summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2011-10-27Merge branch 'topic/remove-irqf_disable' into for-linusTakashi Iwai101-1152/+6032
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen1-1/+2
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-23ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is activeJarkko Nikula1-0/+6
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37. CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream. This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON(). Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang6-6/+6
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-21ASoC: Ensure we generate a driver nameMark Brown1-3/+15
Commit 873bd4c (ASoC: Don't set invalid name string to snd_card->driver field) broke generation of a driver name for all ASoC cards relying on the automatic generation of one. Fix this by using the old default with spaces replaced by underscores. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Takashi Iwai <tiwai@suse.de>
2011-09-20Merge branch 'for-3.1' into for-3.2Mark Brown1-26/+0
2011-09-20ASoC: ssm2602: Do not dereference codec->control_dataLars-Peter Clausen1-2/+1
The driver assumes that control_data points to the drivers i2c_client struct, but this is no longer the case since the ASoC core has switched to regmap. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: fsl: Fix error handling if platform_device_add failsAxel Lin2-2/+2
Call platform_device_put() instead of platform_device_unregister() if platform_device_add() fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: Remove bitrotted wm8962_resume()Mark Brown1-26/+0
This functionality is now subsumed within the bias management, using the standard cache management functionality, without assuming the cache type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20ASoC: Refcount WM8996 bandgap from FLL tooMark Brown1-6/+39
For digital only paths we need to make sure the bandgap is enabled prior to starting the FLL which isn't tied into DAPM. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20ASoC: Fix unused variable warning in WM8996Mark Brown1-2/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20ASoC: twl6040: Correct supported number of playback channelsPeter Ujfalusi1-1/+1
twl6040 supports 5 playback, and 2 capture channels Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Fix the number of channels for vibraPeter Ujfalusi1-2/+2
Only mono audio can be used for vibra (DL4 channel). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Use chip defaults in the initial reg_cachePeter Ujfalusi1-2/+6
Reset the twl6040_reg array to hold the chip default values. The only changed values were for the microphone input selection. Select no input for the microphones in the twl6040_init_chip function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Chip initialization cleanupPeter Ujfalusi1-87/+13
There is no need to write to the vio registers at probe time, since most them either read only, or shared with MFD or not used. On the other hand it is a good idea to updated the ASICREV register in the cache at this time. After power up we need to restore some registers. Clean up the list to contain only the registers we are going to restore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19ASoC: mxs-saif: add record functionDong Aisheng2-14/+135
1. add different clkmux mode handling SAIF can use two instances to implement full duplex (playback & recording) and record saif may work on EXTMASTER mode which is using other saif's BITCLK&LRCLK. The clkmux mode could be set in pdata->init() in mach-specific code. For generic saif driver, it only needs to know who is his master and the master id is also provided in mach-specific code. 2. support playback and capture simutaneously however the sample rates can not be different due to hw limitation. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19ASoC: sn95031: Staticize sn95031_pcm_hw_paramsAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19ASoC: Add line loads to the list of supported detections for SpeysideMark Brown1-1/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-19ASoC: Initial WM8996 headphone impedance measurement supportMark Brown1-25/+112
The WM8996 can measure the impedance of accessories connected to the headphone output. Implement initial support for this, measuring the left channel impedance when an accessory is detected and using this to distinguish between a line load and a headphone load. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-19ASoC: WM8996 only needs bandgap for analogue functionalityMark Brown1-11/+29
Rather than managing the bandgap in the bias level control use a supply widget as we only actually need to enable it for analogue paths, not fully digital ones. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-19ASoC: Display the error code when we fail to add a DAPM controlMark Brown1-2/+2
Useful for diagnostics. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-16ASoC: support all possible sample rates in the WM8776 driverTimur Tabi1-7/+6
The WM8776 supports a continuous range of sample rates rather than discrete values and supports a wider range of sample rates on the playback path than is currently supported. Update the constraints on the DAIs to reflect this. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: wm8995: Remove unused i2c variable in wm8995_remove()Axel Lin1-2/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: wm8995: Return -EINVAL if device ID mismatchAxel Lin1-0/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: tpa6130a2: Remove obsolete cleanup for clientdataAxel Lin1-1/+0
The i2c core will clear the clientdata pointer automatically, we don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: davinci-pcm: trivial: replace link with actual chan/linkBen Gardiner1-64/+59
The ambiguously named variable 'link' is used as a temporary throughout davinci-pcm -- its presence makes grepping (and groking) the code difficult. Replace link with the value of link in almost all sites. The exception is a couple places where the last-assigned link/chan needs to be returned by a function -- in these cases, rename to last_link. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: edb93xx: convert to use snd_soc_register_card()Mika Westerberg1-27/+33
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: simone: convert to use snd_soc_register_card()Mika Westerberg1-28/+36
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. In addition we use platform_device_register_simple() to create a platform device for the codec. This function will handle putting and deleting the device automatically which simplifies the error handling in the machine driver. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: ep93xx-pcm: add MODULE_ALIASMika Westerberg1-0/+1
To get the PCM module loaded automatically by udev et al. we need to add a proper MODULE_ALIAS. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: snappercl15: convert to use snd_soc_register_card()Mika Westerberg1-17/+36
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: support sample sizes properly in the WM8776 codec driverTimur Tabi1-12/+13
Use snd_pcm_format_width() to determine the sample size, instead of checking specify sample formats and assuming that those are the only valid format. This change adds support for big-endian architectures (which use the _BE formats) and the packed 24-bit format (SNDRV_PCM_FORMAT_S24_3xE). [Fixed single letter variable name legibility problem -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16Merge branch 'for-3.1' into for-3.2Mark Brown2-2/+2
2011-09-16ASoC: Fix WM8996 DC servo operation without IRQMark Brown1-6/+3
We need to count the timeout down. Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-16ASoC: bf5xx-ad73311: Fix prototype for bf5xx_probeAxel Lin1-1/+1
Fix below build warning: sound/soc/blackfin/bf5xx-ad73311.c: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: samsung: Fix checking return value of clk_getAxel Lin3-8/+8
clk_get() returns a pointer to the struct clk or an ERR_PTR(). This patch also use PTR_ERR() for return value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: improve asynchronous mode support in the fsl_ssi driverTimur Tabi1-77/+68
The Freescale SSI audio controller supports "synchronous" and "asynchronous" modes. In synchronous mode, playback and capture use the same input clock, so sample rates must be the same during simultaneous playback and capture. Unfortunately, the code which supports asynchronous mode is just broken in various ways. In particular, it was constraining sample sizes as well as the sample rate. The fix also allows us to simplify the code by eliminating the 'asynchronous', 'playback', and 'capture' variables that were used to keep track of playback and capture streams. Unfortunately, it turns out that simulataneous playback and record does not actually work on the only platform that supports asynchronous mode: the Freescale P1022DS reference board. If a second stream is started, the SSI grinds to halt for both streams. This is true even if the P1022 is configured for synchronous mode, so it's likely a hardware problem that needs to be worked around. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-14ASoC: Correct channel numbers for WM8996 AIF2Mark Brown1-4/+4
The AIF1 channels are numbered from zero than one; do the same thing for AIF2 too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-14ASoC: Disable WM8996 CPVDD supply when not in useMark Brown1-8/+30
The WM8996 only requires CPVDD when the charge pump is active so control it separately to the other supplies, only enabling it when the charge pump is active. This will result in a small power saving on systems which are able to provide independent software control of the supply. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-12ASoC: Fix trivial build regression in Kirkwood I2SArnd Bergmann1-1/+1
A fix merged in 3.1-rc2 introduced a small regression, this should get it to build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: ad193x: Setup regmap read and write flag masks for SPILars-Peter Clausen2-28/+71
Currently register read-back for the ad193x is broken, because it expects bit 0 of the upper byte to be set to indicate a read operation, while the regmap default for SPI is to use bit 7. This patch also addresses another oddity of the device. There are SPI and I2C versions of this codec. In both cases the registers are 8-bit wide and numbered from 0x0 to 0x10, but in the SPI case there is also a so called 'global address' which is prefixed in-front of the register address. The global address mimics I2C behaviour and includes a static device address the and the read/write flag. This basically extends the register address to an 16-bit value numbered from 0x800 to 0x810. These are the register numbers which are currently used by the driver. This works, because I2C will ignore the upper 8 bits of the register, but it is still a bit confusing, as there are no such register numbers in the I2C case. The approach taken by this patch is to number the registers from 0x00 to 0x10 and encode the global address for SPI mode into the read and write flag masks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: playpaq_wm8510: Return proper error if clk_get failsAxel Lin1-1/+4
Return proper error instead of 0 if clk_get fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: sst_platform: fix memory leakLu Guanqun1-2/+6
snd_pcm_hw_constraint_integer() could return -1, in this case, sst platform is not opened successfully. However the corresponding close callback isn't able to be called later on to release these two allocated memories, thus resulting in memory leak. This patch moves the check for hardware contraints earlier, thus resolving this issue. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: sst_platform: using builtin functionLu Guanqun1-3/+4
Use the builtin snd_soc_set_runtime_hwparams() instead of assigning it by myself. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: sst_platform: trivial coding style fixLu Guanqun1-1/+1
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: ad1980: Return proper error if vendor id mismatchAxel Lin1-3/+7
Return -ENODEV instead of 0 if vendor id mismatch. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: Remove unused step size from debugfs CODEC write functionMark Brown1-4/+0
We don't use the step size so there's no need to work it out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-06ASoC: alc5623: Remove unused mutexAxel Lin1-2/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-06ASoC: Check that WM8996 FLL started even if we don't have the IRQMark Brown1-7/+19
We can directly read the FLL lock status on WM8996 so even if we don't have an interrupt wired up we can still verify that the FLL started successfully. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-06Merge branch 'for-3.1' into for-3.2Mark Brown2-3/+3
2011-09-06ASoC: Add missing platform_device_put in raumfeld_audio_init error pathAxel Lin1-1/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 02:11:12 +0300