| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tested with 4.19.9.
v2: Changed from CXT_FIXUP_MUTE_LED_GPIO to CXT_FIXUP_HP_DOCK because
that's what the existing fixups for EliteBooks use.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As a result of investigation for Fireface 800, 'struct snd_ff_spec.regs'
is just for higher address to receive tx asynchronous packets of MIDI
messages, thus it can be simplified.
This commit simplifies it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit adds a functionality to multiplex PCM frames into isochronous
packets and demultiplex PCM frames from isochronous packets for ALSA PCM
applications.
Fireface 800 voluntarily maintains resources for tx isochronous
communication. It performs reservation of isochronous channel and
allocation/update of bandwidth in some cases below:
- at a first request to allocation after bus resets
- at requests to allocation when further bandwidth is required
When request is grant and the unit is prepared, read data from
0x0000801c0008 represents isochronous channel for tx stream, then
the unit can handle requests to start communication. If driver
send the request without checking the register, the unit takes
panic to continue bus resets. The unit starts transmission of
tx packets after receiving several rx packets from driver.
I note that the unit can process tx/rx packets and generate/record
sound regardless of HOST LED.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The way to maintain isochronous resources on bus is different between
Fireface 400/800.
This commit is a preparation. This commit moves a function to allocate resource to
model-dependent implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fireface 400/800 use three modes against the number of data channels in
data block for both tx/rx packets.
This commit adds refactoring for it. Some enumerators are added to
represent each of mode and a function is added to calculate the mode
from sampling frequency code (sfc).
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Both of Fireface 400/800 have the same register to switch frame fetching
mode regardless of difference of available number of PCM frames in
rx isochronous packet.
This commit moves a helper function from model-dependent implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
According to my memo at hand and saved records, writing 0x00000001 to
SND_FF_REG_FETCH_PCM_FRAMES disables fetching PCM frames in corresponding
channel, however current implement uses reversed logic. This results in
muted volume in device side during playback.
This commit corrects the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
An initial commit to add tracepoints for packets without CIP headers
uses different print formats for added tracepoints. However this is not
convenient for users/developers to prepare debug tools.
This commit uses the same format for the two tracepoints.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
tracepoint
An initial commit to add tracepoints for packets without CIP headers
introduces a wrong assignment to 'data_blocks' value of
'out_packet_without_header' tracepoint.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In IEC 61883-1/6 engine of ALSA firewire stack, a packet handler has a
second argument for 'the number of bytes in payload of isochronous
packet'. However, an incoming packet handler without CIP header uses the
value as 'the number of quadlets in the payload'. This brings userspace
applications to receive the number of PCM frames as four times against
real time.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 3b196c394dd ('ALSA: firewire-lib: add no-header packet processing')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull Huawei LEDS and hotkey support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some of Huawei laptops come with a LED in the micmute key. This patch
enables the use of micmute LED for these devices:
1. Matebook X (19e5:3200), (19e5:3201)
2. Matebook X Pro (19e5:3204)
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch solves bug 200501 'Only 2 of 4 speakers playing sound.'
It enables the front speakers on Huawei Matebook X Pro laptops.
These laptops come with Dolby Atmos sound system and these pins
configuration enables the front speakers.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200501
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
stream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/core/pcm.c:140 snd_pcm_control_ioctl() warn: potential spectre issue 'pcm->streams' [r] (local cap)
Fix this by sanitizing stream before using it to index pcm->streams
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
info.mode and info.port are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.
These issues were detected with the help of Smatch:
sound/synth/emux/emux_hwdep.c:72 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[i]->ctrls' [w] (local cap)
sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs' [w] (local cap)
sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[info.port]->ctrls' [w] (local cap)
Fix this by sanitizing both info.mode and info.port before using them
to index emu->portptrs[i]->ctrls, emu->portptrs[info.port]->ctrls and
emu->portptrs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull refactoring / fixes of HD-audio PM and display power management
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fireface 800 is a flagship model of RME GmbH for audio and music units
on IEEE 1394 bus, shipped 2004. This model consists of four chips:
- TI TSB81BA3D for physical layer on cable environment of EEE 1394 bus
- TI TSB82AA2 for link layer for 1394 OHCI bus bridge to PCI bus
- Xilinx Spartan-3 FPGA XC3S400
- Xilinx High-Performance CPLD XC9572XL
This commit adds support Fireface 800. In this time, the support is
restricted to its MIDI functionality, thus this commit adds some
condition statements to avoid touching streaming functionality.
Unlike Fireface 400, Fireface 800 has no functionality to suppress
asynchronous transactions for MIDI messages except for unregister of
listen address in controller side, thus the feature is available as is.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Content of asynchronous transaction for MIDI messages differs between
Fireface 400 and 800.
This commit adds a model-specific handler for the transaction and adds
arrangement.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fireface 400 and 800 have the same mechanism to decide address to which
asynchronous transactions are sent for MIDI messages, however they use
different registers for controllers to notify higher 4 byte of the
address.
This commit adds a model-specific parameter to represent the address.
Additionally, it corrects some comments. I note that these two models have
a difference to enable/disable the transaction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As long as investigating packet dumps from Fireface 400/800, a register
to receive asynchronous transactions for MIDI messages is the same. For
Fireface 800, minor register is used.
This commit declares macros for the transactions and obsoletes
model-specific parameters.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Unlike Fireface 400, Fireface 800 have two pair of optical interface
for ADAT signal and S/PDIF signal. ADAT signals for the interface
are handled for sampling clock source separately.
This commit modifies a parser for clock configuration to distinguish
these two ADAT signals.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
source
As long as investigating packet dumps from Fireface 400/800, bits on
status registers for clock synchronization are the same.
This commit moves a parser for a register of clock configuration to
obsolete model-specific operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As long as investigating packet dumps from Fireface 400/800, bits on
status registers for clock synchronization are the same.
This commit moves a parser for the registers to obsolete model-specific
operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As long as investigating packet dumps from Fireface 400/800, status
registers for clock synchronization is common.
This commit moves some macros for them to header file.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When building without CONFIG_PCI, we can (depending on the architecture)
get a link failure:
ERROR: "pci_iounmap" [sound/pci/hda/snd-hda-codec-ca0132.ko] undefined!
Adding a compile-time check for PCI gets it to work correctly on
32-bit ARM.
Fixes: d99501b8575d ("ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've excluded the display_power_control flag for Intel HSW and BDW
codecs as the HD-audio controllers of the corresponding platforms take
care of the display power as well. But the recent refactoring
separates the controller and the codec power accounting, so it's fine
to call the display PM even for HSW/BDW codecs. This is less
confusing since we can avoid this well-hidden condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The display power is in unbalance at removing the driver since it
misses the snd_hdac_display_power(OFF) call.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After the recent refactoring, snd_hdac_display_power() doesn't return
any error, hence it can be defined to return void.
This makes many error checks redundant and allows us to reduce them
gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When an error occurs in azx_probe_continue(), we should release the
display power. However, the current code ignores it and releases the
display power only for HSW/BDW cases. Fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_hdac_display_power() can be called even for a HDA controller
without DRM binding. The same is true for other helpers,
snd_hdac_i915_set_bclk() and snd_hdac_set_codec_wakeup().
So all superfluous AZX_DCAPS_I915_POWERWELL checks in hda_intel.c can
be dropped, and the definition of AZX_DCAPS_I915_POWERWELL itself can
be removed as well. This simplifies the code a lot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting. This patch is a big
surgery for addressing the complexity and the possible unbalance.
Basically the patch changes the display PM in the following ways:
- Both HD-audio controller and codec drivers call a single helper,
snd_hdac_display_power(). (Formerly, the display power control from
a codec was done indirectly via link_power bus ops.)
- snd_hdac_display_power() receives the codec address index. For
turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.
- snd_hdac_display_power() doesn't manage refcounts any longer, but
keeps the power status in bitmap. If any of controller or codecs is
turned on, the function updates the DRM power state via get_power()
or put_power().
Also this refactor allows us more cleanup:
- The link_power bus ops is dropped, so there is no longer indirect
management, as mentioned in the above.
- hdac_device link_power_control flag is moved to hda_codec
display_power_control flag, as it's only for HDA legacy.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge for resolving the conflict of fixup entries added in both
branches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ASUS UX433FN and UX333FA with ALC294 cannot detect the headset MIC
and output through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ASUS UX533FD with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The known ALC256_FIXUP_ASUS_MIC fixup can fix the headphone jack
sensing and enable use of the internal microphone on this laptop
X542UN. However, it's ALC294 so create a new fixup named
ALC294_FIXUP_ASUS_MIC to avoid confusion.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make unified suspend / resume helpers and call them from both the
runtime- and the system-PM callbacks for simplifying code.
There are slight changes of call orders, but there shouldn't be any
functional difference after refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In an initial commit, 'SYNC_STATUS' register is referred to get
clock configuration, however this is wrong, according to my local
note at hand for reverse-engineering about packet dump. It should
be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config()
is correctly programmed.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Users reported a mute LED regression on Lenovo X1 Carbon, the root
cause is we applied the fixup of ALC285_FIXUP_LENOVO_HEADPHONE_NOISE
to this machine, then the machine can't apply the fixup of
ALC269_FIXUP_THINKPAD_ACPI anymore. To fix it, we chain two fixup
together.
Fixes: c4cfcf6f4297 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch will enable headset button for new Chrome platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Extend some structs to add the support for jack button changes.
Now snd_hda_jack_add_kctl() receives two more arguments: the jack type
and the jack keymaps. Both are optional, and when zero are passed,
the function behaves just like before.
For reporting button state changes, you'd need to update
jack->button_state bits accordingly, typically in the jack callback.
Then the value OR'ed with button_state and the jack plug state is
passed to snd_jack_report().
Note that currently the code assumes only the one-shot button events,
i.e. it tries to send the button release soon after sending the button
event. If a driver really supports the button release handling by
itself, we may need to introduce some flag to control this behavior in
future.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For allowing the callee to evaluate the associated jack information
and the unsolicited event data, add the new fields to
hda_jack_callback. They can be used, for example, to retrieve the
headset button state in the callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge for applying the more HD-audio quirks on top of the latest
code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If it plugged headphone or headset into the jack, then
do the reboot, it will have a chance to cause headphone no sound.
It just need to run the headphone mode procedure after boot time.
The issue will be fixed.
It also suitable for ALC234 ALC274 and ALC294.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
A couple of open coded iterating thru the child node names are converted
to use for_each_child_of_node() instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert soundbus uevent and sysfs OF node name and device type usage to
use printf specifier and helper functions instead of directly accessing
the name and type pointers. This will allow the eventual removal of the
pointers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Acer AIO Veriton Z4860G/Z6860G with the same ALC286 codec has issues
with the input from external microphone. The issue can be fixed by
the fixup ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE for Veriton Z4660G.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Acer AIO Veriton Z4660G with ALC286 codec has issue with the input
from external microphones connecting via 'Front Mic' jack. The fixup
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE enables the jack sensing of
the headset and fix the audio input issue of external microphone.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Acer AIO Aspire C24-860 with ALC286 can't detect the headset
microphone. Just like another Acer AIO U27-880, it needs a different
pin value for 0x18 and the headset fixup to make headset mic work.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Acer Aspire U27-880(AIO) with ALC286 codec can not detect headset mic
and internal mic not working either. It needs the similar quirk like
Sony laptops to fix headphone jack sensing and enables use of the
internal microphone.
Unfortunately jack sensing for the headset mic is still not working.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Tegra186 and Tegra194 contain the same codecs as earlier chips and can
be supported using the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
