summaryrefslogtreecommitdiff
path: root/tools/perf/util/probe-event.h
AgeCommit message (Collapse)AuthorFilesLines
2015-05-27perf probe: Show the error reason comes from invalid DSOMasami Hiramatsu1-3/+0
Show the reason of error when dso__load* fails. This shows when user gives wrong kernel image or wrong path. Without this, perf probe shows an obscure message: ---- $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read Failed to find path of kernel module. Error: Failed to show lines. ---- With this, perf shows appropriate error message: ---- $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read Failed to find the path for kernel: Mismatching build id Error: Failed to show lines. ---- And: ---- $ perf probe -k /non-exist/kernel/vmlinux -L vfs_read Failed to find the path for kernel: No such file or directory Error: Failed to show lines. ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Link: http://lkml.kernel.org/r/20150527083718.23880.84100.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-12perf probe: Add --range option to show a variable's location rangeHe Kuang1-0/+1
It is not easy for users to get the accurate byte offset or the line number where a local variable can be probed. With '--range' option, local variables in the scope of the probe point are showed with a byte offset range, and can be added according to this range information. For example, there are some variables in the function generic_perform_write(): <generic_perform_write@mm/filemap.c:0> 0 ssize_t generic_perform_write(struct file *file, 1 struct iov_iter *i, loff_t pos) 2 { 3 struct address_space *mapping = file->f_mapping; 4 const struct address_space_operations *a_ops = mapping->a_ops; ... 42 status = a_ops->write_begin(file, mapping, pos, bytes, flags, &page, &fsdata); 44 if (unlikely(status < 0)) But we fail when we try to probe the variable 'a_ops' at line 42 or 44. $ perf probe --add 'generic_perform_write:42 a_ops' Failed to find the location of a_ops at this address. Perhaps, it has been optimized out. This is because the source code do not match the assembly, so a variable may not be available in the source code line where it appears. After this patch, we can lookup the accurate byte offset range of a variable, 'INV' indicates that this variable is not valid at the given point, but available in the scope: $ perf probe --vars 'generic_perform_write:42' --range Available variables at generic_perform_write:42 @<generic_perform_write+141> [INV] ssize_t written @<generic_perform_write+[324-331]> [INV] struct address_space_operations* a_ops @<generic_perform_write+[55-61,170-176,223-246]> [VAL] (unknown_type) fsdata @<generic_perform_write+[70-307,346-411]> [VAL] loff_t pos @<generic_perform_write+[0-286,286-336,346-411]> [VAL] long int status @<generic_perform_write+[83-342,346-411]> [VAL] long unsigned int bytes @<generic_perform_write+[122-311,320-338,346-403,403-411]> [VAL] struct address_space* mapping @<generic_perform_write+[35-344,346-411]> [VAL] struct iov_iter* i @<generic_perform_write+[0-340,346-411]> [VAL] struct page* page @<generic_perform_write+[70-307,346-411]> Then it is more clear for us to add a probe with this variable: $ perf probe --add 'generic_perform_write+170 a_ops' Added new event: probe:generic_perform_write (on generic_perform_write+170 with a_ops) Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1431336304-16863-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf probe: Support glob wildcards for function nameMasami Hiramatsu1-0/+1
Support glob wildcards for function name when adding new probes. This will allow us to build caches of function-entry level information with $params. e.g. ---- # perf probe --no-inlines --add 'kmalloc* $params' Added new events: probe:kmalloc_slab (on kmalloc* with $params) probe:kmalloc_large_node (on kmalloc* with $params) probe:kmalloc_order_trace (on kmalloc* with $params) You can now use it in all perf tools, such as: perf record -e probe:kmalloc_order_trace -aR sleep 1 # perf probe --list probe:kmalloc_large_node (on kmalloc_large_node@mm/slub.c with size flags node) probe:kmalloc_order_trace (on kmalloc_order_trace@mm/slub.c with size flags order) probe:kmalloc_slab (on kmalloc_slab@mm/slab_common.c with size flags) ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150508010335.24812.19972.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf probe: Add --no-inlines option to avoid searching inline functionsMasami Hiramatsu1-0/+1
Add --no-inlines(--inlines) option to avoid searching inline functions. Searching all functions which matches glob pattern can take a long time and find a lot of inline functions. With this option perf-probe searches target on the non-inlined functions. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150508010333.24812.86568.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf probe: Introduce probe_conf global configsMasami Hiramatsu1-4/+9
Introduce probe_conf global configuration parameters for probe-event and probe-finder, and removes related parameters from APIs. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150508010330.24812.21095.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf probe: Use perf_probe_event.target instead of passing as an argumentMasami Hiramatsu1-2/+2
Use perf_probe_event.target field for the target binary instead of passing it as an argument. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150508010328.24812.67887.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-06perf probe: Allow to use filter on --del commandMasami Hiramatsu1-1/+1
This makes perf-probe --del option to accept filter rules not only simple glob pattern. This simplifies the code and improve the flexibility. E.g. if we remove 2 different pattern events, we need 2 -d options. ---- # ./perf probe -d vfs\* -d malloc Removed event: probe_libc:malloc Removed event: probe:vfs_read ---- This allows you to joint the 2 patterns with '|'. ---- # ./perf probe -d 'vfs*|malloc' Removed event: probe:vfs_read Removed event: probe_libc:malloc ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150505022948.23399.4197.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-04perf probe: Accept filter argument for --listMasami Hiramatsu1-1/+1
Currently, perf-probe --list option ignores given event filter. ---- # ./perf probe -l vfs\* probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c) probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so) ---- This changes --list option to accept the event filter argument as below. ---- # ./perf probe -l vfs\* probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c) # ./perf probe -l \*libc:\* probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so) ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150424094750.23967.53868.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-04perf probe ppc64le: Fixup function entry if using kallsyms lookupNaveen N. Rao1-0/+2
On powerpc ABIv2, if no debug-info is found and we use kallsyms, we need to fixup the function entry to point to the local entry point. Use offset of 8 since current toolchains always generate 2 instructions (8 bytes). Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/92253021e77a104b23b615c8c23bf9501dfe60bf.1430217967.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-04perf probe ppc64le: Prefer symbol table lookup over DWARFNaveen N. Rao1-0/+1
Use symbol table lookups by default if DWARF is not necessary, since powerpc ABIv2 encodes local entry points in the symbol table and the function entry address in DWARF may not be appropriate for kprobes, as described here: https://sourceware.org/bugzilla/show_bug.cgi?id=17638 "The DWARF address ranges deliberately include the *whole* function, both global and local entry points." ... "If you want to set probes on a local entry point, you should look up the symbol in the main symbol table (not DWARF), and check the st_other bits; they will indicate whether the function has a local entry point, and what its offset from the global entry point is. Note that GDB does the same when setting a breakpoint on a function entry." Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/88a10e22f4aaba2aef812824ca4b10d7beeea012.1430217967.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10perf probe: Support multiple probes on different binariesMasami Hiramatsu1-3/+3
Support multiple probes on different binaries with just one command. In the result, this example sets up the probes on icmp_rcv in kernel, on main and set_target in perf, and on pcspkr_event in pcspker.ko driver. ----- # perf probe -a icmp_rcv -x ./perf -a main -a set_target \ -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \ -a pcspkr_event Added new event: probe:icmp_rcv (on icmp_rcv) You can now use it in all perf tools, such as: perf record -e probe:icmp_rcv -aR sleep 1 Added new event: probe_perf:main (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:main -aR sleep 1 Added new event: probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:set_target -aR sleep 1 Added new event: probe:pcspkr_event (on pcspkr_event in pcspkr) You can now use it in all perf tools, such as: perf record -e probe:pcspkr_event -aR sleep 1 ----- Reported-by: Arnaldo Carvalho de Melo <acme@infradead.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150401102539.17137.46454.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-18perf probe: Do not access kallsyms when analyzing user binariesMasami Hiramatsu1-1/+2
Do not access kallsyms to show available variables and show source lines in user binaries. This behavior always requires the root privilege when sysctl sets kernel.kptr_restrict=1, but we don't need it just for analyzing user binaries. Without this patch (by normal user, kptr_restrict=1): ---- $ perf probe -x ./perf -V add_cmdname Failed to init vmlinux path. Error: Failed to show vars. $ perf probe -x ./perf -L add_cmdname Failed to init vmlinux path. Error: Failed to show lines. ---- With this patch: ---- $ perf probe -x ./perf -V add_cmdname Available variables at add_cmdname @<perf_unknown_cmd_config+144> (No matched variables) @<list_commands_in_dir+160> (No matched variables) @<add_cmdname+0> char* name size_t len struct cmdnames* cmds $ perf probe -x ./perf -L add_cmdname <add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0> 0 void add_cmdname(struct cmdnames *cmds, const char *name, size_t len) 1 { 2 struct cmdname *ent = malloc(sizeof(*ent) + len + 1); 4 ent->len = len; 5 memcpy(ent->name, name, len); 6 ent->name[len] = 0; ... ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: david lerner <dlernerdroid@gmail.com> Cc: linux-perf-user@vger.kernel.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140917084054.3722.73975.stgit@kbuild-f20.novalocal [ Added missing 'bool user' argument to the !DWARF show_line_range() stub ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-18perf probe: Replace line_list with intlistMasami Hiramatsu1-9/+3
Replace line_list (struct line_node) with intlist for reducing similar codes. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140206053209.29635.81043.stgit@kbuild-fedora.yrl.intra.hitachi.co.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-16perf probe: Release all dynamically allocated parametersMasami Hiramatsu1-0/+6
To fix a memory leak, release all dynamically allocated options/parameters in params data structure. This also introduces/exports some init/clear routines. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140116093947.24403.80118.stgit@kbuild-fedora.novalocal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-26perf probe: Support basic dwarf-based operations on uprobe eventsMasami Hiramatsu1-0/+1
Support basic dwarf(debuginfo) based operations for uprobe events. With this change, perf probe can analyze debuginfo of user application binary to set up new uprobe event. This allows perf-probe --add(with local variables, line numbers) and --line works with -x option. (Actually, --vars has already accepted -x option) For example, the following command shows the probe-able lines of a given user space function. Something that so far was only available in the 'perf probe' tool for kernel space functions: # ./perf probe -x perf --line map__load <map__load@/home/fedora/ksrc/linux-2.6/tools/perf/util/map.c:0> 0 int map__load(struct map *map, symbol_filter_t filter) 1 { 2 const char *name = map->dso->long_name; int nr; 5 if (dso__loaded(map->dso, map->type)) 6 return 0; 8 nr = dso__load(map->dso, map, filter); 9 if (nr < 0) { 10 if (map->dso->has_build_id) { And this shows the available variables at the given line of the function. # ./perf probe -x perf --vars map__load:8 Available variables at map__load:8 @<map__load+96> char* name struct map* map symbol_filter_t filter @<map__find_symbol+112> char* name symbol_filter_t filter @<map__find_symbol_by_name+136> char* name symbol_filter_t filter @<map_groups__find_symbol_by_name+176> char* name struct map* map symbol_filter_t filter And lastly, we can now define probe(s) with all available variables on the given line: # ./perf probe -x perf --add 'map__load:8 $vars' Added new events: probe_perf:map__load (on map__load:8 with $vars) probe_perf:map__load_1 (on map__load:8 with $vars) probe_perf:map__load_2 (on map__load:8 with $vars) probe_perf:map__load_3 (on map__load:8 with $vars) You can now use it in all perf tools, such as: perf record -e probe_perf:map__load_3 -aR sleep 1 Changes from previous version: - Add examples in the patch description. - Use .text section start address and dwarf symbol address for calculating the offset of given symbol, instead of searching the symbol in symtab again. With this change, we can safely handle multiple local function instances (e.g. scnprintf in perf). Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: David A. Long <dave.long@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20131226054152.22364.47021.stgit@kbuild-fedora.novalocal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11perf probe: Provide perf interface for uprobesSrikar Dronamraju1-5/+7
- Enhances perf to probe user space executables and libraries. - Enhances -F/--funcs option of "perf probe" to list possible probe points in an executable file or library. - Documents userspace probing support in perf. [ Probing a function in the executable using function name ] perf probe -x /bin/zsh zfree [ Probing a library function using function name ] perf probe -x /lib64/libc.so.6 malloc [ list probe-able functions in an executable ] perf probe -F -x /bin/zsh [ list probe-able functions in an library] perf probe -F -x /lib/libc.so.6 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Arapov <anton@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120416120909.30661.99781.sendpatchset@srdronam.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-07-16perf probe: Add probed module in front of functionMasami Hiramatsu1-0/+1
Add probed module name and ":" in front of function name if -m module option is given. In the result, the symbol name passed to kprobe-tracer becomes MODULE:FUNCTION, so that kallsyms can solve it as a symbol in the module correctly. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072745.6528.26416.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-28perf probe: Add filters support for available functionsMasami Hiramatsu1-1/+1
Add filters support for available function list. Default filter is "!_*" for filtering out local-purpose symbols. e.g.: # perf probe --filter="add*" -F add_disk add_disk_randomness add_input_randomness add_interrupt_randomness add_memory add_page_to_unevictable_list add_page_wait_queue ... Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Chase Douglas <chase.douglas@canonical.com> Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20110120141545.25915.85930.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-28perf probe: Add variable filter supportMasami Hiramatsu1-1/+2
Add filters support for available variable list. Default filter is "!__k???tab_*&!__crc_*" for filtering out automatically generated symbols. The format of filter rule is "[!]GLOBPATTERN", so you can use wild cards. If the filter rule starts with '!', matched variables are filter out. e.g.: # perf probe -V schedule --externs --filter=cpu* Available variables at schedule @<schedule+0> cpumask_var_t cpu_callout_mask cpumask_var_t cpu_core_map cpumask_var_t cpu_isolated_map cpumask_var_t cpu_sibling_map int cpu_number long unsigned int* cpu_bit_bitmap ... Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Chase Douglas <chase.douglas@canonical.com> Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20110120141539.25915.43401.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> [ committer note: Removed the elf.h include as it was fixed up in e80711c] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-24perf probe: Add --funcs to show available functions in symtabMasami Hiramatsu1-0/+1
Add --funcs to show available functions in symtab. Originally this feature came from Srikar's uprobes patches ( http://lkml.org/lkml/2010/8/27/244 ) e.g. ... __ablkcipher_walk_complete __absent_pages_in_range __account_scheduler_latency __add_pages __alloc_pages_nodemask __alloc_percpu __alloc_reserved_percpu __alloc_skb __alloc_workqueue_key __any_online_cpu __ata_ehi_push_desc ... This also supports symbols in module, e.g. ... cleanup_module cpuid_maxphyaddr emulate_clts emulate_instruction emulate_int_real emulate_invlpg emulator_get_dr emulator_set_dr emulator_task_switch emulator_write_emulated emulator_write_phys fx_init ... Original-patch-from: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20110113124611.22426.10835.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> [ committer note: Add missing elf.h for STB_GLOBAL that broke a RHEL4 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-21perf probe: Add basic module supportMasami Hiramatsu1-3/+7
Add basic module probe support on perf probe. This introduces "--module <MODNAME>" option to perf probe for putting probes and showing lines and variables in the given module. Currently, this supports only probing on running modules. Supporting off-line module probing is the next step. e.g.) [show lines] # ./perf probe --module drm -L drm_vblank_info <drm_vblank_info:0> 0 int drm_vblank_info(struct seq_file *m, void *data) 1 { struct drm_info_node *node = (struct drm_info_node *) m->private 3 struct drm_device *dev = node->minor->dev; ... [show vars] # ./perf probe --module drm -V drm_vblank_info:3 Available variables at drm_vblank_info:3 @<drm_vblank_info+20> (unknown_type) data struct drm_info_node* node struct seq_file* m [put a probe] # ./perf probe --module drm drm_vblank_info:3 node m Add new event: probe:drm_vblank_info (on drm_vblank_info:3 with node m) You can now use it on all perf tools, such as: perf record -e probe:drm_vblank_info -aR sleep 1 [list probes] # ./perf probe -l probe:drm_vblank_info (on drm_vblank_info:3@drivers/gpu/drm/drm_info.c with ... Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20101021101341.3542.71638.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-21perf probe: Show accessible global variablesMasami Hiramatsu1-1/+1
Add --externs for allowing --vars to show accessible global (externally defined) variables from a given probe point too. This will give you a hint which globals can be accessible from the probe point. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20101021101335.3542.31003.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-21perf probe: Function style fixMasami Hiramatsu1-1/+1
Just change the order of function arguments for ease of read; moving optional bool flag to the last. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20101021101329.3542.51200.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-21perf probe: Show accessible local variablesMasami Hiramatsu1-0/+8
Add -V (--vars) option for listing accessible local variables at given probe point. This will help finding which local variables are available for event arguments. e.g.) # perf probe -V call_timer_fn:23 Available variables at call_timer_fn:23 @<run_timer_softirq+345> function_type* fn int preempt_count long unsigned int data struct list_head work_list struct list_head* head struct timer_list* timer struct tvec_base* base Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20101021101323.3542.40282.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-07-30perf probe: Rename common fields/functions from kprobe to probe.Srikar Dronamraju1-17/+10
As a precursor for perf to support uprobes, rename fields/functions that had kprobe in their name but can be shared across perf-kprobes and perf-uprobes to probe. Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Wielaard <mjw@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Naren A Devaiah <naren.devaiah@in.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100729141351.GG21723@linux.vnet.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-07-16perf probe: Support comp_dir to find an absolute source pathMasami Hiramatsu1-0/+1
Gcc generates DW_AT_comp_dir and stores relative source path if building kernel without O= option. In that case, perf probe --line sometimes doesn't work without --source option, because it tries to access relative source path. This adds DW_AT_comp_dir support to perf probe for finding an absolute source path when no --source option. LKML-Reference: <4C36EBE7.3060802@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-07-06perf probe: Support tracing an entry of arrayMasami Hiramatsu1-0/+1
Add array-entry tracing support to perf probe. This enables to trace an entry of array which is indexed by constant value, e.g. array[0]. For example: $ perf probe -a 'bio_split bi->bi_io_vec[0]' Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100519195742.2885.5344.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-26perf probe: Add --max-probes optionMasami Hiramatsu1-2/+2
Add --max-probes option to change the maximum limit of findable probe points per event, since inlined function can be expanded into thousands of probe points. Default value is 128. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100421195640.24664.62984.stgit@localhost6.localdomain6> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-15perf probe: Fix a bug that --line range can be overflowMasami Hiramatsu1-3/+3
Since line_finder.lno_s/e are signed int but line_range.start/end are unsigned int, it is possible to be overflow when converting line_range->start/end to line_finder->lno_s/e. This changes line_range.start/end and line_list.line to signed int and adds overflow checks when setting line_finder.lno_s/e. LKML-Reference: <20100414223942.14630.72730.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-15perf probe: Remove die() from probe-event codeMasami Hiramatsu1-12/+12
Remove die() and DIE_IF() code from util/probe-event.c since these 'sudden death' in utility functions make reusing it from other code (especially tui/gui) difficult. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100412171742.3790.33650.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-15perf probe: Support basic type castingMasami Hiramatsu1-0/+1
Add basic type casting for arguments to perf probe. This allows users to specify the actual type of arguments. Of course, if user sets invalid types, kprobe-tracer rejects that. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100412171722.3790.50372.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-15perf probe: Query basic types from debuginfoMasami Hiramatsu1-0/+1
Query the basic type information (byte-size and signed-flag) from debuginfo and pass that to kprobe-tracer. This is especially useful for tracing the members of data structure, because each member has different byte-size on the memory. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100412171715.3790.23730.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-15perf probe: Support argument nameMasami Hiramatsu1-0/+1
Set given names to event arguments. The syntax is same as kprobe-tracer, you can add 'NAME=' right before each argument. e.g. ./perf probe vfs_read foo=file then, 'foo' is set to the argument name as below. ./perf probe -l probe:vfs_read (on vfs_read@linux-2.6-tip/fs/read_write.c with foo) Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100412171653.3790.74624.stgit@localhost6.localdomain6> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-08perf tools: Reorganize some structs to save spaceArnaldo Carvalho de Melo1-1/+1
Using 'pahole --packable' I found some structs that could be reorganized to eliminate alignment holes, in some cases getting them to be cacheline multiples. [acme@doppio linux-2.6-tip]$ codiff perf.old ~/bin/perf builtin-annotate.c: struct perf_session | -8 struct perf_header | -8 2 structs changed builtin-diff.c: struct sample_data | -8 1 struct changed diff__process_sample_event | -8 1 function changed, 8 bytes removed, diff: -8 builtin-sched.c: struct sched_atom | -8 1 struct changed builtin-timechart.c: struct per_pid | -8 1 struct changed cmd_timechart | -16 1 function changed, 16 bytes removed, diff: -16 builtin-probe.c: struct perf_probe_point | -8 struct perf_probe_event | -8 2 structs changed opt_add_probe_event | -3 1 function changed, 3 bytes removed, diff: -3 util/probe-finder.c: struct probe_finder | -8 1 struct changed find_kprobe_trace_events | -16 1 function changed, 16 bytes removed, diff: -16 /home/acme/bin/perf: 4 functions changed, 43 bytes removed, diff: -43 [acme@doppio linux-2.6-tip]$ Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-03-17perf probe: Add data structure member access supportMasami Hiramatsu1-1/+11
Support accessing members in the data structures. With this, perf-probe accepts data-structure members(IOW, it now accepts dot '.' and arrow '->' operators) as probe arguemnts. e.g. ./perf probe --add 'schedule:44 rq->curr' ./perf probe --add 'vfs_read file->f_op->read file->f_path.dentry' Note that '>' can be interpreted as redirection in command-line. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100316220626.32050.57552.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-17perf probe: Introduce kprobe_trace_event and perf_probe_eventMasami Hiramatsu1-11/+100
Introduce kprobe_trace_event and perf_probe_event and replace old probe_point structure with it. probe_point structure is not enough flexible nor extensible. New data structures will help implementing further features. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100316220612.32050.33806.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-17perf probe: Add --dry-run optionMasami Hiramatsu1-0/+2
Add --dry-run option for debugging and testing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100316220605.32050.6571.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-17perf probe: Move add-probe routine to util/Masami Hiramatsu1-1/+1
Move add-probe routine to util/probe_event.c. This simplifies main routine for reducing maintenance cost. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100316220537.32050.72214.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13perf probe: Support --line option to show probable source-code linesMasami Hiramatsu1-0/+2
Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15perf probe: Fix to show which probe point is not foundMasami Hiramatsu1-0/+1
Fix perf probe to show which probe point is not found. With out this patch, it shows just "No probe point found." This doesn't help users if they specify several probes. e.g. # perf probe -f --add schedule --add test Fatal: No probe point found. This patch makes error message more helpful as below. # perf probe --add schedule --add test Fatal: Probe point 'test' not found. - probe not added. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091215153247.17436.49068.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15perf probe: Reject second attempt of adding same-name eventMasami Hiramatsu1-1/+2
Reject second attempt of adding same-name event. This patch also provides --force option which allows user to add additional probe events on the same-name event. e.g. (the first attempt : success) ./perf probe schedule Added new event: probe:schedule (on schedule+0) (the second attempt : failure) ./perf probe schedule:11 Error: event "schedule" already exists. (Use -f to force duplicates.) Fatal: Can't add new event. (the second attempt with -f : successfully added) ./perf probe -f schedule:11 Added new event: probe:schedule_1 (on schedule+45) Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091215153225.17436.15166.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15perf probe: Support event name for --add optionMasami Hiramatsu1-2/+1
Support event name syntax for --add option. This allows users to specify event name for each new event. The --add syntax is: perf probe --add '[EVENT=]SRC:LINE ARGS' or perf probe --add '[EVENT=]FUNC[+OFFS|%return|:RLN][@SRC] ARGS' e.g. ./perf probe --add myprobe1=schedule Note: currently group name is not supported yet, because it can cause name-space confliction with other tracepoint/ hw-breakpoint events. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091215153218.17436.84675.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15perf probe: Cleanup struct session in builtin-probe.cMasami Hiramatsu1-1/+3
Clean up struct session in builtin-probe.c, including change need_dwarf to bool and move listing flag into struct session as list_events flag. This also changes parse_perf_probe_event() interface due to code readability. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091215153114.17436.77000.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09perf probe: Support --del optionMasami Hiramatsu1-0/+1
Support perf probe --del <event> option. Currently, perf probe can have only one event for each --del option. If you'd like to delete several probe events, you need to specify --del for each events. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> LKML-Reference: <20091208220323.10142.62079.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01perf probe: Simplify event namingMasami Hiramatsu1-0/+3
Simplify event naming as <symbol>_<seqnum>. Each event name is globally unique (group name is not checked). So, if there is schedule_0, next probe event on schedule() will be schedule_1. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091201002024.10235.2353.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01perf probe: Add --list option for listing current probe eventsMasami Hiramatsu1-0/+5
Add --list option for listing currently defined probe events in the kernel. This shows events in below format; [group:event] <perf-probe probe-definition> for example: [probe:schedule_0] schedule+30 cpu Note that source file/line information is not supported yet. So even if you added a probe by line, it will be shown in <symbol+offset>. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091201002017.10235.76575.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-01perf probe: Move probe event utility functions to probe-event.cMasami Hiramatsu1-0/+10
Split probe event (kprobe-events and perf probe events) utility functions from builtin-probe.c to probe-event.c. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091201001958.10235.90243.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 02:39:02 +0300