summaryrefslogtreecommitdiff
path: root/tools/perf/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16perf record: Fix module size on s390Thomas Richter1-1/+13
commit 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea upstream. On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16perf annotate: Fix s390 gap between kernel end and module startThomas Richter1-0/+17
commit b9c0a64901d5bdec6eafd38d1dc8fa0e2974fccb upstream. During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26perf cs-etm: Properly set the value of 'old' and 'head' in snapshot modeMathieu Poirier1-4/+123
[ Upstream commit e45c48a9a4d20ebc7b639a62c3ef8f4b08007027 ] This patch adds the necessary intelligence to properly compute the value of 'old' and 'head' when operating in snapshot mode. That way we can get the latest information in the AUX buffer and be compatible with the generic AUX ring buffer mechanic. Tester notes: > Leo, have you had the chance to test/review this one? Suzuki? Sure. I applied this patch on the perf/core branch (with latest commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading filename to the loop') and passed testing with below steps: # perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort & [1] 19097 Bubble sorting array of 30000 elements # kill -USR2 19097 # kill -USR2 19097 # kill -USR2 19097 [ perf record: Woken up 4 times to write data ] [ perf record: Captured and wrote 0.753 MB perf.data ] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22perf record: Fix s390 missing module symbol and warning for non-root usersThomas Richter1-3/+6
[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ] Command 'perf record' and 'perf report' on a system without kernel debuginfo packages uses /proc/kallsyms and /proc/modules to find addresses for kernel and module symbols. On x86 this works for root and non-root users. On s390, when invoked as non-root user, many of the following warnings are shown and module symbols are missing: proc/{kallsyms,modules} inconsistency while looking for "[sha1_s390]" module! Command 'perf record' creates a list of module start addresses by parsing the output of /proc/modules and creates a PERF_RECORD_MMAP record for the kernel and each module. The following function call sequence is executed: machine__create_kernel_maps machine__create_module modules__parse machine__create_module --> for each line in /proc/modules arch__fix_module_text_start Function arch__fix_module_text_start() is s390 specific. It opens file /sys/module/<name>/sections/.text to extract the module's .text section start address. On s390 the module loader prepends a header before the first section, whereas on x86 the module's text section address is identical the the module's load address. However module section files are root readable only. For non-root the read operation fails and machine__create_module() returns an error. Command perf record does not generate any PERF_RECORD_MMAP record for loaded modules. Later command perf report complains about missing module maps. To fix this function arch__fix_module_text_start() always returns success. For root users there is no change, for non-root users the module's load address is used as module's text start address (the prepended header then counts as part of the text section). This enable non-root users to use module symbols and avoid the warning when perf report is executed. Output before: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text Output after: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text 0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz 0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz 0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12perf tools: Add Hygon Dhyana supportPu Wen1-1/+1
[ Upstream commit 4787eff3fa88f62fede6ed7afa06477ae6bf984d ] The tool perf is useful for the performance analysis on the Hygon Dhyana platform. But right now there is no Hygon support for it to analyze the KVM guest os data. So add Hygon Dhyana support to it by checking vendor string to share the code path of AMD. Signed-off-by: Pu Wen <puwen@hygon.cn> Acked-by: Borislav Petkov <bp@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26perf intel-pt: Fix error with config term "pt=0"Adrian Hunter1-0/+11
[ Upstream commit 1c6f709b9f96366cc47af23c05ecec9b8c0c392d ] Users should never use 'pt=0', but if they do it may give a meaningless error: $ perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). Fix that by forcing 'pt=1'. Committer testing: # perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). /bin/dmesg | grep -i perf may provide additional information. # perf record -e intel_pt/pt=0/u uname pt=0 doesn't make sense, forcing pt=1 Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data ] # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09perf machine: Record if a arch has a single user/kernel address spaceAdrian Hunter2-0/+11
commit ec1891afae740be581ecf5abc8bda74c4549203f upstream. Some architectures have a single address space for kernel and user addresses, which makes it possible to determine if an address is in kernel space or user space. Some don't, e.g.: sparc. Cache that info in perf_env so that, for instance, code needing to fallback failed symbol lookups at the kernel space in single address space arches can lookup at userspace. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-30perf probe powerpc: Ignore SyS symbols irrespective of endiannessSandipan Das1-1/+3
This makes sure that the SyS symbols are ignored for any powerpc system, not just the big endian ones. Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Fixes: fb6d59423115 ("perf probe ppc: Use the right prefix when ignoring SyS symbols on ppc") Link: http://lkml.kernel.org/r/20180828090848.1914-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-30perf arm64: Fix include path for asm-generic/unistd.hKim Phillips2-5/+6
The new syscall table support for arm64 mistakenly used the system's asm-generic/unistd.h file when processing the tools/arch/arm64/include/uapi/asm/unistd.h file's include directive: #include <asm-generic/unistd.h> See "Committer notes" section of commit 2b5882435606 "perf arm64: Generate system call table from asm/unistd.h" for more details. This patch removes the committer's temporary workaround, and instructs the host compiler to search the build tree's include path for the right copy of the unistd.h file, instead of the one on the system's /usr/include path. It thus fixes the committer's test that cross-builds an arm64 perf on an x86 platform running Ubuntu 14.04.5 LTS with an old toolchain: $ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc `pwd`/tools tools/arch/arm64/include/uapi/asm/unistd.h | grep bpf [280] = "bpf", Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 2b5882435606 ("perf arm64: Generate system call table from asm/unistd.h") Link: http://lkml.kernel.org/r/20180806172800.bbcec3cfcc51e2facc978bf2@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-30perf tests: Add breakpoint modify testsJiri Olsa4-0/+221
Adding to tests that aims on kernel breakpoint modification bugs. First test creates HW breakpoint, tries to change it and checks it was properly changed. It aims on kernel issue that prevents HW breakpoint to be changed via ptrace interface. The first test forks, the child sets itself as ptrace tracee and waits in signal for parent to trace it, then it calls bp_1 and quits. The parent does following steps: - creates a new breakpoint (id 0) for bp_2 function - changes that breakpoint to bp_1 function - waits for the breakpoint to hit and checks it has proper rip of bp_1 function This test aims on an issue in kernel preventing to change disabled breakpoints Second test mimics the first one except for few steps in the parent: - creates a new breakpoint (id 0) for bp_1 function - changes that breakpoint to bogus (-1) address - waits for the breakpoint to hit and checks it has proper rip of bp_1 function This test aims on an issue in kernel disabling enabled breakpoint after unsuccesful change. Committer testing: # uname -a Linux jouet 4.18.0-rc8-00002-g1236568ee3cb #12 SMP Tue Aug 7 14:08:26 -03 2018 x86_64 x86_64 x86_64 GNU/Linux # perf test -v "bp modify" 62: x86 bp modify : --- start --- test child forked, pid 25671 in bp_1 tracee exited prematurely 2 FAILED arch/x86/tests/bp-modify.c:209 modify test 1 failed test child finished with -1 ---- end ---- x86 bp modify: FAILED! # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180827091228.2878-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14perf arm spe: Fix uninitialized record error variableKim Phillips1-0/+1
The auxtrace init variable 'err' was not being initialized, leading perf to abort early in an SPE record command when there was no explicit error, rather only based whatever memory contents were on the stack. Initialize it explicitly on getting an SPE successfully, the same way cs-etm does. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dongjiu Geng <gengdongjiu@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") Link: http://lkml.kernel.org/r/20180810174512.52900813e57cbccf18ce99a2@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-14perf tools: Move syscall_64.tbl check into check-headers.shJiri Olsa1-3/+0
Probably leftover from the time we introducd the check-headers.sh script. Committer testing: Remove the 'rseq' syscall from tools/perf/arch/x86/entry/syscalls/syscall_64.tbl to fake a diff: make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl CC /tmp/build/perf/util/syscalltbl.o INSTALL trace_plugins <SNIP> $ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl --- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2018-08-13 15:49:50.896585176 -0300 +++ arch/x86/entry/syscalls/syscall_64.tbl 2018-07-20 12:04:04.536858304 -0300 @@ -342,6 +342,7 @@ 331 common pkey_free __x64_sys_pkey_free 332 common statx __x64_sys_statx 333 common io_pgetevents __x64_sys_io_pgetevents +334 common rseq __x64_sys_rseq # # x32-specific system call numbers start at 512 to avoid cache impact $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180813111504.3568-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-09perf probe powerpc: Fix trace event post-processingSandipan Das1-1/+3
In some cases, a symbol may have multiple aliases. Attempting to add an entry probe for such symbols results in a probe being added at an incorrect location while it fails altogether for return probes. This is only applicable for binaries with debug information. During the arch-dependent post-processing, the offset from the start of the symbol at which the probe is to be attached is determined and added to the start address of the symbol to get the probe's location. In case there are multiple aliases, this offset gets added multiple times for each alias of the symbol and we end up with an incorrect probe location. This can be verified on a powerpc64le system as shown below. $ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$" ... c000000000414290 T __se_sys_open c000000000414290 T sys_open $ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:" c000000000414290 <__se_sys_open>: c000000000414290: 19 01 4c 3c addis r2,r12,281 c000000000414294: 70 c4 42 38 addi r2,r2,-15248 c000000000414298: a6 02 08 7c mflr r0 c00000000041429c: e8 ff a1 fb std r29,-24(r1) c0000000004142a0: f0 ff c1 fb std r30,-16(r1) c0000000004142a4: f8 ff e1 fb std r31,-8(r1) c0000000004142a8: 10 00 01 f8 std r0,16(r1) c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1) c0000000004142b0: 78 23 9f 7c mr r31,r4 c0000000004142b4: 78 1b 7e 7c mr r30,r3 For both the entry probe and the return probe, the probe location should be _text+4276888 (0xc000000000414298). Since another alias exists for 'sys_open', the post-processing code will end up adding the offset (8 for powerpc64le) twice and perf will attempt to add the probe at _text+4276896 (0xc0000000004142a0) instead. Before: # perf probe -v -a sys_open probe-definition(0): sys_open symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Writing event: p:probe/sys_open _text+4276896 Added new event: probe:sys_open (on sys_open) ... # perf probe -v -a sys_open%return $retval probe-definition(0): sys_open%return symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/README write=0 Opening /sys/kernel/debug/tracing/kprobe_events write=1 Parsing probe_events: p:probe/sys_open _text+4276896 Group:probe Event:sys_open probe:p Writing event: r:probe/sys_open__return _text+4276896 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) After: # perf probe -v -a sys_open probe-definition(0): sys_open symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Writing event: p:probe/sys_open _text+4276888 Added new event: probe:sys_open (on sys_open) ... # perf probe -v -a sys_open%return $retval probe-definition(0): sys_open%return symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/README write=0 Opening /sys/kernel/debug/tracing/kprobe_events write=1 Parsing probe_events: p:probe/sys_open _text+4276888 Group:probe Event:sys_open probe:p Writing event: r:probe/sys_open__return _text+4276888 Added new event: probe:sys_open__return (on sys_open%return) ... Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Fixes: 99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF") Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-03perf auxtrace: Support for perf report -D for s390Thomas Richter1-0/+1
Add initial support for s390 auxiliary traces using the CPU-Measurement Sampling Facility. Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data file. Later patches will show the contents of the auxiliary traces. Setup the auxtrace queues and data structures for s390. A raw dump of the perf.data file now does not show an error when an auxtrace event is encountered. Output before: [root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace 0x128 [0x10]: failed to process type: 70 Error: failed to process sample 0x128 [0x10]: event: 70 . . ... raw event: size 16 bytes . 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............ 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0 [root@s35lp76 perf]# Output after: # ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE 0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5 0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000 offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4 .... Additional notes about the underlying hardware and software implementation, provided by Hendrik Brueckner (see Link: below). ============================================================================= The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain performance information on the mainframe. Basically, it was introduced with System z10 years ago for the z/Architecture, that means, 64-bit. For Linux, there are two facilities of interest, counter facility and sampling facility. The counter facility provides hardware counters for instructions, cycles, crypto-activities, and many more. The sampling facility is a hardware sampler that when started will write samples at a particular interval into a sampling buffer. At some point, for example, if a sample block is full, it generates an interrupt to collect samples (while the sampler continues to run). Few years ago, I started to provide the a perf PMU to use the counter and sampling facilities. Recently, the device driver was updated to also "export" the sampling buffer into the AUX area. Thomas now completed the related perf work to interpret and process these AUX data. If people are more interested in the sampling facility, they can have a look into: - The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05 http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a and to learn how-to use it for Linux on Z, have look at chapter 54, "Using the CPU-measurement facilities" in the: - Device Drivers, Features, and Commands, SC33-8411-34 http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf ============================================================================= Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar2-0/+2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-30perf tools: Fix the build on the alpine:edge distroArnaldo Carvalho de Melo2-0/+2
The UAPI file byteorder/little_endian.h uses the __always_inline define without including the header where it is defined, linux/stddef.h, this ends up working in all the other distros because that file gets included seemingly by luck from one of the files included from little_endian.h. But not on Alpine:edge, that fails for all files where perf_event.h is included but linux/stddef.h isn't include before that. Adding the missing linux/stddef.h file where it breaks on Alpine:edge to fix that, in all other distros, that is just a very small header anyway. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-24perf arm64: Generate system call table from asm/unistd.hKim Phillips2-0/+83
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Using the existing other arch scripts resulted in this error: tools/perf/arch/arm64/entry/syscalls//mksyscalltbl: 25: printf: __NR3264_ftruncate: expected numeric value because, unlike other arches, asm-generic's unistd.h does things like: #define __NR_ftruncate __NR3264_ftruncate Turning the scripts printf's %d into a %s resulted in this in the generated syscalls.c file: static const char *syscalltbl_arm64[] = { [__NR3264_ftruncate] = "ftruncate", So we use the host C compiler to fold the macros, and print them out from within a temporary C program, in order to get the correct output: static const char *syscalltbl_arm64[] = { [46] = "ftruncate", Committer notes: Testing this with a container with an old toolchain breaks because it ends up using the system's /usr/include/asm-generic/unistd.h, included from tools/arch/arm64/include/uapi/asm/unistd.h when what is desired is for it to include tools/include/uapi/asm-generic/unistd.h. Since all that tools/arch/arm64/include/uapi/asm/unistd.h is to set a define and then include asm-generic/unistd.h, do that directly and use tools/include/uapi/asm-generic/unistd.h as the file to get the syscall definitions to expand. Testing it: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/include/uapi/asm-generic/unistd.h Now works and generates in the syscall string table. Before it ended up as: $ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/arch/arm64/include/uapi/asm/unistd.h static const char *syscalltbl_arm64[] = { <stdin>: In function 'main': <stdin>:257:38: error: '__NR_getrandom' undeclared (first use in this function) <stdin>:257:38: note: each undeclared identifier is reported only once for each function it appears in <stdin>:258:41: error: '__NR_memfd_create' undeclared (first use in this function) <stdin>:259:32: error: '__NR_bpf' undeclared (first use in this function) <stdin>:260:37: error: '__NR_execveat' undeclared (first use in this function) tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: 47: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: /tmp/create-table-60liya: Permission denied }; $ Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180706163443.22626f5e9e10e5bab5e5c662@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-24perf powerpc: Fix callchain ip filtering when return address is in a registerSandipan Das1-2/+6
For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-24perf powerpc: Fix callchain ip filteringSandipan Das1-1/+1
For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-24perf kvm: Fix subcommands on s390Thomas Richter1-1/+1
With commit eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") s390 platform provides detailed type/model/capacity information in the CPU identifier string instead of just "IBM/S390". This breaks 'perf kvm' support which uses hard coded string IBM/S390 to compare with the CPU identifier string. Fix this by changing the comparison. Reported-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Tested-by: Stefan Raspl <raspl@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: stable@vger.kernel.org Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-11perf tools: Fix compilation errors on gcc8Jiri Olsa1-1/+1
We are getting following warnings on gcc8 that break compilation: $ make CC jvmti/jvmti_agent.o jvmti/jvmti_agent.c: In function ‘jvmti_open’: jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \ writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=] snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); There's no point in checking the result of snprintf call in jvmti_open, the following open call will fail in case the name is mangled or too long. Using tools/lib/ function scnprintf that touches the return value from the snprintf() calls and thus get rid of those warnings. $ make DEBUG=1 CC arch/x86/util/perf_regs.o arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’: arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation] strncpy(prefix, "+0", 2); ^~~~~~~~~~~~~~~~~~~~~~~~ Using scnprintf instead of the strncpy (which we know is safe in here) to get rid of that warning. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'Arnaldo Carvalho de Melo1-0/+2
This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf report powerpc: Fix crash if callchain is emptySandipan Das1-1/+1
For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-04perf annotate: Move objdump_path to struct annotation_optionsArnaldo Carvalho de Melo2-5/+3
One more step in grouping annotation options. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-sogzdhugoavm6fyw60jnb0vs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-23perf machine: Synthesize and process mmap events for x86 PTI entry trampolinesAdrian Hunter2-0/+77
Like the kernel text, the location of x86 PTI entry trampolines must be recorded in the perf.data file. Like the kernel, synthesize a mmap event for that, and add processing for it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1526986485-6562-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-23perf machine: Create maps for x86 PTI entry trampolinesAdrian Hunter2-0/+104
Create maps for x86 PTI entry trampolines, based on symbols found in kallsyms. It is also necessary to keep track of whether the trampolines have been mapped particularly when the kernel dso is kcore. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1526986485-6562-9-git-send-email-adrian.hunter@intel.com [ Fix extra_kernel_map_info.cnt designed struct initializer on gcc 4.4.7 (centos:6, etc) ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26perf map: Remove map_type arg from map_groups__find()Arnaldo Carvalho de Melo4-4/+4
One more step in ditching the split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4pour7egur07tkrpbynawemv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26perf map: Shorten map_groups__find() signatureArnaldo Carvalho de Melo4-4/+4
Removing the map_type, that is going away. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-18iiiw25r75xn7zlppjldk48@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26perf thread: Introduce thread__find_symbol()Arnaldo Carvalho de Melo1-2/+1
Out of thread__find_addr_location(..., MAP__FUNCTION, ...), idea here is to continue removing references to MAP__{FUNCTION,VARIABLE} ahead of getting both types of symbols in the same rbtree, as various places do two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE. So thread__find_symbol() will eventually do just that, and 'struct symbol' will have the symbol type, for code that cares about that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-n7528en9e08yd3flzmb26tth@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf record: Fix s390 undefined record__auxtrace_init() return valueThomas Richter1-0/+1
Command 'perf record' calls: cmd_report() record__auxtrace_init() auxtrace_record__init() On s390 function auxtrace_record__init() returns random return value due to missing initialization. This sometime causes 'perf record' to exit immediately without error message and creating a perf.data file. Fix this by setting error the return code to zero before returning from platform specific functions which may not set the error code in call cases. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf list: Remove s390 specific strcmp_cpuid_cmp functionThomas Richter1-18/+0
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to match the created cpuid string for s390. The pattern also checks for the counter first version number and counter second version number ([13]\.[1-5]) and the authorization field which follows. These numbers do not exist in the cpuid identification string when perf commands are executed on a z/VM environment (which does not support CPU counter measurement facility). CPUID string for LPAR: cpuid : IBM,3906,704,M03,3.5,002f CPUID string for z/VM: cpuid : IBM,2964,702,N96 This allows the removal of s390 specific cpuid compare code and uses the common compare function with its regular expression matching algorithm. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-19coresight: Move to SPDX identifierMathieu Poirier4-48/+4
Move CoreSight headers to the SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17tools/headers: Synchronize kernel ABI headers, v4.17-rc1Ingo Molnar2-355/+359
Sync the following tooling headers with the latest kernel version: tools/arch/arm/include/uapi/asm/kvm.h - New ABI: KVM_REG_ARM_* tools/arch/x86/include/asm/required-features.h - Removal of NEED_LA57 dependency tools/arch/x86/include/uapi/asm/kvm.h - New KVM ABI: KVM_SYNC_X86_* tools/include/uapi/asm-generic/mman-common.h - New ABI: MAP_FIXED_NOREPLACE flag tools/include/uapi/linux/bpf.h - New ABI: BPF_F_SEQ_NUMBER functions tools/include/uapi/linux/if_link.h - New ABI: IFLA tun and rmnet support tools/include/uapi/linux/kvm.h - New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups tools/include/uapi/sound/asound.h - New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier tools/perf/arch/x86/entry/syscalls/syscall_64.tbl - The x86 system call table description changed due to the ptregs changes and the renames, in: d5a00528b58c: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() 5ac9efa3c50d: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention ebeb8c82ffaf: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 Also fix the x86 syscall table warning: -Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' +Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' None of these changes impact existing tooling code, so we only have to copy the kernel version. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Clark Williams <williams@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takuya Yamamoto <tkydevel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13perf annotate: Handle variables in 'sub', 'or' and many other instructionsArnaldo Carvalho de Melo1-1/+66
Just like is done for 'mov' and others that can have as source or targets variables resolved by objdump, to make them more compact: - orb $0x4,0x224d71(%rip) # 226ca4 <_rtld_global+0xca4> + orb $0x4,_rtld_global+0xca4 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-efex7746id4w4wa03nqxvh3m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf tests: Run dwarf unwind test on arm32Kim Phillips3-0/+30
Enable the unwind test on arm32: $ perf test unwind 58: DWARF unwind : Ok Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180410191624.a3a468670dd4548c66d3d094@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Pass function descriptor to its instruction parsing routinesArnaldo Carvalho de Melo1-2/+3
We need that to figure out if jumps have targets in a different function. E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1 has a line like this: jne c469be <cpp_named_operator2name@@Base+0xa72> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf tools arm64: Add libdw DWARF post unwind support for ARM64Kim Phillips5-0/+91
Based on prior work: https://lkml.org/lkml/2014/5/6/395 and on how other arches add libdw unwind support. Includes support for running the unwind test, e.g., on a system with only elfutils' libdw 0.170, the test now runs, and successfully: $ ./perf test unwind 56: Test dwarf unwind : Ok Originally-by: Jean Pihet <jean.pihet@linaro.org> Reported-by: Christian Hansen <chansen3@cisco.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180308211030.4ee4a0d6ff6dc5cda1b567d4@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Handle s390 PC relative load and store instruction.Thomas Richter1-0/+63
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Fix s390 target function disassemblyThomas Richter1-1/+52
'perf annotate' displays function call assembler instructions with a right arrow. Hitting enter on this line/instruction causes the browser to disassemble this target function and show it on the screen. On s390 this results in an error message 'The called function was not found.' The function call assembly line parsing does not handle the s390 bras and brasl instructions. Function call__parse expects the target as first operand: callq e9140 <__fxstat> S390 has a register number as first operand: brasl %r14,41d60 <abort> Therefore the target addresses on s390 are always zero which is an invalid address. Introduce a s390 specific call parsing function which skips the first operand on s390. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf intel-pt/bts: In auxtrace_record__init_intel() evlist is never NULLAdrian Hunter1-9/+5
Tidy auxtrace_record__init_intel() slightly by recognizing that evlist is never NULL. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1520431349-30689-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf mmap: Simplify perf_mmap__read_init()Kan Liang1-2/+1
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments to perf_mmap__read_init(). The data is stored in the struct perf_mmap. Discard the parameters. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf mmap: Simplify perf_mmap__read_event()Kan Liang1-1/+1
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument to perf_mmap__read_event(). Discard them. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1520350567-80082-7-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf mmap: Simplify perf_mmap__consume()Kan Liang1-1/+1
It isn't necessary to pass the 'overwrite' argument to perf_mmap__consume(). Discard it. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1520350567-80082-6-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05perf test: Switch to new perf_mmap__read_event() interface for time-to-tscKan Liang1-2/+9
The perf test 'time-to-tsc' still use the legacy interface. No functional change. Commiter notes: Testing it: # perf test tsc 57: Convert perf time to TSC : Ok # Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1519945751-37786-10-git-send-email-kan.liang@linux.intel.com [ Changed bool parameters from 0 to 'false', as per Jiri comment ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-19perf s390: Fix reading cpuid model informationThomas Richter1-1/+1
Commit eca0fa28cd0d (perf record: Provide detailed information on s390 CPU") fixed a build error on Ubuntu. However the fix uses the wrong size to print the model information. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/20180219102444.96900-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf cpuid: Introduce a platform specific cpuid compare functionThomas Richter1-0/+18
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on s390 returns a complete description of the CPU and its capabilities, which is a comma separated list. To map the CPU type with the value defined in the pmu-events/arch/s390/mapfile.csv, introduce an architecture specific cpuid compare function named strcmp_cpuid_str() The currently used regex algorithm is defined as the weak default and will be used if no platform specific one is defined. This matches the current behavior. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-3-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf annotate: Scan cpuid for s390 and save machine typeThomas Richter1-1/+26
Scan the cpuid string and extract the type number for later use. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-2-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf record: Provide detailed information on s390 CPUThomas Richter1-5/+125
When perf record ... is setup to record data, the s390 cpu information was a fixed string "IBM/S390". Replace this string with one containing more information about the machine. The information included in the cpuid is a comma separated list: manufacturer,type,model-capacity,model[,version,authorization] with - manufacturer: up to 16 byte name of the manufacturer (IBM). - type: a four digit number refering to the machine generation. - model-capacitiy: up to 16 characters describing number of cpus etc. - model: up to 16 characters describing model. - version: the CPU-MF counter facility version number, available on LPARs only, omitted on z/VM guests. - authorization: the CPU-MF counter facility authorization level, available on LPARs only, omitted on z/VM guests. Before: [root@s8360047 perf]# ./perf record -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ] [root@s8360047 perf]# ./perf report --header | fgrep cpuid # cpuid : IBM/S390 [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf report --header|fgrep cpuid # cpuid : IBM,3906,704,M03,3.5,002f [root@s35lp76 perf]# Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-1-tmricht@linux.vnet.ibm.com [ Use scnprintf instead of strncat to fix build errors on gcc GNU C99 5.4.0 20160609 -march=zEC12 -m64 -mzarch -ggdb3 -O6 -std=gnu99 -fPIC -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf powerpc: Generate system call table from asm/unistd.hRavi Bangoria2-0/+62
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129083417.31240-3-ravi.bangoria@linux.vnet.ibm.com [ Made it generate syscall_32.c as well to fix the build on 32-bit ppc ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf cs-etm: Properly deal with cpu mapsMathieu Poirier1-15/+36
This patch allows the CoreSight AUX info section to fit topologies where only a subset of all available CPUs are present, avoiding at the same time accessing the ETM configuration areas of CPUs that have been offlined. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518478737-24649-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 23:23:49 +0300