| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which
completely disregards the cmdline passed from the bootloader/QEMU in favor
of the builtin CONFIG_CMDLINE.
However the kunit tool needs to pass arguments to the in-kernel kunit core,
for filters and other runtime parameters.
Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected.
Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de
Fixes: 8110a3cab05e ("kunit: tool: Add support for SH under QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The driver for the 8250 console is not used, as no port is found.
Instead the prom0 bootconsole is used the whole time.
The prom driver translates '\n' to '\r\n' before handing of the message
off to the firmware. The firmware performs the same translation again.
In the final output produced by QEMU each line ends with '\r\r\n'.
This breaks the kunit parser, which can only handle '\r\n' and '\n'.
Use the Zilog console instead. It works correctly, is the one documented
by the QEMU manual and also saves a bit of codesize:
Before=4051011, After=4023326, chg -0.68%
Observed on QEMU 9.2.0.
Link: https://lore.kernel.org/r/20250214-kunit-qemu-sparc-console-v1-1-ba1dfdf8f0b1@linutronix.de
Fixes: 87c9c1631788 ("kunit: tool: add support for QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.
It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.
qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.
[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/
Both SeaBIOS and qboot are x86-specific.
Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use KVM or HVF if supported by the QEMU binary and available on the
system.
This produces a nice improvement on my Apple M3 Pro running macOS 14.7:
Before:
./tools/testing/kunit/kunit.py exec --arch arm64
[HH:MM:SS] Elapsed time: 10.145s
After:
./tools/testing/kunit/kunit.py exec --arch arm64
[HH:MM:SS] Elapsed time: 1.773s
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
QEMU for LoongArch does not yet support shutdown/restart through ACPI.
Use the pvpanic driver to enable shutdowns.
This requires 9.1.0 for shutdown support in pvpanic, but that is the
requirement of kunit on LoongArch anyways.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-3-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a basic config to run kunit tests on LoongArch.
This requires QEMU 9.1.0 or later for the necessary direct kernel boot
support.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-1-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The ARCH_ and SOC_ versions of this symbol have persisted for quite a
while now in parallel. Generated .config files from previous LTS kernels
should have both. Finally remove SOC_VIRT and update all config files
using it.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
While it probably doesn't make a huge difference given the current KUnit
coverage we will get the best coverage of arm64 architecture features if
we specify -cpu=max rather than picking a specific CPU, this will include
all architecture features that qemu supports including many which have not
yet made it into physical implementations.
Due to performance issues emulating the architected pointer authentication
algorithm it is recommended to use the implementation defined algorithm
that qemu has instead, this should make no meaningful difference to the
coverage and will run the tests faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add basic support to run SH under QEMU via kunit_tool using the
virtualized r2d platform.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add basic support to run m68k under QEMU via kunit_tool.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When running a RISC-V test kernel under QEMU, we need an OpenSBI BIOS
file. In the original QEMU support patchset, kunit_tool would optionally
download this file from GitHub if it didn't exist, using wget.
These days, it can usually be found in the distro's qemu-system-riscv
package, and is located in /usr/share/qemu on all the distros I tried
(Debian, Arch, OpenSUSE). Use this file, and thereby don't do any
downloading in kunit_tool.
In addition, we used to shell out to whatever 'wget' was in the path,
which could have potentially been used to trick the developer into
running another binary. By not using wget at all, we nicely sidestep
this issue.
Cc: Xu Panda <xu.panda@zte.com.cn>
Fixes: 87c9c1631788 ("kunit: tool: add support for QEMU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Note: this potentially breaks custom qemu_configs if people are using
them! But the fix for them is simple, don't specify multiple arguments
in one string and don't add on a redundant ''.
It feels a bit iffy to be using a shell in the first place.
There's the usual shenanigans where people could pass in arbitrary shell
commands via --kernel_arg (since we're just adding '' around the
kernel_cmdline) or via a custom qemu_config.
This isn't too much of a concern given the nature of this script (and
the qemu_config file is in python, you can do w/e you want already).
But it does have some other drawbacks.
One example of a kunit-specific pain point:
If the relevant qemu binary is missing, we get output like this:
> /bin/sh: line 1: qemu-system-aarch64: command not found
This in turn results in our KTAP parser complaining about
missing/invalid KTAP, but we don't directly show the error!
It's even more annoying to debug when you consider --raw_output only
shows KUnit output by default, i.e. you need --raw_output=all to see it.
Whereas directly invoking the binary, Python will raise a
FileNotFoundError for us, which is a noisier but more clear.
Making this change requires
* splitting parameters like ['-m 256'] into ['-m', '256'] in
kunit/qemu_configs/*.py
* change [''] to [] in kunit/qemu_configs/*.py since otherwise
QEMU fails w/ 'Device needs media, but drive is empty'
* dropping explicit quoting of the kernel cmdline
* using shlex.quote() when we print what command we're running
so the user can copy-paste and run it
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add basic support to run QEMU via kunit_tool. Add support for i386,
x86_64, arm, arm64, and a bunch more.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
