summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2018-10-18ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFERKuninori Morimoto2-1/+13
[ Upstream commit 6c92d5a2744e27619a8fcc9d74b91ee9f1cdebd1 ] Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18ASoC: rsnd: adg: care clock-frequency sizeKuninori Morimoto1-0/+5
[ Upstream commit 69235ccf491d2e26aefd465c0d3ccd1e3b2a9a9c ] ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = <x y>; /* this is OK */ clock-frequency = <x y z>; /* this is NG */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18ASoC: sigmadsp: safeload should not have lower byte limitDanny Smith1-2/+1
[ Upstream commit 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ] Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit. Signed-off-by: Danny Smith <dannys@axis.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18ASoC: wm8804: Add ACPI supportPierre-Louis Bossart1-1/+14
[ Upstream commit 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ] HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18ASoC: rt5514: Fix the issue of the delay volume applied againOder Chiou1-4/+4
[ Upstream commit 6f0a256253f48095ba2e5bcdfbed41f21643c105 ] After our evaluation, we need to modify the default values to make sure the volume applied immediately. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760Kai-Heng Feng1-0/+1
commit 709ae62e8e6d9ac4df7dadb3b8ae432675c45ef9 upstream. The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIsLiam Girdwood1-0/+7
[ Upstream commit e01b4f624278d5efe5fb5da585ca371947b16680 ] Sometime a component or topology may configure a DAI widget with no private data leading to a dev_dbg() dereferencne of this data. Fix this to check for non NULL private data and let users know if widget is missing DAI. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven RidgeKai-Heng Feng1-1/+2
[ Upstream commit 1adca4b0cd65c14cb8b8c9c257720385869c3d5f ] This patch can make audio controller in AMD Raven Ridge gets runtime suspended to D3, to save ~1W power when it's not in use. Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ALSA: snd-aoa: add of_node_put() in error pathNicholas Mc Guire1-1/+3
[ Upstream commit 222bce5eb88d1af656419db04bcd84b2419fb900 ] Both calls to of_find_node_by_name() and of_get_next_child() return a node pointer with refcount incremented thus it must be explicidly decremented here after the last usage. As we are assured to have a refcounted np either from the initial of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np) in the while loop if we reached the error code path below, an x of_node_put(np) is needed. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: commit f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: oxfw: fix memory leak of private dataTakashi Sakamoto1-0/+1
commit 498fe23aad8e3b5a9554f55719c537603b4476ea upstream. Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: oxfw: fix memory leak of discovered stream formats at error pathTakashi Sakamoto1-0/+7
commit 1064bc685d359f549f91c2d5f111965a9284f328 upstream. After finishing discover of stream formats, ALSA OXFW driver has memory leak of allocated memory object at error path. This commit releases the memory object at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: oxfw: fix memory leak for model-dependent data at error pathTakashi Sakamoto1-0/+2
commit ce925f088b979537f22f9e05eb923ef9822ca139 upstream. After allocating model-dependent data, ALSA OXFW driver has memory leak of the data at error path. This commit releases the data at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: fireworks: fix memory leak of response buffer at error pathTakashi Sakamoto1-0/+2
commit c3b55e2ec9c76e7a0de2a0b1dc851fdc9440385b upstream. After allocating memory object for response buffer, ALSA fireworks driver has leak of the memory object at error path. This commit releases the object at the error path. Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: firewire-tascam: fix memory leak of private dataTakashi Sakamoto1-0/+1
commit 8d28277c065a974873c6781d44b7bcdcd8fb4e8a upstream. Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: firewire-digi00x: fix memory leak of private dataTakashi Sakamoto1-0/+1
commit a49a83ab05e34edd6c71a4fbd062c9a7ba6d18aa upstream. Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()Takashi Sakamoto1-3/+6
commit 36f3a6e02c143a7e9e4e143e416371f67bc1fae6 upstream. An allocated memory forgets to be released. Fixes: 76fdb3a9e13 ('ALSA: fireface: add support for Fireface 400') Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFOWilly Tarreau1-1/+1
commit 49434c6c575d2008c0abbc93e615019f39e01252 upstream. snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: bebob: use address returned by kmalloc() instead of kernel stack for ↵Takashi Sakamoto1-10/+14
streaming DMA mapping commit 493626f2d87a74e6dbea1686499ed6e7e600484e upstream. When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST', an address of 'payload' argument is used for streaming DMA mapping by 'firewire_ohci' module if 'size' argument is larger than 8 byte. Although in this case the address should not be on kernel stack, current implementation of ALSA bebob driver uses data in kernel stack for a cue to boot M-Audio devices. This often brings unexpected result, especially for a case of CONFIG_VMAP_STACK=y. This commit fixes the bug. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021 Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165 Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series') Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error pathTakashi Sakamoto2-4/+2
commit b1fbebd4164b3d170ad916dcd692cf843c9c065d upstream. After allocating model-dependent data for M-Audio FW1814 and ProjectMix I/O, ALSA bebob driver has memory leak at error path. This commit releases the allocated data at the error path. Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ASoC: rsnd: fixup not to call clk_get/set under non-atomicJiada Wang3-6/+28
commit 4d230d12710646788af581ba0155d83ab48b955c upstream. Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ASoC: cs4265: fix MMTLR Data switch controlSébastien Szymanski1-2/+2
commit 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 upstream. The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ASoC: samsung: Fix invalid argument when devm_gpiod_get is calledJaechul Lee1-2/+1
commit 975b6a93088e83a41ba2f0dec2f086678fdb2a7a upstream. devm_gpiod_get is called with GPIOF_OUT_INIT_LOW but the function doesn't allow the parameters. Unluckily, GPIOF_OUT_INIT_LOW is same value as GPIOD_ASIS and gpio direction isn't set properly. Muted stream comes up when I try recording some sounds on TM2. mic-bias gpiod state can't be changed because the gpiod is created with the invalid parameter. The gpio should be set GPIOD_OUT_HIGH. Fixes: 1bfbc260a5b4 ("ASoC: samsung: Add machine driver for Exynos5433 based TM2 board") Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ASoC: samsung: i2s: Fix error handling path in i2s_set_sysclk()Christophe Jaillet1-1/+4
commit 6431a7e36652517df82855ee79c8240001812a55 upstream. If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock. Othewise, there is a resource leak. Fixes: f5c97c7b0438 ("ASoC: samsung: i2s: Handle return value of clk_prepare_enable.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ALSA: pcm: Fix snd_interval_refine first/last with open min/maxTimo Wischer1-4/+10
[ Upstream commit ff2d6acdf6f13d9f8fdcd890844c6d7535ac1f10 ] Without this commit the following intervals [x y), (x y) were be replaced to (y-1 y) by snd_interval_refine_last(). This was also done if y-1 is part of the previous interval. With this changes it will be replaced with [y-1 y) in case of y-1 is part of the previous interval. A similar behavior will be used for snd_interval_refine_first(). This commit adapts the changes for alsa-lib of commit 9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if also excluded before") Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ASoC: rt5514: Fix the issue of the delay volume appliedOder Chiou1-4/+4
[ Upstream commit d96f8bd28cd0bae3e6702ae90df593628ef6906f ] The patch fixes the issue of the delay volume applied. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macroTakashi Iwai1-1/+2
[ Upstream commit bd1cd0eb2ce9141100628d476ead4de485501b29 ] AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ALSA: msnd: Fix the default sample sizesTakashi Iwai1-2/+2
[ Upstream commit 7c500f9ea139d0c9b80fdea5a9c911db3166ea54 ] The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ALSA: hda - Fix cancel_work_sync() stall from jackpoll workTakashi Iwai1-1/+2
commit 16037643969e095509cd8446a3f8e406a6dc3a2c upstream. On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly. As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work. This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: <stable@vger.kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15ASoC: wm8994: Fix missing break in switchGustavo A. R. Silva1-0/+1
commit ad0eaee6195db1db1749dd46b9e6f4466793d178 upstream. Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org [Gustavo: Backported to 3.16..4.18 - Remove code comment removal] Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15ASoC: rt5677: Fix initialization of rt5677_of_match.dataMatthias Kaehlcke1-1/+1
[ Upstream commit f861e3e28a3016a2064d9f600eaa92a530b732b4 ] The driver expects to find the device id in rt5677_of_match.data, however it is currently assigned to rt5677_of_match.type. Fix this. The problem was found with the help of clang: sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to zero treated as a null pointer constant of type 'const void *' [-Wnon-literal-null-conversion] { .compatible = "realtek,rt5677", RT5677 }, ^~~~~~ Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05ASoC: sirf: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-4/+3
commit ae1c696a480c67c45fb23b35162183f72c6be0e1 upstream. There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: 2bd8d1d5cf89 ("ASoC: sirf: Add audio usp interface driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05ASoC: zte: Fix incorrect PCM format bit usagesTakashi Iwai1-2/+2
commit c889a45d229938a94b50aadb819def8bb11a6a54 upstream. zx-tdm driver sets the DAI driver definitions with the format bits wrongly set with SNDRV_PCM_FORMAT_*, instead of SNDRV_PCM_FMTBIT_*. This patch corrects the definitions. Spotted by a sparse warning: sound/soc/zte/zx-tdm.c:363:35: warning: restricted snd_pcm_format_t degrades to integer Fixes: 870e0ddc4345 ("ASoC: zx-tdm: add zte's tdm controller driver") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05ASoC: dpcm: don't merge format from invalid codec daiJerome Brunet1-0/+8
commit 4febced15ac8ddb9cf3e603edb111842e4863d9a upstream. When merging codec formats, dpcm_runtime_base_format() should skip the codecs which are not supporting the current stream direction. At the moment, if a BE link has more than one codec, and only one of these codecs has no capture DAI, it becomes impossible to start a capture stream because the merged format would be 0. Skipping invalid codec DAI solves the problem. Fixes: b073ed4e2126 ("ASoC: soc-pcm: DPCM cares BE format") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ALSA: seq: Fix UBSAN warning at SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT ioctlTakashi Iwai1-1/+2
[ Upstream commit c9a4c63888dbb79ce4d068ca1dd8b05bc3f156b1 ] The kernel may spew a WARNING with UBSAN undefined behavior at handling ALSA sequencer ioctl SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT: UBSAN: Undefined behaviour in sound/core/seq/seq_clientmgr.c:2007:14 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_seq_ioctl_query_next_client+0x1ac/0x1d0 sound/core/seq/seq_clientmgr.c:2007 snd_seq_ioctl+0x264/0x3d0 sound/core/seq/seq_clientmgr.c:2144 .... It happens only when INT_MAX is passed there, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200211 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: vxpocket: Fix invalid endian conversionsTakashi Iwai1-5/+5
commit 3acd3e3bab95ec3622ff98da313290ee823a0f68 upstream. The endian conversions used in vxp_dma_read() and vxp_dma_write() are superfluous and even wrong on big-endian machines, as inw() and outw() already do conversions. Kill them. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: memalloc: Don't exceed over the requested sizeTakashi Iwai1-6/+2
commit dfef01e150824b0e6da750cacda8958188d29aea upstream. snd_dma_alloc_pages_fallback() tries to allocate pages again when the allocation fails with reduced size. But the first try actually *increases* the size to power-of-two, which may give back a larger chunk than the requested size. This confuses the callers, e.g. sgbuf assumes that the size is equal or less, and it may result in a bad loop due to the underflow and eventually lead to Oops. The code of this function seems incorrectly assuming the usage of get_order(). We need to decrease at first, then align to power-of-two. Reported-and-tested-by: he, bo <bo.he@intel.com> Reported-by: zhang jun <jun.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entryHans de Goede1-1/+1
commit 8e82a728792bf66b9f0a29c9d4c4b0630f7b9c79 upstream. I added the subsys product-id for the HDMI HDA device rather then for the PCH one, this commit fixes this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: cs5535audio: Fix invalid endian conversionTakashi Iwai2-5/+5
commit 69756930f2de0457d51db7d505a1e4f40e9fd116 upstream. One place in cs5535audio_build_dma_packets() does an extra conversion via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops, which writes the value via cs_writel(). That is, the callback does the conversion by itself, and we don't need to convert beforehand. This patch fixes that bogus conversion. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: virmidi: Fix too long output trigger loopTakashi Iwai1-0/+10
commit 50e9ffb1996a5d11ff5040a266585bad4ceeca0a upstream. The virmidi output trigger tries to parse the all available bytes and process sequencer events as much as possible. In a normal situation, this is supposed to be relatively short, but a program may give a huge buffer and it'll take a long time in a single spin lock, which may eventually lead to a soft lockup. This patch simply adds a workaround, a cond_resched() call in the loop if applicable. A better solution would be to move the event processor into a work, but let's put a duct-tape quickly at first. Reported-and-tested-by: Dae R. Jeong <threeearcat@gmail.com> Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: vx222: Fix invalid endian conversionsTakashi Iwai1-4/+4
commit fff71a4c050ba46e305d910c837b99ba1728135e upstream. The endian conversions used in vx2_dma_read() and vx2_dma_write() are superfluous and even wrong on big-endian machines, as inl() and outl() already do conversions. Kill them. Spotted by sparse, a warning like: sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types) Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: hda - Turn CX8200 into D3 as well upon rebootPark Ju Hyung1-1/+2
commit d77a4b4a5b0b2ebcbc9840995d91311ef28302ab upstream. As an equivalent codec with CX20724, CX8200 is also subject to the reboot bug. Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims to this issue, causing extremely loud noises upon reboot. Now that we know that this bug is subject to multiple codecs, fix the comment as well. Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecsPark Ju Hyung1-0/+1
commit f59cf9a0551dd954ad8b752461cf19d9789f4b1d upstream. On rare occasions, we are still noticing that the internal speaker spitting out spurious noises even after adding the problematic codec to the list. Adding a 10ms artificial delay before rebooting fixes the issue entirely. Patch for Realtek codecs also adds the same amount of delay after entering D3. Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-17ASoC: Intel: cht_bsw_max98090_ti: Fix jack initializationThierry Escande1-14/+31
commit 3bbda5a38601f7675a214be2044e41d7749e6c7b upstream. If the ts3a227e audio accessory detection hardware is present and its driver probed, the jack needs to be created before enabling jack detection in the ts3a227e driver. With this patch, the jack is instantiated in the max98090 headset init function if the ts3a227e is present. This fixes a null pointer dereference as the jack detection enabling function in the ts3a driver was called before the jack is created. [minor correction to keep error handling on jack creation the same as before by Pierre Bossart] Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-17ASoC: msm8916-wcd-digital: fix RX2 MIX1 and RX3 MIX1Jean-François Têtu1-2/+2
commit f53ee247ad546183fc13739adafc5579b9f0ebc0 upstream. The kcontrol for the third input (rxN_mix1_inp3) of both RX2 and RX3 mixers are not using the correct control register. This simple patch fixes this. Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-17ASoC: rsnd: fix ADG flagsKuninori Morimoto1-2/+2
commit b7165d26bf730567ab081bb9383aff82cd43d9ea upstream. Current ADG driver is over-writing flags. This patch fixes it. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03ASoC: topology: Add missing clock gating parameter when parsing hw_configsKirill Marinushkin1-0/+7
[ Upstream commit 933e1c4a667103c4d10ebdc9505a0a6abd8c3fbd ] Clock gating parameter is a part of `dai_fmt`. It is supported by `alsa-lib` when creating a topology binary file, but ignored by kernel when loading this topology file. After applying this commit, the clock gating parameter is not ignored any more. This solution is backwards compatible. The existing behaviour is not broken, because by default the parameter value is 0 and is ignored. snd_soc_tplg_hw_config.clock_gated = 0 => no effect snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT For example, the following config, based on alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported: ~~~~ SectionHWConfig."CodecHWConfig" { id "1" format "I2S" # physical audio format. pm_gate_clocks "true" # clock can be gated } SectionLink."Codec" { # used for binding to the physical link id "0" hw_configs [ "CodecHWConfig" ] default_hw_conf_id "1" } ~~~~ Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: Pan Xiuli <xiuli.pan@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Cc: linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()Kirill Marinushkin1-5/+7
[ Upstream commit a941e2fab3207cb0d57dc4ec47b1b12c8ea78b84 ] The values of bclk and fsync are inverted WRT the codec. But the existing solution already works for Broadwell, see the alsa-lib config: `alsa-lib/src/conf/topology/broadwell/broadwell.conf` This commit provides the backwards-compatible solution to fix this misuse. Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Cc: linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03ALSA: hda/ca0132: fix build failure when a local macro is definedTakashi Sakamoto1-2/+6
[ Upstream commit 8e142e9e628975b0dddd05cf1b095331dff6e2de ] DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f76804 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by: Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c9782cc6 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03ALSA: usb-audio: Apply rate limit to warning messages in URB complete callbackTakashi Iwai1-1/+1
[ Upstream commit 377a879d9832f4ba69bd6a1fc996bb4181b1e504 ] retire_capture_urb() may print warning messages when the given URB doesn't align, and this may flood the system log easily. Put the rate limit to the message for avoiding it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03ALSA: emu10k1: Rate-limit error messages about page errorsTakashi Iwai1-3/+3
[ Upstream commit 11d42c81036324697d367600bfc16f6dd37636fd ] The error messages at sanity checks of memory pages tend to repeat too many times once when it hits, and without the rate limit, it may flood and become unreadable. Replace such messages with the *_ratelimited() variant. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 09:15:18 +0300