summaryrefslogtreecommitdiff
path: root/tools/perf/builtin-kmem.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-26perf tools: Enhance the matching of sub-commands abbreviationsWei Li1-1/+1
We support short command 'rec*' for 'record' and 'rep*' for 'report' in lots of sub-commands, but the matching is not quite strict currnetly. It may be puzzling sometime, like we mis-type a 'recport' to report but it will perform 'record' in fact without any message. To fix this, add a check to ensure that the short cmd is valid prefix of the real command. Committer testing: [root@quaco ~]# perf c2c re sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c rec sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ] # perf c2c recport sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ] # perf c2c records sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rui Xiang <rui.xiang@huawei.com> Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-12perf cpumap: Give CPUs their own typeIan Rogers1-1/+1
A common problem is confusing CPU map indices with the CPU, by wrapping the CPU with a struct then this is avoided. This approach is similar to atomic_t. Committer notes: To make it build with BUILD_BPF_SKEL=1 these files needed the conversions to 'struct perf_cpu' usage: tools/perf/util/bpf_counter.c tools/perf/util/bpf_counter_cgroup.c tools/perf/util/bpf_ftrace.c Also perf_env__get_cpu() was removed back in "perf cpumap: Switch cpu_map__build_map to cpu function". Additionally these needed to be fixed for the ARM builds to complete: tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/pmu.c Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-02perf tools: Remove repipe argument from perf_session__new()Namhyung Kim1-1/+1
The repipe argument is only used by perf inject and the all others passes 'false'. Let's remove it from the function signature and add __perf_session__new() to be called from perf inject directly. This is a preparation of the change the pipe input/output. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org [ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' 'find' methodsArnaldo Carvalho de Melo1-5/+2
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-10perf kmem: Pass additional arguments to 'perf record'Ian Rogers1-1/+2
'perf kmem' has an input file option but current an output file option fails: $ sudo perf kmem record -o /tmp/p.data sleep 1    Error: unknown switch `o' Usage: perf kmem [<options>] {record|stat}    -f, --force           don't complain, do it    -i, --input <file>    input file name    -l, --line <num>      show n lines    -s, --sort <key[,key2...]>                          sort by keys: ptr, callsite, bytes, hit, pingpong, frag, page, order, mig>    -v, --verbose         be more verbose (show symbol address, etc)        --alloc           show per-allocation statistics        --caller          show per-callsite statistics        --live            Show live page stat        --page            Analyze page allocator        --raw-ip          show raw ip instead of symbol        --slab            Analyze slab allocator        --time <str>      Time span of interest (start,stop) 'perf sched' is similar in implementation and avoids the problem by passing additional arguments to 'perf record'. This change makes 'perf kmem' parse command line options consistently with 'perf sched', although neither actually list that -o is a supported option. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200708183919.4141023-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05perf kmem: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()Arnaldo Carvalho de Melo1-19/+14
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05perf evsel: Rename perf_evsel__{str,int}val() and other tracepoint field ↵Arnaldo Carvalho de Melo1-15/+15
metehods to to evsel__*() As those are not 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05perf evsel: Rename *perf_evsel__*name() to *evsel__*name()Arnaldo Carvalho de Melo1-1/+1
As they are 'struct evsel' methods or related routines, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-12perf callchain: Use 'struct map_symbol' in 'struct callchain_cursor_node'Arnaldo Carvalho de Melo1-2/+2
To ease passing around map+symbol, just like done for other parts of the tree recently. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-16perf kmem: Fix memory leak in compact_gfp_flags()Yunfeng Ye1-0/+1
The memory @orig_flags is allocated by strdup(), it is freed on the normal path, but leak to free on the error path. Fix this by adding free(orig_flags) on the error path. Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string") Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20perf session: Return error code for perf_session__new() function on failureMamatha Inamdar1-2/+3
This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-01perf dsos: Move the dsos struct and its methods to separate source filesArnaldo Carvalho de Melo1-0/+1
So that we can reduce the header dependency tree further, in the process noticed that lots of places were getting even things like build-id routines and 'struct perf_tool' definition indirectly, so fix all those too. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-01libtraceevent, perf tools: Changes in tep_print_event_* APIsTzvetomir Stoyanov1-1/+2
Libtraceevent APIs for printing various trace events information are complicated, there are complex extra parameters. To control the way event information is printed, the user should call a set of functions in a specific sequence. These APIs are reimplemented to provide a more simple interface for printing event information. Removed APIs: tep_print_event_task() tep_print_event_time() tep_print_event_data() tep_event_info() tep_is_latency_format() tep_set_latency_format() tep_data_latency_format() tep_set_print_raw() A new API for printing event information is introduced: void tep_print_event(struct tep_handle *tep, struct trace_seq *s, struct tep_record *record, const char *fmt, ...); where "fmt" is a printf-like format string, followed by the event fields to be printed. Supported fields: TEP_PRINT_PID, "%d" - event PID TEP_PRINT_CPU, "%d" - event CPU TEP_PRINT_COMM, "%s" - event command string TEP_PRINT_NAME, "%s" - event name TEP_PRINT_LATENCY, "%s" - event latency TEP_PRINT_TIME, %d - event time stamp. A divisor and precision can be specified as part of this format string: "%precision.divisord". Example: "%3.1000d" - divide the time by 1000 and print the first 3 digits before the dot. Thus, the time stamp "123456000" will be printed as "123.456" TEP_PRINT_INFO, "%s" - event information. TEP_PRINT_INFO_RAW, "%s" - event information, in raw format. Example: tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s", TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU, TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO); Output: ls-11314 [005] d.h. 185207.366383 function __wake_up Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: Patrick McLean <chutzpah@gentoo.org> Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-01perf debug: Remove needless include directives from debug.hArnaldo Carvalho de Melo1-0/+1
All we need there is a forward declaration for 'union perf_event', so remove it from there and add missing header directives in places using things from this indirect include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-30perf evsel: Rename struct perf_evsel to struct evselJiri Olsa1-12/+12
Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-09tools lib: Adopt zalloc()/zfree() from tools/perfArnaldo Carvalho de Melo1-1/+1
Eroding a bit more the tools/perf/util/util.h hodpodge header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26tools perf: Move from sane_ctype.h obtained from git to the Linux's originalArnaldo Carvalho de Melo1-1/+1
We got the sane_ctype.h headers from git and kept using it so far, but since that code originally came from the kernel sources to the git sources, perhaps its better to just use the one in the kernel, so that we can leverage tools/perf/check_headers.sh to be notified when our copy gets out of sync, i.e. when fixes or goodies are added to the code we've copied. This will help with things like tools/lib/string.c where we want to have more things in common with the kernel, such as strim(), skip_spaces(), etc so as to go on removing the things that we have in tools/perf/util/ and instead using the code in the kernel, indirectly and removing things like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements are made to the original code. Hopefully this also should help with reducing the difference of code hosted in tools/ to the one in the kernel proper. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25perf string: Move 'dots' and 'graph_dotted_line' out of sane_ctype.hArnaldo Carvalho de Melo1-0/+1
Those are not in that file in the git repo, lets move it from there so that we get that sane ctype code fully isolated to allow getting it in sync either with the git sources or better with the kernel sources (include/linux/ctype.h + lib/ctype.h), that way we can use check_headers.h to get notified when changes are made in the original code so that we can cherry-pick. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ioh5sghn3943j0rxg6lb2dgs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-01perf tools, tools lib traceevent: Rename "pevent" member of struct tep_event ↵Tzvetomir Stoyanov1-1/+1
to "tep" The member "pevent" of the struct tep_event is renamed to "tep". This makes the struct consistent with the chosen naming convention: tep (trace event parser), instead of the old pevent. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-3-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.627724996@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-22perf data: Add global path holderJiri Olsa1-1/+1
Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06pref tools: Add missing map.h includesArnaldo Carvalho de Melo1-0/+1
Lots of places get the map.h file indirectly, and since we're going to remove it from machine.h, then those need to include it directly, do it now, before we remove that dep. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-21perf tools: Replace automatic const char[] variables by staticsRasmus Villemoes1-2/+2
An automatic const char[] variable gets initialized at runtime, just like any other automatic variable. For long strings, that uses a lot of stack and wastes time building the string; e.g. for the "No %s allocation events..." case one has: 444516: 48 b8 4e 6f 20 25 73 20 61 6c movabs $0x6c61207325206f4e,%rax # "No %s al" ... 444674: 48 89 45 80 mov %rax,-0x80(%rbp) 444678: 48 b8 6c 6f 63 61 74 69 6f 6e movabs $0x6e6f697461636f6c,%rax # "location" 444682: 48 89 45 88 mov %rax,-0x78(%rbp) 444686: 48 b8 20 65 76 65 6e 74 73 20 movabs $0x2073746e65766520,%rax # " events " 444690: 66 44 89 55 c4 mov %r10w,-0x3c(%rbp) 444695: 48 89 45 90 mov %rax,-0x70(%rbp) 444699: 48 b8 66 6f 75 6e 64 2e 20 20 movabs $0x20202e646e756f66,%rax Make them all static so that the compiler just references objects in .rodata. Committer testing: Ok, using dwarves's codiff tool: $ codiff --functions /tmp/perf.before ~/bin/perf builtin-sched.c: cmd_sched | -48 1 function changed, 48 bytes removed, diff: -48 builtin-report.c: cmd_report | -32 1 function changed, 32 bytes removed, diff: -32 builtin-kmem.c: cmd_kmem | -64 build_alloc_func_list | -50 2 functions changed, 114 bytes removed, diff: -114 builtin-c2c.c: perf_c2c__report | -390 1 function changed, 390 bytes removed, diff: -390 ui/browsers/header.c: tui__header_window | -104 1 function changed, 104 bytes removed, diff: -104 /home/acme/bin/perf: 9 functions changed, 688 bytes removed, diff: -688 Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181102230624.20064-1-linux@rasmusvillemoes.dk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename 'enum pevent_flag' to 'enum tep_flag'Tzvetomir Stoyanov (VMware)1-1/+1
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes pevent_get_page_size API and enum pevent_flag to enum tep_flag Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180701.623942406@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename pevent alloc / free APIsTzvetomir Stoyanov (VMware)1-1/+1
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename 'struct pevent_record' to 'struct ↵Tzvetomir Stoyanov (VMware)1-1/+1
tep_record' In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes the 'struct pevent_record' to 'struct tep_record'. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-30perf machine: Ditch find_kernel_function variantsArnaldo Carvalho de Melo1-3/+3
Since we do not have split symtabs anymore, no need to have explicit find_kernel_function variants, use the find_kernel_symbol ones. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-hiw2ryflju000f6wl62128it@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-16mm: remove __GFP_COLDMel Gorman1-1/+0
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16kmemcheck: remove whats left of NOTRACK flagsLevin, Alexander (Sasha Levin)1-1/+0
Now that kmemcheck is gone, we don't need the NOTRACK flags. Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-07Merge branch 'linus' into perf/core, to fix conflictsIngo Molnar1-0/+1
Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30perf tools: Add struct perf_data_fileJiri Olsa1-1/+1
Add struct perf_data_file to represent a single file within a perf_data struct. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org [ Fixup recent changes in 'perf script --per-event-dump' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-30perf tools: Rename struct perf_data_file to perf_dataJiri Olsa1-4/+4
Rename struct perf_data_file to perf_data, because we will add the possibility to have multiple files under perf.data, so the 'perf_data' name fits better. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org [ Fixup recent changes in 'perf script --per-event-dump' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-23perf kmem: Perform some cleanup if '--time' is given an invalid valueChristophe JAILLET1-1/+2
If the string passed in '--time' is invalid, we must do some cleanup before leaving. As in the other error handling paths of this function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Fixes: 2a865bd8dddd ("perf kmem: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20170916060936.28199-1-christophe.jaillet@wanadoo.fr Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-14mm: treewide: remove GFP_TEMPORARY allocation flagMichal Hocko1-1/+0
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful ↵Michal Hocko1-1/+1
semantic __GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to the page allocator. This has been true but only for allocations requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always ignored for smaller sizes. This is a bit unfortunate because there is no way to express the same semantic for those requests and they are considered too important to fail so they might end up looping in the page allocator for ever, similarly to GFP_NOFAIL requests. Now that the whole tree has been cleaned up and accidental or misled usage of __GFP_REPEAT flag has been removed for !costly requests we can give the original flag a better name and more importantly a more useful semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user that the allocator would try really hard but there is no promise of a success. This will work independent of the order and overrides the default allocator behavior. Page allocator users have several levels of guarantee vs. cost options (take GFP_KERNEL as an example) - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_ attempt to free memory at all. The most light weight mode which even doesn't kick the background reclaim. Should be used carefully because it might deplete the memory and the next user might hit the more aggressive reclaim - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic allocation without any attempt to free memory from the current context but can wake kswapd to reclaim memory if the zone is below the low watermark. Can be used from either atomic contexts or when the request is a performance optimization and there is another fallback for a slow path. - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) - non sleeping allocation with an expensive fallback so it can access some portion of memory reserves. Usually used from interrupt/bh context with an expensive slow path fallback. - GFP_KERNEL - both background and direct reclaim are allowed and the _default_ page allocator behavior is used. That means that !costly allocation requests are basically nofail but there is no guarantee of that behavior so failures have to be checked properly by callers (e.g. OOM killer victim is allowed to fail currently). - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior and all allocation requests fail early rather than cause disruptive reclaim (one round of reclaim in this implementation). The OOM killer is not invoked. - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator behavior and all allocation requests try really hard. The request will fail if the reclaim cannot make any progress. The OOM killer won't be triggered. - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior and all allocation requests will loop endlessly until they succeed. This might be really dangerous especially for larger orders. Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL because they already had their semantic. No new users are added. __alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if there is no progress and we have already passed the OOM point. This means that all the reclaim opportunities have been exhausted except the most disruptive one (the OOM killer) and a user defined fallback behavior is more sensible than keep retrying in the page allocator. [akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c] [mhocko@suse.com: semantic fix] Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz [mhocko@kernel.org: address other thing spotted by Vlastimil] Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Belits <alex.belits@cavium.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David Daney <david.daney@cavium.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27perf tools: Replace error() with pr_err()Arnaldo Carvalho de Melo1-2/+2
To consolidate the error reporting facility. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Include errno.h where neededArnaldo Carvalho de Melo1-0/+1
Removing it from util.h, part of an effort to disentangle the includes hell, that makes changes to util.h or something included by it to cause a complete rebuild of the tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Move sane ctype stuff from util.h to sane_ctype.hArnaldo Carvalho de Melo1-0/+2
More stuff that came from git, out of the hodge-podge that is util.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Including missing inttypes.h headerArnaldo Carvalho de Melo1-0/+1
Needed to use the PRI[xu](32,64) formatting macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is usedArnaldo Carvalho de Melo1-0/+1
To pave the way for further cleanups where linux/kernel.h may stop being included in some header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27perf tools: Remove unused 'prefix' from builtin functionsArnaldo Carvalho de Melo1-2/+2
We got it from the git sources but never used it for anything, with the place where this would be somehow used remaining: static int run_builtin(struct cmd_struct *p, int argc, const char **argv) { prefix = NULL; if (p->option & RUN_SETUP) prefix = NULL; /* setup_perf_directory(); */ Ditch it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related infoHari Bathini1-0/+1
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-13perf symbols: No need to check if sym->name is NULLArnaldo Carvalho de Melo1-2/+2
As it is an array, so will always evaluate to 'true', as reported by clang: builtin-sched.c:2070:19: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] if (sym && sym->name) { ~~ ~~~~~^~~~ 1 warning generated. So just ditch all those useless checks. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ydpm927col06paixb775jjx5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-27perf tools: Propagate perf_config() errorsArnaldo Carvalho de Melo1-2/+6
Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11mm: get rid of __GFP_OTHER_NODEMichal Hocko1-1/+0
The flag was introduced by commit 78afd5612deb ("mm: add __GFP_OTHER_NODE flag") to allow proper accounting of remote node allocations done by kernel daemons on behalf of a process - e.g. khugepaged. After "mm: fix remote numa hits statistics" we do not need and actually use the flag so we can safely remove it because all allocations which are satisfied from their "home" node are accounted properly. [mhocko@suse.com: fix build] Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01perf kmem: Add option to specify time window of interestDavid Ahern1-0/+24
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf kmem record usleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ] # perf evlist kmem:kmalloc kmem:kmalloc_node kmem:kfree kmem:kmem_cache_alloc kmem:kmem_cache_alloc_node kmem:kmem_cache_free # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # # # Use 'perf script' to get a first approach, select a chunk for then using # # with 'perf kmem stat --time' # # perf script | tail -15 usleep 9889 [0] 20119.782088: kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0 perf 9888 [3] 20119.782088: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782090: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK perf 9888 [3] 20119.782091: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782093: kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0 perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782098: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782101: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782103: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 # # # stats for the whole perf.data file, i.e. no interval specified # # perf kmem stat SUMMARY (SLAB allocator) ======================== Total bytes requested: 172,628 Total bytes allocated: 173,088 Total bytes freed: 161,280 Net total bytes allocated: 11,808 Total bytes wasted on internal fragmentation: 460 Internal fragmentation: 0.265761% Cross CPU allocations: 0/851 # # # stats for an end open interval, after a certain time: # # perf kmem stat --time 20119.782088, SUMMARY (SLAB allocator) ======================== Total bytes requested: 552 Total bytes allocated: 552 Total bytes freed: 448 Net total bytes allocated: 104 Total bytes wasted on internal fragmentation: 0 Internal fragmentation: 0.000000% Cross CPU allocations: 0/8 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29perf kmem stat: Track memory freedDavid Ahern1-1/+11
Track freed memory as well as allocations and show the net in the summary. Committer notes: Testing it: # perf kmem record usleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (4208 samples) ] [root@jouet ~]# perf kmem stat --slab SUMMARY (SLAB allocator) ======================== Total bytes requested: 234,011 Total bytes allocated: 234,504 Total bytes freed: 213,328 <------ Net total bytes allocated: 21,176 Total bytes wasted on internal fragmentation: 493 Internal fragmentation: 0.210231% Cross CPU allocations: 4/1,963 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480110133-37039-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-05perf symbols: Remove symbol_filter_t machineryArnaldo Carvalho de Melo1-6/+4
We're not using it anymore, few users were, but we really could do without it, simplify lots of functions by removing it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-29mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocationsVlastimil Babka1-0/+1
After the previous patch, we can distinguish costly allocations that should be really lightweight, such as THP page faults, with __GFP_NORETRY. This means we don't need to recognize khugepaged allocations via PF_KTHREAD anymore. We can also change THP page faults in areas where madvise(MADV_HUGEPAGE) was used to try as hard as khugepaged, as the process has indicated that it benefits from THP's and is willing to pay some initial latency costs. We can also make the flags handling less cryptic by distinguishing GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from GFP_TRANSHUGE (only direct reclaim, khugepaged default). Adding __GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed. The patch effectively changes the current GFP_TRANSHUGE users as follows: * get_huge_zero_page() - the zero page lifetime should be relatively long and it's shared by multiple users, so it's worth spending some effort on it. We use GFP_TRANSHUGE, and __GFP_NORETRY is not added. This also restores direct reclaim to this allocation, which was unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag by default to madvise and add a stall-free defrag option") * alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency is not an issue. So if khugepaged "defrag" is enabled (the default), do reclaim via GFP_TRANSHUGE without __GFP_NORETRY. We can remove the PF_KTHREAD check from page alloc. As a side-effect, khugepaged will now no longer check if the initial compaction was deferred or contended. This is OK, as khugepaged sleep times between collapsion attempts are long enough to prevent noticeable disruption, so we should allow it to spend some effort. * migrate_misplaced_transhuge_page() - already was masking out __GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is equivalent. * alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise) are now allocating without __GFP_NORETRY. Other vma's keep using __GFP_NORETRY if direct reclaim/compaction is at all allowed (by default it's allowed only for madvised vma's). The rest is conversion to GFP_TRANSHUGE(_LIGHT). [mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT] Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-23perf evlist: Rename for_each() macros to for_each_entry()Arnaldo Carvalho de Melo1-1/+1
To match the semantics for list.h in the kernel, that are used to implement those macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 13:32:34 +0300