summaryrefslogtreecommitdiff
path: root/tools/objtool
AgeCommit message (Collapse)AuthorFilesLines
2020-06-20objtool: Ignore empty alternativesJulien Thierry1-0/+6
[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20objtool: Fix stack offset tracking for indirect CFAsJosh Poimboeuf1-1/+1
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02objtool: Support Clang non-section symbols in ORC dumpJosh Poimboeuf1-17/+27
[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02objtool: Fix CONFIG_UBSAN_TRAP unreachable warningsJosh Poimboeuf1-2/+15
[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf1-4/+1
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28x86/decoder: Add TEST opcode to Group3-2Masami Hiramatsu1-1/+1
[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ] Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2 Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31x86/insn: Add some Intel instructions to the opcode mapAdrian Hunter1-6/+12
[ Upstream commit b980be189c9badba50634671e2303e92bf28e35a ] Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01x86/insn: Fix awk regexp warningsAlexander Kapshuk1-2/+2
commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream. gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-05objtool: Clobber user CFLAGS variableJosh Poimboeuf1-1/+1
commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream. If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> CC: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-05objtool: Query pkg-config for libelf locationRolf Eike Beer1-2/+5
commit 056d28d135bca0b1d0908990338e00e9dadaf057 upstream. If it is not in the default location, compilation fails at several points. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-09objtool: Add rewind_stack_do_exit() to the noreturn listJosh Poimboeuf1-0/+1
commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 upstream. This fixes the following warning seen on GCC 7.3: arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-09objtool: Add machine_real_restart() to the noreturn listJosh Poimboeuf1-0/+1
commit 684fb246578b9e81fc7b4ca5c71eae22edb650b2 upstream. machine_real_restart() is annotated as '__noreturn", so add it to the objtool noreturn list. This fixes the following warning with clang and CONFIG_CC_OPTIMIZE_FOR_SIZE=y: arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart() falls through to next function machine_power_off() Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/791712792aa4431bdd55bf1beb33a169ddf3b4a2.1529423255.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-06objtool: Support GCC 9 cold subfunction naming schemeJosh Poimboeuf1-1/+1
commit bcb6fb5da77c2a228adf07cc9cb1a0c2aa2001c6 upstream. Starting with GCC 8, a lot of unlikely code was moved out of line to "cold" subfunctions in .text.unlikely. For example, the unlikely bits of: irq_do_set_affinity() are moved out to the following subfunction: irq_do_set_affinity.cold.49() Starting with GCC 9, the numbered suffix has been removed. So in the above example, the cold subfunction is instead: irq_do_set_affinity.cold() Tweak the objtool subfunction detection logic so that it detects both GCC 8 and GCC 9 naming schemes. Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25objtool: Support per-function rodata sectionsAllan Xavier4-9/+37
commit 4a60aa05a0634241ce17f957bf9fb5ac1eed6576 upstream. Add support for processing switch jump tables in objects with multiple .rodata sections, such as those created by '-ffunction-sections' and '-fdata-sections'. Currently, objtool always looks in .rodata for jump table information, which results in many "sibling call from callable instruction with modified stack frame" warnings with objects compiled using those flags. The fix is comprised of three parts: 1. Flagging all .rodata sections when importing ELF information for easier checking later. 2. Keeping a reference to the section each relocation is from in order to get the list_head for the other relocations in that section. 3. Finding jump tables by following relocations to .rodata sections, rather than always referencing a single global .rodata section. The patch has been tested without data sections enabled and no differences in the resulting orc unwind information were seen. Note that as objtool adds terminators to end of each .text section the unwind information generated between a function+data sections build and a normal build aren't directly comparable. Manual inspection suggests that objtool is now generating the correct information, or at least making more of an effort to do so than it did previously. Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-15objtool: Don't use ignore flag for fake jumpsJosh Poimboeuf1-3/+5
[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ] The ignore flag is set on fake jumps in order to keep add_jump_destinations() from setting their jump_dest, since it already got set when the fake jump was created. But using the ignore flag is a bit of a hack. It's normally used to skip validation of an instruction, which doesn't really make sense for fake jumps. Also, after the next patch, using the ignore flag for fake jumps can trigger a false "why am I validating an ignored function?" warning. Instead just add an explicit check in add_jump_destinations() to skip fake jumps. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25objtool: Allow AR to be overridden with HOSTARNathan Chancellor1-1/+2
commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21objtool: Fix function fallthrough detectionJosh Poimboeuf1-1/+2
commit e6f393bc939d566ce3def71232d8013de9aaadde upstream. When a function falls through to the next function due to a compiler bug, objtool prints some obscure warnings. For example: drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x95: return with modified stack frame drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x0: stack state mismatch: cfa1=7+32 cfa2=7+8 Instead it should be printing: drivers/regulator/core.o: warning: objtool: regulator_supply_is_couple() falls through to next function regulator_count_voltages() This used to work, but was broken by the following commit: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") The padding nops at the end of a function aren't actually part of the function, as defined by the symbol table. So the 'func' variable in validate_branch() is getting cleared to NULL when a padding nop is encountered, breaking the fallthrough detection. If the current instruction doesn't have a function associated with it, just consider it to be part of the previously detected function by not overwriting the previous value of 'func'. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/546d143820cd08a46624ae8440d093dd6c902cae.1557766718.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27objtool: Move objtool_file struct off the stackJosh Poimboeuf1-1/+2
commit 0c671812f152b628bd87c0af49da032cc2a2c319 upstream. Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73fe7eb ("objtool: Add several performance improvements") Reported-by: Vassili Karpov <moosotc@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17objtool: Fix segfault in .cold detection with -ffunction-sectionsArtem Savkov1-3/+14
[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ] Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS. Fix by copying the search string instead of modifying it in place. Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17objtool: Fix double-free in .cold detection error pathArtem Savkov1-1/+1
[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ] If read_symbols() fails during second list traversal (the one dealing with ".cold" subfunctions) it frees the symbol, but never deletes it from the list/hash_table resulting in symbol being freed again in elf_close(). Fix it by just returning an error, leaving cleanup to elf_close(). Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-24objtool: Support GCC 8 '-fnoreorder-functions'Josh Poimboeuf1-13/+28
[ Upstream commit 08b393d01c88aff27347ed2b1b354eb4db2f1532 ] Since the following commit: cd77849a69cf ("objtool: Fix GCC 8 cold subfunction detection for aliased functions") ... if the kernel is built with EXTRA_CFLAGS='-fno-reorder-functions', objtool can get stuck in an infinite loop. That flag causes the new GCC 8 cold subfunctions to be placed in .text instead of .text.unlikely. But it also has an unfortunate quirk: in the symbol table, the subfunction (e.g., nmi_panic.cold.7) is nested inside the parent (nmi_panic). That function overlap confuses objtool, and causes it to get into an infinite loop in next_insn_same_func(). Here's Allan's description of the loop: "Objtool iterates through the instructions in nmi_panic using next_insn_same_func. Once it reaches the end of nmi_panic at 0x534 it jumps to 0x528 as that's the start of nmi_panic.cold.7. However, since the instructions starting at 0x528 are still associated with nmi_panic objtool will get stuck in a loop, continually jumping back to 0x528 after reaching 0x534." Fix it by shortening the length of the parent function so that the functions no longer overlap. Reported-and-analyzed-by: Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Allan Xavier <allan.x.xavier@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9e704c52bee651129b036be14feda317ae5606ae.1530136978.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11Kbuild: fix # escaping in .cmd files for future MakeRasmus Villemoes1-1/+1
commit 9564a8cf422d7b58f6e857e3546d346fa970191e upstream. I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20objtool, kprobes/x86: Sync the latest <asm/insn.h> header with ↵Ingo Molnar1-0/+18
tools/objtool/arch/x86/include/asm/insn.h [ Upstream commit 4fe875e4bd3cae85ae6f6eaf77f63fabe613b66e ] The following commit: ee6a7354a362: kprobes/x86: Prohibit probing on exception masking instructions Modified <asm/insn.h>, adding the insn_masking_exception() function. Sync the tooling version of the header to it, to fix this warning: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Francis Deslauriers <francis.deslauriers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Yonghong Song <yhs@fb.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S . Miller" <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool: Fix "noreturn" detection for recursive sibling callsJosh Poimboeuf1-3/+7
commit 0afd0d9e0e7879d666c1df2fa1bea4d8716909fe upstream. Objtool has some crude logic for detecting static "noreturn" functions (aka "dead ends"). This is necessary for being able to correctly follow GCC code flow when such functions are called. It's remotely possible for two functions to call each other via sibling calls. If they don't have RET instructions, objtool's noreturn detection logic goes into a recursive loop: drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!) drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!) Instead of reporting an error in this case, consider the functions to be non-dead-ends. Reported-and-tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: damian <damian.tometzki@icloud.com> Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool: Detect RIP-relative switch table references, part 2Josh Poimboeuf1-25/+12
commit 7dec80ccbe310fb7e225bf21c48c672bb780ce7b upstream. With the following commit: fd35c88b7417 ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec2993b1f ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool: Detect RIP-relative switch table referencesJosh Poimboeuf1-15/+18
commit 6f5ec2993b1f39aed12fa6fd56e8dc2272ee8a33 upstream. Typically a switch table can be found by detecting a .rodata access followed an indirect jump: 1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx 1970: 00 196d: R_X86_64_32S .rodata+0x438 1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a> 1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4 Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata access uses RIP-relative addressing: 19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8> 19c0: R_X86_64_PC32 .rodata+0x45c 19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd> 19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4 In this case the relocation addend needs to be adjusted accordingly in order to find the location of the switch table. The fix is for case 3 (as described in the comments), but also make the existing case 1 & 2 checks more precise by only adjusting the addend for R_X86_64_PC32 relocations. This fixes the following warnings: drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool: Support GCC 8 switch tablesJosh Poimboeuf1-2/+22
commit fd35c88b74170d9335530d9abf271d5d73eb5401 upstream. With GCC 8, some issues were found with the objtool switch table detection. 1) In the .rodata section, immediately after the switch table, there can be another object which contains a pointer to the function which had the switch statement. In this case objtool wrongly considers the function pointer to be part of the switch table. Fix it by: a) making sure there are no pointers to the beginning of the function; and b) making sure there are no gaps in the switch table. Only the former was needed, the latter adds additional protection for future optimizations. 2) In find_switch_table(), case 1 and case 2 are missing the check to ensure that the .rodata switch table data is anonymous, i.e. that it isn't already associated with an ELF symbol. Fix it by adding the same find_symbol_containing() check which is used for case 3. This fixes the following warnings with GCC 8: drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72 net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48 drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24 drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: damian <damian.tometzki@icloud.com> Link: http://lkml.kernel.org/r/20180510224849.xwi34d6tzheb5wgw@treble Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool: Support GCC 8's cold subfunctionsJosh Poimboeuf3-44/+93
commit 13810435b9a7014fb92eb715f77da488f3b65b99 upstream. GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in .text.unlikely. Properly detect the new subfunctions and treat them as extensions of the original functions. This fixes a bunch of warnings like: kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame Reported-and-tested-by: damian <damian.tometzki@icloud.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/0965e7fcfc5f31a276f0c7f298ff770c19b68706.1525923412.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12objtool: Add Clang supportJosh Poimboeuf1-0/+11
commit 3c1f05835cbf9fdfe60b81c718d82ceb94b6c55e upstream. Since the ORC unwinder was made the default on x86_64, Clang-built defconfig kernels have triggered some new objtool warnings: drivers/gpu/drm/i915/i915_gpu_error.o: warning: objtool: i915_error_printf()+0x6c: return with modified stack frame drivers/gpu/drm/i915/intel_display.o: warning: objtool: pipe_config_err()+0xa6: return with modified stack frame The problem is that objtool has never seen clang-built binaries before. Shockingly enough, objtool is apparently able to follow the code flow mostly fine, except for one instruction sequence. Instead of a LEAVE instruction, clang restores RSP and RBP the long way: 67c: 48 89 ec mov %rbp,%rsp 67f: 5d pop %rbp Teach objtool about this new code sequence. Reported-and-test-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/fce88ce81c356eedcae7f00ed349cfaddb3363cc.1521741586.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Fix 32-bit buildJosh Poimboeuf1-20/+7
commit 63474dc4ac7ed3848a4786b9592dd061901f606d upstream. Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit host. This also simplifies read_retpoline_hints() a bit and makes its implementation similar to most of the other annotation reading functions. Reported-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b5bc2231b8ad ("objtool: Add retpoline validation") Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Fix another switch table detection issueJosh Poimboeuf1-1/+5
commit 1402fd8ed7e5bda1b3e7613b70780b0db392d1e6 upstream. Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Add module specific retpoline rulesPeter Zijlstra3-2/+12
commit ca41b97ed9124fd62323a162de5852f6e28f94b8 upstream. David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Add retpoline validationPeter Zijlstra4-3/+89
commit b5bc2231b8ad4387c9641f235ca0ad8cd300b6df upstream. David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Use existing global variables for optionsPeter Zijlstra5-10/+10
commit 43a4525f80534530077683f6472d8971646b0ace upstream. Use the existing global variables instead of passing them around and creating duplicate global variables. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22objtool: Fix segfault in ignore_unreachable_insn()Josh Poimboeuf1-3/+9
commit fe24e27128252c230a34a6c628da2bf1676781ea upstream. Peter Zijlstra's patch for converting WARN() to use UD2 triggered a bunch of false "unreachable instruction" warnings, which then triggered a seg fault in ignore_unreachable_insn(). The seg fault happened when it tried to dereference a NULL 'insn->func' pointer. Thanks to static_cpu_has(), some functions can jump to a non-function area in the .altinstr_aux section. That breaks ignore_unreachable_insn()'s assumption that it's always inside the original function. Make sure ignore_unreachable_insn() only follows jumps within the current function. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild test robot <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16objtool: Fix switch-table detectionPeter Zijlstra2-2/+40
commit 99ce7962d52d1948ad6f2785e308d48e76e0a6ef upstream. Linus reported that GCC-7.3 generated a switch-table construct that confused objtool. It turns out that, in particular due to KASAN, it is possible to have unrelated .rodata usage in between the .rodata setup for the switch-table and the following indirect jump. The simple linear reverse search from the indirect jump would hit upon the KASAN .rodata usage first and fail to find a switch_table, resulting in a spurious 'sibling call with modified stack frame' warning. Fix this by creating a 'jump-stack' which we can 'unwind' during reversal, thereby skipping over much of the in-between code. This is not fool proof by any means, but is sufficient to make the known cases work. Future work would be to construct more comprehensive flow analysis code. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-07objtool: Warn on stripped section symbolJosh Poimboeuf1-0/+5
commit 830c1e3d16b2c1733cd1ec9c8f4d47a398ae31bc With the following fix: 2a0098d70640 ("objtool: Fix seg fault with gold linker") ... a seg fault was avoided, but the original seg fault condition in objtool wasn't fixed. Replace the seg fault with an error message. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/dc4585a70d6b975c99fc51d1957ccdde7bd52f3a.1517284349.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-07objtool: Add support for alternatives at the end of a sectionJosh Poimboeuf1-22/+31
commit 17bc33914bcc98ba3c6b426fd1c49587a25c0597 Now that the previous patch gave objtool the ability to read retpoline alternatives, it shows a new warning: arch/x86/entry/entry_64.o: warning: objtool: .entry_trampoline: don't know how to handle alternatives at end of section This is due to the JMP_NOSPEC in entry_SYSCALL_64_trampoline(). Previously, objtool ignored this situation because it wasn't needed, and it would have required a bit of extra code. Now that this case exists, add proper support for it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2a30a3c2158af47d891a76e69bb1ef347e0443fd.1517284349.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-07objtool: Improve retpoline alternative handlingJosh Poimboeuf1-20/+16
commit a845c7cf4b4cb5e9e3b2823867892b27646f3a98 Currently objtool requires all retpolines to be: a) patched in with alternatives; and b) annotated with ANNOTATE_NOSPEC_ALTERNATIVE. If you forget to do both of the above, objtool segfaults trying to dereference a NULL 'insn->call_dest' pointer. Avoid that situation and print a more helpful error message: quirks.o: warning: objtool: efi_delete_dummy_variable()+0x99: unsupported intra-function call quirks.o: warning: objtool: If this is a retpoline, please patch it in with alternatives and annotate it with ANNOTATE_NOSPEC_ALTERNATIVE. Future improvements can be made to make objtool smarter with respect to retpolines, but this is a good incremental improvement for now. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/819e50b6d9c2e1a22e34c1a636c0b2057cc8c6e5.1517284349.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23objtool: Improve error message for bad file argumentJosh Poimboeuf1-1/+3
commit 385d11b152c4eb638eeb769edcb3249533bb9a00 upstream. If a nonexistent file is supplied to objtool, it complains with a non-helpful error: open: No such file or directory Improve it to: objtool: Can't open 'foo': No such file or directory Reported-by: Markus <M4rkusXXL@web.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23objtool: Fix seg fault caused by missing parameterSimon Ser1-1/+3
commit d89e426499cf36b96161bd32970d6783f1fbcb0e upstream. Fix a seg fault when no parameter is provided to 'objtool orc'. Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23objtool: Fix Clang enum conversion warningLukas Bulwahn1-1/+1
commit e7e83dd3ff1dd2f9e60213f6eedc7e5b08192062 upstream. Fix the following Clang enum conversion warning: arch/x86/decode.c:141:20: error: implicit conversion from enumeration type 'enum op_src_type' to different enumeration type 'enum op_dest_type' [-Werror,-Wenum-conversion] op->dest.type = OP_SRC_REG; ~ ^~~~~~~~~~ It just happened to work before because OP_SRC_REG and OP_DEST_REG have the same value. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at> Reviewed-by: Nick Desaulniers <nick.desaulniers@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0") Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23objtool: Fix seg fault with clang-compiled objectsSimon Ser1-0/+2
commit ce90aaf5cde4ce057b297bb6c955caf16ef00ee6 upstream. Fix a seg fault which happens when an input file provided to 'objtool orc generate' doesn't have a '.shstrtab' section (for instance, object files produced by clang don't have this section). Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23tools/objtool/Makefile: don't assume sync-check.sh is executableAndrew Morton1-1/+1
commit 0f908ccbeca99ddf0ad60afa710e72aded4a5ea7 upstream. patch(1) loses the x bit. So if a user follows our patching instructions in Documentation/admin-guide/README.rst, their kernel will not compile. Fixes: 3bd51c5a371de ("objtool: Move kernel headers/code sync check to a script") Reported-by: Nicolas Bock <nicolasbock@gentoo.org> Reported-by Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17objtool: Allow alternatives to be ignoredJosh Poimboeuf2-7/+57
commit 258c76059cece01bebae098e81bacb1af2edad17 upstream. Getting objtool to understand retpolines is going to be a bit of a challenge. For now, take advantage of the fact that retpolines are patched in with alternatives. Just read the original (sane) non-alternative instruction, and ignore the patched-in retpoline. This allows objtool to understand the control flow *around* the retpoline, even if it can't yet follow what's inside. This means the ORC unwinder will fail to unwind from inside a retpoline, but will work fine otherwise. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17objtool: Detect jumps to retpoline thunksJosh Poimboeuf1-0/+7
commit 39b735332cb8b33a27c28592d969e4016c86c3ea upstream. A direct jump to a retpoline thunk is really an indirect jump in disguise. Change the objtool instruction type accordingly. Objtool needs to know where indirect branches are so it can detect switch statement jump tables. This fixes a bunch of warnings with CONFIG_RETPOLINE like: arch/x86/events/intel/uncore_nhmex.o: warning: objtool: nhmex_rbox_msr_enable_event()+0x44: sibling call from callable instruction with modified stack frame kernel/signal.o: warning: objtool: copy_siginfo_to_user()+0x91: sibling call from callable instruction with modified stack frame ... Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-2-git-send-email-dwmw@amazon.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29x86/decoder: Fix and update the opcodes mapRandy Dunlap1-3/+12
commit f5b5fab1780c98b74526dbac527574bd02dc16f8 upstream Update x86-opcode-map.txt based on the October 2017 Intel SDM publication. Fix INVPID to INVVPID. Add UD0 and UD1 instruction opcodes. Also sync the objtool and perf tooling copies of this file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29objtool: Fix 64-bit build on 32-bit hostMikulas Patocka2-6/+9
commit 14c47b54b0d9389e3ca0718e805cdd90c5a4303a upstream. The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit host. Building the kernel on a i386 or x32 host fails with: orc_dump.c: In function 'orc_dump': orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types] if (elf_getshdrnum(elf, &nr_sections)) { ^ In file included from /usr/local/include/gelf.h:32:0, from elf.h:22, from warn.h:26, from orc_dump.c:20: /usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *' extern int elf_getshdrnum (Elf *__elf, size_t *__dst); ^~~~~~~~~~~~~~ orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=] printf("%s+%lx:", name, rela.r_addend); ~~^ ~~~~~~~~~~~~~ %llx Fix the build failure. Another problem is that if the user specifies HOSTCC or HOSTLD variables, they are ignored in the objtool makefile. Change the Makefile to respect these variables. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Joachim <svenjoac@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29tools/headers: Sync objtool UAPI headerIngo Molnar1-0/+10
commit a356d2ae50790f49858ebed35da9e206336fafee upstream. objtool grew this new warning: Warning: synced file at 'tools/objtool/arch/x86/include/asm/inat.h' differs from latest kernel version at 'arch/x86/include/asm/inat.h' which upstream header grew new INAT_SEG_* definitions. Sync up the tooling version of the header. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29objtool: Fix cross-buildJosh Poimboeuf1-1/+1
commit 9eb719855f6c9b21eb5889d9ac2ca1c60527ad89 upstream. Stephen Rothwell reported this cross-compilation build failure: | In file included from orc_dump.c:19:0: | orc.h:21:10: fatal error: asm/orc_types.h: No such file or directory | ... Caused by: 6a77cff819ae ("objtool: Move synced files to their original relative locations") Use the proper arch header files location, not the host-arch location. Bisected-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-Next Mailing List <linux-next@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171108030152.bd76eahiwjwjt3kp@treble Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-06 21:52:07 +0300