| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit bc6e165a452da909cef0efbc286e6695624db372 ]
PRE_KTEST can be useful for setting up the environment and POST_KTEST to
tear it down, however POST_KTEST only runs on the normal end-of-run path.
It is skipped when ktest exits through dodie() or cancel_test(). Final
cleanup hooks are skipped.
Factor the final hook execution into run_post_ktest(), call it from the
normal exit path and from the early exit paths, and guard it so the hook
runs at most once.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-8-565d412f4925@suse.com
Fixes: 921ed4c7208e ("ktest: Add PRE/POST_KTEST and TEST options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2de57a3c8192dcd67cccaff6c341b93748d799b ]
A per-test override can clear an inherited default option by assigning an
empty value, but __set_test_option() still used option_defined() to decide
whether a per-test key existed. That turned an empty per-test assignment
back into "fall back to the default", so tests still could not clear
inherited settings.
For example:
DEFAULTS
(...)
LOG_FILE = /tmp/ktest-empty-override.log
CLEAR_LOG = 1
ADD_CONFIG = /tmp/.config
TEST_START
TEST_TYPE = build
BUILD_TYPE = nobuild
ADD_CONFIG =
This would run the test with ADD_CONFIG[1] = /tmp/.config
Fix by checking whether the per-test key exists before falling back. If it
does exist but is empty, treat it as unset for that test and stop the
fallback chain there.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-4-565d412f4925@suse.com
Fixes: 22c37a9ac49d ("ktest: Allow tests to undefine default options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 057854f8a595160656fe77ed7bf0d2403724b915 ]
check_buildlog() probes $warnings_file with -f even when WARNINGS_FILE is
not configured. Perl warns about the uninitialized value and adds noise to
the test log, which can hide the output we actually care about.
Check that WARNINGS_FILE is defined before testing whether the file exists.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-1-565d412f4925@suse.com
Fixes: 4283b169abfb ("ktest: Add make_warnings_file and process full warnings")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 768059ede35f197575a38b10797b52402d9d4d2f upstream.
The Perl localtime() function returns the month starting at 0 not 1. This
caused the date produced to create the directory for saving files of a
failed run to have the month off by one.
machine-test-useconfig-fail-20260314073628
The above happened in April, not March. The correct name should have been:
machine-test-useconfig-fail-20260414073628
This was somewhat confusing.
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142426.33ad0293@fedora
Fixes: 7faafbd69639b ("ktest: Add open and close console and start stop monitor")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3042cbe84a060b4df764eb6c5300bbe20d125ca upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When testing a series of commits that also includes changes to the Linux
tools directory, it is useless to test the changes in tools as they may
not affect the kernel itself. Doing tests on the kernel for changes that
do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be skipped
while doing the individual commit tests.
For example, the runtime verification may have a series of commits like:
$ git log --abbrev-commit --pretty=oneline fac5493251a6~1..HEAD
3d3800b4f7f4 rv: Remove rv_reactor's reference counter
3d3c376118b5 rv: Merge struct rv_reactor_def into struct rv_reactor
24cbfe18d55a rv: Merge struct rv_monitor_def into struct rv_monitor
b0c08dd5348d rv: Remove unused field in struct rv_monitor_def
58d5f0d437a8 (debiantesting-x86-64/trace/rv/core) rv: Return init error when registering monitors
560473f2e2d7 verification/rvgen: Organise Kconfig entries for nested monitors
9efcf590827c tools/dot2c: Fix generated files going over 100 column limit
1160ccaf772f tools/rv: Stop gracefully also on SIGTERM
f60227f34489 tools/rv: Do not skip idle in trace
f3735df6281e verification/rvgen: Do not generate unused variables
6fb37c2a27eb verification/rvgen: Generate each variable definition only once
8cfcf9b0e92f verification/rvgen: Support the 'next' operator
fac5493251a6 rv: Allow to configure the number of per-task monitor
Where the first commit touches the kernel followed by a series of commits
that do not, and ends with commits that do. Instead of having to add
multiple patchcheck tests to handle the gaps, just include the commits
that should not be tested:
$ git log --abbrev-commit --pretty=oneline fac5493251a6~1..HEAD |
grep -e verification -e tools/ | cut -d' ' -f1 |
while read a ; do echo -n "$a "; done
560473f2e2d7 9efcf590827c 1160ccaf772f f60227f34489 f3735df6281e 6fb37c2a27eb 8cfcf9b0e92f
Then set PATCHCHECK_SKIP to that, and those commits will be skipped.
PATCHCHECK_SKIP = 560473f2e2d7 9efcf590827c 1160ccaf772f f60227f34489 f3735df6281e 6fb37c2a27eb 8cfcf9b0e92f
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250725112153.1dd06b84@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
As ktest.pl can run in various different directories, to make sure the
test is running in the proper directory with the proper source and proper
destination directory, display the content of BUILD_DIR and OUTPUT_DIR at
the start of every test.
This can be helpful for the test runner to stop the test if a test is
running in the wrong location instead of finding out after the test has
completed.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.898022631@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Allow -DBUILD_TYPE=boot work the same as -D BUILD_TYPE=boot just like
normal single character option does in most applications.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.567246162@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently -D only updates the persistent options that are defined with
"=". Allow it to also override all temp variables that are defined with
":=".
ktest.pl -D 'USE_TEMP_DIR:=1' -D 'TEST_TYPE[2]=build' config
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.399653933@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add -D option that lets the user override options in the config.
For instance, if the config has: BUILD_NOCLEAN=1 which prevents mrproper
from being called before builds, and the user wants to call it once. The
user can run:
ktest -D BUILD_NOCLEAN=0 config
And the default "BUILD_NOCLEAN" options will be disabled.
If the user wants to change the second test to do a build and not boot,
the user can run:
ktest -D 'TEST_TYPE[2]=build' config
Where the '[#]' is for the test to assign the variable for. In the above
example, it will happen on test 2.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.231478909@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Handle missing parent directories for LOG_FILE path to prevent test
failures. If the parent directories don't exist, create them to ensure
the tests proceed successfully.
Cc: <warthog9@eaglescrag.net>
Link: https://lore.kernel.org/20250307043854.2518539-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There is a spelling mistake of 'accesing' in comments which should
be 'accessing'.
Fixes: 6d76f469c8ac9 ("ktest: Add useful example configs")
Link: https://lore.kernel.org/8714AE3735C0EA0B+20241218140437.194906-1-wangyuli@uniontech.com
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
"on of these" should be "one of these".
Fixes: 77d942ceacbad ("ktest: Create variables for the ktest config files")
Link: https://lore.kernel.org/20240902124645.5674-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Since $output and $ret are not used in the subsequent code, the declarations
should be removed.
Fixes: a75fececff3c ("ktest: Added sample.conf, new %default option format")
Link: https://lore.kernel.org/20240902130735.6034-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.
Cc: stable@vger.kernel.org
Cc: John Hawley <warthog9@eaglescrag.net>
Fixes: 5f9b6ced04a4e ("ktest: Bisecting, install modules, add logging")
Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com
Signed-off-by: Ricardo B. Marliere <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Some distros have grub2 config files with the lines
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
which match the skip regex defined for grub2 in get_grub_index():
$skip = '^\s*menuentry';
These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.
Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.
Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If a warning happens at build, give a warning at the end:
Build time: 1 minute 40 seconds
Install time: 17 seconds
Reboot time: 25 seconds
*** WARNING found in build: 1 ***
*******************************************
*******************************************
KTEST RESULT: TEST 1 SUCCESS!!!! **
*******************************************
*******************************************
This way, even if the test isn't made to fail on warnings during the
build, a message is still displayed that warnings were found.
Link: https://lore.kernel.org/<20240819172028.3a7fae09@gandalf.local.home>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.
Link: https://lkml.kernel.org/r/20240315-ktest-v2-1-c5c20a75f6a3@marliere.net
Cc: John Hawley <warthog9@eaglescrag.net>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Allow a variable to contain another variable. This will allow the
${shell <command>} to have its command include variables.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The do_send_email() will call die before restoring stty if sendmail
setting is not correct or sendmail is not installed. It is safer to
restore it in the beginning of dodie().
Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Allow variables to execute shell commands. Note, these are processed when
they are first seen while parsing the config file. This is useful if you
have the same config file used for multiple hosts (as they may be in a git
repository).
HOSTNAME := ${shell hostname}
DEFAULTS IF "${HOSTNAME}" == "frodo"
Link: https://lkml.kernel.org/r/20221207212944.277ee850@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.
With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.
Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update ktest example for the boot-time tracing with histogram
options. Note that since the histogram option uses "trace()" action
instead of "EVENT()", this updates the matching pattern too.
Link: https://lkml.kernel.org/r/162856130208.203126.4458319094852152589.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
bootconfig is a new feature that appends scripts onto the initrd, and the
kernel executes the scripts as an extended kernel command line.
Need to add tests to test that the happened. To test the bootconfig
properly, the initrd needs to be updated and the kernel rebooted. ktest is
the perfect solution to perform these tests.
Add a example bootconfig.conf in the tools/testing/ktest/examples/include
and example bootconfig scripts in tools/testing/ktest/examples/bootconfig
and also include verifier scripts that ktest will install on the target
and run to make sure that the bootconfig options in the scripts took place
after the target rebooted with the new initrd update.
Link: https://lkml.kernel.org/r/20210618112647.6a81dec5@oasis.local.home
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Perl, as with most scripting languages, is fairly flexible in how /
where you can define things, and it will (for the most part) do what you
would expect it to do. This however can lead to situations, like with
ktest, where things get muddled over time.
This pushes the variable definitions back up to the top, followed by
functions, with the main script executables down at the bottom, INSTEAD
of being somewhat mish-mashed together in certain places. This mostly
has the advantage of making it more obvious where things are initially
defined, what functions are there, and ACTUALLY where the main script
starts executing, and should make this a little more approachable.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This cleans up some additional whitespace pieces that to be more
consistent, as well as moving a curly brace around, and some 'or'
statements to match the rest of the file (usually or goes at the
end of the line vs. at the beginning)
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This is a followup to "ktest: Adding editor hints to improve
consistency" to actually adjust the existing indentation to match
the, now, expected pattern (first column 4 spaces, 2nd tab, 3rd
tab + 4 spaces, etc). This should, at least help, keep things
consistent going forward now.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Emacs and Vi(m) have different styles of dealing with perl syntax
which can lead to slightly inconsistent indentation, and makes the
code slightly harder to read. Emacs assumes a more perl recommended
standard of 4 spaces (1 column) or tab (two column) indentation.
Vi(m) tends to favor just normal spaces or tabs depending on what
was being used.
This gives the basic hinting to Emacs and Vim to do what is
expected to be basically consistent.
Emacs:
- Explicitly flip into perl mode, cperl would require
more adjustments
Vi(m):
- Set softtabs=4 which will flip it over to doing
indentation the way you would expect from Emacs
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This duplicates the KVM/Qemu config with specific notes for how
to use it with VMware VMs on Workstation, Player, or Fusion.
The main thing to be aware of is how the serial port is exposed
which is a unix pipe, and will need something like ncat to get
into ktest's monitoring
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
|
|
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The logic for truncating the log file for emailing based on the
MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the
tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org
Fixes: 855d8abd2e8ff ("ktest.pl: Change the logic to control the size of the log file emailed")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the size of the error log is too big to send via email, and the sending
fails, it wont email any result. This can be confusing for the user who is
waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that
it failed to send an email. Obviously this will not be of use if the sending
of email failed for some other reasons, but it will at least give the user
some information when it fails for the most common reason.
Cc: stable@vger.kernel.org
Fixes: c2d84ddb338c8 ("ktest.pl: Add MAIL_COMMAND option to define how to send email")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This issue was first noticed when I was testing different kernels on
Oracle Linux 8 which as Fedora 30+ adopts BLS as default. Even though a
kernel entry was added successfully and the index of that kernel entry was
retrieved correctly, ktest still wouldn't reboot the system into
user-specified kernel.
The bug was spotted in subroutine reboot_to where the if-statement never
checks for REBOOT_TYPE "grub2bls", therefore the desired entry will not be
set for the next boot.
Add a check for "grub2bls" so that $grub_reboot $grub_number can
be run before a reboot if REBOOT_TYPE is "grub2bls" then we can boot to
the correct kernel.
Link: https://lkml.kernel.org/r/20201121021243.1532477-1-libo.chen@oracle.com
Cc: stable@vger.kernel.org
Fixes: ac2466456eaa ("ktest: introduce grub2bls REBOOT_TYPE option")
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Have config-bisect save the good/bad configs at each step.
- Show log file location even on success
- Add PRE_TEST_DIE to kill test if the PRE_TEST fails
- Add a NOT operator for conditionals in config file
- Add the log output of the last test when emailing on failure.
- Other minor clean ups and small fixes.
* tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
ktest.pl: Change the logic to control the size of the log file emailed
ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
ktest.pl: Add the log of last test in email on failure
ktest.pl: Turn off buffering to the log file
ktest.pl: Just open up the log file once
ktest.pl: Add a NOT operator
ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
ktest.pl: Always show log file location if defined even on success
ktest.pl: Have config-bisect save each config used in the bisect
|
|
There is a spelling mistake in an error message. Fix it.
Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the log file for a given test is larger than the max size given then use
set the seek from the end of the log file instead of from the start of the
test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200726120752.16768-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the ktest config option MAIL_MAX_SIZE that will limit the size of the
log file that is placed into the email on failure.
Link: https://lore.kernel.org/r/20200701231756.790637968@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a failure happens and an email is sent, show the contents of the log of
the last test that failed in the email.
Link: http://lore.kernel.org/r/20200701231756.619246244@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The log file should be up to date to whatever is happening in ktest.
Disable buffering to the LOG output file handle.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, every write to the log file is done by opening the file, writing
to it, then closing the file. This rather expensive. Just open it at the
beginning and close it at the end.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There is a NOT DEFINED operator, but there is not an operator that can
negate any other expression.
For example: NOT (${FOO} == boot || ${BAR} == run)
Add the keyword NOT to allow the ktest.pl config files to negate operators.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, if a PRE_TEST is defined and ran, but fails, there's nothing
currently available to make the test fail too. Add a PRE_TEST_DIE option that
when set, if a PRE_TEST is defined and fails, the test will die too.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
