| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Teach bpftool to recognize arena map type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-10-alexei.starovoitov@gmail.com
|
|
Add ability to specify a network interface used to resolve XDP hints
kfuncs when loading program through bpftool.
Usage:
bpftool prog load [...] xdpmeta_dev <ifname>
Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable
mistake that results in not very descriptive errors,
so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated,
followed by 'bpftool map create [...] dev <ifname>' for consistency.
Now, to offload program, execute:
bpftool prog load [...] offload_dev <ifname>
To offload map:
bpftool map create [...] offload_dev <ifname>
'dev <ifname>' still performs offloading in the commands above, but now
triggers a warning and is excluded from bash completion.
'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because
'xdpmeta_dev' basically makes a program device-bound without loading it
onto the said device. For now, offloaded programs cannot use XDP hints [0],
but if this changes, using 'offload_dev <ifname>' should cover this case.
[0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com
|
|
When using `bpftool map dump` with map_of_maps, it is usually
more convenient to show the inner map id instead of raw value.
We are changing the plain print behavior to show inner_map_id
instead of hex value, this would help with quick look up of
inner map with `bpftool map dump id <inner_map_id>`.
To avoid disrupting scripted behavior, we will add a new
`inner_map_id` field to json output instead of replacing value.
plain print:
```
$ bpftool map dump id 138
Without Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
value:
8b 00 00 00
Found 1 element
With Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
inner_map_id:
139
Found 1 element
```
json print:
```
$ bpftool -p map dump id 567
Without Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
]
}
]
With Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
],
"inner_map_id": 568
}
]
```
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230427120313.43574-1-kuro@kuroa.me
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Split the bpf_obj_get_info_by_fd() call in build_btf_type_table() in
two, since knowing the type helps with the Memory Sanitizer.
Improve map_parse_fd_and_info() type safety by using
struct bpf_map_info * instead of void * for info.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230214231221.249277-4-iii@linux.ibm.com
|
|
The function contains a single btf__free() call which can be
inlined. Credits to Yonghong Song.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-6-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpftool is now totally compliant with libbpf 1.0 mode and is not
expected to be compiled with pre-1.0, let's clean-up the usage of
libbpf_get_error().
The changes stay aligned with returned errors always negative.
- In tools/bpf/bpftool/btf.c This fixes an uninitialized local
variable `err` in function do_dump() because it may now be returned
without having been set.
- This also removes the checks on NULL pointers before calling
btf__free() because that function already does the check.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Link: https://lore.kernel.org/r/20221120112515.38165-5-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
|
|
Add support for new cgroup local storage
Acked-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042901.674177-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The JIT disassembler in bpftool is the only components (with the JSON
writer) using asserts to check the return values of functions. But it
does not do so in a consistent way, and diasm_print_insn() returns no
value, although sometimes the operation failed.
Remove the asserts, and instead check the return values, print messages
on errors, and propagate the error to the caller from prog.c.
Remove the inclusion of assert.h from jit_disasm.c, and also from map.c
where it is unused.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We want to support a ringbuf map type where samples are published from
user-space, to be consumed by BPF programs. BPF currently supports a
kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF
map type. We'll need to define a new map type for user-space -> kernel,
as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply
to a user-space producer ring buffer, and we'll want to add one or
more helper functions that would not apply for a kernel-producer
ring buffer.
This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type
definition. The map type is useless in its current form, as there is no
way to access or use it for anything until we one or more BPF helpers. A
follow-on patch will therefore add a new helper function that allows BPF
programs to run callbacks on samples that are published to the ring
buffer.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com
|
|
This reverts commit a777e18f1bcd32528ff5dfd10a6629b655b05eb8.
In commit a777e18f1bcd ("bpftool: Use libbpf 1.0 API mode instead of
RLIMIT_MEMLOCK"), we removed the rlimit bump in bpftool, because the
kernel has switched to memcg-based memory accounting. Thanks to the
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK, we attempted to keep compatibility
with other systems and ask libbpf to raise the limit for us if
necessary.
How do we know if memcg-based accounting is supported? There is a probe
in libbpf to check this. But this probe currently relies on the
availability of a given BPF helper, bpf_ktime_get_coarse_ns(), which
landed in the same kernel version as the memory accounting change. This
works in the generic case, but it may fail, for example, if the helper
function has been backported to an older kernel. This has been observed
for Google Cloud's Container-Optimized OS (COS), where the helper is
available but rlimit is still in use. The probe succeeds, the rlimit is
not raised, and probing features with bpftool, for example, fails.
A patch was submitted [0] to update this probe in libbpf, based on what
the cilium/ebpf Go library does [1]. It would lower the soft rlimit to
0, attempt to load a BPF object, and reset the rlimit. But it may induce
some hard-to-debug flakiness if another process starts, or the current
application is killed, while the rlimit is reduced, and the approach was
discarded.
As a workaround to ensure that the rlimit bump does not depend on the
availability of a given helper, we restore the unconditional rlimit bump
in bpftool for now.
[0] https://lore.kernel.org/bpf/20220609143614.97837-1-quentin@isovalent.com/
[1] https://github.com/cilium/ebpf/blob/v0.9.0/rlimit/rlimit.go#L39
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220610112648.29695-2-quentin@isovalent.com
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_map_type_str function instead of maintaining its own string
representation for the bpf_map_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-7-deso@posteo.net
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_prog_type_str function instead of maintaining its own string
representation for the bpf_prog_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-4-deso@posteo.net
|
|
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now.
libbpf_set_strict_mode always return 0, so we don't need to check whether
the return value is 0 or not.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-4-laoar.shao@gmail.com
|
|
If there is no btf_id or frozen, it will not show the pids, but the pids don't
depend on any one of them.
Below is the result after this change:
$ ./bpftool map show
2: lpm_trie flags 0x1
key 8B value 8B max_entries 1 memlock 4096B
pids systemd(1)
3: lpm_trie flags 0x1
key 20B value 8B max_entries 1 memlock 4096B
pids systemd(1)
While before this change, the 'pids systemd(1)' can't be displayed.
Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320060815.7716-1-laoar.shao@gmail.com
|
|
If a BPF map is created over 2^32 the memlock value as displayed in JSON
format will be incorrect. Use atoll instead of atoi so that the correct
number is displayed.
```
$ bpftool map create /sys/fs/bpf/test_bpfmap type hash key 4 \
value 1024 entries 4194304 name test_bpfmap
$ bpftool map list
1: hash name test_bpfmap flags 0x0
key 4B value 1024B max_entries 4194304 memlock 4328521728B
$ sudo bpftool map list -j | jq .[].bytes_memlock
33554432
```
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b6601087-0b11-33cc-904a-1133d1500a10@cloudflare.com
|
|
The commit e5043894b21f ("bpftool: Use libbpf_get_error() to check error")
fails to dump map without BTF loaded in pretty mode (-p option).
Fixing this by making sure get_map_kv_btf won't fail in case there's
no BTF available for the map.
Fixes: e5043894b21f ("bpftool: Use libbpf_get_error() to check error")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220216092102.125448-1-jolsa@kernel.org
|
|
When reworking btf__get_from_id() in commit a19f93cfafdf the error
handling when calling bpf_btf_get_fd_by_id() changed. Before the rework
if bpf_btf_get_fd_by_id() failed the error would not be propagated to
callers of btf__get_from_id(), after the rework it is. This lead to a
change in behavior in print_key_value() that now prints an error when
trying to lookup keys in maps with no btf available.
Fix this by following the way used in dumping maps to allow to look up
keys in no-btf maps, by which it decides whether and where to get the
btf info according to the btf value type.
Fixes: a19f93cfafdf ("libbpf: Add internal helper to load BTF data by FD")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1644249625-22479-1-git-send-email-yinjun.zhang@corigine.com
|
|
hashmap__new() encodes errors with ERR_PTR(), hence it's not valid to
check the returned pointer against NULL and IS_ERR() has to be used
instead.
libbpf_get_error() can't be used in this case as hashmap__new() is not
part of the public libbpf API and it'll continue using ERR_PTR() after
libbpf 1.0.
Fixes: 8f184732b60b ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Fixes: 2828d0d75b73 ("bpftool: Switch to libbpf's hashmap for programs/maps in BTF listing")
Fixes: d6699f8e0f83 ("bpftool: Switch to libbpf's hashmap for PIDs/names references")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220107152620.192327-2-mauricio@kinvolk.io
|
|
Switch to bpf_map_create() API instead.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211201232824.3166325-4-andrii@kernel.org
|
|
Currently, LIBBPF_STRICT_ALL mode is enabled by default for
bpftool which means on error cases, some libbpf APIs would
return NULL pointers. This makes IS_ERR check failed to detect
such cases and result in segfault error. Use libbpf_get_error()
instead like we do in libbpf itself.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211115012436.3143318-1-hengqi.chen@gmail.com
|
|
To support the different BPF map or attach types, bpftool must remain
up-to-date with the types supported by the kernel. Let's update the
lists, by adding the missing Bloom filter map type and the perf_event
attach type.
Both missing items were found with test_bpftool_synctypes.py.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-6-quentin@isovalent.com
|
|
In order to show PIDs and names for processes holding references to BPF
programs, maps, links, or BTF objects, bpftool creates hash maps to
store all relevant information. This commit is part of a set that
transitions from the kernel's hash map implementation to the one coming
with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This is the third and final step of the transition, in which we convert
the hash maps used for storing the information about the processes
holding references to BPF objects (programs, maps, links, BTF), and at
last we drop the inclusion of tools/include/linux/hashtable.h.
Note: Checkpatch complains about the use of __weak declarations, and the
missing empty lines after the bunch of empty function declarations when
compiling without the BPF skeletons (none of these were introduced in
this patch). We want to keep things as they are, and the reports should
be safe to ignore.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-6-quentin@isovalent.com
|
|
In order to show pinned paths for BPF programs, maps, or links when
listing them with the "-f" option, bpftool creates hash maps to store
all relevant paths under the bpffs. So far, it would rely on the
kernel implementation (from tools/include/linux/hashtable.h).
We can make bpftool rely on libbpf's implementation instead. The
motivation is to make bpftool less dependent of kernel headers, to ease
the path to a potential out-of-tree mirror, like libbpf has.
This commit is the first step of the conversion: the hash maps for
pinned paths for programs, maps, and links are converted to libbpf's
hashmap.{c,h}. Other hash maps used for the PIDs of process holding
references to BPF objects are left unchanged for now. On the build side,
this requires adding a dependency to a second header internal to libbpf,
and making it a dependency for the bootstrap bpftool version as well.
The rest of the changes are a rather straightforward conversion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-4-quentin@isovalent.com
|
|
BPF programs, maps, and links, can all be listed with their pinned paths
by bpftool, when the "-f" option is provided. To do so, bpftool builds
hash maps containing all pinned paths for each kind of objects.
These three hash maps are always initialised in main.c, and exposed
through main.h. There appear to be no particular reason to do so: we can
just as well make them static to the files that need them (prog.c,
map.c, and link.c respectively), and initialise them only when we want
to show objects and the "-f" switch is provided.
This may prevent unnecessary memory allocations if the implementation of
the hash maps was to change in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-3-quentin@isovalent.com
|
|
All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.
The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.
Let's update the lists:
- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
formatting for the other man pages. This is for consistency, and also
because it will be helpful in a future patch to automatically check
that the files are synchronised.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com
|
|
Replace the calls to function btf__get_from_id(), which we plan to
deprecate before the library reaches v1.0, with calls to
btf__load_from_kernel_by_id() in tools/ (bpftool, perf, selftests).
Update the surrounding code accordingly (instead of passing a pointer to
the btf struct, get it as a return value from the function).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-6-quentin@isovalent.com
|
|
Somehow when bpftool is compiled in -Og mode, compiler produces new warnings
about possibly uninitialized variables. Fix all the reported problems.
Fixes: 2119f2189df1 ("bpftool: add C output format option to btf dump subcommand")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-3-andrii@kernel.org
|
|
Updates the binary to handle the BPF_MAP_TYPE_TASK_STORAGE as
"task_storage" for printing and parsing. Also updates the documentation
and bash completion
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-5-kpsingh@chromium.org
|
|
There is no support for creating maps of types array-of-map or
hash-of-map in bpftool. This is because the kernel needs an inner_map_fd
to collect metadata on the inner maps to be supported by the new map,
but bpftool does not provide a way to pass this file descriptor.
Add a new optional "inner_map" keyword that can be used to pass a
reference to a map, retrieve a fd to that map, and pass it as the
inner_map_fd.
Add related documentation and bash completion. Note that we can
reference the inner map by its name, meaning we can have several times
the keyword "name" with different meanings (mandatory outer map name,
and possibly a name to use to find the inner_map_fd). The bash
completion will offer it just once, and will not suggest "name" on the
following command:
# bpftool map create /sys/fs/bpf/my_outer_map type hash_of_maps \
inner_map name my_inner_map [TAB]
Fixing that specific case seems too convoluted. Completion will work as
expected, however, if the outer map name comes first and the "inner_map
name ..." is passed second.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200910102652.10509-4-quentin@isovalent.com
|
|
When dumping outer maps or prog_array maps, and on lookup failure,
bpftool simply skips the entry with no error message. This is because
the kernel returns non-zero when no value is found for the provided key,
which frequently happen for those maps if they have not been filled.
When such a case occurs, errno is set to ENOENT. It seems unlikely we
could receive other error codes at this stage (we successfully retrieved
map info just before), but to be on the safe side, let's skip the entry
only if errno was ENOENT, and not for the other errors.
v3: New patch
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200910102652.10509-3-quentin@isovalent.com
|
|
The function used to dump a map entry in bpftool is a bit difficult to
follow, as a consequence to earlier refactorings. There is a variable
("num_elems") which does not appear to be necessary, and the error
handling would look cleaner if moved to its own function. Let's clean it
up. No functional change.
v2:
- v1 was erroneously removing the check on fd maps in an attempt to get
support for outer map dumps. This is already working. Instead, v2
focuses on cleaning up the dump_map_elem() function, to avoid
similar confusion in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200910102652.10509-2-quentin@isovalent.com
|
|
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define prog_type_name in prog.c instead of main.h so it is only defined
once. This leads to a slight decrease in the binary size of bpftool.
Before:
text data bss dec hex filename
401032 11936 1573160 1986128 1e4e50 bpftool
After:
text data bss dec hex filename
399024 11168 1573160 1983352 1e4378 bpftool
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200624143124.12914-1-tklauser@distanz.ch
|
|
|
|
Add bpf_iter-based way to find all the processes that hold open FDs against
BPF object (map, prog, link, btf). bpftool always attempts to discover this,
but will silently give up if kernel doesn't yet support bpf_iter BPF programs.
Process name and PID are emitted for each process (task group).
Sample output for each of 4 BPF objects:
$ sudo ./bpftool prog show
2694: cgroup_device tag 8c42dee26e8cd4c2 gpl
loaded_at 2020-06-16T15:34:32-0700 uid 0
xlated 648B jited 409B memlock 4096B
pids systemd(1)
2907: cgroup_skb name egress tag 9ad187367cf2b9e8 gpl
loaded_at 2020-06-16T18:06:54-0700 uid 0
xlated 48B jited 59B memlock 4096B map_ids 2436
btf_id 1202
pids test_progs(2238417), test_progs(2238445)
$ sudo ./bpftool map show
2436: array name test_cgr.bss flags 0x400
key 4B value 8B max_entries 1 memlock 8192B
btf_id 1202
pids test_progs(2238417), test_progs(2238445)
2445: array name pid_iter.rodata flags 0x480
key 4B value 4B max_entries 1 memlock 8192B
btf_id 1214 frozen
pids bpftool(2239612)
$ sudo ./bpftool link show
61: cgroup prog 2908
cgroup_id 375301 attach_type egress
pids test_progs(2238417), test_progs(2238445)
62: cgroup prog 2908
cgroup_id 375344 attach_type egress
pids test_progs(2238417), test_progs(2238445)
$ sudo ./bpftool btf show
1202: size 1527B prog_ids 2908,2907 map_ids 2436
pids test_progs(2238417), test_progs(2238445)
1242: size 34684B
pids bpftool(2258892)
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-9-andriin@fb.com
|
|
Move functions that parse map and prog by id/tag/name/etc outside of
map.c/prog.c, respectively. These functions are used outside of those files
and are generic enough to be in common. This also makes heavy-weight map.c and
prog.c more decoupled from the rest of bpftool files and facilitates more
lightweight bootstrap bpftool variant.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-5-andriin@fb.com
|
|
Commit c34a06c56df7 ("tools/bpftool: Add ringbuf map to a list of known
map types") added the symbolic "ringbuf" name. Document it in the bpftool
map command docs and usage as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
|
|
Add symbolic name "ringbuf" to map to BPF_MAP_TYPE_RINGBUF. Without this,
users will see "type 27" instead of "ringbuf" in `map show` output.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200615225355.366256-1-andriin@fb.com
|
|
This is a clean-up for the formatting of the do_help functions for
bpftool's subcommands. The following fixes are included:
- Do not use argv[-2] for "iter" help message, as the help is shown by
default if no "iter" action is selected, resulting in messages looking
like "./bpftool bpftool pin...".
- Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool
link".
- Andrii used argument indexing to avoid having multiple occurrences of
bin_name and argv[-2] in the fprintf() for the help message, for
"bpftool gen" and "bpftool link". Let's reuse this for all other help
functions. We can remove up to thirty arguments for the "bpftool map"
help message.
- Harmonise all functions, e.g. use ending quotes-comma on a separate
line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Bring minor improvements to bpftool documentation. Fix or harmonise
formatting, update map types (including in interactive help), improve
description for "map create", fix a build warning due to a missing line
after the double-colon for the "bpftool prog profile" example,
complete/harmonise/sort the list of related bpftool man pages in
footers.
v2:
- Remove (instead of changing) mark-up on "value" in bpftool-map.rst,
when it does not refer to something passed on the command line.
- Fix an additional typo ("hexadeximal") in the same file.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-3-quentin@isovalent.com
|
|
Documentation and interactive help for bpftool have always explained
that the regular handles for programs (id|name|tag|pinned) and maps
(id|name|pinned) can be passed to the utility when attempting to pin
objects (bpftool prog pin PROG / bpftool map pin MAP).
THIS IS A LIE!! The tool actually accepts only ids, as the parsing is
done in do_pin_any() in common.c instead of reusing the parsing
functions that have long been generic for program and map handles.
Instead of fixing the doc, fix the code. It is trivial to reuse the
generic parsing, and to simplify do_pin_any() in the process.
Do not accept to pin multiple objects at the same time with
prog_parse_fds() or map_parse_fds() (this would require a more complex
syntax for passing multiple sysfs paths and validating that they
correspond to the number of e.g. programs we find for a given name or
tag).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-2-quentin@isovalent.com
|
|
Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560684.1683545.4765181397974997027.stgit@toke.dk
|
|
This patch makes bpftool support dumping a map's value properly
when the map's value type is a type of the running kernel's btf.
(i.e. map_info.btf_vmlinux_value_type_id is set instead of
map_info.btf_value_type_id). The first usecase is for the
BPF_MAP_TYPE_STRUCT_OPS.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230044.1103008-1-kafai@fb.com
|
|
This patch adds BPF_MAP_TYPE_STRUCT_OPS to "struct_ops" name mapping
so that "bpftool map show" can print the "struct_ops" map type
properly.
[root@arch-fb-vm1 bpf]# ~/devshare/fb-kernel/linux/tools/bpf/bpftool/bpftool map show id 8
8: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 7
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230037.1102674-1-kafai@fb.com
|
|
The btf availability check is only done for plain text output.
It causes the whole BTF output went missing when json_output
is used.
This patch simplifies the logic a little by avoiding passing "int btf" to
map_dump().
For plain text output, the btf_wtr is only created when the map has
BTF (i.e. info->btf_id != 0). The nullness of "json_writer_t *wtr"
in map_dump() alone can decide if dumping BTF output is needed.
As long as wtr is not NULL, map_dump() will print out the BTF-described
data whenever a map has BTF available (i.e. info->btf_id != 0)
regardless of json or plain-text output.
In do_dump(), the "int btf" is also renamed to "int do_plain_btf".
Fixes: 99f9863a0c45 ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230025.1101828-1-kafai@fb.com
|
|
When testing a map has btf or not, maps_have_btf() tests it by actually
getting a btf_fd from sys_bpf(BPF_BTF_GET_FD_BY_ID). However, it
forgot to btf__free() it.
In maps_have_btf() stage, there is no need to test it by really
calling sys_bpf(BPF_BTF_GET_FD_BY_ID). Testing non zero
info.btf_id is good enough.
Also, the err_close case is unnecessary, and also causes double
close() because the calling func do_dump() will close() all fds again.
Fixes: 99f9863a0c45 ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230019.1101352-1-kafai@fb.com
|
|
This patch implements lookup by name for maps and changes the behavior of
lookups by tag to be consistent with prog subcommands. Similarly to
program subcommands, the show and dump commands will return all maps with
the given name (or tag), whereas other commands will error out if several
maps have the same name (resp. tag).
When a map has BTF info, it is dumped in JSON with available BTF info.
This patch requires that all matched maps have BTF info before switching
the output format to JSON.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/8de1c9f273860b3ea1680502928f4da2336b853e.1576263640.git.paul.chaignon@gmail.com
|
|
Add a new subcommand to freeze maps from user space.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
