summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2021-08-14ALSA: hda: Suspend codec at shutdownTakashi Iwai3-7/+17
So far we have a few workarounds at shutdown for each codec, e.g. turning off the display power and setting the codec to D3. But all those are basically a part of the suspend procedure. Moreover, the streams are still active after that call, hence it might hit the update on the codec that has been already put to D3. In this patch, instead of calling each reboot_notify callback, simply put the codec into the runtime-suspended state after the manual suspend of all PCM streams. It makes the code and the behavior more consistent. The reboot_notify callback is no longer used after this patch, and will be cleaned up later. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-14ALSA: hda: conexant: Turn off EAPD at suspend, tooTakashi Iwai1-1/+15
Conexant codecs have a workaround for the noise at shutdown to turn off EAPD, but it wasn't applied at suspend. In the later patch, we'll switch from reboot_notify callback to the general suspend-at-shutdown, so let's apply the workaround to the suspend case, too. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210813081230.4268-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-14ALSA: pcm: Add SNDRV_PCM_INFO_EXPLICIT_SYNC flagTakashi Iwai1-0/+9
ALSA PCM core has an optimized way to communicate with user-space for its control and status data via mmap on the supported architectures like x86. Depending on the situation, however, we'd rather want to enforce user-space notifying the applptr or hwptr change explicitly via ioctl. For example, the upcoming non-contig and non-coherent buffer handling would need an explicit sync, and this needs to catch the applptr and hwptr changes. Also, ASoC SOF driver will have the SPIB support that has the similar requirement for the explicit control of the applptr and hwptr. This patch adds the new PCM hardware info flag, SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core disables both the control and the status mmap, which enforces user-space to update via SYNC_PTR ioctl. In that way, drivers can catch the applptr and hwptr update and apply the sync operation if needed. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-14ALSA: usb-audio: Input source control - digidesign mboxDamien Zammit1-62/+203
This adds a second mixer control to Digidesign Mbox to select between Analog/SPDIF capture. Users will note that selecting the SPDIF input source automatically switches the clock mode to sync to SPDIF, which is a feature of the hardware. (You can change the clock source back to internal if you want to capture from spdif but not sync to its clock although this mode is probably not recommended). Unfortunately, starting the stream resets both modes to Internally clocked and Analog input mode. Signed-off-by: Damien Zammit <damien@zamaudio.com> Tested-by: Damien Zammit <damien@zamaudio.com> Link: https://lore.kernel.org/r/20210813113402.11849-1-damien@zamaudio.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-13ALSA: memalloc: Count continuous pages in vmalloc buffer handlerTakashi Iwai1-7/+21
This is an enhancement for the SG-style page handling in vmalloc buffer handler to calculate the continuous pages. When snd_sgbuf_get_chunk_size() is called for a vmalloc buffer, currently we return only the size that fits into a single page. However, this API call is rather supposed for obtaining the continuous pages and most of vmalloc or noncontig buffers do have lots of continuous pages indeed. So, in this patch, the callback now calculates the possibly continuous pages up to the given size limit. Note that the end address in the function is calculated from the last byte, hence it's one byte shorter. This is because ofs + size can be above the actual buffer size boundary. Until now, this feature isn't really used, but it'll become useful in a later patch that adds the non-contiguous buffer type that shares the same callback function as vmalloc. Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de Link: https://lore.kernel.org/r/20210813081645.4680-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-13ALSA: hda/cs8409: Prevent pops and clicks during suspendStefan Binding1-0/+6
Some of the register values set for type detection cause pops during suspend, ensure these are cleaned up after type detection completes, as well ensuring that these are cleared when we suspend. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-13ALSA: core: control_led: use strscpy instead of strlcpyPierre-Louis Bossart1-1/+1
strlcpy is deprecated, use its safe replacement Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210812225904.171529-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Unmute/Mute codec when stream starts/stopsStefan Binding3-30/+120
Codec is muted on init, and then unmuted when the stream starts. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-28-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Follow correct CS42L42 power down sequence for suspendStefan Binding2-1/+24
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-27-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Remove unnecessary delaysStefan Binding1-8/+4
Since delays when starting jack detection after initialization have been reduced/removed, it is necessary to add back in an extra 20ms delay after the init sequence to allow the CS42L42 to power up correctly. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-26-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Use timeout rather than retries for I2C transaction waitsStefan Binding2-13/+5
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-25-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Set fixed sample rate of 48kHz for CS42L42Stefan Binding3-0/+16
CS42L42 is configured to use a fixed sample rate of 48kHz. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-24-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Enable Full Scale Volume for Line Out Codec on DolphinStefan Binding1-2/+2
Headphones codec will keep reduced maximum volume. Line Out codec will have increased maximum volume. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-23-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Add support for dolphinLucas Tanure3-0/+440
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs. Codec 1 supports Headphone and Headset Mic. Codec 2 supports Line Out. Features: - Front and Read Jacks appear as separate jacks; Removal or connection of on jack should not affect the connection of the other. - Front Jack only shows up on jack detection. - Rear Jack is Phantom Jack. - Separate Volume Controls for each Jack Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-22-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Add Support to disable jack type detection for CS42L42Stefan Binding3-31/+43
Some hardware configurations do not support jack type detection. Instead, for those configurations, only tip detection is supported. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-21-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Support multiple sub_codecs for Suspend/Resume/Unsol eventsStefan Binding1-13/+28
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-20-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Move codec properties to its own structLucas Tanure3-250/+284
To accommodate move, cs42l42_resume has been added to mirror the existing function cs42l42_suspend. Function cs42l42_reset is no longer required, since cs42l42_resume and cs42l42_suspend perform the same operations. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-19-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Separate CS8409, CS42L42 and project functionsLucas Tanure3-180/+195
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-18-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Support i2c bulk read/write functionsLucas Tanure3-83/+136
This allows mutex locks to be moved into i2c functions, as the bulk read/write functions can lock/unlock themselves to prevent interruption of sequence reads/writes. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-17-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Avoid re-setting the same page as the last accessLucas Tanure2-55/+71
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-16-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Avoid setting the same I2C address for every accessLucas Tanure2-2/+18
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-15-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Dont disable I2C clock between consecutive accessesLucas Tanure2-18/+74
Only disable I2C clock 25 ms after not being used. The current implementation enables and disables the I2C clock for each I2C transaction. Each enable/disable call requires two verb transactions. This means each I2C transaction requires a total of four verb transactions to enable and disable the clock. However, if there are multiple consecutive I2C transactions, it is not necessary to enable and disable the clock each time, instead it is more efficient to enable the clock for the first transaction, and disable it after the final transaction, which would improve performance. This is achieved by using a timeout which disables the clock if no request to enable the clock has occurred for 25 ms. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-14-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Generalize volume controlsLucas Tanure3-124/+105
Use amp offsets as indexes for saved volumes. Remove dependencies on NID inside volume control functions. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-13-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Prevent I2C access during suspend timeLucas Tanure2-0/+15
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-12-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Simplify CS42L42 jack detect.Stefan Binding1-7/+14
Cleanup interrupt masks. Remove unnecessary read/writes. Ensure Tip Sense/Type Detection interrupts are enabled/disabled when needed. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-11-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Mask CS42L42 wake eventsStefan Binding1-2/+2
Wake events are not needed for jack detect. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-10-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Disable unsolicited response for the first bootLucas Tanure1-3/+2
The subsequence suspend and remuse have their enable/disable unsolicited responses at the correct place already Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-9-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Disable unsolicited responses during suspendStefan Binding1-12/+14
Ensure unsolicited responses cannot occur whilst the sub codecs are being disabled. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-8-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Disable unnecessary Ring Sense for Cyborg/Warlock/BullseyeStefan Binding1-3/+1
Also remove unnecessary repeated register writes. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-7-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Reduce HS pops/clicks for CyborgStefan Binding1-2/+8
Enable HSBIAS_SENSE_EN for Cyborg during jack detect to reduce pops and clicks. Do not enable this for Warlock/Bullseye, as it causes ESD issues. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-6-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Mask all CS42L42 interrupts on initializationStefan Binding1-0/+12
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-5-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Use enums for register names and coefficientsStefan Binding3-109/+343
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-4-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Move arrays of configuration to a new fileLucas Tanure4-218/+241
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-3-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cirrus: Move CS8409 HDA bridge to separate moduleLucas Tanure5-1074/+1163
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-2-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09ALSA: msnd: Use proper mmap methodTakashi Iwai1-2/+6
The old ISA MSND driver basically maps the iomem as the DMA buffer. For this type of buffer, we have already the standard mmap helper, snd_pcm_lib_mmap_iomem(). Correct the PCM info, set the DMA address and use the standard helper for handling the mmap on all architectures properly. Link: https://lore.kernel.org/r/20210809140532.11006-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09ALSA: pci: cs46xx: Fix set up buffer type properlyTakashi Iwai1-22/+8
CS46xx driver switches the buffer depending on the number of periods, and in some cases it switches to the own buffer without updating the buffer type properly. This may cause a problem with the mmap on exotic architectures that require the own mmap call for the coherent DMA buffer. This patch addresses the potential breakage by replacing the buffer setup with the proper macro. It also simplifies the source code, too. Link: https://lore.kernel.org/r/20210809071829.22238-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09ALSA: pci: rme: Set up buffer type properlyTakashi Iwai2-8/+4
Although the regression of the mmap was fixed in the recent commit dc0dc8a73e8e ("ALSA: pcm: Fix mmap breakage without explicit buffer setup"), RME9652 and HDSP drivers have still potential issues with their mmap handling. Namely, they use the default mmap handler without the standard buffer preallocation, and PCM core wouldn't use the coherent DMA mapping. It's practically OK on x86, but on some exotic architectures, it wouldn't work. This patch addresses the potential breakage by replacing the buffer setup with the proper macro. It also simplifies the source code, too. Link: https://lore.kernel.org/r/20210809071829.22238-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09ALSA: pcm: Check mmap capability of runtime dma buffer at firstTakashi Iwai1-2/+7
Currently we check only the substream->dma_buffer as the preset of the buffer configuration for verifying the availability of mmap. But a few drivers rather set up the buffer in the own way without the standard buffer preallocation using substream->dma_buffer, and they miss the proper checks. (Now it's working more or less fine as most of them are running only on x86). Actually, they may set up the runtime dma_buffer (referred via snd_pcm_get_dma_buf()) at the open callback, though. That is, this could have been used as the primary source. This patch changes the hw_support_mmap() function to check the runtime dma buffer at first. It's usually NULL with the standard buffer preallocation, and in that case, we continue checking substream->dma_buffer as fallback. Link: https://lore.kernel.org/r/20210809071829.22238-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09ALSA: harmony: Drop superfluous address setupTakashi Iwai1-14/+0
Harmony driver never uses CONTINUOUS buffer type any longer, hence the code setting the address is superfluous. Moreover, the recent change in the ALSA core already covered the missing address field; it's already set up. So let's drop the superfluous line, which includes the full hw_params callback. Link: https://lore.kernel.org/r/20210809071250.21846-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-09Merge branch 'for-linus' into for-nextTakashi Iwai27-149/+230
2021-08-09ALSA: pcm: Fix mmap breakage without explicit buffer setupTakashi Iwai1-1/+4
The recent fix c4824ae7db41 ("ALSA: pcm: Fix mmap capability check") restricts the mmap capability only to the drivers that properly set up the buffers, but it caused a regression for a few drivers that manage the buffer on its own way. For those with UNKNOWN buffer type (i.e. the uninitialized / unused substream->dma_buffer), just assume that the driver handles the mmap properly and blindly trust the hardware info bit. Fixes: c4824ae7db41 ("ALSA: pcm: Fix mmap capability check") Reported-and-tested-by: Jeff Woods <jwoods@fnordco.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5him0gpghv.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-08ALSA: memalloc: Fix mmap of SG-buffer with WC pagesTakashi Iwai1-0/+9
The code refactoring to move the WC page handling into the common memalloc layer caused a breakage for HD-audio HDMI. I overlooked that the driver is using the SG-buffer, which isn't covered by the patch. This patch adds the mmap workaround for WC pages to SG-buffer handler. A caveat is that it falls back to the default handler by returning an error after setting the pgprot, so it won't work in all cases but merely for PCM (which is currently the only use case). Fixes: 623c10108338 ("ALSA: memalloc: Fix pgprot for WC mmap on x86") Reported-and-tested-by: Andy Lavr <andy.lavr@gmail.com> Link: https://lore.kernel.org/r/20210808080034.20337-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-07ALSA: hda: Add quirk for ASUS Flow x13Luke D Jones1-0/+1
The ASUS GV301QH sound appears to work well with the quirk for ALC294_FIXUP_ASUS_DUAL_SPK. Signed-off-by: Luke D Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210807025805.27321-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-06Merge tag 'asoc-fix-v5.14-rc4' of ↵Takashi Iwai24-136/+198
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.14 Quite a lot of fixes here, the biggest set being for the cs42l42 driver which is reasonably old but has seen a sudden uptick in activity. There's also some fixes for correctly referencing PCM buffer addresses and the removal of some driver-local bodges that had been done for the lack of prefix handling in DAPM which were broken by the core handling that as expected.
2021-08-05ASoC: cs42l42: Fix mono playbackRichard Fitzgerald2-2/+15
I2S always has two LRCLK phases and both CH1 and CH2 of the RX must be enabled (corresponding to the low and high phases of LRCLK.) The selection of the valid data channels is done by setting the DAC CHA_SEL and CHB_SEL. CHA_SEL is always the first (left) channel, CHB_SEL depends on the number of active channels. Previously for mono ASP CH2 was not enabled, the result was playing mono data would not produce any audio output. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 621d65f3b868 ("ASoC: cs42l42: Provide finer control on playback path") Link: https://lore.kernel.org/r/20210805161111.10410-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05ASoC: cs42l42: Constrain sample rate to prevent illegal SCLKRichard Fitzgerald1-1/+20
The lowest valid SCLK corresponds to 44.1 kHz at 16-bit. Sample rates less than this would produce SCLK below the minimum when using a normal I2S frame. A constraint must be applied to prevent this. The constraint is not applied if the machine driver sets SCLK, to allow setups where the host generates additional bits per LRCLK phase to increase the SCLK frequency. In these cases the machine driver would always have to inform this driver of the actual SCLK, and it must select a legal SCLK. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210805161111.10410-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05ASoC: cs42l42: Fix LRCLK frame start edgeRichard Fitzgerald1-9/+12
An I2S frame starts on the falling edge of LRCLK so ASP_STP must be 0. At the same time, move other format settings in the same register from cs42l42_pll_config() to cs42l42_set_dai_fmt() where you'd expect to find them, and merge into a single write. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20210805161111.10410-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05ASoC: cs42l42: PLL must be running when changing MCLK_SRC_SELRichard Fitzgerald2-7/+19
Both SCLK and PLL clocks must be running to drive the glitch-free mux behind MCLK_SRC_SEL and complete the switchover. This patch moves the writing of MCLK_SRC_SEL to when the PLL is started and stopped, so that it only transitions while the PLL is running. The unconditional write MCLK_SRC_SEL=0 in cs42l42_mute_stream() is safe because if the PLL is not running MCLK_SRC_SEL is already 0. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 43fc357199f9 ("ASoC: cs42l42: Set clock source for both ways of stream") Link: https://lore.kernel.org/r/20210805161111.10410-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05ALSA: es1688: Avoid devres management for es1688 object creationTakashi Iwai1-9/+20
The recent refactoring of es1688 object creation with the use of devres caused a problem with the non-PnP probe of GUS driver, as it tries to probe multiple times with different parameters That is, this object needs the immediate resource release and the devres doesn't fit for it. This patch reverts partially the commit for restoring the classic resource management for es1688 object. Fixes: 1bb11c1c7f6e ("ALSA: es1688: Allocate resources with device-managed APIs") Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/r/20210805032513.GA30485@xsang-OptiPlex-9020 Link: https://lore.kernel.org/r/20210805062148.30951-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-05ALSA: pci/korg1212: completely remove 'set but not used' warningsPierre-Louis Bossart1-1/+1
Commit 6cdc01ebdfb0 ("ALSA: pci/korg1212: remove 'set but not used' warnings") missed one __maybe_unused, add to enable make W=1 sound/ compilation with x86_64 allmodconfig Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210804185442.274057-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-21 10:01:00 +0300