| Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 90ed688792a6b7012b3e8a2f858bc3fe7454d0eb ]
Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
unexpected behavior
Fix this by adding missing writable register defaults.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e64826e5e367ad45539ab245b92f009ee165025c ]
The ALC233 codec on these Medion NM14LNL (SPRCHRGD 14 S2) systems
requires a quirk to enable all speakers.
Tested-by: davplsm <davpal@yahoo.com>
Link: https://github.com/thesofproject/linux/issues/5611
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251212174658.752641-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2cb8ef0372665854fca6fa7b30b20dd35acffeb ]
Add a DMI quirk for the Honor MagicBook X16 2025 laptop
fixing the issue where the internal microphone was
not detected.
Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com>
Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da3a7efff64ec0d63af4499eea3a46a2e13b5797 ]
Maintenance patch for native DSD support.
Add set of missing device and vendor quirks; TEAC, Esoteric, Luxman and
Musical Fidelity.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251211152224.1780782-1-jussi@sonarnerd.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 826c0b1ed09e5335abcae07292440ce72346e578 ]
Laptops use 2 CS35L41 Amps with HDA, using External boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20251205150614.49590-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57d508b5f718730f74b11e0dc9609ac7976802d1 ]
'version' is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
rockchip_pdm.c:583:17: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit 49a4a8d12612 ("ASoC: rockchip: Fix
Wvoid-pointer-to-enum-cast warning") but then got bad in
commit 9958d85968ed ("ASoC: Use device_get_match_data()").
Discussion on LKML also pointed out that 'uintptr_t' is not the correct
type and either 'kernel_ulong_t' or 'unsigned long' should be used,
with several arguments towards the latter [1].
Link: https://lore.kernel.org/r/CAMuHMdX7t=mabqFE5O-Cii3REMuyaePHmqX+j_mqyrn6XXzsoA@mail.gmail.com/ [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203141644.106459-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 161a0c617ab172bbcda7ce61803addeb2124dbff upstream.
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Cc: Askar Safin <safinaskar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e340663bbf2a75dae5d4fddf90b49281f5c9df3f upstream.
After speaker id retrieval was refactored to happen in tas2781_read_acpi,
devices that do not use a speaker id need a negative speaker_id value
instead of NULL, but no initialization was added to the TAS2563 code path.
This causes the driver to attempt to load a non-existent firmware file name
with a speaker id of 0 ("TAS2XXX38700.bin") instead of the correct file
name without a speaker id ("TAS2XXX3870.bin"), resulting in low volume and
these dmesg errors:
tas2781-hda i2c-INT8866:00: Direct firmware load for TAS2XXX38700.bin failed with error -2
tas2781-hda i2c-INT8866:00: tasdevice_dsp_parser: load TAS2XXX38700.bin error
tas2781-hda i2c-INT8866:00: dspfw load TAS2XXX38700.bin error
[...]
tas2781-hda i2c-INT8866:00: tasdevice_prmg_load: Firmware is NULL
Fix this by setting speaker_id to -1 as is done for other models.
Fixes: 945865a0ddf3 ("ALSA: hda/tas2781: fix speaker id retrieval for multiple probes")
Cc: stable@vger.kernel.org
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://patch.msgid.link/20251222194704.87232-1-git@augustwikerfors.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 830988b6cf197e6dcffdfe2008c5738e6c6c3c0f upstream.
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review.
Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251219162845.657525-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81c53b52de21b8d5a3de55ebd06b6bf188bf7efd upstream.
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74cc4f3ea4e99262ba0d619c6a4ee33e2cd47f65 upstream.
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51e1 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfbb12dfa144d45575bcfe139a71360b3ce80237 upstream.
Do not stop a q6asm stream if its not started, this can result in
unnecessary dsp command which will timeout anyway something like below:
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
Fix this by correctly checking the state.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 950a4e5788fc7dc6e8e93614a7d4d0449c39fb8d upstream.
Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa8b ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2196e8172bee2002e9baaa0d02b2f9f2dd213949 upstream.
pm4125_bind() acquires references through pm4125_sdw_device_get() but
fails to release them in error paths and during normal unbind
operations. This could result in reference count leaks, preventing
proper cleanup and potentially causing resource exhaustion over
multiple bind/unbind cycles.
Calling path: pm4125_sdw_device_get() -> bus_find_device_by_of_node()
-> bus_find_device() -> get_device.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251116033716.29369-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0ff70e9d4fe46cece25eb97b9b9b0166624af95 upstream.
When trying to get the system name in the _HID path, after successfully
retrieving the subsystem ID the return value isn't set to 0 but instead
still kept at -ENODATA, leading to a false negative:
[ 12.382507] cs35l41 spi-VLV1776:00: Subsystem ID: VLV1776
[ 12.382521] cs35l41 spi-VLV1776:00: probe with driver cs35l41 failed with error -61
Always return 0 when a subsystem ID is found to mitigate these false
negatives.
Link: https://github.com/CachyOS/CachyOS-Handheld/issues/83
Fixes: 46c8b4d2a693 ("ASoC: cs35l41: Fallback to reading Subsystem ID property if not ACPI")
Cc: stable@vger.kernel.org # 6.18
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251206193813.56955-1-dnaim@cachyos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcba17279327c6e85dee6a97014dc642e2dc93cc upstream.
For some reason we endedup allocating sdw_stream_runtime for every cpu dai,
this has two issues.
1. we never set snd_soc_dai_set_stream for non soundwire dai, which
means there is no way that we can free this, resulting in memory leak
2. startup and shutdown callbacks can be called without
hw_params callback called. This combination results in memory leak
because machine driver sruntime array pointer is only set in hw_params
callback.
Fix this by
1. adding a helper function to get sdw_runtime for substream
which can be used by shutdown callback to get hold of sruntime to free.
2. only allocate sdw_runtime for soundwire dais.
Fixes: d32bac9cb09c ("ASoC: qcom: Add helper for allocating Soundwire stream runtime")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com> # Thinkpad X13s
Link: https://patch.msgid.link/20251022143349.1081513-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c63b5a8ed972a2c8c03d984f6a43349007cea93 upstream.
SM6115 does have soundwire controller in tx. For some reason
we ended up with this incorrect patch.
Fix this by adding the flag to reflect this in SoC data.
Fixes: 510c46884299 ("ASoC: codecs: lpass-tx-macro: Add SM6115 support")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031120703.590201-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e65b871c9b5af9265aefc5b8cd34993586d93aab upstream.
Component bind uses devm_regmap_add_irq_chip() to add IRQ chip, so it
will be removed only during driver unbind, not component unbind.
A component unbind-bind cycle for the same Linux device lifetime would
result in two chips added. Fix this by manually removing the IRQ chip
during component unbind.
Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-asoc-regmap-irq-chip-v1-2-17ad32680913@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd94857a934cbe613353810a024c84d54826ead3 upstream.
Qualcomm PM4125 codec is always a single device on the board, however
nothing stops board designers to have two of them, thus same device
driver could probe twice.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
component bind in 'irq_drv_data' member a pointer to per-probe state
container ('struct pm4125_priv').
Second component bind would overwrite the 'irq_drv_data' from previous
device probe, so interrupts would be executed in wrong context.
The fix makes use of currently unused 'struct pm4125_priv' member
'pm4125_regmap_irq_chip', but renames it to a shorter name.
Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-asoc-regmap-irq-chip-v1-1-17ad32680913@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 578ccfe344c5f421c2c6343b872995b397ffd3ff upstream.
In wcd937x_bind(), the driver calls of_sdw_find_device_by_node() to
obtain references to RX and TX SoundWire devices, which increment the
device reference counts. However, the corresponding put_device() are
missing in both the error paths and the normal unbind path in
wcd937x_unbind().
Add proper error handling with put_device() calls in all error paths
of wcd937x_bind() and ensure devices are released in wcd937x_unbind().
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 772ed12bd04e ("ASoC: codecs: wcdxxxx: use of_sdw_find_device_by_node helper")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251116061623.11830-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bae7beda19f3b2dc6ab2062c94df19c27923712 upstream.
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 52a525011cb8e293799a085436f026f2958403f9 upstream.
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23261f0de09427367e99f39f588e31e2856a690e upstream.
The reference taken to the sync provider OF node when probing the
platform device is currently only dropped if the set_sync() callback
fails during DAI probe.
Make sure to drop the reference on platform probe failures (e.g. probe
deferral) and on driver unbind.
This also avoids a potential use-after-free in case the DAI is ever
reprobed without first rebinding the platform driver.
Fixes: 5914d285f6b7 ("ASoC: stm32: sai: Add synchronization support")
Fixes: d4180b4c02e7 ("ASoC: stm32: sai: fix set_sync service")
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: stable@vger.kernel.org # 4.16: d4180b4c02e7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 312ec2f0d9d1a5656f76d770bbf1d967e9289aa7 upstream.
Make sure to unprepare the parent clock also on probe failures (e.g.
probe deferral).
Fixes: a14bf98c045b ("ASoC: stm32: sai: fix possible circular locking")
Cc: stable@vger.kernel.org # 5.5
Cc: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e26ff429eaf10c4ef1bc3dabd9bf27eb54b7e1f4 upstream.
Make sure to drop the reference taken when looking up the sync provider
device and its driver data during DAI probe on probe failures and on
unbind.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
Fixes: 1c3816a19487 ("ASoC: stm32: sai: add missing put_device()")
Cc: stable@vger.kernel.org # 4.16: 1c3816a19487
Cc: olivier moysan <olivier.moysan@st.com>
Cc: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86dc090f737953f16f8dc60c546ae7854690d4f6 upstream.
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391cea0 ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 816f291fc23f325d31509d0e97873249ad75ae9a upstream.
SSP/DMIC blobs have no support for FLOAT type, they are using S32 on data
bus.
Convert the format from FLOAT_LE to S32_LE to make sure that the correct
format is used within the path.
FLOAT conversion will be done on the host side (or within the path).
Fixes: f7c41911ad74 ("ASoC: SOF: ipc4-topology: Add support for float sample type")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215120648.4827-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7cede182c963720edd1e5fb50ea4f1c7eafa30e upstream.
By default, these devices use the quirk ALC294_FIXUP_ASUS_SPK. Not
using it causes the headphone jack to stop working. Therefore,
introduce a new quirk ALC287_FIXUP_TXNW2781_I2C_ASUS that binds
to the TAS amplifier while using that quirk.
Cc: stable@kernel.org
Fixes: 18a4895370a7 ("ALSA: hda/realtek: Add match for ASUS Xbox Ally projects")
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251216211714.1116898-1-lkml@antheas.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26e455064983e00013c0a63ffe0eed9e9ec2fa89 upstream.
With the introduction of 8-bit formats the DMIC blob lookup also needs to
be modified to prefer the 32-bit blob when 8-bit format is used on FE.
At the same time we also need to make sure that in case 8-bit format is
used, but only 16-bit blob is available for DMIC then we will not try to
look for 8-bit blob (which is invalid) as fallback, but for a 16-bit one.
Fixes: c04c2e829649 ("ASoC: SOF: ipc4-topology: Add support for 8-bit formats")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215120648.4827-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 095d621141826a2841dae85b52c784c147ea99d3 ]
SX controls are currently broken, since the clamp introduced in
commit a0ce874cfaaa ("ASoC: ops: improve snd_soc_get_volsw") does not
handle SX controls, for example where the min value in the clamp is
greater than the max value in the clamp.
Add clamp parameter to prevent clamping in SX controls.
The nature of SX controls mean that it wraps around 0, with a variable
number of bits, therefore clamping the value becomes complicated and
prone to error.
Fixes 35 kunit tests for soc_ops_test_access.
Fixes: a0ce874cfaaa ("ASoC: ops: improve snd_soc_get_volsw")
Co-developed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251216134938.788625-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b0f3f9ee41ee2bdd206667f85ea2aa36dfe6e69 ]
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 095d62114182 ("ASoC: ops: fix snd_soc_get_volsw for sx controls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00b960a83c764208b0623089eb70af3685e3906f ]
The reset_control handler has the reference count for usage, as there is
reset operation in runtime suspend and resume, then reset operation in
probe() would cause the reference count of reset not balanced.
Previously add reset operation in probe and remove is to fix the compile
issue with !CONFIG_PM, as the driver has been update to use
RUNTIME_PM_OPS(), so that change can be reverted.
Fixes: 1e0dff741b0a ("ASoC: ak4458: remove "reset-gpios" property handler")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251216070201.358477-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5526c1c6ba1d0913c7dfcbbd6fe1744ea7c55f1e ]
get_meter_levels_from_urb() parses the 64-byte meter packets sent by
the device and fills the per-channel arrays meter_level[],
comp_level[] and master_level[] in struct snd_us16x08_meter_store.
Currently the function derives the channel index directly from the
meter packet (MUB2(meter_urb, s) - 1) and uses it to index those
arrays without validating the range. If the packet contains a
negative or out-of-range channel number, the driver may write past
the end of these arrays.
Introduce a local channel variable and validate it before updating the
arrays. We reject negative indices, limit meter_level[] and
comp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[]
updates with ARRAY_SIZE(master_level).
Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Reported-by: DARKNAVY (@DarkNavyOrg) <vr@darknavy.com>
Closes: https://lore.kernel.org/tencent_21C112743C44C1A2517FF219@qq.com
Signed-off-by: Shipei Qu <qu@darknavy.com>
Link: https://patch.msgid.link/20251217024630.59576-1-qu@darknavy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5032347c04ba7ff9ba878f262e075d745c06a2a8 ]
When pdacf_config() fails, snd_pdacf_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the card
list entry when pdacf_config() fails.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215090433.211-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a03b40deacbd293ac9aed0f9b11197dad54fe5f ]
When vxpocket_config() fails, vxpocket_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the
allocation bit when vxpocket_config() fails.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215042652.695-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f4d0899efd9892fc7514c9488270e1bb7dedd2b ]
If SAI works in master mode it will generate clocks for external codec
from audio PLLs. Thus sample rates should be constrained according to
audio PLL clocks. While SAI works in slave mode which means clocks are
generated externally then constraints are independent of audio PLLs.
Fixes: 4edc98598be4 ("ASoC: fsl_sai: Add sample rate constraint")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20251210062109.2577735-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0c4a13ba88594fd4a27292853e736c6b4349823d upstream.
The wavefront_send_sample() function has an integer overflow issue
when validating sample size. The header->size field is u32 but gets
cast to int for comparison with dev->freemem
Fix by using unsigned comparison to avoid integer overflow.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B47789D1B060CE8BF4C3AFC2A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e11c5c13ce0ab2325d38fe63500be1dd88b81e38 upstream.
Clear substream pointers in close functions to avoid leaving dangling
pointers, helping to improve code safety and
prevents potential issues.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881DF762CAB45EE42F6D812AFC2A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c34b04cc6178f33c08331568c7fd25c5b9a39f66 upstream.
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251202101338.11437-1-arefev@swemel.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 945865a0ddf3e3950aea32e23e10d815ee9b21bc upstream.
Currently, on ASUS projects, the TAS2781 codec attaches the speaker GPIO
to the first tasdevice_priv instance using devm. This causes
tas2781_read_acpi to fail on subsequent probes since the GPIO is already
managed by the first device. This causes a failure on Xbox Ally X,
because it has two amplifiers, and prevents us from quirking both the
Xbox Ally and Xbox Ally X in the realtek codec driver.
It is unnecessary to attach the GPIO to a device as it is static.
Therefore, instead of attaching it and then reading it when loading the
firmware, read its value directly in tas2781_read_acpi and store it in
the private data structure. Then, make reading the value non-fatal so
that ASUS projects that miss a speaker pin can still work, perhaps using
fallback firmware.
Fixes: 4e7035a75da9 ("ALSA: hda/tas2781: Add speaker id check for ASUS projects")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Baojun Xu <baojun.xu@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251026191635.2447593-1-lkml@antheas.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18a4895370a79a3efb4a53ccd1efffef6c5b634e upstream.
Bind the realtek codec to TAS2781 I2C audio amps on ASUS Xbox Ally
projects. While these projects work without a quirk, adding it increases
the output volume significantly.
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251026191635.2447593-2-lkml@antheas.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 324f3e03e8a85931ce0880654e3c3eb38b0f0bba upstream.
The function detect_stream_formats() reads the stream_count value directly
from a FireWire device without validating it. This can lead to
out-of-bounds writes when a malicious device provides a stream_count value
greater than MAX_STREAMS.
Fix by applying the same validation to both TX and RX stream counts in
detect_stream_formats().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 58579c056c1c ("ALSA: dice: use extended protocol to detect available stream formats")
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B043FC68B4C0DA40B73DAFDCA@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f34836a8ddf9216ff919927cddb705022bf30aab ]
TDM channel updates were applied to all DAIs, causing configurations
to overwrite for unrelated streams. The logic is modified to update
channels only for targeted DAI. This prevents corruption of other DAI
settings and resolves audio issues observed during system suspend and
resume cycles.
Fixes: 12229b7e50cf ("ASoC: amd: acp: Add TDM support for acp i2s stream")
Signed-off-by: Hemalatha Pinnamreddy <hemalatha.pinnamreddy2@amd.com>
Signed-off-by: Raghavendra Prasad Mallela <raghavendraprasad.mallela@amd.com>
Link: https://patch.msgid.link/20251203120136.2591395-1-raghavendraprasad.mallela@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 298e753880b6ea99ac30df34959a7a03b0878eed ]
In the DSP event handling code, a put_user() loop copies event data.
When the user buffer size is not aligned to 4 bytes, it could overwrite
beyond the buffer boundary.
Fix by adding a bounds check before put_user().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788112C72AF8A1C8C448B4B8AFA3A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 210d77cca3d0494ed30a5c628b20c1d95fa04fb1 ]
The DSP event handling code in hwdep_read() could write more bytes to
the user buffer than requested, when a user provides a buffer smaller
than the event header size (8 bytes).
Fix by using min_t() to clamp the copy size, This ensures we never copy
more than the user requested.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78810656377E79E58350D951AFD9A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f8f726a2a29c28f65b30880335a1610c5e63594 ]
Disable regulator in runtime resume when error happens to balance
the reference count of regulator.
Fixes: 2ff6d5a108c6 ("ASoC: ak5558: Add regulator support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251203100529.3841203-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae585fabb9713a43e358cf606451386757225c95 ]
Disable regulator in runtime resume when error happens to balance
the reference count of regulator.
Fixes: 7e3096e8f823 ("ASoC: ak4458: Add regulator support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251203100529.3841203-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ee257aba1d56c3f0f1028669a8ad0f1a477f05b ]
Audio fails to resume after system exits suspend mode
due to accessing incorrect ring buffer address during
resume. This patch resolves issue by selecting correct
address based on the ACP version.
Fixes: f6f7d25b11033 ("ASoC: amd: acp: Add pte configuration for ACP7.0 platform")
Signed-off-by: Hemalatha Pinnamreddy <hemalatha.pinnamreddy2@amd.com>
Signed-off-by: Raghavendra Prasad Mallela <raghavendraprasad.mallela@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251203064650.2554625-1-raghavendraprasad.mallela@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ebbd45c33d0049ebf5a22c1434567f0c420b333 ]
bcm63xx_soc_pcm_new() does not check the return value of
of_dma_configure(), which may fail with -EPROBE_DEFER or
other errors, allowing PCM setup to continue with incomplete
DMA configuration.
Add error checking for of_dma_configure() and return on failure.
Fixes: 88eb404ccc3e ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251202101642.492-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86a5b621be658fc8fe594ca6db317d64de30cce1 ]
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b327d ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|