| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0,
allowing systems to offline cpu0.
But when cpu0 is offline, cpupower monitor will not display all
processor and Mperf information:
[root@intel-skylake-dh-03 cpupower]# ./cpupower monitor
WARNING: at least one cpu is offline
|Idle_Stats
CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S
4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13
1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26
5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50
2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84
6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00
3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99
7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70
This patch replaces the hard-coded use of cpu0 in cpupower with the
current cpu, allowing it to run without a cpu0.
After the patch is applied,
[root@intel-skylake-dh-03 cpupower]# ./cpupower monitor
WARNING: at least one cpu is offline
|Nehalem || Mperf || Idle_Stats
CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S
4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52
1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88
5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50
2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00
6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99
3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13
7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57
There are some minor cleanups included in this patch.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some operations, like frequency-set, need root privileges. However,
the way that this is detected is not correct. The getuid() is called,
while in fact geteuid() should be. This way we can allow
distributions or users to set SETUID flags on the cpupower binary if
they want to and let regular users change the cpu frequency governor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
available
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Example:
cpupower idle-set -d 3
will disable C-state 3 on all processors (set commands are active on
all CPUs by default), same as:
cpupower -c all idle-set -d 3
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of printing something non-formatted to stdout, call
man(1) to show the man page for the proper subcommand.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
CPU power consumption vs performance tuning is no longer
limited to CPU frequency switching anymore: deep sleep states,
traditional dynamic frequency scaling and hidden turbo/boost
frequencies are tied close together and depend on each other.
The first two exist on different architectures like PPC, Itanium and
ARM, the latter (so far) only on X86. On X86 the APU (CPU+GPU) will
only run most efficiently if CPU and GPU has proper power management
in place.
Users and Developers want to have *one* tool to get an overview what
their system supports and to monitor and debug CPU power management
in detail. The tool should compile and work on as many architectures
as possible.
Once this tool stabilizes a bit, it is intended to replace the
Intel-specific tools in tools/power/x86
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
