summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2014-05-05ALSA: hda - hdmi: Set converter channel count even without sinkAnssi Hannula1-1/+3
Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: Stephan Raue <stephan@openelec.tv> Tested-by: Stephan Raue <stephan@openelec.tv> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch2-1/+15
The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Fix deadlocks at resumingTakashi Iwai2-2/+6
The recent addition of the USB audio mixer suspend/resume may lead to deadlocks when the driver tries to call usb_autopm_get_interface() recursively, since the function tries to sync with the finish of the other calls. For avoiding it, introduce a flag indicating the resume operation and avoids the recursive usb_autopm_get_interface() calls during the resume. Reported-and-tested-by: Bryan Quigley <gquigs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Save mixer status only once at suspendTakashi Iwai1-2/+3
The suspend callback of usb-audio driver may be called multiple times per suspend when multiple USB interfaces are bound to a single sound card instance. In such a case, it's superfluous to save the mixer values multiple times. This patch fixes it by checking the counter. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while ↵Sander Eikelenboom1-3/+2
DEBUG not defined This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-30ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-29ALSA: hda - Suppress CORBRP clear on Nvidia controller chipsTakashi Iwai3-17/+21
The recent commit (ca460f86521) changed the CORB RP reset procedure to follow the specification with a couple of sanity checks. Unfortunately, Nvidia controller chips seem not following this way, and spew the warning messages like: snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0 This patch adds the workaround for such chips. It just skips the new reset procedure for the known broken chips. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x10280674), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-23Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/jz4740', ↵Mark Brown6-12/+16
'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/tlv320aic3x' into asoc-linus
2014-04-23Merge remote-tracking branches 'asoc/fix/alc5623', 'asoc/fix/cs42l52', ↵Mark Brown4-7/+11
'asoc/fix/cs42l73' and 'asoc/fix/fsl-spdif' into asoc-linus
2014-04-23Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown1-1/+0
2014-04-23ASoC: jz4740: Remove Makefile entry for removed fileLars-Peter Clausen1-2/+0
Commit 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") jz4740-pcm.c file, but neglected to remove the Makefile entries. Fixes: 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: Intel: Fix audio crash due to negative address offsetWenkai Du1-1/+1
There were occasional ADSP crash during reboot testing: [ 11.883364] BUG: unable to handle kernel paging request at ffffc90121700000 [ 11.883380] IP: [<ffffffffc024d8bc>] sst_module_insert_fixed_block+0x24f/0x26d [snd_soc_sst_dsp] [ 11.883397] PGD 7800b067 PUD 0 [ 11.883405] Oops: 0002 [#1] SMP [ 11.886418] gsmi: Log Shutdown Reason 0x03 The virtual address, ffffc90121700000, was out of range. The virtual address is calculated by adding LPE base address with an offset: sst_memcpy32(dsp->addr.lpe + data->offset, data->data, data->size); The offset is calculated in sst_byt_parse_module, by subtraction of two virtual addresses dsp->addr.fw_ext and dsp->addr.lpe: block_data.offset = block->ram_offset + (dsp->addr.fw_ext - dsp->addr.lpe); These virtual addresses are assigned by kernel from ioremap: sst->addr.lpe = ioremap(pdata->lpe_base, pdata->lpe_size); sst->addr.fw_ext = ioremap(pdata->fw_base, pdata->fw_size); In current driver code, offset is defined as unsigned int32: struct sst_module_data { ... u32 offset; /* offset in FW file */ }; Most of the time kernel assigned virtual addresses with addr.fw_ext greater than addr.lpe. But sometimes it was the other way round. Fix the problem by declaring offset as signed int32_t. Signed-off-by: Wenkai Du <wenkai.du@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-21ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrolJarkko Nikula1-1/+0
Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable") is trying to free the widget it allocated by snd_soc_dapm_new_control() call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to dapm_kcontrol_free(). This is causing a widget double free with auto-disabled DAPM kcontrols in sound card unregistration because widgets are already freed before dapm_kcontrol_free() is called. Reason for that is all widgets are added into dapm->card->widgets list in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during execution of snd_soc_dapm_free(). Now snd_soc_dapm_free() calls for different DAPM contexts happens before snd_card_free() call from where the call chain to dapm_kcontrol_free() begins: soc_cleanup_card_resources() soc_remove_dai_links() soc_remove_link_dais() snd_soc_dapm_free(&cpu_dai->dapm) soc_remove_link_components() soc_remove_platform() snd_soc_dapm_free(&platform->dapm) soc_remove_codec() snd_soc_dapm_free(&codec->dapm) snd_soc_dapm_free(&card->dapm) snd_card_free() snd_card_do_free() snd_device_free_all() snd_device_free() snd_ctl_dev_free() snd_ctl_remove() snd_ctl_free_one() dapm_kcontrol_free() This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for them. Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable) Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-04-18ASoC: Intel: Fix incorrect sizeof() in sst_hsw_stream_get_volume()Christian Engelmayer1-1/+2
Fix an incorrect sizeof() usage in sst_hsw_stream_get_volume(). sst_dsp_read() is called to read into a variable of type u32, but is passed sizeof(u32 *) for argument 'size_t bytes'. Detected by Coverity: CID 1195260. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18ASoC: Intel: some incorrect sizeof() usagesDan Carpenter1-2/+2
The intent was to say "sizeof(*pos)" and not "sizeof(pos)". The sizeof(*pos) is 8 bytes so the bug won't show up on 64 bit systems. The sizeof(*dx) is 172 bytes so that will be a bugfix. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18ASoC: cs42l73: Convert to use devm_gpio_request_oneAxel Lin1-2/+4
Current code missed a gpio_free() call in cs42l73_i2c_remove(). Convert to use devm_gpio_request_one() to fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18ASoC: cs42l52: Convert to use devm_gpio_request_oneAxel Lin1-2/+4
Current code missed a gpio_free() call in cs42l52_i2c_remove(). Convert to use devm_gpio_request_one() to fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18ASoC: fsl_spdif: Fix wrong OFFSET of STC_SYSCLK_DIVNicolin Chen1-2/+2
It should use STC_SYSCLK_DIV_OFFSET. Thus fix it. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-16ALSA: hda/realtek - Add headset Mic support for Dell machineKailang Yang1-0/+2
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-16ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-15ASoC: alc5623: Fix regmap endiannessAndrew Lunn1-1/+1
Commit 0cd257bf9b9b0cbb4fa1a5c988a232506997867c, "ASoC: alc5623: Convert to direct regmap API usage" broke probing of the codec, because of wrong endinness of the ID and codec version read from the device. Fix this by removing the existing flipping of the endiannes, and extracting the codec type byte from the word from the regmap. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-15ASoC: tlv320aic3x: fix shared reset pin for DTSebastian Reichel1-2/+7
Currently the second tlv320aic3x instance fails to be probed from DT if the reset pin is shared with the first one. This patch fixes it by moving the list add of the reset pin into the i2c_probe method. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14ALSA: es18xx driver should use udelay errorLi, Zhen-Hua1-5/+5
udelay with more than 20000 may cause __bad_udelay. Use mdelay for instead. [fixed a typo spotted by Clemens -- tiwai] Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-14ALSA: hda/realtek - Add support of ALC288 codecKailang Yang1-0/+2
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-11ASoC: rsnd: fix clock prepare/unprepareBen Dooks2-4/+4
As with the previous commit, before a clock can be used it must be prepared for use. Change from clk_enable() and clk_disable() to the versions of the calls which also prepare and un-prepare the clocks. Will fix warnings from the clock code when this is used. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-10Merge tag 'sound-fix-3.15-rc1' of ↵Linus Torvalds39-174/+310
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a bunch of small fixes that have been collected since the previous pull request. In addition to various misc fixes, the following are included: - HD-audio quirks for Dell, HP, Chromebook, and ALC28x codecs - HD-audio AMD HDMI regression fix - Continued PM support/fixes for ice1712 driver - Multiplatform fixes for ASoC samsung drivers - Addition of device id tables to a few ASoC drivers - Bit clock polarity config and error flag fixes in ASoC fsl_sai" * tag 'sound-fix-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb() ALSA: hda - Make full_reset boolean ALSA: hda - add headset mic detect quirk for a Dell laptop sound: dmasound: use module_platform_driver_probe() ALSA: au1x00: use module_platform_driver() ALSA: hda - Use runtime helper to check active state. ALSA: ice1712: Fix boundary checks in PCM pointer ops ASoC: davinci-mcasp: Fix bit clock polarity settings ASoC: samsung: Fix build on multiplatform ASoC: fsl_sai: Fix Bit Clock Polarity configurations ALSA: hda - Do not assign streams in reverse order ALSA: hda/realtek - Add eapd shutup to ALC283 ALSA: hda/realtek - Change model name alias for ChromeOS ASoC: da732x: Print correct major id ALSA: hda/realtek - Improve HP depop when system change power state on Chromebook ASoC: cs42l52: Fix mask for REVID sound/oss: Remove uncompilable DBG macro use ALSA: ice1712: Save/restore routing and rate registers ALSA: ice1712: restore AK4xxx volumes on resume ASoC: alc56(23|32): fix undefined return value of probing code ...
2014-04-09ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()Tim Gardner1-1/+2
BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09Merge tag 'asoc-v3.15-5' of ↵Takashi Iwai19-39/+163
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.15 A smattering of device specific fixes, nothing stands out here except for the multiplatform fixes for Samsung and the device IDs being added by Stephen Warren - there's no real code changes from those and they give better robustness to the enumeration with DT.
2014-04-09ALSA: hda - Make full_reset booleanThierry Reding3-7/+7
The full_reset argument to azx_init_chip() carries boolean rather than numerical information, so update the type to reflect that. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0283, SID: 0x10280667), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09sound: dmasound: use module_platform_driver_probe()Christoph Jaeger1-13/+1
Eliminate boilerplate code by using module_platform_driver_probe(). Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: au1x00: use module_platform_driver()Christoph Jaeger1-12/+1
Eliminate boilerplate code by using module_platform_driver(). Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - Use runtime helper to check active state.Dylan Reid1-1/+1
From azx_interrupt, use the helper to check if the device is active instead of checking the state. This will do the right thing if runtime pm is disabled in addition to if the device is suspended. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09Merge remote-tracking branches 'asoc/fix/rt5640', 'asoc/fix/samsung', ↵Mark Brown10-18/+35
'asoc/fix/tlv320aic23' and 'asoc/fix/warn' into asoc-linus
2014-04-09Merge remote-tracking branches 'asoc/fix/alc5632', 'asoc/fix/cs42l52', ↵Mark Brown9-21/+128
'asoc/fix/cs42xxx8', 'asoc/fix/da732x', 'asoc/fix/davinci', 'asoc/fix/fsl-sai', 'asoc/fix/fsl-ssi' and 'asoc/fix/max98090' into asoc-linus
2014-04-08ALSA: ice1712: Fix boundary checks in PCM pointer opsTakashi Iwai1-5/+10
PCM pointer callbacks in ice1712 driver check the buffer size boundary wrongly between bytes and frames. This leads to PCM core warnings like: snd_pcm_update_hw_ptr0: 105 callbacks suppressed ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730 This patch fixes these checks to be placed after the proper unit conversions. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ASoC: davinci-mcasp: Fix bit clock polarity settingsPeter Ujfalusi1-3/+3
IB_NF, NB_IF and IB_IF configured the bc polarity incorrectly. The receive polarity was set to the same edge as the TX in these cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-08ASoC: samsung: Fix build on multiplatformSachin Kamat7-16/+18
PCM and S/PDIF drivers referenced mach headers for a trivial data structure. This caused build errors on multiplatform builds as machine headers are not accessible from driver files. Move the data structure definition to the driver header and remove the dependency. While at it rename the structure to avoid multiple definition errors as the same structure is also used by the platform code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-08ASoC: fsl_sai: Fix Bit Clock Polarity configurationsNicolin Chen1-4/+4
The BCP bit in TCR4/RCR4 register rules as followings: 0 Bit clock is active high with drive outputs on rising edge and sample inputs on falling edge. 1 Bit clock is active low with drive outputs on falling edge and sample inputs on rising edge. For all formats currently supported in the fsl_sai driver, they're exactly sending data on the falling edge and sampling on the rising edge. However, the driver clears this BCP bit for all of them which results click noise when working with SGTL5000 and big noise with WM8962. Thus this patch corrects the BCP settings for all the formats here to fix the nosie issue. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Acked-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-08ALSA: hda - Do not assign streams in reverse orderAnssi Hannula1-4/+5
Currently stream numbers are assigned in reverse order. Unfortunately commit 7546abfb8e1f9933b5 ("ALSA: hda - Increment default stream numbers for AMD HDMI controllers") assumed this was not the case (specifically, it had the "old cards had single device only" => "extra unused stream numbers do not matter" assumption), causing non-working audio regressions for AMD Radeon HDMI users. Change the stream numbers to be assigned in forward order. The benefit is that regular audio playback will still work even if the assumed stream count is too high, downside is that a too high stream count may remain hidden. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002 Reported-by: Christian Güdel <cg@dmesg.ch> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Christian Güdel <cg@dmesg.ch> # 3.14 Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ALSA: hda/realtek - Add eapd shutup to ALC283Kailang Yang1-0/+1
Add eapd shutup function to alc283_shutup. It could avoid pop noise from speaker. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ALSA: hda/realtek - Change model name alias for ChromeOSKailang Yang1-1/+1
Chrome OS was use model name of alc283-dac-wcaps for loading model as default. Change the model name to same as model name of Chrome OS for future support. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König2-2/+2
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07ASoC: da732x: Print correct major idAxel Lin1-1/+2
DA732X_ID_MAJOR_MASK is 0xF0, so the major id is (reg & DA732X_ID_MAJOR_MASK) >> 4. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-07ALSA: hda/realtek - Improve HP depop when system change power state on ↵Kailang Yang1-0/+4
Chromebook It is better to change Mic2-Vref to manual mode. Manual control Mic2-Vref will solve pop noise issue. It will improve pop noise for power on, power off, S3 and resume. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-07ASoC: cs42l52: Fix mask for REVIDAxel Lin2-2/+2
BIT[0:2] of register 01h is REVID, so the mask for REVID should be 0x7. Also updates the code to use CS42L52_CHIP_REV_MASK. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-06Merge tag 'drivers-3.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-04sound/oss: Remove uncompilable DBG macro useJoe Perches10-67/+2
Most of it duplicates function tracing and one of them has an uncompilable printf %P use. Others have format/argument mismatches. Remove unused DBG1 macro definition Neaten uart401.c use of ok test around this DBG macro removal. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-04ALSA: ice1712: Save/restore routing and rate registersOndrej Zary1-0/+32
Save/restore routing and rate registers during suspend/resume. This fixes S/PDIF input being disabled after resume. Tested with Audiophile 24/96. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 08:01:19 +0300