works and task_works->func are 0. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1636131046-5982-3-git-send-email-alan.maguire@oracle.com
2021-11-07selftests/bpf: Add tests for bpf_find_vmaSong Liu3-0/+127
Add tests for bpf_find_vma in perf_event program and kprobe program. The perf_event program is triggered from NMI context, so the second call of bpf_find_vma() will return -EBUSY (irq_work busy). The kprobe program, on the other hand, does not have this constraint. Also add tests for illegal writes to task or vma from the callback function. The verifier should reject both cases. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211105232330.1936330-3-songliubraving@fb.com
2021-11-07selftests/bpf: Use explicit bpf_prog_test_load() calls everywhereAndrii Nakryiko1-1/+1
-Dbpf_prog_load_deprecated=bpf_prog_test_load trick is both ugly and breaks when deprecation goes into effect due to macro magic. Convert all the uses to explicit bpf_prog_test_load() calls which avoid deprecation errors and makes everything less magical. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/bpf/20211103220845.2676888-12-andrii@kernel.org
2021-11-07selftests/bpf: Fix non-strict SEC() program sectionsAndrii Nakryiko7-7/+7
Fix few more SEC() definitions that were previously missed. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/bpf/20211103220845.2676888-9-andrii@kernel.org
2021-11-06bpf: selftest: Trigger a DCE on the whole subprogMartin KaFai Lau1-0/+12
This patch adds a test to trigger the DCE to remove the whole subprog to ensure the verifier does not depend on a stable subprog index. The DCE is done by testing a global const. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211106014020.651638-1-kafai@fb.com
2021-11-02selftests/bpf: Add a testcase for 64-bit bounds propagation issue.Alexei Starovoitov1-0/+58
./test_progs-no_alu32 -vv -t twfw Before the 64-bit_into_32-bit fix: 19: (25) if r1 > 0x3f goto pc+6 R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0xff),s32_max_value=255,u32_max_value=255) and eventually: invalid access to map value, value_size=8 off=7 size=8 R6 max value is outside of the allowed memory range libbpf: failed to load object 'no_alu32/twfw.o' After the fix: 19: (25) if r1 > 0x3f goto pc+6 R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0x3f)) verif_twfw:OK Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211101222153.78759-3-alexei.starovoitov@gmail.com
2021-11-02selftests/bpf: Fix also no-alu32 strobemeta selftestAndrii Nakryiko1-13/+2
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries. While that works correctly, it introduces more branches, which blows up past 1 million instructions in no-alu32 variant of strobemeta selftests. Switching len variable from u32 to u64 also fixes the issue and reduces the number of validated instructions, so use that instead. Fix this patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests pass. Fixes: 0133c20480b1 ("selftests/bpf: Fix strobemeta selftest regression") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
2021-11-02selftests/bpf: Add test cases for struct_ops progHou Tao1-0/+50
Running a BPF_PROG_TYPE_STRUCT_OPS prog for dummy_st_ops::test_N() through bpf_prog_test_run(). Four test cases are added: (1) attach dummy_st_ops should fail (2) function return value of bpf_dummy_ops::test_1() is expected (3) pointer argument of bpf_dummy_ops::test_1() works as expected (4) multiple arguments passed to bpf_dummy_ops::test_2() are correct Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20211025064025.2567443-5-houtao1@huawei.com
2021-11-01selftests/bpf: Fix strobemeta selftest regressionAndrii Nakryiko1-0/+11
After most recent nightly Clang update strobemeta selftests started failing with the following error (relevant portion of assembly included): 1624: (85) call bpf_probe_read_user_str#114 1625: (bf) r1 = r0 1626: (18) r2 = 0xfffffffe 1628: (5f) r1 &= r2 1629: (55) if r1 != 0x0 goto pc+7 1630: (07) r9 += 104 1631: (6b) *(u16 *)(r9 +0) = r0 1632: (67) r0 <<= 32 1633: (77) r0 >>= 32 1634: (79) r1 = *(u64 *)(r10 -456) 1635: (0f) r1 += r0 1636: (7b) *(u64 *)(r10 -456) = r1 1637: (79) r1 = *(u64 *)(r10 -368) 1638: (c5) if r1 s< 0x1 goto pc+778 1639: (bf) r6 = r8 1640: (0f) r6 += r7 1641: (b4) w1 = 0 1642: (6b) *(u16 *)(r6 +108) = r1 1643: (79) r3 = *(u64 *)(r10 -352) 1644: (79) r9 = *(u64 *)(r10 -456) 1645: (bf) r1 = r9 1646: (b4) w2 = 1 1647: (85) call bpf_probe_read_user_str#114 R1 unbounded memory access, make sure to bounds check any such access In the above code r0 and r1 are implicitly related. Clang knows that, but verifier isn't able to infer this relationship. Yonghong Song narrowed down this "regression" in code generation to a recent Clang optimization change ([0]), which for BPF target generates code pattern that BPF verifier can't handle and loses track of register boundaries. This patch works around the issue by adding an BPF assembly-based helper that helps to prove to the verifier that upper bound of the register is a given constant by controlling the exact share of generated BPF instruction sequence. This fixes the immediate issue for strobemeta selftest. [0] https://github.com/llvm/llvm-project/commit/acabad9ff6bf13e00305d9d8621ee8eafc1f8b08 Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211029182907.166910-1-andrii@kernel.org
2021-10-29selftests/bpf: Add weak/typeless ksym test for light skeletonKumar Kartikeya Dwivedi1-1/+1
Also, avoid using CO-RE features, as lskel doesn't support CO-RE, yet. Include both light and libbpf skeleton in same file to test both of them together. In c48e51c8b07a ("bpf: selftests: Add selftests for module kfunc support"), I added support for generating both lskel and libbpf skel for a BPF object, however the name parameter for bpftool caused collisions when included in same file together. This meant that every test needed a separate file for a libbpf/light skeleton separation instead of subtests. Change that by appending a "_lskel" suffix to the name for files using light skeleton, and convert all existing users. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211028063501.2239335-7-memxor@gmail.com
2021-10-28bpf/benchs: Add benchmark tests for bloom filter throughput + false positiveJoanne Koong1-0/+153
This patch adds benchmark tests for the throughput (for lookups + updates) and the false positive rate of bloom filter lookups, as well as some minor refactoring of the bash script for running the benchmarks. These benchmarks show that as the number of hash functions increases, the throughput and the false positive rate of the bloom filter decreases. >From the benchmark data, the approximate average false-positive rates are roughly as follows: 1 hash function = ~30% 2 hash functions = ~15% 3 hash functions = ~5% 4 hash functions = ~2.5% 5 hash functions = ~1% 6 hash functions = ~0.5% 7 hash functions = ~0.35% 8 hash functions = ~0.15% 9 hash functions = ~0.1% 10 hash functions = ~0% For reference data, the benchmarks run on one thread on a machine with one numa node for 1 to 5 hash functions for 8-byte and 64-byte values are as follows: 1 hash function: 50k entries 8-byte value Lookups - 51.1 M/s operations Updates - 33.6 M/s operations False positive rate: 24.15% 64-byte value Lookups - 15.7 M/s operations Updates - 15.1 M/s operations False positive rate: 24.2% 100k entries 8-byte value Lookups - 51.0 M/s operations Updates - 33.4 M/s operations False positive rate: 24.04% 64-byte value Lookups - 15.6 M/s operations Updates - 14.6 M/s operations False positive rate: 24.06% 500k entries 8-byte value Lookups - 50.5 M/s operations Updates - 33.1 M/s operations False positive rate: 27.45% 64-byte value Lookups - 15.6 M/s operations Updates - 14.2 M/s operations False positive rate: 27.42% 1 mil entries 8-byte value Lookups - 49.7 M/s operations Updates - 32.9 M/s operations False positive rate: 27.45% 64-byte value Lookups - 15.4 M/s operations Updates - 13.7 M/s operations False positive rate: 27.58% 2.5 mil entries 8-byte value Lookups - 47.2 M/s operations Updates - 31.8 M/s operations False positive rate: 30.94% 64-byte value Lookups - 15.3 M/s operations Updates - 13.2 M/s operations False positive rate: 30.95% 5 mil entries 8-byte value Lookups - 41.1 M/s operations Updates - 28.1 M/s operations False positive rate: 31.01% 64-byte value Lookups - 13.3 M/s operations Updates - 11.4 M/s operations False positive rate: 30.98% 2 hash functions: 50k entries 8-byte value Lookups - 34.1 M/s operations Updates - 20.1 M/s operations False positive rate: 9.13% 64-byte value Lookups - 8.4 M/s operations Updates - 7.9 M/s operations False positive rate: 9.21% 100k entries 8-byte value Lookups - 33.7 M/s operations Updates - 18.9 M/s operations False positive rate: 9.13% 64-byte value Lookups - 8.4 M/s operations Updates - 7.7 M/s operations False positive rate: 9.19% 500k entries 8-byte value Lookups - 32.7 M/s operations Updates - 18.1 M/s operations False positive rate: 12.61% 64-byte value Lookups - 8.4 M/s operations Updates - 7.5 M/s operations False positive rate: 12.61% 1 mil entries 8-byte value Lookups - 30.6 M/s operations Updates - 18.9 M/s operations False positive rate: 12.54% 64-byte value Lookups - 8.0 M/s operations Updates - 7.0 M/s operations False positive rate: 12.52% 2.5 mil entries 8-byte value Lookups - 25.3 M/s operations Updates - 16.7 M/s operations False positive rate: 16.77% 64-byte value Lookups - 7.9 M/s operations Updates - 6.5 M/s operations False positive rate: 16.88% 5 mil entries 8-byte value Lookups - 20.8 M/s operations Updates - 14.7 M/s operations False positive rate: 16.78% 64-byte value Lookups - 7.0 M/s operations Updates - 6.0 M/s operations False positive rate: 16.78% 3 hash functions: 50k entries 8-byte value Lookups - 25.1 M/s operations Updates - 14.6 M/s operations False positive rate: 7.65% 64-byte value Lookups - 5.8 M/s operations Updates - 5.5 M/s operations False positive rate: 7.58% 100k entries 8-byte value Lookups - 24.7 M/s operations Updates - 14.1 M/s operations False positive rate: 7.71% 64-byte value Lookups - 5.8 M/s operations Updates - 5.3 M/s operations False positive rate: 7.62% 500k entries 8-byte value Lookups - 22.9 M/s operations Updates - 13.9 M/s operations False positive rate: 2.62% 64-byte value Lookups - 5.6 M/s operations Updates - 4.8 M/s operations False positive rate: 2.7% 1 mil entries 8-byte value Lookups - 19.8 M/s operations Updates - 12.6 M/s operations False positive rate: 2.60% 64-byte value Lookups - 5.3 M/s operations Updates - 4.4 M/s operations False positive rate: 2.69% 2.5 mil entries 8-byte value Lookups - 16.2 M/s operations Updates - 10.7 M/s operations False positive rate: 4.49% 64-byte value Lookups - 4.9 M/s operations Updates - 4.1 M/s operations False positive rate: 4.41% 5 mil entries 8-byte value Lookups - 18.8 M/s operations Updates - 9.2 M/s operations False positive rate: 4.45% 64-byte value Lookups - 5.2 M/s operations Updates - 3.9 M/s operations False positive rate: 4.54% 4 hash functions: 50k entries 8-byte value Lookups - 19.7 M/s operations Updates - 11.1 M/s operations False positive rate: 1.01% 64-byte value Lookups - 4.4 M/s operations Updates - 4.0 M/s operations False positive rate: 1.00% 100k entries 8-byte value Lookups - 19.5 M/s operations Updates - 10.9 M/s operations False positive rate: 1.00% 64-byte value Lookups - 4.3 M/s operations Updates - 3.9 M/s operations False positive rate: 0.97% 500k entries 8-byte value Lookups - 18.2 M/s operations Updates - 10.6 M/s operations False positive rate: 2.05% 64-byte value Lookups - 4.3 M/s operations Updates - 3.7 M/s operations False positive rate: 2.05% 1 mil entries 8-byte value Lookups - 15.5 M/s operations Updates - 9.6 M/s operations False positive rate: 1.99% 64-byte value Lookups - 4.0 M/s operations Updates - 3.4 M/s operations False positive rate: 1.99% 2.5 mil entries 8-byte value Lookups - 13.8 M/s operations Updates - 7.7 M/s operations False positive rate: 3.91% 64-byte value Lookups - 3.7 M/s operations Updates - 3.6 M/s operations False positive rate: 3.78% 5 mil entries 8-byte value Lookups - 13.0 M/s operations Updates - 6.9 M/s operations False positive rate: 3.93% 64-byte value Lookups - 3.5 M/s operations Updates - 3.7 M/s operations False positive rate: 3.39% 5 hash functions: 50k entries 8-byte value Lookups - 16.4 M/s operations Updates - 9.1 M/s operations False positive rate: 0.78% 64-byte value Lookups - 3.5 M/s operations Updates - 3.2 M/s operations False positive rate: 0.77% 100k entries 8-byte value Lookups - 16.3 M/s operations Updates - 9.0 M/s operations False positive rate: 0.79% 64-byte value Lookups - 3.5 M/s operations Updates - 3.2 M/s operations False positive rate: 0.78% 500k entries 8-byte value Lookups - 15.1 M/s operations Updates - 8.8 M/s operations False positive rate: 1.82% 64-byte value Lookups - 3.4 M/s operations Updates - 3.0 M/s operations False positive rate: 1.78% 1 mil entries 8-byte value Lookups - 13.2 M/s operations Updates - 7.8 M/s operations False positive rate: 1.81% 64-byte value Lookups - 3.2 M/s operations Updates - 2.8 M/s operations False positive rate: 1.80% 2.5 mil entries 8-byte value Lookups - 10.5 M/s operations Updates - 5.9 M/s operations False positive rate: 0.29% 64-byte value Lookups - 3.2 M/s operations Updates - 2.4 M/s operations False positive rate: 0.28% 5 mil entries 8-byte value Lookups - 9.6 M/s operations Updates - 5.7 M/s operations False positive rate: 0.30% 64-byte value Lookups - 3.2 M/s operations Updates - 2.7 M/s operations False positive rate: 0.30% Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-5-joannekoong@fb.com
2021-10-28selftests/bpf: Add bloom filter map test casesJoanne Koong1-0/+82
This patch adds test cases for bpf bloom filter maps. They include tests checking against invalid operations by userspace, tests for using the bloom filter map as an inner map, and a bpf program that queries the bloom filter map for values added by a userspace program. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-4-joannekoong@fb.com
2021-10-26selftests/bpf: Fix test_core_reloc_mods on big-endian machinesIlya Leoshkevich1-0/+9
This is the same as commit d164dd9a5c08 ("selftests/bpf: Fix test_core_autosize on big-endian machines"), but for test_core_reloc_mods. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211026010831.748682-7-iii@linux.ibm.com
2021-10-23selftests/bpf: Add BTF_KIND_DECL_TAG typedef example in tag.cYonghong Song1-2/+7
Change value type in progs/tag.c to a typedef with a btf_decl_tag. With `bpftool btf dump file tag.o`, we have ... [14] TYPEDEF 'value_t' type_id=17 [15] DECL_TAG 'tag1' type_id=14 component_idx=-1 [16] DECL_TAG 'tag2' type_id=14 component_idx=-1 [17] STRUCT '(anon)' size=8 vlen=2 'a' type_id=2 bits_offset=0 'b' type_id=2 bits_offset=32 ... The btf_tag selftest also succeeded: $ ./test_progs -t tag #21 btf_tag:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211021195643.4020315-1-yhs@fb.com
2021-10-23selftests/bpf: Make perf_buffer selftests work on 4.9 kernel againAndrii Nakryiko1-2/+18
Recent change to use tp/syscalls/sys_enter_nanosleep for perf_buffer selftests causes this selftest to fail on 4.9 kernel in libbpf CI ([0]): libbpf: prog 'handle_sys_enter': failed to attach to perf_event FD 6: Invalid argument libbpf: prog 'handle_sys_enter': failed to attach to tracepoint 'syscalls/sys_enter_nanosleep': Invalid argument It's not exactly clear why, because perf_event itself is created for this tracepoint, but I can't even compile 4.9 kernel locally, so it's hard to figure this out. If anyone has better luck and would like to help investigating this, I'd really appreciate this. For now, unblock CI by switching back to raw_syscalls/sys_enter, but reduce amount of unnecessary samples emitted by filter by process ID. Use explicit ARRAY map for that to make it work on 4.9 as well, because global data isn't yet supported there. Fixes: aa274f98b269 ("selftests/bpf: Fix possible/online index mismatch in perf_buffer test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022201342.3490692-1-andrii@kernel.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 23:33:44 +0300