summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)AuthorFilesLines
2019-03-01ALSA: usb-audio: Add quirk for MOTU MicroBook IIManuel Reinhardt3-0/+170
Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready. This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings: - The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k. - The various mixer controls of the MicroBook are not made available. - The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this) - The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device. Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-18ALSA: usb-audio: Expose sample resolution through proc interfaceJussi Laako3-0/+4
At least some USB devices use (MSB-aligned) audio format larger than the actual resolution of the device. In order to expose the actual device resolution (bBitResolution), add extra field to the procfs stream info interface. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-08Merge branch 'for-linus' into for-nextTakashi Iwai2-1/+9
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-08Merge branch 'topic/memory-device-fixes-2' into for-nextTakashi Iwai2-22/+18
Pull further device memory allocation cleanups (but no API change yet). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-07ALSA: usb-audio: Fix implicit fb endpoint setup by quirkManuel Reinhardt1-1/+8
The commit a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06ALSA: usb: Clean up with new procfs helpersTakashi Iwai3-16/+10
Simplify the proc fs creation code with new helper functions, snd_card_ro_proc_new() and snd_card_rw_proc_new(). Just a code refactoring and no functional changes. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06ALSA: usb: Drop superfluous PCM preallocation error checksTakashi Iwai2-22/+18
snd_pcm_lib_preallocate_pages() and co always succeed, so the error check is simply redundant. Drop it. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-05ALSA: usb-audio: Add support for new T+A USB DACUdo Eberhardt1-0/+1
This patch adds the T+A VID to the generic check in order to enable native DSD support for T+A devices. This works with the new T+A USB DAC model SD3100HV and will also work with future devices which support the XMOS/Thesycon style DSD format. Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-29ALSA: usb-audio: Cleanup DSD whitelistJussi Laako1-16/+2
XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting separate from the PCM ones. Thus the DSD altsetting can be auto-detected based on the flag and doesn't need maintaining specific altsetting whitelist. In addition, static VID:PID-to-altsetting whitelisting causes problems when firmware update changes the altsetting, or same VID:PID is reused for another device that has different kind of firmware. This patch removes existing explicit whitelist mappings for XMOS VID (0x20b1) and Thesycon VID (0x152a). Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list sorted based on VID. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-29Merge branch 'for-linus' into for-nextTakashi Iwai1-1/+2
Pull 5.0 branch for further development of USB-audio quirks Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-25ALSA: usb-audio: Add Opus #3 to quirks for native DSD supportOlek Poplavsky1-0/+1
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit') in order to enable Native DSD support. [ NOTE: this could be handled in the generic way with fp->dvd_raw if we add 0x10cb to the vendor whitelist, but since 0x10cb shows a different vendor name (Erantech), put to the individual entry at this time -- tiwai ] Signed-off-by: Olek Poplavsky <woodenbits@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-18Merge branch 'topic/pcm-device-suspend' into for-nextTakashi Iwai2-4/+1
Pull the PCM suspend improvement / cleanup. This moves the most of snd_pcm_suspend*() calls into PCM's own device PM ops. There should be no change from the functionality POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-15ALSA: usb: Remove superfluous snd_pcm_suspend*() callsTakashi Iwai2-4/+1
The call of snd_pcm_suspend_all() & co became superfluous since we call it in the PCM PM ops. Let's remove them. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-09ALSA: usb-audio: Remove set but not used variable 'first_ch_bits'YueHaibing1-5/+1
Fixes gcc '-Wunused-but-set-variable' warning: sound/usb/mixer.c: In function 'parse_audio_feature_unit': sound/usb/mixer.c:1838:28: warning: variable 'first_ch_bits' set but not used [-Wunused-but-set-variable] It never used since 2.6 Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-09ALSA: usb-audio: fix CM6206 register definitionsAmadeusz Sławiński1-1/+1
fix typo after a recent commit causing headphones to have no sound Fixes: ad43d528a7ac (ALSA: usb-audio: Define registers for CM6206) Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: line6: fix check on snd_card_registerAditya Pakki1-1/+2
The fix checks if snd_card_register() fails, and if so logs the error via dev_err() consistent with other patches. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirksHui Peng1-0/+6
In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Always check descriptor sizes in parser codeTakashi Iwai3-12/+30
There are a few places where we access the data without checking the actual object size from the USB audio descriptor. This may result in OOB access, as recently reported. This patch addresses these missing checks. Most of added codes are simple bLength checks in the caller side. For the input and output terminal parsers, we put the length check in the parser functions. For the input terminal, a new argument is added to distinguish between UAC1 and the rest, as they treat different objects. Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reported-by: Hui Peng <benquike@163.com> Tested-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Check mixer unit descriptors more strictlyTakashi Iwai1-4/+11
We've had some sanity checks of the mixer unit descriptors but they are too loose and some corner cases are overlooked. Add more strict checks in uac_mixer_unit_get_channels() for avoiding possible OOB accesses by malformed descriptors. This also changes the semantics of uac_mixer_unit_get_channels() slightly. Now it returns zero for the cases where the descriptor lacks of bmControls instead of -EINVAL. Then the caller side skips the mixer creation for such unit while it keeps parsing it. This corresponds to the case like Maya44. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()Takashi Iwai1-2/+8
The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-07Merge branch 'for-linus' into for-nextTakashi Iwai3-1/+15
Back-merge for applying the more HD-audio quirks on top of the latest code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-03ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.cHui Peng1-1/+4
If a USB sound card reports 0 interfaces, an error condition is triggered and the function usb_audio_probe errors out. In the error path, there was a use-after-free vulnerability where the memory object of the card was first freed, followed by a decrement of the number of active chips. Moving the decrement above the atomic_dec fixes the UAF. [ The original problem was introduced in 3.1 kernel, while it was developed in a different form. The Fixes tag below indicates the original commit but it doesn't mean that the patch is applicable cleanly. -- tiwai ] Fixes: 362e4e49abe5 ("ALSA: usb-audio - clear chip->probing on error exit") Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29ALSA: usb-audio: Add SMSL D1 to quirks for native DSD supportTony Das1-0/+1
This patch adds quirk VID/PID IDs for the SMSL D1 in order to enable Native DSD support. [ Moved the added entry in numerical order -- tiwai ] Signed-off-by: Tony Das <tdas444@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28ALSA: usb-audio: Add vendor and product name for Dell WD19 DockHui Wang1-0/+10
Like the Dell WD15 Dock, the WD19 Dock (0bda:402e) doens't provide useful string for the vendor and product names too. In order to share the UCM with WD15, here we keep the profile_name same as the WD15. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-06ALSA: usb-audio: Define registers for CM6206Linus Walleij1-5/+124
The register map for CM6206 is known and we can define what the values written to the different registers actually mean. I tested to print the hex values before/after this change, there is no functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-12ALSA: caiaq: Add fall-through annotationTakashi Iwai1-0/+1
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, add the "fall through" annotation in caiaq driver. Note that this seems necessary to be put exactly before the next label, so it's outside the ifdef block. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-05ALSA: usb-audio: Add custom mixer status quirks for RME CC devicesJussi Laako1-0/+381
Adds several vendor specific mixer quirks for RME's Class Compliant USB devices. These provide extra status information from the device otherwise not available. These include AES/SPDIF rate and status information, current system sampling rate and measured frequency. This information is especially useful in cases where device's clock is slaved to external clock source. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: usb-audio: update quirk for B&W PX to remove microphoneNicolas Huaman1-7/+2
A quirk in snd-usb-audio was added to automate setting sample rate to 4800k and remove the previously exposed nonfunctional microphone for the Bowers & Wilkins PX: commit 240a8af929c7c57dcde28682725b29cf8474e8e5 https://lore.kernel.org/patchwork/patch/919689/ However the headphones where updated shortly after that to remove the unintentional microphone functionality. I guess because of this the headphones now crash when connecting them via USB while the quirk is active. Dmesg: snd-usb-audio: probe of 2-3:1.0 failed with error -22 usb 2-3: 2:1: cannot get min/max values for control 2 (id 2) This patch removes the microfone and allows the headphones to connect and work out of the box. It is based on the current mainline kernel and successfully applied an tested on my machine (4.18.10.arch1-1). Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Nicolas Huaman <nicolas@herochao.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: rawmidi: A lightweight function to discard pending bytesTakashi Iwai1-2/+1
For discarding the pending bytes on rawmidi, we process with a loop of snd_rawmidi_transmit() which is just a waste of CPU power. Implement a lightweight API function to discard the pending bytes and the proceed the ring buffer instantly, and use it instead of open codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-09ALSA: usb-audio: Mark expected switch fall-throughGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357413 ("Missing break in switch") Addresses-Coverity-ID: 114917 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-02ALSA: usb-audio: Fix invalid use of sizeof in parse_uac_endpoint_attributes()Wei Yongjun1-1/+1
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-01ALSA: usb: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115084 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-01ALSA: usb-audio: remove redundant pointer 'urb'Colin Ian King1-2/+0
Pointer 'urb' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'urb' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-31ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacksJorge Sanjuan2-6/+24
Make use of UAC3 Power Domains associated to an Audio Streaming path within the PCM's logic. This means, when there is no audio being transferred (pcm is closed), the host will set the Power Domain associated to that substream to state D1. When audio is being transferred (from hw_params onwards), the Power Domain will be set to D0 state. This is the way the host lets the device know which Terminal is going to be actively used and it is for the device to manage its own internal resources on that UAC3 Power Domain. Note the resume method now sets the Power Domain to D1 state as resuming the device doesn't mean audio streaming will occur. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-31ALSA: usb-audio: Add UAC3 Power Domains to suspend/resumeJorge Sanjuan3-0/+59
Set the UAC3 Power Domain state for an Audio Streaming interface to D2 state before suspending the device (usb_driver callback). This lets the device know there is no intention to use any of the Units in the Audio Function and that the host is not going to even listen for wake-up events (interrupts) on the units. When the usb_driver gets resumed, the state D0 (fully powered) will be set. This ties up the UAC3 Power Domains to the runtime PM. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-31ALSA: usb-audio: AudioStreaming Power Domain parsingJorge Sanjuan2-8/+60
Power Domains in the UAC3 spec are mainly intended to be associated to an Input or Output Terminal so the host changes the power state of the entire capture or playback path within the topology. This patch adds support for finding Power Domains associated to an Audio Streaming Interface (bTerminalLink) and adds a reference to them in the usb audio substreams (snd_usb_substream). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-31ALSA: usb-audio: Initial Power Domain supportJorge Sanjuan3-0/+124
Thee USB Audio Class 3 (UAC3) introduces Power Domains as a new feature to let a host turn individual parts of an audio function to different power states via USB requests. This lets the device get to know a bit amore about what the host is up to in order to optimize power consumption efficiently. The Power Domains are optional for UAC3 configuration but all UAC3 devices shall include at least one BADD configuration where the support for Power Domains is compulsory. This patch adds a set of features/helpers to parse these power domains and change their status. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: usb-audio: quirks: Replace mdelay() with msleep() and usleep_range()Jia-Ju Bai1-7/+7
snd_usb_select_mode_quirk(), snd_usb_set_interface_quirk() and snd_usb_ctl_msg_quirk() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: usb-audio: Declare the common variable in header fileTakashi Iwai2-2/+2
Declare snd_usb_feature_unit_ctl properly in mixer.h. Otherwise it's error-prone. This fixes the sparse warning: sound/usb/mixer.c:1464:25: warning: symbol 'snd_usb_feature_unit_ctl' was not declared. Should it be static? Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macroTakashi Iwai1-1/+2
AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: usb-audio: Add support for Encore mDSD USB DACJeff Crukley1-0/+1
This patch adds native DSD playback support for the Encore mDSD USB DAC by specifying the vendor and product ID's Signed-off-by: Jeff Crukley <jcrukley@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-23ALSA: usb-audio: Generic DSD detection for Thesycon-based implementationsYue Wang1-0/+1
Thesycon provides solutions to XMOS chips, and has its own device vendor id. In this patch, we use generic method to detect DSD capability of Thesycon-based UAC2 implementations in order to support a wide range of current and future devices. The patch will enable the SNDRV_PCM_FMTBIT_DSD_U32_BE bit for the DAC hence enable native DSD playback up to DSD512 format. Signed-off-by: Yue Wang <yuleopen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-19ALSA: usb-audio: Allow changing from a bad sample rateAdam Goode1-3/+21
If the audio device is externally clocked and set to a rate that does not match the external clock, the clock will never be valid and we cannot set the rate successfully. To fix this, allow a rate change even if the clock is initially invalid, and validate again after the rate is changed. This fixes problems with MOTU UltraLite AVB hardware over USB. Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()Takashi Iwai5-7/+0
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with somewhat special for vmalloc handling, but in the end, this turned to just the default handler, i.e. NULL. As the situation has never changed over decades, let's rip it off. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Tidy up logic for Processing Unit min/max valuesJorge Sanjuan1-17/+41
This patch refactors the processing units min/max calculation logic for the mixer controls and fixes an issue where the Mode Select checking of the Up/Down mixers doesn't differentiate between the UAC1 and UAC2 Control Selector (0x02) and the UAC3 one which is different (0x01). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Unify virtual type units type to UAC3 valuesJorge Sanjuan1-13/+23
The Audio Control interface descriptor subtypes do not match across all the UAC versions. That makes reusability of the "virtual type" (Mixer, Processors, Selectors, etc) terminals difficult. It also makes the mixer get the default names for the virtual terminals wrong due to the overlap. This patch proposes an unified approach by always using the most comprehensive spec version to define them all (in this case UAC3). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Add support for Processing Units in UAC3Jorge Sanjuan1-2/+49
This patch adds support for the Processig Units defined in the UAC3 spec. The main difference with the previous specs is the lack of on/off switches in the controls for these units and the addiction of the new Multi Function Processing Unit. The current version of the UAC3 spec doesn't define any useful controls for the new Multi Function Processing Unit so no control will get created once this unit is parsed. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Processing Unit controls parsing in UAC2Jorge Sanjuan1-2/+15
Current support for UAC2 Processing Units does the parsing as one control per bit in the bitmap. However, the UAC2 spec defines the controls as bit pairs where b01 means read-only and b11 means read/write control. This patch fixes that and uses the helper functions for checking controls readability/writability when the control is defined as bit pairs (UAC2 and UAC3). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Add support for Selector Units in UAC3Jorge Sanjuan1-10/+44
This patch add support for Selector Units and Clock Selector Units defined in the new UAC3 spec. Selector Units play a really important role in the new UAC3 spec as Processing Units do not define an on/off switch control anymore. This forces topology designers to add bypass paths in the topology to enable/dissable the Processing Units. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-02ALSA: usb-midi: use irqsave() in USB's complete callbackJohn Ogness1-2/+3
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 00:24:06 +0300